+++ /dev/null
-#!/bin/sh
-
-[ -x /usr/sbin/pppd ] || exit 0
-
-[ -n "$INCLUDE_ONLY" ] || {
- . /etc/functions.sh
- . ../netifd-proto.sh
- init_proto "$@"
-}
-
-ppp_generic_init_config() {
- proto_config_add_string "username"
- proto_config_add_string "password"
- proto_config_add_string "keepalive"
- proto_config_add_int "demand"
- proto_config_add_string "pppd_options"
- proto_config_add_string "connect"
- proto_config_add_string "disconnect"
- proto_config_add_boolean "defaultroute"
- proto_config_add_boolean "peerdns"
- proto_config_add_boolean "ipv6"
- proto_config_add_int "mtu"
-}
-
-ppp_generic_setup() {
- local config="$1"; shift
-
- json_get_var ipv6 ipv6
- [ "$ipv6" = 1 ] || ipv6=""
-
- json_get_var peerdns peerdns
- [ "$peerdns" = 0 ] && peerdns="" || peerdns="1"
-
- json_get_var defaultroute defaultroute
- if [ "$defaultroute" = 1 ]; then
- defaultroute="defaultroute replacedefaultroute";
- else
- defaultroute="nodefaultroute"
- fi
-
- json_get_var demand demand
- if [ "${demand:-0}" -gt 0 ]; then
- demand="precompiled-active-filter /etc/ppp/filter demand idle $demand"
- else
- demand="persist"
- fi
-
- [ -n "$mtu" ] || json_get_var mtu mtu
-
- json_get_var keepalive keepalive
- local interval="${keepalive##*[, ]}"
- [ "$interval" != "$keepalive" ] || interval=5
-
- json_get_var username username
- json_get_var password password
-
- [ -n "$connect" ] || json_get_var connect connect
- [ -n "$disconnect" ] || json_get_var disconnect disconnect
- json_get_var pppd_options pppd_options
-
- proto_run_command "$config" /usr/sbin/pppd \
- nodetach ipparam "$config" \
- ifname "${proto:-ppp}-$config" \
- ${keepalive:+lcp-echo-interval $interval lcp-echo-failure ${keepalive%%[, ]*}} \
- ${ipv6:++ipv6} $defaultroute \
- ${peerdns:+usepeerdns} \
- $demand maxfail 1 \
- ${username:+user "$username" password "$password"} \
- ${connect:+connect "$connect"} \
- ${disconnect:+disconnect "$disconnect"} \
- ip-up-script /lib/netifd/ppp-up \
- ipv6-up-script /lib/netifd/ppp-up \
- ip-down-script /lib/netifd/ppp-down \
- ipv6-down-script /lib/netifd/ppp-down \
- ${mtu:+mtu $mtu mru $mtu} \
- $pppd_options "$@"
-}
-
-ppp_generic_teardown() {
- local interface="$1"
-
- case "$ERROR" in
- 11|19)
- proto_notify_error "$interface" AUTH_FAILED
- proto_block_restart "$interface"
- ;;
- esac
- proto_kill_command "$interface"
-}
-
-# PPP on serial device
-
-proto_ppp_init_config() {
- proto_config_add_string "device"
- ppp_generic_init_config
- no_device=1
- available=1
-}
-
-proto_ppp_setup() {
- local config="$1"
-
- json_get_var device device
- ppp_generic_setup "$config" "$device"
-}
-
-proto_ppp_teardown() {
- ppp_generic_teardown "$@"
-}
-
-proto_pppoe_init_config() {
- ppp_generic_init_config
- proto_config_add_string "ac"
- proto_config_add_string "service"
-}
-
-proto_pppoe_setup() {
- local config="$1"
- local iface="$2"
-
- for module in slhc ppp_generic pppox pppoe; do
- /sbin/insmod $module 2>&- >&-
- done
-
- json_get_var mtu mtu
- mtu="${mtu:-1492}"
-
- json_get_var ac ac
- json_get_var service service
-
- ppp_generic_setup "$config" \
- plugin rp-pppoe.so \
- ${ac:+rp_pppoe_ac "$ac"} \
- ${service:+rp_pppoe_service "$service"} \
- "nic-$iface"
-}
