generic: ar8216: simplify phy features setup

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35518

diff --git a/target/linux/generic/files/drivers/net/phy/ar8216.c b/target/linux/generic/files/drivers/net/phy/ar8216.c
index d980e24ee1b0bab579523a822c78fcadb4a07d85..e6a460734fe207f16c1e780ebbc986a3845c99e8 100644 (file)
--- a/target/linux/generic/files/drivers/net/phy/ar8216.c
+++ b/target/linux/generic/files/drivers/net/phy/ar8216.c
@@ -1791,12 +1791,13 @@ ar8216_config_init(struct phy_device *pdev)
        if (ret)
                goto err_free_priv;
 
-       if (pdev->addr != 0) {
-               if (ar8xxx_has_gige(priv)) {
-                       pdev->supported |= SUPPORTED_1000baseT_Full;
-                       pdev->advertising |= ADVERTISED_1000baseT_Full;
-               }
+       if (ar8xxx_has_gige(priv))
+               pdev->supported = SUPPORTED_1000baseT_Full;
+       else
+               pdev->supported = SUPPORTED_100baseT_Full;
+       pdev->advertising = pdev->supported;
 
+       if (pdev->addr != 0) {
                if (chip_is_ar8316(priv)) {
                        /* check if we're attaching to the switch twice */
                        pdev = pdev->bus->phy_map[0];
@@ -1827,12 +1828,6 @@ ar8216_config_init(struct phy_device *pdev)
                return 0;
        }
 
-       if (ar8xxx_has_gige(priv))
-               pdev->supported = SUPPORTED_1000baseT_Full;
-       else
-               pdev->supported = SUPPORTED_100baseT_Full;
-       pdev->advertising = pdev->supported;
-
        mutex_init(&priv->reg_mutex);
 
        pdev->priv = priv;