--- /dev/null
+From 1a46061a2a4130a08841941ce6dcaa32be2ce312 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
+Date: Tue, 23 Nov 2021 10:03:33 +0100
+Subject: [PATCH] ARM: dts: BCM5301X: use non-deprecated USB 2.0 PHY binding
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+The new binding covers a single reg and uses syscon to reference shared
+register.
+
+References: 55b9b741712d ("dt-bindings: phy: brcm,ns-usb2-phy: bind just a PHY block")
+Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
+Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
+---
+ arch/arm/boot/dts/bcm5301x.dtsi | 20 ++++++++++----------
+ 1 file changed, 10 insertions(+), 10 deletions(-)
+
+--- a/arch/arm/boot/dts/bcm5301x.dtsi
++++ b/arch/arm/boot/dts/bcm5301x.dtsi
+@@ -148,15 +148,6 @@
+ };
+ };
+
+- usb2_phy: usb2-phy@1800c000 {
+- compatible = "brcm,ns-usb2-phy";
+- reg = <0x1800c000 0x1000>;
+- reg-names = "dmu";
+- #phy-cells = <0>;
+- clocks = <&genpll BCM_NSP_GENPLL_USB_PHY_REF_CLK>;
+- clock-names = "phy-ref-clk";
+- };
+-
+ axi@18000000 {
+ compatible = "brcm,bus-axi";
+ reg = <0x18000000 0x1000>;
+@@ -450,7 +441,16 @@
+ "sata1", "sata2";
+ };
+
+- syscon@180 {
++ usb2_phy: phy@164 {
++ compatible = "brcm,ns-usb2-phy";
++ reg = <0x164 0x4>;
++ brcm,syscon-clkset = <&cru_clkset>;
++ clocks = <&genpll BCM_NSP_GENPLL_USB_PHY_REF_CLK>;
++ clock-names = "phy-ref-clk";
++ #phy-cells = <0>;
++ };
++
++ cru_clkset: syscon@180 {
+ compatible = "brcm,cru-clkset", "syscon";
+ reg = <0x180 0x4>;
+ };
--- /dev/null
+From 69c4e53bdd055ecc27761f6971a50c631ff9072e Mon Sep 17 00:00:00 2001
+From: Florian Fainelli <f.fainelli@gmail.com>
+Date: Thu, 2 Dec 2021 15:16:27 -0800
+Subject: [PATCH] ARM: dts: NSP: Fixed iProc PCIe MSI sub-node
+
+Rename the msi controller unit name to 'msi' to avoid collisions with
+the 'msi-controller' boolean property.
+
+Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
+---
+ arch/arm/boot/dts/bcm-nsp.dtsi | 6 +++---
+ 1 file changed, 3 insertions(+), 3 deletions(-)
+
+--- a/arch/arm/boot/dts/bcm-nsp.dtsi
++++ b/arch/arm/boot/dts/bcm-nsp.dtsi
+@@ -587,7 +587,7 @@
+ status = "disabled";
+
+ msi-parent = <&msi0>;
+- msi0: msi-controller {
++ msi0: msi {
+ compatible = "brcm,iproc-msi";
+ msi-controller;
+ interrupt-parent = <&gic>;
+@@ -624,7 +624,7 @@
+ status = "disabled";
+
+ msi-parent = <&msi1>;
+- msi1: msi-controller {
++ msi1: msi {
+ compatible = "brcm,iproc-msi";
+ msi-controller;
+ interrupt-parent = <&gic>;
+@@ -661,7 +661,7 @@
+ status = "disabled";
+
+ msi-parent = <&msi2>;
+- msi2: msi-controller {
++ msi2: msi {
+ compatible = "brcm,iproc-msi";
+ msi-controller;
+ interrupt-parent = <&gic>;
--- /dev/null
+From 9a68c53f875e88edd3403c001ad85f4ac0ed3486 Mon Sep 17 00:00:00 2001
+From: Florian Fainelli <f.fainelli@gmail.com>
+Date: Tue, 7 Dec 2021 10:19:09 -0800
+Subject: [PATCH] ARM: dts: NSP: Rename SATA unit name
+
+Rename the SATA controller unit name from ahci to sata in preparation
+for adding the Broadcom SATA3 controller YAML binding which will bring
+validation.