-
-proto_pppoe_teardown() {
- ppp_generic_teardown "$@"
-}
-
-proto_pppoa_init_config() {
- ppp_generic_init_config
- proto_config_add_int "atmdev"
- proto_config_add_int "vci"
- proto_config_add_int "vpi"
- proto_config_add_string "encaps"
-}
-
-proto_pppoa_setup() {
- local config="$1"
- local iface="$2"
-
- for module in slhc ppp_generic pppox pppoatm; do
- /sbin/insmod $module 2>&- >&-
- done
-
- json_get_var atmdev atmdev
- json_get_var vci vci
- json_get_var vpi vpi
-
- json_get_var encaps encaps
- case "$encaps" in
- 1|vc) encaps="vc-encaps" ;;
- *) encaps="llc-encaps" ;;
- esac
-
- ppp_generic_setup "$config" \
- plugin pppoatm.so \
- ${atmdev:+$atmdev.}${vpi:-8}.${vci:-35} \
- ${encaps}
-}
-
-proto_pppoa_teardown() {
- ppp_generic_teardown "$@"
-}
-
-[ -n "$INCLUDE_ONLY" ] || {
- add_protocol ppp
- [ -f /usr/lib/pppd/*/rp-pppoe.so ] && add_protocol pppoe
- [ -f /usr/lib/pppd/*/pppoatm.so ] && add_protocol pppoa
-}
-
$(CP) $(PKG_INSTALL_DIR)/include/pppd $(1)/usr/include/
endef
+ifneq ($(CONFIG_PACKAGE_netifd),)
+ define Package/ppp/script_install
+ $(INSTALL_DIR) $(1)/lib/netifd/proto
+ $(INSTALL_BIN) ./files/ppp.sh $(1)/lib/netifd/proto/
+ endef
+else
+ define Package/ppp/script_install
+ $(INSTALL_DIR) $(1)/lib/network
+ $(INSTALL_BIN) ./files.old/ppp.sh $(1)/lib/network/
+ $(INSTALL_BIN) ./files.old/etc/ppp/ip-up $(1)/etc/ppp/
+ $(INSTALL_DIR) $(1)/etc/ppp/ip-up.d
+ $(INSTALL_BIN) ./files.old/etc/ppp/ip-down $(1)/etc/ppp/
+ $(INSTALL_DIR) $(1)/etc/ppp/ip-down.d
+ $(INSTALL_BIN) ./files.old/etc/ppp/ipv6-up $(1)/etc/ppp/
+ $(INSTALL_BIN) ./files.old/etc/ppp/ipv6-down $(1)/etc/ppp/
+ $(INSTALL_DIR) $(1)/lib/network
+ $(INSTALL_BIN) ./files.old/pppoe.sh $(1)/lib/network/
+ $(INSTALL_DIR) $(1)/lib/network
+ $(INSTALL_BIN) ./files.old/pppoa.sh $(1)/lib/network/
+ $(INSTALL_DIR) $(1)/etc/hotplug.d/atm
+ $(INSTALL_DATA) ./files.old/etc/hotplug.d/atm/20-atm-modem $(1)/etc/hotplug.d/atm/
+ endef
+endif
+
define Package/ppp/install
$(INSTALL_DIR) $(1)/usr/lib/pppd/$(PKG_VERSION)
$(INSTALL_DIR) $(1)/usr/sbin
$(INSTALL_BIN) $(PKG_INSTALL_DIR)/sbin/pppd $(1)/usr/sbin/
- $(INSTALL_DIR) $(1)/lib/network
- $(INSTALL_BIN) ./files/ppp.sh $(1)/lib/network/
$(INSTALL_DIR) $(1)/etc/ppp
$(INSTALL_CONF) ./files/etc/ppp/chap-secrets $(1)/etc/ppp/
$(INSTALL_DATA) ./files/etc/ppp/filter $(1)/etc/ppp/
- $(INSTALL_BIN) ./files/etc/ppp/ip-up $(1)/etc/ppp/
- $(INSTALL_DIR) $(1)/etc/ppp/ip-up.d
- $(INSTALL_BIN) ./files/etc/ppp/ip-down $(1)/etc/ppp/
- $(INSTALL_DIR) $(1)/etc/ppp/ip-down.d
- $(INSTALL_BIN) ./files/etc/ppp/ipv6-up $(1)/etc/ppp/
- $(INSTALL_BIN) ./files/etc/ppp/ipv6-down $(1)/etc/ppp/
$(INSTALL_DATA) ./files/etc/ppp/options $(1)/etc/ppp/
ln -sf /tmp/resolv.conf.ppp $(1)/etc/ppp/resolv.conf
+ $(Package/ppp/script_install)
endef
Package/ppp-multilink/install=$(Package/ppp/install)
$(INSTALL_DIR) $(1)/usr/lib/pppd/$(PKG_VERSION)
$(INSTALL_BIN) $(PKG_INSTALL_DIR)/lib/pppd/$(PKG_VERSION)/pppoatm.so \
$(1)/usr/lib/pppd/$(PKG_VERSION)/
- $(INSTALL_DIR) $(1)/lib/network
- $(INSTALL_BIN) ./files/pppoa.sh $(1)/lib/network/
- $(INSTALL_DIR) $(1)/etc/hotplug.d/atm
- $(INSTALL_DATA) ./files/etc/hotplug.d/atm/20-atm-modem $(1)/etc/hotplug.d/atm/
endef
