#include <dt-bindings/clock/pxa-clock.h>
#include "clk-pxa.h"
+#define KHz 1000
+#define MHz (1000 * 1000)
+
+#define MDREFR_K0DB4 (1 << 29) /* SDCLK0 Divide by 4 Control/Status */
+#define MDREFR_K2FREE (1 << 25) /* SDRAM Free-Running Control */
+#define MDREFR_K1FREE (1 << 24) /* SDRAM Free-Running Control */
+#define MDREFR_K0FREE (1 << 23) /* SDRAM Free-Running Control */
+#define MDREFR_SLFRSH (1 << 22) /* SDRAM Self-Refresh Control/Status */
+#define MDREFR_APD (1 << 20) /* SDRAM/SSRAM Auto-Power-Down Enable */
+#define MDREFR_K2DB2 (1 << 19) /* SDCLK2 Divide by 2 Control/Status */
+#define MDREFR_K2RUN (1 << 18) /* SDCLK2 Run Control/Status */
+#define MDREFR_K1DB2 (1 << 17) /* SDCLK1 Divide by 2 Control/Status */
+#define MDREFR_K1RUN (1 << 16) /* SDCLK1 Run Control/Status */
+#define MDREFR_E1PIN (1 << 15) /* SDCKE1 Level Control/Status */
+#define MDREFR_K0DB2 (1 << 14) /* SDCLK0 Divide by 2 Control/Status */
+#define MDREFR_K0RUN (1 << 13) /* SDCLK0 Run Control/Status */
+#define MDREFR_E0PIN (1 << 12) /* SDCKE0 Level Control/Status */
+#define MDREFR_DB2_MASK (MDREFR_K2DB2 | MDREFR_K1DB2)
+#define MDREFR_DRI_MASK 0xFFF
+
DEFINE_SPINLOCK(lock);
static struct clk *pxa_clocks[CLK_MAX];
{
of_clk_add_provider(np, of_clk_src_onecell_get, &onecell_data);
}
+
+void pxa2xx_core_turbo_switch(bool on)
+{
+ unsigned long flags;
+ unsigned int unused, clkcfg;
+
+ local_irq_save(flags);
+
+ asm("mrc p14, 0, %0, c6, c0, 0" : "=r" (clkcfg));
+ clkcfg &= ~CLKCFG_TURBO & ~CLKCFG_HALFTURBO;
+ if (on)
+ clkcfg |= CLKCFG_TURBO;
+ clkcfg |= CLKCFG_FCS;
+
+ asm volatile(
+ " b 2f\n"
+ " .align 5\n"
+ "1: mcr p14, 0, %1, c6, c0, 0\n"
+ " b 3f\n"
+ "2: b 1b\n"
+ "3: nop\n"
+ : "=&r" (unused)
+ : "r" (clkcfg)
+ : );
+
+ local_irq_restore(flags);
+}
+
+void pxa2xx_cpll_change(struct pxa2xx_freq *freq,
+ u32 (*mdrefr_dri)(unsigned int), u32 *mdrefr, u32 *cccr)
+{
+ unsigned int clkcfg = freq->clkcfg;
+ unsigned int unused, preset_mdrefr, postset_mdrefr;
+ unsigned long flags;
+
+ local_irq_save(flags);
+
+ /* Calculate the next MDREFR. If we're slowing down the SDRAM clock
+ * we need to preset the smaller DRI before the change. If we're
+ * speeding up we need to set the larger DRI value after the change.
+ */
+ preset_mdrefr = postset_mdrefr = readl(mdrefr);
+ if ((preset_mdrefr & MDREFR_DRI_MASK) > mdrefr_dri(freq->membus_khz)) {
+ preset_mdrefr = (preset_mdrefr & ~MDREFR_DRI_MASK);
+ preset_mdrefr |= mdrefr_dri(freq->membus_khz);
+ }
+ postset_mdrefr =
+ (postset_mdrefr & ~MDREFR_DRI_MASK) |
+ mdrefr_dri(freq->membus_khz);
+
+ /* If we're dividing the memory clock by two for the SDRAM clock, this
+ * must be set prior to the change. Clearing the divide must be done
+ * after the change.
