{ 1, 0, 1 }, /* 1000BT */
};
-static inline int __phy_read(struct mii_phy* phy, int id, int reg)
+static inline int __sungem_phy_read(struct mii_phy* phy, int id, int reg)
{
return phy->mdio_read(phy->dev, id, reg);
}
-static inline void __phy_write(struct mii_phy* phy, int id, int reg, int val)
+static inline void __sungem_phy_write(struct mii_phy* phy, int id, int reg, int val)
{
phy->mdio_write(phy->dev, id, reg, val);
}
-static inline int phy_read(struct mii_phy* phy, int reg)
+static inline int sungem_phy_read(struct mii_phy* phy, int reg)
{
return phy->mdio_read(phy->dev, phy->mii_id, reg);
}
-static inline void phy_write(struct mii_phy* phy, int reg, int val)
+static inline void sungem_phy_write(struct mii_phy* phy, int reg, int val)
{
phy->mdio_write(phy->dev, phy->mii_id, reg, val);
}
u16 val;
int limit = 10000;
- val = __phy_read(phy, phy_id, MII_BMCR);
+ val = __sungem_phy_read(phy, phy_id, MII_BMCR);
val &= ~(BMCR_ISOLATE | BMCR_PDOWN);
val |= BMCR_RESET;
- __phy_write(phy, phy_id, MII_BMCR, val);
+ __sungem_phy_write(phy, phy_id, MII_BMCR, val);
udelay(100);
while (--limit) {
- val = __phy_read(phy, phy_id, MII_BMCR);
+ val = __sungem_phy_read(phy, phy_id, MII_BMCR);
if ((val & BMCR_RESET) == 0)
break;
udelay(10);
}
if ((val & BMCR_ISOLATE) && limit > 0)
- __phy_write(phy, phy_id, MII_BMCR, val & ~BMCR_ISOLATE);
+ __sungem_phy_write(phy, phy_id, MII_BMCR, val & ~BMCR_ISOLATE);
return limit <= 0;
}
{
u16 data;
- data = phy_read(phy, MII_BCM5201_MULTIPHY);
+ data = sungem_phy_read(phy, MII_BCM5201_MULTIPHY);
data &= ~MII_BCM5201_MULTIPHY_SUPERISOLATE;
- phy_write(phy, MII_BCM5201_MULTIPHY, data);
+ sungem_phy_write(phy, MII_BCM5201_MULTIPHY, data);
- phy_write(phy, MII_BCM5201_INTERRUPT, 0);
+ sungem_phy_write(phy, MII_BCM5201_INTERRUPT, 0);
return 0;
}
static int bcm5201_suspend(struct mii_phy* phy)
{
- phy_write(phy, MII_BCM5201_INTERRUPT, 0);
- phy_write(phy, MII_BCM5201_MULTIPHY, MII_BCM5201_MULTIPHY_SUPERISOLATE);
+ sungem_phy_write(phy, MII_BCM5201_INTERRUPT, 0);
+ sungem_phy_write(phy, MII_BCM5201_MULTIPHY, MII_BCM5201_MULTIPHY_SUPERISOLATE);
return 0;
}
{
u16 data;
- data = phy_read(phy, MII_BCM5221_TEST);
- phy_write(phy, MII_BCM5221_TEST,
+ data = sungem_phy_read(phy, MII_BCM5221_TEST);
+ sungem_phy_write(phy, MII_BCM5221_TEST,
data | MII_BCM5221_TEST_ENABLE_SHADOWS);
- data = phy_read(phy, MII_BCM5221_SHDOW_AUX_STAT2);
- phy_write(phy, MII_BCM5221_SHDOW_AUX_STAT2,
+ data = sungem_phy_read(phy, MII_BCM5221_SHDOW_AUX_STAT2);
+ sungem_phy_write(phy, MII_BCM5221_SHDOW_AUX_STAT2,
data | MII_BCM5221_SHDOW_AUX_STAT2_APD);
- data = phy_read(phy, MII_BCM5221_SHDOW_AUX_MODE4);
- phy_write(phy, MII_BCM5221_SHDOW_AUX_MODE4,
+ data = sungem_phy_read(phy, MII_BCM5221_SHDOW_AUX_MODE4);
+ sungem_phy_write(phy, MII_BCM5221_SHDOW_AUX_MODE4,
data | MII_BCM5221_SHDOW_AUX_MODE4_CLKLOPWR);
