--- /dev/null
+/*
+ * MPC8641 HPCN Device Tree Source
+ *
+ * Copyright 2008-2009 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+
+/ {
+ model = "MPC8641HPCN";
+ compatible = "fsl,mpc8641hpcn";
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ aliases {
+ ethernet0 = &enet0;
+ ethernet1 = &enet1;
+ ethernet2 = &enet2;
+ ethernet3 = &enet3;
+ serial0 = &serial0;
+ serial1 = &serial1;
+ pci0 = &pci0;
+ pci1 = &pci1;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,8641@0 {
+ device_type = "cpu";
+ reg = <0>;
+ d-cache-line-size = <32>; // 32 bytes
+ i-cache-line-size = <32>; // 32 bytes
+ d-cache-size = <32768>; // L1, 32K
+ i-cache-size = <32768>; // L1, 32K
+ timebase-frequency = <0>; // 33 MHz, from uboot
+ bus-frequency = <0>; // From uboot
+ clock-frequency = <0>; // From uboot
+ };
+ PowerPC,8641@1 {
+ device_type = "cpu";
+ reg = <1>;
+ d-cache-line-size = <32>; // 32 bytes
+ i-cache-line-size = <32>; // 32 bytes
+ d-cache-size = <32768>; // L1, 32K
+ i-cache-size = <32768>; // L1, 32K
+ timebase-frequency = <0>; // 33 MHz, from uboot
+ bus-frequency = <0>; // From uboot
+ clock-frequency = <0>; // From uboot
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x0 0x00000000 0x0 0x40000000>; // 1G at 0x0
+ };
+
+ localbus@fffe05000 {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8641-localbus", "simple-bus";
+ reg = <0x0f 0xffe05000 0x0 0x1000>;
+ interrupts = <19 2>;
+ interrupt-parent = <&mpic>;
+
+ ranges = <0 0 0xf 0xef800000 0x00800000
+ 2 0 0xf 0xffdf8000 0x00008000
+ 3 0 0xf 0xffdf0000 0x00008000>;
+
+ flash@0,0 {
+ compatible = "cfi-flash";
+ reg = <0 0 0x00800000>;
+ bank-width = <2>;
+ device-width = <2>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ partition@0 {
+ label = "kernel";
+ reg = <0x00000000 0x00300000>;
+ };
+ partition@300000 {
+ label = "firmware b";
+ reg = <0x00300000 0x00100000>;
+ read-only;
+ };
+ partition@400000 {
+ label = "fs";
+ reg = <0x00400000 0x00300000>;
+ };
+ partition@700000 {
+ label = "firmware a";
+ reg = <0x00700000 0x00100000>;
+ read-only;
+ };
+ };
+ };
+
+ soc8641@fffe00000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "soc";
+ compatible = "simple-bus";
+ ranges = <0x00000000 0x0f 0xffe00000 0x00100000>;
+ reg = <0x0f 0xffe00000 0x0 0x00001000>; // CCSRBAR
+ bus-frequency = <0>;
+
+ i2c@3000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <0>;
+ compatible = "fsl-i2c";
+ reg = <0x3000 0x100>;
+ interrupts = <43 2>;
+ interrupt-parent = <&mpic>;
+ dfsrr;
+ };
+
+ i2c@3100 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <1>;
+ compatible = "fsl-i2c";
+ reg = <0x3100 0x100>;
+ interrupts = <43 2>;
+ interrupt-parent = <&mpic>;
+ dfsrr;
+ };
+
+ dma@21300 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8641-dma", "fsl,eloplus-dma";
+ reg = <0x21300 0x4>;
+ ranges = <0x0 0x21100 0x200>;
+ cell-index = <0>;
+ dma-channel@0 {
+ compatible = "fsl,mpc8641-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x0 0x80>;
+ cell-index = <0>;
+ interrupt-parent = <&mpic>;
+ interrupts = <20 2>;
+ };
+ dma-channel@80 {
