--- /dev/null
+/dts-v1/;
+
+/include/ "danube.dtsi"
+
+/ {
+ chosen {
+ bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
+ };
+
+ memory@0 {
+ reg = <0x0 0x2000000>;
+ };
+
+ fpi@10000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ localbus@0 {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges = <0 0 0x0 0x3ffffff /* addrsel0 */
+ 1 0 0x4000000 0x4000010>; /* addsel1 */
+ compatible = "lantiq,localbus", "simple-bus";
+
+ nor-boot@0 {
+ compatible = "lantiq,nor";
+ bank-width = <2>;
+ reg = <0 0x0 0x2000000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "uboot";
+ reg = <0x00000 0x10000>; /* 64 KB */
+ };
+
+ partition@10000 {
+ label = "uboot_env";
+ reg = <0x10000 0x10000>; /* 64 KB */
+ };
+
+ partition@20000 {
+ label = "linux";
+ reg = <0x20000 0x3c0000>;
+ };
+
+ partition@400000 {
+ label = "boardconfig";
+ reg = <0x3f0000 0x10000>;
+ };
+ };
+ };
+
+ gpio: pinmux@E100B10 {
+ compatible = "lantiq,pinctrl-xway";
+ pinctrl-names = "default";
+ pinctrl-0 = <&state_default>;
+
+ #gpio-cells = <2>;
+ gpio-controller;
+ reg = <0xE100B10 0xA0>;
+
+ state_default: pinmux {
+ exin {
+ lantiq,groups = "exin1";
+ lantiq,function = "exin";
+ };
+ pci {
+ lantiq,groups = "gnt1", "req1";
+ lantiq,function = "pci";
+ };
+ };
+ };
+
+ adsl: dsl@E116000 {
+ compatible = "lantiq,dsl-xway";
+ interrupt-parent = <&icu0>;
+ interrupts = <63 96>;
+ };
+ etop@E180000 {
+ compatible = "lantiq,etop-xway";
+ reg = <0xE180000 0x40000>;
+ interrupt-parent = <&icu0>;
+ interrupts = <73 78>;
+ phy-mode = "rmii";
+ mac-address = [ 00 11 22 33 44 55 ];
+ };
+
+ pci@E105400 {
+ lantiq,bus-clock = <33333333>;
+ interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+ interrupt-map = <
+ 0x7000 0 0 1 &icu0 30 1 // slot 14, irq 29
+ >;
+ gpios-reset = <&gpio 21 0>;
+ req-mask = <0x1>; /* GNT1 */
+ };
+
+ };
+
+ sflash@E100800 {
+ compatible = "lantiq,sflash_at45";
+ reg = <0xE100800 0x100>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "uboot";
+ reg = <0x00000 0x10000>;
+ };
+
+ partition@10000 {
+ label = "uboot_env";
+ reg = <0x10000 0x10000>;
+ };
+
+ partition@20000 {
+ label = "linux";
+ reg = <0x20000 0x1d0000>;
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys1";
+ reset {
+ label = "Reset";
+ gpios = <&gpio 29 1>;
+ gpio-key,wakeup;
+ linux,code = <0x100>;
+ };
+ };
+ gpio-leds {
+ compatible = "gpio-leds";
+ festnetz {
+ label = "Festnetz";
+ gpios = <&gpio 4 1>;
+ default-state = "on";
+ };
+ internet {
+ label = "Internet";
+ gpios = <&gpio 5 1>;
+ default-state = "on";
+ };
+ wlan {
+ label = "WLan";
+ gpios = <&gpio 6 1>;
+ default-state = "on";
+ };
+ online {
+ label = "Online";
+ gpios = <&gpio 8 1>;
+ default-state = "on";
+ };
+ dsl {
+ label = "DSL";
+ gpios = <&gpio 9 1>;
+ default-state = "on";
+ };
+ };
+};
--- /dev/null
+/dts-v1/;
+
+/include/ "amazonse.dtsi"
+
+/ {
