iwlwifi: don't switch to SGI if not supported by AP
authorEmmanuel Grumbach <emmanuel.grumbach@intel.com>
Thu, 15 May 2008 05:54:08 +0000 (13:54 +0800)
committerJohn W. Linville <linville@tuxdriver.com>
Thu, 22 May 2008 01:48:00 +0000 (21:48 -0400)
This patch fixes SGI support. RS didn't look at the capabilities of the AP
before switching to SGI, this should lead to a stall in the traffic with an
AP that doesn't support SGI.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Guy Cohen <guy.cohen@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
drivers/net/wireless/iwlwifi/iwl-4965-rs.c
drivers/net/wireless/iwlwifi/iwl-dev.h
drivers/net/wireless/iwlwifi/iwl4965-base.c

index 071c7b6ebef203c9e34b9f0bd822033f891916a1..2adc2281c77c75571a3bbe183a0835ac8fa97729 100644 (file)
@@ -1439,6 +1439,15 @@ static int rs_move_siso_to_other(struct iwl_priv *priv,
                        }
                        break;
                case IWL_SISO_SWITCH_GI:
+                       if (!tbl->is_fat &&
+                               !(priv->current_ht_config.sgf &
+                                               HT_SHORT_GI_20MHZ))
+                               break;
+                       if (tbl->is_fat &&
+                               !(priv->current_ht_config.sgf &
+                                               HT_SHORT_GI_40MHZ))
+                               break;
+
                        IWL_DEBUG_RATE("LQ: SISO toggle SGI/NGI\n");
 
                        memcpy(search_tbl, tbl, sz);
@@ -1521,6 +1530,15 @@ static int rs_move_mimo_to_other(struct iwl_priv *priv,
                        break;
 
                case IWL_MIMO_SWITCH_GI:
+                       if (!tbl->is_fat &&
+                               !(priv->current_ht_config.sgf &
+                                               HT_SHORT_GI_20MHZ))
+                               break;
+                       if (tbl->is_fat &&
+                               !(priv->current_ht_config.sgf &
+                                               HT_SHORT_GI_40MHZ))
+                               break;
+
                        IWL_DEBUG_RATE("LQ: MIMO toggle SGI/NGI\n");
 
                        /* Set up new search table for MIMO */
index 4106efd194e409c2bfb991bae4bf0f5122b9be3d..7a54682a3d868e544fad8985e2484f88ccf1dfbd 100644 (file)
@@ -610,8 +610,8 @@ struct iwl_hw_params {
 #endif
 };
 
-#define HT_SHORT_GI_20MHZ_ONLY (1 << 0)
-#define HT_SHORT_GI_40MHZ_ONLY (1 << 1)
+#define HT_SHORT_GI_20MHZ      (1 << 0)
+#define HT_SHORT_GI_40MHZ      (1 << 1)
 
 
 #define IWL_RX_HDR(x) ((struct iwl4965_rx_frame_hdr *)(\
index dd2fd40553067dc96b986a4a39748093fac9da32..a532a9e576dc940a56f47d0f2e401d1ab17eaf7e 100644 (file)
@@ -700,9 +700,9 @@ static void iwl4965_ht_conf(struct iwl_priv *priv,
        priv->ps_mode = (u8)((ht_conf->cap & IEEE80211_HT_CAP_MIMO_PS) >> 2);
 
        if (ht_conf->cap & IEEE80211_HT_CAP_SGI_20)
-               iwl_conf->sgf |= 0x1;
+               iwl_conf->sgf |= HT_SHORT_GI_20MHZ;
        if (ht_conf->cap & IEEE80211_HT_CAP_SGI_40)
-               iwl_conf->sgf |= 0x2;
+               iwl_conf->sgf |= HT_SHORT_GI_40MHZ;
 
        iwl_conf->is_green_field = !!(ht_conf->cap & IEEE80211_HT_CAP_GRN_FLD);
        iwl_conf->max_amsdu_size =