+++ /dev/null
-#
-# Copyright (C) 2006 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-include $(TOPDIR)/rules.mk
-
-ARCH:=mipsel
-BOARD:=rb1xx
-BOARDNAME:=Microtik RouterBoard 1xx
-FEATURES:=squashfs jffs2 broken
-
-define Target/Description
- Build firmware images for ADMTek ADM5120 based boards
- (e.g : RouterBoard RB1xx (111,112,133,153)
-endef
-
-include $(INCLUDE_DIR)/kernel-build.mk
-
-# include the profiles
--include profiles/*.mk
-
-$(eval $(call BuildKernel))
+++ /dev/null
-CONFIG_32BIT=y
-# CONFIG_64BIT is not set
-# CONFIG_64BIT_PHYS_ADDR is not set
-CONFIG_ADM5120_GPIO=y
-CONFIG_ADM5120_NR_UARTS=2
-CONFIG_BASE_SMALL=0
-CONFIG_BAYCOM_SER_FDX=m
-CONFIG_BAYCOM_SER_HDX=m
-CONFIG_BINFMT_MISC=m
-# CONFIG_BLK_DEV_CF_MIPS is not set
-CONFIG_CIFS_DEBUG2=y
-CONFIG_CIFS_EXPERIMENTAL=y
-CONFIG_CIFS_STATS2=y
-CONFIG_CIFS_WEAK_PW_HASH=y
-CONFIG_CIFS_XATTR=y
-CONFIG_CMDLINE="console=ttyS0,115200 rootfs=jffs2,squashfs init=/etc/preinit"
-# CONFIG_CPU_BIG_ENDIAN is not set
-CONFIG_CPU_HAS_LLSC=y
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_CPU_LITTLE_ENDIAN=y
-CONFIG_CPU_MIPS32=y
-CONFIG_CPU_MIPS32_R1=y
-# CONFIG_CPU_MIPS32_R2 is not set
-# CONFIG_CPU_MIPS64_R1 is not set
-# CONFIG_CPU_MIPS64_R2 is not set
-CONFIG_CPU_MIPSR1=y
-# CONFIG_CPU_NEVADA is not set
-# CONFIG_CPU_R10000 is not set
-# CONFIG_CPU_R3000 is not set
-# CONFIG_CPU_R4300 is not set
-# CONFIG_CPU_R4X00 is not set
-# CONFIG_CPU_R5000 is not set
-# CONFIG_CPU_R5432 is not set
-# CONFIG_CPU_R6000 is not set
-# CONFIG_CPU_R8000 is not set
-# CONFIG_CPU_RM7000 is not set
-# CONFIG_CPU_RM9000 is not set
-# CONFIG_CPU_SB1 is not set
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-# CONFIG_CPU_TX39XX is not set
-# CONFIG_CPU_TX49XX is not set
-# CONFIG_CPU_VR41XX is not set
-CONFIG_CRYPTO_SHA1=y
-# CONFIG_DDB5477 is not set
-# CONFIG_DM9000 is not set
-CONFIG_DMA_NEED_PCI_MAP_STATE=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_ELF_CORE=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-CONFIG_EXT3_FS_XATTR=y
-CONFIG_FIRMWARE_EDID=y
-CONFIG_FS_MBCACHE=m
-CONFIG_FS_POSIX_ACL=y
-CONFIG_GENERIC_ACL=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-# CONFIG_GEN_RTC is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_DEBUG_CHIP is not set
-CONFIG_HW_HAS_PCI=y
-CONFIG_HW_RANDOM=y
-CONFIG_HZ=250
-# CONFIG_HZ_100 is not set
-# CONFIG_HZ_1024 is not set
-# CONFIG_HZ_128 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_256 is not set
-# CONFIG_HZ_48 is not set
-# CONFIG_I2C is not set
-# CONFIG_IDE is not set
-CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
-CONFIG_INET_XFRM_MODE_BEET=m
-CONFIG_INET_XFRM_MODE_TRANSPORT=m
-CONFIG_INET_XFRM_MODE_TUNNEL=m
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-CONFIG_INPUT=y
-# CONFIG_INPUT_EVDEV is not set
-CONFIG_IPV6_MIP6=y
-CONFIG_IPV6_PRIVACY=y
-CONFIG_IPV6_ROUTE_INFO=y
-CONFIG_IPV6_TUNNEL=m
-CONFIG_IP_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_NETBIOS_NS=m
-CONFIG_IP_NF_TARGET_CLUSTERIP=m
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_POSIX_ACL=y
-CONFIG_JFFS2_FS_SECURITY=y
-CONFIG_JFFS2_FS_XATTR=y
-CONFIG_JFFS2_SUMMARY=y
-# CONFIG_JOLIET is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_VR41XX is not set
-CONFIG_MII=m
-# CONFIG_MINIX_FS is not set
-CONFIG_MINI_FO=y
-CONFIG_MIPS=y
-CONFIG_MIPS_ADM5120=y
-CONFIG_MIPS_ADM5120_ENET=y
-# CONFIG_MIPS_ATLAS is not set
-# CONFIG_MIPS_BOSPORUS is not set
-# CONFIG_MIPS_COBALT is not set
-# CONFIG_MIPS_DB1000 is not set
-# CONFIG_MIPS_DB1100 is not set
-# CONFIG_MIPS_DB1200 is not set
-# CONFIG_MIPS_DB1500 is not set
-# CONFIG_MIPS_DB1550 is not set
-# CONFIG_MIPS_EV64120 is not set
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-# CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_MIRAGE is not set
-# CONFIG_MIPS_MTX1 is not set
-CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMP is not set
-# CONFIG_MIPS_MT_SMTC is not set
-# CONFIG_MIPS_PB1000 is not set
-# CONFIG_MIPS_PB1100 is not set
-# CONFIG_MIPS_PB1200 is not set
-# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_PB1550 is not set
-# CONFIG_MIPS_SEAD is not set
-# CONFIG_MIPS_SIM is not set
-# CONFIG_MIPS_VPE_LOADER is not set
-# CONFIG_MIPS_XXS1500 is not set
-CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-CONFIG_MTD=y
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_ADM5120 is not set
-CONFIG_MTD_BLOCK=y
-# CONFIG_MTD_BLOCK2MTD is not set
-# CONFIG_MTD_CFI is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-CONFIG_MTD_CHAR=y
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_CONCAT is not set
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_MYLOADER_PARTS is not set
-CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_NANDSIM is not set
-CONFIG_MTD_NAND_RB500=y
-CONFIG_MTD_NAND_VERIFY_WRITE=y
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
-# CONFIG_MTD_ONENAND is not set
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_PLATRAM is not set
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_SLRAM is not set
-CONFIG_NETFILTER_XT_MATCH_QUOTA=m
-CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
-# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
-CONFIG_NET_ACT_SIMP=m
-CONFIG_NET_KEY=y
-# CONFIG_NET_PCI is not set
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_PAGE_SIZE_16KB is not set
-CONFIG_PAGE_SIZE_4KB=y
-# CONFIG_PAGE_SIZE_64KB is not set
-# CONFIG_PAGE_SIZE_8KB is not set
-# CONFIG_PARTITION_ADVANCED is not set
-# CONFIG_PCIPCWATCHDOG is not set
-CONFIG_PCI_ADM5120=y
-# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_PNX8550_JBS is not set
-# CONFIG_PNX8550_V2PCI is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_RTC is not set
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-# CONFIG_SENSORS_ABITUGURU is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SERIAL_8250 is not set
-CONFIG_SERIAL_ADM5120=y
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_RAW is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SGI_IP22 is not set
-# CONFIG_SGI_IP27 is not set
-# CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_CRHINE is not set
-# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
-# CONFIG_SIBYTE_PTSWARM is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_SWARM is not set
-CONFIG_SOFT_WATCHDOG=m
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SYN_COOKIES=y
-CONFIG_SYS_HAS_CPU_MIPS32_R1=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-CONFIG_TMPFS_POSIX_ACL=y
-# CONFIG_TOSHIBA_JMR3927 is not set
-# CONFIG_TOSHIBA_RBTX4927 is not set
-# CONFIG_TOSHIBA_RBTX4938 is not set
-CONFIG_TRAD_SIGNALS=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_USB is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED=y
-CONFIG_YAFFS_AUTO_YAFFS2=y
-# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set
-# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set
-CONFIG_YAFFS_DOES_ECC=y
-CONFIG_YAFFS_ECC_WRONG_ORDER=y
-CONFIG_YAFFS_FS=y
-CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
-CONFIG_YAFFS_YAFFS1=y
-CONFIG_YAFFS_YAFFS2=y
+++ /dev/null
-#
-# Makefile for the ADMtek ADM5120 SoC specific parts of the kernel
-#
-
-obj-y := setup.o prom.o irq.o memory.o mipsIRQ.o adm5120_info.o
-
-EXTRA_AFLAGS := $(CFLAGS)
+++ /dev/null
-/*
- * $Id$
- *
- * Copyright (C) 2007 OpenWrt.org
- * Copyright (C) 2007 Gabor Juhos <juhosg@freemail.hu>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#include <linux/types.h>
-#include <linux/autoconf.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-
-#include <asm/bootinfo.h>
-#include <asm/addrspace.h>
-
-#include <adm5120_info.h>
-#include <adm5120_defs.h>
-#include <adm5120_switch.h>
-#include <myloader.h>
-
-/* boot loaders specific definitions */
-#define CFE_EPTSEAL 0x43464531 /* CFE1 is the magic number to recognize CFE from other bootloaders */
-
-struct adm5120_info adm5120_info = {
- .cpu_speed = CPU_SPEED_175,
- .cpu_package = CPU_PACKAGE_PQFP,
- .boot_loader = BOOT_LOADER_UNKNOWN,
- .board_type = BOARD_TYPE_UNKNOWN
-};
-
-static char *boot_loader_names[BOOT_LOADER_LAST+1] = {
- [BOOT_LOADER_UNKNOWN] = "Unknown",
- [BOOT_LOADER_CFE] = "CFE",
- [BOOT_LOADER_UBOOT] = "U-Boot",
- [BOOT_LOADER_MYLOADER] = "MyLoader"
-};
-
-/*
- * CPU settings detection
- */
-#define CODE_GET_PC(c) ((c) & CODE_PC_MASK)
-#define CODE_GET_REV(c) (((c) >> CODE_REV_SHIFT) & CODE_REV_MASK)
-#define CODE_GET_PK(c) (((c) >> CODE_PK_SHIFT) & CODE_PK_MASK)
-#define CODE_GET_CLKS(c) (((c) >> CODE_CLKS_SHIFT) & CODE_CLKS_MASK)
-#define CODE_GET_NAB(c) (((c) & CODE_NAB) != 0)
-
-static void __init detect_cpu_info(void)
-{
- uint32_t *reg;
- uint32_t code;
- uint32_t clks;
-
- reg = (uint32_t *)KSEG1ADDR(ADM5120_SWITCH_BASE+SWITCH_REG_CODE);
- code = *reg;
-
- clks = CODE_GET_CLKS(code);
-
- adm5120_info.product_code = CODE_GET_PC(code);
- adm5120_info.revision = CODE_GET_REV(code);
-
- adm5120_info.cpu_speed = CPU_SPEED_175;
- if (clks & 1)
- adm5120_info.cpu_speed += 25000000;
- if (clks & 2)
- adm5120_info.cpu_speed += 50000000;
-
- adm5120_info.cpu_package = (CODE_GET_PK(code) == CODE_PK_BGA) ?
- CPU_PACKAGE_BGA : CPU_PACKAGE_PQFP;
-
- adm5120_info.nand_boot = CODE_GET_NAB(code);
-
-}
-
-/*
- * Boot loader detection routines
- */
-static int __init detect_cfe(void)
-{
- /*
- * This method only works, when we are booted directly from the CFE.
- */
- uint32_t cfe_handle = (uint32_t) fw_arg0;
- uint32_t cfe_a1_val = (uint32_t) fw_arg1;
- uint32_t cfe_entry = (uint32_t) fw_arg2;
- uint32_t cfe_seal = (uint32_t) fw_arg3;
-
- /* Check for CFE by finding the CFE magic number */
- if (cfe_seal != CFE_EPTSEAL) {
- /* We are not booted from CFE */
- return 0;
- }
-
- /* cfe_a1_val must be 0, because only one CPU present in the ADM5120 SoC */
- if (cfe_a1_val != 0) {
- return 0;
- }
-
- /* The cfe_handle, and the cfe_entry must be kernel mode addresses */
- if ((cfe_handle < KSEG0) || (cfe_entry < KSEG0)) {
- return 0;
- }
-
- return 1;
-}
-
-static int __init detect_uboot(void)
-{
- /* FIXME: not yet implemented */
- return 0;
-}
-
-static int __init detect_myloader(void)
-{
- struct mylo_system_params *sysp;
- struct mylo_board_params *boardp;
- struct mylo_partition_table *parts;
-
- sysp = (struct mylo_system_params *)(MYLO_MIPS_SYS_PARAMS);
- boardp = (struct mylo_board_params *)(MYLO_MIPS_BOARD_PARAMS);
- parts = (struct mylo_partition_table *)(MYLO_MIPS_PARTITIONS);
-
- /* Check for some magic numbers */
- if ((sysp->magic != MYLO_MAGIC_SYS_PARAMS) ||
- (boardp->magic != MYLO_MAGIC_BOARD_PARAMS) ||
- (parts->magic != MYLO_MAGIC_PARTITIONS))
- return 0;
-
- return 1;
-}
-
-static int __init detect_routerboot(void)
-{
- /* FIXME: not yet implemented */
- return 0;
-}
-
-static int __init detect_bootloader(void)
-{
- if (detect_cfe())
- return BOOT_LOADER_CFE;
-
- if (detect_uboot())
- return BOOT_LOADER_UBOOT;
-
- if (detect_myloader())
- return BOOT_LOADER_MYLOADER;
-
- if (detect_routerboot())
- return BOOT_LOADER_ROUTERBOOT;
-
- return BOOT_LOADER_UNKNOWN;
-}
-
-/*
- * Board detection
- */
-static void __init detect_board_type(void)
-{
- /* FIXME: not yet implemented */
-}
-
-void __init adm5120_info_show(void)
-{
- printk("ADM%04X%s revision %d, running at %ldMHz\n",
- adm5120_info.product_code,
- (adm5120_info.cpu_package == CPU_PACKAGE_BGA) ? "" : "P",
- adm5120_info.revision,
- (adm5120_info.cpu_speed / 1000000)
- );
- printk("Boot loader is: %s\n", boot_loader_names[adm5120_info.boot_loader]);
- printk("Booted from : %s flash\n", adm5120_info.nand_boot ? "NAND" : "NOR");
-}
-
-void __init adm5120_info_init(void)
-{
- detect_cpu_info();
- adm5120_info.boot_loader = detect_bootloader();
- detect_board_type();
-
- adm5120_info_show();
-}
+++ /dev/null
-/*
- * Copyright (C) ADMtek Incorporated.
- * Creator : daniell@admtek.com.tw
- * Carsten Langgaard, carstenl@mips.com
- * Copyright (C) 2000, 2001 MIPS Technologies, Inc.
- * Copyright (C) 2001 Ralf Baechle
- * Copyright (C) 2005 Jeroen Vreeken (pe1rxq@amsat.org)
- */
-
-#include <linux/autoconf.h>
-#include <linux/init.h>
-#include <linux/kernel_stat.h>
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/slab.h>
-#include <linux/random.h>
-#include <linux/pm.h>
-
-#include <asm/irq.h>
-#include <asm/time.h>
-#include <asm/mipsregs.h>
-#include <asm/gdb-stub.h>
-#include <asm/irq_cpu.h>
-
-#define MIPS_CPU_TIMER_IRQ 7
-
-extern int setup_irq(unsigned int irq, struct irqaction *irqaction);
-extern irq_desc_t irq_desc[];
-extern asmlinkage void mipsIRQ(void);
-
-int mips_int_lock(void);
-void mips_int_unlock(int);
-
-unsigned int mips_counter_frequency;
-
-#define ADM5120_INTC_REG(reg) (*(volatile u32 *)(KSEG1ADDR(0x12200000+(reg))))
-#define ADM5120_INTC_STATUS ADM5120_INTC_REG(0x00)
-#define ADM5120_INTC_ENABLE ADM5120_INTC_REG(0x08)
-#define ADM5120_INTC_DISABLE ADM5120_INTC_REG(0x0c)
-#define ADM5120_IRQ_MAX 9
-#define ADM5120_IRQ_MASK 0x3ff
-
-void adm5120_hw0_irqdispatch(struct pt_regs *regs)
-{
- unsigned long intsrc;
- int i;
-
- intsrc = ADM5120_INTC_STATUS & ADM5120_IRQ_MASK;
-
- for (i = 0; intsrc; intsrc >>= 1, i++)
- if (intsrc & 0x1)
- do_IRQ(i);
- else
- spurious_interrupt();
-}
-
-void mips_timer_interrupt(struct pt_regs *regs)
-{
- write_c0_compare(read_c0_count()+ mips_counter_frequency/HZ);
- ll_timer_interrupt(MIPS_CPU_TIMER_IRQ);
-}
-
-/* Main interrupt dispatcher */
-asmlinkage void plat_irq_dispatch(struct pt_regs *regs)
-{
- unsigned int cp0_cause = read_c0_cause() & read_c0_status();
-
- if (cp0_cause & CAUSEF_IP7) {
- mips_timer_interrupt( regs);
- } else if (cp0_cause & CAUSEF_IP2) {
- adm5120_hw0_irqdispatch( regs);
- }
-}
-
-void enable_adm5120_irq(unsigned int irq)
-{
- int s;
-
- /* Disable all interrupts (FIQ/IRQ) */
- s = mips_int_lock();
-
- if ((irq < 0) || (irq > ADM5120_IRQ_MAX))
- goto err_exit;
-
- ADM5120_INTC_ENABLE = (1<<irq);
-
-err_exit:
-
- /* Restore the interrupts states */
- mips_int_unlock(s);
-}
-
-
-void disable_adm5120_irq(unsigned int irq)
-{
- int s;
-
- /* Disable all interrupts (FIQ/IRQ) */
- s = mips_int_lock();
-
- if ((irq < 0) || (irq > ADM5120_IRQ_MAX))
- goto err_exit;
-
- ADM5120_INTC_DISABLE = (1<<irq);
-
-err_exit:
- /* Restore the interrupts states */
- mips_int_unlock(s);
-}
-
-unsigned int startup_adm5120_irq(unsigned int irq)
-{
- enable_adm5120_irq(irq);
- return 0;
-}
-
-void shutdown_adm5120_irq(unsigned int irq)
-{
- disable_adm5120_irq(irq);
-}
-
-static inline void ack_adm5120_irq(unsigned int irq_nr)
-{
- ADM5120_INTC_DISABLE = (1 << irq_nr);
-}
-
-
-static void end_adm5120_irq(unsigned int irq_nr)
-{
- ADM5120_INTC_ENABLE = (1 << irq_nr);
-}
-
-static hw_irq_controller adm5120_irq_type = {
- .typename = "MIPS",
- .startup = startup_adm5120_irq,
- .shutdown = shutdown_adm5120_irq,
- .enable = enable_adm5120_irq,
- .disable = disable_adm5120_irq,
- .ack = ack_adm5120_irq,
- .end = end_adm5120_irq,
- .set_affinity = NULL,
-};
-
-
-void __init arch_init_irq(void)
-{
- int i;
-
- for (i = 0; i <= ADM5120_IRQ_MAX; i++) {
- irq_desc[i].status = IRQ_DISABLED;
- irq_desc[i].action = 0;
- irq_desc[i].depth = 1;
- irq_desc[i].chip = &adm5120_irq_type;
- }
-}
+++ /dev/null
-/*****************************************************************************
- * Carsten Langgaard, carstenl@mips.com
- * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved.
- * Copyright (C) 2003 ADMtek Incorporated.
- * daniell@admtek.com.tw
- * Copyright (C) 2005 Jeroen Vreeken (pe1rxq@amsat.org)
- *
- * ########################################################################
- *
- * This program is free software; you can distribute it and/or modify it
- * under the terms of the GNU General Public License (Version 2) as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
- * for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- *
- * ########################################################################
- *
- *****************************************************************************/
-
-#include <linux/autoconf.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/bootmem.h>
-#include <linux/pfn.h>
-#include <linux/string.h>
-
-#include <asm/bootinfo.h>
-#include <asm/page.h>
-#include <asm/sections.h>
-
-#include <asm-mips/mips-boards/prom.h>
-
-extern char *prom_getenv(char *envname);
-
-#define PFN_ALIGN(x) (((unsigned long)(x) + (PAGE_SIZE - 1)) & PAGE_MASK)
-
-#define ADM5120_MEMCTRL 0x1200001c
-#define ADM5120_MEMCTRL_SDRAM_MASK 0x7
-
-static const unsigned long adm_sdramsize[] __initdata = {
- 0x0, /* Reserved */
- 0x0400000, /* 4Mb */
- 0x0800000, /* 8Mb */
- 0x1000000, /* 16Mb */
- 0x4000000, /* 64Mb */
- 0x8000000, /* 128Mb */
-};
-
-/* determined physical memory size, not overridden by command line args */
-unsigned long physical_memsize = 0L;
-
-struct prom_pmemblock mdesc[PROM_MAX_PMEMBLOCKS];
-
-struct prom_pmemblock * __init prom_getmdesc(void)
-{
- char *memsize_str;
- unsigned int memsize;
- char cmdline[CL_SIZE], *ptr;
-
- memsize_str = prom_getenv("memsize");
-
- if (!memsize_str)
- {
- prom_printf("memsize not set in boot prom, set to default (8Mb)\n");
- physical_memsize = 0x00800000;
- }
- else
-#ifdef DEBUG
- prom_printf("prom_memsize = %s\n", memsize_str);
-#endif
- physical_memsize = simple_strtol(memsize_str, NULL, 0);
-
- /* Check the command line for a memsize directive that overrides
- * the physical/default amount */
- strcpy(cmdline, arcs_cmdline);
- ptr = strstr(cmdline, "memsize=");
- if (ptr && (ptr != cmdline) && (*(ptr - 1) != ' '))
- ptr = strstr(ptr, " memsize=");
-
- if (ptr)
- memsize = memparse(ptr + 8, &ptr);
- else
- memsize = physical_memsize;
-
- memset(mdesc, 0, sizeof(mdesc));
-
- mdesc[0].type = BOOT_MEM_RAM;
- mdesc[0].base = CPHYSADDR(PFN_ALIGN(&_end));
- mdesc[0].size = memsize - mdesc[0].base;
-
- return &mdesc[0];
-}
-
-void __init prom_meminit(void)
-{
- struct prom_pmemblock *p;
-
- p = prom_getmdesc();
-
- while (p->size)
- {
- long type;
- unsigned long base, size;
- base = p->base;
- type = p->type,
- size = p->size;
- add_memory_region(base, size, type);
- p++;
- }
-}
-
-#if 0
-void __init prom_meminit(void)
-{
- unsigned long base = CPHYSADDR(PFN_ALIGN(&_end));
- unsigned long size;
-
- u32 memctrl = *(u32*)KSEG1ADDR(ADM5120_MEMCTRL);
- size = adm_sdramsize[memctrl & ADM5120_MEMCTRL_SDRAM_MASK];
- add_memory_region(base, size-base, BOOT_MEM_RAM);
-}
-#endif
-
-unsigned long __init prom_free_prom_memory(void)
-{
- /* We do not have to prom memory to free */
- return 0;
-}
+++ /dev/null
-/*
- * Carsten Langgaard, carstenl@mips.com
- * Copyright (C) 1999, 2000 MIPS Technologies, Inc. All rights reserved.
- *
- * ########################################################################
- *
- * This program is free software; you can distribute it and/or modify it
- * under the terms of the GNU General Public License (Version 2) as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
- * for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- *
- * ########################################################################
- *
- * Interrupt exception dispatch code.
- *
- */
-#include <linux/autoconf.h>
-
-#include <asm/asm.h>
-#include <asm/mipsregs.h>
-#include <asm/regdef.h>
-#include <asm/stackframe.h>
-
-#define STATUS_IE 0x00000001
-
-/* A lot of complication here is taken away because:
- *
- * 1) We handle one interrupt and return, sitting in a loop and moving across
- * all the pending IRQ bits in the cause register is _NOT_ the answer, the
- * common case is one pending IRQ so optimize in that direction.
- *
- * 2) We need not check against bits in the status register IRQ mask, that
- * would make this routine slow as hell.
- *
- * 3) Linux only thinks in terms of all IRQs on or all IRQs off, nothing in
- * between like BSD spl() brain-damage.
- *
- * Furthermore, the IRQs on the MIPS board look basically (barring software
- * IRQs which we don't use at all and all external interrupt sources are
- * combined together on hardware interrupt 0 (MIPS IRQ 2)) like:
- *
- * MIPS IRQ Source
- * -------- ------
- * 0 Software (ignored)
- * 1 Software (ignored)
- * 2 Combined hardware interrupt (hw0)
- * 3 Hardware (ignored)
- * 4 Hardware (ignored)
- * 5 Hardware (ignored)
- * 6 Hardware (ignored)
- * 7 R4k timer (what we use)
- *
- * Note: On the SEAD board thing are a little bit different.
- * Here IRQ 2 (hw0) is wired to the UART0 and IRQ 3 (hw1) is wired
- * wired to UART1.
- *
- * We handle the IRQ according to _our_ priority which is:
- *
- * Highest ---- R4k Timer
- * Lowest ---- Combined hardware interrupt
- *
- * then we just return, if multiple IRQs are pending then we will just take
- * another exception, big deal.
- */
-
- .text
- .set noreorder
- .set noat
- .align 5
-
-NESTED(mipsIRQ, PT_SIZE, sp)
- SAVE_ALL
- CLI
- .set at
-
- mfc0 s0, CP0_CAUSE
- mfc0 s1, CP0_STATUS
- and s0, s0, s1
-
- /* First we check for r4k counter/timer IRQ. */
- andi a0, s0, CAUSEF_IP7
- beq a0, zero, 1f
- nop
-
- move a0, sp
- jal mips_timer_interrupt
- nop
-
- j ret_from_irq
- nop
-
-1:
- andi a0, s0, CAUSEF_IP2
- beq a0, zero, 1f
- nop
-
- move a0, sp
- jal adm5120_hw0_irqdispatch
- nop
-1:
- j ret_from_irq
- nop
-
-END(mipsIRQ)
-
-
-LEAF(mips_int_lock)
- .set noreorder
- mfc0 v0, CP0_STATUS
- li v1, ~STATUS_IE
- and v1, v1, v0
- mtc0 v1, CP0_STATUS
- j ra
- and v0, v0, STATUS_IE
- .set reorder
-END(mips_int_lock)
-
-
-LEAF(mips_int_unlock)
- mfc0 v0, CP0_STATUS
- and a0, a0, STATUS_IE
- or v0, v0, a0
- mtc0 v0, CP0_STATUS
- j ra
- nop
-END(mips_int_unlock)
-
+++ /dev/null
-/*****************************************************************************
- * Carsten Langgaard, carstenl@mips.com
- * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved.
- * Copyright (C) 2003 ADMtek Incorporated.
- * daniell@admtek.com.tw
- *
- * This program is free software; you can distribute it and/or modify it
- * under the terms of the GNU General Public License (Version 2) as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
- * for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- *
- *****************************************************************************/
-
-#include <linux/init.h>
-#include <linux/autoconf.h>
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/mm.h>
-#include <linux/bootmem.h>
-
-#include <asm/bootinfo.h>
-#include <asm/addrspace.h>
-
-#include <adm5120_info.h>
-
-void setup_prom_printf(int);
-void prom_printf(char *, ...);
-void prom_meminit(void);
-
-#define ADM5120_ENVC 1
-
-char *adm5120_envp[2*ADM5120_ENVC] = {"memsize","0x001000000"};
-
-#define READCSR(r) *(volatile unsigned long *)(0xB2600000+(r))
-#define WRITECSR(r,v) *(volatile unsigned long *)(0xB2600000+(r)) = v
-
-#define UART_DR_REG 0x00
-#define UART_FR_REG 0x18
-#define UART_TX_FIFO_FULL 0x20
-
-int putPromChar(char c)
-{
- WRITECSR(UART_DR_REG, c);
- while ( (READCSR(UART_FR_REG) & UART_TX_FIFO_FULL) );
- return 0;
-}
-
-/*
- * Ugly prom_printf used for debugging
- */
-
-void prom_printf(char *fmt, ...)
-{
- va_list args;
- int l;
- char *p, *buf_end;
- char buf[1024];
-
- va_start(args, fmt);
- l = vsprintf(buf, fmt, args); /* hopefully i < sizeof(buf) */
- va_end(args);
-
- buf_end = buf + l;
-
- for (p = buf; p < buf_end; p++) {
- /* Crude cr/nl handling is better than none */
- if (*p == '\n')
- putPromChar('\r');
- putPromChar(*p);
- }
-}
-
-char *prom_getenv(char *envname)
-{
- int i, index=0;
-
- i = strlen(envname);
-
- printk(KERN_INFO "GETENV: envname is %s\n", envname);
-
- while(index < (2*ADM5120_ENVC)) {
- if(strncmp(envname, adm5120_envp[index], i) == 0) {
- printk(KERN_INFO "GETENV: returning %s\n", adm5120_envp[index+1]);
- return(adm5120_envp[index+1]);
- }
- index += 2;
- }
-
- printk(KERN_INFO "GETENV: not found.\n");
- return(NULL);
-}
-
-
-/*
- * initialize the prom module.
- */
-void __init prom_init(void)
-{
- /* you should these macros defined in include/asm/bootinfo.h */
- mips_machgroup = MACH_GROUP_ADM_GW;
- mips_machtype = MACH_ADM_GW_5120;
-
- adm5120_info_init();
-
- /* init command line, register a default kernel command line */
- strcpy(&(arcs_cmdline[0]), "console=ttyS0,115200 rootfstype=squashfs,jffs2 init=/etc/preinit");
-
- /* init memory map */
- prom_meminit();
-}
+++ /dev/null
-/*
- * Copyright (C) ADMtek Incorporated.
- * Creator : daniell@admtek.com.tw
- * Copyright 1999, 2000 MIPS Technologies, Inc.