+ chosen {
+ bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
+ };
+
+ memory@0 {
+ reg = <0x0 0x1000000>;
+ };
+
+ fpi@10000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ gpio: pinmux@E100B10 {
+ compatible = "lantiq,pinctrl-ase";
+ pinctrl-names = "default";
+ pinctrl-0 = <&state_default>;
+
+ #gpio-cells = <2>;
+ gpio-controller;
+ reg = <0xE100B10 0xA0>;
+
+ state_default: pinmux {
+ spi {
+ lantiq,groups = "spi", "spi_cs1";
+ lantiq,function = "spi";
+ };
+ asc {
+ lantiq,groups = "asc";
+ lantiq,function = "asc";
+ };
+ exin {
+ lantiq,groups = "exin1", "exin2";
+ lantiq,function = "exin";
+ };
+ conf_in {
+ lantiq,pins = "io0", "io29"; /* nand rdy */
+ lantiq,pull = <2>;
+ };
+ };
+ };
+
+ adsl: dsl@E116000 {
+ compatible = "lantiq,dsl-xway";
+ interrupt-parent = <&icu0>;
+ interrupts = <63 96>;
+ };
+
+ etop@E180000 {
+ compatible = "lantiq,etop-xway";
+ reg = <0xE180000 0x40000>;
+ interrupt-parent = <&icu0>;
+ interrupts = <105 109>;
+ phy-mode = "ephy";
+ mac-address = [ 00 11 22 33 44 55 ];
+ };
+
+ spi@E100800 {
+ compatible = "lantiq,spi-xway";
+ reg = <0xE100800 0x100>;
+ interrupt-parent = <&icu0>;
+ interrupts = <24 25 26>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "s25fl129p0";
+ reg = <0 0>;
+ linux,modalias = "m25p80", "mx25l3205d";
+ spi-max-frequency = <5000000>;
+
+ partition@0 {
+ reg = <0x0 0x20000>;
+ label = "SPI (RO) U-Boot Image";
+ read-only;
+ };
+
+ partition@20000 {
+ reg = <0x20000 0x10000>;
+ label = "ENV_MAC";
+ read-only;
+ };
+
+ partition@30000 {
+ reg = <0x30000 0x10000>;
+ label = "DPF";
+ read-only;
+ };
+
+ partition@40000 {
+ reg = <0x40000 0x10000>;
+ label = "NVRAM";
+ read-only;
+ };
+
+ partition@500000 {
+ reg = <0x50000 0x003a0000>;
+ label = "kernel";
+ };
+ };
+ };
+ };
+
+ /* missing button on <&gpio 25 0> */
+/* gpio-keys {
+ compatible = "gpio-keys";
+ interrupt-parent = <&icu0>;
+ interrupts = <30 31>;
+ reset {
+ label = "Reset";
+ gpios = <&gpio 0 0>;
+ gpio-key,wakeup;
+ linux,code = <0x100>;
+ };
+ wps {
+ label = "WPS";
+ gpios = <&gpio 29 1>;
+ gpio-key,wakeup;
+ linux,code = <0x100>;
+ };
+ };
+*/
+ gpio-leds {
+ compatible = "gpio-leds";
+ festnetz {
+ label = "DSL";
+ gpios = <&gpio 1 1>;
+ default-state = "on";
+ };
+ internet1 {
+ label = "Internet1";
+ gpios = <&gpio 2 1>;
+ default-state = "on";
+ };
+ internet2 {
+ label = "Internet2";
+ gpios = <&gpio 3 1>;
+ default-state = "on";
+ };
+ wps {
+ label = "WPS";
+ gpios = <&gpio 4 1>;
+ default-state = "on";
+ };
+ power {
+ label = "power";
+ gpios = <&gpio 13 1>;
+ default-state = "on";
+ };
+ };
+};
--- /dev/null
+/dts-v1/;
+
+/include/ "danube.dtsi"
+
+/ {
+ chosen {
+ bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
+ };
+
+ memory@0 {
+ reg = <0x0 0x2000000>;
+ };
+
