# Driver interface for no driver (e.g., RADIUS server only)
#CONFIG_DRIVER_NONE=y
-# IEEE 802.11F/IAPP
-#CONFIG_IAPP=y
-
# WPA2/IEEE 802.11i RSN pre-authentication
CONFIG_RSN_PREAUTH=y
-# IEEE 802.11w (management frame protection)
-#CONFIG_IEEE80211W=y
-
# Support Operating Channel Validation
CONFIG_OCV=y
# the IEEE 802.11 Management capability (e.g., FreeBSD/net80211)
#CONFIG_DRIVER_RADIUS_ACL=y
-# IEEE 802.11n (High Throughput) support
-CONFIG_IEEE80211N=y
-
# Wireless Network Management (IEEE Std 802.11v-2011)
# Note: This is experimental and not complete implementation.
#CONFIG_WNM=y
CONFIG_IEEE80211AC=y
# IEEE 802.11ax HE support
+#CONFIG_IEEE80211AX=y
+
+# IEEE 802.11be EHT support
+# CONFIG_IEEE80211AX is mandatory for setting CONFIG_IEEE80211BE.
# Note: This is experimental and work in progress. The definitions are still
# subject to change and this should not be expected to interoperate with the
-# final IEEE 802.11ax version.
-#CONFIG_IEEE80211AX=y
+# final IEEE 802.11be version.
+#CONFIG_IEEE80211BE=y
+
+# Simultaneous Authentication of Equals (SAE), WPA3-Personal
+#CONFIG_SAE=y
+
+# SAE Public Key, WPA3-Personal
+#CONFIG_SAE_PK=y
# Remove debugging code that is printing out debug messages to stdout.
# This can be used to reduce the size of the hostapd considerably if debugging
# * ath10k
#
# For more details refer to:
-# http://wireless.kernel.org/en/users/Documentation/acs
+# https://wireless.wiki.kernel.org/en/users/documentation/acs
#
#CONFIG_ACS=y
# Multiband Operation support
-# These extentions facilitate efficient use of multiple frequency bands
+# These extensions facilitate efficient use of multiple frequency bands
# available to the AP and the devices that may associate with it.
#CONFIG_MBO=y
# Airtime policy support
CONFIG_AIRTIME_POLICY=y
-# Proxy ARP support
-#CONFIG_PROXYARP=y
-
# Override default value for the wpa_disable_eapol_key_retries configuration
# parameter. See that parameter in hostapd.conf for more details.
#CFLAGS += -DDEFAULT_WPA_DISABLE_EAPOL_KEY_RETRIES=1
+# Wired equivalent privacy (WEP)
+# WEP is an obsolete cryptographic data confidentiality algorithm that is not
+# considered secure. It should not be used for anything anymore. The
+# functionality needed to use WEP is available in the current hostapd
+# release under this optional build parameter. This functionality is subject to
+# be completely removed in a future release.
+#CONFIG_WEP=y
+
+# Remove all TKIP functionality
+# TKIP is an old cryptographic data confidentiality algorithm that is not
+# considered secure. It should not be used anymore. For now, the default hostapd
+# build includes this to allow mixed mode WPA+WPA2 networks to be enabled, but
+# that functionality is subject to be removed in the future.
+#CONFIG_NO_TKIP=y
+
+# Pre-Association Security Negotiation (PASN)
+# Experimental implementation based on IEEE P802.11z/D2.6 and the protocol
+# design is still subject to change. As such, this should not yet be enabled in
+# production use.
