Refreshed all patches.
Altered patches:
- 210-dwc2_defaults.patch
- 708-mc-bus-support-layerscape.patch
Fixes:
- CVE-2020-25656
Compile-tested on: ar71xx, cns3xxx, imx6, x86_64
Runtime-tested on: ar71xx, cns3xxx, imx6
Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
KERNEL_PATCHVER:=$(KERNEL_TESTING_PATCHVER)
endif
-LINUX_VERSION-4.14 = .202
+LINUX_VERSION-4.14 = .206
-LINUX_KERNEL_HASH-4.14.202 = 95c717ab5b0bdd2333e829f0507385fbe3424ceee810727f3a8551a0c74be328
+LINUX_KERNEL_HASH-4.14.206 = 1c233efaa5063983293a02d4692acc9ced9c03e18857364855d4f612347086ac
remove_uri_prefix=$(subst git://,,$(subst http://,,$(subst https://,,$(1))))
sanitize_uri=$(call qstrip,$(subst @,_,$(subst :,_,$(subst .,_,$(subst -,_,$(subst /,_,$(1)))))))
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
-@@ -1463,7 +1463,7 @@ config SERIAL_XILINX_PS_UART_CONSOLE
+@@ -1464,7 +1464,7 @@ config SERIAL_XILINX_PS_UART_CONSOLE
config SERIAL_AR933X
tristate "AR933X serial port support"
--- a/drivers/clk/bcm/clk-bcm2835.c
+++ b/drivers/clk/bcm/clk-bcm2835.c
-@@ -2220,8 +2220,15 @@ static int bcm2835_clk_probe(struct plat
+@@ -2222,8 +2222,15 @@ static int bcm2835_clk_probe(struct plat
if (ret)
return ret;
}
static const struct of_device_id bcm2835_clk_of_match[] = {
-@@ -2238,7 +2245,11 @@ static struct platform_driver bcm2835_cl
+@@ -2240,7 +2247,11 @@ static struct platform_driver bcm2835_cl
.probe = bcm2835_clk_probe,
};
--- a/drivers/clk/bcm/clk-bcm2835.c
+++ b/drivers/clk/bcm/clk-bcm2835.c
-@@ -1397,6 +1397,11 @@ bcm2835_register_pll_divider(struct bcm2
+@@ -1399,6 +1399,11 @@ bcm2835_register_pll_divider(struct bcm2
divider->div.hw.init = &init;
divider->div.table = NULL;
pll = kzalloc(sizeof(*pll), GFP_KERNEL);
if (!pll)
return NULL;
-@@ -1398,8 +1403,10 @@ bcm2835_register_pll_divider(struct bcm2
+@@ -1400,8 +1405,10 @@ bcm2835_register_pll_divider(struct bcm2
divider->div.table = NULL;
if (!(cprman_read(cprman, data->cm_reg) & data->hold_mask)) {
}
divider->cprman = cprman;
-@@ -2152,6 +2159,8 @@ static const struct bcm2835_clk_desc clk
+@@ -2154,6 +2161,8 @@ static const struct bcm2835_clk_desc clk
.ctl_reg = CM_PERIICTL),
};
/*
* Permanently take a reference on the parent of the SDRAM clock.
