// SPDX-License-Identifier: GPL-2.0+
/*
- * (C) Copyright 2010
- * Heiko Schocher, DENX Software Engineering, hs@denx.de
+ * (C) Copyright 2018 Theobroma Systems Design und Consulting GmbH
+ *
+ * Based on a the Linux rtc-rv3029c2.c driver written by:
+ * Gregory Hermant <gregory.hermant@calao-systems.com>
+ * Michael Buesch <m@bues.ch>
*/
+
#include <common.h>
#include <command.h>
+#include <dm.h>
#include <i2c.h>
#include <rtc.h>
-#define RTC_RV3029_CTRL1 0x00
-#define RTC_RV3029_CTRL1_EERE (1 << 3)
-
-#define RTC_RV3029_CTRL_STATUS 0x03
-#define RTC_RV3029_CTRLS_EEBUSY (1 << 7)
+#define RTC_RV3029_PAGE_LEN 7
-#define RTC_RV3029_CTRL_RESET 0x04
-#define RTC_RV3029_CTRL_SYS_R (1 << 4)
+/* control section */
+#define RV3029_ONOFF_CTRL 0x00
+#define RV3029_ONOFF_CTRL_WE BIT(0)
+#define RV3029_ONOFF_CTRL_TE BIT(1)
+#define RV3029_ONOFF_CTRL_TAR BIT(2)
+#define RV3029_ONOFF_CTRL_EERE BIT(3)
+#define RV3029_ONOFF_CTRL_SRON BIT(4)
+#define RV3029_ONOFF_CTRL_TD0 BIT(5)
+#define RV3029_ONOFF_CTRL_TD1 BIT(6)
+#define RV3029_ONOFF_CTRL_CLKINT BIT(7)
+#define RV3029_IRQ_CTRL 0x01
+#define RV3029_IRQ_CTRL_AIE BIT(0)
+#define RV3029_IRQ_CTRL_TIE BIT(1)
+#define RV3029_IRQ_CTRL_V1IE BIT(2)
+#define RV3029_IRQ_CTRL_V2IE BIT(3)
+#define RV3029_IRQ_CTRL_SRIE BIT(4)
+#define RV3029_IRQ_FLAGS 0x02
+#define RV3029_IRQ_FLAGS_AF BIT(0)
+#define RV3029_IRQ_FLAGS_TF BIT(1)
+#define RV3029_IRQ_FLAGS_V1IF BIT(2)
+#define RV3029_IRQ_FLAGS_V2IF BIT(3)
+#define RV3029_IRQ_FLAGS_SRF BIT(4)
+#define RV3029_STATUS 0x03
+#define RV3029_STATUS_VLOW1 BIT(2)
+#define RV3029_STATUS_VLOW2 BIT(3)
+#define RV3029_STATUS_SR BIT(4)
+#define RV3029_STATUS_PON BIT(5)
+#define RV3029_STATUS_EEBUSY BIT(7)
+#define RV3029_RST_CTRL 0x04
+#define RV3029_RST_CTRL_SYSR BIT(4)
+#define RV3029_CONTROL_SECTION_LEN 0x05
-#define RTC_RV3029_CLOCK_PAGE 0x08
-#define RTC_RV3029_PAGE_LEN 7
+/* watch section */
+#define RV3029_W_SEC 0x08
+#define RV3029_W_MINUTES 0x09
+#define RV3029_W_HOURS 0x0A
+#define RV3029_REG_HR_12_24 BIT(6) /* 24h/12h mode */
+#define RV3029_REG_HR_PM BIT(5) /* PM/AM bit in 12h mode */
+#define RV3029_W_DATE 0x0B
+#define RV3029_W_DAYS 0x0C
+#define RV3029_W_MONTHS 0x0D
+#define RV3029_W_YEARS 0x0E
-#define RV3029C2_W_SECONDS 0x00
-#define RV3029C2_W_MINUTES 0x01
-#define RV3029C2_W_HOURS 0x02
-#define RV3029C2_W_DATE 0x03
-#define RV3029C2_W_DAYS 0x04
-#define RV3029C2_W_MONTHS 0x05
-#define RV3029C2_W_YEARS 0x06
+/* eeprom control section */
+#define RV3029_CONTROL_E2P_EECTRL 0x30
+#define RV3029_TRICKLE_1K BIT(4) /* 1.5K resistance */
+#define RV3029_TRICKLE_5K BIT(5) /* 5K resistance */
+#define RV3029_TRICKLE_20K BIT(6) /* 20K resistance */
+#define RV3029_TRICKLE_80K BIT(7) /* 80K resistance */
+#define RV3029_TRICKLE_MASK (RV3029_TRICKLE_1K |\
+ RV3029_TRICKLE_5K |\
+ RV3029_TRICKLE_20K |\
+ RV3029_TRICKLE_80K)
+#define RV3029_TRICKLE_SHIFT 4
-#define RV3029C2_REG_HR_12_24 (1 << 6) /* 24h/12h mode */
-#define RV3029C2_REG_HR_PM (1 << 5) /* PM/AM bit in 12h mode */
