PKG_NAME:=batctl
-PKG_VERSION:=2019.2
-PKG_RELEASE:=1
-PKG_HASH:=fb656208ff7d4cd8b1b422f60c9e6d8747302a347cbf6c199d7afa9b80f80ea3
+PKG_VERSION:=2019.3
+PKG_RELEASE:=0
+PKG_HASH:=2bd93fa14925a8dc63a67e64266c8ccd2fa3ac44b10253d93e6f8a630350070c
PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.gz
PKG_SOURCE_URL:=https://downloads.open-mesh.org/batman/releases/batman-adv-$(PKG_VERSION)
+++ /dev/null
-From: Sven Eckelmann <sven@narfation.org>
-Date: Thu, 13 Jun 2019 21:12:14 +0200
-Subject: batctl: Make vlan setting explicit
-
-The requirement to have a VLAN master device on top of the batadv mesh
-interface is artificially limiting the capabilities of batctl. Not all
-master devices in linux which register a VLAN are from type "vlan" and are
-only registering a single VLAN.
-
-For example VLAN aware bridges can create multiple VLANs. These require
-that the VLAN is identified using the VID and not the vlan device.
-
-Signed-off-by: Sven Eckelmann <sven@narfation.org>
-
-Forwarded: https://patchwork.open-mesh.org/patch/17947/
-
-diff --git a/ap_isolation.c b/ap_isolation.c
-index 71dcd00eac845d488c4969b17e1339f181c6c913..7c34649225dcc9cc557cc5bb4cbfa2343f8c0763 100644
---- a/ap_isolation.c
-+++ b/ap_isolation.c
-@@ -81,3 +81,8 @@ COMMAND_NAMED(SUBCOMMAND, ap_isolation, "ap", handle_sys_setting,
- COMMAND_FLAG_MESH_IFACE | COMMAND_FLAG_NETLINK,
- &batctl_settings_ap_isolation,
- "[0|1] \tdisplay or modify ap_isolation setting");
-+
-+COMMAND_NAMED(SUBCOMMAND_VID, ap_isolation, "ap", handle_sys_setting,
-+ COMMAND_FLAG_MESH_IFACE | COMMAND_FLAG_NETLINK,
-+ &batctl_settings_ap_isolation,
-+ "[0|1] \tdisplay or modify ap_isolation setting for vlan device or id");
-diff --git a/main.c b/main.c
-index 278683c6080e3ff4a9f3225931d0c5eb44f89595..6ca13ac0ec4c82ee969be04737a339fd702b52bd 100644
---- a/main.c
-+++ b/main.c
-@@ -28,48 +28,75 @@ extern const struct command *__stop___command[];
-
- static void print_usage(void)
- {
-- enum command_type type[] = {
-- SUBCOMMAND,
-- DEBUGTABLE,
-+ struct {
-+ const char *label;
-+ uint32_t types;
-+ } type[] = {
-+ {
-+ .label = "commands:\n",
-+ .types = BIT(SUBCOMMAND) |
-+ BIT(SUBCOMMAND_VID),
-+ },
-+ {
-+ .label = "debug tables: \tdisplay the corresponding debug table\n",
-+ .types = BIT(DEBUGTABLE),
-+ },
-+ };
-+ const char *default_prefixes[] = {
-+ "",
-+ NULL,
-+ };
-+ const char *vlan_prefixes[] = {
-+ "vlan <vdev> ",
-+ "vid <vid> ",
-+ NULL,
- };
- const struct command **p;
-- char buf[32];
-+ const char **prefixes;
-+ const char **prefix;
-+ char buf[64];
- size_t i;
-
- fprintf(stderr, "Usage: batctl [options] command|debug table [parameters]\n");
- fprintf(stderr, "options:\n");
-- fprintf(stderr, " \t-m mesh interface or VLAN created on top of a mesh interface (default 'bat0')\n");
-+ fprintf(stderr, " \t-m mesh interface (default 'bat0')\n");
- fprintf(stderr, " \t-h print this help (or 'batctl <command|debug table> -h' for the parameter help)\n");
- fprintf(stderr, " \t-v print version\n");
-
- for (i = 0; i < sizeof(type) / sizeof(*type); i++) {
- fprintf(stderr, "\n");
-
-- switch (type[i]) {
-- case SUBCOMMAND:
-- fprintf(stderr, "commands:\n");
-- break;
-- case DEBUGTABLE:
-- fprintf(stderr, "debug tables: \tdisplay the corresponding debug table\n");
-- break;
-- }
-+ fprintf(stderr, "%s", type[i].label);
-
- for (p = __start___command; p < __stop___command; p++) {
- const struct command *cmd = *p;
