--- /dev/null
+diff -urN linux-2.6.8.1/arch/mips/brcm-boards/bcm963xx/Kconfig linux-2.6.8.1-brcm63xx/arch/mips/brcm-boards/bcm963xx/Kconfig
+--- linux-2.6.8.1/arch/mips/brcm-boards/bcm963xx/Kconfig 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.8.1-brcm63xx/arch/mips/brcm-boards/bcm963xx/Kconfig 2006-06-26 09:07:08.000000000 +0200
+@@ -0,0 +1,169 @@
++# Kernel and Driver configuration for Broadcom Commengine ADSL board
++choice
++ prompt "Broadcom Commengine ADSL board"
++ depends on MIPS_BRCM
++ default BCM96345
++ help
++ Select different Broadcom ADSL board
++
++config BCM96338
++ bool "96338 ADSL board"
++ select DMA_NONCOHERENT
++
++config BCM96345
++ bool "96345 ADSL board"
++ select DMA_NONCOHERENT
++
++config BCM96348
++ bool "96348 ADSL board"
++ select DMA_NONCOHERENT
++
++endchoice
++
++config BCM_BOARD
++ bool "Support for Broadcom Board"
++ depends on BCM96338 || BCM96345 || BCM96348
++
++config BCM_SERIAL
++ bool "Support for Serial Port"
++ depends on BCM96338 || BCM96345 || BCM96348
++
++config BCM_ENET
++ tristate "Support for Ethernet"
++ depends on BCM96338 || BCM96345 || BCM96348
++
++config BCM_USB
++ tristate "Support for USB"
++ depends on BCM96338 || BCM96345 || BCM96348
++
++config BCM_WLAN
++ tristate "Support for Wireless"
++ depends on BCM96338 || BCM96345 || BCM96348
++
++config BCM_PCI
++ bool "Support for PCI"
++ depends on BCM96338 || BCM96345 || BCM96348
++ select PCI
++
++config BCM_ATMAPI
++ tristate "Support for ATM"
++ depends on BCM96338 || BCM96345 || BCM96348
++
++config BCM_ATMTEST
++ tristate "Support for ATM Diagnostic"
++ depends on BCM96338 || BCM96345 || BCM96348
++
++config BCM_ADSL
++ tristate "Support for ADSL"
++ depends on BCM96338 || BCM96345 || BCM96348
++
++config BCM_ENDPOINT
++ tristate "Support for VOICE"
++ depends on BCM96338 || BCM96345 || BCM96348
++
++config BCM_PROCFS
++ tristate "Support for PROCFS"
++ depends on BCM96338 || BCM96345 || BCM96348
++
++config BCM_VDSL
++ tristate "Support for VDSL"
++ depends on BCM96338 || BCM96345 || BCM96348
++
++config BCM_SECURITY
++ tristate "Support for SECURITY"
++ depends on BCM96338 || BCM96345 || BCM96348
++
++config BCM_HPNA
++ tristate "Support for HPNA"
++ depends on BCM96338 || BCM96345 || BCM96348
++
++config BCM_BOARD_IMPL
++ int "Implementation index for ADSL Board"
++ depends on BCM96338 || BCM96345 || BCM96348
++
++config BCM_SERIAL_IMPL
++ int "Implementation index for Serial"
++ depends on BCM96338 || BCM96345 || BCM96348
++
++config BCM_ENET_IMPL
++ int "Implementation index for Ethernet"
++ depends on BCM96338 || BCM96345 || BCM96348
++
++config BCM_USB_IMPL
++ int "Implementation index for USB"
++ depends on BCM96338 || BCM96345 || BCM96348
++
++config BCM_WLAN_IMPL
++ int "Implementation index for WIRELESS"
++ depends on BCM96338 || BCM96345 || BCM96348
++
++config BCM_ATMAPI_IMPL
++ int "Implementation index for ATM"
++ depends on BCM96338 || BCM96345 || BCM96348
++
++config BCM_ATMTEST_IMPL
++ int "Implementation index for ATM Diagnostic"
++ depends on BCM96338 || BCM96345 || BCM96348
++
++config BCM_BLAA_IMPL
++ int "Implementation index for BLAA"
++ depends on BCM96338 || BCM96345 || BCM96348
++
++config BCM_ADSL_IMPL
++ int "Implementation index for ADSL"
++ depends on BCM96338 || BCM96345 || BCM96348
++
++config BCM_ENDPOINT_IMPL
++ int "Implementation index for VOICE"
++ depends on BCM96338 || BCM96345 || BCM96348
++
++config BCM_PROCFS_IMPL
++ int "Implementation index for PROCFS"
++ depends on BCM96338 || BCM96345 || BCM96348
++
++config BCM_VDSL_IMPL
++ int "Implementation index for VDSL"
++ depends on BCM96338 || BCM96345 || BCM96348
++
++config BCM_SECURITY_IMPL
++ int "Implementation index for SECURITY"
++ depends on BCM96338 || BCM96345 || BCM96348
++
++config BCM_HPNA_IMPL
++ int "Implementation index for HPNA"
++ depends on BCM96338 || BCM96345 || BCM96348
++
++choice
++ prompt "Root File System"
++ depends on MIPS_BRCM
++ default ROOTFS_SQUASHFS
++ help
++ Select root file system on the board flash.
++
++config ROOTFS_SQUASHFS
++ bool "SQUASHFS"
++config ROOTFS_CRAMFS
++ bool "CRAMFS"
++config ROOTFS_JFFS2
++ bool "JFFS2"
++config ROOTFS_NFS
++ bool "NFS"
++
++endchoice
++
++config ROOT_FLASHFS
++ string "flash partition"
++ depends on ROOTFS_SQUASHFS || ROOTFS_CRAMFS || ROOTFS_JFFS2
++ default "root=31:0 ro noinitrd" if ROOTFS_SQUASHFS = y || ROOTFS_CRAMFS = y
++ default "root=31:2 ro noinitrd" if ROOTFS_JFFS2 = y
++ help
++ This is the root file system partition on flash memory
++
++config ROOT_NFS_DIR
++ string "NFS server path"
++ depends on ROOTFS_NFS
++ default "/opt/bcm96338/targets/96338R/fs" if BCM96338 = y
++ default "/opt/bcm96345/targets/96345R/fs" if BCM96345 = y
++ default "/opt/bcm96348/targets/96348R/fs" if BCM96348 = y
++ help
++ This is the path of NFS server (host system)
+diff -urN linux-2.6.8.1/arch/mips/brcm-boards/bcm963xx/Makefile linux-2.6.8.1-brcm63xx/arch/mips/brcm-boards/bcm963xx/Makefile
+--- linux-2.6.8.1/arch/mips/brcm-boards/bcm963xx/Makefile 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.8.1-brcm63xx/arch/mips/brcm-boards/bcm963xx/Makefile 2006-06-26 09:07:08.000000000 +0200
+@@ -0,0 +1,23 @@
++#
++# Makefile for generic Broadcom MIPS boards
++#
++# Copyright (C) 2004 Broadcom Corporation
++#
++obj-y := irq.o prom.o setup.o time.o ser_init.o
++
++SRCBASE := $(TOPDIR)
++EXTRA_CFLAGS += -I$(INC_BRCMBOARDPARMS_PATH)/$(BRCM_BOARD) -I$(SRCBASE)/include -I$(INC_BRCMDRIVER_PUB_PATH)/$(BRCM_BOARD)
++#EXTRA_CFLAGS += -I$(INC_ADSLDRV_PATH) -DDBG
++EXTRA_CFLAGS += -I$(INC_ADSLDRV_PATH)
++
++
++ifeq "$(ADSL)" "ANNEX_B"
++EXTRA_CFLAGS += -DADSL_ANNEXB
++endif
++ifeq "$(ADSL)" "SADSL"
++EXTRA_CFLAGS += -DADSL_SADSL
++endif
++ifeq "$(ADSL)" "ANNEX_C"
++EXTRA_CFLAGS += -DADSL_ANNEXC
++endif
++
+diff -urN linux-2.6.8.1/arch/mips/brcm-boards/bcm963xx/irq.c linux-2.6.8.1-brcm63xx/arch/mips/brcm-boards/bcm963xx/irq.c
+--- linux-2.6.8.1/arch/mips/brcm-boards/bcm963xx/irq.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.8.1-brcm63xx/arch/mips/brcm-boards/bcm963xx/irq.c 2006-06-26 09:07:08.000000000 +0200
+@@ -0,0 +1,276 @@
++/*
++<:copyright-gpl
++ Copyright 2002 Broadcom Corp. All Rights Reserved.
++
++ This program is free software; you can distribute it and/or modify it
++ under the terms of the GNU General Public License (Version 2) as
++ published by the Free Software Foundation.
++
++ This program is distributed in the hope it will be useful, but WITHOUT
++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
++ for more details.
++
++ You should have received a copy of the GNU General Public License along
++ with this program; if not, write to the Free Software Foundation, Inc.,
++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
++:>
++*/
++/*
++ * Interrupt control functions for Broadcom 963xx MIPS boards
++ */
++
++#include <asm/atomic.h>
++
++#include <linux/delay.h>
++#include <linux/init.h>
++#include <linux/ioport.h>
++#include <linux/irq.h>
++#include <linux/interrupt.h>
++#include <linux/kernel.h>
++#include <linux/slab.h>
++#include <linux/module.h>
++
++#include <asm/irq.h>
++#include <asm/mipsregs.h>
++#include <asm/addrspace.h>
++#include <asm/signal.h>
++#include <bcm_map_part.h>
++#include <bcm_intr.h>
++
++extern asmlinkage unsigned int do_IRQ(int irq, struct pt_regs *regs);
++
++static void irq_dispatch_int(struct pt_regs *regs)
++{
++ unsigned int pendingIrqs;
++ static unsigned int irqBit;
++ static unsigned int isrNumber = 31;
++
++ pendingIrqs = PERF->IrqStatus & PERF->IrqMask;
++ if (!pendingIrqs) {
++ return;
++ }
++
++ while (1) {
++ irqBit <<= 1;
++ isrNumber++;
++ if (isrNumber == 32) {
++ isrNumber = 0;
++ irqBit = 0x1;
++ }
++ if (pendingIrqs & irqBit) {
++ PERF->IrqMask &= ~irqBit; // mask
++ do_IRQ(isrNumber + INTERNAL_ISR_TABLE_OFFSET, regs);
++ break;
++ }
++ }
++}
++
++static void irq_dispatch_ext(uint32 irq, struct pt_regs *regs)
++{
++ if (!(PERF->ExtIrqCfg & (1 << (irq - INTERRUPT_ID_EXTERNAL_0 + EI_MASK_SHFT)))) {
++ printk("**** Ext IRQ mask. Should not dispatch ****\n");
++ }
++ /* disable and clear interrupt in the controller */
++ PERF->ExtIrqCfg |= (1 << (irq - INTERRUPT_ID_EXTERNAL_0 + EI_CLEAR_SHFT));
++ PERF->ExtIrqCfg &= ~(1 << (irq - INTERRUPT_ID_EXTERNAL_0 + EI_MASK_SHFT));
++ do_IRQ(irq, regs);
++}
++
++void brcm_irq_dispatch(struct pt_regs *regs)
++{
++ u32 cause;
++ while((cause = (read_c0_cause()& CAUSEF_IP))) {
++ if (cause & CAUSEF_IP7)
++ do_IRQ(MIPS_TIMER_INT, regs);
++ else if (cause & CAUSEF_IP2)
++ irq_dispatch_int(regs);
++ else if (cause & CAUSEF_IP3)
++ irq_dispatch_ext(INTERRUPT_ID_EXTERNAL_0, regs);
++ else if (cause & CAUSEF_IP4)
++ irq_dispatch_ext(INTERRUPT_ID_EXTERNAL_1, regs);
++ else if (cause & CAUSEF_IP5)
++ irq_dispatch_ext(INTERRUPT_ID_EXTERNAL_2, regs);
++ else if (cause & CAUSEF_IP6)
++ irq_dispatch_ext(INTERRUPT_ID_EXTERNAL_3, regs);
++ cli();
++ }
++}
++
++
++void enable_brcm_irq(unsigned int irq)
++{
++ unsigned long flags;
++
++ local_irq_save(flags);
++ if( irq >= INTERNAL_ISR_TABLE_OFFSET ) {
++ PERF->IrqMask |= (1 << (irq - INTERNAL_ISR_TABLE_OFFSET));
++ }
++ else if (irq >= INTERRUPT_ID_EXTERNAL_0 && irq <= INTERRUPT_ID_EXTERNAL_3) {
++ /* enable and clear interrupt in the controller */
++ PERF->ExtIrqCfg |= (1 << (irq - INTERRUPT_ID_EXTERNAL_0 + EI_CLEAR_SHFT));
++ PERF->ExtIrqCfg |= (1 << (irq - INTERRUPT_ID_EXTERNAL_0 + EI_MASK_SHFT));
++ }
++ local_irq_restore(flags);
++}
++
++void disable_brcm_irq(unsigned int irq)
++{
++ unsigned long flags;
++
++ local_irq_save(flags);
++ if( irq >= INTERNAL_ISR_TABLE_OFFSET ) {
++ PERF->IrqMask &= ~(1 << (irq - INTERNAL_ISR_TABLE_OFFSET));
++ }
++ else if (irq >= INTERRUPT_ID_EXTERNAL_0 && irq <= INTERRUPT_ID_EXTERNAL_3) {
++ /* disable interrupt in the controller */
++ PERF->ExtIrqCfg &= ~(1 << (irq - INTERRUPT_ID_EXTERNAL_0 + EI_MASK_SHFT));
++ }
++ local_irq_restore(flags);
++}
++
++void ack_brcm_irq(unsigned int irq)
++{
++ /* Already done in brcm_irq_dispatch */
++}
++
++unsigned int startup_brcm_irq(unsigned int irq)
++{
++ enable_brcm_irq(irq);
++
++ return 0; /* never anything pending */
++}
++
++unsigned int startup_brcm_none(unsigned int irq)
++{
++ return 0;
++}
++
++void end_brcm_irq(unsigned int irq)
++{
++ if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
++ enable_brcm_irq(irq);
++}
++
++void end_brcm_none(unsigned int irq)
++{
++}
++
++#define ALLINTS_NOTIMER (IE_IRQ0 | IE_IRQ1 | IE_IRQ2 | IE_IRQ3 | IE_IRQ4)
++
++static void __init brcm_irq_setup(void)
++{
++ extern asmlinkage void brcmIRQ(void);
++
++ clear_c0_status(ST0_BEV);
++ set_except_vector(0, brcmIRQ);
++ change_c0_status(ST0_IM, ALLINTS_NOTIMER);
++
++#ifdef CONFIG_REMOTE_DEBUG
++ rs_kgdb_hook(0);
++#endif
++}
++
++static struct hw_interrupt_type brcm_irq_type = {
++ .typename = "MIPS",
++ .startup = startup_brcm_irq,
++ .shutdown = disable_brcm_irq,
++ .enable = enable_brcm_irq,
++ .disable = disable_brcm_irq,
++ .ack = ack_brcm_irq,
++ .end = end_brcm_irq,
++ .set_affinity = NULL
++};
++
++static struct hw_interrupt_type brcm_irq_no_end_type = {
++ .typename = "MIPS",
++ .startup = startup_brcm_none,
++ .shutdown = disable_brcm_irq,
++ .enable = enable_brcm_irq,
++ .disable = disable_brcm_irq,
++ .ack = ack_brcm_irq,
++ .end = end_brcm_none,
++ .set_affinity = NULL
++};
++
++void __init arch_init_irq(void)
++{
++ int i;
++
++ for (i = 0; i < NR_IRQS; i++) {
++ irq_desc[i].status = IRQ_DISABLED;
++ irq_desc[i].action = 0;
++ irq_desc[i].depth = 1;
++ irq_desc[i].handler = &brcm_irq_type;
++ }
++
++ brcm_irq_setup();
++}
++
++int request_external_irq(unsigned int irq,
++ FN_HANDLER handler,
++ unsigned long irqflags,
++ const char * devname,
++ void *dev_id)
++{
++ unsigned long flags;
++
++ local_irq_save(flags);
++
++ PERF->ExtIrqCfg |= (1 << (irq - INTERRUPT_ID_EXTERNAL_0 + EI_CLEAR_SHFT)); // Clear
++ PERF->ExtIrqCfg &= ~(1 << (irq - INTERRUPT_ID_EXTERNAL_0 + EI_MASK_SHFT)); // Mask
++ PERF->ExtIrqCfg &= ~(1 << (irq - INTERRUPT_ID_EXTERNAL_0 + EI_INSENS_SHFT)); // Edge insesnsitive
++ PERF->ExtIrqCfg |= (1 << (irq - INTERRUPT_ID_EXTERNAL_0 + EI_LEVEL_SHFT)); // Level triggered
++ PERF->ExtIrqCfg &= ~(1 << (irq - INTERRUPT_ID_EXTERNAL_0 + EI_SENSE_SHFT)); // Low level
++
++ local_irq_restore(flags);
++
++ return( request_irq(irq, handler, irqflags, devname, dev_id) );
++}
++
++/* VxWorks compatibility function(s). */
++
++unsigned int BcmHalMapInterrupt(FN_HANDLER pfunc, unsigned int param,
++ unsigned int interruptId)
++{
++ int nRet = -1;
++ char *devname;
++
++ devname = kmalloc(16, GFP_KERNEL);
++ if (devname)
++ sprintf( devname, "brcm_%d", interruptId );
++
++ /* Set the IRQ description to not automatically enable the interrupt at
++ * the end of an ISR. The driver that handles the interrupt must
++ * explicitly call BcmHalInterruptEnable or enable_brcm_irq. This behavior
++ * is consistent with interrupt handling on VxWorks.
++ */
++ irq_desc[interruptId].handler = &brcm_irq_no_end_type;
++
++ if( interruptId >= INTERNAL_ISR_TABLE_OFFSET )
++ {
++ nRet = request_irq( interruptId, pfunc, SA_SAMPLE_RANDOM | SA_INTERRUPT,
++ devname, (void *) param );
++ }
++ else if (interruptId >= INTERRUPT_ID_EXTERNAL_0 && interruptId <= INTERRUPT_ID_EXTERNAL_3)
++ {
++ nRet = request_external_irq( interruptId, pfunc, SA_SAMPLE_RANDOM | SA_INTERRUPT,
++ devname, (void *) param );
++ }
++
++ return( nRet );
++}
++
++
++/* Debug function. */
++
++void dump_intr_regs(void)
++{
++ printk("PERF->ExtIrqCfg [%08x]\n", *(&(PERF->ExtIrqCfg)));
++}
++
++EXPORT_SYMBOL(enable_brcm_irq);
++EXPORT_SYMBOL(disable_brcm_irq);
++EXPORT_SYMBOL(request_external_irq);
++EXPORT_SYMBOL(BcmHalMapInterrupt);
++
+diff -urN linux-2.6.8.1/arch/mips/brcm-boards/bcm963xx/prom.c linux-2.6.8.1-brcm63xx/arch/mips/brcm-boards/bcm963xx/prom.c
+--- linux-2.6.8.1/arch/mips/brcm-boards/bcm963xx/prom.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.8.1-brcm63xx/arch/mips/brcm-boards/bcm963xx/prom.c 2006-06-26 09:07:08.000000000 +0200
+@@ -0,0 +1,233 @@
++/*
++<:copyright-gpl
++ Copyright 2004 Broadcom Corp. All Rights Reserved.
++
++ This program is free software; you can distribute it and/or modify it
++ under the terms of the GNU General Public License (Version 2) as
++ published by the Free Software Foundation.
++
++ This program is distributed in the hope it will be useful, but WITHOUT
++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
++ for more details.
++
++ You should have received a copy of the GNU General Public License along
++ with this program; if not, write to the Free Software Foundation, Inc.,
++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
++:>
++*/
++/*
++ * prom.c: PROM library initialization code.
++ *
++ */
++#include <linux/init.h>
++#include <linux/mm.h>
++#include <linux/sched.h>
++#include <linux/bootmem.h>
++#include <linux/blkdev.h>
++#include <asm/addrspace.h>
++#include <asm/bootinfo.h>
++#include <asm/cpu.h>
++#include <asm/time.h>
++
++#include <bcm_map_part.h>
++#include <board.h>
++#include "boardparms.h"
++#include "softdsl/AdslCoreDefs.h"
++
++
++extern int do_syslog(int, char *, int);
++extern void serial_init(void);
++extern void __init InitNvramInfo( void );
++extern void kerSysFlashInit( void );
++extern unsigned long get_nvram_start_addr(void);
++void __init create_root_nfs_cmdline( char *cmdline );
++
++#if defined(CONFIG_BCM96338)
++#define CPU_CLOCK 240000000
++#define MACH_BCM MACH_BCM96338
++#endif
++#if defined(CONFIG_BCM96345)
++#define CPU_CLOCK 140000000
++#define MACH_BCM MACH_BCM96345
++#endif
++#if defined(CONFIG_BCM96348)
++void __init calculateCpuSpeed(void);
++static unsigned long cpu_speed;
++#define CPU_CLOCK cpu_speed
++#define MACH_BCM MACH_BCM96348
++#endif
++
++const char *get_system_type(void)
++{
++ PNVRAM_DATA pNvramData = (PNVRAM_DATA) get_nvram_start_addr();
++
++ return( pNvramData->szBoardId );
++}
++
++unsigned long getMemorySize(void)
++{
++ unsigned long ulSdramType = BOARD_SDRAM_TYPE;
++
++ unsigned long ulSdramSize;
++
++ switch( ulSdramType )
++ {
++ case BP_MEMORY_16MB_1_CHIP:
++ case BP_MEMORY_16MB_2_CHIP:
++ ulSdramSize = 16 * 1024 * 1024;
++ break;
++ case BP_MEMORY_32MB_1_CHIP:
++ case BP_MEMORY_32MB_2_CHIP:
++ ulSdramSize = 32 * 1024 * 1024;
++ break;
++ case BP_MEMORY_64MB_2_CHIP:
++ ulSdramSize = 64 * 1024 * 1024;
++ break;
++ default:
++ ulSdramSize = 8 * 1024 * 1024;
++ break;
++ }
++
++ return ulSdramSize;
++}
++
++/* --------------------------------------------------------------------------
++ Name: prom_init
++ -------------------------------------------------------------------------- */
++void __init prom_init(void)
++{
++ extern ulong r4k_interval;
++
++ serial_init();
++
++ kerSysFlashInit();
++
++ do_syslog(8, NULL, 8);
++
++ printk( "%s prom init\n", get_system_type() );
++
++ PERF->IrqMask = 0;
++
++ arcs_cmdline[0] = '\0';
++
++#if defined(CONFIG_ROOT_NFS)
++ create_root_nfs_cmdline( arcs_cmdline );
++#elif defined(CONFIG_ROOT_FLASHFS)
++ strcpy(arcs_cmdline, CONFIG_ROOT_FLASHFS);
++#endif
++
++ add_memory_region(0, (getMemorySize() - ADSL_SDRAM_IMAGE_SIZE), BOOT_MEM_RAM);
++
++#if defined(CONFIG_BCM96348)
++ calculateCpuSpeed();
++#endif
++ /* Count register increments every other clock */
++ r4k_interval = CPU_CLOCK / HZ / 2;
++ mips_hpt_frequency = CPU_CLOCK / 2;
++
++ mips_machgroup = MACH_GROUP_BRCM;
++ mips_machtype = MACH_BCM;
++}
++
++/* --------------------------------------------------------------------------
++ Name: prom_free_prom_memory
++Abstract:
++ -------------------------------------------------------------------------- */
++void __init prom_free_prom_memory(void)
++{
++
++}
++
++
++#if defined(CONFIG_ROOT_NFS)
++/* This function reads in a line that looks something like this:
++ *
++ *
++ * CFE bootline=bcmEnet(0,0)host:vmlinux e=192.169.0.100:ffffff00 h=192.169.0.1
++ *
++ *
++ * and retuns in the cmdline parameter some that looks like this:
++ *
++ * CONFIG_CMDLINE="root=/dev/nfs nfsroot=192.168.0.1:/opt/targets/96345R/fs
++ * ip=192.168.0.100:192.168.0.1::255.255.255.0::eth0:off rw"
++ */
++#define BOOT_LINE_ADDR 0x0
++#define HEXDIGIT(d) ((d >= '0' && d <= '9') ? (d - '0') : ((d | 0x20) - 'W'))
++#define HEXBYTE(b) (HEXDIGIT((b)[0]) << 4) + HEXDIGIT((b)[1])
++extern unsigned long get_nvram_start_addr(void);
++
++void __init create_root_nfs_cmdline( char *cmdline )
++{
++ char root_nfs_cl[] = "root=/dev/nfs nfsroot=%s:" CONFIG_ROOT_NFS_DIR
++ " ip=%s:%s::%s::eth0:off rw";
++
++ char *localip = NULL;
++ char *hostip = NULL;
++ char mask[16] = "";
++ PNVRAM_DATA pNvramData = (PNVRAM_DATA) get_nvram_start_addr();
++ char bootline[128] = "";
++ char *p = bootline;
++
++ memcpy(bootline, pNvramData->szBootline, sizeof(bootline));
++ while( *p )
++ {
++ if( p[0] == 'e' && p[1] == '=' )
++ {
++ /* Found local ip address */
++ p += 2;
++ localip = p;
++ while( *p && *p != ' ' && *p != ':' )
++ p++;
++ if( *p == ':' )
++ {
++ /* Found network mask (eg FFFFFF00 */
++ *p++ = '\0';
++ sprintf( mask, "%u.%u.%u.%u", HEXBYTE(p), HEXBYTE(p + 2),
++ HEXBYTE(p + 4), HEXBYTE(p + 6) );
++ p += 4;
++ }
++ else if( *p == ' ' )
++ *p++ = '\0';
++ }
++ else if( p[0] == 'h' && p[1] == '=' )
++ {
++ /* Found host ip address */
++ p += 2;
++ hostip = p;
++ while( *p && *p != ' ' )
++ p++;
++ if( *p == ' ' )
++ *p++ = '\0';
++ }
++ else
++ p++;
++ }
++
++ if( localip && hostip )
++ sprintf( cmdline, root_nfs_cl, hostip, localip, hostip, mask );
++}
++#endif
++
++#if defined(CONFIG_BCM96348)
++/* *********************************************************************
++ * calculateCpuSpeed()
++ * Calculate the BCM6348 CPU speed by reading the PLL strap register
++ * and applying the following formula:
++ * cpu_clk = (.25 * 64MHz freq) * (N1 + 1) * (N2 + 2) / (M1_CPU + 1)
++ * Input parameters:
++ * none
++ * Return value:
++ * none
++ ********************************************************************* */
++void __init calculateCpuSpeed(void)
++{
++ UINT32 pllStrap = PERF->PllStrap;
++ int n1 = (pllStrap & PLL_N1_MASK) >> PLL_N1_SHFT;
++ int n2 = (pllStrap & PLL_N2_MASK) >> PLL_N2_SHFT;
++ int m1cpu = (pllStrap & PLL_M1_CPU_MASK) >> PLL_M1_CPU_SHFT;
++
++ cpu_speed = (16 * (n1 + 1) * (n2 + 2) / (m1cpu + 1)) * 1000000;
++}
++#endif
++
+diff -urN linux-2.6.8.1/arch/mips/brcm-boards/bcm963xx/ser_init.c linux-2.6.8.1-brcm63xx/arch/mips/brcm-boards/bcm963xx/ser_init.c
+--- linux-2.6.8.1/arch/mips/brcm-boards/bcm963xx/ser_init.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.8.1-brcm63xx/arch/mips/brcm-boards/bcm963xx/ser_init.c 2006-06-26 09:07:08.000000000 +0200
+@@ -0,0 +1,180 @@
++/*
++<:copyright-gpl
++ Copyright 2004 Broadcom Corp. All Rights Reserved.
++
++ This program is free software; you can distribute it and/or modify it
++ under the terms of the GNU General Public License (Version 2) as
++ published by the Free Software Foundation.
++
++ This program is distributed in the hope it will be useful, but WITHOUT
++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
++ for more details.
++
++ You should have received a copy of the GNU General Public License along
++ with this program; if not, write to the Free Software Foundation, Inc.,
++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
++:>
++*/
++/*
++ * Broadcom bcm63xx serial port initialization, also prepare for printk
++ * by registering with console_init
++ *
++ */
++
++#include <linux/config.h>
++#include <linux/init.h>
++#include <linux/interrupt.h>
++#include <linux/kernel.h>
++#include <linux/types.h>
++#include <linux/console.h>
++#include <linux/sched.h>
++
++#include <asm/addrspace.h>
++#include <asm/irq.h>
++#include <asm/reboot.h>
++#include <asm/gdb-stub.h>
++#include <asm/mc146818rtc.h>
++
++#include <bcm_map_part.h>
++#include <board.h>
++
++#define SER63XX_DEFAULT_BAUD 115200
++#define BD_BCM63XX_TIMER_CLOCK_INPUT (FPERIPH)
++#define stUart ((volatile Uart * const) UART_BASE)
++
++// Transmit interrupts
++#define TXINT (TXFIFOEMT | TXUNDERR | TXOVFERR)
++// Receive interrupts
++#define RXINT (RXFIFONE | RXOVFERR)
++
++/* --------------------------------------------------------------------------
++ Name: serial_init
++ Purpose: Initalize the UART
++-------------------------------------------------------------------------- */
++void __init serial_init(void)
++{
++ UINT32 tmpVal = SER63XX_DEFAULT_BAUD;
++ ULONG clockFreqHz;
++
++#if defined(CONFIG_BCM96345)
++ // Make sure clock is ticking
++ PERF->blkEnables |= UART_CLK_EN;
++#endif
++
++ /* Dissable channel's receiver and transmitter. */
++ stUart->control &= ~(BRGEN|TXEN|RXEN);
++
++ /*--------------------------------------------------------------------*/
++ /* Write the table value to the clock select register. */
++ /* DPullen - this is the equation to use: */
++ /* value = clockFreqHz / baud / 32-1; */
++ /* (snmod) Actually you should also take into account any necessary */
++ /* rounding. Divide by 16, look at lsb, if 0, divide by 2 */
++ /* and subtract 1. If 1, just divide by 2 */
++ /*--------------------------------------------------------------------*/
++ clockFreqHz = BD_BCM63XX_TIMER_CLOCK_INPUT;
++ tmpVal = (clockFreqHz / tmpVal) / 16;
++ if( tmpVal & 0x01 )
++ tmpVal /= 2; //Rounding up, so sub is already accounted for
++ else
++ tmpVal = (tmpVal / 2) - 1; // Rounding down so we must sub 1
++ stUart->baudword = tmpVal;
++
++ /* Finally, re-enable the transmitter and receiver. */
++ stUart->control |= (BRGEN|TXEN|RXEN);
++
++ stUart->config = (BITS8SYM | ONESTOP);
++ // Set the FIFO interrupt depth ... stUart->fifocfg = 0xAA;
++ stUart->fifoctl = RSTTXFIFOS | RSTRXFIFOS;
++ stUart->intMask = 0;
++ stUart->intMask = RXINT | TXINT;
++}
++
++
++/* prom_putc()
++ * Output a character to the UART
++ */
++void prom_putc(char c)
++{
++ /* Wait for Tx uffer to empty */
++ while (! (READ16(stUart->intStatus) & TXFIFOEMT));
++ /* Send character */
++ stUart->Data = c;
++}
++
++/* prom_puts()
++ * Write a string to the UART
++ */
++void prom_puts(const char *s)
++{
++ while (*s) {
++ if (*s == '\n') {
++ prom_putc('\r');
++ }
++ prom_putc(*s++);
++ }
++}
++
++
++/* prom_getc_nowait()
++ * Returns a character from the UART
++ * Returns -1 if no characters available or corrupted
++ */
++int prom_getc_nowait(void)
++{
++ uint16 uStatus;
++ int cData = -1;
++
++ uStatus = READ16(stUart->intStatus);
++
++ if (uStatus & RXFIFONE) { /* Do we have a character? */
++ cData = READ16(stUart->Data) & 0xff; /* Read character */
++ if (uStatus & (RXFRAMERR | RXPARERR)) { /* If we got an error, throw it away */
++ cData = -1;
++ }
++ }
++
++ return cData;
++}
++
++/* prom_getc()
++ * Returns a charcter from the serial port
++ * Will block until it receives a valid character
++*/
++char prom_getc(void)
++{
++ int cData = -1;
++
++ /* Loop until we get a valid character */
++ while(cData == -1) {
++ cData = prom_getc_nowait();
++ }
++ return (char) cData;
++}
++
++/* prom_testc()
++ * Returns 0 if no characters available
++ */
++int prom_testc(void)
++{
++ uint16 uStatus;
++
++ uStatus = READ16(stUart->intStatus);
++
++ return (uStatus & RXFIFONE);
++}
++
++#if CONFIG_REMOTE_DEBUG
++/* Prevent other code from writing to the serial port */
++void _putc(char c) { }
++void _puts(const char *ptr) { }
++#else
++/* Low level outputs call prom routines */
++void _putc(char c) {
++ prom_putc(c);
++}
++void _puts(const char *ptr) {
++ prom_puts(ptr);
++}
++#endif
+diff -urN linux-2.6.8.1/arch/mips/brcm-boards/bcm963xx/setup.c linux-2.6.8.1-brcm63xx/arch/mips/brcm-boards/bcm963xx/setup.c
+--- linux-2.6.8.1/arch/mips/brcm-boards/bcm963xx/setup.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.8.1-brcm63xx/arch/mips/brcm-boards/bcm963xx/setup.c 2006-06-26 09:07:08.000000000 +0200
+@@ -0,0 +1,519 @@
++/*
++<:copyright-gpl
++ Copyright 2002 Broadcom Corp. All Rights Reserved.
++
++ This program is free software; you can distribute it and/or modify it
++ under the terms of the GNU General Public License (Version 2) as
++ published by the Free Software Foundation.
++
++ This program is distributed in the hope it will be useful, but WITHOUT
++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
++ for more details.
++
++ You should have received a copy of the GNU General Public License along
++ with this program; if not, write to the Free Software Foundation, Inc.,
++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
++:>
++*/
++/*
++ * Generic setup routines for Broadcom 963xx MIPS boards
++ */
++
++#include <linux/config.h>
++#include <linux/init.h>
++#include <linux/interrupt.h>
++#include <linux/kernel.h>
++#include <linux/kdev_t.h>
++#include <linux/types.h>
++#include <linux/console.h>
++#include <linux/sched.h>
++#include <linux/mm.h>
++#include <linux/slab.h>
++#include <linux/module.h>
++
++#include <asm/addrspace.h>
++#include <asm/bcache.h>
++#include <asm/irq.h>
++#include <asm/time.h>
++#include <asm/reboot.h>
++#include <asm/gdb-stub.h>
++
++extern void brcm_timer_setup(struct irqaction *irq);
++extern unsigned long getMemorySize(void);
++
++#if defined(CONFIG_BCM96348) && defined(CONFIG_PCI)
++#include <linux/pci.h>
++#include <linux/delay.h>
++#include <bcm_map_part.h>
++#include <bcmpci.h>
++
++static volatile MpiRegisters * mpi = (MpiRegisters *)(MPI_BASE);
++#endif
++
++/* This function should be in a board specific directory. For now,
++ * assume that all boards that include this file use a Broadcom chip
++ * with a soft reset bit in the PLL control register.
++ */
++static void brcm_machine_restart(char *command)
++{
++ const unsigned long ulSoftReset = 0x00000001;
++ unsigned long *pulPllCtrl = (unsigned long *) 0xfffe0008;
++ *pulPllCtrl |= ulSoftReset;
++}
++
++static void brcm_machine_halt(void)
++{
++ printk("System halted\n");
++ while (1);
++}
++
++#if defined(CONFIG_BCM96348) && defined(CONFIG_PCI)
++
++static void mpi_SetLocalPciConfigReg(uint32 reg, uint32 value)
++{
++ /* write index then value */
++ mpi->pcicfgcntrl = PCI_CFG_REG_WRITE_EN + reg;;
++ mpi->pcicfgdata = value;
++}
++
++static uint32 mpi_GetLocalPciConfigReg(uint32 reg)
++{
++ /* write index then get value */
++ mpi->pcicfgcntrl = PCI_CFG_REG_WRITE_EN + reg;;
++ return mpi->pcicfgdata;
++}
++
++/*
++ * mpi_ResetPcCard: Set/Reset the PcCard
++ */
++static void mpi_ResetPcCard(int cardtype, BOOL bReset)
++{
++ if (cardtype == MPI_CARDTYPE_NONE) {
++ return;
++ }
++
++ if (cardtype == MPI_CARDTYPE_CARDBUS) {
++ bReset = ! bReset;
++ }
++
++ if (bReset) {
++ mpi->pcmcia_cntl1 = (mpi->pcmcia_cntl1 & ~PCCARD_CARD_RESET);
++ } else {
++ mpi->pcmcia_cntl1 = (mpi->pcmcia_cntl1 | PCCARD_CARD_RESET);
++ }
++}
++
++/*
++ * mpi_ConfigCs: Configure an MPI/EBI chip select
++ */
++static void mpi_ConfigCs(uint32 cs, uint32 base, uint32 size, uint32 flags)
++{
++ mpi->cs[cs].base = ((base & 0x1FFFFFFF) | size);
++ mpi->cs[cs].config = flags;
++}
++
++/*
++ * mpi_InitPcmciaSpace
++ */
++static void mpi_InitPcmciaSpace(void)
++{
++ // ChipSelect 4 controls PCMCIA Memory accesses
++ mpi_ConfigCs(PCMCIA_COMMON_BASE, pcmciaMem, EBI_SIZE_1M, (EBI_WORD_WIDE|EBI_ENABLE));
++ // ChipSelect 5 controls PCMCIA Attribute accesses
++ mpi_ConfigCs(PCMCIA_ATTRIBUTE_BASE, pcmciaAttr, EBI_SIZE_1M, (EBI_WORD_WIDE|EBI_ENABLE));
++ // ChipSelect 6 controls PCMCIA I/O accesses
++ mpi_ConfigCs(PCMCIA_IO_BASE, pcmciaIo, EBI_SIZE_64K, (EBI_WORD_WIDE|EBI_ENABLE));
++
++ mpi->pcmcia_cntl2 = ((PCMCIA_ATTR_ACTIVE << RW_ACTIVE_CNT_BIT) |
++ (PCMCIA_ATTR_INACTIVE << INACTIVE_CNT_BIT) |
++ (PCMCIA_ATTR_CE_SETUP << CE_SETUP_CNT_BIT) |
++ (PCMCIA_ATTR_CE_HOLD << CE_HOLD_CNT_BIT));
++
++ mpi->pcmcia_cntl2 |= (PCMCIA_HALFWORD_EN | PCMCIA_BYTESWAP_DIS);
++}
++
++/*
++ * cardtype_vcc_detect: PC Card's card detect and voltage sense connection
++ *
++ * CD1#/ CD2#/ VS1#/ VS2#/ Card Initial Vcc
++ * CCD1# CCD2# CVS1 CVS2 Type
++ *
++ * GND GND open open 16-bit 5 vdc
++ *
++ * GND GND GND open 16-bit 3.3 vdc
++ *
++ * GND GND open GND 16-bit x.x vdc
++ *
++ * GND GND GND GND 16-bit 3.3 & x.x vdc
++ *
++ *====================================================================
++ *
++ * CVS1 GND CCD1# open CardBus 3.3 vdc
++ *
++ * GND CVS2 open CCD2# CardBus x.x vdc
++ *
++ * GND CVS1 CCD2# open CardBus y.y vdc
++ *
++ * GND CVS2 GND CCD2# CardBus 3.3 & x.x vdc
++ *
++ * CVS2 GND open CCD1# CardBus x.x & y.y vdc
++ *
++ * GND CVS1 CCD2# open CardBus 3.3, x.x & y.y vdc
++ *
++ */
++static int cardtype_vcc_detect(void)
++{
++ uint32 data32;
++ int cardtype;
++
++ cardtype = MPI_CARDTYPE_NONE;
++ mpi->pcmcia_cntl1 = 0x0000A000; // Turn on the output enables and drive
++ // the CVS pins to 0.
++ data32 = mpi->pcmcia_cntl1;
++ switch (data32 & 0x00000003) // Test CD1# and CD2#, see if card is plugged in.
++ {
++ case 0x00000003: // No Card is in the slot.
++ printk("mpi: No Card is in the PCMCIA slot\n");
++ break;
++
++ case 0x00000002: // Partial insertion, No CD2#.
++ printk("mpi: Card in the PCMCIA slot partial insertion, no CD2 signal\n");
++ break;
++
++ case 0x00000001: // Partial insertion, No CD1#.
++ printk("mpi: Card in the PCMCIA slot partial insertion, no CD1 signal\n");
++ break;
++
++ case 0x00000000:
++ mpi->pcmcia_cntl1 = 0x0000A0C0; // Turn off the CVS output enables and
++ // float the CVS pins.
++ mdelay(1);
++ data32 = mpi->pcmcia_cntl1;
++ // Read the Register.
++ switch (data32 & 0x0000000C) // See what is on the CVS pins.
++ {
++ case 0x00000000: // CVS1 and CVS2 are tied to ground, only 1 option.
++ printk("mpi: Detected 3.3 & x.x 16-bit PCMCIA card\n");
++ cardtype = MPI_CARDTYPE_PCMCIA;
++ break;
++
++ case 0x00000004: // CVS1 is open or tied to CCD1/CCD2 and CVS2 is tied to ground.
++ // 2 valid voltage options.
++ switch (data32 & 0x00000003) // Test the values of CCD1 and CCD2.
++ {
++ case 0x00000003: // CCD1 and CCD2 are tied to 1 of the CVS pins.
++ // This is not a valid combination.
++ printk("mpi: Unknown card plugged into slot\n");
++ break;
++
++ case 0x00000002: // CCD2 is tied to either CVS1 or CVS2.
++ mpi->pcmcia_cntl1 = 0x0000A080; // Drive CVS1 to a 0.
++ mdelay(1);
++ data32 = mpi->pcmcia_cntl1;
++ if (data32 & 0x00000002) { // CCD2 is tied to CVS2, not valid.
++ printk("mpi: Unknown card plugged into slot\n");
++ } else { // CCD2 is tied to CVS1.
++ printk("mpi: Detected 3.3, x.x and y.y Cardbus card\n");
++ cardtype = MPI_CARDTYPE_CARDBUS;
++ }
++ break;
++
++ case 0x00000001: // CCD1 is tied to either CVS1 or CVS2.
++ // This is not a valid combination.
++ printk("mpi: Unknown card plugged into slot\n");
++ break;
++
++ case 0x00000000: // CCD1 and CCD2 are tied to ground.
++ printk("mpi: Detected x.x vdc 16-bit PCMCIA card\n");
++ cardtype = MPI_CARDTYPE_PCMCIA;
++ break;
++ }
++ break;
++
++ case 0x00000008: // CVS2 is open or tied to CCD1/CCD2 and CVS1 is tied to ground.
++ // 2 valid voltage options.
++ switch (data32 & 0x00000003) // Test the values of CCD1 and CCD2.
++ {
++ case 0x00000003: // CCD1 and CCD2 are tied to 1 of the CVS pins.
++ // This is not a valid combination.
++ printk("mpi: Unknown card plugged into slot\n");
++ break;
++
++ case 0x00000002: // CCD2 is tied to either CVS1 or CVS2.
++ mpi->pcmcia_cntl1 = 0x0000A040; // Drive CVS2 to a 0.
++ mdelay(1);
++ data32 = mpi->pcmcia_cntl1;
++ if (data32 & 0x00000002) { // CCD2 is tied to CVS1, not valid.
++ printk("mpi: Unknown card plugged into slot\n");
++ } else {// CCD2 is tied to CVS2.
++ printk("mpi: Detected 3.3 and x.x Cardbus card\n");
++ cardtype = MPI_CARDTYPE_CARDBUS;
++ }
++ break;
++
++ case 0x00000001: // CCD1 is tied to either CVS1 or CVS2.
++ // This is not a valid combination.
++ printk("mpi: Unknown card plugged into slot\n");
++ break;
++
++ case 0x00000000: // CCD1 and CCD2 are tied to ground.
++ cardtype = MPI_CARDTYPE_PCMCIA;
++ printk("mpi: Detected 3.3 vdc 16-bit PCMCIA card\n");
++ break;
++ }
++ break;
++
++ case 0x0000000C: // CVS1 and CVS2 are open or tied to CCD1/CCD2.
++ // 5 valid voltage options.
++
++ switch (data32 & 0x00000003) // Test the values of CCD1 and CCD2.
++ {
++ case 0x00000003: // CCD1 and CCD2 are tied to 1 of the CVS pins.
++ // This is not a valid combination.
++ printk("mpi: Unknown card plugged into slot\n");
++ break;
++
++ case 0x00000002: // CCD2 is tied to either CVS1 or CVS2.
++ // CCD1 is tied to ground.
++ mpi->pcmcia_cntl1 = 0x0000A040; // Drive CVS2 to a 0.
++ mdelay(1);
++ data32 = mpi->pcmcia_cntl1;
++ if (data32 & 0x00000002) { // CCD2 is tied to CVS1.
++ printk("mpi: Detected y.y vdc Cardbus card\n");
++ } else { // CCD2 is tied to CVS2.
++ printk("mpi: Detected x.x vdc Cardbus card\n");
++ }
++ cardtype = MPI_CARDTYPE_CARDBUS;
++ break;
++
++ case 0x00000001: // CCD1 is tied to either CVS1 or CVS2.
++ // CCD2 is tied to ground.
++
++ mpi->pcmcia_cntl1 = 0x0000A040; // Drive CVS2 to a 0.
++ mdelay(1);
++ data32 = mpi->pcmcia_cntl1;
++ if (data32 & 0x00000001) {// CCD1 is tied to CVS1.
++ printk("mpi: Detected 3.3 vdc Cardbus card\n");
++ } else { // CCD1 is tied to CVS2.
++ printk("mpi: Detected x.x and y.y Cardbus card\n");
++ }
++ cardtype = MPI_CARDTYPE_CARDBUS;
++ break;
++
++ case 0x00000000: // CCD1 and CCD2 are tied to ground.
++ cardtype = MPI_CARDTYPE_PCMCIA;
++ printk("mpi: Detected 5 vdc 16-bit PCMCIA card\n");
++ break;
++ }
++ break;
++
++ default:
++ printk("mpi: Unknown card plugged into slot\n");
++ break;
++
++ }
++ }
++ return cardtype;
++}
++
++/*
++ * mpi_DetectPcCard: Detect the plugged in PC-Card
++ * Return: < 0 => Unknown card detected
++ * 0 => No card detected
++ * 1 => 16-bit card detected
++ * 2 => 32-bit CardBus card detected
++ */
++static int mpi_DetectPcCard(void)
++{
++ int cardtype;
++
++ cardtype = cardtype_vcc_detect();
++ switch(cardtype) {
++ case MPI_CARDTYPE_PCMCIA:
++ mpi->pcmcia_cntl1 &= ~0x0000e000; // disable enable bits
++ //mpi->pcmcia_cntl1 = (mpi->pcmcia_cntl1 & ~PCCARD_CARD_RESET);
++ mpi->pcmcia_cntl1 |= (PCMCIA_ENABLE | PCMCIA_GPIO_ENABLE);
++ mpi_InitPcmciaSpace();
++ mpi_ResetPcCard(cardtype, FALSE);
++ // Hold card in reset for 10ms
++ mdelay(10);
++ mpi_ResetPcCard(cardtype, TRUE);
++ // Let card come out of reset
++ mdelay(100);
++ break;
++ case MPI_CARDTYPE_CARDBUS:
++ // 8 => CardBus Enable
++ // 1 => PCI Slot Number
++ // C => Float VS1 & VS2
++ mpi->pcmcia_cntl1 = (mpi->pcmcia_cntl1 & 0xFFFF0000) |
++ CARDBUS_ENABLE |
++ (CARDBUS_SLOT << 8)|
++ VS2_OEN |
++ VS1_OEN;
++ /* access to this memory window will be to/from CardBus */
++ mpi->l2pmremap1 |= CARDBUS_MEM;
++
++ // Need to reset the Cardbus Card. There's no CardManager to do this,
++ // and we need to be ready for PCI configuration.
++ mpi_ResetPcCard(cardtype, FALSE);
++ // Hold card in reset for 10ms
++ mdelay(10);
++ mpi_ResetPcCard(cardtype, TRUE);
++ // Let card come out of reset
++ mdelay(100);
++ break;
++ default:
++ break;
++ }
++ return cardtype;
++}
++
++static int mpi_init(void)
++{
++ unsigned long data;
++ unsigned int chipid;
++ unsigned int chiprev;
++ unsigned int sdramsize;
++
++ chipid = (PERF->RevID & 0xFFFF0000) >> 16;
++ chiprev = (PERF->RevID & 0xFF);
++ sdramsize = getMemorySize();
++ /*
++ * Init the pci interface
++ */
++ data = GPIO->GPIOMode; // GPIO mode register
++ data |= GROUP2_PCI | GROUP1_MII_PCCARD; // PCI internal arbiter + Cardbus
++ GPIO->GPIOMode = data; // PCI internal arbiter
++
++ /*
++ * In the BCM6348 CardBus support is defaulted to Slot 0
++ * because there is no external IDSEL for CardBus. To disable
++ * the CardBus and allow a standard PCI card in Slot 0
++ * set the cbus_idsel field to 0x1f.
