ramips: add support for Edimax EW-7478APC

SoC:	MediaTek MT7620a @ 580MHz
RAM:	64M (Winbond W9751G6KB-25)
FLASH:	8MB (Macronix)
WiFi:	SoC-integrated: MediaTek MT7620a bgn
WiFi:	MediaTek MT7612EN nac
Switch: Mediatek MT7530W Gigabit Switch (4 x LAN, 1 x WAN)
USB:	Yes 1 x 2.0 (+ 1 x 2.0 unpopulated header)
BTN:	Reset/WPS
LED:    - Power (white)
	- Internet (blue)
	- Wifi (blue)
	- USB (blue)
UART:  UART is present as Pads with throughholes on the PCB. They are
       located in the lower right corner (GbE ports facing up)
       3.3V - RX - GND - TX / 57600-8N1
       3.3V is the square pad

Installation
------------
Update the factory image via the web-interfaces (by default:
http://edimax.setup)

Signed-off-by: Birger Koblitz <mail@birger-koblitz.de>
[merge conflicts in 01_leds and mt7620.mk, dts whitespace issues]
Signed-off-by: Petr Štetiar <ynezz@true.cz>

diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds
index 658e3512ca27389f914f6f001d301fb2d2afae08..bccf68f8e52225ffa64775b5515ad88eaaeb436a 100755 (executable)
--- a/target/linux/ramips/base-files/etc/board.d/01_leds
+++ b/target/linux/ramips/base-files/etc/board.d/01_leds
@@ -35,7 +35,8 @@ alfa-network,ac1200rm)
        set_wifi_led "$boardname:green:wlan2g" "wlan1"
        ;;
 alfa-network,awusfree1|\
-edimax,br-6478ac-v2)
+edimax,br-6478ac-v2|\
+edimax,ew-7478apc)
        set_wifi_led "$boardname:blue:wlan"
        ;;
 edimax,ew-7476rpc|\

