- config NUT_SERVER
- depends on PACKAGE_nut
- bool "Include server components (upsd)"
- help
- upsd is responsible for serving the data from the drivers to the
- clients. It connects to each driver and maintains a local cache of the
- current state. Queries from the clients are served from this cache, so
- delays are minimal. This program is essential, and must be running at
- all times to actually make any use out of the drivers and clients.
- default y
-
- config NUT_CLIENTS_UPSC
- depends on PACKAGE_nut
- bool "Include command line client (upsc)"
- help
- upsc is provided as a quick way to poll the status of a UPS server. It
- can be used inside shell scripts and other programs that need UPS data
- but don't want to include the full interface.
- default y
-
- config NUT_CLIENTS_UPSLOG
- depends on PACKAGE_nut
- bool "Include logging client (upslog)"
- help
- upslog is a daemon that will poll a UPS at periodic intervals, fetch the
- variables that interest you, format them, and write them to a file.
- default n
-
- config NUT_CLIENTS_UPSCMD
- depends on PACKAGE_nut
- bool "Include UPS controller (upscmd)"
- help
- upscmd allows you to invoke "instant commands" in your UPS hardware. Not
- all hardware supports this, so check the list with -l to see if anything
- will work on your equipment. On hardware that supports it, you can use
- this program to start and stop battery tests, invoke a front panel test
- (beep!), turn the load on or off, and more.
- default n
-
- config NUT_CLIENTS_UPSRW
- depends on PACKAGE_nut
- bool "Include UPS variable editor (upsrw)"
- help
- upsrw allows you to view and change the read/write variables inside your
- UPS. It sends commands via the upsd to your driver, which configures the
- hardware for you. The list of variables that allow you to change their
- values is based on the capabilities of your UPS equipment. Not all
- models support this feature. Typically, cheaper hardware does not
- support any of them.
- default n
-
- config NUT_CLIENTS_UPSMON
- depends on PACKAGE_nut
- bool "Include monitor and shutdown controller (upsmon)"
- help
- upsmon is the client process that is responsible for the most important
- part of UPS monitoring--shutting down the system when the power goes
- out. It can call out to other helper programs for notification purposes
- during power events. upsmon can monitor multiple systems using a single
- process. Every UPS that is defined in the upsmon.conf configuration file
- is assigned a power value and a type (slave or master).
- default y
-
- config NUT_CLIENTS_UPSSCHED
- depends on NUT_CLIENTS_UPSMON
- bool "Include helper for triggering events from upsmon (upssched)"
- help
- upssched was created to allow users to execute programs at times relative
- to events being monitored by upsmon. The original purpose was to allow
- for a shutdown to occur after some fixed period on battery, but there are
- other uses that are possible.
- You can alternatively write your own script and save some space.
- default n
-
config NUT_SSL
depends on PACKAGE_nut
bool "Build with support for OpenSSL"
help
If you have a UPS you can connect to via SNMP, select this.
default n
-
-#
-# Copyright (C) 2006-2015 OpenWrt.org
+
+# Copyright (C) 2006-2016 OpenWrt.org
#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
PKG_LICENSE:=GPL-2.0
PKG_LICENSE_FILES:=LICENSE-GPL2
-PKG_BUILD_DIR:=$(BUILD_DIR)/nut-$(PKG_VERSION)
+PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
PKG_INSTALL:=1
PKG_CONFIG_DEPENDS:= \
- CONFIG_NUT_CLIENTS_UPSC \
- CONFIG_NUT_CLIENTS_UPSCMD \
- CONFIG_NUT_CLIENTS_UPSLOG \
- CONFIG_NUT_CLIENTS_UPSMON \
- CONFIG_NUT_CLIENTS_UPSRW \
- CONFIG_NUT_CLIENTS_UPSSCHED \
CONFIG_NUT_DRIVER_SNMP \
CONFIG_NUT_DRIVER_USB \
- CONFIG_NUT_SERVER \
CONFIG_NUT_SSL
include $(INCLUDE_DIR)/package.mk
SECTION:=net
CATEGORY:=Network
URL:=http://www.networkupstools.org/
- DEPENDS:=nut
+ TITLE:=Network UPS Tools (NUT)
endef
-define Package/nut/description
+define Package/nut/description/Default
Network UPS Tools (NUT) is a client/server monitoring system that
allows computers to share uninterruptible power supply (UPS) and
power distribution unit (PDU) hardware. Clients access the hardware
define Package/nut
$(call Package/nut/Default)
- TITLE:=Network UPS Tools
- DEPENDS:= \
- +libpthread \
