KERNEL_PATCHVER:=$(KERNEL_TESTING_PATCHVER)
endif
-LINUX_VERSION-5.4 = .144
+LINUX_VERSION-5.4 = .145
LINUX_VERSION-5.10 = .64
-LINUX_KERNEL_HASH-5.4.144 = bc43b98271ab3885a41c2413bed26b5a6d38795731b9c194f6e72dde45b85885
+LINUX_KERNEL_HASH-5.4.145 = 5cf7782ec2e91417edf0d5e6555da6d556962c8985e33ba9e7dadba5cbdc68f9
LINUX_KERNEL_HASH-5.10.64 = 3eb84bd24a2de2b4749314e34597c02401c5d6831b055ed5224adb405c35e30a
remove_uri_prefix=$(subst git://,,$(subst http://,,$(subst https://,,$(1))))
hcd->msi_enabled = 1;
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
-@@ -1884,6 +1884,7 @@ struct xhci_hcd {
+@@ -1887,6 +1887,7 @@ struct xhci_hcd {
struct xhci_hub usb2_rhub;
struct xhci_hub usb3_rhub;
/* support xHCI 1.0 spec USB2 hardware LPM */
/*
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
-@@ -1874,6 +1874,7 @@ struct xhci_hcd {
+@@ -1877,6 +1877,7 @@ struct xhci_hcd {
#define XHCI_DEFAULT_PM_RUNTIME_ALLOW BIT_ULL(33)
#define XHCI_RESET_PLL_ON_DISCONNECT BIT_ULL(34)
#define XHCI_SNPS_BROKEN_SUSPEND BIT_ULL(35)
val);
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
-@@ -1650,8 +1650,8 @@ struct urb_priv {
+@@ -1653,8 +1653,8 @@ struct urb_priv {
* Each segment table entry is 4*32bits long. 1K seems like an ok size:
* (1K bytes * 8bytes/bit) / (4*32 bits) = 64 segment entries in the table,
* meaning 64 ring segments.
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
-@@ -1877,6 +1877,7 @@ struct xhci_hcd {
+@@ -1880,6 +1880,7 @@ struct xhci_hcd {
#define XHCI_EP_CTX_BROKEN_DCS BIT_ULL(36)
#define XHCI_SKIP_PHY_INIT BIT_ULL(37)
#define XHCI_DISABLE_SPARSE BIT_ULL(38)
/*
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
-@@ -1874,6 +1874,7 @@ struct xhci_hcd {
+@@ -1877,6 +1877,7 @@ struct xhci_hcd {
#define XHCI_DEFAULT_PM_RUNTIME_ALLOW BIT_ULL(33)
#define XHCI_RESET_PLL_ON_DISCONNECT BIT_ULL(34)
#define XHCI_SNPS_BROKEN_SUSPEND BIT_ULL(35)
+++ /dev/null
-From fb033c95c94ca1ee3d16e04ebdb85d65fb55fff8 Mon Sep 17 00:00:00 2001
-From: Ben Dooks <ben-linux@fluff.org>
-Date: Mon, 4 Nov 2019 18:15:15 +0100
-Subject: [PATCH] ARM: 8918/2: only build return_address() if needed
-
-The system currently warns if the config conditions for
-building return_address in arch/arm/kernel/return_address.c
-are not met, leaving just an EXPORT_SYMBOL_GPL(return_address)
-of a function defined to be 'static linline'.
-This is a result of aeea3592a13b ("ARM: 8158/1: LLVMLinux: use static inline in ARM ftrace.h").