-
-- if (cmd->type != type[i])
-+ if (!(BIT(cmd->type) & type[i].types))
- continue;
-
- if (!cmd->usage)
- continue;
-
-- if (strcmp(cmd->name, cmd->abbr) == 0)
-- snprintf(buf, sizeof(buf), "%s", cmd->name);
-- else
-- snprintf(buf, sizeof(buf), "%s|%s", cmd->name,
-- cmd->abbr);
-+ switch (cmd->type) {
-+ case SUBCOMMAND_VID:
-+ prefixes = vlan_prefixes;
-+ break;
-+ default:
-+ prefixes = default_prefixes;
-+ break;
-+ }
-
-- fprintf(stderr, " \t%-27s%s\n", buf, cmd->usage);
-+ for (prefix = &prefixes[0]; *prefix; prefix++) {
-+ if (strcmp(cmd->name, cmd->abbr) == 0)
-+ snprintf(buf, sizeof(buf), "%s%s",
-+ *prefix, cmd->name);
-+ else
-+ snprintf(buf, sizeof(buf), "%s%s|%s",
-+ *prefix, cmd->name, cmd->abbr);
-+
-+ fprintf(stderr, " \t%-35s%s\n", buf,
-+ cmd->usage);
-+ }
- }
- }
- }
-@@ -93,13 +120,19 @@ static void version(void)
- exit(EXIT_SUCCESS);
- }
-
--static const struct command *find_command(const char *name)
-+static const struct command *find_command(struct state *state, const char *name)
- {
- const struct command **p;
-
- for (p = __start___command; p < __stop___command; p++) {
- const struct command *cmd = *p;
-
-+ if (state->vid >= 0 && cmd->type != SUBCOMMAND_VID)
-+ continue;
-+
-+ if (state->vid < 0 && cmd->type == SUBCOMMAND_VID)
-+ continue;
-+
- if (strcmp(cmd->name, name) == 0)
- return cmd;
-
-@@ -110,6 +143,51 @@ static const struct command *find_command(const char *name)
- return NULL;
- }
-
-+static int parse_dev_args(struct state *state, int argc, char *argv[])
-+{
-+ unsigned long vid;
-+ char *endptr;
-+
-+ /* not enough arguments to parse */
-+ if (argc < 2) {
-+ translate_mesh_iface(state);
-+ return 0;
-+ }
-+
-+ if (strcmp(argv[0], "vid") == 0) {
-+ if (argv[1] == '\0') {
-+ fprintf(stderr, "Error - unparsable vid\n");
-+ return -EINVAL;
-+ }
-+
-+ vid = strtoul(argv[1], &endptr, 0);
-+ if (!endptr || *endptr != '\0') {
-+ fprintf(stderr, "Error - unparsable vid\n");
-+ return -EINVAL;
-+ }
-+
-+ if (vid > 4095) {
-+ fprintf(stderr, "Error - too large vid (max 4095)\n");
-+ return -ERANGE;
-+ }
-+
-+ /* get mesh interface and overwrite vid afterwards */
-+ translate_mesh_iface(state);
-+ state->vid = vid;
-+
-+ return 2;
-+ } else if (strcmp(argv[0], "vlan") == 0) {
-+ state->arg_iface = argv[1];
-+ translate_mesh_iface(state);
-+
-+ return 2;
-+ } else {
-+ /* parse vlan as part of -m parameter */
-+ translate_mesh_iface(state);
-+ return 0;
-+ }
-+}
-+
- int main(int argc, char **argv)
- {
- const struct command *cmd;
-@@ -117,6 +195,7 @@ int main(int argc, char **argv)
- .arg_iface = mesh_dfl_iface,
- .cmd = NULL,
- };
-+ int dev_arguments;
- int opt;
- int ret;
-
-@@ -152,7 +231,15 @@ int main(int argc, char **argv)
- argc -= optind;
- optind = 0;
-
-- cmd = find_command(argv[0]);
-+ /* parse arguments to identify vlan, ... */
-+ dev_arguments = parse_dev_args(&state, argc, argv);
-+ if (dev_arguments < 0)
-+ goto err;
-+
-+ argv += dev_arguments;
-+ argc -= dev_arguments;
-+
-+ cmd = find_command(&state, argv[0]);
- if (!cmd) {
- fprintf(stderr,
- "Error - no valid command or debug table specified: %s\n",
-@@ -162,8 +249,6 @@ int main(int argc, char **argv)
-
- state.cmd = cmd;
-
-- translate_mesh_iface(&state);
--
- if (cmd->flags & COMMAND_FLAG_MESH_IFACE &&
- check_mesh_iface(&state) < 0) {
- fprintf(stderr,
-diff --git a/main.h b/main.h
