ARM: shmobile: r8a7794: add internal PCI bridge nodes

Add device nodes for the R8A7794 internal PCI bridge devices.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi
index e54f3dea2d70f5ccfe32f130269bd1ae877cb3fd..a0747d749bb1628684ae9844722482ca34e99588 100644 (file)
--- a/arch/arm/boot/dts/r8a7794.dtsi
+++ b/arch/arm/boot/dts/r8a7794.dtsi
@@ -648,6 +648,48 @@
                status = "disabled";
        };
 
+       pci0: pci@ee090000 {
+               compatible = "renesas,pci-r8a7794";
+               device_type = "pci";
+               reg = <0 0xee090000 0 0xc00>,
+                     <0 0xee080000 0 0x1100>;
+               interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>;
+               clocks = <&mstp7_clks R8A7794_CLK_EHCI>;
+               power-domains = <&cpg_clocks>;
+               status = "disabled";
+
+               bus-range = <0 0>;
+               #address-cells = <3>;
+               #size-cells = <2>;
+               #interrupt-cells = <1>;
+               ranges = <0x02000000 0 0xee080000 0 0xee080000 0 0x00010000>;
+               interrupt-map-mask = <0xff00 0 0 0x7>;
+               interrupt-map = <0x0000 0 0 1 &gic 0 108 IRQ_TYPE_LEVEL_HIGH
+                                0x0800 0 0 1 &gic 0 108 IRQ_TYPE_LEVEL_HIGH
+                                0x1000 0 0 2 &gic 0 108 IRQ_TYPE_LEVEL_HIGH>;
+       };
+
+       pci1: pci@ee0d0000 {
+               compatible = "renesas,pci-r8a7794";
+               device_type = "pci";
+               reg = <0 0xee0d0000 0 0xc00>,
+                     <0 0xee0c0000 0 0x1100>;
+               interrupts = <0 113 IRQ_TYPE_LEVEL_HIGH>;
+               clocks = <&mstp7_clks R8A7794_CLK_EHCI>;
+               power-domains = <&cpg_clocks>;
+               status = "disabled";
+
+               bus-range = <1 1>;
+               #address-cells = <3>;
+               #size-cells = <2>;
+               #interrupt-cells = <1>;
+               ranges = <0x02000000 0 0xee0c0000 0 0xee0c0000 0 0x00010000>;
+               interrupt-map-mask = <0xff00 0 0 0x7>;
+               interrupt-map = <0x0000 0 0 1 &gic 0 113 IRQ_TYPE_LEVEL_HIGH
+                                0x0800 0 0 1 &gic 0 113 IRQ_TYPE_LEVEL_HIGH
+                                0x1000 0 0 2 &gic 0 113 IRQ_TYPE_LEVEL_HIGH>;
+       };
+
        clocks {
                #address-cells = <2>;
                #size-cells = <2>;