+#CONFIG_PASN=y
+
+# Device Provisioning Protocol (DPP) (also known as Wi-Fi Easy Connect)
+#CONFIG_DPP=y
+# DPP version 2 support
+#CONFIG_DPP2=y
+# DPP version 3 support (experimental and still changing; do not enable for
+# production use)
+#CONFIG_DPP3=y
+
# uBus IPC/RPC System
# Services can connect to the bus and provide methods
# that can be called by other services or clients.
# Driver interface for no driver (e.g., RADIUS server only)
#CONFIG_DRIVER_NONE=y
-# IEEE 802.11F/IAPP
-CONFIG_IAPP=y
-
# WPA2/IEEE 802.11i RSN pre-authentication
CONFIG_RSN_PREAUTH=y
-# IEEE 802.11w (management frame protection)
-#CONFIG_IEEE80211W=y
-
# Support Operating Channel Validation
CONFIG_OCV=y
# the IEEE 802.11 Management capability (e.g., FreeBSD/net80211)
#CONFIG_DRIVER_RADIUS_ACL=y
-# IEEE 802.11n (High Throughput) support
-CONFIG_IEEE80211N=y
-
# Wireless Network Management (IEEE Std 802.11v-2011)
# Note: This is experimental and not complete implementation.
CONFIG_WNM=y
CONFIG_IEEE80211AC=y
# IEEE 802.11ax HE support
+#CONFIG_IEEE80211AX=y
+
+# IEEE 802.11be EHT support
+# CONFIG_IEEE80211AX is mandatory for setting CONFIG_IEEE80211BE.
# Note: This is experimental and work in progress. The definitions are still
# subject to change and this should not be expected to interoperate with the
-# final IEEE 802.11ax version.
-#CONFIG_IEEE80211AX=y
+# final IEEE 802.11be version.
+#CONFIG_IEEE80211BE=y
+
+# Simultaneous Authentication of Equals (SAE), WPA3-Personal
+#CONFIG_SAE=y
+
+# SAE Public Key, WPA3-Personal
+#CONFIG_SAE_PK=y
# Remove debugging code that is printing out debug messages to stdout.
# This can be used to reduce the size of the hostapd considerably if debugging
# * ath10k
#
# For more details refer to:
-# http://wireless.kernel.org/en/users/Documentation/acs
+# https://wireless.wiki.kernel.org/en/users/documentation/acs
#
#CONFIG_ACS=y
# Multiband Operation support
-# These extentions facilitate efficient use of multiple frequency bands
+# These extensions facilitate efficient use of multiple frequency bands
# available to the AP and the devices that may associate with it.
#CONFIG_MBO=y
# Airtime policy support
CONFIG_AIRTIME_POLICY=y
-# Proxy ARP support
-CONFIG_PROXYARP=y
-
# Override default value for the wpa_disable_eapol_key_retries configuration
# parameter. See that parameter in hostapd.conf for more details.
#CFLAGS += -DDEFAULT_WPA_DISABLE_EAPOL_KEY_RETRIES=1
+# Wired equivalent privacy (WEP)
+# WEP is an obsolete cryptographic data confidentiality algorithm that is not
+# considered secure. It should not be used for anything anymore. The
+# functionality needed to use WEP is available in the current hostapd
+# release under this optional build parameter. This functionality is subject to
+# be completely removed in a future release.
+#CONFIG_WEP=y
+
+# Remove all TKIP functionality
+# TKIP is an old cryptographic data confidentiality algorithm that is not
+# considered secure. It should not be used anymore. For now, the default hostapd
+# build includes this to allow mixed mode WPA+WPA2 networks to be enabled, but
+# that functionality is subject to be removed in the future.
+#CONFIG_NO_TKIP=y
+
+# Pre-Association Security Negotiation (PASN)
+# Experimental implementation based on IEEE P802.11z/D2.6 and the protocol
+# design is still subject to change. As such, this should not yet be enabled in
+# production use.