define Package/ppp-mod-pppoe/install
$(INSTALL_DIR) $(1)/usr/lib/pppd/$(PKG_VERSION)
$(INSTALL_BIN) $(PKG_INSTALL_DIR)/lib/pppd/$(PKG_VERSION)/rp-pppoe.so \
$(1)/usr/lib/pppd/$(PKG_VERSION)/
- $(INSTALL_DIR) $(1)/lib/network
- $(INSTALL_BIN) ./files/pppoe.sh $(1)/lib/network/
endef
define Package/ppp-mod-radius/install
--- /dev/null
+#!/bin/sh
+
+if [ "$ACTION" = "add" ]; then
+ include /lib/network
+ scan_interfaces
+
+ local found=0
+ local ifc
+ for ifc in $interfaces; do
+ local up
+ config_get_bool up "$ifc" up 0
+
+ local auto
+ config_get_bool auto "$ifc" auto 1
+
+ local proto
+ config_get proto "$ifc" proto
+
+ if [ "$proto" = "pppoa" ] && [ "$up" != 1 ] && [ "$auto" = 1 ]; then
+ found=1
+ ( sleep 1; ifup "$ifc" ) &
+ fi
+ done
+
+ if [ "$found" != 1 ]; then
+ logger "Found no matching interface for DSL device $DEVICENAME"
+ fi
+fi
--- /dev/null
+#!/bin/sh
+. /etc/functions.sh
+PPP_IFACE="$1"
+PPP_TTY="$2"
+PPP_SPEED="$3"
+PPP_LOCAL="$4"
+PPP_REMOTE="$5"
+PPP_IPPARAM="$(echo $6 | sed 's/\./_/g')"
+export PPP_IFACE PPP_TTY PPP_SPEED PPP_LOCAL PPP_REMOTE PPP_IPPARAM
+[ -z "$PPP_IPPARAM" ] || {
+ case "$PPP_IFACE" in
+ # only handle uci managed interfaces here, others are done by generic hotplug
+ 3g-*|ppp-*|pppoa-*|pppoe-*|pptp-*)
+ env -i ACTION="ifdown" INTERFACE="$PPP_IPPARAM" DEVICE="$PPP_IFACE" PROTO=ppp /sbin/hotplug-call "iface"
+ uci_revert_state network "$PPP_IPPARAM"
+ ;;
+ esac
+}
+
+[ -d /etc/ppp/ip-down.d ] && {
+ for SCRIPT in /etc/ppp/ip-down.d/*
+ do
+ [ -x "$SCRIPT" ] && "$SCRIPT" "$@"
+ done
+}
--- /dev/null
+#!/bin/sh
+
+. /etc/functions.sh
+. /lib/network/config.sh
+
+PPP_IFACE="$1"
+PPP_TTY="$2"
+PPP_SPEED="$3"
+PPP_LOCAL="$4"
+PPP_REMOTE="$5"
+PPP_IPPARAM="$(echo $6 | sed 's/\./_/g')"
+
+export PPP_IFACE PPP_TTY PPP_SPEED PPP_LOCAL PPP_REMOTE PPP_IPPARAM
+[ -z "$PPP_IPPARAM" -o -z "$PPP_LOCAL" ] || {
+ uci_set_state network "$PPP_IPPARAM" ifname "$PPP_IFACE"
+ uci_set_state network "$PPP_IPPARAM" ipaddr "$PPP_LOCAL"
+ uci_set_state network "$PPP_IPPARAM" gateway "$PPP_REMOTE"
+
+ local dns="$DNS1${DNS2:+ $DNS2}"
+ [ -n "$dns" ] && add_dns "$PPP_IPPARAM" $dns
+}
+
+[ -z "$PPP_IPPARAM" ] || {
+ case "$PPP_IFACE" in
+ # only handle uci managed interfaces here, others are done by generic hotplug
+ 3g-*|ppp-*|pppoa-*|pppoe-*|pptp-*)
+ env -i ACTION="ifup" INTERFACE="$PPP_IPPARAM" DEVICE="$PPP_IFACE" PROTO=ppp /sbin/hotplug-call "iface"
+ ;;
+ esac
+}
+
+[ -d /etc/ppp/ip-up.d ] && {
+ for SCRIPT in /etc/ppp/ip-up.d/*
+ do
+ [ -x "$SCRIPT" ] && "$SCRIPT" "$@"
+ done
+}
--- /dev/null
+#!/bin/sh
+
+gw=$5
+dev=$1
+cfg=$6
+
+. /etc/functions.sh # common functions
+include /lib/network # include /lib/network/*.sh
+scan_interfaces # read and parse the network config
+
+config_get_bool defaultroute "$cfg" defaultroute 1
+
+if [ ${defaultroute} -eq 1 ]
+then
+ route -A inet6 del default gw ${gw} dev ${dev}
+fi
--- /dev/null
+#!/bin/sh
+
+gw=$5
+dev=$1
+cfg=$6
+
+. /etc/functions.sh # common functions
+include /lib/network # include /lib/network/*.sh
+scan_interfaces # read and parse the network config
+
+config_get_bool defaultroute "$cfg" defaultroute 1
+
+if [ ${defaultroute} -eq 1 ]
+then
+ route -A inet6 add default gw ${gw} dev ${dev}
+fi