+ compatible = "fsl,mpc8641-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x80 0x80>;
+ cell-index = <1>;
+ interrupt-parent = <&mpic>;
+ interrupts = <21 2>;
+ };
+ dma-channel@100 {
+ compatible = "fsl,mpc8641-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x100 0x80>;
+ cell-index = <2>;
+ interrupt-parent = <&mpic>;
+ interrupts = <22 2>;
+ };
+ dma-channel@180 {
+ compatible = "fsl,mpc8641-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x180 0x80>;
+ cell-index = <3>;
+ interrupt-parent = <&mpic>;
+ interrupts = <23 2>;
+ };
+ };
+
+ enet0: ethernet@24000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ cell-index = <0>;
+ device_type = "network";
+ model = "TSEC";
+ compatible = "gianfar";
+ reg = <0x24000 0x1000>;
+ ranges = <0x0 0x24000 0x1000>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupts = <29 2 30 2 34 2>;
+ interrupt-parent = <&mpic>;
+ tbi-handle = <&tbi0>;
+ phy-handle = <&phy0>;
+ phy-connection-type = "rgmii-id";
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-mdio";
+ reg = <0x520 0x20>;
+
+ phy0: ethernet-phy@0 {
+ interrupt-parent = <&mpic>;
+ interrupts = <10 1>;
+ reg = <0>;
+ device_type = "ethernet-phy";
+ };
+ phy1: ethernet-phy@1 {
+ interrupt-parent = <&mpic>;
+ interrupts = <10 1>;
+ reg = <1>;
+ device_type = "ethernet-phy";
+ };
+ phy2: ethernet-phy@2 {
+ interrupt-parent = <&mpic>;
+ interrupts = <10 1>;
+ reg = <2>;
+ device_type = "ethernet-phy";
+ };
+ phy3: ethernet-phy@3 {
+ interrupt-parent = <&mpic>;
+ interrupts = <10 1>;
+ reg = <3>;
+ device_type = "ethernet-phy";
+ };
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+ };
+
+ enet1: ethernet@25000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ cell-index = <1>;
+ device_type = "network";
+ model = "TSEC";
+ compatible = "gianfar";
+ reg = <0x25000 0x1000>;
+ ranges = <0x0 0x25000 0x1000>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupts = <35 2 36 2 40 2>;
+ interrupt-parent = <&mpic>;
+ tbi-handle = <&tbi1>;
+ phy-handle = <&phy1>;
+ phy-connection-type = "rgmii-id";
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x520 0x20>;
+
+ tbi1: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+ };
+
+ enet2: ethernet@26000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ cell-index = <2>;
+ device_type = "network";
+ model = "TSEC";
+ compatible = "gianfar";
+ reg = <0x26000 0x1000>;
+ ranges = <0x0 0x26000 0x1000>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupts = <31 2 32 2 33 2>;
+ interrupt-parent = <&mpic>;
+ tbi-handle = <&tbi2>;
+ phy-handle = <&phy2>;
+ phy-connection-type = "rgmii-id";
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x520 0x20>;
+
+ tbi2: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+ };
+
+ enet3: ethernet@27000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ cell-index = <3>;
+ device_type = "network";
+ model = "TSEC";
+ compatible = "gianfar";
+ reg = <0x27000 0x1000>;
+ ranges = <0x0 0x27000 0x1000>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupts = <37 2 38 2 39 2>;
+ interrupt-parent = <&mpic>;
+ tbi-handle = <&tbi3>;
+ phy-handle = <&phy3>;