- data = phy_read(phy, MII_BCM5221_TEST);
- phy_write(phy, MII_BCM5221_TEST,
+ data = sungem_phy_read(phy, MII_BCM5221_TEST);
+ sungem_phy_write(phy, MII_BCM5221_TEST,
data & ~MII_BCM5221_TEST_ENABLE_SHADOWS);
return 0;
{
u16 data;
- data = phy_read(phy, MII_BCM5221_TEST);
- phy_write(phy, MII_BCM5221_TEST,
+ data = sungem_phy_read(phy, MII_BCM5221_TEST);
+ sungem_phy_write(phy, MII_BCM5221_TEST,
data | MII_BCM5221_TEST_ENABLE_SHADOWS);
- data = phy_read(phy, MII_BCM5221_SHDOW_AUX_MODE4);
- phy_write(phy, MII_BCM5221_SHDOW_AUX_MODE4,
+ data = sungem_phy_read(phy, MII_BCM5221_SHDOW_AUX_MODE4);
+ sungem_phy_write(phy, MII_BCM5221_SHDOW_AUX_MODE4,
data | MII_BCM5221_SHDOW_AUX_MODE4_IDDQMODE);
return 0;
{
u16 data;
- data = phy_read(phy, MII_BCM5221_TEST);
- phy_write(phy, MII_BCM5221_TEST,
+ data = sungem_phy_read(phy, MII_BCM5221_TEST);
+ sungem_phy_write(phy, MII_BCM5221_TEST,
data | MII_BCM5221_TEST_ENABLE_SHADOWS);
- data = phy_read(phy, MII_BCM5221_SHDOW_AUX_STAT2);
- phy_write(phy, MII_BCM5221_SHDOW_AUX_STAT2,
+ data = sungem_phy_read(phy, MII_BCM5221_SHDOW_AUX_STAT2);
+ sungem_phy_write(phy, MII_BCM5221_SHDOW_AUX_STAT2,
data | MII_BCM5221_SHDOW_AUX_STAT2_APD);
- data = phy_read(phy, MII_BCM5221_SHDOW_AUX_MODE4);
- phy_write(phy, MII_BCM5221_SHDOW_AUX_MODE4,
+ data = sungem_phy_read(phy, MII_BCM5221_SHDOW_AUX_MODE4);
+ sungem_phy_write(phy, MII_BCM5221_SHDOW_AUX_MODE4,
data & ~MII_BCM5241_SHDOW_AUX_MODE4_STANDBYPWR);
- data = phy_read(phy, MII_BCM5221_TEST);
- phy_write(phy, MII_BCM5221_TEST,
+ data = sungem_phy_read(phy, MII_BCM5221_TEST);
+ sungem_phy_write(phy, MII_BCM5221_TEST,
data & ~MII_BCM5221_TEST_ENABLE_SHADOWS);
return 0;
{
u16 data;
- data = phy_read(phy, MII_BCM5221_TEST);
- phy_write(phy, MII_BCM5221_TEST,
+ data = sungem_phy_read(phy, MII_BCM5221_TEST);
+ sungem_phy_write(phy, MII_BCM5221_TEST,
data | MII_BCM5221_TEST_ENABLE_SHADOWS);
- data = phy_read(phy, MII_BCM5221_SHDOW_AUX_MODE4);
- phy_write(phy, MII_BCM5221_SHDOW_AUX_MODE4,
+ data = sungem_phy_read(phy, MII_BCM5221_SHDOW_AUX_MODE4);
+ sungem_phy_write(phy, MII_BCM5221_SHDOW_AUX_MODE4,
data | MII_BCM5241_SHDOW_AUX_MODE4_STANDBYPWR);
return 0;
u16 data;
/* Configure for gigabit full duplex */
- data = phy_read(phy, MII_BCM5400_AUXCONTROL);
+ data = sungem_phy_read(phy, MII_BCM5400_AUXCONTROL);
data |= MII_BCM5400_AUXCONTROL_PWR10BASET;
- phy_write(phy, MII_BCM5400_AUXCONTROL, data);
+ sungem_phy_write(phy, MII_BCM5400_AUXCONTROL, data);
- data = phy_read(phy, MII_BCM5400_GB_CONTROL);
+ data = sungem_phy_read(phy, MII_BCM5400_GB_CONTROL);
data |= MII_BCM5400_GB_CONTROL_FULLDUPLEXCAP;
- phy_write(phy, MII_BCM5400_GB_CONTROL, data);
+ sungem_phy_write(phy, MII_BCM5400_GB_CONTROL, data);
udelay(100);
/* Reset and configure cascaded 10/100 PHY */
(void)reset_one_mii_phy(phy, 0x1f);