-index 1a4701513c49ad8974b9c9189619f5dde622acd4..1d952610aefb8367bd52e24bea8c04c3d70b94ea 100644
---- a/main.h
-+++ b/main.h
-@@ -58,6 +58,7 @@ enum command_flags {
-
- enum command_type {
- SUBCOMMAND,
-+ SUBCOMMAND_VID,
- DEBUGTABLE,
- };
-
-@@ -84,7 +85,7 @@ struct command {
- };
-
- #define COMMAND_NAMED(_type, _name, _abbr, _handler, _flags, _arg, _usage) \
-- static const struct command command_ ## _name = { \
-+ static const struct command command_ ## _name ## _ ## _type = { \
- .type = (_type), \
- .name = (#_name), \
- .abbr = _abbr, \
-@@ -93,8 +94,8 @@ struct command {
- .arg = (_arg), \
- .usage = (_usage), \
- }; \
-- static const struct command *__command_ ## _name \
-- __attribute__((__used__)) __attribute__ ((__section__ ("__command"))) = &command_ ## _name
-+ static const struct command *__command_ ## _name ## _ ## _type \
-+ __attribute__((__used__)) __attribute__ ((__section__ ("__command"))) = &command_ ## _name ## _ ## _type
-
- #define COMMAND(_type, _handler, _abbr, _flags, _arg, _usage) \
- COMMAND_NAMED(_type, _handler, _abbr, _handler, _flags, _arg, _usage)
-diff --git a/man/batctl.8 b/man/batctl.8
-index 0b430313075b5a7a4c796eba0867954e10061002..acb4288c4e6f59b322d20631ef8e3aee6f2215e5 100644
---- a/man/batctl.8
-+++ b/man/batctl.8
-@@ -68,7 +68,7 @@ free all attached interfaces and remove batman-adv interface.
- If no parameter is given the current originator interval setting is displayed otherwise the parameter is used to set the
- originator interval. The interval is in units of milliseconds.
- .br
--.IP "\fBap_isolation\fP|\fBap\fP [\fB0\fP|\fB1\fP]"
-+.IP "[\fBvlan <vdev>\fP|\fBvid <vid>\fP] \fBap_isolation\fP|\fBap\fP [\fB0\fP|\fB1\fP]"
- If no parameter is given the current ap isolation setting is displayed. Otherwise the parameter is used to enable or
- disable ap isolation. This command can be used in conjunction with "\-m" option to target per VLAN configurations.
- .br
-diff --git a/sys.c b/sys.c
-index 39123db87d391b8898b7454eba7708515bfb3c78..f19719cfad61f36f2a5c1078305de83eb5be142a 100644
---- a/sys.c
-+++ b/sys.c
-@@ -141,9 +141,35 @@ int sys_simple_print_boolean(struct nl_msg *msg, void *arg,
-
- static void settings_usage(struct state *state)
- {
-- fprintf(stderr, "Usage: batctl [options] %s|%s [parameters] %s\n",
-- state->cmd->name, state->cmd->abbr,
-- state->cmd->usage ? state->cmd->usage : "");
-+ const char *default_prefixes[] = {
-+ "",
-+ NULL,
-+ };
-+ const char *vlan_prefixes[] = {
-+ "vlan <vdev> ",
-+ "vid <vid> ",
-+ NULL,
-+ };
-+ const char *linestart = "Usage:";
-+ const char **prefixes;
-+ const char **prefix;
-+
-+ switch (state->cmd->type) {
-+ case SUBCOMMAND_VID:
-+ prefixes = vlan_prefixes;
-+ break;
-+ default:
-+ prefixes = default_prefixes;
-+ break;
-+ }
-+
-+ for (prefix = &prefixes[0]; *prefix; prefix++) {
-+ fprintf(stderr, "%s batctl [options] %s%s|%s [parameters] %s\n",
-+ linestart, *prefix, state->cmd->name, state->cmd->abbr,
-+ state->cmd->usage ? state->cmd->usage : "");
-+
-+ linestart = " ";
-+ }
-
- fprintf(stderr, "parameters:\n");
- fprintf(stderr, " \t -h print this help\n");
+++ /dev/null
-From: Sven Eckelmann <sven@narfation.org>
-Date: Thu, 13 Jun 2019 21:12:15 +0200
-Subject: batctl: Integrate hardif setting framework
-
-batctl currently supports settings which are either mesh interface or vlan
-specific. But B.A.T.M.A.N. V introduced two additional settings which are
-hard (slave) interface specific.
