+++ /dev/null
-#!/bin/sh
-
-[ -e /lib/firmware/$FIRMWARE ] && exit 0
-
-. /lib/functions/caldata.sh
-
-board=$(board_name)
-
-case "$FIRMWARE" in
-"ath9k-eeprom-pci-0000:43:00.0.bin")
- case $board in
- netgear,wndr4700)
- . /lib/upgrade/nand.sh
-
- if [ -n "$(nand_find_volume ubi0 caldata)" ]; then
- caldata_extract_ubi "caldata" 0x1000 0x1000
- else
- caldata_extract "wifi_data" 0x1000 0x1000
- ath9k_patch_mac $(mtd_get_mac_binary wifi_data 0x0)
- fi
- ;;
- *)
- caldata_die "board $board is not supported yet"
- ;;
- esac
- ;;
-
-"ath9k-eeprom-pci-0000:44:00.0.bin")
- case $board in
- netgear,wndr4700)
- . /lib/upgrade/nand.sh
-
- if [ -n "$(nand_find_volume ubi0 caldata)" ]; then
- caldata_extract_ubi "caldata" 0x5000 0x1000
- else
- caldata_extract "wifi_data" 0x5000 0x1000
- ath9k_patch_mac $(mtd_get_mac_binary wifi_data 0xc)
- fi
- ;;
- *)
- caldata_die "board $board is not supported yet"
- ;;
- esac
- ;;
-esac
label = "wifi_data";
reg = <0x07fc0000 0x00040000>;
read-only;
+
+ compatible = "nvmem-cells";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ macaddr_wifi_0: macaddr@0 {
+ reg = <0x0 0x6>;
+ };
+ macaddr_wifi_c: macaddr@c {
+ reg = <0xc 0x6>;
+ };
+
+ calibration_wifi_1000: calibration@1000 {
+ reg = <0x1000 0x440>;
+ };
+
+ calibration_wifi_5000: calibration@5000 {
+ reg = <0x5000 0x440>;
+ };
};
};
};
compatible = "pci168c,0030";
reg = <0x00430000 0 0 0 0>;
interrupts = <3>; /* INTC */
- qca,no-eeprom;
- /* wifi CAL & MAC is stored in nvram */
+ nvmem-cell-names = "mac-address", "calibration";
+ nvmem-cells = <&macaddr_wifi_0>, <&calibration_wifi_1000>;
/*
* Because this was such a pain.
compatible = "pci168c,0033";
reg = <0x00440000 0 0 0 0>;
interrupts = <4>; /* INTD */
- qca,no-eeprom;
- /* wifi CAL & MAC is stored in nvram */
+ nvmem-cell-names = "mac-address", "calibration";
+ nvmem-cells = <&macaddr_wifi_c>, <&calibration_wifi_5000>;
};
};