broadcom-diag: add support for some new devices

There is still no Ethernet driver for these devices in trunk.

Thanks George Kashperko for the patch.

SVN-Revision: 29735

diff --git a/package/broadcom-diag/src/diag.c b/package/broadcom-diag/src/diag.c
index 00a72e90763f13dd766b09ca624e09fa3672760e..e60b66c91b317e6037156d602bf5f90f0033912c 100644 (file)
--- a/package/broadcom-diag/src/diag.c
+++ b/package/broadcom-diag/src/diag.c
@@ -59,6 +59,8 @@ enum {
        WRT600N,
        WRT600NV11,
        WRT610N,
+       WRT610NV2,
+       E3000V1,
 
        /* ASUS */
        WLHDD,
@@ -74,6 +76,7 @@ enum {
        WL520GU,
        ASUS_4702,
        WL700GE,
+       RTN16,
 
        /* Buffalo */
        WBR2_G54,
@@ -107,6 +110,7 @@ enum {
 
        /* Belkin */
        BELKIN_UNKNOWN,
+       BELKIN_F7D4301,
 
        /* Netgear */
        WGT634U,
@@ -364,6 +368,34 @@ static struct platform_t __initdata platforms[] = {
                        { .name = "ses_blue",   .gpio = 1 << 9,  .polarity = REVERSE }, // WiFi protected setup LED blue
                },
        },
+       [WRT610NV2] = {
+               .name           = "Linksys WRT610N V2",
+               .buttons        = {
+                       { .name = "reset",      .gpio = 1 << 6 },
+                       { .name = "ses",        .gpio = 1 << 4 },
+               },
+               .leds           = {
+                       { .name = "power",      .gpio = 1 << 5, .polarity = NORMAL },   // Power LED
+                       { .name = "usb",        .gpio = 1 << 7, .polarity = NORMAL },   // USB LED
+                       { .name = "ses_amber",  .gpio = 1 << 0, .polarity = REVERSE },  // WiFi protected setup LED amber
+                       { .name = "ses_blue",   .gpio = 1 << 3, .polarity = REVERSE },  // WiFi protected setup LED blue
+                       { .name = "wlan",       .gpio = 1 << 1, .polarity = NORMAL },   // Wireless LED
+               },
+       },
+       [E3000V1] = {
+               .name           = "Linksys E3000 V1",
+               .buttons        = {
+                       { .name = "reset",      .gpio = 1 << 6 },
+                       { .name = "ses",        .gpio = 1 << 4 },
+               },
+               .leds           = {
+                       { .name = "power",      .gpio = 1 << 5, .polarity = NORMAL },   // Power LED
+                       { .name = "usb",        .gpio = 1 << 7, .polarity = NORMAL },   // USB LED
+                       { .name = "ses_amber",  .gpio = 1 << 0, .polarity = REVERSE },  // WiFi protected setup LED amber
+                       { .name = "ses_blue",   .gpio = 1 << 3, .polarity = REVERSE },  // WiFi protected setup LED blue
+                       { .name = "wlan",       .gpio = 1 << 1, .polarity = NORMAL },   // Wireless LED
+               },
+       },
        /* Asus */
        [WLHDD] = {
                .name           = "ASUS WL-HDD",
@@ -503,6 +535,17 @@ static struct platform_t __initdata platforms[] = {
                },
                .platform_init = bcm4780_init,
        },
+       [RTN16] = {
+               .name           = "ASUS RT-N16",
+               .buttons        = {
+                       { .name = "reset",      .gpio = 1 << 8 },
+                       { .name = "ses",        .gpio = 1 << 5 },
+               },
+               .leds           = {
+                       { .name = "power",      .gpio = 1 << 1, .polarity = REVERSE },
+                       { .name = "wlan",       .gpio = 1 << 7, .polarity = NORMAL },
+               },
+       },
        /* Buffalo */
        [WHR_G54S] = {
                .name           = "Buffalo WHR-G54S",
@@ -749,6 +792,19 @@ static struct platform_t __initdata platforms[] = {
                        { .name = "connected",  .gpio = 1 << 0, .polarity = NORMAL },
                },
        },
+       [BELKIN_F7D4301] = {
+               .name           = "Belkin PlayMax F7D4301",
+               .buttons        = {
+                       { .name = "reset",      .gpio = 1 << 6 },
+                       { .name = "wps",        .gpio = 1 << 8 },
+               },
+               .leds           = {
+                       { .name = "power",      .gpio = 1 << 11, .polarity = REVERSE },
+                       { .name = "wlan",       .gpio = 1 << 13, .polarity = REVERSE },
+                       { .name = "led0",       .gpio = 1 << 14, .polarity = REVERSE },
+                       { .name = "led1",       .gpio = 1 << 15, .polarity = REVERSE },
+               },
+       },
        /* Netgear */
        [WGT634U] = {
                .name           = "Netgear WGT634U",
@@ -962,6 +1018,10 @@ static struct platform_t __init *platform_detect(void)
                        return &platforms[WL520GU];
                if (startswith(buf,"WL330GE-")) /* WL330GE-* */
                        return &platforms[WL330GE];
+               if (startswith(buf,"RT-N16-")) /* RT-N16-* */
+                       return &platforms[RTN16];
+               if (startswith(buf,"F7D4301")) /* F7D4301* */
+                       return &platforms[BELKIN_F7D4301];
        }
 
        /* Based on "ModelId" */
@@ -1011,6 +1071,19 @@ static struct platform_t __init *platform_detect(void)
                        return &platforms[WRT600N];
        }
 
+       /*
+        * Normally, these would go inside the "CFE based - newer hardware" block below; however, during early init, the
+        * "pmon_ver" variable is not available on the E3000v1 (and probably the WRT610Nv2 also).  Until this is figured out,
+        * these will need to remain here in order for platform detection to work.
+        */
+       if (!strcmp(boardnum, "42")) { /* Linksys */
+               if (!strcmp(boardtype, "0x04cf") && !strcmp(getvar("boot_hw_model"), "E300") && !strcmp(getvar("boot_hw_ver"), "1.0"))
+                       return &platforms[E3000V1];
+
+               if (!strcmp(boardtype, "0x04cf") && !strcmp(getvar("boot_hw_model"), "WRT610N") && !strcmp(getvar("boot_hw_ver"), "2.0"))
+                       return &platforms[WRT610NV2];
+       }
+
        if (startswith(getvar("pmon_ver"), "CFE")) {
                /* CFE based - newer hardware */
                if (!strcmp(boardnum, "42")) { /* Linksys */