Consistently implement persistent port disable.
Ability was to be managed in the adapter via firmware via flash settings.
However, not all firmware images supported it. Uniformly support it
everywhere.
Signed-off-by: James Smart <James.Smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
#define FCP_XRI_ABORT_EVENT 0x20
#define ELS_XRI_ABORT_EVENT 0x40
#define ASYNC_EVENT 0x80
+#define LINK_DISABLED 0x100 /* Link disabled by user */
struct lpfc_dmabuf slim2p;
MAILBOX_t *mbox;
case LPFC_INIT_MBX_CMDS:
case LPFC_LINK_DOWN:
case LPFC_HBA_ERROR:
- len += snprintf(buf + len, PAGE_SIZE-len, "Link Down\n");
+ if (phba->hba_flag & LINK_DISABLED)
+ len += snprintf(buf + len, PAGE_SIZE-len,
+ "Link Down - User disabled\n");
+ else
+ len += snprintf(buf + len, PAGE_SIZE-len,
+ "Link Down\n");
break;
case LPFC_LINK_UP:
case LPFC_CLEAR_LA:
typedef int (*node_filter)(struct lpfc_nodelist *, void *);
struct fc_rport;
-void lpfc_dump_mem(struct lpfc_hba *, LPFC_MBOXQ_t *, uint16_t);
+void lpfc_down_link(struct lpfc_hba *, LPFC_MBOXQ_t *);
+void lpfc_sli_read_link_ste(struct lpfc_hba *);
+void lpfc_dump_mem(struct lpfc_hba *, LPFC_MBOXQ_t *, uint16_t, uint16_t);
void lpfc_dump_wakeup_param(struct lpfc_hba *, LPFC_MBOXQ_t *);
void lpfc_dump_static_vport(struct lpfc_hba *, LPFC_MBOXQ_t *, uint16_t);
int lpfc_dump_fcoe_param(struct lpfc_hba *, struct lpfcMboxq *);
int lpfc_sli_issue_iocb(struct lpfc_hba *, uint32_t,
struct lpfc_iocbq *, uint32_t);
void lpfc_sli_pcimem_bcopy(void *, void *, uint32_t);
+void lpfc_sli_bemem_bcopy(void *, void *, uint32_t);
void lpfc_sli_abort_iocb_ring(struct lpfc_hba *, struct lpfc_sli_ring *);
void lpfc_sli_flush_fcp_rings(struct lpfc_hba *);
int lpfc_sli_ringpostbuf_put(struct lpfc_hba *, struct lpfc_sli_ring *,
#define DMP_VPORT_REGION_SIZE 0x200
#define DMP_MBOX_OFFSET_WORD 0x5
-#define DMP_REGION_FCOEPARAM 0x17 /* fcoe param region */
-#define DMP_FCOEPARAM_RGN_SIZE 0x400
+#define DMP_REGION_23 0x17 /* fcoe param and port state region */
+#define DMP_RGN23_SIZE 0x400
#define WAKE_UP_PARMS_REGION_ID 4
#define WAKE_UP_PARMS_WORD_SIZE 15
goto out_free_mbox;
do {
- lpfc_dump_mem(phba, pmb, offset);
+ lpfc_dump_mem(phba, pmb, offset, DMP_REGION_VPD);
rc = lpfc_sli_issue_mbox(phba, pmb, MBX_POLL);
if (rc != MBX_SUCCESS) {
return -EIO;
}
+ /* Check if the port is disabled */
+ lpfc_sli_read_link_ste(phba);
+
/* Reset the DFT_HBA_Q_DEPTH to the max xri */
if (phba->cfg_hba_queue_depth > (mb->un.varRdConfig.max_xri+1))
phba->cfg_hba_queue_depth =
/* Set up error attention (ERATT) polling timer */
mod_timer(&phba->eratt_poll, jiffies + HZ * LPFC_ERATT_POLL_INTERVAL);
- lpfc_init_link(phba, pmb, phba->cfg_topology, phba->cfg_link_speed);
- pmb->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
- lpfc_set_loopback_flag(phba);
- rc = lpfc_sli_issue_mbox(phba, pmb, MBX_NOWAIT);
- if (rc != MBX_SUCCESS) {
- lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ /* Check if the port is disabled */
+ lpfc_sli_read_serdes_param(phba);