+ fpi@10000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ localbus@0 {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges = <0 0 0x0 0x3ffffff /* addrsel0 */
+ 1 0 0x4000000 0x4000010>; /* addsel1 */
+ compatible = "lantiq,localbus", "simple-bus";
+
+ nor-boot@0 {
+ compatible = "lantiq,nor";
+ bank-width = <2>;
+ reg = <0 0x0 0x2000000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "uboot";
+ reg = <0x00000 0x10000>; /* 64 KB */
+ };
+
+ partition@10000 {
+ label = "uboot_env";
+ reg = <0x10000 0x10000>; /* 64 KB */
+ };
+
+ partition@20000 {
+ label = "linux";
+ reg = <0x20000 0x3d0000>;
+ };
+
+ partition@400000 {
+ label = "rootfs";
+ reg = <0x400000 0x400000>;
+ };
+ };
+ };
+
+ gpio: pinmux@E100B10 {
+ compatible = "lantiq,pinctrl-xway";
+ pinctrl-names = "default";
+ pinctrl-0 = <&state_default>;
+
+ #gpio-cells = <2>;
+ gpio-controller;
+ reg = <0xE100B10 0xA0>;
+
+ state_default: pinmux {
+ stp {
+ lantiq,groups = "stp";
+ lantiq,function = "stp";
+ };
+ exin {
+ lantiq,groups = "exin1";
+ lantiq,function = "exin";
+ };
+ pci {
+ lantiq,groups = "gnt1";
+ lantiq,function = "pci";
+ };
+ conf_out {
+ lantiq,pins = "io4", "io5", "io6"; /* stp */
+ lantiq,open-drain;
+ lantiq,pull = <0>;
+ };
+ };
+ };
+
+ etop@E180000 {
+ compatible = "lantiq,etop-xway";
+ reg = <0xE180000 0x40000>;
+ interrupt-parent = <&icu0>;
+ interrupts = <73 78>;
+ phy-mode = "rmii";
+ mac-address = [ 00 11 22 33 44 55 ];
+ };
+
+ stp0: stp@E100BB0 {
+ #gpio-cells = <2>;
+ compatible = "lantiq,gpio-stp-xway";
+ gpio-controller;
+ reg = <0xE100BB0 0x40>;
+
+ lantiq,shadow = <0xfff>;
+ lantiq,groups = <0x3>;
+ };
+
+ pci@E105400 {
+ lantiq,bus-clock = <33333333>;
+ interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+ interrupt-map = <
+ 0x7000 0 0 1 &icu0 29 1 // slot 14, irq 29
+ >;
+ gpios-reset = <&gpio 21 0>;
+ req-mask = <0x1>; /* GNT1 */
+ };
+
+ };
+};
--- /dev/null
+/dts-v1/;
+
+
+/include/ "EASY80920.dtsi"
+
+/ {
+ fpi@10000000 {
+ localbus@0 {
+ ranges = <0 0 0x4000000 0x3ffffff>;
+ nand-parts@0 {
+ compatible = "gen_nand", "lantiq,nand-xway";
+ lantiq,cs = <1>;
+ bank-width = <2>;
+ reg = <0 0x0 0x2000000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "uboot";
+ reg = <0x00000 0x40000>;
+ };
+
+ partition@10000 {
+ label = "uboot_env";
+ reg = <0x40000 0x40000>;
+ };
+
+ partition@20000 {
+ label = "linux";
+ reg = <0x80000 0x3f80000>;
+ };
+ };
+ };
+ };
+};
--- /dev/null
+/dts-v1/;
+
+
+/include/ "EASY80920.dtsi"
+
+/ {
+ fpi@10000000 {
+ localbus@0 {
+ ranges = <0 0 0x0 0x3ffffff>;
+ nor-boot@0 {
+ compatible = "lantiq,nor";
+ bank-width = <2>;
+ reg = <0 0x0 0x2000000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "uboot";
+ reg = <0x00000 0x10000>;
+ };
+
+ partition@10000 {
+ label = "uboot_env";
+ reg = <0x10000 0x10000>;
+ };
+
+ partition@20000 {
+ label = "linux";
+ reg = <0x20000 0x7e0000>;
+ };
+ };
+ };
+ };
+};
--- /dev/null
+/include/ "vr9.dtsi"