- data = __phy_read(phy, 0x1f, MII_BCM5201_MULTIPHY);
+ data = __sungem_phy_read(phy, 0x1f, MII_BCM5201_MULTIPHY);
data |= MII_BCM5201_MULTIPHY_SERIALMODE;
- __phy_write(phy, 0x1f, MII_BCM5201_MULTIPHY, data);
+ __sungem_phy_write(phy, 0x1f, MII_BCM5201_MULTIPHY, data);
- data = phy_read(phy, MII_BCM5400_AUXCONTROL);
+ data = sungem_phy_read(phy, MII_BCM5400_AUXCONTROL);
data &= ~MII_BCM5400_AUXCONTROL_PWR10BASET;
- phy_write(phy, MII_BCM5400_AUXCONTROL, data);
+ sungem_phy_write(phy, MII_BCM5400_AUXCONTROL, data);
return 0;
}
static int bcm5400_suspend(struct mii_phy* phy)
{
#if 0 /* Commented out in Darwin... someone has those dawn docs ? */
- phy_write(phy, MII_BMCR, BMCR_PDOWN);
+ sungem_phy_write(phy, MII_BMCR, BMCR_PDOWN);
#endif
return 0;
}
u16 data;
int rev;
- rev = phy_read(phy, MII_PHYSID2) & 0x000f;
+ rev = sungem_phy_read(phy, MII_PHYSID2) & 0x000f;
if (rev == 0 || rev == 3) {
/* Some revisions of 5401 appear to need this
* initialisation sequence to disable, according
* Note: This should (and does) match tg3_init_5401phy_dsp
* in the tg3.c driver. -DaveM
*/
- phy_write(phy, 0x18, 0x0c20);
- phy_write(phy, 0x17, 0x0012);
- phy_write(phy, 0x15, 0x1804);
- phy_write(phy, 0x17, 0x0013);
- phy_write(phy, 0x15, 0x1204);
- phy_write(phy, 0x17, 0x8006);
- phy_write(phy, 0x15, 0x0132);
- phy_write(phy, 0x17, 0x8006);
- phy_write(phy, 0x15, 0x0232);
- phy_write(phy, 0x17, 0x201f);
- phy_write(phy, 0x15, 0x0a20);
+ sungem_phy_write(phy, 0x18, 0x0c20);
+ sungem_phy_write(phy, 0x17, 0x0012);
+ sungem_phy_write(phy, 0x15, 0x1804);
+ sungem_phy_write(phy, 0x17, 0x0013);
+ sungem_phy_write(phy, 0x15, 0x1204);
+ sungem_phy_write(phy, 0x17, 0x8006);
+ sungem_phy_write(phy, 0x15, 0x0132);
+ sungem_phy_write(phy, 0x17, 0x8006);
+ sungem_phy_write(phy, 0x15, 0x0232);
+ sungem_phy_write(phy, 0x17, 0x201f);
+ sungem_phy_write(phy, 0x15, 0x0a20);
}
/* Configure for gigabit full duplex */
- data = phy_read(phy, MII_BCM5400_GB_CONTROL);
+ data = sungem_phy_read(phy, MII_BCM5400_GB_CONTROL);
data |= MII_BCM5400_GB_CONTROL_FULLDUPLEXCAP;
- phy_write(phy, MII_BCM5400_GB_CONTROL, data);
+ sungem_phy_write(phy, MII_BCM5400_GB_CONTROL, data);
udelay(10);
/* Reset and configure cascaded 10/100 PHY */
(void)reset_one_mii_phy(phy, 0x1f);
- data = __phy_read(phy, 0x1f, MII_BCM5201_MULTIPHY);
+ data = __sungem_phy_read(phy, 0x1f, MII_BCM5201_MULTIPHY);
data |= MII_BCM5201_MULTIPHY_SERIALMODE;
- __phy_write(phy, 0x1f, MII_BCM5201_MULTIPHY, data);
+ __sungem_phy_write(phy, 0x1f, MII_BCM5201_MULTIPHY, data);
return 0;
}
static int bcm5401_suspend(struct mii_phy* phy)
{
#if 0 /* Commented out in Darwin... someone has those dawn docs ? */
- phy_write(phy, MII_BMCR, BMCR_PDOWN);
+ sungem_phy_write(phy, MII_BMCR, BMCR_PDOWN);
#endif
return 0;
}
/* Here's some more Apple black magic to setup
* some voltage stuffs.
