ramips: make pinctrl work on newer socs

newer socs have 2 mux registers

Signed-off-by: John Crispin <blogic@openwrt.org>
Backport of r46952

SVN-Revision: 47088

diff --git a/target/linux/ramips/patches-3.18/0030-pinctrl-ralink-add-pinctrl-driver.patch b/target/linux/ramips/patches-3.18/0030-pinctrl-ralink-add-pinctrl-driver.patch
index fcc66ff007132187abee656afa9e98aaf3cfe018..c50384cfcca9967a4258974abd04a5e6a9706f91 100644 (file)
--- a/target/linux/ramips/patches-3.18/0030-pinctrl-ralink-add-pinctrl-driver.patch
+++ b/target/linux/ramips/patches-3.18/0030-pinctrl-ralink-add-pinctrl-driver.patch
@@ -24,7 +24,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
 
 --- a/arch/mips/Kconfig
 +++ b/arch/mips/Kconfig
-@@ -453,6 +453,8 @@ config RALINK
+@@ -453,6 +453,8 @@
        select CLKDEV_LOOKUP
        select ARCH_HAS_RESET_CONTROLLER
        select RESET_CONTROLLER
@@ -35,7 +35,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
        bool "SGI IP22 (Indy/Indigo2)"
 --- a/arch/mips/include/asm/mach-ralink/mt7620.h
 +++ b/arch/mips/include/asm/mach-ralink/mt7620.h
-@@ -90,7 +90,6 @@ enum mt762x_soc_type {
+@@ -90,7 +90,6 @@
  #define MT7620_DDR2_SIZE_MIN          32
  #define MT7620_DDR2_SIZE_MAX          256
  
@@ -43,7 +43,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  #define MT7620_GPIO_MODE_UART0_SHIFT  2
  #define MT7620_GPIO_MODE_UART0_MASK   0x7
  #define MT7620_GPIO_MODE_UART0(x)     ((x) << MT7620_GPIO_MODE_UART0_SHIFT)
-@@ -102,16 +101,36 @@ enum mt762x_soc_type {
+@@ -102,16 +101,36 @@
  #define MT7620_GPIO_MODE_GPIO_UARTF   0x5
  #define MT7620_GPIO_MODE_GPIO_I2S     0x6
  #define MT7620_GPIO_MODE_GPIO         0x7
@@ -148,7 +148,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
 +#endif
 --- a/arch/mips/include/asm/mach-ralink/rt305x.h
 +++ b/arch/mips/include/asm/mach-ralink/rt305x.h
-@@ -125,24 +125,29 @@ static inline int soc_is_rt5350(void)
+@@ -125,24 +125,29 @@
  #define RT305X_GPIO_GE0_TXD0          40
  #define RT305X_GPIO_GE0_RXCLK         51
  
@@ -263,7 +263,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  
  #include "common.h"
  
-@@ -47,118 +48,58 @@ enum mt762x_soc_type mt762x_soc;
+@@ -47,118 +48,58 @@
  /* does the board have sdram or ddram */
  static int dram_type;
  
@@ -498,7 +498,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  };
  
  static void rt288x_wdt_reset(void)
-@@ -69,11 +50,6 @@ static void rt288x_wdt_reset(void)
+@@ -69,11 +50,6 @@
        rt_sysc_w32(t, SYSC_REG_CLKCFG);
  }
  
@@ -510,7 +510,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  void __init ralink_clk_init(void)
  {
        unsigned long cpu_rate, wmac_rate = 40000000;
-@@ -141,4 +117,6 @@ void prom_soc_init(struct ralink_soc_inf
+@@ -141,4 +117,6 @@
        soc_info->mem_base = RT2880_SDRAM_BASE;
        soc_info->mem_size_min = RT2880_MEM_SIZE_MIN;
        soc_info->mem_size_max = RT2880_MEM_SIZE_MAX;
@@ -673,7 +673,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  };
  
  static void rt305x_wdt_reset(void)
-@@ -114,14 +100,6 @@ static void rt305x_wdt_reset(void)
+@@ -114,14 +100,6 @@
        rt_sysc_w32(t, SYSC_REG_SYSTEM_CONFIG);
  }
  
