--- a/Makefile
+++ b/Makefile
-@@ -561,6 +561,9 @@ endif
+@@ -566,6 +566,9 @@ endif
NOSTDINC_FLAGS += -nostdinc -isystem $(shell $(CC) -print-file-name=include)
CHECKFLAGS += $(NOSTDINC_FLAGS)
select CRC32
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
-@@ -151,6 +151,7 @@ obj-$(CONFIG_SLHC) += slhc.o
+@@ -152,6 +152,7 @@ obj-$(CONFIG_SLHC) += slhc.o
obj-$(CONFIG_XEN_NETDEV_FRONTEND) += xen-netfront.o
obj-$(CONFIG_DUMMY) += dummy.o
--- a/drivers/input/misc/Kconfig
+++ b/drivers/input/misc/Kconfig
-@@ -227,4 +227,20 @@ config INPUT_PCF50633_PMU
- Say Y to include support for delivering PMU events via input
- layer on NXP PCF50633.
+@@ -250,4 +250,20 @@ config INPUT_RB532_BUTTON
+ To compile this driver as a module, choose M here: the
+ module will be called rb532_button.
+config INPUT_GPIO_BUTTONS
+ tristate "Polled GPIO buttons interface"
endif
--- a/drivers/input/misc/Makefile
+++ b/drivers/input/misc/Makefile
-@@ -22,3 +22,4 @@ obj-$(CONFIG_INPUT_UINPUT) += uinput.o
- obj-$(CONFIG_INPUT_APANEL) += apanel.o
- obj-$(CONFIG_INPUT_SGI_BTNS) += sgi_btns.o
- obj-$(CONFIG_INPUT_PCF50633_PMU) += pcf50633-input.o
+@@ -24,3 +24,4 @@ obj-$(CONFIG_INPUT_SPARCSPKR) += sparcs
+ obj-$(CONFIG_INPUT_UINPUT) += uinput.o
+ obj-$(CONFIG_INPUT_WISTRON_BTNS) += wistron_btns.o
+ obj-$(CONFIG_INPUT_YEALINK) += yealink.o
+obj-$(CONFIG_INPUT_GPIO_BUTTONS) += gpio_buttons.o
idx = phy_find_valid(idx, phydev->supported);
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
-@@ -477,6 +477,7 @@ void phy_start_machine(struct phy_device
+@@ -483,6 +483,7 @@ void phy_start_machine(struct phy_device
void phy_stop_machine(struct phy_device *phydev);
int phy_ethtool_sset(struct phy_device *phydev, struct ethtool_cmd *cmd);
int phy_ethtool_gset(struct phy_device *phydev, struct ethtool_cmd *cmd);
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
-@@ -84,6 +84,10 @@ config IP175C_PHY
- tristate "Driver for IC+ IP175C/IP178C switches"
- select SWCONFIG
+@@ -96,6 +96,10 @@ config ADM6996_PHY
+ config MVSWITCH_PHY
+ tristate "Driver for Marvell 88E6060 switches"
+config AR8216_PHY
+ tristate "Driver for Atheros AR8216 switches"
@@ -16,6 +16,7 @@ obj-$(CONFIG_ICPLUS_PHY) += icplus.o
obj-$(CONFIG_ADM6996_PHY) += adm6996.o
obj-$(CONFIG_MVSWITCH_PHY) += mvswitch.o
- obj-$(CONFIG_IP175C_PHY) += ip175c.o
-+obj-$(CONFIG_AR8216_PHY) += ar8216.o
obj-$(CONFIG_REALTEK_PHY) += realtek.o
++obj-$(CONFIG_AR8216_PHY) += ar8216.o
+ obj-$(CONFIG_LSI_ET1011C_PHY) += et1011c.o
obj-$(CONFIG_FIXED_PHY) += fixed.o
obj-$(CONFIG_MDIO_BITBANG) += mdio-bitbang.o
--- a/init/main.c
+++ b/init/main.c
-@@ -807,7 +807,7 @@ static noinline int init_post(void)
+@@ -812,7 +812,7 @@ static noinline int init_post(void)
numa_default_policy();
if (sys_open((const char __user *) "/dev/console", O_RDWR, 0) < 0)
+be done automatically.
--- a/MAINTAINERS
+++ b/MAINTAINERS
-@@ -1997,6 +1997,11 @@ L: linux-media@vger.kernel.org
- T: git kernel.org:/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
+@@ -2490,6 +2490,11 @@ T: git git://git.kernel.org/pub/scm/linu
S: Maintained
+ F: drivers/media/video/gspca/
+GPIOMMC DRIVER
+P: Michael Buesch
--- a/mm/shmem.c
+++ b/mm/shmem.c
-@@ -2587,6 +2587,16 @@ int shmem_unuse(swp_entry_t entry, struc
+@@ -2602,6 +2602,16 @@ int shmem_unuse(swp_entry_t entry, struc
/* common code */
/**
* shmem_file_setup - get an unlinked file living in tmpfs
* @name: name for dentry (to be seen in /proc/<pid>/maps
-@@ -2665,11 +2675,7 @@ int shmem_zero_setup(struct vm_area_stru
+@@ -2680,11 +2690,7 @@ int shmem_zero_setup(struct vm_area_stru
if (IS_ERR(file))
return PTR_ERR(file);
* macro override instead of weak attribute alias, to workaround
--- a/kernel/sched.c
+++ b/kernel/sched.c
-@@ -5600,6 +5600,7 @@ int can_nice(const struct task_struct *p
+@@ -5665,6 +5665,7 @@ int can_nice(const struct task_struct *p
return (nice_rlim <= p->signal->rlim[RLIMIT_NICE].rlim_cur ||
capable(CAP_SYS_NICE));
}