++ */
++ /*
++ uData = mpi->pcmcia_cntl1;
++ uData |= CARDBUS_IDSEL;
++ mpi->pcmcia_cntl1 = uData;
++ */
++ // Setup PCI I/O Window range. Give 64K to PCI I/O
++ mpi->l2piorange = ~(BCM_PCI_IO_SIZE_64KB-1);
++ // UBUS to PCI I/O base address
++ mpi->l2piobase = BCM_PCI_IO_BASE & BCM_PCI_ADDR_MASK;
++ // UBUS to PCI I/O Window remap
++ mpi->l2pioremap = (BCM_PCI_IO_BASE | MEM_WINDOW_EN);
++
++ // enable PCI related GPIO pins and data swap between system and PCI bus
++ mpi->locbuscntrl = (EN_PCI_GPIO | DIR_U2P_NOSWAP);
++
++ /* Enable 6348 BusMaster and Memory access mode */
++ data = mpi_GetLocalPciConfigReg(PCI_COMMAND);
++ data |= (PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
++ mpi_SetLocalPciConfigReg(PCI_COMMAND, data);
++
++ /* Configure two 16 MByte PCI to System memory regions. */
++ /* These memory regions are used when PCI device is a bus master */
++ /* Accesses to the SDRAM from PCI bus will be "byte swapped" for this region */
++ mpi_SetLocalPciConfigReg(PCI_BASE_ADDRESS_3, BCM_HOST_MEM_SPACE1);
++ mpi->sp0remap = 0x0;
++
++ /* Accesses to the SDRAM from PCI bus will not be "byte swapped" for this region */
++ mpi_SetLocalPciConfigReg(PCI_BASE_ADDRESS_4, BCM_HOST_MEM_SPACE2);
++ mpi->sp1remap = 0x0;
++ mpi->pcimodesel |= (PCI_BAR2_NOSWAP | 0x40);
++
++ if ((chipid == 0x6348) && (chiprev == 0xb0)) {
++ mpi->sp0range = ~(sdramsize-1);
++ mpi->sp1range = ~(sdramsize-1);
++ }
++ /*
++ * Change 6348 PCI Cfg Reg. offset 0x40 to PCI memory read retry count infinity
++ * by set 0 in bit 8~15. This resolve read Bcm4306 srom return 0xffff in
++ * first read.
++ */
++ data = mpi_GetLocalPciConfigReg(BRCM_PCI_CONFIG_TIMER);
++ data &= ~BRCM_PCI_CONFIG_TIMER_RETRY_MASK;
++ data |= 0x00000080;
++ mpi_SetLocalPciConfigReg(BRCM_PCI_CONFIG_TIMER, data);
++
++ /* enable pci interrupt */
++ mpi->locintstat |= (EXT_PCI_INT << 16);
++
++ mpi_DetectPcCard();
++
++ ioport_resource.start = BCM_PCI_IO_BASE;
++ ioport_resource.end = BCM_PCI_IO_BASE + BCM_PCI_IO_SIZE_64KB;
++
++#if defined(CONFIG_USB)
++ PERF->blkEnables |= USBH_CLK_EN;
++ mdelay(100);
++ *USBH_NON_OHCI = NON_OHCI_BYTE_SWAP;
++#endif
++
++ return 0;
++}
++#endif
++
++static int __init brcm63xx_setup(void)
++{
++ extern int panic_timeout;
++
++ _machine_restart = brcm_machine_restart;
++ _machine_halt = brcm_machine_halt;
++ _machine_power_off = brcm_machine_halt;
++
++ board_timer_setup = brcm_timer_setup;
++
++ panic_timeout = 180;
++
++#if defined(CONFIG_BCM96348) && defined(CONFIG_PCI)
++ /* mpi initialization */
++ mpi_init();
++#endif
++ return 0;
++}
++
++early_initcall(brcm63xx_setup);
++
++/***************************************************************************
++ * C++ New and delete operator functions
++ ***************************************************************************/
++
++/* void *operator new(unsigned int sz) */
++void *_Znwj(unsigned int sz)
++{
++ return( kmalloc(sz, GFP_KERNEL) );
++}
++
++/* void *operator new[](unsigned int sz)*/
++void *_Znaj(unsigned int sz)
++{
++ return( kmalloc(sz, GFP_KERNEL) );
++}
++
++/* placement new operator */
++/* void *operator new (unsigned int size, void *ptr) */
++void *ZnwjPv(unsigned int size, void *ptr)
++{
++ return ptr;
++}
++
++/* void operator delete(void *m) */
++void _ZdlPv(void *m)
++{
++ kfree(m);
++}
++
++/* void operator delete[](void *m) */
++void _ZdaPv(void *m)
++{
++ kfree(m);
++}
++
++EXPORT_SYMBOL(_Znwj);
++EXPORT_SYMBOL(_Znaj);
++EXPORT_SYMBOL(ZnwjPv);
++EXPORT_SYMBOL(_ZdlPv);
++EXPORT_SYMBOL(_ZdaPv);
++
+diff -urN linux-2.6.8.1/arch/mips/brcm-boards/bcm963xx/time.c linux-2.6.8.1-brcm63xx/arch/mips/brcm-boards/bcm963xx/time.c
+--- linux-2.6.8.1/arch/mips/brcm-boards/bcm963xx/time.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.8.1-brcm63xx/arch/mips/brcm-boards/bcm963xx/time.c 2006-06-26 09:07:08.000000000 +0200
+@@ -0,0 +1,277 @@
++/*
++<:copyright-gpl
++ Copyright 2004 Broadcom Corp. All Rights Reserved.
++
++ This program is free software; you can distribute it and/or modify it
++ under the terms of the GNU General Public License (Version 2) as
++ published by the Free Software Foundation.
++
++ This program is distributed in the hope it will be useful, but WITHOUT
++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
++ for more details.
++
++ You should have received a copy of the GNU General Public License along
++ with this program; if not, write to the Free Software Foundation, Inc.,
++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
++:>
++*/
++/*
++ * Setup time for Broadcom 963xx MIPS boards
++ */
++
++#include <linux/config.h>
++#include <linux/init.h>
++#include <linux/kernel_stat.h>
++#include <linux/sched.h>
++#include <linux/spinlock.h>
++#include <linux/interrupt.h>
++#include <linux/module.h>
++#include <linux/time.h>
++#include <linux/timex.h>
++
++#include <asm/mipsregs.h>
++#include <asm/ptrace.h>
++#include <asm/div64.h>
++#include <asm/time.h>
++
++#include <bcm_map_part.h>
++#include <bcm_intr.h>
++
++unsigned long r4k_interval; /* Amount to increment compare reg each time */
++static unsigned long r4k_cur; /* What counter should be at next timer irq */
++
++/* Cycle counter value at the previous timer interrupt.. */
++static unsigned int timerhi = 0, timerlo = 0;
++
++extern volatile unsigned long wall_jiffies;
++
++/* Optional board-specific timer routine */
++void (*board_timer_interrupt)(int irq, void *dev_id, struct pt_regs * regs);
++
++static inline void ack_r4ktimer(unsigned long newval)
++{
++ write_c0_compare(newval);
++}
++
++/*
++ * There are a lot of conceptually broken versions of the MIPS timer interrupt
++ * handler floating around. This one is rather different, but the algorithm
++ * is provably more robust.
++ */
++static irqreturn_t brcm_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
++{
++ unsigned int count;
++
++ if (r4k_interval == 0)
++ goto null;
++
++ do {
++ do_timer(regs);
++
++ if (board_timer_interrupt)
++ board_timer_interrupt(irq, dev_id, regs);
++
++ r4k_cur += r4k_interval;
++ ack_r4ktimer(r4k_cur);
++
++ } while (((count = (unsigned long)read_c0_count())
++ - r4k_cur) < 0x7fffffff);
++
++ if (!jiffies) {
++ /*
++ * If jiffies has overflowed in this timer_interrupt we must
++ * update the timer[hi]/[lo] to make do_fast_gettimeoffset()
++ * quotient calc still valid. -arca
++ */
++ timerhi = timerlo = 0;
++ } else {
++ /*
++ * The cycle counter is only 32 bit which is good for about
++ * a minute at current count rates of upto 150MHz or so.
++ */
++ timerhi += (count < timerlo); /* Wrap around */
++ timerlo = count;
++ }
++
++ return IRQ_HANDLED;
++
++null:
++ ack_r4ktimer(0);
++ return IRQ_NONE;
++}
++
++static struct irqaction brcm_timer_action = {
++ .handler = brcm_timer_interrupt,
++ .flags = SA_INTERRUPT,
++ .mask = CPU_MASK_NONE,
++ .name = "timer",
++ .next = NULL,
++ .dev_id = brcm_timer_interrupt,
++};
++
++
++void __init brcm_timer_setup(struct irqaction *irq)
++{
++ r4k_cur = (read_c0_count() + r4k_interval);
++ write_c0_compare(r4k_cur);
++
++ /* we are using the cpu counter for timer interrupts */
++ irq->handler = no_action; /* we use our own handler */
++ setup_irq(MIPS_TIMER_INT, &brcm_timer_action);
++ set_c0_status(IE_IRQ5);
++}
++
++#if 0
++/* This is for machines which generate the exact clock. */
++#define USECS_PER_JIFFY (1000000/HZ)
++#define USECS_PER_JIFFY_FRAC (0x100000000*1000000/HZ&0xffffffff)
++
++static void call_do_div64_32( unsigned long *res, unsigned int high,
++ unsigned int low, unsigned long base )
++{
++ do_div64_32(*res, high, low, base);
++}
++
++/*
++ * FIXME: Does playing with the RP bit in c0_status interfere with this code?
++ */
++static unsigned long do_fast_gettimeoffset(void)
++{
++ u32 count;
++ unsigned long res, tmp;
++
++ /* Last jiffy when do_fast_gettimeoffset() was called. */
++ static unsigned long last_jiffies=0;
++ unsigned long quotient;
++
++ /*
++ * Cached "1/(clocks per usec)*2^32" value.
++ * It has to be recalculated once each jiffy.
++ */
++ static unsigned long cached_quotient=0;
++
++ tmp = jiffies;
++
++ quotient = cached_quotient;
++
++ if (tmp && last_jiffies != tmp) {
++ last_jiffies = tmp;
++#ifdef CONFIG_CPU_MIPS32
++ if (last_jiffies != 0) {
++
++ unsigned long r0;
++ /* gcc 3.0.1 gets an internal compiler error if there are two
++ * do_div64_32 inline macros. To work around this problem,
++ * do_div64_32 is called as a function.
++ */
++ call_do_div64_32(&r0, timerhi, timerlo, tmp);
++ call_do_div64_32("ient, USECS_PER_JIFFY,
++ USECS_PER_JIFFY_FRAC, r0);
++
++ cached_quotient = quotient;
++
++ }
++#else
++ __asm__(".set\tnoreorder\n\t"
++ ".set\tnoat\n\t"
++ ".set\tmips3\n\t"
++ "lwu\t%0,%2\n\t"
++ "dsll32\t$1,%1,0\n\t"
++ "or\t$1,$1,%0\n\t"
++ "ddivu\t$0,$1,%3\n\t"
++ "mflo\t$1\n\t"
++ "dsll32\t%0,%4,0\n\t"
++ "nop\n\t"
++ "ddivu\t$0,%0,$1\n\t"
++ "mflo\t%0\n\t"
++ ".set\tmips0\n\t"
++ ".set\tat\n\t"
++ ".set\treorder"
++ :"=&r" (quotient)
++ :"r" (timerhi),
++ "m" (timerlo),
++ "r" (tmp),
++ "r" (USECS_PER_JIFFY)
++ :"$1");
++ cached_quotient = quotient;
++#endif
++ }
++
++ /* Get last timer tick in absolute kernel time */
++ count = read_c0_count();
++
++ /* .. relative to previous jiffy (32 bits is enough) */
++ count -= timerlo;
++
++ __asm__("multu\t%1,%2\n\t"
++ "mfhi\t%0"
++ :"=r" (res)
++ :"r" (count),
++ "r" (quotient));
++
++ /*
++ * Due to possible jiffies inconsistencies, we need to check
++ * the result so that we'll get a timer that is monotonic.
++ */
++ if (res >= USECS_PER_JIFFY)
++ res = USECS_PER_JIFFY-1;
++
++ return res;
++}
++
++void do_gettimeofday(struct timeval *tv)
++{
++ unsigned int flags;
++
++ read_lock_irqsave (&xtime_lock, flags);
++ tv->tv_sec = xtime.tv_sec;
++ tv->tv_usec = xtime.tv_nsec/1000;
++ tv->tv_usec += do_fast_gettimeoffset();
++
++ /*
++ * xtime is atomically updated in timer_bh. jiffies - wall_jiffies
++ * is nonzero if the timer bottom half hasnt executed yet.
++ */
++ if (jiffies - wall_jiffies)
++ tv->tv_usec += USECS_PER_JIFFY;
++
++ read_unlock_irqrestore (&xtime_lock, flags);
++
++ if (tv->tv_usec >= 1000000) {
++ tv->tv_usec -= 1000000;
++ tv->tv_sec++;
++ }
++}
++
++EXPORT_SYMBOL(do_gettimeofday);
++
++int do_settimeofday(struct timespec *tv)
++{
++ write_lock_irq (&xtime_lock);
++
++ /* This is revolting. We need to set the xtime.tv_usec correctly.
++ * However, the value in this location is is value at the last tick.
++ * Discover what correction gettimeofday would have done, and then
++ * undo it!
++ */
++ tv->tv_nsec -= do_fast_gettimeoffset()*NSEC_PER_USEC;
++
++ if (tv->tv_nsec < 0) {
++ tv->tv_nsec += 1000000*NSEC_PER_USEC;
++ tv->tv_sec--;
++ }
++
++ xtime.tv_sec = tv->tv_sec;
++ xtime.tv_nsec = tv->tv_nsec;
++ time_adjust = 0; /* stop active adjtime() */
++ time_status |= STA_UNSYNC;
++ time_maxerror = NTP_PHASE_LIMIT;
++ time_esterror = NTP_PHASE_LIMIT;
++
++ write_unlock_irq (&xtime_lock);
++}
++
++EXPORT_SYMBOL(do_settimeofday);
++
++#endif
+diff -urN linux-2.6.8.1/arch/mips/brcm-boards/generic/Makefile linux-2.6.8.1-brcm63xx/arch/mips/brcm-boards/generic/Makefile
+--- linux-2.6.8.1/arch/mips/brcm-boards/generic/Makefile 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.8.1-brcm63xx/arch/mips/brcm-boards/generic/Makefile 2006-06-26 09:07:08.000000000 +0200
+@@ -0,0 +1,11 @@
++#
++# Makefile for generic Broadcom MIPS boards
++#
++# Copyright (C) 2001 Broadcom Corporation
++#
++obj-y := int-handler.o
++
++ifdef CONFIG_REMOTE_DEBUG
++obj-y += dbg_io.o
++endif
++
+diff -urN linux-2.6.8.1/arch/mips/brcm-boards/generic/dbg_io.c linux-2.6.8.1-brcm63xx/arch/mips/brcm-boards/generic/dbg_io.c
+--- linux-2.6.8.1/arch/mips/brcm-boards/generic/dbg_io.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.8.1-brcm63xx/arch/mips/brcm-boards/generic/dbg_io.c 2006-06-26 09:07:08.000000000 +0200
+@@ -0,0 +1,260 @@
++/*
++<:copyright-gpl
++ Copyright 2003 Broadcom Corp. All Rights Reserved.
++
++ This program is free software; you can distribute it and/or modify it
++ under the terms of the GNU General Public License (Version 2) as
++ published by the Free Software Foundation.
++
++ This program is distributed in the hope it will be useful, but WITHOUT
++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
++ for more details.
++
++ You should have received a copy of the GNU General Public License along
++ with this program; if not, write to the Free Software Foundation, Inc.,
++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
++:>
++*/
++
++#include <linux/config.h>
++#include <linux/tty.h>
++#include <linux/major.h>
++#include <linux/init.h>
++#include <linux/console.h>
++#include <linux/fs.h>
++#include <linux/interrupt.h>
++#include <linux/kernel.h>
++#include <linux/types.h>
++#include <linux/sched.h>
++
++#include <bcm_map_part.h>
++
++#undef PRNT /* define for debug printing */
++
++#define UART16550_BAUD_2400 2400
++#define UART16550_BAUD_4800 4800
++#define UART16550_BAUD_9600 9600
++#define UART16550_BAUD_19200 19200
++#define UART16550_BAUD_38400 38400
++#define UART16550_BAUD_57600 57600
++#define UART16550_BAUD_115200 115200
++
++#define UART16550_PARITY_NONE 0
++#define UART16550_PARITY_ODD 0x08
++#define UART16550_PARITY_EVEN 0x18
++#define UART16550_PARITY_MARK 0x28
++#define UART16550_PARITY_SPACE 0x38
++
++#define UART16550_DATA_5BIT 0x0
++#define UART16550_DATA_6BIT 0x1
++#define UART16550_DATA_7BIT 0x2
++#define UART16550_DATA_8BIT 0x3
++
++#define UART16550_STOP_1BIT 0x0
++#define UART16550_STOP_2BIT 0x4
++
++volatile Uart * stUart = UART_BASE;
++
++#define WRITE16(addr, value) ((*(volatile UINT16 *)((ULONG)&addr)) = value)
++
++/* Low level UART routines from promcon.c */
++extern void prom_putc(char c);
++extern char prom_getc(void);
++extern int prom_getc_nowait(void);
++extern int prom_testc(void);
++
++extern void set_debug_traps(void);
++extern void breakpoint(void);
++extern void enable_brcm_irq(unsigned int);
++extern void set_async_breakpoint(unsigned int epc);
++
++#ifdef CONFIG_GDB_CONSOLE
++extern void register_gdb_console(void);
++#endif
++
++int gdb_initialized = 0;
++
++#define GDB_BUF_SIZE 512 /* power of 2, please */
++
++static char gdb_buf[GDB_BUF_SIZE] ;
++static int gdb_buf_in_inx ;
++static atomic_t gdb_buf_in_cnt ;
++static int gdb_buf_out_inx ;
++
++void debugInit(uint32 baud, uint8 data, uint8 parity, uint8 stop)
++{
++ /* Do nothing, assume boot loader has already set up serial port */
++ printk("debugInit called\n");
++}
++
++/*
++ * Get a char if available, return -1 if nothing available.
++ * Empty the receive buffer first, then look at the interface hardware.
++ */
++static int read_char(void)
++{
++ if (atomic_read(&gdb_buf_in_cnt) != 0) /* intr routine has q'd chars */
++ {
++ int chr ;
++
++ chr = gdb_buf[gdb_buf_out_inx++] ;
++ gdb_buf_out_inx &= (GDB_BUF_SIZE - 1) ;
++ atomic_dec(&gdb_buf_in_cnt) ;
++ return(chr) ;
++ }
++ return(prom_getc_nowait()) ; /* read from hardware */
++} /* read_char */
++
++/*
++ * This is the receiver interrupt routine for the GDB stub.
++ * It will receive a limited number of characters of input
++ * from the gdb host machine and save them up in a buffer.
++ *
++ * When the gdb stub routine getDebugChar() is called it
++ * draws characters out of the buffer until it is empty and
++ * then reads directly from the serial port.
++ *
++ * We do not attempt to write chars from the interrupt routine
++ * since the stubs do all of that via putDebugChar() which
++ * writes one byte after waiting for the interface to become
++ * ready.
++ *
++ * The debug stubs like to run with interrupts disabled since,
++ * after all, they run as a consequence of a breakpoint in
++ * the kernel.
++ *
++ * Perhaps someone who knows more about the tty driver than I
++ * care to learn can make this work for any low level serial
++ * driver.
++ */
++static void gdb_interrupt(int irq, void *dev_id, struct pt_regs * regs)
++{
++ int chr ;
++ int more;
++ do
++ {
++ chr = prom_getc_nowait() ;
++ more = prom_testc();
++ if (chr < 0) continue ;
++
++ /* If we receive a Ctrl-C then this is GDB trying to break in */
++ if (chr == 3)
++ {
++ /* Replace current instruction with breakpoint */
++ set_async_breakpoint(regs->cp0_epc);
++ //breakpoint();
++ }
++
++#ifdef PRNT
++ printk("gdb_interrupt: chr=%02x '%c', more = %x\n",
++ chr, chr > ' ' && chr < 0x7F ? chr : ' ', more) ;
++#endif
++
++ if (atomic_read(&gdb_buf_in_cnt) >= GDB_BUF_SIZE)
++ { /* buffer overflow, clear it */
++ gdb_buf_in_inx = 0 ;
++ atomic_set(&gdb_buf_in_cnt, 0) ;
++ gdb_buf_out_inx = 0 ;
++ break ;
++ }
++
++ gdb_buf[gdb_buf_in_inx++] = chr ;
++ gdb_buf_in_inx &= (GDB_BUF_SIZE - 1) ;
++ atomic_inc(&gdb_buf_in_cnt) ;
++ }
++ while (more !=0);
++
++} /* gdb_interrupt */
++
++/*
++ * getDebugChar
++ *
++ * This is a GDB stub routine. It waits for a character from the
++ * serial interface and then returns it. If there is no serial
++ * interface connection then it returns a bogus value which will
++ * almost certainly cause the system to hang.
++ */
++int getDebugChar(void)
++{
++ volatile int chr ;
++
++#ifdef PRNT
++ printk("getDebugChar: ") ;
++#endif
++
++ while ( (chr = read_char()) < 0 ) ;
++
++#ifdef PRNT
++ printk("%c\n", chr > ' ' && chr < 0x7F ? chr : ' ') ;
++#endif
++ return(chr) ;
++
++} /* getDebugChar */
++
++/*
++ * putDebugChar
++ *
++ * This is a GDB stub routine. It waits until the interface is ready
++ * to transmit a char and then sends it. If there is no serial
++ * interface connection then it simply returns to its caller, having
++ * pretended to send the char.
++ */
++int putDebugChar(unsigned char chr)
++{
++#ifdef PRNT
++ printk("putDebugChar: chr=%02x '%c'\n", chr,
++ chr > ' ' && chr < 0x7F ? chr : ' ') ;
++#endif
++
++ prom_putc(chr) ; /* this routine will wait */
++ return 1;
++
++} /* putDebugChar */
++
++/* Just a NULL routine for testing. */
++void gdb_null(void)
++{
++}
++
++void rs_kgdb_hook(int tty_no)
++{
++ printk("rs_kgdb_hook: tty %d\n", tty_no);
++
++ /* Call GDB routine to setup the exception vectors for the debugger */
++ set_debug_traps();
++
++ printk("Breaking into debugger...\n");
++ breakpoint();
++ gdb_null() ;
++ printk("Connected.\n");
++
++ gdb_initialized = 1;
++
++#ifdef CONFIG_GDB_CONSOLE
++ register_gdb_console();
++#endif
++}
++
++void kgdb_hook_irq()
++{
++ int retval ;
++ uint16 uMask;
++
++ printk("GDB: Hooking UART interrupt\n");
++
++ retval = request_irq(INTERRUPT_ID_UART,
++ gdb_interrupt,
++ SA_INTERRUPT,
++ "GDB-stub", NULL);
++
++ if (retval != 0)
++ printk("gdb_hook: request_irq(irq=%d) failed: %d\n", INTERRUPT_ID_UART, retval);
++
++ // Enable UART config Rx not empty IRQ
++ uMask = READ16(stUart->intMask) ;
++ // printk("intMask: 0x%x\n", uMask);
++ WRITE16(stUart->intMask, uMask | RXFIFONE);
++}
++
++
+diff -urN linux-2.6.8.1/arch/mips/brcm-boards/generic/int-handler.S linux-2.6.8.1-brcm63xx/arch/mips/brcm-boards/generic/int-handler.S
+--- linux-2.6.8.1/arch/mips/brcm-boards/generic/int-handler.S 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.8.1-brcm63xx/arch/mips/brcm-boards/generic/int-handler.S 2006-06-26 09:07:08.000000000 +0200
+@@ -0,0 +1,59 @@
++/*
++<:copyright-gpl
++ Copyright 2002 Broadcom Corp. All Rights Reserved.
++
++ This program is free software; you can distribute it and/or modify it
++ under the terms of the GNU General Public License (Version 2) as
++ published by the Free Software Foundation.
++
++ This program is distributed in the hope it will be useful, but WITHOUT
++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
++ for more details.
++
++ You should have received a copy of the GNU General Public License along
++ with this program; if not, write to the Free Software Foundation, Inc.,
++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
++:>
++*/
++/*
++ * Generic interrupt handler for Broadcom MIPS boards
++ */
++
++#include <linux/config.h>
++
++#include <asm/asm.h>
++#include <asm/mipsregs.h>
++#include <asm/regdef.h>
++#include <asm/stackframe.h>
++
++/*
++ * MIPS IRQ Source
++ * -------- ------
++ * 0 Software (ignored)
++ * 1 Software (ignored)
++ * 2 Combined hardware interrupt (hw0)
++ * 3 Hardware
++ * 4 Hardware
++ * 5 Hardware
++ * 6 Hardware
++ * 7 R4k timer
++ */
++
++ .text
++ .set noreorder
++ .set noat
++ .align 5
++ NESTED(brcmIRQ, PT_SIZE, sp)
++ SAVE_ALL
++ CLI
++ .set noreorder
++ .set at
++
++ jal brcm_irq_dispatch
++ move a0, sp
++
++ j ret_from_irq
++ nop
++
++ END(brcmIRQ)
+--- linux-2.6.8.1/arch/mips/Kconfig 2004-08-14 12:55:32.000000000 +0200
++++ linux-2.6.8.1-brcm63xx/arch/mips/Kconfig 2006-06-26 09:07:08.000000000 +0200
+@@ -27,6 +27,17 @@
+
+ menu "Machine selection"
+
++# CONFIG_MIPS_BRCM Begin Broadcom changed code.
++
++config MIPS_BRCM
++ bool "Support for the Broadcom boards"
++ help
++ This is a family of boards based on the Broadcom MIPS32
++
++source "arch/mips/brcm-boards/bcm963xx/Kconfig"
++
++# CONFIG_MIPS_BRCM End Broadcom changed code.
++
+ config MACH_JAZZ
+ bool "Support for the Jazz family of machines"
+ select ISA
+@@ -146,6 +157,7 @@
+ depends on MIPS32
+ select DMA_NONCOHERENT
+ select HW_HAS_PCI
++ select SWAP_IO_SPACE
+
+ config MIPS_COBALT
+ bool "Support for Cobalt Server (EXPERIMENTAL)"
+@@ -198,6 +210,7 @@
+ select IRQ_CPU
+ select MIPS_GT96100
+ select RM7000_CPU_SCACHE
++ select SWAP_IO_SPACE
+ help
+ This is an evaluation board based on the Galileo GT-96100 LAN/WAN
+ communications controllers containing a MIPS R5000 compatible core
+@@ -268,6 +281,7 @@
+ bool "Support for MIPS Atlas board"
+ select DMA_NONCOHERENT
+ select HW_HAS_PCI
++ select SWAP_IO_SPACE
+ help
+ This enables support for the QED R5231-based MIPS Atlas evaluation
+ board.
+@@ -277,6 +291,7 @@
+ select HAVE_STD_PC_SERIAL_PORT
+ select DMA_NONCOHERENT
+ select HW_HAS_PCI
++ select SWAP_IO_SPACE
+ help
+ This enables support for the VR5000-based MIPS Malta evaluation
+ board.
+@@ -294,6 +309,7 @@
+ select IRQ_CPU
+ select IRQ_CPU_RM7K
+ select RM7000_CPU_SCACHE
++ select SWAP_IO_SPACE
+ help
+ The Ocelot is a MIPS-based Single Board Computer (SBC) made by
+ Momentum Computer <http://www.momenco.com/>.
+@@ -306,6 +322,7 @@
+ select IRQ_CPU_RM7K
+ select PCI_MARVELL
+ select RM7000_CPU_SCACHE
++ select SWAP_IO_SPACE
+ help
+ The Ocelot is a MIPS-based Single Board Computer (SBC) made by
+ Momentum Computer <http://www.momenco.com/>.
+@@ -318,6 +335,7 @@
+ select IRQ_MV64340
+ select PCI_MARVELL
+ select RM7000_CPU_SCACHE
++ select SWAP_IO_SPACE
+ help
+ The Ocelot is a MIPS-based Single Board Computer (SBC) made by
+ Momentum Computer <http://www.momenco.com/>.
+@@ -332,6 +350,7 @@
+ select LIMITED_DMA
+ select PCI_MARVELL
+ select RM7000_CPU_SCACHE
++ select SWAP_IO_SPACE
+ help
+ The Jaguar ATX is a MIPS-based Single Board Computer (SBC) made by
+ Momentum Computer <http://www.momenco.com/>.
+@@ -349,6 +368,7 @@
+ select HW_HAS_PCI
+ select IRQ_CPU
+ select IRQ_CPU_RM7K
++ select SWAP_IO_SPACE
+ help
+ Yosemite is an evaluation board for the RM9000x2 processor
+ manufactured by PMC-Sierra
+@@ -411,6 +431,7 @@
+ select DMA_NONCOHERENT
+ select IP22_CPU_SCACHE
+ select IRQ_CPU
++ select SWAP_IO_SPACE
+ help
+ This are the SGI Indy, Challenge S and Indigo2, as well as certain
+ OEM variants like the Tandem CMN B006S. To compile a Linux kernel
+@@ -529,12 +550,14 @@
+ depends on SOC_AU1000
+ select DMA_NONCOHERENT
+ select HW_HAS_PCI
++ select SWAP_IO_SPACE
+
+ config MIPS_PB1100
+ bool "PB1100 board"
+ depends on SOC_AU1100
+ select DMA_NONCOHERENT
+ select HW_HAS_PCI
++ select SWAP_IO_SPACE
+
+ config MIPS_PB1500
+ bool "PB1500 board"
+@@ -596,6 +619,7 @@
+ bool "Support for Broadcom BCM1xxx SOCs (EXPERIMENTAL)"
+ depends on EXPERIMENTAL
+ select DMA_COHERENT
++ select SWAP_IO_SPACE
+
+ choice
+ prompt "BCM1xxx SOC-based board"
+@@ -818,6 +842,7 @@
+ select DMA_NONCOHERENT
+ select HW_HAS_PCI
+ select ISA
++ select SWAP_IO_SPACE
+
+ config RWSEM_GENERIC_SPINLOCK
+ bool
+@@ -934,8 +959,6 @@
+
+ config SWAP_IO_SPACE
+ bool
+- depends on TOSHIBA_JMR3927 || TOSHIBA_RBTX4927 || SIBYTE_SB1xxx_SOC || SGI_IP22 || MOMENCO_OCELOT_C || MOMENCO_OCELOT_G || MOMENCO_OCELOT || MOMENCO_JAGUAR_ATX || MIPS_MALTA || MIPS_ATLAS || MIPS_EV96100 || MIPS_PB1100 || MIPS_PB1000
+- default y
+
+ #
+ # Unfortunately not all GT64120 systems run the chip at the same clock.
+--- linux-2.6.8.1/arch/mips/kernel/cpu-probe.c 2004-08-14 12:55:10.000000000 +0200
++++ linux-2.6.8.1-brcm63xx/arch/mips/kernel/cpu-probe.c 2006-06-26 09:07:09.000000000 +0200
+@@ -538,6 +538,27 @@
+ }
+ }
+
++#if defined(CONFIG_MIPS_BRCM)
++static inline void cpu_probe_broadcom(struct cpuinfo_mips *c)
++{
++ decode_config1(c);
++ switch (c->processor_id & 0xff00) {
++ case PRID_IMP_BCM6338:
++ c->cputype = CPU_BCM6338;
++ break;
++ case PRID_IMP_BCM6345:
++ c->cputype = CPU_BCM6345;
++ break;
++ case PRID_IMP_BCM6348:
++ c->cputype = CPU_BCM6348;
++ break;
++ default:
++ c->cputype = CPU_UNKNOWN;
++ break;
++ }
++}
++#endif
++
+ static inline void cpu_probe_sandcraft(struct cpuinfo_mips *c)
+ {
+ decode_config1(c);
+@@ -576,6 +597,11 @@
+ case PRID_COMP_SIBYTE:
+ cpu_probe_sibyte(c);
+ break;
++#if defined(CONFIG_MIPS_BRCM)
++ case PRID_COMP_BROADCOM:
++ cpu_probe_broadcom(c);
++ break;
++#endif
+
+ case PRID_COMP_SANDCRAFT:
+ cpu_probe_sandcraft(c);
+--- linux-2.6.8.1/arch/mips/kernel/gdb-stub.c 2004-08-14 12:56:23.000000000 +0200
++++ linux-2.6.8.1-brcm63xx/arch/mips/kernel/gdb-stub.c 2006-06-26 09:07:09.000000000 +0200
+@@ -171,6 +171,8 @@
+ static unsigned char *mem2hex(char *mem, char *buf, int count, int may_fault);
+ void handle_exception(struct gdb_regs *regs);
+
++int kgdb_enabled;
++
+ /*
+ * spin locks for smp case
+ */
+--- linux-2.6.8.1/arch/mips/kernel/irq.c 2004-08-14 12:54:50.000000000 +0200
++++ linux-2.6.8.1-brcm63xx/arch/mips/kernel/irq.c 2006-06-26 09:07:09.000000000 +0200
+@@ -30,12 +30,7 @@
+ /*
+ * Controller mappings for all interrupt sources:
+ */
+-irq_desc_t irq_desc[NR_IRQS] __cacheline_aligned = {
+- [0 ... NR_IRQS-1] = {
+- .handler = &no_irq_type,
+- .lock = SPIN_LOCK_UNLOCKED
+- }
+-};
++irq_desc_t irq_desc[NR_IRQS] __cacheline_aligned;
+
+ static void register_irq_proc (unsigned int irq);
+
+@@ -809,7 +804,20 @@
+ return 0;
+ }
+
+-void __init init_generic_irq(void)
++#ifdef CONFIG_KGDB
++extern void breakpoint(void);
++extern void set_debug_traps(void);
++
++static int kgdb_flag = 1;
++static int __init nokgdb(char *str)
++{
++ kgdb_flag = 0;
++ return 1;
++}
++__setup("nokgdb", nokgdb);
++#endif
++
++void __init init_IRQ(void)
+ {
+ int i;
+
+@@ -818,7 +826,18 @@
+ irq_desc[i].action = NULL;
+ irq_desc[i].depth = 1;
+ irq_desc[i].handler = &no_irq_type;
++ irq_desc[i].lock = SPIN_LOCK_UNLOCKED;
++ }
++
++ arch_init_irq();
++
++#ifdef CONFIG_KGDB
++ if (kgdb_flag) {
++ printk("Wait for gdb client connection ...\n");
++ set_debug_traps();
++ breakpoint();
+ }
++#endif
+ }
+
+ EXPORT_SYMBOL(disable_irq_nosync);
+@@ -833,7 +852,7 @@
+
+ static struct proc_dir_entry * smp_affinity_entry [NR_IRQS];
+
+-static cpumask_t irq_affinity [NR_IRQS] = { [0 ... NR_IRQS-1] = ~0UL };
++static cpumask_t irq_affinity [NR_IRQS] = { [0 ... NR_IRQS-1] = CPU_MASK_ALL };
+ static int irq_affinity_read_proc (char *page, char **start, off_t off,
+ int count, int *eof, void *data)
+ {
+--- linux-2.6.8.1/arch/mips/kernel/Makefile 2004-08-14 12:55:19.000000000 +0200
++++ linux-2.6.8.1-brcm63xx/arch/mips/kernel/Makefile 2006-06-26 09:07:09.000000000 +0200
+@@ -8,6 +8,13 @@
+ ptrace.o reset.o semaphore.o setup.o signal.o syscall.o \
+ time.o traps.o unaligned.o
+
++# CONFIG_MIPS_BRCM Begin Broadcom added code.
++# gcc 3.4.x reorders code with -Os and -O2, breaking the save_static stuff.
++CFLAGS_syscall.o := -O1
++CFLAGS_signal.o := -O1
++CFLAGS_signal32.o := -O1
++# CONFIG_MIPS_BRCM End Broadcom added code.
++
+ ifdef CONFIG_MODULES
+ obj-y += mips_ksyms.o module.o
+ obj-$(CONFIG_MIPS32) += module-elf32.o
+--- linux-2.6.8.1/arch/mips/kernel/proc.c 2004-08-14 12:55:09.000000000 +0200
++++ linux-2.6.8.1-brcm63xx/arch/mips/kernel/proc.c 2006-06-26 09:07:09.000000000 +0200
+@@ -75,6 +75,11 @@
+ [CPU_VR4133] "NEC VR4133",
+ [CPU_VR4181] "NEC VR4181",
+ [CPU_VR4181A] "NEC VR4181A",
++#if defined(CONFIG_MIPS_BRCM)
++ [CPU_BCM6338] "BCM6338",
++ [CPU_BCM6345] "BCM6345",
++ [CPU_BCM6348] "BCM6348",
++#endif
+ [CPU_SR71000] "Sandcraft SR71000"
+ };
+
+--- linux-2.6.8.1/arch/mips/kernel/scall32-o32.S 2004-08-14 12:54:49.000000000 +0200
++++ linux-2.6.8.1-brcm63xx/arch/mips/kernel/scall32-o32.S 2006-06-26 12:42:05.000000000 +0200
+@@ -640,9 +640,9 @@
+ syscalltable
+ .size sys_call_table, . - sys_call_table
+
+- .macro sys function, nargs
++ /*.macro sys function, nargs
+ .byte \nargs
+- .endm
++ .endm*/
+
+ sys_narg_table:
+ syscalltable
+--- linux-2.6.8.1/arch/mips/kernel/time.c 2004-08-14 12:55:20.000000000 +0200
++++ linux-2.6.8.1-brcm63xx/arch/mips/kernel/time.c 2006-06-26 09:07:09.000000000 +0200
+@@ -274,11 +274,15 @@
+
+ /* .. relative to previous jiffy (32 bits is enough) */
+ count -= timerlo;
+-
++
+ __asm__("multu %1,%2"
+ : "=h" (res)
+ : "r" (count), "r" (sll32_usecs_per_cycle)
++#if defined(CONFIG_MIPS_BRCM)
++ : "lo");
++#else
+ : "lo", "accum");
++#endif
+
+ /*
+ * Due to possible jiffies inconsistencies, we need to check
+@@ -333,7 +337,11 @@
+ __asm__("multu %1,%2"
+ : "=h" (res)
+ : "r" (count), "r" (quotient)
++#if defined(CONFIG_MIPS_BRCM)
++ : "lo");
++#else
+ : "lo", "accum");
++#endif
+
+ /*
+ * Due to possible jiffies inconsistencies, we need to check
+@@ -375,7 +383,11 @@
+ : "r" (timerhi), "m" (timerlo),
+ "r" (tmp), "r" (USECS_PER_JIFFY),
+ "r" (USECS_PER_JIFFY_FRAC)
++#if defined(CONFIG_MIPS_BRCM)
++ : "hi", "lo");
++#else
+ : "hi", "lo", "accum");
++#endif
+ cached_quotient = quotient;
+ }
+ }
+@@ -389,7 +401,11 @@
+ __asm__("multu %1,%2"
+ : "=h" (res)
+ : "r" (count), "r" (quotient)
++#if defined(CONFIG_MIPS_BRCM)
++ : "lo");
++#else
+ : "lo", "accum");
++#endif
+
+ /*
+ * Due to possible jiffies inconsistencies, we need to check
+@@ -738,6 +754,7 @@
+ board_timer_setup(&timer_irqaction);
+ }
+
++
+ #define FEBRUARY 2
+ #define STARTOFTIME 1970
+ #define SECDAY 86400L
+--- linux-2.6.8.1/arch/mips/kernel/traps.c 2004-08-14 12:55:20.000000000 +0200
++++ linux-2.6.8.1-brcm63xx/arch/mips/kernel/traps.c 2006-06-26 09:07:09.000000000 +0200
+@@ -246,6 +246,13 @@
+
+ static spinlock_t die_lock = SPIN_LOCK_UNLOCKED;
+
++#if defined(CONFIG_MIPS_BRCM)
++#ifdef CONFIG_REMOTE_DEBUG
++#include <asm/gdb-stub.h>
++extern void handle_exception(struct gdb_regs *regs);
++#endif
++#endif
++
+ NORET_TYPE void __die(const char * str, struct pt_regs * regs,
+ const char * file, const char * func, unsigned long line)
+ {
+@@ -258,7 +265,33 @@
+ printk(" in %s:%s, line %ld", file, func, line);
+ printk("[#%d]:\n", ++die_counter);
+ show_registers(regs);
++#if defined(CONFIG_MIPS_BRCM)
++#ifdef CONFIG_REMOTE_DEBUG
++ {
++ struct gdb_regs regs2;
++ int i;
++ long *ptr;
++
++ ptr = ®s2.reg0;
++ /* Copy registers to GDB structure */
++ for(i=0; i<32;i++)
++ *ptr++ = regs->regs[i];
++
++ regs2.lo = regs->lo;
++ regs2.hi = regs->hi;
++ regs2.cp0_epc = regs->cp0_epc;
++ regs2.cp0_badvaddr = regs->cp0_badvaddr;
++ regs2.cp0_status = regs->cp0_status;
++ regs2.cp0_cause = regs->cp0_cause;
++
++ handle_exception(®s2); /* Break to GDB */
++ }
++#endif
++#endif
+ spin_unlock_irq(&die_lock);
++ /* Ron add for kernel crash */
++ (*(volatile unsigned int *)(0xfffe040c)) &= ~(1<<5);
++ machine_restart(NULL);
+ do_exit(SIGSEGV);
+ }
+
+--- linux-2.6.8.1/arch/mips/Makefile 2004-08-14 12:54:47.000000000 +0200
++++ linux-2.6.8.1-brcm63xx/arch/mips/Makefile 2006-06-26 09:07:09.000000000 +0200
+@@ -41,8 +41,14 @@
+ endif
+
+ ifdef CONFIG_CROSSCOMPILE
++# CONFIG_MIPS_BRCM Begin Broadcom added code.
++ifdef CONFIG_MIPS_BRCM
++CROSS_COMPILE := mips-linux-uclibc-#$(tool-prefix)
++else
+ CROSS_COMPILE := $(tool-prefix)
+ endif
++# CONFIG_MIPS_BRCM End Broadcom added code.
++endif
+
+ #
+ # GCC uses -G 0 -mabicalls -fpic as default. We don't want PIC in the kernel
+@@ -57,6 +63,9 @@
+ cflags-y := -I $(TOPDIR)/include/asm/gcc
+ cflags-y += -G 0 -mno-abicalls -fno-pic -pipe
+ cflags-y += $(call check_gcc, -finline-limit=100000,)
++ifeq ($(strip $(JTAG_KERNEL_DEBUG)),y)
++cflags-y += -g
++endif
+ LDFLAGS_vmlinux += -G 0 -static -n
+ MODFLAGS += -mlong-calls
+
+@@ -64,6 +73,12 @@
+
+ check_warning = $(shell if $(CC) $(1) -c -o /dev/null -xc /dev/null > /dev/null 2>&1; then echo "$(1)"; else echo "$(2)"; fi)
+
++# CONFIG_MIPS_BRCM Begin Broadcom changed code.
++ifdef CONFIG_MIPS_BRCM
++cflags-$(CONFIG_REMOTE_DEBUG) += -ggdb
++endif
++# CONFIG_MIPS_BRCM End Broadcom changed code.
++
+ #
+ # Use: $(call set_gccflags,<cpu0>,<isa0>,<cpu1>,<isa1>,<isa2>)
+ #
+@@ -302,6 +317,20 @@
+ libs-$(CONFIG_BAGET_MIPS) += arch/mips/baget/ arch/mips/baget/prom/
+ load-$(CONFIG_BAGET_MIPS) += 0x80001000
+
++# CONFIG_MIPS_BRCM Begin Broadcom added code.
++ifdef CONFIG_MIPS_BRCM
++#
++# Broadcom board
++core-$(CONFIG_BCM96338) += arch/mips/brcm-boards/generic/ arch/mips/brcm-boards/bcm963xx/
++cflags-$(CONFIG_BCM96338) += -Iinclude/asm-mips/mach-bcm963xx
++core-$(CONFIG_BCM96345) += arch/mips/brcm-boards/generic/ arch/mips/brcm-boards/bcm963xx/
++cflags-$(CONFIG_BCM96345) += -Iinclude/asm-mips/mach-bcm963xx
++core-$(CONFIG_BCM96348) += arch/mips/brcm-boards/generic/ arch/mips/brcm-boards/bcm963xx/
++cflags-$(CONFIG_BCM96348) += -Iinclude/asm-mips/mach-bcm963xx
++load-$(CONFIG_MIPS_BRCM) += 0x80010000
++endif
++# CONFIG_MIPS_BRCM End Broadcom added code.
++
+ #
+ # Cobalt Server
+ #
+--- linux-2.6.8.1/arch/mips/mm/c-r4k.c 2004-08-14 12:56:22.000000000 +0200
++++ linux-2.6.8.1-brcm63xx/arch/mips/mm/c-r4k.c 2006-06-26 09:07:09.000000000 +0200
+@@ -86,7 +86,7 @@
+
+ static void (* r4k_blast_dcache)(void);
+
+-static void r4k_blast_dcache_setup(void)
++static inline void r4k_blast_dcache_setup(void)
+ {
+ unsigned long dc_lsize = cpu_dcache_line_size();
+
+@@ -385,6 +385,7 @@
+ static void r4k_flush_icache_range(unsigned long start, unsigned long end)
+ {
+ unsigned long dc_lsize = current_cpu_data.dcache.linesz;
++ unsigned long ic_lsize = current_cpu_data.icache.linesz;
+ unsigned long addr, aend;
+
+ if (!cpu_has_ic_fills_f_dc) {
+@@ -407,14 +408,14 @@
+ if (end - start > icache_size)
+ r4k_blast_icache();
+ else {
+- addr = start & ~(dc_lsize - 1);
+- aend = (end - 1) & ~(dc_lsize - 1);
++ addr = start & ~(ic_lsize - 1);
++ aend = (end - 1) & ~(ic_lsize - 1);
+ while (1) {
+ /* Hit_Invalidate_I */
+ protected_flush_icache_line(addr);
+ if (addr == aend)
+ break;
+- addr += dc_lsize;
++ addr += ic_lsize;
+ }
+ }
+ }
+@@ -802,6 +803,13 @@
+ if (!(config & MIPS_CONF_M))
+ panic("Don't know how to probe P-caches on this cpu.");
+
++#if defined(CONFIG_MIPS_BRCM)
++ if (c->cputype == CPU_BCM6338 || c->cputype == CPU_BCM6345 || c->cputype == CPU_BCM6348){
++ printk("brcm mips: enabling icache and dcache...\n");
++ /* Enable caches */
++ write_c0_diag(read_c0_diag() | 0xC0000000);
++ }
++#endif
+ /*
+ * So we seem to be a MIPS32 or MIPS64 CPU
+ * So let's probe the I-cache ...
+--- linux-2.6.8.1/arch/mips/pci/fixup-bcm96348.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.8.1-brcm63xx/arch/mips/pci/fixup-bcm96348.c 2006-06-26 09:07:09.000000000 +0200
+@@ -0,0 +1,85 @@
++/*
++<:copyright-gpl
++ Copyright 2002 Broadcom Corp. All Rights Reserved.
++
++ This program is free software; you can distribute it and/or modify it
++ under the terms of the GNU General Public License (Version 2) as
++ published by the Free Software Foundation.
++
++ This program is distributed in the hope it will be useful, but WITHOUT
++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
++ for more details.
++
++ You should have received a copy of the GNU General Public License along
++ with this program; if not, write to the Free Software Foundation, Inc.,
++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
++:>
++*/
++#include <linux/init.h>
++#include <linux/types.h>
++#include <linux/pci.h>
++
++#include <bcmpci.h>
++#include <bcm_intr.h>
++#include <bcm_map_part.h>
++
++static volatile MpiRegisters * mpi = (MpiRegisters *)(MPI_BASE);
++
++static char irq_tab_bcm96348[] __initdata = {
++ [0] = INTERRUPT_ID_MPI,
++ [1] = INTERRUPT_ID_MPI,
++#if defined(CONFIG_USB)
++ [USB_HOST_SLOT] = INTERRUPT_ID_USBH
++#endif
++};
++
++int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
++{
++ return irq_tab_bcm96348[slot];
++}
++
++static void bcm96348_fixup(struct pci_dev *dev)
++{
++ uint32 memaddr;
++ uint32 size;
++
++ memaddr = pci_resource_start(dev, 0);
++ size = pci_resource_len(dev, 0);
++
++ switch (PCI_SLOT(dev->devfn)) {
++ case 0:
++ // UBUS to PCI address range
++ // Memory Window 1. Mask determines which bits are decoded.
++ mpi->l2pmrange1 = ~(size-1);
++ // UBUS to PCI Memory base address. This is akin to the ChipSelect base
++ // register.
++ mpi->l2pmbase1 = memaddr & BCM_PCI_ADDR_MASK;
++ // UBUS to PCI Remap Address. Replaces the masked address bits in the
++ // range register with this setting.
++ // Also, enable direct I/O and direct Memory accesses
++ mpi->l2pmremap1 = (memaddr | MEM_WINDOW_EN);
++ break;
++
++ case 1:
++ // Memory Window 2
++ mpi->l2pmrange2 = ~(size-1);
++ // UBUS to PCI Memory base address.
++ mpi->l2pmbase2 = memaddr & BCM_PCI_ADDR_MASK;
++ // UBUS to PCI Remap Address
++ mpi->l2pmremap2 = (memaddr | MEM_WINDOW_EN);
++ break;
++
++#if defined(CONFIG_USB)
++ case USB_HOST_SLOT:
++ dev->resource[0].start = USB_HOST_BASE;
++ dev->resource[0].end = USB_HOST_BASE+USB_BAR0_MEM_SIZE-1;
++ break;
++#endif
++ }
++}
++
++struct pci_fixup pcibios_fixups[] = {
++ { PCI_FIXUP_FINAL, PCI_ANY_ID, PCI_ANY_ID, bcm96348_fixup },
++ {0}
++};
+--- linux-2.6.8.1/arch/mips/pci/ops-bcm96348.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.8.1-brcm63xx/arch/mips/pci/ops-bcm96348.c 2006-06-26 09:07:09.000000000 +0200
+@@ -0,0 +1,276 @@
++/*
++<:copyright-gpl
++ Copyright 2002 Broadcom Corp. All Rights Reserved.