-#define RTC_RV3029_EEPROM_CTRL 0x30
-#define RTC_RV3029_TRICKLE_1K (1 << 4)
-#define RTC_RV3029_TRICKLE_5K (1 << 5)
-#define RTC_RV3029_TRICKLE_20K (1 << 6)
-#define RTC_RV3029_TRICKLE_80K (1 << 7)
-
-int rtc_get( struct rtc_time *tmp )
+static int rv3029_rtc_get(struct udevice *dev, struct rtc_time *tm)
{
- int ret;
- unsigned char buf[RTC_RV3029_PAGE_LEN];
+ u8 regs[RTC_RV3029_PAGE_LEN];
+ int ret;
- ret = i2c_read(CONFIG_SYS_I2C_RTC_ADDR, RTC_RV3029_CLOCK_PAGE, 1, buf, \
- RTC_RV3029_PAGE_LEN);
- if (ret) {
+ ret = dm_i2c_read(dev, RV3029_W_SEC, regs, sizeof(regs));
+ if (ret < 0) {
printf("%s: error reading RTC: %x\n", __func__, ret);
- return -1;
+ return -EIO;
+ }
+
+ tm->tm_sec = bcd2bin(regs[RV3029_W_SEC - RV3029_W_SEC]);
+ tm->tm_min = bcd2bin(regs[RV3029_W_MINUTES - RV3029_W_SEC]);
+
+ /* HR field has a more complex interpretation */
+ {
+ const u8 _hr = regs[RV3029_W_HOURS - RV3029_W_SEC];
+
+ if (_hr & RV3029_REG_HR_12_24) {
+ /* 12h format */
+ tm->tm_hour = bcd2bin(_hr & 0x1f);
+ if (_hr & RV3029_REG_HR_PM) /* PM flag set */
+ tm->tm_hour += 12;
+ } else {
+ /* 24h format */
+ tm->tm_hour = bcd2bin(_hr & 0x3f);
+ }
}
- tmp->tm_sec = bcd2bin( buf[RV3029C2_W_SECONDS] & 0x7f);
- tmp->tm_min = bcd2bin( buf[RV3029C2_W_MINUTES] & 0x7f);
- if (buf[RV3029C2_W_HOURS] & RV3029C2_REG_HR_12_24) {
- /* 12h format */
- tmp->tm_hour = bcd2bin(buf[RV3029C2_W_HOURS] & 0x1f);
- if (buf[RV3029C2_W_HOURS] & RV3029C2_REG_HR_PM)
- /* PM flag set */
- tmp->tm_hour += 12;
- } else
- tmp->tm_hour = bcd2bin(buf[RV3029C2_W_HOURS] & 0x3f);
-
- tmp->tm_mday = bcd2bin( buf[RV3029C2_W_DATE] & 0x3F );
- tmp->tm_mon = bcd2bin( buf[RV3029C2_W_MONTHS] & 0x1F );
- tmp->tm_wday = bcd2bin( buf[RV3029C2_W_DAYS] & 0x07 );
+
+ tm->tm_mday = bcd2bin(regs[RV3029_W_DATE - RV3029_W_SEC]);
+ tm->tm_mon = bcd2bin(regs[RV3029_W_MONTHS - RV3029_W_SEC]) - 1;
/* RTC supports only years > 1999 */
- tmp->tm_year = bcd2bin( buf[RV3029C2_W_YEARS]) + 2000;
- tmp->tm_yday = 0;
- tmp->tm_isdst = 0;
+ tm->tm_year = bcd2bin(regs[RV3029_W_YEARS - RV3029_W_SEC]) + 2000;
+ tm->tm_wday = bcd2bin(regs[RV3029_W_DAYS - RV3029_W_SEC]) - 1;
+
+ tm->tm_yday = 0;
+ tm->tm_isdst = 0;
- debug( "Get DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n",
- tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
- tmp->tm_hour, tmp->tm_min, tmp->tm_sec );
+ debug("%s: %4d-%02d-%02d (wday=%d) %2d:%02d:%02d\n",
+ __func__, tm->tm_year, tm->tm_mon, tm->tm_mday,
+ tm->tm_wday, tm->tm_hour, tm->tm_min, tm->tm_sec);
return 0;
}
-int rtc_set( struct rtc_time *tmp )
+static int rv3029_rtc_set(struct udevice *dev, const struct rtc_time *tm)
{
- int ret;
- unsigned char buf[RTC_RV3029_PAGE_LEN];
+ u8 regs[RTC_RV3029_PAGE_LEN];
+
+ debug("%s: %4d-%02d-%02d (wday=%d( %2d:%02d:%02d\n",
+ __func__, tm->tm_year, tm->tm_mon, tm->tm_mday,
+ tm->tm_wday, tm->tm_hour, tm->tm_min, tm->tm_sec);
- debug( "Set DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n",
- tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
- tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
- if (tmp->tm_year < 2000) {
- printf("RTC: year %d < 2000 not possible\n", tmp->tm_year);
- return -1;
+ if (tm->tm_year < 2000) {
+ printf("%s: year %d (before 2000) not supported\n",
+ __func__, tm->tm_year);
+ return -EINVAL;
}
- buf[RV3029C2_W_SECONDS] = bin2bcd(tmp->tm_sec);
- buf[RV3029C2_W_MINUTES] = bin2bcd(tmp->tm_min);
- buf[RV3029C2_W_HOURS] = bin2bcd(tmp->tm_hour);
- /* set 24h format */
- buf[RV3029C2_W_HOURS] &= ~RV3029C2_REG_HR_12_24;
- buf[RV3029C2_W_DATE] = bin2bcd(tmp->tm_mday);
- buf[RV3029C2_W_DAYS] = bin2bcd(tmp->tm_wday);
- buf[RV3029C2_W_MONTHS] = bin2bcd(tmp->tm_mon);
- tmp->tm_year -= 2000;
- buf[RV3029C2_W_YEARS] = bin2bcd(tmp->tm_year);
- ret = i2c_write(CONFIG_SYS_I2C_RTC_ADDR, RTC_RV3029_CLOCK_PAGE, 1,
- buf, RTC_RV3029_PAGE_LEN);
-
- /* give the RTC some time to update */
- udelay(1000);
- return ret;
+
+ regs[RV3029_W_SEC - RV3029_W_SEC] = bin2bcd(tm->tm_sec);
+ regs[RV3029_W_MINUTES - RV3029_W_SEC] = bin2bcd(tm->tm_min);
+ regs[RV3029_W_HOURS - RV3029_W_SEC] = bin2bcd(tm->tm_hour);
+ regs[RV3029_W_DATE - RV3029_W_SEC] = bin2bcd(tm->tm_mday);
+ regs[RV3029_W_MONTHS - RV3029_W_SEC] = bin2bcd(tm->tm_mon + 1);
+ regs[RV3029_W_DAYS - RV3029_W_SEC] = bin2bcd(tm->tm_wday + 1) & 0x7;
+ regs[RV3029_W_YEARS - RV3029_W_SEC] = bin2bcd(tm->tm_year - 2000);
+
+ return dm_i2c_write(dev, RV3029_W_SEC, regs, sizeof(regs));
}
-/* sets EERE-Bit (automatic EEPROM refresh) */
-static void set_eere_bit(int state)
+static int rv3029_rtc_reset(struct udevice *dev)
{
- unsigned char reg_ctrl1;
+ u8 ctrl = RV3029_RST_CTRL_SYSR;
+ unsigned long start;
+ const unsigned long timeout_ms = 10000;
+ int ret;
- (void)i2c_read(CONFIG_SYS_I2C_RTC_ADDR, RTC_RV3029_CTRL1, 1,
- ®_ctrl1, 1);
+ /* trigger the system-reset */
+ ret = dm_i2c_write(dev, RV3029_RST_CTRL, &ctrl, 1);
+ if (ret < 0)
+ return -EIO;
- if (state)
- reg_ctrl1 |= RTC_RV3029_CTRL1_EERE;
- else
- reg_ctrl1 &= (~RTC_RV3029_CTRL1_EERE);
+ /* wait for the system-reset to complete */
+ start = get_timer(0);
+ do {
+ if (get_timer(start) > timeout_ms)
+ return -ETIMEDOUT;
- (void)i2c_write(CONFIG_SYS_I2C_RTC_ADDR, RTC_RV3029_CTRL1, 1,
- ®_ctrl1, 1);
+ ret = dm_i2c_read(dev, RV3029_RST_CTRL, &ctrl, 1);
+ if (ret < 0)
+ return -EIO;
+ } while (ctrl & RV3029_RST_CTRL_SYSR);
+
+ return 0;
}
-/* waits until EEPROM page is no longer busy (times out after 10ms*loops) */
-static int wait_eebusy(int loops)
+static int rv3029_rtc_read8(struct udevice *dev, unsigned int reg)
{
- int i;
- unsigned char ctrl_status;
+ u8 data;
+ int ret;
+
+ ret = dm_i2c_read(dev, reg, &data, sizeof(data));
+ return ret < 0 ? ret : data;
+}
- for (i = 0; i < loops; i++) {
- (void)i2c_read(CONFIG_SYS_I2C_RTC_ADDR, RTC_RV3029_CTRL_STATUS,
- 1, &ctrl_status, 1);
+static int rv3029_rtc_write8(struct udevice *dev, unsigned int reg, int val)
+{
+ u8 data = val;
+
+ return dm_i2c_write(dev, reg, &data, 1);
+}
+
+#if defined(OF_CONTROL)