- +NUT_DRIVER_SNMP:libnetsnmp \
- +NUT_DRIVER_USB:libusb-compat \
- +NUT_SSL:libopenssl
MENU:=1
endef
+define Package/nut/description
+$(call Package/nut/description/Default)
+endef
+
define Package/nut/config
source "$(SOURCE)/Config.in"
endef
-define Package/nut/conffiles
-/etc/nut/nut.conf
-$(if $(CONFIG_NUT_CLIENTS_UPSMON),/etc/nut/upsmon.conf)
-$(if $(CONFIG_NUT_CLIENTS_UPSSCHED),/etc/nut/upssched.conf)
-$(if $(CONFIG_NUT_SERVER),/etc/nut/ups.conf)
-$(if $(CONFIG_NUT_SERVER),/etc/nut/upsd.conf)
-$(if $(CONFIG_NUT_SERVER),/etc/nut/upsd.users)
+define Package/nut/install
+ true
endef
-define Package/nut/install
+define Package/nut-server/install
+ $(INSTALL_DIR) $(1)/etc/nut
+ $(INSTALL_DIR) $(1)/usr/sbin
+ $(INSTALL_DIR) $(1)/etc/init.d
+ $(INSTALL_DIR) $(1)/usr/share/nut
+ $(INSTALL_DIR) $(1)/etc/init.d
+ $(INSTALL_BIN) ./files/nut-server.init $(1)/etc/init.d/nut-server
+ $(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/sbin/upsd $(1)/usr/sbin
+ $(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/sbin/upsdrvctl $(1)/usr/sbin
+ $(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/share/nut/cmdvartab $(1)/usr/share/nut/
+ $(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/share/nut/driver.list $(1)/usr/share/nut/
+ $(INSTALL_DIR) $(1)/etc/config
+ $(INSTALL_CONF) ./files/nut_server $(1)/etc/config/nut_server
+ ln -sf /var/etc/nut/nut.conf $(1)/etc/nut/nut.conf
+ ln -sf /var/etc/nut/ups.conf $(1)/etc/nut/ups.conf
+ ln -sf /var/etc/nut/upsd.users $(1)/etc/nut/upsd.users
+ ln -sf /var/etc/nut/upsd.conf $(1)/etc/nut/upsd.conf
+endef
+
+define Package/nut-common
+ $(call Package/nut/Default)
+ TITLE+= (common)
+ DEPENDS:= nut \
+ +NUT_DRIVER_SNMP:libnetsnmp \
+ +NUT_DRIVER_USB:libusb-compat \
+ +NUT_SSL:libopenssl
+endef
+
+define Package/nut-common/description
+$(call Package/nut/description/Default)
+This package contains the common files.
+endef
+
+define Package/nut-common/install
$(INSTALL_DIR) $(1)/etc/nut
- $(INSTALL_DIR) $(1)/usr/bin
$(INSTALL_DIR) $(1)/usr/lib
+ $(CP) $(PKG_INSTALL_DIR)/usr/lib/libupsclient.so* $(1)/usr/lib/
+ ln -sf /var/etc/nut/nut.conf $(1)/etc/nut/nut.conf
+endef
+
+define Package/nut-server
+ $(call Package/nut/Default)
+ TITLE+= (server)
+ DEPENDS:=nut +nut-common
+endef
+
+define Package/nut-server/description
+$(call Package/nut/description/Default)
+upsd is responsible for serving the data from the drivers to the
+clients. It connects to each driver and maintains a local cache of the
+current state. Queries from the clients are served from this cache, so
+delays are minimal. This program is essential, and must be running at
+all times to actually make any use out of the drivers and clients.
+endef
+
+define Package/nut-server/conffiles
+/etc/config/nut_server
+endef
+
+define Package/nut-upsmon
+ $(call Package/nut/Default)
+ TITLE+= (monitor)
+ DEPENDS:=nut +nut-common
+ USERID:=nut=113:nut=113
+endef
+
+define Package/nut-upsmon/description
+$(call Package/nut/description/Default)
+upsmon is the client process that is responsible for the most important
+part of UPS monitoring--shutting down the system when the power goes
+out. It can call out to other helper programs for notification purposes
+during power events. upsmon can monitor multiple systems using a single
+process. Every UPS that is defined in the upsmon.conf configuration file
+is assigned a power value and a type (slave or master).
+endef
+
+define Package/nut-upsmon/conffiles
+/etc/config/nut_monitor
+endef
+
+define Package/nut-upsmon/install
+ $(INSTALL_DIR) $(1)/etc/nut
+ $(INSTALL_DIR) $(1)/usr/sbin
+ $(INSTALL_DIR) $(1)/etc/init.d
+ $(INSTALL_BIN) ./files/nut-monitor.init $(1)/etc/init.d/nut-monitor
+ $(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/sbin/upsmon $(1)/usr/sbin/
+ $(INSTALL_DIR) $(1)/etc/config
+ $(INSTALL_CONF) ./files/nut_monitor $(1)/etc/config/nut_monitor
+ ln -sf /var/etc/nut/upsmon.conf $(1)/etc/nut/upsmon.conf
+endef
+
+define Package/nut-upsc
+ $(call Package/nut/Default)
+ TITLE+= (upsc command)
+ DEPENDS:=nut +nut-common
+endef
+
+define Package/nut-upsc/description
+$(call Package/nut/description/Default)
+upsc is provided as a quick way to poll the status of a UPS server. It
+can be used inside shell scripts and other programs that need UPS data
+but don not want to include the full interface.
