--- a/drivers/mtd/devices/block2mtd.c
+++ b/drivers/mtd/devices/block2mtd.c
-@@ -264,10 +264,12 @@ static int _open_bdev(struct block2mtd_d
+@@ -264,11 +264,13 @@ static int _open_bdev(struct block2mtd_d
bdev = open_bdev_exclusive(dev->devname, FMODE_READ|FMODE_WRITE, NULL);
#ifndef MODULE
if (IS_ERR(bdev)) {
/* We might not have rootfs mounted at this point. Try
to resolve the device name by other means. */
-+ wait_for_device_probe();
- dev_t devt = name_to_dev_t(dev->devname);
++ wait_for_device_probe();
+ devt = name_to_dev_t(dev->devname);
if (devt) {
bdev = open_by_devnum(devt, FMODE_WRITE | FMODE_READ);
+ }
--- a/drivers/mtd/mtdconcat.c
+++ b/drivers/mtd/mtdconcat.c
-@@ -619,7 +619,8 @@ static void concat_sync(struct mtd_info
+@@ -619,7 +619,8 @@ static void concat_sync(struct mtd_info
for (i = 0; i < concat->num_subdev; i++) {
struct mtd_info *subdev = concat->subdev[i];
---- linux-2.6.38.8/drivers/gpio/Kconfig.orig 2011-06-02 19:35:11.000000000 -0600
-+++ linux-2.6.38.8/drivers/gpio/Kconfig 2011-06-29 20:05:20.000000000 -0600
+--- a/drivers/gpio/Kconfig
++++ b/drivers/gpio/Kconfig
@@ -295,7 +295,7 @@ comment "PCI GPIO expanders:"
config GPIO_CS5535
---- linux-2.6.38.8/drivers/misc/Kconfig.orig 2011-06-02 19:35:11.000000000 -0600
-+++ linux-2.6.38.8/drivers/misc/Kconfig 2011-07-02 21:05:01.000000000 -0600
+--- a/drivers/misc/Kconfig
++++ b/drivers/misc/Kconfig
@@ -224,8 +224,7 @@ config SGI_XP
config CS5535_MFGPT
}
static struct cambria_board_info cambria_boards[] __initdata = {
-@@ -460,6 +507,14 @@ static struct i2c_board_info __initdata
+@@ -460,6 +507,14 @@ static struct i2c_board_info __initdata
I2C_BOARD_INFO("24c08", 0x51),
.platform_data = &cambria_eeprom_info
},
case UPIO_AU:
case UPIO_DWAPB:
case UPIO_DWAPB32:
-@@ -2521,6 +2541,7 @@ static int serial8250_request_std_resour
+@@ -2534,6 +2554,7 @@ static int serial8250_request_std_resour
case UPIO_MEM:
case UPIO_DWAPB:
case UPIO_DWAPB32:
if (!up->port.mapbase)
break;
-@@ -2559,6 +2580,7 @@ static void serial8250_release_std_resou
+@@ -2572,6 +2593,7 @@ static void serial8250_release_std_resou
case UPIO_MEM:
case UPIO_DWAPB:
case UPIO_DWAPB32:
if (!up->port.mapbase)
break;
-@@ -3074,6 +3096,7 @@ static int __devinit serial8250_probe(st
+@@ -3083,6 +3105,7 @@ static int __devinit serial8250_probe(st
port.set_termios = p->set_termios;
port.pm = p->pm;
port.dev = &dev->dev;
port.irqflags |= irqflag;
ret = serial8250_register_port(&port);
if (ret < 0) {
-@@ -3223,6 +3246,7 @@ int serial8250_register_port(struct uart
+@@ -3232,6 +3255,7 @@ int serial8250_register_port(struct uart
uart->port.iotype = port->iotype;
uart->port.flags = port->flags | UPF_BOOT_AUTOCONF;
uart->port.mapbase = port->mapbase;
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
-@@ -448,7 +448,7 @@ config ARCH_IXP4XX
+@@ -447,7 +447,7 @@ config ARCH_IXP4XX
bool "IXP4xx-based"
depends on MMU
select CPU_XSCALE