MIPS: SEAD3: Use generic plat_irq_dispatch

The generic plat_irq_dispatch provided in irq_cpu.c is sufficient for
dispatching interrupts on SEAD-3 in legacy and vectored interrupt modes.

Signed-off-by: Andrew Bresticker <abrestic@chromium.org>
Reviewed-by: Qais Yousef <qais.yousef@imgtec.com>
Tested-by: Qais Yousef <qais.yousef@imgtec.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jeffrey Deans <jeffrey.deans@imgtec.com>
Cc: Markos Chandras <markos.chandras@imgtec.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Jonas Gorski <jogo@openwrt.org>
Cc: John Crispin <blogic@openwrt.org>
Cc: David Daney <ddaney.cavm@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/7822/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

diff --git a/arch/mips/mti-sead3/sead3-int.c b/arch/mips/mti-sead3/sead3-int.c
index cb06cd954a137ba63b238a75fb45a72b1d7e4222..69ae185a76c533d513a5670e5787d26b2742528c 100644 (file)
--- a/arch/mips/mti-sead3/sead3-int.c
+++ b/arch/mips/mti-sead3/sead3-int.c
@@ -22,32 +22,11 @@
 
 static unsigned long sead3_config_reg;
 
-asmlinkage void plat_irq_dispatch(void)
-{
-       unsigned int pending = read_c0_cause() & read_c0_status() & ST0_IM;
-       int irq;
-
-       irq = (fls(pending) - CAUSEB_IP - 1);
-       if (irq >= 0)
-               do_IRQ(MIPS_CPU_IRQ_BASE + irq);
-       else
-               spurious_interrupt();
-}
-
 void __init arch_init_irq(void)
 {
-       int i;
-
-       if (!cpu_has_veic) {
+       if (!cpu_has_veic)
                mips_cpu_irq_init();
 
-               if (cpu_has_vint) {
-                       /* install generic handler */
-                       for (i = 0; i < 8; i++)
-                               set_vi_handler(i, plat_irq_dispatch);
-               }
-       }
-
        sead3_config_reg = (unsigned long)ioremap_nocache(SEAD_CONFIG_BASE,
                SEAD_CONFIG_SIZE);
        gic_present = (REG32(sead3_config_reg) & SEAD_CONFIG_GIC_PRESENT_MSK) >>