fdtaddr=0x8f000000
loadaddr=0x81000000
-fdt_high=0xffffffffffffffff
+fdt_high=0x8fffffff
initrd_high=0xffffffffffffffff
-sd_boot=mmc read $fdtaddr 7800 800;mmc read $loadaddr 8000 8000;bootm $loadaddr - $fdtaddr
-bootargs=root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 noinitrd earlycon=uart8250,mmio,0x21c0500 console=ttyS0,115200
+sd_boot=ext4load mmc 0:1 $loadaddr fitImage;bootm $loadaddr
+bootargs=root=/dev/mmcblk0p2 rw rootwait rootfstype=squashfs,f2fs noinitrd earlycon=uart8250,mmio,0x21c0500 console=ttyS0,115200
bootcmd=echo starting openwrt ...;pfe stop;run sd_boot
bootdelay=3
fdtaddr=0x8f000000
loadaddr=0x81000000
-fdt_high=0xffffffff
+fdt_high=0x8fffffff
initrd_high=0xffffffff
-sd_boot=mmc read ${fdtaddr} 7800 800;mmc read ${loadaddr} 8000 8000;bootm ${loadaddr} - ${fdtaddr}
-bootargs=root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 noinitrd earlycon=uart8250,mmio,0x21c0500 console=ttyS0,115200
+sd_boot=ext4load mmc 0:1 $loadaddr fitImage;bootm $loadaddr
+bootargs=root=/dev/mmcblk0p2 rw rootwait rootfstype=squashfs,f2fs noinitrd earlycon=uart8250,mmio,0x21c0500 console=ttyS0,115200
bootcmd=echo starting openwrt ...;run sd_boot
bootdelay=3
fdtaddr=0x8f000000
loadaddr=0x81000000
-fdt_high=0xffffffff
+fdt_high=0x8fffffff
initrd_high=0xffffffff
-sd_boot=mmc read $fdtaddr 7800 800;mmc read $loadaddr 8000 8000;bootm $loadaddr - $fdtaddr
-bootargs=root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 noinitrd earlycon=uart8250,mmio,0x21c0500 console=ttyS0,115200 cma=64M@0x0-0xb0000000
+sd_boot=ext4load mmc 0:1 $loadaddr fitImage;bootm $loadaddr
+bootargs=root=/dev/mmcblk0p2 rw rootwait rootfstype=squashfs,f2fs noinitrd earlycon=uart8250,mmio,0x21c0500 console=ttyS0,115200
bootcmd=echo starting openwrt ...;run sd_boot
bootdelay=3
fdtaddr=0x8f000000
loadaddr=0x81000000
-fdt_high=0xffffffffffffffff
+fdt_high=0x8fffffff
initrd_high=0xffffffffffffffff
hwconfig=fsl_ddr:bank_intlv=auto
-sd_boot=mmc read $fdtaddr 7800 800;mmc read $loadaddr 8000 8000;bootm $loadaddr - $fdtaddr
-bootargs=root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 noinitrd earlycon=uart8250,mmio,0x21c0500 console=ttyS0,115200
+sd_boot=ext4load mmc 0:1 $loadaddr fitImage;bootm $loadaddr
+bootargs=root=/dev/mmcblk0p2 rw rootwait rootfstype=squashfs,f2fs noinitrd earlycon=uart8250,mmio,0x21c0500 console=ttyS0,115200
bootcmd=echo starting openwrt ...;run sd_boot
bootdelay=3
fdtaddr=0x8f000000
loadaddr=0x81000000
-fdt_high=0xffffffffffffffff
+fdt_high=0x8fffffff
initrd_high=0xffffffffffffffff
hwconfig=fsl_ddr:bank_intlv=auto
-sd_boot=mmc read $fdtaddr 7800 800;mmc read $loadaddr 8000 8000;bootm $loadaddr - $fdtaddr
