The DRA-1360 rev A is a wall-plug AC1300 repeater.
Hardware is identical (same FCC ID, black case instead of white)
to D-Link DAP-1620 rev B, which is already supported, but a
different model name, revision, and hardware ID are needed.
Thus, the bulk of the DAP-1620 device tree is extracted to a
common dtsi included by the two models' device trees.
Repeating specs and installation instructions from
e4c7703:
(note that the RAM size mentioned there was incorrect, oops)
Specs:
- SoC: MT7621AT (880MHz dual-core MIPS1004Kc)
- Memory: 128 MiB RAM, 16 MiB NOR SPI
- WiFi: MT7615DN 2x2 802.11n + 2x2 802.11ac (DBDC)
- Ethernet: 1 RJ45 port 10/100/1000
- Power/status LED: red+green
- LED RSSI bargraph: 2x green, 1x red+green
Installation:
- Keep reset button pressed during plug-in
- Web Recovery Updater is at 192.168.0.50
(pings are ignored, it listens only for http)
- Upload factory.bin, confirm flashing
(seems to work best with Chromium-based browsers)
Revert to OEM firmware:
- tail -c+117 DRA1360A1_FW112B03.bin | \
openssl aes-256-cbc -d -md md5 -out decrypted.bin \
-k
c471706398cb147c6619f8a04a18d53e9c17ede8
- flash decrypted.bin via D-Link Web Recovery
Signed-off-by: Rani Hod <rani.hod@gmail.com>
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-#include "mt7621.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
+#include "mt7621_dlink_dxx-1xx0-x1.dtsi"
/ {
compatible = "dlink,dap-1620-b1", "mediatek,mt7621-soc";
model = "D-Link DAP-1620 B1";
-
- aliases {
- label-mac-device = &gmac0;
-
- led-boot = &led_status_red;
- led-failsafe = &led_status_green;
- led-running = &led_status_green;
- led-upgrade = &led_status_red;
- };
-
- keys {
- compatible = "gpio-keys";
-
- reset {
- label = "reset";
- gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- debounce-interval = <60>;
- };
-
- wps {
- label = "wps";
- gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- led_status_red: status_red {
- label = "red:status";
- gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
- };
-
- led_status_green: status_green {
- label = "green:status";
- gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
- };
-
- rssi_low_red {
- label = "red:rssilow";
- gpios = <&gpio 25 GPIO_ACTIVE_LOW>;
- };
-
- rssi_low_green {
- label = "green:rssilow";
- gpios = <&gpio 24 GPIO_ACTIVE_LOW>;
- };
-
- rssi_med_green {
- label = "green:rssimed";
- gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
- };
-
- rssi_high_green {
- label = "green:rssihigh";
- gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
- };
- };
-};
-
-&spi0 {
- status = "okay";
-
- flash@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <50000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
-
- compatible = "nvmem-cells";
- #address-cells = <1>;
- #size-cells = <1>;
-
- macaddr_factory_e000: macaddr@e000 {
- reg = <0xe000 0x6>;
- };
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0xfb0000>;
- };
- };
- };
-};
-
-&pcie {
- status = "okay";
-};
-
-&pcie0 {
- wifi@0,0 {
- compatible = "mediatek,mt76";
- reg = <0x0000 0 0 0 0>;
- mediatek,mtd-eeprom = <&factory 0x0>;
- /* The correct MAC addresses are set in 10_fix_wifi_mac. */
- };
};
-
-&gmac0 {
- nvmem-cells = <&macaddr_factory_e000>;
- nvmem-cell-names = "mac-address";
-};
-
-&switch0 {
- ports {
- port@0 {
- status = "okay";
- label = "lan";
- };
- };
-};
-
-ðernet {
- pinctrl-0 = <&mdio_pins>, <&rgmii1_pins>;
-};
-
-&state_default {
- gpio {
- groups = "uart3", "jtag", "wdt";
- function = "gpio";
- };
-};
-
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "mt7621_dlink_dxx-1xx0-x1.dtsi"
+
+/ {
+ compatible = "dlink,dra-1360-a1", "mediatek,mt7621-soc";
+ model = "D-Link DRA-1360 A1";
