prompt "Target select"
optional
-config TARGET_MPR2
- bool "Magic Panel Release 2 board"
- select CPU_SH3
-
config TARGET_MS7720SE
bool "Support ms7720se"
select CPU_SH3
source "board/alphaproject/ap_sh4a_4a/Kconfig"
source "board/espt/Kconfig"
-source "board/mpr2/Kconfig"
source "board/ms7720se/Kconfig"
source "board/ms7722se/Kconfig"
source "board/ms7750se/Kconfig"
+++ /dev/null
-if TARGET_MPR2
-
-config SYS_BOARD
- default "mpr2"
-
-config SYS_CONFIG_NAME
- default "mpr2"
-
-endif
+++ /dev/null
-MPR2 BOARD
-M: Mark Jonas <mark.jonas@de.bosch.com>
-S: Maintained
-F: board/mpr2/
-F: include/configs/mpr2.h
-F: configs/mpr2_defconfig
+++ /dev/null
-# SPDX-License-Identifier: GPL-2.0+
-#
-# Copyright (C) 2007
-# Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
-#
-# Copyright (C) 2007
-# Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
-#
-# Copyright (C) 2007
-# Kenati Technologies, Inc.
-#
-# (C) Copyright 2008
-# Mark Jonas <mark.jonas@de.bosch.com>
-#
-# board/mpr2/Makefile
-#
-
-obj-y := mpr2.o
-extra-y += lowlevel_init.o
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * (C) Copyright 2008
- * Mark Jonas <mark.jonas@de.bosch.com>
- *
- * (C) Copyright 2007
- * Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
- *
- * board/mpr2/lowlevel_init.S
- */
-#include <asm/macro.h>
-
- .global lowlevel_init
-
- .text
- .align 2
-
-lowlevel_init:
-
-/*
- * Set frequency multipliers and dividers in FRQCR.
- */
- write16 WTCSR_A, WTCSR_D
-
- write16 WTCNT_A, WTCNT_D
-
- write16 FRQCR_A, FRQCR_D
-
-/*
- * Setup CS0 (Flash).
- */
- write32 CS0BCR_A, CS0BCR_D
-
- write32 CS0WCR_A, CS0WCR_D
-
-/*
- * Setup CS3 (SDRAM).
- */
- write32 CS3BCR_A, CS3BCR_D
-
- write32 CS3WCR_A, CS3WCR_D
-
- write32 SDCR_A, SDCR_D1
-
- write32 RTCSR_A, RTCSR_D
-
- write32 RTCNT_A, RTCNT_D
-
- write32 RTCOR_A, RTCOR_D
-
- write32 SDCR_A, SDCR_D2
-
- mov.l SDMR3_A, r1
- mov.l SDMR3_D, r0
- add r0, r1
- mov #0, r0
- mov.w r0, @r1
-
- rts
- nop
-
- .align 4
-
-/*
- * Configuration for MPR2 A.3 through A.7
- */
-
-/*
- * PLL Settings
- */
-FRQCR_D: .word 0x1103 /* I:B:P=8:4:2 */
-WTCNT_D: .word 0x5A00 /* start counting at zero */
-WTCSR_D: .word 0xA507 /* divide by 4096 */
-.align 2
-/*
- * Spansion S29GL256N11 @ 48 MHz
- */
-/* 1 idle cycle inserted, normal space, 16 bit */
-CS0BCR_D: .long 0x12490400
-/* tSW=0.5ck, 6 wait cycles, NO external wait, tHW=0.5ck */
-CS0WCR_D: .long 0x00000340
-
-/*
- * Samsung K4S511632B-UL75 @ 48 MHz
- * Micron MT48LC32M16A2-75 @ 48 MHz
- */
-/* CS3BCR = 0x10004400, minimum idle cycles, SDRAM, 16 bit */
-CS3BCR_D: .long 0x10004400
-/* tRP=1ck, tRCD=1ck, CL=2, tRWL=2ck, tRC=4ck */
-CS3WCR_D: .long 0x00000091
-/* no refresh, 13 rows, 10 cols, NO bank active mode */
-SDCR_D1: .long 0x00000012
-SDCR_D2: .long 0x00000812 /* refresh */
-RTCSR_D: .long 0xA55A0008 /* 1/4, once */
-RTCNT_D: .long 0xA55A005D /* count 93 */
-RTCOR_D: .long 0xa55a005d /* count 93 */