-bootargs=root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 noinitrd earlycon=uart8250,mmio,0x21c0500 console=ttyS0,115200
+sd_boot=ext4load mmc 0:1 $loadaddr fitImage;bootm $loadaddr
+bootargs=root=/dev/mmcblk0p2 rw rootwait rootfstype=squashfs,f2fs noinitrd earlycon=uart8250,mmio,0x21c0500 console=ttyS0,115200
bootcmd=echo starting openwrt ...;run sd_boot
bootdelay=3
initrd_high=0xffffffffffffffff
hwconfig=fsl_ddr:bank_intlv=auto
mc_init=mmc read 80000000 5000 1800;mmc read 80300000 7000 800;fsl_mc start mc 80000000 80300000;mmc read 80400000 6800 800;fsl_mc apply dpl 80400000
-sd_boot=mmc read $fdtaddr 7800 800;mmc read $loadaddr 8000 8000;bootm $loadaddr - $fdtaddr
-bootargs=root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 noinitrd earlycon=uart8250,mmio,0x21c0500 console=ttyS0,115200
+sd_boot=ext4load mmc 0:1 $loadaddr fitImage;bootm $loadaddr
+bootargs=root=/dev/mmcblk0p2 rw rootwait rootfstype=squashfs,f2fs noinitrd earlycon=uart8250,mmio,0x21c0500 console=ttyS0,115200
bootcmd=echo starting openwrt ...;run mc_init;run sd_boot
bootdelay=3
BOARD:=layerscape
BOARDNAME:=NXP Layerscape
KERNEL_PATCHVER:=5.4
-FEATURES:=squashfs nand usb pcie gpio fpu ubifs ext4
+FEATURES:=squashfs nand usb pcie gpio fpu ubifs ext4 rootfs-part boot-part
SUBTARGETS:=armv8_64b armv7
define Target/Description
include $(INCLUDE_DIR)/target.mk
DEFAULT_PACKAGES += kmod-usb3 kmod-usb-dwc3 kmod-usb-storage \
- partx-utils
+ mkf2fs e2fsprogs partx-utils
$(eval $(call BuildTarget))
* Final firmware/image
Path: bin/targets/layerscape/<subtarget>/
Firmware for flash: openwrt-layerscape-<subtarget>-<device>-<rootfs>-firmware.bin
- Image for SD card: openwrt-layerscape-<subtarget>-<device>-<rootfs>-sdcard.img
+ Image for SD card: openwrt-layerscape-<subtarget>-<device>-<rootfs>-sdcard.img.gz
+ Sysupgrade images: openwrt-layerscape-<subtarget>-<device>-<rootfs>-sysupgrade.bin
3. Program NOR/QSPI flash or SD card
------------------------------------
-The firmware.bin or sdcard.img is an all-in-one image including all things for
-OpenWrt staring up. (except LS1012AFRWY. Refer to 3.3.)
+The firmware.bin or sdcard.img (after extract from gz) is an all-in-one image including all
+things for OpenWrt staring up. (except LS1012AFRWY. Refer to 3.3.)
If you want to install all things into flash, please use firmware.bin.
If you want to install all things into SD card, please use sdcard.img.
---------------------------------
sdcard.img could be programmed to SD card in either u-boot environment
or linux environment. After programming, configure the board to boot
-from SD card.
+from SD card. (sdcard.img images are gz-iped to save space. Please extract them first.)