+ */
+ if (freq->div2) {
+ preset_mdrefr |= MDREFR_DB2_MASK;
+ postset_mdrefr |= MDREFR_DB2_MASK;
+ } else {
+ postset_mdrefr &= ~MDREFR_DB2_MASK;
+ }
+
+ /* Set new the CCCR and prepare CLKCFG */
+ writel(freq->cccr, cccr);
+
+ asm volatile(
+ " ldr r4, [%1]\n"
+ " b 2f\n"
+ " .align 5\n"
+ "1: str %3, [%1] /* preset the MDREFR */\n"
+ " mcr p14, 0, %2, c6, c0, 0 /* set CLKCFG[FCS] */\n"
+ " str %4, [%1] /* postset the MDREFR */\n"
+ " b 3f\n"
+ "2: b 1b\n"
+ "3: nop\n"
+ : "=&r" (unused)
+ : "r" (mdrefr), "r" (clkcfg), "r" (preset_mdrefr),
+ "r" (postset_mdrefr)
+ : "r4", "r5");
+
+ local_irq_restore(flags);
+}
+
+int pxa2xx_determine_rate(struct clk_rate_request *req,
+ struct pxa2xx_freq *freqs, int nb_freqs)
+{
+ int i, closest_below = -1, closest_above = -1, ret = 0;
+ unsigned long rate;
+
+ for (i = 0; i < nb_freqs; i++) {
+ rate = freqs[i].cpll;
+ if (rate == req->rate)
+ break;
+ if (rate < req->min_rate)
+ continue;
+ if (rate > req->max_rate)
+ continue;
+ if (rate <= req->rate)
+ closest_below = i;
+ if ((rate >= req->rate) && (closest_above == -1))
+ closest_above = i;
+ }
+
+ req->best_parent_hw = NULL;
+
+ if (i < nb_freqs)
+ ret = 0;
+ else if (closest_below >= 0)
+ rate = freqs[closest_below].cpll;
+ else if (closest_above >= 0)
+ rate = freqs[closest_above].cpll;
+ else
+ ret = -EINVAL;
+
+ pr_debug("%s(rate=%lu) rate=%lu: %d\n", __func__, req->rate, rate, ret);
+ if (!rate)
+ req->rate = rate;
+
+ return ret;
+}
#ifndef _CLK_PXA_
#define _CLK_PXA_
+#define CLKCFG_TURBO 0x1
+#define CLKCFG_FCS 0x2
+#define CLKCFG_HALFTURBO 0x4
+#define CLKCFG_FASTBUS 0x8
+
#define PARENTS(name) \
static const char *const name ## _parents[] __initconst
#define MUX_RO_RATE_RO_OPS(name, clk_name) \
NULL, NULL, CLK_GET_RATE_NOCACHE); \
}
-#define RATE_RO_OPS(name, clk_name) \
+#define RATE_RO_OPS(name, clk_name) \
+ static struct clk_hw name ## _rate_hw; \
+ static const struct clk_ops name ## _rate_ops = { \
+ .recalc_rate = name ## _get_rate, \
+ }; \
+ static struct clk * __init clk_register_ ## name(void) \
+ { \
+ return clk_register_composite(NULL, clk_name, \
+ name ## _parents, \
+ ARRAY_SIZE(name ## _parents), \
+ NULL, NULL, \
+ &name ## _rate_hw, &name ## _rate_ops, \
+ NULL, NULL, CLK_GET_RATE_NOCACHE); \
+ }
+
+#define RATE_OPS(name, clk_name) \
static struct clk_hw name ## _rate_hw; \
static struct clk_ops name ## _rate_ops = { \
.recalc_rate = name ## _get_rate, \
+ .set_rate = name ## _set_rate, \
+ .determine_rate = name ## _determine_rate, \
}; \
static struct clk * __init clk_register_ ## name(void) \
{ \
NULL, NULL, CLK_GET_RATE_NOCACHE); \
}
+#define MUX_OPS(name, clk_name, flags) \
+ static struct clk_hw name ## _mux_hw; \
+ static const struct clk_ops name ## _mux_ops = { \
+ .get_parent = name ## _get_parent, \
+ .set_parent = name ## _set_parent, \
+ .determine_rate = name ## _determine_rate, \
+ }; \
+ static struct clk * __init clk_register_ ## name(void) \
+ { \
+ return clk_register_composite(NULL, clk_name, \
+ name ## _parents, \
+ ARRAY_SIZE(name ## _parents), \
+ &name ## _mux_hw, &name ## _mux_ops, \
+ NULL, NULL, \
+ NULL, NULL, \
+ CLK_GET_RATE_NOCACHE | flags); \
+ }
+
/*
* CKEN clock type
