arm64: dts: renesas: r8a774a1: Add PCIe device nodes
authorBiju Das <biju.das@bp.renesas.com>
Fri, 7 Jun 2019 07:13:57 +0000 (08:13 +0100)
committerSimon Horman <horms+renesas@verge.net.au>
Wed, 12 Jun 2019 11:38:52 +0000 (13:38 +0200)
This patch adds PCIe{0,1} device nodes for R8A774A1 SoC.

Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
arch/arm64/boot/dts/renesas/r8a774a1.dtsi

index 4b1332feaae55bca54e3eec1cfd4dc86c5791557..eb9f299ff8dbed2048441eb5804db6d3fea55b54 100644 (file)
                        resets = <&cpg 408>;
                };
 
+               pciec0: pcie@fe000000 {
+                       compatible = "renesas,pcie-r8a774a1",
+                                    "renesas,pcie-rcar-gen3";
+                       reg = <0 0xfe000000 0 0x80000>;
+                       #address-cells = <3>;
+                       #size-cells = <2>;
+                       bus-range = <0x00 0xff>;
+                       device_type = "pci";
+                       ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000
+                               0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000
+                               0x02000000 0 0x30000000 0 0x30000000 0 0x08000000
+                               0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
+                       /* Map all possible DDR as inbound ranges */
+                       dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>;
+                       interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+                               <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+                               <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+                       #interrupt-cells = <1>;
+                       interrupt-map-mask = <0 0 0 0>;
+                       interrupt-map = <0 0 0 0 &gic GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+                       clocks = <&cpg CPG_MOD 319>, <&pcie_bus_clk>;
+                       clock-names = "pcie", "pcie_bus";
+                       power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+                       resets = <&cpg 319>;
+                       status = "disabled";
+               };
+
+               pciec1: pcie@ee800000 {
+                       compatible = "renesas,pcie-r8a774a1",
+                                    "renesas,pcie-rcar-gen3";
+                       reg = <0 0xee800000 0 0x80000>;
+                       #address-cells = <3>;
+                       #size-cells = <2>;
+                       bus-range = <0x00 0xff>;
+                       device_type = "pci";
+                       ranges = <0x01000000 0 0x00000000 0 0xee900000 0 0x00100000
+                               0x02000000 0 0xeea00000 0 0xeea00000 0 0x00200000
+                               0x02000000 0 0xc0000000 0 0xc0000000 0 0x08000000
+                               0x42000000 0 0xc8000000 0 0xc8000000 0 0x08000000>;
+                       /* Map all possible DDR as inbound ranges */
+                       dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>;
+                       interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+                               <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+                               <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
+                       #interrupt-cells = <1>;
+                       interrupt-map-mask = <0 0 0 0>;
+                       interrupt-map = <0 0 0 0 &gic GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+                       clocks = <&cpg CPG_MOD 318>, <&pcie_bus_clk>;
+                       clock-names = "pcie", "pcie_bus";
+                       power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+                       resets = <&cpg 318>;
+                       status = "disabled";
+               };
+
                fdp1@fe940000 {
                        compatible = "renesas,fdp1";
                        reg = <0 0xfe940000 0 0x2400>;