Normally display is black on white background; define
CONFIG_SYS_WHITE_ON_BLACK to get it inverted.
-
+ CONFIG_LCD_ALIGNMENT
+
+ Normally the LCD is page-aligned (tyically 4KB). If this is
+ defined then the LCD will be aligned to this value instead.
+ For ARM it is sometimes useful to use MMU_SECTION_SIZE
+ here, since it is cheaper to change data cache settings on
+ a per-section basis.
+
+ CONFIG_CONSOLE_SCROLL_LINES
+
+ When the console need to be scrolled, this is the number of
+ lines to scroll by. It defaults to 1. Increasing this makes
+ the console jump but can help speed up operation when scrolling
+ is slow.
+
+ CONFIG_LCD_BMP_RLE8
+
+ Support drawing of RLE8-compressed bitmaps on the LCD.
+
+ CONFIG_I2C_EDID
+
+ Enables an 'i2c edid' command which can read EDID
+ information over I2C from an attached LCD display.
+
-
- Splash Screen Support: CONFIG_SPLASH_SCREEN
If this option is set, the environment is checked for
return aclk_66;
}
+int exynos5_set_epll_clk(unsigned long rate)
+{
+ unsigned int epll_con, epll_con_k;
+ unsigned int i;
+ unsigned int lockcnt;
+ unsigned int start;
+ struct exynos5_clock *clk =
+ (struct exynos5_clock *)samsung_get_base_clock();
+
+ epll_con = readl(&clk->epll_con0);
+ epll_con &= ~((EPLL_CON0_LOCK_DET_EN_MASK <<
+ EPLL_CON0_LOCK_DET_EN_SHIFT) |
+ EPLL_CON0_MDIV_MASK << EPLL_CON0_MDIV_SHIFT |
+ EPLL_CON0_PDIV_MASK << EPLL_CON0_PDIV_SHIFT |
+ EPLL_CON0_SDIV_MASK << EPLL_CON0_SDIV_SHIFT);
+
+ for (i = 0; i < ARRAY_SIZE(exynos5_epll_div); i++) {
+ if (exynos5_epll_div[i].freq_out == rate)
+ break;
+ }
+
+ if (i == ARRAY_SIZE(exynos5_epll_div))
+ return -1;
+
+ epll_con_k = exynos5_epll_div[i].k_dsm << 0;
+ epll_con |= exynos5_epll_div[i].en_lock_det <<
+ EPLL_CON0_LOCK_DET_EN_SHIFT;
+ epll_con |= exynos5_epll_div[i].m_div << EPLL_CON0_MDIV_SHIFT;
+ epll_con |= exynos5_epll_div[i].p_div << EPLL_CON0_PDIV_SHIFT;
+ epll_con |= exynos5_epll_div[i].s_div << EPLL_CON0_SDIV_SHIFT;
+
+ /*
+ * Required period ( in cycles) to genarate a stable clock output.
+ * The maximum clock time can be up to 3000 * PDIV cycles of PLLs
+ * frequency input (as per spec)
+ */
+ lockcnt = 3000 * exynos5_epll_div[i].p_div;
+
+ writel(lockcnt, &clk->epll_lock);
+ writel(epll_con, &clk->epll_con0);
+ writel(epll_con_k, &clk->epll_con1);
+
+ start = get_timer(0);
+
+ while (!(readl(&clk->epll_con0) &
+ (0x1 << EXYNOS5_EPLLCON0_LOCKED_SHIFT))) {
+ if (get_timer(start) > TIMEOUT_EPLL_LOCK) {
+ debug("%s: Timeout waiting for EPLL lock\n", __func__);
+ return -1;
+ }
+ }
+ return 0;
+}
+
+void exynos5_set_i2s_clk_source(void)
+{
+ struct exynos5_clock *clk =
+ (struct exynos5_clock *)samsung_get_base_clock();
+
+ clrsetbits_le32(&clk->src_peric1, AUDIO1_SEL_MASK,
+ (CLK_SRC_SCLK_EPLL));
+}
+
+int exynos5_set_i2s_clk_prescaler(unsigned int src_frq,
+ unsigned int dst_frq)
+{
+ struct exynos5_clock *clk =
+ (struct exynos5_clock *)samsung_get_base_clock();
+ unsigned int div;
+
+ if ((dst_frq == 0) || (src_frq == 0)) {
+ debug("%s: Invalid requency input for prescaler\n", __func__);
+ debug("src frq = %d des frq = %d ", src_frq, dst_frq);
+ return -1;
+ }
+
+ div = (src_frq / dst_frq);
+ if (div > AUDIO_1_RATIO_MASK) {
+ debug("%s: Frequency ratio is out of range\n", __func__);
+ debug("src frq = %d des frq = %d ", src_frq, dst_frq);
+ return -1;
+ }
+ clrsetbits_le32(&clk->div_peric4, AUDIO_1_RATIO_MASK,
+ (div & AUDIO_1_RATIO_MASK));
+ return 0;
+}
+
+/**
+ * Linearly searches for the most accurate main and fine stage clock scalars
+ * (divisors) for a specified target frequency and scalar bit sizes by checking
+ * all multiples of main_scalar_bits values. Will always return scalars up to or
+ * slower than target.