+#CONFIG_PASN=y
+
+# Device Provisioning Protocol (DPP) (also known as Wi-Fi Easy Connect)
+#CONFIG_DPP=y
+# DPP version 2 support
+#CONFIG_DPP2=y
+# DPP version 3 support (experimental and still changing; do not enable for
+# production use)
+#CONFIG_DPP3=y
+
# uBus IPC/RPC System
# Services can connect to the bus and provide methods
# that can be called by other services or clients.
# Driver interface for no driver (e.g., RADIUS server only)
#CONFIG_DRIVER_NONE=y
-# IEEE 802.11F/IAPP
-#CONFIG_IAPP=y
-
# WPA2/IEEE 802.11i RSN pre-authentication
CONFIG_RSN_PREAUTH=y
-# IEEE 802.11w (management frame protection)
-#CONFIG_IEEE80211W=y
-
# Support Operating Channel Validation
#CONFIG_OCV=y
# the IEEE 802.11 Management capability (e.g., FreeBSD/net80211)
#CONFIG_DRIVER_RADIUS_ACL=y
-# IEEE 802.11n (High Throughput) support
-CONFIG_IEEE80211N=y
-
# Wireless Network Management (IEEE Std 802.11v-2011)
# Note: This is experimental and not complete implementation.
#CONFIG_WNM=y
CONFIG_IEEE80211AC=y
# IEEE 802.11ax HE support
+#CONFIG_IEEE80211AX=y
+
+# IEEE 802.11be EHT support
+# CONFIG_IEEE80211AX is mandatory for setting CONFIG_IEEE80211BE.
# Note: This is experimental and work in progress. The definitions are still
# subject to change and this should not be expected to interoperate with the
-# final IEEE 802.11ax version.
-#CONFIG_IEEE80211AX=y
+# final IEEE 802.11be version.
+#CONFIG_IEEE80211BE=y
+
+# Simultaneous Authentication of Equals (SAE), WPA3-Personal
+#CONFIG_SAE=y
+
+# SAE Public Key, WPA3-Personal
+#CONFIG_SAE_PK=y
# Remove debugging code that is printing out debug messages to stdout.
# This can be used to reduce the size of the hostapd considerably if debugging
# * ath10k
#
# For more details refer to:
-# http://wireless.kernel.org/en/users/Documentation/acs
+# https://wireless.wiki.kernel.org/en/users/documentation/acs
#
#CONFIG_ACS=y
# Multiband Operation support
-# These extentions facilitate efficient use of multiple frequency bands
+# These extensions facilitate efficient use of multiple frequency bands
# available to the AP and the devices that may associate with it.
#CONFIG_MBO=y
# Airtime policy support
#CONFIG_AIRTIME_POLICY=y
-# Proxy ARP support
-#CONFIG_PROXYARP=y
-
# Override default value for the wpa_disable_eapol_key_retries configuration
# parameter. See that parameter in hostapd.conf for more details.
#CFLAGS += -DDEFAULT_WPA_DISABLE_EAPOL_KEY_RETRIES=1
+# Wired equivalent privacy (WEP)
+# WEP is an obsolete cryptographic data confidentiality algorithm that is not
+# considered secure. It should not be used for anything anymore. The
+# functionality needed to use WEP is available in the current hostapd
+# release under this optional build parameter. This functionality is subject to
+# be completely removed in a future release.
+#CONFIG_WEP=y
+
+# Remove all TKIP functionality
+# TKIP is an old cryptographic data confidentiality algorithm that is not
+# considered secure. It should not be used anymore. For now, the default hostapd
+# build includes this to allow mixed mode WPA+WPA2 networks to be enabled, but
+# that functionality is subject to be removed in the future.
+#CONFIG_NO_TKIP=y
+
+# Pre-Association Security Negotiation (PASN)
+# Experimental implementation based on IEEE P802.11z/D2.6 and the protocol
+# design is still subject to change. As such, this should not yet be enabled in
+# production use.