--- /dev/null
+stop_interface_ppp() {
+ local cfg="$1"
+
+ local proto
+ config_get proto "$cfg" proto
+
+ local link="$proto-$cfg"
+ SERVICE_PID_FILE="/var/run/ppp-${link}.pid" \
+ service_stop /usr/sbin/pppd
+
+ remove_dns "$cfg"
+
+ local lock="/var/lock/ppp-$link"
+ [ -f "$lock" ] && lock -u "$lock"
+}
+
+start_pppd() {
+ local cfg="$1"; shift
+
+ # Workaround for PPPoE service and AC name options,
+ # filter out the nic-* argument and append it as last option
+ local nic=""
+ case "$1" in
+ nic-*) nic="$1"; shift ;;
+ esac
+
+ local proto
+ config_get proto "$cfg" proto
+
+ # unique link identifier
+ local link="${proto:-ppp}-$cfg"
+
+ # make sure only one pppd process is started
+ lock "/var/lock/ppp-${link}"
+ SERVICE_PID_FILE="/var/run/ppp-${link}.pid" \
+ service_check /usr/sbin/pppd && {
+ lock -u "/var/lock/ppp-${link}"
+ return 0
+ }
+
+ # Workaround: sometimes hotplug2 doesn't deliver the hotplug event for creating
+ # /dev/ppp fast enough to be used here
+ [ -e /dev/ppp ] || mknod /dev/ppp c 108 0
+
+ local device
+ config_get device "$cfg" device
+
+ local username
+ config_get username "$cfg" username
+
+ local password
+ config_get password "$cfg" password
+
+ local keepalive
+ config_get keepalive "$cfg" keepalive
+
+ local connect
+ config_get connect "$cfg" connect
+
+ local disconnect
+ config_get disconnect "$cfg" disconnect
+
+ local pppd_options
+ config_get pppd_options "$cfg" pppd_options
+
+ local defaultroute
+ config_get_bool defaultroute "$cfg" defaultroute 1
+ [ "$defaultroute" -eq 1 ] && \
+ defaultroute="defaultroute replacedefaultroute" || defaultroute="nodefaultroute"
+
+ local interval="${keepalive##*[, ]}"
+ [ "$interval" != "$keepalive" ] || interval=5
+
+ local dns
+ config_get dns "$config" dns
+
+ local has_dns=0
+ local peer_default=1
+ [ -n "$dns" ] && {
+ has_dns=1
+ peer_default=0
+ }
+
+ local peerdns
+ config_get_bool peerdns "$cfg" peerdns $peer_default
+
+ [ "$peerdns" -eq 1 ] && {
+ peerdns="usepeerdns"
+ } || {
+ peerdns=""
+ add_dns "$cfg" $dns
+ }
+
+ local demand
+ config_get demand "$cfg" demand 0
+
+ local demandargs
+ [ "$demand" -gt 0 ] && {
+ demandargs="precompiled-active-filter /etc/ppp/filter demand idle $demand"
+ [ "$has_dns" -eq 0 ] && add_dns "$cfg" 1.1.1.1
+ } || {
+ demandargs="persist"
+ }
+
+ local ipv6
+ config_get_bool ipv6 "$cfg" ipv6 0
+ [ "$ipv6" -eq 1 ] && ipv6="+ipv6" || ipv6=""
+
+ SERVICE_DAEMONIZE=1 \
+ SERVICE_WRITE_PID=1 \
+ SERVICE_PID_FILE="/var/run/ppp-$link.pid" \
+ service_start /usr/sbin/pppd "$@" \
+ ${keepalive:+lcp-echo-interval $interval lcp-echo-failure ${keepalive%%[, ]*}} \
+ $demandargs \
+ $peerdns \
+ $defaultroute \
+ ${username:+user "$username" password "$password"} \
+ ipparam "$cfg" \
+ ifname "$link" \
+ ${connect:+connect "$connect"} \
+ ${disconnect:+disconnect "$disconnect"} \
+ ${ipv6} \
+ ${pppd_options} \
+ nodetach \
+ ${nic}
+
+ lock -u "/var/lock/ppp-${link}"
+}
+
+setup_interface_ppp() {
+ local iface="$1"
+ local config="$2"
+
+ local device
+ config_get device "$config" device
+
+ local mtu
+ config_get mtu "$config" mtu
+
+ mtu=${mtu:-1492}
+ start_pppd "$config" \
+ mtu $mtu mru $mtu \
+ "$device"
+}
+
--- /dev/null
+scan_pppoa() {