+ phy-connection-type = "rgmii-id";
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x520 0x20>;
+
+ tbi3: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+ };
+
+ serial0: serial@4500 {
+ cell-index = <0>;
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0x4500 0x100>;
+ clock-frequency = <0>;
+ interrupts = <42 2>;
+ interrupt-parent = <&mpic>;
+ };
+
+ serial1: serial@4600 {
+ cell-index = <1>;
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0x4600 0x100>;
+ clock-frequency = <0>;
+ interrupts = <28 2>;
+ interrupt-parent = <&mpic>;
+ };
+
+ mpic: pic@40000 {
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <2>;
+ reg = <0x40000 0x40000>;
+ compatible = "chrp,open-pic";
+ device_type = "open-pic";
+ };
+
+ global-utilities@e0000 {
+ compatible = "fsl,mpc8641-guts";
+ reg = <0xe0000 0x1000>;
+ fsl,has-rstcr;
+ };
+ };
+
+ pci0: pcie@fffe08000 {
+ cell-index = <0>;
+ compatible = "fsl,mpc8641-pcie";
+ device_type = "pci";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = <0x0f 0xffe08000 0x0 0x1000>;
+ bus-range = <0x0 0xff>;
+ ranges = <0x02000000 0x0 0xc0000000 0x0c 0x00000000 0x0 0x20000000
+ 0x01000000 0x0 0x00000000 0x0f 0xffc00000 0x0 0x00010000>;
+ clock-frequency = <33333333>;
+ interrupt-parent = <&mpic>;
+ interrupts = <24 2>;
+ interrupt-map-mask = <0xff00 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x11 func 0 - PCI slot 1 */
+ 0x8800 0 0 1 &mpic 2 1
+ 0x8800 0 0 2 &mpic 3 1
+ 0x8800 0 0 3 &mpic 4 1
+ 0x8800 0 0 4 &mpic 1 1
+
+ /* IDSEL 0x11 func 1 - PCI slot 1 */
+ 0x8900 0 0 1 &mpic 2 1
+ 0x8900 0 0 2 &mpic 3 1
+ 0x8900 0 0 3 &mpic 4 1
+ 0x8900 0 0 4 &mpic 1 1
+
+ /* IDSEL 0x11 func 2 - PCI slot 1 */
+ 0x8a00 0 0 1 &mpic 2 1
+ 0x8a00 0 0 2 &mpic 3 1
+ 0x8a00 0 0 3 &mpic 4 1
+ 0x8a00 0 0 4 &mpic 1 1
+
+ /* IDSEL 0x11 func 3 - PCI slot 1 */
+ 0x8b00 0 0 1 &mpic 2 1
+ 0x8b00 0 0 2 &mpic 3 1
+ 0x8b00 0 0 3 &mpic 4 1
+ 0x8b00 0 0 4 &mpic 1 1
+
+ /* IDSEL 0x11 func 4 - PCI slot 1 */
+ 0x8c00 0 0 1 &mpic 2 1
+ 0x8c00 0 0 2 &mpic 3 1
+ 0x8c00 0 0 3 &mpic 4 1
+ 0x8c00 0 0 4 &mpic 1 1
+
+ /* IDSEL 0x11 func 5 - PCI slot 1 */
+ 0x8d00 0 0 1 &mpic 2 1
+ 0x8d00 0 0 2 &mpic 3 1
+ 0x8d00 0 0 3 &mpic 4 1
+ 0x8d00 0 0 4 &mpic 1 1
+
+ /* IDSEL 0x11 func 6 - PCI slot 1 */
+ 0x8e00 0 0 1 &mpic 2 1
+ 0x8e00 0 0 2 &mpic 3 1
+ 0x8e00 0 0 3 &mpic 4 1
+ 0x8e00 0 0 4 &mpic 1 1
+
+ /* IDSEL 0x11 func 7 - PCI slot 1 */
+ 0x8f00 0 0 1 &mpic 2 1
+ 0x8f00 0 0 2 &mpic 3 1
+ 0x8f00 0 0 3 &mpic 4 1
+ 0x8f00 0 0 4 &mpic 1 1
+
+ /* IDSEL 0x12 func 0 - PCI slot 2 */
+ 0x9000 0 0 1 &mpic 3 1
+ 0x9000 0 0 2 &mpic 4 1
+ 0x9000 0 0 3 &mpic 1 1
+ 0x9000 0 0 4 &mpic 2 1
+
+ /* IDSEL 0x12 func 1 - PCI slot 2 */
+ 0x9100 0 0 1 &mpic 3 1
+ 0x9100 0 0 2 &mpic 4 1
+ 0x9100 0 0 3 &mpic 1 1
+ 0x9100 0 0 4 &mpic 2 1
+
+ /* IDSEL 0x12 func 2 - PCI slot 2 */
+ 0x9200 0 0 1 &mpic 3 1
+ 0x9200 0 0 2 &mpic 4 1
+ 0x9200 0 0 3 &mpic 1 1
+ 0x9200 0 0 4 &mpic 2 1
+
+ /* IDSEL 0x12 func 3 - PCI slot 2 */
+ 0x9300 0 0 1 &mpic 3 1
+ 0x9300 0 0 2 &mpic 4 1
+ 0x9300 0 0 3 &mpic 1 1
+ 0x9300 0 0 4 &mpic 2 1
+
+ /* IDSEL 0x12 func 4 - PCI slot 2 */