*/
- phy_write(phy, 0x1c, 0x8c23);
- phy_write(phy, 0x1c, 0x8ca3);
- phy_write(phy, 0x1c, 0x8c23);
+ sungem_phy_write(phy, 0x1c, 0x8c23);
+ sungem_phy_write(phy, 0x1c, 0x8ca3);
+ sungem_phy_write(phy, 0x1c, 0x8c23);
/* Here, Apple seems to want to reset it, do
* it as well
*/
- phy_write(phy, MII_BMCR, BMCR_RESET);
- phy_write(phy, MII_BMCR, 0x1340);
+ sungem_phy_write(phy, MII_BMCR, BMCR_RESET);
+ sungem_phy_write(phy, MII_BMCR, 0x1340);
- data = phy_read(phy, MII_BCM5400_GB_CONTROL);
+ data = sungem_phy_read(phy, MII_BCM5400_GB_CONTROL);
data |= MII_BCM5400_GB_CONTROL_FULLDUPLEXCAP;
- phy_write(phy, MII_BCM5400_GB_CONTROL, data);
+ sungem_phy_write(phy, MII_BCM5400_GB_CONTROL, data);
udelay(10);
phy->advertising = advertise;
/* Setup standard advertise */
- adv = phy_read(phy, MII_ADVERTISE);
+ adv = sungem_phy_read(phy, MII_ADVERTISE);
adv &= ~(ADVERTISE_ALL | ADVERTISE_100BASE4);
if (advertise & ADVERTISED_10baseT_Half)
adv |= ADVERTISE_10HALF;
adv |= ADVERTISE_100HALF;
if (advertise & ADVERTISED_100baseT_Full)
adv |= ADVERTISE_100FULL;
- phy_write(phy, MII_ADVERTISE, adv);
+ sungem_phy_write(phy, MII_ADVERTISE, adv);
/* Start/Restart aneg */
- ctl = phy_read(phy, MII_BMCR);
+ ctl = sungem_phy_read(phy, MII_BMCR);
ctl |= (BMCR_ANENABLE | BMCR_ANRESTART);
- phy_write(phy, MII_BMCR, ctl);
+ sungem_phy_write(phy, MII_BMCR, ctl);
return 0;
}
phy->duplex = fd;
phy->pause = 0;
- ctl = phy_read(phy, MII_BMCR);
+ ctl = sungem_phy_read(phy, MII_BMCR);
ctl &= ~(BMCR_FULLDPLX|BMCR_SPEED100|BMCR_ANENABLE);
/* First reset the PHY */
- phy_write(phy, MII_BMCR, ctl | BMCR_RESET);
+ sungem_phy_write(phy, MII_BMCR, ctl | BMCR_RESET);
/* Select speed & duplex */
switch(speed) {
}
if (fd == DUPLEX_FULL)
ctl |= BMCR_FULLDPLX;
- phy_write(phy, MII_BMCR, ctl);
+ sungem_phy_write(phy, MII_BMCR, ctl);
return 0;
}
{
u16 status;
- (void)phy_read(phy, MII_BMSR);
- status = phy_read(phy, MII_BMSR);
+ (void)sungem_phy_read(phy, MII_BMSR);
+ status = sungem_phy_read(phy, MII_BMSR);
if ((status & BMSR_LSTATUS) == 0)
return 0;
if (phy->autoneg && !(status & BMSR_ANEGCOMPLETE))
u16 lpa;
if (phy->autoneg) {
- lpa = phy_read(phy, MII_LPA);
+ lpa = sungem_phy_read(phy, MII_LPA);
if (lpa & (LPA_10FULL | LPA_100FULL))
phy->duplex = DUPLEX_FULL;
static int generic_suspend(struct mii_phy* phy)
{
- phy_write(phy, MII_BMCR, BMCR_PDOWN);
+ sungem_phy_write(phy, MII_BMCR, BMCR_PDOWN);
return 0;
}
u16 data;
unsigned int id;
- id = (phy_read(phy, MII_PHYSID1) << 16 | phy_read(phy, MII_PHYSID2));
+ id = (sungem_phy_read(phy, MII_PHYSID1) << 16 | sungem_phy_read(phy, MII_PHYSID2));
/* Revision 0 of 5421 needs some fixups */
if (id == 0x002060e0) {
/* This is borrowed from MacOS
*/
- phy_write(phy, 0x18, 0x1007);
- data = phy_read(phy, 0x18);
