obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel_32.o crash_32.o
obj-$(CONFIG_CRASH_DUMP) += crash_dump.o
obj-$(CONFIG_X86_NUMAQ) += numaq.o
-obj-$(CONFIG_X86_SUMMIT_NUMA) += summit.o
+obj-$(CONFIG_X86_SUMMIT_NUMA) += summit_32.o
obj-$(CONFIG_KPROBES) += kprobes.o
obj-$(CONFIG_MODULES) += module_32.o
obj-y += sysenter_32.o vsyscall_32.o
+++ /dev/null
-/*
- * arch/i386/kernel/summit.c - IBM Summit-Specific Code
- *
- * Written By: Matthew Dobson, IBM Corporation
- *
- * Copyright (c) 2003 IBM Corp.
- *
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or (at
- * your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
- * NON INFRINGEMENT. See the GNU General Public License for more
- * details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * Send feedback to <colpatch@us.ibm.com>
- *
- */
-
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <asm/io.h>
-#include <asm/mach-summit/mach_mpparse.h>
-
-static struct rio_table_hdr *rio_table_hdr __initdata;
-static struct scal_detail *scal_devs[MAX_NUMNODES] __initdata;
-static struct rio_detail *rio_devs[MAX_NUMNODES*4] __initdata;
-
-static int __init setup_pci_node_map_for_wpeg(int wpeg_num, int last_bus)
-{
- int twister = 0, node = 0;
- int i, bus, num_buses;
-
- for(i = 0; i < rio_table_hdr->num_rio_dev; i++){
- if (rio_devs[i]->node_id == rio_devs[wpeg_num]->owner_id){
- twister = rio_devs[i]->owner_id;
- break;
- }
- }
- if (i == rio_table_hdr->num_rio_dev){
- printk(KERN_ERR "%s: Couldn't find owner Cyclone for Winnipeg!\n", __FUNCTION__);
- return last_bus;
- }
-
- for(i = 0; i < rio_table_hdr->num_scal_dev; i++){
- if (scal_devs[i]->node_id == twister){
- node = scal_devs[i]->node_id;
- break;
- }
- }
- if (i == rio_table_hdr->num_scal_dev){
- printk(KERN_ERR "%s: Couldn't find owner Twister for Cyclone!\n", __FUNCTION__);
- return last_bus;
- }
-
- switch (rio_devs[wpeg_num]->type){
- case CompatWPEG:
- /* The Compatability Winnipeg controls the 2 legacy buses,
- * the 66MHz PCI bus [2 slots] and the 2 "extra" buses in case
- * a PCI-PCI bridge card is used in either slot: total 5 buses.
- */
- num_buses = 5;
- break;
- case AltWPEG:
- /* The Alternate Winnipeg controls the 2 133MHz buses [1 slot
- * each], their 2 "extra" buses, the 100MHz bus [2 slots] and
- * the "extra" buses for each of those slots: total 7 buses.
- */
- num_buses = 7;
- break;
- case LookOutAWPEG:
- case LookOutBWPEG:
- /* A Lookout Winnipeg controls 3 100MHz buses [2 slots each]
- * & the "extra" buses for each of those slots: total 9 buses.