++
++ This program is free software; you can distribute it and/or modify it
++ under the terms of the GNU General Public License (Version 2) as
++ published by the Free Software Foundation.
++
++ This program is distributed in the hope it will be useful, but WITHOUT
++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
++ for more details.
++
++ You should have received a copy of the GNU General Public License along
++ with this program; if not, write to the Free Software Foundation, Inc.,
++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
++:>
++*/
++#include <linux/types.h>
++#include <linux/pci.h>
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <asm/addrspace.h>
++
++#include <bcm_intr.h>
++#include <bcm_map_part.h>
++#include <bcmpci.h>
++
++#include <linux/delay.h>
++
++#if defined(CONFIG_USB)
++#if 0
++#define DPRINT(x...) printk(x)
++#else
++#define DPRINT(x...)
++#endif
++
++static int
++pci63xx_int_read(unsigned int devfn, int where, u32 * value, int size);
++static int
++pci63xx_int_write(unsigned int devfn, int where, u32 * value, int size);
++
++static bool usb_mem_size_rd = FALSE;
++static uint32 usb_mem_base = 0;
++static uint32 usb_cfg_space_cmd_reg = 0;
++#endif
++static bool pci_mem_size_rd = FALSE;
++
++static volatile MpiRegisters * mpi = (MpiRegisters *)(MPI_BASE);
++
++static void mpi_SetupPciConfigAccess(uint32 addr)
++{
++ mpi->l2pcfgctl = (DIR_CFG_SEL | DIR_CFG_USEREG | addr) & ~CONFIG_TYPE;
++}
++
++static void mpi_ClearPciConfigAccess(void)
++{
++ mpi->l2pcfgctl = 0x00000000;
++}
++
++#if defined(CONFIG_USB)
++/* --------------------------------------------------------------------------
++ Name: pci63xx_int_write
++Abstract: PCI Config write on internal device(s)
++ -------------------------------------------------------------------------- */
++static int
++pci63xx_int_write(unsigned int devfn, int where, u32 * value, int size)
++{
++ if (PCI_SLOT(devfn) != USB_HOST_SLOT) {
++ return PCIBIOS_SUCCESSFUL;
++ }
++
++ switch (size) {
++ case 1:
++ DPRINT("W => Slot: %d Where: %2X Len: %d Data: %02X\n",
++ PCI_SLOT(devfn), where, size, *value);
++ break;
++ case 2:
++ DPRINT("W => Slot: %d Where: %2X Len: %d Data: %04X\n",
++ PCI_SLOT(devfn), where, size, *value);
++ switch (where) {
++ case PCI_COMMAND:
++ usb_cfg_space_cmd_reg = *value;
++ break;
++ default:
++ break;
++ }
++ break;
++ case 4:
++ DPRINT("W => Slot: %d Where: %2X Len: %d Data: %08lX\n",
++ PCI_SLOT(devfn), where, size, *value);
++ switch (where) {
++ case PCI_BASE_ADDRESS_0:
++ if (*value == 0xffffffff) {
++ usb_mem_size_rd = TRUE;
++ } else {
++ usb_mem_base = *value;
++ }
++ break;
++ default:
++ break;
++ }
++ break;
++ default:
++ break;
++ }
++
++ return PCIBIOS_SUCCESSFUL;
++}
++
++/* --------------------------------------------------------------------------
++ Name: pci63xx_int_read
++Abstract: PCI Config read on internal device(s)
++ -------------------------------------------------------------------------- */
++static int
++pci63xx_int_read(unsigned int devfn, int where, u32 * value, int size)
++{
++ uint32 retValue = 0xFFFFFFFF;
++
++ if (PCI_SLOT(devfn) != USB_HOST_SLOT) {
++ return PCIBIOS_SUCCESSFUL;
++ }
++
++ // For now, this is specific to the USB Host controller. We can
++ // make it more general if we have to...
++ // Emulate PCI Config accesses
++ switch (where) {
++ case PCI_VENDOR_ID:
++ case PCI_DEVICE_ID:
++ retValue = PCI_VENDOR_ID_BROADCOM | 0x63000000;
++ break;
++ case PCI_COMMAND:
++ case PCI_STATUS:
++ retValue = (0x0006 << 16) | usb_cfg_space_cmd_reg;
++ break;
++ case PCI_CLASS_REVISION:
++ case PCI_CLASS_DEVICE:
++ retValue = (PCI_CLASS_SERIAL_USB << 16) | (0x10 << 8) | 0x01;
++ break;
++ case PCI_BASE_ADDRESS_0:
++ if (usb_mem_size_rd) {
++ retValue = USB_BAR0_MEM_SIZE;
++ } else {
++ if (usb_mem_base != 0)
++ retValue = usb_mem_base;
++ else
++ retValue = USB_HOST_BASE;
++ }
++ usb_mem_size_rd = FALSE;
++ break;
++ case PCI_CACHE_LINE_SIZE:
++ case PCI_LATENCY_TIMER:
++ retValue = 0;
++ break;
++ case PCI_HEADER_TYPE:
++ retValue = PCI_HEADER_TYPE_NORMAL;
++ break;
++ case PCI_SUBSYSTEM_VENDOR_ID:
++ retValue = PCI_VENDOR_ID_BROADCOM;
++ break;
++ case PCI_SUBSYSTEM_ID:
++ retValue = 0x6300;
++ break;
++ case PCI_INTERRUPT_LINE:
++ retValue = INTERRUPT_ID_USBH;
++ break;
++ default:
++ break;
++ }
++
++ switch (size) {
++ case 1:
++ *value = (retValue >> ((where & 3) << 3)) & 0xff;
++ DPRINT("R <= Slot: %d Where: %2X Len: %d Data: %02X\n",
++ PCI_SLOT(devfn), where, size, *value);
++ break;
++ case 2:
++ *value = (retValue >> ((where & 3) << 3)) & 0xffff;
++ DPRINT("R <= Slot: %d Where: %2X Len: %d Data: %04X\n",
++ PCI_SLOT(devfn), where, size, *value);
++ break;
++ case 4:
++ *value = retValue;
++ DPRINT("R <= Slot: %d Where: %2X Len: %d Data: %08lX\n",
++ PCI_SLOT(devfn), where, size, *value);
++ break;
++ default:
++ break;
++ }
++
++ return PCIBIOS_SUCCESSFUL;
++}
++#endif
++
++static int bcm96348_pcibios_read(struct pci_bus *bus, unsigned int devfn,
++ int where, int size, u32 * val)
++{
++ volatile unsigned char *ioBase = (unsigned char *)(mpi->l2piobase | KSEG1);
++ uint32 data;
++
++#if defined(CONFIG_USB)
++ if (PCI_SLOT(devfn) == USB_HOST_SLOT)
++ return pci63xx_int_read(devfn, where, val, size);
++#endif
++
++ mpi_SetupPciConfigAccess(BCM_PCI_CFG(PCI_SLOT(devfn), PCI_FUNC(devfn), where));
++ data = *(uint32 *)ioBase;
++ switch(size) {
++ case 1:
++ *val = (data >> ((where & 3) << 3)) & 0xff;
++ break;
++ case 2:
++ *val = (data >> ((where & 3) << 3)) & 0xffff;
++ break;
++ case 4:
++ *val = data;
++ /* Special case for reading PCI device range */
++ if ((where >= PCI_BASE_ADDRESS_0) && (where <= PCI_BASE_ADDRESS_5)) {
++ if (pci_mem_size_rd) {
++ /* bcm6348 PCI memory window minimum size is 64K */
++ *val &= PCI_SIZE_64K;
++ }
++ }
++ break;
++ default:
++ break;
++ }
++ pci_mem_size_rd = FALSE;
++ mpi_ClearPciConfigAccess();
++
++ return PCIBIOS_SUCCESSFUL;
++}
++
++static int bcm96348_pcibios_write(struct pci_bus *bus, unsigned int devfn,
++ int where, int size, u32 val)
++{
++ volatile unsigned char *ioBase = (unsigned char *)(mpi->l2piobase | KSEG1);
++ uint32 data;
++
++#if defined(CONFIG_USB)
++ if (PCI_SLOT(devfn) == USB_HOST_SLOT)
++ return pci63xx_int_write(devfn, where, &val, size);
++#endif
++ mpi_SetupPciConfigAccess(BCM_PCI_CFG(PCI_SLOT(devfn), PCI_FUNC(devfn), where));
++ data = *(uint32 *)ioBase;
++ switch(size) {
++ case 1:
++ data = (data & ~(0xff << ((where & 3) << 3))) |
++ (val << ((where & 3) << 3));
++ break;
++ case 2:
++ data = (data & ~(0xffff << ((where & 3) << 3))) |
++ (val << ((where & 3) << 3));
++ break;
++ case 4:
++ data = val;
++ /* Special case for reading PCI device range */
++ if ((where >= PCI_BASE_ADDRESS_0) && (where <= PCI_BASE_ADDRESS_5)) {
++ if (val == 0xffffffff)
++ pci_mem_size_rd = TRUE;
++ }
++ break;
++ default:
++ break;
++ }
++ *(uint32 *)ioBase = data;
++ udelay(500);
++ mpi_ClearPciConfigAccess();
++
++ return PCIBIOS_SUCCESSFUL;
++}
++
++struct pci_ops bcm96348_pci_ops = {
++ .read = bcm96348_pcibios_read,
++ .write = bcm96348_pcibios_write
++};
+--- linux-2.6.8.1/arch/mips/pci/Makefile 2004-08-14 12:54:47.000000000 +0200
++++ linux-2.6.8.1-brcm63xx/arch/mips/pci/Makefile 2006-06-26 09:07:09.000000000 +0200
+@@ -17,6 +17,8 @@
+ obj-$(CONFIG_MIPS_NILE4) += ops-nile4.o
+ obj-$(CONFIG_MIPS_TX3927) += ops-jmr3927.o
+ obj-$(CONFIG_PCI_VR41XX) += ops-vr41xx.o pci-vr41xx.o
++obj-$(CONFIG_PCI_VR41XX) += ops-vr41xx.o pci-vr41xx.o
++obj-$(CONFIG_BCM_PCI) += fixup-bcm96348.o pci-bcm96348.o ops-bcm96348.o
+
+ #
+ # These are still pretty much in the old state, watch, go blind.
+@@ -51,3 +53,7 @@
+ obj-$(CONFIG_TOSHIBA_RBTX4927) += fixup-rbtx4927.o ops-tx4927.o
+ obj-$(CONFIG_VICTOR_MPC30X) += fixup-mpc30x.o
+ obj-$(CONFIG_ZAO_CAPCELLA) += fixup-capcella.o
++
++ifeq "$(CONFIG_BCM_PCI)" "y"
++EXTRA_CFLAGS += -I$(INC_BRCMDRIVER_PUB_PATH)/$(BRCM_BOARD)
++endif
+--- linux-2.6.8.1/arch/mips/pci/pci-bcm96348.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.8.1-brcm63xx/arch/mips/pci/pci-bcm96348.c 2006-06-26 09:07:09.000000000 +0200
+@@ -0,0 +1,54 @@
++/*
++<:copyright-gpl
++ Copyright 2002 Broadcom Corp. All Rights Reserved.
++
++ This program is free software; you can distribute it and/or modify it
++ under the terms of the GNU General Public License (Version 2) as
++ published by the Free Software Foundation.
++
++ This program is distributed in the hope it will be useful, but WITHOUT
++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
++ for more details.
++
++ You should have received a copy of the GNU General Public License along
++ with this program; if not, write to the Free Software Foundation, Inc.,
++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
++:>
++*/
++#include <linux/types.h>
++#include <linux/pci.h>
++#include <linux/kernel.h>
++#include <linux/init.h>
++
++#include <asm/pci_channel.h>
++#include <bcmpci.h>
++
++static struct resource bcm_pci_io_resource = {
++ .name = "bcm96348 pci IO space",
++ .start = BCM_PCI_IO_BASE,
++ .end = BCM_PCI_IO_BASE + BCM_PCI_IO_SIZE_64KB - 1,
++ .flags = IORESOURCE_IO
++};
++
++static struct resource bcm_pci_mem_resource = {
++ .name = "bcm96348 pci memory space",
++ .start = BCM_PCI_MEM_BASE,
++ .end = BCM_PCI_MEM_BASE + BCM_PCI_MEM_SIZE_16MB - 1,
++ .flags = IORESOURCE_MEM
++};
++
++extern struct pci_ops bcm96348_pci_ops;
++
++struct pci_controller bcm96348_controller = {
++ .pci_ops = &bcm96348_pci_ops,
++ .io_resource = &bcm_pci_io_resource,
++ .mem_resource = &bcm_pci_mem_resource,
++};
++
++static void bcm96348_pci_init(void)
++{
++ register_pci_controller(&bcm96348_controller);
++}
++
++arch_initcall(bcm96348_pci_init);
+--- linux-2.6.8.1/drivers/mtd/maps/bcm963xx.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.8.1-brcm63xx/drivers/mtd/maps/bcm963xx.c 2006-06-26 09:07:13.000000000 +0200
+@@ -0,0 +1,162 @@
++/*
++ * A simple flash mapping code for BCM963xx board flash memory
++ * It is simple because it only treats all the flash memory as ROM
++ * It is used with chips/map_rom.c
++ *
++ * Song Wang (songw@broadcom.com)
++ */
++#include <linux/module.h>
++#include <linux/types.h>
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <asm/io.h>
++#include <linux/mtd/mtd.h>
++#include <linux/mtd/map.h>
++#include <linux/config.h>
++#include <linux/mtd/partitions.h>
++
++#include <board.h>
++#include <bcmTag.h>
++#define VERSION "1.0"
++
++
++extern PFILE_TAG kerSysImageTagGet(void);
++
++static struct mtd_info *mymtd;
++static struct mtd_partition brcm_partition_info[4];
++
++#define CFE_ADDR 0xbfc00000
++#define CFE_SIZE 64 << 10
++#define FLASH_2M_SIZE 2048 << 10
++#define FLASH_4M_SIZE 4096 << 10
++#define NVRAM_SIZE 64 << 10
++#define TAG_SIZE 0x100
++#define FS_KERNEL_SIZE_4M 0x3E0000
++#define NVRAM_ADDR_4M 0x3F0000
++
++static map_word brcm_physmap_read16(struct map_info *map, unsigned long ofs)
++{
++ map_word val;
++
++ val.x[0] = __raw_readw(map->map_priv_1 + ofs);
++
++ return val;
++}
++
++void brcm_physmap_copy_from(struct map_info *map, void *to, unsigned long from, ssize_t len)
++{
++ memcpy_fromio(to, map->map_priv_1 + from, len);
++}
++
++static void brcm_physmap_write16(struct map_info *map, __u16 d, unsigned long adr)
++{
++ __raw_writew(d, map->map_priv_1 + adr);
++ mb();
++}
++
++void brcm_physmap_copy_to(struct map_info *map, unsigned long to, const void *from, ssize_t len)
++{
++ memcpy_toio(map->map_priv_1 + to, from, len);
++}
++
++struct map_info brcm_physmap_map = {
++ .name = "Physically mapped flash",
++ .bankwidth = 2,
++ .read = brcm_physmap_read16,
++ .copy_from = brcm_physmap_copy_from,
++ .write = brcm_physmap_write16,
++ .copy_to = brcm_physmap_copy_to
++
++};
++
++
++
++int __init init_brcm_physmap(void)
++{
++ PFILE_TAG pTag = NULL;
++ u_int32_t rootfs_addr, kernel_addr,fs_len,cfe_len;
++ FLASH_ADDR_INFO info;
++
++ kerSysFlashAddrInfoGet( &info );
++
++ /* Read the flash memory map from flash memory. */
++ if (!(pTag = kerSysImageTagGet())) {
++ printk("Failed to read image tag from flash\n");
++ return -EIO;
++ }
++
++ rootfs_addr = (u_int32_t) simple_strtoul(pTag->rootfsAddress, NULL, 10);
++ kernel_addr = (u_int32_t) simple_strtoul(pTag->kernelAddress, NULL, 10);
++
++
++ brcm_physmap_map.size = FLASH_4M_SIZE;
++
++ fs_len = kernel_addr - rootfs_addr;
++ cfe_len=CFE_SIZE;
++ /* Ron mapping from fs */
++ brcm_physmap_map.map_priv_1 = (unsigned long)CFE_ADDR;
++
++ if (!brcm_physmap_map.map_priv_1) {
++ printk("Wrong flash starting address\n");
++ return -EIO;
++ }
++
++ if (brcm_physmap_map.size <= 0) {
++ printk("Wrong flash size\n");
++ return -EIO;
++ }
++
++ mymtd = do_map_probe("cfi_probe", &brcm_physmap_map);
++ if (!mymtd)
++ return -EIO;
++
++ mymtd->owner = THIS_MODULE;
++ /* Ron file system */
++ brcm_partition_info[0].name = "fs";
++ brcm_partition_info[0].offset = (cfe_len + TAG_SIZE);
++ brcm_partition_info[0].size = fs_len;
++ brcm_partition_info[0].mask_flags = 0;
++
++ /* Ron tag + file system + kernel */
++ brcm_partition_info[1].name = "tag+fs+kernel";
++ brcm_partition_info[1].offset = cfe_len;
++ brcm_partition_info[1].size = FS_KERNEL_SIZE_4M;
++ brcm_partition_info[1].mask_flags = 0;
++
++ /* Ron bootloader */
++ brcm_partition_info[2].name = "bootloader";
++ brcm_partition_info[2].offset = 0x00;
++ brcm_partition_info[2].size = cfe_len;
++ brcm_partition_info[2].mask_flags = 0;
++
++ /* Ron nvram */
++ brcm_partition_info[3].name = "nvram";
++ brcm_partition_info[3].offset = NVRAM_ADDR_4M;
++ brcm_partition_info[3].size = NVRAM_SIZE;
++ brcm_partition_info[3].mask_flags = 0;
++
++ add_mtd_partitions(mymtd, brcm_partition_info, 4);
++
++ return 0;
++
++}
++
++static void __exit cleanup_brcm_physmap(void)
++{
++if (mymtd) {
++ del_mtd_partitions(mymtd);
++ del_mtd_device(mymtd);
++ map_destroy(mymtd);
++}
++if (brcm_physmap_map.map_priv_1) {
++ brcm_physmap_map.map_priv_1 = 0;
++}
++}
++
++module_init(init_brcm_physmap);
++module_exit(cleanup_brcm_physmap);
++
++
++MODULE_LICENSE("GPL");
++MODULE_AUTHOR("Song Wang songw@broadcom.com");
++MODULE_DESCRIPTION("Configurable MTD map driver for read-only root file system");
+--- linux-2.6.8.1/drivers/mtd/maps/Makefile 2004-08-14 12:54:46.000000000 +0200
++++ linux-2.6.8.1-brcm63xx/drivers/mtd/maps/Makefile 2006-06-26 09:07:13.000000000 +0200
+@@ -39,13 +39,13 @@
+ obj-$(CONFIG_MTD_SCx200_DOCFLASH)+= scx200_docflash.o
+ obj-$(CONFIG_MTD_DBOX2) += dbox2-flash.o
+ obj-$(CONFIG_MTD_OCELOT) += ocelot.o
++obj-$(CONFIG_MTD_LASAT) += lasat.o
+ obj-$(CONFIG_MTD_SOLUTIONENGINE)+= solutionengine.o
+ obj-$(CONFIG_MTD_PCI) += pci.o
+-obj-$(CONFIG_MTD_PB1XXX) += pb1xxx-flash.o
+-obj-$(CONFIG_MTD_DB1X00) += db1x00-flash.o
+-obj-$(CONFIG_MTD_PB1550) += pb1550-flash.o
+-obj-$(CONFIG_MTD_DB1550) += db1550-flash.o
+ obj-$(CONFIG_MTD_LASAT) += lasat.o
++obj-$(CONFIG_MTD_DB1X00) += db1x00-flash.o
++obj-$(CONFIG_MTD_PB1550) += pb1550-flash.o
++obj-$(CONFIG_MTD_DB1550) += db1550-flash.o
+ obj-$(CONFIG_MTD_AUTCPU12) += autcpu12-nvram.o
+ obj-$(CONFIG_MTD_EDB7312) += edb7312.o
+ obj-$(CONFIG_MTD_IMPA7) += impa7.o
+@@ -64,3 +64,11 @@
+ obj-$(CONFIG_MTD_IXP4XX) += ixp4xx.o
+ obj-$(CONFIG_MTD_WRSBC8260) += wr_sbc82xx_flash.o
+ obj-$(CONFIG_MTD_DMV182) += dmv182.o
++obj-$(CONFIG_MTD_PB1000) += pb1xxx-flash.o
++obj-$(CONFIG_MTD_PB1100) += pb1xxx-flash.o
++obj-$(CONFIG_MTD_PB1500) += pb1xxx-flash.o
++obj-$(CONFIG_MTD_DB1X00) += db1x00-flash.o
++# CONFIG_MIPS_BRCM Begin Broadcom changed code.
++obj-$(CONFIG_MTD_BCM963XX) += bcm963xx.o
++EXTRA_CFLAGS += -I$(INC_BRCMDRIVER_PUB_PATH)/$(BRCM_BOARD)
++# CONFIG_MIPS_BRCM End Broadcom changed code.
+--- linux-2.6.8.1/drivers/mtd/maps/Kconfig 2004-08-14 12:56:23.000000000 +0200
++++ linux-2.6.8.1-brcm63xx/drivers/mtd/maps/Kconfig 2006-06-26 09:07:13.000000000 +0200
+@@ -60,6 +60,12 @@
+ Ignore this option if you use run-time physmap configuration
+ (i.e., run-time calling physmap_configure()).
+
++config MTD_BCM963XX
++ tristate "Broadcom 963xx ADSL board flash memory support"
++ depends on MIPS_BRCM
++ help
++ Broadcom 963xx ADSL board flash memory
++
+ config MTD_SUN_UFLASH
+ tristate "Sun Microsystems userflash support"
+ depends on (SPARC32 || SPARC64) && MTD_CFI
+@@ -182,41 +188,12 @@
+ help
+ Support for the flash chip on Tsunami TIG bus.
+
+-config MTD_LASAT
+- tristate "Flash chips on LASAT board"
+- depends on LASAT
+- help
+- Support for the flash chips on the Lasat 100 and 200 boards.
+-
+ config MTD_NETtel
+ tristate "CFI flash device on SnapGear/SecureEdge"
+ depends on X86 && MTD_PARTITIONS && MTD_JEDECPROBE
+ help
+ Support for flash chips on NETtel/SecureEdge/SnapGear boards.
+
+-config MTD_PB1XXX
+- tristate "Flash devices on Alchemy PB1xxx boards"
+- depends on MIPS && ( MIPS_PB1000 || MIPS_PB1100 || MIPS_PB1500 )
+- help
+- Flash memory access on Alchemy Pb1000/Pb1100/Pb1500 boards
+-
+-config MTD_PB1XXX_BOOT
+- bool "PB1x00 boot flash device"
+- depends on MTD_PB1XXX && ( MIPS_PB1100 || MIPS_PB1500 )
+- help
+- Use the first of the two 32MiB flash banks on Pb1100/Pb1500 board.
+- You can say 'Y' to both this and 'MTD_PB1XXX_USER' below, to use
+- both banks.
+-
+-config MTD_PB1XXX_USER
+- bool "PB1x00 user flash device"
+- depends on MTD_PB1XXX && ( MIPS_PB1100 || MIPS_PB1500 )
+- default y if MTD_PB1XX_BOOT = n
+- help
+- Use the second of the two 32MiB flash banks on Pb1100/Pb1500 board.
+- You can say 'Y' to both this and 'MTD_PB1XXX_BOOT' above, to use
+- both banks.
+-
+ config MTD_PB1550
+ tristate "Flash devices on Alchemy PB1550 board"
+ depends on MIPS && MIPS_PB1550
+@@ -338,6 +315,80 @@
+ Mapping for the Flaga digital module. If you don´t have one, ignore
+ this setting.
+
++config MTD_PB1000
++ tristate "Pb1000 Boot Flash device"
++ depends on MIPS && MIPS_PB1000
++ help
++ Flash memory access on Alchemy Pb1000
++
++config MTD_PB1100
++ tristate "Pb1100 Flash device"
++ depends on MIPS && MIPS_PB1100
++ help
++ Flash memory access on Alchemy Pb1100
++
++config MTD_PB1500
++ tristate "Pb1500 Flash device"
++ depends on MIPS && MIPS_PB1500
++ help
++ Flash memory access on Alchemy Pb1500
++
++config MTD_PB1500_BOOT
++ bool "Pb1100/Pb1500 Boot Flash device"
++ depends on MIPS && (MTD_PB1500 || MTD_PB1100)
++ help
++ Use the first of the two 32MB flash banks on Pb1100/Pb1500 board.
++ You can say 'Y' to both this and the USER flash option, to use
++ both banks.
++
++config MTD_PB1500_USER
++ bool "Pb1100/Pb1500 User Flash device (2nd 32MB bank)"
++ depends on MIPS && (MTD_PB1500 || MTD_PB1100)
++ help
++ Use the second of the two 32MB flash banks on Pb1100/Pb1500 board.
++ You can say 'Y' to both this and the BOOT flash option, to use
++ both banks.
++
++config MTD_DB1X00
++ tristate "Db1X00 Flash device"
++ depends on MIPS && (MIPS_DB1000 || MIPS_DB1100 || MIPS_DB1500)
++ help
++ Flash memory access on Alchemy Db1X00 Boards
++
++config MTD_DB1X00_BOOT
++ bool "Db1X00 Boot Flash device"
++ depends on MIPS && MTD_DB1X00
++ help
++ Use the first of the two 32MB flash banks on Db1X00 board.
++ You can say 'Y' to both this and the USER flash option, to use
++ both banks.
++
++config MTD_DB1X00_USER
++ bool "Db1X00 User Flash device (2nd 32MB bank)"
++ depends on MIPS && MTD_DB1X00
++ help
++ Use the second of the two 32MB flash banks on Db1X00 boards.
++ You can say 'Y' to both this and the BOOT flash option, to use
++ both banks.
++
++config MTD_BOSPORUS
++ tristate "Bosporus Flash device"
++ depends on MIPS && MIPS_BOSPORUS
++ help
++ Flash memory access on Alchemy Bosporus Board
++
++config MTD_XXS1500
++ tristate "MyCable XXS1500 Flash device"
++ depends on MIPS && MIPS_XXS1500
++ help
++ Flash memory access on MyCable XXS1500 Board
++
++config MTD_MTX1
++ tristate "4-G Systems MTX-1 Flash device"
++ depends on MIPS && MIPS_MTX1
++ help
++ Flash memory access on 4-G Systems MTX-1 Board
++
+ config MTD_BEECH
+ tristate "CFI Flash device mapped on IBM 405LP Beech"
+ depends on MTD_CFI && PPC32 && 40x && BEECH
+@@ -422,6 +473,12 @@
+ NVRAM on the Momenco Ocelot board. If you have one of these boards
+ and would like access to either of these, say 'Y'.
+
++config MTD_LASAT
++ tristate "LASAT flash device"
++ depends on LASAT && MTD_CFI
++ help
++ Support for the flash chips on the Lasat 100 and 200 boards.
++
+ config MTD_SOLUTIONENGINE
+ tristate "CFI Flash device mapped on Hitachi SolutionEngine"
+ depends on SUPERH && MTD_CFI && MTD_REDBOOT_PARTS
+--- linux-2.6.8.1/drivers/usb/host/Makefile 2004-08-14 12:56:23.000000000 +0200
++++ linux-2.6.8.1-brcm63xx/drivers/usb/host/Makefile 2006-06-26 09:07:14.000000000 +0200
+@@ -8,3 +8,7 @@
+ obj-$(CONFIG_USB_UHCI_HCD) += uhci-hcd.o
+
+ obj-$(CONFIG_USB_SL811HS) += hc_sl811.o
++
++ifeq ($(CONFIG_MIPS_BRCM),y)
++EXTRA_CFLAGS += -DCONFIG_SWAP_IO_SPACE -D__MIPSEB__
++endif
+\ No newline at end of file
+--- linux-2.6.8.1/include/asm-mips/addrspace.h 2004-08-14 12:54:47.000000000 +0200
++++ linux-2.6.8.1-brcm63xx/include/asm-mips/addrspace.h 2006-06-26 09:07:15.000000000 +0200
+@@ -11,7 +11,13 @@
+ #define _ASM_ADDRSPACE_H
+
+ #include <linux/config.h>
++#ifdef __KERNEL__
++#if defined(CONFIG_BCM_ENDPOINT_MODULE)
++#include <asm/mach-generic/spaces.h>
++#else
+ #include <spaces.h>
++#endif
++#endif
+
+ /*
+ * Configure language
+--- linux-2.6.8.1/include/asm-mips/bootinfo.h 2004-08-14 12:54:51.000000000 +0200
++++ linux-2.6.8.1-brcm63xx/include/asm-mips/bootinfo.h 2006-06-26 09:07:15.000000000 +0200
+@@ -210,6 +210,16 @@
+ #define MACH_GROUP_TITAN 22 /* PMC-Sierra Titan */
+ #define MACH_TITAN_YOSEMITE 1 /* PMC-Sierra Yosemite */
+
++#if defined(CONFIG_MIPS_BRCM)
++/*
++ * Valid machtype for group BRCM
++ */
++#define MACH_GROUP_BRCM 23 /* Broadcom boards */
++#define MACH_BCM96338 0
++#define MACH_BCM96345 1
++#define MACH_BCM96348 2
++#endif
++
+ #define CL_SIZE COMMAND_LINE_SIZE
+
+ const char *get_system_type(void);
+--- linux-2.6.8.1/include/asm-mips/cpu.h 2004-08-14 12:54:50.000000000 +0200
++++ linux-2.6.8.1-brcm63xx/include/asm-mips/cpu.h 2006-06-26 09:07:15.000000000 +0200
+@@ -71,6 +71,11 @@
+ #define PRID_IMP_4KEMPR2 0x9100
+ #define PRID_IMP_4KSD 0x9200
+ #define PRID_IMP_24K 0x9300
++#if defined(CONFIG_MIPS_BRCM)
++#define PRID_IMP_BCM6338 0x9000
++#define PRID_IMP_BCM6345 0x8000
++#define PRID_IMP_BCM6348 0x9100
++#endif
+
+ #define PRID_IMP_UNKNOWN 0xff00
+
+@@ -177,7 +182,14 @@
+ #define CPU_VR4133 56
+ #define CPU_AU1550 57
+ #define CPU_24K 58
++#if defined(CONFIG_MIPS_BRCM)
++#define CPU_BCM6338 59
++#define CPU_BCM6345 60
++#define CPU_BCM6348 61
++#define CPU_LAST 61
++#else
+ #define CPU_LAST 58
++#endif
+
+ /*
+ * ISA Level encodings
+diff -urN linux-2.6.8.1/include/asm-mips/mach-bcm963xx/cpu-feature-overrides.h linux-2.6.8.1-brcm63xx/include/asm-mips/mach-bcm963xx/cpu-feature-overrides.h
+--- linux-2.6.8.1/include/asm-mips/mach-bcm963xx/cpu-feature-overrides.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.8.1-brcm63xx/include/asm-mips/mach-bcm963xx/cpu-feature-overrides.h 2006-06-26 09:07:15.000000000 +0200
+@@ -0,0 +1,36 @@
++#ifndef __ASM_MACH_BCM963XX_CPU_FEATURE_OVERRIDES_H
++#define __ASM_MACH_BCM963XX_CPU_FEATURE_OVERRIDES_H
++
++#define cpu_has_tlb 1
++#define cpu_has_4kex 4
++#define cpu_has_4ktlb 8
++#define cpu_has_fpu 0
++#define cpu_has_32fpr 0
++#define cpu_has_counter 0x40
++#define cpu_has_watch 0
++#define cpu_has_mips16 0
++#define cpu_has_divec 0x200
++#define cpu_has_vce 0
++#define cpu_has_cache_cdex_p 0
++#define cpu_has_cache_cdex_s 0
++#define cpu_has_prefetch 0x40000
++#define cpu_has_mcheck 0x2000
++#define cpu_has_ejtag 0x4000
++#define cpu_has_llsc 0x10000
++#define cpu_has_vtag_icache 0
++#define cpu_has_dc_aliases 0
++#define cpu_has_ic_fills_f_dc 0
++
++#define cpu_has_nofpuex 0
++#define cpu_has_64bits 0
++#define cpu_has_64bit_zero_reg 0
++#define cpu_has_64bit_gp_regs 0
++#define cpu_has_64bit_addresses 0
++
++#define cpu_has_subset_pcaches 0
++
++#define cpu_dcache_line_size() 16
++#define cpu_icache_line_size() 16
++#define cpu_scache_line_size() 0
++
++#endif /* __ASM_MACH_BCM963XX_CPU_FEATURE_OVERRIDES_H */
+--- linux-2.6.8.1/include/asm-mips/mach-generic/param.h 2004-08-14 12:55:10.000000000 +0200
++++ linux-2.6.8.1-brcm63xx/include/asm-mips/mach-generic/param.h 2006-06-26 09:07:15.000000000 +0200
+@@ -8,6 +8,10 @@
+ #ifndef __ASM_MACH_GENERIC_PARAM_H
+ #define __ASM_MACH_GENERIC_PARAM_H
+
++#if defined(CONFIG_MIPS_BRCM)
++#define HZ 200 /* Internal kernel timer frequency */
++#else
+ #define HZ 1000 /* Internal kernel timer frequency */
++#endif
+
+ #endif /* __ASM_MACH_GENERIC_PARAM_H */
+--- linux-2.6.8.1/include/asm-mips/page.h 2004-08-14 12:55:10.000000000 +0200
++++ linux-2.6.8.1-brcm63xx/include/asm-mips/page.h 2006-06-26 09:07:15.000000000 +0200
+@@ -13,7 +13,13 @@
+
+ #ifdef __KERNEL__
+
++#if defined(CONFIG_BCM_ENDPOINT_MODULE)
++#include <asm/mach-generic/spaces.h>
++#else
+ #include <spaces.h>
++#endif
++
++#endif
+
+ /*
+ * PAGE_SHIFT determines the page size
+@@ -33,6 +39,7 @@
+ #define PAGE_SIZE (1UL << PAGE_SHIFT)
+ #define PAGE_MASK (~(PAGE_SIZE-1))
+
++#ifdef __KERNEL__
+ #ifndef __ASSEMBLY__
+
+ extern void clear_page(void * page);
+--- linux-2.6.8.1/include/asm-mips/param.h 2004-08-14 12:54:51.000000000 +0200
++++ linux-2.6.8.1-brcm63xx/include/asm-mips/param.h 2006-06-26 09:07:15.000000000 +0200
+@@ -12,7 +12,11 @@
+ #ifdef __KERNEL__
+
+ # include <param.h> /* Internal kernel timer frequency */
++#if defined(CONFIG_BCM_ENDPOINT_MODULE)
++# define USER_HZ HZ /* .. some user interfaces are in "ticks" */
++#else
+ # define USER_HZ 100 /* .. some user interfaces are in "ticks" */
++#endif
+ # define CLOCKS_PER_SEC (USER_HZ) /* like times() */
+ #endif
+
+--- linux-2.6.8.1/include/asm-mips/timex.h 2004-08-14 12:56:15.000000000 +0200
++++ linux-2.6.8.1-brcm63xx/include/asm-mips/timex.h 2006-06-26 09:07:15.000000000 +0200
+@@ -31,7 +31,11 @@
+ * no reason to make this a separate architecture.
+ */
+
++#if defined(CONFIG_BCM_ENDPOINT_MODULE)
++#include <asm/mach-generic/timex.h>
++#else
+ #include <timex.h>
++#endif
+
+ /*
+ * Standard way to access the cycle counter.
+diff -urN linux-2.6.8.1/bcmdrivers/Makefile linux-2.6.8.1-brcm63xx/bcmdrivers/Makefile
+--- linux-2.6.8.1/bcmdrivers/Makefile 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.8.1-brcm63xx/bcmdrivers/Makefile 2006-06-26 09:07:10.000000000 +0200
+@@ -0,0 +1,17 @@
++# File: bcmdrivers/Makefile
++#
++# Makefile for the Linux kernel modules.
++#
++-include $(KERNEL_DIR)/.config
++
++obj-y += opensource/
++
++# If rootfs is nfs, we have to build Ethernet
++# driver as built-n
++ifeq ($(CONFIG_ROOTFS_NFS),y)
++obj-y += broadcom/
++endif
++
++obj-y += broadcom/
++obj-m += broadcom/
++
+diff -urN linux-2.6.8.1/bcmdrivers/broadcom/Makefile linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/Makefile
+--- linux-2.6.8.1/bcmdrivers/broadcom/Makefile 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/Makefile 2006-06-26 10:29:23.000000000 +0200
+@@ -0,0 +1,3 @@
++
++symlinks:
++ #cp ../../../tools/built-in.o built-in.o
+Files linux-2.6.8.1/bcmdrivers/broadcom/built-in.o and linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/built-in.o differ
+diff -urN linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/bcm96348/adslcore6348/adsl_defs.h linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/bcm96348/adslcore6348/adsl_defs.h
+--- linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/bcm96348/adslcore6348/adsl_defs.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/bcm96348/adslcore6348/adsl_defs.h 2006-06-26 09:07:10.000000000 +0200
+@@ -0,0 +1,133 @@
++/* TARGET=bcm6348-dmt-T1-dmtbis-adsl2plus-L2-SRA-firmware-Qproc-HW-RTL-pipeline-IncOneBit-Readsl2-doubleUS */
++
++#define SOURCE_FILE_
++#define BCM6348_SRC
++#define G994_T1P413_1024_FFT
++#define ENABLE_DIG_USPWR_CUTBACK
++#define ADSLCORE_ONLY
++#define TEQ_DF
++#define LOOP_TIMING_PLL
++#define RCV_PHASE_TWEAK_ONLY
++#define ADSL_MAX_POSSIBLE_RCV_RATE
++#define HARDWARE_CHANNEL
++#define ADSL_HARDWARE_AGC
++#define HW_CHANNEL_ADC
++#define HW_CHANNEL_DAC
++#define HW_PGA
++#define DIGITALEC_SINGLE_TAP_UPDATE
++#define ANALOGEC_SINGLE_TAP_UPDATE
++#define HWLOG
++#define G992_TRELLIS_CODE_CLAMPING
++#define G992DECODERTRELLISBOUNDARY
++#define MEMORYLIMIT64K
++#define bcm47xx
++#define DSL_BIG_ENDIAN
++#define MIPS_SRC
++#define VP_INLINE -Winline
++#define USE_ASM_API
++#define RTL_SRC
++#define RSENC_INLINE
++#define BITENC_INLINE
++#define USE_SLOW_DATA
++#define USE_FAST_TEXT
++#define PROFILE_INLINE
++#define CHIP_SRC
++#define G992_RESYNC_PILOT_PHASE_IN_SHOWTIME
++#define G992_APPLY_SSVI
++#define SHARE_TEQ_VARS
++#define ANNEX_M
++#define DOUBLE_UP_STREAM
++#define G994P1_SUPPORT_A43C
++#define USE_ASM_API
++#define MIPS_ASM
++#define MEMORYLIMIT64K
++#define ADSL_FIRMWARE
++#define G992DATA_XMT_COMPACT_WORD
++#define ADSL_MAX_POSSIBLE_RCV_RATE
++#define DSP_FRONTEND_ONLY
++#define G992P3_ONE_BIT_CONSTELLATION
++#define ADSL_MODEM
++#define ATM
++#define ADSL_ATUR
++#define ADSL_SOFTWARE_TIME_ERROR_CALCULATION
++#define DSL_REPORT_ALL_COUNTERS
++#define ADSL_MONITOR_LCD
++#define G994P1
++#define G994P1_ATUR
++#define G992
++#define G992_ATUR
++#define ADSL_FRAMER
++#define G997_1
++#define ATM_I432
++#define TEQ_DF
++#define G992_ATUR_UPSTREAM_SAMPLING_FREQ_276KHZ
++#define G994P1_ATUR_UPSTREAM_SAMPLING_FREQ_276KHZ
++#define G992_TRELLISCODE
++#define ADSL_HARDWARE_ECHO_CANCELLOR
++#define G992P1
++#define G992P1_ATUR
++#define G992P1_ANNEX_A
++#define ADSL_HARDWARE_TIME_ERROR_TRACKING
++#define G992P1_NEWFRAME
++#define G992P1_NEWFRAME_ATUR
++#define G992P1_ANNEX_A_USED_FOR_G992P2
++#define T1P413
++#define G992_ATUR_UPSTREAM_SAMPLING_FREQ_276KHZ
++#define G992_CALC_DEBUG_SNR_BEFORE_TEQ
++#define G992P3
++#define RATE_SELECT_E14
++#define G992P3_ATUR
++#define G992P3AMENDMENT
++#define GLOBESPAN_DM
++#define G992P3_COMB_MSG_THREE_COPIES
++#define G992P3_POWER_MANAGEMENT
++#define G992P3_SRA
++#define G992P5
++#define G992P5_ATUR
++#define ADSL_PIPELINE_CODE
++#define ADSL_HARDWARE_TIME_ERROR_TRACKING
++#define G994P1RCV_QPROC
++#define G994P1XMT_QPROC
++#define G992RCV_QPROC
++#define G992XMT_QPROC
++#define G992RCV_RS
++#define VP_SIMULATOR
++#define T1P413RCV_QPROC
++#define T1P413XMT_QPROC
++#define G992ENC_HW_DATAMODE
++#define G992DATA_XMT_HW_RS
++#define G992DATA_XMT_COMPACT_WORD
++#define G992RCV_QPROC_FAST
++#define G992_BIT_SWAP
++#define ADSL_IDENTIFY_VENDOR_FIRMWARE
++#define ADSL_ATUR_FORCE_BIGGER_UPSTREAM_MARGIN
++#define G992_MORE_FRAME_MODE
++#define XMT_RACT2_FOR_ADI_COMPATIBILITY
++#define XMT_FFT_SIZE_2X
++#define SYNCH_SYMBOL_DETECTION
++#define ANSI_CACT12_PING_PONG
++#define ADSL_SPECIAL_FIX_FOR_FRENCH_TELECOM
++#define G994P1_CHECK_SECURITY
++#define G994P1_NON_STD_INFO
++#define I432_HEADER_COMPRESSION
++#define TDC_IOP_FIX_ERICSSON_TI_4000C_350
++#define TDC_IOP_FIX_SEIMENS_TI
++#define FT_ADI_US_RATE_FIX
++#define ANSI_CACT12_PING_PONG
++#define G992_ATUR_UPSTREAM_SAMPLING_FREQ_276KHZ
++#define G994P1_ATUR_UPSTREAM_SAMPLING_FREQ_276KHZ
++#define READSL2
++#define G992_APPLY_SSVI
++#define READSL2_FILTERS
++
++
++#define ADSL_PHY_XFACE_OFFSET 0x21F90
++
++
++#define ADSL_PHY_SDRAM_BIAS 0x1A0000
++
++
++#define ADSL_PHY_SDRAM_LINK_OFFSET 0x1A0000
++
++
++#define ADSL_PHY_SDRAM_PAGE_SIZE 0x200000
+diff -urN linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/bcm96348/adslcore6348/adsl_lmem.h linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/bcm96348/adslcore6348/adsl_lmem.h
+--- linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/bcm96348/adslcore6348/adsl_lmem.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/bcm96348/adslcore6348/adsl_lmem.h 2006-06-26 09:07:10.000000000 +0200
+@@ -0,0 +1,6 @@
++/*
++** Don't change!
++** This file has been generated automatically by bin2c program
++*/
++
++extern const unsigned char adsl_lmem[51036];
+diff -urN linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/bcm96348/adslcore6348/adsl_sdram.h linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/bcm96348/adslcore6348/adsl_sdram.h
+--- linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/bcm96348/adslcore6348/adsl_sdram.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/bcm96348/adslcore6348/adsl_sdram.h 2006-06-26 09:07:10.000000000 +0200
+@@ -0,0 +1,6 @@
++/*
++** Don't change!
++** This file has been generated automatically by bin2c program
++*/
++
++extern const unsigned char adsl_sdram[364348];
+diff -urN linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/AdslCoreDefs.h linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/AdslCoreDefs.h
+--- linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/AdslCoreDefs.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/AdslCoreDefs.h 2006-06-26 09:07:10.000000000 +0200
+@@ -0,0 +1,245 @@
++/*
++<:copyright-broadcom
++
++ Copyright (c) 2002 Broadcom Corporation
++ All Rights Reserved
++ No portions of this material may be reproduced in any form without the
++ written permission of:
++ Broadcom Corporation
++ 16215 Alton Parkway
++ Irvine, California 92619
++ All information contained in this document is Broadcom Corporation
++ company private, proprietary, and trade secret.
++
++:>
++*/
++/****************************************************************************
++ *
++ * AdslCore.c -- Bcm ADSL core driver
++ *
++ * Description:
++ * This file contains BCM ADSL core driver
++ *
++ *
++ * Copyright (c) 2000-2001 Broadcom Corporation
++ * All Rights Reserved
++ * No portions of this material may be reproduced in any form without the
++ * written permission of:
++ * Broadcom Corporation
++ * 16215 Alton Parkway
++ * Irvine, California 92619
++ * All information contained in this document is Broadcom Corporation
++ * company private, proprietary, and trade secret.
