ath79: add support for Joy-IT JT-OR750i

Specifications:
 * QCA9531, 16 MiB flash (Winbond W25Q128JVSQ), 128 MiB RAM
 * 802.11n 2T2R (external antennas)
 * QCA9887, 802.11ac 1T1R (connected with diplexer to one of the antennas)
 * 3x 10/100 LAN, 1x 10/100 WAN
 * UART header with pinout printed on PCB

Installation:
 * The device comes with a bootloader installed only
 * The bootloader offers DHCP and is reachable at http://10.123.123.1
 * Accept the agreement and flash sysupgrade.bin
 * Use Firefox if flashing does not work

TFTP recovery with static IP:
 * Rename sysupgrade.bin to jt-or750i_firmware.bin
 * Offer it via TFTP server at 192.168.0.66
 * Keep the reset button pressed for 4 seconds after connecting power

TFTP recovery with dynamic IP:
 * Rename sysupgrade.bin to jt-or750i_firmware.bin
 * Offer it via TFTP server with a DHCP server running at the same address
 * Keep the reset button pressed for 6 seconds after connecting power

Co-authored-by: Sebastian Schaper <openwrt@sebastianschaper.net>
Signed-off-by: Vincent Wiemann <vincent.wiemann@ironai.com>
(cherry picked from commit 55b4b3655263984b92e4b9fc515a5e6b8003c655)

diff --git a/target/linux/ath79/dts/qca9531_joyit_jt-or750i.dts b/target/linux/ath79/dts/qca9531_joyit_jt-or750i.dts
new file mode 100644 (file)
index 0000000..976d342
--- /dev/null
+++ b/target/linux/ath79/dts/qca9531_joyit_jt-or750i.dts
@@ -0,0 +1,119 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca953x.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+       compatible = "joyit,jt-or750i", "qca,qca9531";
+       model = "Joy-IT JT-OR750i";
+
+       aliases {
+               led-boot = &led_status_green;
+               led-failsafe = &led_status_red;
+               led-running = &led_status_green;
+               led-upgrade = &led_status_red;
+               label-mac-device = &eth0;
+       };
+
+       keys {
+               compatible = "gpio-keys";
+
+               reset {
+                       label = "reset";
+                       linux,code = <KEY_RESTART>;
+                       gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+               };
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               led_status_green: status_green {
+                       label = "green:status";
+                       gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+                       default-state = "on";
+               };
+
+               led_status_red: status_red {
+                       label = "red:status";
+                       gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+               };
+       };
+};
+
+&pinmux {
+       pinmux_led_eth_pins: pinmux_led_eth_pins {
+               pinctrl-single,bits = \
+                       /* GPIO 4: LED_LINK_5 (WAN) */     \
+                       <0x04 0x0000002d 0x000000ff>,      \
+                       /* GPIO 14: LED_LINK_2 (LAN 3) */  \
+                       /* GPIO 15: LED_LINK_3 (LAN 2) */  \
+                       <0x0c 0x2b2c0000 0xffff0000>,      \
+                       /* GPIO 16: LED_LINK_4 (LAN 1) */  \
+                       <0x10 0x0000002a 0x000000ff>;
+       };
+};
+
+&spi {
+       status = "okay";
+
+       flash@0 {
+               compatible = "jedec,spi-nor";
+               reg = <0>;
+               spi-max-frequency = <50000000>;
+
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               label = "u-boot";
+                               reg = <0x0 0x40000>;
+                               read-only;
+                       };
+
+                       partition@40000 {
+                               label = "u-boot-env";
+                               reg = <0x40000 0x10000>;
+                               read-only;
+                       };
+
+                       partition@50000 {
+                               label = "firmware";
+                               reg = <0x50000 0xfa0000>;
+                               compatible = "denx,uimage";
+                       };
+
+                       art: partition@ff0000 {
+                               label = "art";
+                               reg = <0xff0000 0x10000>;
+                               read-only;
+                       };
+               };
+       };
+};
+
+&eth0 {
+       status = "okay";
+
+       phy-handle = <&swphy4>;
+
+       mtd-mac-address = <&art 0x0>;
+};
+
+&eth1 {
+       mtd-mac-address = <&art 0x6>;
+};
+
+&pcie0 {
+       status = "okay";
+};
+
+&wmac {
+       status = "okay";
+
+       mtd-cal-data = <&art 0x1000>;
+};