- */
- num_buses = 9;
- break;
- default:
- printk(KERN_INFO "%s: Unsupported Winnipeg type!\n", __FUNCTION__);
- return last_bus;
- }
-
- for(bus = last_bus; bus < last_bus + num_buses; bus++)
- mp_bus_id_to_node[bus] = node;
- return bus;
-}
-
-static int __init build_detail_arrays(void)
-{
- unsigned long ptr;
- int i, scal_detail_size, rio_detail_size;
-
- if (rio_table_hdr->num_scal_dev > MAX_NUMNODES){
- printk(KERN_WARNING "%s: MAX_NUMNODES too low! Defined as %d, but system has %d nodes.\n", __FUNCTION__, MAX_NUMNODES, rio_table_hdr->num_scal_dev);
- return 0;
- }
-
- switch (rio_table_hdr->version){
- default:
- printk(KERN_WARNING "%s: Invalid Rio Grande Table Version: %d\n", __FUNCTION__, rio_table_hdr->version);
- return 0;
- case 2:
- scal_detail_size = 11;
- rio_detail_size = 13;
- break;
- case 3:
- scal_detail_size = 12;
- rio_detail_size = 15;
- break;
- }
-
- ptr = (unsigned long)rio_table_hdr + 3;
- for(i = 0; i < rio_table_hdr->num_scal_dev; i++, ptr += scal_detail_size)
- scal_devs[i] = (struct scal_detail *)ptr;
-
- for(i = 0; i < rio_table_hdr->num_rio_dev; i++, ptr += rio_detail_size)
- rio_devs[i] = (struct rio_detail *)ptr;
-
- return 1;
-}
-
-void __init setup_summit(void)
-{
- unsigned long ptr;
- unsigned short offset;
- int i, next_wpeg, next_bus = 0;
-
- /* The pointer to the EBDA is stored in the word @ phys 0x40E(40:0E) */
- ptr = *(unsigned short *)phys_to_virt(0x40Eul);
- ptr = (unsigned long)phys_to_virt(ptr << 4);
-
- rio_table_hdr = NULL;
- offset = 0x180;
- while (offset){
- /* The block id is stored in the 2nd word */
- if (*((unsigned short *)(ptr + offset + 2)) == 0x4752){
- /* set the pointer past the offset & block id */
- rio_table_hdr = (struct rio_table_hdr *)(ptr + offset + 4);
- break;
- }
- /* The next offset is stored in the 1st word. 0 means no more */
- offset = *((unsigned short *)(ptr + offset));
- }
- if (!rio_table_hdr){
- printk(KERN_ERR "%s: Unable to locate Rio Grande Table in EBDA - bailing!\n", __FUNCTION__);
- return;
- }
-
- if (!build_detail_arrays())
- return;
-
- /* The first Winnipeg we're looking for has an index of 0 */
- next_wpeg = 0;
- do {
- for(i = 0; i < rio_table_hdr->num_rio_dev; i++){
- if (is_WPEG(rio_devs[i]) && rio_devs[i]->WP_index == next_wpeg){
- /* It's the Winnipeg we're looking for! */
- next_bus = setup_pci_node_map_for_wpeg(i, next_bus);
- next_wpeg++;
- break;
- }
- }
- /*
- * If we go through all Rio devices and don't find one with
- * the next index, it means we've found all the Winnipegs,
- * and thus all the PCI buses.
- */
- if (i == rio_table_hdr->num_rio_dev)
- next_wpeg = 0;
- } while (next_wpeg != 0);
-}
--- /dev/null
+/*
+ * arch/i386/kernel/summit.c - IBM Summit-Specific Code
+ *
+ * Written By: Matthew Dobson, IBM Corporation
+ *
+ * Copyright (c) 2003 IBM Corp.
+ *
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Send feedback to <colpatch@us.ibm.com>
+ *
+ */
+
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <asm/io.h>
+#include <asm/mach-summit/mach_mpparse.h>
+
+static struct rio_table_hdr *rio_table_hdr __initdata;
+static struct scal_detail *scal_devs[MAX_NUMNODES] __initdata;
+static struct rio_detail *rio_devs[MAX_NUMNODES*4] __initdata;
+
+static int __init setup_pci_node_map_for_wpeg(int wpeg_num, int last_bus)
+{
+ int twister = 0, node = 0;
+ int i, bus, num_buses;
+
+ for(i = 0; i < rio_table_hdr->num_rio_dev; i++){
+ if (rio_devs[i]->node_id == rio_devs[wpeg_num]->owner_id){
+ twister = rio_devs[i]->owner_id;
+ break;
+ }
+ }
+ if (i == rio_table_hdr->num_rio_dev){
+ printk(KERN_ERR "%s: Couldn't find owner Cyclone for Winnipeg!\n", __FUNCTION__);
+ return last_bus;
+ }
+
+ for(i = 0; i < rio_table_hdr->num_scal_dev; i++){
+ if (scal_devs[i]->node_id == twister){
+ node = scal_devs[i]->node_id;
+ break;
+ }
+ }
+ if (i == rio_table_hdr->num_scal_dev){
+ printk(KERN_ERR "%s: Couldn't find owner Twister for Cyclone!\n", __FUNCTION__);
+ return last_bus;
+ }
+
+ switch (rio_devs[wpeg_num]->type){
+ case CompatWPEG:
+ /* The Compatability Winnipeg controls the 2 legacy buses,
+ * the 66MHz PCI bus [2 slots] and the 2 "extra" buses in case
+ * a PCI-PCI bridge card is used in either slot: total 5 buses.