diff --git a/target/linux/ramips/dts/EW-7478APC.dts b/target/linux/ramips/dts/EW-7478APC.dts
new file mode 100644 (file)
index 0000000..bd1768b
--- /dev/null
+++ b/target/linux/ramips/dts/EW-7478APC.dts
@@ -0,0 +1,202 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include "mt7620a.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+       compatible = "edimax,ew-7478apc", "ralink,mt7620a-soc";
+       model = "Edimax EW-7478APC";
+
+       aliases {
+               led-boot = &led_power;
+               led-failsafe = &led_power;
+               led-running = &led_power;
+               led-upgrade = &led_power;
+       };
+
+       chosen {
+               bootargs = "console=ttyS0,57600";
+       };
+
+       keys {
+               compatible = "gpio-keys-polled";
+               poll-interval = <20>;
+
+               reset_wps {
+                       label = "reset_wps";
+                       gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_RESTART>;
+               };
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               led_power: power {
+                       label = "ew-7478apc:white:power";
+                       gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
+               };
+
+               internet {
+                       label = "ew-7478apc:blue:internet";
+                       gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
+               };
+
+               wlan {
+                       label = "ew-7478apc:blue:wlan";
+                       gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+               };
+
+               usb {
+                       label = "ew-7478apc:blue:usb";
+                       gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+                       trigger-sources = <&ohci_port1>, <&ehci_port1>;
+                       linux,default-trigger = "usbport";
+               };
+       };
+};
+
+&gpio2 {
+       status = "okay";
+
+       enable_usb_power {
+               gpio-hog;
+               line-name = "enable USB power";
+               gpios = <5 GPIO_ACTIVE_HIGH>;
+               output-high;
+       };
+};
+
+&spi0 {
+       status = "okay";
+
+       flash@0 {
+               compatible = "jedec,spi-nor";
+               reg = <0>;
+               spi-max-frequency = <10000000>;
+
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               label = "u-boot";
+                               reg = <0x0 0x30000>;
+                               read-only;
+                       };
+
+                       partition@30000 {
+                               label = "u-boot-env";
+                               reg = <0x30000 0x10000>;
+                               read-only;
+                       };
+
+                       factory: partition@40000 {
+                               label = "factory";
+                               reg = <0x40000 0x10000>;
+                               read-only;
+                       };
+
+                       partition@50000 {
+                               label = "cimage";
+                               reg = <0x50000 0x20000>;
+                               read-only;
+                       };
+
+                       partition@70000 {
+                               compatible = "edimax,uimage";
+                               label = "firmware";
+                               reg = <0x00070000 0x00790000>;
+                       };
+               };
+       };
+};
+
+&pinctrl {
+       state_default: pinctrl0 {
+               gpio {
+                       ralink,group = "i2c", "uartf", "nd_sd";
+                       ralink,function = "gpio";
+               };
+       };
+};
+
+&ethernet {
+       status = "okay";
+       mtd-mac-address = <&factory 0x4>;
+       pinctrl-names = "default";
+       pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>;
+       mediatek,portmap = "wllll";
+
+       port@5 {
+               status = "okay";
+               mediatek,fixed-link = <1000 1 1 1>;
+               phy-mode = "rgmii";
+       };
+
+       mdio-bus {
+               status = "okay";
+
+               phy0: ethernet-phy@0 {
+                       reg = <0>;
+                       phy-mode = "rgmii";
+               };
+
+               phy1: ethernet-phy@1 {
+                       reg = <1>;
+                       phy-mode = "rgmii";
+               };
+
+               phy2: ethernet-phy@2 {
+                       reg = <2>;
+                       phy-mode = "rgmii";
+               };
+
+               phy3: ethernet-phy@3 {
+                       reg = <3>;
+                       phy-mode = "rgmii";
+               };
+
+               phy4: ethernet-phy@4 {
+                       reg = <4>;
+                       phy-mode = "rgmii";
+               };
+
+               phy1f: ethernet-phy@1f {
+                       reg = <0x1f>;
+                       phy-mode = "rgmii";
+               };
+       };
+};
+
+&gsw {
+       mediatek,port4 = "gmac";
+};
+
+&wmac {
+       ralink,mtd-eeprom = <&factory 0>;
+};
+
+&pcie {
+       status = "okay";
+};
+
+&pcie0 {
+       wifi@0,0 {
+               reg = <0x0000 0 0 0 0>;
+               mediatek,mtd-eeprom = <&factory 0x8000>;
+               mediatek,2ghz = <0>;
+       };
+};
+
+&ehci {
+       status = "okay";
+};
+
+&ohci {
+       status = "okay";
+};

diff --git a/target/linux/ramips/image/mt7620.mk b/target/linux/ramips/image/mt7620.mk
index 721cd7f43d8dc028570a49fee67d5392b725909d..077834edc855c8d878933e381642bc2976331bbe 100644 (file)
--- a/target/linux/ramips/image/mt7620.mk
+++ b/target/linux/ramips/image/mt7620.mk
@@ -642,6 +642,18 @@ define Device/edimax_ew-7478ac
 endef
 TARGET_DEVICES += edimax_ew-7478ac
 
+define Device/edimax_ew-7478apc
+  DTS := EW-7478APC
+  DEVICE_TITLE := Edimax EW-7478APC
+  BLOCKSIZE := 4k
+  IMAGE_SIZE := 7744k
+  IMAGE/sysupgrade.bin := append-kernel | append-rootfs | \
+        edimax-header -s CSYS -m RN75 -f 0x70000 -S 0x01100000 | pad-rootfs | \
+        append-metadata | check-size $$$$(IMAGE_SIZE)
+  DEVICE_PACKAGES := kmod-mt76x2 kmod-usb2 kmod-usb-ohci kmod-usb-ledtrig-usbport
+endef
+TARGET_DEVICES += edimax_ew-7478apc
+
 define Device/tplink_c2-v1
   $(Device/Archer)
   DTS := ArcherC2-v1