-
-To support these, an additional command prefix called hardif is implemented
-for some sysfs commands:
-
- $ batctl -m bat0 hardif eth0 ...
-
-Signed-off-by: Sven Eckelmann <sven@narfation.org>
-
-Forwarded: https://patchwork.open-mesh.org/patch/17948/
-
-diff --git a/main.c b/main.c
-index 6ca13ac0ec4c82ee969be04737a339fd702b52bd..c806dbf4373fd082ff368cba391bdf14eebf4eae 100644
---- a/main.c
-+++ b/main.c
-@@ -35,7 +35,8 @@ static void print_usage(void)
- {
- .label = "commands:\n",
- .types = BIT(SUBCOMMAND) |
-- BIT(SUBCOMMAND_VID),
-+ BIT(SUBCOMMAND_VID) |
-+ BIT(SUBCOMMAND_HIF),
- },
- {
- .label = "debug tables: \tdisplay the corresponding debug table\n",
-@@ -51,6 +52,10 @@ static void print_usage(void)
- "vid <vid> ",
- NULL,
- };
-+ const char *hardif_prefixes[] = {
-+ "hardif <netdev> ",
-+ NULL,
-+ };
- const struct command **p;
- const char **prefixes;
- const char **prefix;
-@@ -81,6 +86,9 @@ static void print_usage(void)
- case SUBCOMMAND_VID:
- prefixes = vlan_prefixes;
- break;
-+ case SUBCOMMAND_HIF:
-+ prefixes = hardif_prefixes;
-+ break;
- default:
- prefixes = default_prefixes;
- break;
-@@ -133,6 +141,12 @@ static const struct command *find_command(struct state *state, const char *name)
- if (state->vid < 0 && cmd->type == SUBCOMMAND_VID)
- continue;
-
-+ if (state->hif > 0 && cmd->type != SUBCOMMAND_HIF)
-+ continue;
-+
-+ if (state->hif == 0 && cmd->type == SUBCOMMAND_HIF)
-+ continue;
-+
- if (strcmp(cmd->name, name) == 0)
- return cmd;
-
-@@ -180,6 +194,18 @@ static int parse_dev_args(struct state *state, int argc, char *argv[])
- state->arg_iface = argv[1];
- translate_mesh_iface(state);
-
-+ return 2;
-+ } else if (strcmp(argv[0], "hardif") == 0) {
-+ state->hif = if_nametoindex(argv[1]);
-+ if (state->hif == 0) {
-+ fprintf(stderr, "Error - hard interface not found\n");
-+ return -ENODEV;
-+ }
-+
-+ snprintf(state->hard_iface, sizeof(state->hard_iface), "%s",
-+ argv[1]);
-+
-+ translate_mesh_iface(state);
- return 2;
- } else {
- /* parse vlan as part of -m parameter */
-@@ -193,6 +219,7 @@ int main(int argc, char **argv)
- const struct command *cmd;
- struct state state = {
- .arg_iface = mesh_dfl_iface,
-+ .hif = 0,
- .cmd = NULL,
- };
- int dev_arguments;
-diff --git a/main.h b/main.h
-index 1d952610aefb8367bd52e24bea8c04c3d70b94ea..a27d8486ef689206b27b1b50cb017b1b740e91c9 100644
---- a/main.h
-+++ b/main.h
-@@ -59,6 +59,7 @@ enum command_flags {
- enum command_type {
- SUBCOMMAND,
- SUBCOMMAND_VID,
-+ SUBCOMMAND_HIF,
- DEBUGTABLE,
- };
-
-@@ -66,6 +67,8 @@ struct state {
- char *arg_iface;
- char mesh_iface[IF_NAMESIZE];
- unsigned int mesh_ifindex;
-+ char hard_iface[IF_NAMESIZE];
-+ unsigned int hif;
- int vid;
- const struct command *cmd;
-
-diff --git a/sys.c b/sys.c
-index f19719cfad61f36f2a5c1078305de83eb5be142a..fd34b2fa3bcf168a32bd53fc0df3f35d5532433f 100644
---- a/sys.c
-+++ b/sys.c
-@@ -150,6 +150,10 @@ static void settings_usage(struct state *state)
- "vid <vid> ",
- NULL,
- };
-+ const char *hardif_prefixes[] = {
-+ "hardif <netdev> ",
-+ NULL,
-+ };
- const char *linestart = "Usage:";
- const char **prefixes;
- const char **prefix;
-@@ -158,6 +162,9 @@ static void settings_usage(struct state *state)
- case SUBCOMMAND_VID:
- prefixes = vlan_prefixes;
- break;
-+ case SUBCOMMAND_HIF:
-+ prefixes = hardif_prefixes;
-+ break;
- default:
- prefixes = default_prefixes;
- break;
-@@ -259,15 +266,23 @@ int handle_sys_setting(struct state *state, int argc, char **argv)
- return EXIT_FAILURE;
- }
-
-- /* if the specified interface is a VLAN then change the path to point
-- * to the proper "vlan%{vid}" subfolder in the sysfs tree.