* This clock takes it source from 2 possible parents :
PXA_CKEN(dev_id, con_id, name, parents, 1, 1, 1, 1, \
NULL, cken_reg, cken_bit, flag)
+struct pxa2xx_freq {
+ unsigned long cpll;
+ unsigned int membus_khz;
+ unsigned int cccr;
+ unsigned int div2;
+ unsigned int clkcfg;
+};
+
static int dummy_clk_set_parent(struct clk_hw *hw, u8 index)
{
return 0;
extern int clk_pxa_cken_init(const struct desc_clk_cken *clks, int nb_clks);
void clk_pxa_dt_common_init(struct device_node *np);
+void pxa2xx_core_turbo_switch(bool on);
+void pxa2xx_cpll_change(struct pxa2xx_freq *freq,
+ u32 (*mdrefr_dri)(unsigned int), u32 *mdrefr,
+ u32 *cccr);
+int pxa2xx_determine_rate(struct clk_rate_request *req,
+ struct pxa2xx_freq *freqs, int nb_freqs);
+
#endif
#include <linux/io.h>
#include <linux/of.h>
#include <mach/pxa2xx-regs.h>
+#include <mach/smemc.h>
#include <dt-bindings/clock/pxa-clock.h>
#include "clk-pxa.h"
PXA_CORE_TURBO,
};
+#define PXA25x_CLKCFG(T) \
+ (CLKCFG_FCS | \
+ ((T) ? CLKCFG_TURBO : 0))
+#define PXA25x_CCCR(N2, M, L) (N2 << 7 | M << 5 | L)
+
+#define MDCNFG_DRAC2(mdcnfg) (((mdcnfg) >> 21) & 0x3)
+#define MDCNFG_DRAC0(mdcnfg) (((mdcnfg) >> 5) & 0x3)
+
+/* Define the refresh period in mSec for the SDRAM and the number of rows */
+#define SDRAM_TREF 64 /* standard 64ms SDRAM */
+
/*
* Various clock factors driven by the CCCR register.
*/
"core", "run", "cpll", "memory"
};
+static int get_sdram_rows(void)
+{
+ static int sdram_rows;
+ unsigned int drac2 = 0, drac0 = 0;
+ u32 mdcnfg;
+
+ if (sdram_rows)
+ return sdram_rows;
+
+ mdcnfg = readl_relaxed(MDCNFG);
+
+ if (mdcnfg & (MDCNFG_DE2 | MDCNFG_DE3))
+ drac2 = MDCNFG_DRAC2(mdcnfg);
+
+ if (mdcnfg & (MDCNFG_DE0 | MDCNFG_DE1))
+ drac0 = MDCNFG_DRAC0(mdcnfg);
+
+ sdram_rows = 1 << (11 + max(drac0, drac2));
+ return sdram_rows;
+}
+
+static u32 mdrefr_dri(unsigned int freq_khz)
+{
+ u32 interval = freq_khz * SDRAM_TREF / get_sdram_rows();
+
+ return interval / 32;
+}
+
/*
* Get the clock frequency as reflected by CCCR and the turbo flag.
* We assume these values have been applied via a fcs.
clk_pxa25x_memory_parents, 0),
};
+/*
+ * In this table, PXA25x_CCCR(N2, M, L) has the following meaning, where :
+ * - freq_cpll = n * m * L * 3.6864 MHz
+ * - n = N2 / 2
+ * - m = 2^(M - 1), where 1 <= M <= 3
+ * - l = L_clk_mult[L], ie. { 0, 27, 32, 36, 40, 45, 0, }[L]
+ */
+static struct pxa2xx_freq pxa25x_freqs[] = {
+ /* CPU MEMBUS CCCR DIV2 CCLKCFG */
+ { 99532800, 99500, PXA25x_CCCR(2, 1, 1), 1, PXA25x_CLKCFG(1)},
+ {199065600, 99500, PXA25x_CCCR(4, 1, 1), 0, PXA25x_CLKCFG(1)},
+ {298598400, 99500, PXA25x_CCCR(3, 2, 1), 0, PXA25x_CLKCFG(1)},
+ {398131200, 99500, PXA25x_CCCR(4, 2, 1), 0, PXA25x_CLKCFG(1)},
+};
+
static u8 clk_pxa25x_core_get_parent(struct clk_hw *hw)
{
unsigned long clkcfg;
return PXA_CORE_RUN;
}
-static unsigned long clk_pxa25x_core_get_rate(struct clk_hw *hw,
- unsigned long parent_rate)
+static int clk_pxa25x_core_set_parent(struct clk_hw *hw, u8 index)
{
- return parent_rate;
+ if (index > PXA_CORE_TURBO)
+ return -EINVAL;
+
+ pxa2xx_core_turbo_switch(index == PXA_CORE_TURBO);
+
+ return 0;
}
+
+static int clk_pxa25x_core_determine_rate(struct clk_hw *hw,
+ struct clk_rate_request *req)