+
+/ {
+ chosen {
+ bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
+ };
+
+ memory@0 {
+ reg = <0x0 0x4000000>;
+ };
+
+ fpi@10000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "lantiq,fpi", "simple-bus";
+ ranges = <0x0 0x10000000 0xEEFFFFF>;
+ reg = <0x10000000 0xEF00000>;
+
+ localbus@0 {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ compatible = "lantiq,localbus", "simple-bus";
+
+ };
+
+ sflash@E100800 {
+ compatible = "lantiq,sflash";
+ reg = <0xE100800 0x100>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "uboot";
+ reg = <0x00000 0x10000>;
+ };
+
+ partition@10000 {
+ label = "uboot_env";
+ reg = <0x10000 0x10000>;
+ };
+
+ partition@20000 {
+ label = "linux";
+ reg = <0x20000 0x1d0000>;
+ };
+ };
+
+ gpio: pinmux@E100B10 {
+ compatible = "lantiq,pinctrl-xr9";
+ pinctrl-names = "default";
+ pinctrl-0 = <&state_default>;
+
+ interrupt-parent = <&icu0>;
+ interrupts = <166 135 66 40 41 42 38>;
+
+ #gpio-cells = <2>;
+ gpio-controller;
+ reg = <0xE100B10 0xA0>;
+
+ state_default: pinmux {
+ stp {
+ lantiq,groups = "stp";
+ lantiq,function = "stp";
+ };
+ /*spi {
+ lantiq,groups = "spi", "spi_cs4";
+ lantiq,function = "spi";
+ };*/
+ nand {
+ lantiq,groups = "nand cle", "nand ale",
+ "nand rd", "nand rdy";
+ lantiq,function = "ebu";
+ };
+ mdio {
+ lantiq,groups = "mdio";
+ lantiq,function = "mdio";
+ };
+ pci {
+ lantiq,groups = "gnt1", "req1";
+ lantiq,function = "pci";
+ };
+ exin {
+ lantiq,groups = "exin3";
+ lantiq,function = "exin";
+ };
+ conf_out {
+ lantiq,pins = "io24", "io13", "io49", /* nand cle, ale and rd */
+ "io4", "io5", "io6", /* stp */
+ "io17", "io18", /* spi dout & clk */
+ "io21", /* pci-rst */
+ "io38"; /* pcie-rst */
+ lantiq,open-drain;
+ lantiq,pull = <0>;
+ };
+ conf_in {
+ lantiq,pins = "io39", /* exin3 */
+ "io48"; /* nand rdy */
+ lantiq,pull = <2>;
+ };
+ };
+ };
+
+ eth@0xE108000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "lantiq,xrx200-net";
+ reg = < 0xE108000 0x3000 /* switch */
+ 0xE10B100 0x70 /* mdio */
+ 0xE10B1D8 0x30 /* mii */
+ 0xE10B308 0x30 /* pmac */
+ >;
+ interrupt-parent = <&icu0>;
+ interrupts = <73 72>;
+
+ lan: interface@0 {
+ compatible = "lantiq,xrx200-pdi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ mac-address = [ 00 11 22 33 44 55 ];
+
+ ethernet@0 {
+ compatible = "lantiq,xrx200-pdi-port";
+ reg = <0>;
+ phy-mode = "rgmii";
+ phy-handle = <&phy0>;
+ };
+ ethernet@1 {
+ compatible = "lantiq,xrx200-pdi-port";
+ reg = <1>;
+ phy-mode = "rgmii";
+ phy-handle = <&phy1>;
+ };
+ ethernet@2 {
+ compatible = "lantiq,xrx200-pdi-port";
+ reg = <2>;
+ phy-mode = "gmii";
+ phy-handle = <&phy11>;
+ };
+ ethernet@4 {
+ compatible = "lantiq,xrx200-pdi-port";
+ reg = <4>;
+ phynmode0 = "gmii";
+ phy-handle = <&phy13>;
+ };
+ };
+
+ wan: interface@1 {