+ 0x9400 0 0 1 &mpic 3 1
+ 0x9400 0 0 2 &mpic 4 1
+ 0x9400 0 0 3 &mpic 1 1
+ 0x9400 0 0 4 &mpic 2 1
+
+ /* IDSEL 0x12 func 5 - PCI slot 2 */
+ 0x9500 0 0 1 &mpic 3 1
+ 0x9500 0 0 2 &mpic 4 1
+ 0x9500 0 0 3 &mpic 1 1
+ 0x9500 0 0 4 &mpic 2 1
+
+ /* IDSEL 0x12 func 6 - PCI slot 2 */
+ 0x9600 0 0 1 &mpic 3 1
+ 0x9600 0 0 2 &mpic 4 1
+ 0x9600 0 0 3 &mpic 1 1
+ 0x9600 0 0 4 &mpic 2 1
+
+ /* IDSEL 0x12 func 7 - PCI slot 2 */
+ 0x9700 0 0 1 &mpic 3 1
+ 0x9700 0 0 2 &mpic 4 1
+ 0x9700 0 0 3 &mpic 1 1
+ 0x9700 0 0 4 &mpic 2 1
+
+ // IDSEL 0x1c USB
+ 0xe000 0 0 1 &i8259 12 2
+ 0xe100 0 0 2 &i8259 9 2
+ 0xe200 0 0 3 &i8259 10 2
+ 0xe300 0 0 4 &i8259 11 2
+
+ // IDSEL 0x1d Audio
+ 0xe800 0 0 1 &i8259 6 2
+
+ // IDSEL 0x1e Legacy
+ 0xf000 0 0 1 &i8259 7 2
+ 0xf100 0 0 1 &i8259 7 2
+
+ // IDSEL 0x1f IDE/SATA
+ 0xf800 0 0 1 &i8259 14 2
+ 0xf900 0 0 1 &i8259 5 2
+ >;
+
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ ranges = <0x02000000 0x0 0xc0000000
+ 0x02000000 0x0 0xc0000000
+ 0x0 0x20000000
+
+ 0x01000000 0x0 0x00000000
+ 0x01000000 0x0 0x00000000
+ 0x0 0x00010000>;
+ uli1575@0 {
+ reg = <0 0 0 0 0>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ ranges = <0x02000000 0x0 0xc0000000
+ 0x02000000 0x0 0xc0000000
+ 0x0 0x20000000
+ 0x01000000 0x0 0x00000000
+ 0x01000000 0x0 0x00000000
+ 0x0 0x00010000>;
+ isa@1e {
+ device_type = "isa";
+ #interrupt-cells = <2>;
+ #size-cells = <1>;
+ #address-cells = <2>;
+ reg = <0xf000 0 0 0 0>;
+ ranges = <1 0 0x01000000 0 0
+ 0x00001000>;
+ interrupt-parent = <&i8259>;
+
+ i8259: interrupt-controller@20 {
+ reg = <1 0x20 2
+ 1 0xa0 2
+ 1 0x4d0 2>;
+ interrupt-controller;
+ device_type = "interrupt-controller";
+ #address-cells = <0>;
+ #interrupt-cells = <2>;
+ compatible = "chrp,iic";
+ interrupts = <9 2>;
+ interrupt-parent = <&mpic>;
+ };
+
+ i8042@60 {
+ #size-cells = <0>;
+ #address-cells = <1>;
+ reg = <1 0x60 1 1 0x64 1>;
+ interrupts = <1 3 12 3>;
+ interrupt-parent =
+ <&i8259>;
+
+ keyboard@0 {
+ reg = <0>;
+ compatible = "pnpPNP,303";
+ };
+
+ mouse@1 {
+ reg = <1>;
+ compatible = "pnpPNP,f03";
+ };
+ };
+
+ rtc@70 {
+ compatible =
+ "pnpPNP,b00";
+ reg = <1 0x70 2>;
+ };
+
+ gpio@400 {
+ reg = <1 0x400 0x80>;
+ };
+ };
+ };
+ };
+
+ };
+
+ pci1: pcie@fffe09000 {
+ cell-index = <1>;
+ compatible = "fsl,mpc8641-pcie";
+ device_type = "pci";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = <0x0f 0xffe09000 0x0 0x1000>;
+ bus-range = <0x0 0xff>;
+ ranges = <0x02000000 0x0 0xc0000000 0x0c 0x20000000 0x0 0x20000000
+ 0x01000000 0x0 0x00000000 0x0f 0xffc10000 0x0 0x00010000>;
+ clock-frequency = <33333333>;
+ interrupt-parent = <&mpic>;
+ interrupts = <25 2>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0x0000 0 0 1 &mpic 4 1
+ 0x0000 0 0 2 &mpic 5 1
+ 0x0000 0 0 3 &mpic 6 1
+ 0x0000 0 0 4 &mpic 7 1
+ >;
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ ranges = <0x02000000 0x0 0xc0000000
+ 0x02000000 0x0 0xc0000000
+ 0x0 0x20000000
+
+ 0x01000000 0x0 0x00000000
+ 0x01000000 0x0 0x00000000
+ 0x0 0x00010000>;
+ };
+ };
+};
projects / openwrt / staging / blogic.git / commitdiff