+ *
+ * @param main_scalar_bits Number of main scalar bits, must be > 0 and < 32
+ * @param fine_scalar_bits Number of fine scalar bits, must be > 0 and < 32
+ * @param input_freq Clock frequency to be scaled in Hz
+ * @param target_freq Desired clock frequency in Hz
+ * @param best_fine_scalar Pointer to store the fine stage divisor
+ *
+ * @return best_main_scalar Main scalar for desired frequency or -1 if none
+ * found
+ */
+static int clock_calc_best_scalar(unsigned int main_scaler_bits,
+ unsigned int fine_scalar_bits, unsigned int input_rate,
+ unsigned int target_rate, unsigned int *best_fine_scalar)
+{
+ int i;
+ int best_main_scalar = -1;
+ unsigned int best_error = target_rate;
+ const unsigned int cap = (1 << fine_scalar_bits) - 1;
+ const unsigned int loops = 1 << main_scaler_bits;
+
+ debug("Input Rate is %u, Target is %u, Cap is %u\n", input_rate,
+ target_rate, cap);
+
+ assert(best_fine_scalar != NULL);
+ assert(main_scaler_bits <= fine_scalar_bits);
+
+ *best_fine_scalar = 1;
+
+ if (input_rate == 0 || target_rate == 0)
+ return -1;
+
+ if (target_rate >= input_rate)
+ return 1;
+
+ for (i = 1; i <= loops; i++) {
+ const unsigned int effective_div = max(min(input_rate / i /
+ target_rate, cap), 1);
+ const unsigned int effective_rate = input_rate / i /
+ effective_div;
+ const int error = target_rate - effective_rate;
+
+ debug("%d|effdiv:%u, effrate:%u, error:%d\n", i, effective_div,
+ effective_rate, error);
+
+ if (error >= 0 && error <= best_error) {
+ best_error = error;
+ best_main_scalar = i;
+ *best_fine_scalar = effective_div;
+ }
+ }
+
+ return best_main_scalar;
+}
+
+static int exynos5_set_spi_clk(enum periph_id periph_id,
+ unsigned int rate)
+{
+ struct exynos5_clock *clk =
+ (struct exynos5_clock *)samsung_get_base_clock();
+ int main;
+ unsigned int fine;
+ unsigned shift, pre_shift;
+ unsigned mask = 0xff;
+ u32 *reg;
+
+ main = clock_calc_best_scalar(4, 8, 400000000, rate, &fine);
+ if (main < 0) {
+ debug("%s: Cannot set clock rate for periph %d",
+ __func__, periph_id);
+ return -1;
+ }
+ main = main - 1;
+ fine = fine - 1;
+
+ switch (periph_id) {
+ case PERIPH_ID_SPI0:
+ reg = &clk->div_peric1;
+ shift = 0;
+ pre_shift = 8;
+ break;
+ case PERIPH_ID_SPI1:
+ reg = &clk->div_peric1;
+ shift = 16;
+ pre_shift = 24;
+ break;
+ case PERIPH_ID_SPI2:
+ reg = &clk->div_peric2;
+ shift = 0;
+ pre_shift = 8;
+ break;
+ case PERIPH_ID_SPI3:
+ reg = &clk->sclk_div_isp;
+ shift = 0;
+ pre_shift = 4;
+ break;
+ case PERIPH_ID_SPI4:
+ reg = &clk->sclk_div_isp;
+ shift = 12;
+ pre_shift = 16;
+ break;
+ default:
+ debug("%s: Unsupported peripheral ID %d\n", __func__,
+ periph_id);
+ return -1;
+ }
+ clrsetbits_le32(reg, mask << shift, (main & mask) << shift);
+ clrsetbits_le32(reg, mask << pre_shift, (fine & mask) << pre_shift);
+
+ return 0;
++
+ static unsigned long exynos4_get_i2c_clk(void)
+ {
+ struct exynos4_clock *clk =
+ (struct exynos4_clock *)samsung_get_base_clock();
+ unsigned long sclk, aclk_100;
+ unsigned int ratio;
+
+ sclk = get_pll_clk(APLL);
+
+ ratio = (readl(&clk->div_top)) >> 4;
+ ratio &= 0xf;
+ aclk_100 = sclk / (ratio + 1);
+ return aclk_100;
}
unsigned long get_pll_clk(int pllreg)
#include <asm/arch/adc.h>
#include <asm/arch/gpio.h>
#include <asm/arch/mmc.h>
+#include <asm/arch/pinmux.h>
+#include <pmic.h>
+#include <usb/s3c_udc.h>
+#include <asm/arch/cpu.h>
+#include <max8998_pmic.h>
+#include <asm/arch/watchdog.h>
+#include <libtizen.h>
+#include <ld9040.h>
+ #include <power/pmic.h>
+ #include <usb/s3c_udc.h>
+ #include <asm/arch/cpu.h>
+ #include <power/max8998_pmic.h>
DECLARE_GLOBAL_DATA_PTR;
--- /dev/null
- p->hw.i2c.tx_num = 3;
- p->bus = bus;
+ /*
+ * Copyright (C) 2011 Samsung Electronics
+ * Lukasz Majewski <l.majewski@samsung.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+ #include <common.h>
+ #include <spi.h>
+ #include <power/pmic.h>
+ #include <fsl_pmic.h>
+ #include <errno.h>
+
++#if defined(CONFIG_PMIC_FSL_MC13892)
++#define FSL_PMIC_I2C_LENGTH 3
++#elif defined(CONFIG_PMIC_FSL_MC34704)
++#define FSL_PMIC_I2C_LENGTH 1
++#endif
++
+ #if defined(CONFIG_POWER_SPI)
+ static u32 pmic_spi_prepare_tx(u32 reg, u32 *val, u32 write)
+ {
+ return (write << 31) | (reg << 25) | (*val & 0x00FFFFFF);
+ }
+ #endif
+
+ int pmic_init(unsigned char bus)
+ {
+ static const char name[] = "FSL_PMIC";
+ struct pmic *p = pmic_alloc();
+
+ if (!p) {
+ printf("%s: POWER allocation error!\n", __func__);
+ return -ENOMEM;
+ }
+
+ p->name = name;
+ p->number_of_regs = PMIC_NUM_OF_REGS;
+
+ #if defined(CONFIG_POWER_SPI)
+ p->interface = PMIC_SPI;
+ p->bus = CONFIG_FSL_PMIC_BUS;
+ p->hw.spi.cs = CONFIG_FSL_PMIC_CS;
+ p->hw.spi.clk = CONFIG_FSL_PMIC_CLK;
+ p->hw.spi.mode = CONFIG_FSL_PMIC_MODE;
+ p->hw.spi.bitlen = CONFIG_FSL_PMIC_BITLEN;
+ p->hw.spi.flags = SPI_XFER_BEGIN | SPI_XFER_END;