+ compatible = "lantiq,xrx200-pdi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ mac-address = [ 00 11 22 33 44 56 ];
+
+ ethernet@5 {
+ compatible = "lantiq,xrx200-pdi-port";
+ reg = <5>;
+ phy-mode = "rgmii";
+ phy-handle = <&phy5>;
+ };
+ };
+
+ mdio@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "lantiq,xrx200-mdio";
+ phy0: ethernet-phy@0 {
+ reg = <0x0>;
+ compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+ lantiq,c45-reg-init = <1 0 0 0>;
+ };
+ phy1: ethernet-phy@1 {
+ reg = <0x1>;
+ compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+ lantiq,c45-reg-init = <1 0 0 0>;
+ };
+ phy5: ethernet-phy@5 {
+ reg = <0x5>;
+ compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+ lantiq,c45-reg-init = <1 0 0 0>;
+ };
+ phy11: ethernet-phy@11 {
+ reg = <0x11>;
+ compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+ lantiq,c45-reg-init = <1 0 0 0>;
+ };
+ phy13: ethernet-phy@13 {
+ reg = <0x13>;
+ compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+ lantiq,c45-reg-init = <1 0 0 0>;
+ };
+ };
+ };
+
+ stp: stp@E100BB0 {
+ compatible = "lantiq,gpio-stp-xway";
+ reg = <0xE100BB0 0x40>;
+ #gpio-cells = <2>;
+ gpio-controller;
+
+ lantiq,shadow = <0xffff>;
+ lantiq,groups = <0x7>;
+ lantiq,dsl = <0x3>;
+ lantiq,phy1 = <0x7>;
+ lantiq,phy2 = <0x7>;
+ /* lantiq,rising; */
+ };
+
+ pci@E105400 {
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ compatible = "lantiq,pci-xway";
+ bus-range = <0x0 0x0>;
+ ranges = <0x2000000 0 0x8000000 0x8000000 0 0x2000000 /* pci memory */
+ 0x1000000 0 0x00000000 0xAE00000 0 0x200000>; /* io space */
+ reg = <0x7000000 0x8000 /* config space */
+ 0xE105400 0x400>; /* pci bridge */
+ lantiq,bus-clock = <33333333>;
+ /*lantiq,external-clock;*/
+ lantiq,delay-hi = <0>; /* 0ns delay */
+ lantiq,delay-lo = <0>; /* 0.0ns delay */
+ interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+ interrupt-map = <
+ 0x7000 0 0 1 &icu0 29 1 // slot 14, irq 29
+ >;
+ gpios-reset = <&gpio 21 0>;
+ req-mask = <0x1>; /* GNT1 */
+ };
+ };
+
+ ifxhcd {
+ compatible = "lantiq,ifxhcd";
+ interrupt-parent = <&icu0>;
+ interrupts = <62 91>;
+ };
+
+ gphy-xrx200 {
+ compatible = "lantiq,phy-xrx200";
+ firmware = "lantiq/vr9_phy11g_a2x.bin";
+ phys = [ 00 01 ];
+ };
+
+ gpio-keys-polled {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <100>;
+ reset {
+ label = "Reset";
+ gpios = <&gpio 7 0>;
+ linux,code = <0x100>;
+ };
+ paging {
+ label = "paging";
+ gpios = <&gpio 11 1>;
+ linux,code = <0x100>;
+ };
+ };
+
+/* gpio-keys {
+ compatible = "gpio-keys";
+ wps {
+ gpios = <&gpio 39 0>;
+ linux,code = <0x100>;
+ };
+ };*/
+
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ led0 {
+ label = "led0";
+ gpios = <&stp 9 0>;
+ default-state = "on";
+ };
+ warning {
+ label = "warning";
+ gpios = <&stp 22 0>;
+ default-state = "on";
+ };
+ fxs1 {
+ label = "fxs1";
+ gpios = <&stp 21 0>;
+ default-state = "on";