++ * Authors: Ilya Stomakhin
++ *
++ * $Revision: 1.4 $
++ *
++ * $Id: AdslCoreDefs.h,v 1.4 2004/07/20 23:45:48 ilyas Exp $
++ *
++ * $Log: AdslCoreDefs.h,v $
++ * Revision 1.4 2004/07/20 23:45:48 ilyas
++ * Added driver version info, SoftDslPrintf support. Fixed G.997 related issues
++ *
++ * Revision 1.3 2004/06/10 00:20:33 ilyas
++ * Added L2/L3 and SRA
++ *
++ * Revision 1.2 2004/04/12 23:24:38 ilyas
++ * Added default G992P5 PHY definition
++ *
++ * Revision 1.1 2004/04/08 23:59:15 ilyas
++ * Initial CVS checkin
++ *
++ ****************************************************************************/
++
++#ifndef _ADSL_CORE_DEFS_H
++#define _ADSL_CORE_DEFS_H
++
++#if defined(__KERNEL__)
++#include <linux/config.h>
++#endif
++
++#if defined(CONFIG_BCM96348) || defined(BOARD_bcm96348) || defined(_BCM96348_) || defined(CONFIG_BCM96338) || defined(BOARD_bcm96338) || defined(_BCM96338_)
++#ifdef ADSL_ANNEXC
++#include "../adslcore6348C/adsl_defs.h"
++#elif defined(ADSL_ANNEXB)
++#include "../adslcore6348B/adsl_defs.h"
++#elif defined(ADSL_SADSL)
++#include "../adslcore6348SA/adsl_defs.h"
++#else
++#include "../adslcore6348/adsl_defs.h"
++#endif
++#endif
++
++#if defined(__KERNEL__) || defined(TARG_OS_RTEMS) || defined(_CFE_)
++#if defined(CONFIG_BCM96345) || defined(BOARD_bcm96345) || defined(_BCM96345_)
++#ifdef ADSL_ANNEXC
++#include "../adslcore6345C/adsl_defs.h"
++#elif defined(ADSL_ANNEXB)
++#include "../adslcore6345B/adsl_defs.h"
++#elif defined(ADSL_SADSL)
++#include "../adslcore6345SA/adsl_defs.h"
++#else
++#include "../adslcore6345/adsl_defs.h"
++#endif
++#endif /* of CONFIG_BCM96345 */
++#else
++#if defined(CONFIG_BCM96345)
++#ifdef ADSL_ANNEXC
++#include "../adslcoreC/adsl_defs.h"
++#elif defined(ADSL_ANNEXB)
++#include "../adslcoreB/adsl_defs.h"
++#elif defined(ADSL_SADSL)
++#include "../adslcoreSA/adsl_defs.h"
++#else
++#include "../adslcore/adsl_defs.h"
++#endif
++#endif /* of CONFIG_BCM96345 */
++#endif /* __KERNEL__ */
++
++#ifdef _WIN32_WCE
++#define ASSERT(a)
++#endif
++
++#include "AdslXfaceData.h"
++
++/* adjust some definitions for the HOST */
++
++#undef GLOBAL_PTR_BIAS
++#undef ADSLCORE_ONLY
++#undef USE_SLOW_DATA
++#undef USE_FAST_TEXT
++#undef VP_SIMULATOR
++#undef bcm47xx
++#undef ADSL_FRAMER
++#undef ATM
++#undef ATM_I432
++#undef DSL_OS
++
++#define HOST_ONLY
++#define G997_1_FRAMER
++#define ADSL_MIB
++
++#ifndef FLATTEN_ADDR_ADJUST
++#define FLATTEN_ADDR_ADJUST 0xFFF00000
++#endif
++
++/* definitions for combo PHY (AnnexA(ADSL2) and AnnexB) */
++
++#if !(defined(ADSL_SINGLE_PHY) || defined(G992_ANNEXC))
++
++#undef G992P1_ANNEX_A
++#define G992P1_ANNEX_A
++#undef G992P3
++#define G992P3
++#undef G992P5
++#define G992P5
++#define G992P1_ANNEX_A
++#undef READSL2
++#define READSL2
++#undef G992P1_ANNEX_A_USED_FOR_G992P2
++#define G992P1_ANNEX_A_USED_FOR_G992P2
++#undef T1P413
++#define T1P413
++
++#undef G992P1_ANNEX_B
++#define G992P1_ANNEX_B
++
++#endif
++
++/* ADSL PHY definition */
++
++typedef struct {
++ unsigned long sdramPageAddr;
++ unsigned long sdramImageAddr;
++ unsigned long sdramImageSize;
++ unsigned long sdramPhyImageAddr;
++ unsigned short fwType;
++ unsigned short chipType;
++ unsigned short mjVerNum;
++ unsigned short mnVerNum;
++ char *pVerStr;
++ unsigned long features[4];
++} adslPhyInfo;
++extern adslPhyInfo adslCorePhyDesc;
++
++/* chip list */
++
++#define kAdslPhyChipMjMask 0xFF00
++#define kAdslPhyChipMnMask 0x00FF
++#define kAdslPhyChipUnknown 0
++#define kAdslPhyChip6345 0x100
++#define kAdslPhyChip6348 0x200
++#define kAdslPhyChipRev0 0
++#define kAdslPhyChipRev1 1
++#define kAdslPhyChipRev2 2
++#define kAdslPhyChipRev3 3
++#define kAdslPhyChipRev4 4
++#define kAdslPhyChipRev5 5
++
++#define ADSL_PHY_SUPPORT(f) AdslFeatureSupported(adslCorePhyDesc.features,f)
++#define ADSL_PHY_SET_SUPPORT(p,f) AdslFeatureSet((p)->features,f)
++
++/* ADSL Driver to/from PHY address and data conversion macros */
++
++#ifdef ADSLDRV_LITTLE_ENDIAN
++#define ADSL_ENDIAN_CONV_LONG(x) ( ((x) << 24) | (((x) << 8) & 0x00FF0000) | (((x) >> 8) & 0x0000FF00) | ((unsigned long)(x) >> 24) )
++#define ADSL_ENDIAN_CONV_SHORT(x) ( ((x) << 8) | ((unsigned short)(x) >> 8) )
++#define ADSL_ENDIAN_CONV_2SHORTS(x) ( ((x) << 16) | ((unsigned long)(x) >> 16) )
++#else
++#define ADSL_ENDIAN_CONV_LONG(x) x
++#define ADSL_ENDIAN_CONV_SHORT(x) x
++#define ADSL_ENDIAN_CONV_2SHORTS(x) x
++#endif
++
++#ifndef ADSL_PHY_XFACE_OFFSET
++#define ADSL_PHY_XFACE_OFFSET 0x00017F90
++#endif
++#define ADSL_LMEM_XFACE_DATA (0xFFF00000 | ADSL_PHY_XFACE_OFFSET)
++
++#ifndef ADSL_PHY_SDRAM_START
++#define ADSL_PHY_SDRAM_START 0x10000000
++#endif
++#ifndef ADSL_PHY_SDRAM_BIAS
++#define ADSL_PHY_SDRAM_BIAS 0x00040000
++#endif
++#define ADSL_PHY_SDRAM_START_4 (ADSL_PHY_SDRAM_START + ADSL_PHY_SDRAM_BIAS)
++
++#ifndef ADSL_PHY_SDRAM_PAGE_SIZE
++#define ADSL_PHY_SDRAM_PAGE_SIZE 0x00080000
++#endif
++
++#ifdef ADSL_PHY_SDRAM_BIAS
++#define ADSL_SDRAM_IMAGE_SIZE (ADSL_PHY_SDRAM_PAGE_SIZE - ADSL_PHY_SDRAM_BIAS)
++#else
++#define ADSL_SDRAM_IMAGE_SIZE (256*1024)
++#endif
++
++
++#ifndef ADSL_PHY_SDRAM_LINK_OFFSET
++#define ADSL_PHY_SDRAM_LINK_OFFSET 0x00040000
++#endif
++
++#define ADSL_SDRAM_TOTAL_SIZE 0x00800000
++#define ADSL_SDRAM_HOST_MIPS_DEFAULT (0xA0000000 | (ADSL_SDRAM_TOTAL_SIZE - ADSL_PHY_SDRAM_PAGE_SIZE + ADSL_PHY_SDRAM_BIAS))
++
++#define ADSLXF ((AdslXfaceData *) ADSL_LMEM_XFACE_DATA)
++
++#define ADSL_MIPS_LMEM_ADDR(a) (((ulong)(a) & 0x19000000) == 0x19000000)
++#define SDRAM_ADDR_TO_HOST(a) ((void *) ((ulong)(a) - adslCorePhyDesc.sdramPhyImageAddr + \
++ (ADSLXF->sdramBaseAddr ? (unsigned long) ADSLXF->sdramBaseAddr : ADSL_SDRAM_HOST_MIPS_DEFAULT)))
++#define SDRAM_ADDR_TO_ADSL(a) ((void *) (adslCorePhyDesc.sdramPhyImageAddr + ((ulong)(a) - \
++ (ADSLXF->sdramBaseAddr ? (unsigned long) ADSLXF->sdramBaseAddr : ADSL_SDRAM_HOST_MIPS_DEFAULT))))
++
++#define ADSL_ADDR_TO_HOST(addr) ADSL_MIPS_LMEM_ADDR(addr) ? (void *) ((ulong) (addr) | FLATTEN_ADDR_ADJUST) : SDRAM_ADDR_TO_HOST(addr)
++
++
++#ifndef DEBUG
++#define DEBUG
++#endif
++
++#ifndef __SoftDslPrintf
++void __SoftDslPrintf(void *gDslVars, char *fmt, int argNum, ...);
++#endif
++
++#endif
++
+diff -urN linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/AdslMib.gh linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/AdslMib.gh
+--- linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/AdslMib.gh 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/AdslMib.gh 2006-06-26 09:07:10.000000000 +0200
+@@ -0,0 +1,94 @@
++/****************************************************************************
++ *
++ * AdslMib.gh
++ *
++ * Description:
++ * This is a header file which defines the type for AdslMib
++ * global variable structure.
++ *
++ *
++ * Copyright (c) 1993-1998 AltoCom, Inc. All rights reserved.
++ * Authors: Ilya Stomakhin
++ *
++ * $Revision: 1.8 $
++ *
++ * $Id: AdslMib.gh,v 1.8 2004/06/04 18:56:01 ilyas Exp $
++ *
++ * $Log: AdslMib.gh,v $
++ * Revision 1.8 2004/06/04 18:56:01 ilyas
++ * Added counter for ADSL2 framing and performance
++ *
++ * Revision 1.7 2003/10/17 21:02:12 ilyas
++ * Added more data for ADSL2
++ *
++ * Revision 1.6 2003/10/14 00:55:27 ilyas
++ * Added UAS, LOSS, SES error seconds counters.
++ * Support for 512 tones (AnnexI)
++ *
++ * Revision 1.5 2003/07/18 19:07:15 ilyas
++ * Merged with ADSL driver
++ *
++ * Revision 1.4 2002/11/13 21:32:49 ilyas
++ * Added adjustK support for Centillium non-standard framing mode
++ *
++ * Revision 1.3 2002/10/31 20:27:13 ilyas
++ * Merged with the latest changes for VxWorks/Linux driver
++ *
++ * Revision 1.2 2002/07/20 00:51:41 ilyas
++ * Merged witchanges made for VxWorks/Linux driver.
++ *
++ * Revision 1.1 2001/12/21 22:39:30 ilyas
++ * Added support for ADSL MIB data objects (RFC2662)
++ *
++ *
++ *****************************************************************************/
++
++#ifndef AdslMibGlobals
++#define AdslMibGlobals
++
++#include "AdslMib.h"
++
++typedef struct
++ {
++ /* MIB data */
++
++ adslMibInfo adslMib;
++
++ /* ADSL state data */
++
++ adslMibNotifyHandlerType notifyHandlerPtr;
++ ulong timeSec;
++ ulong timeMs;
++ Boolean currSecondErrored;
++ Boolean currSecondLOS;
++ Boolean currSecondSES;
++ Boolean currSecondFEC;
++ ulong rcvPower;
++ ulong rcvRateBps;
++ ulong xmtRateBps;
++ ulong linkStatus;
++ G992CodingParams rcvParams;
++ G992CodingParams xmtParams;
++ ulong shtCounters[kG992ShowtimeNumOfMonitorCounters];
++ ulong scratchData;
++ long showtimeMarginThld;
++
++ /* ADSL diag data */
++
++ short snr[kAdslMibMaxToneNum];
++ short showtimeMargin[kAdslMibMaxToneNum];
++ uchar bitAlloc[kAdslMibMaxToneNum];
++ short gain[kAdslMibMaxToneNum];
++ ComplexShort chanCharLin[kAdslMibMaxToneNum];
++ short chanCharLog[kAdslMibMaxToneNum];
++ short quietLineNoise[kAdslMibMaxToneNum];
++
++ ushort nTones;
++ uchar nMsgCnt;
++ ulong g992MsgType;
++ uchar rsOption[1+4];
++ Boolean rsOptionValid;
++ }
++ adslMibVarsStruct;
++
++#endif /* AdslMibGlobals */
+diff -urN linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/AdslMib.h linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/AdslMib.h
+--- linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/AdslMib.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/AdslMib.h 2006-06-26 09:07:10.000000000 +0200
+@@ -0,0 +1,114 @@
++/*
++<:copyright-broadcom
++
++ Copyright (c) 2002 Broadcom Corporation
++ All Rights Reserved
++ No portions of this material may be reproduced in any form without the
++ written permission of:
++ Broadcom Corporation
++ 16215 Alton Parkway
++ Irvine, California 92619
++ All information contained in this document is Broadcom Corporation
++ company private, proprietary, and trade secret.
++
++:>
++*/
++/****************************************************************************
++ *
++ * AdslMib.h
++ *
++ * Description:
++ * This file contains the exported functions and definitions for AdslMib
++ *
++ *
++ * Copyright (c) 1993-1998 AltoCom, Inc. All rights reserved.
++ * Authors: Ilya Stomakhin
++ *
++ * $Revision: 1.9 $
++ *
++ * $Id: AdslMib.h,v 1.9 2004/04/12 23:34:52 ilyas Exp $
++ *
++ * $Log: AdslMib.h,v $
++ * Revision 1.9 2004/04/12 23:34:52 ilyas
++ * Merged the latest ADSL driver chnages for ADSL2+
++ *
++ * Revision 1.8 2004/03/03 20:14:05 ilyas
++ * Merged changes for ADSL2+ from ADSL driver
++ *
++ * Revision 1.7 2003/10/14 00:55:27 ilyas
++ * Added UAS, LOSS, SES error seconds counters.
++ * Support for 512 tones (AnnexI)
++ *
++ * Revision 1.6 2003/07/18 19:07:15 ilyas
++ * Merged with ADSL driver
++ *
++ * Revision 1.5 2002/10/31 20:27:13 ilyas
++ * Merged with the latest changes for VxWorks/Linux driver
++ *
++ * Revision 1.4 2002/07/20 00:51:41 ilyas
++ * Merged witchanges made for VxWorks/Linux driver.
++ *
++ * Revision 1.3 2002/01/13 22:25:40 ilyas
++ * Added functions to get channels rate
++ *
++ * Revision 1.2 2002/01/03 06:03:36 ilyas
++ * Handle byte moves tha are not multiple of 2
++ *
++ * Revision 1.1 2001/12/21 22:39:30 ilyas
++ * Added support for ADSL MIB data objects (RFC2662)
++ *
++ *
++ *****************************************************************************/
++
++#ifndef AdslMibHeader
++#define AdslMibHeader
++
++#if defined(_CFE_)
++#include "lib_types.h"
++#include "lib_string.h"
++#endif
++
++#include "AdslMibDef.h"
++
++/* Interface functions */
++
++typedef int (SM_DECL *adslMibNotifyHandlerType) (void *gDslVars, ulong event);
++
++extern Boolean AdslMibInit(void *gDslVars);
++extern void AdslMibTimer(void *gDslVars, long timeMs);
++extern void AdslMibStatusSnooper (void *gDslVars, dslStatusStruct *status);
++extern void AdslMibSetNotifyHandler(void *gDslVars, adslMibNotifyHandlerType notifyHandlerPtr);
++extern int AdslMibGetModulationType(void *gDslVars);
++extern Boolean AdslMibIsAdsl2Mod(void *gDslVars);
++extern int AdslMibGetActiveChannel(void *gDslVars);
++extern int AdslMibGetGetChannelRate(void *gDslVars, int dir, int channel);
++extern Boolean AdslMibIsLinkActive(void *gDslVars);
++extern int AdslMibPowerState(void *gDslVars);
++extern int AdslMibTrainingState (void *gDslVars);
++extern void AdslMibClearData(void *gDslVars);
++extern void AdslMibClearBertResults(void *gDslVars);
++extern void AdslMibBertStartEx(void *gDslVars, ulong bertSec);
++extern void AdslMibBertStopEx(void *gDslVars);
++extern ulong AdslMibBertContinueEx(void *gDslVars, ulong totalBits, ulong errBits);
++extern void AdslMibSetLPR(void *gDslVars);
++extern void AdslMibSetShowtimeMargin(void *gDslVars, long showtimeMargin);
++extern void AdslMibResetConectionStatCounters(void *gDslVars);
++
++extern void AdslMibByteMove (int size, void* srcPtr, void* dstPtr);
++extern void AdslMibByteClear(int size, void* dstPtr);
++extern int AdslMibStrCopy(char *srcPtr, char *dstPtr);
++
++/* AdslMibGetData dataId codes */
++
++#define kAdslMibDataAll 0
++
++extern void *AdslMibGetData (void *gDslVars, int dataId, void *pAdslMibData);
++
++extern int AdslMibGetObjectValue (
++ void *gDslVars,
++ uchar *objId,
++ int objIdLen,
++ uchar *dataBuf,
++ ulong *dataBufLen);
++
++#endif /* AdslMibHeader */
+diff -urN linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/AdslMibOid.h linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/AdslMibOid.h
+--- linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/AdslMibOid.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/AdslMibOid.h 2006-06-26 09:07:10.000000000 +0200
+@@ -0,0 +1,177 @@
++/*
++<:copyright-broadcom
++
++ Copyright (c) 2002 Broadcom Corporation
++ All Rights Reserved
++ No portions of this material may be reproduced in any form without the
++ written permission of:
++ Broadcom Corporation
++ 16215 Alton Parkway
++ Irvine, California 92619
++ All information contained in this document is Broadcom Corporation
++ company private, proprietary, and trade secret.
++
++:>
++*/
++/****************************************************************************
++ *
++ * AdslMibOid.h
++ *
++ * Description:
++ * SNMP object identifiers for ADSL MIB and other related MIBs
++ *
++ * Copyright (c) 1993-1998 AltoCom, Inc. All rights reserved.
++ * Authors: Ilya Stomakhin
++ *
++ * $Revision: 1.5 $
++ *
++ * $Id: AdslMibOid.h,v 1.5 2004/06/04 18:56:01 ilyas Exp $
++ *
++ * $Log: AdslMibOid.h,v $
++ * Revision 1.5 2004/06/04 18:56:01 ilyas
++ * Added counter for ADSL2 framing and performance
++ *
++ * Revision 1.4 2003/10/17 21:02:12 ilyas
++ * Added more data for ADSL2
++ *
++ * Revision 1.3 2003/10/14 00:55:27 ilyas
++ * Added UAS, LOSS, SES error seconds counters.
++ * Support for 512 tones (AnnexI)
++ *
++ * Revision 1.2 2002/07/20 00:51:41 ilyas
++ * Merged witchanges made for VxWorks/Linux driver.
++ *
++ * Revision 1.1 2001/12/21 22:39:30 ilyas
++ * Added support for ADSL MIB data objects (RFC2662)
++ *
++ *
++ *****************************************************************************/
++
++#ifndef AdslMibOidHeader
++#define AdslMibOidHeader
++
++#define kOidAdsl 94
++#define kOidAdslInterleave 124
++#define kOidAdslFast 125
++#define kOidAtm 37
++
++#define kOidAdslLine 1
++#define kOidAdslMibObjects 1
++
++#define kOidAdslLineTable 1
++#define kOidAdslLineEntry 1
++#define kOidAdslLineCoding 1
++#define kOidAdslLineType 2
++#define kOidAdslLineSpecific 3
++#define kOidAdslLineConfProfile 4
++#define kOidAdslLineAlarmConfProfile 5
++
++#define kOidAdslAtucPhysTable 2
++#define kOidAdslAturPhysTable 3
++#define kOidAdslPhysEntry 1
++#define kOidAdslPhysInvSerialNumber 1
++#define kOidAdslPhysInvVendorID 2
++#define kOidAdslPhysInvVersionNumber 3
++#define kOidAdslPhysCurrSnrMgn 4
++#define kOidAdslPhysCurrAtn 5
++#define kOidAdslPhysCurrStatus 6
++#define kOidAdslPhysCurrOutputPwr 7
++#define kOidAdslPhysCurrAttainableRate 8
++
++#define kOidAdslAtucChanTable 4
++#define kOidAdslAturChanTable 5
++#define kOidAdslChanEntry 1
++#define kOidAdslChanInterleaveDelay 1
++#define kOidAdslChanCurrTxRate 2
++#define kOidAdslChanPrevTxRate 3
++#define kOidAdslChanCrcBlockLength 4
++
++#define kOidAdslAtucPerfDataTable 6
++#define kOidAdslAturPerfDataTable 7
++#define kOidAdslPerfDataEntry 1
++#define kOidAdslPerfLofs 1
++#define kOidAdslPerfLoss 2
++#define kOidAdslPerfLprs 3
++#define kOidAdslPerfESs 4
++#define kOidAdslPerfValidIntervals 5
++#define kOidAdslPerfInvalidIntervals 6
++#define kOidAdslPerfCurr15MinTimeElapsed 7
++#define kOidAdslPerfCurr15MinLofs 8
++#define kOidAdslPerfCurr15MinLoss 9
++#define kOidAdslPerfCurr15MinLprs 10
++#define kOidAdslPerfCurr15MinESs 11
++#define kOidAdslPerfCurr1DayTimeElapsed 12
++#define kOidAdslPerfCurr1DayLofs 13
++#define kOidAdslPerfCurr1DayLoss 14
++#define kOidAdslPerfCurr1DayLprs 15
++#define kOidAdslPerfCurr1DayESs 16
++#define kOidAdslPerfPrev1DayMoniSecs 17
++#define kOidAdslPerfPrev1DayLofs 18
++#define kOidAdslPerfPrev1DayLoss 19
++#define kOidAdslPerfPrev1DayLprs 20
++#define kOidAdslPerfPrev1DayESs 21
++
++#define kOidAdslAtucPerfIntervalTable 8
++#define kOidAdslAturPerfIntervalTable 9
++#define kOidAdslPerfIntervalEntry 1
++#define kOidAdslIntervalNumber 1
++#define kOidAdslIntervalLofs 2
++#define kOidAdslIntervalLoss 3
++#define kOidAdslIntervalLprs 4
++#define kOidAdslIntervalESs 5
++#define kOidAdslIntervalValidData 6
++
++#define kOidAdslAtucChanPerfTable 10
++#define kOidAdslAturChanPerfTable 11
++#define kOidAdslChanPerfEntry 1
++#define kOidAdslChanReceivedBlks 1
++#define kOidAdslChanTransmittedBlks 2
++#define kOidAdslChanCorrectedBlks 3
++#define kOidAdslChanUncorrectBlks 4
++#define kOidAdslChanPerfValidIntervals 5
++#define kOidAdslChanPerfInvalidIntervals 6
++#define kOidAdslChanPerfCurr15MinTimeElapsed 7
++#define kOidAdslChanPerfCurr15MinReceivedBlks 8
++#define kOidAdslChanPerfCurr15MinTransmittedBlks 9
++#define kOidAdslChanPerfCurr15MinCorrectedBlks 10
++#define kOidAdslChanPerfCurr15MinUncorrectBlks 11
++#define kOidAdslChanPerfCurr1DayTimeElapsed 12
++#define kOidAdslChanPerfCurr1DayReceivedBlks 13
++#define kOidAdslChanPerfCurr1DayTransmittedBlks 14
++#define kOidAdslChanPerfCurr1DayCorrectedBlks 15
++#define kOidAdslChanPerfCurr1DayUncorrectBlks 16
++#define kOidAdslChanPerfPrev1DayMoniSecs 17
++#define kOidAdslChanPerfPrev1DayReceivedBlks 18
++#define kOidAdslChanPerfPrev1DayTransmittedBlks 19
++#define kOidAdslChanPerfPrev1DayCorrectedBlks 20
++#define kOidAdslChanPerfPrev1DayUncorrectBlks 21
++
++#define kOidAdslAtucChanIntervalTable 12
++#define kOidAdslAturChanIntervalTable 13
++#define kOidAdslChanIntervalEntry 1
++#define kOidAdslChanIntervalNumber 1
++#define kOidAdslChanIntervalReceivedBlks 2
++#define kOidAdslChanIntervalTransmittedBlks 3
++#define kOidAdslChanIntervalCorrectedBlks 4
++#define kOidAdslChanIntervalUncorrectBlks 5
++#define kOidAdslChanIntervalValidData 6
++
++/* AdslExtra OIDs for kOidAdslPrivate, kOidAdslPrivExtraInfo (defined in AdslMibDef.h) */
++
++#define kOidAdslExtraConnectionInfo 1
++#define kOidAdslExtraConnectionStat 2
++#define kOidAdslExtraFramingMode 3
++#define kOidAdslExtraTrainingState 4
++#define kOidAdslExtraNonStdFramingAdjustK 5
++#define kOidAdslExtraAtmStat 6
++#define kOidAdslExtraDiagModeData 7
++#define kOidAdslExtraAdsl2Info 8
++#define kOidAdslExtraTxPerfCounterInfo 9
++
++#define kOidAtmMibObjects 1
++#define kOidAtmTcTable 4
++#define kOidAtmTcEntry 1
++#define kOidAtmOcdEvents 1
++#define kOidAtmAlarmState 2
++
++#endif /* AdslMibOidHeader */
+diff -urN linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/AdslXfaceData.h linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/AdslXfaceData.h
+--- linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/AdslXfaceData.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/AdslXfaceData.h 2006-06-26 09:07:10.000000000 +0200
+@@ -0,0 +1,129 @@
++/*
++<:copyright-broadcom
++
++ Copyright (c) 2002 Broadcom Corporation
++ All Rights Reserved
++ No portions of this material may be reproduced in any form without the
++ written permission of:
++ Broadcom Corporation
++ 16215 Alton Parkway
++ Irvine, California 92619
++ All information contained in this document is Broadcom Corporation
++ company private, proprietary, and trade secret.
++
++:>
++*/
++/****************************************************************************
++ *
++ * AdslXfaceData.h -- ADSL Core interface data structure
++ *
++ * Description:
++ * To be included both in SoftDsl and BcmAdslCore driver
++ *
++ *
++ * Copyright (c) 2000-2001 Broadcom Corporation
++ * All Rights Reserved
++ * No portions of this material may be reproduced in any form without the
++ * written permission of:
++ * Broadcom Corporation
++ * 16215 Alton Parkway
++ * Irvine, California 92619
++ * All information contained in this document is Broadcom Corporation
++ * company private, proprietary, and trade secret.
++ * Authors: Ilya Stomakhin
++ *
++ * $Revision: 1.9 $
++ *
++ * $Id: AdslXfaceData.h,v 1.9 2004/02/03 02:57:22 ilyas Exp $
++ *
++ * $Log: AdslXfaceData.h,v $
++ * Revision 1.9 2004/02/03 02:57:22 ilyas
++ * Added PHY feature settings
++ *
++ * Revision 1.8 2003/07/18 04:50:21 ilyas
++ * Added shared buffer for clEoc messages to avoid copying thru command buffer
++ *
++ * Revision 1.7 2003/02/25 00:46:32 ilyas
++ * Added T1.413 EOC vendor ID
++ *
++ * Revision 1.6 2003/02/21 23:29:13 ilyas
++ * Added OEM vendor ID parameter for T1.413 mode
++ *
++ * Revision 1.5 2002/09/13 21:17:12 ilyas
++ * Added pointers to version and build string to OEM interface structure
++ *
++ * Revision 1.4 2002/09/07 04:16:29 ilyas
++ * Fixed HOST to ADSL MIPS SDRAM address translation for relocatable images
++ *
++ * Revision 1.3 2002/09/07 01:43:59 ilyas
++ * Added support for OEM parameters
++ *
++ * Revision 1.2 2002/01/22 19:03:10 khp
++ * -put sdramBaseAddr at end of Xface struct
++ *
++ * Revision 1.1 2002/01/15 06:25:08 ilyas
++ * Initial implementation of ADSL core firmware
++ *
++ ****************************************************************************/
++
++#ifndef AdslXfaceDataHeader
++#define AdslXfaceDataHeader
++
++#include "CircBuf.h"
++
++typedef struct _AdslXfaceData {
++ stretchBufferStruct sbSta;
++ stretchBufferStruct sbCmd;
++ unsigned long gfcTable[15];
++ void *sdramBaseAddr;
++} AdslXfaceData;
++
++/* Shared SDRAM configuration data */
++
++#define kAdslOemVendorIdMaxSize 8
++#define kAdslOemVersionMaxSize 32
++#define kAdslOemSerNumMaxSize 32
++#define kAdslOemNonStdInfoMaxSize 64
++
++typedef struct _AdslOemSharedData {
++ unsigned long g994VendorIdLen;
++ unsigned long g994XmtNonStdInfoLen;
++ unsigned long g994RcvNonStdInfoLen;
++ unsigned long eocVendorIdLen;
++ unsigned long eocVersionLen;
++ unsigned long eocSerNumLen;
++ unsigned char g994VendorId[kAdslOemVendorIdMaxSize];
++ unsigned char eocVendorId[kAdslOemVendorIdMaxSize];
++ unsigned char eocVersion[kAdslOemVersionMaxSize];
++ unsigned char eocSerNum[kAdslOemSerNumMaxSize];
++ unsigned char g994XmtNonStdInfo[kAdslOemNonStdInfoMaxSize];
++ unsigned char g994RcvNonStdInfo[kAdslOemNonStdInfoMaxSize];
++ char *gDslVerionStringPtr;
++ char *gDslBuildDataStringPtr;
++ unsigned long t1413VendorIdLen;
++ unsigned char t1413VendorId[kAdslOemVendorIdMaxSize];
++ unsigned long t1413EocVendorIdLen;
++ unsigned char t1413EocVendorId[kAdslOemVendorIdMaxSize];
++ unsigned long clEocBufLen;
++ unsigned char *clEocBufPtr;
++} AdslOemSharedData;
++
++/* feature list */
++
++#define kAdslPhyAnnexA 0
++#define kAdslPhyAnnexB 1
++#define kAdslPhyAnnexC 2
++#define kAdslPhySADSL 3
++#define kAdslPhyAdsl2 4
++#define kAdslPhyAdslG992p3 4
++#define kAdslPhyAdsl2p 5
++#define kAdslPhyAdslG992p5 5
++#define kAdslPhyAnnexI 6
++#define kAdslPhyAdslReAdsl2 7
++#define kAdslPhyG992p2Init 8
++#define kAdslPhyT1P413 9
++
++#define AdslFeatureSupported(fa,f) ((fa)[(f) >> 5] & (1 << ((f) & 0x1F)))
++#define AdslFeatureSet(fa,f) (fa)[(f) >> 5] |= (1 << ((f) & 0x1F))
++
++#endif /* AdslXfaceDataHeader */
+diff -urN linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/BlankList.h linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/BlankList.h
+--- linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/BlankList.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/BlankList.h 2006-06-26 09:07:10.000000000 +0200
+@@ -0,0 +1,87 @@
++/*
++<:copyright-broadcom
++
++ Copyright (c) 2002 Broadcom Corporation
++ All Rights Reserved
++ No portions of this material may be reproduced in any form without the
++ written permission of:
++ Broadcom Corporation
++ 16215 Alton Parkway
++ Irvine, California 92619
++ All information contained in this document is Broadcom Corporation
++ company private, proprietary, and trade secret.
++
++:>
++*/
++/****************************************************************************
++ *
++ * BlankList.h
++ *
++ * Description:
++ * Definition and implementation (via macros and inline functions)
++ * of blank list - list of unused items of any size (not less than
++ * sizeof(void *)
++ *
++ * Copyright (c) 1993-1998 AltoCom, Inc. All rights reserved.
++ * Authors: Ilya Stomakhin
++ *
++ *****************************************************************************/
++
++#ifndef BlankListHeader
++#define BlankListHeader
++
++#define BlankListPeek(head) ((void *) (head))
++#define BlankListNext(p) (*(void **) (p))
++
++#define BlankListAdd(pHead,p) do { \
++ BlankListNext(p) = BlankListNext(pHead); \
++ BlankListNext(pHead) = (void *) (p); \
++} while (0)
++
++#define BlankListAddList(pHead,pFirst,pLast) do { \
++ if (NULL != (pLast)) { \
++ BlankListNext(pLast) = BlankListNext(pHead); \
++ BlankListNext(pHead) = (void *) (pFirst); \
++ } \
++} while (0)
++
++#define BlankListGet(pHead) \
++ BlankListNext(pHead); \
++ { \
++ void **__p; \
++ __p = (void **) BlankListNext(pHead); \
++ if (NULL != __p) \
++ BlankListNext(pHead) = *__p; \
++ }
++
++
++#define BlankListForEach(pHead,f,ref) do { \
++ void *p = BlankListNext(pHead); \
++ \
++ while (NULL != p) { \
++ if ( (f)((p), ref) ) break; \
++ p = BlankListNext(p); \
++ } \
++} while (0)
++
++
++#include "Que.h"
++
++#define BlankListAddQue(pHead,pqHdr) do { \
++ if (NULL != ((QueHeader *)(pqHdr))->tail) { \
++ BlankListNext(((QueHeader *)(pqHdr))->tail) = BlankListNext(pHead); \
++ BlankListNext(pHead) = ((QueHeader *)(pqHdr))->head; \
++ } \
++} while (0)
++
++#include "DList.h"
++
++#define BlankListAddDList(pHead,pDListHead) do { \
++ if (!DListEmpty(pDListHead)) { \
++ BlankListNext(DListLast(pDListHead)) = BlankListNext(pHead); \
++ BlankListNext(pHead) = DListFirst(pDListHead); \
++ } \
++} while (0)
++
++#endif /* BlankListHeader */
++
+diff -urN linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/BlockUtil.h linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/BlockUtil.h
+--- linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/BlockUtil.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/BlockUtil.h 2006-06-26 09:07:10.000000000 +0200
+@@ -0,0 +1,235 @@
++/*
++<:copyright-broadcom
++
++ Copyright (c) 2002 Broadcom Corporation
++ All Rights Reserved
++ No portions of this material may be reproduced in any form without the
++ written permission of:
++ Broadcom Corporation
++ 16215 Alton Parkway
++ Irvine, California 92619
++ All information contained in this document is Broadcom Corporation
++ company private, proprietary, and trade secret.
++
++:>
++*/
++/* BlockUtil.h
++ *
++ * Description:
++ * This file contains the interfaces for the fixed point block
++ * processing utilities.
++ *
++ * Copyright (c) 1993-1998 AltoCom, Inc. All rights reserved.
++ * Authors: Mark Gonikberg, Haixiang Liang.
++ *
++ * $Revision: 1.23 $
++ *
++ * $Id: BlockUtil.h,v 1.23 2004/04/13 00:31:10 ilyas Exp $
++ *
++ * $Log: BlockUtil.h,v $
++ * Revision 1.23 2004/04/13 00:31:10 ilyas
++ * Added standard header for shared ADSL driver files
++ *
++ * Revision 1.22 2003/07/11 01:49:01 gsyu
++ * Added BlockShortClearByLong to speed up performance
++ *
++ * Revision 1.21 2003/07/10 22:35:23 gsyu
++ * Speed up BlockByteXXX performance
++ *
++ * Revision 1.20 2003/07/10 22:15:51 gsyu
++ * Added BlockByteMoveByWord to speed up performance
++ *
++ * Revision 1.19 2002/03/12 00:03:03 yongbing
++ * Modify cplxScaleCplxSymbols to accept a shift value instead of an array of shifts
++ *
++ * Revision 1.18 2001/03/14 00:50:25 georgep
++ * All targets use FEQ_PASS_FFTSHIFT, remove code for case where its not defined
++ *
++ * Revision 1.17 2000/11/30 03:54:09 khp
++ * -BlockRealScaleCplxSymbols instead of BlockScaleComplexSymbols
++ *
++ * Revision 1.16 2000/11/29 20:42:12 liang
++ * Add function for ADSL xmt gains with fixed shift.
++ *
++ * Revision 1.15 2000/10/02 19:24:08 georgep
++ * Modify FEQ for new fft, fft outputs a shift for each block
++ *
++ * Revision 1.14 2000/09/09 00:23:48 liang
++ * Add corresponding functions for the ComplexLong FEQ coef.
++ *
++ * Revision 1.13 2000/05/17 01:36:52 yongbing
++ * Add Pentium MMX assembly codes for more block related functions
++ *
++ * Revision 1.12 2000/04/19 19:22:22 yongbing
++ * Add BlockShortScaleby2 function used in G994p1
++ *
++ * Revision 1.11 2000/04/04 02:28:01 liang
++ * Merged with SoftDsl_0_2 from old tree.
++ *
++ * Revision 1.11 2000/03/14 23:29:01 yongbing
++ * Add Pentim MMX codes for BlockCplxSymbolUpdateCplxScale function
++ *
++ * Revision 1.10 2000/02/16 01:53:00 yongbing
++ * Add Pentium MMX module for FEQ
++ *
++ * Revision 1.9 1999/11/02 02:49:55 liang
++ * Add BlockComplexPower function.
++ *
++ * Revision 1.8 1999/08/05 19:42:34 liang
++ * Merged with the softmodem top of the tree on 08/04/99 for assembly files.
++ *
++ * Revision 1.7 1999/06/16 00:54:39 liang
++ * BlockRealScaleComplexSymbols takes a scale shift buffer now.
++ *
++ * Revision 1.6 1999/05/22 02:18:29 liang
++ * Add one more parameter to BlockCplxSymbolUpdateCplxScale function.
++ *
++ * Revision 1.5 1999/05/14 22:49:39 liang
++ * Added two more functions.
++ *
++ * Revision 1.4 1999/03/26 03:29:57 liang
++ * Add function BlockComplexMultLongAcc.
++ *
++ * Revision 1.3 1999/02/22 22:40:59 liang
++ * BlockByteSum takes uchar inputs instead of schar.
++ *
++ * Revision 1.2 1999/02/10 01:56:44 liang
++ * Added BlockByteSum, BlockRealScaleComplexSymbols and BlockCplxScaleComplexSymbols.
++ *
++ * Revision 1.1 1998/10/28 01:35:38 liang
++ * *** empty log message ***
++ *
++ * Revision 1.12 1998/07/08 17:09:25 scott
++ * Removed unnecessary undefs
++ *
++ * Revision 1.11 1998/04/02 06:19:44 mwg
++ * Added two new utilities.
++ *
++ * Revision 1.10 1998/03/26 23:20:55 liang
++ * Added function BlockShortMultiply.
++ *
++ * Revision 1.9 1998/02/16 18:41:00 scott
++ * Added MMX autodetect support
++ *
++ * Revision 1.8 1997/12/13 06:11:35 mwg
++ * Added new functions:
++ * BlockLongSubtract()
++ * BlockLongAdd()
++ * BlockLong2ShortSubtract()
++ * BlockShort2LongMove()
++ * BlockShortInterpolate()
++ * BlockLongCorrelate()
++ * BlockMapShort2Short()
++ *
++ * Revision 1.7 1997/03/19 18:35:10 mwg
++ * Changed copyright notice.
++ *
++ * Revision 1.6 1997/02/11 00:08:18 mwg
++ * Added BlockByteMove function
++ *
++ * Revision 1.5 1997/02/04 08:40:08 mwg
++ * Changed interface forBlockReal2ComplexMacc()
++ *
++ * Revision 1.4 1997/01/23 02:04:28 mwg
++ * Added return value to BlockShortMove
++ *
++ * Revision 1.3 1996/12/19 22:34:55 mwg
++ * Added new function BlockFullPower().
++ *
++ * Revision 1.2 1996/02/21 03:59:15 mwg
++ * Added new function BlockReal2ComplexMacc
++ *
++ * Revision 1.1.1.1 1996/02/14 02:35:13 mwg
++ * Redesigned the project directory structure. Merged V.34 into the project.
++ *
++ * Revision 1.5 1995/04/04 06:09:32 mwg
++ * Changed the SoftModem status reporting: now the status is a structure/union
++ * where different fields used for different status code. This will enable
++ * efficient status snooping for high level protocols on top of the softmodem.
++ *
++ */
++
++#ifndef BlockUtilPh
++#define BlockUtilPh
++
++extern void BlockLongAdd (int, long*, long*, long*);
++extern void BlockLong2ShortSubtract (int, long*, long*, short*);
++extern void BlockShort2LongMove (int, short*, long*);
++extern void BlockShortMultiply (int, int, short*, short*, short*);
++extern void BlockByteMoveUnaligned (int size, uchar *srcPtr, uchar *dstPtr);
++extern void BlockShortOffset (int, short, short*, short*);
++extern long BlockShortInterpolateWithIncrement (int size, long scaleFactor, long increment, int shift, short* src1Ptr, short* src2Ptr, short* dstPtr);
++extern void BlockReal2ComplexMult (int, short*, ComplexShort*, ComplexShort*);
++extern void BlockComplexConjigateMult (int, ComplexShort*, ComplexShort*, ComplexShort*);
++
++extern long BlockSum (int, short*);
++extern long BlockByteSum (int, uchar*);
++extern void BlockComplexSum (int, ComplexShort*, ComplexLong*);
++extern void BlockComplexPower (int, int, ComplexShort*, long*);
++extern long BlockFullPower (int, short*);
++extern long BlockLongCorrelate (int, long*, long*);
++
++extern int BlockSymbol2Byte (int, int, ushort*, uchar*);
++extern int BlockByte2Symbol (int, int, uchar*, ushort*);
++
++extern void BlockMapShort2Complex (int, ushort*, ComplexByte*, ComplexShort*);
++extern void BlockMapShort2Short (int size, ushort *srcPtr, short *mapPtr, short *dstPtr);
++extern void BlockMapByte2Byte (int size, uchar *srcPtr, uchar *mapPtr, uchar *dstPtr);
++extern void BlockMapByte2Short (int size, uchar *srcPtr, short *mapPtr, short *dstPtr);
++extern void BlockShortMult (int size, int shift, short* src1Ptr, short* src2Ptr, short* dstPtr);
++
++extern int SM_DECL Idle(void);
++
++extern void BlockGenerateAngles(int size, ComplexShort *anglePtr, ComplexShort *incPtr, ComplexShort *dstPtr);
++extern void BlockExtractRealPart(int size, ComplexShort *srcPtr, short *dstPtr);
++extern void BlockShortScaleByShift (int size, int shift, short* srcPtr, short* dstPtr);
++
++#ifndef PENTIUM_REDEFS /* only if these have not been redefined to function pointers */
++extern long BlockPower (int, short*);
++extern void BlockReal2ComplexMacc (int, int, short*, ComplexShort*, ComplexLong*);
++extern void BlockComplexMult (int, ComplexShort*, ComplexShort*, ComplexShort*);
++extern void BlockShortScale (int, short, int, short*, short*);
++extern int SM_DECL BlockShortMove (int, short*, short*);
++extern long BlockCorrelate (int, short*, short*);
++
++extern void BlockRealScaleComplexSymbols(int, int, uchar*, short*, ComplexShort*, ComplexShort*);
++/* FIXME -- the following 3 functions can be removed */
++extern void BlockCplxScaleComplexSymbols(int, int, int, ComplexShort*, ComplexShort*, ComplexShort*);
++extern void BlockCplxSymbolUpdateCplxScale(int, int, int, uchar*, ComplexShort*,
++ ComplexShort*, ComplexShort*, ComplexShort*);
++extern void BlockComplexShortFill (int, short, short, ComplexShort*);
++
++
++extern void BlockRealScaleCplxSymbols(int, int, int, short*, ComplexShort*, ComplexShort*);
++extern void BlockCplxLongConjigateMultCplxShort(int, ComplexLong*, ComplexShort*, ComplexLong*);
++
++extern void BlockCplxLongScaleCplxSymbols(int, int, int, ComplexLong*, ComplexShort*, short*, ComplexShort*);
++extern void BlockCplxSymbolUpdateCplxLongScale(int, int, int, int,
++ ComplexShort*, short *, ComplexLong*, ComplexShort*);
++
++extern void BlockComplexLongFill (int, long, long, ComplexLong*);
++
++extern void BlockShortSubtract (int, short*, short*, short*);
++extern void BlockLongSubtract (int, long*, long*, long*);
++extern void BlockShortAdd (int, short*, short*, short*);
++extern void BlockByteMove (int, uchar*, uchar*);
++extern void BlockByteMoveByLong (int, uchar*, uchar*);
++extern void SM_DECL BlockByteFill (int, uchar, uchar*);
++extern void BlockByteFillByLong (int, uchar, uchar*);
++extern void BlockByteClear (int, uchar*);
++extern void BlockByteClearByLong (int, uchar*);
++extern void BlockShortFill (int, short, short*);
++extern void BlockShortClear (int, short*);
++extern void BlockShortClearByLong (int, short*);
++extern void BlockLongFill (int, long, long*);
++extern void BlockLongClear (int, long*);
++extern void BlockComplexShortClear (int, ComplexShort*);
++extern void BlockShortInvert (int, short*, short*);
++extern void BlockShortScaleDown (int, short*);
++extern void BlockLongMove (int, long*, long*);
++extern void BlockShortInterpolate (int, short, int, short*, short*, short*);
++extern void BlockComplexMultLongAcc (int, int, ComplexShort*, ComplexShort*, ComplexLong*);
++
++#endif
++
++#endif /* BlockUtilPh */
+diff -urN linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/CircBuf.h linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/CircBuf.h
+--- linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/CircBuf.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/CircBuf.h 2006-06-26 09:07:10.000000000 +0200
+@@ -0,0 +1,217 @@
++/*
++<:copyright-broadcom
++
++ Copyright (c) 2002 Broadcom Corporation
++ All Rights Reserved
++ No portions of this material may be reproduced in any form without the
++ written permission of:
++ Broadcom Corporation
++ 16215 Alton Parkway
++ Irvine, California 92619
++ All information contained in this document is Broadcom Corporation
++ company private, proprietary, and trade secret.
++
++:>
++*/
++/****************************************************************************
++ *
++ * CircBuf -- Generic Circular Buffer
++ *
++ * Description:
++ * Implementation of generic circular buffer algorithms
++ *
++ *
++ * Copyright (c) 1993-1998 AltoCom, Inc. All rights reserved.
++ * Authors: Ilya Stomakhin
++ *
++ * $Revision: 1.14 $
++ *
++ * $Id: CircBuf.h,v 1.14 2004/06/24 03:10:37 ilyas Exp $
++ *
++ * $Log: CircBuf.h,v $
++ * Revision 1.14 2004/06/24 03:10:37 ilyas
++ * Added extra macro to be able to use un-cached variable (for status write)
++ *
++ * Revision 1.13 2004/02/09 23:47:02 ilyas
++ * Fixed last change
++ *
++ * Revision 1.12 2004/02/06 22:52:58 ilyas
++ * Improved stretch buffer write
++ *
++ * Revision 1.11 2002/12/30 23:27:55 ilyas
++ * Added macro for HostDma optimizations
++ *
++ * Revision 1.10 2002/10/26 02:15:02 ilyas
++ * Optimized and added new macros for HostDma
++ *
++ * Revision 1.9 2002/01/22 23:59:29 ilyas
++ * Added paraenthesis around macro argument
++ *
++ * Revision 1.8 2002/01/15 22:28:38 ilyas
++ * Extended macro to support readPtr from uncached address
++ *
++ * Revision 1.7 2001/09/21 19:47:05 ilyas
++ * Fixed compiler warnings for VxWorks build
++ *
++ * Revision 1.6 2001/06/07 18:47:56 ilyas
++ * Added more macros for circular buffer arithmetics
++ *
++ * Revision 1.5 2001/04/18 03:58:34 ilyas
++ * Added LOG file write granularity
++ *
++ * Revision 1.4 2001/01/19 04:34:12 ilyas
++ * Added more macros to circular buffer implementation
++ *
++ * Revision 1.3 2001/01/06 04:01:41 ilyas
++ * Changed the way we write status messages
++ *
++ * Revision 1.2 2001/01/04 05:52:21 ilyas
++ * Added implementation of stretchable circular buffer used in LOG and Status
++ * handlers
++ *
++ * Revision 1.1 2000/05/03 03:45:55 ilyas
++ * Original implementation
++ *
++ *
++ *****************************************************************************/
++
++#ifndef CircBufHeader_H_
++#define CircBufHeader_H_
++
++
++typedef struct {
++ char *pStart;
++ char *pEnd;
++ char *pRead;
++ char *pWrite;
++} circBufferStruct;
++
++/* Initialize circular buffer */
++
++#define CircBufferInit(pCB,buf,size) do { \
++ (pCB)->pStart = (char *) (buf); \
++ (pCB)->pRead = (pCB)->pWrite = (pCB)->pStart; \
++ (pCB)->pEnd = (pCB)->pStart + size; \
++} while (0)
++
++#define CircBufferGetSize(pCB) ((pCB)->pEnd - (pCB)->pStart)
++#define CircBufferGetStartPtr(pCB) ((void *) (pCB)->pStart)
++#define CircBufferGetEndPtr(pCB) ((void *) (pCB)->pEnd)
++
++#define CircBufferReset(pCB) (pCB)->pRead = (pCB)->pWrite = (pCB)->pStart
++
++
++#define CircBufferGetReadPtr(pCB) ((void *) (pCB)->pRead)
++#define CircBufferGetWritePtr(pCB) ((void *) (pCB)->pWrite)
++
++
++#ifndef bcm47xx
++#define CircBufferDistance(pCB,p1,p2,d) ((char*)(p2) - (char*)(p1) - d >= 0 ? \
++ (char*)(p2) - (char*)(p1) - d : \
++ ((char*)(p2)- (char*)(p1) - d + ((pCB)->pEnd - (pCB)->pStart)))
++
++#define CircBufferAddContig(pCB,p,n) ((char*)(p) + (n) == (pCB)->pEnd ? (pCB)->pStart : (char*)(p) + (n))
++#else
++static __inline int CircBufferDistance(circBufferStruct *pCB, char *p1, char *p2, int d)
++{
++ int tmp = p2 - p1 - d;
++
++ return (tmp >= 0 ? tmp : tmp + (pCB->pEnd - pCB->pStart));
++}
++
++static __inline char * CircBufferAddContig(circBufferStruct *pCB, char *p, int n)
++{
++ p += n;
++ return (p == pCB->pEnd ? pCB->pStart : p);
++}
++#endif
++
++#define CircBufferAdd(pCB,p,n) ((char*)(p) + (n) >= (pCB)->pEnd ? \
++ (pCB)->pStart + ((char*)(p) + (n) - (pCB)->pEnd) : \
++ (char*)(p) + (n))
++
++#define CircBufferReadUpdate(pCB,n) (pCB)->pRead = CircBufferAdd(pCB,(pCB)->pRead,n)
++#define CircBufferWriteUpdate(pCB,n) (pCB)->pWrite= CircBufferAdd(pCB,(pCB)->pWrite,n)
++
++#define CircBufferReadUpdateContig(pCB,n) (pCB)->pRead = CircBufferAddContig(pCB,(pCB)->pRead,n)
++#define CircBufferWriteUpdateContig(pCB,n) (pCB)->pWrite= CircBufferAddContig(pCB,(pCB)->pWrite,n)
++
++#define CircBufferGetReadAvail(pCB) CircBufferDistance(pCB,(pCB)->pRead,(pCB)->pWrite,0)
++#define CircBufferIsReadEmpty(pCB) ((pCB)->pRead == (pCB)->pWrite)
++#define CircBufferGetWriteAvail(pCB) CircBufferDistance(pCB,(pCB)->pWrite,(pCB)->pRead,1)
++#define CircBufferGetWriteAvailN(pCB,n) CircBufferDistance(pCB,(pCB)->pWrite,(pCB)->pRead,n)
++
++#define CircBufferGetReadContig(pCB) ((unsigned long)(pCB)->pWrite >= (unsigned long) (pCB)->pRead ? \
++ (pCB)->pWrite - (pCB)->pRead : \
++ (pCB)->pEnd - (pCB)->pRead)
++
++#define CircBufferGetWriteContig(pCB) ((pCB)->pEnd - (pCB)->pWrite > CircBufferGetWriteAvail(pCB) ? \
++ CircBufferGetWriteAvail(pCB) : \
++ (pCB)->pEnd - (pCB)->pWrite)
++
++/*
++**
++** structure and macros for "strectch" buffer
++**
++*/
++
++typedef struct {
++ char *pStart;
++ char *pEnd;
++ char *pExtraEnd;
++ char *pStretchEnd;
++ char *pRead;
++ char *pWrite;
++} stretchBufferStruct;
++
++#define StretchBufferInit(pSB,buf,size,extra) do { \
++ (pSB)->pStart = (char *) (buf); \
++ (pSB)->pRead = (pSB)->pWrite = (pSB)->pStart; \
++ (pSB)->pEnd = (pSB)->pStart + (size); \
++ (pSB)->pStretchEnd = (pSB)->pEnd; \
++ (pSB)->pExtraEnd = (pSB)->pEnd+(extra); \
++} while (0)
++
++#define StretchBufferGetSize(pSB) ((pSB)->pEnd - (pSB)->pStart)
++#define StretchBufferGetStartPtr(pSB) ((void *) (pSB)->pStart)
++#define StretchBufferGetReadPtr(pSB) ((void *) (pSB)->pRead)
++#define StretchBufferGetWritePtr(pSB) ((void *) (pSB)->pWrite)
++#define StretchBufferReset(pSB) ((pSB)->pRead = (pSB)->pWrite = (pSB)->pStart)
++
++#define StretchBufferGetReadToEnd(pSB) ((pSB)->pStretchEnd - (pSB)->pRead)
++
++#define StretchBufferGetReadAvail(pSB) ((pSB)->pWrite - (pSB)->pRead >= 0 ? \
++ (pSB)->pWrite - (pSB)->pRead : \
++ (pSB)->pStretchEnd - (pSB)->pRead)
++#define _StretchBufferGetWriteAvail(pSB,rd) ((rd) - (pSB)->pWrite > 0 ? \
++ (rd) - (pSB)->pWrite - 1 : \
++ ((pSB)->pExtraEnd - (pSB)->pWrite))
++#define StretchBufferGetWriteAvail(pSB) _StretchBufferGetWriteAvail(pSB, (pSB)->pRead)
++
++#define StretchBufferReadUpdate(pSB,n) do { \
++ char *p; \
++ \
++ p = (pSB)->pRead + (n); \
++ (pSB)->pRead = (p >= (pSB)->pStretchEnd ? (pSB)->pStart : p); \
++} while (0)
++
++#define _StretchBufferWriteUpdate(pSB,rd,n) do { \
++ char *p; \
++ \
++ p = (pSB)->pWrite + (n); \
++ if (p >= (pSB)->pEnd) { \
++ if ((rd) != (pSB)->pStart) { \
++ (pSB)->pStretchEnd = p; \
++ (pSB)->pWrite = (pSB)->pStart; \
++ } \
++ } \
++ else \
++ (pSB)->pWrite = p; \
++} while (0)
++
++#define StretchBufferWriteUpdate(pSB,n) _StretchBufferWriteUpdate(pSB,(pSB)->pRead,n)
++
++#endif /* CircBufHeader_H_ */
++
++
++
+diff -urN linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/DList.h linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/DList.h
+--- linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/DList.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/DList.h 2006-06-26 09:07:10.000000000 +0200
+@@ -0,0 +1,131 @@
++/*
++<:copyright-broadcom
++
++ Copyright (c) 2002 Broadcom Corporation
++ All Rights Reserved
++ No portions of this material may be reproduced in any form without the
++ written permission of:
++ Broadcom Corporation
++ 16215 Alton Parkway
++ Irvine, California 92619
++ All information contained in this document is Broadcom Corporation
++ company private, proprietary, and trade secret.