+
+Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
+---
+ arch/arm/boot/dts/bcm-nsp.dtsi | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/arch/arm/boot/dts/bcm-nsp.dtsi
++++ b/arch/arm/boot/dts/bcm-nsp.dtsi
+@@ -534,7 +534,7 @@
+ };
+ };
+
+- sata: ahci@41000 {
++ sata: sata@41000 {
+ compatible = "brcm,bcm-nsp-ahci";
+ reg-names = "ahci", "top-ctrl";
+ reg = <0x41000 0x1000>, <0x40020 0x1c>;
--- /dev/null
+From 5e33f1c4a7cb914a003a304ab8eef705b17aabb7 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= <arinc.unal@arinc9.com>
+Date: Fri, 17 Dec 2021 00:03:19 +0800
+Subject: [PATCH] ARM: dts: BCM5301X: correct RX delay and enable flow control
+ on Asus RT-AC88U
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+The current 'rx-internal-delay-ps' property value on the Realtek switch
+node, 2000, will be divided by 300, resulting in 6.66, which will be
+rounded to the closest step value, 7. Change it to 2100 to be accurate.
+See ef136837aaf6 ("net: dsa: rtl8365mb: set RGMII RX delay in steps of
+0.3 ns") for reference.
+
+Flow control needs to be enabled on both sides of the internal and
+external switch. It is already enabled on the CPU port of the Realtek
+switch so we also enable it on the external switch port of the Broadcom
+switch as well.
+
+Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
+Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
+---
+ arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts | 3 ++-
+ 1 file changed, 2 insertions(+), 1 deletion(-)
+
+--- a/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts
++++ b/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts
+@@ -138,7 +138,7 @@
+ ethernet = <&sw0_p5>;
+ phy-mode = "rgmii";
+ tx-internal-delay-ps = <2000>;
+- rx-internal-delay-ps = <2000>;
++ rx-internal-delay-ps = <2100>;
+
+ fixed-link {
+ speed = <1000>;
+@@ -213,6 +213,7 @@
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
++ pause;
+ };
+ };
+
--- /dev/null
+From 8b0c59c622dc4dab970ec63264fb5b152944ac80 Mon Sep 17 00:00:00 2001
+From: Arnd Bergmann <arnd@arndb.de>
+Date: Thu, 23 Dec 2021 00:17:17 +0100
+Subject: [PATCH] Revert "ARM: dts: BCM5301X: define RTL8365MB switch on Asus
+ RT-AC88U"
+
+This reverts commit 3d2d52a0d1835b56f6bd67d268f6c39df0e41692, it caused
+a build regression:
+
+arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts:109.4-14: Warning (reg_format): /switch/ports:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1)
+arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dtb: Warning (pci_device_reg): Failed prerequisite 'reg_format'
+arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dtb: Warning (pci_device_bus_num): Failed prerequisite 'reg_format'
+arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dtb: Warning (i2c_bus_reg): Failed prerequisite 'reg_format'
+arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dtb: Warning (spi_bus_reg): Failed prerequisite 'reg_format'
+arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts:106.9-149.5: Warning (avoid_default_addr_size): /switch/ports: Relying on default #address-cells value
+arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts:106.9-149.5: Warning (avoid_default_addr_size): /switch/ports: Relying on default #size-cells value
+
+Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
+Signed-off-by: Arnd Bergmann <arnd@arndb.de>
+---
+ arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts | 77 --------------------
+ 1 file changed, 77 deletions(-)
+
+--- a/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts
++++ b/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts
+@@ -93,83 +93,6 @@
+ gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
+ };
+ };
+-
+- switch {
+- compatible = "realtek,rtl8365mb";