-- */
-- if (state->vid >= 0)
-+ if (state->hif > 0) {
-+ /* if a hard interface was specified then change the path to
-+ * point to the proper ${hardif}/batman-adv path in the sysfs
-+ * tree.
-+ */
-+ snprintf(path_buff, PATH_BUFF_LEN, SYS_HARDIF_PATH,
-+ state->hard_iface);
-+ } else if (state->vid >= 0) {
-+ /* if the specified interface is a VLAN then change the path to
-+ * point to the proper "vlan%{vid}" subfolder in the sysfs tree.
-+ */
- snprintf(path_buff, PATH_BUFF_LEN, SYS_VLAN_PATH,
- state->mesh_iface, state->vid);
-- else
-+ } else {
- snprintf(path_buff, PATH_BUFF_LEN, SYS_BATIF_PATH_FMT,
- state->mesh_iface);
-+ }
-
- if (argc == 1) {
- res = sys_read_setting(state, path_buff, settings->sysfs_name);
-diff --git a/sys.h b/sys.h
-index d4f2fcf542bc66b2b1c6ec55a9ac16e10fdc5cac..b6f0f9043a9af8e3c4d4f8bf7e4af4cab0aa5df9 100644
---- a/sys.h
-+++ b/sys.h
-@@ -21,8 +21,9 @@
- #define SYS_BATIF_PATH_FMT "/sys/class/net/%s/mesh/"
- #define SYS_IFACE_PATH "/sys/class/net"
- #define SYS_IFACE_DIR SYS_IFACE_PATH"/%s/"
--#define SYS_MESH_IFACE_FMT SYS_IFACE_PATH"/%s/batman_adv/mesh_iface"
--#define SYS_IFACE_STATUS_FMT SYS_IFACE_PATH"/%s/batman_adv/iface_status"
-+#define SYS_HARDIF_PATH SYS_IFACE_DIR "batman_adv/"
-+#define SYS_MESH_IFACE_FMT SYS_HARDIF_PATH "mesh_iface"
-+#define SYS_IFACE_STATUS_FMT SYS_HARDIF_PATH "iface_status"
- #define SYS_VLAN_PATH SYS_IFACE_PATH"/%s/mesh/vlan%d/"
- #define SYS_ROUTING_ALGO_FMT SYS_IFACE_PATH"/%s/mesh/routing_algo"
- #define VLAN_ID_MAX_LEN 4
+++ /dev/null
-From: Sven Eckelmann <sven@narfation.org>
-Date: Thu, 13 Jun 2019 21:12:16 +0200
-Subject: batctl: Add elp_interval setting command
-
-B.A.T.M.A.N. V introduced a hard interface specific setting called
-elp_interval. It defines the interval in milliseconds in which batman-adv
-emits probing packets for neighbor sensing (ELP).