+ p->hw.spi.prepare_tx = pmic_spi_prepare_tx;
+ #elif defined(CONFIG_POWER_I2C)
+ p->interface = PMIC_I2C;
+ p->hw.i2c.addr = CONFIG_SYS_FSL_PMIC_I2C_ADDR;
++ p->hw.i2c.tx_num = FSL_PMIC_I2C_LENGTH;
++ p->bus = I2C_PMIC;
+ #else
+ #error "You must select CONFIG_POWER_SPI or CONFIG_PMIC_I2C"
+ #endif
+
+ return 0;
+ }
COBJS-$(CONFIG_FSL_DIU_FB) += fsl_diu_fb.o videomodes.o
COBJS-$(CONFIG_S6E8AX0) += s6e8ax0.o
COBJS-$(CONFIG_S6E63D6) += s6e63d6.o
+COBJS-$(CONFIG_LD9040) += ld9040.o
COBJS-$(CONFIG_SED156X) += sed156x.o
COBJS-$(CONFIG_VIDEO_AMBA) += amba.o
+ COBJS-$(CONFIG_VIDEO_COREBOOT) += coreboot_fb.o
COBJS-$(CONFIG_VIDEO_CT69000) += ct69000.o videomodes.o
COBJS-$(CONFIG_VIDEO_DA8XX) += da8xx-fb.o videomodes.o
COBJS-$(CONFIG_VIDEO_MB862xx) += mb862xx.o videomodes.o
#define CONFIG_SYS_I2C_SPEED 100000
/* PMIC Configs */
- #define CONFIG_PMIC
- #define CONFIG_PMIC_I2C
- #define CONFIG_PMIC_FSL
+ #define CONFIG_POWER
+ #define CONFIG_POWER_I2C
+ #define CONFIG_POWER_FSL
#define CONFIG_SYS_FSL_PMIC_I2C_ADDR 8
+#define CONFIG_PMIC_FSL_MC13892
#define CONFIG_RTC_MC13XXX
/* MMC Configs */
#define CONFIG_TEGRA_KEYBOARD
#define CONFIG_KEYBOARD
- #undef TEGRA_DEVICE_SETTINGS
- #define TEGRA_DEVICE_SETTINGS "stdin=serial,tegra-kbc\0" \
- "stdout=serial,lcd\0" \
- "stderr=serial,lcd\0"
+ /* USB keyboard */
+ #define CONFIG_USB_KEYBOARD
-#include "tegra-common-post.h"
+/* LCD support */
+#define CONFIG_LCD
+#define CONFIG_PWM_TEGRA
+#define CONFIG_VIDEO_TEGRA
+#define LCD_BPP LCD_COLOR16
+#define CONFIG_SYS_WHITE_ON_BLACK
+#define CONFIG_CONSOLE_SCROLL_LINES 10
/* NAND support */
#define CONFIG_CMD_NAND
#define CONFIG_I2C_MULTI_BUS
#define CONFIG_MAX_I2C_NUM 8
#define CONFIG_SYS_I2C_SLAVE 0x0
+ #define CONFIG_I2C_EDID
+/* PMIC */
+#define CONFIG_PMIC
+#define CONFIG_PMIC_I2C
+#define CONFIG_PMIC_MAX77686
+
+/* SPI */
+#define CONFIG_ENV_IS_IN_SPI_FLASH
+#define CONFIG_SPI_FLASH
+
+#ifdef CONFIG_SPI_FLASH
+#define CONFIG_EXYNOS_SPI
+#define CONFIG_CMD_SF
+#define CONFIG_CMD_SPI
+#define CONFIG_SPI_FLASH_WINBOND
+#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
+#define CONFIG_SF_DEFAULT_SPEED 50000000
+#define EXYNOS5_SPI_NUM_CONTROLLERS 5
+#endif
+
+#ifdef CONFIG_ENV_IS_IN_SPI_FLASH
+#define CONFIG_ENV_SPI_MODE SPI_MODE_0
+#define CONFIG_ENV_SECT_SIZE CONFIG_ENV_SIZE
+#define CONFIG_ENV_SPI_BUS 1
+#define CONFIG_ENV_SPI_MAX_HZ 50000000
+#endif
+