++
++:>
++*/
++/****************************************************************************
++ *
++ * DList.h
++ *
++ * Description:
++ * Definition and implementation (via macros and inline functions)
++ * of double-linked list
++ *
++ * Copyright (c) 1993-1998 AltoCom, Inc. All rights reserved.
++ * Authors: Ilya Stomakhin
++ *
++ *****************************************************************************/
++
++#ifndef DListHeader_H_
++#define DListHeader_H_
++
++typedef struct _DListHeader
++ {
++ struct _DListHeader *next; /* next item in the list */
++ struct _DListHeader *prev; /* prev item in the list */
++ } DListHeader;
++
++typedef struct _DListUpHeader
++ {
++ struct _DListUpHeader *next; /* next item in the list */
++ struct _DListUpHeader *prev; /* prev item in the list */
++ struct _DListUpHeader *head; /* head of the list */
++ } DListUpHeader;
++
++/* Double linked list DList management macros */
++
++#define DListInit(pDListHead) do { \
++ ((DListHeader *)(pDListHead))->next = pDListHead; \
++ ((DListHeader *)(pDListHead))->prev = pDListHead; \
++} while (0)
++
++#define DListNext(pDListEntry) (((DListHeader *)(pDListEntry))->next)
++#define DListPrev(pDListEntry) (((DListHeader *)(pDListEntry))->prev)
++
++#define DListEntryLinked(pDListEntry) (NULL != DListNext(pDListEntry))
++#define DListUnlinkEntry(pDListEntry) (DListNext(pDListEntry) = DListPrev(pDListEntry) = NULL)
++
++#define DListFirst(pDListHead) DListNext(pDListHead)
++#define DListLast(pDListHead) DListPrev(pDListHead)
++#define DListValid(pDListHead,pEntry) ((void *)(pDListHead) != (pEntry))
++#define DListEmpty(pDListHead) ((void *)pDListHead == ((DListHeader *)pDListHead)->next)
++
++#define DListInsertAfter(pDListEntry,pEntry) do { \
++ ((DListHeader *)(pEntry))->next = ((DListHeader *)(pDListEntry))->next; \
++ ((DListHeader *)(pEntry))->prev = (DListHeader *)(pDListEntry); \
++ ((DListHeader *)(pDListEntry))->next->prev = (DListHeader *) (pEntry); \
++ ((DListHeader *)(pDListEntry))->next = (DListHeader *) (pEntry); \
++} while (0)
++
++#define DListInsertBefore(pDListEntry,pEntry) do { \
++ ((DListHeader *)(pEntry))->next = (DListHeader *)(pDListEntry); \
++ ((DListHeader *)(pEntry))->prev = ((DListHeader *)(pDListEntry))->prev; \
++ ((DListHeader *)(pDListEntry))->prev->next = (DListHeader *) (pEntry); \
++ ((DListHeader *)(pDListEntry))->prev = (DListHeader *) (pEntry); \
++} while (0)
++
++#define DListInsertTail(pDListHead,pEntry) DListInsertBefore(pDListHead,pEntry)
++#define DListInsertHead(pDListHead,pEntry) DListInsertAfter(pDListHead,pEntry)
++
++#define DListRemove(pDListEntry) do { \
++ ((DListHeader *)(pDListEntry))->prev->next = ((DListHeader *)(pDListEntry))->next; \
++ ((DListHeader *)(pDListEntry))->next->prev = ((DListHeader *)(pDListEntry))->prev; \
++} while (0)
++
++
++#define DListForEach(pDListHead,f,ref) do { \
++ DListHeader *p = ((DListHeader *)(pDListHead))->next; \
++ \
++ while (DListValid(pDListHead,p)) { \
++ DListHeader *p0 = p; \
++ p = DListNext(p); \
++ if ( (f)((void *)p0, ref) ) break; \
++ } \
++} while (0)
++
++
++/* Double linked list with up link DListUp management macros */
++
++#define DListUpInit(pDListHead) do { \
++ ((DListUpHeader *)(pDListHead))->next = (DListUpHeader *) (pDListHead); \
++ ((DListUpHeader *)(pDListHead))->prev = (DListUpHeader *) (pDListHead); \
++ ((DListUpHeader *)(pDListHead))->head = (DListUpHeader *) (pDListHead); \
++} while (0)
++
++#define DListUpNext(pDListEntry) ((DListUpHeader *) DListNext(pDListEntry))
++#define DListUpPrev(pDListEntry) ((DListUpHeader *) DListPrev(pDListEntry))
++#define DListUpHead(pDListEntry) (((DListUpHeader *)(pDListEntry))->head)
++
++#define DListUpFirst(pDListHead) DListUpNext(pDListHead)
++#define DListUpLast(pDListHead) DListUpPrev(pDListHead)
++#define DListUpValid(pEntry) (((DListUpHeader *)(pEntry))->head != (void *) pEntry)
++#define DListUpEmpty(pDListHead) DListEmpty(pDListHead)
++
++#define DListUpInsertAfter(pDListEntry,pEntry) do { \
++ DListInsertAfter(pDListEntry,pEntry); \
++ ((DListUpHeader *)(pEntry))->head = ((DListUpHeader *)(pDListEntry))->head; \
++} while (0)
++
++#define DListUpInsertBefore(pDListEntry,pEntry) do { \
++ DListInsertBefore(pDListEntry,pEntry); \
++ ((DListUpHeader *)(pEntry))->head = ((DListUpHeader *)(pDListEntry))->head; \
++} while (0)
++
++#define DListUpInsertTail(pDListHead,pEntry) DListUpInsertBefore(pDListHead,pEntry)
++#define DListUpInsertHead(pDListHead,pEntry) DListUpInsertAfter(pDListHead,pEntry)
++
++#define DListUpRemove(pDListEntry) DListRemove(pDListEntry)
++#define DListUpForEach(pDListHead,f,ref) DListForEach((DListHeader *)(pDListHead),f,ref)
++
++#endif /* DListHeader_H_ */
++
+diff -urN linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/DslFramer.h linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/DslFramer.h
+--- linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/DslFramer.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/DslFramer.h 2006-06-26 09:07:10.000000000 +0200
+@@ -0,0 +1,159 @@
++/*
++<:copyright-broadcom
++
++ Copyright (c) 2002 Broadcom Corporation
++ All Rights Reserved
++ No portions of this material may be reproduced in any form without the
++ written permission of:
++ Broadcom Corporation
++ 16215 Alton Parkway
++ Irvine, California 92619
++ All information contained in this document is Broadcom Corporation
++ company private, proprietary, and trade secret.
++
++:>
++*/
++/****************************************************************************
++ *
++ * DslFramer.h
++ *
++ * Description:
++ * This file contains common DSL framer definitions
++ *
++ *
++ * Copyright (c) 1993-1998 AltoCom, Inc. All rights reserved.
++ * Authors: Ilya Stomakhin
++ *
++ * $Revision: 1.3 $
++ *
++ * $Id: DslFramer.h,v 1.3 2004/07/21 01:39:41 ilyas Exp $
++ *
++ * $Log: DslFramer.h,v $
++ * Revision 1.3 2004/07/21 01:39:41 ilyas
++ * Reset entire G.997 state on retrain. Timeout in G.997 if no ACK
++ *
++ * Revision 1.2 2004/04/12 23:41:10 ilyas
++ * Added standard header for shared ADSL driver files
++ *
++ * Revision 1.1 2001/12/13 02:28:27 ilyas
++ * Added common framer (DslPacket and G997) and G997 module
++ *
++ *
++ *
++ *****************************************************************************/
++
++#ifndef DslFramerHeader
++#define DslFramerHeader
++
++#include "DList.h"
++
++#define kDslFramerInitialized 0x80000000
++
++/* status codes */
++
++#define kDslFramerRxFrame 1
++#define kDslFramerRxFrameErr 2
++#define kDslFramerTxFrame 3
++#define kDslFramerTxFrameErr 4
++
++#define kDslFramerRxFrameErrFlushed 1
++#define kDslFramerRxFrameErrAbort 2
++#define kDslFramerRxFrameErrPhy 3
++
++#define kDslFramerTxFrameErrFlushed 1
++
++
++typedef struct _dslFramerBufDesc {
++ long pkId;
++ long bufFlags;
++ void *bufPtr;
++ long bufLen;
++} dslFramerBufDesc;
++
++/* data bufDesc flags */
++
++#define kDslFramerStartNewFrame 1
++#define kDslFramerEndOfFrame 2
++#define kDslFramerAbortFrame 4
++
++#define kDslFramerExtraByteShift 3
++#define kDslFramerExtraByteMask (0x7 << kDslFramerExtraByteShift)
++
++typedef struct _dslFramerControl {
++ bitMap setup;
++ dslFrameHandlerType rxIndicateHandlerPtr;
++ dslFrameHandlerType txCompleteHandlerPtr;
++ dslStatusHandlerType statusHandlerPtr;
++ ulong statusCode;
++ ulong statusOffset;
++
++ int nRxBuffers;
++ int nRxBufSize;
++ int nRxPackets;
++
++ dslFrame *freeBufListPtr;
++ void *freeBufPool;
++ void *pBufMemory;
++
++ dslFrame *freePacketListPtr;
++ void *freePacketPool;
++
++ /* RX working data set */
++
++ dslFrame *pRxFrame;
++ dslFrameBuffer *pRxBuf;
++ uchar *pRxBufData;
++ uchar *pRxBufDataEnd;
++ int rxFrameLen;
++
++ /* TX working data set */
++
++ DListHeader dlistTxWaiting;
++ dslFrame *pTxFrame;
++ dslFrameBuffer *pTxBuf;
++ uchar *pTxBufData;
++ uchar *pTxBufDataEnd;
++
++ /* stats data */
++
++ ulong dslByteCntRxTotal;
++ ulong dslByteCntTxTotal;
++
++ ulong dslFrameCntRxTotal;
++ ulong dslFrameCntRxErr;
++ ulong dslFrameCntTxTotal;
++
++} dslFramerControl;
++
++
++extern Boolean DslFramerInit(
++ void *gDslVars,
++ dslFramerControl *dfCtrl,
++ bitMap setup,
++ ulong statusCode,
++ ulong statusOffset,
++ dslFrameHandlerType rxIndicateHandlerPtr,
++ dslFrameHandlerType txCompleteHandlerPtr,
++ dslStatusHandlerType statusHandlerPtr,
++ ulong rxBufNum,
++ ulong rxBufSize,
++ ulong rxPacketNum);
++extern void DslFramerClose(void *gDslVars, dslFramerControl *dfCtrl);
++extern void DslFramerSendFrame(void *gDslVars, dslFramerControl *dfCtrl, dslFrame *pFrame);
++extern void DslFramerReturnFrame(void *gDslVars, dslFramerControl *dfCtrl, dslFrame *pFrame);
++
++
++extern Boolean DslFramerRxGetPtr(void *gDslVars, dslFramerControl *dfCtrl, dslFramerBufDesc *pBufDesc);
++extern void DslFramerRxDone (void *gDslVars, dslFramerControl *dfCtrl, dslFramerBufDesc *pBufDesc);
++extern Boolean DslFramerTxGetPtr(void *gDslVars, dslFramerControl *dfCtrl, dslFramerBufDesc *pBufDesc);
++extern void DslFramerTxDone(void *gDslVars, dslFramerControl *dfCtrl, dslFramerBufDesc *pBufDesc);
++extern Boolean DslFramerTxIdle (void *gDslVars, dslFramerControl *dfCtrl);
++extern void DslFramerTxFlush(void *gDslVars, dslFramerControl *dfCtrl);
++
++extern void * DslFramerGetFramePoolHandler(dslFramerControl *dfCtrl);
++extern void DslFramerClearStat(dslFramerControl *dfCtrl);
++
++extern void DslFramerRxFlushFrame (void *gDslVars, dslFramerControl *dfCtrl, int errCode);
++extern void DslFramerRxFlush(void *gDslVars, dslFramerControl *dfCtrl);
++
++#endif /* DslFramerHeader */
+diff -urN linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/Flatten.h linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/Flatten.h
+--- linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/Flatten.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/Flatten.h 2006-06-26 09:07:10.000000000 +0200
+@@ -0,0 +1,115 @@
++/*
++<:copyright-broadcom
++
++ Copyright (c) 2002 Broadcom Corporation
++ All Rights Reserved
++ No portions of this material may be reproduced in any form without the
++ written permission of:
++ Broadcom Corporation
++ 16215 Alton Parkway
++ Irvine, California 92619
++ All information contained in this document is Broadcom Corporation
++ company private, proprietary, and trade secret.
++
++:>
++*/
++/****************************************************************************
++ *
++ * Flatten.h -- Header for Flatten/Unflatten command/status
++ *
++ * Copyright (c) 1998 AltoCom, Inc. All rights reserved.
++ * Authors: Ilya Stomakhin
++ *
++ * $Revision: 1.14 $
++ *
++ * $Id: Flatten.h,v 1.14 2004/03/04 19:48:52 linyin Exp $
++ *
++ * $Log: Flatten.h,v $
++ * Revision 1.14 2004/03/04 19:48:52 linyin
++ * Support adsl2plus
++ *
++ * Revision 1.13 2003/10/17 22:45:14 yongbing
++ * Increase buffer size for large B&G table of G992P3
++ *
++ * Revision 1.12 2003/08/12 23:16:26 khp
++ * - for Haixiang: added support for ADSL_MARGIN_TWEAK_TEST
++ *
++ * Revision 1.11 2003/02/27 06:33:03 ilyas
++ * Improved free space checking in command buffer (became a problem with
++ * 2 commands SetXmtgain and StartPhy)
++ *
++ * Revision 1.10 2003/01/11 01:27:07 ilyas
++ * Improved checking for available space in status buffer
++ *
++ * Revision 1.9 2002/09/07 01:43:59 ilyas
++ * Added support for OEM parameters
++ *
++ * Revision 1.8 2002/05/16 00:01:52 khp
++ * -added missing #endif
++ *
++ * Revision 1.7 2002/05/15 00:04:48 mprahlad
++ * increase the status buffer size - prevent memory overflow for annexC cases
++ *
++ * Revision 1.6 2002/04/05 04:10:33 linyin
++ * -hack to fit in Annex C firmware in LMEM
++ *
++ * Revision 1.5 2002/04/05 02:45:25 linyin
++ * Make the buffer side larger for annexC
++ *
++ * Revision 1.4 2002/01/30 07:19:06 ilyas
++ * Moved showtime code to LMEM
++ *
++ * Revision 1.3 2001/08/29 02:56:01 ilyas
++ * Added tests for flattening/unflatenning command and statuses (dual mode)
++ *
++ * Revision 1.2 2001/04/25 00:30:54 ilyas
++ * Adjusted MaxFrameLen
++ *
++ * Revision 1.1 2001/04/24 21:41:21 ilyas
++ * Implemented status flattening/unflattaning to transfer statuses between
++ * modules asynchronously through the circular buffer
++ *
++ *
++ *****************************************************************************/
++
++#ifndef _Flatten_H_
++#define _Flatten_H_
++
++#include "CircBuf.h"
++
++#ifdef ADSL_MARGIN_TWEAK_TEST
++#define kMaxFlattenedCommandSize 272 /* maximum no. of bytes in flattened cmd */
++#else
++#define kMaxFlattenedCommandSize 128 /* maximum no. of bytes in flattened cmd */
++#endif
++#if defined(G992_ANNEXC) || defined(G992P3)
++#if defined(G992P5)
++#define kMaxFlattenedStatusSize 2200 /* maximum no. of bytes in flattened status */
++#else
++#define kMaxFlattenedStatusSize 1100 /* maximum no. of bytes in flattened status */
++#endif
++#else
++#define kMaxFlattenedStatusSize 550 /* maximum no. of bytes in flattened status */
++#endif
++
++#define kMaxFlattenFramelength (kMaxFlattenedStatusSize - (4*sizeof(long)) - 20)
++
++extern int SM_DECL FlattenCommand (dslCommandStruct *cmd, ulong *dstPtr, ulong nAvail);
++extern int SM_DECL UnflattenCommand(ulong *srcPtr, dslCommandStruct *cmd);
++extern int SM_DECL FlattenStatus (dslStatusStruct *status, ulong *dstPtr, ulong nAvail);
++extern int SM_DECL UnflattenStatus (ulong *srcPtr, dslStatusStruct *status);
++
++#define FlattenBufferInit(fb,fbData,bufSize,itemSize) \
++ StretchBufferInit(fb, fbData, bufSize, itemSize)
++
++extern int SM_DECL FlattenBufferStatusWrite(stretchBufferStruct *fBuf, dslStatusStruct *status);
++extern int SM_DECL FlattenBufferStatusRead(stretchBufferStruct *fBuf, dslStatusStruct *status);
++
++extern int SM_DECL FlattenBufferCommandWrite(stretchBufferStruct *fBuf, dslCommandStruct *cmd);
++extern int SM_DECL FlattenBufferCommandRead(stretchBufferStruct *fBuf, dslCommandStruct *cmd);
++
++#define FlattenBufferReadComplete(fb,nBytes) \
++ StretchBufferReadUpdate (fb, nBytes)
++
++#endif /* _Flatten_H_ */
++
+diff -urN linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/G992p3OvhMsg.gh linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/G992p3OvhMsg.gh
+--- linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/G992p3OvhMsg.gh 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/G992p3OvhMsg.gh 2006-06-26 09:07:10.000000000 +0200
+@@ -0,0 +1,110 @@
++/*
++<:copyright-broadcom
++
++ Copyright (c) 2002 Broadcom Corporation
++ All Rights Reserved
++ No portions of this material may be reproduced in any form without the
++ written permission of:
++ Broadcom Corporation
++ 16215 Alton Parkway
++ Irvine, California 92619
++ All information contained in this document is Broadcom Corporation
++ company private, proprietary, and trade secret.
++
++:>
++*/
++/****************************************************************************
++ *
++ * G992p3OvhMsg.gh
++ *
++ * Description:
++ * This is a header file which defines the type for the G992p3 overhead
++ * channel messages global variable structure.
++ *
++ *
++ * Copyright (c) 1999-2003 BroadCom, Inc. All rights reserved.
++ * Authors: Ilya Stomakhin
++ *
++ * $Revision: 1.5 $
++ *
++ * $Id: G992p3OvhMsg.gh,v 1.5 2004/09/11 03:52:25 ilyas Exp $
++ *
++ * $Log: G992p3OvhMsg.gh,v $
++ * Revision 1.5 2004/09/11 03:52:25 ilyas
++ * Added support for overhead message segmentation
++ *
++ * Revision 1.4 2004/07/07 01:27:20 ilyas
++ * Fixed OHC message stuck problem on L2 entry/exit
++ *
++ * Revision 1.3 2004/06/10 00:13:31 ilyas
++ * Added L2/L3 and SRA
++ *
++ * Revision 1.2 2004/04/12 23:34:52 ilyas
++ * Merged the latest ADSL driver chnages for ADSL2+
++ *
++ * Revision 1.1 2003/07/18 19:39:18 ilyas
++ * Initial G.992.3 overhead channel message implementation (from ADSL driver)
++ *
++ *
++ *****************************************************************************/
++
++#ifndef G992p3OvhMsgFramerGlobals
++#define G992p3OvhMsgFramerGlobals
++
++#define kG992p3OvhMsgMaxCmdSize (16 + 16)
++#define kG992p3OvhMsgMaxRspSize (16 + 2*512)
++
++typedef struct
++ {
++ dslFrame *segFrame;
++ dslFrameBuffer *segFrBufCur;
++ dslFrameBuffer segFrBuf;
++ ulong timeSegOut;
++ uchar tryCnt;
++ uchar segTotal;
++ uchar segId;
++ }
++ g992p3SegFrameCtlStruct;
++
++typedef struct
++ {
++ bitMap setup;
++ dslFrameHandlerType rxReturnFramePtr;
++ dslFrameHandlerType txSendFramePtr;
++ dslCommandHandlerType cmdHandlerPtr;
++ dslStatusHandlerType statusHandlerPtr;
++
++ dslFrame txRspFrame;
++ dslFrameBuffer txRspFrBuf;
++ dslFrameBuffer txRspFrBuf1;
++ uchar txRspBuf[kG992p3OvhMsgMaxRspSize];
++ dslFrame txPwrRspFrame;
++ dslFrameBuffer txPwrRspFrBuf0;
++ dslFrameBuffer txPwrRspFrBuf0a;
++ dslFrameBuffer txPwrRspFrBuf1;
++ uchar txPwrRspBuf0[8];
++ dslFrame txCmdFrame;
++ dslFrameBuffer txCmdFrBuf0;
++ dslFrameBuffer txCmdFrBuf0a;
++ dslFrameBuffer txCmdFrBuf1;
++ uchar txCmdBuf[kG992p3OvhMsgMaxCmdSize];
++ g992p3SegFrameCtlStruct txSegFrameCtl;
++ ulong txFlags;
++ uchar txL0Rq;
++ uchar txL3Rq;
++
++ ulong timeMs;
++ ulong timeCmdOut;
++ ulong cmdTryCnt;
++ ulong cmdNum;
++ ulong timeRspOut;
++ uchar *txPmdCmd;
++
++ uchar rxCmdMsgNum;
++ uchar rxRspMsgNum;
++ uchar txCmdMsgNum;
++ uchar txRspMsgNum;
++ }
++ g992p3OvhMsgVarsStruct;
++
++#endif /* G992p3OvhMsgFramerGlobals */
+diff -urN linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/G992p3OvhMsg.h linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/G992p3OvhMsg.h
+--- linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/G992p3OvhMsg.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/G992p3OvhMsg.h 2006-06-26 09:07:10.000000000 +0200
+@@ -0,0 +1,64 @@
++/*
++<:copyright-broadcom
++
++ Copyright (c) 2002 Broadcom Corporation
++ All Rights Reserved
++ No portions of this material may be reproduced in any form without the
++ written permission of:
++ Broadcom Corporation
++ 16215 Alton Parkway
++ Irvine, California 92619
++ All information contained in this document is Broadcom Corporation
++ company private, proprietary, and trade secret.
++
++:>
++*/
++/****************************************************************************
++ *
++ * G992p3OvhMsg.h
++ *
++ * Description:
++ * This file contains the exported functions and definitions for G992p3
++ * overhead channel messages
++ *
++ *
++ * Copyright (c) 1999-2003 BroadCom, Inc. All rights reserved.
++ * Authors: Ilya Stomakhin
++ *
++ * $Revision: 1.1 $
++ *
++ * $Id: G992p3OvhMsg.h,v 1.1 2003/07/18 19:39:18 ilyas Exp $
++ *
++ * $Log: G992p3OvhMsg.h,v $
++ * Revision 1.1 2003/07/18 19:39:18 ilyas
++ * Initial G.992.3 overhead channel message implementation (from ADSL driver)
++ *
++ *
++ *****************************************************************************/
++
++#ifndef G992p3OvhMsgFramerHeader
++#define G992p3OvhMsgFramerHeader
++
++#define kG992p3OvhMsgFrameBufCnt -1
++
++extern Boolean G992p3OvhMsgInit(
++ void *gDslVars,
++ bitMap setup,
++ dslFrameHandlerType rxReturnFramePtr,
++ dslFrameHandlerType txSendFramePtr,
++ dslCommandHandlerType commandHandler,
++ dslStatusHandlerType statusHandler);
++
++extern void G992p3OvhMsgReset(void *gDslVars);
++extern void G992p3OvhMsgClose(void *gDslVars);
++extern void G992p3OvhMsgTimer(void *gDslVars, long timeQ24ms);
++extern Boolean G992p3OvhMsgCommandHandler (void *gDslVars, dslCommandStruct *cmd);
++extern void G992p3OvhMsgStatusSnooper (void *gDslVars, dslStatusStruct *status);
++
++extern int G992p3OvhMsgSendCompleteFrame(void *gDslVars, void *pVc, ulong mid, dslFrame *pFrame);
++extern int G992p3OvhMsgIndicateRcvFrame(void *gDslVars, void *pVc, ulong mid, dslFrame *pFrame);
++
++extern void G992p3OvhMsgSetL3(void *gDslVars);
++extern void G992p3OvhMsgSetL0(void *gDslVars);
++
++#endif /* G992p3OvhMsgFramerHeader */
+diff -urN linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/G997.gh linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/G997.gh
+--- linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/G997.gh 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/G997.gh 2006-06-26 09:07:10.000000000 +0200
+@@ -0,0 +1,66 @@
++/****************************************************************************
++ *
++ * G997.gh
++ *
++ * Description:
++ * This is a header file which defines the type for the G997 Framer
++ * global variable structure.
++ *
++ *
++ * Copyright (c) 1993-1998 AltoCom, Inc. All rights reserved.
++ * Authors: Ilya Stomakhin
++ *
++ * $Revision: 1.5 $
++ *
++ * $Id: G997.gh,v 1.5 2004/07/21 01:39:41 ilyas Exp $
++ *
++ * $Log: G997.gh,v $
++ * Revision 1.5 2004/07/21 01:39:41 ilyas
++ * Reset entire G.997 state on retrain. Timeout in G.997 if no ACK
++ *
++ * Revision 1.4 2004/04/27 00:27:16 ilyas
++ * Implemented double buffering to ensure G.997 HDLC frame is continuous
++ *
++ * Revision 1.3 2003/07/18 18:56:59 ilyas
++ * Added support for shared TX buffer (for ADSL driver)
++ *
++ * Revision 1.2 2002/01/11 06:48:27 ilyas
++ * Added command handler pointer
++ *
++ * Revision 1.1 2001/12/13 02:28:27 ilyas
++ * Added common framer (DslPacket and G997) and G997 module
++ *
++ *
++ *****************************************************************************/
++
++#ifndef G997FramerGlobals
++#define G997FramerGlobals
++
++#include "DslFramer.h"
++#include "HdlcFramer.h"
++
++#define kG997MsgBufSize 64
++
++typedef struct
++ {
++ bitMap setup;
++ dslFramerControl dslFramer;
++ hdlcByteControl hdlcByte;
++ dslCommandHandlerType commandHandler;
++
++ ulong timeMs;
++ ulong timeCmdOut;
++
++ uchar rxMsgNum;
++ uchar txMsgNum;
++ Boolean txIdle;
++ uchar txMsgBuf[kG997MsgBufSize];
++ ulong txMsgBufLen;
++ uchar *txMsgBufPtr;
++ ulong txMsgLen;
++ ulong txMsgBufs;
++ ulong txMsgBufNum;
++ }
++ g997VarsStruct;
++
++#endif /* G997FramerGlobals */
+diff -urN linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/G997.h linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/G997.h
+--- linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/G997.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/G997.h 2006-06-26 09:07:10.000000000 +0200
+@@ -0,0 +1,68 @@
++/*
++<:copyright-broadcom
++
++ Copyright (c) 2002 Broadcom Corporation
++ All Rights Reserved
++ No portions of this material may be reproduced in any form without the
++ written permission of:
++ Broadcom Corporation
++ 16215 Alton Parkway
++ Irvine, California 92619
++ All information contained in this document is Broadcom Corporation
++ company private, proprietary, and trade secret.
++
++:>
++*/
++/****************************************************************************
++ *
++ * G997.h
++ *
++ * Description:
++ * This file contains the exported functions and definitions for G97Framer
++ *
++ *
++ * Copyright (c) 1993-1998 AltoCom, Inc. All rights reserved.
++ * Authors: Ilya Stomakhin
++ *
++ * $Revision: 1.3 $
++ *
++ * $Id: G997.h,v 1.3 2003/07/18 18:56:59 ilyas Exp $
++ *
++ * $Log: G997.h,v $
++ * Revision 1.3 2003/07/18 18:56:59 ilyas
++ * Added support for shared TX buffer (for ADSL driver)
++ *
++ * Revision 1.2 2002/07/20 00:51:41 ilyas
++ * Merged witchanges made for VxWorks/Linux driver.
++ *
++ * Revision 1.1 2001/12/13 02:28:27 ilyas
++ * Added common framer (DslPacket and G997) and G997 module
++ *
++ *
++ *
++ *****************************************************************************/
++
++#ifndef G997FramerHeader
++#define G997FramerHeader
++
++extern Boolean G997Init(
++ void *gDslVars,
++ bitMap setup,
++ ulong rxBufNum,
++ ulong rxBufSize,
++ ulong rxPacketNum,
++ upperLayerFunctions *pUpperLayerFunctions,
++ dslCommandHandlerType g997PhyCommandHandler);
++
++extern void G997Close(void *gDslVars);
++extern void G997Timer(void *gDslVars, long timeQ24ms);
++extern Boolean G997CommandHandler (void *gDslVars, dslCommandStruct *cmd);
++extern void G997StatusSnooper (void *gDslVars, dslStatusStruct *status);
++
++extern int G997SendFrame(void *gDslVars, void *pVc, ulong mid, dslFrame *pFrame);
++extern int G997ReturnFrame(void *gDslVars, void *pVc, ulong mid, dslFrame *pFrame);
++
++extern Boolean G997SetTxBuffer(void *gDslVars, ulong len, void *bufPtr);
++extern void * G997GetFramePoolHandler(void *gDslVars);
++
++#endif /* G997FramerHeader */
+diff -urN linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/HdlcFramer.h linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/HdlcFramer.h
+--- linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/HdlcFramer.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/HdlcFramer.h 2006-06-26 09:07:10.000000000 +0200
+@@ -0,0 +1,237 @@
++/*
++<:copyright-broadcom
++
++ Copyright (c) 2002 Broadcom Corporation
++ All Rights Reserved
++ No portions of this material may be reproduced in any form without the
++ written permission of:
++ Broadcom Corporation
++ 16215 Alton Parkway
++ Irvine, California 92619
++ All information contained in this document is Broadcom Corporation
++ company private, proprietary, and trade secret.
++
++:>
++*/
++/****************************************************************************
++ *
++ * HdlcFramer.h
++ *
++ * Description:
++ * This file contains common HDLC definitions for bit/byte stuffing
++ *
++ *
++ * Copyright (c) 1993-1998 AltoCom, Inc. All rights reserved.
++ * Authors: Ilya Stomakhin
++ *
++ * $Revision: 1.3 $
++ *
++ * $Id: HdlcFramer.h,v 1.3 2004/07/21 01:39:41 ilyas Exp $
++ *
++ * $Log: HdlcFramer.h,v $
++ * Revision 1.3 2004/07/21 01:39:41 ilyas
++ * Reset entire G.997 state on retrain. Timeout in G.997 if no ACK
++ *
++ * Revision 1.2 2003/07/18 18:51:05 ilyas
++ * Added mode (default) to pass address and control field
++ *
++ * Revision 1.1 2001/12/13 02:28:27 ilyas
++ * Added common framer (DslPacket and G997) and G997 module
++ *
++ *
++ *
++ *****************************************************************************/
++
++#ifndef HdlcFramerHeader
++#define HdlcFramerHeader
++
++/* setup bitmap definitions */
++
++#define kHdlcSetupShift 16
++#define kHdlcSetupMask ((long)0xFFFF << kHdlcSetupShift)
++
++#define kHdlcCrcMask 0x00030000
++#define kHdlcCrcNone 0x00000000
++#define kHdlcCrc16 0x00010000
++#define kHdlcCrc32 0x00020000
++
++#define kHdlcTxIdleStop 0x00040000
++#define kHdlcSpecialAddrCtrl 0x00080000
++
++extern ushort HdlcCrc16Table[];
++
++#define HDLC16_CRC_INIT 0xFFFF
++#define HDLC16_CRC_FINAL(crc) ((crc) ^ 0xFFFF)
++#define HDLC16_GOOD_CRC 0xF0B8
++#define Hdlc16UpdateCrc(crc,b) ((crc) >> 8) ^ HdlcCrc16Table[((crc) ^ (b)) & 0xFF]
++
++extern ulong HdlcCrc32Table[];
++
++#define HDLC32_CRC_INIT 0xFFFFFFFF
++#define HDLC32_CRC_FINAL(crc) ((crc) ^ 0xFFFFFFFF)
++#define HDLC32_GOOD_CRC 0xDEBB20E3
++#define Hdlc32UpdateCrc(crc,b) ((crc) >> 8) ^ HdlcCrc32Table[((crc) ^ (b)) & 0xFF]
++
++extern ulong HdlcCrc32Table[];
++
++/* HDLC common fields */
++
++#define HDLC_ADDR 0xFF
++#define HDLC_CTRL 0x3
++
++#define HDLC_BYTE_FLAG 0x7E
++#define HDLC_BYTE_ESC 0x7D
++
++/* HDLC frame assembly states */
++
++#define HDLC_STATE_START_FLAG 0
++#define HDLC_STATE_ADDRESS (HDLC_STATE_START_FLAG + 1)
++#define HDLC_STATE_CONTROL (HDLC_STATE_START_FLAG + 2)
++#define HDLC_STATE_DATA (HDLC_STATE_START_FLAG + 3)
++#define HDLC_STATE_FCS1 (HDLC_STATE_START_FLAG + 4)
++#define HDLC_STATE_FCS2 (HDLC_STATE_START_FLAG + 5)
++#define HDLC_STATE_END_FLAG (HDLC_STATE_START_FLAG + 6)
++
++
++/* HDLC common types */
++
++typedef struct _hdlcByteControl {
++ bitMap setup;
++ dslFramerDataGetPtrHandlerType rxDataGetPtrHandler;
++ dslFramerDataDoneHandlerType rxDataDoneHandler;
++ dslFramerDataGetPtrHandlerType txDataGetPtrHandler;
++ dslFramerDataDoneHandlerType txDataDoneHandler;
++
++ /* RX working data set */
++
++ uchar rxFrameState;
++ int rxFrameLen;
++ ulong rxCrc;
++ Boolean rxEscChar;
++
++ uchar *pRxData;
++ uchar *pRxDataEnd;
++ long rxDataLen;
++
++ /* TX working data set */
++
++ uchar txFrameState;
++ int txFrameLen;
++ ulong txCrc;
++ int txCharPending;
++
++ uchar *pTxData;
++ uchar *pTxDataEnd;
++ long txDataLen;
++} hdlcByteControl;
++
++typedef struct _hdlcBitControl {
++ bitMap setup;
++ dslFramerDataGetPtrHandlerType rxDataGetPtrHandler;
++ dslFramerDataDoneHandlerType rxDataDoneHandler;
++ dslFramerDataGetPtrHandlerType txDataGetPtrHandler;
++ dslFramerDataDoneHandlerType txDataDoneHandler;
++
++ /* RX working data set */
++
++ uchar rxFrameState;
++ int rxFrameLen;
++ ulong rxCrc;
++ int rxNibblePending;
++ int rxOutVal;
++ uchar rxOutBits;
++ uchar rxRem1Bits;
++ Boolean rxEscChar; /* ???? */
++
++ uchar *pRxData;
++ uchar *pRxDataEnd;
++ long rxDataLen;
++
++ /* TX working data set */
++
++ uchar txFrameState;
++ int txFrameLen;
++ ulong txCrc;
++ int txOutVal;
++ uchar txOutBits;
++ uchar txLast1Bits;
++ int txCharPending; /* ???? */
++
++ uchar *pTxData;
++ uchar *pTxDataEnd;
++ long txDataLen;
++} hdlcBitControl;
++
++/* HDLC common functions */
++
++#define HdlcFramerTxFrameInit(ctrl) do { \
++ ctrl->txFrameState = HDLC_STATE_START_FLAG; \
++ ctrl->txFrameLen = 0; \
++ ctrl->txCrc = HDLC16_CRC_INIT; \
++ ctrl->txCharPending= -1; \
++} while (0)
++
++#define HdlcFramerRxFrameInit(ctrl) do { \
++ ctrl->rxFrameState = HDLC_STATE_START_FLAG; \
++ ctrl->rxFrameLen = 0; \
++ ctrl->rxCrc = HDLC16_CRC_INIT; \
++ ctrl->rxEscChar = false; \
++} while (0)
++
++#define HdlcFramerTxGetData(ctrl) do { \
++ dslFramerBufDesc bufDesc; \
++ \
++ if ((ctrl->txDataGetPtrHandler) (gDslVars, &bufDesc)) { \
++ ctrl->pTxData = bufDesc.bufPtr; \
++ ctrl->pTxDataEnd = (uchar*)bufDesc.bufPtr + bufDesc.bufLen; \
++ ctrl->txDataLen = bufDesc.bufLen; \
++ if (bufDesc.bufFlags & kDslFramerStartNewFrame) \
++ HdlcFramerTxFrameInit(ctrl); \
++ } \
++ else { \
++ HdlcFramerTxFrameInit(ctrl); \
++ } \
++} while (0);
++
++#define HdlcFramerRxGetData(ctrl, frFlag) do { \
++ dslFramerBufDesc bufDesc; \
++ \
++ bufDesc.bufFlags = frFlag; \
++ if ((ctrl->rxDataGetPtrHandler) (gDslVars, &bufDesc)) { \
++ ctrl->pRxData = bufDesc.bufPtr; \
++ ctrl->pRxDataEnd = (uchar*)bufDesc.bufPtr + bufDesc.bufLen; \
++ ctrl->rxDataLen = bufDesc.bufLen; \
++ } \
++} while (0);
++
++/* HDLC functions headers */
++
++extern Boolean HdlcByteInit(
++ void *gDslVars,
++ hdlcByteControl *hbyCtrl,
++ bitMap setup,
++ dslFramerDataGetPtrHandlerType rxDataGetPtrHandler,
++ dslFramerDataDoneHandlerType rxDataDoneHandler,
++ dslFramerDataGetPtrHandlerType txDataGetPtrHandler,
++ dslFramerDataDoneHandlerType txDataDoneHandler);
++
++extern void HdlcByteReset(void *gDslVars, hdlcByteControl *hbyCtrl);
++extern void HdlcByteRxFlush(void *gDslVars, hdlcByteControl *hbyCtrl);
++extern int HdlcByteRx(void *gDslVars, hdlcByteControl *hbyCtrl, int nBytes, uchar *srcPtr) FAST_TEXT;
++extern int HdlcByteTx(void *gDslVars, hdlcByteControl *hbyCtrl, int nBytes, uchar *dstPtr) FAST_TEXT;
++extern Boolean HdlcByteTxIdle(void *gDslVars, hdlcByteControl *hbyCtrl);
++
++extern Boolean HdlcBitInit(
++ void *gDslVars,
++ hdlcBitControl *hbiCtrl,
++ bitMap setup,
++ dslFramerDataGetPtrHandlerType rxDataGetPtrHandler,
++ dslFramerDataDoneHandlerType rxDataDoneHandler,
++ dslFramerDataGetPtrHandlerType txDataGetPtrHandler,
++ dslFramerDataDoneHandlerType txDataDoneHandler);
++
++extern void HdlcBitReset(void *gDslVars, hdlcByteControl *hbiCtrl);
++extern int HdlcBitRx(void *gDslVars, hdlcBitControl *hbiCtrl, int nBytes, uchar *srcPtr) FAST_TEXT;
++extern int HdlcBitTx(void *gDslVars, hdlcBitControl *hbiCtrl, int nBytes, uchar *dstPtr) FAST_TEXT;
++
++#endif /* HdlcFramerHeader */
+diff -urN linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/MathUtil.h linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/MathUtil.h
+--- linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/MathUtil.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/MathUtil.h 2006-06-26 09:07:10.000000000 +0200
+@@ -0,0 +1,135 @@
++/*
++<:copyright-broadcom
++
++ Copyright (c) 2002 Broadcom Corporation
++ All Rights Reserved
++ No portions of this material may be reproduced in any form without the
++ written permission of:
++ Broadcom Corporation
++ 16215 Alton Parkway
++ Irvine, California 92619
++ All information contained in this document is Broadcom Corporation
++ company private, proprietary, and trade secret.
++
++:>
++*/
++/************************************************************************
++ *
++ * MathUtil.h:
++ *
++ * Description:
++ * This file contains the exported interface for MathUtil.c module.
++ *
++ *
++ * Copyright (c) 1993-1997 AltoCom, Inc. All rights reserved.
++ * Authors: Mark Gonikberg, Haixiang Liang.
++ *
++ * $Revision: 1.6 $
++ *
++ * $Id: MathUtil.h,v 1.6 2004/04/13 00:21:13 ilyas Exp $
++ *
++ * $Log: MathUtil.h,v $
++ * Revision 1.6 2004/04/13 00:21:13 ilyas
++ * Added standard header for shared ADSL driver files
++ *
++ * Revision 1.5 2001/08/16 02:18:08 khp
++ * - mark functions with FAST_TEXT to reduce cycle counts for QPROC targets
++ * (replaces use of LMEM_INSN)
++ *
++ * Revision 1.4 1999/10/06 04:55:22 liang
++ * Added function to multiply two long values to save result as VeryLong.
++ *
++ * Revision 1.3 1999/08/05 19:42:52 liang
++ * Merged with the softmodem top of the tree on 08/04/99 for assembly files.
++ *
++ * Revision 1.2 1999/03/26 03:29:59 liang
++ * Export CosSin table.
++ *
++ * Revision 1.1 1998/10/28 01:28:07 liang
++ * *** empty log message ***
++ *
++ * Revision 1.12 1998/02/10 17:19:49 scott
++ * Changed MathVL routines to return arguments using pointers
++ *
++ * Revision 1.11 1997/12/13 06:12:07 mwg
++ * Added more Atan2 flavors
++ *
++ * Revision 1.10 1997/11/18 01:11:48 mwg
++ * Removed <CR> symbols which accidently slipped in.
++ *
++ * Revision 1.9 1997/11/03 19:07:52 scott
++ * No longer redefine max() and min() if already defined
++ *
++ * Revision 1.8 1997/07/30 01:35:20 liang
++ * Add more accurate atan2 function UtilLongLongAtan2.
++ *
++ * Revision 1.7 1997/07/21 20:23:19 mwg
++ * Added new function: UtilBlockCos()
++ *
++ * Revision 1.6 1997/03/21 23:50:10 liang
++ * Added initial version of V8bis module to CVS tree.
++ *
++ * Revision 1.5 1997/03/19 18:35:34 mwg
++ * Changed copyright notice.
++ *
++ * Revision 1.4 1997/01/21 00:36:15 mwg
++ * Added new function: UtilBlockCosSin()
++ *
++ * Revision 1.3 1996/06/18 21:14:45 mwg
++ * Modified VLDivVL by allowing to specify the result scaling.
++ *
++ * Revision 1.2 1996/06/12 02:31:59 mwg
++ * Added 64bit arithmetic functions.
++ *
++ * Revision 1.1.1.1 1996/02/14 02:35:15 mwg
++ * Redesigned the project directory structure. Merged V.34 into the project.
++ *
++ * Revision 1.4 1995/12/04 23:08:15 liang
++ * Add file Math/LinearToLog.c.
++ *
++ ************************************************************************/
++#ifndef MathUtilPh
++#define MathUtilPh
++
++/* Exported tables */
++extern const short UtilCosTable[];
++
++/* Exported functions */
++extern ComplexShort UtilCosSin(ushort angle);
++extern long UtilBlockCosSin (int nValues, long angle, long delta, ComplexShort *dstPtr);
++extern long UtilBlockCos (int nValues, long angle, long delta, short *dstPtr);
++extern ushort UtilShortShortAtan2(ComplexShort point);
++extern ushort UtilLongShortAtan2(ComplexLong point);
++extern ulong UtilShortLongAtan2(ComplexShort point) FAST_TEXT;
++extern ulong UtilLongLongAtan2(ComplexLong point) FAST_TEXT;
++extern ushort UtilSqrt(ulong y);
++extern ushort UtilMaxMagnitude(int blkSize, ComplexShort *dataPtr);
++extern short UtilQ0LinearToQ4dB (ulong x);
++extern ulong UtilQ4dBToQ12Linear (short x);
++extern void UtilAdjustComplexMagnitude(ComplexShort *srcPtr, short mag, short adjustment);
++
++extern void VLMultLongByLong(long x, long y, VeryLong *dst);
++extern void VLMultShort (VeryLong x, short y, VeryLong *dst);
++extern void VLAddVL (VeryLong x, VeryLong y, VeryLong *dst);
++extern void VLAddLong (VeryLong x, long y, VeryLong *dst);
++extern void VLSubVL (VeryLong x, VeryLong y, VeryLong *dst);
++extern void VLSubLong (VeryLong x, long y, VeryLong *dst);
++extern void VLDivVL (VeryLong x, VeryLong y, int scale, long *dst);
++extern void VLShiftLeft(VeryLong x, int shift, VeryLong *dst);
++extern void VLShiftRight(VeryLong x, int shift, VeryLong *dst);
++
++
++#define UtilAtan2 UtilShortShortAtan2
++#define UtilLongAtan2 UtilLongShortAtan2
++
++/* Standard Macros */
++#undef abs
++#define abs(x) ((x) >= 0 ? (x) : -(x))
++
++#undef max
++#define max(x, y) ((x) >= (y) ? (x) : (y))
++
++#undef min
++#define min(x, y) ((x) <= (y) ? (x) : (y))
++
++#endif /* MathUtilPh */
+diff -urN linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/MipsAsm.h linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/MipsAsm.h
+--- linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/MipsAsm.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/MipsAsm.h 2006-06-26 09:07:10.000000000 +0200
+@@ -0,0 +1,264 @@
++/*
++<:copyright-broadcom
++
++ Copyright (c) 2002 Broadcom Corporation
++ All Rights Reserved
++ No portions of this material may be reproduced in any form without the
++ written permission of:
++ Broadcom Corporation
++ 16215 Alton Parkway
++ Irvine, California 92619
++ All information contained in this document is Broadcom Corporation
++ company private, proprietary, and trade secret.
++
++:>
++*/
++/************************************************************************
++ *
++ * MipsAsm.h:
++ *
++ * Description:
++ * This file contains definitions specific to MIPS assembly
++ *
++ *
++ * Copyright (c) 1993-1997 AltoCom, Inc. All rights reserved.
++ * Authors: Mark Gonikberg, Haixiang Liang.
++ *
++ * $Revision: 1.5 $
++ *
++ * $Id: MipsAsm.h,v 1.5 2004/04/13 00:16:59 ilyas Exp $
++ *
++ * $Log: MipsAsm.h,v $
++ * Revision 1.5 2004/04/13 00:16:59 ilyas
++ * Merged the latest ADSL driver changes
++ *
++ * Revision 1.4 2002/09/12 04:08:50 ilyas
++ * Added macros for BCM MIPS specific instructions
++ *
++ * Revision 1.3 2000/11/18 21:28:19 mprahlad
++ * ifdef bcm47xx -
++ * define MSUB(src1,src2) msub src1, src2
++ * change Mult(dst, src1, src2) to use "mul" instead of "mult; mflo"
++ * define Mul(src1, src2) mult src1, src2
++ *
++ * Revision 1.2 2000/07/28 21:05:05 mprahlad
++ * Macros specific to bcm47xx added.
++ *
++ * Revision 1.1 1999/08/05 19:52:57 liang
++ * Copied from the softmodem top of the tree on 08/04/99.
