--- /dev/null
+/*
+ * linux/drivers/video/hecubafb.c -- FB driver for Hecuba controller
+ *
+ * Copyright (C) 2006, Jaya Kumar
+ * This work was sponsored by CIS(M) Sdn Bhd
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive for
+ * more details.
+ *
+ * Layout is based on skeletonfb.c by James Simmons and Geert Uytterhoeven.
+ * This work was possible because of apollo display code from E-Ink's website
+ * http://support.eink.com/community
+ * All information used to write this code is from public material made
+ * available by E-Ink on its support site. Some commands such as 0xA4
+ * were found by looping through cmd=0x00 thru 0xFF and supplying random
+ * values. There are other commands that the display is capable of,
+ * beyond the 5 used here but they are more complex.
+ *
+ * This driver is written to be used with the Hecuba display controller
+ * board, and tested with the EInk 800x600 display in 1 bit mode.
+ * The interface between Hecuba and the host is TTL based GPIO. The
+ * GPIO requirements are 8 writable data lines and 6 lines for control.
+ * Only 4 of the controls are actually used here but 6 for future use.
+ * The driver requires the IO addresses for data and control GPIO at
+ * load time. It is also possible to use this display with a standard
+ * PC parallel port.
+ *
+ * General notes:
+ * - User must set hecubafb_enable=1 to enable it
+ * - User must set dio_addr=0xIOADDR cio_addr=0xIOADDR c2io_addr=0xIOADDR
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/slab.h>
+#include <linux/vmalloc.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/fb.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/list.h>
+#include <asm/uaccess.h>
+
+/* Apollo controller specific defines */
+#define APOLLO_START_NEW_IMG 0xA0
+#define APOLLO_STOP_IMG_DATA 0xA1
+#define APOLLO_DISPLAY_IMG 0xA2
+#define APOLLO_ERASE_DISPLAY 0xA3
+#define APOLLO_INIT_DISPLAY 0xA4
+
+/* Hecuba interface specific defines */
+/* WUP is inverted, CD is inverted, DS is inverted */
+#define HCB_NWUP_BIT 0x01
+#define HCB_NDS_BIT 0x02
+#define HCB_RW_BIT 0x04
+#define HCB_NCD_BIT 0x08
+#define HCB_ACK_BIT 0x80
+
+/* Display specific information */
+#define DPY_W 600
+#define DPY_H 800
+
+struct hecubafb_par {
+ unsigned long dio_addr;
+ unsigned long cio_addr;
+ unsigned long c2io_addr;
+ unsigned char ctl;
+ struct fb_info *info;
+ unsigned int irq;
+};
+
+static struct fb_fix_screeninfo hecubafb_fix __devinitdata = {
+ .id = "hecubafb",
+ .type = FB_TYPE_PACKED_PIXELS,
+ .visual = FB_VISUAL_MONO01,
+ .xpanstep = 0,
+ .ypanstep = 0,
+ .ywrapstep = 0,
+ .accel = FB_ACCEL_NONE,
+};
+
+static struct fb_var_screeninfo hecubafb_var __devinitdata = {
+ .xres = DPY_W,
+ .yres = DPY_H,
+ .xres_virtual = DPY_W,
+ .yres_virtual = DPY_H,
+ .bits_per_pixel = 1,
+ .nonstd = 1,
+};
+
+static unsigned long dio_addr;
+static unsigned long cio_addr;
+static unsigned long c2io_addr;
+static unsigned long splashval;
+static unsigned int nosplash;
+static unsigned int hecubafb_enable;
+static unsigned int irq;
+
+static DECLARE_WAIT_QUEUE_HEAD(hecubafb_waitq);
+
+static void hcb_set_ctl(struct hecubafb_par *par)
+{
+ outb(par->ctl, par->cio_addr);
+}
+
+static unsigned char hcb_get_ctl(struct hecubafb_par *par)
+{
+ return inb(par->c2io_addr);
+}
+
+static void hcb_set_data(struct hecubafb_par *par, unsigned char value)
+{
+ outb(value, par->dio_addr);
+}
+
+static int __devinit apollo_init_control(struct hecubafb_par *par)
+{
+ unsigned char ctl;
+ /* for init, we want the following setup to be set:
+ WUP = lo
+ ACK = hi
+ DS = hi
+ RW = hi
+ CD = lo
+ */
+
+ /* write WUP to lo, DS to hi, RW to hi, CD to lo */
+ par->ctl = HCB_NWUP_BIT | HCB_RW_BIT | HCB_NCD_BIT ;
+ par->ctl &= ~HCB_NDS_BIT;
+ hcb_set_ctl(par);
+
+ /* check ACK is not lo */
+ ctl = hcb_get_ctl(par);