+#CONFIG_PASN=y
+
+# Device Provisioning Protocol (DPP) (also known as Wi-Fi Easy Connect)
+#CONFIG_DPP=y
+# DPP version 2 support
+#CONFIG_DPP2=y
+# DPP version 3 support (experimental and still changing; do not enable for
+# production use)
+#CONFIG_DPP3=y
+
# uBus IPC/RPC System
# Services can connect to the bus and provide methods
# that can be called by other services or clients.
# EAP-TLS
#CONFIG_EAP_TLS=y
+# Enable EAP-TLSv1.3 support by default (currently disabled unless explicitly
+# enabled in network configuration)
+#CONFIG_EAP_TLSV1_3=y
# EAL-PEAP
#CONFIG_EAP_PEAP=y
# Support VHT overrides (disable VHT, mask MCS rates, etc.)
CONFIG_VHT_OVERRIDES=y
+# Support HE overrides
+CONFIG_HE_OVERRIDES=y
+
# Development testing
#CONFIG_EAPOL_TEST=y
# Simultaneous Authentication of Equals (SAE), WPA3-Personal
#CONFIG_SAE=y
-# Disable scan result processing (ap_mode=1) to save code size by about 1 kB.
+# SAE Public Key, WPA3-Personal
+#CONFIG_SAE_PK=y
+
+# Disable scan result processing (ap_scan=1) to save code size by about 1 kB.
# This can be used if ap_scan=1 mode is never enabled.
#CONFIG_NO_SCAN_PROCESSING=y
# bridge interfaces (commit 'bridge: respect RFC2863 operational state')').
CONFIG_NO_LINUX_PACKET_SOCKET_WAR=y
-# IEEE 802.11w (management frame protection), also known as PMF
-# Driver support is also needed for IEEE 802.11w.
-#CONFIG_IEEE80211W=y
-
# Support Operating Channel Validation
CONFIG_OCV=y
#PLATFORMSDKLIB="/opt/Program Files/Microsoft Platform SDK/Lib"
# Add support for new DBus control interface
-# (fi.w1.hostap.wpa_supplicant1)
+# (fi.w1.wpa_supplicant1)
#CONFIG_CTRL_IFACE_DBUS_NEW=y
# Add introspection support for new DBus control interface
# Requires glibc 2.25 to build, falls back to /dev/random if unavailable.
CONFIG_GETRANDOM=y
-# IEEE 802.11n (High Throughput) support (mainly for AP mode)
-#CONFIG_IEEE80211N=y
-
# IEEE 802.11ac (Very High Throughput) support (mainly for AP mode)
-# (depends on CONFIG_IEEE80211N)
#CONFIG_IEEE80211AC=y
+# IEEE 802.11ax HE support (mainly for AP mode)
+#CONFIG_IEEE80211AX=y
+
+# IEEE 802.11be EHT support (mainly for AP mode)
+# CONFIG_IEEE80211AX is mandatory for setting CONFIG_IEEE80211BE.
+# Note: This is experimental and work in progress. The definitions are still
+# subject to change and this should not be expected to interoperate with the
+# final IEEE 802.11be version.
+#CONFIG_IEEE80211BE=y
+
# Wireless Network Management (IEEE Std 802.11v-2011)
# Note: This is experimental and not complete implementation.
#CONFIG_WNM=y
#
# External password backend for testing purposes (developer use)
#CONFIG_EXT_PASSWORD_TEST=y
+# File-based backend to read passwords from an external file.
+#CONFIG_EXT_PASSWORD_FILE=y
# Enable Fast Session Transfer (FST)
#CONFIG_FST=y
# Experimental implementation of draft-harkins-owe-07.txt
#CONFIG_OWE=y
-# Device Provisioning Protocol (DPP)
-# This requires CONFIG_IEEE80211W=y to be enabled, too. (see
-# wpa_supplicant/README-DPP for details)
+# Device Provisioning Protocol (DPP) (also known as Wi-Fi Easy Connect)
#CONFIG_DPP=y
+# DPP version 2 support
+#CONFIG_DPP2=y
+# DPP version 3 support (experimental and still changing; do not enable for
+# production use)
+#CONFIG_DPP3=y
+
+# Wired equivalent privacy (WEP)
+# WEP is an obsolete cryptographic data confidentiality algorithm that is not
+# considered secure. It should not be used for anything anymore. The
+# functionality needed to use WEP is available in the current wpa_supplicant
+# release under this optional build parameter. This functionality is subject to
+# be completely removed in a future release.