+static int rv3029_get_sr(struct udevice *dev, u8 *buf)
+{
+ int ret = dm_i2c_read(dev, RV3029_STATUS, buf, 1);
+
+ if (ret < 0)
+ return -EIO;
+
+ dev_dbg(dev, "status = 0x%.2x (%d)\n", buf[0], buf[0]);
+ return 0;
+}
- if ((ctrl_status & RTC_RV3029_CTRLS_EEBUSY) == 0)
+static int rv3029_set_sr(struct udevice *dev, u8 val)
+{
+ int ret;
+
+ ret = dm_i2c_read(dev, RV3029_STATUS, &val, 1);
+ if (ret < 0)
+ return -EIO;
+
+ dev_dbg(dev, "status = 0x%.2x (%d)\n", val, val);
+ return 0;
+}
+
+static int rv3029_eeprom_busywait(struct udevice *dev)
+{
+ int i, ret;
+ u8 sr;
+
+ for (i = 100; i > 0; i--) {
+ ret = rv3029_get_sr(dev, &sr);
+ if (ret < 0)
+ break;
+ if (!(sr & RV3029_STATUS_EEBUSY))
break;
udelay(10000);
}
- return i;
+ if (i <= 0) {
+ dev_err(dev, "EEPROM busy wait timeout.\n");
+ return -ETIMEDOUT;
+ }
+
+ return ret;
}
-void rtc_reset (void)
+static int rv3029_update_bits(struct udevice *dev, u8 reg, u8 mask, u8 set)
{
- unsigned char buf[RTC_RV3029_PAGE_LEN];
+ u8 buf;
+ int ret;
- buf[0] = RTC_RV3029_CTRL_SYS_R;
- (void)i2c_write(CONFIG_SYS_I2C_RTC_ADDR, RTC_RV3029_CTRL_RESET, 1,
- buf, 1);
+ ret = dm_i2c_read(dev, reg, &buf, 1);
+ if (ret < 0)
+ return ret;
-#if defined(CONFIG_SYS_RV3029_TCR)
- /*
- * because EEPROM_CTRL register is in EEPROM page it is necessary to
- * disable automatic EEPROM refresh and check if EEPROM is busy
- * before EEPORM_CTRL register may be accessed
- */
- set_eere_bit(0);
- wait_eebusy(100);
- /* read current trickle charger setting */
- (void)i2c_read(CONFIG_SYS_I2C_RTC_ADDR, RTC_RV3029_EEPROM_CTRL,
- 1, buf, 1);
- /* enable automatic EEPROM refresh again */
- set_eere_bit(1);
+ if ((buf & mask) == (set && mask))
+ return 0;
- /*
- * to minimize EEPROM access write trickle charger setting only if it
- * differs from current value
- */
- if ((buf[0] & 0xF0) != CONFIG_SYS_RV3029_TCR) {
- buf[0] = (buf[0] & 0x0F) | CONFIG_SYS_RV3029_TCR;
- /*
- * write trickle charger setting (disable autom. EEPROM
- * refresh and wait until EEPROM is idle)
- */
- set_eere_bit(0);
- wait_eebusy(100);
- (void)i2c_write(CONFIG_SYS_I2C_RTC_ADDR,
- RTC_RV3029_EEPROM_CTRL, 1, buf, 1);
- /*
- * it is necessary to wait 10ms before EEBUSY-Bit may be read
- * (this is not documented in the data sheet yet, but the
- * manufacturer recommends it)
+ buf = (buf & ~mask) | (set & mask);
+ ret = dm_i2c_read(dev, reg, &buf, 1);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+static int rv3029_eeprom_exit(struct udevice *dev)
+{
+ /* Re-enable eeprom refresh */
+ return rv3029_update_bits(dev, RV3029_ONOFF_CTRL,
+ RV3029_ONOFF_CTRL_EERE,
+ RV3029_ONOFF_CTRL_EERE);
+}
+
+static int rv3029_eeprom_enter(struct udevice *dev)
+{
+ int ret;
+ u8 sr;
+
+ /* Check whether we are in the allowed voltage range. */
+ ret = rv3029_get_sr(dev, &sr);
+ if (ret < 0)
+ return ret;
+ if (sr & (RV3029_STATUS_VLOW1 | RV3029_STATUS_VLOW2)) {
+ /* We clear the bits and retry once just in case
+ * we had a brown out in early startup.
