net: axienet: document device tree mdio child node

The mdio child node for the MDIO bus is generally required when using
this driver but was not documented other than being shown in the
example. Document it as an optional (but usually required) parameter.

Signed-off-by: Robert Hancock <hancock@sedsystems.ca>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/Documentation/devicetree/bindings/net/xilinx_axienet.txt b/Documentation/devicetree/bindings/net/xilinx_axienet.txt
index 0be335c7abede290a74967276f592a4471311acd..a8be67b425fd7db3185e5f9ac3efc1151ac956c8 100644 (file)
--- a/Documentation/devicetree/bindings/net/xilinx_axienet.txt
+++ b/Documentation/devicetree/bindings/net/xilinx_axienet.txt
@@ -37,6 +37,9 @@ Optional properties:
                  auto-detected from the CPU clock (but only on platforms where
                  this is possible). New device trees should specify this - the
                  auto detection is only for backward compatibility.
+ - mdio                : Child node for MDIO bus. Must be defined if PHY access is
+                 required through the core's MDIO interface (i.e. always,
+                 unless the PHY is accessed through a different bus).
 
 Example:
        axi_ethernet_eth: ethernet@40c00000 {