#include <asm/arch/gpio.h>
#include <asm/arch/io.h>
-#define RED_LED AT91_PIN_PC29 /* this is the power led */
-#define GREEN_LED AT91_PIN_PA10 /* this is the user1 led */
-#define YELLOW_LED AT91_PIN_PA11 /* this is the user1 led */
-
-void red_LED_on(void)
-{
- at91_set_gpio_value(RED_LED, 1);
-}
-
-void red_LED_off(void)
-{
- at91_set_gpio_value(RED_LED, 0);
-}
-
-void green_LED_on(void)
-{
- at91_set_gpio_value(GREEN_LED, 0);
-}
-
-void green_LED_off(void)
-{
- at91_set_gpio_value(GREEN_LED, 1);
-}
-
-void yellow_LED_on(void)
-{
- at91_set_gpio_value(YELLOW_LED, 0);
-}
-
-void yellow_LED_off(void)
-{
- at91_set_gpio_value(YELLOW_LED, 1);
-}
-
void coloured_LED_init(void)
{
/* Enable clock */
at91_sys_write(AT91_PMC_PCER, 1 << AT91CAP9_ID_PIOABCD);
- at91_set_gpio_output(RED_LED, 1);
- at91_set_gpio_output(GREEN_LED, 1);
- at91_set_gpio_output(YELLOW_LED, 1);
+ at91_set_gpio_output(CONFIG_RED_LED, 1);
+ at91_set_gpio_output(CONFIG_GREEN_LED, 1);
+ at91_set_gpio_output(CONFIG_YELLOW_LED, 1);
- at91_set_gpio_output(RED_LED, 0);
- at91_set_gpio_output(GREEN_LED, 1);
- at91_set_gpio_output(YELLOW_LED, 1);
+ at91_set_gpio_output(CONFIG_RED_LED, 0);
+ at91_set_gpio_output(CONFIG_GREEN_LED, 1);
+ at91_set_gpio_output(CONFIG_YELLOW_LED, 1);
}
#include <asm/arch/gpio.h>
#include <asm/arch/io.h>
-#define RED_LED AT91_PIN_PA9 /* this is the power led */
-#define GREEN_LED AT91_PIN_PA6 /* this is the user led */
-
-void red_LED_on(void)
-{
- at91_set_gpio_value(RED_LED, 1);
-}
-
-void red_LED_off(void)
-{
- at91_set_gpio_value(RED_LED, 0);
-}
-
-void green_LED_on(void)
-{
- at91_set_gpio_value(GREEN_LED, 0);
-}
-
-void green_LED_off(void)
-{
- at91_set_gpio_value(GREEN_LED, 1);
-}
-
void coloured_LED_init(void)
{
/* Enable clock */
at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_PIOA);
- at91_set_gpio_output(RED_LED, 1);
- at91_set_gpio_output(GREEN_LED, 1);
+ at91_set_gpio_output(CONFIG_RED_LED, 1);
+ at91_set_gpio_output(CONFIG_GREEN_LED, 1);
- at91_set_gpio_value(RED_LED, 0);
- at91_set_gpio_value(GREEN_LED, 1);
+ at91_set_gpio_value(CONFIG_RED_LED, 0);
+ at91_set_gpio_value(CONFIG_GREEN_LED, 1);
}
#include <asm/arch/gpio.h>
#include <asm/arch/io.h>
-#define RED_LED AT91_PIN_PA23 /* this is the power led */
-#define GREEN_LED AT91_PIN_PA13 /* this is the user1 led */
-#define YELLOW_LED AT91_PIN_PA14 /* this is the user2 led */
-
-void red_LED_on(void)
-{
- at91_set_gpio_value(RED_LED, 1);
-}
-
-void red_LED_off(void)
-{
- at91_set_gpio_value(RED_LED, 0);
-}
-
-void green_LED_on(void)
-{
- at91_set_gpio_value(GREEN_LED, 0);
-}
-
-void green_LED_off(void)
-{
- at91_set_gpio_value(GREEN_LED, 1);
-}
-
-void yellow_LED_on(void)
-{
- at91_set_gpio_value(YELLOW_LED, 0);
-}
-
-void yellow_LED_off(void)
-{
- at91_set_gpio_value(YELLOW_LED, 1);
-}
-
-
void coloured_LED_init(void)
{
/* Enable clock */
