This is also shared with newer CODECs.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
/* Use automatic clock configuration */
snd_soc_update_bits(codec, WM8993_CLOCKING_4, WM8993_SR_MODE, 0);
- if (!wm8993->pdata.lineout1_diff)
- snd_soc_update_bits(codec, WM8993_LINE_MIXER1,
- WM8993_LINEOUT1_MODE,
- WM8993_LINEOUT1_MODE);
- if (!wm8993->pdata.lineout2_diff)
- snd_soc_update_bits(codec, WM8993_LINE_MIXER2,
- WM8993_LINEOUT2_MODE,
- WM8993_LINEOUT2_MODE);
-
- if (wm8993->pdata.lineout1fb)
- snd_soc_update_bits(codec, WM8993_ADDITIONAL_CONTROL,
- WM8993_LINEOUT1_FB, WM8993_LINEOUT1_FB);
-
- if (wm8993->pdata.lineout2fb)
- snd_soc_update_bits(codec, WM8993_ADDITIONAL_CONTROL,
- WM8993_LINEOUT2_FB, WM8993_LINEOUT2_FB);
-
- /* Apply the microphone bias/detection configuration - the
- * platform data is directly applicable to the register. */
- snd_soc_update_bits(codec, WM8993_MICBIAS,
- WM8993_JD_SCTHR_MASK | WM8993_JD_THR_MASK |
- WM8993_MICB1_LVL | WM8993_MICB2_LVL,
- wm8993->pdata.jd_scthr << WM8993_JD_SCTHR_SHIFT |
- wm8993->pdata.jd_thr << WM8993_JD_THR_SHIFT |
- wm8993->pdata.micbias1_lvl |
- wm8993->pdata.micbias1_lvl << 1);
-
+ wm_hubs_handle_analogue_pdata(codec, wm8993->pdata.lineout1_diff,
+ wm8993->pdata.lineout2_diff,
+ wm8993->pdata.lineout1fb,
+ wm8993->pdata.lineout2fb,
+ wm8993->pdata.jd_scthr,
+ wm8993->pdata.jd_thr,
+ wm8993->pdata.micbias1_lvl,
+ wm8993->pdata.micbias2_lvl);
+
ret = wm8993_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
if (ret != 0)
goto err;
}
EXPORT_SYMBOL_GPL(wm_hubs_add_analogue_routes);
+int wm_hubs_handle_analogue_pdata(struct snd_soc_codec *codec,
+ int lineout1_diff, int lineout2_diff,
+ int lineout1fb, int lineout2fb,
+ int jd_scthr, int jd_thr, int micbias1_lvl,
+ int micbias2_lvl)
+{
+ if (!lineout1_diff)
+ snd_soc_update_bits(codec, WM8993_LINE_MIXER1,
+ WM8993_LINEOUT1_MODE,
+ WM8993_LINEOUT1_MODE);
+ if (!lineout2_diff)
+ snd_soc_update_bits(codec, WM8993_LINE_MIXER2,
+ WM8993_LINEOUT2_MODE,
+ WM8993_LINEOUT2_MODE);
+
+ if (lineout1fb)
+ snd_soc_update_bits(codec, WM8993_ADDITIONAL_CONTROL,
+ WM8993_LINEOUT1_FB, WM8993_LINEOUT1_FB);
+
+ if (lineout2fb)
+ snd_soc_update_bits(codec, WM8993_ADDITIONAL_CONTROL,
+ WM8993_LINEOUT2_FB, WM8993_LINEOUT2_FB);
+
+ snd_soc_update_bits(codec, WM8993_MICBIAS,
+ WM8993_JD_SCTHR_MASK | WM8993_JD_THR_MASK |
+ WM8993_MICB1_LVL | WM8993_MICB2_LVL,
+ jd_scthr << WM8993_JD_SCTHR_SHIFT |
+ jd_thr << WM8993_JD_THR_SHIFT |
+ micbias1_lvl |
+ micbias2_lvl << WM8993_MICB2_LVL_SHIFT);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(wm_hubs_handle_analogue_pdata);
+
MODULE_DESCRIPTION("Shared support for Wolfson hubs products");
MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
MODULE_LICENSE("GPL");
extern int wm_hubs_add_analogue_controls(struct snd_soc_codec *);
extern int wm_hubs_add_analogue_routes(struct snd_soc_codec *, int, int);
+extern int wm_hubs_handle_analogue_pdata(struct snd_soc_codec *,
+ int lineout1_diff, int lineout2_diff,
+ int lineout1fb, int lineout2fb,
+ int jd_scthr, int jd_thr,
+ int micbias1_lvl, int micbias2_lvl);
#endif