diff --git a/target/linux/ath79/generic/base-files/etc/board.d/01_leds b/target/linux/ath79/generic/base-files/etc/board.d/01_leds
index fae5ac7c923419ba09bbdb696ea18dab6c38a767..7c5eeb1112b7ee88bd34bc588ae0eb29cf7ba857 100755 (executable)
--- a/target/linux/ath79/generic/base-files/etc/board.d/01_leds
+++ b/target/linux/ath79/generic/base-files/etc/board.d/01_leds
@@ -220,6 +220,9 @@ glinet,gl-x750)
 hak5,lan-turtle)
        ucidef_set_led_netdev "wan" "WAN" "orange:system" "eth1"
        ;;
+joyit,jt-or750i)
+       ucidef_set_led_default "ath10k" "ath10k-disable" "ath10k-phy0" "0"
+       ;;
 meraki,mr12|\
 tplink,cpe210-v2|\
 tplink,cpe210-v3)

diff --git a/target/linux/ath79/generic/base-files/etc/board.d/02_network b/target/linux/ath79/generic/base-files/etc/board.d/02_network
index 1e522b91c67565bf066191d3a480d4879a10dcd6..31c0f118613d238ac8fbb73b577e2a57f8921ee0 100755 (executable)
--- a/target/linux/ath79/generic/base-files/etc/board.d/02_network
+++ b/target/linux/ath79/generic/base-files/etc/board.d/02_network
@@ -270,6 +270,11 @@ ath79_setup_interfaces()
                ucidef_add_switch "switch0" \
                        "0@eth0" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan"
                ;;
+       joyit,jt-or750i)
+               ucidef_set_interface_wan "eth1"
+               ucidef_add_switch "switch0" \
+                       "0@eth0" "2:lan:3" "3:lan:2" "4:lan:1"
+               ;;
        librerouter,librerouter-v1)
                ucidef_add_switch "switch0" \
                        "0@eth0" "5:wan" "6@eth1" "4:lan"

diff --git a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
index 5a44dd94e511712e8fe10f062f29c7c89b7baa2d..783895525bc2e120db35223fb299469f175f1c5c 100644 (file)
--- a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -24,6 +24,7 @@ case "$FIRMWARE" in
        comfast,cf-wr650ac-v1|\
        comfast,cf-wr650ac-v2|\
        devolo,magic-2-wifi|\
+       joyit,jt-or750i|\
        qxwlan,e1700ac-v2-8m|\
        qxwlan,e1700ac-v2-16m|\
        qxwlan,e600gac-v2-8m|\

diff --git a/target/linux/ath79/image/generic.mk b/target/linux/ath79/image/generic.mk
index 303907e5bb788ffc6d8d2cb31874909609a7a4fd..ce4e462a40e80a4a829aa605b9cc9867b00d7c5b 100644 (file)
--- a/target/linux/ath79/image/generic.mk
+++ b/target/linux/ath79/image/generic.mk
@@ -1343,6 +1343,15 @@ define Device/jjplus_ja76pf2
 endef
 TARGET_DEVICES += jjplus_ja76pf2
 
+define Device/joyit_jt-or750i
+  SOC := qca9531
+  DEVICE_VENDOR := Joy-IT
+  DEVICE_MODEL := JT-OR750i
+  DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca9887-ct
+  IMAGE_SIZE := 16000k
+endef
+TARGET_DEVICES += joyit_jt-or750i
+
 define Device/librerouter_librerouter-v1
   SOC := qca9558
   DEVICE_VENDOR := Librerouter