+{
+ return __clk_mux_determine_rate(hw, req);
+}
+
PARENTS(clk_pxa25x_core) = { "run", "cpll" };
-MUX_RO_RATE_RO_OPS(clk_pxa25x_core, "core");
+MUX_OPS(clk_pxa25x_core, "core", CLK_SET_RATE_PARENT);
static unsigned long clk_pxa25x_run_get_rate(struct clk_hw *hw,
unsigned long parent_rate)
return m * l * n2 * parent_rate / 2;
}
+
+static int clk_pxa25x_cpll_determine_rate(struct clk_hw *hw,
+ struct clk_rate_request *req)
+{
+ return pxa2xx_determine_rate(req, pxa25x_freqs,
+ ARRAY_SIZE(pxa25x_freqs));
+}
+
+static int clk_pxa25x_cpll_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ int i;
+
+ pr_debug("%s(rate=%lu parent_rate=%lu)\n", __func__, rate, parent_rate);
+ for (i = 0; i < ARRAY_SIZE(pxa25x_freqs); i++)
+ if (pxa25x_freqs[i].cpll == rate)
+ break;
+
+ if (i >= ARRAY_SIZE(pxa25x_freqs))
+ return -EINVAL;
+
+ pxa2xx_cpll_change(&pxa25x_freqs[i], mdrefr_dri, MDREFR, CCCR);
+
+ return 0;
+}
PARENTS(clk_pxa25x_cpll) = { "osc_3_6864mhz" };
-RATE_RO_OPS(clk_pxa25x_cpll, "cpll");
+RATE_OPS(clk_pxa25x_cpll, "cpll");
static void __init pxa25x_register_core(void)
{
#include <linux/clkdev.h>
#include <linux/of.h>
+#include <mach/smemc.h>
+
#include <dt-bindings/clock/pxa-clock.h>
#include "clk-pxa.h"
PXA_MEM_RUN,
};
+#define PXA27x_CLKCFG(B, HT, T) \
+ (CLKCFG_FCS | \
+ ((B) ? CLKCFG_FASTBUS : 0) | \
+ ((HT) ? CLKCFG_HALFTURBO : 0) | \
+ ((T) ? CLKCFG_TURBO : 0))
+#define PXA27x_CCCR(A, L, N2) (A << 25 | N2 << 7 | L)
+
+#define MDCNFG_DRAC2(mdcnfg) (((mdcnfg) >> 21) & 0x3)
+#define MDCNFG_DRAC0(mdcnfg) (((mdcnfg) >> 5) & 0x3)
+
+/* Define the refresh period in mSec for the SDRAM and the number of rows */
+#define SDRAM_TREF 64 /* standard 64ms SDRAM */
+
static const char * const get_freq_khz[] = {
"core", "run", "cpll", "memory",
"system_bus"
};
+static int get_sdram_rows(void)
+{
+ static int sdram_rows;
+ unsigned int drac2 = 0, drac0 = 0;
+ u32 mdcnfg;
+
+ if (sdram_rows)
+ return sdram_rows;
+
+ mdcnfg = readl_relaxed(MDCNFG);
+
+ if (mdcnfg & (MDCNFG_DE2 | MDCNFG_DE3))
+ drac2 = MDCNFG_DRAC2(mdcnfg);
+
+ if (mdcnfg & (MDCNFG_DE0 | MDCNFG_DE1))
+ drac0 = MDCNFG_DRAC0(mdcnfg);
+
+ sdram_rows = 1 << (11 + max(drac0, drac2));
+ return sdram_rows;
+}
+
+static u32 mdrefr_dri(unsigned int freq_khz)
+{
+ u32 interval = freq_khz * SDRAM_TREF / get_sdram_rows();
+
+ return (interval - 31) / 32;
+}
+
/*
* Get the clock frequency as reflected by CCSR and the turbo flag.
* We assume these values have been applied via a fcs.
};
+/*
+ * PXA270 definitions
+ *
+ * For the PXA27x:
+ * Control variables are A, L, 2N for CCCR; B, HT, T for CLKCFG.
+ *
+ * A = 0 => memory controller clock from table 3-7,
+ * A = 1 => memory controller clock = system bus clock
+ * Run mode frequency = 13 MHz * L
+ * Turbo mode frequency = 13 MHz * L * N
+ * System bus frequency = 13 MHz * L / (B + 1)
+ *
+ * In CCCR:
+ * A = 1
+ * L = 16 oscillator to run mode ratio
+ * 2N = 6 2 * (turbo mode to run mode ratio)
+ *
+ * In CCLKCFG:
+ * B = 1 Fast bus mode
+ * HT = 0 Half-Turbo mode
+ * T = 1 Turbo mode
+ *
+ * For now, just support some of the combinations in table 3-7 of
+ * PXA27x Processor Family Developer's Manual to simplify frequency
+ * change sequences.