+- /* 7 = MDIO (has input reads), 6 = MDC (clock, output only) */
+- mdc-gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>;
+- mdio-gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>;
+- reset-gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
+- realtek,disable-leds;
+- dsa,member = <1 0>;
+-
+- ports {
+- #address-cells = <1>;
+- #size-cells = <0>;
+- reg = <0>;
+-
+- port@0 {
+- reg = <0>;
+- label = "lan5";
+- phy-handle = <ðphy0>;
+- };
+-
+- port@1 {
+- reg = <1>;
+- label = "lan6";
+- phy-handle = <ðphy1>;
+- };
+-
+- port@2 {
+- reg = <2>;
+- label = "lan7";
+- phy-handle = <ðphy2>;
+- };
+-
+- port@3 {
+- reg = <3>;
+- label = "lan8";
+- phy-handle = <ðphy3>;
+- };
+-
+- port@6 {
+- reg = <6>;
+- label = "cpu";
+- ethernet = <&sw0_p5>;
+- phy-mode = "rgmii";
+- tx-internal-delay-ps = <2000>;
+- rx-internal-delay-ps = <2100>;
+-
+- fixed-link {
+- speed = <1000>;
+- full-duplex;
+- pause;
+- };
+- };
+- };
+-
+- mdio {
+- compatible = "realtek,smi-mdio";
+- #address-cells = <1>;
+- #size-cells = <0>;
+-
+- ethphy0: ethernet-phy@0 {
+- reg = <0>;
+- };
+-
+- ethphy1: ethernet-phy@1 {
+- reg = <1>;
+- };
+-
+- ethphy2: ethernet-phy@2 {
+- reg = <2>;
+- };
+-
+- ethphy3: ethernet-phy@3 {
+- reg = <3>;
+- };
+- };
+- };
+ };
+
+ &srab {
--- /dev/null
+From 441d531ec9b766f49e01c107a3043235daa4493f Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= <arinc.unal@arinc9.com>
+Date: Sun, 2 Jan 2022 23:33:04 +0300
+Subject: [PATCH] ARM: dts: BCM5301X: define RTL8365MB switch on Asus RT-AC88U
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Define the Realtek RTL8365MB switch without interrupt support on the device
+tree of Asus RT-AC88U.
+
+Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
+Acked-by: Alvin Šipraga <alsi@bang-olufsen.dk>
+Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
+---
+ arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts | 76 ++++++++++++++++++++
+ 1 file changed, 76 insertions(+)
+
+--- a/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts
++++ b/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts
+@@ -93,6 +93,82 @@
+ gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
+ };
+ };
++
++ switch {
++ compatible = "realtek,rtl8365mb";
++ /* 7 = MDIO (has input reads), 6 = MDC (clock, output only) */
++ mdc-gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>;
++ mdio-gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>;
++ reset-gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
++ realtek,disable-leds;
++ dsa,member = <1 0>;
++
++ ports {
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ port@0 {
++ reg = <0>;
++ label = "lan5";
++ phy-handle = <ðphy0>;
++ };
++
++ port@1 {
++ reg = <1>;
++ label = "lan6";
++ phy-handle = <ðphy1>;
++ };
++
++ port@2 {
++ reg = <2>;
++ label = "lan7";
++ phy-handle = <ðphy2>;
++ };
++
++ port@3 {
++ reg = <3>;
++ label = "lan8";
++ phy-handle = <ðphy3>;
++ };
++
++ port@6 {
++ reg = <6>;
++ label = "cpu";
++ ethernet = <&sw0_p5>;
++ phy-mode = "rgmii";
++ tx-internal-delay-ps = <2000>;
++ rx-internal-delay-ps = <2100>;
++
++ fixed-link {
++ speed = <1000>;
++ full-duplex;
++ pause;
++ };
++ };
++ };
++
++ mdio {
++ compatible = "realtek,smi-mdio";
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ ethphy0: ethernet-phy@0 {
++ reg = <0>;
++ };
++
++ ethphy1: ethernet-phy@1 {
++ reg = <1>;
++ };
++
++ ethphy2: ethernet-phy@2 {
++ reg = <2>;
++ };
++
++ ethphy3: ethernet-phy@3 {
++ reg = <3>;
++ };
++ };
++ };
+ };
+
+ &srab {
--- /dev/null
+From 66848aff05f669e95795b5f3a163f4762781333e Mon Sep 17 00:00:00 2001
+From: Matthew Hagan <mnhagan88@gmail.com>
+Date: Wed, 23 Feb 2022 23:50:39 +0000
+Subject: [PATCH] ARM: dts: NSP: MX6X: get mac-address from eeprom
+
+The MAC address on the MX64/MX65 series is located on the AT24 EEPROM.