- phy_write(phy, 0x18, data | 0x0400);
- phy_write(phy, 0x18, 0x0007);
- data = phy_read(phy, 0x18);
- phy_write(phy, 0x18, data | 0x0800);
- phy_write(phy, 0x17, 0x000a);
- data = phy_read(phy, 0x15);
- phy_write(phy, 0x15, data | 0x0200);
+ sungem_phy_write(phy, 0x18, 0x1007);
+ data = sungem_phy_read(phy, 0x18);
+ sungem_phy_write(phy, 0x18, data | 0x0400);
+ sungem_phy_write(phy, 0x18, 0x0007);
+ data = sungem_phy_read(phy, 0x18);
+ sungem_phy_write(phy, 0x18, data | 0x0800);
+ sungem_phy_write(phy, 0x17, 0x000a);
+ data = sungem_phy_read(phy, 0x15);
+ sungem_phy_write(phy, 0x15, data | 0x0200);
}
/* Pick up some init code from OF for K2 version */
if ((id & 0xfffffff0) == 0x002062e0) {
- phy_write(phy, 4, 0x01e1);
- phy_write(phy, 9, 0x0300);
+ sungem_phy_write(phy, 4, 0x01e1);
+ sungem_phy_write(phy, 9, 0x0300);
}
/* Check if we can enable automatic low power */
can_low_power = 0;
if (can_low_power) {
/* Enable automatic low-power */
- phy_write(phy, 0x1c, 0x9002);
- phy_write(phy, 0x1c, 0xa821);
- phy_write(phy, 0x1c, 0x941d);
+ sungem_phy_write(phy, 0x1c, 0x9002);
+ sungem_phy_write(phy, 0x1c, 0xa821);
+ sungem_phy_write(phy, 0x1c, 0x941d);
}
}
#endif /* CONFIG_PPC_PMAC */
phy->advertising = advertise;
/* Setup standard advertise */
- adv = phy_read(phy, MII_ADVERTISE);
+ adv = sungem_phy_read(phy, MII_ADVERTISE);
adv &= ~(ADVERTISE_ALL | ADVERTISE_100BASE4);
if (advertise & ADVERTISED_10baseT_Half)
adv |= ADVERTISE_10HALF;
adv |= ADVERTISE_PAUSE_CAP;
if (advertise & ADVERTISED_Asym_Pause)
adv |= ADVERTISE_PAUSE_ASYM;
- phy_write(phy, MII_ADVERTISE, adv);
+ sungem_phy_write(phy, MII_ADVERTISE, adv);
/* Setup 1000BT advertise */
- adv = phy_read(phy, MII_1000BASETCONTROL);
+ adv = sungem_phy_read(phy, MII_1000BASETCONTROL);
adv &= ~(MII_1000BASETCONTROL_FULLDUPLEXCAP|MII_1000BASETCONTROL_HALFDUPLEXCAP);
if (advertise & SUPPORTED_1000baseT_Half)
adv |= MII_1000BASETCONTROL_HALFDUPLEXCAP;
if (advertise & SUPPORTED_1000baseT_Full)
adv |= MII_1000BASETCONTROL_FULLDUPLEXCAP;
- phy_write(phy, MII_1000BASETCONTROL, adv);
+ sungem_phy_write(phy, MII_1000BASETCONTROL, adv);
/* Start/Restart aneg */
- ctl = phy_read(phy, MII_BMCR);
+ ctl = sungem_phy_read(phy, MII_BMCR);
ctl |= (BMCR_ANENABLE | BMCR_ANRESTART);
- phy_write(phy, MII_BMCR, ctl);
+ sungem_phy_write(phy, MII_BMCR, ctl);
return 0;
}
phy->duplex = fd;
phy->pause = 0;
- ctl = phy_read(phy, MII_BMCR);
+ ctl = sungem_phy_read(phy, MII_BMCR);
ctl &= ~(BMCR_FULLDPLX|BMCR_SPEED100|BMCR_SPD2|BMCR_ANENABLE);
/* First reset the PHY */
- phy_write(phy, MII_BMCR, ctl | BMCR_RESET);
+ sungem_phy_write(phy, MII_BMCR, ctl | BMCR_RESET);
/* Select speed & duplex */
switch(speed) {
// XXX Should we set the sungem to GII now on 1000BT ?