*
-@@ -2171,6 +2180,19 @@ static int bcm2835_mark_sdc_parent_criti
+@@ -2173,6 +2182,19 @@ static int bcm2835_mark_sdc_parent_criti
return clk_prepare_enable(parent);
}
static int bcm2835_clk_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
-@@ -2180,6 +2202,7 @@ static int bcm2835_clk_probe(struct plat
+@@ -2182,6 +2204,7 @@ static int bcm2835_clk_probe(struct plat
const struct bcm2835_clk_desc *desc;
const size_t asize = ARRAY_SIZE(clk_desc_array);
size_t i;
int ret;
cprman = devm_kzalloc(dev, sizeof(*cprman) +
-@@ -2195,6 +2218,13 @@ static int bcm2835_clk_probe(struct plat
+@@ -2197,6 +2220,13 @@ static int bcm2835_clk_probe(struct plat
if (IS_ERR(cprman->regs))
return PTR_ERR(cprman->regs);
.set_rate = bcm2835_clock_set_rate,
.determine_rate = bcm2835_clock_determine_rate,
.set_parent = bcm2835_clock_set_parent,
-@@ -2201,6 +2229,7 @@ static int bcm2835_clk_probe(struct plat
+@@ -2203,6 +2231,7 @@ static int bcm2835_clk_probe(struct plat
struct resource *res;
const struct bcm2835_clk_desc *desc;
const size_t asize = ARRAY_SIZE(clk_desc_array);
size_t i;
u32 clk_id;
int ret;
-@@ -2218,6 +2247,14 @@ static int bcm2835_clk_probe(struct plat
+@@ -2220,6 +2249,14 @@ static int bcm2835_clk_probe(struct plat
if (IS_ERR(cprman->regs))
return PTR_ERR(cprman->regs);
--- a/drivers/clk/bcm/clk-bcm2835.c
+++ b/drivers/clk/bcm/clk-bcm2835.c
-@@ -1490,6 +1490,15 @@ static struct clk_hw *bcm2835_register_c
+@@ -1492,6 +1492,15 @@ static struct clk_hw *bcm2835_register_c
init.flags = data->flags | CLK_IGNORE_UNUSED;
/*
--- a/drivers/gpu/drm/vc4/vc4_drv.c
+++ b/drivers/gpu/drm/vc4/vc4_drv.c
-@@ -317,6 +317,7 @@ static struct platform_driver *const com
+@@ -318,6 +318,7 @@ static struct platform_driver *const com
&vc4_dsi_driver,
&vc4_hvs_driver,
&vc4_crtc_driver,
const struct of_device_id dwc2_of_match_table[] = {
{ .compatible = "brcm,bcm2835-usb", .data = dwc2_set_bcm_params },
{ .compatible = "hisilicon,hi6220-usb", .data = dwc2_set_his_params },
-@@ -710,17 +740,23 @@ int dwc2_get_hwparams(struct dwc2_hsotg
+@@ -710,18 +740,23 @@ int dwc2_get_hwparams(struct dwc2_hsotg
int dwc2_init_params(struct dwc2_hsotg *hsotg)
{
+ /*
const struct of_device_id *match;
- void (*set_params)(void *data);
+ void (*set_params)(struct dwc2_hsotg *data);
+ */
dwc2_set_default_params(hsotg);
set_params(hsotg);
}
+ */
-+
-+ dwc2_set_cns3xxx_params(hsotg);
++ dwc2_set_cns3xxx_params(hsotg);
dwc2_check_params(hsotg);
+ return 0;
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
-@@ -2001,7 +2001,8 @@ static const struct usb_device_id option
+@@ -2011,7 +2011,8 @@ static const struct usb_device_id option
{ USB_DEVICE_INTERFACE_CLASS(0x2001, 0x7d01, 0xff) }, /* D-Link DWM-156 (variant) */
{ USB_DEVICE_INTERFACE_CLASS(0x2001, 0x7d02, 0xff) },
{ USB_DEVICE_INTERFACE_CLASS(0x2001, 0x7d03, 0xff) },
--- a/init/Kconfig
+++ b/init/Kconfig
-@@ -1903,6 +1903,13 @@ config TRIM_UNUSED_KSYMS
+@@ -1904,6 +1904,13 @@ config TRIM_UNUSED_KSYMS
If unsure, or if you need to build out-of-tree modules, say N.
+#endif
--- a/init/Kconfig
+++ b/init/Kconfig
-@@ -1009,6 +1009,10 @@ config RELAY
+@@ -1010,6 +1010,10 @@ config RELAY
If unsure, say N.