+ */
+ num_buses = 5;
+ break;
+ case AltWPEG:
+ /* The Alternate Winnipeg controls the 2 133MHz buses [1 slot
+ * each], their 2 "extra" buses, the 100MHz bus [2 slots] and
+ * the "extra" buses for each of those slots: total 7 buses.
+ */
+ num_buses = 7;
+ break;
+ case LookOutAWPEG:
+ case LookOutBWPEG:
+ /* A Lookout Winnipeg controls 3 100MHz buses [2 slots each]
+ * & the "extra" buses for each of those slots: total 9 buses.
+ */
+ num_buses = 9;
+ break;
+ default:
+ printk(KERN_INFO "%s: Unsupported Winnipeg type!\n", __FUNCTION__);
+ return last_bus;
+ }
+
+ for(bus = last_bus; bus < last_bus + num_buses; bus++)
+ mp_bus_id_to_node[bus] = node;
+ return bus;
+}
+
+static int __init build_detail_arrays(void)
+{
+ unsigned long ptr;
+ int i, scal_detail_size, rio_detail_size;
+
+ if (rio_table_hdr->num_scal_dev > MAX_NUMNODES){
+ printk(KERN_WARNING "%s: MAX_NUMNODES too low! Defined as %d, but system has %d nodes.\n", __FUNCTION__, MAX_NUMNODES, rio_table_hdr->num_scal_dev);
+ return 0;
+ }
+
+ switch (rio_table_hdr->version){
+ default:
+ printk(KERN_WARNING "%s: Invalid Rio Grande Table Version: %d\n", __FUNCTION__, rio_table_hdr->version);
+ return 0;
+ case 2:
+ scal_detail_size = 11;
+ rio_detail_size = 13;
+ break;
+ case 3:
+ scal_detail_size = 12;
+ rio_detail_size = 15;
+ break;
+ }
+
+ ptr = (unsigned long)rio_table_hdr + 3;
+ for(i = 0; i < rio_table_hdr->num_scal_dev; i++, ptr += scal_detail_size)
+ scal_devs[i] = (struct scal_detail *)ptr;
+
+ for(i = 0; i < rio_table_hdr->num_rio_dev; i++, ptr += rio_detail_size)
+ rio_devs[i] = (struct rio_detail *)ptr;
+
+ return 1;
+}
+
+void __init setup_summit(void)
+{
+ unsigned long ptr;
+ unsigned short offset;
+ int i, next_wpeg, next_bus = 0;
+
+ /* The pointer to the EBDA is stored in the word @ phys 0x40E(40:0E) */
+ ptr = *(unsigned short *)phys_to_virt(0x40Eul);
+ ptr = (unsigned long)phys_to_virt(ptr << 4);
+
+ rio_table_hdr = NULL;
+ offset = 0x180;
+ while (offset){
+ /* The block id is stored in the 2nd word */
+ if (*((unsigned short *)(ptr + offset + 2)) == 0x4752){
+ /* set the pointer past the offset & block id */
+ rio_table_hdr = (struct rio_table_hdr *)(ptr + offset + 4);
+ break;
+ }
+ /* The next offset is stored in the 1st word. 0 means no more */
+ offset = *((unsigned short *)(ptr + offset));
+ }
+ if (!rio_table_hdr){
+ printk(KERN_ERR "%s: Unable to locate Rio Grande Table in EBDA - bailing!\n", __FUNCTION__);
+ return;
+ }
+
+ if (!build_detail_arrays())
+ return;
+
+ /* The first Winnipeg we're looking for has an index of 0 */
+ next_wpeg = 0;
+ do {
+ for(i = 0; i < rio_table_hdr->num_rio_dev; i++){
+ if (is_WPEG(rio_devs[i]) && rio_devs[i]->WP_index == next_wpeg){
+ /* It's the Winnipeg we're looking for! */
+ next_bus = setup_pci_node_map_for_wpeg(i, next_bus);
+ next_wpeg++;
+ break;
+ }
+ }
+ /*
+ * If we go through all Rio devices and don't find one with
+ * the next index, it means we've found all the Winnipegs,
+ * and thus all the PCI buses.
+ */
+ if (i == rio_table_hdr->num_rio_dev)
+ next_wpeg = 0;
+ } while (next_wpeg != 0);
+}
projects / openwrt / staging / blogic.git / commitdiff