- phy_write(phy, MII_BMCR, ctl);
+ sungem_phy_write(phy, MII_BMCR, ctl);
return 0;
}
u16 val;
if (phy->autoneg) {
- val = phy_read(phy, MII_BCM5400_AUXSTATUS);
+ val = sungem_phy_read(phy, MII_BCM5400_AUXSTATUS);
link_mode = ((val & MII_BCM5400_AUXSTATUS_LINKMODE_MASK) >>
MII_BCM5400_AUXSTATUS_LINKMODE_SHIFT);
phy->duplex = phy_BCM5400_link_table[link_mode][0] ?
SPEED_1000 :
(phy_BCM5400_link_table[link_mode][1] ?
SPEED_100 : SPEED_10);
- val = phy_read(phy, MII_LPA);
+ val = sungem_phy_read(phy, MII_LPA);
phy->pause = (phy->duplex == DUPLEX_FULL) &&
((val & LPA_PAUSE) != 0);
}
u16 rev;
/* magic init sequence for rev 0 */
- rev = phy_read(phy, MII_PHYSID2) & 0x000f;
+ rev = sungem_phy_read(phy, MII_PHYSID2) & 0x000f;
if (rev == 0) {
- phy_write(phy, 0x1d, 0x000a);
- phy_write(phy, 0x1e, 0x0821);
+ sungem_phy_write(phy, 0x1d, 0x000a);
+ sungem_phy_write(phy, 0x1e, 0x0821);
- phy_write(phy, 0x1d, 0x0006);
- phy_write(phy, 0x1e, 0x8600);
+ sungem_phy_write(phy, 0x1d, 0x0006);
+ sungem_phy_write(phy, 0x1e, 0x8600);
- phy_write(phy, 0x1d, 0x000b);
- phy_write(phy, 0x1e, 0x0100);
+ sungem_phy_write(phy, 0x1d, 0x000b);
+ sungem_phy_write(phy, 0x1e, 0x0100);
- phy_write(phy, 0x1d, 0x0004);
- phy_write(phy, 0x1e, 0x4850);
+ sungem_phy_write(phy, 0x1d, 0x0004);
+ sungem_phy_write(phy, 0x1e, 0x4850);
}
return 0;
}
int mode;
/* find out in what mode we are */
- phy_write(phy, MII_NCONFIG, 0x1000);
- phy_reg = phy_read(phy, MII_NCONFIG);
+ sungem_phy_write(phy, MII_NCONFIG, 0x1000);
+ phy_reg = sungem_phy_read(phy, MII_NCONFIG);
mode = (phy_reg & BCM5421_MODE_MASK) >> 5;
return genmii_poll_link(phy);
/* try to find out whether we have a link */
- phy_write(phy, MII_NCONFIG, 0x2000);
- phy_reg = phy_read(phy, MII_NCONFIG);
+ sungem_phy_write(phy, MII_NCONFIG, 0x2000);
+ phy_reg = sungem_phy_read(phy, MII_NCONFIG);
if (phy_reg & 0x0020)
return 0;
int mode;
/* find out in what mode we are */
- phy_write(phy, MII_NCONFIG, 0x1000);
- phy_reg = phy_read(phy, MII_NCONFIG);
+ sungem_phy_write(phy, MII_NCONFIG, 0x1000);
+ phy_reg = sungem_phy_read(phy, MII_NCONFIG);
mode = (phy_reg & BCM5421_MODE_MASK ) >> 5;
phy->speed = SPEED_1000;
/* find out whether we are running half- or full duplex */
- phy_write(phy, MII_NCONFIG, 0x2000);
- phy_reg = phy_read(phy, MII_NCONFIG);
+ sungem_phy_write(phy, MII_NCONFIG, 0x2000);
+ phy_reg = sungem_phy_read(phy, MII_NCONFIG);
if ( (phy_reg & 0x0080) >> 7)
phy->duplex |= DUPLEX_HALF;
static int bcm5421_enable_fiber(struct mii_phy* phy, int autoneg)
{
/* enable fiber mode */
- phy_write(phy, MII_NCONFIG, 0x9020);
+ sungem_phy_write(phy, MII_NCONFIG, 0x9020);
/* LEDs active in both modes, autosense prio = fiber */