* u-boot environment
CONFIG_EXT4_FS=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
+CONFIG_F2FS_FS=y
+CONFIG_F2FS_FS_XATTR=y
+CONFIG_F2FS_STAT_FS=y
CONFIG_FAILOVER=y
CONFIG_FAT_FS=y
# CONFIG_FEC is not set
CONFIG_EXT4_FS_SECURITY=y
CONFIG_EXTCON=y
CONFIG_EXTCON_USB_GPIO=y
+CONFIG_F2FS_FS=y
+CONFIG_F2FS_FS_XATTR=y
+CONFIG_F2FS_STAT_FS=y
CONFIG_FAILOVER=y
CONFIG_FANOTIFY=y
CONFIG_FAT_FS=y
. /lib/functions.sh
case "$(board_name)" in
+ fsl,ls1012a-frwy-sdboot | \
fsl,ls1012a-rdb | \
+ fsl,ls1021a-iot-sdboot | \
fsl,ls1021a-twr | \
+ fsl,ls1021a-twr-sdboot | \
fsl,ls1043a-rdb | \
+ fsl,ls1043a-rdb-sdboot | \
fsl,ls1046a-rdb | \
+ fsl,ls1046a-rdb-sdboot | \
fsl,ls1088a-rdb | \
+ fsl,ls1088a-rdb-sdboot | \
fsl,ls2088a-rdb)
uci set system.@system[0].compat_version="2.0"
uci commit system
--- /dev/null
+. /lib/functions.sh
+. /lib/upgrade/common.sh
+
+BOOTPART=/dev/mmcblk0p1
+
+move_config() {
+ local board=$(board_name)
+
+ case "$board" in
+ fsl,ls1012a-frwy-sdboot | \
+ fsl,ls1021a-iot-sdboot | \
+ fsl,ls1021a-twr-sdboot | \
+ fsl,ls1043a-rdb-sdboot | \
+ fsl,ls1046a-rdb-sdboot | \
+ fsl,ls1088a-rdb-sdboot)
+ if [ -b $BOOTPART ]; then
+ mkdir -p /boot
+ mount -t ext4 -o rw,noatime $BOOTPART /boot 2>&1
+ [ -f "/boot/$BACKUP_FILE" ] && mv -f "/boot/$BACKUP_FILE" /
+ umount /boot
+ fi
+ ;;
+ esac
+}
+
+boot_hook_add preinit_mount_root move_config
REQUIRE_IMAGE_METADATA=1
-platform_check_image_sdboot() {
- local diskdev partdev diff
-
- export_bootdevice && export_partdevice diskdev 0 || {
- echo "Unable to determine upgrade device"
- return 1
- }
-
- # get partitions table from boot device
- get_partitions "/dev/$diskdev" bootdisk
-
- # get partitions table from sysupgrade.bin
- dd if="$1" of=/tmp/image.bs bs=512b count=1 > /dev/null 2>&1
- sync
- get_partitions /tmp/image.bs image
-
- # compare tables
- diff="$(grep -F -x -v -f /tmp/partmap.bootdisk /tmp/partmap.image)"
-
- rm -f /tmp/image.bs /tmp/partmap.bootdisk /tmp/partmap.image
-
- if [ -n "$diff" ]; then
- echo "Partition layout has changed. Full image will be written."
- ask_bool 0 "Abort" && exit 1
- return 0
- fi
-}
platform_do_upgrade_sdboot() {
- local diskdev partdev diff
+ local diskdev partdev parttype=ext4
+ local tar_file="$1"
+ local board_dir=$(tar tf $tar_file | grep -m 1 '^sysupgrade-.*/$')
+ board_dir=${board_dir%/}
export_bootdevice && export_partdevice diskdev 0 || {
echo "Unable to determine upgrade device"
return 1
}
- if [ "$UPGRADE_OPT_SAVE_PARTITIONS" = "1" ]; then
- # get partitions table from boot device
- get_partitions "/dev/$diskdev" bootdisk
-
- # get partitions table from sysupgrade.bin
- dd if="$1" of=/tmp/image.bs bs=512b count=1 > /dev/null 2>&1
- sync
- get_partitions /tmp/image.bs image
-
- # compare tables
- diff="$(grep -F -x -v -f /tmp/partmap.bootdisk /tmp/partmap.image)"
- else
- diff=1
- fi
-
- if [ -n "$diff" ]; then
- dd if="$1" of="/dev/$diskdev" bs=1024 count=4 > /dev/null 2>&1
- echo "Writing image to /dev/$diskdev..."
