serial: 8250_dma: Provide default slave configuration parameters

Some slave channel parameters will be always the same. For
example, direction for the Rx channel will always be
DMA_DEV_TO_MEM and DMA_MEM_TO_DEV for Tx channel.

Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/drivers/tty/serial/8250/8250_dma.c b/drivers/tty/serial/8250/8250_dma.c
index fdb6139e8c1789c24364d0235edc7f6e58074238..7046769608d403501158a044fd109203f0e0531f 100644 (file)
--- a/drivers/tty/serial/8250/8250_dma.c
+++ b/drivers/tty/serial/8250/8250_dma.c
@@ -149,8 +149,14 @@ int serial8250_request_dma(struct uart_8250_port *p)
        struct uart_8250_dma    *dma = p->dma;
        dma_cap_mask_t          mask;
 
-       dma->rxconf.src_addr = p->port.mapbase + UART_RX;
-       dma->txconf.dst_addr = p->port.mapbase + UART_TX;
+       /* Default slave configuration parameters */
+       dma->rxconf.direction           = DMA_DEV_TO_MEM;
+       dma->rxconf.src_addr_width      = DMA_SLAVE_BUSWIDTH_1_BYTE;
+       dma->rxconf.src_addr            = p->port.mapbase + UART_RX;
+
+       dma->txconf.direction           = DMA_MEM_TO_DEV;
+       dma->txconf.dst_addr_width      = DMA_SLAVE_BUSWIDTH_1_BYTE;
+       dma->txconf.dst_addr            = p->port.mapbase + UART_TX;
 
        dma_cap_zero(mask);
        dma_cap_set(DMA_SLAVE, mask);