+ };
+ fxs2 {
+ label = "fxs2";
+ gpios = <&stp 20 0>;
+ default-state = "on";
+ };
+ fxo {
+ label = "fxo";
+ gpios = <&stp 19 0>;
+ default-state = "on";
+ };
+ usb1 {
+ label = "usb1";
+ gpios = <&stp 18 0>;
+ default-state = "on";
+ };
+ usb2 {
+ label = "usb2";
+ gpios = <&stp 15 0>;
+ default-state = "on";
+ };
+ sd {
+ label = "sd";
+ gpios = <&stp 14 0>;
+ default-state = "on";
+ };
+ wps {
+ label = "wps";
+ gpios = <&stp 12 0>;
+ default-state = "on";
+ };
+ };
+};
define PatchKernelLzma
cp $(KDIR)/vmlinux $(KDIR)/vmlinux-$(1)
+ifeq ($(CONFIG_LINUX_3_5),y)
+ $(LINUX_DIR)/scripts/dtc/dtc -O dtb -o $(KDIR)/$(1).dtb ./$(1).dts
+ $(STAGING_DIR_HOST)/bin/patch-dtb $(KDIR)/vmlinux-$(1) $(KDIR)/$(1).dtb
+else
$(STAGING_DIR_HOST)/bin/patch-cmdline $(KDIR)/vmlinux-$(1) '$(strip $(2))'
+endif
$(call CompressLzma,$(KDIR)/vmlinux-$(1),$(KDIR)/vmlinux-$(1).lzma)
endef
ifeq ($(CONFIG_TARGET_lantiq_ase),y)
-Image/BuildKernel/Profile/EASY50601=$(call Image/BuildKernel/Template,EASY50601,$(ase_cmdline))
-Image/Build/Profile/EASY50601=$(call Image/Build/$(1),$(1),EASY50601)
+Image/BuildKernel/Profile/DGN1000B=$(call Image/BuildKernel/Template,DGN1000B)
+Image/Build/Profile/DGN1000B=$(call Image/Build/$(1),$(1),DGN1000B)
-define Image/BuildKernel/Profile/Generic
- $(call Image/BuildKernel/Template,NONE)
-endef
+endif
+
+ifeq ($(CONFIG_TARGET_lantiq_xway),y)
+
+Image/BuildKernel/Profile/EASY80920-NAND=$(call Image/BuildKernel/Template,EASY80920-NAND)
+Image/Build/Profile/EASY80920-NAND=$(call Image/Build/$(1),$(1),EASY80920-NAND)
+Image/BuildKernel/Profile/EASY80920-NOR=$(call Image/BuildKernel/Template,EASY80920-NOR)
+Image/Build/Profile/EASY80920-NOR=$(call Image/Build/$(1),$(1),EASY80920-NOR)
-define Image/Build/Profile/Generic
- $(call Image/Build/$(1),$(1),NONE)
- $(CP) $(KDIR)/root.$(1) $(BIN_DIR)/$(IMG_PREFIX)-$(1).rootfs
-endef
endif
ifeq ($(CONFIG_TARGET_lantiq_vr9),y)
--- /dev/null
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "lantiq,xway", "lantiq,ase";
+
+ cpus {
+ cpu@0 {
+ compatible = "mips,mips4Kc";
+ };
+ };
+
+ biu@1F800000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "lantiq,biu", "simple-bus";
+ reg = <0x1F800000 0x800000>;
+ ranges = <0x0 0x1F800000 0x7FFFFF>;
+
+ icu0: icu@80200 {
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ compatible = "lantiq,icu";
+ reg = <0x80200 0x28
+ 0x80228 0x28
+ 0x80250 0x28
+ 0x80278 0x28
+ 0x802a0 0x28>;
+ };
+
+ watchdog@803F0 {
+ compatible = "lantiq,wdt1";
+ reg = <0x803F0 0x10>;
+ };
+ };
+
+ sram@1F000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "lantiq,sram", "simple-bus";
+ reg = <0x1F000000 0x800000>;
+ ranges = <0x0 0x1F000000 0x7FFFFF>;
+
+ eiu0: eiu@101000 {
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ interrupt-parent;
+ compatible = "lantiq,eiu";
+ reg = <0x101000 0x1000>;
+ lantiq,count = <3>;
+ };
+