- dd if="$1" of="/dev/$diskdev" bs=1024 skip=15360 seek=15360 > /dev/null 2>&1
- sync
-
- # Separate removal and addtion is necessary; otherwise, partition 1
- # will be missing if it overlaps with the old partition 2
- partx -d - "/dev/$diskdev"
- partx -a - "/dev/$diskdev"
-
- return 0
+ if export_partdevice partdev 1; then
+ mount -t $parttype -o rw,noatime "/dev/$partdev" /mnt 2>&1
+ echo "Writing kernel..."
+ tar xf $tar_file ${board_dir}/kernel -O > /mnt/fitImage
+ umount /mnt
fi
- # write dtb
- echo "Writing dtb to /dev/$diskdev..."
- dd if="$1" of="/dev/$diskdev" bs=1024 skip=15360 seek=15360 count=1024 > /dev/null 2>&1
- # write kernel image
- echo "Writing kernel to /dev/$diskdev..."
- dd if="$1" of="/dev/$diskdev" bs=1024 skip=16384 seek=16384 count=16384 > /dev/null 2>&1
- sync
-
- # iterate over each partition from the image and write it to the boot disk
- while read part start size; do
- if export_partdevice partdev $part; then
- echo "Writing image to /dev/$partdev..."
- dd if="$1" of="/dev/$partdev" bs=512 skip="$start" count="$size" > /dev/null 2>&1
- sync
- else
- echo "Unable to find partition $part device, skipped."
- fi
- done < /tmp/partmap.image
+ echo "Erasing rootfs..."
+ dd if=/dev/zero of=/dev/mmcblk0p2 bs=1M > /dev/null 2>&1
+ echo "Writing rootfs..."
+ tar xf $tar_file ${board_dir}/root -O | dd of=/dev/mmcblk0p2 bs=512k > /dev/null 2>&1
}
platform_do_upgrade_traverse_nandubi() {
if export_partdevice partdev 1; then
mount -t $parttype -o rw,noatime "/dev/$partdev" /mnt 2>&1
+ echo "Saving config backup..."
cp -af "$UPGRADE_BACKUP" "/mnt/$BACKUP_FILE"
umount /mnt
fi
case "$board" in
fsl,ls1012a-frwy-sdboot | \
+ fsl,ls1021a-iot-sdboot | \
fsl,ls1021a-twr-sdboot | \
fsl,ls1043a-rdb-sdboot | \
fsl,ls1046a-rdb-sdboot | \
return $?
;;
fsl,ls1012a-frdm | \
+ fsl,ls1012a-frwy-sdboot | \
fsl,ls1012a-rdb | \
+ fsl,ls1021a-iot-sdboot | \
fsl,ls1021a-twr | \
+ fsl,ls1021a-twr-sdboot | \
fsl,ls1043a-rdb | \
+ fsl,ls1043a-rdb-sdboot | \
fsl,ls1046a-rdb | \
+ fsl,ls1046a-rdb-sdboot | \
fsl,ls1088a-rdb | \
+ fsl,ls1088a-rdb-sdboot | \
fsl,ls2088a-rdb)
return 0
;;
- fsl,ls1012a-frwy-sdboot | \
- fsl,ls1021a-twr-sdboot | \
- fsl,ls1043a-rdb-sdboot | \
- fsl,ls1046a-rdb-sdboot | \
- fsl,ls1088a-rdb-sdboot)
- platform_check_image_sdboot "$1"
- return 0
- ;;
*)
echo "Sysupgrade is not currently supported on $board"
;;
default_do_upgrade "$1"
;;
fsl,ls1012a-frwy-sdboot | \
+ fsl,ls1021a-iot-sdboot | \
fsl,ls1021a-twr-sdboot | \
fsl,ls1043a-rdb-sdboot | \
fsl,ls1046a-rdb-sdboot | \
include $(TOPDIR)/rules.mk
include $(INCLUDE_DIR)/image.mk
+LS_SD_KERNELPART_SIZE = 40
