ASoC: Intel: bytcr_rt5640: Use device properties for setting up dmic

Use device-properties for setting up the dmic, based on the
BYT_RT5640_MAP() value, instead of using the codec specific
rt5640_dmic_enable() function for this.  This also removes the need
for the BYT_RT5640_DMIC_EN quirk, which was always set together with
a MAP() quirk of DMIC1_MAP or DMIC2_MAP.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

diff --git a/sound/soc/intel/boards/bytcr_rt5640.c b/sound/soc/intel/boards/bytcr_rt5640.c
index fe46f3b2aeccc4b7dac53a42c598f00a7e679beb..cc607cfeda56de01f85470737950bb970fdf6a6c 100644 (file)
--- a/sound/soc/intel/boards/bytcr_rt5640.c
+++ b/sound/soc/intel/boards/bytcr_rt5640.c
@@ -34,6 +34,7 @@
 #include <sound/soc.h>
 #include <sound/jack.h>
 #include <sound/soc-acpi.h>
+#include <dt-bindings/sound/rt5640.h>
 #include "../../codecs/rt5640.h"
 #include "../atom/sst-atom-controls.h"
 #include "../common/sst-dsp.h"
@@ -46,7 +47,6 @@ enum {
 };
 
 #define BYT_RT5640_MAP(quirk)  ((quirk) &  GENMASK(7, 0))
-#define BYT_RT5640_DMIC_EN     BIT(16)
 #define BYT_RT5640_MONO_SPEAKER BIT(17)
 #define BYT_RT5640_DIFF_MIC     BIT(18) /* defaut is single-ended */
 #define BYT_RT5640_SSP2_AIF2    BIT(19) /* default is using AIF1  */
@@ -55,7 +55,7 @@ enum {
 #define BYT_RT5640_MCLK_EN     BIT(22)
 #define BYT_RT5640_MCLK_25MHZ  BIT(23)
 
-/* in-diff + terminating empty entry */
+/* in-diff or dmic-pin + terminating empty entry */
 #define MAX_NO_PROPS 2
 
 struct byt_rt5640_private {
@@ -71,7 +71,6 @@ MODULE_PARM_DESC(quirk, "Board-specific quirk override");
 static void log_quirks(struct device *dev)
 {
        int map;
-       bool has_dmic = false;
        bool has_mclk = false;
        bool has_ssp0 = false;
        bool has_ssp0_aif1 = false;
@@ -82,11 +81,9 @@ static void log_quirks(struct device *dev)
        switch (map) {
        case BYT_RT5640_DMIC1_MAP:
                dev_info(dev, "quirk DMIC1_MAP enabled\n");
-               has_dmic = true;
                break;
        case BYT_RT5640_DMIC2_MAP:
                dev_info(dev, "quirk DMIC2_MAP enabled\n");
-               has_dmic = true;
                break;
        case BYT_RT5640_IN1_MAP:
                dev_info(dev, "quirk IN1_MAP enabled\n");
@@ -98,20 +95,10 @@ static void log_quirks(struct device *dev)
                dev_err(dev, "quirk map 0x%x is not supported, microphone input will not work\n", map);
                break;
        }
-       if (byt_rt5640_quirk & BYT_RT5640_DMIC_EN) {
-               if (has_dmic)
-                       dev_info(dev, "quirk DMIC enabled\n");
-               else
-                       dev_err(dev, "quirk DMIC enabled but no DMIC input set, will be ignored\n");
-       }
        if (byt_rt5640_quirk & BYT_RT5640_MONO_SPEAKER)
                dev_info(dev, "quirk MONO_SPEAKER enabled\n");
-       if (byt_rt5640_quirk & BYT_RT5640_DIFF_MIC) {
-               if (!has_dmic)
-                       dev_info(dev, "quirk DIFF_MIC enabled\n");
-               else
-                       dev_info(dev, "quirk DIFF_MIC enabled but DMIC input selected, will be ignored\n");
-       }
+       if (byt_rt5640_quirk & BYT_RT5640_DIFF_MIC)
+               dev_info(dev, "quirk DIFF_MIC enabled\n");
        if (byt_rt5640_quirk & BYT_RT5640_SSP0_AIF1) {
                dev_info(dev, "quirk SSP0_AIF1 enabled\n");
                has_ssp0 = true;
@@ -387,7 +374,6 @@ static const struct dmi_system_id byt_rt5640_quirk_table[] = {
                        DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Venue 8 Pro 5830"),
                },
                .driver_data = (void *)(BYT_RT5640_DMIC2_MAP |
-                                       BYT_RT5640_DMIC_EN |
                                        BYT_RT5640_MCLK_EN),
        },
        {
@@ -405,8 +391,7 @@ static const struct dmi_system_id byt_rt5640_quirk_table[] = {
                        DMI_MATCH(DMI_SYS_VENDOR, "Circuitco"),
                        DMI_MATCH(DMI_PRODUCT_NAME, "Minnowboard Max B3 PLATFORM"),
                },
-               .driver_data = (void *)(BYT_RT5640_DMIC1_MAP |
-                                       BYT_RT5640_DMIC_EN),
+               .driver_data = (void *)(BYT_RT5640_DMIC1_MAP),
        },
        {
                .callback = byt_rt5640_quirk_cb,
@@ -457,6 +442,14 @@ static int byt_rt5640_add_codec_device_props(const char *i2c_dev_name)
                return -EPROBE_DEFER;
 
        switch (BYT_RT5640_MAP(byt_rt5640_quirk)) {
+       case BYT_RT5640_DMIC1_MAP:
+               props[cnt++] = PROPERTY_ENTRY_U32("realtek,dmic1-data-pin",
+                                                 RT5640_DMIC1_DATA_PIN_IN1P);
+               break;
+       case BYT_RT5640_DMIC2_MAP:
+               props[cnt++] = PROPERTY_ENTRY_U32("realtek,dmic2-data-pin",
+                                                 RT5640_DMIC2_DATA_PIN_IN1N);
+               break;
        case BYT_RT5640_IN1_MAP:
                if (byt_rt5640_quirk & BYT_RT5640_DIFF_MIC)
                        props[cnt++] =
@@ -556,12 +549,6 @@ static int byt_rt5640_init(struct snd_soc_pcm_runtime *runtime)
        if (ret)
                return ret;
 
-       if (byt_rt5640_quirk & BYT_RT5640_DMIC_EN) {
-               ret = rt5640_dmic_enable(component, 0, 0);
-               if (ret)
-                       return ret;
-       }
-
        snd_soc_dapm_ignore_suspend(&card->dapm, "Headphone");
        snd_soc_dapm_ignore_suspend(&card->dapm, "Speaker");
 
@@ -862,8 +849,7 @@ static int snd_byt_rt5640_mc_probe(struct platform_device *pdev)
                byt_rt5640_quirk |= BYT_RT5640_IN1_MAP;
                byt_rt5640_quirk |= BYT_RT5640_DIFF_MIC;
        } else {
-               byt_rt5640_quirk |= (BYT_RT5640_DMIC1_MAP |
-                               BYT_RT5640_DMIC_EN);
+               byt_rt5640_quirk |= BYT_RT5640_DMIC1_MAP;
        }
 
        /* check quirks before creating card */