+#CONFIG_WEP=y
+
+# Remove all TKIP functionality
+# TKIP is an old cryptographic data confidentiality algorithm that is not
+# considered secure. It should not be used anymore for anything else than a
+# backwards compatibility option as a group cipher when connecting to APs that
+# use WPA+WPA2 mixed mode. For now, the default wpa_supplicant build includes
+# support for this by default, but that functionality is subject to be removed
+# in the future.
+#CONFIG_NO_TKIP=y
+
+# Pre-Association Security Negotiation (PASN)
+# Experimental implementation based on IEEE P802.11z/D2.6 and the protocol
+# design is still subject to change. As such, this should not yet be enabled in
+# production use.
+#CONFIG_PASN=y
# uBus IPC/RPC System
# Services can connect to the bus and provide methods
# EAP-TLS
CONFIG_EAP_TLS=y
+# Enable EAP-TLSv1.3 support by default (currently disabled unless explicitly
+# enabled in network configuration)
+#CONFIG_EAP_TLSV1_3=y
# EAL-PEAP
CONFIG_EAP_PEAP=y
# Support VHT overrides (disable VHT, mask MCS rates, etc.)
CONFIG_VHT_OVERRIDES=y
+# Support HE overrides
+CONFIG_HE_OVERRIDES=y
+
# Development testing
#CONFIG_EAPOL_TEST=y
# Simultaneous Authentication of Equals (SAE), WPA3-Personal
#CONFIG_SAE=y
-# Disable scan result processing (ap_mode=1) to save code size by about 1 kB.
+# SAE Public Key, WPA3-Personal
+#CONFIG_SAE_PK=y
+
+# Disable scan result processing (ap_scan=1) to save code size by about 1 kB.
# This can be used if ap_scan=1 mode is never enabled.
#CONFIG_NO_SCAN_PROCESSING=y
# bridge interfaces (commit 'bridge: respect RFC2863 operational state')').
CONFIG_NO_LINUX_PACKET_SOCKET_WAR=y
-# IEEE 802.11w (management frame protection), also known as PMF
-# Driver support is also needed for IEEE 802.11w.
-#CONFIG_IEEE80211W=y
-
# Support Operating Channel Validation
CONFIG_OCV=y
#PLATFORMSDKLIB="/opt/Program Files/Microsoft Platform SDK/Lib"
# Add support for new DBus control interface
-# (fi.w1.hostap.wpa_supplicant1)
+# (fi.w1.wpa_supplicant1)
#CONFIG_CTRL_IFACE_DBUS_NEW=y
# Add introspection support for new DBus control interface
# Requires glibc 2.25 to build, falls back to /dev/random if unavailable.
CONFIG_GETRANDOM=y
-# IEEE 802.11n (High Throughput) support (mainly for AP mode)
-#CONFIG_IEEE80211N=y
-
# IEEE 802.11ac (Very High Throughput) support (mainly for AP mode)
-# (depends on CONFIG_IEEE80211N)
#CONFIG_IEEE80211AC=y
+# IEEE 802.11ax HE support (mainly for AP mode)
+#CONFIG_IEEE80211AX=y
+
+# IEEE 802.11be EHT support (mainly for AP mode)
+# CONFIG_IEEE80211AX is mandatory for setting CONFIG_IEEE80211BE.
+# Note: This is experimental and work in progress. The definitions are still
+# subject to change and this should not be expected to interoperate with the
+# final IEEE 802.11be version.
+#CONFIG_IEEE80211BE=y
+
# Wireless Network Management (IEEE Std 802.11v-2011)
# Note: This is experimental and not complete implementation.
CONFIG_WNM=y
#
# External password backend for testing purposes (developer use)
#CONFIG_EXT_PASSWORD_TEST=y
+# File-based backend to read passwords from an external file.