- phy_write(phy, MII_NCONFIG, 0x945f);
+ sungem_phy_write(phy, MII_NCONFIG, 0x945f);
if (!autoneg) {
/* switch off fibre autoneg */
- phy_write(phy, MII_NCONFIG, 0xfc01);
- phy_write(phy, 0x0b, 0x0004);
+ sungem_phy_write(phy, MII_NCONFIG, 0xfc01);
+ sungem_phy_write(phy, 0x0b, 0x0004);
}
phy->autoneg = autoneg;
int mode;
/* find out in what mode we are */
- phy_write(phy, MII_NCONFIG, 0x7c00);
- phy_reg = phy_read(phy, MII_NCONFIG);
+ sungem_phy_write(phy, MII_NCONFIG, 0x7c00);
+ phy_reg = sungem_phy_read(phy, MII_NCONFIG);
mode = (phy_reg & BCM5461_MODE_MASK ) >> 1;
return genmii_poll_link(phy);
/* find out whether we have a link */
- phy_write(phy, MII_NCONFIG, 0x7000);
- phy_reg = phy_read(phy, MII_NCONFIG);
+ sungem_phy_write(phy, MII_NCONFIG, 0x7000);
+ phy_reg = sungem_phy_read(phy, MII_NCONFIG);
if (phy_reg & BCM5461_FIBER_LINK)
return 1;
int mode;
/* find out in what mode we are */
- phy_write(phy, MII_NCONFIG, 0x7c00);
- phy_reg = phy_read(phy, MII_NCONFIG);
+ sungem_phy_write(phy, MII_NCONFIG, 0x7c00);
+ phy_reg = sungem_phy_read(phy, MII_NCONFIG);
mode = (phy_reg & BCM5461_MODE_MASK ) >> 1;
phy->speed = SPEED_1000;
/* find out whether we are running half- or full duplex */
- phy_write(phy, MII_NCONFIG, 0x7000);
- phy_reg = phy_read(phy, MII_NCONFIG);
+ sungem_phy_write(phy, MII_NCONFIG, 0x7000);
+ phy_reg = sungem_phy_read(phy, MII_NCONFIG);
if (phy_reg & BCM5461_FIBER_DUPLEX)
phy->duplex |= DUPLEX_FULL;
static int bcm5461_enable_fiber(struct mii_phy* phy, int autoneg)
{
/* select fiber mode, enable 1000 base-X registers */
- phy_write(phy, MII_NCONFIG, 0xfc0b);
+ sungem_phy_write(phy, MII_NCONFIG, 0xfc0b);
if (autoneg) {
/* enable fiber with no autonegotiation */
- phy_write(phy, MII_ADVERTISE, 0x01e0);
- phy_write(phy, MII_BMCR, 0x1140);
+ sungem_phy_write(phy, MII_ADVERTISE, 0x01e0);
+ sungem_phy_write(phy, MII_BMCR, 0x1140);
} else {
/* enable fiber with autonegotiation */
- phy_write(phy, MII_BMCR, 0x0140);
+ sungem_phy_write(phy, MII_BMCR, 0x0140);
}
phy->autoneg = autoneg;
phy->advertising = advertise;
/* Setup standard advertise */
- adv = phy_read(phy, MII_ADVERTISE);
+ adv = sungem_phy_read(phy, MII_ADVERTISE);
adv &= ~(ADVERTISE_ALL | ADVERTISE_100BASE4);
if (advertise & ADVERTISED_10baseT_Half)
adv |= ADVERTISE_10HALF;
adv |= ADVERTISE_PAUSE_CAP;
if (advertise & ADVERTISED_Asym_Pause)
adv |= ADVERTISE_PAUSE_ASYM;
- phy_write(phy, MII_ADVERTISE, adv);
+ sungem_phy_write(phy, MII_ADVERTISE, adv);
/* Setup 1000BT advertise & enable crossover detect
* XXX How do we advertise 1000BT ? Darwin source is
* write to control... Someone has specs for those
* beasts ?