- * Copyright Jeroen Vreeken (pe1rxq@amsat.org), 2005
- */
-
-#include <linux/autoconf.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/platform_device.h>
-
-#include <asm/reboot.h>
-#include <asm/io.h>
-#include <asm/time.h>
-
-#include <adm5120_info.h>
-
-#define ADM5120_SOFTRESET 0x12000004
-#define STATUS_IE 0x00000001
-#define ALLINTS (IE_IRQ0 | IE_IRQ5 | STATUS_IE)
-
-void mips_time_init(void);
-
-extern unsigned int mips_counter_frequency;
-
-void adm5120_restart(char *command)
-{
- *(u32*)KSEG1ADDR(ADM5120_SOFTRESET)=1;
-}
-
-
-void adm5120_halt(void)
-{
- printk(KERN_NOTICE "\n** You can safely turn off the power\n");
- while (1);
-}
-
-
-void adm5120_power_off(void)
-{
- adm5120_halt();
-}
-
-void __init adm5120_time_init(void)
-{
- mips_counter_frequency = adm5120_info.cpu_speed >> 1;
-}
-
-void __init plat_timer_setup(struct irqaction *irq)
-{
- /* to generate the first timer interrupt */
- write_c0_compare(read_c0_count()+ mips_counter_frequency/HZ);
- clear_c0_status(ST0_BEV);
- set_c0_status(ALLINTS);
-}
-
-void __init plat_mem_setup(void)
-{
- printk(KERN_INFO "ADM5120 board setup\n");
-
- board_time_init = adm5120_time_init;
- //board_timer_setup = mips_timer_setup;
-
- _machine_restart = adm5120_restart;
- _machine_halt = adm5120_halt;
- pm_power_off = adm5120_power_off;
-
- set_io_port_base(KSEG1);
-}
-
-const char *get_system_type(void)
-{
- return "ADM5120 Board";
-}
-
-static struct resource adm5120_hcd_resources[] = {
- [0] = {
- .start = 0x11200000,
- .end = 0x11200084,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = 0x3,
- .end = 0x3,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device adm5120hcd_device = {
- .name = "adm5120-hcd",
- .id = -1,
- .num_resources = ARRAY_SIZE(adm5120_hcd_resources),
- .resource = adm5120_hcd_resources,
-};
-
-static struct platform_device *devices[] __initdata = {
- &adm5120hcd_device,
-};
-
-static int __init adm5120_init(void)
-{
- return platform_add_devices(devices, ARRAY_SIZE(devices));
-}
-
-subsys_initcall(adm5120_init);
+++ /dev/null
-/*
- * Copyright (C) ADMtek Incorporated.
- * Copyright (C) 2005 Jeroen Vreeken (pe1rxq@amsat.org)
- * Copyright (C) 2007 Gabor Juhos <juhosg@freemail.hu>
- * Copyright (C) 2007 OpenWrt.org
- */
-
-#include <linux/autoconf.h>
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-
-#include <adm5120_defs.h>
-
-volatile u32* pci_config_address_reg = (volatile u32*)KSEG1ADDR(ADM5120_PCICFG_ADDR);
-volatile u32* pci_config_data_reg = (volatile u32*)KSEG1ADDR(ADM5120_PCICFG_DATA);
-
-#define PCI_ENABLE 0x80000000
-
-static int pci_config_read(struct pci_bus *bus, unsigned int devfn, int where,
- int size, uint32_t *val)
-{
- *pci_config_address_reg = ((bus->number & 0xff) << 0x10) |
- ((devfn & 0xff) << 0x08) | (where & 0xfc) | PCI_ENABLE;
- switch (size) {
- case 1:
- *val = ((*pci_config_data_reg)>>((where&3)<<3))&0xff;
- break;
- case 2:
- *val = ((*pci_config_data_reg)>>((where&3)<<3))&0xffff;
- break;
- default:
- *val = (*pci_config_data_reg);
- }
- return PCIBIOS_SUCCESSFUL;
-}
-
-static int pci_config_write(struct pci_bus *bus, unsigned int devfn, int where,
- int size, uint32_t val)
-{
- *pci_config_address_reg = ((bus->number & 0xff) << 0x10) |
- ((devfn & 0xff) << 0x08) | (where & 0xfc) | PCI_ENABLE;
- switch (size) {
- case 1:
- *(volatile u8 *)(((int)pci_config_data_reg) +
- (where & 3)) = val;
- break;
- case 2:
- *(volatile u16 *)(((int)pci_config_data_reg) +
- (where & 2)) = (val);
- break;
- default:
- *pci_config_data_reg = (val);
- }
-
- return PCIBIOS_SUCCESSFUL;
-}
-
-struct pci_ops adm5120_pci_ops = {
- .read = pci_config_read,
- .write = pci_config_write,
-};
+++ /dev/null
-/*
- * Copyright (C) ADMtek Incorporated.
- * Copyright (C) 2005 Jeroen Vreeken (pe1rxq@amsat.org)
- * Copyright (C) 2007 Gabor Juhos <juhosg@freemail.hu>
- * Copyright (C) 2007 OpenWrt.org
- */
-
-#include <linux/autoconf.h>
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-
-#include <adm5120_info.h>
-#include <adm5120_defs.h>
-
-extern struct pci_ops adm5120_pci_ops;
-
-#define PCI_CMM_IOACC_EN 0x1
-#define PCI_CMM_MEMACC_EN 0x2
-#define PCI_CMM_MASTER_EN 0x4
-#define PCI_CMM_DEF \
- (PCI_CMM_IOACC_EN | PCI_CMM_MEMACC_EN | PCI_CMM_MASTER_EN)
-
-#define PCI_DEF_CACHE_LINE_SZ 4
-
-
-struct resource pci_io_resource = {
- .name = "ADM5120 PCI I/O",
- .start = ADM5120_PCIIO_BASE,
- .end = ADM5120_PCICFG_ADDR-1,
- .flags = IORESOURCE_IO
-};
-
-struct resource pci_mem_resource = {
- .name = "ADM5120 PCI MEM",
- .start = ADM5120_PCIMEM_BASE,
- .end = ADM5120_PCIIO_BASE-1,
- .flags = IORESOURCE_MEM
-};
-
-static struct pci_controller adm5120_controller = {
- .pci_ops = &adm5120_pci_ops,
- .io_resource = &pci_io_resource,
- .mem_resource = &pci_mem_resource,
-};
-
-int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
-{
- if (slot < 2 || slot > 4)
- return -1;
- return slot + 4;
-}
-
-static void adm5120_pci_fixup(struct pci_dev *dev)
-{
- if (dev->devfn == 0) {
- pci_write_config_word(dev, PCI_COMMAND, PCI_CMM_DEF);
- pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE,
- PCI_DEF_CACHE_LINE_SZ);
- pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, 0);
- pci_write_config_dword(dev, PCI_BASE_ADDRESS_1, 0);
- }
-}
-
-DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, adm5120_pci_fixup);
-
-
-int pcibios_plat_dev_init(struct pci_dev *dev)
-{
- return 0;
-}
-
-static int __init adm5120_pci_setup(void)
-{
- int pci_bios;
-
- pci_bios = adm5120_has_pci();
-
- printk("adm5120: system has %sPCI BIOS\n", pci_bios ? "" : "no ");
- if (pci_bios == 0)
- return 1;
-
- /* Avoid ISA compat ranges. */
- PCIBIOS_MIN_IO = 0x00000000;
- PCIBIOS_MIN_MEM = 0x00000000;
-
- /* Set I/O resource limits. */
- ioport_resource.end = 0x1fffffff;
- iomem_resource.end = 0xffffffff;
-
- register_pci_controller(&adm5120_controller);
- return 0;
-}
-
-subsys_initcall(adm5120_pci_setup);
+++ /dev/null
-/*
- * ADM5120 LED (GPIO) driver
- *
- * Copyright (C) Jeroen Vreeken (pe1rxq@amsat.org), 2005
- */
-
-#include <linux/autoconf.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/miscdevice.h>
-#include <linux/fs.h>
-
-#define LED_MINOR 151
-#define GPIO_IO ((unsigned long *)0xb20000b8)
-
-static ssize_t adm5120_led_write(struct file *file, const char __user *data,
- size_t len, loff_t *ppos)
-{
- unsigned char val;
-
- if (!len || get_user(val, data))
- return -EFAULT;
- *GPIO_IO=(*GPIO_IO & 0x00ffffff) | (val<<24);
- return 1;
-}
-
-static struct file_operations adm5120_led_fops = {
- .owner = THIS_MODULE,
- .write = adm5120_led_write,
-};
-
-static struct miscdevice adm5120_led_device = {
- LED_MINOR,
- "led",
- &adm5120_led_fops,
-};
-
-static int __init adm5120_led_init(void)
-{
- printk(KERN_INFO "ADM5120 LED & GPIO driver\n");
- if (misc_register(&adm5120_led_device)) {
- printk(KERN_WARNING "Couldn't register device %d\n", LED_MINOR);
- return -EBUSY;
- }
- return 0;
-}
-
-static void __exit adm5120_led_exit(void)
-{
- misc_deregister(&adm5120_led_device);
-}
-
-module_init(adm5120_led_init);
-module_exit(adm5120_led_exit);
-
-MODULE_DESCRIPTION("ADM5120 LED and GPIO driver");
-MODULE_AUTHOR("Jeroen Vreeken");
-MODULE_LICENSE("GPL");
+++ /dev/null
-#include <linux/init.h>
-#include <linux/mtd/nand.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/delay.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/bootinfo.h>
-#ifdef CONFIG_MIPS_ADM5120
-#include <asm/mach-adm5120/adm5120_defs.h>
-#endif
-
-#define IDT434_REG_BASE ((volatile void *) KSEG1ADDR(0x18000000))
-
-#define GPIOF 0x050000
-#define GPIOC 0x050004
-#define GPIOD 0x050008
-
-#define GPIO_RDY (1 << 0x08)
-#define GPIO_WPX (1 << 0x09)
-#define GPIO_ALE (1 << 0x0a)
-#define GPIO_CLE (1 << 0x0b)
-
-#define DEV2BASE 0x010020
-
-#define LO_WPX (1 << 0)
-#define LO_ALE (1 << 1)
-#define LO_CLE (1 << 2)
-#define LO_CEX (1 << 3)
-#define LO_FOFF (1 << 5)
-#define LO_SPICS (1 << 6)
-#define LO_ULED (1 << 7)
-
-#define MEM32(x) *((volatile unsigned *) (x))
-
-
-/* RouterBoard RB1xx specific definitions */
-#define SMEM1(x) (*((volatile unsigned char *) (KSEG1ADDR(ADM5120_SRAM1_BASE) + x)))
-
-#define NAND_RW_REG 0x0 //data register
-#define NAND_SET_CEn 0x1 //CE# low
-#define NAND_CLR_CEn 0x2 //CE# high
-#define NAND_CLR_CLE 0x3 //CLE low
-#define NAND_SET_CLE 0x4 //CLE high
-#define NAND_CLR_ALE 0x5 //ALE low
-#define NAND_SET_ALE 0x6 //ALE high
-#define NAND_SET_SPn 0x7 //SP# low (use spare area)
-#define NAND_CLR_SPn 0x8 //SP# high (do not use spare area)
-#define NAND_SET_WPn 0x9 //WP# low
-#define NAND_CLR_WPn 0xA //WP# high
-#define NAND_STS_REG 0xB //Status register
-
-static void __iomem *p_nand;
-
-#ifdef CONFIG_MIKROTIK_RB500
-extern void changeLatchU5(unsigned char orMask, unsigned char nandMask);
-
-static int rb500_dev_ready(struct mtd_info *mtd)
-{
- return MEM32(IDT434_REG_BASE + GPIOD) & GPIO_RDY;
-}
-
-/*
- * hardware specific access to control-lines
- *
- * ctrl:
- * NAND_CLE: bit 2 -> bit 3
- * NAND_ALE: bit 3 -> bit 2
- */
-static void rbmips_hwcontrol500(struct mtd_info *mtd, int cmd,
- unsigned int ctrl)
-{
- struct nand_chip *chip = mtd->priv;
- unsigned char orbits, nandbits;
-
- if (ctrl & NAND_CTRL_CHANGE) {
-
- orbits = (ctrl & NAND_CLE) << 1;
- orbits |= (ctrl & NAND_ALE) >> 1;
-
- nandbits = (~ctrl & NAND_CLE) << 1;
- nandbits |= (~ctrl & NAND_ALE) >> 1;
-
- changeLatchU5(orbits, nandbits);
- }
- if (cmd != NAND_CMD_NONE)
- writeb(cmd, chip->IO_ADDR_W);
-
-}
-#endif
-
-#ifdef CONFIG_MIPS_ADM5120
-static int rb100_dev_ready(struct mtd_info *mtd)
-{
- return SMEM1(NAND_STS_REG) & 0x80; /* found out by experiment */
-}
-
-static void rbmips_hwcontrol100(struct mtd_info *mtd, int cmd, unsigned int ctrl)
-{
- struct nand_chip *chip = mtd->priv;
-
- if (ctrl & NAND_CTRL_CHANGE)
- SMEM1(ctrl) = 0x01;
- if (cmd != NAND_CMD_NONE)
- writeb(cmd, chip->IO_ADDR_W);
-}
-#endif
-
-
-static struct mtd_partition partition_info[] = {
- {
- name:"RouterBoard NAND Boot",
- offset:0,
- size:4 * 1024 * 1024},
- {
- name:"RouterBoard NAND Main",
- offset:MTDPART_OFS_NXTBLK,
- size:MTDPART_SIZ_FULL}
-};
-
-static struct mtd_info rmtd;
-static struct nand_chip rnand;
-
-static unsigned init_ok = 0;
-
-unsigned get_rbnand_block_size(void)
-{
- if (init_ok)
- return rmtd.writesize;
- else
- return 0;
-}
-
-EXPORT_SYMBOL(get_rbnand_block_size);
-
-int __init rbmips_init(void)
-{
- memset(&rmtd, 0, sizeof(rmtd));
- memset(&rnand, 0, sizeof(rnand));
-
-#ifdef CONFIG_MIKROTIK_RB500
- printk("RB500 nand\n");
- changeLatchU5(LO_WPX | LO_FOFF | LO_CEX,
- LO_ULED | LO_ALE | LO_CLE);
- rnand.cmd_ctrl = rbmips_hwcontrol500;
-
- rnand.dev_ready = rb500_dev_ready;
- rnand.IO_ADDR_W = (unsigned char *)
- KSEG1ADDR(MEM32(IDT434_REG_BASE + DEV2BASE));
- rnand.IO_ADDR_R = rnand.IO_ADDR_W;
-#endif
-
-#ifdef CONFIG_MIPS_ADM5120
- printk("RB100 nand\n");
- /* enable NAND flash */
- MEM32(0xB2000064) = 0x100;
- /* boot done */
- MEM32(0xB2000008) = 0x1;
- SMEM1(NAND_SET_SPn) = 0x01;
- SMEM1(NAND_CLR_WPn) = 0x01;
- rnand.IO_ADDR_R = (unsigned char *)KSEG1ADDR(ADM5120_SRAM1_BASE);
- rnand.IO_ADDR_W = rnand.IO_ADDR_R;
- rnand.cmd_ctrl = rbmips_hwcontrol100;
- rnand.dev_ready = rb100_dev_ready;
-#endif
- p_nand = (void __iomem *) ioremap((void *) 0x18a20000, 0x1000);
- if (!p_nand) {
- printk("RBnand Unable ioremap buffer");
- return -ENXIO;
- }
- rnand.ecc.mode = NAND_ECC_SOFT;
- rnand.chip_delay = 25;
- rnand.options |= NAND_NO_AUTOINCR;
- rmtd.priv = &rnand;
-
-#ifdef CONFIG_MIKROTIK_RB500
- int *b;
-
- b = (int *) KSEG1ADDR(0x18010020);
- printk("dev2base 0x%08x mask 0x%08x c 0x%08x tc 0x%08x\n", b[0],
- b[1], b[2], b[3]);
-#endif
-
- if (nand_scan(&rmtd, 1) && nand_scan(&rmtd, 1)
- && nand_scan(&rmtd, 1) && nand_scan(&rmtd, 1)) {
- printk("RBxxx nand device not found");
- iounmap((void *) p_nand);
- return -ENXIO;
- }
-
- add_mtd_partitions(&rmtd, partition_info, 2);
- init_ok = 1;
- return 0;
-}
-
-module_init(rbmips_init);
+++ /dev/null
-/*
- * ADM5120 built in ethernet switch driver
- *
- * Copyright Jeroen Vreeken (pe1rxq@amsat.org), 2005
- *
- * Inspiration for this driver came from the original ADMtek 2.4
- * driver, Copyright ADMtek Inc.
- */
-#include <linux/autoconf.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/skbuff.h>
-#include <linux/errno.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <asm/mipsregs.h>
-#include <asm/irq.h>
-#include <asm/io.h>
-#include "adm5120sw.h"
-
-#include "adm5120_info.h"
-
-MODULE_AUTHOR("Jeroen Vreeken (pe1rxq@amsat.org)");
-MODULE_DESCRIPTION("ADM5120 ethernet switch driver");
-MODULE_LICENSE("GPL");
-
-/*
- * The ADM5120 uses an internal matrix to determine which ports
- * belong to which VLAN.
- * The default generates a VLAN (and device) for each port
- * (including MII port) and the CPU port is part of all of them.
- *
- * Another example, one big switch and everything mapped to eth0:
- * 0x7f, 0x00, 0x00, 0x00, 0x00, 0x00
- */
-static unsigned char vlan_matrix[SW_DEVS] = {
- 0x41, 0x42, 0x44, 0x48, 0x50, 0x60
-};
-
-static int adm5120_nrdevs;
-
-static struct net_device *adm5120_devs[SW_DEVS];
-static struct adm5120_dma
- adm5120_dma_txh_v[ADM5120_DMA_TXH] __attribute__((aligned(16))),
- adm5120_dma_txl_v[ADM5120_DMA_TXL] __attribute__((aligned(16))),
- adm5120_dma_rxh_v[ADM5120_DMA_RXH] __attribute__((aligned(16))),
- adm5120_dma_rxl_v[ADM5120_DMA_RXL] __attribute__((aligned(16))),
- *adm5120_dma_txh,
- *adm5120_dma_txl,
- *adm5120_dma_rxh,
- *adm5120_dma_rxl;
-static struct sk_buff
- *adm5120_skb_rxh[ADM5120_DMA_RXH],
- *adm5120_skb_rxl[ADM5120_DMA_RXL],
- *adm5120_skb_txh[ADM5120_DMA_TXH],
- *adm5120_skb_txl[ADM5120_DMA_TXL];
-static int adm5120_rxhi = 0;
-static int adm5120_rxli = 0;
-/* We don't use high priority tx for now */
-/*static int adm5120_txhi = 0;*/
-static int adm5120_txli = 0;
-static int adm5120_txhit = 0;
-static int adm5120_txlit = 0;
-static int adm5120_if_open = 0;
-
-static inline void adm5120_set_reg(unsigned int reg, unsigned long val)
-{
- *(volatile unsigned long*)(SW_BASE+reg) = val;
-}
-
-static inline unsigned long adm5120_get_reg(unsigned int reg)
-{
- return *(volatile unsigned long*)(SW_BASE+reg);
-}
-
-static inline void adm5120_rxfixup(struct adm5120_dma *dma,
- struct sk_buff **skbl, int num)
-{
- int i;
-
- /* Resubmit the entire ring */
- for (i=0; i<num; i++) {
- dma[i].status = 0;
- dma[i].cntl = 0;
- dma[i].len = ADM5120_DMA_RXSIZE;
- dma[i].data = ADM5120_DMA_ADDR(skbl[i]->data) |
- ADM5120_DMA_OWN | (i==num-1 ? ADM5120_DMA_RINGEND : 0);
- }
-}
-
-static inline void adm5120_rx(struct adm5120_dma *dma, struct sk_buff **skbl,
- int *index, int num)
-{
- struct sk_buff *skb, *skbn;
- struct adm5120_sw *priv;
- struct net_device *dev;
- int port, vlan, len;
-
- while (!(dma[*index].data & ADM5120_DMA_OWN)) {
- port = (dma[*index].status & ADM5120_DMA_PORTID);
- port >>= ADM5120_DMA_PORTSHIFT;
- for (vlan = 0; vlan < adm5120_nrdevs; vlan++) {
- if ((1<<port) & vlan_matrix[vlan])
- break;
- }
- if (vlan == adm5120_nrdevs)
- vlan = 0;
- dev = adm5120_devs[vlan];
- skb = skbl[*index];
- len = (dma[*index].status & ADM5120_DMA_LEN);
- len >>= ADM5120_DMA_LENSHIFT;
- len -= ETH_FCS;
-
- priv = netdev_priv(dev);
- if (len <= 0 || len > ADM5120_DMA_RXSIZE ||
- dma[*index].status & ADM5120_DMA_FCSERR) {
- priv->stats.rx_errors++;
- skbn = NULL;
- } else {
- skbn = dev_alloc_skb(ADM5120_DMA_RXSIZE+16);
- if (skbn) {
- skb_put(skb, len);
- skb->dev = dev;
- skb->protocol = eth_type_trans(skb, dev);
- skb->ip_summed = CHECKSUM_UNNECESSARY;
- dev->last_rx = jiffies;
- priv->stats.rx_packets++;
- priv->stats.rx_bytes+=len;
- skb_reserve(skbn, 2);
- skbl[*index] = skbn;
- } else {
- printk(KERN_INFO "%s recycling!\n", dev->name);
- }
- }
-
- dma[*index].status = 0;
- dma[*index].cntl = 0;
- dma[*index].len = ADM5120_DMA_RXSIZE;
- dma[*index].data = ADM5120_DMA_ADDR(skbl[*index]->data) |
- ADM5120_DMA_OWN |
- (num-1==*index ? ADM5120_DMA_RINGEND : 0);
- if (num == ++*index)
- *index = 0;
- if (skbn)
- netif_rx(skb);
- }
-}
-
-static inline void adm5120_tx(struct adm5120_dma *dma, struct sk_buff **skbl,
- int *index, int num)
-{
- while((dma[*index].data & ADM5120_DMA_OWN) == 0 && skbl[*index]) {
- dev_kfree_skb_irq(skbl[*index]);
- skbl[*index] = NULL;
- if (++*index == num)
- *index = 0;
- }
-}
-
-static irqreturn_t adm5120_sw_irq(int irq, void *dev_id)
-{
- unsigned long intreg;
-
- adm5120_set_reg(ADM5120_INT_MASK,
- adm5120_get_reg(ADM5120_INT_MASK) | ADM5120_INTHANDLE);
-
- intreg = adm5120_get_reg(ADM5120_INT_ST);
- adm5120_set_reg(ADM5120_INT_ST, intreg);
-
- if (intreg & ADM5120_INT_RXH)
- adm5120_rx(adm5120_dma_rxh, adm5120_skb_rxh, &adm5120_rxhi,
- ADM5120_DMA_RXH);
- if (intreg & ADM5120_INT_HFULL)
- adm5120_rxfixup(adm5120_dma_rxh, adm5120_skb_rxh,
- ADM5120_DMA_RXH);
- if (intreg & ADM5120_INT_RXL)
- adm5120_rx(adm5120_dma_rxl, adm5120_skb_rxl, &adm5120_rxli,
- ADM5120_DMA_RXL);
- if (intreg & ADM5120_INT_LFULL)
- adm5120_rxfixup(adm5120_dma_rxl, adm5120_skb_rxl,
- ADM5120_DMA_RXL);
- if (intreg & ADM5120_INT_TXH)
- adm5120_tx(adm5120_dma_txh, adm5120_skb_txh, &adm5120_txhit,
- ADM5120_DMA_TXH);
- if (intreg & ADM5120_INT_TXL)
- adm5120_tx(adm5120_dma_txl, adm5120_skb_txl, &adm5120_txlit,
- ADM5120_DMA_TXL);
-
- adm5120_set_reg(ADM5120_INT_MASK,
- adm5120_get_reg(ADM5120_INT_MASK) & ~ADM5120_INTHANDLE);
-
- return IRQ_HANDLED;
-}
-
-static void adm5120_set_vlan(char *matrix)
-{
- unsigned long val;
-
- val = matrix[0] + (matrix[1]<<8) + (matrix[2]<<16) + (matrix[3]<<24);
- adm5120_set_reg(ADM5120_VLAN_GI, val);
- val = matrix[4] + (matrix[5]<<8);
- adm5120_set_reg(ADM5120_VLAN_GII, val);
-}
-
-static int adm5120_sw_open(struct net_device *dev)
-{
- if (!adm5120_if_open++)
- adm5120_set_reg(ADM5120_INT_MASK,
- adm5120_get_reg(ADM5120_INT_MASK) & ~ADM5120_INTHANDLE);
- netif_start_queue(dev);
- return 0;
-}
-
-static int adm5120_sw_stop(struct net_device *dev)
-{
- netif_stop_queue(dev);
- if (!--adm5120_if_open)
- adm5120_set_reg(ADM5120_INT_MASK,
- adm5120_get_reg(ADM5120_INT_MASK) | ADM5120_INTMASKALL);
- return 0;
-}
-
-static int adm5120_sw_tx(struct sk_buff *skb, struct net_device *dev)
-{
- struct adm5120_dma *dma = adm5120_dma_txl;
- struct sk_buff **skbl = adm5120_skb_txl;
- struct adm5120_sw *priv = netdev_priv(dev);
- int *index = &adm5120_txli;
- int num = ADM5120_DMA_TXL;
- int trigger = ADM5120_SEND_TRIG_L;
-
- dev->trans_start = jiffies;
- if (dma[*index].data & ADM5120_DMA_OWN) {
- dev_kfree_skb(skb);
- priv->stats.tx_dropped++;
- return 0;
- }
-
- dma[*index].data = ADM5120_DMA_ADDR(skb->data) | ADM5120_DMA_OWN;
- if (*index == num-1)
- dma[*index].data |= ADM5120_DMA_RINGEND;
- dma[*index].status =
- ((skb->len<ETH_ZLEN?ETH_ZLEN:skb->len) << ADM5120_DMA_LENSHIFT) |
- (0x1 << priv->port);
- dma[*index].len = skb->len < ETH_ZLEN ? ETH_ZLEN : skb->len;
- priv->stats.tx_packets++;
- priv->stats.tx_bytes += skb->len;
- skbl[*index]=skb;
-
- if (++*index == num)
- *index = 0;
- adm5120_set_reg(ADM5120_SEND_TRIG, trigger);
-
- return 0;
-}
-
-static void adm5120_tx_timeout(struct net_device *dev)
-{
- netif_wake_queue(dev);
-}
-
-static struct net_device_stats *adm5120_sw_stats(struct net_device *dev)
-{
- return &((struct adm5120_sw *)netdev_priv(dev))->stats;
-}
-
-static void adm5120_set_multicast_list(struct net_device *dev)
-{
- struct adm5120_sw *priv = netdev_priv(dev);
- int portmask;
-
- portmask = vlan_matrix[priv->port] & 0x3f;
-
- if (dev->flags & IFF_PROMISC)
- adm5120_set_reg(ADM5120_CPUP_CONF,
- adm5120_get_reg(ADM5120_CPUP_CONF) &
- ~((portmask << ADM5120_DISUNSHIFT) & ADM5120_DISUNALL));
- else
- adm5120_set_reg(ADM5120_CPUP_CONF,
- adm5120_get_reg(ADM5120_CPUP_CONF) |
- (portmask << ADM5120_DISUNSHIFT));
-
- if (dev->flags & IFF_PROMISC || dev->flags & IFF_ALLMULTI ||
- dev->mc_count)
- adm5120_set_reg(ADM5120_CPUP_CONF,
- adm5120_get_reg(ADM5120_CPUP_CONF) &
- ~((portmask << ADM5120_DISMCSHIFT) & ADM5120_DISMCALL));
- else
- adm5120_set_reg(ADM5120_CPUP_CONF,
- adm5120_get_reg(ADM5120_CPUP_CONF) |
- (portmask << ADM5120_DISMCSHIFT));
-}
-
-static void adm5120_write_mac(struct net_device *dev)
-{
- struct adm5120_sw *priv = netdev_priv(dev);
- unsigned char *mac = dev->dev_addr;
-
- adm5120_set_reg(ADM5120_MAC_WT1,
- mac[2] | (mac[3]<<8) | (mac[4]<<16) | (mac[5]<<24));
- adm5120_set_reg(ADM5120_MAC_WT0, (priv->port<<3) |
- (mac[0]<<16) | (mac[1]<<24) | ADM5120_MAC_WRITE | ADM5120_VLAN_EN);
-
- while (!(adm5120_get_reg(ADM5120_MAC_WT0) & ADM5120_MAC_WRITE_DONE));
-}
-
-static int adm5120_sw_set_mac_address(struct net_device *dev, void *p)
-{
- struct sockaddr *addr = p;
-
- memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
- adm5120_write_mac(dev);
- return 0;
-}
-
-static int adm5120_do_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
-{
- int err;
- struct adm5120_sw_info info;
- struct adm5120_sw *priv = netdev_priv(dev);
-
- switch(cmd) {
- case SIOCGADMINFO:
- info.magic = 0x5120;
- info.ports = adm5120_nrdevs;
- info.vlan = priv->port;
- err = copy_to_user(rq->ifr_data, &info, sizeof(info));
- if (err)
- return -EFAULT;
- break;
- case SIOCSMATRIX:
- if (!capable(CAP_NET_ADMIN))
- return -EPERM;
- err = copy_from_user(vlan_matrix, rq->ifr_data,
- sizeof(vlan_matrix));
- if (err)
- return -EFAULT;
- adm5120_set_vlan(vlan_matrix);
- break;
- case SIOCGMATRIX:
- err = copy_to_user(rq->ifr_data, vlan_matrix,
- sizeof(vlan_matrix));
- if (err)
- return -EFAULT;
- break;
- default:
- return -EOPNOTSUPP;
- }
- return 0;
-}
-
-static void adm5120_dma_tx_init(struct adm5120_dma *dma, struct sk_buff **skb,
- int num)
-{
- memset(dma, 0, sizeof(struct adm5120_dma)*num);
- dma[num-1].data |= ADM5120_DMA_RINGEND;
- memset(skb, 0, sizeof(struct skb*)*num);
-}
-
-static void adm5120_dma_rx_init(struct adm5120_dma *dma, struct sk_buff **skb,
- int num)
-{
- int i;
-
- memset(dma, 0, sizeof(struct adm5120_dma)*num);
- for (i=0; i<num; i++) {
- skb[i] = dev_alloc_skb(ADM5120_DMA_RXSIZE+16);
- if (!skb[i]) {
- i=num;
- break;
- }
- skb_reserve(skb[i], 2);
- dma[i].data = ADM5120_DMA_ADDR(skb[i]->data) | ADM5120_DMA_OWN;
- dma[i].cntl = 0;
- dma[i].len = ADM5120_DMA_RXSIZE;
- dma[i].status = 0;
- }
- dma[i-1].data |= ADM5120_DMA_RINGEND;
-}
-
-static int __init adm5120_sw_init(void)
-{
- int i, err;
- struct net_device *dev;
-
- err = request_irq(SW_IRQ, adm5120_sw_irq, 0, "ethernet switch", NULL);
- if (err)
- goto out;
-
- /* MII port? */
- if (adm5120_get_reg(ADM5120_CODE) & ADM5120_CODE_PQFP)
- adm5120_nrdevs = 5;
- /* CFE based devices only have two enet ports */
- else if (adm5120_info.boot_loader == BOOT_LOADER_CFE)
- adm5120_nrdevs = 2;
- else
- adm5120_nrdevs = 6;
-
- adm5120_set_reg(ADM5120_CPUP_CONF,
- ADM5120_DISCCPUPORT | ADM5120_CRC_PADDING |
- ADM5120_DISUNALL | ADM5120_DISMCALL);
- adm5120_set_reg(ADM5120_PORT_CONF0, ADM5120_ENMC | ADM5120_ENBP);
-
- adm5120_set_reg(ADM5120_PHY_CNTL2, adm5120_get_reg(ADM5120_PHY_CNTL2) |
- ADM5120_AUTONEG | ADM5120_NORMAL | ADM5120_AUTOMDIX);
- adm5120_set_reg(ADM5120_PHY_CNTL3, adm5120_get_reg(ADM5120_PHY_CNTL3) |
- ADM5120_PHY_NTH);
-
- adm5120_set_reg(ADM5120_INT_MASK, ADM5120_INTMASKALL);
- adm5120_set_reg(ADM5120_INT_ST, ADM5120_INTMASKALL);
-
- adm5120_dma_txh = (void *)KSEG1ADDR((u32)adm5120_dma_txh_v);
- adm5120_dma_txl = (void *)KSEG1ADDR((u32)adm5120_dma_txl_v);
- adm5120_dma_rxh = (void *)KSEG1ADDR((u32)adm5120_dma_rxh_v);
- adm5120_dma_rxl = (void *)KSEG1ADDR((u32)adm5120_dma_rxl_v);
-
- adm5120_dma_tx_init(adm5120_dma_txh, adm5120_skb_txh, ADM5120_DMA_TXH);
- adm5120_dma_tx_init(adm5120_dma_txl, adm5120_skb_txl, ADM5120_DMA_TXL);
- adm5120_dma_rx_init(adm5120_dma_rxh, adm5120_skb_rxh, ADM5120_DMA_RXH);
- adm5120_dma_rx_init(adm5120_dma_rxl, adm5120_skb_rxl, ADM5120_DMA_RXL);
- adm5120_set_reg(ADM5120_SEND_HBADDR, KSEG1ADDR(adm5120_dma_txh));
- adm5120_set_reg(ADM5120_SEND_LBADDR, KSEG1ADDR(adm5120_dma_txl));
- adm5120_set_reg(ADM5120_RECEIVE_HBADDR, KSEG1ADDR(adm5120_dma_rxh));
- adm5120_set_reg(ADM5120_RECEIVE_LBADDR, KSEG1ADDR(adm5120_dma_rxl));
-
- adm5120_set_vlan(vlan_matrix);
-
- for (i=0; i<adm5120_nrdevs; i++) {
- adm5120_devs[i] = alloc_etherdev(sizeof(struct adm5120_sw));
- if (!adm5120_devs[i]) {
- err = -ENOMEM;
- goto out_int;
- }
-
- dev = adm5120_devs[i];
- SET_MODULE_OWNER(dev);
- memset(netdev_priv(dev), 0, sizeof(struct adm5120_sw));
- ((struct adm5120_sw*)netdev_priv(dev))->port = i;
- dev->base_addr = SW_BASE;
- dev->irq = SW_IRQ;
- dev->open = adm5120_sw_open;
- dev->hard_start_xmit = adm5120_sw_tx;
- dev->stop = adm5120_sw_stop;
- dev->get_stats = adm5120_sw_stats;
- dev->set_multicast_list = adm5120_set_multicast_list;
- dev->do_ioctl = adm5120_do_ioctl;
- dev->tx_timeout = adm5120_tx_timeout;
- dev->watchdog_timeo = ETH_TX_TIMEOUT;
- dev->set_mac_address = adm5120_sw_set_mac_address;
- /* HACK alert!!! In the original admtek driver it is asumed
- that you can read the MAC addressess from flash, but edimax
- decided to leave that space intentionally blank...
