phy-mode is already set to rgmii for eth0 and sgmii for eth1 in
qca955x.dtsi, no need to do that again in the device DTS files.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
pll-data = <0x17000000 0x101 0x1313>;
phy-handle = <&phy1>;
- phy-mode = "sgmii";
qca955x-sgmii-fixup;
mtd-mac-address = <&art 0x6>;
};
status = "okay";
phy-handle = <&phy0>;
- phy-mode = "rgmii";
pll-data = <0x56000000 0x00000101 0x00001616>;
fixed-link {
status = "okay";
phy-mask = <0>;
- phy-mode = "sgmii";
pll-data = <0x03000101 0x00000101 0x00001616>;
fixed-link {
pll-data = <0x9a000000 0x80000101 0x80001313>;
phy-handle = <&phy5>;
- phy-mode = "rgmii";
gmac-config {
device = <&gmac>;
ð1 {
status = "okay";
- phy-mode = "sgmii";
pll-data = <0x03000101 0x00000101 0x00001616>;
mtd-mac-address = <&art 0x6>;
pll-data = <0x82000101 0x80000101 0x80001313>;
phy-handle = <&phy4>;
- phy-mode = "rgmii";
};
ð1 {
pll-data = <0x03000101 0x80000101 0x80001313>;
phy-handle = <&phy1>;
- phy-mode = "sgmii";
};