+LS_SD_KERNELPART_OFFSET = 16
LS_SD_ROOTFSPART_OFFSET = 64
LS_SD_IMAGE_SIZE = $(shell echo $$((($(LS_SD_ROOTFSPART_OFFSET) + \
- $(CONFIG_TARGET_ROOTFS_PARTSIZE)) * 1024 * 1024)))
+ $(CONFIG_TARGET_ROOTFS_PARTSIZE)))))
# The limitation of flash sysupgrade.bin is 1MB dtb + 16MB kernel + 32MB rootfs
LS_SYSUPGRADE_IMAGE_SIZE = 49m
+define Image/Prepare
+ # Build .dtb for all boards we may run on
+ $(foreach dts,$(DEVICE_DTS_LIST),
+ $(call Image/BuildDTB,$(DTS_DIR)/$(dts).dts,$(DTS_DIR)/$(dts).dtb)
+ )
+endef
+
define Build/ls-clean
rm -f $@
endef
endef
define Build/ls-append-dtb
- $(call Image/BuildDTB,$(DTS_DIR)/$(1).dts,$(DTS_DIR)/$(1).dtb)
dd if=$(DTS_DIR)/$(1).dtb >> $@
endef
+define Build/ls-append-kernel
+ mkdir -p $@.tmp && \
+ cp $(IMAGE_KERNEL) $@.tmp/fitImage && \
+ make_ext4fs -J -L kernel -l "$(LS_SD_KERNELPART_SIZE)M" "$@.kernel.part" "$@.tmp" && \
+ dd if=$@.kernel.part >> $@ && \
+ rm -rf $@.tmp && \
+ rm -f $@.kernel.part
+endef
+
define Build/ls-append-sdhead
./gen_sdcard_head_img.sh $(STAGING_DIR_IMAGE)/$(1)-sdcard-head.img \
+ $(LS_SD_KERNELPART_OFFSET) $(LS_SD_KERNELPART_SIZE) \
$(LS_SD_ROOTFSPART_OFFSET) $(CONFIG_TARGET_ROOTFS_PARTSIZE)
dd if=$(STAGING_DIR_IMAGE)/$(1)-sdcard-head.img >> $@
endef
After that, You can use "sysupgrade -F".
endef
+define Device/rework-sdcard-images
+ DEVICE_COMPAT_VERSION := 2.0
+ DEVICE_COMPAT_MESSAGE := SD-card images were changed to squashfs + ext4 overlay combined images. \
+ It is required to flash the entire sd-card again and manually copy config.
+endef
+
include $(SUBTARGET).mk
$(eval $(call BuildImage))
TARGET_DEVICES += fsl_ls1021a-twr
define Device/fsl_ls1021a-twr-sdboot
+ $(Device/rework-sdcard-images)
DEVICE_VENDOR := NXP
DEVICE_MODEL := TWR-LS1021A
DEVICE_VARIANT := SD Card Boot
DEVICE_DTS := ls1021a-twr
- FILESYSTEMS := ext4
- IMAGES := sdcard.img sysupgrade.bin
- IMAGE/sdcard.img := \
+ KERNEL := kernel-bin | gzip | fit gzip $$(DTS_DIR)/$$(DEVICE_DTS).dtb
+ IMAGES := sdcard.img.gz sysupgrade.bin
+ IMAGE/sdcard.img.gz := \
ls-clean | \
ls-append-sdhead $(1) | pad-to 4K | \
ls-append $(1)-uboot.bin | pad-to 3M | \
- ls-append $(1)-uboot-env.bin | pad-to 15M | \
- ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \
- append-kernel | pad-to $(LS_SD_ROOTFSPART_OFFSET)M | \
- append-rootfs | check-size $(LS_SD_IMAGE_SIZE)
- IMAGE/sysupgrade.bin := \
- ls-clean | \
- ls-append-sdhead $(1) | pad-to 15M | \
- ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \
- append-kernel | pad-to $(LS_SD_ROOTFSPART_OFFSET)M | \
- append-rootfs | check-size $(LS_SD_IMAGE_SIZE) | append-metadata
+ ls-append $(1)-uboot-env.bin | pad-to 16M | \