++ *
++ * Revision 1.5 1999/04/02 23:16:21 mwg
++ * Fixed a minor comatibility issue with mult
++ *
++ * Revision 1.4 1999/02/03 20:25:43 mwg
++ * Added an option for R4010
++ *
++ * Revision 1.3 1998/10/30 02:21:34 mwg
++ * Added targets for 4640
++ *
++ * Revision 1.2 1998/10/16 18:52:09 ilyas
++ * Added ASM_PROLOG[5-7] macros to save on stores
++ *
++ * Revision 1.1 1998/06/03 23:28:39 mwg
++ * Renamed from DinoDefs.h
++ *
++ * Revision 1.6 1998/02/09 18:23:11 scott
++ * Added EMBEDDED_CALLING_CONVENTION (GreenHill) and R3900/R4102
++ *
++ * Revision 1.5 1997/03/19 18:35:02 mwg
++ * Changed copyright notice.
++ *
++ * Revision 1.4 1996/10/02 20:28:41 liang
++ * Remove parameter "acc" from the non-DINO version of MAD.
++ *
++ * Revision 1.3 1996/10/02 19:44:36 liang
++ * Separated MultAdd into MAD and MADW, added NO_DINO_WRITEBACK option.
++ *
++ * Revision 1.2 1996/08/14 03:06:07 liang
++ * Modified macro MultAdd so that the assembly code build works.
++ *
++ * Revision 1.1.1.1 1996/02/14 02:35:13 mwg
++ * Redesigned the project directory structure. Merged V.34 into the project.
++ *
++ * Revision 1.5 1994/11/04 22:41:29 mwg
++ * Added #ifdefs for different targets.
++ *
++ ************************************************************************/
++
++#ifndef _MIPS_ASM_H_
++#define _MIPS_ASM_H_
++
++#define zero $0
++#define v0 $2
++#define v1 $3
++#define a0 $4
++#define a1 $5
++#define a2 $6
++#define a3 $7
++#define t0 $8
++#define t1 $9
++#define t2 $10
++#define t3 $11
++#define t4 $12
++#define t5 $13
++#define t6 $14
++#define t7 $15
++#define s0 $16
++#define s1 $17
++#define s2 $18
++#define s3 $19
++#define s4 $20
++#define s5 $21
++#define s6 $22
++#define s7 $23
++#define t8 $24
++#define t9 $25
++#define k0 $26
++#define k1 $27
++#define gp $28
++#define sp $29
++#define fp $30
++#define s8 $30
++#define ra $31
++
++#ifdef EMBEDDED_CALLING_CONVENTION
++
++/* Support for GreenHills embedded calling convention */
++
++#define ASM_PROLOG subu sp, 32; \
++ sw $8, 16(sp); \
++ sw $9, 20(sp); \
++ sw $10, 24(sp); \
++ sw $11, 28(sp);
++
++#define ASM_PROLOG5 subu sp, 32; \
++ sw $8, 16(sp);
++
++#define ASM_PROLOG6 subu sp, 32; \
++ sw $8, 16(sp); \
++ sw $9, 20(sp);
++
++#define ASM_PROLOG7 subu sp, 32; \
++ sw $8, 16(sp); \
++ sw $9, 20(sp); \
++ sw $10, 24(sp);
++
++#define ASM_EPILOG addu sp, 32
++
++#else
++#define ASM_PROLOG
++#define ASM_PROLOG5
++#define ASM_PROLOG6
++#define ASM_PROLOG7
++#define ASM_EPILOG
++#endif
++
++#ifdef DINO /* Special DSP extensions to MIPS core */
++
++#ifndef NO_DINO_WRITEBACK /* DSP extensions with writeback register */
++
++#define MAD(src1, src2) .set noreorder ; mad $0, src1, src2 ; .set reorder
++#define MADW(acc, src1, src2) .set noreorder ; mad acc, src1, src2 ; .set reorder
++#define Mult(dst, src1, src2) .set noreorder ; mult dst, src1, src2 ; .set reorder
++#define MultU(dst, src1, src2) .set noreorder ; multu dst, src1, src2 ; .set reorder
++
++#else /* NO_DINO_WRITEBACK */
++
++#define MAD(src1, src2) .set noreorder ; mad $0, src1, src2 ; .set reorder
++#define MADW(acc, src1, src2) .set noreorder ; mad $0, src1, src2 ; mflo acc ; .set reorder
++#define Mult(dst, src1, src2) multu src1, src2 ; mflo dst
++#define MultU(dst, src1, src2) multu src1, src2 ; mflo dst
++
++#endif /* NO_DINO_WRITEBACK */
++
++#else /* DINO */
++
++#if defined(R3900)
++
++#define MAD(src1, src2) madd $0, src1, src2
++#define MADW(acc, src1, src2) madd acc, src1, src2
++#define Mult(dst, src1, src2) mult dst, src1, src2
++#define MultU(dst, src1, src2) multu dst, src1, src2
++
++#elif defined(bcm47xx_INSTR_MACROS) && defined(bcm47xx)
++
++#define mips_froo(s1,s2,s3) s1##s2##s3
++#define MSUB(s1,s2) .set noreorder ; mips_froo(msub_,s1,s2) ; .set reorder
++#define MAD(s1,s2) .set noreorder ; mips_froo(mad_,s1,s2) ; .set reorder
++#define MADW(acc, s1,s2) .set noreorder ; mips_froo(mad_,s1,s2) ; mflo acc ; .set reorder
++
++#include "BCM4710.h"
++
++#define Mult(dst, src1, src2) mul dst, src1, src2
++#define Mul( src1, src2) mult src1, src2 ;
++#define MultU(dst, src1, src2) multu src1, src2 ; mflo dst
++
++#elif defined(bcm47xx)
++#define MSUB(src1, src2) msub src1, src2
++#define MAD(src1, src2) madd src1, src2
++#define MADW(acc, src1, src2) .set noreorder ; madd src1, src2; mflo acc ; .set reorder
++/*
++#define Mult(dst, src1, src2) mult src1, src2 ; mflo dst
++*/
++#define Mult(dst, src1, src2) mul dst , src1, src2 ;
++#define Mul( src1, src2) mult src1, src2 ;
++#define MultU(dst, src1, src2) multu src1, src2 ; mflo dst
++
++#else
++
++#ifdef R4102
++#define MAD(src1, src2) madd16 src1, src2
++#define MADW(acc, src1, src2) madd16 src1, src2 ; mflo acc
++#else /* R4102 */
++
++#ifdef R4640
++
++#define MAD(src1, src2) madd $0, src1, src2
++#define MADW(acc, src1, src2) madd src1, src2; mflo acc
++
++#else /* R4640 */
++
++#ifdef R4010
++
++#define MAD(src1, src2) madd src1, src2
++#define MADW(acc, src1, src2) madd src1, src2; mflo acc
++
++#else
++#define MAD(src1, src2) .set noat ;\
++ mflo $at ;\
++ sw $2, -4(sp) ;\
++ multu src1, src2 ;\
++ mflo $2 ;\
++ addu $at, $2, $at ;\
++ lw $2, -4(sp) ;\
++ mtlo $at ;\
++ .set at
++
++#define MADW(acc, src1, src2) .set noat ;\
++ mflo $at ;\
++ sw $2, -4(sp) ;\
++ multu src1, src2 ;\
++ mflo $2 ;\
++ addu $at, $2, $at ;\
++ lw $2, -4(sp) ;\
++ move acc, $at ;\
++ mtlo $at ;\
++ .set at
++#endif /* R4010 */
++#endif /* R4102 */
++#endif /* R4640 */
++
++#define Mult(dst, src1, src2) mul dst, src1, src2
++#define MultU(dst, src1, src2) multu src1, src2 ; mflo dst
++
++#endif /* !3900 */
++#endif /* DINO */
++
++
++
++
++
++
++
++
++#endif /* _MIPS_ASM_H_ */
+diff -urN linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/MiscUtil.h linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/MiscUtil.h
+--- linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/MiscUtil.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/MiscUtil.h 2006-06-26 09:07:10.000000000 +0200
+@@ -0,0 +1,65 @@
++/*
++<:copyright-broadcom
++
++ Copyright (c) 2002 Broadcom Corporation
++ All Rights Reserved
++ No portions of this material may be reproduced in any form without the
++ written permission of:
++ Broadcom Corporation
++ 16215 Alton Parkway
++ Irvine, California 92619
++ All information contained in this document is Broadcom Corporation
++ company private, proprietary, and trade secret.
++
++:>
++*/
++/****************************************************************************
++ *
++ * MiscUtil.h -- Miscellaneous utilities
++ *
++ * Description:
++ *
++ *
++ * Copyright (c) 1993-1997 AltoCom, Inc. All rights reserved.
++ * Authors: Mark Gonikberg Haixiang Liang
++ *
++ * $Revision: 1.4 $
++ *
++ * $Id: MiscUtil.h,v 1.4 2004/04/13 00:21:46 ilyas Exp $
++ *
++ * $Log: MiscUtil.h,v $
++ * Revision 1.4 2004/04/13 00:21:46 ilyas
++ * Added standard header for shared ADSL driver files
++ *
++ * Revision 1.3 2001/07/21 01:21:06 ilyas
++ * Added more functions for int to string conversion used by log file
++ *
++ * Revision 1.2 1999/08/05 19:42:56 liang
++ * Merged with the softmodem top of the tree on 08/04/99 for assembly files.
++ *
++ * Revision 1.1 1999/01/27 22:10:12 liang
++ * Initial version.
++ *
++ * Revision 1.1 1997/07/10 01:18:45 mwg
++ * Initial revision.
++ *
++ *
++ *
++ *****************************************************************************/
++#ifndef _MISC_UTIL_H_
++#define _MISC_UTIL_H_
++
++extern long SM_DECL GetRateValue(dataRateMap rate);
++extern int SM_DECL DecToString(ulong value, uchar *dstPtr, uint nDigits);
++extern int SM_DECL HexToString(ulong value, uchar *dstPtr, uint nDigits);
++extern char * SM_DECL DecToStr(char *s, ulong num);
++extern char * SM_DECL SignedToStr(char *s, long num);
++extern char * SM_DECL HexToStr(char *s, ulong num);
++
++#define EvenParityBit(x) ((z = (y = x ^ (x >> 4)) ^ (y >> 2)) ^ (z >> 1))
++#define OddParityBit(x) (EvenParityBit(x) ^ 1)
++
++extern void ParityApply(int nBytes, int nDataBits, int parity, uchar *srcPtr, uchar *dstPtr);
++extern void ParityStrip(int nBytes, int nDataBits, int parity, uchar *srcPtr, uchar *dstPtr, statusHandlerType statusHandler);
++
++#endif
+diff -urN linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/Que.h linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/Que.h
+--- linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/Que.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/Que.h 2006-06-26 09:07:10.000000000 +0200
+@@ -0,0 +1,106 @@
++/*
++<:copyright-broadcom
++
++ Copyright (c) 2002 Broadcom Corporation
++ All Rights Reserved
++ No portions of this material may be reproduced in any form without the
++ written permission of:
++ Broadcom Corporation
++ 16215 Alton Parkway
++ Irvine, California 92619
++ All information contained in this document is Broadcom Corporation
++ company private, proprietary, and trade secret.
++
++:>
++*/
++/****************************************************************************
++ *
++ * Que.h
++ *
++ * Description:
++ * Definition and implementation (via macros and inline functions)
++ * of a simple queue
++ *
++ * Copyright (c) 1993-1998 AltoCom, Inc. All rights reserved.
++ * Authors: Ilya Stomakhin
++ *
++ *****************************************************************************/
++
++#ifndef QueHeader_H_
++#define QueHeader_H_
++
++typedef void * _QueItem;
++
++typedef struct _QueHeader
++ {
++ _QueItem *head; /* first item in the queue */
++ _QueItem *tail; /* last item in the queue */
++ } QueHeader;
++
++/* Queue management macros */
++
++#define QueInit(pqHdr) (((QueHeader *)(pqHdr))->head = ((QueHeader *)(pqHdr))->tail = NULL)
++#define QueEmpty(pqHdr) (NULL == ((QueHeader *)(pqHdr))->head)
++
++#define QueFirst(pqHdr) ((QueHeader *)(pqHdr))->head
++#define QueLast(pqHdr) ((QueHeader *)(pqHdr))->tail
++#define QueNext(pqItem) (*((void **)(pqItem)))
++
++
++#define QueRemoveFirst(pqHdr) do { \
++ if (!QueEmpty(pqHdr)) { \
++ ((QueHeader *)(pqHdr))->head = *((QueHeader *)(pqHdr))->head; \
++ if (QueEmpty(pqHdr)) \
++ ((QueHeader *)(pqHdr))->tail = NULL; \
++ } \
++} while (0)
++#define QueRemove(pqHdr) QueRemoveFirst(pqHdr)
++
++
++#define QueAddLast(pqHdr,pqItem) do { \
++ QueNext(pqItem) = NULL; \
++ if (NULL != ((QueHeader *)(pqHdr))->tail) \
++ *((QueHeader *)(pqHdr))->tail = (pqItem); \
++ else \
++ ((QueHeader *)(pqHdr))->head = (_QueItem *)(pqItem); \
++ ((QueHeader *)(pqHdr))->tail = (_QueItem *)(pqItem); \
++} while (0)
++#define QueAdd(pqHdr,pItem) QueAddLast(pqHdr,pItem)
++
++#define QueAddFirst(pqHdr,pqItem) do { \
++ if (NULL == ((QueHeader *)(pqHdr))->tail) \
++ ((QueHeader *)(pqHdr))->tail = (_QueItem *)(pqItem); \
++ QueNext(pqItem) = ((QueHeader *)(pqHdr))->head; \
++ ((QueHeader *)(pqHdr))->head = (_QueItem *)(pqItem); \
++} while (0)
++
++
++#define QueGet(pqHdr) \
++ (void *) QueFirst(pqHdr); \
++ QueRemove(pqHdr);
++
++#define QueMerge(pqHdr1,pqHdr2) do { \
++ if (NULL == ((QueHeader *)(pqHdr1))->tail) \
++ ((QueHeader *)(pqHdr1))->head = ((QueHeader *)(pqHdr2))->head; \
++ else \
++ QueNext(((QueHeader *)(pqHdr1))->tail) = ((QueHeader *)(pqHdr2))->head; \
++ if (NULL != ((QueHeader *)(pqHdr2))->tail) \
++ ((QueHeader *)(pqHdr1))->tail = ((QueHeader *)(pqHdr2))->tail; \
++} while (0)
++
++#define QueCopy(pqHdr1,pqHdr2) do { \
++ ((QueHeader *)(pqHdr1))->head = ((QueHeader *)(pqHdr2))->head; \
++ ((QueHeader *)(pqHdr1))->tail = ((QueHeader *)(pqHdr2))->tail; \
++} while (0)
++
++#define QueForEach(pqHdr,f,ref) do { \
++ _QueItem *p = ((QueHeader *)(pqHdr))->head; \
++ \
++ while (NULL != p) { \
++ if ( (f)((void *)p, ref) ) break; \
++ p = QueNext(p); \
++ } \
++} while (0)
++
++#endif /* QueHeader_H_ */
++
+diff -urN linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/SoftAtmVc.h linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/SoftAtmVc.h
+--- linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/SoftAtmVc.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/SoftAtmVc.h 2006-06-26 09:07:10.000000000 +0200
+@@ -0,0 +1,569 @@
++/*
++<:copyright-broadcom
++
++ Copyright (c) 2002 Broadcom Corporation
++ All Rights Reserved
++ No portions of this material may be reproduced in any form without the
++ written permission of:
++ Broadcom Corporation
++ 16215 Alton Parkway
++ Irvine, California 92619
++ All information contained in this document is Broadcom Corporation
++ company private, proprietary, and trade secret.
++
++:>
++*/
++/****************************************************************************
++ *
++ * SoftAtmVc.h
++ *
++ * Description:
++ * This file contains ATM VC definitions
++ *
++ *
++ * Copyright (c) 1993-1998 AltoCom, Inc. All rights reserved.
++ * Authors: Ilya Stomakhin
++ *
++ * $Revision: 1.27 $
++ *
++ * $Id: SoftAtmVc.h,v 1.27 2004/06/02 22:26:17 ilyas Exp $
++ *
++ * $Log: SoftAtmVc.h,v $
++ * Revision 1.27 2004/06/02 22:26:17 ilyas
++ * Added ATM counters for G.992.3
++ *
++ * Revision 1.26 2004/03/10 22:57:20 ilyas
++ * Added I.432 scramling control
++ *
++ * Revision 1.25 2003/09/23 00:21:59 ilyas
++ * Added status to indicate ATM header compression
++ *
++ * Revision 1.24 2003/08/27 02:00:50 ilyas
++ * Original implementation of ATM header compression
++ *
++ * Revision 1.23 2003/02/25 04:13:15 ilyas
++ * Added standard Broadcom header
++ *
++ * Revision 1.22 2003/01/10 23:25:48 ilyas
++ * Added ATM status definition
++ *
++ * Revision 1.21 2002/09/12 21:07:19 ilyas
++ * Added HEC, OCD and LCD counters
++ *
++ * Revision 1.20 2002/04/02 09:58:00 ilyas
++ * Initial implementatoin of BERT
++ *
++ * Revision 1.19 2001/10/09 22:35:14 ilyas
++ * Added more ATM statistics and OAM support
++ *
++ * Revision 1.18 2001/06/18 19:49:36 ilyas
++ * Changes to include support for HOST_ONLY mode
++ *
++ * Revision 1.17 2001/02/23 05:49:57 ilyas
++ * Added routed 1483 encapsulation
++ *
++ * Revision 1.16 2001/02/09 04:18:18 ilyas
++ * Added framer for bridged ethernet PDUs
++ *
++ * Revision 1.15 2001/02/09 01:55:27 ilyas
++ * Added status codes and macros to support printing of AAL packets
++ *
++ * Revision 1.14 2000/09/21 17:28:35 ilyas
++ * Added VBR support to traffic management code, separated UBR to a different
++ * Tx list, changed some of the algorithms
++ *
++ * Revision 1.13 2000/08/23 18:42:13 ilyas
++ * Added AAL2, added VcConfigure functions, moved commonly used look-up
++ * tables for CRC calculation to AtmLayer
++ *
++ * Revision 1.12 2000/08/02 03:06:22 ilyas
++ * Added support for reserving space in RX packets for ATm protocols
++ *
++ * Revision 1.11 2000/07/28 17:23:39 ilyas
++ * Added ATM connect/disconnect statuses
++ *
++ * Revision 1.10 2000/07/25 02:16:12 ilyas
++ * Added EClip (with Eth to ATM ARP translation) implementation
++ *
++ * Revision 1.9 2000/07/23 20:57:14 ilyas
++ * Added ATM framer and protocol layers
++ *
++ * Revision 1.8 2000/07/17 21:08:16 lkaplan
++ * removed global pointer
++ *
++ * Revision 1.7 2000/06/09 18:33:04 liang
++ * Fixed Irix compiler warnings.
++ *
++ * Revision 1.6 2000/05/18 21:47:31 ilyas
++ * Added detection of preassigned cells such as OAM F4, F5
++ *
++ * Revision 1.5 2000/05/14 01:50:11 ilyas
++ * Added more statuses to ATM code
++ *
++ * Revision 1.4 2000/05/10 02:41:28 liang
++ * Added status report for no cell memory
++ *
++ * Revision 1.3 2000/05/09 23:00:27 ilyas
++ * Added ATM status messages, ATM timer, Tx frames flush on timeout
++ * Fixed a bug - adding flushed Tx frames to the list of free Rx frames
++ *
++ * Revision 1.2 2000/05/03 03:53:00 ilyas
++ * Added support for pVc to vcID translation needed for LOG file and other
++ * definitions for ATM data in LOG file
++ *
++ * Revision 1.1 2000/04/19 00:21:35 ilyas
++ * Fixed some problems and added Out Of Band (OOB) support to ATM packets
++ *
++ *
++ *****************************************************************************/
++
++#ifndef SoftAtmVcHeader
++#define SoftAtmVcHeader
++
++/*
++**
++** ATM UNI types
++**
++*/
++
++#define AtmLinkFlags(bMap,name) (((bMap) >> name##Shift) & name##Mask)
++
++/* ATM service category types */
++
++#define kAtmSrvcCBR 1 /* Constant Bit Rate */
++#define kAtmSrvcVBR 2 /* Variable Bit Rate */
++#define kAtmSrvcUBR 4 /* Unspecified Bit Rate */
++#define kAtmSrvcABR 8 /* Available Bit Rate */
++#define kAtmSrvcUnknown 0xFF
++
++/* ATM AAL types (as encoded at UNI) */
++
++#define kAtmAalIE 0x58
++
++#define kAtmRaw 0
++#define kAtmAal1 1
++#define kAtmAal2 2
++#define kAtmAal34 3
++#define kAtmAal5 5
++#define kAtmAalUser 16
++#define kAtmAalUnknown 0xFF
++
++/* ATM AAL1 parameters */
++
++#define kAal1SubTypeId 0x85
++
++#define kAal1TransportShift 0
++#define kAal1TransportMask 0x7
++
++#define kAal1NullTransport 0
++#define kAal1VoiceTransport 1
++#define kAal1CircuitTransport 2
++#define kAal1AudioTransport 4
++#define kAal1VideoTransport 5
++
++
++#define kAal1CBRId 0x86
++
++#define kAal1CBRShift 24
++#define kAal1CBRMask 0xFF
++
++#define kAal1CBR64 1
++#define kAal1CBR1544 4 /* DS1 */
++#define kAal1CBR6312 5 /* DS2 */
++#define kAal1CBR32064 6
++#define kAal1CBR44736 7 /* DS3 */
++#define kAal1CBR97728 8
++#define kAal1CBR2048 0x10 /* E1 */
++#define kAal1CBR8448 0x11 /* E2 */
++#define kAal1CBR34368 0x12 /* E3 */
++#define kAal1CBR139264 0x13
++#define kAal1CBR64xN 0x40
++#define kAal1CBR8xN 0x41
++
++
++#define kAal1MultiplierId 0x87
++
++#define kAal1ClockRecoveryId 0x88
++
++#define kAal1ClockRecoveryShift 3
++#define kAal1ClockRecoveryMask 0x3
++
++#define kAal1ClockRecoveryNull 1 /* synchronous transport */
++#define kAal1ClockRecoverySRTS 1 /* asynchronous transport */
++#define kAal1ClockRecoveryAdaptive 2
++
++
++#define kAal1ECMId 0x89 /* Error correction method */
++
++#define kAal1ECMShift (kAal1ClockRecoveryShift + 2)
++#define kAal1ECMMask 0x3
++
++#define kAal1ECMNull 0
++#define kAal1ECMLossSensitive 1
++#define kAal1ECMDelaySensitive 2
++
++
++#define kAal1SDTBlockSizeId 0x8A
++
++#define kAal1CellFillId 0x8B
++
++/* ATM AAL34 and AAL5 parameters */
++
++#define kAalFwdMaxSDUSizeId 0x8C
++#define kAalBacMaxkSDUSizeId 0x81
++
++#define kAal34MidRangeId 0x82
++
++#define kAalSSCSTypeId 0x84
++
++#define kAalSSCSAssured 1
++#define kAalSSCSNonAssured 2
++#define kAalSSCSFrameRelay 4
++
++/* ATM AAL2 parameters */
++
++#define kAal2SSNone 0
++#define kAal2SSSAR 1
++#define kAal2SSTED 2
++#define kAal2SSSARMask 3
++#define kAal2SSType1 4
++#define kAal2SSType3 5
++
++typedef struct {
++ uchar aalType;
++ union {
++ struct {
++ bitMap aal1Flags;
++ ulong cbrRate;
++ ushort blkSize;
++ uchar sarUsed;
++ } aal1Params;
++ struct {
++ ushort fwdMaxCpSize; /* Max "common part" packet size */
++ ushort backMaxCpSize;
++ ushort cidLow;
++ ushort cidHigh;
++ ushort fwdMaxSsSize; /* Max "service specific" packet size */
++ ushort backMaxSsSize;
++ uchar sscsType;
++ } aal2Params;
++ struct {
++ ushort fwdMaxSDUSize;
++ ushort backMaxSDUSize;
++ ushort midLow;
++ ushort midHigh;
++ uchar sscsType;
++ } aal34Params;
++ struct {
++ ushort fwdMaxSDUSize;
++ ushort backMaxSDUSize;
++ uchar sscsType;
++ } aal5Params;
++ } param;
++} atmAalParams;
++
++/* ATM Traffic Descriptor types (as encoded at UNI) */
++
++#define kAtmTrafficIE 0x59
++
++#define kTrafficFwdPeakCellRateId0 0x82
++#define kTrafficBackPeakCellRateId0 0x83
++#define kTrafficFwdPeakCellRateId 0x84
++#define kTrafficBackPeakCellRateId 0x85
++
++#define kTrafficFwdSustainCellRateId0 0x88
++#define kTrafficBackSustainCellRateId0 0x89
++#define kTrafficFwdSustainCellRateId 0x90
++#define kTrafficBackSustainCellRateId 0x91
++
++#define kTrafficFwdMaxBurstSizeId0 0xA0
++#define kTrafficBackMaxBurstSizeId0 0xA1
++#define kTrafficFwdMaxBurstSizeId 0xB0
++#define kTrafficBackMaxBurstSizeId 0xB1
++
++#define kTrafficBestEffortId 0xBE
++#define kTrafficMgrOptionsId 0xBF
++
++#define kTrafficMaxTolerance 0x7FFFFFFF
++
++/* trafficFlags coding */
++
++#define kTrafficTagFwd 1
++#define kTrafficTagBack 2
++#define kTrafficBestEffort 4
++
++typedef struct {
++ ulong tPCR0; /* CLP = 0, time between cells in us */
++ ulong tPCR; /* CLP = 0+1 */
++ ulong tolPCR; /* tolerance for PCR in us */
++
++ ulong tSCR0; /* CLP = 0 */
++ ulong tSCR; /* CLP = 0+1 */
++ ulong tolSCR; /* tolerance for SCR in us */
++
++ uchar atmServiceType; /* CBR, VBR, UBR, etc. */
++ uchar trafficFlags;
++} atmTrafficParams;
++
++/* ATM Broadband Bearer Capabilty (BBC) types (as encoded at UNI) */
++
++#define kAtmBBCIE 0x5E
++
++#define kBBCClassShift 0
++#define kBBCClassMask 0x1F
++
++#define kBBCClassA 0x1
++#define kBBCClassC 0x3
++#define kBBCClassX 0x10
++
++
++#define kBBCTrafficShift (kBBCClassShift + 5)
++#define kBBCTrafficMask 0x7
++
++#define kBBCTrafficNull 0
++#define kBBCTrafficCBR 1
++#define kBBCTrafficVBR 2
++
++
++#define kBBCTimingShift (kBBCTrafficShift + 3)
++#define kBBCTimingMask 0x3
++
++#define kBBCTimingNull 0
++#define kBBCTimingRequired 1
++#define kBBCTimingNotRequired 2
++
++
++#define kBBCClippingShift (kBBCTimingShift + 2)
++#define kBBCClippingMask 0x3
++
++#define kBBCNoClipping 0
++#define kBBCClippingOk 1
++
++#define kBBCConnectionShift (kBBCClippingShift + 2)
++#define kBBCConnectionMask 0x3
++
++#define kBBCPoint2Point 0
++#define kBBCPoint2MPoint 1
++
++/* ATM Broadband High/Low Layer Information (BHLI/BLLI) types (as encoded at UNI) */
++
++#define kAtmBHLIIE 0x5D
++#define kAtmBLLIIE 0x5F
++
++/* ATM QoS types (as encoded at UNI) */
++
++#define kAtmQoSIE 0x5C
++
++#define kQoSNull 0
++#define kQoSClass1 1
++#define kQoSClass2 2
++#define kQoSClass3 3
++#define kQoSClass4 4
++#define kQoSReserved 0xFF
++
++typedef struct {
++ uchar fwdQoSClass;
++ uchar backQoSClass;
++} atmQoSParams;
++
++/* ATM MID definitions (ConfigureHandler) */
++
++#define kAtmMidEntireVc ((ulong) -1)
++
++typedef struct {
++ void *pUserVc; /* VC id from the caller: has to be 1st !!! */
++ ulong vci;
++ uchar defaultCLP; /* default CLP for tx packets on this VC */
++ uchar framerId;
++ uchar protoId;
++ uchar protoRxBytesReserved; /* # bytes reserved by protocol in the beginning of Rx packet */
++ uchar protoTxBytesReserved; /* # bytes reserved by protocol in the beginning of Tx packet */
++
++ atmAalParams aalParams;
++ atmTrafficParams rxTrafficParams;
++ atmTrafficParams txTrafficParams;
++ bitMap bbcFlags;
++ atmQoSParams qosParams;
++} atmVcParams;
++
++/*
++**
++** ATM Out of Band (OOB) packet information
++**
++*/
++
++typedef struct {
++ Boolean clp; /* Cell Loss Prioroty */
++ uchar aalType;
++ union {
++ struct {
++ uchar payloadType;
++ } aalRawParams;
++ struct {
++ uchar payloadType;
++ ushort mid;
++ } aal34Params;
++ struct {
++ uchar uui; /* Uses to user indicator */
++ uchar cpi; /* common part indicator */
++ } aal5Params;
++ } aalParam;
++} atmOobPacketInfo;
++
++/*
++**
++** ATM setup bit definition
++**
++*/
++
++#define kAtmCorrectHecErrors 1
++#define kCorrectHecErrors kAtmCorrectHecErrors
++#define kAtmPhyHeaderCompression 2
++#define kAtmPhyNoDataScrambling 4
++
++#define kAtmTxIdleTimeoutMask 0x6
++#define kAtmTxIdleNoTimeout 0
++#define kAtmTxIdleTimeout10s 2
++#define kAtmTxIdleTimeout30s 4
++#define kAtmTxIdleTimeout60s 6
++
++/*
++**
++** ATM framer modes and protocol definitions
++**
++*/
++
++#define kAtmFramerNone 0
++#define kAtmFramerISO 1
++#define kAtmFramerIP 2
++#define kAtmFramerEth 3
++#define kAtmFramerEthWithCRC 4
++
++#define kAtmProtoNone 0
++#define kAtmProtoEClip 1
++#define kAtmProtoERouted1483 2
++#define kAtmProtoPPP 3
++
++
++/*
++**
++** ATM status codes
++**
++*/
++
++typedef void (*atmStatusHandler) (void *gDslVars, ulong statusCode, ...);
++
++/* physical layer I.432 */
++
++#define kAtmStatRxHunt 1
++#define kAtmStatRxPreSync 2
++#define kAtmStatRxSync 3
++#define kAtmStatRxPlOamCell 4
++#define kAtmStatBertResult 5
++#define kAtmStatHec 6
++#define kAtmStatHdrCompr 7
++#define kAtmStatCounters 8
++
++/* ATM layer */
++
++#define kAtmLayerStatFirst 100
++#define kAtmStatRxDiscarded 100
++#define kAtmStatTxDelayed 101
++
++#define kAtmStatVcCreated 102
++#define kAtmStatVcStarted 103
++#define kAtmStatVcStopped 104
++#define kAtmStatVcDeleted 105
++
++#define kAtmStatTimeout 106
++#define kAtmStatNoCellMemory 107
++#define kAtmStatPrintCell 108
++#define kAtmStatInvalidCell 109
++#define kAtmStatUnassignedCell 110
++#define kAtmStatOamF4SegmentCell 111
++#define kAtmStatOamF4End2EndCell 112
++#define kAtmStatOamI371Cell 113
++#define kAtmStatOamF5SegmentCell 114
++#define kAtmStatOamF5End2EndCell 115
++#define kAtmStatReservedCell 116
++
++#define kAtmStatConnected 117
++#define kAtmStatDisconnected 118
++
++#define kAtmStatRxPacket 119
++#define kAtmStatTxPacket 120
++
++#define kAtmStatOamLoopback 121
++
++
++typedef struct _atmPhyCounters {
++ ushort id;
++ ushort bertStatus;
++ ulong bertCellTotal;
++ ulong bertCellCnt;
++ ulong bertBitErrors;
++
++ ulong rxHecCnt;
++ ulong rxCellTotal;
++ ulong rxCellData;
++ ulong rxCellDrop;
++} atmPhyCounters;
++
++/* AAL layer */
++
++
++
++/*
++**
++** ATM log file definitions
++**
++*/
++
++/* ATM log file flags */
++
++#define kAtmLogFrameFlagMask 3 /* mask */
++
++#define kAtmLogFrameFlagNone 0 /* nothing */
++#define kAtmLogFrameFlagNoData 1 /* no data only frame size */
++#define kAtmLogFrameFlagBinData 2 /* data in binary form */
++#define kAtmLogFrameFlagTextData 3 /* data in text form */
++
++#define kAtmLogSendFrameShift 0
++#define kAtmLogSendFrameNoData (kAtmLogFrameFlagNoData << kAtmLogSendFrameShift)
++#define kAtmLogSendFrameBinData (kAtmLogFrameFlagBinData << kAtmLogSendFrameShift)
++#define kAtmLogSendFrameTextData (kAtmLogFrameFlagTextData << kAtmLogSendFrameShift)
++
++#define kAtmLogRcvFrameShift 2
++#define kAtmLogRcvFrameNone (kAtmLogFrameFlagNone << kAtmLogRcvFrameShift)
++#define kAtmLogRcvFrameNoData (kAtmLogFrameFlagNoData << kAtmLogRcvFrameShift)
++#define kAtmLogRcvFrameBinData (kAtmLogFrameFlagBinData << kAtmLogRcvFrameShift)
++#define kAtmLogRcvFrameTextData (kAtmLogFrameFlagTextData << kAtmLogRcvFrameShift)
++
++#define kAtmLogSendCompleteFrameShift 4
++#define kAtmLogSendCompleteFrameNone (kAtmLogFrameFlagNone << kAtmLogSendCompleteFrameShift)
++#define kAtmLogSendCompleteFrameNoData (kAtmLogFrameFlagNoData << kAtmLogSendCompleteFrameShift)
++
++#define kAtmLogReturnFrameShift 6
++#define kAtmLogReturnFrameNoData (kAtmLogFrameFlagNoData << kAtmLogReturnFrameShift)
++
++#define kAtmLogCellFlag (1 << 8)
++
++/* ATM log codes */
++
++#define kAtmLogSendFrame 1
++#define kAtmLogRcvFrame 2
++#define kAtmLogSendFrameComplete 3
++#define kAtmLogReturnFrame 4
++#define kAtmLogVcAllocate 5
++#define kAtmLogVcFree 6
++#define kAtmLogVcActivate 7
++#define kAtmLogVcDeactivate 8
++#define kAtmLogTimer 9
++#define kAtmLogCell 10
++#define kAtmLogVcConfigure 11
++
++#define kAtmLogRxCellHeader 12
++#define kAtmLogRxCellData 13
++#define kAtmLogTxCell 14
++
++#endif /* SoftAtmVcHeader */
+diff -urN linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/SoftDsl.gh linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/SoftDsl.gh
+--- linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/SoftDsl.gh 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/SoftDsl.gh 2006-06-26 09:07:10.000000000 +0200
+@@ -0,0 +1,675 @@
++/****************************************************************************
++ *
++ * SoftDsl.gh
++ *
++ * Description:
++ * This is a header file which defines the type for the DSL
++ * global variable structure.
++ *
++ * Copyright (c) 1993-1997 AltoCom, Inc. All rights reserved.
++ * Authors: Ilya Stomakhin
++ *
++ * $Revision: 1.72 $
++ *
++ * $Id: SoftDsl.gh,v 1.72 2004/04/30 23:05:19 kdu Exp $
++ *
++ * $Log: SoftDsl.gh,v $
++ * Revision 1.72 2004/04/30 23:05:19 kdu
++ * Fixed interop issues in TDC lab for TMM.
++ *
++ * Revision 1.70 2004/04/10 23:30:48 ilyas
++ * Defined gloval structure for slow (SDRAM) data
++ *
++ * Revision 1.69 2004/04/02 18:33:45 gsyu
++ * Share MuxFramer buffers with scratch memory
++ *
++ * Revision 1.68 2004/02/04 20:12:38 linyin
++ * Support adsl2plus
++ *
++ * Revision 1.67 2004/02/03 19:10:37 gsyu
++ * Added separated carrierInfo structures for G992P5
++ *
++ * Revision 1.66 2004/01/26 04:21:06 yongbing
++ * Merge changes in ADSL2 branch into Annex A branch
++ *
++ * Revision 1.65 2004/01/13 19:12:07 gsyu
++ * Added two more variables for Double upstream
++ *
++ * Revision 1.64 2003/12/04 02:10:37 linyin
++ * Add a variable for FbmsOL mode
++ *
++ * Revision 1.63 2003/11/20 00:57:50 yongbing
++ * Merge ADSL2 functionalities into Annex A branch
++ *
++ * Revision 1.62 2003/11/05 01:59:12 liang
++ * Add vendor ID code for Infineon.
++ *
++ * Revision 1.61 2003/08/12 22:59:41 khp
++ * - for Haixiang: added support for ADSL_MARGIN_TWEAK_TEST
++ *
++ * Revision 1.60 2003/08/01 00:08:19 liang
++ * Added firmware ID for Samsung ADI 930 DSLAM.
++ *
++ * Revision 1.59 2003/07/14 14:40:08 khp
++ * - AnnexB: added bad SNR2 retrain counter to connectin setup
++ *
++ * Revision 1.58 2003/06/25 02:40:22 liang
++ * Added firmware ID for Annex A UE9000 ADI918 (from Aliant, Canada).
++ *
++ * Revision 1.57 2003/06/25 00:00:40 ilyas
++ * -added firmware IDs for TI 4000C and AC5 (Annex B)
++ *
++ * Revision 1.56 2003/05/31 01:50:38 khp
++ * -add firmware IDs for ECI16 and ECI16A
++ *
++ * Revision 1.55 2003/03/27 19:30:52 liang
++ * Add and initialize new connectionSetup field coVendorFirmwareID under module ADSL_IDENTIFY_VENDOR_FIRMWARE.
++ *
++ * Revision 1.54 2002/12/13 18:35:48 yongbing
++ * Add support for G.992.2 Annex C in start up
++ *
++ * Revision 1.53 2002/12/06 02:06:33 liang
++ * Moved the T1.413 RAck1/RAck2 switching variables to connection setup structure.
++ *
++ * Revision 1.52 2002/11/26 02:49:46 liang
++ * Added variable codingGainDecrement to the connectionSetup structure to solve the C-Rates-RA option failure problem.
++ *
++ * Revision 1.51 2002/10/20 18:56:16 khp
++ * - for linyin:
++ * - #ifdef NEC_NSIF_WORKAROUND:
++ * - add status and fail counter for NSIF
++ *
++ * Revision 1.50 2002/09/28 02:36:50 yongbing
++ * Add retrain in T1.413 with R-Ack1 tone
++ *
++ * Revision 1.49 2002/09/12 21:07:19 ilyas
++ * Added HEC, OCD and LCD counters
++ *
++ * Revision 1.48 2002/07/19 01:51:35 liang
++ * Added vendor ID constant for Alcatel.
++ *
++ * Revision 1.47 2002/06/27 21:51:08 liang
++ * Added xmt and rcv tone selection bitmap in connection setup.
++ *
++ * Revision 1.46 2002/06/11 20:48:06 liang
++ * Added CO vendor ID field to connectionSetup structure.
++ *
++ * Revision 1.45 2002/06/06 03:05:43 khp
++ * -use boolean in connectup setup instead of localCapabilities.features to indicate FBM mode
++ *
++ * Revision 1.44 2002/03/22 19:38:58 yongbing
++ * Modify for co-exist of G994P1 and T1P413
++ *
++ * Revision 1.43 2002/03/02 00:52:40 ilyas
++ * AnnexC delay needs to be long for prototype
++ *
++ * Revision 1.42 2002/01/19 23:59:17 ilyas
++ * Added support for LOG and eye data to ADSL core target
++ *
++ * Revision 1.41 2002/01/16 19:03:59 ilyas
++ * Added HOST_ONLY ifdefs around ADSL core data
++ *
++ * Revision 1.40 2002/01/14 17:41:04 liang
++ * Move xmt & rcv sample buffers to top level.
++ *
++ * Revision 1.39 2001/12/21 22:45:34 ilyas
++ * Added support for ADSL MIB data object
++ *
++ * Revision 1.38 2001/12/13 02:24:22 ilyas
++ * Added G997 (Clear EOC and G997 framer) support
++ *
++ * Revision 1.37 2001/11/30 05:56:31 liang
++ * Merged top of the branch AnnexBDevelopment onto top of the tree.
++ *
++ * Revision 1.36 2001/10/19 00:12:07 ilyas
++ * Added support for frame oriented (no ATM) data link layer
++ *
++ * Revision 1.29.2.5 2001/10/03 01:44:00 liang
++ * Merged with codes from main tree (tag SoftDsl_2_18).
++ *
++ * Revision 1.29.2.4 2001/08/18 00:00:36 georgep
++ * Add variable to store annexC pathDelay
++ *
++ * Revision 1.29.2.3 2001/08/08 17:33:27 yongbing
++ * Merge with tag SoftDsl_2_17
++ *
++ * Revision 1.35 2001/08/29 02:56:01 ilyas
++ * Added tests for flattening/unflatenning command and statuses (dual mode)
++ *
++ * Revision 1.34 2001/08/28 03:26:32 ilyas
++ * Added support for running host and adsl core parts separately ("dual" mode)
++ *
++ * Revision 1.33 2001/06/18 19:49:36 ilyas
++ * Changes to include support for HOST_ONLY mode
++ *
++ * Revision 1.32 2001/05/18 21:21:44 liang
++ * Save the current number of rcv samples to line handler for QProc test.
++ *
++ * Revision 1.31 2001/04/25 01:20:11 ilyas
++ *
++ * Don't use DSL frame functions if ATM_LAYER is not defined
++ *
++ * Revision 1.30 2001/03/25 06:11:20 liang
++ * Combined separate loop attenuation status for ATUR & ATUC into one status.
++ * Replace separate hardware AGC info status for ATUR & ATUC into hardware AGC
++ * request status and hardware AGC obtained status.
++ * Use store AGC command to save hardware AGC value instead of returning value
++ * from status report.
++ *
++ * Revision 1.29 2001/03/17 03:00:46 georgep
++ * Added agcInfo to connectionSetupStruct
++ *
++ * Revision 1.28 2001/02/10 03:03:09 ilyas
++ * Added one more DslFrame function
++ *
++ * Revision 1.27 2000/08/31 19:04:24 liang
++ * Added scratch buffer structure definition.
++ *
++ * Revision 1.26 2000/07/23 20:52:52 ilyas
++ * Added xxxFrameBufSetAddress() function for ATM framer layers
++ * Rearranged linkLayer functions in one structure which is passed as a
++ * parameter to xxxLinkLayerInit() function to be set there
++ *
++ * Revision 1.25 2000/07/18 21:42:25 ilyas
++ * Fixed compiler warning about pointer casting
++ *
++ * Revision 1.24 2000/07/18 21:18:45 ilyas
++ * Added GLOBAL_PTR_BIAS feature to utilize full 64K MIPS relative addressing space
++ *
++ * Revision 1.23 2000/07/18 20:03:24 ilyas
++ * Changed DslFrame functions definitions to macros,
++ * Removed gDslVars from their parameter list
++ *
++ * Revision 1.22 2000/07/17 21:08:15 lkaplan
++ * removed global pointer
++ *
++ * Revision 1.21 2000/05/09 23:00:26 ilyas
++ * Added ATM status messages, ATM timer, Tx frames flush on timeout
++ * Fixed a bug - adding flushed Tx frames to the list of free Rx frames
++ *
++ * Revision 1.20 2000/05/03 03:57:04 ilyas
++ * Added LOG file support for writing ATM data
++ *
++ * Revision 1.19 2000/04/19 00:31:47 ilyas
++ * Added global SoftDsl functions for Vc, added OOB info functions
++ *
++ * Revision 1.18 2000/04/13 08:36:22 yura
++ * Added SoftDslSetRefData, SoftDslGetRefData functions
++ *
++ * Revision 1.17 2000/04/13 05:38:54 georgep
++ * Added T1p413 "Activation and Acknowledgement" which can substitute G994P1
++ *
++ * Revision 1.16 2000/04/05 22:30:42 liang
++ * Changed function & constant names from G992p2 to G992 for the Main module.
++ *
++ * Revision 1.15 2000/04/04 04:16:06 liang
++ * Merged with SoftDsl_0_03 from old tree.
++ *
++ * Revision 1.15 2000/04/04 01:47:21 ilyas
++ * Implemented abstract dslFrame and dslFrameBuffer objects
++ *
++ * Revision 1.14 2000/04/01 02:53:33 georgep
++ * Added pointer to G992p2Profile inside connectionSetup
++ *
++ * Revision 1.13 2000/03/18 01:27:56 georgep
++ * Changed connectionSetup to include G992p1 Capabilities
++ *
++ * Revision 1.12 2000/02/29 01:39:05 georgep
++ * put variable haveRemoteCapabilities inside connectionSetupStruct
++ *
++ * Revision 1.11 2000/02/08 00:44:36 liang
++ * Fix the gDslVars definition for Irix environment.
++ *
++ * Revision 1.10 1999/11/19 00:59:29 george
++ * Define physicalLayerVars as a union
++ *
++ * Revision 1.9 1999/11/11 19:19:42 george
++ * Porting to 16Bit Compiler
++ *
++ * Revision 1.8 1999/11/09 20:26:17 george
++ * Added G992P2_PROFILE to modules list
++ *
++ * Revision 1.7 1999/10/27 23:01:54 wan
++ * Add G.994.1 setup in dslConnectionSetupStruct for setting up Initiation side
++ *
++ * Revision 1.6 1999/08/12 21:16:27 george
++ * Move profileVars definition to G992p2/G992p2Profile.gh
++ *
++ * Revision 1.5 1999/08/10 18:20:43 george
++ * Define fastRetrainVars
++ *
++ * Revision 1.4 1999/07/16 02:03:02 liang
++ * Added Tx & Rx data handler function pointers.
++ *
++ * Revision 1.3 1999/07/03 01:40:15 liang
++ * Redefined dsl command parameter list and added connection setup struct.
++ *
++ * Revision 1.2 1999/02/10 01:56:37 liang
++ * Added hooks for G994.1 and G992.2.