+
+ if (phba->hba_flag & LINK_DISABLED) {
+ lpfc_printf_log(phba,
+ KERN_ERR, LOG_INIT,
+ "2598 Adapter Link is disabled.\n");
+ lpfc_down_link(phba, pmb);
+ pmb->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
+ rc = lpfc_sli_issue_mbox(phba, pmb, MBX_NOWAIT);
+ if ((rc != MBX_SUCCESS) && (rc != MBX_BUSY)) {
+ lpfc_printf_log(phba,
+ KERN_ERR, LOG_INIT,
+ "2599 Adapter failed to issue DOWN_LINK"
+ " mbox command rc 0x%x\n", rc);
+
+ mempool_free(pmb, phba->mbox_mem_pool);
+ return -EIO;
+ }
+ } else {
+ lpfc_init_link(phba, pmb, phba->cfg_topology,
+ phba->cfg_link_speed);
+ pmb->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
+ lpfc_set_loopback_flag(phba);
+ rc = lpfc_sli_issue_mbox(phba, pmb, MBX_NOWAIT);
+ if (rc != MBX_SUCCESS) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"0454 Adapter failed to init, mbxCmd x%x "
"INIT_LINK, mbxStatus x%x\n",
mb->mbxCommand, mb->mbxStatus);
- /* Clear all interrupt enable conditions */
- writel(0, phba->HCregaddr);
- readl(phba->HCregaddr); /* flush */
- /* Clear all pending interrupts */
- writel(0xffffffff, phba->HAregaddr);
- readl(phba->HAregaddr); /* flush */
+ /* Clear all interrupt enable conditions */
+ writel(0, phba->HCregaddr);
+ readl(phba->HCregaddr); /* flush */
+ /* Clear all pending interrupts */
+ writel(0xffffffff, phba->HAregaddr);
+ readl(phba->HAregaddr); /* flush */
- phba->link_state = LPFC_HBA_ERROR;
- if (rc != MBX_BUSY)
- mempool_free(pmb, phba->mbox_mem_pool);
- return -EIO;
+ phba->link_state = LPFC_HBA_ERROR;
+ if (rc != MBX_BUSY)
+ mempool_free(pmb, phba->mbox_mem_pool);
+ return -EIO;
+ }
}
/* MBOX buffer will be freed in mbox compl */
pmb = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
}
/**
- * lpfc_dump_mem - Prepare a mailbox command for retrieving HBA's VPD memory
+ * lpfc_down_link - Bring down HBAs link.
* @phba: pointer to lpfc hba data structure.
* @pmb: pointer to the driver internal queue element for mailbox command.
- * @offset: offset for dumping VPD memory mailbox command.
+ *
+ * This routine prepares a mailbox command to bring down HBA link.
+ **/
+void
+lpfc_down_link(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
+{
+ MAILBOX_t *mb;
+ memset(pmb, 0, sizeof(LPFC_MBOXQ_t));
+ mb = &pmb->u.mb;
+ mb->mbxCommand = MBX_DOWN_LINK;
+ mb->mbxOwner = OWN_HOST;
+}
+
+/**
+ * lpfc_dump_mem - Prepare a mailbox command for reading a region.
+ * @phba: pointer to lpfc hba data structure.
+ * @pmb: pointer to the driver internal queue element for mailbox command.
+ * @offset: offset into the region.
+ * @region_id: config region id.
*
* The dump mailbox command provides a method for the device driver to obtain
* various types of information from the HBA device.
*
- * This routine prepares the mailbox command for dumping HBA Vital Product
- * Data (VPD) memory. This mailbox command is to be used for retrieving a
- * portion (DMP_RSP_SIZE bytes) of a HBA's VPD from the HBA at an address
- * offset specified by the offset parameter.