-
-Signed-off-by: Sven Eckelmann <sven@narfation.org>
-
-Forwarded: https://patchwork.open-mesh.org/patch/17949/
-
-diff --git a/Makefile b/Makefile
-index b7bd545e92963c62128efe60c0dc401bdd9fa023..f071da20f866bff6c162d697d2e43fa9d68ee08d 100755
---- a/Makefile
-+++ b/Makefile
-@@ -45,6 +45,7 @@ $(eval $(call add_command,bridge_loop_avoidance,y))
- $(eval $(call add_command,claimtable,y))
- $(eval $(call add_command,dat_cache,y))
- $(eval $(call add_command,distributed_arp_table,y))
-+$(eval $(call add_command,elp_interval,y))
- $(eval $(call add_command,event,y))
- $(eval $(call add_command,fragmentation,y))
- $(eval $(call add_command,gateways,y))
-diff --git a/README.rst b/README.rst
-index bc54412bc77dae1889d4f05298c34efc1966776b..92983aa6030e2a890283bca448b9203cd4d56b51 100644
---- a/README.rst
-+++ b/README.rst
-@@ -386,6 +386,22 @@ Example::
- 1000
-
-
-+batctl elp interval
-+===================
-+
-+display or modify the elp interval in ms for hard interface
-+
-+Usage::
-+
-+ batctl hardif $hardif elp_interval|et [interval]
-+
-+Example::
-+
-+ $ batctl hardif eth0 elp_interval 200
-+ $ batctl hardif eth0 elp_interval
-+ 200
-+
-+
- batctl loglevel
- ===============
-
-diff --git a/elp_interval.c b/elp_interval.c
-new file mode 100644
-index 0000000000000000000000000000000000000000..0a5e98923a622f52e523696b1ec1bfb856eeca9f
---- /dev/null
-+++ b/elp_interval.c
-@@ -0,0 +1,111 @@
-+// SPDX-License-Identifier: GPL-2.0
-+/* Copyright (C) 2009-2019 B.A.T.M.A.N. contributors:
-+ *
-+ * Marek Lindner <mareklindner@neomailbox.ch>
-+ *
-+ * License-Filename: LICENSES/preferred/GPL-2.0
-+ */
-+
-+#include <errno.h>
-+#include <stddef.h>
-+#include <stdint.h>
-+#include <string.h>
-+
-+#include "main.h"
-+#include "sys.h"
-+
-+static struct elp_interval_data {
-+ uint32_t elp_interval;
-+} elp_interval;
-+
-+static int parse_elp_interval(struct state *state, int argc, char *argv[])
-+{
-+ struct settings_data *settings = state->cmd->arg;
-+ struct elp_interval_data *data = settings->data;
-+ char *endptr;
-+
-+ if (argc != 2) {
-+ fprintf(stderr, "Error - incorrect number of arguments (expected 1)\n");
-+ return -EINVAL;
-+ }
-+
-+ data->elp_interval = strtoul(argv[1], &endptr, 0);
-+ if (!endptr || *endptr != '\0') {
-+ fprintf(stderr, "Error - the supplied argument is invalid: %s\n", argv[1]);
-+ return -EINVAL;
-+ }
-+
-+ return 0;
-+}
-+
-+static int print_elp_interval(struct nl_msg *msg, void *arg)
-+{
-+ struct nlattr *attrs[BATADV_ATTR_MAX + 1];
-+ struct nlmsghdr *nlh = nlmsg_hdr(msg);
-+ struct genlmsghdr *ghdr;
-+ int *result = arg;
-+
-+ if (!genlmsg_valid_hdr(nlh, 0))
-+ return NL_OK;
-+
-+ ghdr = nlmsg_data(nlh);
-+
-+ if (nla_parse(attrs, BATADV_ATTR_MAX, genlmsg_attrdata(ghdr, 0),
-+ genlmsg_len(ghdr), batadv_netlink_policy)) {
-+ return NL_OK;
-+ }
-+
-+ if (!attrs[BATADV_ATTR_ELP_INTERVAL])
-+ return NL_OK;
-+
-+ printf("%u\n", nla_get_u32(attrs[BATADV_ATTR_ELP_INTERVAL]));
-+
-+ *result = 0;
-+ return NL_STOP;
-+}
-+
-+static int get_attrs_elp_interval(struct nl_msg *msg, void *arg)
-+{
-+ struct state *state = arg;
-+
-+ nla_put_u32(msg, BATADV_ATTR_HARD_IFINDEX, state->hif);
-+
-+ return 0;
-+}
-+
-+static int get_elp_interval(struct state *state)
-+{
-+ return sys_simple_nlquery(state, BATADV_CMD_GET_HARDIF,
-+ get_attrs_elp_interval, print_elp_interval);
-+}
-+
-+static int set_attrs_elp_interval(struct nl_msg *msg, void *arg)
-+{
-+ struct state *state = arg;
-+ struct settings_data *settings = state->cmd->arg;
-+ struct elp_interval_data *data = settings->data;
-+
-+ nla_put_u32(msg, BATADV_ATTR_HARD_IFINDEX, state->hif);
-+ nla_put_u32(msg, BATADV_ATTR_ELP_INTERVAL, data->elp_interval);
-+
-+ return 0;
-+}
-+
-+static int set_elp_interval(struct state *state)
-+{
-+ return sys_simple_nlquery(state, BATADV_CMD_SET_HARDIF,
-+ set_attrs_elp_interval, NULL);
-+}
-+
-+static struct settings_data batctl_settings_elp_interval = {
-+ .sysfs_name = "elp_interval",
-+ .data = &elp_interval,
-+ .parse = parse_elp_interval,
-+ .netlink_get = get_elp_interval,
-+ .netlink_set = set_elp_interval,
-+};
-+
-+COMMAND_NAMED(SUBCOMMAND_HIF, elp_interval, "et", handle_sys_setting,
-+ COMMAND_FLAG_MESH_IFACE | COMMAND_FLAG_NETLINK,
-+ &batctl_settings_elp_interval,
-+ "[interval] \tdisplay or modify elp_interval setting");
-diff --git a/man/batctl.8 b/man/batctl.8
-index acb4288c4e6f59b322d20631ef8e3aee6f2215e5..690da023fd1ac6f51915a9167e92030a650fe1bd 100644
---- a/man/batctl.8
-+++ b/man/batctl.8
-@@ -93,6 +93,10 @@ the bonding mode.