+ if ((ctl & HCB_ACK_BIT)) {
+ printk(KERN_ERR "Fail because ACK is already low\n");
+ return -ENXIO;
+ }
+
+ return 0;
+}
+
+void hcb_wait_for_ack(struct hecubafb_par *par)
+{
+
+ int timeout;
+ unsigned char ctl;
+
+ timeout=500;
+ do {
+ ctl = hcb_get_ctl(par);
+ if ((ctl & HCB_ACK_BIT))
+ return;
+ udelay(1);
+ } while (timeout--);
+ printk(KERN_ERR "timed out waiting for ack\n");
+}
+
+void hcb_wait_for_ack_clear(struct hecubafb_par *par)
+{
+
+ int timeout;
+ unsigned char ctl;
+
+ timeout=500;
+ do {
+ ctl = hcb_get_ctl(par);
+ if (!(ctl & HCB_ACK_BIT))
+ return;
+ udelay(1);
+ } while (timeout--);
+ printk(KERN_ERR "timed out waiting for clear\n");
+}
+
+void apollo_send_data(struct hecubafb_par *par, unsigned char data)
+{
+ /* set data */
+ hcb_set_data(par, data);
+
+ /* set DS low */
+ par->ctl |= HCB_NDS_BIT;
+ hcb_set_ctl(par);
+
+ hcb_wait_for_ack(par);
+
+ /* set DS hi */
+ par->ctl &= ~(HCB_NDS_BIT);
+ hcb_set_ctl(par);
+
+ hcb_wait_for_ack_clear(par);
+}
+
+void apollo_send_command(struct hecubafb_par *par, unsigned char data)
+{
+ /* command so set CD to high */
+ par->ctl &= ~(HCB_NCD_BIT);
+ hcb_set_ctl(par);
+
+ /* actually strobe with command */
+ apollo_send_data(par, data);
+
+ /* clear CD back to low */
+ par->ctl |= (HCB_NCD_BIT);
+ hcb_set_ctl(par);
+}
+
+/* main hecubafb functions */
+
+static void hecubafb_dpy_update(struct hecubafb_par *par)
+{
+ int i;
+ unsigned char *buf = par->info->screen_base;
+
+ apollo_send_command(par, 0xA0);
+
+ for (i=0; i < (DPY_W*DPY_H/8); i++) {
+ apollo_send_data(par, *(buf++));
+ }
+
+ apollo_send_command(par, 0xA1);
+ apollo_send_command(par, 0xA2);
+}
+
+/* this is called back from the deferred io workqueue */
+static void hecubafb_dpy_deferred_io(struct fb_info *info,
+ struct list_head *pagelist)
+{
+ hecubafb_dpy_update(info->par);
+}
+
+static void hecubafb_fillrect(struct fb_info *info,
+ const struct fb_fillrect *rect)
+{
+ struct hecubafb_par *par = info->par;
+
+ cfb_fillrect(info, rect);
+
+ hecubafb_dpy_update(par);
+}
+
+static void hecubafb_copyarea(struct fb_info *info,
+ const struct fb_copyarea *area)
+{
+ struct hecubafb_par *par = info->par;
+
+ cfb_copyarea(info, area);
+
+ hecubafb_dpy_update(par);
+}
+
+static void hecubafb_imageblit(struct fb_info *info,
+ const struct fb_image *image)
+{
+ struct hecubafb_par *par = info->par;
+
+ cfb_imageblit(info, image);
+
+ hecubafb_dpy_update(par);
+}
+
+/*
+ * this is the slow path from userspace. they can seek and write to
+ * the fb. it's inefficient to do anything less than a full screen draw
+ */
+static ssize_t hecubafb_write(struct file *file, const char __user *buf,
+ size_t count, loff_t *ppos)
+{
+ struct inode *inode;
+ int fbidx;
+ struct fb_info *info;
+ unsigned long p;
+ int err=-EINVAL;
+ struct hecubafb_par *par;
+ unsigned int xres;
+ unsigned int fbmemlength;
+
+ p = *ppos;
+ inode = file->f_dentry->d_inode;
+ fbidx = iminor(inode);
+ info = registered_fb[fbidx];
+
+ if (!info || !info->screen_base)
+ return -ENODEV;
+
+ par = info->par;
+ xres = info->var.xres;
+ fbmemlength = (xres * info->var.yres)/8;
+
+ if (p > fbmemlength)
+ return -ENOSPC;
+
+ err = 0;
+ if ((count + p) > fbmemlength) {
+ count = fbmemlength - p;
+ err = -ENOSPC;
+ }
+
+ if (count) {
+ char *base_addr;
+
+ base_addr = info->screen_base;
+ count -= copy_from_user(base_addr + p, buf, count);
+ *ppos += count;
+ err = -EFAULT;
+ }
+
+ hecubafb_dpy_update(par);
+
+ if (count)
+ return count;
+
+ return err;
+}
+
+static struct fb_ops hecubafb_ops = {
+ .owner = THIS_MODULE,
+ .fb_write = hecubafb_write,
+ .fb_fillrect = hecubafb_fillrect,
+ .fb_copyarea = hecubafb_copyarea,
+ .fb_imageblit = hecubafb_imageblit,
+};
+
+static struct fb_deferred_io hecubafb_defio = {
+ .delay = HZ,
+ .deferred_io = hecubafb_dpy_deferred_io,