@@ -688,7 +688,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  static unsigned long rt5350_get_mem_size(void)
  {
        void __iomem *sysc = (void __iomem *) KSEG1ADDR(RT305X_SYSC_BASE);
-@@ -290,11 +268,14 @@ void prom_soc_init(struct ralink_soc_inf
+@@ -290,11 +268,14 @@
        soc_info->mem_base = RT305X_SDRAM_BASE;
        if (soc_is_rt5350()) {
                soc_info->mem_size = rt5350_get_mem_size();
@@ -876,7 +876,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  };
  
  static void rt3883_wdt_reset(void)
-@@ -155,17 +73,6 @@ static void rt3883_wdt_reset(void)
+@@ -155,17 +73,6 @@
        rt_sysc_w32(t, RT3883_SYSC_REG_SYSCFG1);
  }
  
@@ -894,7 +894,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  void __init ralink_clk_init(void)
  {
        unsigned long cpu_rate, sys_rate;
-@@ -244,4 +151,6 @@ void prom_soc_init(struct ralink_soc_inf
+@@ -244,4 +151,6 @@
        soc_info->mem_base = RT3883_SDRAM_BASE;
        soc_info->mem_size_min = RT3883_MEM_SIZE_MIN;
        soc_info->mem_size_max = RT3883_MEM_SIZE_MAX;
@@ -903,7 +903,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  }
 --- a/drivers/pinctrl/Kconfig
 +++ b/drivers/pinctrl/Kconfig
-@@ -103,6 +103,11 @@ config PINCTRL_LANTIQ
+@@ -103,6 +103,11 @@
        select PINMUX
        select PINCONF
  
@@ -917,7 +917,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
        depends on SOC_FALCON
 --- a/drivers/pinctrl/Makefile
 +++ b/drivers/pinctrl/Makefile
-@@ -20,6 +20,7 @@ obj-$(CONFIG_PINCTRL_BCM281XX)       += pinctr
+@@ -20,6 +20,7 @@
  obj-$(CONFIG_PINCTRL_FALCON)  += pinctrl-falcon.o
  obj-$(CONFIG_PINCTRL_PALMAS)  += pinctrl-palmas.o
  obj-$(CONFIG_PINCTRL_ROCKCHIP)        += pinctrl-rockchip.o
@@ -927,7 +927,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  obj-$(CONFIG_PINCTRL_TEGRA)   += pinctrl-tegra.o
 --- /dev/null
 +++ b/drivers/pinctrl/pinctrl-rt2880.c
-@@ -0,0 +1,467 @@
+@@ -0,0 +1,474 @@
 +/*
 + *  linux/drivers/pinctrl/pinctrl-rt2880.c
 + *
@@ -957,6 +957,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
 +#include "core.h"
 +
 +#define SYSC_REG_GPIO_MODE    0x60
++#define SYSC_REG_GPIO_MODE2   0x64
 +
 +struct rt2880_priv {
 +      struct device *dev;
@@ -1134,7 +1135,9 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
 +{
 +      struct rt2880_priv *p = pinctrl_dev_get_drvdata(pctrldev);
 +        u32 mode = 0;
++      u32 reg = SYSC_REG_GPIO_MODE;
 +      int i;
++      int shift;
 +
 +      /* dont allow double use */
 +      if (p->groups[group].enabled) {
@@ -1145,8 +1148,13 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
 +      p->groups[group].enabled = 1;
 +      p->func[func]->enabled = 1;
 +
-+      mode = rt_sysc_r32(SYSC_REG_GPIO_MODE);
-+      mode &= ~(p->groups[group].mask << p->groups[group].shift);
++      shift = p->groups[group].shift;
++      if (shift >= 32) {
++              shift -= 32;
++              reg = SYSC_REG_GPIO_MODE2;
++      }
++      mode = rt_sysc_r32(reg);
++      mode &= ~(p->groups[group].mask << shift);
 +
 +      /* mark the pins as gpio */
 +      for (i = 0; i < p->groups[group].func[0].pin_count; i++)
@@ -1154,14 +1162,13 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
 +
 +      /* function 0 is gpio and needs special handling */
 +      if (func == 0) {
-+              mode |= p->groups[group].gpio << p->groups[group].shift;
++              mode |= p->groups[group].gpio << shift;
 +      } else {
 +              for (i = 0; i < p->func[func]->pin_count; i++)
 +                      p->gpio[p->func[func]->pins[i]] = 0;
-+              mode |= p->func[func]->value << p->groups[group].shift;
++              mode |= p->func[func]->value << shift;
 +      }
-+      rt_sysc_w32(mode, SYSC_REG_GPIO_MODE);
-+
++      rt_sysc_w32(mode, reg);
 +
 +      return 0;
 +}