- */
- memcpy(dev->dev_addr, "\x00\x50\xfc\x11\x22\x01", 6);
- dev->dev_addr[5] += i;
- adm5120_write_mac(dev);
-
- if ((err = register_netdev(dev))) {
- free_netdev(dev);
- goto out_int;
- }
- printk(KERN_INFO "%s: ADM5120 switch port%d\n", dev->name, i);
- }
- adm5120_set_reg(ADM5120_CPUP_CONF,
- ADM5120_CRC_PADDING | ADM5120_DISUNALL | ADM5120_DISMCALL);
-
- return 0;
-
-out_int:
- /* Undo everything that did succeed */
- for (; i; i--) {
- unregister_netdev(adm5120_devs[i-1]);
- free_netdev(adm5120_devs[i-1]);
- }
- free_irq(SW_IRQ, NULL);
-out:
- printk(KERN_ERR "ADM5120 Ethernet switch init failed\n");
- return err;
-}
-
-static void __exit adm5120_sw_exit(void)
-{
- int i;
-
- for (i = 0; i < adm5120_nrdevs; i++) {
- unregister_netdev(adm5120_devs[i]);
- free_netdev(adm5120_devs[i-1]);
- }
-
- free_irq(SW_IRQ, NULL);
-
- for (i = 0; i < ADM5120_DMA_RXH; i++) {
- if (!adm5120_skb_rxh[i])
- break;
- kfree_skb(adm5120_skb_rxh[i]);
- }
- for (i = 0; i < ADM5120_DMA_RXL; i++) {
- if (!adm5120_skb_rxl[i])
- break;
- kfree_skb(adm5120_skb_rxl[i]);
- }
-}
-
-module_init(adm5120_sw_init);
-module_exit(adm5120_sw_exit);
+++ /dev/null
-/*
- * Defines for ADM5120 built in ethernet switch driver
- *
- * Copyright Jeroen Vreeken (pe1rxq@amsat.org), 2005
- *
- * Values come from ADM5120 datasheet and original ADMtek 2.4 driver,
- * Copyright ADMtek Inc.
- */
-
-#ifndef _INCLUDE_ADM5120SW_H_
-#define _INCLUDE_ADM5120SW_H_
-
-#define SW_BASE KSEG1ADDR(0x12000000)
-#define SW_DEVS 6
-#define SW_IRQ 9
-
-#define ETH_TX_TIMEOUT HZ/4
-#define ETH_FCS 4;
-
-#define ADM5120_CODE 0x00 /* CPU description */
-#define ADM5120_CODE_PQFP 0x20000000 /* package type */
-#define ADM5120_CPUP_CONF 0x24 /* CPU port config */
-#define ADM5120_DISCCPUPORT 0x00000001 /* disable cpu port */
-#define ADM5120_CRC_PADDING 0x00000002 /* software crc */
-#define ADM5120_DISUNSHIFT 9
-#define ADM5120_DISUNALL 0x00007e00 /* disable unknown from all */
-#define ADM5120_DISMCSHIFT 16
-#define ADM5120_DISMCALL 0x003f0000 /* disable multicast from all */
-#define ADM5120_PORT_CONF0 0x28
-#define ADM5120_ENMC 0x00003f00 /* Enable MC routing (ex cpu) */
-#define ADM5120_ENBP 0x003f0000 /* Enable Back Pressure */
-#define ADM5120_VLAN_GI 0x40 /* VLAN settings */
-#define ADM5120_VLAN_GII 0x44
-#define ADM5120_SEND_TRIG 0x48
-#define ADM5120_SEND_TRIG_L 0x00000001
-#define ADM5120_SEND_TRIG_H 0x00000002
-#define ADM5120_MAC_WT0 0x58
-#define ADM5120_MAC_WRITE 0x00000001
-#define ADM5120_MAC_WRITE_DONE 0x00000002
-#define ADM5120_VLAN_EN 0x00000040
-#define ADM5120_MAC_WT1 0x5c
-#define ADM5120_PHY_CNTL2 0x7c
-#define ADM5120_AUTONEG 0x0000001f /* Auto negotiate */
-#define ADM5120_NORMAL 0x01f00000 /* PHY normal mode */
-#define ADM5120_AUTOMDIX 0x3e000000 /* Auto MDIX */
-#define ADM5120_PHY_CNTL3 0x80
-#define ADM5120_PHY_NTH 0x00000400
-#define ADM5120_INT_ST 0xb0
-#define ADM5120_INT_RXH 0x0000004
-#define ADM5120_INT_RXL 0x0000008
-#define ADM5120_INT_HFULL 0x0000010
-#define ADM5120_INT_LFULL 0x0000020
-#define ADM5120_INT_TXH 0x0000001
-#define ADM5120_INT_TXL 0x0000002
-#define ADM5120_INT_MASK 0xb4
-#define ADM5120_INTMASKALL 0x1FDEFFF /* All interrupts */
-#define ADM5120_INTHANDLE (ADM5120_INT_RXH | ADM5120_INT_RXL | \
- ADM5120_INT_HFULL | ADM5120_INT_LFULL | \
- ADM5120_INT_TXH | ADM5120_INT_TXL)
-#define ADM5120_SEND_HBADDR 0xd0
-#define ADM5120_SEND_LBADDR 0xd4
-#define ADM5120_RECEIVE_HBADDR 0xd8
-#define ADM5120_RECEIVE_LBADDR 0xdc
-
-struct adm5120_dma {
- u32 data;
- u32 cntl;
- u32 len;
- u32 status;
-} __attribute__ ((packed));
-
-#define ADM5120_DMA_MASK 0x01ffffff
-#define ADM5120_DMA_OWN 0x80000000 /* buffer owner */
-#define ADM5120_DMA_RINGEND 0x10000000 /* Last in DMA ring */
-
-#define ADM5120_DMA_ADDR(ptr) ((u32)(ptr) & ADM5120_DMA_MASK)
-#define ADM5120_DMA_PORTID 0x00007000
-#define ADM5120_DMA_PORTSHIFT 12
-#define ADM5120_DMA_LEN 0x07ff0000
-#define ADM5120_DMA_LENSHIFT 16
-#define ADM5120_DMA_FCSERR 0x00000008
-
-#define ADM5120_DMA_TXH 16
-#define ADM5120_DMA_TXL 64
-#define ADM5120_DMA_RXH 16
-#define ADM5120_DMA_RXL 8
-
-#define ADM5120_DMA_RXSIZE 1550
-#define ADM5120_DMA_EXTRA 20
-
-struct adm5120_sw {
- int port;
- struct net_device_stats stats;
-};
-
-#define SIOCSMATRIX SIOCDEVPRIVATE
-#define SIOCGMATRIX SIOCDEVPRIVATE+1
-#define SIOCGADMINFO SIOCDEVPRIVATE+2
-
-struct adm5120_sw_info {
- u16 magic;
- u16 ports;
- u16 vlan;
-};
-
-#endif /* _INCLUDE_ADM5120SW_H_ */
+++ /dev/null
-/*
- * Serial driver for ADM5120 SoC
- *
- * Derived from drivers/serial/uart00.c
- * Copyright 2001 Altera Corporation
- *
- * Some pieces are derived from the ADMtek 2.4 serial driver.
- * Copyright (C) ADMtek Incorporated, 2003
- * daniell@admtek.com.tw
- * Which again was derived from drivers/char/serial.c
- * Copyright (C) Linus Torvalds et al.
- *
- * Copyright Jeroen Vreeken (pe1rxq@amsat.org), 2005
- */
-
-#include <linux/autoconf.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/ioport.h>
-#include <linux/serial.h>
-#include <linux/serial_core.h>
-#include <linux/tty.h>
-#include <linux/tty_flip.h>
-#include <linux/console.h>
-
-#define ADM5120_UART_BASE0 0x12600000
-#define ADM5120_UART_BASE1 0x12800000
-#define ADM5120_UART_SIZE 0x20
-
-#define ADM5120_UART_IRQ0 1
-#define ADM5120_UART_IRQ1 2
-
-#define ADM5120_UART_REG(base, reg) \
- (*(volatile u32 *)KSEG1ADDR((base)+(reg)))
-
-#define ADM5120_UARTCLK_FREQ 62500000
-#define ADM5120_UART_BAUDDIV(rate) ((unsigned long)(ADM5120_UARTCLK_FREQ/(16*(rate)) - 1))
-
-#define ADM5120_UART_BAUD115200 ADM5120_UART_BAUDDIV(115200)
-
-#define ADM5120_UART_DATA 0x00
-#define ADM5120_UART_RS 0x04
-#define ADM5120_UART_LCR_H 0x08
-#define ADM5120_UART_LCR_M 0x0c
-#define ADM5120_UART_LCR_L 0x10
-#define ADM5120_UART_CR 0x14
-#define ADM5120_UART_FR 0x18
-#define ADM5120_UART_IR 0x1c
-
-#define ADM5120_UART_FE 0x01
-#define ADM5120_UART_PE 0x02
-#define ADM5120_UART_BE 0x04
-#define ADM5120_UART_OE 0x08
-#define ADM5120_UART_ERR 0x0f
-#define ADM5120_UART_FIFO_EN 0x10
-#define ADM5120_UART_EN 0x01
-#define ADM5120_UART_TIE 0x20
-#define ADM5120_UART_RIE 0x50
-#define ADM5120_UART_IE 0x78
-#define ADM5120_UART_CTS 0x01
-#define ADM5120_UART_DSR 0x02
-#define ADM5120_UART_DCD 0x04
-#define ADM5120_UART_TXFF 0x20
-#define ADM5120_UART_TXFE 0x80
-#define ADM5120_UART_RXFE 0x10
-#define ADM5120_UART_BRK 0x01
-#define ADM5120_UART_PEN 0x02
-#define ADM5120_UART_EPS 0x04
-#define ADM5120_UART_STP2 0x08
-#define ADM5120_UART_W5 0x00
-#define ADM5120_UART_W6 0x20
-#define ADM5120_UART_W7 0x40
-#define ADM5120_UART_W8 0x60
-#define ADM5120_UART_MIS 0x01
-#define ADM5120_UART_RIS 0x02
-#define ADM5120_UART_TIS 0x04
-#define ADM5120_UART_RTIS 0x08
-
-static void adm5120ser_stop_tx(struct uart_port *port)
-{
- ADM5120_UART_REG(port->iobase, ADM5120_UART_CR) &= ~ADM5120_UART_TIE;
-}
-
-static void adm5120ser_irq_rx(struct uart_port *port)
-{
- struct tty_struct *tty = port->info->tty;
- unsigned int status, ch, rds, flg, ignored = 0;
-
- status = ADM5120_UART_REG(port->iobase, ADM5120_UART_FR);
- while (!(status & ADM5120_UART_RXFE)) {
- /*
- * We need to read rds before reading the
- * character from the fifo
- */
- rds = ADM5120_UART_REG(port->iobase, ADM5120_UART_RS);
- ch = ADM5120_UART_REG(port->iobase, ADM5120_UART_DATA);
- port->icount.rx++;
-
- if (tty->low_latency)
- tty_flip_buffer_push(tty);
-
- flg = TTY_NORMAL;
-
- /*
- * Note that the error handling code is
- * out of the main execution path
- */
- if (rds & ADM5120_UART_ERR)
- goto handle_error;
- if (uart_handle_sysrq_char(port, ch))
- goto ignore_char;
-
- error_return:
- tty_insert_flip_char(tty, ch, flg);
-
- ignore_char:
- status = ADM5120_UART_REG(port->iobase, ADM5120_UART_FR);
- }
- out:
- tty_flip_buffer_push(tty);
- return;
-
- handle_error:
- ADM5120_UART_REG(port->iobase, ADM5120_UART_RS) = 0xff;
- if (rds & ADM5120_UART_BE) {
- port->icount.brk++;
- if (uart_handle_break(port))
- goto ignore_char;
- } else if (rds & ADM5120_UART_PE)
- port->icount.parity++;
- else if (rds & ADM5120_UART_FE)
- port->icount.frame++;
- if (rds & ADM5120_UART_OE)
- port->icount.overrun++;
-
- if (rds & port->ignore_status_mask) {
- if (++ignored > 100)
- goto out;
- goto ignore_char;
- }
- rds &= port->read_status_mask;
-
- if (rds & ADM5120_UART_BE)
- flg = TTY_BREAK;
- else if (rds & ADM5120_UART_PE)
- flg = TTY_PARITY;
- else if (rds & ADM5120_UART_FE)
- flg = TTY_FRAME;
-
- if (rds & ADM5120_UART_OE) {
- /*
- * CHECK: does overrun affect the current character?
- * ASSUMPTION: it does not.
- */
- tty_insert_flip_char(tty, ch, flg);
- ch = 0;
- flg = TTY_OVERRUN;
- }
-#ifdef CONFIG_MAGIC_SYSRQ
- port->sysrq = 0;
-#endif
- goto error_return;
-}
-
-static void adm5120ser_irq_tx(struct uart_port *port)
-{
- struct circ_buf *xmit = &port->info->xmit;
- int count;
-
- if (port->x_char) {
- ADM5120_UART_REG(port->iobase, ADM5120_UART_DATA) =
- port->x_char;
- port->icount.tx++;
- port->x_char = 0;
- return;
- }
- if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
- adm5120ser_stop_tx(port);
- return;
- }
-
- count = port->fifosize >> 1;
- do {
- ADM5120_UART_REG(port->iobase, ADM5120_UART_DATA) =
- xmit->buf[xmit->tail];
- xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
- port->icount.tx++;
- if (uart_circ_empty(xmit))
- break;
- } while (--count > 0);
-
- if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
- uart_write_wakeup(port);
-
- if (uart_circ_empty(xmit))
- adm5120ser_stop_tx(port);
-}
-
-static void adm5120ser_irq_modem(struct uart_port *port)
-{
- unsigned int status;
-
- status = ADM5120_UART_REG(port->iobase, ADM5120_UART_FR);
-
- if (status & ADM5120_UART_DCD)
- uart_handle_dcd_change(port, status & ADM5120_UART_DCD);
-
- if (status & ADM5120_UART_DSR)
- port->icount.dsr++;
-
- if (status & ADM5120_UART_CTS)
- uart_handle_cts_change(port, status & ADM5120_UART_CTS);
-
- wake_up_interruptible(&port->info->delta_msr_wait);
-}
-
-static irqreturn_t adm5120ser_irq(int irq, void *dev_id)
-{
- struct uart_port *port = dev_id;
- unsigned long ir = ADM5120_UART_REG(port->iobase, ADM5120_UART_IR);
-
- if (ir & (ADM5120_UART_RIS | ADM5120_UART_RTIS))
- adm5120ser_irq_rx(port);
- if (ir & ADM5120_UART_TIS)
- adm5120ser_irq_tx(port);
- if (ir & ADM5120_UART_MIS) {
- adm5120ser_irq_modem(port);
- ADM5120_UART_REG(port->iobase, ADM5120_UART_IR) = 0xff;
- }
-
- return IRQ_HANDLED;
-}
-
-static unsigned int adm5120ser_tx_empty(struct uart_port *port)
-{
- unsigned int fr = ADM5120_UART_REG(port->iobase, ADM5120_UART_FR);
- return (fr & ADM5120_UART_TXFE) ? TIOCSER_TEMT : 0;
-}
-
-static void adm5120ser_set_mctrl(struct uart_port *port, unsigned int mctrl)
-{
-}
-
-static unsigned int adm5120ser_get_mctrl(struct uart_port *port)
-{
- unsigned int result = 0;
- unsigned int fr = ADM5120_UART_REG(port->iobase, ADM5120_UART_FR);
-
- if (fr & ADM5120_UART_CTS)
- result |= TIOCM_CTS;
- if (fr & ADM5120_UART_DSR)
- result |= TIOCM_DSR;
- if (fr & ADM5120_UART_DCD)
- result |= TIOCM_CAR;
- return result;
-}
-
-static void adm5120ser_start_tx(struct uart_port *port)
-{
- ADM5120_UART_REG(port->iobase, ADM5120_UART_CR) |= ADM5120_UART_TIE;
-}
-
-static void adm5120ser_stop_rx(struct uart_port *port)
-{
- ADM5120_UART_REG(port->iobase, ADM5120_UART_CR) &= ~ADM5120_UART_RIE;
-}
-
-static void adm5120ser_enable_ms(struct uart_port *port)
-{
-}
-
-static void adm5120ser_break_ctl(struct uart_port *port, int break_state)
-{
- unsigned long flags;
- unsigned long lcrh;
-
- spin_lock_irqsave(&port->lock, flags);
- lcrh = ADM5120_UART_REG(port->iobase, ADM5120_UART_LCR_H);
- if (break_state == -1)
- lcrh |= ADM5120_UART_BRK;
- else
- lcrh &= ~ADM5120_UART_BRK;
- ADM5120_UART_REG(port->iobase, ADM5120_UART_LCR_H) = lcrh;
- spin_unlock_irqrestore(&port->lock, flags);
-}
-
-static int adm5120ser_startup(struct uart_port *port)
-{
- int ret;
-
- ret = request_irq(port->irq, adm5120ser_irq, 0, "ADM5120 UART", port);
- if (ret) {
- printk(KERN_ERR "Couldn't get irq %d\n", port->irq);
- return ret;
- }
- ADM5120_UART_REG(port->iobase, ADM5120_UART_LCR_H) |=
- ADM5120_UART_FIFO_EN;
- ADM5120_UART_REG(port->iobase, ADM5120_UART_CR) |=
- ADM5120_UART_EN | ADM5120_UART_IE;
- return 0;
-}
-
-static void adm5120ser_shutdown(struct uart_port *port)
-{
- ADM5120_UART_REG(port->iobase, ADM5120_UART_CR) &= ~ADM5120_UART_IE;
- free_irq(port->irq, port);
-}
-
-static void adm5120ser_set_termios(struct uart_port *port,
- struct termios *termios, struct termios *old)
-{
- unsigned int baud, quot, lcrh;
- unsigned long flags;
-
- termios->c_cflag |= CREAD;
-
- baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
- quot = uart_get_divisor(port, baud);
-
- lcrh = ADM5120_UART_FIFO_EN;
- switch (termios->c_cflag & CSIZE) {
- case CS5:
- lcrh |= ADM5120_UART_W5;
- break;
- case CS6:
- lcrh |= ADM5120_UART_W6;
- break;
- case CS7:
- lcrh |= ADM5120_UART_W7;
- break;
- default:
- lcrh |= ADM5120_UART_W8;
- break;
- }
- if (termios->c_cflag & CSTOPB)
- lcrh |= ADM5120_UART_STP2;
- if (termios->c_cflag & PARENB) {
- lcrh |= ADM5120_UART_PEN;
- if (!(termios->c_cflag & PARODD))
- lcrh |= ADM5120_UART_EPS;
- }
-
- spin_lock_irqsave(port->lock, flags);
-
- ADM5120_UART_REG(port->iobase, ADM5120_UART_LCR_H) = lcrh;
-
- /*
- * Update the per-port timeout.
- */
- uart_update_timeout(port, termios->c_cflag, baud);
-
- port->read_status_mask = ADM5120_UART_OE;
- if (termios->c_iflag & INPCK)
- port->read_status_mask |= ADM5120_UART_FE | ADM5120_UART_PE;
- if (termios->c_iflag & (BRKINT | PARMRK))
- port->read_status_mask |= ADM5120_UART_BE;
-
- /*
- * Characters to ignore
- */
- port->ignore_status_mask = 0;
- if (termios->c_iflag & IGNPAR)
- port->ignore_status_mask |= ADM5120_UART_FE | ADM5120_UART_PE;
- if (termios->c_iflag & IGNBRK) {
- port->ignore_status_mask |= ADM5120_UART_BE;
- /*
- * If we're ignoring parity and break indicators,
- * ignore overruns to (for real raw support).
- */
- if (termios->c_iflag & IGNPAR)
- port->ignore_status_mask |= ADM5120_UART_OE;
- }
-
- quot = ADM5120_UART_BAUD115200;
- ADM5120_UART_REG(port->iobase, ADM5120_UART_LCR_L) = quot & 0xff;
- ADM5120_UART_REG(port->iobase, ADM5120_UART_LCR_M) = quot >> 8;
-
- spin_unlock_irqrestore(&port->lock, flags);
-}
-
-static const char *adm5120ser_type(struct uart_port *port)
-{
- return port->type == PORT_ADM5120 ? "ADM5120" : NULL;
-}
-
-static void adm5120ser_config_port(struct uart_port *port, int flags)
-{
- if (flags & UART_CONFIG_TYPE)
- port->type = PORT_ADM5120;
-}
-
-static void adm5120ser_release_port(struct uart_port *port)
-{
- release_mem_region(port->iobase, ADM5120_UART_SIZE);
-}
-
-static int adm5120ser_request_port(struct uart_port *port)
-{
- return request_mem_region(port->iobase, ADM5120_UART_SIZE,
- "adm5120-uart") != NULL ? 0 : -EBUSY;
-}
-
-static struct uart_ops adm5120ser_ops = {
- .tx_empty = adm5120ser_tx_empty,
- .set_mctrl = adm5120ser_set_mctrl,
- .get_mctrl = adm5120ser_get_mctrl,
- .stop_tx = adm5120ser_stop_tx,
- .start_tx = adm5120ser_start_tx,
- .stop_rx = adm5120ser_stop_rx,
- .enable_ms = adm5120ser_enable_ms,
- .break_ctl = adm5120ser_break_ctl,
- .startup = adm5120ser_startup,
- .shutdown = adm5120ser_shutdown,
- .set_termios = adm5120ser_set_termios,
- .type = adm5120ser_type,
- .config_port = adm5120ser_config_port,
- .release_port = adm5120ser_release_port,
- .request_port = adm5120ser_request_port,
-};
-
-static void adm5120console_put(const char c)
-{
- while ((ADM5120_UART_REG(ADM5120_UART_BASE0, ADM5120_UART_FR) &
- ADM5120_UART_TXFF) != 0);
- ADM5120_UART_REG(ADM5120_UART_BASE0, ADM5120_UART_DATA) = c;
-}
-
-static void adm5120console_write(struct console *con, const char *s,
- unsigned int count)
-{
- while (count--) {
- if (*s == '\n')
- adm5120console_put('\r');
- adm5120console_put(*s);
- s++;
- }
-}
-
-static int __init adm5120console_setup(struct console *con, char *options)
-{
- /* Set to 115200 baud, 8N1 and enable FIFO */
- ADM5120_UART_REG(ADM5120_UART_BASE0, ADM5120_UART_LCR_L) =
- ADM5120_UART_BAUD115200 & 0xff;
- ADM5120_UART_REG(ADM5120_UART_BASE0, ADM5120_UART_LCR_M) =
- ADM5120_UART_BAUD115200 >> 8;
- ADM5120_UART_REG(ADM5120_UART_BASE0, ADM5120_UART_LCR_H) =
- ADM5120_UART_W8 | ADM5120_UART_FIFO_EN;
- /* Enable port */
- ADM5120_UART_REG(ADM5120_UART_BASE0, ADM5120_UART_CR) =
- ADM5120_UART_EN;
-
- return 0;
-}
-
-static struct uart_driver adm5120ser_reg;
-
-static struct console adm5120_serconsole = {
- .name = "ttyS",
- .write = adm5120console_write,
- .device = uart_console_device,
- .setup = adm5120console_setup,
- .flags = CON_PRINTBUFFER,
- .cflag = B115200 | CS8 | CREAD,
- .index = 0,
- .data = &adm5120ser_reg,
-};
-
-static int __init adm5120console_init(void)
-{
- register_console(&adm5120_serconsole);
- return 0;
-}
-
-console_initcall(adm5120console_init);
-
-
-static struct uart_port adm5120ser_ports[] = {
- {
- .iobase = ADM5120_UART_BASE0,
- .irq = ADM5120_UART_IRQ0,
- .uartclk = ADM5120_UARTCLK_FREQ,
- .fifosize = 16,
- .ops = &adm5120ser_ops,
- .line = 0,
- .flags = ASYNC_BOOT_AUTOCONF,
- },
-#if (CONFIG_ADM5120_NR_UARTS > 1)
- {
- .iobase = ADM5120_UART_BASE1,
- .irq = ADM5120_UART_IRQ1,
- .uartclk = ADM5120_UARTCLK_FREQ,
- .fifosize = 16,
- .ops = &adm5120ser_ops,
- .line = 1,
- .flags = ASYNC_BOOT_AUTOCONF,
- },
-#endif
-};
-
-static struct uart_driver adm5120ser_reg = {
- .owner = THIS_MODULE,
- .driver_name = "ttyS",
- .dev_name = "ttyS",
- .major = TTY_MAJOR,
- .minor = 64,
- .nr = CONFIG_ADM5120_NR_UARTS,
- .cons = &adm5120_serconsole,
-};
-
-static int __init adm5120ser_init(void)
-{
- int ret, i;
-
- ret = uart_register_driver(&adm5120ser_reg);
- if (!ret) {
- for (i = 0; i < CONFIG_ADM5120_NR_UARTS; i++)
- uart_add_one_port(&adm5120ser_reg, &adm5120ser_ports[i]);
- }
-
- return ret;
-}
-
-__initcall(adm5120ser_init);
+++ /dev/null
-/*
- * HCD driver for ADM5120 SoC
- *
- * Copyright (C) 2005 Jeroen Vreeken (pe1rxq@amsat.org)
- *
- * Based on the ADMtek 2.4 driver
- * (C) Copyright 2003 Junius Chen <juniusc@admtek.com.tw>
- * Which again was based on the ohci and uhci drivers.