--- a/init/Kconfig
+++ b/init/Kconfig
-@@ -1081,6 +1081,17 @@ config SYSCTL_ARCH_UNALIGN_ALLOW
+@@ -1082,6 +1082,17 @@ config SYSCTL_ARCH_UNALIGN_ALLOW
the unaligned access emulation.
see arch/parisc/kernel/unaligned.c for reference
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
-@@ -199,6 +199,7 @@ config PPC
+@@ -200,6 +200,7 @@ config PPC
select HAVE_IOREMAP_PROT
select HAVE_IRQ_EXIT_ON_IRQ_STACK
select HAVE_KERNEL_GZIP
--- a/init/Kconfig
+++ b/init/Kconfig
-@@ -1427,6 +1427,15 @@ config EMBEDDED
+@@ -1428,6 +1428,15 @@ config EMBEDDED
an embedded system so certain expert options are available
for configuration.
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
-@@ -1934,6 +1934,17 @@ config ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEN
+@@ -1936,6 +1936,17 @@ config ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEN
The command-line arguments provided by the boot loader will be
appended to the the device tree bootargs property.
+}
--- a/drivers/staging/fsl-mc/bus/mc-io.c
+++ /dev/null
-@@ -1,292 +0,0 @@
+@@ -1,297 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
-/*
- * Copyright 2013-2016 Freescale Semiconductor Inc.
- */
-void fsl_destroy_mc_io(struct fsl_mc_io *mc_io)
-{
-- struct fsl_mc_device *dpmcp_dev = mc_io->dpmcp_dev;
+- struct fsl_mc_device *dpmcp_dev;
+-
+- if (!mc_io)
+- return;
+-
+- dpmcp_dev = mc_io->dpmcp_dev;
-
- if (dpmcp_dev)
- fsl_mc_io_unset_dpmcp(mc_io);
dwc->lpm_nyet_threshold = lpm_nyet_threshold;
dwc->tx_de_emphasis = tx_de_emphasis;
-@@ -1376,12 +1541,14 @@ static int dwc3_resume_common(struct dwc
+@@ -1387,12 +1552,14 @@ static int dwc3_resume_common(struct dwc
switch (dwc->dr_mode) {
case USB_DR_MODE_PERIPHERAL:
struct list_head cached_itd_list;
--- a/drivers/usb/host/fsl-mph-dr-of.c
+++ b/drivers/usb/host/fsl-mph-dr-of.c
-@@ -229,6 +229,17 @@ static int fsl_usb2_mph_dr_of_probe(stru
+@@ -232,6 +232,17 @@ static int fsl_usb2_mph_dr_of_probe(stru
pdata->has_fsl_erratum_a005697 =
of_property_read_bool(np, "fsl,usb_erratum-a005697");
return 0;
-@@ -1069,10 +1086,10 @@ static void flexcan_chip_stop(struct net
- flexcan_chip_disable(priv);
+@@ -1074,10 +1091,10 @@ static int __flexcan_chip_stop(struct ne
+ goto out_chip_unfreeze;
/* Disable all interrupts */
- flexcan_write(0, ®s->imask2);
flexcan_transceiver_disable(priv);
priv->can.state = CAN_STATE_STOPPED;
-@@ -1187,26 +1204,26 @@ static int register_flexcandev(struct ne
+@@ -1209,26 +1226,26 @@ static int register_flexcandev(struct ne
err = flexcan_chip_disable(priv);
if (err)
goto out_disable_per;
if (!(reg & FLEXCAN_MCR_FEN)) {
netdev_err(dev, "Could not enable RX FIFO, unsupported core\n");
err = -ENODEV;
-@@ -1234,8 +1251,12 @@ static void unregister_flexcandev(struct
+@@ -1256,8 +1273,12 @@ static void unregister_flexcandev(struct
static const struct of_device_id flexcan_of_match[] = {
{ .compatible = "fsl,imx6q-flexcan", .data = &fsl_imx6q_devtype_data, },
{ .compatible = "fsl,imx28-flexcan", .data = &fsl_imx28_devtype_data, },
{ /* sentinel */ },
};
MODULE_DEVICE_TABLE(of, flexcan_of_match);
-@@ -1315,6 +1336,21 @@ static int flexcan_probe(struct platform
+@@ -1337,6 +1358,21 @@ static int flexcan_probe(struct platform
dev->flags |= IFF_ECHO;
priv = netdev_priv(dev);
reg = <6>;
label = "cpu";
ethernet = <&gmac0>;
-@@ -187,8 +227,6 @@
+@@ -188,8 +228,6 @@
};
};
};
--- a/arch/arm64/Kconfig.platforms
+++ b/arch/arm64/Kconfig.platforms
-@@ -91,12 +91,13 @@ config ARCH_HISI
+@@ -92,12 +92,13 @@ config ARCH_HISI
This enables support for Hisilicon ARMv8 SoC family
config ARCH_MEDIATEK
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
-@@ -837,6 +837,14 @@ config CMDLINE_FORCE
+@@ -838,6 +838,14 @@ config CMDLINE_FORCE
This is useful if you cannot or don't want to change the
command-line options your boot loader passes to the kernel.
