[media] omap3isp: Configure CSI-2 phy based on platform data
authorSakari Ailus <sakari.ailus@iki.fi>
Sun, 14 Oct 2012 10:31:50 +0000 (07:31 -0300)
committerMauro Carvalho Chehab <mchehab@redhat.com>
Wed, 28 Nov 2012 12:45:14 +0000 (10:45 -0200)
Configure CSI-2 phy based on platform data in the ISP driver. For that, the
new V4L2_CID_IMAGE_SOURCE_PIXEL_RATE control is used. Previously the same
was configured from the board code.

Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
drivers/media/platform/omap3isp/isp.h
drivers/media/platform/omap3isp/ispcsiphy.c
drivers/media/platform/omap3isp/ispcsiphy.h

index 6fed2228e7806078c60c2cf277064509ebeeac3a..accb3b04f5dc585f2de1f7a409c1f73938ed00cf 100644 (file)
@@ -129,9 +129,6 @@ struct isp_reg {
 
 struct isp_platform_callback {
        u32 (*set_xclk)(struct isp_device *isp, u32 xclk, u8 xclksel);
-       int (*csiphy_config)(struct isp_csiphy *phy,
-                            struct isp_csiphy_dphy_cfg *dphy,
-                            struct isp_csiphy_lanes_cfg *lanes);
 };
 
 /*
index 8ac99b9dc053861df285fa934a741c0201271eb7..d6eb4f9655fec79574ec92aef8dc159d7cda35b5 100644 (file)
@@ -120,36 +120,6 @@ static void csiphy_routing_cfg(struct isp_csiphy *phy, u32 iface, bool on,
                return csiphy_routing_cfg_3430(phy, iface, on, ccp2_strobe);
 }
 
-/*
- * csiphy_lanes_config - Configuration of CSIPHY lanes.
- *
- * Updates HW configuration.
- * Called with phy->mutex taken.
- */
-static void csiphy_lanes_config(struct isp_csiphy *phy)
-{
-       unsigned int i;
-       u32 reg;
-
-       reg = isp_reg_readl(phy->isp, phy->cfg_regs, ISPCSI2_PHY_CFG);
-
-       for (i = 0; i < phy->num_data_lanes; i++) {
-               reg &= ~(ISPCSI2_PHY_CFG_DATA_POL_MASK(i + 1) |
-                        ISPCSI2_PHY_CFG_DATA_POSITION_MASK(i + 1));
-               reg |= (phy->lanes.data[i].pol <<
-                       ISPCSI2_PHY_CFG_DATA_POL_SHIFT(i + 1));
-               reg |= (phy->lanes.data[i].pos <<
-                       ISPCSI2_PHY_CFG_DATA_POSITION_SHIFT(i + 1));
-       }
-
-       reg &= ~(ISPCSI2_PHY_CFG_CLOCK_POL_MASK |
-                ISPCSI2_PHY_CFG_CLOCK_POSITION_MASK);
-       reg |= phy->lanes.clk.pol << ISPCSI2_PHY_CFG_CLOCK_POL_SHIFT;
-       reg |= phy->lanes.clk.pos << ISPCSI2_PHY_CFG_CLOCK_POSITION_SHIFT;
-
-       isp_reg_writel(phy->isp, reg, phy->cfg_regs, ISPCSI2_PHY_CFG);
-}
-
 /*
  * csiphy_power_autoswitch_enable
  * @enable: Sets or clears the autoswitch function enable flag.
@@ -195,43 +165,28 @@ static int csiphy_set_power(struct isp_csiphy *phy, u32 power)
 }
 
 /*
- * csiphy_dphy_config - Configure CSI2 D-PHY parameters.
- *
- * Called with phy->mutex taken.
+ * TCLK values are OK at their reset values
  */
-static void csiphy_dphy_config(struct isp_csiphy *phy)
-{
-       u32 reg;
-
-       /* Set up ISPCSIPHY_REG0 */
-       reg = isp_reg_readl(phy->isp, phy->phy_regs, ISPCSIPHY_REG0);
-
-       reg &= ~(ISPCSIPHY_REG0_THS_TERM_MASK |
-                ISPCSIPHY_REG0_THS_SETTLE_MASK);
-       reg |= phy->dphy.ths_term << ISPCSIPHY_REG0_THS_TERM_SHIFT;
-       reg |= phy->dphy.ths_settle << ISPCSIPHY_REG0_THS_SETTLE_SHIFT;
-
-       isp_reg_writel(phy->isp, reg, phy->phy_regs, ISPCSIPHY_REG0);
-
-       /* Set up ISPCSIPHY_REG1 */
-       reg = isp_reg_readl(phy->isp, phy->phy_regs, ISPCSIPHY_REG1);
-
-       reg &= ~(ISPCSIPHY_REG1_TCLK_TERM_MASK |
-                ISPCSIPHY_REG1_TCLK_MISS_MASK |
-                ISPCSIPHY_REG1_TCLK_SETTLE_MASK);
-       reg |= phy->dphy.tclk_term << ISPCSIPHY_REG1_TCLK_TERM_SHIFT;
-       reg |= phy->dphy.tclk_miss << ISPCSIPHY_REG1_TCLK_MISS_SHIFT;
-       reg |= phy->dphy.tclk_settle << ISPCSIPHY_REG1_TCLK_SETTLE_SHIFT;
+#define TCLK_TERM      0
+#define TCLK_MISS      1
+#define TCLK_SETTLE    14
 
