Also drop the default network configuration of the TL-WR1043ND, because
the RTL8366RB switch is not yet supported by the rtl8366-smi driver.
SVN-Revision: 19217
config interface wan
option ifname eth1
option proto dhcp
+
+config switch
+ option name rtl8366-smi
+ option reset 1
+ option enable_vlan 1
+
+config switch_vlan
+ option device rtl8366-smi
+ option vlan 0
+ option ports "0 1 2 3 5"
+++ /dev/null
-config interface loopback
- option ifname lo
- option proto static
- option ipaddr 127.0.0.1
- option netmask 255.0.0.0
-
-config interface lan
- option ifname eth0
- option type bridge
- option proto static
- option ipaddr 192.168.1.1
- option netmask 255.255.255.0
-
-config interface wan
- option ifname eth1
- option proto dhcp
-
-config switch
- option name rtl8366-smi
- option reset 1
- option enable_vlan 1
-
-config switch_vlan
- option device rtl8366-smi
- option vlan 0
- option ports "0 1 2 3 5"
config interface wan
option ifname eth1
option proto dhcp
+
+config switch
+ option name rtl8366-smi
+ option reset 1
+ option enable_vlan 1
+
+config switch_vlan
+ option device rtl8366-smi
+ option vlan 0
+ option ports "0 1 2 3 5"