+This is the same as other Meraki devices such as the MR32 [1].
+
+[1] https://lore.kernel.org/linux-arm-kernel/fa8271d02ef74a687f365cebe5c55ec846963ab7.1631986106.git.chunkeey@gmail.com/
+
+Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
+Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
+---
+ arch/arm/boot/dts/bcm958625-meraki-mx6x-common.dtsi | 8 ++++++++
+ 1 file changed, 8 insertions(+)
+
+--- a/arch/arm/boot/dts/bcm958625-meraki-mx6x-common.dtsi
++++ b/arch/arm/boot/dts/bcm958625-meraki-mx6x-common.dtsi
+@@ -39,6 +39,8 @@
+
+ &amac2 {
+ status = "okay";
++ nvmem-cells = <&mac_address>;
++ nvmem-cell-names = "mac-address";
+ };
+
+ &ehci0 {
+@@ -53,6 +55,12 @@
+ reg = <0x50>;
+ pagesize = <32>;
+ read-only;
++ #address-cells = <1>;
++ #size-cells = <1>;
++
++ mac_address: mac-address@66 {
++ reg = <0x66 0x6>;
++ };
+ };
+ };
+
--- /dev/null
+From 482c85c7fc95c572d368b2214b9e9d2c4a2e5789 Mon Sep 17 00:00:00 2001
+From: Matthew Hagan <mnhagan88@gmail.com>
+Date: Wed, 23 Feb 2022 23:50:40 +0000
+Subject: [PATCH] ARM: dts: NSP: MX6X: correct LED function types
+
+Currently, the amber LED will remain always on. This is due to a
+misinterpretation of the LED sub-node properties, where-by "default-state"
+was used to indicate the initial state when powering on the device. When in
+use, however, this resulted in the amber LED always being on. Instead change
+this to only indicate a fault state.
+
+Assign LED_FUNCTION_POWER to the green PWM LED.
+
+These changes bring the MX64/65 in line with the MR32's devicetree.