+ ls-append-kernel | pad-to $(LS_SD_ROOTFSPART_OFFSET)M | \
+ append-rootfs | pad-to $(LS_SD_IMAGE_SIZE)M | gzip
+ IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
endef
TARGET_DEVICES += fsl_ls1021a-twr-sdboot
define Device/fsl_ls1021a-iot-sdboot
+ $(Device/rework-sdcard-images)
DEVICE_VENDOR := NXP
DEVICE_MODEL := LS1021A-IoT
DEVICE_VARIANT := SD Card Boot
DEVICE_DTS := ls1021a-iot
- FILESYSTEMS := ext4
SUPPORTED_DEVICES :=
- IMAGES := sdcard.img sysupgrade.bin
- IMAGE/sdcard.img := \
+ KERNEL := kernel-bin | gzip | fit gzip $$(DTS_DIR)/$$(DEVICE_DTS).dtb
+ IMAGES := sdcard.img.gz sysupgrade.bin
+ IMAGE/sdcard.img.gz := \
ls-clean | \
ls-append-sdhead $(1) | pad-to 4K | \
ls-append $(1)-uboot.bin | pad-to 1M | \
- ls-append $(1)-uboot-env.bin | pad-to 15M | \
- ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \
- append-kernel | pad-to $(LS_SD_ROOTFSPART_OFFSET)M | \
- append-rootfs | check-size $(LS_SD_IMAGE_SIZE)
- IMAGE/sysupgrade.bin := \
- ls-clean | \
- ls-append-sdhead $(1) | pad-to 15M | \
- ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \
- append-kernel | pad-to $(LS_SD_ROOTFSPART_OFFSET)M | \
- append-rootfs | check-size $(LS_SD_IMAGE_SIZE) | append-metadata
+ ls-append $(1)-uboot-env.bin | pad-to 16M | \
+ ls-append-kernel | pad-to $(LS_SD_ROOTFSPART_OFFSET)M | \
+ append-rootfs | pad-to $(LS_SD_IMAGE_SIZE)M | gzip
+ IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
endef
TARGET_DEVICES += fsl_ls1021a-iot-sdboot
TARGET_DEVICES += fsl_ls1012a-rdb
define Device/fsl_ls1012a-frwy-sdboot
+ $(Device/rework-sdcard-images)
DEVICE_VENDOR := NXP
DEVICE_MODEL := FRWY-LS1012A
DEVICE_PACKAGES += \
tfa-ls1012a-frwy-sdboot \
kmod-ppfe
DEVICE_DTS := freescale/fsl-ls1012a-frwy
- FILESYSTEMS := ext4
- IMAGES := firmware.bin sdcard.img sysupgrade.bin
+ KERNEL := kernel-bin | gzip | fit gzip $$(DTS_DIR)/$$(DEVICE_DTS).dtb
+ IMAGES := firmware.bin sdcard.img.gz sysupgrade.bin
IMAGE/firmware.bin := \
ls-clean | \
ls-append $(1)-bl2.pbl | pad-to 128K | \
ls-append $(1)-fip.bin | pad-to 1856K | \
ls-append $(1)-uboot-env.bin | pad-to 2048K | \
check-size 2097153
- IMAGE/sdcard.img := \
- ls-clean | \
- ls-append-sdhead $(1) | pad-to 15M | \
- ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \
- append-kernel | pad-to $(LS_SD_ROOTFSPART_OFFSET)M | \
- append-rootfs | check-size $(LS_SD_IMAGE_SIZE)
- IMAGE/sysupgrade.bin := \
+ IMAGE/sdcard.img.gz := \
ls-clean | \
- ls-append-sdhead $(1) | pad-to 15M | \
- ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \
- append-kernel | pad-to $(LS_SD_ROOTFSPART_OFFSET)M | \