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
-@@ -1934,6 +1934,17 @@ config ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEN
+@@ -1936,6 +1936,17 @@ config ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEN
The command-line arguments provided by the boot loader will be
appended to the the device tree bootargs property.
--- a/drivers/net/phy/sfp.c
+++ b/drivers/net/phy/sfp.c
-@@ -1168,6 +1168,7 @@ static int sfp_remove(struct platform_de
+@@ -1169,6 +1169,7 @@ static int sfp_remove(struct platform_de
static const struct of_device_id sfp_of_match[] = {
{ .compatible = "sff,sfp", },
--- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts
+++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts
-@@ -96,6 +96,33 @@
+@@ -100,6 +100,33 @@
status = "okay";
};
--- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts
+++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts
-@@ -93,9 +93,31 @@
+@@ -97,9 +97,31 @@
cd-gpios = <&gpionb 3 GPIO_ACTIVE_LOW>;
marvell,pad-type = "sd";
vqmmc-supply = <&vcc_sd_reg1>;
--- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts
+++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts
-@@ -123,25 +123,9 @@
+@@ -127,25 +127,9 @@
flash@0 {
reg = <0>;
--- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts
+++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts
-@@ -153,7 +153,7 @@
+@@ -157,7 +157,7 @@
dsa,member = <0 0>;
--- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts
+++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts
-@@ -79,6 +79,8 @@
+@@ -83,6 +83,8 @@
/* J9 */
&pcie0 {
status = "okay";
--- a/drivers/staging/octeon/ethernet.c
+++ b/drivers/staging/octeon/ethernet.c
-@@ -673,6 +673,7 @@ static int cvm_oct_probe(struct platform
+@@ -674,6 +674,7 @@ static int cvm_oct_probe(struct platform
int interface;
int fau = FAU_NUM_PACKET_BUFFERS_TO_FREE;
int qos;
struct device_node *pip;
int mtu_overhead = ETH_HLEN + ETH_FCS_LEN;
-@@ -796,13 +797,19 @@ static int cvm_oct_probe(struct platform
+@@ -797,13 +798,19 @@ static int cvm_oct_probe(struct platform
}
num_interfaces = cvmx_helper_get_number_of_interfaces();
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
-@@ -1934,6 +1934,17 @@ config ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEN
+@@ -1936,6 +1936,17 @@ config ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEN
The command-line arguments provided by the boot loader will be
appended to the the device tree bootargs property.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
-@@ -1150,5 +1151,6 @@ module_platform_driver(korina_driver);
+@@ -1151,5 +1152,6 @@ module_platform_driver(korina_driver);
MODULE_AUTHOR("Philip Rischel <rischelp@idt.com>");
MODULE_AUTHOR("Felix Fietkau <nbd@openwrt.org>");
MODULE_AUTHOR("Florian Fainelli <florian@openwrt.org>");
projects / openwrt / staging / hauke.git / commitdiff