+ config_set "$1" device "pppoa-$1"
+}
+
+stop_interface_pppoa() {
+ stop_interface_ppp "$1"
+}
+
+setup_interface_pppoa() {
+ local config="$2"
+
+ local atmdev
+ config_get atmdev "$config" atmdev
+
+ local vpi
+ config_get vpi "$config" vpi
+
+ local vci
+ config_get vci "$config" vci
+
+ for module in slhc ppp_generic pppoatm; do
+ /sbin/insmod $module 2>&- >&-
+ done
+
+ local encaps
+ config_get encaps "$config" encaps
+
+ case "$encaps" in
+ 1|vc) encaps="vc-encaps" ;;
+ *) encaps="llc-encaps" ;;
+ esac
+
+ local mtu
+ config_get mtu "$config" mtu
+
+ start_pppd "$config" \
+ plugin pppoatm.so ${atmdev:+$atmdev.}${vpi:-8}.${vci:-35} \
+ ${encaps} ${mtu:+mtu $mtu mru $mtu}
+}
--- /dev/null
+stop_interface_pppoe() {
+ stop_interface_ppp "$1"
+}
+
+setup_interface_pppoe() {
+ local iface="$1"
+ local config="$2"
+
+ for module in slhc ppp_generic pppox pppoe; do
+ /sbin/insmod $module 2>&- >&-
+ done
+
+ local mtu
+ config_get mtu "$config" mtu 1492
+
+ local ac
+ config_get ac "$config" ac
+
+ local service
+ config_get service "$config" service
+
+ # NB: the first nic-* argument will be moved to the
+ # end of the argument list by start_pppd()
+ start_pppd "$config" \
+ "nic-$iface" \
+ plugin rp-pppoe.so \
+ ${ac:+rp_pppoe_ac "$ac"} \
+ ${service:+rp_pppoe_service "$service"} \
+ mtu $mtu mru $mtu
+}
+++ /dev/null
-#!/bin/sh
-
-if [ "$ACTION" = "add" ]; then
- include /lib/network
- scan_interfaces
-
- local found=0
- local ifc
- for ifc in $interfaces; do
- local up
- config_get_bool up "$ifc" up 0
-
- local auto
- config_get_bool auto "$ifc" auto 1
-
- local proto
- config_get proto "$ifc" proto
-
- if [ "$proto" = "pppoa" ] && [ "$up" != 1 ] && [ "$auto" = 1 ]; then
- found=1
- ( sleep 1; ifup "$ifc" ) &
- fi
- done
-
- if [ "$found" != 1 ]; then
- logger "Found no matching interface for DSL device $DEVICENAME"
- fi
-fi
+++ /dev/null
-#!/bin/sh
-. /etc/functions.sh
-PPP_IFACE="$1"
-PPP_TTY="$2"
-PPP_SPEED="$3"
-PPP_LOCAL="$4"
-PPP_REMOTE="$5"
-PPP_IPPARAM="$(echo $6 | sed 's/\./_/g')"
-export PPP_IFACE PPP_TTY PPP_SPEED PPP_LOCAL PPP_REMOTE PPP_IPPARAM
-[ -z "$PPP_IPPARAM" ] || {
- case "$PPP_IFACE" in
- # only handle uci managed interfaces here, others are done by generic hotplug
- 3g-*|ppp-*|pppoa-*|pppoe-*|pptp-*)
- env -i ACTION="ifdown" INTERFACE="$PPP_IPPARAM" DEVICE="$PPP_IFACE" PROTO=ppp /sbin/hotplug-call "iface"
- uci_revert_state network "$PPP_IPPARAM"
- ;;
- esac
-}
-
-[ -d /etc/ppp/ip-down.d ] && {
- for SCRIPT in /etc/ppp/ip-down.d/*
- do
- [ -x "$SCRIPT" ] && "$SCRIPT" "$@"
- done
-}
+++ /dev/null
-#!/bin/sh
-
-. /etc/functions.sh
-. /lib/network/config.sh
-
-PPP_IFACE="$1"
-PPP_TTY="$2"
-PPP_SPEED="$3"
-PPP_LOCAL="$4"
-PPP_REMOTE="$5"
-PPP_IPPARAM="$(echo $6 | sed 's/\./_/g')"
-
-export PPP_IFACE PPP_TTY PPP_SPEED PPP_LOCAL PPP_REMOTE PPP_IPPARAM
-[ -z "$PPP_IPPARAM" -o -z "$PPP_LOCAL" ] || {
- uci_set_state network "$PPP_IPPARAM" ifname "$PPP_IFACE"
- uci_set_state network "$PPP_IPPARAM" ipaddr "$PPP_LOCAL"
- uci_set_state network "$PPP_IPPARAM" gateway "$PPP_REMOTE"
-
- local dns="$DNS1${DNS2:+ $DNS2}"
- [ -n "$dns" ] && add_dns "$PPP_IPPARAM" $dns
-}
-
-[ -z "$PPP_IPPARAM" ] || {
- case "$PPP_IFACE" in