-/* mode register CL2, burst read and SINGLE WRITE */
-SDMR3_D: .long 0x440
-
-/*
- * Registers
- */
-
-FRQCR_A: .long 0xA415FF80
-WTCNT_A: .long 0xA415FF84
-WTCSR_A: .long 0xA415FF86
-
-#define BSC_BASE 0xA4FD0000
-CS0BCR_A: .long BSC_BASE + 0x04
-CS3BCR_A: .long BSC_BASE + 0x0C
-CS0WCR_A: .long BSC_BASE + 0x24
-CS3WCR_A: .long BSC_BASE + 0x2C
-SDCR_A: .long BSC_BASE + 0x44
-RTCSR_A: .long BSC_BASE + 0x48
-RTCNT_A: .long BSC_BASE + 0x4C
-RTCOR_A: .long BSC_BASE + 0x50
-SDMR3_A: .long BSC_BASE + 0x5000
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2008
- * Mark Jonas <mark.jonas@de.bosch.com>
- *
- * board/mpr2/mpr2.c
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <asm/processor.h>
-
-int checkboard(void)
-{
- puts("BOARD: MPR2\n");
- return 0;
-}
-
-int board_init(void)
-{
- /*
- * For MPR2 A.3 through A.7
- */
-
- /* CS2: Ethernet (0xA8000000 - 0xABFFFFFF) */
- __raw_writel(0x36db0400, CS2BCR); /* 4 idle cycles, normal space, 16 bit data bus */
- __raw_writel(0x000003c0, CS2WCR); /* (WR:8), no ext. wait */
-
- /* CS4: CAN1 (0xB0000000 - 0xB3FFFFFF) */
- __raw_writel(0x00000200, CS4BCR); /* no idle cycles, normal space, 8 bit data bus */
- __raw_writel(0x00100981, CS4WCR); /* (SW:1.5 WR:3 HW:1.5), ext. wait */
-
- /* CS5a: CAN2 (0xB4000000 - 0xB5FFFFFF) */
- __raw_writel(0x00000200, CS5ABCR); /* no idle cycles, normal space, 8 bit data bus */
- __raw_writel(0x00100981, CS5AWCR); /* (SW:1.5 WR:3 HW:1.5), ext. wait */
-
- /* CS5b: CAN3 (0xB6000000 - 0xB7FFFFFF) */
- __raw_writel(0x00000200, CS5BBCR); /* no idle cycles, normal space, 8 bit data bus */
- __raw_writel(0x00100981, CS5BWCR); /* (SW:1.5 WR:3 HW:1.5), ext. wait */
-
- /* CS6a: Rotary (0xB8000000 - 0xB9FFFFFF) */
- __raw_writel(0x00000200, CS6ABCR); /* no idle cycles, normal space, 8 bit data bus */
- __raw_writel(0x001009C1, CS6AWCR); /* (SW:1.5 WR:3 HW:1.5), no ext. wait */
-
- /* set Pin Select Register A: /PCC_CD1, /PCC_CD2, PCC_BVD1, PCC_BVD2, /IOIS16, IRQ4, IRQ5, USB1d_SUSPEND */
- __raw_writew(0xAABC, PSELA); /* 10 10 10 10 10 11 11 00 */
-
- /* set Pin Select Register B: /SCIF0_RTS, /SCIF0_CTS, LCD_VCPWC, LCD_VEPWC, IIC_SDA, IIC_SCL, Reserved */
- __raw_writew(0x3C00, PSELB); /* 0 0 11 11 0 0 00000000 */
-
- /* set Pin Select Register C: SIOF1_SCK, SIOF1_RxD, SCIF1_RxD, SCIF1_TxD, Reserved */
- __raw_writew(0x0000, PSELC); /* 00 00 00 00 00000000 */
-
- /* set Pin Select Register D: Reserved, SIOF1_TxD, Reserved, SIOF1_MCLK, Reserved, SIOF1_SYNC, Reserved, SCIF1_SCK, Reserved */
- __raw_writew(0x0000, PSELD); /* 0 00 00 00 00 00 00 00 0 */
-
- /* OTH: (00) Other fuction
- * GPO: (01) General Purpose Output
- * GPI: (11) General Purpose Input
- * GPI+: (10) General Purpose Input with internal pull-up
- *-------------------------------------------------------
- * A7 GPO(LED8); A6 GPO(LED7); A5 GPO(LED6); A4 GPO(LED5);
- * A3 GPO(LED4); A2 GPO(LED3); A1 GPO(LED2); A0 GPO(LED1); */
