Correct spelling typos in printk and comments.
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
unsigned int fw_debug;
module_param(fw_debug, int, 0644);
-MODULE_PARM_DESC(fw_debug, "Firware debug level def:2");
+MODULE_PARM_DESC(fw_debug, "Firmware debug level def:2");
unsigned int encoder_buffers = SAA7164_MAX_ENCODER_BUFFERS;
module_param(encoder_buffers, int, 0644);
tristate "TI TPS6586X RTC driver"
depends on MFD_TPS6586X
help
- TI Power Managment IC TPS6586X supports RTC functionality
+ TI Power Management IC TPS6586X supports RTC functionality
along with alarm. This driver supports the RTC driver for
the TPS6586X RTC module.
tristate "TI TPS80031/TPS80032 RTC driver"
depends on MFD_TPS80031
help
- TI Power Managment IC TPS80031 supports RTC functionality
+ TI Power Management IC TPS80031 supports RTC functionality
along with alarm. This driver supports the RTC driver for
the TPS80031 RTC module.
/* Module parameter for WTSR function control */
static int wtsr_en = 1;
module_param(wtsr_en, int, 0444);
-MODULE_PARM_DESC(wtsr_en, "Wachdog Timeout & Sofware Reset (default=on)");
+MODULE_PARM_DESC(wtsr_en, "Watchdog Timeout & Software Reset (default=on)");
/* Module parameter for SMPL function control */
static int smpl_en = 1;
module_param(smpl_en, int, 0444);
retval = -ENODEV; /* close called more than once */
mutex_unlock(&dev->mutex);
} else {
- dev->opened = 0; /* we're closeing now */
+ dev->opened = 0; /* we're closing now */
retval = 0;
if (dev->present) {
/*
/* this one will match for the IOWarrior56 only */
dev->int_out_endpoint = endpoint;
}
- /* we have to check the report_size often, so remember it in the endianess suitable for our machine */
+ /* we have to check the report_size often, so remember it in the endianness suitable for our machine */
dev->report_size = usb_endpoint_maxp(dev->int_in_endpoint);
if ((dev->interface->cur_altsetting->desc.bInterfaceNumber == 0) &&
(dev->product_id == USB_DEVICE_ID_CODEMERCS_IOW56))
}
/*
- * FB_VMODE_SMOOTH_XPAN will be cleared, if one of the folloing
+ * FB_VMODE_SMOOTH_XPAN will be cleared, if one of the following
* checks failed and smooth scrolling is not possible
*/
goto err_defio;
}
- dev_dbg(info->device, "targetting %d frames per second\n", board->fps);
+ dev_dbg(info->device, "targeting %d frames per second\n", board->fps);
info->fbdefio->delay = HZ / board->fps;
info->fbdefio->first_io = auok190xfb_dpy_first_io,
info->fbdefio->deferred_io = auok190xfb_dpy_deferred_io,
printk(KERN_INFO PFX
"unknown chip production id %i, revision %i\n",
prod_id, revision);
- printk(KERN_INFO PFX "please contant maintainer\n");
+ printk(KERN_INFO PFX "please contact maintainer\n");
goto bail;
}
/*
- * Driver for the Solomon SSD1307 OLED controler
+ * Driver for the Solomon SSD1307 OLED controller
*
* Copyright 2012 Free Electrons
*
module_i2c_driver(ssd1307fb_driver);
-MODULE_DESCRIPTION("FB driver for the Solomon SSD1307 OLED controler");
+MODULE_DESCRIPTION("FB driver for the Solomon SSD1307 OLED controller");
MODULE_AUTHOR("Maxime Ripard <maxime.ripard@free-electrons.com>");
MODULE_LICENSE("GPL");
lseg = kzalloc(lseg_size, gfp_flags);
if (unlikely(!lseg)) {
- dprintk("%s: Faild allocation numdevs=%d size=%zd\n", __func__,
+ dprintk("%s: Failed allocation numdevs=%d size=%zd\n", __func__,
numdevs, lseg_size);
return -ENOMEM;
}
gfp_t gfp_flags);
extern void objio_free_lseg(struct pnfs_layout_segment *lseg);
-/* objio_free_result will free these @oir structs recieved from
+/* objio_free_result will free these @oir structs received from
* objlayout_{read,write}_done
*/
extern void objio_free_result(struct objlayout_io_res *oir);
SOC_ENUM("EQ4 Cut Off", wm8974_enum[10]),
SOC_SINGLE_TLV("EQ4 Volume", WM8974_EQ4, 0, 24, 1, eq_tlv),
-SOC_ENUM("Equaliser EQ5 Bandwith", wm8974_enum[11]),
+SOC_ENUM("Equaliser EQ5 Bandwidth", wm8974_enum[11]),
SOC_ENUM("EQ5 Cut Off", wm8974_enum[12]),
SOC_SINGLE_TLV("EQ5 Volume", WM8974_EQ5, 0, 24, 1, eq_tlv),
!lstat(path_perf, &st))
return run_dir(path_dir, path_perf);
- fprintf(stderr, " (ommitted)");
+ fprintf(stderr, " (omitted)");
return 0;
}
ret = stat(path, &st);
if (ret) {
- pr_debug("ommiting PMU cpu events tests\n");
+ pr_debug("omitting PMU cpu events tests\n");
return 0;
}