- append-rootfs | check-size $(LS_SD_IMAGE_SIZE) | append-metadata
+ ls-append-sdhead $(1) | pad-to 16M | \
+ ls-append-kernel | pad-to $(LS_SD_ROOTFSPART_OFFSET)M | \
+ append-rootfs | pad-to $(LS_SD_IMAGE_SIZE)M | gzip
+ IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
endef
TARGET_DEVICES += fsl_ls1012a-frwy-sdboot
TARGET_DEVICES += fsl_ls1043a-rdb
define Device/fsl_ls1043a-rdb-sdboot
+ $(Device/rework-sdcard-images)
DEVICE_VENDOR := NXP
DEVICE_MODEL := LS1043A-RDB
DEVICE_VARIANT := SD Card Boot
kmod-hwmon-ina2xx \
kmod-hwmon-lm90
DEVICE_DTS := freescale/fsl-ls1043a-rdb-sdk
- FILESYSTEMS := ext4
- IMAGES := sdcard.img sysupgrade.bin
- IMAGE/sdcard.img := \
+ KERNEL := kernel-bin | gzip | fit gzip $$(DTS_DIR)/$$(DEVICE_DTS).dtb
+ IMAGES := sdcard.img.gz sysupgrade.bin
+ IMAGE/sdcard.img.gz := \
ls-clean | \
ls-append-sdhead $(1) | pad-to 4K | \
ls-append $(1)-bl2.pbl | pad-to 1M | \
ls-append $(1)-fip.bin | pad-to 5M | \
ls-append $(1)-uboot-env.bin | pad-to 9M | \
- ls-append fsl_ls1043a-rdb-fman.bin | pad-to 15M | \
- ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \
- append-kernel | pad-to $(LS_SD_ROOTFSPART_OFFSET)M | \
- append-rootfs | check-size $(LS_SD_IMAGE_SIZE)
- IMAGE/sysupgrade.bin := \
- ls-clean | \
- ls-append-sdhead $(1) | pad-to 15M | \
- ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \
- append-kernel | pad-to $(LS_SD_ROOTFSPART_OFFSET)M | \
- append-rootfs | check-size $(LS_SD_IMAGE_SIZE) | append-metadata
+ ls-append fsl_ls1043a-rdb-fman.bin | pad-to 16M | \
+ ls-append-kernel | pad-to $(LS_SD_ROOTFSPART_OFFSET)M | \
+ append-rootfs | pad-to $(LS_SD_IMAGE_SIZE)M | gzip
+ IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
endef
TARGET_DEVICES += fsl_ls1043a-rdb-sdboot
TARGET_DEVICES += fsl_ls1046a-rdb
define Device/fsl_ls1046a-rdb-sdboot
+ $(Device/rework-sdcard-images)
DEVICE_VENDOR := NXP
DEVICE_MODEL := LS1046A-RDB
DEVICE_VARIANT := SD Card Boot
kmod-hwmon-ina2xx \
kmod-hwmon-lm90
DEVICE_DTS := freescale/fsl-ls1046a-rdb-sdk
- FILESYSTEMS := ext4
- IMAGES := sdcard.img sysupgrade.bin
- IMAGE/sdcard.img := \
+ KERNEL := kernel-bin | gzip | fit gzip $$(DTS_DIR)/$$(DEVICE_DTS).dtb
+ IMAGES := sdcard.img.gz sysupgrade.bin
+ IMAGE/sdcard.img.gz := \
ls-clean | \
ls-append-sdhead $(1) | pad-to 4K | \
ls-append $(1)-bl2.pbl | pad-to 1M | \
ls-append $(1)-fip.bin | pad-to 5M | \
ls-append $(1)-uboot-env.bin | pad-to 9M | \
- ls-append fsl_ls1046a-rdb-fman.bin | pad-to 15M | \
- ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \
- append-kernel | pad-to $(LS_SD_ROOTFSPART_OFFSET)M | \
- append-rootfs | check-size $(LS_SD_IMAGE_SIZE)
- IMAGE/sysupgrade.bin := \
