net: phy: at803x: Clean up duplicate register definitions

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c
index 333c1bc799293adf788c502616df55be0b239098..f2c4e8df833c992a1395c50e33149ec354b8da16 100644 (file)
--- a/drivers/net/phy/at803x.c
+++ b/drivers/net/phy/at803x.c
@@ -20,9 +20,12 @@
 #include <linux/gpio/consumer.h>
 
 #define AT803X_INTR_ENABLE                     0x12
+#define AT803X_INTR_ENABLE_INIT                        0xec00
 #define AT803X_INTR_STATUS                     0x13
+
 #define AT803X_SMART_SPEED                     0x14
 #define AT803X_LED_CONTROL                     0x18
+
 #define AT803X_WOL_ENABLE                      0x01
 #define AT803X_DEVICE_ADDR                     0x03
 #define AT803X_LOC_MAC_ADDR_0_15_OFFSET                0x804C
@@ -31,13 +34,13 @@
 #define AT803X_MMD_ACCESS_CONTROL              0x0D
 #define AT803X_MMD_ACCESS_CONTROL_DATA         0x0E
 #define AT803X_FUNC_DATA                       0x4003
-#define AT803X_INER                            0x0012
-#define AT803X_INER_INIT                       0xec00
-#define AT803X_INSR                            0x0013
+
 #define AT803X_DEBUG_ADDR                      0x1D
 #define AT803X_DEBUG_DATA                      0x1E
+
 #define AT803X_DEBUG_REG_0                     0x00
 #define AT803X_DEBUG_RX_CLK_DLY_EN             BIT(15)
+
 #define AT803X_DEBUG_REG_5                     0x05
 #define AT803X_DEBUG_TX_CLK_DLY_EN             BIT(8)
 
@@ -280,7 +283,7 @@ static int at803x_ack_interrupt(struct phy_device *phydev)
 {
        int err;
 
-       err = phy_read(phydev, AT803X_INSR);
+       err = phy_read(phydev, AT803X_INTR_STATUS);
 
        return (err < 0) ? err : 0;
 }
@@ -290,13 +293,13 @@ static int at803x_config_intr(struct phy_device *phydev)
        int err;
        int value;
 
-       value = phy_read(phydev, AT803X_INER);
+       value = phy_read(phydev, AT803X_INTR_ENABLE);
 
        if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
-               err = phy_write(phydev, AT803X_INER,
-                               value | AT803X_INER_INIT);
+               err = phy_write(phydev, AT803X_INTR_ENABLE,
+                               value | AT803X_INTR_ENABLE_INIT);
        else
-               err = phy_write(phydev, AT803X_INER, 0);
+               err = phy_write(phydev, AT803X_INTR_ENABLE, 0);
 
        return err;
 }