+ pmu0: pmu@102000 {
+ compatible = "lantiq,pmu-xway";
+ reg = <0x102000 0x1000>;
+ };
+
+ cgu0: cgu@103000 {
+ compatible = "lantiq,cgu-xway";
+ reg = <0x103000 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ rcu0: rcu@203000 {
+ compatible = "lantiq,rcu-xway";
+ reg = <0x203000 0x1000>;
+ };
+ };
+
+ fpi@10000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "lantiq,fpi", "simple-bus";
+ ranges = <0x0 0x10000000 0xEEFFFFF>;
+ reg = <0x10000000 0xEF00000>;
+
+ gptu@E100A00 {
+ compatible = "lantiq,gptu-xway";
+ reg = <0xE100A00 0x100>;
+ interrupt-parent = <&icu0>;
+ interrupts = <97 98 99 100 101 102>;
+ };
+
+ serial@E100C00 {
+ compatible = "lantiq,asc";
+ reg = <0xE100C00 0x400>;
+ interrupt-parent = <&icu0>;
+ interrupts = <72 74 75>;
+ };
+
+ hcd@E101000 {
+ compatible = "lantiq,hcd";
+ reg = <0xE101000 0x100>;
+ interrupt-parent = <&icu0>;
+ interrupts = <39>;
+ };
+
+ dma0: dma@E104100 {
+ compatible = "lantiq,dma-xway";
+ reg = <0xE104100 0x800>;
+ };
+
+ ebu0: ebu@E105300 {
+ compatible = "lantiq,ebu-xway";
+ reg = <0xE105300 0x100>;
+ };
+ };
+};
--- /dev/null
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "lantiq,xway", "lantiq,danube";
+
+ cpus {
+ cpu@0 {
+ compatible = "mips,mips24Kc";
+ };
+ };
+
+ biu@1F800000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "lantiq,biu", "simple-bus";
+ reg = <0x1F800000 0x800000>;
+ ranges = <0x0 0x1F800000 0x7FFFFF>;
+
+ icu0: icu@80200 {
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ compatible = "lantiq,icu";
+ reg = <0x80200 0x28
+ 0x80228 0x28
+ 0x80250 0x28
+ 0x80278 0x28
+ 0x802a0 0x28>;
+ };
+
+ watchdog@803F0 {
+ compatible = "lantiq,wdt";
+ reg = <0x803F0 0x10>;
+ };
+ };
+
+ sram@1F000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "lantiq,sram";
+ reg = <0x1F000000 0x800000>;
+ ranges = <0x0 0x1F000000 0x7FFFFF>;
+
+ eiu0: eiu@101000 {
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ interrupt-parent;
+ compatible = "lantiq,eiu-xway";
+ reg = <0x101000 0x1000>;
+ };
+
+ pmu0: pmu@102000 {
+ compatible = "lantiq,pmu-xway";
+ reg = <0x102000 0x1000>;
+ };
+
+ cgu0: cgu@103000 {
+ compatible = "lantiq,cgu-xway";
+ reg = <0x103000 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ rcu0: rcu@203000 {
+ compatible = "lantiq,rcu-xway";
+ reg = <0x203000 0x1000>;
+ };
+ };
+
+ fpi@10000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "lantiq,fpi", "simple-bus";
+ ranges = <0x0 0x10000000 0xEEFFFFF>;
+ reg = <0x10000000 0xEF00000>;
+
+ gptu@E100A00 {
+ compatible = "lantiq,gptu-xway";
+ reg = <0xE100A00 0x100>;
+ interrupt-parent = <&icu0>;
+ interrupts = <126 127 128 129 130 131>;
+ };
+
+ serial@E100C00 {
+ compatible = "lantiq,asc";
+ reg = <0xE100C00 0x400>;
+ interrupt-parent = <&icu0>;
+ interrupts = <112 113 114>;
+ };
+
+ dma0: dma@E104100 {
+ compatible = "lantiq,dma-xway";
+ reg = <0xE104100 0x800>;
