ramips: use DT trigger for 2G WiFi on ASUS RT-AC51U

Like for the RT-AC54U, this uses a DT trigger for WiFi also at the
RT-AC51U. While at it, rename node and label to wifi2g.

Note that the 5g WiFi LED still isn't supported (see PR #3017 for
further details: https://github.com/openwrt/openwrt/pull/3017 )

Tested-by: Davide Fioravanti <pantanastyle@gmail.com>
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

diff --git a/target/linux/ramips/dts/mt7620a_asus_rt-ac51u.dts b/target/linux/ramips/dts/mt7620a_asus_rt-ac51u.dts
index 4c98c85dee3a8454672d478fd05a618bbf0a4fb2..1dd0e5cfe0006b4c3d2aae68c1c8b2cdfbe1d55b 100644 (file)
--- a/target/linux/ramips/dts/mt7620a_asus_rt-ac51u.dts
+++ b/target/linux/ramips/dts/mt7620a_asus_rt-ac51u.dts
@@ -28,9 +28,10 @@
                        linux,default-trigger = "usbport";
                };
 
-               wifi {
-                       label = "rt-ac51u:blue:wifi";
+               wifi2g {
+                       label = "rt-ac51u:blue:wifi2g";
                        gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+                       linux,default-trigger = "phy1tpt";
                };
        };
 };

diff --git a/target/linux/ramips/mt7620/base-files/etc/board.d/01_leds b/target/linux/ramips/mt7620/base-files/etc/board.d/01_leds
index d332e02bbd3ccd8807b3d6e392398ac359140f9a..c1deae59e31d57f3b1aa7d96a03e5404cac69513 100755 (executable)
--- a/target/linux/ramips/mt7620/base-files/etc/board.d/01_leds
+++ b/target/linux/ramips/mt7620/base-files/etc/board.d/01_leds
@@ -47,12 +47,6 @@ asus,rt-n14u)
        ucidef_set_led_netdev "wan" "wan" "$boardname:blue:wan" eth0.2
        set_wifi_led "$boardname:blue:air"
        ;;
-asus,rt-ac51u|\
-kingston,mlw221|\
-kingston,mlwg2|\
-sanlinking,d240)
-       set_wifi_led "$boardname:blue:wifi"
-       ;;
 bdcom,wap2100-sk)
        set_wifi_led "$boardname:green:wlan2g"
        ;;
@@ -139,6 +133,11 @@ kimax,u35wf)
        set_wifi_led "$boardname:blue:wifi"
        ucidef_set_led_netdev "eth" "ETH" "$boardname:green:eth" "eth0"
        ;;
+kingston,mlw221|\
+kingston,mlwg2|\
+sanlinking,d240)
+       set_wifi_led "$boardname:blue:wifi"
+       ;;
 lava,lr-25g001)
        ucidef_set_led_netdev "wlan2g" "WiFi 2.4GHz" "$boardname:green:wlan2g" "wlan1"
        ucidef_set_led_netdev "wlan5g" "WiFi 5GHz" "$boardname:green:wlan5g" "wlan0"