+
+Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
+Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
+---
+ arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi | 3 +--
+ arch/arm/boot/dts/bcm958625-meraki-kingpin.dtsi | 3 +--
+ arch/arm/boot/dts/bcm958625-meraki-mx6x-common.dtsi | 2 +-
+ 3 files changed, 3 insertions(+), 5 deletions(-)
+
+--- a/arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi
++++ b/arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi
+@@ -57,10 +57,9 @@
+
+ led-4 {
+ /* amber:power */
+- function = LED_FUNCTION_POWER;
++ function = LED_FUNCTION_FAULT;
+ color = <LED_COLOR_ID_AMBER>;
+ gpios = <&gpioa 3 GPIO_ACTIVE_HIGH>;
+- default-state = "on";
+ };
+
+ led-5 {
+--- a/arch/arm/boot/dts/bcm958625-meraki-kingpin.dtsi
++++ b/arch/arm/boot/dts/bcm958625-meraki-kingpin.dtsi
+@@ -106,10 +106,9 @@
+
+ led-a {
+ /* amber:power */
+- function = LED_FUNCTION_POWER;
++ function = LED_FUNCTION_FAULT;
+ color = <LED_COLOR_ID_AMBER>;
+ gpios = <&gpioa 0 GPIO_ACTIVE_LOW>;
+- default-state = "on";
+ };
+
+ led-b {
+--- a/arch/arm/boot/dts/bcm958625-meraki-mx6x-common.dtsi
++++ b/arch/arm/boot/dts/bcm958625-meraki-mx6x-common.dtsi
+@@ -22,7 +22,7 @@
+ };
+
+ led-2 {
+- function = LED_FUNCTION_INDICATOR;
++ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_GREEN>;
+ pwms = <&pwm 2 50000>;
+ max-brightness = <255>;
--- /dev/null
+From c8442f0fb09ca3d842b9b23d1d0650f649fd10f8 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
+Date: Mon, 28 Feb 2022 10:52:07 +0100
+Subject: [PATCH] ARM: dts: BCM5301X: Add Ethernet MAC address to Luxul
+ XWR-3150
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Luxul XWR-3150 stores MAC as NVRAM variable. Add NVMEM cell for it and
+reference it in the Ethernet interface node.
+
+Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
+Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
+---
+ arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts | 8 ++++++++
+ 1 file changed, 8 insertions(+)
+
+--- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts
++++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts
+@@ -25,6 +25,9 @@
+ nvram@1eff0000 {
+ compatible = "brcm,nvram";
+ reg = <0x1eff0000 0x10000>;
++
++ et0macaddr: et0macaddr {
++ };
+ };
+
+ leds {
+@@ -72,6 +75,11 @@
+ };
+ };
+
++&gmac0 {
++ nvmem-cells = <&et0macaddr>;
++ nvmem-cell-names = "mac-address";
++};
++
+ &usb3 {
+ vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
+ };
+++ /dev/null
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Tue, 23 Nov 2021 09:55:06 +0100
-Subject: [PATCH] ARM: dts: BCM5301X: use non-deprecated USB 2.0 PHY binding
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-The new binding covers a single reg and uses syscon to reference shared
-register.
-
-References: 55b9b741712d ("dt-bindings: phy: brcm,ns-usb2-phy: bind just a PHY block")
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
----
- arch/arm/boot/dts/bcm5301x.dtsi | 20 ++++++++++----------
- 1 file changed, 10 insertions(+), 10 deletions(-)
-
---- a/arch/arm/boot/dts/bcm5301x.dtsi
-+++ b/arch/arm/boot/dts/bcm5301x.dtsi
-@@ -148,15 +148,6 @@
- };
- };
-
-- usb2_phy: usb2-phy@1800c000 {
-- compatible = "brcm,ns-usb2-phy";
-- reg = <0x1800c000 0x1000>;
-- reg-names = "dmu";
-- #phy-cells = <0>;
-- clocks = <&genpll BCM_NSP_GENPLL_USB_PHY_REF_CLK>;
-- clock-names = "phy-ref-clk";
-- };
--
- axi@18000000 {
- compatible = "brcm,bus-axi";
- reg = <0x18000000 0x1000>;
-@@ -450,7 +441,16 @@
- "sata1", "sata2";
- };
-
-- syscon@180 {
-+ usb2_phy: phy@164 {
-+ compatible = "brcm,ns-usb2-phy";
-+ reg = <0x164 0x4>;
-+ brcm,syscon-clkset = <&cru_clkset>;
-+ clocks = <&genpll BCM_NSP_GENPLL_USB_PHY_REF_CLK>;
-+ clock-names = "phy-ref-clk";
-+ #phy-cells = <0>;
-+ };
-+
-+ cru_clkset: syscon@180 {
- compatible = "brcm,cru-clkset", "syscon";
- reg = <0x180 0x4>;
- };
projects / openwrt / staging / wigyori.git / commitdiff