+#CONFIG_EXT_PASSWORD_FILE=y
# Enable Fast Session Transfer (FST)
#CONFIG_FST=y
# Experimental implementation of draft-harkins-owe-07.txt
#CONFIG_OWE=y
-# Device Provisioning Protocol (DPP)
-# This requires CONFIG_IEEE80211W=y to be enabled, too. (see
-# wpa_supplicant/README-DPP for details)
+# Device Provisioning Protocol (DPP) (also known as Wi-Fi Easy Connect)
#CONFIG_DPP=y
+# DPP version 2 support
+#CONFIG_DPP2=y
+# DPP version 3 support (experimental and still changing; do not enable for
+# production use)
+#CONFIG_DPP3=y
+
+# Wired equivalent privacy (WEP)
+# WEP is an obsolete cryptographic data confidentiality algorithm that is not
+# considered secure. It should not be used for anything anymore. The
+# functionality needed to use WEP is available in the current wpa_supplicant
+# release under this optional build parameter. This functionality is subject to
+# be completely removed in a future release.
+#CONFIG_WEP=y
+
+# Remove all TKIP functionality
+# TKIP is an old cryptographic data confidentiality algorithm that is not
+# considered secure. It should not be used anymore for anything else than a
+# backwards compatibility option as a group cipher when connecting to APs that
+# use WPA+WPA2 mixed mode. For now, the default wpa_supplicant build includes
+# support for this by default, but that functionality is subject to be removed
+# in the future.
+#CONFIG_NO_TKIP=y
+
+# Pre-Association Security Negotiation (PASN)
+# Experimental implementation based on IEEE P802.11z/D2.6 and the protocol
+# design is still subject to change. As such, this should not yet be enabled in
+# production use.
+#CONFIG_PASN=y
# uBus IPC/RPC System
# Services can connect to the bus and provide methods
# EAP-TLS
#CONFIG_EAP_TLS=y
+# Enable EAP-TLSv1.3 support by default (currently disabled unless explicitly
+# enabled in network configuration)
+#CONFIG_EAP_TLSV1_3=y
# EAL-PEAP
#CONFIG_EAP_PEAP=y
# Support VHT overrides (disable VHT, mask MCS rates, etc.)
CONFIG_VHT_OVERRIDES=y
+# Support HE overrides
+CONFIG_HE_OVERRIDES=y
+
# Development testing
#CONFIG_EAPOL_TEST=y
# Simultaneous Authentication of Equals (SAE), WPA3-Personal
#CONFIG_SAE=y
-# Disable scan result processing (ap_mode=1) to save code size by about 1 kB.
+# SAE Public Key, WPA3-Personal
+#CONFIG_SAE_PK=y
+
+# Disable scan result processing (ap_scan=1) to save code size by about 1 kB.
# This can be used if ap_scan=1 mode is never enabled.
#CONFIG_NO_SCAN_PROCESSING=y
# bridge interfaces (commit 'bridge: respect RFC2863 operational state')').
CONFIG_NO_LINUX_PACKET_SOCKET_WAR=y
-# IEEE 802.11w (management frame protection), also known as PMF
-# Driver support is also needed for IEEE 802.11w.
-#CONFIG_IEEE80211W=y
-
# Support Operating Channel Validation
-#CONFIG_OCV=y
+CONFIG_OCV=y
# Select TLS implementation
# openssl = OpenSSL (default)
#PLATFORMSDKLIB="/opt/Program Files/Microsoft Platform SDK/Lib"
# Add support for new DBus control interface
-# (fi.w1.hostap.wpa_supplicant1)
+# (fi.w1.wpa_supplicant1)