at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9261_ID_PIOA);
- at91_set_gpio_output(RED_LED, 1);
- at91_set_gpio_output(GREEN_LED, 1);
- at91_set_gpio_output(YELLOW_LED, 1);
+ at91_set_gpio_output(CONFIG_RED_LED, 1);
+ at91_set_gpio_output(CONFIG_GREEN_LED, 1);
+ at91_set_gpio_output(CONFIG_YELLOW_LED, 1);
- at91_set_gpio_value(RED_LED, 0);
- at91_set_gpio_value(GREEN_LED, 1);
- at91_set_gpio_value(YELLOW_LED, 1);
+ at91_set_gpio_value(CONFIG_RED_LED, 0);
+ at91_set_gpio_value(CONFIG_GREEN_LED, 1);
+ at91_set_gpio_value(CONFIG_YELLOW_LED, 1);
}
#include <asm/arch/gpio.h>
#include <asm/arch/io.h>
-#define RED_LED AT91_PIN_PB7 /* this is the power led */
-#define GREEN_LED AT91_PIN_PB8 /* this is the user1 led */
-#define YELLOW_LED AT91_PIN_PC29 /* this is the user2 led */
-
-void red_LED_on(void)
-{
- at91_set_gpio_value(RED_LED, 1);
-}
-
-void red_LED_off(void)
-{
- at91_set_gpio_value(RED_LED, 0);
-}
-
-void green_LED_on(void)
-{
- at91_set_gpio_value(GREEN_LED, 0);
-}
-
-void green_LED_off(void)
-{
- at91_set_gpio_value(GREEN_LED, 1);
-}
-
-void yellow_LED_on(void)
-{
- at91_set_gpio_value(YELLOW_LED, 0);
-}
-
-void yellow_LED_off(void)
-{
- at91_set_gpio_value(YELLOW_LED, 1);
-}
-
void coloured_LED_init(void)
{
/* Enable clock */
at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9263_ID_PIOB |
1 << AT91SAM9263_ID_PIOCDE);
- at91_set_gpio_output(RED_LED, 1);
- at91_set_gpio_output(GREEN_LED, 1);
- at91_set_gpio_output(YELLOW_LED, 1);
+ at91_set_gpio_output(CONFIG_RED_LED, 1);
+ at91_set_gpio_output(CONFIG_GREEN_LED, 1);
+ at91_set_gpio_output(CONFIG_YELLOW_LED, 1);
- at91_set_gpio_value(RED_LED, 0);
- at91_set_gpio_value(GREEN_LED, 1);
- at91_set_gpio_value(YELLOW_LED, 1);
+ at91_set_gpio_value(CONFIG_RED_LED, 0);
+ at91_set_gpio_value(CONFIG_GREEN_LED, 1);
+ at91_set_gpio_value(CONFIG_YELLOW_LED, 1);
}
#include <asm/arch/gpio.h>
#include <asm/arch/io.h>
-#define RED_LED AT91_PIN_PD14 /* this is the power led */
-#define GREEN_LED AT91_PIN_PD15 /* this is the user1 led */
-#define YELLOW_LED AT91_PIN_PD16 /* this is the user2 led */
-
-void red_LED_on(void)
-{
- at91_set_gpio_value(RED_LED, 1);
-}
-
-void red_LED_off(void)
-{
- at91_set_gpio_value(RED_LED, 0);
-}
-
-void green_LED_on(void)
-{
- at91_set_gpio_value(GREEN_LED, 0);
-}
-
-void green_LED_off(void)
-{
- at91_set_gpio_value(GREEN_LED, 1);
-}
-
-void yellow_LED_on(void)
-{
- at91_set_gpio_value(YELLOW_LED, 0);
-}
-
-void yellow_LED_off(void)
-{
- at91_set_gpio_value(YELLOW_LED, 1);
-}
-
void coloured_LED_init(void)
{
/* Enable clock */
at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9RL_ID_PIOD);
- at91_set_gpio_output(RED_LED, 1);
- at91_set_gpio_output(GREEN_LED, 1);
- at91_set_gpio_output(YELLOW_LED, 1);
+ at91_set_gpio_output(CONFIG_RED_LED, 1);
+ at91_set_gpio_output(CONFIG_GREEN_LED, 1);
+ at91_set_gpio_output(CONFIG_YELLOW_LED, 1);