- */
-
-#include <linux/autoconf.h>
-#include <linux/moduleparam.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/interrupt.h>
-#include <linux/usb.h>
-#include <linux/platform_device.h>
-
-#include "../core/hcd.h"
-
-MODULE_DESCRIPTION("ADM5120 USB Host Controller Driver");
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Jeroen Vreeken (pe1rxq@amsat.org)");
-
-#define ADMHCD_REG_CONTROL 0x00
-#define ADMHCD_REG_INTSTATUS 0x04
-#define ADMHCD_REG_INTENABLE 0x08
-#define ADMHCD_REG_HOSTCONTROL 0x10
-#define ADMHCD_REG_FMINTERVAL 0x18
-#define ADMHCD_REG_FMNUMBER 0x1c
-#define ADMHCD_REG_LSTHRESH 0x70
-#define ADMHCD_REG_RHDESCR 0x74
-#define ADMHCD_REG_PORTSTATUS0 0x78
-#define ADMHCD_REG_PORTSTATUS1 0x7c
-#define ADMHCD_REG_HOSTHEAD 0x80
-
-
-#define ADMHCD_NUMPORTS 2
-
-#define ADMHCD_HOST_EN 0x00000001 /* Host enable */
-#define ADMHCD_SW_INTREQ 0x00000002 /* request software int */
-#define ADMHCD_SW_RESET 0x00000008 /* Reset */
-
-#define ADMHCD_INT_TD 0x00100000 /* TD completed */
-#define ADMHCD_INT_SW 0x20000000 /* software interrupt */
-#define ADMHCD_INT_FATAL 0x40000000 /* Fatal interrupt */
-#define ADMHCD_INT_ACT 0x80000000 /* Interrupt active */
-
-#define ADMHCD_STATE_RST 0x00000000 /* bus state reset */
-#define ADMHCD_STATE_RES 0x00000001 /* bus state resume */
-#define ADMHCD_STATE_OP 0x00000002 /* bus state operational */
-#define ADMHCD_STATE_SUS 0x00000003 /* bus state suspended */
-#define ADMHCD_DMA_EN 0x00000004 /* enable dma engine */
-
-#define ADMHCD_NPS 0x00000020 /* No Power Switch */
-#define ADMHCD_LPSC 0x04000000 /* Local power switch change */
-
-#define ADMHCD_CCS 0x00000001 /* current connect status */
-#define ADMHCD_PES 0x00000002 /* port enable status */
-#define ADMHCD_PSS 0x00000004 /* port suspend status */
-#define ADMHCD_POCI 0x00000008 /* port overcurrent indicator */
-#define ADMHCD_PRS 0x00000010 /* port reset status */
-#define ADMHCD_PPS 0x00000100 /* port power status */
-#define ADMHCD_LSDA 0x00000200 /* low speed device attached */
-#define ADMHCD_CSC 0x00010000 /* connect status change */
-#define ADMHCD_PESC 0x00020000 /* enable status change */
-#define ADMHCD_PSSC 0x00040000 /* suspend status change */
-#define ADMHCD_OCIC 0x00080000 /* overcurrent change*/
-#define ADMHCD_PRSC 0x00100000 /* reset status change */
-
-
-struct admhcd_ed {
- /* Don't change first four, they used for DMA */
- u32 control;
- struct admhcd_td *tail;
- struct admhcd_td *head;
- struct admhcd_ed *next;
- /* the rest is for the driver only: */
- struct admhcd_td *cur;
- struct usb_host_endpoint *ep;
- struct urb *urb;
- struct admhcd_ed *real;
-} __attribute__ ((packed));
-
-#define ADMHCD_ED_EPSHIFT 7 /* Shift for endpoint number */
-#define ADMHCD_ED_INT 0x00000800 /* Is this an int endpoint */
-#define ADMHCD_ED_SPEED 0x00002000 /* Is it a high speed dev? */
-#define ADMHCD_ED_SKIP 0x00004000 /* Skip this ED */
-#define ADMHCD_ED_FORMAT 0x00008000 /* Is this an isoc endpoint */
-#define ADMHCD_ED_MAXSHIFT 16 /* Shift for max packet size */
-
-struct admhcd_td {
- /* Don't change first four, they are used for DMA */
- u32 control;
- u32 buffer;
- u32 buflen;
- struct admhcd_td *next;
- /* the rest is for the driver only: */
- struct urb *urb;
- struct admhcd_td *real;
-} __attribute__ ((packed));
-
-#define ADMHCD_TD_OWN 0x80000000
-#define ADMHCD_TD_TOGGLE 0x00000000
-#define ADMHCD_TD_DATA0 0x01000000
-#define ADMHCD_TD_DATA1 0x01800000
-#define ADMHCD_TD_OUT 0x00200000
-#define ADMHCD_TD_IN 0x00400000
-#define ADMHCD_TD_SETUP 0x00000000
-#define ADMHCD_TD_ISO 0x00010000
-#define ADMHCD_TD_R 0x00040000
-#define ADMHCD_TD_INTEN 0x00010000
-
-static int admhcd_td_err[16] = {
- 0, /* No */
- -EREMOTEIO, /* CRC */
- -EREMOTEIO, /* bit stuff */
- -EREMOTEIO, /* data toggle */
- -EPIPE, /* stall */
- -ETIMEDOUT, /* timeout */
- -EPROTO, /* pid err */
- -EPROTO, /* unexpected pid */
- -EREMOTEIO, /* data overrun */
- -EREMOTEIO, /* data underrun */
- -ETIMEDOUT, /* 1010 */
- -ETIMEDOUT, /* 1011 */
- -EREMOTEIO, /* buffer overrun */
- -EREMOTEIO, /* buffer underrun */
- -ETIMEDOUT, /* 1110 */
- -ETIMEDOUT, /* 1111 */
-};
-
-#define ADMHCD_TD_ERRMASK 0x38000000
-#define ADMHCD_TD_ERRSHIFT 27
-
-#define TD(td) ((struct admhcd_td *)(((u32)(td)) & ~0xf))
-#define ED(ed) ((struct admhcd_ed *)(((u32)(ed)) & ~0xf))
-
-struct admhcd {
- u32 base;
- u32 dma_en;
- spinlock_t lock;
- unsigned long flags;
-};
-
-#define hcd_to_admhcd(hcd) ((struct admhcd *)(hcd)->hcd_priv)
-
-static char hcd_name[] = "adm5120-hcd";
-
-static u32 admhcd_reg_get(struct admhcd *ahcd, int reg)
-{
- return *(volatile u32 *)KSEG1ADDR(ahcd->base+reg);
-}
-
-static void admhcd_reg_set(struct admhcd *ahcd, int reg, u32 val)
-{
- *(volatile u32 *)KSEG1ADDR(ahcd->base+reg) = val;
-}
-
-static void admhcd_lock(struct admhcd *ahcd)
-{
- spin_lock_irqsave(&ahcd->lock, ahcd->flags);
- ahcd->dma_en = admhcd_reg_get(ahcd, ADMHCD_REG_HOSTCONTROL) &
- ADMHCD_DMA_EN;
- admhcd_reg_set(ahcd, ADMHCD_REG_HOSTCONTROL, ADMHCD_STATE_OP);
-}
-
-static void admhcd_unlock(struct admhcd *ahcd)
-{
- admhcd_reg_set(ahcd, ADMHCD_REG_HOSTCONTROL,
- ADMHCD_STATE_OP | ahcd->dma_en);
- spin_unlock_irqrestore(&ahcd->lock, ahcd->flags);
-}
-
-static struct admhcd_td *admhcd_td_alloc(struct admhcd_ed *ed, struct urb *urb)
-{
- struct admhcd_td *tdn, *td;
-
- tdn = kmalloc(sizeof(struct admhcd_td), GFP_ATOMIC);
- if (!tdn)
- return NULL;
- tdn->real = tdn;
- tdn = (struct admhcd_td *)KSEG1ADDR(tdn);
- memset(tdn, 0, sizeof(struct admhcd_td));
- if (ed->cur == NULL) {
- ed->cur = tdn;
- ed->head = tdn;
- ed->tail = tdn;
- td = tdn;
- } else {
- /* Supply back the old tail and link in new td as tail */
- td = TD(ed->tail);
- TD(ed->tail)->next = tdn;
- ed->tail = tdn;
- }
- td->urb = urb;
-
- return td;
-}
-
-static void admhcd_td_free(struct admhcd_ed *ed, struct urb *urb)
-{
- struct admhcd_td *td, **tdp;
-
- if (urb == NULL)
- ed->control |= ADMHCD_ED_SKIP;
- tdp = &ed->cur;
- td = ed->cur;
- do {
- if (td->urb == urb)
- break;
- tdp = &td->next;
- td = TD(td->next);
- } while (td);
- while (td && td->urb == urb) {
- *tdp = TD(td->next);
- kfree(td->real);
- td = *tdp;
- }
-}
-
-/* Find an endpoint's descriptor, if needed allocate a new one and link it
- in the DMA chain
- */
-static struct admhcd_ed *admhcd_get_ed(struct admhcd *ahcd,
- struct usb_host_endpoint *ep, struct urb *urb)
-{
- struct admhcd_ed *hosthead;
- struct admhcd_ed *found = NULL, *ed = NULL;
- unsigned int pipe = urb->pipe;
-
- admhcd_lock(ahcd);
- hosthead = (struct admhcd_ed *)admhcd_reg_get(ahcd, ADMHCD_REG_HOSTHEAD);
- if (hosthead) {
- for (ed = hosthead;; ed = ED(ed->next)) {
- if (ed->ep == ep) {
- found = ed;
- break;
- }
- if (ED(ed->next) == hosthead)
- break;
- }
- }
- if (!found) {
- found = kmalloc(sizeof(struct admhcd_ed), GFP_ATOMIC);
- if (!found)
- goto out;
- memset(found, 0, sizeof(struct admhcd_ed));
- found->real = found;
- found->ep = ep;
- found = (struct admhcd_ed *)KSEG1ADDR(found);
- found->control = usb_pipedevice(pipe) |
- (usb_pipeendpoint(pipe) << ADMHCD_ED_EPSHIFT) |
- (usb_pipeint(pipe) ? ADMHCD_ED_INT : 0) |
- (urb->dev->speed == USB_SPEED_FULL ? ADMHCD_ED_SPEED : 0) |
- (usb_pipeisoc(pipe) ? ADMHCD_ED_FORMAT : 0) |
- (usb_maxpacket(urb->dev, pipe, usb_pipeout(pipe)) << ADMHCD_ED_MAXSHIFT);
- /* Alloc first dummy td */
- admhcd_td_alloc(found, NULL);
- if (hosthead) {
- found->next = hosthead;
- ed->next = found;
- } else {
- found->next = found;
- admhcd_reg_set(ahcd, ADMHCD_REG_HOSTHEAD, (u32)found);
- }
- }
-out:
- admhcd_unlock(ahcd);
- return found;
-}
-
-static struct admhcd_td *admhcd_td_fill(u32 control, struct admhcd_td *td,
- dma_addr_t data, int len)
-{
- td->buffer = data;
- td->buflen = len;
- td->control = control;
- return TD(td->next);
-}
-
-static void admhcd_ed_start(struct admhcd *ahcd, struct admhcd_ed *ed)
-{
- struct admhcd_td *td = ed->cur;
-
- if (ed->urb)
- return;
- if (td->urb) {
- ed->urb = td->urb;
- while (1) {
- td->control |= ADMHCD_TD_OWN;
- if (TD(td->next)->urb != td->urb) {
- td->buflen |= ADMHCD_TD_INTEN;
- break;
- }
- td = TD(td->next);
- }
- }
- ed->head = TD(ed->head);
- ahcd->dma_en |= ADMHCD_DMA_EN;
-}
-
-static irqreturn_t adm5120hcd_irq(int irq, void *ptr, struct pt_regs *regs)
-{
- struct usb_hcd *hcd = (struct usb_hcd *)ptr;
- struct admhcd *ahcd = hcd_to_admhcd(hcd);
- u32 intstatus;
-
- intstatus = admhcd_reg_get(ahcd, ADMHCD_REG_INTSTATUS);
- if (intstatus & ADMHCD_INT_FATAL) {
- admhcd_reg_set(ahcd, ADMHCD_REG_INTSTATUS, ADMHCD_INT_FATAL);
- //
- }
- if (intstatus & ADMHCD_INT_SW) {
- admhcd_reg_set(ahcd, ADMHCD_REG_INTSTATUS, ADMHCD_INT_SW);
- //
- }
- if (intstatus & ADMHCD_INT_TD) {
- struct admhcd_ed *ed, *head;
-
- admhcd_reg_set(ahcd, ADMHCD_REG_INTSTATUS, ADMHCD_INT_TD);
-
- head = (struct admhcd_ed *)admhcd_reg_get(ahcd, ADMHCD_REG_HOSTHEAD);
- ed = head;
- if (ed) do {
- /* Is it a finished TD? */
- if (ed->urb && !(ed->cur->control & ADMHCD_TD_OWN)) {
- struct admhcd_td *td;
- int error;
-
- td = ed->cur;
- error = (td->control & ADMHCD_TD_ERRMASK) >>
- ADMHCD_TD_ERRSHIFT;
- ed->urb->status = admhcd_td_err[error];
- admhcd_td_free(ed, ed->urb);
- // Calculate real length!!!
- ed->urb->actual_length = ed->urb->transfer_buffer_length;
- ed->urb->hcpriv = NULL;
- usb_hcd_giveback_urb(hcd, ed->urb);
- ed->urb = NULL;
- }
- admhcd_ed_start(ahcd, ed);
- ed = ED(ed->next);
- } while (ed != head);
- }
-
- return IRQ_HANDLED;
-}
-
-static int admhcd_urb_enqueue(struct usb_hcd *hcd, struct usb_host_endpoint *ep,
- struct urb *urb, int mem_flags)
-{
- struct admhcd *ahcd = hcd_to_admhcd(hcd);
- struct admhcd_ed *ed;
- struct admhcd_td *td;
- int size = 0, i, zero = 0, ret = 0;
- unsigned int pipe = urb->pipe, toggle = 0;
- dma_addr_t data = (dma_addr_t)urb->transfer_buffer;
- int data_len = urb->transfer_buffer_length;
-
- ed = admhcd_get_ed(ahcd, ep, urb);
- if (!ed)
- return -ENOMEM;
-
- switch(usb_pipetype(pipe)) {
- case PIPE_CONTROL:
- size = 2;
- case PIPE_INTERRUPT:
- case PIPE_BULK:
- default:
- size += urb->transfer_buffer_length / 4096;
- if (urb->transfer_buffer_length % 4096)
- size++;
- if (size == 0)
- size++;
- else if (urb->transfer_flags & URB_ZERO_PACKET &&
- !(urb->transfer_buffer_length %
- usb_maxpacket(urb->dev, pipe, usb_pipeout(pipe)))) {
- size++;
- zero = 1;
- }
- break;
- case PIPE_ISOCHRONOUS:
- size = urb->number_of_packets;
- break;
- }
-
- admhcd_lock(ahcd);
- /* Remember the first td */
- td = admhcd_td_alloc(ed, urb);
- if (!td) {
- ret = -ENOMEM;
- goto out;
- }
- /* Allocate additionall tds first */
- for (i = 1; i < size; i++) {
- if (admhcd_td_alloc(ed, urb) == NULL) {
- admhcd_td_free(ed, urb);
- ret = -ENOMEM;
- goto out;
- }
- }
-
- if (usb_gettoggle(urb->dev, usb_pipeendpoint(pipe), usb_pipeout(pipe)))
- toggle = ADMHCD_TD_TOGGLE;
- else {
- toggle = ADMHCD_TD_DATA0;
- usb_settoggle(urb->dev, usb_pipeendpoint(pipe),
- usb_pipeout(pipe), 1);
- }
-
- switch(usb_pipetype(pipe)) {
- case PIPE_CONTROL:
- td = admhcd_td_fill(ADMHCD_TD_SETUP | ADMHCD_TD_DATA0,
- td, (dma_addr_t)urb->setup_packet, 8);
- while (data_len > 0) {
- td = admhcd_td_fill(ADMHCD_TD_DATA1
- | ADMHCD_TD_R |
- (usb_pipeout(pipe) ?
- ADMHCD_TD_OUT : ADMHCD_TD_IN), td,
- data, data_len % 4097);
- data_len -= 4096;
- }
- admhcd_td_fill(ADMHCD_TD_DATA1 | (usb_pipeout(pipe) ?
- ADMHCD_TD_IN : ADMHCD_TD_OUT), td,
- data, 0);
- break;
- case PIPE_INTERRUPT:
- case PIPE_BULK:
- //info ok for interrupt?
- i = 0;
- while(data_len > 4096) {
- td = admhcd_td_fill((usb_pipeout(pipe) ?
- ADMHCD_TD_OUT :
- ADMHCD_TD_IN | ADMHCD_TD_R) |
- (i ? ADMHCD_TD_TOGGLE : toggle), td,
- data, 4096);
- data += 4096;
- data_len -= 4096;
- i++;
- }
- td = admhcd_td_fill((usb_pipeout(pipe) ?
- ADMHCD_TD_OUT : ADMHCD_TD_IN) |
- (i ? ADMHCD_TD_TOGGLE : toggle), td, data, data_len);
- i++;
- if (zero)
- admhcd_td_fill((usb_pipeout(pipe) ?
- ADMHCD_TD_OUT : ADMHCD_TD_IN) |
- (i ? ADMHCD_TD_TOGGLE : toggle), td, 0, 0);
- break;
- case PIPE_ISOCHRONOUS:
- for (i = 0; i < urb->number_of_packets; i++) {
- td = admhcd_td_fill(ADMHCD_TD_ISO |
- ((urb->start_frame + i) & 0xffff), td,
- data + urb->iso_frame_desc[i].offset,
- urb->iso_frame_desc[i].length);
- }
- break;
- }
- urb->hcpriv = ed;
- admhcd_ed_start(ahcd, ed);
-out:
- admhcd_unlock(ahcd);
- return ret;
-}
-
-static int admhcd_urb_dequeue(struct usb_hcd *hcd, struct urb *urb)
-{
- struct admhcd *ahcd = hcd_to_admhcd(hcd);
- struct admhcd_ed *ed;
-
- admhcd_lock(ahcd);
-
- ed = urb->hcpriv;
- if (ed && ed->urb != urb)
- admhcd_td_free(ed, urb);
-
- admhcd_unlock(ahcd);
- return 0;
-}
-
-static void admhcd_endpoint_disable(struct usb_hcd *hcd, struct usb_host_endpoint *ep)
-{
- struct admhcd *ahcd = hcd_to_admhcd(hcd);
- struct admhcd_ed *ed, *edt, *head;
-
- admhcd_lock(ahcd);
-
- head = (struct admhcd_ed *)admhcd_reg_get(ahcd, ADMHCD_REG_HOSTHEAD);
- if (!head)
- goto out;
- for (ed = head; ED(ed->next) != head; ed = ED(ed->next))
- if (ed->ep == ep)
- break;
- if (ed->ep != ep)
- goto out;
- while (ed->cur)
- admhcd_td_free(ed, ed->cur->urb);
- if (head == ed) {
- if (ED(ed->next) == ed) {
- admhcd_reg_set(ahcd, ADMHCD_REG_HOSTHEAD, 0);
- ahcd->dma_en = 0;
- goto out_free;
- }
- head = ED(ed->next);
- for (edt = head; ED(edt->next) != head; edt = ED(edt->next));
- edt->next = ED(ed->next);
- admhcd_reg_set(ahcd, ADMHCD_REG_HOSTHEAD, (u32)ed->next);
- goto out_free;
- }
- for (edt = head; edt->next != ed; edt = edt->next);
- edt->next = ed->next;
-out_free:
- kfree(ed->real);
-out:
- admhcd_unlock(ahcd);
-}
-
-static int admhcd_get_frame_number(struct usb_hcd *hcd)
-{
- struct admhcd *ahcd = hcd_to_admhcd(hcd);
-
- return admhcd_reg_get(ahcd, ADMHCD_REG_FMNUMBER) & 0x0000ffff;
-}
-
-static int admhcd_hub_status_data(struct usb_hcd *hcd, char *buf)
-{
- struct admhcd *ahcd = hcd_to_admhcd(hcd);
- int port;
-
- *buf = 0;
- for (port = 0; port < ADMHCD_NUMPORTS; port++) {
- if (admhcd_reg_get(ahcd, ADMHCD_REG_PORTSTATUS0 + port*4) &
- (ADMHCD_CSC | ADMHCD_PESC | ADMHCD_PSSC | ADMHCD_OCIC |
- ADMHCD_PRSC))
- *buf |= (1 << (port + 1));
- }
- return !!*buf;
-}
-
-static __u8 root_hub_hub_des[] = {
- 0x09, /* __u8 bLength; */
- 0x29, /* __u8 bDescriptorType; Hub-descriptor */
- 0x02, /* __u8 bNbrPorts; */
- 0x0a, 0x00, /* __u16 wHubCharacteristics; */
- 0x01, /* __u8 bPwrOn2pwrGood; 2ms */
- 0x00, /* __u8 bHubContrCurrent; 0mA */
- 0x00, /* __u8 DeviceRemovable; */
- 0xff, /* __u8 PortPwrCtrlMask; */
-};
-
-static int admhcd_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
- u16 wIndex, char *buf, u16 wLength)
-{
- struct admhcd *ahcd = hcd_to_admhcd(hcd);
- int retval = 0, len;
- unsigned int port = wIndex -1;
-
- switch (typeReq) {
-
- case GetHubStatus:
- *(__le32 *)buf = cpu_to_le32(0);
- break;
- case GetPortStatus:
- if (port >= ADMHCD_NUMPORTS)
- goto err;
- *(__le32 *)buf = cpu_to_le32(
- admhcd_reg_get(ahcd, ADMHCD_REG_PORTSTATUS0 + port*4));
- break;
- case SetHubFeature: /* We don't implement these */
- case ClearHubFeature:
- switch (wValue) {
- case C_HUB_OVER_CURRENT:
- case C_HUB_LOCAL_POWER:
- break;
- default:
- goto err;
- }
- case SetPortFeature:
- if (port >= ADMHCD_NUMPORTS)
- goto err;
-
- switch (wValue) {
- case USB_PORT_FEAT_SUSPEND:
- admhcd_reg_set(ahcd, ADMHCD_REG_PORTSTATUS0 + port*4,
- ADMHCD_PSS);
- break;
- case USB_PORT_FEAT_RESET:
- if (admhcd_reg_get(ahcd, ADMHCD_REG_PORTSTATUS0 + port*4)
- & ADMHCD_CCS) {
- admhcd_reg_set(ahcd,
- ADMHCD_REG_PORTSTATUS0 + port*4,
- ADMHCD_PRS | ADMHCD_CSC);
- mdelay(50);
- admhcd_reg_set(ahcd,
- ADMHCD_REG_PORTSTATUS0 + port*4,
- ADMHCD_PES | ADMHCD_CSC);
- }
- break;
- case USB_PORT_FEAT_POWER:
- admhcd_reg_set(ahcd, ADMHCD_REG_PORTSTATUS0 + port*4,
- ADMHCD_PPS);
- break;
- default:
- goto err;
- }
- break;
- case ClearPortFeature:
- if (port >= ADMHCD_NUMPORTS)
- goto err;
-
- switch (wValue) {
- case USB_PORT_FEAT_ENABLE:
- admhcd_reg_set(ahcd, ADMHCD_REG_PORTSTATUS0 + port*4,
- ADMHCD_CCS);
- break;
- case USB_PORT_FEAT_C_ENABLE:
- admhcd_reg_set(ahcd, ADMHCD_REG_PORTSTATUS0 + port*4,
- ADMHCD_PESC);
- break;
- case USB_PORT_FEAT_SUSPEND:
- admhcd_reg_set(ahcd, ADMHCD_REG_PORTSTATUS0 + port*4,
- ADMHCD_POCI);
- break;
- case USB_PORT_FEAT_C_SUSPEND:
- admhcd_reg_set(ahcd, ADMHCD_REG_PORTSTATUS0 + port*4,
- ADMHCD_PSSC);
- case USB_PORT_FEAT_POWER:
- admhcd_reg_set(ahcd, ADMHCD_REG_PORTSTATUS0 + port*4,
- ADMHCD_LSDA);
- break;
- case USB_PORT_FEAT_C_CONNECTION:
- admhcd_reg_set(ahcd, ADMHCD_REG_PORTSTATUS0 + port*4,
- ADMHCD_CSC);
- break;
- case USB_PORT_FEAT_C_OVER_CURRENT:
- admhcd_reg_set(ahcd, ADMHCD_REG_PORTSTATUS0 + port*4,
- ADMHCD_OCIC);
- break;
- case USB_PORT_FEAT_C_RESET:
- admhcd_reg_set(ahcd, ADMHCD_REG_PORTSTATUS0 + port*4,
- ADMHCD_PRSC);
- break;
- default:
- goto err;
- }
- break;
- case GetHubDescriptor:
- len = min_t(unsigned int, sizeof(root_hub_hub_des), wLength);
- memcpy(buf, root_hub_hub_des, len);
- break;
- default:
-err:
- retval = -EPIPE;
- }
-
- return retval;
-}
-
-static struct hc_driver adm5120_hc_driver = {
- .description = hcd_name,
- .product_desc = "ADM5120 HCD",
- .hcd_priv_size = sizeof(struct admhcd),
- .flags = HCD_USB11,
- .urb_enqueue = admhcd_urb_enqueue,
- .urb_dequeue = admhcd_urb_dequeue,
- .endpoint_disable = admhcd_endpoint_disable,
- .get_frame_number = admhcd_get_frame_number,
- .hub_status_data = admhcd_hub_status_data,
- .hub_control = admhcd_hub_control,
-};
-
-static int __init adm5120hcd_probe(struct platform_device *pdev)
-{
- struct usb_hcd *hcd;
- struct admhcd *ahcd;
- struct usb_device *udev;
- int err = 0;
-
- if (!request_mem_region(pdev->resource[0].start,
- pdev->resource[0].end - pdev->resource[0].start, hcd_name)) {
- pr_debug("couldn't request mem\n");
- err = -EBUSY;
- goto out;
- }
-
- //hcd = usb_create_hcd(&adm5120_hc_driver, pdev, pdev->bus_id);
- if (!hcd)
- goto out_mem;
-
- ahcd = hcd_to_admhcd(hcd);
- dev_set_drvdata(pdev, ahcd);
- hcd->self.controller = pdev;
- //hcd->self.bus_name = pdev->bus_id;
- hcd->irq = pdev->resource[1].start;
- hcd->regs = (void *)pdev->resource[0].start;
- hcd->product_desc = hcd_name;
- ahcd->base = pdev->resource[0].start;
-
- if (request_irq(pdev->resource[1].start, adm5120hcd_irq, 0, hcd_name,
- hcd)) {
- pr_debug("couldn't request irq\n");
- err = -EBUSY;
- goto out_hcd;
- }
-
- //err = usb_register_bus(&hcd->self);
- //if (err < 0)
- // goto out_irq;
-
- spin_lock_init(&ahcd->lock);
-
- admhcd_reg_set(ahcd, ADMHCD_REG_INTENABLE, 0);
- mdelay(10);
- admhcd_reg_set(ahcd, ADMHCD_REG_CONTROL, ADMHCD_SW_RESET);
- while (admhcd_reg_get(ahcd, ADMHCD_REG_CONTROL) & ADMHCD_SW_RESET)
- mdelay(1);
-
- admhcd_reg_set(ahcd, ADMHCD_REG_CONTROL, ADMHCD_HOST_EN);
- admhcd_reg_set(ahcd, ADMHCD_REG_HOSTHEAD, 0x00000000);
- admhcd_reg_set(ahcd, ADMHCD_REG_FMINTERVAL, 0x20002edf);
- admhcd_reg_set(ahcd, ADMHCD_REG_LSTHRESH, 0x628);
- admhcd_reg_set(ahcd, ADMHCD_REG_INTENABLE,
- ADMHCD_INT_ACT | ADMHCD_INT_FATAL | ADMHCD_INT_SW | ADMHCD_INT_TD);
- admhcd_reg_set(ahcd, ADMHCD_REG_INTSTATUS,
- ADMHCD_INT_ACT | ADMHCD_INT_FATAL | ADMHCD_INT_SW | ADMHCD_INT_TD);
- admhcd_reg_set(ahcd, ADMHCD_REG_RHDESCR, ADMHCD_NPS | ADMHCD_LPSC);
- admhcd_reg_set(ahcd, ADMHCD_REG_HOSTCONTROL, ADMHCD_STATE_OP);
-
- udev = usb_alloc_dev(NULL, &hcd->self, 0);
- if (!udev) {
- err = -ENOMEM;
- goto out_bus;
- }
-
- udev->speed = USB_SPEED_FULL;
- hcd->state = HC_STATE_RUNNING;
-
- //err = hcd_register_root(udev, hcd);
- //if (err != 0) {
- // usb_put_dev(udev);
- // goto out_dev;
- //}
-
- return 0;
-
-out_dev:
- usb_put_dev(udev);
-out_bus:
- //usb_deregister_bus(&hcd->self);
-out_irq:
- free_irq(pdev->resource[1].start, hcd);
-out_hcd:
- usb_put_hcd(hcd);
-out_mem:
- release_mem_region(pdev->resource[0].start,
- pdev->resource[0].end - pdev->resource[0].start);
-out:
- return err;
-}
-
-static int __init_or_module adm5120hcd_remove(struct platform_device *pdev)
-{
- device_init_wakeup(&pdev->dev, 0);
-}
-
-static struct platform_driver adm5120hcd_driver = {
- .probe = adm5120hcd_probe,
- .remove = adm5120hcd_remove,
- .driver = {
- .name = "adm5120-hcd",
- .owner = THIS_MODULE,
- },
-};
-
-static int __init adm5120hcd_init(void)
-{
- if (usb_disabled())
- return -ENODEV;
-
- return platform_driver_register(&adm5120hcd_driver);
-}
-
-static void __exit adm5120hcd_exit(void)
-{
- platform_driver_unregister(&adm5120hcd_driver);
-}
-
-module_init(adm5120hcd_init);
-module_exit(adm5120hcd_exit);
+++ /dev/null
-/*
- * $Id$
- *
- * ADM5120 SoC definitions
- *
- * This file defines some constants specific to the ADM5120 SoC
- *
- * Copyright (C) 2007 OpenWrt.org
- * Copyright (C) 2007 Gabor Juhos <juhosg@freemail.hu>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the
- * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
- * Boston, MA 02110-1301, USA.