+endef
+
+define Package/nut-upsc/install
+ $(INSTALL_DIR) $(1)/usr/bin
+ $(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/bin/upsc $(1)/usr/bin
+endef
+
+define Package/nut-upslog
+ $(call Package/nut/Default)
+ TITLE+= (logging client)
+ DEPENDS:=nut +nut-common
+endef
+
+define Package/nut-upslog/description
+$(call Package/nut/description/Default)
+upslog is a daemon that will poll a UPS at periodic intervals, fetch the
+variables that interest you, format them, and write them to a file.
+endef
+
+define Package/nut-upslog/install
+ $(INSTALL_DIR) $(1)/usr/bin
+ $(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/bin/upslog $(1)/usr/bin/
+endef
+
+define Package/nut-upscmd
+ $(call Package/nut/Default)
+ TITLE+= (controller)
+ DEPENDS:=nut +nut-common
+endef
+
+define Package/nut-upscmd/description
+$(call Package/nut/description/Default)
+upscmd allows you to invoke "instant commands" in your UPS hardware. Not
+all hardware supports this, so check the list with -l to see if anything
+will work on your equipment. On hardware that supports it, you can use
+this program to start and stop battery tests, invoke a front panel test
+(beep!), turn the load on or off, and more.
+endef
+
+define Package/nut-upscmd/install
+ $(INSTALL_DIR) $(1)/usr/bin
+ $(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/bin/upscmd $(1)/usr/bin/
+endef
+
+define Package/nut-upsrw
+ $(call Package/nut/Default)
+ TITLE+= (variable editor)
+ DEPENDS:=nut +nut-common
+endef
+
+define Package/nut-upsrw/description
+$(call Package/nut/description/Default)
+upsrw allows you to view and change the read/write variables inside your
+UPS. It sends commands via the upsd to your driver, which configures the
+hardware for you. The list of variables that allow you to change their
+values is based on the capabilities of your UPS equipment. Not all
+models support this feature. Typically, cheaper hardware does not
+support any of them.
+endef
+
+define Package/nut-upsrw/install
+ $(INSTALL_DIR) $(1)/usr/bin
+ $(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/bin/upsrw $(1)/usr/bin/
+endef
+
+define Package/nut-upssched
+ $(call Package/nut/Default)
+ TITLE+= (helper for triggering events from upsmon)
+ DEPENDS:=nut +nut-common +nut-upsmon
+endef
+
+define Package/nut-upssched/description
+$(call Package/nut/description/Default)
+upssched was created to allow users to execute programs at times relative
+to events being monitored by upsmon. The original purpose was to allow
+for a shutdown to occur after some fixed period on battery, but there are
+other uses that are possible.
+You can alternatively write your own script and save some space.
+endef
+
+define Package/nut-upssched/conffiles
+/etc/nut/upssched.conf
+endef
+
+define Package/nut-upssched/install
+ $(INSTALL_DIR) $(1)/usr/bin
$(INSTALL_DIR) $(1)/usr/sbin
- $(INSTALL_CONF) $(PKG_INSTALL_DIR)/etc/nut/nut.conf.sample $(1)/etc/nut/nut.conf
- $(if $(or $(CONFIG_NUT_CLIENTS_UPSC),\
- $(CONFIG_NUT_CLIENTS_UPSCMD),\
- $(CONFIG_NUT_CLIENTS_LOG),\
- $(CONFIG_NUT_CLIENTS_UPSRW),\
- $(CONFIG_NUT_CLIENTS_UPSMON),\
- $(CONFIG_NUT_CLIENTS_UPSSCHED)),$(CP) $(PKG_INSTALL_DIR)/usr/lib/libupsclient.so* $(1)/usr/lib/)
- $(if $(or $(CONFIG_NUT_SERVER),\
- $(CONFIG_NUT_CLIENTS_UPSMON)),$(INSTALL_DIR) $(1)/etc/init.d)
- $(if $(CONFIG_NUT_SERVER),$(INSTALL_DIR) $(1)/lib/nut)
- $(if $(CONFIG_NUT_SERVER),$(INSTALL_DIR) $(1)/usr/share/nut)
- $(if $(CONFIG_NUT_SERVER),$(CP) ./files/nut-server.init $(1)/etc/init.d/)
- $(if $(CONFIG_NUT_SERVER),$(CP) $(PKG_INSTALL_DIR)/usr/sbin/upsd $(1)/usr/sbin)