*/
+ sr &= ~RV3029_STATUS_VLOW1;
+ sr &= ~RV3029_STATUS_VLOW2;
+ ret = rv3029_set_sr(dev, sr);
+ if (ret < 0)
+ return ret;
udelay(10000);
- /* wait until EEPROM write access is finished */
- wait_eebusy(100);
- set_eere_bit(1);
+ ret = rv3029_get_sr(dev, &sr);
+ if (ret < 0)
+ return ret;
+ if (sr & (RV3029_STATUS_VLOW1 | RV3029_STATUS_VLOW2)) {
+ dev_err(dev, "Supply voltage is too low to safely access the EEPROM.\n");
+ return -ENODEV;
+ }
+ }
+
+ /* Disable eeprom refresh. */
+ ret = rv3029_update_bits(dev,
+ RV3029_ONOFF_CTRL, RV3029_ONOFF_CTRL_EERE, 0);
+ if (ret < 0)
+ return ret;
+
+ /* Wait for any previous eeprom accesses to finish. */
+ ret = rv3029_eeprom_busywait(dev);
+ if (ret < 0)
+ rv3029_eeprom_exit(dev);
+
+ return ret;
+}
+
+static int rv3029_eeprom_read(struct udevice *dev, u8 reg,
+ u8 buf[], size_t len)
+{
+ int ret, err;
+
+ err = rv3029_eeprom_enter(dev);
+ if (err < 0)
+ return err;
+
+ ret = dm_i2c_read(dev, reg, buf, len);
+
+ err = rv3029_eeprom_exit(dev);
+ if (err < 0)
+ return err;
+
+ return ret;
+}
+
+static int rv3029_eeprom_write(struct udevice *dev, u8 reg,
+ u8 const buf[], size_t len)
+{
+ int ret;
+ size_t i;
+ u8 tmp;
+
+ ret = rv3029_eeprom_enter(dev);
+ if (ret < 0)
+ return ret;
+
+ for (i = 0; i < len; i++, reg++) {
+ ret = dm_i2c_read(dev, reg, &tmp, 1);
+ if (ret < 0)
+ break;
+ if (tmp != buf[i]) {
+ ret = dm_i2c_write(dev, reg, &buf[i], 1);
+ if (ret < 0)
+ break;
+ }
+ ret = rv3029_eeprom_busywait(dev);
+ if (ret < 0)
+ break;
}
+
+ ret = rv3029_eeprom_exit(dev);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+static int rv3029_eeprom_update_bits(struct udevice *dev,
+ u8 reg, u8 mask, u8 set)
+{
+ u8 buf;
+ int ret;
+
+ ret = rv3029_eeprom_read(dev, reg, &buf, 1);
+ if (ret < 0)
+ return ret;
+
+ /*
+ * If the EEPROM already reads the correct bitpattern, we don't need
+ * to update it.