- __raw_writew(0x5555, PACR); /* 01 01 01 01 01 01 01 01 */
-
- /* B7 GPO(RST4); B6 GPO(RST3); B5 GPO(RST2); B4 GPO(RST1);
- * B3 GPO(PB3); B2 GPO(PB2); B1 GPO(PB1); B0 GPO(PB0); */
- __raw_writew(0x5555, PBCR); /* 01 01 01 01 01 01 01 01 */
-
- /* C7 GPO(PC7); C6 GPO(PC6); C5 GPO(PC5); C4 GPO(PC4);
- * C3 LCD_DATA3; C2 LCD_DATA2; C1 LCD_DATA1; C0 LCD_DATA0; */
- __raw_writew(0x5500, PCCR); /* 01 01 01 01 00 00 00 00 */
-
- /* D7 GPO(PD7); D6 GPO(PD6); D5 GPO(PD5); D4 GPO(PD4);
- * D3 GPO(PD3); D2 GPO(PD2); D1 GPO(PD1); D0 GPO(PD0); */
- __raw_writew(0x5555, PDCR); /* 01 01 01 01 01 01 01 01 */
-
- /* E7 (x); E6 GPI(nu); E5 GPI(nu); E4 LCD_M_DISP;
- * E3 LCD_CL1; E2 LCD_CL2; E1 LCD_DON; E0 LCD_FLM; */
- __raw_writew(0x2800, PECR); /* 00 10 10 00 00 00 00 00 */
-
- /* F7 (x); F6 DA1(VLCD); F5 DA0(nc); F4 AN3;
- * F3 AN2(MID_AD); F2 AN1(EARTH_AD); F1 AN0(TEMP); F0 GPI+(nc); */
- __raw_writew(0x0002, PFCR); /* 00 00 00 00 00 00 00 10 */
-
- /* G7 (x); G6 IRQ5(TOUCH_BUSY); G5 IRQ4(TOUCH_IRQ);G4 GPI(KEY2);
- * G3 GPI(KEY1); G2 GPO(LED11); G1 GPO(LED10); G0 GPO(LED9); */
- __raw_writew(0x03D5, PGCR); /* 00 00 00 11 11 01 01 01 */
-
- /* H7 (x); H6 /RAS(BRAS); H5 /CAS(BCAS); H4 CKE(BCKE);
- * H3 GPO(EARTH_OFF); H2 GPO(EARTH_TEST); H1 USB2_PWR; H0 USB1_PWR; */
- __raw_writew(0x0050, PHCR); /* 00 00 00 00 01 01 00 00 */
-
- /* J7 (x); J6 AUDCK; J5 ASEBRKAK; J4 AUDATA3;
- * J3 AUDATA2; J2 AUDATA1; J1 AUDATA0; J0 AUDSYNC; */
- __raw_writew(0x0000, PJCR); /* 00 00 00 00 00 00 00 00 */
-
- /* K7 (x); K6 (x); K5 (x); K4 (x)
- * K3 PINT7(/PWR2); K2 PINT6(/PWR1); K1 PINT5(nc); K0 PINT4(FLASH_READY); */
- __raw_writew(0x00FB, PKCR); /* 00 00 00 00 11 11 10 11 */
-
- /* L7 TRST; L6 TMS; L5 TDO; L4 TDI;
- * L3 TCK; L2 (x); L1 (x); L0 (x); */
- __raw_writew(0x0000, PLCR); /* 00 00 00 00 00 00 00 00 */
-
- /* M7 GPO(CURRENT_SINK);M6 GPO(PWR_SWITCH); M5 GPO(LAN_SPEED); M4 GPO(LAN_RESET);
- * M3 GPO(BUZZER); M2 GPO(LCD_BL); M1 CS5B(CAN3_CS); M0 GPI+(nc); */
- __raw_writew(0x5552, PMCR); /* 01 01 01 01 01 01 00 10 */
- __raw_writeb(0xF0, PMDR); /* CURRENT_SINK=off, PWR_SWITCH=off, LAN_SPEED=100MBit, LAN_RESET=off, BUZZER=off, LCD_BL=off */
-
- /* P7 (x); P6 (x); P5 (x); P4 GPO(on pullup);
- * P3 IRQ3(LAN_IRQ); P2 IRQ2(CAN3_IRQ);P1 IRQ1(CAN2_IRQ); P0 IRQ0(CAN1_IRQ); */
- __raw_writew(0x0100, PPCR); /* 00 00 00 01 00 00 00 00 */
- __raw_writeb(0x10, PPDR); /* no current flow through pullup */
-
- /* R7 A25; R6 A24; R5 A23; R4 A22;
- * R3 A21; R2 A20; R1 A19; R0 A0; */
- __raw_writew(0x0000, PRCR); /* 00 00 00 00 00 00 00 00 */
-
- /* S7 (x); S6 (x); S5 (x); S4 GPO(EEPROM_CS2);
- * S3 GPO(EEPROM_CS1); S2 SIOF0_TXD; S1 SIOF0_RXD; S0 SIOF0_SCK; */
- __raw_writew(0x0140, PSCR); /* 00 00 00 01 01 00 00 00 */
-
- /* T7 (x); T6 (x); T5 (x); T4 COM1_CTS;
- * T3 COM1_RTS; T2 COM1_TXD; T1 COM1_RXD; T0 GPO(WDOG); */
- __raw_writew(0x0001, PTCR); /* 00 00 00 00 00 00 00 01 */
-
- /* U7 (x); U6 (x); U5 (x); U4 GPI+(/AC_FAULT);