- $(if $(CONFIG_NUT_SERVER),$(CP) $(PKG_INSTALL_DIR)/usr/sbin/upsdrvctl $(1)/usr/sbin)
- $(if $(CONFIG_NUT_SERVER),$(CP) $(PKG_INSTALL_DIR)/usr/share/nut/cmdvartab $(1)/usr/share/nut/)
- $(if $(CONFIG_NUT_SERVER),$(CP) $(PKG_INSTALL_DIR)/usr/share/nut/driver.list $(1)/usr/share/nut/)
- $(if $(CONFIG_NUT_SERVER),$(INSTALL_CONF) $(PKG_INSTALL_DIR)/etc/nut/ups.conf.sample $(1)/etc/nut/ups.conf)
- $(if $(CONFIG_NUT_SERVER),$(INSTALL_CONF) $(PKG_INSTALL_DIR)/etc/nut/upsd.conf.sample $(1)/etc/nut/upsd.conf)
- $(if $(CONFIG_NUT_SERVER),$(INSTALL_CONF) $(PKG_INSTALL_DIR)/etc/nut/upsd.users.sample $(1)/etc/nut/upsd.users)
- $(if $(CONFIG_NUT_CLIENTS_UPSC),$(CP) $(PKG_INSTALL_DIR)/usr/bin/upsc $(1)/usr/bin/)
- $(if $(CONFIG_NUT_CLIENTS_UPSCMD),$(CP) $(PKG_INSTALL_DIR)/usr/bin/upscmd $(1)/usr/bin/)
- $(if $(CONFIG_NUT_CLIENTS_UPSLOG),$(CP) $(PKG_INSTALL_DIR)/usr/bin/upslog $(1)/usr/bin/)
- $(if $(CONFIG_NUT_CLIENTS_UPSRW),$(CP) $(PKG_INSTALL_DIR)/usr/bin/upsrw $(1)/usr/bin/)
- $(if $(CONFIG_NUT_CLIENTS_UPSMON),$(CP) ./files/nut-monitor.init $(1)/etc/init.d/)
- $(if $(CONFIG_NUT_CLIENTS_UPSMON),$(CP) $(PKG_INSTALL_DIR)/usr/sbin/upsmon $(1)/usr/sbin/)
- $(if $(CONFIG_NUT_CLIENTS_UPSMON),$(INSTALL_CONF) $(PKG_INSTALL_DIR)/etc/nut/upsmon.conf.sample $(1)/etc/nut/upsmon.conf)
- $(if $(CONFIG_NUT_CLIENTS_UPSSCHED),$(CP) $(PKG_INSTALL_DIR)/usr/bin/upssched-cmd $(1)/usr/bin/)
- $(if $(CONFIG_NUT_CLIENTS_UPSSCHED),$(CP) $(PKG_INSTALL_DIR)/usr/sbin/upssched $(1)/usr/sbin/)
- $(if $(CONFIG_NUT_CLIENTS_UPSSCHED),$(INSTALL_CONF) $(PKG_INSTALL_DIR)/etc/nut/upssched.conf.sample $(1)/etc/nut/upssched.conf)
+ $(INSTALL_DIR) $(1)/etc/nut
+ $(INSTALL_DIR) $(1)/etc/uci-defaults
+ $(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/bin/upssched-cmd $(1)/usr/bin/
+ $(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/sbin/upssched $(1)/usr/sbin/
+ $(INSTALL_CONF) $(PKG_INSTALL_DIR)/etc/nut/upssched.conf.sample $(1)/etc/nut/upssched.conf
+ $(INSTALL_DATA) ./files/nut-sched.default $(1)/etc/uci-defaults/nut-upssched
endef
define Package/nut-web-cgi
$(call Package/nut/Default)
TITLE+= Web CGI interface
- DEPENDS+=+libgd
+ DEPENDS:=nut +nut-common +libgd
endef
define Package/nut-web-cgi/description
/etc/nut/upsset.conf
/etc/nut/upsstats.html
/etc/nut/upsstats-single.html
+/etc/config/nut_cgi
endef
define Package/nut-web-cgi/install
+ $(INSTALL_DIR) $(1)/www/cgi-bin/nut $(1)/www/nut
$(INSTALL_DIR) $(1)/etc/nut
- $(INSTALL_DIR) $(1)/usr/share/www/cgi-bin
- $(INSTALL_CONF) $(PKG_INSTALL_DIR)/etc/nut/hosts.conf.sample $(1)/etc/nut/hosts.conf
- $(INSTALL_CONF) $(PKG_INSTALL_DIR)/etc/nut/upsset.conf.sample $(1)/etc/nut/upsset.conf
+ $(CP) $(PKG_INSTALL_DIR)/usr/html/* $(1)/www/nut/
+ $(INSTALL_DIR) $(1)/etc/uci-defaults
+ $(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/cgi-bin/* $(1)/www/cgi-bin/nut
+ $(INSTALL_CONF) ./files/add_nut_httpd_conf $(1)/etc/uci-defaults/add_nut_httpd_conf
$(INSTALL_CONF) $(PKG_INSTALL_DIR)/etc/nut/upsstats.html.sample $(1)/etc/nut/upsstats.html
$(INSTALL_CONF) $(PKG_INSTALL_DIR)/etc/nut/upsstats-single.html.sample $(1)/etc/nut/upsstats-single.html
- $(CP) $(PKG_INSTALL_DIR)/usr/share/www/nut $(1)/usr/share/www/
- $(CP) $(PKG_INSTALL_DIR)/usr/share/www/cgi-bin/nut $(1)/usr/share/www/cgi-bin/
+ $(INSTALL_DIR) $(1)/etc/config
+ $(INSTALL_CONF) ./files/nut_cgi $(1)/etc/config/nut_cgi
+ $(INSTALL_DIR) $(1)/etc/init.d
+ $(INSTALL_BIN) ./files/nut-cgi.init $(1)/etc/init.d/nut-cgi
+ ln -sf /var/etc/nut/hosts.conf $(1)/etc/nut/hosts.conf
endef
define Package/nut-avahi-service
$(call Package/nut/Default)
TITLE+= (Avahi service)