- at91_set_gpio_value(RED_LED, 0);
- at91_set_gpio_value(GREEN_LED, 1);
- at91_set_gpio_value(YELLOW_LED, 1);
+ at91_set_gpio_value(CONFIG_RED_LED, 0);
+ at91_set_gpio_value(CONFIG_GREEN_LED, 1);
+ at91_set_gpio_value(CONFIG_YELLOW_LED, 1);
}
COBJS-y += at91sam9rl_serial.o
COBJS-$(CONFIG_HAS_DATAFLASH) += at91sam9rl_spi.o
endif
+COBJS-$(CONFIG_AT91_LED) += led.o
COBJS-$(CONFIG_HAS_DATAFLASH) += spi.o
COBJS-y += timer.o
COBJS-y += usb.o
--- /dev/null
+/*
+ * (C) Copyright 2007-2008
+ * Stelian Pop <stelian.pop@leadtechdesign.com>
+ * Lead Tech Design <www.leadtechdesign.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/io.h>
+
+#ifdef CONFIG_RED_LED
+void red_LED_on(void)
+{
+ at91_set_gpio_value(CONFIG_RED_LED, 1);
+}
+
+void red_LED_off(void)
+{
+ at91_set_gpio_value(CONFIG_RED_LED, 0);
+}
+#endif
+
+#ifdef CONFIG_GREEN_LED
+void green_LED_on(void)
+{
+ at91_set_gpio_value(CONFIG_GREEN_LED, 0);
+}
+
+void green_LED_off(void)
+{
+ at91_set_gpio_value(CONFIG_GREEN_LED, 1);
+}
+#endif
+
+#ifdef CONFIG_YELLOW_LED
+void yellow_LED_on(void)
+{
+ at91_set_gpio_value(CONFIG_YELLOW_LED, 0);
+}
+
+void yellow_LED_off(void)
+{
+ at91_set_gpio_value(CONFIG_YELLOW_LED, 1);
+}
+#endif
#define CONFIG_ATMEL_LCD_BGR555 1
#define CONFIG_SYS_CONSOLE_IS_IN_ENV 1
+/* LED */
+#define CONFIG_AT91_LED
+#define CONFIG_RED_LED AT91_PIN_PC29 /* this is the power led */
+#define CONFIG_GREEN_LED AT91_PIN_PA10 /* this is the user1 led */
+#define CONFIG_YELLOW_LED AT91_PIN_PA11 /* this is the user1 led */
+
#define CONFIG_BOOTDELAY 3
/*
#undef CONFIG_USART2
#define CONFIG_USART3 1 /* USART 3 is DBGU */
+/* LED */
+#define CONFIG_AT91_LED
+#define CONFIG_RED_LED AT91_PIN_PA9 /* this is the power led */
+#define CONFIG_GREEN_LED AT91_PIN_PA6 /* this is the user led */
+
#define CONFIG_BOOTDELAY 3
/*
#define CONFIG_ATMEL_LCD_BGR555 1
#define CONFIG_SYS_CONSOLE_IS_IN_ENV 1
+/* LED */
+#define CONFIG_AT91_LED
+#define CONFIG_RED_LED AT91_PIN_PA23 /* this is the power led */
+#define CONFIG_GREEN_LED AT91_PIN_PA13 /* this is the user1 led */
+#define CONFIG_YELLOW_LED AT91_PIN_PA14 /* this is the user2 led */
+
#define CONFIG_BOOTDELAY 3
/*
#define CONFIG_ATMEL_LCD_BGR555 1
#define CONFIG_SYS_CONSOLE_IS_IN_ENV 1
+/* LED */
+#define CONFIG_AT91_LED
+#define CONFIG_RED_LED AT91_PIN_PB7 /* this is the power led */
+#define CONFIG_GREEN_LED AT91_PIN_PB8 /* this is the user1 led */
+#define CONFIG_YELLOW_LED AT91_PIN_PC29 /* this is the user2 led */
+
#define CONFIG_BOOTDELAY 3
/*
#define CONFIG_ATMEL_LCD_RGB565 1
#define CONFIG_SYS_CONSOLE_IS_IN_ENV 1
+/* LED */
+#define CONFIG_AT91_LED
+#define CONFIG_RED_LED AT91_PIN_PD14 /* this is the power led */
+#define CONFIG_GREEN_LED AT91_PIN_PD15 /* this is the user1 led */
+#define CONFIG_YELLOW_LED AT91_PIN_PD16 /* this is the user2 led */
+
#define CONFIG_BOOTDELAY 3
/*