- batctl will monitor for events from the netlink kernel interface of batman-adv. The local timestamp of the event will be printed
- when parameter \fB\-t\fP is specified. Parameter \fB\-r\fP will do the same but with relative timestamps.
- .br
-+.IP "\fBhardif <hardif>\fP \fBelp_interval\fP|\fBet\fP [\fBinterval\fP]"
-+If no parameter is given the current ELP interval setting of the hard interface is displayed otherwise the parameter is used to set the
-+ELP interval. The interval is in units of milliseconds.
-+.br
- .IP "\fBfragmentation\fP|\fBf\fP [\fB0\fP|\fB1\fP]"
- If no parameter is given the current fragmentation mode setting is displayed. Otherwise the parameter is used to enable or
- disable fragmentation.
+++ /dev/null
-From: Sven Eckelmann <sven@narfation.org>
-Date: Thu, 13 Jun 2019 21:12:17 +0200
-Subject: batctl: Add throughput_override setting command
-
-B.A.T.M.A.N. V introduced a hard interface specific setting called
-throughput. It defines the throughput value to be used by B.A.T.M.A.N. V
-when estimating the link throughput using this interface. If the value is
-set to 0 then batman-adv will try to estimate the throughput by itself.
-
-Signed-off-by: Sven Eckelmann <sven@narfation.org>
-
-Forwarded: https://patchwork.open-mesh.org/patch/17950/
-
-diff --git a/Makefile b/Makefile
-index f071da20f866bff6c162d697d2e43fa9d68ee08d..e3747a2a28eb34323e34a1e22f5507dd1d7cd0f6 100755
---- a/Makefile
-+++ b/Makefile
-@@ -67,6 +67,7 @@ $(eval $(call add_command,ping,y))
- $(eval $(call add_command,routing_algo,y))
- $(eval $(call add_command,statistics,y))
- $(eval $(call add_command,tcpdump,y))
-+$(eval $(call add_command,throughput_override,y))
- $(eval $(call add_command,throughputmeter,y))
- $(eval $(call add_command,traceroute,y))
- $(eval $(call add_command,transglobal,y))
-diff --git a/README.rst b/README.rst
-index 92983aa6030e2a890283bca448b9203cd4d56b51..128f539852fa085d023fb6d26ae436e76b617bb6 100644
---- a/README.rst
-+++ b/README.rst
-@@ -402,6 +402,23 @@ Example::
- 200
-
-
-+batctl throughput override
-+==========================
-+
-+display or modify the throughput override in kbit/s for hard interface
-+
-+Usage::
-+
-+ batctl hardif $hardif throughput_override|to [kbit]
-+
-+Example::
-+
-+ $ batctl hardif eth0 throughput_override 15000
-+ $ batctl hardif eth0 throughput_override 15mbit
-+ $ batctl hardif eth0 throughput_override
-+ 15.0 MBit
-+
-+
- batctl loglevel
- ===============
-
-diff --git a/man/batctl.8 b/man/batctl.8
-index 690da023fd1ac6f51915a9167e92030a650fe1bd..b8218963712bbf0cc9470459896fc904cd393748 100644
---- a/man/batctl.8
-+++ b/man/batctl.8
-@@ -203,6 +203,12 @@ supported routing algorithms are displayed.
- Otherwise the parameter is used to select the routing algorithm for the following
- batX interface to be created.
- .br
-+.IP "\fBhardif <hardif>\fP \fBthroughput_override|to\fP [\fBbandwidth\fP]\fP"
-+If no parameter is given the current througput override is displayed otherwise
-+the parameter is used to set the throughput override for the specified hard
-+interface.
-+Just enter any number (optionally followed by "kbit" or "mbit").
-+.br
- .IP "\fBisolation_mark\fP|\fBmark\fP"
- If no parameter is given the current isolation mark value is displayed.