- # only handle uci managed interfaces here, others are done by generic hotplug
- 3g-*|ppp-*|pppoa-*|pppoe-*|pptp-*)
- env -i ACTION="ifup" INTERFACE="$PPP_IPPARAM" DEVICE="$PPP_IFACE" PROTO=ppp /sbin/hotplug-call "iface"
- ;;
- esac
-}
-
-[ -d /etc/ppp/ip-up.d ] && {
- for SCRIPT in /etc/ppp/ip-up.d/*
- do
- [ -x "$SCRIPT" ] && "$SCRIPT" "$@"
- done
-}
+++ /dev/null
-#!/bin/sh
-
-gw=$5
-dev=$1
-cfg=$6
-
-. /etc/functions.sh # common functions
-include /lib/network # include /lib/network/*.sh
-scan_interfaces # read and parse the network config
-
-config_get_bool defaultroute "$cfg" defaultroute 1
-
-if [ ${defaultroute} -eq 1 ]
-then
- route -A inet6 del default gw ${gw} dev ${dev}
-fi
+++ /dev/null
-#!/bin/sh
-
-gw=$5
-dev=$1
-cfg=$6
-
-. /etc/functions.sh # common functions
-include /lib/network # include /lib/network/*.sh
-scan_interfaces # read and parse the network config
-
-config_get_bool defaultroute "$cfg" defaultroute 1
-
-if [ ${defaultroute} -eq 1 ]
-then
- route -A inet6 add default gw ${gw} dev ${dev}
-fi
-stop_interface_ppp() {
- local cfg="$1"
+#!/bin/sh
- local proto
- config_get proto "$cfg" proto
+[ -x /usr/sbin/pppd ] || exit 0
- local link="$proto-$cfg"
- SERVICE_PID_FILE="/var/run/ppp-${link}.pid" \
- service_stop /usr/sbin/pppd
+[ -n "$INCLUDE_ONLY" ] || {
+ . /etc/functions.sh
+ . ../netifd-proto.sh
+ init_proto "$@"
+}
+
+ppp_generic_init_config() {
+ proto_config_add_string "username"
+ proto_config_add_string "password"
+ proto_config_add_string "keepalive"
+ proto_config_add_int "demand"
+ proto_config_add_string "pppd_options"
+ proto_config_add_string "connect"
+ proto_config_add_string "disconnect"
+ proto_config_add_boolean "defaultroute"
+ proto_config_add_boolean "peerdns"
+ proto_config_add_boolean "ipv6"
+ proto_config_add_int "mtu"
+}
+
+ppp_generic_setup() {
+ local config="$1"; shift
+
+ json_get_var ipv6 ipv6
+ [ "$ipv6" = 1 ] || ipv6=""
+
+ json_get_var peerdns peerdns
+ [ "$peerdns" = 0 ] && peerdns="" || peerdns="1"
+
+ json_get_var defaultroute defaultroute
+ if [ "$defaultroute" = 1 ]; then
+ defaultroute="defaultroute replacedefaultroute";
+ else
+ defaultroute="nodefaultroute"
+ fi
+
+ json_get_var demand demand
+ if [ "${demand:-0}" -gt 0 ]; then
+ demand="precompiled-active-filter /etc/ppp/filter demand idle $demand"
+ else
+ demand="persist"
+ fi
+
+ [ -n "$mtu" ] || json_get_var mtu mtu
- remove_dns "$cfg"
+ json_get_var keepalive keepalive
+ local interval="${keepalive##*[, ]}"
+ [ "$interval" != "$keepalive" ] || interval=5
+
+ json_get_var username username
+ json_get_var password password
- local lock="/var/lock/ppp-$link"
- [ -f "$lock" ] && lock -u "$lock"
+ [ -n "$connect" ] || json_get_var connect connect
+ [ -n "$disconnect" ] || json_get_var disconnect disconnect
+ json_get_var pppd_options pppd_options
+
+ proto_run_command "$config" /usr/sbin/pppd \
+ nodetach ipparam "$config" \
+ ifname "${proto:-ppp}-$config" \
+ ${keepalive:+lcp-echo-interval $interval lcp-echo-failure ${keepalive%%[, ]*}} \
+ ${ipv6:++ipv6} $defaultroute \
+ ${peerdns:+usepeerdns} \
+ $demand maxfail 1 \
+ ${username:+user "$username" password "$password"} \
+ ${connect:+connect "$connect"} \
+ ${disconnect:+disconnect "$disconnect"} \