*/
- adv = phy_read(phy, MII_M1011_PHY_SPEC_CONTROL);
+ adv = sungem_phy_read(phy, MII_M1011_PHY_SPEC_CONTROL);
adv |= MII_M1011_PHY_SPEC_CONTROL_AUTO_MDIX;
adv &= ~(MII_1000BASETCONTROL_FULLDUPLEXCAP |
MII_1000BASETCONTROL_HALFDUPLEXCAP);
adv |= MII_1000BASETCONTROL_HALFDUPLEXCAP;
if (advertise & SUPPORTED_1000baseT_Full)
adv |= MII_1000BASETCONTROL_FULLDUPLEXCAP;
- phy_write(phy, MII_1000BASETCONTROL, adv);
+ sungem_phy_write(phy, MII_1000BASETCONTROL, adv);
/* Start/Restart aneg */
- ctl = phy_read(phy, MII_BMCR);
+ ctl = sungem_phy_read(phy, MII_BMCR);
ctl |= (BMCR_ANENABLE | BMCR_ANRESTART);
- phy_write(phy, MII_BMCR, ctl);
+ sungem_phy_write(phy, MII_BMCR, ctl);
return 0;
}
phy->duplex = fd;
phy->pause = 0;
- ctl = phy_read(phy, MII_BMCR);
+ ctl = sungem_phy_read(phy, MII_BMCR);
ctl &= ~(BMCR_FULLDPLX|BMCR_SPEED100|BMCR_SPD2|BMCR_ANENABLE);
ctl |= BMCR_RESET;
/* Disable crossover. Again, the way Apple does it is strange,
* though I don't assume they are wrong ;)
*/
- ctl2 = phy_read(phy, MII_M1011_PHY_SPEC_CONTROL);
+ ctl2 = sungem_phy_read(phy, MII_M1011_PHY_SPEC_CONTROL);
ctl2 &= ~(MII_M1011_PHY_SPEC_CONTROL_MANUAL_MDIX |
MII_M1011_PHY_SPEC_CONTROL_AUTO_MDIX |
MII_1000BASETCONTROL_FULLDUPLEXCAP |
ctl2 |= (fd == DUPLEX_FULL) ?
MII_1000BASETCONTROL_FULLDUPLEXCAP :
MII_1000BASETCONTROL_HALFDUPLEXCAP;
- phy_write(phy, MII_1000BASETCONTROL, ctl2);
+ sungem_phy_write(phy, MII_1000BASETCONTROL, ctl2);
// XXX Should we set the sungem to GII now on 1000BT ?
- phy_write(phy, MII_BMCR, ctl);
+ sungem_phy_write(phy, MII_BMCR, ctl);
return 0;
}
u16 status, pmask;
if (phy->autoneg) {
- status = phy_read(phy, MII_M1011_PHY_SPEC_STATUS);
+ status = sungem_phy_read(phy, MII_M1011_PHY_SPEC_STATUS);
if ((status & MII_M1011_PHY_SPEC_STATUS_RESOLVED) == 0)
return -EAGAIN;
if (status & MII_M1011_PHY_SPEC_STATUS_1000)
goto fail;
/* Read ID and find matching entry */
- id = (phy_read(phy, MII_PHYSID1) << 16 | phy_read(phy, MII_PHYSID2));
+ id = (sungem_phy_read(phy, MII_PHYSID1) << 16 | sungem_phy_read(phy, MII_PHYSID2));
printk(KERN_DEBUG KBUILD_MODNAME ": " "PHY ID: %x, addr: %x\n",
id, mii_id);
for (i=0; (def = mii_phy_table[i]) != NULL; i++)