+};
+
+static int __devinit hecubafb_probe(struct platform_device *dev)
+{
+ struct fb_info *info;
+ int retval = -ENOMEM;
+ int videomemorysize;
+ unsigned char *videomemory;
+ struct hecubafb_par *par;
+
+ videomemorysize = (DPY_W*DPY_H)/8;
+
+ if (!(videomemory = vmalloc(videomemorysize)))
+ return retval;
+
+ memset(videomemory, 0, videomemorysize);
+
+ info = framebuffer_alloc(sizeof(struct hecubafb_par), &dev->dev);
+ if (!info)
+ goto err;
+
+ info->screen_base = (char __iomem *) videomemory;
+ info->fbops = &hecubafb_ops;
+
+ info->var = hecubafb_var;
+ info->fix = hecubafb_fix;
+ info->fix.smem_len = videomemorysize;
+ par = info->par;
+ par->info = info;
+
+ if (!dio_addr || !cio_addr || !c2io_addr) {
+ printk(KERN_WARNING "no IO addresses supplied\n");
+ goto err1;
+ }
+ par->dio_addr = dio_addr;
+ par->cio_addr = cio_addr;
+ par->c2io_addr = c2io_addr;
+ info->flags = FBINFO_FLAG_DEFAULT;
+
+ info->fbdefio = &hecubafb_defio;
+ fb_deferred_io_init(info);
+
+ retval = register_framebuffer(info);
+ if (retval < 0)
+ goto err1;
+ platform_set_drvdata(dev, info);
+
+ printk(KERN_INFO
+ "fb%d: Hecuba frame buffer device, using %dK of video memory\n",
+ info->node, videomemorysize >> 10);
+
+ /* this inits the dpy */
+ apollo_init_control(par);
+
+ apollo_send_command(par, APOLLO_INIT_DISPLAY);
+ apollo_send_data(par, 0x81);
+
+ /* have to wait while display resets */
+ udelay(1000);
+
+ /* if we were told to splash the screen, we just clear it */
+ if (!nosplash) {
+ apollo_send_command(par, APOLLO_ERASE_DISPLAY);
+ apollo_send_data(par, splashval);
+ }
+
+ return 0;
+err1:
+ framebuffer_release(info);
+err:
+ vfree(videomemory);
+ return retval;
+}
+
+static int __devexit hecubafb_remove(struct platform_device *dev)
+{
+ struct fb_info *info = platform_get_drvdata(dev);
+
+ if (info) {
+ fb_deferred_io_cleanup(info);
+ unregister_framebuffer(info);
+ vfree(info->screen_base);
+ framebuffer_release(info);
+ }
+ return 0;
+}
+
+static struct platform_driver hecubafb_driver = {
+ .probe = hecubafb_probe,
+ .remove = hecubafb_remove,
+ .driver = {
+ .name = "hecubafb",
+ },
+};
+
+static struct platform_device *hecubafb_device;
+
+static int __init hecubafb_init(void)
+{
+ int ret;
+
+ if (!hecubafb_enable) {
+ printk(KERN_ERR "Use hecubafb_enable to enable the device\n");
+ return -ENXIO;
+ }
+
+ ret = platform_driver_register(&hecubafb_driver);
+ if (!ret) {
+ hecubafb_device = platform_device_alloc("hecubafb", 0);
+ if (hecubafb_device)
+ ret = platform_device_add(hecubafb_device);
+ else
+ ret = -ENOMEM;
+
+ if (ret) {
+ platform_device_put(hecubafb_device);
+ platform_driver_unregister(&hecubafb_driver);
+ }
+ }
+ return ret;
+
+}
+
+static void __exit hecubafb_exit(void)
+{
+ platform_device_unregister(hecubafb_device);
+ platform_driver_unregister(&hecubafb_driver);
+}
+
+module_param(nosplash, uint, 0);
+MODULE_PARM_DESC(nosplash, "Disable doing the splash screen");
+module_param(hecubafb_enable, uint, 0);
+MODULE_PARM_DESC(hecubafb_enable, "Enable communication with Hecuba board");
+module_param(dio_addr, ulong, 0);
+MODULE_PARM_DESC(dio_addr, "IO address for data, eg: 0x480");
+module_param(cio_addr, ulong, 0);
+MODULE_PARM_DESC(cio_addr, "IO address for control, eg: 0x400");
+module_param(c2io_addr, ulong, 0);
+MODULE_PARM_DESC(c2io_addr, "IO address for secondary control, eg: 0x408");
+module_param(splashval, ulong, 0);
+MODULE_PARM_DESC(splashval, "Splash pattern: 0x00 is black, 0x01 is white");
+module_param(irq, uint, 0);
+MODULE_PARM_DESC(irq, "IRQ for the Hecuba board");
+
+module_init(hecubafb_init);
+module_exit(hecubafb_exit);
+
+MODULE_DESCRIPTION("fbdev driver for Hecuba board");
+MODULE_AUTHOR("Jaya Kumar");
+MODULE_LICENSE("GPL");
projects / openwrt / staging / blogic.git / commitdiff