- DEPENDS+=+avahi-daemon
+ DEPENDS:=nut +avahi-daemon
endef
define Package/nut-avahi-service/description
define Package/nut-driver-$(2)
$(call Package/nut/Default)
TITLE:=$(2) (NUT $(1) driver)
+ DEPENDS:=nut +nut-common
$(if $(filter $(1),snmp),DEPENDS+= @NUT_DRIVER_SNMP)
$(if $(filter $(1),usb),DEPENDS+= @NUT_DRIVER_USB)
endef
--$(if $(CONFIG_NUT_DRIVER_SNMP),with,without)-snmp \
--without-neon \
--without-powerman \
+ --with-cgi \
--without-ipmi \
--without-freeipmi \
--$(if $(CONFIG_NUT_SSL),with,without)-ssl $(if $(CONFIG_NUT_SSL),--with-openssl) \
--without-libltdl \
- --$(if $(CONFIG_PACKAGE_nut-web-cgi),with,without)-cgi \
--with-statepath=/var/run \
--with-drvpath=/lib/nut \
- --with-cgipath=/usr/share/www/cgi-bin/nut \
- --with-htmlpath=/usr/share/www/nut \
--with-user=root \
--with-group=root
endef
$(eval $(call BuildPackage,nut))
+$(eval $(call BuildPackage,nut-common))
+$(eval $(call BuildPackage,nut-server))
+$(eval $(call BuildPackage,nut-upsmon))
+$(eval $(call BuildPackage,nut-upsc))
+$(eval $(call BuildPackage,nut-upscmd))
+$(eval $(call BuildPackage,nut-upslog))
+$(eval $(call BuildPackage,nut-upsrw))
+$(eval $(call BuildPackage,nut-upssched))
$(eval $(call BuildPackage,nut-web-cgi))
$(eval $(call BuildPackage,nut-avahi-service))
$(foreach d,$(filter-out $(SERIAL_DRIVERLIST_IGNORE),$(SERIAL_DRIVERLIST)),$(eval $(call BuildPackage,nut-driver-$(d))))
--- /dev/null
+#!/bin/sh /etc/rc.common
+# Copyright © 2012 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+START=51
+
+DEFAULT=/etc/default/nut
+UPSCGI_C=/var/etc/nut/hosts.conf
+
+nut_upscgi_add() {
+ local cfg="$1"
+ local upsname
+ local hostname
+ local port
+ local displayname
+
+ config_get upsname "$cfg" upsname
+ config_get hostname "$cfg" hostname localhost
+ config_get port "$cfg" port
+ config_get pass "$cfg" password
+ system="$upsname@$hostname"
+ if [ -n "$port" ]; then
+ system="$system:$port";
+ fi
+ config_get displayname "$cfg" displayname
+ echo "MONITOR $system \"$displayname\"" >> $UPSCGI_C
+}
+
+start() {
+ rm -f $UPSCGI_C
+
+ config_load nut_cgi
+
+ config_foreach nut_upscgi_add host
+
+ chmod 640 /var/etc/nut/hosts.conf
+}
+
+stop() {
+ rm -f $UPSCGI_C
+}
+
START=60
USE_PROCD=1
+UPSMON_C=/var/etc/nut/upsmon.conf
-restart() {
- stop_service
- start_service
+nut_upsmon_conf() {
+ local cfg="$1"
+
+ echo "# Config file automatically generated from UCI config" > $UPSMON_C
+
+ config_get runas "$cfg" runas "nut"
+ [ -n "$runas" ] && echo "RUN_AS_USER $runas" >> $UPSMON_C
+
+ config_get val "$cfg" minsupplies 1
+ echo "MINSUPPLIES $val" >> $UPSMON_C
+
+ config_get val "$cfg" shutdowncmd "/sbin/halt"
+ echo "SHUTDOWNCMD \"$val\"" >> $UPSMON_C
+
+ config_get val "$cfg" notifycmd
+ [ -n "$val" ] && echo "NOTIFYCMD \"$val\"" >> $UPSMON_C
+
+ config_get val "$cfg" pollfreq 5
+ echo "POLLFREQ $val" >> $UPSMON_C
+
+ config_get val "$cfg" pollfreqalert 5
+ echo "POLLFREQALERT $val" >> $UPSMON_C
+
+ config_get val "$cfg" hostsync 15
+ echo "HOSTSYNC $val" >> $UPSMON_C
+
+ config_get val "$cfg" deadtime 15
+ echo "DEADTIME $val" >> $UPSMON_C
+
+ config_get val "$cfg" powerdownflag /var/run/killpower
+ echo "POWERDOWNFLAG $val" >> $UPSMON_C
+
+ config_get val "$cfg" onlinemsg
+ [ -n "$val" ] && echo "NOTIFYMSG ONLINE \"$val\"" >> $UPSMON_C
+ config_get val "$cfg" onbattmsg
+ [ -n "$val" ] && echo "NOTIFYMSG ONBATT \"$val\"" >> $UPSMON_C
+ config_get val "$cfg" lowbattmsg
+ [ -n "$val" ] && echo "NOTIFYMSG LOWBATT \"$val\"" >> $UPSMON_C
+ config_get val "$cfg" fsdmsg
+ [ -n "$val" ] && echo "NOTIFYMSG FSD \"$val\"" >> $UPSMON_C
+ config_get val "$cfg" commokmsg