+ */
+ if ((buf & mask) == (set & mask))
+ return 0;
+
+ buf = (buf & ~mask) | (set & mask);
+ ret = rv3029_eeprom_write(dev, reg, &buf, 1);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+static void rv3029_trickle_config(struct udevice *dev)
+{
+ static const struct rv3029_trickle_tab_elem {
+ u32 r; /* resistance in ohms */
+ u8 conf; /* trickle config bits */
+ } rv3029_trickle_tab[] = {
+ {
+ .r = 1076,
+ .conf = RV3029_TRICKLE_1K | RV3029_TRICKLE_5K |
+ RV3029_TRICKLE_20K | RV3029_TRICKLE_80K,
+ }, {
+ .r = 1091,
+ .conf = RV3029_TRICKLE_1K | RV3029_TRICKLE_5K |
+ RV3029_TRICKLE_20K,
+ }, {
+ .r = 1137,
+ .conf = RV3029_TRICKLE_1K | RV3029_TRICKLE_5K |
+ RV3029_TRICKLE_80K,
+ }, {
+ .r = 1154,
+ .conf = RV3029_TRICKLE_1K | RV3029_TRICKLE_5K,
+ }, {
+ .r = 1371,
+ .conf = RV3029_TRICKLE_1K | RV3029_TRICKLE_20K |
+ RV3029_TRICKLE_80K,
+ }, {
+ .r = 1395,
+ .conf = RV3029_TRICKLE_1K | RV3029_TRICKLE_20K,
+ }, {
+ .r = 1472,
+ .conf = RV3029_TRICKLE_1K | RV3029_TRICKLE_80K,
+ }, {
+ .r = 1500,
+ .conf = RV3029_TRICKLE_1K,
+ }, {
+ .r = 3810,
+ .conf = RV3029_TRICKLE_5K | RV3029_TRICKLE_20K |
+ RV3029_TRICKLE_80K,
+ }, {
+ .r = 4000,
+ .conf = RV3029_TRICKLE_5K | RV3029_TRICKLE_20K,
+ }, {
+ .r = 4706,
+ .conf = RV3029_TRICKLE_5K | RV3029_TRICKLE_80K,
+ }, {
+ .r = 5000,
+ .conf = RV3029_TRICKLE_5K,
+ }, {
+ .r = 16000,
+ .conf = RV3029_TRICKLE_20K | RV3029_TRICKLE_80K,
+ }, {
+ .r = 20000,
+ .conf = RV3029_TRICKLE_20K,
+ }, {
+ .r = 80000,
+ .conf = RV3029_TRICKLE_80K,
+ },
+ };
+ int err;
+ u32 ohms;
+ u8 trickle_set_bits = 0;
+
+ /* Configure the trickle charger. */
+ err = dev_read_u32(dev, "trickle-resistor-ohms", &ohms);
+
+ if (!err) {
+ /* Find trickle-charger config */
+ for (int i = 0; i < ARRAY_SIZE(rv3029_trickle_tab); i++)
+ if (rv3029_trickle_tab[i].r >= ohms) {
+ dev_dbg(dev, "trickle charger at %d ohms\n",
+ rv3029_trickle_tab[i].r);
+ trickle_set_bits = rv3029_trickle_tab[i].conf;
+ break;
+ }
+ }
+
+ dev_dbg(dev, "trickle charger config 0x%x\n", trickle_set_bits);
+ err = rv3029_eeprom_update_bits(dev, RV3029_CONTROL_E2P_EECTRL,
+ RV3029_TRICKLE_MASK,
+ trickle_set_bits);
+ if (err < 0)
+ dev_dbg(dev, "failed to update trickle charger\n");
+}
+#else
+static inline void rv3029_trickle_config(struct udevice *dev)
+{
+}
#endif
+
+static int rv3029_probe(struct udevice *dev)
+{
+ i2c_set_chip_flags(dev, DM_I2C_CHIP_RD_ADDRESS |
+ DM_I2C_CHIP_WR_ADDRESS);
+
+ rv3029_trickle_config(dev);
+ return 0;
}
+
+static const struct rtc_ops rv3029_rtc_ops = {
+ .get = rv3029_rtc_get,
+ .set = rv3029_rtc_set,
+ .read8 = rv3029_rtc_read8,
+ .write8 = rv3029_rtc_write8,
+ .reset = rv3029_rtc_reset,
+};
+
+static const struct udevice_id rv3029_rtc_ids[] = {
+ { .compatible = "mc,rv3029" },
+ { .compatible = "mc,rv3029c2" },
+ { }
+};
+
+U_BOOT_DRIVER(rtc_rv3029) = {
+ .name = "rtc-rv3029",
+ .id = UCLASS_RTC,
+ .probe = rv3029_probe,
+ .of_match = rv3029_rtc_ids,
+ .ops = &rv3029_rtc_ops,
+};
projects / project / bcm63xx / u-boot.git / commitdiff