- */
-#ifndef _ADM5120_DEFS_H
-#define _ADM5120_DEFS_H
-
-#define ADM5120_SDRAM0_BASE 0x00000000
-#define ADM5120_SDRAM1_BASE 0x01000000
-#define ADM5120_SRAM1_BASE 0x10000000
-#define ADM5120_MPMC_BASE 0x11000000
-#define ADM5120_USBC_BASE 0x11200000
-#define ADM5120_PCIMEM_BASE 0x11400000
-#define ADM5120_PCIIO_BASE 0x11500000
-#define ADM5120_PCICFG_ADDR 0x115FFFF0
-#define ADM5120_PCICFG_DATA 0x115FFFF8
-#define ADM5120_SWITCH_BASE 0x12000000
-#define ADM5120_INTC_BASE 0x12200000
-#define ADM5120_UART0_BASE 0x12600000
-#define ADM5120_UART1_BASE 0x12800000
-#define ADM5120_SRAM0_BASE 0x1FC00000
-
-#define ADM5120_MPMC_SIZE 0x1000
-#define ADM5120_USBC_SIZE 0x84
-#define ADM5120_PCIMEM_SIZE (ADM5120_PCIIO_BASE - ADM5120_PCIMEM_BASE)
-#define ADM5120_PCIIO_SIZE (ADM5120_PCICFG_ADDR - ADM5120_PCIIO_BASE)
-#define ADM5120_PCICFG_SIZE 0x10
-#define ADM5120_SWITCH_SIZE 0x114
-#define ADM5120_INTC_SIZE 0x28
-#define ADM5120_UART_SIZE 0x20
-
-#define ADM5120_CLK_175 175000000
-#define ADM5120_CLK_200 200000000
-#define ADM5120_CLK_225 225000000
-#define ADM5120_CLK_250 250000000
-
-#define ADM5120_UART_CLOCK 62500000
-
-#endif /* _ADM5120_DEFS_H */
+++ /dev/null
-/*
- * $Id$
- *
- * Copyright (C) 2007 OpenWrt.org
- * Copyright (C) Gabor Juhos <juhosg@freemail.hu>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#ifndef _ADM5120_INFO_H
-#define _ADM5120_INFO_H
-
-#include <linux/types.h>
-
-struct adm5120_info {
- unsigned int product_code;
- unsigned int revision;
- unsigned int cpu_package;
- unsigned int nand_boot;
- unsigned long cpu_speed;
- unsigned int boot_loader;
- unsigned int board_type;
- unsigned int num_iface;
-};
-
-#define CPU_SPEED_175 175000000
-#define CPU_SPEED_200 200000000
-#define CPU_SPEED_225 225000000
-#define CPU_SPEED_250 250000000
-
-#define CPU_PACKAGE_PQFP 0
-#define CPU_PACKAGE_BGA 1
-
-#define BOOT_LOADER_UNKNOWN 0
-#define BOOT_LOADER_CFE 1
-#define BOOT_LOADER_UBOOT 2
-#define BOOT_LOADER_MYLOADER 3
-#define BOOT_LOADER_ROUTERBOOT 4
-#define BOOT_LOADER_LAST 4
-
-#define BOARD_TYPE_UNKNOWN 0
-#define BOARD_TYPE_WP54G_WRT 1
-#define BOARD_TYPE_WP54G 2
-#define BOARD_TYPE_WP54AG 3
-#define BOARD_TYPE_WPP54G 4
-#define BOARD_TYPE_WPP54AG 5
-#define BOARD_TYPE_NP28G 6
-#define BOARD_TYPE_NP28GHS 7
-#define BOARD_TYPE_NP27G 8
-#define BOARD_TYPE_WP54Gv1C 9
-#define BOARD_TYPE_RB_111 10
-#define BOARD_TYPE_RB_112 11
-#define BOARD_TYPE_RB_133 12
-#define BOARD_TYPE_RB_133C 13
-#define BOARD_TYPE_RB_150 14
-#define BOARD_TYPE_RB_153 15
-#define BOART_TYPE_LAST 15
-
-extern struct adm5120_info adm5120_info;
-extern void adm5120_info_init(void);
-
-static inline int adm5120_has_pci(void)
-{
- return (adm5120_info.cpu_package == CPU_PACKAGE_BGA);
-}
-
-#endif /* _ADM5120_INFO_H */
+++ /dev/null
-/*
- * ADM5120 ethernet switch definitions
- *
- * This header file defines the hardware registers of the ADM5120 SoC
- * built-in Ethernet switch.
- *
- * Copyright (C) 2007 OpenWrt.org
- * Copyright (C) 2007 Gabor Juhos <juhosg@freemail.hu>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the
- * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
- * Boston, MA 02110-1301, USA.
- */
-
-#ifndef _ADM5120_SWITCH_H
-#define _ADM5120_SWITCH_H
-
-#define BITMASK(len) ((1 << (len))-1)
-#define ONEBIT(at) (1 << (at))
-
-/* Switch register offsets */
-#define SWITCH_REG_CODE 0x0000
-#define SWITCH_REG_SOFT_RESET 0x0004
-#define SWITCH_REG_MEMCTRL 0x001C
-#define SWITCH_REG_CPUP_CONF 0x0024
-#define SWITCH_REG_PORT_CONF0 0x0028
-#define SWITCH_REG_PORT_CONF1 0x002C
-#define SWITCH_REG_PORT_CONF2 0x0030
-#define SWITCH_REG_VLAN_G1 0x0040
-#define SWITCH_REG_VLAN_G2 0x0044
-#define SWITCH_REG_SEND_TRIG 0x0048
-#define SWITCH_REG_MAC_WT0 0x0058
-#define SWITCH_REG_MAC_WT1 0x005C
-#define SWITCH_REG_PHY_CNTL0 0x0068
-#define SWITCH_REG_PHY_CNTL1 0x006C
-#define SWITCH_REG_PHY_CNTL2 0x007C
-#define SWITCH_REG_PHY_CNTL3 0x0080
-#define SWITCH_REG_PRI_CNTL 0x0084
-#define SWITCH_REG_INT_STATUS 0x00B0
-#define SWITCH_REG_INT_MASK 0x00B4
-#define SWITCH_REG_GPIO_CONF0 0x00B8
-#define SWITCH_REG_GPIO_CONF2 0x00BC
-#define SWITCH_REG_WDOG0 0x00C0
-#define SWITCH_REG_WDOG1 0x00C4
-#define SWITCH_REG_PHY_CNTL4 0x00A0
-
-#define SWITCH_REG_SEND_HBADDR 0x00D0
-#define SWITCH_REG_SEND_LBADDR 0x00D4
-#define SWITCH_REG_RECV_HBADDR 0x00D8
-#define SWITCH_REG_RECV_LBADDR 0x00DC
-
-#define SWITCH_REG_TIMER_INT 0x00F0
-#define SWITCH_REG_TIMER 0x00F4
-
-#define SWITCH_REG_PORT0_LED 0x0100
-#define SWITCH_REG_PORT1_LED 0x0104
-#define SWITCH_REG_PORT2_LED 0x0108
-#define SWITCH_REG_PORT3_LED 0x010C
-#define SWITCH_REG_PORT4_LED 0x0110
-
-/* CODE register bits */
-#define CODE_PC_MASK BITMASK(16) /* Product Code */
-#define CODE_REV_SHIFT 16
-#define CODE_REV_MASK BITMASK(4) /* Product Revision */
-#define CODE_CLKS_SHIFT 20
-#define CODE_CLKS_MASK BITMASK(2) /* Clock Speed */
-#define CODE_CLKS_175 0 /* 175 MHz */
-#define CODE_CLKS_200 1 /* 200 MHz */
-#define CODE_CLKS_225 2 /* 225 MHz */
-#define CODE_CLKS_250 3 /* 250 MHz */
-#define CODE_NAB ONEBIT(24) /* NAND boot */
-#define CODE_PK_MASK BITMASK(1) /* Package type */
-#define CODE_PK_SHIFT 29
-#define CODE_PK_BGA 0 /* BGA package */
-#define CODE_PK_PQFP 1 /* PQFP package */
-
-
-#endif /* _ADM5120_SWITCH_H */
+++ /dev/null
-/*
- * Copyright (C) 2006,2007 Gabor Juhos
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- */
-
-#ifndef _MYLOADER_H_
-#define _MYLOADER_H_
-
-/*
- * Firmware file format:
- *
- * <header>
- * [<block descriptor 0>]
- * ...
- * [<block descriptor n>]
- * <null block descriptor>
- * [<block data 0>]
- * ...
- * [<block data n>]
- *
- *
- */
-
-/* Myloader specific magic numbers */
-#define MYLO_MAGIC_FIRMWARE 0x4C594D00
-#define MYLO_MAGIC_20021103 0x20021103
-#define MYLO_MAGIC_20021107 0x20021107
-
-#define MYLO_MAGIC_SYS_PARAMS MYLO_MAGIC_20021107
-#define MYLO_MAGIC_PARTITIONS MYLO_MAGIC_20021103
-#define MYLO_MAGIC_BOARD_PARAMS MYLO_MAGIC_20021103
-
-/*
- * Addresses of the data structures provided by MyLoader
- */
-#define MYLO_MIPS_SYS_PARAMS 0x80000800 /* System Parameters */
-#define MYLO_MIPS_BOARD_PARAMS 0x80000A00 /* Board Parameters */
-#define MYLO_MIPS_PARTITIONS 0x80000C00 /* Partition Table */
-#define MYLO_MIPS_BOOT_PARAMS 0x80000E00 /* Boot Parameters */
-
-/* Vendor ID's (seems to be same as the PCI vendor ID's) */
-#define VENID_COMPEX 0x11F6
-
-/* Devices based on the ADM5120 */
-#define DEVID_COMPEX_NP27G 0x0078
-#define DEVID_COMPEX_NP28G 0x044C
-#define DEVID_COMPEX_NP28GHS 0x044E
-#define DEVID_COMPEX_WP54Gv1C 0x0514
-#define DEVID_COMPEX_WP54G 0x0515
-#define DEVID_COMPEX_WP54AG 0x0546
-#define DEVID_COMPEX_WPP54AG 0x0550
-#define DEVID_COMPEX_WPP54G 0x0555
-
-/* Devices based on the IXP422 */
-#define DEVID_COMPEX_WP18 0x047E
-#define DEVID_COMPEX_NP18A 0x0489
-
-/* Other devices */
-#define DEVID_COMPEX_NP26G8M 0x03E8
-#define DEVID_COMPEX_NP26G16M 0x03E9
-
-struct mylo_fw_header {
- uint32_t magic; /* must be MYLO_MAGIC_FIRMWARE */
- uint32_t crc; /* CRC of the whole firmware */
- uint32_t res0; /* unknown/unused */
- uint32_t res1; /* unknown/unused */
- uint16_t vid; /* vendor ID */
- uint16_t did; /* device ID */
- uint16_t svid; /* sub vendor ID */
- uint16_t sdid; /* sub device ID */
- uint32_t rev; /* device revision */
- uint32_t fwhi; /* FIXME: firmware version high? */
- uint32_t fwlo; /* FIXME: firmware version low? */
- uint32_t flags; /* firmware flags */
-};
-
-#define FW_FLAG_BOARD_PARAMS_WP 0x01 /* board parameters are write protected */
-#define FW_FLAG_BOOT_SECTOR_WE 0x02 /* enable of write boot sectors (below 64K) */
-
-struct mylo_fw_blockdesc {
- uint32_t type; /* block type */
- uint32_t addr; /* relative address to flash start */
- uint32_t dlen; /* size of block data in bytes */
- uint32_t blen; /* total size of block in bytes */
-};
-
-#define FW_DESC_TYPE_UNUSED 0
-#define FW_DESC_TYPE_USED 1
-
-struct mylo_partition {
- uint16_t flags; /* partition flags */
- uint16_t type; /* type of the partition */
- uint32_t addr; /* relative address of the partition from the
- flash start */
- uint32_t size; /* size of the partition in bytes */
- uint32_t param; /* if this is the active partition, the
- MyLoader load code to this address */
-};
-
-#define PARTITION_FLAG_ACTIVE 0x8000 /* this is the active partition,
- * MyLoader loads firmware from here */
-#define PARTITION_FLAG_ISRAM 0x2000 /* FIXME: this is a RAM partition? */
-#define PARTIIION_FLAG_RAMLOAD 0x1000 /* FIXME: load this partition into the RAM? */
-#define PARTITION_FLAG_PRELOAD 0x0800 /* the partition data preloaded to RAM
- * before decompression */
-#define PARTITION_FLAG_HAVEHDR 0x0002 /* the partition data have a header */
-
-#define PARTITION_TYPE_FREE 0
-#define PARTITION_TYPE_USED 1
-
-#define MYLO_MAX_PARTITIONS 8 /* maximum number of partitions in the
- partition table */
-
-struct mylo_partition_table {
- uint32_t magic; /* must be MYLO_MAGIC_PARTITIONS */
- uint32_t res0; /* unknown/unused */
- uint32_t res1; /* unknown/unused */
- uint32_t res2; /* unknown/unused */
- struct mylo_partition partitions[MYLO_MAX_PARTITIONS];
-};
-
-struct mylo_partition_header {
- uint32_t len; /* length of the partition data */
- uint32_t crc; /* CRC value of the partition data */
-};
-
-struct mylo_system_params {
- uint32_t magic; /* must be MYLO_MAGIC_SYS_PARAMS */
- uint32_t res0;
- uint32_t res1;
- uint32_t mylo_ver;
- uint16_t vid; /* Vendor ID */
- uint16_t did; /* Device ID */
- uint16_t svid; /* Sub Vendor ID */
- uint16_t sdid; /* Sub Device ID */
- uint32_t rev; /* device revision */
- uint32_t fwhi;
- uint32_t fwlo;
- uint32_t tftp_addr;
- uint32_t prog_start;
- uint32_t flash_size; /* Size of boot FLASH in bytes */
- uint32_t dram_size; /* Size of onboard RAM in bytes */
-};
-
-
-struct mylo_eth_addr {
- uint8_t mac[6];
- uint8_t csum[2];
-};
-
-#define MYLO_ETHADDR_COUNT 8 /* maximum number of ethernet address
- in the board parameters */
-
-struct mylo_board_params {
- uint32_t magic; /* must be MYLO_MAGIC_BOARD_PARAMS */
- uint32_t res0;
- uint32_t res1;
- uint32_t res2;
- struct mylo_eth_addr addr[MYLO_ETHADDR_COUNT];
-};
-
-#endif /* _MYLOADER_H_*/
+++ /dev/null
-#
-# Copyright (C) 2006 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-include $(TOPDIR)/rules.mk
-include $(INCLUDE_DIR)/image.mk
-include $(INCLUDE_DIR)/kernel.mk
-
-LOADADDR = 0x81000000 # RAM start + 16M
-KERNEL_ENTRY = 0x80101000
-RAMSIZE = 0x00100000 # 1MB
-IMAGE_COPY = 1
-
-LOADER_MAKEOPTS= \
- KDIR=$(KDIR) \
- LOADADDR=$(LOADADDR) \
- KERNEL_ENTRY=$(KERNEL_ENTRY) \
- RAMSIZE=$(RAMSIZE) \
- IMAGE_COPY=$(IMAGE_COPY)
-
-#define Build/Compile
-# $(CC) -o $(STAGING_DIR)/bin/patch-cmdline $(PLATFORM_DIR)/src/patch-cmdline.c
-#endef
-
-define Build/Clean
- $(MAKE) -C $(GENERIC_PLATFORM_DIR)/image/lzma-loader $(LOADER_MAKEOPTS) clean
-endef
-
-define Image/Prepare
- cat $(KDIR)/vmlinux | $(STAGING_DIR)/bin/lzma e -si -so -eos -lc1 -lp2 -pb2 > $(KDIR)/vmlinux.lzma
- $(MAKE) -C $(GENERIC_PLATFORM_DIR)/image/lzma-loader $(LOADER_MAKEOPTS) clean compile
-endef
-
-define Image/BuildKernel
- $(CP) $(KDIR)/loader.elf $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-vmlinux
-endef
-
-define Image/cmdline/jffs2-64k
-block2mtd.block2mtd=/dev/cfa2,65536 root=/dev/mtdblock0 rootfstype=jffs2 init=/etc/preinit
-endef
-
-define Image/cmdline/jffs2-128k
-block2mtd.block2mtd=/dev/cfa2,131072 root=/dev/mtdblock0 rootfstype=jffs2 init=/etc/preinit
-endef
-
-define Image/cmdline/ext2
-root=/dev/cfa2 rootfstype=ext2 init=/etc/preinit
-endef
-
-define Image/Build
- #$(STAGING_DIR)/bin/patch-cmdline $(KDIR)/vmlinux.elf '$(strip $(call Image/cmdline/$(1))) '
- ./gen_image.sh $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(1).bin 4 $(KDIR)/vmlinux.elf $(CONFIG_TARGET_ROOTFS_FSPART) $(KDIR)/root.$(1)
-endef
-
-$(eval $(call BuildImage))
+++ /dev/null
-#!/usr/bin/env bash
-OUTPUT="$1"
-KERNELSIZE="$2"
-KERNELIMAGE="$3"
-ROOTFSSIZE="$4"
-ROOTFSIMAGE="$5"
-
-rm -f "$OUTPUT"
-
-# create partition table
-set `ptgen -o "$OUTPUT" -h 16 -s 32 -t 0x27 -p ${KERNELSIZE}m -t 0x83 -p ${ROOTFSSIZE}m`
-
-KERNELOFFSET="$(($1 / 512))"
-ROOTFSOFFSET="$(($2 / 512))"
-
-dd if="$KERNELIMAGE" of="$OUTPUT" bs=512 conv=notrunc seek="$KERNELOFFSET"
-dd if="$ROOTFSIMAGE" of="$OUTPUT" bs=512 conv=notrunc seek="$ROOTFSOFFSET"
+++ /dev/null
-#
-# Copyright (C) 2006 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-# $Id: Makefile 4439 2006-08-04 17:14:36Z nbd $
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME := lzma-loader
-PKG_BUILD_DIR := $(BUILD_DIR)/$(PKG_NAME)
-
-$(PKG_BUILD_DIR)/.prepared:
- mkdir $(PKG_BUILD_DIR)
- $(CP) ./src/* $(PKG_BUILD_DIR)/
- touch $@
-
-$(PKG_BUILD_DIR)/loader.gz: $(PKG_BUILD_DIR)/.prepared
- $(MAKE) -C $(PKG_BUILD_DIR) CC="$(TARGET_CC)" \
- LD="$(TARGET_CROSS)ld" CROSS_COMPILE="$(TARGET_CROSS)"
-
-download:
-prepare: $(PKG_BUILD_DIR)/.prepared
-compile: $(PKG_BUILD_DIR)/loader.gz
-install:
-
-ifneq ($(TARGET),)
-install: compile
- $(CP) $(PKG_BUILD_DIR)/loader.gz $(PKG_BUILD_DIR)/loader.elf $(TARGET)/
-endif
-
-clean:
- rm -rf $(PKG_BUILD_DIR)
+++ /dev/null
-/*
- LzmaDecode.c
- LZMA Decoder
-
- LZMA SDK 4.05 Copyright (c) 1999-2004 Igor Pavlov (2004-08-25)
- http://www.7-zip.org/
-
- LZMA SDK is licensed under two licenses:
- 1) GNU Lesser General Public License (GNU LGPL)
- 2) Common Public License (CPL)
- It means that you can select one of these two licenses and
- follow rules of that license.
-
- SPECIAL EXCEPTION:
- Igor Pavlov, as the author of this code, expressly permits you to
- statically or dynamically link your code (or bind by name) to the
- interfaces of this file without subjecting your linked code to the
- terms of the CPL or GNU LGPL. Any modifications or additions
- to this file, however, are subject to the LGPL or CPL terms.
-*/
-
-#include "LzmaDecode.h"
-
-#ifndef Byte
-#define Byte unsigned char
-#endif
-
-#define kNumTopBits 24
-#define kTopValue ((UInt32)1 << kNumTopBits)
-
-#define kNumBitModelTotalBits 11
-#define kBitModelTotal (1 << kNumBitModelTotalBits)
-#define kNumMoveBits 5
-
-typedef struct _CRangeDecoder
-{
- Byte *Buffer;
- Byte *BufferLim;
- UInt32 Range;
- UInt32 Code;
- #ifdef _LZMA_IN_CB
- ILzmaInCallback *InCallback;
- int Result;
- #endif
- int ExtraBytes;
-} CRangeDecoder;
-
-Byte RangeDecoderReadByte(CRangeDecoder *rd)
-{
- if (rd->Buffer == rd->BufferLim)
- {
- #ifdef _LZMA_IN_CB
- UInt32 size;
- rd->Result = rd->InCallback->Read(rd->InCallback, &rd->Buffer, &size);
- rd->BufferLim = rd->Buffer + size;
- if (size == 0)
- #endif
- {
- rd->ExtraBytes = 1;
- return 0xFF;
- }
- }
- return (*rd->Buffer++);
-}
-
-/* #define ReadByte (*rd->Buffer++) */
-#define ReadByte (RangeDecoderReadByte(rd))
-
-void RangeDecoderInit(CRangeDecoder *rd,
- #ifdef _LZMA_IN_CB
- ILzmaInCallback *inCallback
- #else
- Byte *stream, UInt32 bufferSize
- #endif
- )
-{
- int i;
- #ifdef _LZMA_IN_CB
- rd->InCallback = inCallback;
- rd->Buffer = rd->BufferLim = 0;
- #else
- rd->Buffer = stream;
- rd->BufferLim = stream + bufferSize;
- #endif
- rd->ExtraBytes = 0;
- rd->Code = 0;
- rd->Range = (0xFFFFFFFF);
- for(i = 0; i < 5; i++)
- rd->Code = (rd->Code << 8) | ReadByte;
-}
-
-#define RC_INIT_VAR UInt32 range = rd->Range; UInt32 code = rd->Code;
-#define RC_FLUSH_VAR rd->Range = range; rd->Code = code;
-#define RC_NORMALIZE if (range < kTopValue) { range <<= 8; code = (code << 8) | ReadByte; }
-
-UInt32 RangeDecoderDecodeDirectBits(CRangeDecoder *rd, int numTotalBits)
-{
- RC_INIT_VAR
- UInt32 result = 0;
- int i;
- for (i = numTotalBits; i > 0; i--)
- {
- /* UInt32 t; */
- range >>= 1;
-
- result <<= 1;
- if (code >= range)
- {
- code -= range;
- result |= 1;
- }
- /*
- t = (code - range) >> 31;
- t &= 1;
- code -= range & (t - 1);
- result = (result + result) | (1 - t);
- */
- RC_NORMALIZE
- }
- RC_FLUSH_VAR
- return result;
-}
-
-int RangeDecoderBitDecode(CProb *prob, CRangeDecoder *rd)
-{
- UInt32 bound = (rd->Range >> kNumBitModelTotalBits) * *prob;
- if (rd->Code < bound)
- {
- rd->Range = bound;
- *prob += (kBitModelTotal - *prob) >> kNumMoveBits;
- if (rd->Range < kTopValue)
- {
- rd->Code = (rd->Code << 8) | ReadByte;
- rd->Range <<= 8;
- }
- return 0;
- }
- else
- {
- rd->Range -= bound;
- rd->Code -= bound;
- *prob -= (*prob) >> kNumMoveBits;
- if (rd->Range < kTopValue)
- {
- rd->Code = (rd->Code << 8) | ReadByte;
- rd->Range <<= 8;
- }
- return 1;
- }
-}
-
-#define RC_GET_BIT2(prob, mi, A0, A1) \
- UInt32 bound = (range >> kNumBitModelTotalBits) * *prob; \
- if (code < bound) \
- { A0; range = bound; *prob += (kBitModelTotal - *prob) >> kNumMoveBits; mi <<= 1; } \
- else \
- { A1; range -= bound; code -= bound; *prob -= (*prob) >> kNumMoveBits; mi = (mi + mi) + 1; } \
- RC_NORMALIZE
-
-#define RC_GET_BIT(prob, mi) RC_GET_BIT2(prob, mi, ; , ;)
-
-int RangeDecoderBitTreeDecode(CProb *probs, int numLevels, CRangeDecoder *rd)
-{
- int mi = 1;
- int i;
- #ifdef _LZMA_LOC_OPT
- RC_INIT_VAR
- #endif
- for(i = numLevels; i > 0; i--)
- {
- #ifdef _LZMA_LOC_OPT
- CProb *prob = probs + mi;
- RC_GET_BIT(prob, mi)
- #else
- mi = (mi + mi) + RangeDecoderBitDecode(probs + mi, rd);
- #endif
- }
- #ifdef _LZMA_LOC_OPT
- RC_FLUSH_VAR
- #endif
- return mi - (1 << numLevels);
-}
-
-int RangeDecoderReverseBitTreeDecode(CProb *probs, int numLevels, CRangeDecoder *rd)
-{
- int mi = 1;
- int i;
- int symbol = 0;
- #ifdef _LZMA_LOC_OPT
- RC_INIT_VAR
- #endif
- for(i = 0; i < numLevels; i++)
- {
- #ifdef _LZMA_LOC_OPT
- CProb *prob = probs + mi;
- RC_GET_BIT2(prob, mi, ; , symbol |= (1 << i))
- #else
- int bit = RangeDecoderBitDecode(probs + mi, rd);
- mi = mi + mi + bit;
- symbol |= (bit << i);
- #endif
- }
- #ifdef _LZMA_LOC_OPT
- RC_FLUSH_VAR
- #endif
- return symbol;
-}
-
-Byte LzmaLiteralDecode(CProb *probs, CRangeDecoder *rd)
-{
- int symbol = 1;
- #ifdef _LZMA_LOC_OPT
- RC_INIT_VAR
- #endif
- do
- {
- #ifdef _LZMA_LOC_OPT
- CProb *prob = probs + symbol;
- RC_GET_BIT(prob, symbol)
- #else
- symbol = (symbol + symbol) | RangeDecoderBitDecode(probs + symbol, rd);
- #endif
- }
- while (symbol < 0x100);
- #ifdef _LZMA_LOC_OPT
- RC_FLUSH_VAR
- #endif
- return symbol;
-}
-
-Byte LzmaLiteralDecodeMatch(CProb *probs, CRangeDecoder *rd, Byte matchByte)
-{
- int symbol = 1;
- #ifdef _LZMA_LOC_OPT
- RC_INIT_VAR
- #endif
- do
- {
- int bit;
- int matchBit = (matchByte >> 7) & 1;
- matchByte <<= 1;
- #ifdef _LZMA_LOC_OPT
- {
- CProb *prob = probs + ((1 + matchBit) << 8) + symbol;
- RC_GET_BIT2(prob, symbol, bit = 0, bit = 1)
- }
- #else
- bit = RangeDecoderBitDecode(probs + ((1 + matchBit) << 8) + symbol, rd);
- symbol = (symbol << 1) | bit;
- #endif
- if (matchBit != bit)
- {
- while (symbol < 0x100)
- {
- #ifdef _LZMA_LOC_OPT
- CProb *prob = probs + symbol;
- RC_GET_BIT(prob, symbol)
- #else
- symbol = (symbol + symbol) | RangeDecoderBitDecode(probs + symbol, rd);
- #endif
- }
- break;
- }
- }
- while (symbol < 0x100);
- #ifdef _LZMA_LOC_OPT
- RC_FLUSH_VAR
- #endif
- return symbol;
-}
-
-#define kNumPosBitsMax 4
-#define kNumPosStatesMax (1 << kNumPosBitsMax)
-
-#define kLenNumLowBits 3
-#define kLenNumLowSymbols (1 << kLenNumLowBits)
-#define kLenNumMidBits 3
-#define kLenNumMidSymbols (1 << kLenNumMidBits)
-#define kLenNumHighBits 8
-#define kLenNumHighSymbols (1 << kLenNumHighBits)
-
-#define LenChoice 0
-#define LenChoice2 (LenChoice + 1)
-#define LenLow (LenChoice2 + 1)
-#define LenMid (LenLow + (kNumPosStatesMax << kLenNumLowBits))
-#define LenHigh (LenMid + (kNumPosStatesMax << kLenNumMidBits))
-#define kNumLenProbs (LenHigh + kLenNumHighSymbols)
-
-int LzmaLenDecode(CProb *p, CRangeDecoder *rd, int posState)
-{
- if(RangeDecoderBitDecode(p + LenChoice, rd) == 0)
- return RangeDecoderBitTreeDecode(p + LenLow +
- (posState << kLenNumLowBits), kLenNumLowBits, rd);
- if(RangeDecoderBitDecode(p + LenChoice2, rd) == 0)
- return kLenNumLowSymbols + RangeDecoderBitTreeDecode(p + LenMid +
- (posState << kLenNumMidBits), kLenNumMidBits, rd);
- return kLenNumLowSymbols + kLenNumMidSymbols +
- RangeDecoderBitTreeDecode(p + LenHigh, kLenNumHighBits, rd);
-}
-
-#define kNumStates 12
-
-#define kStartPosModelIndex 4
-#define kEndPosModelIndex 14
-#define kNumFullDistances (1 << (kEndPosModelIndex >> 1))
-
-#define kNumPosSlotBits 6
-#define kNumLenToPosStates 4
-
-#define kNumAlignBits 4
-#define kAlignTableSize (1 << kNumAlignBits)
-
-#define kMatchMinLen 2
-
-#define IsMatch 0
-#define IsRep (IsMatch + (kNumStates << kNumPosBitsMax))
-#define IsRepG0 (IsRep + kNumStates)
-#define IsRepG1 (IsRepG0 + kNumStates)
-#define IsRepG2 (IsRepG1 + kNumStates)
-#define IsRep0Long (IsRepG2 + kNumStates)
-#define PosSlot (IsRep0Long + (kNumStates << kNumPosBitsMax))
-#define SpecPos (PosSlot + (kNumLenToPosStates << kNumPosSlotBits))
-#define Align (SpecPos + kNumFullDistances - kEndPosModelIndex)
-#define LenCoder (Align + kAlignTableSize)
-#define RepLenCoder (LenCoder + kNumLenProbs)
-#define Literal (RepLenCoder + kNumLenProbs)
-
-#if Literal != LZMA_BASE_SIZE
-StopCompilingDueBUG
-#endif
-
-#ifdef _LZMA_OUT_READ
-
-typedef struct _LzmaVarState
-{
- CRangeDecoder RangeDecoder;
- Byte *Dictionary;
- UInt32 DictionarySize;
- UInt32 DictionaryPos;
- UInt32 GlobalPos;
- UInt32 Reps[4];
- int lc;
- int lp;
- int pb;
- int State;
- int PreviousIsMatch;
- int RemainLen;
-} LzmaVarState;
-
-int LzmaDecoderInit(
- unsigned char *buffer, UInt32 bufferSize,
- int lc, int lp, int pb,
- unsigned char *dictionary, UInt32 dictionarySize,
- #ifdef _LZMA_IN_CB
- ILzmaInCallback *inCallback
- #else
- unsigned char *inStream, UInt32 inSize
- #endif
- )
-{
- LzmaVarState *vs = (LzmaVarState *)buffer;
- CProb *p = (CProb *)(buffer + sizeof(LzmaVarState));
- UInt32 numProbs = Literal + ((UInt32)LZMA_LIT_SIZE << (lc + lp));
- UInt32 i;
- if (bufferSize < numProbs * sizeof(CProb) + sizeof(LzmaVarState))
- return LZMA_RESULT_NOT_ENOUGH_MEM;
- vs->Dictionary = dictionary;
- vs->DictionarySize = dictionarySize;
- vs->DictionaryPos = 0;
- vs->GlobalPos = 0;
- vs->Reps[0] = vs->Reps[1] = vs->Reps[2] = vs->Reps[3] = 1;
- vs->lc = lc;
- vs->lp = lp;
- vs->pb = pb;
- vs->State = 0;
- vs->PreviousIsMatch = 0;
- vs->RemainLen = 0;
- dictionary[dictionarySize - 1] = 0;
- for (i = 0; i < numProbs; i++)
- p[i] = kBitModelTotal >> 1;
- RangeDecoderInit(&vs->RangeDecoder,
- #ifdef _LZMA_IN_CB
- inCallback
- #else
- inStream, inSize
- #endif
- );
- return LZMA_RESULT_OK;
-}
-
-int LzmaDecode(unsigned char *buffer,
- unsigned char *outStream, UInt32 outSize,
- UInt32 *outSizeProcessed)
-{
- LzmaVarState *vs = (LzmaVarState *)buffer;
- CProb *p = (CProb *)(buffer + sizeof(LzmaVarState));
- CRangeDecoder rd = vs->RangeDecoder;
- int state = vs->State;
- int previousIsMatch = vs->PreviousIsMatch;
- Byte previousByte;
- UInt32 rep0 = vs->Reps[0], rep1 = vs->Reps[1], rep2 = vs->Reps[2], rep3 = vs->Reps[3];
- UInt32 nowPos = 0;
- UInt32 posStateMask = (1 << (vs->pb)) - 1;
- UInt32 literalPosMask = (1 << (vs->lp)) - 1;
- int lc = vs->lc;
- int len = vs->RemainLen;
- UInt32 globalPos = vs->GlobalPos;
-
- Byte *dictionary = vs->Dictionary;
- UInt32 dictionarySize = vs->DictionarySize;
- UInt32 dictionaryPos = vs->DictionaryPos;
-
- if (len == -1)
- {
- *outSizeProcessed = 0;
- return LZMA_RESULT_OK;
- }
-
- while(len > 0 && nowPos < outSize)
- {
- UInt32 pos = dictionaryPos - rep0;
- if (pos >= dictionarySize)
- pos += dictionarySize;
- outStream[nowPos++] = dictionary[dictionaryPos] = dictionary[pos];
- if (++dictionaryPos == dictionarySize)
- dictionaryPos = 0;
- len--;
- }
- if (dictionaryPos == 0)
- previousByte = dictionary[dictionarySize - 1];
- else
- previousByte = dictionary[dictionaryPos - 1];
-#else
-
-int LzmaDecode(
- Byte *buffer, UInt32 bufferSize,
- int lc, int lp, int pb,
- #ifdef _LZMA_IN_CB
- ILzmaInCallback *inCallback,
- #else
- unsigned char *inStream, UInt32 inSize,
- #endif
- unsigned char *outStream, UInt32 outSize,
- UInt32 *outSizeProcessed)
-{
- UInt32 numProbs = Literal + ((UInt32)LZMA_LIT_SIZE << (lc + lp));
- CProb *p = (CProb *)buffer;
- CRangeDecoder rd;
- UInt32 i;
- int state = 0;
- int previousIsMatch = 0;
- Byte previousByte = 0;
- UInt32 rep0 = 1, rep1 = 1, rep2 = 1, rep3 = 1;