+ ip-up-script /lib/netifd/ppp-up \
+ ipv6-up-script /lib/netifd/ppp-up \
+ ip-down-script /lib/netifd/ppp-down \
+ ipv6-down-script /lib/netifd/ppp-down \
+ ${mtu:+mtu $mtu mru $mtu} \
+ $pppd_options "$@"
}
-start_pppd() {
- local cfg="$1"; shift
+ppp_generic_teardown() {
+ local interface="$1"
- # Workaround for PPPoE service and AC name options,
- # filter out the nic-* argument and append it as last option
- local nic=""
- case "$1" in
- nic-*) nic="$1"; shift ;;
+ case "$ERROR" in
+ 11|19)
+ proto_notify_error "$interface" AUTH_FAILED
+ proto_block_restart "$interface"
+ ;;
esac
+ proto_kill_command "$interface"
+}
- local proto
- config_get proto "$cfg" proto
+# PPP on serial device
- # unique link identifier
- local link="${proto:-ppp}-$cfg"
+proto_ppp_init_config() {
+ proto_config_add_string "device"
+ ppp_generic_init_config
+ no_device=1
+ available=1
+}
- # make sure only one pppd process is started
- lock "/var/lock/ppp-${link}"
- SERVICE_PID_FILE="/var/run/ppp-${link}.pid" \
- service_check /usr/sbin/pppd && {
- lock -u "/var/lock/ppp-${link}"
- return 0
- }
+proto_ppp_setup() {
+ local config="$1"
- # Workaround: sometimes hotplug2 doesn't deliver the hotplug event for creating
- # /dev/ppp fast enough to be used here
- [ -e /dev/ppp ] || mknod /dev/ppp c 108 0
+ json_get_var device device
+ ppp_generic_setup "$config" "$device"
+}
- local device
- config_get device "$cfg" device
+proto_ppp_teardown() {
+ ppp_generic_teardown "$@"
+}
- local username
- config_get username "$cfg" username
+proto_pppoe_init_config() {
+ ppp_generic_init_config
+ proto_config_add_string "ac"
+ proto_config_add_string "service"
+}
- local password
- config_get password "$cfg" password
+proto_pppoe_setup() {
+ local config="$1"
+ local iface="$2"
- local keepalive
- config_get keepalive "$cfg" keepalive
+ for module in slhc ppp_generic pppox pppoe; do
+ /sbin/insmod $module 2>&- >&-
+ done
- local connect
- config_get connect "$cfg" connect
+ json_get_var mtu mtu
+ mtu="${mtu:-1492}"
- local disconnect
- config_get disconnect "$cfg" disconnect
+ json_get_var ac ac
+ json_get_var service service
- local pppd_options
- config_get pppd_options "$cfg" pppd_options
+ ppp_generic_setup "$config" \
+ plugin rp-pppoe.so \
+ ${ac:+rp_pppoe_ac "$ac"} \
+ ${service:+rp_pppoe_service "$service"} \
+ "nic-$iface"
+}
- local defaultroute
- config_get_bool defaultroute "$cfg" defaultroute 1
- [ "$defaultroute" -eq 1 ] && \
- defaultroute="defaultroute replacedefaultroute" || defaultroute="nodefaultroute"
+proto_pppoe_teardown() {
+ ppp_generic_teardown "$@"
+}
- local interval="${keepalive##*[, ]}"
- [ "$interval" != "$keepalive" ] || interval=5
+proto_pppoa_init_config() {
+ ppp_generic_init_config
+ proto_config_add_int "atmdev"
+ proto_config_add_int "vci"
+ proto_config_add_int "vpi"
+ proto_config_add_string "encaps"
+}
- local dns
- config_get dns "$config" dns
-
- local has_dns=0
- local peer_default=1
- [ -n "$dns" ] && {
- has_dns=1
- peer_default=0
- }
-
- local peerdns
- config_get_bool peerdns "$cfg" peerdns $peer_default
-
- [ "$peerdns" -eq 1 ] && {
- peerdns="usepeerdns"
- } || {
- peerdns=""
- add_dns "$cfg" $dns
- }
-
- local demand