- Otherwise the parameter is used to set or unset the isolation mark used by the
-diff --git a/throughput_override.c b/throughput_override.c
-new file mode 100644
-index 0000000000000000000000000000000000000000..28a6588b9417cca213ebde3545a3eb425592ad89
---- /dev/null
-+++ b/throughput_override.c
-@@ -0,0 +1,113 @@
-+// SPDX-License-Identifier: GPL-2.0
-+/* Copyright (C) 2009-2019 B.A.T.M.A.N. contributors:
-+ *
-+ * Marek Lindner <mareklindner@neomailbox.ch>
-+ *
-+ * License-Filename: LICENSES/preferred/GPL-2.0
-+ */
-+
-+#include <errno.h>
-+#include <stddef.h>
-+#include <stdint.h>
-+#include <string.h>
-+
-+#include "functions.h"
-+#include "main.h"
-+#include "sys.h"
-+
-+static struct throughput_override_data {
-+ uint32_t throughput_override;
-+} throughput_override;
-+
-+static int parse_throughput_override(struct state *state, int argc, char *argv[])
-+{
-+ struct settings_data *settings = state->cmd->arg;
-+ struct throughput_override_data *data = settings->data;
-+ bool ret;
-+
-+ if (argc != 2) {
-+ fprintf(stderr, "Error - incorrect number of arguments (expected 1)\n");
-+ return -EINVAL;
-+ }
-+
-+ ret = parse_throughput(argv[1], "throughput override",
-+ &data->throughput_override);
-+ if (!ret)
-+ return -EINVAL;
-+
-+ return 0;
-+}
-+
-+static int print_throughput_override(struct nl_msg *msg, void *arg)
-+{
-+ struct nlattr *attrs[BATADV_ATTR_MAX + 1];
-+ struct nlmsghdr *nlh = nlmsg_hdr(msg);
-+ struct genlmsghdr *ghdr;
-+ int *result = arg;
-+ uint32_t mbit;
-+
-+ if (!genlmsg_valid_hdr(nlh, 0))
-+ return NL_OK;
-+
-+ ghdr = nlmsg_data(nlh);
-+
-+ if (nla_parse(attrs, BATADV_ATTR_MAX, genlmsg_attrdata(ghdr, 0),
-+ genlmsg_len(ghdr), batadv_netlink_policy)) {
-+ return NL_OK;
-+ }
-+
-+ if (!attrs[BATADV_ATTR_THROUGHPUT_OVERRIDE])
-+ return NL_OK;
-+
-+ mbit = nla_get_u32(attrs[BATADV_ATTR_THROUGHPUT_OVERRIDE]);
-+ printf("%u.%u MBit\n", mbit / 10, mbit % 10);
-+
-+ *result = 0;
-+ return NL_STOP;
-+}
-+
-+static int get_attrs_elp_isolation(struct nl_msg *msg, void *arg)
-+{
-+ struct state *state = arg;
-+
-+ nla_put_u32(msg, BATADV_ATTR_HARD_IFINDEX, state->hif);
-+
-+ return 0;
-+}
-+
-+static int get_throughput_override(struct state *state)
-+{
-+ return sys_simple_nlquery(state, BATADV_CMD_GET_HARDIF,
-+ get_attrs_elp_isolation, print_throughput_override);
-+}
-+
-+static int set_attrs_throughput_override(struct nl_msg *msg, void *arg)
-+{
-+ struct state *state = arg;
-+ struct settings_data *settings = state->cmd->arg;
-+ struct throughput_override_data *data = settings->data;
-+
-+ nla_put_u32(msg, BATADV_ATTR_HARD_IFINDEX, state->hif);
-+ nla_put_u32(msg, BATADV_ATTR_THROUGHPUT_OVERRIDE, data->throughput_override);
-+
-+ return 0;
-+}
-+
-+static int set_throughput_override(struct state *state)
-+{
-+ return sys_simple_nlquery(state, BATADV_CMD_SET_HARDIF,
-+ set_attrs_throughput_override, NULL);
-+}
-+
-+static struct settings_data batctl_settings_throughput_override = {
-+ .sysfs_name = "throughput_override",
-+ .data = &throughput_override,
-+ .parse = parse_throughput_override,
-+ .netlink_get = get_throughput_override,
-+ .netlink_set = set_throughput_override,
-+};
-+
-+COMMAND_NAMED(SUBCOMMAND_HIF, throughput_override, "to", handle_sys_setting,
-+ COMMAND_FLAG_MESH_IFACE | COMMAND_FLAG_NETLINK,
-+ &batctl_settings_throughput_override,
-+ "[mbit] \tdisplay or modify throughput_override setting");