++ *
++ *
++ *****************************************************************************/
++
++#ifndef SoftDslGlobals
++#define SoftDslGlobals
++
++#include "SoftDsl.h"
++
++#ifdef G992P2_PROFILE
++#include "G992p2Profile.gh"
++#endif
++
++typedef enum
++ {
++ kVendorUnknown = 0,
++ kVendorBroadcom,
++ kVendorGlobespan,
++ kVendorADI,
++ kVendorTI,
++ kVendorCentillium,
++ kVendorAlcatel,
++ kVendorInfineon
++ } VendorIDType;
++
++#define kDslVendorFirwareUnknown 0
++typedef enum
++ {
++ kVendorADI_Anaconda = 1,
++ kVendorADI_ECI918,
++ kVendorADI_ECI930,
++ kVendorADI_Cisco,
++ kVendorADI_UE9000_918,
++ kVendorADI_Samsung_930,
++ kVendorTI_4000C_ERICSSON_350,
++ kVendorTI_4000C_SEIMENS,
++ kVendorADI_ECI16_AnnexB = 50, /* leave space for more Annex A types */
++ kVendorADI_ECI16A_AnnexB,
++ kVendorTI_4000C_AnnexB,
++ kVendorTI_AC5_AnnexB
++ } VendorFirmwareIDType;
++
++#define kDslXmtToneSelectionStartTone 0
++#ifdef G992P1_ANNEX_B
++#define kDslXmtToneSelectionEndTone 63
++#else
++#define kDslXmtToneSelectionEndTone 31
++#endif
++#define kDslXmtToneSelectionNumOfTones (kDslXmtToneSelectionEndTone-kDslXmtToneSelectionStartTone+1)
++#define kDslXmtToneSelectionNumOfBytes ((kDslXmtToneSelectionNumOfTones+7)/8)
++#define kDslRcvToneSelectionStartTone 32
++#define kDslRcvToneSelectionEndTone 255
++#define kDslRcvToneSelectionNumOfTones (kDslRcvToneSelectionEndTone-kDslRcvToneSelectionStartTone+1)
++#define kDslRcvToneSelectionNumOfBytes ((kDslRcvToneSelectionNumOfTones+7)/8)
++
++#define kDslT1p413RAckModeTryRAck1 0x01
++#define kDslT1p413RAckModeTryRAck2 0x02
++#define kDslT1p413RAckModeTrialMask 0x0F
++#define kDslT1p413RAckModeSelected 0x10
++#define kDslT1p413RAckModeTrialCount 10 /* when in trial mode */
++#define kDslT1p413RAckModeSwitchCount 20 /* when mode is selected */
++
++#ifdef ADSL_MARGIN_TWEAK_TEST
++#define kDslMarginTweakNumOfTones 256
++#endif
++
++typedef struct
++ {
++ Boolean haveRemoteCapabilities;
++ dslModulationType selectedModulation;
++ dslModulationType startupModulation;
++#if defined(G992P1_ANNEX_I) || defined(G992P5)
++ ushort downstreamMinCarr, downstreamMaxCarr;
++#else
++ uchar downstreamMinCarr, downstreamMaxCarr;
++#endif
++ uchar upstreamMinCarr, upstreamMaxCarr;
++#if defined(DOUBLE_UP_STREAM)
++ Boolean isDoubleUsEnabled;
++ short selectedPilotTone;
++#endif
++ dslDataPumpCapabilities localCapabilities, remoteCapabilities;
++#ifdef G992P3
++ g992p3DataPumpCapabilities localCarrierInfoG992p3AnnexA;
++ g992p3DataPumpCapabilities remoteCarrierInfoG992p3AnnexA;
++ g992p3DataPumpCapabilities selectedCarrierInfoG992p3AnnexA;
++ uchar xmtG992p3State;
++#ifdef G992P5
++ g992p3DataPumpCapabilities localCarrierInfoG992p5AnnexA;
++ g992p3DataPumpCapabilities remoteCarrierInfoG992p5AnnexA;
++ g992p3DataPumpCapabilities selectedCarrierInfoG992p5AnnexA;
++#endif /* G992P5 */
++#endif /* G992P3 */
++ uchar handshakingDuplexMode;
++ Boolean handshakingClientInitiation;
++ short handshakingXmtPowerLevel;
++ uchar handshakingXmtCarrierSet;
++ short hwAgcQ4dB; /* for loop attenuation calculation */
++ uchar coVendorID;
++#ifdef ADSL_IDENTIFY_VENDOR_FIRMWARE
++ uchar coVendorFirmwareID;
++#endif
++ uchar codingGainDecrement; /* coding gain decrement in Q4dB for initial rate calculation */
++ uchar xmtToneSelection[kDslXmtToneSelectionNumOfBytes];
++ uchar rcvToneSelection[kDslRcvToneSelectionNumOfBytes];
++#ifdef G992_ANNEXC
++ Boolean isFbmMode;
++ Boolean isFbmsOLMode;
++ long xmtToRcvPathDelay;
++#endif
++#if defined(T1P413) && defined(XMT_RACT2_FOR_ADI_COMPATIBILITY)
++ uchar t1p413RAckModeUsed;
++ uchar t1p413RAckModeCounter;
++#endif
++#ifdef G992P1_ANNEX_B
++ uchar badSNR2RetrainCounter;
++#endif
++#ifdef ADSL_MARGIN_TWEAK_TEST
++ short marginTweakExtraPowerQ4dB;
++ char marginTweakTableQ4dB[kDslMarginTweakNumOfTones];
++#endif
++#ifdef G992P2_PROFILE
++ G992p2ProfileVarsStruct* profileVarsPtr;
++#endif
++#ifdef TDC_IOP_FIX_SEIMENS_TI
++ char t1p413RetrainCounter; /* 0: no retrain needed; 1: force to T1.413 mode and retrain after R-MSG1; 2: 2nd T1.413 session, go to showtime */
++#endif
++#ifdef ANSI_CACT12_PING_PONG
++ char t1p413SkipToneIndex; /* to alternate between CAct1 and CAct2 detection */
++#endif
++ } dslConnectionSetupStruct;
++
++#ifdef ADSL_FRAMER
++#include "MuxFramer.gh"
++#endif
++
++#ifdef ATM
++#include "SoftAtm.gh"
++#endif
++
++#ifdef DSL_PACKET
++#include "DslPacket.gh"
++#endif
++
++#ifdef G997_1_FRAMER
++#include "G997.gh"
++#ifdef G992P3
++#include "G992p3OvhMsg.gh"
++#endif
++#endif
++
++#ifdef ADSL_MIB
++#include "AdslMib.gh"
++#endif
++
++#ifndef HOST_ONLY
++#ifdef T1P413
++#include "T1p413Main.gh"
++#endif
++
++#ifdef G994P1
++#include "G994p1Main.gh"
++#endif
++
++#ifdef G992
++#include "G992Main.gh"
++#endif
++
++#include "SoftDslSampleBuffers.gh"
++#endif
++
++typedef struct __dslSlowVarsStruct
++ {
++ int tmp;
++ }
++ dslSlowVarsStruct;
++
++typedef struct __dslVarsStruct
++ {
++ bitMap setup;
++ eyeHandlerType eyeHandlerPtr;
++ logHandlerType logHandlerPtr;
++ dslDriverCallbackType driverCallback;
++
++ rcvHandlerType rcvHandlerPtr;
++ xmtHandlerType xmtHandlerPtr;
++
++#ifndef ADSLCORE_ONLY
++ dslCommandHandlerType adslCoreCommandHandlerPtr;
++#endif
++ dslCommandHandlerType dataPumpCommandHandlerPtr;
++
++ dslStatusHandlerType internalStatusHandlerPtr;
++ dslStatusHandlerType externalStatusHandlerPtr;
++#ifndef ADSLCORE_ONLY
++ dslStatusHandlerType externalLinkLayerStatusHandlerPtr;
++#endif
++
++ dslDirectionType direction;
++ dslConnectionSetupStruct connectionSetup;
++
++#ifdef NEC_NSIF_WORKAROUND
++ uchar G994NsStatus;
++ uchar G994NsFailCounter;
++#endif
++
++ dslFrameHandlerType rxIndicateHandlerPtr;
++ dslFrameHandlerType txCompleteHandlerPtr;
++
++ linkLayerFunctions LinkLayerFunctions;
++ dslSlowVarsStruct *dslSlowVars;
++
++#ifdef DSL_FRAME_FUNCTIONS
++ dslFrameFunctions DslFrameFunctions;
++#endif
++ ulong refData;
++ ulong execTime;
++ int currRcvNSamps;
++
++#ifndef HOST_ONLY
++ DslSampleBuffersStruct sampleBuffersVars;
++
++#ifdef G992P2_PROFILE
++ G992p2ProfileVarsStruct G992p2ProfileVars;
++#endif
++
++#ifdef ADSL_FRAMER
++ muxFramerVarsStruct muxFramerVars;
++#endif
++#endif /* HOST_ONLY */
++
++#ifdef DSL_LINKLAYER
++ union
++ {
++#ifdef ATM
++ atmVarsStruct atmVars;
++#endif
++#ifdef DSL_PACKET
++ dslPacketVarsStruct dslPacketVars;
++#endif
++ } linkLayerVars;
++#endif
++
++#ifdef G997_1_FRAMER
++ g997VarsStruct G997Vars;
++#ifdef G992P3
++ g992p3OvhMsgVarsStruct G992p3OvhMsgVars;
++#endif
++#endif
++
++#ifdef ADSL_MIB
++ adslMibVarsStruct adslMibVars;
++#endif
++
++#ifndef HOST_ONLY
++ union
++ {
++#ifdef T1P413
++ T1p413VarsStruct T1p413Vars;
++#endif
++#ifdef G994P1
++ G994p1VarsStruct G994p1Vars;
++#endif
++#ifdef G992
++ G992VarsStruct G992Vars;
++#endif
++ } physicalLayerVars;
++ union
++ {
++#ifdef G992
++ G992ScratchVarsStruct G992ScratchVars;
++#endif
++#if defined(ADSL_FRAMER) && defined(SHARE_MUX_FRAMER_VARS)
++ muxFramerSharedVarsStruct muxFramerSharedVars;
++#endif
++ } scratchVars;
++#endif /* HOST_ONLY */
++
++ }
++ dslVarsStruct;
++
++#ifndef GLOBAL_PTR_BIAS
++#define gDslGlobalVarPtr ((struct __dslVarsStruct *)gDslVars)
++#define gDslGlobalSlowVarPtr (gDslGlobalVarPtr->dslSlowVars)
++#else
++#define gDslGlobalVarPtr ((struct __dslVarsStruct *) (void*)((uchar*)(gDslVars) - GLOBAL_PTR_BIAS))
++#define gDslGlobalSlowVarPtr ((struct __dslSlowVarsStruct *) (void*)((uchar*)(gDslGlobalVarPtr->dslSlowVars) - GLOBAL_PTR_BIAS))
++#endif
++
++#define gDslSampleBuffersVars (gDslGlobalVarPtr->sampleBuffersVars)
++
++#define gDslMuxFramerVars (gDslGlobalVarPtr->muxFramerVars)
++#define gDslMuxFramerSharedVars (gDslGlobalVarPtr->scratchVars.muxFramerSharedVars)
++#define gDslLinkLayerVars (gDslGlobalVarPtr->linkLayerVars)
++#define gDslAtmVars (gDslGlobalVarPtr->linkLayerVars.atmVars)
++#define gDslPacketVars (gDslGlobalVarPtr->linkLayerVars.dslPacketVars)
++#define gG997Vars (gDslGlobalVarPtr->G997Vars)
++
++#ifdef G992P3
++#define gG992p3OvhMsgVars (gDslGlobalVarPtr->G992p3OvhMsgVars)
++#endif
++
++#define gAdslMibVars (gDslGlobalVarPtr->adslMibVars)
++
++#define gT1p413Vars (gDslGlobalVarPtr->physicalLayerVars.T1p413Vars)
++#define gG994p1Vars (gDslGlobalVarPtr->physicalLayerVars.G994p1Vars)
++#define gG992Vars (gDslGlobalVarPtr->physicalLayerVars.G992Vars)
++#define gG992p2ProfileVars (gDslGlobalVarPtr->G992p2ProfileVars)
++
++#define gG992ScratchVars (gDslGlobalVarPtr->scratchVars.G992ScratchVars)
++
++#ifndef gEyeHandlerPtr
++#define gEyeHandlerPtr (gDslGlobalVarPtr->eyeHandlerPtr)
++#endif
++
++#ifndef gLogHandlerPtr
++#define gLogHandlerPtr (gDslGlobalVarPtr->logHandlerPtr)
++#endif
++
++#ifdef VP_SIMULATOR
++#define gDriverCallback(x) (gDslGlobalVarPtr->driverCallback)(x)
++#else
++#define gDriverCallback(x)
++#endif
++
++/*
++**
++** Frame functions callouts
++**
++*/
++
++#define gDslFrameFunc (gDslGlobalVarPtr->DslFrameFunctions)
++
++#define DslFrameBufferGetLength(gDslVars, fb) \
++ gDslFrameFunc.__DslFrameBufferGetLength(fb)
++
++#define DslFrameBufferGetAddress(gDslVars, fb) \
++ gDslFrameFunc.__DslFrameBufferGetAddress(fb)
++
++#define DslFrameBufferSetLength(gDslVars, fb, l) \
++ gDslFrameFunc.__DslFrameBufferSetLength(fb, l)
++
++#define DslFrameBufferSetAddress(gDslVars, fb, p) \
++ gDslFrameFunc.__DslFrameBufferSetAddress(fb, p)
++
++#define DslFrameInit(gDslVars, f) \
++ gDslFrameFunc.__DslFrameInit(f)
++
++#define DslFrameGetLength(gDslVars, pFrame) \
++ gDslFrameFunc.__DslFrameGetLength(pFrame)
++
++#define DslFrameGetBufCnt(gDslVars, pFrame) \
++ gDslFrameFunc.__DslFrameGetBufCnt(pFrame)
++
++#define DslFrameGetFirstBuffer(gDslVars, pFrame) \
++ gDslFrameFunc.__DslFrameGetFirstBuffer(pFrame)
++
++#define DslFrameGetNextBuffer(gDslVars, pFrBuffer) \
++ gDslFrameFunc.__DslFrameGetNextBuffer(pFrBuffer)
++
++#define DslFrameSetNextBuffer(gDslVars, pFrBuf, pFrBufNext) \
++ gDslFrameFunc.__DslFrameSetNextBuffer(pFrBuf, pFrBufNext)
++
++#define DslFrameGetLastBuffer(gDslVars, pFrame) \
++ gDslFrameFunc.__DslFrameGetLastBuffer(pFrame)
++
++#define DslFrameGetLinkFieldAddress(gDslVars, f) \
++ gDslFrameFunc.__DslFrameGetLinkFieldAddress(f)
++
++#define DslFrameGetFrameAddressFromLink(gDslVars, lnk) \
++ gDslFrameFunc.__DslFrameGetFrameAddressFromLink(lnk)
++
++
++#define DslFrameGetOobInfo(gDslVars, f, pOobInfo) \
++ gDslFrameFunc.__DslFrameGetOobInfo(f, pOobInfo)
++
++#define DslFrameSetOobInfo(gDslVars, f, pOobInfo) \
++ gDslFrameFunc.__DslFrameSetOobInfo(f, pOobInfo)
++
++
++#define DslFrameEnqueBufferAtBack(gDslVars, f, b) \
++ gDslFrameFunc.__DslFrameEnqueBufferAtBack(f, b)
++
++#define DslFrameEnqueFrameAtBack(gDslVars, fMain, f) \
++ gDslFrameFunc.__DslFrameEnqueFrameAtBack(fMain, f)
++
++#define DslFrameEnqueBufferAtFront(gDslVars, f, b) \
++ gDslFrameFunc.__DslFrameEnqueBufferAtFront(f, b)
++
++#define DslFrameEnqueFrameAtFront(gDslVars, fMain, f) \
++ gDslFrameFunc.__DslFrameEnqueFrameAtFront(fMain, f)
++
++#define DslFrameDequeBuffer(gDslVars, pFrame) \
++ gDslFrameFunc.__DslFrameDequeBuffer(pFrame)
++
++#define DslFrameAllocMemForFrames(gDslVars, frameNum) \
++ gDslFrameFunc.__DslFrameAllocMemForFrames(frameNum)
++
++#define DslFrameFreeMemForFrames(gDslVars, hMem) \
++ gDslFrameFunc.__DslFrameFreeMemForFrames(hMem)
++
++#define DslFrameAllocFrame(gDslVars, handle) \
++ gDslFrameFunc.__DslFrameAllocFrame(handle)
++
++#define DslFrameFreeFrame(gDslVars, handle, pFrame) \
++ gDslFrameFunc.__DslFrameFreeFrame(handle, pFrame)
++
++#define DslFrameAllocMemForBuffers(gDslVars, ppMemPool, bufNum, memSize) \
++ gDslFrameFunc.__DslFrameAllocMemForBuffers(ppMemPool, bufNum, memSize)
++
++#define DslFrameFreeMemForBuffers(gDslVars, hMem, memSize, pMemPool) \
++ gDslFrameFunc.__DslFrameFreeMemForBuffers(hMem, memSize, pMemPool)
++
++#define DslFrameAllocBuffer(gDslVars, handle, pMem, length) \
++ gDslFrameFunc.__DslFrameAllocBuffer(handle, pMem, length)
++
++#define DslFrameFreeBuffer(gDslVars, handle, pBuf) \
++ gDslFrameFunc.__DslFrameFreeBuffer(handle, pBuf)
++
++#define DslFrame2Id(gDslVars, handle, pFrame) \
++ gDslFrameFunc.__DslFrame2Id(handle, pFrame)
++
++#define DslFrameId2Frame(gDslVars, handle, frameId) \
++ gDslFrameFunc.__DslFrameId2Frame (handle, frameId)
++
++
++#endif /* SoftDslGlobals */
+diff -urN linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/SoftDsl.h linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/SoftDsl.h
+--- linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/SoftDsl.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/SoftDsl.h 2006-06-26 09:07:10.000000000 +0200
+@@ -0,0 +1,2920 @@
++/****************************************************************************
++ *
++ * SoftDsl.h
++ *
++ *
++ * Description:
++ * This file contains the exported interface for SoftDsl.c
++ *
++ *
++ * Copyright (c) 1993-1998 AltoCom, Inc. All rights reserved.
++ * Authors: Ilya Stomakhin
++ *
++ * $Revision: 1.275 $
++ *
++ * $Id: SoftDsl.h,v 1.275 2005/04/28 22:55:36 ilyas Exp $
++ *
++ * $Log: SoftDsl.h,v $
++ * Revision 1.275 2005/04/28 22:55:36 ilyas
++ * Cleaned up kDslG992RunAnnexaP3ModeInAnnexaP5, kG992EnableAnnexM and kDslAtuChangeTxFilterRequest definitions
++ *
++ * Revision 1.274 2005/04/27 20:57:32 yongbing
++ * Implement 32 frequency break points for TSSI, PR 30211
++ *
++ * Revision 1.273 2005/04/02 03:27:52 kdu
++ * PR30236: Define kDslEnableRoundUpDSLoopAttn, this is shared with kDslCentilliumCRCWorkAroundEnabled.
++ *
++ * Revision 1.272 2005/04/01 21:56:39 ilyas
++ * Added more test commands definitions
++ *
++ * Revision 1.271 2005/02/11 05:03:57 ilyas
++ * Added support for DslOs
++ *
++ * Revision 1.270 2005/02/11 03:33:22 lke
++ * Support 2X, 4X, and 8X spectrum in ANNEX_I DS
++ *
++ * Revision 1.269 2005/01/08 00:11:58 ilyas
++ * Added definition for AnnexL status
++ *
++ * Revision 1.268 2004/12/18 00:52:35 mprahlad
++ * Add Dig US Pwr cutback status
++ *
++ * Revision 1.267 2004/11/08 22:21:38 ytan
++ * init swap state after retrain
++ *
++ * Revision 1.266 2004/11/05 21:16:50 ilyas
++ * Added support for pwmSyncClock
++ *
++ * Revision 1.265 2004/10/28 20:05:17 gsyu
++ * Fixed compilation errors for simulation targets
++ *
++ * Revision 1.264 2004/10/23 00:16:35 nino
++ * Added kDslHardwareSetRcvAGC status to set absolute rcv agc gain.
++ *
++ * Revision 1.263 2004/10/22 21:21:06 ilyas
++ * Fixed bit definition overlap in demodCapabilities
++ *
++ * Revision 1.262 2004/10/20 00:43:20 gsyu
++ * Added constants to support new xmt sample buffer control scheme
++ *
++ * Revision 1.261 2004/10/12 01:09:28 nino
++ * Remove kDslHardwareEnablePwmSyncClk and kDslHardwareSetPwmSyncClkFreq
++ * status definitions. Add kDslEnablePwmSyncClk and kDslSetPwmSyncClkFreq
++ * command definitions.
++ *
++ * Revision 1.260 2004/10/11 20:21:26 nino
++ * Added kDslHardwareEnablePwmSyncClk and kDslHardwareSetPwmSynClkFreq hardware statuses.
++ *
++ * Revision 1.259 2004/10/07 19:17:29 nino
++ * Added kDslHardwareGetRcvAGC status.
++ *
++ * Revision 1.258 2004/10/02 00:17:14 nino
++ * Added kDslHardwareAGCSetPga2 and kDslSetPilotEyeDisplay status definitions.
++ *
++ * Revision 1.257 2004/08/27 01:00:30 mprahlad
++ *
++ * Keep kDslAtuChangeTxFilterRequest defined by default so ADSL1 only targets can
++ * build
++ *
++ * Revision 1.256 2004/08/20 19:00:34 ilyas
++ * Added power management code for 2+
++ *
++ * Revision 1.255 2004/08/17 23:18:25 kdu
++ * Merged interop changes for TDC lab from a023e9.
++ *
++ * Revision 1.254 2004/07/22 00:56:03 yongbing
++ * Add ADSL2 Annex B modulation definition
++ *
++ * Revision 1.253 2004/07/16 22:23:28 nino
++ * - Defined macros to extract subcarrier and supported set information
++ * for tssi. Subcarrier and suported set indicator is packed into
++ * dsSubcarrier index array.
++ *
++ * Revision 1.252 2004/07/01 00:11:22 nino
++ * Added preliminary code for debugDataHandler (inside of #if DEBUG_DATA_HANDLER).
++ *
++ * Revision 1.251 2004/06/24 03:08:39 ilyas
++ * Added GFC mapping control for ATM bonding
++ *
++ * Revision 1.250 2004/06/23 00:03:20 khp
++ * - shorten self test result register length to 1 (satisfied requirement
++ * at DT, no known requirement anywhere else)
++ *
++ * Revision 1.249 2004/06/15 20:18:33 ilyas
++ * Made D uchar again for compatibility with older ADSl drivers that use this structure. ADSL driver will rely on G992p3 parameters for large D
++ *
++ * Revision 1.248 2004/06/12 00:26:03 gsyu
++ * Added constants for AnnexM
++ *
++ * Revision 1.247 2004/06/10 18:53:24 yjchen
++ * add large D support
++ *
++ * Revision 1.246 2004/06/04 01:55:00 linyin
++ * Add a constant for SRA enable/disable
++ *
++ * Revision 1.245 2004/05/19 23:22:23 linyin
++ * Support L2
++ *
++ * Revision 1.244 2004/05/15 03:04:58 ilyas
++ * Added L3 test definition
++ *
++ * Revision 1.243 2004/05/14 03:04:38 ilyas
++ * Fixed structure name typo
++ *
++ * Revision 1.242 2004/05/14 02:01:01 ilyas
++ * Fixed structure name typo
++ *
++ * Revision 1.241 2004/05/14 01:21:49 nino
++ * Added kDslSignalAttenuation, kDslAttainableNetDataRate kDslHLinScale constant definitions.
++ *
++ * Revision 1.240 2004/05/13 19:07:58 ilyas
++ * Added new statuses for ADSL2
++ *
++ * Revision 1.239 2004/05/01 01:09:51 ilyas
++ * Added power management command and statuses
++ *
++ * Revision 1.238 2004/04/23 22:50:38 ilyas
++ * Implemented double buffering to ensure G.997 HDLC frame (OvhMsg) is continuous
++ *
++ * Revision 1.237 2004/03/31 18:57:39 ilyas
++ * Added drop on data error capability control
++ *
++ * Revision 1.236 2004/03/30 03:11:30 ilyas
++ * Added #ifdef for CFE build
++ *
++ * Revision 1.235 2004/03/29 23:06:39 ilyas
++ * Added status for BG table update
++ *
++ * Revision 1.234 2004/03/17 02:49:49 ilyas
++ * Turn off ATM bit reversal for Alcatel DSLAM only
++ *
++ * Revision 1.233 2004/03/11 03:09:48 mprahlad
++ * Add test mode for afeloopback test
++ *
++ * Revision 1.232 2004/03/10 23:15:53 ilyas
++ * Added ETSI modem support
++ *
++ * Revision 1.231 2004/03/04 19:28:14 linyin
++ * Support adsl2plus
++ *
++ * Revision 1.230 2004/02/28 00:06:21 ilyas
++ * Added OLR message definitions for ADSL2+
++ *
++ * Revision 1.229 2004/02/13 03:21:15 mprahlad
++ * define kDslAturHwAgcMaxGain correctly for 6348
++ *
++ * Revision 1.228 2004/02/09 05:06:17 yongbing
++ * Add ADSL2 bit swap function
++ *
++ * Revision 1.227 2004/02/04 02:08:19 linyin
++ * remove the redefined kG992p5AnnexA
++ *
++ * Revision 1.226 2004/02/04 01:41:48 linyin
++ * Add some variables for G992P5
++ *
++ * Revision 1.225 2004/02/03 19:12:22 gsyu
++ * Added a dedicate structure and constants for G992P5
++ *
++ * Revision 1.224 2004/01/24 01:18:34 ytan
++ * add multi-section swapping flag
++ *
++ * Revision 1.223 2004/01/17 00:21:48 ilyas
++ * Added commands and statuses for OLR
++ *
++ * Revision 1.222 2004/01/13 19:12:37 gsyu
++ * Added more constants for Double upstream
++ *
++ * Revision 1.221 2003/12/23 21:19:04 mprahlad
++ * Define BCM6348_TEMP_MOVE_TO_LMEM to FAST_TEXT for 6348 targets - this is for
++ * ADSL2/AnnexA multimode builds - move a few functions to Lmem for now to avoid
++ * changes for swap on 6348.
++ *
++ * Revision 1.220 2003/12/19 21:21:53 ilyas
++ * Added dying gasp support for ADSL2
++ *
++ * Revision 1.219 2003/12/05 02:09:51 mprahlad
++ * Leave the AnalogEC defs in - saves ifdef-ing all uses of these defines.
++ * Include Bcm6345_To_Bcm6348.h - to be able to pick up macros for the
++ * transition
++ *
++ * Revision 1.218 2003/12/04 02:10:58 linyin
++ * Redefine some constants for supporting different pilot and TTR
++ *
++ * Revision 1.217 2003/12/03 02:24:39 gsyu
++ * Reverse previous check in for Double Upstream demo
++ *
++ * Revision 1.215 2003/11/20 00:58:47 yongbing
++ * Merge ADSL2 functionalities into Annex A branch
++ *
++ * Revision 1.214 2003/11/06 00:35:06 nino
++ * Added kDslWriteAfeRegCmd and kDslReadAfeRegCmd commands.
++ *
++ * Revision 1.213 2003/11/05 21:04:23 ilyas
++ * Added more codes for LOG data
++ *
++ * Revision 1.212 2003/10/22 00:51:52 yjchen
++ * define constant for quiet line noise
++ *
++ * Revision 1.211 2003/10/20 22:08:57 nino
++ * Added kDslSetRcvGainCmd and kDslBypassRcvHpfCmd debug commands.
++ *
++ * Revision 1.210 2003/10/18 00:04:59 yjchen
++ * define constants for G992P3 diagnostic mode channel response
++ *
++ * Revision 1.209 2003/10/17 22:41:29 yongbing
++ * Add INP message support
++ *
++ * Revision 1.208 2003/10/16 00:06:09 uid1249
++ * Moved G.994 definitions from G.994p1MainTypes.h
++ *
++ * Revision 1.207 2003/10/15 20:45:11 linyin
++ * Add some constants for support Revision 2
++ *
++ * Revision 1.206 2003/10/14 22:04:02 ilyas
++ * Added Nino's AFE statuses for 6348
++ *
++ * Revision 1.205 2003/10/10 18:49:26 gsyu
++ * Added test modes to workaround the clock domain crossing bug, PR18038
++ *
++ * Revision 1.204 2003/09/30 19:27:46 mprahlad
++ * ifdef AnalogEC definies with #ifndef BCM6348_SRC
++ *
++ * Revision 1.203 2003/09/26 19:36:34 linyin
++ * Add annexi constant and vars
++ *
++ * Revision 1.202 2003/09/25 20:16:13 yjchen
++ * remove featureNTR definition
++ *
++ * Revision 1.201 2003/09/08 20:29:51 ilyas
++ * Added test commands for chip regression tests
++ *
++ * Revision 1.200 2003/08/26 00:58:14 ilyas
++ * Added I432 reset command (for header compression)
++ * Fixed SoftDsl time (for I432 header compression)
++ *
++ * Revision 1.199 2003/08/26 00:37:29 ilyas
++ * #ifdef'ed DslFrameFunctions in dslCommand structure to save space
++ *
++ * Revision 1.198 2003/08/22 22:45:00 liang
++ * Change the NF field in G992CodingParams from uchar to ushort to support K=256 (dataRate=255*32kbps) in fast path.
++ *
++ * Revision 1.197 2003/08/21 21:19:05 ilyas
++ * Changed dataPumpCapabilities structure for G992P3
++ *
++ * Revision 1.196 2003/08/12 22:44:28 khp
++ * - for Haixiang: added kDslTestMarginTweak command and marginTweakSpec
++ *
++ * Revision 1.195 2003/07/24 17:28:16 ovandewi
++ * added Tx filter change request code
++ *
++ * Revision 1.194 2003/07/24 15:48:55 yongbing
++ * Reduce TSSI buffer size to avoid crash at the beginning of G.994.1. Need to find out why
++ *
++ * Revision 1.193 2003/07/19 07:11:47 nino
++ * Revert back to version 1.191.
++ *
++ * Revision 1.191 2003/07/17 21:25:25 yongbing
++ * Add support for READSL2 and TSSI
++ *
++ * Revision 1.190 2003/07/14 19:42:33 yjchen
++ * add constants for G992P3
++ *
++ * Revision 1.189 2003/07/10 23:07:11 liang
++ * Add demodCapability bit to minimize showtime ATUC xmt power through b&g table.
++ *
++ * Revision 1.188 2003/07/08 22:18:50 liang
++ * Added demodCapability bit for G.994.1 Annex A multimode operation.
++ *
++ * Revision 1.187 2003/07/07 23:24:43 ilyas
++ * Added G.dmt.bis definitions
++ *
++ * Revision 1.186 2003/06/25 02:44:02 liang
++ * Added demod capability bit kDslUE9000ADI918FECFixEnabled.
++ * Added back kDslHWEnableAnalogECUpdate & kDslHWEnableAnalogEC for backward compatibility (annex A).
++ *
++ * Revision 1.185 2003/06/18 01:39:19 ilyas
++ * Added AFE test commands. Add #defines for driver's builds
++ *
++ * Revision 1.184 2003/06/06 23:58:09 ilyas
++ * Added command and status for standalone AFE tests
++ *
++ * Revision 1.183 2003/05/29 21:09:32 nino
++ * - kDslHWEnableAnalogECUpdate define replaced with kDslHWSetDigitalEcUpdateMode
++ * - kDslHWEnableAnalogEC define replaced with kDslHWDisableDigitalECUpdate
++ *
++ * Revision 1.182 2003/04/15 22:08:15 liang
++ * Changed one of the demodCapability bit name from last checkin.
++ *
++ * Revision 1.181 2003/04/13 19:25:54 liang
++ * Added three more demodCapability bits.
++ *
++ * Revision 1.180 2003/04/02 02:09:17 liang
++ * Added demodCapability bit for ADI low rate option fix disable.
++ *
++ * Revision 1.179 2003/03/18 18:22:06 yongbing
++ * Use 32 tap TEQ for Annex I
++ *
++ * Revision 1.178 2003/03/06 00:58:07 ilyas
++ * Added SetStausBuffer command
++ *
++ * Revision 1.177 2003/02/25 00:46:26 ilyas
++ * Added T1.413 EOC vendor ID
++ *
++ * Revision 1.176 2003/02/21 23:30:54 ilyas
++ * Added Xmtgain command framing mode status and T1413VendorId parameters
++ *
++ * Revision 1.175 2003/02/07 22:13:55 liang
++ * Add demodCapabilities bits for sub-sample alignment and higher T1.413 level (used internally only).
++ *
++ * Revision 1.174 2003/01/23 02:54:07 liang
++ * Added demod capability bit for bitswap enable.
++ *
++ * Revision 1.173 2002/12/13 18:36:33 yongbing
++ * Add support for G.992.2 Annex C
++ *
++ * Revision 1.172 2002/12/10 23:27:12 ilyas
++ * Extended dslException parameter structure to allow printout from DslDiags
++ *
++ * Revision 1.171 2002/12/06 02:10:19 liang
++ * Moved the T1.413 RAck1/RAck2 switching variables to connection setup structure.
++ * Added/Modified the training progress codes for T1.413 RAck1/RAck2 and upstream 2x IFFT disable.
++ *
++ * Revision 1.170 2002/11/11 00:20:05 liang
++ * Add demod capability constant for internally disabling upstream 2x IFFT in T1.413 mode.
++ *
++ * Revision 1.169 2002/11/06 03:46:19 liang
++ * Add training progress code for upstream 2x IFFT disable.
++ *
++ * Revision 1.168 2002/11/01 01:41:06 ilyas
++ * Added flags for Centillium 4103 workarround
++ *
++ * Revision 1.167 2002/10/26 01:26:11 gsyu
++ * Move SoftDslLineHandler from SDRAM to LMEM
++ *
++ * Revision 1.166 2002/10/20 18:56:20 khp
++ * - for linyin
++ * - #ifdef NEC_NSIF_WORKAROUND:
++ * - add macros to extract NSIF status and fail counter vars
++ *
++ * Revision 1.165 2002/10/14 05:24:35 liang
++ * Add training status code to request alternate xmt filter (for Samsung 6-port ADI918 DSLAMs) to meet KT 2km spec.
++ *
++ * Revision 1.164 2002/10/08 21:44:50 ilyas
++ * Fixed EOC stuffing byte to indicate "no synchronization" action
++ *
++ * Revision 1.163 2002/10/03 19:34:24 ilyas
++ * Added size for EOC serial number register
++ *
++ * Revision 1.162 2002/09/28 02:42:27 yongbing
++ * Add retrain in T1.413 with R-Ack1 tone
++ *
++ * Revision 1.161 2002/09/28 01:23:35 gsyu
++ * Reverse us2xifft change so that we can install new us2xifft on the tree
++ *
++ * Revision 1.160 2002/09/26 23:30:48 yongbing
++ * Add synch symbol detection in Showtime
++ *
++ * Revision 1.159 2002/09/20 23:47:52 khp
++ * - for gsyu: enable 2X IFFT for Annex A (XMT_FFT_SIZE_2X)
++ *
++ * Revision 1.158 2002/09/14 03:26:39 ilyas
++ * Changed far-end RDI reporting
++ *
++ * Revision 1.157 2002/09/13 21:10:54 ilyas
++ * Added reporting of remote modem LOS and RDI.
++ * Moved G992CodingParams definition to SoftDsl.h
++ *
++ * Revision 1.156 2002/09/12 21:07:19 ilyas
++ * Added HEC, OCD and LCD counters
++ *
++ * Revision 1.155 2002/09/09 21:31:30 linyin
++ * Add two constant to support long reach
++ *
++ * Revision 1.154 2002/09/07 01:31:51 ilyas
++ * Added support for OEM parameters
++ *
++ * Revision 1.153 2002/09/04 22:36:14 mprahlad
++ * defines for non standard info added
++ *
++ * Revision 1.152 2002/08/02 21:59:09 liang
++ * Enable G.992.2 carrierInfo in capabitilities when G.992.1 annex A is used for G.992.2.
++ *
++ * Revision 1.151 2002/07/29 20:01:03 ilyas
++ * Added command for Atm VC map table change
++ *
++ * Revision 1.150 2002/07/18 22:30:47 liang
++ * Add xmt power and power cutback related constants.
++ *
++ * Revision 1.149 2002/07/11 01:30:58 ilyas
++ * Changed status for ShowtimeMargin reporting
++ *
++ * Revision 1.148 2002/07/09 19:19:09 ilyas
++ * Added status parameters for ShowtimeSNRMargin info and command to filter
++ * out SNR margin data
++ *
++ * Revision 1.147 2002/06/27 21:50:24 liang
++ * Added test command related demodCapabilities bits.
++ *
++ * Revision 1.146 2002/06/26 21:29:00 liang
++ * Added dsl test cmd structure and showtime margin connection info status.
++ *
++ * Revision 1.145 2002/06/15 05:15:51 ilyas
++ * Added definitions for Ping, Dying Gasp and other test commands
++ *
++ * Revision 1.144 2002/05/30 19:55:15 ilyas
++ * Added status for ADSL PHY MIPS exception
++ * Changed conflicting definition for higher rates (S=1/2)
++ *
++ * Revision 1.143 2002/05/21 23:41:07 yongbing
++ * First check-in of Annex C S=1/2 codes
++ *
++ * Revision 1.142 2002/04/29 22:25:09 georgep
++ * Merge from branch annexC_demo - add status message constants
++ *
++ * Revision 1.141 2002/04/18 19:00:35 ilyas
++ * Added include file for builds in CommEngine environment
++ *
++ * Revision 1.140 2002/04/18 00:18:36 yongbing
++ * Add detailed timeout error messages
++ *
++ * Revision 1.139 2002/04/02 10:03:18 ilyas
++ * Merged BERT from AnnexA branch
++ *
++ * Revision 1.138 2002/03/26 01:42:29 ilyas
++ * Added timeout message constants for annex C
++ *
++ * Revision 1.137 2002/03/22 19:39:22 yongbing
++ * Modify for co-exist of G994P1 and T1P413
++ *
++ * Revision 1.136 2002/03/22 01:19:40 ilyas
++ * Add status message constants for total FEXT Bits, NEXT bits
++ *
++ * Revision 1.135 2002/03/10 22:32:24 liang
++ * Added report constants for LOS recovery and timing tone index.
++ *
++ * Revision 1.134 2002/03/07 22:06:32 georgep
++ * Replace ifdef G992P1 with G992P1_ANNEX_A for annex A variables
++ *
++ * Revision 1.133 2002/02/16 01:08:18 georgep
++ * Add log constant for showtime mse
++ *
++ * Revision 1.132 2002/02/08 04:36:27 ilyas
++ * Added commands for LOG file and fixed Idle mode pointer update
++ *
++ * Revision 1.131 2002/01/24 20:21:30 georgep
++ * Add logging defines, remove fast retrain defines
++ *
++ * Revision 1.130 2002/01/19 23:59:17 ilyas
++ * Added support for LOG and eye data to ADSL core target
++ *
++ * Revision 1.129 2002/01/16 23:43:54 liang
++ * Remove the carriage return character from last checkin.
++ *
++ * Revision 1.128 2002/01/15 22:27:13 ilyas
++ * Added command for ADSL loopback
++ *
++ * Revision 1.127 2002/01/10 07:18:22 ilyas
++ * Added status for printf (mainly for ADSL core debugging)
++ *
++ * Revision 1.126 2001/12/21 22:45:34 ilyas
++ * Added support for ADSL MIB data object
++ *
++ * Revision 1.125 2001/12/13 02:24:22 ilyas
++ * Added G997 (Clear EOC and G997 framer) support
++ *
++ * Revision 1.124 2001/11/30 05:56:31 liang
++ * Merged top of the branch AnnexBDevelopment onto top of the tree.
++ *
++ * Revision 1.123 2001/11/15 19:01:07 yongbing
++ * Modify only T1.413 part to the top of tree based on AnnexBDevelopment branch
++ *
++ * Revision 1.122 2001/10/19 00:12:07 ilyas
++ * Added support for frame oriented (no ATM) data link layer
++ *
++ * Revision 1.121 2001/10/09 22:35:13 ilyas
++ * Added more ATM statistics and OAM support
++ *
++ * Revision 1.105.2.20 2001/11/27 02:32:03 liang
++ * Combine vendor ID, serial #, and version number into SoftModemVersionNumber.c.
++ *
++ * Revision 1.105.2.19 2001/11/21 01:29:14 georgep
++ * Add a status message define for annexC
++ *
++ * Revision 1.105.2.18 2001/11/08 23:26:28 yongbing
++ * Add carrier selection function for Annex A and B
++ *
++ * Revision 1.105.2.17 2001/11/07 22:55:30 liang
++ * Report G992 rcv msg CRC error as what it is instead of time out.
++ *
++ * Revision 1.105.2.16 2001/11/05 19:56:21 liang
++ * Add DC offset info code.
++ *
++ * Revision 1.105.2.15 2001/10/16 00:47:16 yongbing
++ * Add return-to-T1p413 starting point if in error
++ *
++ * Revision 1.105.2.14 2001/10/15 23:14:01 yjchen
++ * remove ADSL_SINGLE_SYMBOL_BLOCK
++ *
++ * Revision 1.105.2.13 2001/10/12 18:07:16 yongbing
++ * Add support for T1.413
++ *
++ * Revision 1.105.2.12 2001/10/04 00:23:52 liang
++ * Add connection info constants for TEQ coef and PSD.
++ *
++ * Revision 1.105.2.11 2001/10/03 01:44:01 liang
++ * Merged with codes from main tree (tag SoftDsl_2_18).
++ *
++ * Revision 1.105.2.10 2001/09/28 22:10:04 liang
++ * Add G994 exchange message status reports.
++ *
++ * Revision 1.105.2.9 2001/09/26 18:08:21 georgep
++ * Send status error message in case features field is not setup properly
++ *
++ * Revision 1.105.2.8 2001/09/05 01:58:13 georgep
++ * Added status message for annexC measured delay
++ *
++ * Revision 1.105.2.7 2001/08/29 00:37:52 georgep
++ * Add log constants for annexC
++ *
++ * Revision 1.105.2.6 2001/08/18 00:01:34 georgep
++ * Add constants for annexC
++ *
++ * Revision 1.105.2.5 2001/08/08 17:33:28 yongbing
++ * Merge with tag SoftDsl_2_17
++ *
++ * Revision 1.120 2001/08/29 02:56:01 ilyas
++ * Added tests for flattening/unflatenning command and statuses (dual mode)
++ *
++ * Revision 1.119 2001/08/28 03:26:32 ilyas
++ * Added support for running host and adsl core parts separately ("dual" mode)
++ *
++ * Revision 1.118 2001/08/16 02:16:10 khp
++ * - mark functions with FAST_TEXT to reduce cycle counts for QPROC targets
++ * (replaces use of LMEM_INSN)
++ *
++ * Revision 1.117 2001/06/18 20:06:35 ilyas
++ * Added forward declaration of dslCommandStruc to avoid gcc warnings
++ *
++ * Revision 1.116 2001/06/18 19:49:36 ilyas
++ * Changes to include support for HOST_ONLY mode
++ *
++ * Revision 1.115 2001/06/01 22:00:33 ilyas
++ * Changed ATM PHY interface to accomodate UTOPIA needs
++ *
++ * Revision 1.114 2001/05/16 06:22:24 liang
++ * Added status reports for xmt & rcv prefix enable position.
++ *
++ * Revision 1.113 2001/05/02 20:34:32 georgep
++ * Added log constants for snr1 calculation
++ *
++ * Revision 1.112 2001/04/25 01:20:11 ilyas
++ *
++ * Don't use DSL frame functions if ATM_LAYER is not defined
++ *
++ * Revision 1.111 2001/04/17 21:13:00 georgep
++ * Define status constant kDslHWSetDigitalEcUpdateShift
++ *
++ * Revision 1.110 2001/04/16 23:38:36 georgep
++ * Add HW AGC constants for ATUR
++ *
++ * Revision 1.109 2001/04/06 23:44:53 georgep
++ * Added status constant for setting up digitalEcGainShift
++ *
++ * Revision 1.108 2001/03/29 05:58:34 liang
++ * Replaced the Aware compatibility codes with automatic detection codes.
++ *
++ * Revision 1.107 2001/03/25 06:11:22 liang
++ * Combined separate loop attenuation status for ATUR & ATUC into one status.
++ * Replace separate hardware AGC info status for ATUR & ATUC into hardware AGC
++ * request status and hardware AGC obtained status.
++ * Use store AGC command to save hardware AGC value instead of returning value
++ * from status report.
++ *
++ * Revision 1.106 2001/03/24 00:43:22 liang
++ * Report more checksum results (NumOfCalls, txSignal, rxSignal & eyeData).
++ *
++ * Revision 1.105 2001/03/16 23:57:31 georgep
++ * Added more loop attenuation reporting status constants
++ *
++ * Revision 1.104 2001/03/15 00:22:07 liang
++ * Back to version 1.101.
++ *
++ * Revision 1.103 2001/03/15 00:03:44 yjchen
++ * use kDslATURHardwareAGCInfo for AltoE14 AGC as well
++ *
++ * Revision 1.102 2001/03/14 23:10:56 yjchen
++ * add defns for AltoE14 AGC
++ *
++ * Revision 1.101 2001/03/08 23:31:34 georgep
++ * Added R, S, D, coding parameters to dslDataPumpCapabilities
++ *
++ * Revision 1.100 2001/02/10 03:03:09 ilyas
++ * Added one more DslFrame function
++ *
++ * Revision 1.99 2001/02/09 01:55:27 ilyas
++ * Added status codes and macros to support printing of AAL packets
++ *
++ * Revision 1.98 2001/01/30 23:28:10 georgep
++ * Added kDslDspControlStatus for handling changes to dsp params
++ *
++ * Revision 1.97 2001/01/12 01:17:18 georgep
++ * Added bit in demodCapabilities for analog echo cancellor
++ *
++ * Revision 1.96 2001/01/04 05:51:03 ilyas
++ * Added more dslStatuses
++ *
++ * Revision 1.95 2000/12/21 05:46:07 ilyas
++ * Added name for struct _dslFrame
++ *
++ * Revision 1.94 2000/12/13 22:04:39 liang
++ * Add Reed-Solomon coding enable bit in demodCapabilities.
++ *
++ * Revision 1.93 2000/11/29 20:42:02 liang
++ * Add defines for SNR & max achivable rate status and DEC enable demodCapabilities bit.
++ *
++ * Revision 1.92 2000/09/22 21:55:13 ilyas
++ * Added support for DSL + Atm physical layer only (I.432) simulations
++ *
++ * Revision 1.91 2000/09/10 09:20:53 lkaplan
++ * Improve interface for sending Eoc messages
++ *
++ * Revision 1.90 2000/09/08 19:37:58 lkaplan
++ * Added code for handling EOC messages
++ *
++ * Revision 1.89 2000/09/07 23:02:27 georgep
++ * Add HarwareAGC Bit to demod Capabilities
++ *
++ * Revision 1.88 2000/09/01 00:57:34 georgep
++ * Added Hardware AGC status defines
++ *
++ * Revision 1.87 2000/08/31 19:04:26 liang
++ * Added external reference for stack size requirement test functions.
++ *
++ * Revision 1.86 2000/08/24 23:16:46 liang
++ * Increased sample block size for noBlock.
++ *
++ * Revision 1.85 2000/08/23 18:34:39 ilyas
++ * Added XxxVcConfigure function
++ *
++ * Revision 1.84 2000/08/05 00:25:04 georgep
++ * Redefine sampling freq constants
++ *
++ * Revision 1.83 2000/08/03 14:04:00 liang
++ * Add hardware time tracking clock error reset code.
++ *
++ * Revision 1.82 2000/07/23 20:52:52 ilyas
++ * Added xxxFrameBufSetAddress() function for ATM framer layers
++ * Rearranged linkLayer functions in one structure which is passed as a
++ * parameter to xxxLinkLayerInit() function to be set there
++ *
++ * Revision 1.81 2000/07/18 20:03:24 ilyas
++ * Changed DslFrame functions definitions to macros,
++ * Removed gDslVars from their parameter list
++ *
++ * Revision 1.80 2000/07/17 21:08:15 lkaplan
++ * removed global pointer
++ *
++ * Revision 1.79 2000/06/21 20:38:44 georgep
++ * Added bit to demodCapabilities for HW_TIME_TRACKING
++ *
++ * Revision 1.78 2000/06/19 19:57:55 georgep
++ * Added constants for logging of HWResampler data
++ *
++ * Revision 1.77 2000/06/02 18:57:21 ilyas
++ * Added support for DSL buffers consisting of many ATM cells
++ *
++ * Revision 1.76 2000/05/27 02:19:28 liang
++ * G992MonitorParams structure is moved here, and Tx/Rx data handler type definitions changed.
++ *
++ * Revision 1.75 2000/05/15 18:17:21 liang
++ * Added statuses for sent and received frames
++ *
++ * Revision 1.74 2000/05/14 01:56:38 ilyas
++ * Added ATM cell printouts
++ *
++ * Revision 1.73 2000/05/09 23:00:26 ilyas
++ * Added ATM status messages, ATM timer, Tx frames flush on timeout
++ * Fixed a bug - adding flushed Tx frames to the list of free Rx frames
++ *
++ * Revision 1.72 2000/05/03 18:01:18 georgep
++ * Removed old function declarations for Eoc/Aoc
++ *
++ * Revision 1.71 2000/05/03 03:57:04 ilyas
++ * Added LOG file support for writing ATM data
++ *
++ * Revision 1.70 2000/05/02 00:04:36 liang
++ * Add showtime monitoring and message exchange info constants.
++ *
++ * Revision 1.69 2000/04/28 23:34:20 yongbing
++ * Add constants for reporting error events in performance monitoring
++ *
++ * Revision 1.68 2000/04/21 23:09:04 liang
++ * Added G992 time out training progress constant.
++ *
++ * Revision 1.67 2000/04/19 00:31:47 ilyas
++ * Added global SoftDsl functions for Vc, added OOB info functions
++ *
++ * Revision 1.66 2000/04/18 00:45:31 yongbing
++ * Add G.DMT new frame structure, define G992P1_NEWFRAME to enable, need ATM layer to work
++ *
++ * Revision 1.65 2000/04/15 01:48:34 georgep
++ * Added T1p413 status constants
++ *
++ * Revision 1.64 2000/04/13 08:36:22 yura
++ * Added SoftDslSetRefData, SoftDslGetRefData functions
++ *
++ * Revision 1.63 2000/04/13 05:42:35 georgep
++ * Added constant for T1p413
++ *
++ * Revision 1.62 2000/04/05 21:49:54 liang
++ * minor change.
++ *
++ * Revision 1.61 2000/04/04 04:16:06 liang
++ * Merged with SoftDsl_0_03 from old tree.
++ *
++ * Revision 1.65 2000/04/04 01:47:21 ilyas
++ * Implemented abstract dslFrame and dslFrameBuffer objects
++ *
++ * Revision 1.64 2000/04/01 08:12:10 yura
++ * Added preliminary revision of the SoftDsl driver architecture
++ *
++ * Revision 1.63 2000/04/01 02:55:33 georgep
++ * New defines for G992p2Profile Structure
++ *
++ * Revision 1.62 2000/04/01 00:50:36 yongbing
++ * Add initial version of new frame structure for full-rate
++ *
++ * Revision 1.61 2000/03/24 03:30:45 georgep
++ * Define new constant kDslUpstreamSamplingFreq
++ *
++ * Revision 1.60 2000/03/23 19:51:30 georgep
++ * Define new features bits for G992p1
++ *
++ * Revision 1.59 2000/03/18 01:28:41 georgep
++ * Changed connectionSetup to include G992p1 Capabilities
++ *
++ * Revision 1.58 2000/02/29 01:40:03 georgep
++ * Changed modulationtype defines to be the same as SPAR1 in G994p1
++ *
++ * Revision 1.57 1999/11/19 01:03:19 george
++ * Use Block Size 256 for single symbol Mode
++ *
++ * Revision 1.56 1999/11/18 02:37:43 george
++ * Porting to 16Bit
++ *
++ * Revision 1.55 1999/11/12 02:12:55 george
++ * Added status constant for reporting of profile channel matching calculation
++ *
++ * Revision 1.54 1999/11/11 19:19:42 george
++ * Porting to 16Bit Compiler
++ *
++ * Revision 1.53 1999/11/05 01:27:06 liang
++ * Add recovery-from-inpulse-noise progress report.
++ *
++ * Revision 1.52 1999/11/02 02:06:27 george
++ * Added SNRMargin training status value
++ *
++ * Revision 1.51 1999/10/27 23:02:03 wan
++ * Add G.994.1 setup in dslConnectionSetupStruct for setting up Initiation side
++ *
++ * Revision 1.50 1999/10/25 21:55:36 liang
++ * Renamed the constant for FEQ output error.