-       isp_reg_writel(phy->isp, reg, phy->phy_regs, ISPCSIPHY_REG1);
-}
-
-static int csiphy_config(struct isp_csiphy *phy,
-                        struct isp_csiphy_dphy_cfg *dphy,
-                        struct isp_csiphy_lanes_cfg *lanes)
+static int omap3isp_csiphy_config(struct isp_csiphy *phy)
 {
+       struct isp_csi2_device *csi2 = phy->csi2;
+       struct isp_pipeline *pipe = to_isp_pipeline(&csi2->subdev.entity);
+       struct isp_v4l2_subdevs_group *subdevs = pipe->external->host_priv;
+       struct isp_csiphy_lanes_cfg *lanes;
+       int csi2_ddrclk_khz;
        unsigned int used_lanes = 0;
        unsigned int i;
+       u32 reg;
+
+       if (subdevs->interface == ISP_INTERFACE_CCP2B_PHY1
+           || subdevs->interface == ISP_INTERFACE_CCP2B_PHY2)
+               lanes = &subdevs->bus.ccp2.lanecfg;
+       else
+               lanes = &subdevs->bus.csi2.lanecfg;
 
        /* Clock and data lanes verification */
        for (i = 0; i < phy->num_data_lanes; i++) {
@@ -250,10 +205,61 @@ static int csiphy_config(struct isp_csiphy *phy,
        if (lanes->clk.pos == 0 || used_lanes & (1 << lanes->clk.pos))
                return -EINVAL;
 
-       mutex_lock(&phy->mutex);
-       phy->dphy = *dphy;
-       phy->lanes = *lanes;
-       mutex_unlock(&phy->mutex);
+       /*
+        * The PHY configuration is lost in off mode, that's not an
+        * issue since the MPU power domain is forced on whilst the
+        * ISP is in use.
+        */
+       csiphy_routing_cfg(phy, subdevs->interface, true,
+                          subdevs->bus.ccp2.phy_layer);
+
+       /* DPHY timing configuration */
+       /* CSI-2 is DDR and we only count used lanes. */
+       csi2_ddrclk_khz = pipe->external_rate / 1000
+               / (2 * hweight32(used_lanes)) * pipe->external_width;
+
+       reg = isp_reg_readl(csi2->isp, phy->phy_regs, ISPCSIPHY_REG0);
+
+       reg &= ~(ISPCSIPHY_REG0_THS_TERM_MASK |
+                ISPCSIPHY_REG0_THS_SETTLE_MASK);
+       /* THS_TERM: Programmed value = ceil(12.5 ns/DDRClk period) - 1. */
+       reg |= (DIV_ROUND_UP(25 * csi2_ddrclk_khz, 2000000) - 1)
+               << ISPCSIPHY_REG0_THS_TERM_SHIFT;
+       /* THS_SETTLE: Programmed value = ceil(90 ns/DDRClk period) + 3. */
+       reg |= (DIV_ROUND_UP(90 * csi2_ddrclk_khz, 1000000) + 3)
+               << ISPCSIPHY_REG0_THS_SETTLE_SHIFT;
+
+       isp_reg_writel(csi2->isp, reg, phy->phy_regs, ISPCSIPHY_REG0);
+
+       reg = isp_reg_readl(csi2->isp, phy->phy_regs, ISPCSIPHY_REG1);
+
+       reg &= ~(ISPCSIPHY_REG1_TCLK_TERM_MASK |
+                ISPCSIPHY_REG1_TCLK_MISS_MASK |
+                ISPCSIPHY_REG1_TCLK_SETTLE_MASK);
+       reg |= TCLK_TERM << ISPCSIPHY_REG1_TCLK_TERM_SHIFT;
+       reg |= TCLK_MISS << ISPCSIPHY_REG1_TCLK_MISS_SHIFT;
+       reg |= TCLK_SETTLE << ISPCSIPHY_REG1_TCLK_SETTLE_SHIFT;
+
+       isp_reg_writel(csi2->isp, reg, phy->phy_regs, ISPCSIPHY_REG1);
+
+       /* DPHY lane configuration */
+       reg = isp_reg_readl(csi2->isp, phy->cfg_regs, ISPCSI2_PHY_CFG);
+
+       for (i = 0; i < phy->num_data_lanes; i++) {
+               reg &= ~(ISPCSI2_PHY_CFG_DATA_POL_MASK(i + 1) |
+                        ISPCSI2_PHY_CFG_DATA_POSITION_MASK(i + 1));
+               reg |= (lanes->data[i].pol <<
+                       ISPCSI2_PHY_CFG_DATA_POL_SHIFT(i + 1));
+               reg |= (lanes->data[i].pos <<
+                       ISPCSI2_PHY_CFG_DATA_POSITION_SHIFT(i + 1));
+       }
+
+       reg &= ~(ISPCSI2_PHY_CFG_CLOCK_POL_MASK |
+                ISPCSI2_PHY_CFG_CLOCK_POSITION_MASK);
+       reg |= lanes->clk.pol << ISPCSI2_PHY_CFG_CLOCK_POL_SHIFT;
+       reg |= lanes->clk.pos << ISPCSI2_PHY_CFG_CLOCK_POSITION_SHIFT;
+
+       isp_reg_writel(csi2->isp, reg, phy->cfg_regs, ISPCSI2_PHY_CFG);
 
