+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-/dts-v1/;
-
-#include "ipq8074.dtsi"
-#include "ipq8074-hk-cpu.dtsi"
-#include "ipq8074-ess.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/leds/common.h>
-
-/ {
- model = "prpl Foundation Haze";
- compatible = "prpl,haze", "qcom,ipq8074";
-
- aliases {
- serial0 = &blsp1_uart5;
- /* Aliases are required by U-Boot to patch MAC addresses */
- ethernet0 = &dp6_syn;
- ethernet1 = &dp4;
- ethernet2 = &dp3;
- ethernet3 = &dp2;
- label-mac-device = &dp6_syn;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- keys {
- compatible = "gpio-keys";
- pinctrl-0 = <&button_pins>;
- pinctrl-names = "default";
-
- wps-button {
- label = "wps";
- gpios = <&tlmm 42 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
-
- reset-button {
- label = "reset";
- gpios = <&tlmm 44 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-};
-
-&tlmm {
- mdio_pins: mdio-state {
- mdc-pins {
- pins = "gpio68";
- function = "mdc";
- drive-strength = <8>;
- bias-pull-up;
- };
-
- mdio-pins {
- pins = "gpio69";
- function = "mdio";
- drive-strength = <8>;
- bias-pull-up;
- };
- };
-
- button_pins: button-state {
- wps-pins {
- pins = "gpio42";
- function = "gpio";
- drive-strength = <8>;
- bias-pull-up;
- };
-
- rst-pins {
- pins = "gpio44";
- function = "gpio";
- drive-strength = <8>;
- bias-pull-up;
- };
- };
-};
-
-&blsp1_uart5 {
- status = "okay";
-};
-
-&prng {
- status = "okay";
-};
-
-&ssphy_0 {
- status = "okay";
-};
-
-&qusb_phy_0 {
- status = "okay";
-};
-
-&ssphy_1 {
- status = "okay";
-};
-
-&qusb_phy_1 {
- status = "okay";
-};
-
-&usb_0 {
- status = "okay";
-};
-
-&usb_1 {
- status = "okay";
-};
-
-&cryptobam {
- status = "okay";
-};
-
-&crypto {
- status = "okay";
-};
-
-&qpic_bam {
- status = "okay";
-};
-
-&blsp1_spi1 { /* BLSP1 QUP1 */
- pinctrl-0 = <&spi_0_pins>;
- pinctrl-names = "default";
- cs-gpios = <0>;
- status = "okay";
-
- flash@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0>;
- compatible = "jedec,spi-nor";
- spi-max-frequency = <50000000>;
-
- partitions {
- compatible = "qcom,smem-part";
- };
- };
-};
-
-&mdio {
- status = "okay";
-
- pinctrl-0 = <&mdio_pins>;
- pinctrl-names = "default";
- reset-gpios = <&tlmm 22 GPIO_ACTIVE_LOW>;
-
- qca8075_1: ethernet-phy@0 {
- compatible = "ethernet-phy-ieee802.3-c22";
- reg = <0>;
- };
-
- qca8075_2: ethernet-phy@1 {
- compatible = "ethernet-phy-ieee802.3-c22";
- reg = <1>;
- };
-
- qca8075_3: ethernet-phy@2 {
- compatible = "ethernet-phy-ieee802.3-c22";
- reg = <2>;
- };
-
- qca8075_4: ethernet-phy@3 {
- compatible = "ethernet-phy-ieee802.3-c22";
- reg = <3>;
- };
-
- aqr113c: ethernet-phy@5 {
- compatible ="ethernet-phy-ieee802.3-c45";
- reg = <8>;
- reset-gpios = <&tlmm 43 GPIO_ACTIVE_LOW>;
- };
-};
-
-&sdhc_1 {
- status = "okay";
-
- mmc-hs400-1_8v;
- mmc-hs200-1_8v;
- mmc-ddr-1_8v;
- vqmmc-supply = <&l11>;
-};
-
-&switch {
- status = "okay";
-
- switch_cpu_bmp = <0x1>; /* cpu port bitmap */
- switch_lan_bmp = <0x1e>; /* lan port bitmap */
- switch_wan_bmp = <0x60>; /* wan port bitmap */
- switch_mac_mode = <0x0>; /* mac mode for uniphy instance0*/
- switch_mac_mode1 = <0xe>; /* mac mode for uniphy instance1*/
- switch_mac_mode2 = <0xd>; /* mac mode for uniphy instance2*/
- bm_tick_mode = <0>; /* bm tick mode */
- tm_tick_mode = <0>; /* tm tick mode */
-
- qcom,port_phyinfo {
- port@0 {
- port_id = <1>;
- phy_address = <0>;
- };
- port@1 {
- port_id = <2>;
- phy_address = <1>;
- };
- port@2 {
- port_id = <3>;
- phy_address = <2>;
- };
- port@3 {
- port_id = <4>;
- phy_address = <3>;
- };
- port@4 {
- port_id = <6>;
- phy_address = <8>;
- compatible = "ethernet-phy-ieee802.3-c45";
- ethernet-phy-ieee802.3-c45;
- };
- };
-};
-
-&edma {
- status = "okay";
-};
-
-/* Dummy LAN port */
-&dp1 {
- status = "disabled";
- phy-handle = <&qca8075_1>;
- label = "lan4";
-};
-
-&dp2 {
- status = "okay";
- phy-handle = <&qca8075_2>;
- label = "lan3";
-};
-
-&dp3 {
- status = "okay";
- phy-handle = <&qca8075_3>;
- label = "lan2";
-};
-
-&dp4 {
- status = "okay";
- phy-handle = <&qca8075_4>;
- label = "lan1";
-};
-
-&dp6_syn {
- status = "okay";
- qcom,mactype = <1>;
- phy-handle = <&aqr113c>;
- label = "wan";
-};
-
-&pcie_qmp0 {
- status = "okay";
-};
-
-&pcie0 {
- status = "okay";
-
- perst-gpio = <&tlmm 58 GPIO_ACTIVE_LOW>;
-
- bridge@0,0 {
- reg = <0x00020000 0 0 0 0>;
- #address-cells = <3>;
- #size-cells = <2>;
- ranges;
- };
-};
-
-&pcie_qmp1 {
- status = "okay";
-};
-
-&pcie1 {
- status = "okay";
-
- perst-gpio = <&tlmm 61 GPIO_ACTIVE_LOW>;
-
- bridge@1,0 {
- reg = <0x00010000 0 0 0 0>;
- #address-cells = <3>;
- #size-cells = <2>;
- ranges;
-
- wifi@1,0 {
- status = "okay";
-
- /* ath11k has no DT compatible for PCI cards */
- compatible = "pci17cb,1104";
- reg = <0x00010000 0 0 0 0>;
-
- qcom,ath11k-calibration-variant = "prpl-Haze";
- };
- };
-};
-
-&wifi {
- status = "okay";
-
- qcom,ath11k-calibration-variant = "prpl-Haze";
-};
projects / openwrt / staging / nbd.git / commitdiff