- ls-clean | \
- ls-append-sdhead $(1) | pad-to 15M | \
- ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \
- append-kernel | pad-to $(LS_SD_ROOTFSPART_OFFSET)M | \
- append-rootfs | check-size $(LS_SD_IMAGE_SIZE) | append-metadata
+ ls-append fsl_ls1046a-rdb-fman.bin | pad-to 16M | \
+ ls-append-kernel | pad-to $(LS_SD_ROOTFSPART_OFFSET)M | \
+ append-rootfs | pad-to $(LS_SD_IMAGE_SIZE)M | gzip
+ IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
endef
TARGET_DEVICES += fsl_ls1046a-rdb-sdboot
TARGET_DEVICES += fsl_ls1088a-rdb
define Device/fsl_ls1088a-rdb-sdboot
+ $(Device/rework-sdcard-images)
DEVICE_VENDOR := NXP
DEVICE_MODEL := LS1088A-RDB
DEVICE_VARIANT := SD Card Boot
kmod-hwmon-ina2xx \
kmod-hwmon-lm90
DEVICE_DTS := freescale/fsl-ls1088a-rdb
- FILESYSTEMS := ext4
- IMAGES := sdcard.img sysupgrade.bin
- IMAGE/sdcard.img := \
+ KERNEL := kernel-bin | gzip | fit gzip $$(DTS_DIR)/$$(DEVICE_DTS).dtb
+ IMAGES := sdcard.img.gz sysupgrade.bin
+ IMAGE/sdcard.img.gz := \
ls-clean | \
ls-append-sdhead $(1) | pad-to 4K | \
ls-append $(1)-bl2.pbl | pad-to 1M | \
ls-append $(1)-uboot-env.bin | pad-to 10M | \
ls-append fsl_ls1088a-rdb-mc.itb | pad-to 13M | \
ls-append fsl_ls1088a-rdb-dpl.dtb | pad-to 14M | \
- ls-append fsl_ls1088a-rdb-dpc.dtb | pad-to 15M | \
- ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \
- append-kernel | pad-to $(LS_SD_ROOTFSPART_OFFSET)M | \
- append-rootfs | check-size $(LS_SD_IMAGE_SIZE)
- IMAGE/sysupgrade.bin := \
- ls-clean | \
- ls-append-sdhead $(1) | pad-to 15M | \
- ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \
- append-kernel | pad-to $(LS_SD_ROOTFSPART_OFFSET)M | \
- append-rootfs | check-size $(LS_SD_IMAGE_SIZE) | append-metadata
+ ls-append fsl_ls1088a-rdb-dpc.dtb | pad-to 16M | \
+ ls-append-kernel | pad-to $(LS_SD_ROOTFSPART_OFFSET)M | \
+ append-rootfs | pad-to $(LS_SD_IMAGE_SIZE)M | gzip
+ IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
endef
TARGET_DEVICES += fsl_ls1088a-rdb-sdboot
#
set -x
-[ $# -eq 3 ] || {
- echo "SYNTAX: $0 <file> <rootfs part offset> <rootfs size>"
+[ $# -eq 5 ] || {
+ echo "SYNTAX: $0 <file> <kernel part offset> <kernel size> <rootfs part offset> <rootfs size>"
exit 1
}
OUTPUT="$1"
-ROOTFSOFFSET="$(($2 * 1024))"
-ROOTFSSIZE="$3"
+KERNELOFFSET="$(($2 * 1024))"
+KERNELSIZE="$3"
+ROOTFSOFFSET="$(($4 * 1024))"
+ROOTFSSIZE="$5"
head=4
-sect=16
+sect=63
-set $(ptgen -o $OUTPUT -h $head -s $sect -l $ROOTFSOFFSET -t 83 -p ${ROOTFSSIZE}M)
+set $(ptgen -o $OUTPUT -h $head -s $sect -t 83 -p ${KERNELSIZE}M@${KERNELOFFSET} -p ${ROOTFSSIZE}M@${ROOTFSOFFSET})
projects / openwrt / staging / jow.git / commitdiff