#CONFIG_CTRL_IFACE_DBUS_NEW=y
# Add introspection support for new DBus control interface
# Requires glibc 2.25 to build, falls back to /dev/random if unavailable.
CONFIG_GETRANDOM=y
-# IEEE 802.11n (High Throughput) support (mainly for AP mode)
-#CONFIG_IEEE80211N=y
-
# IEEE 802.11ac (Very High Throughput) support (mainly for AP mode)
-# (depends on CONFIG_IEEE80211N)
#CONFIG_IEEE80211AC=y
+# IEEE 802.11ax HE support (mainly for AP mode)
+#CONFIG_IEEE80211AX=y
+
+# IEEE 802.11be EHT support (mainly for AP mode)
+# CONFIG_IEEE80211AX is mandatory for setting CONFIG_IEEE80211BE.
+# Note: This is experimental and work in progress. The definitions are still
+# subject to change and this should not be expected to interoperate with the
+# final IEEE 802.11be version.
+#CONFIG_IEEE80211BE=y
+
# Wireless Network Management (IEEE Std 802.11v-2011)
# Note: This is experimental and not complete implementation.
#CONFIG_WNM=y
#
# External password backend for testing purposes (developer use)
#CONFIG_EXT_PASSWORD_TEST=y
+# File-based backend to read passwords from an external file.
+#CONFIG_EXT_PASSWORD_FILE=y
# Enable Fast Session Transfer (FST)
#CONFIG_FST=y
# Experimental implementation of draft-harkins-owe-07.txt
#CONFIG_OWE=y
-# Device Provisioning Protocol (DPP)
-# This requires CONFIG_IEEE80211W=y to be enabled, too. (see
-# wpa_supplicant/README-DPP for details)
+# Device Provisioning Protocol (DPP) (also known as Wi-Fi Easy Connect)
#CONFIG_DPP=y
+# DPP version 2 support
+#CONFIG_DPP2=y
+# DPP version 3 support (experimental and still changing; do not enable for
+# production use)
+#CONFIG_DPP3=y
+
+# Wired equivalent privacy (WEP)
+# WEP is an obsolete cryptographic data confidentiality algorithm that is not
+# considered secure. It should not be used for anything anymore. The
+# functionality needed to use WEP is available in the current wpa_supplicant
+# release under this optional build parameter. This functionality is subject to
+# be completely removed in a future release.
+#CONFIG_WEP=y
+
+# Remove all TKIP functionality
+# TKIP is an old cryptographic data confidentiality algorithm that is not
+# considered secure. It should not be used anymore for anything else than a
+# backwards compatibility option as a group cipher when connecting to APs that
+# use WPA+WPA2 mixed mode. For now, the default wpa_supplicant build includes
+# support for this by default, but that functionality is subject to be removed
+# in the future.
+#CONFIG_NO_TKIP=y
+
+# Pre-Association Security Negotiation (PASN)
+# Experimental implementation based on IEEE P802.11z/D2.6 and the protocol
+# design is still subject to change. As such, this should not yet be enabled in
+# production use.
+#CONFIG_PASN=y
# uBus IPC/RPC System
# Services can connect to the bus and provide methods
# EAP-TLS
CONFIG_EAP_TLS=y
+# Enable EAP-TLSv1.3 support by default (currently disabled unless explicitly
+# enabled in network configuration)
+#CONFIG_EAP_TLSV1_3=y
# EAL-PEAP
CONFIG_EAP_PEAP=y
# Support VHT overrides (disable VHT, mask MCS rates, etc.)
CONFIG_VHT_OVERRIDES=y
+# Support HE overrides
+CONFIG_HE_OVERRIDES=y
+
# Development testing
#CONFIG_EAPOL_TEST=y
# Simultaneous Authentication of Equals (SAE), WPA3-Personal
#CONFIG_SAE=y
-# Disable scan result processing (ap_mode=1) to save code size by about 1 kB.
+# SAE Public Key, WPA3-Personal
+#CONFIG_SAE_PK=y
+
+# Disable scan result processing (ap_scan=1) to save code size by about 1 kB.