+ [ -n "$val" ] && echo "NOTIFYMSG COMMOK \"$val\"" >> $UPSMON_C
+ config_get val "$cfg" commbadmsg
+ [ -n "$val" ] && echo "NOTIFYMSG COMMBAD \"$val\"" >> $UPSMON_C
+ config_get val "$cfg" shutdownmsg
+ [ -n "$val" ] && echo "NOTIFYMSG SHUTDOWN \"$val\"" >> $UPSMON_C
+ config_get val "$cfg" replbattmsg
+ [ -n "$val" ] && echo "NOTIFYMSG REPLBATT \"$val\"" >> $UPSMON_C
+ config_get val "$cfg" nocommmsg
+ [ -n "$val" ] && echo "NOTIFYMSG NOCOMM \"$val\"" >> $UPSMON_C
+ config_get val "$cfg" noparentmsg
+ [ -n "$val" ] && echo "NOTIFYMSG NOPARENT \"$val\"" >> $UPSMON_C
+
+ notifylist() {
+ local value="$1"
+ append optval "$value" "+"
+ }
+
+ setnotify() {
+ local cfg="$1"
+ local optname="$2"
+ local optval
+ config_list_foreach "$cfg" "$optname" notifylist
+ if [ -z "$optval" ]; then
+ # If no list fallback to trying option, fallback to default
+ config_get optval "$cfg" "$optname" "$default"
+ if [ -n "$optval" ]; then
+ echo "$optval"
+ else
+ # No default, so do the NUT default
+ echo "SYSLOG"
+ fi
+ else
+ echo "$optval"
+ fi
+ }
+
+ local default optval
+ val=""
+ config_list_foreach "$cfg" defaultnotify notifylist
+ default="$optval"
+ echo "NOTIFYFLAG ONLINE $(setnotify "$cfg" onlinenotify)" >> $UPSMON_C
+ echo "NOTIFYFLAG ONBATT $(setnotify "$cfg" onbattnotify)" >> $UPSMON_C
+ echo "NOTIFYFLAG LOWBATT $(setnotify "$cfg" lowbatnotify)" >> $UPSMON_C
+ echo "NOTIFYFLAG FSD $(setnotify "$cfg" fsdnotify)" >> $UPSMON_C
+ echo "NOTIFYFLAG COMMOK $(setnotify "$cfg" commoknotify)" >> $UPSMON_C
+ echo "NOTIFYFLAG COMMBAD $(setnotify "$cfg" commbadnotify)" >> $UPSMON_C
+ echo "NOTIFYFLAG SHUTDOWN $(setnotify "$cfg" shutdownnotify)" >> $UPSMON_C
+ echo "NOTIFYFLAG REPLBATT $(setnotify "$cfg" repolbattnotify)" >> $UPSMON_C
+ echo "NOTIFYFLAG NOCOMM $(setnotify "$cfg" nocommnotify)" >> $UPSMON_C
+ echo "NOTIFYFLAG NOPARENT $(setnotify "$cfg" noparentnotify)" >> $UPSMON_C
+
+ config_get val "$cfg" rbwarntime 43200
+ echo "RBWARNTIME $val" >> $UPSMON_C
+
+ config_get val "$cfg" nocommwarntime 300
+ echo "NOCOMMWARNTIME $val" >> $UPSMON_C
+
+ config_get val "$cfg" finaldelay 5
+ echo "FINALDELAY $val" >> $UPSMON_C
+
+ config_get val "$cfg" certpath
+ if [ -n "$val" ]; then echo "CERTPATH $val" >> $UPSMON_C; fi
+
+ config_get_bool val "$cfg" certverify 0
+ if [ -n "$val" ]; then echo "CERTVERIFY $val" >> $UPSMON_C; fi
+
+ config_get_bool val "$cfg" forcessl 0
+ if [ -n "$val" ]; then echo "FORCESSL $val" >> $UPSMON_C; fi
+}
+
+nut_upsmon_add() {
+ local cfg="$1"
+ local type="$2"
+ local upsname
+ local hostname
+ local port
+ local powervalue
+ local username
+ local password
+ local system
+
+ # If no core config, use defaults
+ [ -r $UPSMON_C ] || nut_upsmon_conf ""
+
+ config_get upsname "$cfg" upsname
+ config_get hostname "$cfg" hostname localhost
+ config_get port "$cfg" port
+ config_get powervalue "$cfg" powervalue 1
+ config_get username "$cfg" username
+ config_get password "$cfg" password
+ system="$upsname@$hostname"
+ if [ -n "$port" ]; then
+ system="$system:$port";
+ fi
+ echo "MONITOR $system $powervalue $username $password $type" >> $UPSMON_C
}
start_service() {
- upsmon -p
+ [ -d $RUN_D ] || mkdir -p $RUN_D
+ mkdir -p /var/etc/nut
+ chmod 640 /var/etc/nut
+ rm -f $UPSMON_C
+
+ config_load nut_monitor
+
+ config_foreach nut_upsmon_conf upsmon
+ config_foreach nut_upsmon_add master master
+ config_foreach nut_upsmon_add slave slave
+
+ [ -z "$(cat /var/etc/nut/nut.conf)" ] && echo "MODE=netclient" >>/var/etc/nut/nut.conf
+
+ chmod 640 $UPSMON_C
+ chmod 640 /var/etc/nut/nut.conf
+
+ chown ${runas:-root}:$(id -gn ${runas:-root}) $UPSMON_C