+ */
+static struct pxa2xx_freq pxa27x_freqs[] = {
+ {104000000, 104000, PXA27x_CCCR(1, 8, 2), 0, PXA27x_CLKCFG(1, 0, 1) },
+ {156000000, 104000, PXA27x_CCCR(1, 8, 3), 0, PXA27x_CLKCFG(1, 0, 1) },
+ {208000000, 208000, PXA27x_CCCR(0, 16, 2), 1, PXA27x_CLKCFG(0, 0, 1) },
+ {312000000, 208000, PXA27x_CCCR(1, 16, 3), 1, PXA27x_CLKCFG(1, 0, 1) },
+ {416000000, 208000, PXA27x_CCCR(1, 16, 4), 1, PXA27x_CLKCFG(1, 0, 1) },
+ {520000000, 208000, PXA27x_CCCR(1, 16, 5), 1, PXA27x_CLKCFG(1, 0, 1) },
+ {624000000, 208000, PXA27x_CCCR(1, 16, 6), 1, PXA27x_CLKCFG(1, 0, 1) },
+};
+
static unsigned long clk_pxa27x_cpll_get_rate(struct clk_hw *hw,
unsigned long parent_rate)
{
return N;
}
+
+static int clk_pxa27x_cpll_determine_rate(struct clk_hw *hw,
+ struct clk_rate_request *req)
+{
+ return pxa2xx_determine_rate(req, pxa27x_freqs,
+ ARRAY_SIZE(pxa27x_freqs));
+}
+
+static int clk_pxa27x_cpll_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ int i;
+
+ pr_debug("%s(rate=%lu parent_rate=%lu)\n", __func__, rate, parent_rate);
+ for (i = 0; i < ARRAY_SIZE(pxa27x_freqs); i++)
+ if (pxa27x_freqs[i].cpll == rate)
+ break;
+
+ if (i >= ARRAY_SIZE(pxa27x_freqs))
+ return -EINVAL;
+
+ pxa2xx_cpll_change(&pxa27x_freqs[i], mdrefr_dri, MDREFR, CCCR);
+ return 0;
+}
+
PARENTS(clk_pxa27x_cpll) = { "osc_13mhz" };
-RATE_RO_OPS(clk_pxa27x_cpll, "cpll");
+RATE_OPS(clk_pxa27x_cpll, "cpll");
static unsigned long clk_pxa27x_lcd_base_get_rate(struct clk_hw *hw,
unsigned long parent_rate)
clk_register_fixed_factor(NULL, "ppll_312mhz", "osc_13mhz", 0, 24, 1);
}
-static unsigned long clk_pxa27x_core_get_rate(struct clk_hw *hw,
- unsigned long parent_rate)
-{
- unsigned long clkcfg;
- unsigned int ht, osc_forced;
- unsigned long ccsr = readl(CCSR);
-
- osc_forced = ccsr & (1 << CCCR_CPDIS_BIT);
- asm("mrc\tp14, 0, %0, c6, c0, 0" : "=r" (clkcfg));
- ht = clkcfg & (1 << 2);
-
- if (osc_forced)
- return parent_rate;
- if (ht)
- return parent_rate / 2;
- else
- return parent_rate;
-}
-
static u8 clk_pxa27x_core_get_parent(struct clk_hw *hw)
{
unsigned long clkcfg;
return PXA_CORE_TURBO;
return PXA_CORE_RUN;
}
+
+static int clk_pxa27x_core_set_parent(struct clk_hw *hw, u8 index)
+{
+ if (index > PXA_CORE_TURBO)
+ return -EINVAL;
+
+ pxa2xx_core_turbo_switch(index == PXA_CORE_TURBO);
+
+ return 0;
+}
+
+static int clk_pxa27x_core_determine_rate(struct clk_hw *hw,
+ struct clk_rate_request *req)
+{
+ return __clk_mux_determine_rate(hw, req);
+}
+
PARENTS(clk_pxa27x_core) = { "osc_13mhz", "run", "cpll" };
-MUX_RO_RATE_RO_OPS(clk_pxa27x_core, "core");
+MUX_OPS(clk_pxa27x_core, "core", CLK_SET_RATE_PARENT);
static unsigned long clk_pxa27x_run_get_rate(struct clk_hw *hw,
unsigned long parent_rate)
projects / openwrt / staging / blogic.git / commitdiff