        return 0;
 }
@@ -278,8 +284,9 @@ int omap3isp_csiphy_acquire(struct isp_csiphy *phy)
        if (rval < 0)
                goto done;
 
-       csiphy_dphy_config(phy);
-       csiphy_lanes_config(phy);
+       rval = omap3isp_csiphy_config(phy);
+       if (rval < 0)
+               goto done;
 
        rval = csiphy_set_power(phy, ISPCSI2_PHY_CFG_PWR_CMD_ON);
        if (rval) {
@@ -299,6 +306,14 @@ void omap3isp_csiphy_release(struct isp_csiphy *phy)
 {
        mutex_lock(&phy->mutex);
        if (phy->phy_in_use) {
+               struct isp_csi2_device *csi2 = phy->csi2;
+               struct isp_pipeline *pipe =
+                       to_isp_pipeline(&csi2->subdev.entity);
+               struct isp_v4l2_subdevs_group *subdevs =
+                       pipe->external->host_priv;
+
+               csiphy_routing_cfg(phy, subdevs->interface, false,
+                                  subdevs->bus.ccp2.phy_layer);
                csiphy_power_autoswitch_enable(phy, false);
                csiphy_set_power(phy, ISPCSI2_PHY_CFG_PWR_CMD_OFF);
                regulator_disable(phy->vdd);
@@ -315,8 +330,6 @@ int omap3isp_csiphy_init(struct isp_device *isp)
        struct isp_csiphy *phy1 = &isp->isp_csiphy1;
        struct isp_csiphy *phy2 = &isp->isp_csiphy2;
 
-       isp->platform_cb.csiphy_config = csiphy_config;
-
        phy2->isp = isp;
        phy2->csi2 = &isp->isp_csi2a;
        phy2->num_data_lanes = ISP_CSIPHY2_NUM_DATA_LANES;
index e93a661e65d99af981fb541ae7f7cdd39b47706b..14551fd7769780d3f319c6d5d146ed4742b291ac 100644 (file)
 struct isp_csi2_device;
 struct regulator;
 
-struct isp_csiphy_dphy_cfg {
-       u8 ths_term;
-       u8 ths_settle;
-       u8 tclk_term;
-       unsigned tclk_miss:1;
-       u8 tclk_settle;
-};
-
 struct isp_csiphy {
        struct isp_device *isp;
        struct mutex mutex;     /* serialize csiphy configuration */
@@ -52,8 +44,6 @@ struct isp_csiphy {
        unsigned int phy_regs;
 
        u8 num_data_lanes;      /* number of CSI2 Data Lanes supported */
-       struct isp_csiphy_lanes_cfg lanes;
-       struct isp_csiphy_dphy_cfg dphy;
 };
 
 int omap3isp_csiphy_acquire(struct isp_csiphy *phy);