- UInt32 nowPos = 0;
- UInt32 posStateMask = (1 << pb) - 1;
- UInt32 literalPosMask = (1 << lp) - 1;
- int len = 0;
- if (bufferSize < numProbs * sizeof(CProb))
- return LZMA_RESULT_NOT_ENOUGH_MEM;
- for (i = 0; i < numProbs; i++)
- p[i] = kBitModelTotal >> 1;
- RangeDecoderInit(&rd,
- #ifdef _LZMA_IN_CB
- inCallback
- #else
- inStream, inSize
- #endif
- );
-#endif
-
- *outSizeProcessed = 0;
- while(nowPos < outSize)
- {
- int posState = (int)(
- (nowPos
- #ifdef _LZMA_OUT_READ
- + globalPos
- #endif
- )
- & posStateMask);
- #ifdef _LZMA_IN_CB
- if (rd.Result != LZMA_RESULT_OK)
- return rd.Result;
- #endif
- if (rd.ExtraBytes != 0)
- return LZMA_RESULT_DATA_ERROR;
- if (RangeDecoderBitDecode(p + IsMatch + (state << kNumPosBitsMax) + posState, &rd) == 0)
- {
- CProb *probs = p + Literal + (LZMA_LIT_SIZE *
- (((
- (nowPos
- #ifdef _LZMA_OUT_READ
- + globalPos
- #endif
- )
- & literalPosMask) << lc) + (previousByte >> (8 - lc))));
-
- if (state < 4) state = 0;
- else if (state < 10) state -= 3;
- else state -= 6;
- if (previousIsMatch)
- {
- Byte matchByte;
- #ifdef _LZMA_OUT_READ
- UInt32 pos = dictionaryPos - rep0;
- if (pos >= dictionarySize)
- pos += dictionarySize;
- matchByte = dictionary[pos];
- #else
- matchByte = outStream[nowPos - rep0];
- #endif
- previousByte = LzmaLiteralDecodeMatch(probs, &rd, matchByte);
- previousIsMatch = 0;
- }
- else
- previousByte = LzmaLiteralDecode(probs, &rd);
- outStream[nowPos++] = previousByte;
- #ifdef _LZMA_OUT_READ
- dictionary[dictionaryPos] = previousByte;
- if (++dictionaryPos == dictionarySize)
- dictionaryPos = 0;
- #endif
- }
- else
- {
- previousIsMatch = 1;
- if (RangeDecoderBitDecode(p + IsRep + state, &rd) == 1)
- {
- if (RangeDecoderBitDecode(p + IsRepG0 + state, &rd) == 0)
- {
- if (RangeDecoderBitDecode(p + IsRep0Long + (state << kNumPosBitsMax) + posState, &rd) == 0)
- {
- #ifdef _LZMA_OUT_READ
- UInt32 pos;
- #endif
- if (
- (nowPos
- #ifdef _LZMA_OUT_READ
- + globalPos
- #endif
- )
- == 0)
- return LZMA_RESULT_DATA_ERROR;
- state = state < 7 ? 9 : 11;
- #ifdef _LZMA_OUT_READ
- pos = dictionaryPos - rep0;
- if (pos >= dictionarySize)
- pos += dictionarySize;
- previousByte = dictionary[pos];
- dictionary[dictionaryPos] = previousByte;
- if (++dictionaryPos == dictionarySize)
- dictionaryPos = 0;
- #else
- previousByte = outStream[nowPos - rep0];
- #endif
- outStream[nowPos++] = previousByte;
- continue;
- }
- }
- else
- {
- UInt32 distance;
- if(RangeDecoderBitDecode(p + IsRepG1 + state, &rd) == 0)
- distance = rep1;
- else
- {
- if(RangeDecoderBitDecode(p + IsRepG2 + state, &rd) == 0)
- distance = rep2;
- else
- {
- distance = rep3;
- rep3 = rep2;
- }
- rep2 = rep1;
- }
- rep1 = rep0;
- rep0 = distance;
- }
- len = LzmaLenDecode(p + RepLenCoder, &rd, posState);
- state = state < 7 ? 8 : 11;
- }
- else
- {
- int posSlot;
- rep3 = rep2;
- rep2 = rep1;
- rep1 = rep0;
- state = state < 7 ? 7 : 10;
- len = LzmaLenDecode(p + LenCoder, &rd, posState);
- posSlot = RangeDecoderBitTreeDecode(p + PosSlot +
- ((len < kNumLenToPosStates ? len : kNumLenToPosStates - 1) <<
- kNumPosSlotBits), kNumPosSlotBits, &rd);
- if (posSlot >= kStartPosModelIndex)
- {
- int numDirectBits = ((posSlot >> 1) - 1);
- rep0 = ((2 | ((UInt32)posSlot & 1)) << numDirectBits);
- if (posSlot < kEndPosModelIndex)
- {
- rep0 += RangeDecoderReverseBitTreeDecode(
- p + SpecPos + rep0 - posSlot - 1, numDirectBits, &rd);
- }
- else
- {
- rep0 += RangeDecoderDecodeDirectBits(&rd,
- numDirectBits - kNumAlignBits) << kNumAlignBits;
- rep0 += RangeDecoderReverseBitTreeDecode(p + Align, kNumAlignBits, &rd);
- }
- }
- else
- rep0 = posSlot;
- rep0++;
- }
- if (rep0 == (UInt32)(0))
- {
- /* it's for stream version */
- len = -1;
- break;
- }
- if (rep0 > nowPos
- #ifdef _LZMA_OUT_READ
- + globalPos
- #endif
- )
- {
- return LZMA_RESULT_DATA_ERROR;
- }
- len += kMatchMinLen;
- do
- {
- #ifdef _LZMA_OUT_READ
- UInt32 pos = dictionaryPos - rep0;
- if (pos >= dictionarySize)
- pos += dictionarySize;
- previousByte = dictionary[pos];
- dictionary[dictionaryPos] = previousByte;
- if (++dictionaryPos == dictionarySize)
- dictionaryPos = 0;
- #else
- previousByte = outStream[nowPos - rep0];
- #endif
- outStream[nowPos++] = previousByte;
- len--;
- }
- while(len > 0 && nowPos < outSize);
- }
- }
-
- #ifdef _LZMA_OUT_READ
- vs->RangeDecoder = rd;
- vs->DictionaryPos = dictionaryPos;
- vs->GlobalPos = globalPos + nowPos;
- vs->Reps[0] = rep0;
- vs->Reps[1] = rep1;
- vs->Reps[2] = rep2;
- vs->Reps[3] = rep3;
- vs->State = state;
- vs->PreviousIsMatch = previousIsMatch;
- vs->RemainLen = len;
- #endif
-
- *outSizeProcessed = nowPos;
- return LZMA_RESULT_OK;
-}
+++ /dev/null
-/*
- LzmaDecode.h
- LZMA Decoder interface
-
- LZMA SDK 4.05 Copyright (c) 1999-2004 Igor Pavlov (2004-08-25)
- http://www.7-zip.org/
-
- LZMA SDK is licensed under two licenses:
- 1) GNU Lesser General Public License (GNU LGPL)
- 2) Common Public License (CPL)
- It means that you can select one of these two licenses and
- follow rules of that license.
-
- SPECIAL EXCEPTION:
- Igor Pavlov, as the author of this code, expressly permits you to
- statically or dynamically link your code (or bind by name) to the
- interfaces of this file without subjecting your linked code to the
- terms of the CPL or GNU LGPL. Any modifications or additions
- to this file, however, are subject to the LGPL or CPL terms.
-*/
-
-#ifndef __LZMADECODE_H
-#define __LZMADECODE_H
-
-/* #define _LZMA_IN_CB */
-/* Use callback for input data */
-
-/* #define _LZMA_OUT_READ */
-/* Use read function for output data */
-
-/* #define _LZMA_PROB32 */
-/* It can increase speed on some 32-bit CPUs,
- but memory usage will be doubled in that case */
-
-/* #define _LZMA_LOC_OPT */
-/* Enable local speed optimizations inside code */
-
-#ifndef UInt32
-#ifdef _LZMA_UINT32_IS_ULONG
-#define UInt32 unsigned long
-#else
-#define UInt32 unsigned int
-#endif
-#endif
-
-#ifdef _LZMA_PROB32
-#define CProb UInt32
-#else
-#define CProb unsigned short
-#endif
-
-#define LZMA_RESULT_OK 0
-#define LZMA_RESULT_DATA_ERROR 1
-#define LZMA_RESULT_NOT_ENOUGH_MEM 2
-
-#ifdef _LZMA_IN_CB
-typedef struct _ILzmaInCallback
-{
- int (*Read)(void *object, unsigned char **buffer, UInt32 *bufferSize);
-} ILzmaInCallback;
-#endif
-
-#define LZMA_BASE_SIZE 1846
-#define LZMA_LIT_SIZE 768
-
-/*
-bufferSize = (LZMA_BASE_SIZE + (LZMA_LIT_SIZE << (lc + lp)))* sizeof(CProb)
-bufferSize += 100 in case of _LZMA_OUT_READ
-by default CProb is unsigned short,
-but if specify _LZMA_PROB_32, CProb will be UInt32(unsigned int)
-*/
-
-#ifdef _LZMA_OUT_READ
-int LzmaDecoderInit(
- unsigned char *buffer, UInt32 bufferSize,
- int lc, int lp, int pb,
- unsigned char *dictionary, UInt32 dictionarySize,
- #ifdef _LZMA_IN_CB
- ILzmaInCallback *inCallback
- #else
- unsigned char *inStream, UInt32 inSize
- #endif
-);
-#endif
-
-int LzmaDecode(
- unsigned char *buffer,
- #ifndef _LZMA_OUT_READ
- UInt32 bufferSize,
- int lc, int lp, int pb,
- #ifdef _LZMA_IN_CB
- ILzmaInCallback *inCallback,
- #else
- unsigned char *inStream, UInt32 inSize,
- #endif
- #endif
- unsigned char *outStream, UInt32 outSize,
- UInt32 *outSizeProcessed);
-
-#endif
+++ /dev/null
-#
-# Makefile for Broadcom BCM947XX boards
-#
-# Copyright 2001-2003, Broadcom Corporation
-# All Rights Reserved.
-#
-# THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
-# KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
-# SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
-# FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
-#
-# Copyright 2004 Manuel Novoa III <mjn3@codepoet.org>
-# Modified to support bzip'd kernels.
-# Of course, it would be better to integrate bunzip capability into CFE.
-#
-# Copyright 2005 Oleg I. Vdovikin <oleg@cs.msu.su>
-# Cleaned up, modified for lzma support, removed from kernel
-#
-
-TEXT_START := 0x80001000
-BZ_TEXT_START := 0x80300000
-
-OBJCOPY := $(CROSS_COMPILE)objcopy -O binary -R .reginfo -R .note -R .comment -R .mdebug -S
-
-CFLAGS = -D__KERNEL__ -Wall -Wstrict-prototypes -Wno-trigraphs -Os \
- -fno-strict-aliasing -fno-common -fomit-frame-pointer -G 0 -mno-abicalls -fno-pic \
- -ffunction-sections -pipe -mlong-calls -fno-common \
- -mabi=32 -march=mips32 -Wa,-32 -Wa,-march=mips32 -Wa,-mips32 -Wa,--trap
-CFLAGS += -DLOADADDR=$(TEXT_START) -D_LZMA_IN_CB
-
-ASFLAGS = $(CFLAGS) -D__ASSEMBLY__ -DBZ_TEXT_START=$(BZ_TEXT_START)
-
-SEDFLAGS := s/BZ_TEXT_START/$(BZ_TEXT_START)/;s/TEXT_START/$(TEXT_START)/
-
-OBJECTS := head.o data.o
-
-all: loader.gz loader.elf
-
-# Don't build dependencies, this may die if $(CC) isn't gcc
-dep:
-
-install:
-
-loader.gz: loader
- gzip -nc9 $< > $@
-
-loader.elf: loader.o
- cp $< $@
-
-loader: loader.o
- $(OBJCOPY) $< $@
-
-loader.o: loader.lds $(OBJECTS)
- $(LD) -static --gc-sections -no-warn-mismatch -T loader.lds -o $@ $(OBJECTS)
-
-loader.lds: loader.lds.in Makefile
- @sed "$(SEDFLAGS)" < $< > $@
-
-data.o: data.lds decompress.image
- $(LD) -no-warn-mismatch -T data.lds -r -o $@ -b binary decompress.image -b elf32-tradlittlemips
-
-data.lds:
- @echo "SECTIONS { .data : { code_start = .; *(.data) code_stop = .; }}" > $@
-
-decompress.image: decompress
- $(OBJCOPY) $< $@
-
-decompress: decompress.lds decompress.o LzmaDecode.o
- $(LD) -static --gc-sections -no-warn-mismatch -T decompress.lds -o $@ decompress.o LzmaDecode.o
-
-decompress.lds: decompress.lds.in Makefile
- @sed "$(SEDFLAGS)" < $< > $@
-
-mrproper: clean
-
-clean:
- rm -f loader.gz loader decompress *.lds *.o *.image
+++ /dev/null
-/*
- * LZMA compressed kernel decompressor for bcm947xx boards
- *
- * Copyright (C) 2005 by Oleg I. Vdovikin <oleg@cs.msu.su>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- */
-
-The code is intended to decompress kernel, being compressed using lzma utility
-build using 7zip LZMA SDK. This utility is located in the LZMA_Alone directory
-
-decompressor code expects that your .trx file consist of three partitions:
-
-1) decompressor itself (this is gziped code which pmon/cfe will extract and run
-on boot-up instead of real kernel)
-2) LZMA compressed kernel (both streamed and regular modes are supported now)
-3) Root filesystem
-
-Please be sure to apply the following patch for use this new trx layout (it will
-allow using both new and old trx files for root filesystem lookup code)
-
---- linuz/arch/mips/brcm-boards/bcm947xx/setup.c 2005-01-23 19:24:27.503322896 +0300
-+++ linux/arch/mips/brcm-boards/bcm947xx/setup.c 2005-01-23 19:29:05.237100944 +0300
-@@ -221,7 +221,9 @@
- /* Try looking at TRX header for rootfs offset */
- if (le32_to_cpu(trx->magic) == TRX_MAGIC) {
- bcm947xx_parts[1].offset = off;
-- if (le32_to_cpu(trx->offsets[1]) > off)
-+ if (le32_to_cpu(trx->offsets[2]) > off)
-+ off = le32_to_cpu(trx->offsets[2]);
-+ else if (le32_to_cpu(trx->offsets[1]) > off)
- off = le32_to_cpu(trx->offsets[1]);
- continue;
- }
-
-
-Revision history:
- 0.02 Initial release
- 0.03 Added Mineharu Takahara <mtakahar@yahoo.com> patch to pass actual
- output size to decoder (stream mode compressed input is not
- a requirement anymore)
- 0.04 Reordered functions using lds script
+++ /dev/null
-/*
- * LZMA compressed kernel decompressor for bcm947xx boards
- *
- * Copyright (C) 2005 by Oleg I. Vdovikin <oleg@cs.msu.su>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- *
- * Please note, this was code based on the bunzip2 decompressor code
- * by Manuel Novoa III (mjn3@codepoet.org), although the only thing left
- * is an idea and part of original vendor code
- *
- *
- * 12-Mar-2005 Mineharu Takahara <mtakahar@yahoo.com>
- * pass actual output size to decoder (stream mode
- * compressed input is not a requirement anymore)
- *
- * 24-Apr-2005 Oleg I. Vdovikin
- * reordered functions using lds script, removed forward decl
- *
- * 24-Mar-2007 Gabor Juhos
- * pass original values of the a0,a1,a2,a3 registers to the kernel
- *
- */
-
-#include "LzmaDecode.h"
-
-#define BCM4710_FLASH 0x1fc00000 /* Flash */
-
-#define KSEG0 0x80000000
-#define KSEG1 0xa0000000
-
-#define KSEG1ADDR(a) ((((unsigned)(a)) & 0x1fffffffU) | KSEG1)
-
-#define Index_Invalidate_I 0x00
-#define Index_Writeback_Inv_D 0x01
-
-#define cache_unroll(base,op) \
- __asm__ __volatile__( \
- ".set noreorder;\n" \
- ".set mips3;\n" \
- "cache %1, (%0);\n" \
- ".set mips0;\n" \
- ".set reorder\n" \
- : \
- : "r" (base), \
- "i" (op));
-
-static __inline__ void blast_icache(unsigned long size, unsigned long lsize)
-{
- unsigned long start = KSEG0;
- unsigned long end = (start + size);
-
- while(start < end) {
- cache_unroll(start,Index_Invalidate_I);
- start += lsize;
- }
-}
-
-static __inline__ void blast_dcache(unsigned long size, unsigned long lsize)
-{
- unsigned long start = KSEG0;
- unsigned long end = (start + size);
-
- while(start < end) {
- cache_unroll(start,Index_Writeback_Inv_D);
- start += lsize;
- }
-}
-
-#define TRX_MAGIC 0x30524448 /* "HDR0" */
-
-struct trx_header {
- unsigned int magic; /* "HDR0" */
- unsigned int len; /* Length of file including header */
- unsigned int crc32; /* 32-bit CRC from flag_version to end of file */
- unsigned int flag_version; /* 0:15 flags, 16:31 version */
- unsigned int offsets[3]; /* Offsets of partitions from start of header */
-};
-
-/* beyound the image end, size not known in advance */
-extern unsigned char workspace[];
-
-unsigned int offset;
-unsigned char *data;
-
-typedef void (*kernel_entry)(unsigned long reg_a0, unsigned long reg_a1,
- unsigned long reg_a2, unsigned long reg_a3);
-
-/* flash access should be aligned, so wrapper is used */
-/* read byte from the flash, all accesses are 32-bit aligned */
-static int read_byte(void *object, unsigned char **buffer, UInt32 *bufferSize)
-{
- static unsigned int val;
-
- if (((unsigned int)offset % 4) == 0) {
- val = *(unsigned int *)data;
- data += 4;
- }
-
- *bufferSize = 1;
- *buffer = ((unsigned char *)&val) + (offset++ & 3);
-
- return LZMA_RESULT_OK;
-}
-
-static __inline__ unsigned char get_byte(void)
-{
- unsigned char *buffer;
- UInt32 fake;
-
- return read_byte(0, &buffer, &fake), *buffer;
-}
-
-/* should be the first function */
-void entry(unsigned long reg_a0, unsigned long reg_a1,
- unsigned long reg_a2, unsigned long reg_a3,
- unsigned long icache_size, unsigned long icache_lsize,
- unsigned long dcache_size, unsigned long dcache_lsize)
-{
- unsigned int i; /* temp value */
- unsigned int lc; /* literal context bits */
- unsigned int lp; /* literal pos state bits */
- unsigned int pb; /* pos state bits */
- unsigned int osize; /* uncompressed size */
-
- ILzmaInCallback callback;
- callback.Read = read_byte;
-
- uart_write_str("decompress kernel ... ");
-
- /* look for trx header, 32-bit data access */
- for (data = ((unsigned char *) KSEG1ADDR(BCM4710_FLASH));
- ((struct trx_header *)data)->magic != TRX_MAGIC; data += 65536);
-
- /* compressed kernel is in the partition 0 or 1 */
- if (((struct trx_header *)data)->offsets[1] > 65536)
- data += ((struct trx_header *)data)->offsets[0];
- else
- data += ((struct trx_header *)data)->offsets[1];
-
- offset = 0;
-
- /* lzma args */
- i = get_byte();
- lc = i % 9, i = i / 9;
- lp = i % 5, pb = i / 5;
-
- /* skip rest of the LZMA coder property */
- for (i = 0; i < 4; i++)
- get_byte();
-
- /* read the lower half of uncompressed size in the header */
- osize = ((unsigned int)get_byte()) +
- ((unsigned int)get_byte() << 8) +
- ((unsigned int)get_byte() << 16) +
- ((unsigned int)get_byte() << 24);
-
- /* skip rest of the header (upper half of uncompressed size) */
- for (i = 0; i < 4; i++)
- get_byte();
-
- /* decompress kernel */
- if (LzmaDecode(workspace, ~0, lc, lp, pb, &callback,
- (unsigned char*)LOADADDR, osize, &i) == LZMA_RESULT_OK)
- {
- blast_dcache(dcache_size, dcache_lsize);
- blast_icache(icache_size, icache_lsize);
-
- /* Jump to load address */
- uart_write_str("ok\r\n");
- ((kernel_entry) LOADADDR)(reg_a0, reg_a1, reg_a2, reg_a3);
- }
- uart_write_str("failed\r\n");
- while (1 );
-}
-
-/* *********************************************************************
- *
- * ADM5120 UART driver File: dev_adm_uart.c
- *
- * This is a console device driver for an ADM5120 UART
- *
- *********************************************************************
- *
- * Copyright 2006
- * Compex Systems. All rights reserved.
- *
- ********************************************************************* */
-
-#define READCSR(r) *(volatile UInt32 *)(0xB2600000+(r))
-#define WRITECSR(r,v) *(volatile UInt32 *)(0xB2600000+(r)) = v
-
-#define UART_DR_REG 0x00
-#define UART_FR_REG 0x18
-#define UART_TX_FIFO_FULL 0x20
-
-int uart_write(int val)
-{
- WRITECSR(UART_DR_REG, val);
- while ( (READCSR(UART_FR_REG) & UART_TX_FIFO_FULL) );
- return 0;
-}
-
-int uart_write_str(char * str)
-{
- while ( *str != 0 ) {
- uart_write ( *str++ );
- }
- return 0;
-}
-
-int uart_write_hex(int val)
-{
- int i;
- int tmp;
-
- uart_write_str("0x");
- for ( i=0 ; i<8 ; i++ ) {
- tmp = (val >> ((7-i) * 4 )) & 0xf;
- tmp = tmp < 10 ? (tmp + '0') : (tmp + 'A' - 10);
- uart_write(tmp);
- }
- uart_write_str("\r\n");
- return 0;
-}
-
+++ /dev/null
-OUTPUT_ARCH(mips)
-ENTRY(entry)
-SECTIONS {
- . = BZ_TEXT_START;
- .text : {
- *(.text.entry)
- *(.text)
- *(.rodata)
- }
-
- .data : {
- *(.data)
- }
-
- .bss : {
- *(.bss)
- }
-
- workspace = .;
-}
+++ /dev/null
-/* Copyright 2007 Gabor Juhos */
-/* keep original values of the a0,a1,a2,a3 registers */
-/* cache manipulation adapted from Broadcom code */
-/* Copyright 2005 Oleg I. Vdovikin (oleg@cs.msu.su) */
-/* cache manipulation adapted from Broadcom code */
-/* idea taken from original bunzip2 decompressor code */
-/* Copyright 2004 Manuel Novoa III (mjn3@codepoet.org) */
-/* Licensed under the linux kernel's version of the GPL.*/
-
-#include <asm/asm.h>
-#include <asm/regdef.h>
-
-#define KSEG0 0x80000000
-
-#define C0_CONFIG $16
-#define C0_TAGLO $28
-#define C0_TAGHI $29
-
-#define CONF1_DA_SHIFT 7 /* D$ associativity */
-#define CONF1_DA_MASK 0x00000380
-#define CONF1_DA_BASE 1
-#define CONF1_DL_SHIFT 10 /* D$ line size */
-#define CONF1_DL_MASK 0x00001c00
-#define CONF1_DL_BASE 2
-#define CONF1_DS_SHIFT 13 /* D$ sets/way */
-#define CONF1_DS_MASK 0x0000e000
-#define CONF1_DS_BASE 64
-#define CONF1_IA_SHIFT 16 /* I$ associativity */
-#define CONF1_IA_MASK 0x00070000
-#define CONF1_IA_BASE 1
-#define CONF1_IL_SHIFT 19 /* I$ line size */
-#define CONF1_IL_MASK 0x00380000
-#define CONF1_IL_BASE 2
-#define CONF1_IS_SHIFT 22 /* Instruction cache sets/way */
-#define CONF1_IS_MASK 0x01c00000
-#define CONF1_IS_BASE 64
-
-#define Index_Invalidate_I 0x00
-#define Index_Writeback_Inv_D 0x01
-
- .text
- LEAF(startup)
- .set noreorder
-
- /* Copy decompressor code to the right place */
- li t0, BZ_TEXT_START
-
- la t1, code_start
- la t2, code_stop
-$L1:
- lw t3, 0(t1)
- sw t3, 0(t0)
- add t1, 4
- blt t1, t2, $L1
- add t0, 4
-
- /* At this point we need to invalidate dcache and */
- /* icache before jumping to new code */
-
-1: /* Get cache sizes */
- .set mips32
- mfc0 s0,C0_CONFIG,1
- .set mips0
-
- li s1,CONF1_DL_MASK
- and s1,s0
- beq s1,zero,nodc
- nop
-
- srl s1,CONF1_DL_SHIFT
- li t0,CONF1_DL_BASE
- sll s1,t0,s1 /* s1 has D$ cache line size */
-
- li s2,CONF1_DA_MASK
- and s2,s0
- srl s2,CONF1_DA_SHIFT
- addiu s2,CONF1_DA_BASE /* s2 now has D$ associativity */
-
- li t0,CONF1_DS_MASK
- and t0,s0
- srl t0,CONF1_DS_SHIFT
- li s3,CONF1_DS_BASE
- sll s3,s3,t0 /* s3 has D$ sets per way */
-
- multu s2,s3 /* sets/way * associativity */
- mflo t0 /* total cache lines */
-
- multu s1,t0 /* D$ linesize * lines */
- mflo s2 /* s2 is now D$ size in bytes */
-
- /* Initilize the D$: */
- mtc0 zero,C0_TAGLO
- mtc0 zero,C0_TAGHI
-
- li t0,KSEG0 /* Just an address for the first $ line */
- addu t1,t0,s2 /* + size of cache == end */
-
- .set mips3
-1: cache Index_Writeback_Inv_D,0(t0)
- .set mips0
- bne t0,t1,1b
- addu t0,s1
-
-nodc:
- /* Now we get to do it all again for the I$ */
-
- move s3,zero /* just in case there is no icache */
- move s4,zero
-
- li t0,CONF1_IL_MASK
- and t0,s0
- beq t0,zero,noic
- nop
-
- srl t0,CONF1_IL_SHIFT
- li s3,CONF1_IL_BASE
- sll s3,t0 /* s3 has I$ cache line size */
-
- li t0,CONF1_IA_MASK
- and t0,s0
- srl t0,CONF1_IA_SHIFT
- addiu s4,t0,CONF1_IA_BASE /* s4 now has I$ associativity */
-
- li t0,CONF1_IS_MASK
- and t0,s0
- srl t0,CONF1_IS_SHIFT
- li s5,CONF1_IS_BASE
- sll s5,t0 /* s5 has I$ sets per way */
-
- multu s4,s5 /* sets/way * associativity */
- mflo t0 /* s4 is now total cache lines */
-
- multu s3,t0 /* I$ linesize * lines */
- mflo s4 /* s4 is cache size in bytes */
-
- /* Initilize the I$: */
- mtc0 zero,C0_TAGLO
- mtc0 zero,C0_TAGHI
-
- li t0,KSEG0 /* Just an address for the first $ line */
- addu t1,t0,s4 /* + size of cache == end */
-
- .set mips3
-1: cache Index_Invalidate_I,0(t0)
- .set mips0
- bne t0,t1,1b
- addu t0,s3
-
-noic:
- li t0, BZ_TEXT_START
-
- addiu sp, -32 /* reserve stack for parameters */
-#if 0
- sw a0, 0(sp)
- sw a1, 4(sp)
- sw a2, 8(sp)
- sw a3, 12(sp)
-#endif
- sw s3, 16(sp) /* icache line size */
- sw s4, 20(sp) /* icache size */
- sw s1, 24(sp) /* dcache line size */
- jr t0
- sw s2, 28(sp) /* dcache size */
-
- .set reorder
- END(startup)
+++ /dev/null
-OUTPUT_ARCH(mips)
-ENTRY(startup)
-SECTIONS {
- . = TEXT_START;
- .text : {
- *(.text)
- *(.rodata)
- }
-
- .data : {
- *(.data)
- }
-
- .bss : {
- *(.bss)
- }
-}
+++ /dev/null
-diff -urN linux-2.6.19.2/arch/mips/Kconfig linux-2.6.19.2.new/arch/mips/Kconfig
---- linux-2.6.19.2/arch/mips/Kconfig 2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2.new/arch/mips/Kconfig 2007-01-23 14:49:38.000000000 +0100
-@@ -12,6 +12,18 @@
- prompt "System type"
- default SGI_IP22
-
-+config MIPS_ADM5120
-+ bool "Support for ADM5120 SoC"
-+ select SYS_HAS_CPU_MIPS32_R1
-+ select DMA_NONCOHERENT
-+ select HW_HAS_PCI
-+ select SYS_SUPPORTS_LITTLE_ENDIAN
-+ select SYS_SUPPORTS_32BIT_KERNEL
-+
-+config PCI_ADM5120
-+ bool "Add PCI control support for ADM5120"
-+ depends on MIPS_ADM5120 && PCI
-+
- config MIPS_MTX1
- bool "4G Systems MTX-1 board"
- select DMA_NONCOHERENT
-diff -urN linux-2.6.19.2/arch/mips/Makefile linux-2.6.19.2.new/arch/mips/Makefile
---- linux-2.6.19.2/arch/mips/Makefile 2007-01-23 14:02:57.000000000 +0100
-+++ linux-2.6.19.2.new/arch/mips/Makefile 2007-01-23 14:49:39.000000000 +0100
-@@ -165,6 +165,14 @@
- load-$(CONFIG_MACH_JAZZ) += 0xffffffff80080000
-
- #
-+# ADMtek 5120
-+#
-+
-+core-$(CONFIG_MIPS_ADM5120) += arch/mips/adm5120/
-+cflags-$(CONFIG_MIPS_ADM5120) += -Iinclude/asm-mips/mach-adm5120
-+load-$(CONFIG_MIPS_ADM5120) += 0xffffffff80101000
-+
-+#
- # Common Alchemy Au1x00 stuff
- #
- core-$(CONFIG_SOC_AU1X00) += arch/mips/au1000/common/
-diff -urN linux-2.6.19.2/arch/mips/pci/Makefile linux-2.6.19.2.new/arch/mips/pci/Makefile
---- linux-2.6.19.2/arch/mips/pci/Makefile 2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2.new/arch/mips/pci/Makefile 2007-01-23 14:49:40.000000000 +0100
-@@ -53,3 +53,4 @@
- obj-$(CONFIG_VICTOR_MPC30X) += fixup-mpc30x.o
- obj-$(CONFIG_ZAO_CAPCELLA) += fixup-capcella.o
- obj-$(CONFIG_WR_PPMC) += fixup-wrppmc.o
-+obj-$(CONFIG_PCI_ADM5120) += ops-adm5120.o pci-adm5120.o
-diff -urN linux-2.6.19.2/include/asm-mips/bootinfo.h linux-2.6.19.2.new/include/asm-mips/bootinfo.h
---- linux-2.6.19.2/include/asm-mips/bootinfo.h 2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2.new/include/asm-mips/bootinfo.h 2007-01-23 14:49:40.000000000 +0100
-@@ -212,6 +212,12 @@
- #define MACH_GROUP_NEC_EMMA2RH 25 /* NEC EMMA2RH (was 23) */
- #define MACH_NEC_MARKEINS 0 /* NEC EMMA2RH Mark-eins */
-
-+/*
-+ * Valid machtype for group ADMtek
-+ */
-+#define MACH_GROUP_ADM_GW 23
-+#define MACH_ADM_GW_5120 0
-+
- #define CL_SIZE COMMAND_LINE_SIZE
-
- const char *get_system_type(void);
+++ /dev/null
-diff -urN linux-2.6.19.2/drivers/mtd/maps/Kconfig linux-2.6.19.2-adm5120/drivers/mtd/maps/Kconfig
---- linux-2.6.19.2/drivers/mtd/maps/Kconfig 2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2-adm5120/drivers/mtd/maps/Kconfig 2007-01-23 01:13:39.000000000 +0100
-@@ -622,5 +622,10 @@
-
- This selection automatically selects the map_ram driver.