- * U3 GPO(TOUCH_CS); U2 TOUCH_TXD; U1 TOUCH_RXD; U0 TOUCH_SCK; */
- __raw_writew(0x0240, PUCR); /* 00 00 00 10 01 00 00 00 */
-
- /* V7 (x); V6 (x); V5 (x); V4 GPO(MID2);
- * V3 GPO(MID1); V2 CARD_TxD; V1 CARD_RxD; V0 GPI+(/BAT_FAULT); */
- __raw_writew(0x0142, PVCR); /* 00 00 00 01 01 00 00 10 */
-
- return 0;
-}
+++ /dev/null
-CONFIG_SH=y
-CONFIG_SYS_TEXT_BASE=0x8FFC0000
-CONFIG_TARGET_MPR2=y
-CONFIG_USE_BOOTARGS=y
-CONFIG_BOOTARGS="console=ttySC0,115200"
-CONFIG_VERSION_VARIABLE=y
-# CONFIG_CMDLINE_EDITING is not set
-# CONFIG_AUTO_COMPLETE is not set
-# CONFIG_AUTOBOOT is not set
-# CONFIG_CMD_BDI is not set
-# CONFIG_CMD_CONSOLE is not set
-# CONFIG_CMD_BOOTD is not set
-# CONFIG_CMD_RUN is not set
-# CONFIG_CMD_IMI is not set
-# CONFIG_CMD_XIMG is not set
-# CONFIG_CMD_EDITENV is not set
-# CONFIG_CMD_ENV_EXISTS is not set
-# CONFIG_CMD_LOADB is not set
-# CONFIG_CMD_LOADS is not set
-# CONFIG_CMD_ECHO is not set
-# CONFIG_CMD_ITEST is not set
-# CONFIG_CMD_SOURCE is not set
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_CACHE=y
-# CONFIG_CMD_MISC is not set
-# CONFIG_NET is not set
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_SCIF_CONSOLE=y
-CONFIG_USE_PRIVATE_LIBGCC=y
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Configuation settings for MPR2
- *
- * Copyright (C) 2008
- * Mark Jonas <mark.jonas@de.bosch.com>
- */
-
-#ifndef __MPR2_H
-#define __MPR2_H
-
-/* Supported commands */
-
-/* Default environment variables */
-#define CONFIG_BOOTFILE "/boot/zImage"
-#define CONFIG_LOADADDR 0x8E000000
-
-/* CPU and platform */
-#define CONFIG_CPU_SH7720 1
-
-#define CONFIG_DISPLAY_BOARDINFO
-
-/* U-Boot internals */
-#define CONFIG_SYS_BAUDRATE_TABLE { 115200 } /* List of legal baudrate settings for this board */
-#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 32 * 1024 * 1024)
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
-#define CONFIG_SYS_MONITOR_LEN (128 * 1024)
-#define CONFIG_SYS_MALLOC_LEN (256 * 1024)
-
-/* Memory */
-#define CONFIG_SYS_SDRAM_BASE 0x8C000000
-#define CONFIG_SYS_SDRAM_SIZE (64 * 1024 * 1024)
-#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
-#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + (60 * 1024 * 1024))
-
-/* Flash */
-#define CONFIG_SYS_FLASH_EMPTY_INFO
-#define CONFIG_SYS_FLASH_BASE 0xA0000000
-#define CONFIG_SYS_MAX_FLASH_SECT 256
-#define CONFIG_SYS_MAX_FLASH_BANKS 1
-#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE }
-#define CONFIG_ENV_SECT_SIZE (128 * 1024)
-#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE
-#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
-#define CONFIG_SYS_FLASH_ERASE_TOUT 120000
-#define CONFIG_SYS_FLASH_WRITE_TOUT 500
-
-/* Clocks */
-#define CONFIG_SYS_CLK_FREQ 24000000
-#define CONFIG_SH_SCIF_CLK_FREQ CONFIG_SYS_CLK_FREQ
-
-/* UART */
-#define CONFIG_CONS_SCIF0 1
-
-#endif /* __MPR2_H */
projects / project / bcm63xx / u-boot.git / commitdiff