dt-bindings: soc: qcom: Remove SPI controller maximum frequency binding

SPI controller driver should maintain the maximum frequency
of the controller instead of relying on device tree bindings.
Because maximum frequency is specific property of SPI
controller.

Signed-off-by: Dilip Kota <dkota@codeaurora.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Alok Chauhan <alokc@codeaurora.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.txt
index ff92e5a41bedcc15d4126f9a93306f3efe70b1f2..b9d0c216df8c5993949a68ce7a314262144e21d7 100644 (file)
--- a/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.txt
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.txt
@@ -60,7 +60,6 @@ Required properties:
 - interrupts:          Must contain SPI controller interrupts.
 - clock-names:         Must contain "se".
 - clocks:              Serial engine core clock needed by the device.
-- spi-max-frequency:   Specifies maximum SPI clock frequency, units - Hz.
 - #address-cells:      Must be <1> to define a chip select address on
                        the SPI bus.
 - #size-cells:         Must be <0>.
@@ -112,7 +111,6 @@ Example:
                        pinctrl-names = "default", "sleep";
                        pinctrl-0 = <&qup_1_spi_2_active>;
                        pinctrl-1 = <&qup_1_spi_2_sleep>;
-                       spi-max-frequency = <19200000>;
                        #address-cells = <1>;
                        #size-cells = <0>;
                };