# This can be used if ap_scan=1 mode is never enabled.
#CONFIG_NO_SCAN_PROCESSING=y
# bridge interfaces (commit 'bridge: respect RFC2863 operational state')').
CONFIG_NO_LINUX_PACKET_SOCKET_WAR=y
-# IEEE 802.11w (management frame protection), also known as PMF
-# Driver support is also needed for IEEE 802.11w.
-CONFIG_IEEE80211W=y
-
# Support Operating Channel Validation
#CONFIG_OCV=y
#PLATFORMSDKLIB="/opt/Program Files/Microsoft Platform SDK/Lib"
# Add support for new DBus control interface
-# (fi.w1.hostap.wpa_supplicant1)
+# (fi.w1.wpa_supplicant1)
#CONFIG_CTRL_IFACE_DBUS_NEW=y
# Add introspection support for new DBus control interface
# Requires glibc 2.25 to build, falls back to /dev/random if unavailable.
CONFIG_GETRANDOM=y
-# IEEE 802.11n (High Throughput) support (mainly for AP mode)
-#CONFIG_IEEE80211N=y
-
# IEEE 802.11ac (Very High Throughput) support (mainly for AP mode)
-# (depends on CONFIG_IEEE80211N)
#CONFIG_IEEE80211AC=y
+# IEEE 802.11ax HE support (mainly for AP mode)
+#CONFIG_IEEE80211AX=y
+
+# IEEE 802.11be EHT support (mainly for AP mode)
+# CONFIG_IEEE80211AX is mandatory for setting CONFIG_IEEE80211BE.
+# Note: This is experimental and work in progress. The definitions are still
+# subject to change and this should not be expected to interoperate with the
+# final IEEE 802.11be version.
+#CONFIG_IEEE80211BE=y
+
# Wireless Network Management (IEEE Std 802.11v-2011)
# Note: This is experimental and not complete implementation.
#CONFIG_WNM=y
#
# External password backend for testing purposes (developer use)
#CONFIG_EXT_PASSWORD_TEST=y
+# File-based backend to read passwords from an external file.
+#CONFIG_EXT_PASSWORD_FILE=y
# Enable Fast Session Transfer (FST)
#CONFIG_FST=y
# Experimental implementation of draft-harkins-owe-07.txt
#CONFIG_OWE=y
-# Device Provisioning Protocol (DPP)
-# This requires CONFIG_IEEE80211W=y to be enabled, too. (see
-# wpa_supplicant/README-DPP for details)
+# Device Provisioning Protocol (DPP) (also known as Wi-Fi Easy Connect)
#CONFIG_DPP=y
+# DPP version 2 support
+#CONFIG_DPP2=y
+# DPP version 3 support (experimental and still changing; do not enable for
+# production use)
+#CONFIG_DPP3=y
+
+# Wired equivalent privacy (WEP)
+# WEP is an obsolete cryptographic data confidentiality algorithm that is not
+# considered secure. It should not be used for anything anymore. The
+# functionality needed to use WEP is available in the current wpa_supplicant
+# release under this optional build parameter. This functionality is subject to
+# be completely removed in a future release.
+#CONFIG_WEP=y
+
+# Remove all TKIP functionality
+# TKIP is an old cryptographic data confidentiality algorithm that is not
+# considered secure. It should not be used anymore for anything else than a
+# backwards compatibility option as a group cipher when connecting to APs that
+# use WPA+WPA2 mixed mode. For now, the default wpa_supplicant build includes
+# support for this by default, but that functionality is subject to be removed
+# in the future.
+#CONFIG_NO_TKIP=y
+
+# Pre-Association Security Negotiation (PASN)
+# Experimental implementation based on IEEE P802.11z/D2.6 and the protocol
+# design is still subject to change. As such, this should not yet be enabled in
+# production use.
+#CONFIG_PASN=y
# uBus IPC/RPC System
# Services can connect to the bus and provide methods
projects / openwrt / staging / xback.git / commitdiff