-
-+config MTD_ADM5120
-+ tristate "Map driver for ADMtek ADM5120 boards"
-+ depends on MIPS_ADM5120
-+ select MTD_CFI_AMDSTD
-+
- endmenu
-
-diff -urN linux-2.6.19.2/drivers/mtd/maps/Makefile linux-2.6.19.2-adm5120/drivers/mtd/maps/Makefile
---- linux-2.6.19.2/drivers/mtd/maps/Makefile 2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2-adm5120/drivers/mtd/maps/Makefile 2007-01-23 01:20:52.000000000 +0100
-@@ -43,6 +43,7 @@
- obj-$(CONFIG_MTD_SOLUTIONENGINE)+= solutionengine.o
- obj-$(CONFIG_MTD_PCI) += pci.o
- obj-$(CONFIG_MTD_ALCHEMY) += alchemy-flash.o
-+obj-$(CONFIG_MTD_ADM5120) += adm5120_mtd.o
- obj-$(CONFIG_MTD_LASAT) += lasat.o
- obj-$(CONFIG_MTD_AUTCPU12) += autcpu12-nvram.o
- obj-$(CONFIG_MTD_EDB7312) += edb7312.o
+++ /dev/null
-diff -urN linux-2.6.19.2/drivers/net/Kconfig linux-2.6.19.2-adm5120/drivers/net/Kconfig
---- linux-2.6.19.2/drivers/net/Kconfig 2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2-adm5120/drivers/net/Kconfig 2007-01-23 01:13:39.000000000 +0100
-@@ -450,6 +450,10 @@
- If you have an Alchemy Semi AU1X00 based system
- say Y. Otherwise, say N.
-
-+config MIPS_ADM5120_ENET
-+ tristate "MIPS ADM5120 Ethernet switch support"
-+ depends on NET_ETHERNET && MIPS_ADM5120
-+
- config NET_SB1250_MAC
- tristate "SB1250 Ethernet support"
- depends on NET_ETHERNET && SIBYTE_SB1xxx_SOC
-diff -urN linux-2.6.19.2/drivers/net/Makefile linux-2.6.19.2-adm5120/drivers/net/Makefile
---- linux-2.6.19.2/drivers/net/Makefile 2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2-adm5120/drivers/net/Makefile 2007-01-23 01:13:39.000000000 +0100
-@@ -164,6 +164,7 @@
- # This is also a 82596 and should probably be merged
- obj-$(CONFIG_LP486E) += lp486e.o
-
-+obj-$(CONFIG_MIPS_ADM5120_ENET) += adm5120sw.o
- obj-$(CONFIG_ETH16I) += eth16i.o
- obj-$(CONFIG_ZORRO8390) += zorro8390.o 8390.o
- obj-$(CONFIG_HPLANCE) += hplance.o 7990.o
+++ /dev/null
-diff -urN linux-2.6.19.2/drivers/serial/Kconfig linux-2.6.19.2-adm5120/drivers/serial/Kconfig
---- linux-2.6.19.2/drivers/serial/Kconfig 2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2-adm5120/drivers/serial/Kconfig 2007-01-23 01:13:39.000000000 +0100
-@@ -246,6 +246,22 @@
-
- comment "Non-8250 serial port support"
-
-+config SERIAL_ADM5120
-+ bool "ADM5120 serial port support"
-+ depends on MIPS_ADM5120
-+ select SERIAL_CORE
-+ select SERIAL_CORE_CONSOLE
-+ help
-+ Driver for the on chip UARTs on the ADM5120 SoC
-+
-+config ADM5120_NR_UARTS
-+ int "Maximum number of ADM5120 serial ports"
-+ depends on SERIAL_ADM5120
-+ default "2"
-+ ---help---
-+ Set this to the number of serial ports you want the driver to
-+ support.
-+
- config SERIAL_AMBA_PL010
- tristate "ARM AMBA PL010 serial port support"
- depends on ARM_AMBA && (BROKEN || !ARCH_VERSATILE)
-diff -urN linux-2.6.19.2/drivers/serial/Makefile linux-2.6.19.2-adm5120/drivers/serial/Makefile
---- linux-2.6.19.2/drivers/serial/Makefile 2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2-adm5120/drivers/serial/Makefile 2007-01-23 01:21:45.000000000 +0100
-@@ -20,6 +20,7 @@
- obj-$(CONFIG_SERIAL_8250_HUB6) += 8250_hub6.o
- obj-$(CONFIG_SERIAL_8250_MCA) += 8250_mca.o
- obj-$(CONFIG_SERIAL_8250_AU1X00) += 8250_au1x00.o
-+obj-$(CONFIG_SERIAL_ADM5120) += adm5120_uart.o
- obj-$(CONFIG_SERIAL_AMBA_PL010) += amba-pl010.o
- obj-$(CONFIG_SERIAL_AMBA_PL011) += amba-pl011.o
- obj-$(CONFIG_SERIAL_CLPS711X) += clps711x.o
-diff -urN linux-2.6.19.2/include/linux/serial_core.h linux-2.6.19.2-adm5120/include/linux/serial_core.h
---- linux-2.6.19.2/include/linux/serial_core.h 2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2-adm5120/include/linux/serial_core.h 2007-01-23 01:13:39.000000000 +0100
-@@ -133,6 +133,9 @@
- #define PORT_S3C2412 73
-
-
-+/* ADMtek ADM5120 SoC */
-+#define PORT_ADM5120 68
-+
- #ifdef __KERNEL__
-
- #include <linux/compiler.h>
+++ /dev/null
-diff -urN linux-2.6.19.2/drivers/usb/core/hub.c linux-2.6.19.2-adm5120/drivers/usb/core/hub.c
---- linux-2.6.19.2/drivers/usb/core/hub.c 2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2-adm5120/drivers/usb/core/hub.c 2007-01-23 01:13:39.000000000 +0100
-@@ -2156,6 +2156,8 @@
- USB_DT_DEVICE << 8, 0,
- buf, GET_DESCRIPTOR_BUFSIZE,
- (i ? USB_CTRL_GET_TIMEOUT : 1000));
-+printk(KERN_CRIT "usb_control_msg: %d %d %d (%d)\n", r, buf->bMaxPacketSize0,
-+buf->bDescriptorType, USB_DT_DEVICE);
- switch (buf->bMaxPacketSize0) {
- case 8: case 16: case 32: case 64: case 255:
- if (buf->bDescriptorType ==
-diff -urN linux-2.6.19.2/drivers/usb/host/Kconfig linux-2.6.19.2-adm5120/drivers/usb/host/Kconfig
---- linux-2.6.19.2/drivers/usb/host/Kconfig 2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2-adm5120/drivers/usb/host/Kconfig 2007-01-23 01:13:39.000000000 +0100
-@@ -192,3 +192,6 @@
- To compile this driver as a module, choose M here: the
- module will be called "sl811_cs".
-
-+config USB_ADM5120_HCD
-+ tristate "ADM5120 HCD support"
-+ depends on USB && MIPS_ADM5120
-diff -urN linux-2.6.19.2/drivers/usb/host/Makefile linux-2.6.19.2-adm5120/drivers/usb/host/Makefile
---- linux-2.6.19.2/drivers/usb/host/Makefile 2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2-adm5120/drivers/usb/host/Makefile 2007-01-23 01:13:39.000000000 +0100
-@@ -16,3 +16,4 @@
- obj-$(CONFIG_USB_SL811_CS) += sl811_cs.o
- obj-$(CONFIG_USB_U132_HCD) += u132-hcd.o
- obj-$(CONFIG_ETRAX_ARCH_V10) += hc_crisv10.o
-+obj-$(CONFIG_USB_ADM5120_HCD) += adm5120-hcd.o
-diff -urN linux-2.6.19.2/drivers/usb/Kconfig linux-2.6.19.2-adm5120/drivers/usb/Kconfig
---- linux-2.6.19.2/drivers/usb/Kconfig 2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2-adm5120/drivers/usb/Kconfig 2007-01-23 01:13:39.000000000 +0100
-@@ -91,8 +91,6 @@
-
- source "drivers/usb/net/Kconfig"
-
--source "drivers/usb/mon/Kconfig"
--
- comment "USB port drivers"
- depends on USB
-
-diff -urN linux-2.6.19.2/drivers/usb/Makefile linux-2.6.19.2-adm5120/drivers/usb/Makefile
---- linux-2.6.19.2/drivers/usb/Makefile 2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2-adm5120/drivers/usb/Makefile 2007-01-23 01:22:18.000000000 +0100
-@@ -17,6 +17,7 @@
- obj-$(CONFIG_USB_U132_HCD) += host/
- obj-$(CONFIG_ETRAX_USB_HOST) += host/
- obj-$(CONFIG_USB_OHCI_AT91) += host/
-+obj-$(CONFIG_USB_ADM5120_HCD) += host/
-
- obj-$(CONFIG_USB_ACM) += class/
- obj-$(CONFIG_USB_PRINTER) += class/
+++ /dev/null
-diff -urN linux-2.6.19.2/drivers/char/Kconfig linux-2.6.19.2-adm5120/drivers/char/Kconfig
---- linux-2.6.19.2/drivers/char/Kconfig 2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2-adm5120/drivers/char/Kconfig 2007-01-23 01:13:39.000000000 +0100
-@@ -1034,7 +1034,9 @@
- The mmtimer device allows direct userspace access to the
- Altix system timer.
-
--source "drivers/char/tpm/Kconfig"
-+config ADM5120_GPIO
-+ tristate "ADM5120 GPIO"
-+ depends on MIPS_ADM5120
-
- config TELCLOCK
- tristate "Telecom clock driver for MPBL0010 ATCA SBC"
-diff -urN linux-2.6.19.2/drivers/char/Makefile linux-2.6.19.2-adm5120/drivers/char/Makefile
---- linux-2.6.19.2/drivers/char/Makefile 2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2-adm5120/drivers/char/Makefile 2007-01-23 01:20:01.000000000 +0100
-@@ -90,6 +90,7 @@
- obj-$(CONFIG_GPIO_VR41XX) += vr41xx_giu.o
- obj-$(CONFIG_TANBAC_TB0219) += tb0219.o
- obj-$(CONFIG_TELCLOCK) += tlclk.o
-+obj-$(CONFIG_ADM5120_GPIO) += adm5120_gpio.o
-
- obj-$(CONFIG_WATCHDOG) += watchdog/
- obj-$(CONFIG_MWAVE) += mwave/
+++ /dev/null
-diff -Nur linux-2.6.19.2/drivers/mtd/Kconfig.old linux-2.6.19.2/drivers/mtd/Kconfig
---- linux-2.6.19.2/drivers/mtd/Kconfig.old 2007-03-25 08:13:02.000000000 +0200
-+++ linux-2.6.19.2/drivers/mtd/Kconfig 2007-03-26 13:37:47.000000000 +0200
-@@ -157,6 +157,22 @@
- for your particular device. It won't happen automatically. The
- 'armflash' map driver (CONFIG_MTD_ARMFLASH) does this, for example.
-
-+config MTD_MYLOADER_PARTS
-+ tristate "MyLoader partition parsing"
-+ depends on MIPS_ADM5120 && MTD_PARTITIONS
-+ ---help---
-+ MyLoader is a bootloader which allows the user to define partitions
-+ in flash devices, by putting a table in the second erase block
-+ on the device, similar to a partition table. This table gives the
-+ offsets and lengths of the user defined partitions.
-+
-+ If you need code which can detect and parse these tables, and
-+ register MTD 'partitions' corresponding to each image detected,
-+ enable this option.
-+
-+ You will still need the parsing functions to be called by the driver
-+ for your particular device. It won't happen automatically.
-+
- comment "User Modules And Translation Layers"
- depends on MTD
-
-diff -Nur linux-2.6.19.2/drivers/mtd/Makefile.old linux-2.6.19.2/drivers/mtd/Makefile
---- linux-2.6.19.2/drivers/mtd/Makefile.old 2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2/drivers/mtd/Makefile 2007-03-26 13:28:23.000000000 +0200
-@@ -12,6 +12,7 @@
- obj-$(CONFIG_MTD_REDBOOT_PARTS) += redboot.o
- obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdlinepart.o
- obj-$(CONFIG_MTD_AFS_PARTS) += afs.o
-+obj-$(CONFIG_MTD_MYLOADER_PARTS) += myloader.o
-
- # 'Users' - code which presents functionality to userspace.
- obj-$(CONFIG_MTD_CHAR) += mtdchar.o
+++ /dev/null
---- linux-2.6.19.2/drivers/mtd/chips/Kconfig.old 2007-01-11 03:10:36.000000000 +0800
-+++ linux-2.6.19.2/drivers/mtd/chips/Kconfig 2007-03-29 14:43:32.000000000 +0800
-@@ -199,6 +199,14 @@
- provides support for one of those command sets, used on chips
- including the AMD Am29LV320.
-
-+config MTD_CFI_AMDSTD_FORCE_BOTTOM_BOOT
-+ bool "Force bottom boot for Macronix flash chips"
-+ depends on MTD_CFI_AMDSTD
-+ help
-+ Some Macronix flash chips have wrong CFI info, and the driver may
-+ detect the type incorrectly. Select this if the chip part number
-+ ends with BTC.
-+
- config MTD_CFI_STAA
- tristate "Support for ST (Advanced Architecture) flash chips"
- depends on MTD_GEN_PROBE
---- linux-2.6.19.2/drivers/mtd/chips/cfi_cmdset_0002.c.old 2007-03-22 16:14:56.000000000 +0800
-+++ linux-2.6.19.2/drivers/mtd/chips/cfi_cmdset_0002.c 2007-03-29 14:07:28.000000000 +0800
-@@ -320,6 +320,11 @@
- cfi_tell_features(extp);
- #endif
-
-+#ifdef CONFIG_MTD_CFI_AMDSTD_FORCE_BOTTOM_BOOT
-+ extp->TopBottom = 2;
-+ bootloc = extp->TopBottom;
-+#endif
-+
- bootloc = extp->TopBottom;
- if ((bootloc != 2) && (bootloc != 3)) {
- printk(KERN_WARNING "%s: CFI does not contain boot "
+++ /dev/null
-diff -urN linux.old/drivers/block/Kconfig linux.dev/drivers/block/Kconfig
---- linux.old/drivers/block/Kconfig 2006-10-26 02:43:39.000000000 +0200
-+++ linux.dev/drivers/block/Kconfig 2006-10-26 00:11:14.000000000 +0200
-@@ -456,4 +456,12 @@
- This driver provides Support for ATA over Ethernet block
- devices like the Coraid EtherDrive (R) Storage Blade.
-
-+config BLK_DEV_CF_MIPS
-+ bool "CF slot of RB532 board"
-+ depends on MIKROTIK_RB500 || MIPS_ADM5120
-+ default y
-+ help
-+ The Routerboard 532 has a CF slot on it. Enable the special block
-+ device driver for it.
-+
- endmenu
-diff -urN linux.old/drivers/block/Makefile linux.dev/drivers/block/Makefile
---- linux.old/drivers/block/Makefile 2006-06-18 03:49:35.000000000 +0200
-+++ linux.dev/drivers/block/Makefile 2006-10-26 02:44:10.000000000 +0200
-@@ -29,4 +29,5 @@
- obj-$(CONFIG_VIODASD) += viodasd.o
- obj-$(CONFIG_BLK_DEV_SX8) += sx8.o
- obj-$(CONFIG_BLK_DEV_UB) += ub.o
-+obj-$(CONFIG_BLK_DEV_CF_MIPS) += rb500/
-
-diff -urN linux.old/drivers/block/rb500/ata.c linux.dev/drivers/block/rb500/ata.c
---- linux.old/drivers/block/rb500/ata.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/drivers/block/rb500/ata.c 2006-10-26 00:11:14.000000000 +0200
-@@ -0,0 +1,485 @@
-+/* CF-mips driver
-+ This is a block driver for the direct (mmaped) interface to the CF-slot,
-+ found in Routerboard.com's RB532 board
-+ See SDK provided from routerboard.com.
-+
-+ Module adapted By P.Christeas <p_christeas@yahoo.com>, 2005-6.
-+ Cleaned up and adapted to platform_device by Felix Fietkau <nbd@openwrt.org>
-+
-+ This work is redistributed under the terms of the GNU General Public License.
-+*/
-+
-+#include <linux/kernel.h> /* printk() */
-+#include <linux/module.h> /* module to be loadable */
-+#include <linux/delay.h>
-+#include <linux/sched.h>
-+#include <linux/pci.h>
-+#include <linux/ioport.h> /* request_mem_region() */
-+#include <asm/unaligned.h> /* ioremap() */
-+#include <asm/io.h> /* ioremap() */
-+#include <asm/rc32434/rb.h>
-+
-+#include "ata.h"
-+
-+#define REQUEST_MEM_REGION 0
-+#define DEBUG 1
-+
-+#if DEBUG
-+#define DEBUGP printk
-+#else
-+#define DEBUGP(format, args...)
-+#endif
-+
-+#define SECS 1000000 /* unit for wait_not_busy() is 1us */
-+
-+unsigned cf_head = 0;
-+unsigned cf_cyl = 0;
-+unsigned cf_spt = 0;
-+unsigned cf_sectors = 0;
-+static unsigned cf_block_size = 1;
-+static void *baddr = 0;
-+
-+#define DBUF32 ((volatile u32 *)((unsigned long)dev->baddr | ATA_DBUF_OFFSET))
-+
-+
-+static void cf_do_tasklet(unsigned long dev_l);
-+
-+
-+static inline void wareg(u8 val, unsigned reg, struct cf_mips_dev* dev)
-+{
-+ writeb(val, dev->baddr + ATA_REG_OFFSET + reg);
-+}
-+
-+static inline u8 rareg(unsigned reg, struct cf_mips_dev* dev)
-+{
-+ return readb(dev->baddr + ATA_REG_OFFSET + reg);
-+}
-+
-+static inline int get_gpio_bit(gpio_func ofs, struct cf_mips_dev *dev)
-+{
-+ return (gpio_get(ofs) >> dev->pin) & 1;
-+}
-+
-+static inline void set_gpio_bit(int bit, gpio_func ofs, struct cf_mips_dev *dev)
-+{
-+ gpio_set(ofs, (1 << dev->pin), ((bit & 1) << dev->pin));
-+}
-+
-+static inline int cfrdy(struct cf_mips_dev *dev)
-+{
-+ return get_gpio_bit(DATA, dev);
-+}
-+
-+static inline void prepare_cf_irq(struct cf_mips_dev *dev)
-+{
-+ set_gpio_bit(1, ILEVEL, dev); /* interrupt on cf ready (not busy) */
-+ set_gpio_bit(0, ISTAT, dev); /* clear interrupt status */
-+}
-+
-+static inline int cf_present(struct cf_mips_dev* dev)
-+{
-+ /* TODO: read and configure CIS into memory mapped mode
-+ * TODO: parse CISTPL_CONFIG on CF+ cards to get base address (0x200)
-+ * TODO: maybe adjust power saving setting for Hitachi Microdrive
-+ */
-+ int i;
-+
-+ /* setup CFRDY GPIO as input */
-+ set_gpio_bit(0, FUNC, dev);
-+ set_gpio_bit(0, CFG, dev);
-+
-+ for (i = 0; i < 0x10; ++i) {
-+ if (rareg(i,dev) != 0xff)
-+ return 1;
-+ }
-+ return 0;
-+}
-+
-+static inline int is_busy(struct cf_mips_dev *dev)
-+{
-+ return !cfrdy(dev);
-+}
-+
-+static int wait_not_busy(int to_us, int wait_for_busy,struct cf_mips_dev *dev)
-+{
-+ int us_passed = 0;
-+ if (wait_for_busy && !is_busy(dev)) {
-+ /* busy must appear within 400ns,
-+ * but it may dissapear before we see it
-+ * => must not wait for busy in a loop
-+ */
-+ ndelay(400);
-+ }
-+
-+ do {
-+ if (us_passed)
-+ udelay(1); /* never reached in async mode */
-+ if (!is_busy(dev)) {
-+ if (us_passed > 1 * SECS) {
-+ printk(KERN_WARNING "cf-mips: not busy ok (after %dus)"
-+ ", status 0x%02x\n", us_passed, (unsigned) rareg(ATA_REG_ST,dev));
-+ }
-+ return CF_TRANS_OK;
-+ }
-+ if (us_passed == 1 * SECS) {
-+ printk(KERN_WARNING "cf-mips: wait not busy %dus..\n", to_us);
-+ }
-+ if (dev->async_mode) {
-+ dev->to_timer.expires = jiffies + (to_us * HZ / SECS);
-+ dev->irq_enable_time = jiffies;
-+ prepare_cf_irq(dev);
-+ if (is_busy(dev)) {
-+ add_timer(&dev->to_timer);
-+ enable_irq(dev->irq);
-+ return CF_TRANS_IN_PROGRESS;
-+ }
-+ continue;
-+ }
-+ ++us_passed;
-+ } while (us_passed < to_us);
-+
-+ printk(KERN_ERR "cf-mips: wait not busy timeout (%dus)"
-+ ", status 0x%02x, state %d\n",
-+ to_us, (unsigned) rareg(ATA_REG_ST,dev), dev->tstate);
-+ return CF_TRANS_FAILED;
-+}
-+
-+static irqreturn_t cf_irq_handler(int irq, void *dev_id)
-+{
-+ /* While tasklet has not disabled irq, irq will be retried all the time
-+ * because of ILEVEL matching GPIO pin status => deadlock.
-+ * To avoid this, we change ILEVEL to 0.
-+ */
-+ struct cf_mips_dev *dev=dev_id;
-+
-+ set_gpio_bit(0, ILEVEL, dev);
-+ set_gpio_bit(0, ISTAT, dev);
-+
-+ del_timer(&dev->to_timer);
-+ tasklet_schedule(&dev->tasklet);
-+ return IRQ_HANDLED;
-+}
-+
-+static int do_reset(struct cf_mips_dev *dev)
-+{
-+ printk(KERN_INFO "cf-mips: resetting..\n");
-+
-+ wareg(ATA_REG_DC_SRST, ATA_REG_DC,dev);
-+ udelay(1); /* FIXME: how long should we wait here? */
-+ wareg(0, ATA_REG_DC,dev);
-+
-+ return wait_not_busy(30 * SECS, 1,dev);
-+}
-+
-+static int set_multiple(struct cf_mips_dev *dev)
-+{
-+ if (dev->block_size <= 1)
-+ return CF_TRANS_OK;
-+
-+ wareg(dev->block_size, ATA_REG_SC,dev);
-+ wareg(ATA_REG_DH_BASE | ATA_REG_DH_LBA, ATA_REG_DH,dev);
-+ wareg(ATA_CMD_SET_MULTIPLE, ATA_REG_CMD,dev);
-+
-+ return wait_not_busy(10 * SECS, 1,dev);
-+}
-+
-+static int set_cmd(struct cf_mips_dev *dev)
-+{
-+ //DEBUGP(KERN_INFO "cf-mips: ata cmd 0x%02x\n", dev->tcmd);
-+ // sector_count should be <=24 bits..
-+ BUG_ON(dev->tsect_start>=0x10000000);
-+ // This way, it addresses 2^24 * 512 = 128G
-+
-+ if (dev->tsector_count) {
-+ wareg(dev->tsector_count & 0xff, ATA_REG_SC,dev);
-+ wareg(dev->tsect_start & 0xff, ATA_REG_SN,dev);
-+ wareg((dev->tsect_start >> 8) & 0xff, ATA_REG_CL,dev);
-+ wareg((dev->tsect_start >> 16) & 0xff, ATA_REG_CH,dev);
-+ }
-+ wareg(((dev->tsect_start >> 24) & 0x0f) | ATA_REG_DH_BASE | ATA_REG_DH_LBA,
-+ ATA_REG_DH,dev); /* select drive on all commands */
-+ wareg(dev->tcmd, ATA_REG_CMD,dev);
-+ return wait_not_busy(10 * SECS, 1,dev);
-+}
-+
-+static int do_trans(struct cf_mips_dev *dev)
-+{
-+ int res;
-+ unsigned st;
-+ int transfered;
-+
-+ //printk("do_trans: %d sectors left\n",dev->tsectors_left);
-+ while (dev->tsectors_left) {
-+ transfered = 0;
-+
-+ st = rareg(ATA_REG_ST,dev);
-+ if (!(st & ATA_REG_ST_DRQ)) {
-+ printk(KERN_ERR "cf-mips: do_trans without DRQ (status 0x%x)!\n", st);
-+ if (st & ATA_REG_ST_ERR) {
-+ int errId = rareg(ATA_REG_ERR,dev);
-+ printk(KERN_ERR "cf-mips: %s error, status 0x%x, errid 0x%x\n",
-+ (dev->tread ? "read" : "write"), st, errId);
-+ }
-+ return CF_TRANS_FAILED;
-+ }
-+ do { /* Fill/read the buffer one block */
-+ u32 *qbuf, *qend;
-+ qbuf = (u32 *)dev->tbuf;
-+ qend = qbuf + CF_SECT_SIZE / sizeof(u32);
-+ if (dev->tread) {
-+ while (qbuf!=qend)
-+ put_unaligned(*DBUF32,qbuf++);
-+ //*(qbuf++) = *DBUF32;
-+ }
-+ else {
-+ while(qbuf!=qend)
-+ *DBUF32 = get_unaligned(qbuf++);
-+ }
-+
-+ dev->tsectors_left--;
-+ dev->tbuf += CF_SECT_SIZE;
-+ dev->tbuf_size -= CF_SECT_SIZE;
-+ transfered++;
-+ } while (transfered != dev->block_size && dev->tsectors_left > 0);
-+
-+ res = wait_not_busy(10 * SECS, 1,dev);
-+ if (res != CF_TRANS_OK)
-+ return res;
-+ };
-+
-+ st = rareg(ATA_REG_ST,dev);
-+ if (st & (ATA_REG_ST_DRQ | ATA_REG_ST_DWF | ATA_REG_ST_ERR)) {
-+ if (st & ATA_REG_ST_DRQ) {
-+ printk(KERN_ERR "cf-mips: DRQ after all %d sectors are %s"
-+ ", status 0x%x\n", dev->tsector_count, (dev->tread ? "read" : "written"), st);
-+ } else if (st & ATA_REG_ST_DWF) {
-+ printk(KERN_ERR "cf-mips: write fault, status 0x%x\n", st);
-+ } else {
-+ int errId = rareg(ATA_REG_ERR,dev);
-+ printk(KERN_ERR "cf-mips: %s error, status 0x%x, errid 0x%x\n",
-+ (dev->tread ? "read" : "write"), st, errId);
-+ }
-+ return CF_TRANS_FAILED;
-+ }
-+ return CF_TRANS_OK;
-+}
-+
-+static int cf_do_state(struct cf_mips_dev *dev)
-+{
-+ int res;
-+ switch (dev->tstate) { /* fall through everywhere */
-+ case TS_IDLE:
-+ dev->tstate = TS_READY;
-+ if (is_busy(dev)) {
-+ dev->tstate = TS_AFTER_RESET;
-+ res = do_reset(dev);
-+ if (res != CF_TRANS_OK)
-+ break;
-+ }
-+ case TS_AFTER_RESET:
-+ if (dev->tstate == TS_AFTER_RESET) {
-+ dev->tstate = TS_READY;
-+ res = set_multiple(dev);
-+ if (res != CF_TRANS_OK)
-+ break;
-+ }
-+ case TS_READY:
-+ dev->tstate = TS_CMD;
-+ res = set_cmd(dev);
-+ if (res != CF_TRANS_OK)
-+ break;;
-+ case TS_CMD:
-+ dev->tstate = TS_TRANS;
-+ case TS_TRANS:
-+ res = do_trans(dev);
-+ break;
-+ default:
-+ printk(KERN_ERR "cf-mips: BUG: unknown tstate %d\n", dev->tstate);
-+ return CF_TRANS_FAILED;
-+ }
-+ if (res != CF_TRANS_IN_PROGRESS)
-+ dev->tstate = TS_IDLE;
-+ return res;
-+}
-+
-+static void cf_do_tasklet(unsigned long dev_l)
-+{
-+ struct cf_mips_dev* dev=(struct cf_mips_dev*) dev_l;
-+ int res;
-+
-+ disable_irq(dev->irq);
-+
-+ if (dev->tstate == TS_IDLE)
-+ return; /* can happen when irq is first registered */
-+
-+#if 0
-+ DEBUGP(KERN_WARNING "cf-mips: not busy ok (tasklet) status 0x%02x\n",
-+ (unsigned) rareg(ATA_REG_ST,dev));
-+#endif
-+
-+ res = cf_do_state(dev);
-+ if (res == CF_TRANS_IN_PROGRESS)
-+ return;
-+ cf_async_trans_done(dev,res);
-+}
-+
-+static void cf_async_timeout(unsigned long dev_l)
-+{
-+ struct cf_mips_dev* dev=(struct cf_mips_dev*) dev_l;
-+ disable_irq(dev->irq);
-+ /* Perhaps send abort to the device? */
-+ printk(KERN_ERR "cf-mips: wait not busy timeout (%lus)"
-+ ", status 0x%02x, state %d\n",
-+ jiffies - dev->irq_enable_time, (unsigned) rareg(ATA_REG_ST,dev), dev->tstate);
-+ dev->tstate = TS_IDLE;
-+ cf_async_trans_done(dev,CF_TRANS_FAILED);
-+}
-+
-+int cf_do_transfer(struct cf_mips_dev* dev,sector_t sector, unsigned long nsect,
-+ char* buffer, int is_write)
-+{
-+ BUG_ON(dev->tstate!=TS_IDLE);
-+ if (nsect > ATA_MAX_SECT_PER_CMD) {
-+ printk(KERN_WARNING "cf-mips: sector count %lu out of range\n",nsect);
-+ return CF_TRANS_FAILED;
-+ }
-+ if (sector + nsect > dev->sectors) {
-+ printk(KERN_WARNING "cf-mips: sector %lu out of range\n",sector);
-+ return CF_TRANS_FAILED;
-+ }
-+ dev->tbuf = buffer;
-+ dev->tbuf_size = nsect*512;
-+ dev->tsect_start = sector;
-+ dev->tsector_count = nsect;
-+ dev->tsectors_left = dev->tsector_count;
-+ dev->tread = (is_write)?0:1;
-+
-+ dev->tcmd = (dev->block_size == 1 ?