+ * This routine prepares the mailbox command for dumping HBA's config region.
**/
void
-lpfc_dump_mem(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb, uint16_t offset)
+lpfc_dump_mem(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb, uint16_t offset,
+ uint16_t region_id)
{
MAILBOX_t *mb;
void *ctx;
mb->un.varDmp.cv = 1;
mb->un.varDmp.type = DMP_NV_PARAMS;
mb->un.varDmp.entry_index = offset;
- mb->un.varDmp.region_id = DMP_REGION_VPD;
+ mb->un.varDmp.region_id = region_id;
mb->un.varDmp.word_cnt = (DMP_RSP_SIZE / sizeof (uint32_t));
mb->un.varDmp.co = 0;
mb->un.varDmp.resp_offset = 0;
mb->mbxCommand = MBX_DUMP_MEMORY;
mb->un.varDmp.type = DMP_NV_PARAMS;
- mb->un.varDmp.region_id = DMP_REGION_FCOEPARAM;
- mb->un.varDmp.sli4_length = DMP_FCOEPARAM_RGN_SIZE;
+ mb->un.varDmp.region_id = DMP_REGION_23;
+ mb->un.varDmp.sli4_length = DMP_RGN23_SIZE;
mb->un.varWords[3] = putPaddrLow(mp->phys);
mb->un.varWords[4] = putPaddrHigh(mp->phys);
return 0;
return -EIO;
}
data_length = mqe->un.mb_words[5];
- if (data_length > DMP_FCOEPARAM_RGN_SIZE) {
+ if (data_length > DMP_RGN23_SIZE) {
lpfc_mbuf_free(phba, mp->virt, mp->phys);
kfree(mp);
return -EIO;
}
+/**
+ * lpfc_sli_bemem_bcopy - SLI memory copy function
+ * @srcp: Source memory pointer.
+ * @destp: Destination memory pointer.
+ * @cnt: Number of words required to be copied.
+ *
+ * This function is used for copying data between a data structure
+ * with big endian representation to local endianness.
+ * This function can be called with or without lock.
+ **/
+void
+lpfc_sli_bemem_bcopy(void *srcp, void *destp, uint32_t cnt)
+{
+ uint32_t *src = srcp;
+ uint32_t *dest = destp;
+ uint32_t ldata;
+ int i;
+
+ for (i = 0; i < (int)cnt; i += sizeof(uint32_t)) {
+ ldata = *src;
+ ldata = be32_to_cpu(ldata);
+ *dest = ldata;
+ src++;
+ dest++;
+ }
+}
+
/**
* lpfc_sli_ringpostbuf_put - Function to add a buffer to postbufq
* @phba: Pointer to HBA context object.
error = 0;
return error;
}
+
+/**
+ * lpfc_sli_read_link_ste - Read region 23 to decide if link is disabled.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This function read region 23 and parse TLV for port status to
+ * decide if the user disaled the port. If the TLV indicates the
+ * port is disabled, the hba_flag is set accordingly.
+ **/
+void
+lpfc_sli_read_link_ste(struct lpfc_hba *phba)
+{
+ LPFC_MBOXQ_t *pmb = NULL;
+ MAILBOX_t *mb;
+ uint8_t *rgn23_data = NULL;
+ uint32_t offset = 0, data_size, sub_tlv_len, tlv_offset;
+ int rc;
+
+ pmb = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+ if (!pmb) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "2600 lpfc_sli_read_serdes_param failed to"
+ " allocate mailbox memory\n");
+ goto out;
+ }
+ mb = &pmb->u.mb;
+
+ /* Get adapter Region 23 data */
+ rgn23_data = kzalloc(DMP_RGN23_SIZE, GFP_KERNEL);
+ if (!rgn23_data)
+ goto out;
+
+ do {
+ lpfc_dump_mem(phba, pmb, offset, DMP_REGION_23);
+ rc = lpfc_sli_issue_mbox(phba, pmb, MBX_POLL);
+
+ if (rc != MBX_SUCCESS) {
+ lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+ "2601 lpfc_sli_read_link_ste failed to"
+ " read config region 23 rc 0x%x Status 0x%x\n",
+ rc, mb->mbxStatus);
+ mb->un.varDmp.word_cnt = 0;
+ }
+ /*
+ * dump mem may return a zero when finished or we got a
+ * mailbox error, either way we are done.