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "mt7621.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ aliases {
+ label-mac-device = &gmac0;
+
+ led-boot = &led_status_red;
+ led-failsafe = &led_status_green;
+ led-running = &led_status_green;
+ led-upgrade = &led_status_red;
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ debounce-interval = <60>;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_status_red: status_red {
+ label = "red:status";
+ gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+ };
+
+ led_status_green: status_green {
+ label = "green:status";
+ gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+ };
+
+ rssi_low_red {
+ label = "red:rssilow";
+ gpios = <&gpio 25 GPIO_ACTIVE_LOW>;
+ };
+
+ rssi_low_green {
+ label = "green:rssilow";
+ gpios = <&gpio 24 GPIO_ACTIVE_LOW>;
+ };
+
+ rssi_med_green {
+ label = "green:rssimed";
+ gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
+ };
+
+ rssi_high_green {
+ label = "green:rssihigh";
+ gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&spi0 {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <50000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+
+ compatible = "nvmem-cells";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ macaddr_factory_e000: macaddr@e000 {
+ reg = <0xe000 0x6>;
+ };
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0xfb0000>;
+ };
+ };
+ };
+};
+
+&pcie {
+ status = "okay";
+};
+
+&pcie0 {
+ wifi@0,0 {
+ compatible = "mediatek,mt76";
+ reg = <0x0000 0 0 0 0>;
+ mediatek,mtd-eeprom = <&factory 0x0>;
+ /* The correct MAC addresses are set in 10_fix_wifi_mac. */
+ };
+};
+
+&gmac0 {
+ nvmem-cells = <&macaddr_factory_e000>;
+ nvmem-cell-names = "mac-address";
+};
+
+&switch0 {
+ ports {
+ port@0 {
+ status = "okay";
+ label = "lan";
+ };
+ };
+};
+
+ðernet {
+ pinctrl-0 = <&mdio_pins>, <&rgmii1_pins>;
+};
+
+&state_default {
+ gpio {
+ groups = "uart3", "jtag", "wdt";
+ function = "gpio";
+ };
+};
endef
TARGET_DEVICES += cudy_x6-v2
-define Device/dlink_dap-1620-b1
+define Device/dlink_dxx-1xx0-x1
DEVICE_VENDOR := D-Link
- DEVICE_MODEL := DAP-1620
- DEVICE_VARIANT := B1
DEVICE_PACKAGES := kmod-mt7615-firmware rssileds
- DLINK_HWID := MT76XMT7621-RP-PR2475-NA
IMAGE_SIZE := 16064k
IMAGES += factory.bin
IMAGE/factory.bin := $$(sysupgrade_bin) | \
append-string $$(DLINK_HWID) | \
check-size
endef
+
+define Device/dlink_dap-1620-b1
+ $(Device/dlink_dxx-1xx0-x1)
+ DEVICE_MODEL := DAP-1620
+ DEVICE_VARIANT := B1
+ DLINK_HWID := MT76XMT7621-RP-PR2475-NA
+endef
TARGET_DEVICES += dlink_dap-1620-b1
define Device/dlink_dap-x1860-a1
endef
TARGET_DEVICES += dlink_dir-882-r1
+define Device/dlink_dra-1360-a1
+ $(Device/dlink_dxx-1xx0-x1)
+ DEVICE_MODEL := DRA-1360
+ DEVICE_VARIANT := A1
+ DLINK_HWID := MT76XMT7621-RP-RA1360-NA
+endef
+TARGET_DEVICES += dlink_dra-1360-a1
+
define Device/dual-q_h721
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
xzwifi,creativebox-v1)
ucidef_set_led_netdev "internet" "internet" "blue:internet" "wan"
;;
-dlink,dap-1620-b1)
+dlink,dap-1620-b1|\
+dlink,dra-1360-a1)
ucidef_set_rssimon "wlan1" "200000" "1"
ucidef_set_led_rssi "rssilow" "RSSILOW" "red:rssilow" "wlan1" "1" "40"
ucidef_set_led_rssi "rssimediumlow" "RSSIMEDIUMLOW" "green:rssilow" "wlan1" "21" "100"
asus,rp-ac87|\
dlink,dap-1620-b1|\
dlink,dap-x1860-a1|\
+ dlink,dra-1360-a1|\
edimax,re23s|\
linksys,re7000|\
mikrotik,ltap-2hnd|\
macaddr_setbit_la "$(macaddr_add $hw_mac_addr 0x100000)" > /sys${DEVPATH}/macaddress
;;
dlink,dap-1620-b1|\
- dlink,dir-853-a1)
+ dlink,dir-853-a1|\
+ dlink,dra-1360-a1)
lan_mac_addr="$(mtd_get_mac_binary factory 0xe000)"
[ "$PHYNBR" = "0" ] && \
macaddr_add $lan_mac_addr 1 > /sys${DEVPATH}/macaddress
projects / openwrt / staging / xback.git / commitdiff