+ };
+
+ ebu0: ebu@E105300 {
+ compatible = "lantiq,ebu-xway";
+ reg = <0xE105300 0x100>;
+ };
+
+ pci0: pci@E105400 {
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ compatible = "lantiq,pci-xway";
+ bus-range = <0x0 0x0>;
+ ranges = <0x2000000 0 0x8000000 0x8000000 0 0x2000000 /* pci memory */
+ 0x1000000 0 0x00000000 0xAE00000 0 0x200000>; /* io space */
+ reg = <0x7000000 0x8000 /* config space */
+ 0xE105400 0x400>; /* pci bridge */
+ };
+ };
+};
--- /dev/null
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "lantiq,xway", "lantiq,vr9";
+
+ cpus {
+ cpu@0 {
+ compatible = "mips,mips34Kc";
+ };
+ };
+
+ biu@1F800000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "lantiq,biu", "simple-bus";
+ reg = <0x1F800000 0x800000>;
+ ranges = <0x0 0x1F800000 0x7FFFFF>;
+
+ icu0: icu@80200 {
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ compatible = "lantiq,icu";
+ reg = <0x80200 0x28
+ 0x80228 0x28
+ 0x80250 0x28
+ 0x80278 0x28
+ 0x802a0 0x28>;
+ };
+
+ watchdog@803F0 {
+ compatible = "lantiq,wdt";
+ reg = <0x803F0 0x10>;
+ };
+ };
+
+ sram@1F000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "lantiq,sram";
+ reg = <0x1F000000 0x800000>;
+ ranges = <0x0 0x1F000000 0x7FFFFF>;
+
+ eiu0: eiu@101000 {
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ interrupt-parent;
+ compatible = "lantiq,eiu-xway";
+ reg = <0x101000 0x1000>;
+ };
+
+ pmu0: pmu@102000 {
+ compatible = "lantiq,pmu-xway";
+ reg = <0x102000 0x1000>;
+ };
+
+ cgu0: cgu@103000 {
+ compatible = "lantiq,cgu-xway";
+ reg = <0x103000 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ rcu0: rcu@203000 {
+ compatible = "lantiq,rcu-xway";
+ reg = <0x203000 0x1000>;
+ /* irq for thermal sensor */
+ interrupt-parent = <&icu0>;
+ interrupts = <115>;
+ };
+ };
+
+ fpi@10000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "lantiq,fpi", "simple-bus";
+ ranges = <0x0 0x10000000 0xEEFFFFF>;
+ reg = <0x10000000 0xEF00000>;
+
+ gptu@E100A00 {
+ compatible = "lantiq,gptu-xway";
+ reg = <0xE100A00 0x100>;
+ interrupt-parent = <&icu0>;
+ interrupts = <126 127 128 129 130 131>;
+ };
+
+ asc1: serial@E100C00 {
+ compatible = "lantiq,asc";
+ reg = <0xE100C00 0x400>;
+ interrupt-parent = <&icu0>;
+ interrupts = <112 113 114>;
+ };
+
+ dma0: dma@E104100 {
+ compatible = "lantiq,dma-xway";
+ reg = <0xE104100 0x800>;
+ };
+
+ ebu0: ebu@E105300 {
+ compatible = "lantiq,ebu-xway";
+ reg = <0xE105300 0x100>;
+ };
+
+ pci0: pci@E105400 {
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ compatible = "lantiq,pci-xway";
+ bus-range = <0x0 0x0>;
+ ranges = <0x2000000 0 0x8000000 0x8000000 0 0x2000000 /* pci memory */
+ 0x1000000 0 0x00000000 0xAE00000 0 0x200000>; /* io space */
+ reg = <0x7000000 0x8000 /* config space */
+ 0xE105400 0x400>; /* pci bridge */
+ };
+
+ };
+};
projects / openwrt / staging / hauke.git / commitdiff