+ */
+ if (mb->un.varDmp.word_cnt == 0)
+ break;
+ if (mb->un.varDmp.word_cnt > DMP_RGN23_SIZE - offset)
+ mb->un.varDmp.word_cnt = DMP_RGN23_SIZE - offset;
+
+ lpfc_sli_pcimem_bcopy(((uint8_t *)mb) + DMP_RSP_OFFSET,
+ rgn23_data + offset,
+ mb->un.varDmp.word_cnt);
+ offset += mb->un.varDmp.word_cnt;
+ } while (mb->un.varDmp.word_cnt && offset < DMP_RGN23_SIZE);
+
+ data_size = offset;
+ offset = 0;
+
+ if (!data_size)
+ goto out;
+
+ /* Check the region signature first */
+ if (memcmp(&rgn23_data[offset], LPFC_REGION23_SIGNATURE, 4)) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "2619 Config region 23 has bad signature\n");
+ goto out;
+ }
+ offset += 4;
+
+ /* Check the data structure version */
+ if (rgn23_data[offset] != LPFC_REGION23_VERSION) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "2620 Config region 23 has bad version\n");
+ goto out;
+ }
+ offset += 4;
+
+ /* Parse TLV entries in the region */
+ while (offset < data_size) {
+ if (rgn23_data[offset] == LPFC_REGION23_LAST_REC)
+ break;
+ /*
+ * If the TLV is not driver specific TLV or driver id is
+ * not linux driver id, skip the record.
+ */
+ if ((rgn23_data[offset] != DRIVER_SPECIFIC_TYPE) ||
+ (rgn23_data[offset + 2] != LINUX_DRIVER_ID) ||
+ (rgn23_data[offset + 3] != 0)) {
+ offset += rgn23_data[offset + 1] * 4 + 4;
+ continue;
+ }
+
+ /* Driver found a driver specific TLV in the config region */
+ sub_tlv_len = rgn23_data[offset + 1] * 4;
+ offset += 4;
+ tlv_offset = 0;
+
+ /*
+ * Search for configured port state sub-TLV.
+ */
+ while ((offset < data_size) &&
+ (tlv_offset < sub_tlv_len)) {
+ if (rgn23_data[offset] == LPFC_REGION23_LAST_REC) {
+ offset += 4;
+ tlv_offset += 4;
+ break;
+ }
+ if (rgn23_data[offset] != PORT_STE_TYPE) {
+ offset += rgn23_data[offset + 1] * 4 + 4;
+ tlv_offset += rgn23_data[offset + 1] * 4 + 4;
+ continue;
+ }
+
+ /* This HBA contains PORT_STE configured */
+ if (!rgn23_data[offset + 2])
+ phba->hba_flag |= LINK_DISABLED;
+
+ goto out;
+ }
+ }
+out:
+ if (pmb)
+ mempool_free(pmb, phba->mbox_mem_pool);
+ kfree(rgn23_data);
+ return;
+}
#define LPFC_REGION23_SIGNATURE "RG23"
#define LPFC_REGION23_VERSION 1
#define LPFC_REGION23_LAST_REC 0xff
+#define DRIVER_SPECIFIC_TYPE 0xA2
+#define LINUX_DRIVER_ID 0x20
+#define PORT_STE_TYPE 0x1
+
struct lpfc_fip_param_hdr {
uint8_t type;
#define FCOE_PARAM_TYPE 0xA0
projects / openwrt / staging / blogic.git / commitdiff