+ $DEBUG /usr/sbin/upsmon $UPSMON_OPTIONS
}
stop_service() {
- upsmon -c stop
+ [ -r $PID_F ] && /usr/sbin/upsmon -c stop
+ rm -f $UPSMON_C
}
reload_service() {
--- /dev/null
+#!/bin/sh
+
+uci batch <<EOF
+set nut_monitor.@upsmon[-1]=upsmon
+set nut_monitor.@upsmon[-1].notifycmd=/usr/bin/upssched-cmd
+set nut_monitor.@upsmon[-1].defaultnotify="SYSLOG EXEC"
+commit nut_monitor
+EOF
+
+
#!/bin/sh /etc/rc.common
-
+# Copyright © 2012 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
START=50
+
+RUN_D=/var/run
+PID_F=$RUN_D/upsd.pid
+UPS_C=/var/etc/nut/ups.conf
+USERS_C=/var/etc/nut/upsd.users
+UPSD_C=/var/etc/nut/upsd.conf
+
USE_PROCD=1
-restart() {
- stop_service
- start_service
+listen_address() {
+ local cfg="$1"
+
+ config_get address "$cfg" address "::1"
+ config_get port "$cfg" port
+ echo "LISTEN $address $port" >>$UPSD_C
+}
+
+upsd_config() {
+ local cfg="$1"
+ local maxage maxconn certfile
+
+ # Note runas support requires you make sure USB device file is readable by
+ # the runas user
+ config_get runas "$cfg" runas
+
+ config_get maxage "$cfg" maxage
+ [ -n "$maxage" ] && echo "MAXAGE $maxage" >>$UPSD_C
+
+ config_get statepath "$cfg" statepath
+ [ -n "$statepath" ] && echo "STATEPATH $statepath" >>$UPSD_C
+
+ config_get maxconn "$cfg" maxconn
+ [ -n "$maxconn" ] && echo "MAXCONN $maxconn" >>$UPSD_C
+
+ #NOTE: certs only apply to SSL-enabled version
+ config_get certfile "$cfg" certfile
+ [ -n "$certfile" ] && echo "CERTFILE $certfile" >>$UPSD_C
+}
+
+nut_user_add() {
+ local cfg="$1"
+ local a
+ local val
+
+ config_get val "$cfg" username "$1"
+ echo "[$val]" >> $USERS_C
+
+ config_get val "$cfg" password
+ echo " password = $val" >> $USERS_C
+
+ config_get val "$cfg" actions
+ for a in $val; do
+ echo " actions = $a" >> $USERS_C
+ done
+
+ instcmd() {
+ local val="$1"
+ echo " instcmds = $val" >> $USERS_C
+ }
+
+ config_list_foreach "$cfg" instcmd instcmd
+
+ config_get val "$cfg" upsmon
+ if [ -n "$val" ]; then
+ echo " upsmon $val" >> $USERS_C
+ fi
}
start_service() {
- upsdrvctl start
- upsd
+ local runas statepath
+
+ mkdir -p /var/etc/nut
+ chmod -R 750 /var/etc/nut
+
+ rm -f $UPSD_C
+ rm -f $USERS_C
+ rm -f $UPSD_C
+ rm -f /var/etc/nut/nut.conf
+
+ echo "# Config file automatically generated from UCI config" > $UPS_C
+ echo "# Config file automatically generated from UCI config" > $USERS_C
+ echo "# Config file automatically generated from UCI config" > $UPSD_C
+
+ local in_driver have_drivers
+ config_cb() {
+ if [ "$1" != "driver" ]; then
+ in_driver=
+ else
+ echo "[$2]" >> $UPS_C
+ in_driver=true
+ have_drivers=true
+ fi
+ }
+ option_cb() {
+ if [ "$in_driver" = "true" ]; then
+ echo " $1 = $2" >> $UPS_C
+ fi
+ }
+
+ config_load nut_server
+
+ config_foreach nut_user_add user
+ config_foreach upsd_config upsd
+ config_foreach listen_address listen_address
+
+ echo "MODE=netserver" >>/var/etc/nut/nut.conf
+
+ chmod 0640 $USERS_C
+ chmod 0640 $UPS_C
+ chmod 0640 $UPSD_C
+ chmod 0640 /var/etc/nut/nut.conf
+
+ if [ -n "$runas" ]; then
+ chown -R $runas:$(id -gn $runas) /var/etc/nut
+ fi
+
+ if [ "$have_drivers" = "true" ]; then
+ $DEBUG /usr/sbin/upsd ${runas:+-u $runas} $OPTIONS
+ $DEBUG /usr/sbin/upsdrvctl ${runas:+-u $runas} start
+ fi
+}
+
+
+nut_driver_stop() {
+ local cfg="$1"
+ local driver
+
+ config_get driver "$cfg" driver
+
+ [ -r /var/run/$driver-$cfg ] && /usr/sbin/upsdrvctl stop $cfg
}
stop_service() {
- upsd -c stop
- upsdrvctl stop
+ [ -r $PID_F ] && /usr/sbin/upsd -c stop
+ config_load ups
+ config_foreach nut_driver_stop driver
}
reload_service() {