/* Ethernet Controllor Driver */
#ifdef CONFIG_CMD_NET
#define CONFIG_SMC911X
"fdt_addr_r=0x02000000\0" \
"ramdisk_addr_r=0x02100000\0" \
- "stdout=serial\0" \
- "stderr=serial\0" \
+ #ifdef CONFIG_TEGRA_KEYBOARD
+ #define STDIN_KBD_KBC ",tegra-kbc"
+ #else
+ #define STDIN_KBD_KBC ""
+ #endif
+
+ #ifdef CONFIG_USB_KEYBOARD
+ #define STDIN_KBD_USB ",usbkbd"
+ #define CONFIG_SYS_USB_EVENT_POLL
+ #define CONFIG_PREBOOT "usb start"
+ #else
+ #define STDIN_KBD_USB ""
+ #endif
+
+ #define TEGRA_DEVICE_SETTINGS \
+ "stdin=serial" STDIN_KBD_KBC STDIN_KBD_USB "\0" \
++ "stdout=serial,lcd\0" \
++ "stderr=serial,lcd\0" \
+
#define CONFIG_EXTRA_ENV_SETTINGS \
TEGRA_DEVICE_SETTINGS \
MEM_LAYOUT_ENV_SETTINGS \
--- /dev/null
+ /*
+ * Copyright (C) 2011 Samsung Electronics
+ * Lukasz Majewski <l.majewski@samsung.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+ #ifndef __MAX8998_PMIC_H_
+ #define __MAX8998_PMIC_H_
+
+ /* MAX 8998 registers */
+ enum {
+ MAX8998_REG_IRQ1,
+ MAX8998_REG_IRQ2,
+ MAX8998_REG_IRQ3,
+ MAX8998_REG_IRQ4,
+ MAX8998_REG_IRQM1,
+ MAX8998_REG_IRQM2,
+ MAX8998_REG_IRQM3,
+ MAX8998_REG_IRQM4,
+ MAX8998_REG_STATUS1,
+ MAX8998_REG_STATUS2,
+ MAX8998_REG_STATUSM1,
+ MAX8998_REG_STATUSM2,
+ MAX8998_REG_CHGR1,
+ MAX8998_REG_CHGR2,
+ MAX8998_REG_LDO_ACTIVE_DISCHARGE1,
+ MAX8998_REG_LDO_ACTIVE_DISCHARGE2,
+ MAX8998_REG_BUCK_ACTIVE_DISCHARGE3,
+ MAX8998_REG_ONOFF1,
+ MAX8998_REG_ONOFF2,
+ MAX8998_REG_ONOFF3,
+ MAX8998_REG_ONOFF4,
+ MAX8998_REG_BUCK1_VOLTAGE1,
+ MAX8998_REG_BUCK1_VOLTAGE2,
+ MAX8998_REG_BUCK1_VOLTAGE3,
+ MAX8998_REG_BUCK1_VOLTAGE4,
+ MAX8998_REG_BUCK2_VOLTAGE1,
+ MAX8998_REG_BUCK2_VOLTAGE2,
+ MAX8998_REG_BUCK3,
+ MAX8998_REG_BUCK4,
+ MAX8998_REG_LDO2_LDO3,
+ MAX8998_REG_LDO4,
+ MAX8998_REG_LDO5,
+ MAX8998_REG_LDO6,
+ MAX8998_REG_LDO7,
+ MAX8998_REG_LDO8_LDO9,
+ MAX8998_REG_LDO10_LDO11,
+ MAX8998_REG_LDO12,
+ MAX8998_REG_LDO13,
+ MAX8998_REG_LDO14,
+ MAX8998_REG_LDO15,
+ MAX8998_REG_LDO16,
+ MAX8998_REG_LDO17,
+ MAX8998_REG_BKCHR,
+ MAX8998_REG_LBCNFG1,
+ MAX8998_REG_LBCNFG2,
+ PMIC_NUM_OF_REGS,
+ };
+
+ #define MAX8998_LDO3 (1 << 2)
+ #define MAX8998_LDO4 (1 << 1)
++#define MAX8998_LDO7 (1 << 6)
+ #define MAX8998_LDO8 (1 << 5)
++#define MAX8998_LDO17 (1 << 4)
+ #define MAX8998_SAFEOUT1 (1 << 4)
+
+ #define MAX8998_I2C_ADDR (0xCC >> 1)
+
+ enum { LDO_OFF, LDO_ON };
+
+ #endif /* __MAX8998_PMIC_H_ */
projects / project / bcm63xx / u-boot.git / commitdiff