The proper model name is RP-WD03 (i.e. with the RP- prefix).
Adjust all names to that.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
--- /dev/null
+/dts-v1/;
+
+#include "mt7620n.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "ravpower,rp-wd03", "ralink,mt7620n-soc";
+ model = "RAVPower RP-WD03";
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ green-wifi {
+ label = "rp-wd03:green:wifi";
+ gpios = <&gpio2 0 GPIO_ACTIVE_HIGH>;
+ };
+
+ blue-wifi {
+ label = "rp-wd03:blue:wifi";
+ gpios = <&gpio3 0 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+};
+
+&gpio2 {
+ status = "okay";
+};
+
+&gpio3 {
+ status = "okay";
+};
+
+&i2c {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0x7b0000>;
+ };
+ };
+ };
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
+
+ðernet {
+ mtd-mac-address = <&factory 0x4000>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0x0>;
+};
+
+&state_default {
+ gpio {
+ groups = "wled", "ephy";
+ function = "gpio";
+ };
+};
+++ /dev/null
-/dts-v1/;
-
-#include "mt7620n.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "ravpower,wd03", "ralink,mt7620n-soc";
- model = "Ravpower WD03";
-
- chosen {
- bootargs = "console=ttyS0,115200";
- };
-
- leds {
- compatible = "gpio-leds";
-
- green-wifi {
- label = "wd03:green:wifi";
- gpios = <&gpio2 0 GPIO_ACTIVE_HIGH>;
- };
-
- blue-wifi {
- label = "wd03:blue:wifi";
- gpios = <&gpio3 0 GPIO_ACTIVE_HIGH>;
- };
- };
-
- keys {
- compatible = "gpio-keys";
-
- reset {
- label = "reset";
- gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-};
-
-&gpio2 {
- status = "okay";
-};
-
-&gpio3 {
- status = "okay";
-};
-
-&i2c {
- status = "okay";
-};
-
-&spi0 {
- status = "okay";
-
- flash@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0x7b0000>;
- };
- };
- };
-};
-
-&ehci {
- status = "okay";
-};
-
-&ohci {
- status = "okay";
-};
-
-ðernet {
- mtd-mac-address = <&factory 0x4000>;
-};
-
-&wmac {
- ralink,mtd-eeprom = <&factory 0x0>;
-};
-
-&state_default {
- gpio {
- groups = "wled", "ephy";
- function = "gpio";
- };
-};
endef
TARGET_DEVICES += ralink_mt7620a-v22sg-evb
-define Device/ravpower_wd03
+define Device/ravpower_rp-wd03
SOC := mt7620n
IMAGE_SIZE := 7872k
- DEVICE_VENDOR := Ravpower
- DEVICE_MODEL := WD03
+ DEVICE_VENDOR := RAVPower
+ DEVICE_MODEL := RP-WD03
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci
+ SUPPORTED_DEVICES += ravpower,wd03
DEFAULT := n
endef
-TARGET_DEVICES += ravpower_wd03
+TARGET_DEVICES += ravpower_rp-wd03
define Device/sanlinking_d240
SOC := mt7620a
planex,cs-qr10|\
planex,mzk-ex300np|\
planex,mzk-ex750np|\
- ravpower,wd03|\
+ ravpower,rp-wd03|\
sercomm,na930|\
tplink,re200-v1|\
tplink,re210-v1|\
netgear,wn3000rp-v3)
migrate_leds "^wn3000rpv3:=wn3000rp-v3:"
;;
+ravpower,rp-wd03)
+ migrate_leds "^wd03:=rp-wd03:"
+ ;;
tplink,archer-c2-v1)
migrate_leds "^c2-v1:=archer-c2-v1:"
;;