- config_get demand "$cfg" demand 0
-
- local demandargs
- [ "$demand" -gt 0 ] && {
- demandargs="precompiled-active-filter /etc/ppp/filter demand idle $demand"
- [ "$has_dns" -eq 0 ] && add_dns "$cfg" 1.1.1.1
- } || {
- demandargs="persist"
- }
-
- local ipv6
- config_get_bool ipv6 "$cfg" ipv6 0
- [ "$ipv6" -eq 1 ] && ipv6="+ipv6" || ipv6=""
-
- SERVICE_DAEMONIZE=1 \
- SERVICE_WRITE_PID=1 \
- SERVICE_PID_FILE="/var/run/ppp-$link.pid" \
- service_start /usr/sbin/pppd "$@" \
- ${keepalive:+lcp-echo-interval $interval lcp-echo-failure ${keepalive%%[, ]*}} \
- $demandargs \
- $peerdns \
- $defaultroute \
- ${username:+user "$username" password "$password"} \
- ipparam "$cfg" \
- ifname "$link" \
- ${connect:+connect "$connect"} \
- ${disconnect:+disconnect "$disconnect"} \
- ${ipv6} \
- ${pppd_options} \
- nodetach \
- ${nic}
+proto_pppoa_setup() {
+ local config="$1"
+ local iface="$2"
- lock -u "/var/lock/ppp-${link}"
-}
+ for module in slhc ppp_generic pppox pppoatm; do
+ /sbin/insmod $module 2>&- >&-
+ done
-setup_interface_ppp() {
- local iface="$1"
- local config="$2"
+ json_get_var atmdev atmdev
+ json_get_var vci vci
+ json_get_var vpi vpi
- local device
- config_get device "$config" device
+ json_get_var encaps encaps
+ case "$encaps" in
+ 1|vc) encaps="vc-encaps" ;;
+ *) encaps="llc-encaps" ;;
+ esac
+
+ ppp_generic_setup "$config" \
+ plugin pppoatm.so \
+ ${atmdev:+$atmdev.}${vpi:-8}.${vci:-35} \
+ ${encaps}
+}
- local mtu
- config_get mtu "$config" mtu
+proto_pppoa_teardown() {
+ ppp_generic_teardown "$@"
+}
- mtu=${mtu:-1492}
- start_pppd "$config" \
- mtu $mtu mru $mtu \
- "$device"
+[ -n "$INCLUDE_ONLY" ] || {
+ add_protocol ppp
+ [ -f /usr/lib/pppd/*/rp-pppoe.so ] && add_protocol pppoe
+ [ -f /usr/lib/pppd/*/pppoatm.so ] && add_protocol pppoa
}
+++ /dev/null
-scan_pppoa() {
- config_set "$1" device "pppoa-$1"
-}
-
-stop_interface_pppoa() {
- stop_interface_ppp "$1"
-}
-
-setup_interface_pppoa() {
- local config="$2"
-
- local atmdev
- config_get atmdev "$config" atmdev
-
- local vpi
- config_get vpi "$config" vpi
-
- local vci
- config_get vci "$config" vci
-
- for module in slhc ppp_generic pppoatm; do
- /sbin/insmod $module 2>&- >&-
- done
-
- local encaps
- config_get encaps "$config" encaps
-
- case "$encaps" in
- 1|vc) encaps="vc-encaps" ;;
- *) encaps="llc-encaps" ;;
- esac
-
- local mtu
- config_get mtu "$config" mtu
-
- start_pppd "$config" \
- plugin pppoatm.so ${atmdev:+$atmdev.}${vpi:-8}.${vci:-35} \
- ${encaps} ${mtu:+mtu $mtu mru $mtu}
-}
+++ /dev/null
-stop_interface_pppoe() {
- stop_interface_ppp "$1"
-}
-
-setup_interface_pppoe() {
- local iface="$1"
- local config="$2"
-
- for module in slhc ppp_generic pppox pppoe; do
- /sbin/insmod $module 2>&- >&-
- done
-
- local mtu
- config_get mtu "$config" mtu 1492
-
- local ac
- config_get ac "$config" ac
-
- local service
- config_get service "$config" service
-
- # NB: the first nic-* argument will be moved to the
- # end of the argument list by start_pppd()
- start_pppd "$config" \
- "nic-$iface" \
- plugin rp-pppoe.so \
- ${ac:+rp_pppoe_ac "$ac"} \
- ${service:+rp_pppoe_service "$service"} \
- mtu $mtu mru $mtu
-}
projects / openwrt / staging / stintel.git / commitdiff