-
-Since we're not going to build anything other than an exported
-symbol for something that is already being defined to be an
-inline-able return of NULL, just avoid building the code to
-remove the following warning:
-
-Fixes: aeea3592a13b ("ARM: 8158/1: LLVMLinux: use static inline in ARM ftrace.h")
-Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
----
- arch/arm/kernel/Makefile | 6 +++++-
- arch/arm/kernel/return_address.c | 4 ----
- 2 files changed, 5 insertions(+), 5 deletions(-)
-
---- a/arch/arm/kernel/Makefile
-+++ b/arch/arm/kernel/Makefile
-@@ -17,10 +17,14 @@ CFLAGS_REMOVE_return_address.o = -pg
- # Object file lists.
-
- obj-y := elf.o entry-common.o irq.o opcodes.o \
-- process.o ptrace.o reboot.o return_address.o \
-+ process.o ptrace.o reboot.o \
- setup.o signal.o sigreturn_codes.o \
- stacktrace.o sys_arm.o time.o traps.o
-
-+ifneq ($(CONFIG_ARM_UNWIND),y)
-+obj-$(CONFIG_FRAME_POINTER) += return_address.o
-+endif
-+
- obj-$(CONFIG_ATAGS) += atags_parse.o
- obj-$(CONFIG_ATAGS_PROC) += atags_proc.o
- obj-$(CONFIG_DEPRECATED_PARAM_STRUCT) += atags_compat.o
---- a/arch/arm/kernel/return_address.c
-+++ b/arch/arm/kernel/return_address.c
-@@ -7,8 +7,6 @@
- */
- #include <linux/export.h>
- #include <linux/ftrace.h>
--
--#if defined(CONFIG_FRAME_POINTER) && !defined(CONFIG_ARM_UNWIND)
- #include <linux/sched.h>
-
- #include <asm/stacktrace.h>
-@@ -53,6 +51,4 @@ void *return_address(unsigned int level)
- return NULL;
- }
-
--#endif /* if defined(CONFIG_FRAME_POINTER) && !defined(CONFIG_ARM_UNWIND) */
--
- EXPORT_SYMBOL_GPL(return_address);
if (!is_valid_ether_addr(ndev->dev_addr))
eth_hw_addr_random(ndev);
temac_do_set_mac_address(ndev);
-@@ -1298,7 +1298,7 @@ static int temac_probe(struct platform_d
+@@ -1296,7 +1296,7 @@ static int temac_probe(struct platform_d
struct temac_local *lp;
struct net_device *ndev;
struct resource *res;
__be32 *p;
bool little_endian;
int rc = 0;
-@@ -1494,8 +1494,8 @@ static int temac_probe(struct platform_d
+@@ -1492,8 +1492,8 @@ static int temac_probe(struct platform_d
if (temac_np) {
/* Retrieve the MAC address */
void xhci_init_driver(struct hc_driver *drv,
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
-@@ -2151,6 +2151,16 @@ int xhci_find_raw_port_number(struct usb
+@@ -2154,6 +2154,16 @@ int xhci_find_raw_port_number(struct usb
struct xhci_hub *xhci_get_rhub(struct usb_hcd *hcd);
void xhci_hc_died(struct xhci_hcd *xhci);
ret = xhci_handshake(&xhci->op_regs->command,
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
-@@ -1874,6 +1874,7 @@ struct xhci_hcd {
+@@ -1877,6 +1877,7 @@ struct xhci_hcd {
#define XHCI_DEFAULT_PM_RUNTIME_ALLOW BIT_ULL(33)
#define XHCI_RESET_PLL_ON_DISCONNECT BIT_ULL(34)
#define XHCI_SNPS_BROKEN_SUSPEND BIT_ULL(35)
EXPORT_SYMBOL_GPL(xhci_init_driver);
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
-@@ -1917,6 +1917,7 @@ struct xhci_driver_overrides {
+@@ -1920,6 +1920,7 @@ struct xhci_driver_overrides {
int (*start)(struct usb_hcd *hcd);
int (*check_bandwidth)(struct usb_hcd *, struct usb_device *);
void (*reset_bandwidth)(struct usb_hcd *, struct usb_device *);
projects / openwrt / staging / ynezz.git / commitdiff