-+ (is_write ? ATA_CMD_WRITE_SECTORS : ATA_CMD_READ_SECTORS) :
-+ (is_write ? ATA_CMD_WRITE_MULTIPLE : ATA_CMD_READ_MULTIPLE));
-+
-+ return cf_do_state(dev);
-+}
-+
-+static int do_identify(struct cf_mips_dev *dev)
-+{
-+ u16 sbuf[CF_SECT_SIZE >> 1];
-+ int res;
-+ char tstr[17]; //serial
-+ BUG_ON(dev->tstate!=TS_IDLE);
-+ dev->tbuf = (char *) sbuf;
-+ dev->tbuf_size = CF_SECT_SIZE;
-+ dev->tsect_start = 0;
-+ dev->tsector_count = 0;
-+ dev->tsectors_left = 1;
-+ dev->tread = 1;
-+ dev->tcmd = ATA_CMD_IDENTIFY_DRIVE;
-+
-+ DEBUGP(KERN_INFO "cf-mips: identify drive..\n");
-+ res = cf_do_state(dev);
-+ if (res == CF_TRANS_IN_PROGRESS) {
-+ printk(KERN_ERR "cf-mips: BUG: async identify cmd\n");
-+ return CF_TRANS_FAILED;
-+ }
-+ if (res != CF_TRANS_OK)
-+ return 0;
-+
-+ dev->head = sbuf[3];
-+ dev->cyl = sbuf[1];
-+ dev->spt = sbuf[6];
-+ dev->sectors = ((unsigned long) sbuf[7] << 16) | sbuf[8];
-+ dev->dtype=sbuf[0];
-+ memcpy(tstr,&sbuf[12],16);
-+ tstr[16]=0;
-+ printk(KERN_INFO "cf-mips: %s detected, C/H/S=%d/%d/%d sectors=%u (%uMB) Serial=%s\n",
-+ (sbuf[0] == 0x848A ? "CF card" : "ATA drive"), dev->cyl, dev->head,
-+ dev->spt, dev->sectors, dev->sectors >> 11,tstr);
-+ return 1;
-+}
-+
-+static void init_multiple(struct cf_mips_dev * dev)
-+{
-+ int res;
-+ DEBUGP(KERN_INFO "cf-mips: detecting block size\n");
-+
-+ dev->block_size = 128; /* max block size = 128 sectors (64KB) */
-+ do {
-+ wareg(dev->block_size, ATA_REG_SC,dev);
-+ wareg(ATA_REG_DH_BASE | ATA_REG_DH_LBA, ATA_REG_DH,dev);
-+ wareg(ATA_CMD_SET_MULTIPLE, ATA_REG_CMD,dev);
-+
-+ res = wait_not_busy(10 * SECS, 1,dev);
-+ if (res != CF_TRANS_OK) {
-+ printk(KERN_ERR "cf-mips: failed to detect block size: busy!\n");
-+ dev->block_size = 1;
-+ return;
-+ }
-+ if ((rareg(ATA_REG_ST,dev) & ATA_REG_ST_ERR) == 0)
-+ break;
-+ dev->block_size /= 2;
-+ } while (dev->block_size > 1);
-+
-+ printk(KERN_INFO "cf-mips: multiple sectors = %d\n", dev->block_size);
-+}
-+
-+int cf_init(struct cf_mips_dev *dev)
-+{
-+ tasklet_init(&dev->tasklet,cf_do_tasklet,(unsigned long)dev);
-+ dev->baddr = ioremap_nocache((unsigned long)dev->base, CFDEV_BUF_SIZE);
-+ if (!dev->baddr) {
-+ printk(KERN_ERR "cf-mips: cf_init: ioremap for (%lx,%x) failed\n",
-+ (unsigned long) dev->base, CFDEV_BUF_SIZE);
-+ return -EBUSY;
-+ }
-+
-+ if (!cf_present(dev)) {
-+ printk(KERN_WARNING "cf-mips: cf card not present\n");
-+ iounmap(dev->baddr);
-+ return -ENODEV;
-+ }
-+
-+ if (do_reset(dev) != CF_TRANS_OK) {
-+ printk(KERN_ERR "cf-mips: cf reset failed\n");
-+ iounmap(dev->baddr);
-+ return -EBUSY;
-+ }
-+
-+ if (!do_identify(dev)) {
-+ printk(KERN_ERR "cf-mips: cf identify failed\n");
-+ iounmap(dev->baddr);
-+ return -EBUSY;
-+ }
-+
-+/* set_apm_level(ATA_APM_WITH_STANDBY); */
-+ init_multiple(dev);
-+
-+ init_timer(&dev->to_timer);
-+ dev->to_timer.function = cf_async_timeout;
-+ dev->to_timer.data = (unsigned long)dev;
-+
-+ prepare_cf_irq(dev);
-+ if (request_irq(dev->irq, cf_irq_handler, 0, "CF Mips", dev)) {
-+ printk(KERN_ERR "cf-mips: failed to get irq\n");
-+ iounmap(dev->baddr);
-+ return -EBUSY;
-+ }
-+ /* Disable below would be odd, because request will enable, and the tasklet
-+ will disable it itself */
-+ //disable_irq(dev->irq);
-+
-+ dev->async_mode = 1;
-+
-+ return 0;
-+}
-+
-+void cf_cleanup(struct cf_mips_dev *dev)
-+{
-+ iounmap(dev->baddr);
-+ free_irq(dev->irq, NULL);
-+#if REQUEST_MEM_REGION
-+ release_mem_region((unsigned long)dev->base, CFDEV_BUF_SIZE);
-+#endif
-+}
-+
-+
-+/*eof*/
-diff -urN linux.old/drivers/block/rb500/ata.h linux.dev/drivers/block/rb500/ata.h
---- linux.old/drivers/block/rb500/ata.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/drivers/block/rb500/ata.h 2006-10-26 00:11:14.000000000 +0200
-@@ -0,0 +1,143 @@
-+/* CF-mips driver
-+ This is a block driver for the direct (mmaped) interface to the CF-slot,
-+ found in Routerboard.com's RB532 board
-+ See SDK provided from routerboard.com.
-+
-+ Module adapted By P.Christeas <p_christeas@yahoo.com>, 2005-6.
-+ Cleaned up and adapted to platform_device by Felix Fietkau <nbd@openwrt.org>
-+
-+ This work is redistributed under the terms of the GNU General Public License.
-+*/
-+
-+#ifndef __CFMIPS_ATA_H__
-+#define __CFMIPS_ATA_H__
-+
-+#include <linux/interrupt.h>
-+
-+#define CFG_DC_DEV1 (void*)0xb8010010
-+#define CFG_DC_DEVBASE 0x0
-+#define CFG_DC_DEVMASK 0x4
-+#define CFG_DC_DEVC 0x8
-+#define CFG_DC_DEVTC 0xC
-+
-+#define CFDEV_BUF_SIZE 0x1000
-+#define ATA_CIS_OFFSET 0x200
-+#define ATA_REG_OFFSET 0x800
-+#define ATA_DBUF_OFFSET 0xC00
-+
-+#define ATA_REG_FEAT 0x1
-+#define ATA_REG_SC 0x2
-+#define ATA_REG_SN 0x3
-+#define ATA_REG_CL 0x4
-+#define ATA_REG_CH 0x5
-+#define ATA_REG_DH 0x6
-+#define ATA_REG_DH_BASE 0xa0
-+#define ATA_REG_DH_LBA 0x40
-+#define ATA_REG_DH_DRV 0x10
-+#define ATA_REG_CMD 0x7
-+#define ATA_REG_ST 0x7
-+#define ATA_REG_ST_BUSY 0x80
-+#define ATA_REG_ST_RDY 0x40
-+#define ATA_REG_ST_DWF 0x20
-+#define ATA_REG_ST_DSC 0x10
-+#define ATA_REG_ST_DRQ 0x08
-+#define ATA_REG_ST_CORR 0x04
-+#define ATA_REG_ST_ERR 0x01
-+#define ATA_REG_ERR 0xd
-+#define ATA_REG_DC 0xe
-+#define ATA_REG_DC_IEN 0x02
-+#define ATA_REG_DC_SRST 0x04
-+
-+#define ATA_CMD_READ_SECTORS 0x20
-+#define ATA_CMD_WRITE_SECTORS 0x30
-+#define ATA_CMD_EXEC_DRIVE_DIAG 0x90
-+#define ATA_CMD_READ_MULTIPLE 0xC4
-+#define ATA_CMD_WRITE_MULTIPLE 0xC5
-+#define ATA_CMD_SET_MULTIPLE 0xC6
-+#define ATA_CMD_IDENTIFY_DRIVE 0xEC
-+#define ATA_CMD_SET_FEATURES 0xEF
-+
-+#define ATA_FEATURE_ENABLE_APM 0x05
-+#define ATA_FEATURE_DISABLE_APM 0x85
-+#define ATA_APM_DISABLED 0x00
-+#define ATA_APM_MIN_POWER 0x01
-+#define ATA_APM_WITH_STANDBY 0x7f
-+#define ATA_APM_WITHOUT_STANDBY 0x80
-+#define ATA_APM_MAX_PERFORMANCE 0xfe
-+
-+#define CF_SECT_SIZE 0x200
-+/* That is the ratio CF_SECT_SIZE/512 (the kernel sector size) */
-+#define CF_KERNEL_MUL 1
-+#define ATA_MAX_SECT_PER_CMD 0x100
-+
-+#define CF_TRANS_FAILED 0
-+#define CF_TRANS_OK 1
-+#define CF_TRANS_IN_PROGRESS 2
-+
-+
-+enum trans_state {
-+ TS_IDLE = 0,
-+ TS_AFTER_RESET,
-+ TS_READY,
-+ TS_CMD,
-+ TS_TRANS
-+};
-+
-+//
-+// #if DEBUG
-+// static unsigned long busy_time;
-+// #endif
-+
-+/** Struct to hold the cfdev
-+Actually, all the data here only has one instance. However, for
-+reasons of programming conformity, it is passed around as a pointer
-+*/
-+struct cf_mips_dev {
-+ void *base; /* base address for I/O */
-+ void *baddr; /* remapped address */
-+
-+ int pin; /* gpio pin */
-+ int irq; /* gpio irq */
-+
-+ unsigned head;
-+ unsigned cyl;
-+ unsigned spt;
-+ unsigned sectors;
-+
-+ unsigned short block_size;
-+ unsigned dtype ; // ATA or CF
-+ struct request_queue *queue;
-+ struct gendisk *gd;
-+
-+ /* Transaction state */
-+ enum trans_state tstate;
-+ char *tbuf;
-+ unsigned long tbuf_size;
-+ sector_t tsect_start;
-+ unsigned tsector_count;
-+ unsigned tsectors_left;
-+ int tread;
-+ unsigned tcmd;
-+ int async_mode;
-+ unsigned long irq_enable_time;
-+
-+ struct request *active_req; /* A request is being carried out. Is that different from tstate? */
-+ int users;
-+ struct timer_list to_timer;
-+ struct tasklet_struct tasklet;
-+
-+ /** This lock ensures that the requests to this device are all done
-+ atomically. Transfers can run in parallel, requests are all queued
-+ one-by-one */
-+ spinlock_t lock;
-+};
-+
-+int cf_do_transfer(struct cf_mips_dev* dev,sector_t sector, unsigned long nsect,
-+ char* buffer, int is_write);
-+int cf_init(struct cf_mips_dev* dev);
-+void cf_cleanup(struct cf_mips_dev* dev);
-+
-+void cf_async_trans_done(struct cf_mips_dev* dev, int result);
-+// void *cf_get_next_buf(unsigned long *buf_size);
-+
-+#endif
-diff -urN linux.old/drivers/block/rb500/bdev.c linux.dev/drivers/block/rb500/bdev.c
---- linux.old/drivers/block/rb500/bdev.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/drivers/block/rb500/bdev.c 2006-10-26 00:11:14.000000000 +0200
-@@ -0,0 +1,339 @@
-+/* CF-mips driver
-+ This is a block driver for the direct (mmaped) interface to the CF-slot,
-+ found in Routerboard.com's RB532 board
-+ See SDK provided from routerboard.com.
-+
-+ Module adapted By P.Christeas <p_christeas@yahoo.com>, 2005-6.
-+ Cleaned up and adapted to platform_device by Felix Fietkau <nbd@openwrt.org>
-+
-+ This work is redistributed under the terms of the GNU General Public License.
-+*/
-+
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/init.h>
-+#include <linux/time.h>
-+#include <linux/wait.h>
-+#include <linux/fs.h>
-+#include <linux/genhd.h>
-+#include <linux/blkdev.h>
-+#include <linux/blkpg.h>
-+#include <linux/hdreg.h>
-+#include <linux/platform_device.h>
-+
-+#include <asm/uaccess.h>
-+#include <asm/io.h>
-+
-+#include <asm/rc32434/rb.h>
-+
-+#ifdef DEBUG
-+#define DEBUGP printk
-+#define DLEVEL 1
-+#else
-+#define DEBUGP(format, args...)
-+#define DLEVEL 0
-+#endif
-+
-+#define CF_MIPS_MAJOR 13
-+#define MAJOR_NR CF_MIPS_MAJOR
-+#define CF_MAX_PART 16 /* max 15 partitions */
-+
-+#include "ata.h"
-+
-+//extern struct block_device_operations cf_bdops;
-+
-+// static struct hd_struct cf_parts[CF_MAX_PART];
-+// static int cf_part_sizes[CF_MAX_PART];
-+// static int cf_hsect_sizes[CF_MAX_PART];
-+// static int cf_max_sectors[CF_MAX_PART];
-+// static int cf_blksize_sizes[CF_MAX_PART];
-+
-+// static spinlock_t lock = SPIN_LOCK_UNLOCKED;
-+
-+// volatile int cf_busy = 0;
-+
-+static struct request *active_req = NULL;
-+
-+static int cf_open (struct inode *, struct file *);
-+static int cf_release (struct inode *, struct file *);
-+static int cf_ioctl (struct inode *, struct file *, unsigned, unsigned long);
-+
-+static void cf_request(request_queue_t * q);
-+static int cf_transfer(const struct request *req);
-+
-+/*long (*unlocked_ioctl) (struct file *, unsigned, unsigned long);
-+long (*compat_ioctl) (struct file *, unsigned, unsigned long);*/
-+// int (*direct_access) (struct block_device *, sector_t, unsigned long *);
-+// int (*media_changed) (struct gendisk *);
-+// int (*revalidate_disk) (struct gendisk *);
-+
-+static struct block_device_operations cf_bdops = {
-+ .owner = THIS_MODULE,
-+ .open = cf_open,
-+ .release = cf_release,
-+ .ioctl = cf_ioctl,
-+ .media_changed = NULL,
-+ .unlocked_ioctl = NULL,
-+ .revalidate_disk = NULL,
-+ .compat_ioctl = NULL,
-+ .direct_access = NULL
-+};
-+
-+
-+int cf_mips_probe(struct platform_device *pdev)
-+{
-+ struct gendisk* cf_gendisk=NULL;
-+ struct cf_device *cdev = (struct cf_device *) pdev->dev.platform_data;
-+ struct cf_mips_dev *dev;
-+ struct resource *r;
-+ int reg_result;
-+
-+ reg_result = register_blkdev(MAJOR_NR, "cf-mips");
-+ if (reg_result < 0) {
-+ printk(KERN_WARNING "cf-mips: can't get major %d\n", MAJOR_NR);
-+ return reg_result;
-+ }
-+
-+ dev = (struct cf_mips_dev *)kmalloc(sizeof(struct cf_mips_dev),GFP_KERNEL);
-+ if (!dev)
-+ goto out_err;
-+ memset(dev, 0, sizeof(struct cf_mips_dev));
-+ cdev->dev = dev;
-+
-+ dev->pin = cdev->gpio_pin;
-+ dev->irq = platform_get_irq_byname(pdev, "cf_irq");
-+ r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "cf_membase");
-+ dev->base = (void *) r->start;
-+
-+ if (cf_init(dev)) goto out_err;
-+ printk("init done");
-+
-+ spin_lock_init(&dev->lock);
-+ dev->queue = blk_init_queue(cf_request,&dev->lock);
-+ if (!dev->queue){
-+ printk(KERN_ERR "cf-mips: no mem for queue\n");
-+ goto out_err;
-+ }
-+ blk_queue_max_sectors(dev->queue,ATA_MAX_SECT_PER_CMD);
-+
-+ /* For memory devices, it is always better to avoid crossing segments
-+ inside the same request. */
-+/* if (dev->dtype==0x848A){
-+ printk(KERN_INFO "Setting boundary for cf to 0x%x",(dev->block_size*512)-1);
-+ blk_queue_segment_boundary(dev->queue, (dev->block_size*512)-1);
-+ }*/
-+
-+ dev->gd = alloc_disk(CF_MAX_PART);
-+ cf_gendisk = dev->gd;
-+ cdev->gd = dev->gd;
-+ if (!cf_gendisk) goto out_err; /* Last of these goto's */
-+
-+ cf_gendisk->major = MAJOR_NR;
-+ cf_gendisk->first_minor = 0;
-+ cf_gendisk->queue=dev->queue;
-+ BUG_ON(cf_gendisk->minors != CF_MAX_PART);
-+ strcpy(cf_gendisk->disk_name,"cfa");
-+ cf_gendisk->fops = &cf_bdops;
-+ cf_gendisk->flags = 0 ; /* is not yet GENHD_FL_REMOVABLE */
-+ cf_gendisk->private_data=dev;
-+
-+ set_capacity(cf_gendisk,dev->sectors * CF_KERNEL_MUL);
-+
-+ /* Let the disk go live */
-+ add_disk(cf_gendisk);
-+#if 0
-+ result = cf_init();
-+
-+ /* default cfg for all partitions */
-+ memset(cf_parts, 0, sizeof (cf_parts[0]) * CF_MAX_PART);
-+ memset(cf_part_sizes, 0, sizeof (cf_part_sizes[0]) * CF_MAX_PART);
-+ for (i = 0; i < CF_MAX_PART; ++i) {
-+ cf_hsect_sizes[i] = CF_SECT_SIZE;
-+ cf_max_sectors[i] = ATA_MAX_SECT_PER_CMD;
-+ cf_blksize_sizes[i] = BLOCK_SIZE;
-+ }
-+
-+ /* setup info for whole disk (partition 0) */
-+ cf_part_sizes[0] = cf_sectors / 2;
-+ cf_parts[0].nr_sects = cf_sectors;
-+
-+ blk_size[MAJOR_NR] = cf_part_sizes;
-+ blksize_size[MAJOR_NR] = cf_blksize_sizes;
-+ max_sectors[MAJOR_NR] = cf_max_sectors;
-+ hardsect_size[MAJOR_NR] = cf_hsect_sizes;
-+ read_ahead[MAJOR_NR] = 8; /* (4kB) */
-+
-+ blk_init_queue(BLK_DEFAULT_QUEUE(MAJOR_NR), DEVICE_REQUEST);
-+
-+ add_gendisk(&cf_gendisk);
-+#endif
-+// printk(KERN_INFO "cf-mips partition check: \n");
-+// register_disk(cf_gendisk, MKDEV(MAJOR_NR, 0), CF_MAX_PART,
-+// &cf_bdops, dev->sectors);
-+ return 0;
-+
-+out_err:
-+ if (dev->queue){
-+ blk_cleanup_queue(dev->queue);
-+ }
-+ if (reg_result) {
-+ unregister_blkdev(MAJOR_NR, "cf-mips");
-+ return reg_result;
-+ }
-+ if (dev){
-+ cf_cleanup(dev);
-+ kfree(dev);
-+ }
-+ return 1;
-+}
-+
-+static int
-+cf_mips_remove(struct platform_device *pdev)
-+{
-+ struct cf_device *cdev = (struct cf_device *) pdev->dev.platform_data;
-+ struct cf_mips_dev *dev = (struct cf_mips_dev *) cdev->dev;
-+
-+ unregister_blkdev(MAJOR_NR, "cf-mips");
-+ blk_cleanup_queue(dev->queue);
-+
-+ del_gendisk(dev->gd);
-+ cf_cleanup(dev);
-+ return 0;
-+}
-+
-+
-+static struct platform_driver cf_driver = {
-+ .driver.name = "rb500-cf",
-+ .probe = cf_mips_probe,
-+ .remove = cf_mips_remove,
-+};
-+
-+static int __init cf_mips_init(void)
-+{
-+ printk(KERN_INFO "cf-mips module loaded\n");
-+ return platform_driver_register(&cf_driver);
-+}
-+
-+static void cf_mips_cleanup(void)
-+{
-+ platform_driver_unregister(&cf_driver);
-+ printk(KERN_INFO "cf-mips module removed\n");
-+}
-+
-+module_init(cf_mips_init);
-+module_exit(cf_mips_cleanup);
-+
-+MODULE_LICENSE("GPL");
-+MODULE_ALIAS_BLOCKDEV_MAJOR(CF_MIPS_MAJOR);
-+
-+
-+static int cf_open(struct inode *inode, struct file *filp)
-+{
-+ struct cf_mips_dev *dev=inode->i_bdev->bd_disk->private_data;
-+ int minor = MINOR(inode->i_rdev);
-+
-+ if (minor >= CF_MAX_PART)
-+ return -ENODEV;
-+ //DEBUGP(KERN_INFO "cf-mips module opened, minor %d\n", minor);
-+ spin_lock(&dev->lock);
-+ dev->users++;
-+ spin_unlock(&dev->lock);
-+ filp->private_data=dev;
-+
-+ /* dirty workaround to set CFRDY GPIO as an input when some other
-+ program sets it as an output */
-+ gpio_set(CFG, (1 << dev->pin), 0);
-+ return 0; /* success */
-+}
-+
-+static int cf_release(struct inode *inode, struct file *filp)
-+{
-+ int minor = MINOR(inode->i_rdev);
-+ struct cf_mips_dev *dev=inode->i_bdev->bd_disk->private_data;
-+ spin_lock(&dev->lock);
-+ dev->users--;
-+ spin_unlock(&dev->lock);
-+ return 0;
-+}
-+
-+static int cf_ioctl(struct inode *inode, struct file *filp,
-+ unsigned int cmd, unsigned long arg)
-+{
-+ unsigned minor = MINOR(inode->i_rdev);
-+ struct cf_mips_dev *dev=inode->i_bdev->bd_disk->private_data;
-+
-+ DEBUGP(KERN_INFO "cf_ioctl cmd %u\n", cmd);
-+ switch (cmd) {
-+ case BLKRRPART: /* re-read partition table */
-+ if (!capable(CAP_SYS_ADMIN))
-+ return -EACCES;
-+ printk(KERN_INFO "cf-mips partition check: \n");
-+ register_disk(dev->gd);
-+ return 0;
-+
-+ case HDIO_GETGEO:
-+ {
-+ struct hd_geometry geo;
-+ geo.cylinders = dev->cyl;
-+ geo.heads = dev->head;
-+ geo.sectors = dev->spt;
-+ geo.start = (*dev->gd->part)[minor].start_sect;
-+ if (copy_to_user((void *) arg, &geo, sizeof (geo)))
-+ return -EFAULT;
-+ }
-+ return 0;
-+ }
-+
-+ return -EINVAL; /* unknown command */
-+}
-+
-+static void cf_request(request_queue_t * q)
-+{
-+ struct cf_mips_dev* dev;
-+
-+ struct request * req;
-+ int status;
-+
-+ /* We could have q->queuedata = dev , but haven't yet. */
-+ if (active_req)
-+ return;
-+
-+ while ((req=elv_next_request(q))!=NULL){
-+ dev=req->rq_disk->private_data;
-+ status=cf_transfer(req);
-+ if (status==CF_TRANS_IN_PROGRESS){
-+ active_req=req;
-+ return;
-+ }
-+ end_request(req,status);
-+ }
-+}
-+
-+static int cf_transfer(const struct request *req)
-+{
-+ struct cf_mips_dev* dev=req->rq_disk->private_data;
-+
-+ if (!blk_fs_request(req)){
-+ if (printk_ratelimit())
-+ printk(KERN_WARNING "cf-mips: skipping non-fs request 0x%x\n",req->cmd[0]);
-+ return CF_TRANS_FAILED;
-+ }
-+
-+ return cf_do_transfer(dev,req->sector,req->current_nr_sectors,req->buffer,rq_data_dir(req));
-+}
-+
-+void cf_async_trans_done(struct cf_mips_dev * dev,int result)
-+{
-+ struct request *req;
-+
-+ spin_lock(&dev->lock);
-+ req=active_req;
-+ active_req=NULL;
-+ end_request(req,result);
-+ spin_unlock(&dev->lock);
-+
-+ spin_lock(&dev->lock);
-+ cf_request(dev->queue);
-+ spin_unlock(&dev->lock);
-+}
-+
-diff -urN linux.old/drivers/block/rb500/Makefile linux.dev/drivers/block/rb500/Makefile
---- linux.old/drivers/block/rb500/Makefile 1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/drivers/block/rb500/Makefile 2006-10-26 00:11:14.000000000 +0200
-@@ -0,0 +1,3 @@
-+## Makefile for the RB532 CF port
-+
-+obj-y += bdev.o ata.o
+++ /dev/null
-diff -urN linux.old/drivers/mtd/nand/Kconfig linux.dev/drivers/mtd/nand/Kconfig
---- linux.old/drivers/mtd/nand/Kconfig 2006-11-29 22:57:37.000000000 +0100
-+++ linux.dev/drivers/mtd/nand/Kconfig 2006-12-14 04:38:51.000000000 +0100
-@@ -75,6 +75,12 @@
- help
- Support for NAND flash on Technologic Systems TS-7250 platform.
-
-+config MTD_NAND_RB500
-+ tristate "NAND Flash device on RB500 board"
-+ depends on MTD_NAND
-+ help
-+ Support for NAND flash on RB500 platform.
-+
- config MTD_NAND_IDS
- tristate
-
-diff -urN linux.old/drivers/mtd/nand/Makefile linux.dev/drivers/mtd/nand/Makefile
---- linux.old/drivers/mtd/nand/Makefile 2006-11-29 22:57:37.000000000 +0100
-+++ linux.dev/drivers/mtd/nand/Makefile 2006-12-14 04:38:51.000000000 +0100
-@@ -9,6 +9,7 @@
- obj-$(CONFIG_MTD_NAND_SPIA) += spia.o
- obj-$(CONFIG_MTD_NAND_AMS_DELTA) += ams-delta.o
- obj-$(CONFIG_MTD_NAND_TOTO) += toto.o
-+obj-$(CONFIG_MTD_NAND_RB500) += rbmipsnand.o
- obj-$(CONFIG_MTD_NAND_AUTCPU12) += autcpu12.o
- obj-$(CONFIG_MTD_NAND_EDB7312) += edb7312.o
- obj-$(CONFIG_MTD_NAND_AU1550) += au1550nd.o
+++ /dev/null
-#
-# Copyright (C) 2006 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-define Profile/Atheros
- NAME:=Atheros WiFi (default)
- PACKAGES:=kmod-madwifi
-endef
-
-define Profile/Atheros/Description
- Package set compatible with hardware using Atheros WiFi cards
-endef
-$(eval $(call Profile,Atheros))
-
+++ /dev/null
-#
-# Copyright (C) 2006 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-define Profile/Texas
- NAME:=Texas Instruments WiFi
- PACKAGES:=kmod-acx
-endef
-
-define Profile/Texas/Description
- Package set compatible with hardware using Texas Instruments WiFi cards
-endef
-$(eval $(call Profile,Texas))
-
+++ /dev/null
-#
-# Copyright (C) 2006 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-define Profile/None
- NAME:=No WiFi
- PACKAGES:=
-endef
-
-define Profile/None/Description
- Package set without WiFi support
-endef
-$(eval $(call Profile,None))
-
projects / openwrt / staging / wigyori.git / commitdiff