--- /dev/null
+#config host
+# option upsname upsname
+# option hostname localhost
+# option port # optional port number
+# option displayname "Display Name"
+
--- /dev/null
+#config upsmon 'upsmon'
+# option runas run-as-user
+# option minsupplies 1
+# option shutdowncmd /sbin/halt
+# option notifycmd /path/to/cmd
+# list defaultnotify SYSLOG
+# option pollfreq 5
+# option pollfreqalert 5
+# option hostsync 15
+# option deadtime 15
+# option powerdownflags /var/run/killpower
+# option onlinemsg "online message"
+# option onbattmsg "on battery message"
+# option lowbattmsg "low battery message"
+# option fsdmsg "forced shutdown message"
+# option comokmsg "communications restored message"
+# option combadmsg "communications bad message"
+# option shutdowmsg "shutdown message"
+# option replbattmsg "replace battery message"
+# option nocommmsg "no communications message"
+# option noparentmsg "no parent message"
+# option onlinenotify "online notify flag 1|0"
+# option onbattnotify "on battery notify flag 1|0"
+# option lowbattnotify "low battery notify flag 1|0"
+# option fsdnotify "forced shutdown notify flag 1|0"
+# option comoknotify "communications restored notify flag 1|0"
+# option combadnotify "communications bad notify flag 1|0"
+# option shutdownotify "shutdown notify flag 1|0"
+# option replbattnotify "replace battery notify flag 1|0"
+# option nocommnotify "no communications notify flag 1|0"
+# option noparentnotify "no parent notify flag 1|0"
+# option rbwarntime 4200 # replace battery warn time
+# option nocommwarntime 300 # no communications warn time
+# option finaldelay 5 # final delay
+# option certpath /path/to/ca/dir
+# option certverify 0
+# option forcessl 0
+
+#config master
+# option upsname upsname
+# option hostname localhost
+# option port # optional port number
+# option powervalue 1
+# option username upsuser
+# option password upspassword
+
+#config slave
+# option upsname upsname
+# option hostname localhost
+# option port # optional port number
+# option powervalue 1
+# option username upsuser
+# option password upspassword
+
--- /dev/null
+#config driver 'upsname'
+# option driver usbhid-ups
+# option port auto
+# option other other-value
+# option runas root
+
+#config user
+# option username upsuser
+# option password upspassword
+# option actions optional-action
+# list instcmd optional-instant-command
+# option upsmon slave|master
+
+#config listen_address
+# option address ::1
+# option port 3493
+
+#config upsd 'upsd'
+# option maxage 15
+# option statepath /var/run/nut
+# option maxconn 1024
+# NB: certificates only apply to SSL-enabled version
+# option certfile /usr/local/etc/upsd.pem
PKG_NAME:=collectd
PKG_VERSION:=5.5.3
-PKG_RELEASE:=1
+PKG_RELEASE:=2
PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.bz2
PKG_SOURCE_URL:=http://collectd.org/files/
$(eval $(call BuildPlugin,network,network input/output,network,+PACKAGE_COLLECTD_ENCRYPTED_NETWORK:libgcrypt))
$(eval $(call BuildPlugin,nginx,nginx status input,nginx,+PACKAGE_collectd-mod-nginx:libcurl))
$(eval $(call BuildPlugin,ntpd,NTP daemon status input,ntpd,))
-$(eval $(call BuildPlugin,nut,UPS monitoring input,nut,+PACKAGE_collectd-mod-nut:nut))
+$(eval $(call BuildPlugin,nut,UPS monitoring input,nut,+PACKAGE_collectd-mod-nut:nut-common))
$(eval $(call BuildPlugin,olsrd,OLSRd status input,olsrd,))
$(eval $(call BuildPlugin,onewire,onewire sensor input,onewire,+PACKAGE_collectd-mod-onewire:libow-capi @BROKEN))
$(eval $(call BuildPlugin,openvpn,OpenVPN traffic/compression input,openvpn,))
projects / feed / packages.git / commitdiff