++ *
++ * Revision 1.49 1999/10/23 02:20:55 george
++ * Add debug data codes
++ *
++ * Revision 1.48 1999/10/19 23:59:06 liang
++ * Change line handler interface to work with nonsymmetric sampling freq.
++ *
++ * Revision 1.47 1999/10/09 01:38:04 george
++ * Define maxProfileNumber
++ *
++ * Revision 1.46 1999/10/07 23:30:51 wan
++ * Add G.994.1 Tone and Fast Retrain Recov detections in G.992p2 SHOWTIME and Fast Retrain
++ *
++ * Revision 1.45 1999/10/06 13:59:27 liang
++ * Escape to G994.1 should be done through status instead of command.
++ *
++ * Revision 1.44 1999/10/06 02:01:28 george
++ * Add kDslReturnToG994p1Cmd
++ *
++ * Revision 1.43 1999/09/30 19:29:58 george
++ * Add reporting constant for Fast Retrain
++ *
++ * Revision 1.42 1999/09/16 23:41:56 liang
++ * Added command for host forced retrain.
++ *
++ * Revision 1.41 1999/08/20 00:47:25 wan
++ * Add constants for Fast Retrain progress status
++ *
++ * Revision 1.40 1999/08/16 18:06:01 wan
++ * Add more reporting constants for Fast Retrain
++ *
++ * Revision 1.39 1999/08/12 00:18:10 wan
++ * Add several Fast Retrain Status constants
++ *
++ * Revision 1.38 1999/08/10 18:25:38 george
++ * Define constants used for Fast Retrain
++ *
++ * Revision 1.37 1999/07/31 01:47:43 george
++ * Add status constants for eoc/aoc
++ *
++ * Revision 1.36 1999/07/27 18:19:52 george
++ * declare aoc/eoc functions
++ *
++ * Revision 1.35 1999/07/19 22:44:47 george
++ * Add constants for G994p1 Message Exchange
++ *
++ * Revision 1.34 1999/07/16 02:03:03 liang
++ * Modified Dsl link layer command spec structure.
++ *
++ * Revision 1.33 1999/07/14 22:53:16 george
++ * Add Constants for G994p1
++ *
++ * Revision 1.32 1999/07/13 00:02:26 liang
++ * Added more feature bits.
++ *
++ * Revision 1.31 1999/07/09 01:58:14 wan
++ * Added more constants G.994.1 testing reports
++ *
++ * Revision 1.30 1999/07/07 23:51:04 liang
++ * Added rcv power and loop attenuation reports.
++ *
++ * Revision 1.29 1999/07/06 21:32:01 liang
++ * Added some aux. feature bits, and field performanceMargin was changed to noiseMargin in Capabilities.
++ *
++ * Revision 1.28 1999/07/03 01:40:17 liang
++ * Redefined dsl command parameter list and added connection setup struct.
++ *
++ * Revision 1.27 1999/07/02 00:41:18 liang
++ * Add bit and gain logging as well as rcv carrier range status.
++ *
++ * Revision 1.26 1999/06/25 21:37:10 wan
++ * Work in progress for G994.1.
++ *
++ * Revision 1.25 1999/06/16 00:54:36 liang
++ * Added Tx/Rx SHOWTIME active training progress codes.
++ *
++ * Revision 1.24 1999/06/11 21:59:37 wan
++ * Added G994.1 fail status constant.
++ *
++ * Revision 1.23 1999/06/11 21:29:01 liang
++ * Constants for C/R-Msgs was changed to C/R-Msg.
++ *
++ * Revision 1.22 1999/06/08 02:49:42 liang
++ * Added SNR data logging.
++ *
++ * Revision 1.21 1999/06/07 21:05:08 liang
++ * Added more training status values.
++ *
++ * Revision 1.20 1999/05/22 02:18:26 liang
++ * More constant defines.
++ *
++ * Revision 1.19 1999/05/14 22:49:35 liang
++ * Added more status codes and debug data codes.
++ *
++ * Revision 1.18 1999/04/12 22:41:39 liang
++ * Work in progress.
++ *
++ * Revision 1.17 1999/04/01 20:28:07 liang
++ * Added RReverb detect event status.
++ *
++ * Revision 1.16 1999/03/26 03:29:54 liang
++ * Add DSL debug data constants.
++ *
++ * Revision 1.15 1999/03/08 21:58:00 liang
++ * Added more constant definitions.
++ *
++ * Revision 1.14 1999/03/02 01:49:36 liang
++ * Added more connection info codes.
++ *
++ * Revision 1.13 1999/03/02 00:25:55 liang
++ * Added DSL tx and rx data handler type definitions.
++ *
++ * Revision 1.12 1999/02/27 01:16:55 liang
++ * Increase allowable static memory size to a VERY large number for now.
++ *
++ * Revision 1.11 1999/02/25 00:24:06 liang
++ * Increased symbol block size to 16.
++ *
++ * Revision 1.10 1999/02/23 22:03:26 liang
++ * Increased maximal static memory size allowed.
++ *
++ * Revision 1.9 1999/02/17 02:39:21 ilyas
++ * Changes for NDIS
++ *
++ * Revision 1.8 1999/02/11 22:44:30 ilyas
++ * More definitions for ATM
++ *
++ * Revision 1.7 1999/02/10 01:56:38 liang
++ * Added hooks for G994.1 and G992.2.
++ *
++ *
++ *****************************************************************************/
++
++#ifndef SoftDslHeader
++#define SoftDslHeader
++
++/* for builds in Linux/VxWorks CommEngine environment */
++#if (defined(__KERNEL__) && !defined(LINUX_DRIVER)) || defined(VXWORKS) || defined(_WIN32_WCE) || defined(TARG_OS_RTEMS) || defined(_CFE_)
++#include "AdslCoreDefs.h"
++#else
++#include "Bcm6345_To_Bcm6348.h" /* File for 45->48 changes */
++#endif
++
++#ifndef SoftModemPh
++#include "SoftModem.h"
++#endif
++
++#ifdef DSL_OS
++#include "DslOs.h"
++#endif
++
++/*
++**
++** Type definitions
++**
++*/
++
++#if defined(ATM) || defined(DSL_PACKET)
++#define DSL_LINKLAYER
++#endif
++
++#if defined(ATM_LAYER) || defined(DSL_PACKET_LAYER) || defined(G997_1_FRAMER)
++#define DSL_FRAME_FUNCTIONS
++#endif
++
++#define FLD_OFFSET(type,fld) ((int)(void *)&(((type *)0)->fld))
++
++#include "Que.h"
++#include "SoftAtmVc.h"
++
++typedef struct _dslFrameBuffer
++ {
++ struct _dslFrameBuffer *next; /* link to the next buffer in the frame */
++ void *pData; /* pointer to data */
++ ulong length; /* size (in bytes) of data */
++ } dslFrameBuffer;
++
++typedef struct _dslFrame
++ {
++ ulong Reserved[3];
++
++ ulong totalLength; /* total amount of data in the packet */
++ int bufCnt; /* buffer counter */
++ struct _dslFrameBuffer *head; /* first buffer in the chain */
++ struct _dslFrameBuffer *tail; /* last buffer in the chain */
++ } dslFrame;
++
++
++/* VC types and parameters */
++
++#define kDslVcAtm 1
++
++typedef struct
++ {
++ ulong vcType;
++ union
++ {
++ atmVcParams atmParams;
++ } params;
++ } dslVcParams;
++
++/*
++** Assuming that dslVcParams.params is the first field in VC
++** and RefData is the first field in dslVcParams.params
++*/
++
++#define DslVcGetRefData(pVc) (*(void **) (pVc))
++
++/* Frame OOB types */
++
++#define kDslFrameAtm 1
++
++typedef struct
++ {
++ ulong frameType;
++ union
++ {
++ atmOobPacketInfo atmInfo;
++ } param;
++ } dslOobFrameInfo;
++
++
++typedef struct
++ {
++ ulong (SM_DECL *__DslFrameBufferGetLength) (dslFrameBuffer *fb);
++ void * (SM_DECL *__DslFrameBufferGetAddress) (dslFrameBuffer *fb);
++ void (SM_DECL *__DslFrameBufferSetLength) (dslFrameBuffer *fb, ulong l);
++ void (SM_DECL *__DslFrameBufferSetAddress) (dslFrameBuffer *fb, void *p);
++
++ void (SM_DECL *__DslFrameInit) (dslFrame *f);
++ ulong (SM_DECL *__DslFrameGetLength) (dslFrame *pFrame);
++ ulong (SM_DECL *__DslFrameGetBufCnt) (dslFrame *pFrame);
++ dslFrameBuffer * (SM_DECL *__DslFrameGetFirstBuffer) (dslFrame *pFrame);
++ dslFrameBuffer * (SM_DECL *__DslFrameGetNextBuffer) (dslFrameBuffer *pFrBuffer);
++ void (SM_DECL *__DslFrameSetNextBuffer) (dslFrameBuffer *pFrBuf, dslFrameBuffer *pFrBufNext);
++ dslFrameBuffer * (SM_DECL *__DslFrameGetLastBuffer) (dslFrame *pFrame);
++ void * (SM_DECL *__DslFrameGetLinkFieldAddress) (dslFrame *f);
++ dslFrame * (SM_DECL *__DslFrameGetFrameAddressFromLink) (void *lnk);
++
++ Boolean (SM_DECL *__DslFrameGetOobInfo) (dslFrame *f, dslOobFrameInfo *pOobInfo);
++ Boolean (SM_DECL *__DslFrameSetOobInfo) (dslFrame *f, dslOobFrameInfo *pOobInfo);
++
++ void (SM_DECL *__DslFrameEnqueBufferAtBack) (dslFrame *f, dslFrameBuffer *b);
++ void (SM_DECL *__DslFrameEnqueFrameAtBack) (dslFrame *fMain, dslFrame *f);
++ void (SM_DECL *__DslFrameEnqueBufferAtFront) (dslFrame *f, dslFrameBuffer *b);
++ void (SM_DECL *__DslFrameEnqueFrameAtFront) (dslFrame *fMain, dslFrame *f);
++ dslFrameBuffer * (SM_DECL *__DslFrameDequeBuffer) (dslFrame *pFrame);
++
++ void * (SM_DECL *__DslFrameAllocMemForFrames) (ulong frameNum);
++ void (SM_DECL *__DslFrameFreeMemForFrames) (void *hMem);
++ dslFrame * (SM_DECL *__DslFrameAllocFrame) (void *handle);
++ void (SM_DECL *__DslFrameFreeFrame) (void *handle, dslFrame *pFrame);
++ void * (SM_DECL *__DslFrameAllocMemForBuffers) (void **ppMemPool, ulong bufNum, ulong memSize);
++ void (SM_DECL *__DslFrameFreeMemForBuffers) (void *hMem, ulong memSize, void *pMemPool);
++ dslFrameBuffer * (SM_DECL *__DslFrameAllocBuffer) (void *handle, void *pMem, ulong length);
++ void (SM_DECL *__DslFrameFreeBuffer) (void *handle, dslFrameBuffer *pBuf);
++
++ /* for LOG file support */
++
++ ulong (SM_DECL *__DslFrame2Id)(void *handle, dslFrame *pFrame);
++ void * (SM_DECL *__DslFrameId2Frame)(void *handle, ulong frameId);
++ } dslFrameFunctions;
++
++#define DslFrameDeclareFunctions( name_prefix ) \
++extern ulong SM_DECL name_prefix##BufferGetLength(dslFrameBuffer *fb); \
++extern void * SM_DECL name_prefix##BufferGetAddress(dslFrameBuffer *fb); \
++extern void SM_DECL name_prefix##BufferSetLength(dslFrameBuffer *fb, ulong l); \
++extern void SM_DECL name_prefix##BufferSetAddress(dslFrameBuffer *fb, void *p); \
++ \
++extern void SM_DECL name_prefix##Init(dslFrame *f); \
++extern ulong SM_DECL name_prefix##GetLength (dslFrame *pFrame); \
++extern ulong SM_DECL name_prefix##GetBufCnt(dslFrame *pFrame); \
++extern dslFrameBuffer * SM_DECL name_prefix##GetFirstBuffer(dslFrame *pFrame); \
++extern dslFrameBuffer * SM_DECL name_prefix##GetNextBuffer(dslFrameBuffer *pFrBuffer); \
++extern void SM_DECL name_prefix##SetNextBuffer(dslFrameBuffer *pFrBuf, dslFrameBuffer *pFrBufNext); \
++extern dslFrameBuffer * SM_DECL name_prefix##GetLastBuffer(dslFrame *pFrame); \
++extern void * SM_DECL name_prefix##GetLinkFieldAddress(dslFrame *f); \
++extern Boolean SM_DECL name_prefix##GetOobInfo(dslFrame *f, dslOobFrameInfo *pOobInfo); \
++extern Boolean SM_DECL name_prefix##SetOobInfo(dslFrame *f, dslOobFrameInfo *pOobInfo); \
++extern dslFrame* SM_DECL name_prefix##GetFrameAddressFromLink(void *lnk); \
++extern void SM_DECL name_prefix##EnqueBufferAtBack(dslFrame *f, dslFrameBuffer *b); \
++extern void SM_DECL name_prefix##EnqueFrameAtBack(dslFrame *fMain, dslFrame *f); \
++extern void SM_DECL name_prefix##EnqueBufferAtFront(dslFrame *f, dslFrameBuffer *b); \
++extern void SM_DECL name_prefix##EnqueFrameAtFront(dslFrame *fMain, dslFrame *f); \
++extern dslFrameBuffer * SM_DECL name_prefix##DequeBuffer(dslFrame *pFrame); \
++ \
++extern void * SM_DECL name_prefix##AllocMemForFrames(ulong frameNum); \
++extern void SM_DECL name_prefix##FreeMemForFrames(void *hMem); \
++extern dslFrame * SM_DECL name_prefix##AllocFrame(void *handle); \
++extern void SM_DECL name_prefix##FreeFrame(void *handle, dslFrame *pFrame); \
++extern void * SM_DECL name_prefix##AllocMemForBuffers(void **ppMemPool, ulong bufNum, ulong memSize); \
++extern void SM_DECL name_prefix##FreeMemForBuffers(void *hMem, ulong memSize, void *pMemPool); \
++extern dslFrameBuffer * SM_DECL name_prefix##AllocBuffer(void *handle, void *pMem, ulong length); \
++extern void SM_DECL name_prefix##FreeBuffer(void *handle, dslFrameBuffer *pBuf); \
++extern ulong SM_DECL name_prefix##2Id(void *handle, dslFrame *pFrame); \
++extern void * SM_DECL name_prefix##Id2Frame(void *handle, ulong frameId);
++
++
++#define DslFrameAssignFunctions( var, name_prefix ) do { \
++ (var).__DslFrameBufferGetLength = name_prefix##BufferGetLength; \
++ (var).__DslFrameBufferGetAddress= name_prefix##BufferGetAddress; \
++ (var).__DslFrameBufferSetLength = name_prefix##BufferSetLength; \
++ (var).__DslFrameBufferSetAddress= name_prefix##BufferSetAddress; \
++ \
++ (var).__DslFrameInit = name_prefix##Init; \
++ (var).__DslFrameGetLength = name_prefix##GetLength; \
++ (var).__DslFrameGetBufCnt = name_prefix##GetBufCnt; \
++ (var).__DslFrameGetFirstBuffer = name_prefix##GetFirstBuffer; \
++ (var).__DslFrameGetNextBuffer = name_prefix##GetNextBuffer; \
++ (var).__DslFrameSetNextBuffer = name_prefix##SetNextBuffer; \
++ (var).__DslFrameGetLastBuffer = name_prefix##GetLastBuffer; \
++ (var).__DslFrameGetLinkFieldAddress = name_prefix##GetLinkFieldAddress; \
++ (var).__DslFrameGetFrameAddressFromLink = name_prefix##GetFrameAddressFromLink; \
++ \
++ (var).__DslFrameGetOobInfo = name_prefix##GetOobInfo; \
++ (var).__DslFrameSetOobInfo = name_prefix##SetOobInfo; \
++ \
++ (var).__DslFrameEnqueBufferAtBack = name_prefix##EnqueBufferAtBack; \
++ (var).__DslFrameEnqueFrameAtBack = name_prefix##EnqueFrameAtBack; \
++ (var).__DslFrameEnqueBufferAtFront= name_prefix##EnqueBufferAtFront; \
++ (var).__DslFrameEnqueFrameAtFront = name_prefix##EnqueFrameAtFront; \
++ (var).__DslFrameDequeBuffer = name_prefix##DequeBuffer; \
++ \
++ (var).__DslFrameAllocMemForFrames = name_prefix##AllocMemForFrames; \
++ (var).__DslFrameFreeMemForFrames = name_prefix##FreeMemForFrames; \
++ (var).__DslFrameAllocFrame = name_prefix##AllocFrame; \
++ (var).__DslFrameFreeFrame = name_prefix##FreeFrame; \
++ (var).__DslFrameAllocMemForBuffers= name_prefix##AllocMemForBuffers; \
++ (var).__DslFrameFreeMemForBuffers = name_prefix##FreeMemForBuffers; \
++ (var).__DslFrameAllocBuffer = name_prefix##AllocBuffer; \
++ (var).__DslFrameFreeBuffer = name_prefix##FreeBuffer; \
++ \
++ (var).__DslFrame2Id = name_prefix##2Id; \
++ (var).__DslFrameId2Frame = name_prefix##Id2Frame; \
++} while (0)
++
++typedef struct
++ {
++ Boolean febe_I;
++ Boolean fecc_I;
++ Boolean los, rdi;
++ Boolean ncd_I;
++ Boolean hec_I;
++#ifdef G992P3
++ Boolean lpr;
++#endif
++
++#ifdef G992P1_NEWFRAME
++
++ Boolean febe_F;
++ Boolean fecc_F;
++ Boolean ncd_F;
++ Boolean hec_F;
++
++#endif
++ } G992MonitorParams;
++
++typedef struct
++ {
++ ushort K;
++ uchar S, R;
++ uchar D;
++#ifdef G992P3
++ uchar T, SEQ;
++#endif
++ directionType direction;
++
++#ifdef G992P1_NEWFRAME
++
++ ushort N;
++ ushort NF;
++ uchar RSF;
++
++ uchar AS0BF, AS1BF, AS2BF, AS3BF, AEXAF;
++ ushort AS0BI;
++ uchar AS1BI, AS2BI, AS3BI, AEXAI;
++
++ uchar LS0CF, LS1BF, LS2BF, LEXLF;
++ uchar LS0CI, LS1BI, LS2BI, LEXLI;
++
++ uchar mergedModeEnabled;
++
++#endif
++
++ } G992CodingParams;
++
++typedef struct
++ {
++ uchar Nlp;
++ uchar Nbc;
++ uchar MSGlp;
++ ushort MSGc;
++
++ ulong L;
++ ushort M;
++ ushort T;
++ ushort D;
++ ushort R;
++ ushort B;
++ } G992p3CodingParams;
++
++/* Power Management Message definitions (used in command and status) */
++
++typedef struct
++ {
++ long msgType;
++ union
++ {
++ long value;
++ struct
++ {
++ long msgLen;
++ void *msgData;
++ } msg;
++ } param;
++ } dslPwrMessage;
++
++/* Power Management commands and responses */
++
++#define kPwrSimpleRequest 1
++#define kPwrL2Request 2
++#define kPwrL2TrimRequest 3
++
++#define kPwrGrant 0x80
++#define kPwrReject 0x81
++#define kPwrL2Grant 0x82
++#define kPwrL2Reject 0x83
++#define kPwrL2TrimGrant 0x84
++#define kPwrL2TrimReject 0x85
++#define kPwrL2Grant2p 0x86
++
++#define kPwrBusy 0x01
++#define kPwrInvalid 0x02
++#define kPwrNotDesired 0x03
++#define kPwrInfeasibleParam 0x04
++
++/* Power Management reason codes */
++
++/* OLR definitions (used in command and status) */
++
++typedef struct
++ {
++ ushort msgType;
++ ushort nCarrs;
++ ushort L[4];
++ uchar B[4];
++ void *carrParamPtr;
++ } dslOLRMessage;
++
++typedef struct
++ {
++ uchar ind;
++ uchar gain;
++ uchar gb;
++ } dslOLRCarrParam;
++
++typedef struct
++ {
++ ushort ind;
++ uchar gain;
++ uchar gb;
++ } dslOLRCarrParam2p;
++
++/* OLR messages */
++
++#define kOLRRequestType1 1
++#define kOLRRequestType2 2
++#define kOLRRequestType3 3
++#define kOLRRequestType4 4
++#define kOLRRequestType5 5
++#define kOLRRequestType6 6
++
++#define kOLRDeferType1 0x81
++#define kOLRRejectType2 0x82
++#define kOLRRejectType3 0x83
++
++/* OLR reason codes */
++
++#define kOLRBusy 1
++#define kOLRInvalidParam 2
++#define kOLRNotEnabled 3
++#define kOLRNotSupported 4
++
++/* common EOC definitions */
++#define kG992EocStuffingByte 0x0C
++
++/* showtime monitor counters */
++#define kG992ShowtimeRSCodewordsRcved 0 /* number of Reed-Solomon codewords received */
++#define kG992ShowtimeRSCodewordsRcvedOK 1 /* number of Reed-Solomon codewords received with all symdromes zero */
++#define kG992ShowtimeRSCodewordsRcvedCorrectable 2 /* number of Reed-Solomon codewords received with correctable errors */
++#define kG992ShowtimeRSCodewordsRcvedUncorrectable 3 /* number of Reed-Solomon codewords received with un-correctable errors */
++#define kG992ShowtimeSuperFramesRcvd 4 /* number of super frames received */
++#define kG992ShowtimeSuperFramesRcvdWrong 5 /* number of super frames received with CRC error */
++#define kG992ShowtimeLastUncorrectableRSCount 6 /* last recorded value for kG992ShowtimeRSCodewordsRcvedUncorrectable */
++#define kG992ShowtimeLastWrongSuperFrameCount 7 /* last recorded value for kG992ShowtimeSuperFramesRcvdWrong */
++#define kG992ShowtimeNumOfShortResync 8 /* number of short interrupt recoveries by FEQ */
++
++#define kG992ShowtimeNumOfFEBE 9 /* number of other side superframe errors */
++#define kG992ShowtimeNumOfFECC 10 /* number of other side superframe FEC errors */
++#define kG992ShowtimeNumOfFHEC 11 /* number of far-end ATM header CRC errors */
++#define kG992ShowtimeNumOfFOCD 12 /* number of far-end OCD events */
++#define kG992ShowtimeNumOfFLCD 13 /* number of far-end LCD events */
++#define kG992ShowtimeNumOfHEC 14 /* number of ATM header CRC errors */
++#define kG992ShowtimeNumOfOCD 15 /* number of OCD events */
++#define kG992ShowtimeNumOfLCD 16 /* number of LCD events */
++
++#define kG992ShowtimeNumOfMonitorCounters (kG992ShowtimeNumOfLCD+1) /* always last number + 1 */
++#define kG992ShowtimeMonitorReportNumber 9
++
++#define kG992ShowtimeLCDNumShift 1
++#define kG992ShowtimeLCDFlag 1
++
++typedef int (SM_DECL *dslFrameHandlerType) (void *gDslVars, void *pVc, ulong mid, dslFrame *);
++
++typedef void* (SM_DECL *dslHeaderHandlerType) (void *gDslVars, ulong hdr, uchar hdrHec);
++typedef void* (SM_DECL *dslTxFrameBufferHandlerType) (void *gDslVars, int*, void*);
++typedef void* (SM_DECL *dslRxFrameBufferHandlerType) (void *gDslVars, int, void*);
++
++typedef void* (SM_DECL *dslVcAllocateHandlerType) (void *gDslVars, void *);
++typedef void (SM_DECL *dslVcFreeHandlerType) (void *gDslVars, void *);
++typedef Boolean (SM_DECL *dslVcActivateHandlerType) (void *gDslVars, void *);
++typedef void (SM_DECL *dslVcDeactivateHandlerType) (void *gDslVars, void *);
++typedef Boolean (SM_DECL *dslVcConfigureHandlerType) (void *gDslVars, void *pVc, ulong mid, void *);
++
++typedef ulong (SM_DECL *dslLinkVc2IdHandlerType) (void *gDslVars, void *);
++typedef void* (SM_DECL *dslLinkVcId2VcHandlerType) (void *gDslVars, ulong);
++typedef void* (SM_DECL *dslGetFramePoolHandlerType) (void *gDslVars);
++
++typedef void (SM_DECL *dslLinkCloseHandlerType) (void *gDslVars);
++typedef int (SM_DECL *dslTxDataHandlerType)(void *gDslVars, int, int, uchar*, G992MonitorParams*);
++typedef int (SM_DECL *dslRxDataHandlerType)(void *gDslVars, int, uchar*, G992MonitorParams*);
++
++typedef void (SM_DECL *dslLinkStatusHandler) (void *gDslVars, ulong statusCode, ...);
++
++typedef Boolean (SM_DECL *dslPhyInitType) (
++ void *gDslVars,
++ bitMap setupMap,
++ dslHeaderHandlerType rxCellHeaderHandlerPtr,
++ dslRxFrameBufferHandlerType rxFrameHandlerPtr,
++ dslTxFrameBufferHandlerType txFrameHandlerPtr,
++ atmStatusHandler statusHandlerPtr);
++
++struct _dslFramerBufDesc;
++
++typedef Boolean (SM_DECL *dslFramerDataGetPtrHandlerType) (void *gDslVars, struct _dslFramerBufDesc *pBufDesc);
++typedef void (SM_DECL *dslFramerDataDoneHandlerType) (void *gDslVars, struct _dslFramerBufDesc *pBufDesc);
++
++typedef void (SM_DECL *dslDriverCallbackType) (void *gDslVars);
++
++#ifdef DSL_PACKET
++
++typedef struct
++ {
++ dslFramerDataGetPtrHandlerType rxDataGetPtrHandler;
++ dslFramerDataDoneHandlerType rxDataDoneHandler;
++ dslFramerDataGetPtrHandlerType txDataGetPtrHandler;
++ dslFramerDataDoneHandlerType txDataDoneHandler;
++ } dslPacketPhyFunctions;
++
++typedef Boolean (SM_DECL *dslPacketPhyInitType) (
++ void *gDslVars,
++ bitMap setupMap,
++ dslPacketPhyFunctions dslPhyFunctions,
++ dslLinkStatusHandler statusHandlerPtr);
++
++
++#endif /* DSL_PACKET */
++
++
++typedef int dslDirectionType;
++typedef bitMap dslModulationType;
++typedef bitMap dslLinkLayerType;
++
++/*
++**
++** Log data codes
++**
++*/
++
++#define kDslEyeData eyeData
++
++#define kDslLogComplete (inputSignalData - 1)
++#define kDslLogInputData inputSignalData
++#define kDslLogInputData1 (inputSignalData + 1)
++#define kDslLogInputData2 (inputSignalData + 2)
++#define kDslLogInputData3 (inputSignalData + 3)
++
++/*
++**
++** Status codes
++**
++*/
++
++typedef long dslStatusCode;
++#define kFirstDslStatusCode 256
++#define kDslError (kFirstDslStatusCode + 0)
++#define kAtmStatus (kFirstDslStatusCode + 1)
++#define kDslTrainingStatus (kFirstDslStatusCode + 2)
++#define kDslConnectInfoStatus (kFirstDslStatusCode + 3)
++#define kDslEscapeToG994p1Status (kFirstDslStatusCode + 4)
++#define kDslFrameStatus (kFirstDslStatusCode + 5)
++#define kDslReceivedEocCommand (kFirstDslStatusCode + 6)
++#define kDslSendEocCommandDone (kFirstDslStatusCode + 7)
++#define kDslSendEocCommandFailed (kFirstDslStatusCode + 8)
++#define kDslWriteRemoteRegisterDone (kFirstDslStatusCode + 9)
++#define kDslReadRemoteRegisterDone (kFirstDslStatusCode + 10)
++#define kDslExternalError (kFirstDslStatusCode + 11)
++#define kDslDspControlStatus (kFirstDslStatusCode + 12)
++#define kDslATUHardwareAGCRequest (kFirstDslStatusCode + 13)
++#define kDslPacketStatus (kFirstDslStatusCode + 14)
++#define kDslG997Status (kFirstDslStatusCode + 15)
++#define kDslPrintfStatus (kFirstDslStatusCode + 16)
++#define kDslPrintfStatus1 (kFirstDslStatusCode + 17)
++#define kDslExceptionStatus (kFirstDslStatusCode + 18)
++#define kDslPingResponse (kFirstDslStatusCode + 19)
++#define kDslShowtimeSNRMarginInfo (kFirstDslStatusCode + 20)
++#define kDslGetOemParameter (kFirstDslStatusCode + 21)
++#define kDslOemDataAddrStatus (kFirstDslStatusCode + 22)
++#define kDslDataAvailStatus (kFirstDslStatusCode + 23)
++/* #define kDslAtuChangeTxFilterRequest (kFirstDslStatusCode + 24) */
++#define kDslTestPllPhaseResult (kFirstDslStatusCode + 25)
++#ifdef BCM6348_SRC
++#define kDslHardwareAGCSetPga1 (kFirstDslStatusCode + 26)
++#define kDslHardwareAGCDecPga1 (kFirstDslStatusCode + 27)
++#define kDslHardwareAGCIncPga1 (kFirstDslStatusCode + 28)
++#define kDslHardwareAGCSetPga2Delta (kFirstDslStatusCode + 29)
++#endif
++#define kDslOLRRequestStatus (kFirstDslStatusCode + 30)
++#define kDslOLRResponseStatus (kFirstDslStatusCode + 31)
++#define kDslOLRBitGainUpdateStatus (kFirstDslStatusCode + 32)
++#define kDslPwrMgrStatus (kFirstDslStatusCode + 33)
++#define kDslEscapeToT1p413Status (kFirstDslStatusCode + 34)
++#ifdef BCM6348_SRC
++#define kDslHardwareAGCSetPga2 (kFirstDslStatusCode + 35)
++#define kDslHardwareGetRcvAGC (kFirstDslStatusCode + 36)
++#endif
++#define kDslUpdateXmtReadPtr (kFirstDslStatusCode + 37)
++#define kDslHardwareSetRcvAGC (kFirstDslStatusCode + 38)
++#ifdef BCM6348_SRC
++#define kDslSetDigUsPwrCutback (kFirstDslStatusCode + 39)
++#endif
++
++#define kClientSideInitiation 0
++#define kClientSideRespond 1
++#define kCentralSideInitiation 2
++#define kCentralSideRespond 3
++
++/* OEM parameter ID definition */
++
++#define kDslOemG994VendorId 1
++#define kDslOemG994XmtNSInfo 2
++#define kDslOemG994RcvNSInfo 3
++#define kDslOemEocVendorId 4
++#define kDslOemEocVersion 5
++#define kDslOemEocSerNum 6
++#define kDslOemT1413VendorId 7
++#define kDslOemT1413EocVendorId 8
++
++typedef long dslErrorCode;
++
++typedef long atmStatusCode;
++typedef long dslFramerStatusCode;
++
++typedef long atmErrorCode;
++
++typedef long dslTrainingStatusCode;
++
++#define kDslStartedG994p1 0
++#define kDslStartedT1p413HS 1
++
++/* reserved for G.994.1: 1 ~ 8 */
++
++#define kDslG994p1MessageDet 100
++#define kDslG994p1ToneDet 101
++#define kDslG994p1RToneDet 102
++#define kDslG994p1FlagDet 103
++#define kDslG994p1GalfDet 104
++#define kDslG994p1ErrorFrameDet 105
++#define kDslG994p1BadFrameDet 106
++#define kDslG994p1SilenceDet 107
++#define kDslG994p1RcvTimeout 108
++#define kDslG994p1XmtFinished 109
++#define kDslG994p1ReturntoStartup 110
++#define kDslG994p1InitiateCleardown 111
++#define kDslG994p1StartupFinished 112
++#define kDslG994p1RcvNonStandardInfo 113
++#define kDslG994p1XmtNonStandardInfo 114
++
++#define kG994p1MaxNonstdMessageLength 64
++
++#define kDslFinishedT1p413 1100
++#define kDslT1p413DetectedCTone 1101
++#define kDslT1p413DetectedCAct 1102
++#define kDslT1p413DetectedCReveille 1103
++#define kDslT1p413DetectedRActReq 1104
++#define kDslT1p413DetectedRQuiet1 1105
++#define kDslT1p413DetectedRAct 1106
++#define kDslT1p413TimeoutCReveille 1107
++#define kDslT1p413ReturntoStartup 1108
++
++#define kDslG994p1Timeout 8
++#define kDslFinishedG994p1 9
++#define kDslStartedG992p2Training 10
++#define kDslG992p2DetectedPilotSymbol 11
++#define kDslG992p2DetectedReverbSymbol 12
++#define kDslG992p2TEQCalculationDone 13
++#define kDslG992p2TrainingFEQ 14
++#define kDslG992p2Phase3Started 15
++#define kDslG992p2ReceivedRates1 16
++#define kDslG992p2ReceivedMsg1 17
++#define kDslG992p2Phase4Started 18
++#define kDslG992p2ReceivedRatesRA 19
++#define kDslG992p2ReceivedMsgRA 20
++#define kDslG992p2ReceivedRates2 21
++#define kDslG992p2ReceivedMsg2 22
++#define kDslG992p2ReceivedBitGainTable 23
++#define kDslG992p2TxShowtimeActive 24
++#define kDslG992p2RxShowtimeActive 25
++#define kDslG992p2TxAocMessage 26
++#define kDslG992p2RxAocMessage 27
++#define kDslG992p2TxEocMessage 28
++#define kDslG992p2RxEocMessage 29
++#define kDslFinishedG992p2Training 30
++#define kDslRecoveredFromImpulseNoise 31
++#define kDslG992Timeout 32
++#define kDslT1p413Isu1SglByteSymDetected 33 /* detected T1.413 Issue 1 single byte per symbol mode */
++#define kDslG992RxPrefixOnInAFewSymbols 34
++#define kDslG992TxPrefixOnInAFewSymbols 35
++#define kDslAnnexCXmtCPilot1Starting 36
++#define kDslXmtToRcvPathDelay 37
++#define kDslFeaturesUnsupported 38
++#define kDslG992RcvMsgCrcError 39
++#define kDslAnnexCDetectedStartHyperframe 40
++
++#define kDslG992AnnexCTimeoutCPilot1Detection 41
++#define kDslG992AnnexCTimeoutCReverb1Detection 42
++#define kDslG992AnnexCTimeoutECTraining 43
++#define kDslG992AnnexCTimeoutHyperframeDetector 44
++#define kDslG992AnnexCTimeoutSendRSegue2 45
++#define kDslG992AnnexCTimeoutDetectCSegue1 46
++#define kDslG992AnnexCAlignmentErrDetected 47
++#define kDslG992AnnexCTimeoutSendRSegueRA 48
++#define kDslG992AnnexCTimeoutSendRSegue4 49
++#define kDslG992AnnexCTimeoutCSegue2Detection 50
++#define kDslG992AnnexCTimeoutCSegue3Detection 51
++/* Progress report for fast retrain */
++
++#define kG994p1EventToneDetected 54
++#define kDslG992p2RcvVerifiedBitAndGain 55
++#define kDslG992p2ProfileChannelResponseCalc 56
++#define kDslG992AnnexCTotalFEXTBits 57
++#define kDslG992AnnexCTotalNEXTBits 58
++#define kDslG992AnnexCTotalFEXTCarrs 59
++#define kDslG992AnnexCTotalNEXTCarrs 60
++
++#define kDslG992p3ReceivedMsgFmt 61
++#define kDslG992p3ReceivedMsgPcb 62
++
++#define kDslG992p3AnnexLMode 63
++
++/* performance monitoring report */
++
++#define kG992DataRcvDetectFastRSCorrection 70
++#define kG992DataRcvDetectInterleaveRSCorrection 71
++#define kG992DataRcvDetectFastCRCError 72
++#define kG992DataRcvDetectInterleaveCRCError 73
++#define kG992DataRcvDetectFastRSError 74
++#define kG992DataRcvDetectInterleaveRSError 75
++#define kG992DataRcvDetectLOS 76
++#define kG992DecoderDetectRDI 77
++#define kG992DataRcvDetectLOSRecovery 78
++#define kG992AtmDetectHEC 79
++#define kG992AtmDetectOCD 180
++#define kG992AtmDetectCD 181
++#define kG992DecoderDetectRemoteLOS 182
++#define kG992DecoderDetectRemoteLOSRecovery 183
++#define kG992DecoderDetectRemoteRDI 184
++#define kG992DecoderDetectRemoteRDIRecovery 185
++#define kG992RcvDetectSyncSymbolOffset 186
++#define kG992Upstream2xIfftDisabled 187
++#if defined(G992P5)
++#define kDslG992RunAnnexaP3ModeInAnnexaP5 188 /* run Annex C mode in Annex I compiled codes */
++#else
++#define kDslG992RunAnnexCModeInAnnexI 188 /* run Annex C mode in Annex I compiled codes */
++#endif
++
++/* OLR PHY status */
++
++#define kG992EventSynchSymbolDetected 189
++#define kG992EventReverseSynchSymbolDetected 190
++#define kG992EventL2CReverbSymbolDetected 191
++#define kG992EventL2CSegueSymbolDetected 192
++
++/* ANNEX_M */
++#define kG992EnableAnnexM 191
++
++#define kDslAtuChangeTxFilterRequest 192
++
++/* detailed error messages reports */
++
++#define kDslG992XmtRReverbRAOver4000 80
++#define kDslG992XmtRReverb5Over4000 81
++#define kDslG992RcvCSegue2Failed 82
++#define kDslG992RcvCSegueRAFailed 83
++#define kDslG992RcvCSegue3Failed 84
++#define kDslG992RcvShowtimeStartedTooLate 85
++#define kDslG992XmtRReverb3Over4000 86
++#define kDslG992RcvFailDetCSegue1InWindow 87
++#define kDslG992RcvCPilot1Failed 88
++#define kDslG992RcvCReverb1Failed 89
++#define kG992ControlAllRateOptionsFailedErr 90
++#define kG992ControlInvalidRateOptionErr 91
++#define kDslG992XmtInvalidXmtDErr 92
++#define kDslG992BitAndGainCalcFailed 93
++#define kDslG992BitAndGainVerifyFailed 94
++
++#define kDslT1p413RetrainToUseCorrectRAck 95
++#define kDslUseAlternateTxFilter 96
++#define kDslT1p413RetrainToUseCorrectIFFT 97
++
++typedef long dslConnectInfoStatusCode;
++#define kG992p2XmtToneOrderingInfo 0
++#define kG992p2RcvToneOrderingInfo 1
++#define kG992p2XmtCodingParamsInfo 2
++#define kG992p2RcvCodingParamsInfo 3
++#define kG992p2TrainingRcvCarrEdgeInfo 4
++#define kG992ShowtimeMonitoringStatus 5
++#define kG992MessageExchangeRcvInfo 6
++#define kG992MessageExchangeXmtInfo 7
++#define kG994MessageExchangeRcvInfo 8
++#define kG994MessageExchangeXmtInfo 9
++
++#define kDslATURClockErrorInfo 10
++#define kDslATURcvPowerInfo 11
++#define kDslATUAvgLoopAttenuationInfo 12
++#define kDslHWTimeTrackingResetClockError 13
++#define kDslHWTimeTrackingClockTweak 14
++#define kDslATUHardwareAGCObtained 15
++#define kDslTEQCoefInfo 16
++#define kDslRcvCarrierSNRInfo 17
++#define kDslMaxReceivableBitRateInfo 18
++#define kDslHWSetDigitalEcUpdateMode 19
++#define kDslHWEnableDigitalECUpdate 20
++#define kDslHWDisableDigitalECUpdate 21
++#define kDslHWEnableDigitalEC 22
++#define kDslHWSetDigitalEcGainShift 23
++#define kDslHWSetDigitalEcUpdateShift 24
++#define kDslRcvPsdInfo 25
++#define kDslHWdcOffsetInfo 26
++#define kG994SelectedG994p1CarrierIndex 27
++#define kDslSelectedTimingTone 28
++
++#define kDslHWEnableAnalogECUpdate kDslHWSetDigitalEcUpdateMode
++#define kDslHWEnableAnalogEC kDslHWDisableDigitalECUpdate
++
++#define kG992AocMessageExchangeRcvInfo 29
++#define kG992AocMessageExchangeXmtInfo 30
++#define kG992AocBitswapTxStarted 31
++#define kG992AocBitswapRxStarted 32
++#define kG992AocBitswapTxCompleted 33
++#define kG992AocBitswapRxCompleted 34
++#define kDslChannelResponseLog 35
++#define kDslChannelResponseLinear 36
++#define kDslChannelQuietLineNoise 37
++
++#define kDslATUCXmtPowerCutbackInfo 40
++#define kDslATURXmtPowerCutbackInfo 41
++#define kDslATUCXmtPowerInfo 42
++#define kDslATURXmtPowerInfo 43
++
++#define kDslFramingModeInfo 50
++#define kDslG992VendorID 51
++
++#ifdef BCM6348_SRC
++#define kDslHWSetRcvFir2OutputScale 52
++#endif
++
++#define kDslSignalAttenuation 53
++#define kDslAttainableNetDataRate 54
++#define kDslHLinScale 55
++
++#define kG992p3XmtCodingParamsInfo 60
++#define kG992p3RcvCodingParamsInfo 61
++#define kG992p3PwrStateInfo 62
++#define kG992PilotToneInfo 63
++
++#define kDslSetPilotEyeDisplay 64
++
++#define kDslAturHwAgcResolutionMask (0xFFFFFFF8)
++#define kDslAturHwAgcMinGain ((-12)<<4)
++#ifndef BCM6348_SRC
++#define kDslAturHwAgcMaxGain (30<<4)
++#else
++#define kDslAturHwAgcMaxGain (36<<4)
++#endif
++
++#define kDslFrameStatusSend 1
++#define kDslFrameStatusSendComplete 2
++#define kDslFrameStatusRcv 3
++#define kDslFrameStatusReturn 4
++
++typedef struct _dslFramerStatus
++ {
++ dslFramerStatusCode code;
++ union
++ {
++ long value;
++ dslErrorCode error;
++ struct
++ {
++ long length;
++ uchar *framePtr;
++ } frame;
++ struct
++ {
++ long nRxFrameTotal;
++ long nRxFrameError;
++ long nTxFrameTotal;
++ } statistic;
++ } param;
++ } dslFramerStatus;
++
++typedef struct
++ {
++ dslStatusCode code;
++ union
++ {
++ long value;
++ dslErrorCode error;
++ struct
++ {
++ atmStatusCode code;
++ union
++ {
++ long value;
++ dslErrorCode error;
++ struct
++ {
++ long vci;
++ long mid;
++ long aalType;
++ long length;
++ uchar *framePtr;
++ } frame;
++ struct
++ {
++ long nFrames;
++ long nFrameErrors;
++ } statistic;
++ struct
++ {
++ long vcId;
++ long vci;
++ long aalType;
++ ulong fwdPeakCellTime;
++ ulong backPeakCellTime;
++ } vcInfo;
++ struct
++ {
++ long cellHdr;
++ long oamCmd;
++ } oamInfo;
++ struct
++ {
++ void *pVc;
++ char *pHdr;
++ void *cellHdr;
++ void *cellData;
++ } cellInfo;
++ struct
++ {
++ long totalBits;
++ long errBits;
++ } bertInfo;
++ } param;
++ } atmStatus;
++#ifdef DSL_PACKET
++ dslFramerStatus dslPacketStatus;
++#endif
++#ifdef G997_1_FRAMER
++ dslFramerStatus g997Status;
++#endif
++ struct
++ {
++ dslTrainingStatusCode code;
++ long value;
++ } dslTrainingInfo;
++ struct
++ {
++ dslConnectInfoStatusCode code;
++ long value;
++ void *buffPtr;
++ } dslConnectInfo;
++ struct
++ {
++ long maxMarginCarrier;
++ long maxSNRMargin;
++ long minMarginCarrier;
++ long minSNRMargin;
++ long avgSNRMargin;
++ long nCarriers;
++ void *buffPtr;
++ } dslShowtimeSNRMarginInfo;
++ struct
++ {
++ long code;
++ long vcId;
++ long timeStamp;
++ } dslFrameInfo;
++#ifdef G997_1
++ struct
++ {
++ long msgId;
++ long msgType;
++ char *dataPtr;
++ } dslClearEocMsg;
++#endif
++ struct
++ {
++ char *fmt;
++ long argNum;
++ void *argPtr;
++ } dslPrintfMsg;
++ struct
++ {
++ ulong nBits;
++ ulong nBlocks;
++ ulong nBitErrors;
++ ulong nBlockErrors;
++
++ ulong nAudioBits;
++ ulong nAudioBlocks;
++ ulong nAudioSyncErrors;
++ ulong nAudioBlockErrors;
++ } testResults;
++ struct
++ {
++ ulong code;
++ uchar *valuePtr;
++ ulong length;
++ } dslDataRegister;
++ struct
++ {
++ ulong code;
++ char *desc;
++ } dslExternalError;
++ struct
++ {
++ ulong numberOfCalls;
++ ulong txSignalChecksum;
++ ulong rxSignalChecksum;
++ ulong eyeDataChecksum;
++ } checksums;
++ struct
++ {
++ int sp;
++ int argc;
++ int *argv;
++ int *stackPtr;
++ int stackLen;
++ } dslException;
++ struct
++ {
++ ulong paramId;
++ void *dataPtr;
++ ulong dataLen;
++ } dslOemParameter;
++ struct
++ {
++ void *dataPtr;
++ ulong dataLen;
++ } dslDataAvail;
++ dslOLRMessage dslOLRRequest;
++ dslPwrMessage dslPwrMsg;
++ } param;
++ } dslStatusStruct;
++
++typedef void (SM_DECL *dslStatusHandlerType) (void *gDslVars, dslStatusStruct*);
++
++
++/*
++**
++** Command codes
++**
++*/
++
++typedef long dslCommandCode;
++#define kFirstDslCommandCode 256
++#define kDslIdleCmd (kFirstDslCommandCode + 0)
++#define kDslIdleRcvCmd (kFirstDslCommandCode + 1)
++#define kDslIdleXmtCmd (kFirstDslCommandCode + 2)
++#define kDslStartPhysicalLayerCmd (kFirstDslCommandCode + 3)
++#define kDslStartRetrainCmd (kFirstDslCommandCode + 4)
++#define kDslSetFrameFunctions (kFirstDslCommandCode + 5)
++#define kDslSendEocCommand (kFirstDslCommandCode + 6)
++#define kDslWriteRemoteRegister (kFirstDslCommandCode + 7)
++#define kDslReadRemoteRegister (kFirstDslCommandCode + 8)
++#define kDslWriteLocalRegister (kFirstDslCommandCode + 9)
++#define kDslReadLocalRegister (kFirstDslCommandCode + 10)
++#define kDslStoreHardwareAGCCmd (kFirstDslCommandCode + 11)
++#define kDslSetCommandHandlerCmd (kFirstDslCommandCode + 12)
++#define kSetLinkLayerStatusHandlerCmd (kFirstDslCommandCode + 13)
++#define kDslSetG997Cmd (kFirstDslCommandCode + 14)
++#define kDslLoopbackCmd (kFirstDslCommandCode + 15)
++#define kDslDiagSetupCmd (kFirstDslCommandCode + 16)
++#define kDslSetDriverCallbackCmd (kFirstDslCommandCode + 17)
++#define kDslDiagStopLogCmd (kFirstDslCommandCode + 18)
++#define kDslDiagStartBERT (kFirstDslCommandCode + 19)
++#define kDslDiagStopBERT (kFirstDslCommandCode + 20)
++#define kDslPingCmd (kFirstDslCommandCode + 21)
++#define kDslDyingGaspCmd (kFirstDslCommandCode + 22)
++#define kDslTestCmd (kFirstDslCommandCode + 23)
++#define kDslFilterSNRMarginCmd (kFirstDslCommandCode + 24)
++#define kDslAtmVcMapTableChanged (kFirstDslCommandCode + 25)
++#define kDslGetOemDataAddrCmd (kFirstDslCommandCode + 26)
++#define kDslAtmReportHEC (kFirstDslCommandCode + 27)
++#define kDslAtmReportCD (kFirstDslCommandCode + 28)
++#define kDslSetXmtGainCmd (kFirstDslCommandCode + 29)
++#define kDslSetStatusBufferCmd (kFirstDslCommandCode + 30)
++#define kDslAfeTestCmd (kFirstDslCommandCode + 31)
++#define kDslI432ResetCmd (kFirstDslCommandCode + 32)
++#define kDslSetRcvGainCmd (kFirstDslCommandCode + 33)
++#define kDslBypassRcvHpfCmd (kFirstDslCommandCode + 34)
++#define kDslWriteAfeRegCmd (kFirstDslCommandCode + 35)
++#define kDslReadAfeRegCmd (kFirstDslCommandCode + 36)
++#define kDslOLRRequestCmd (kFirstDslCommandCode + 37)
++#define kDslOLRResponseCmd (kFirstDslCommandCode + 38)
++#define kDslI432SetScrambleCmd (kFirstDslCommandCode + 39)
++#define kDslPwrMgrCmd (kFirstDslCommandCode + 40)
++#define kDslAtmGfcMappingCmd (kFirstDslCommandCode + 41)
++
++#ifdef BCM6348_SRC
++#define kDslEnablePwmSyncClk (kFirstDslCommandCode + 42)
++#define kDslSetPwmSyncClkFreq (kFirstDslCommandCode + 43)
++#endif
++
++#define kG994p1Duplex 1
++#define kG994p1HalfDuplex 2
++
++/* Eoc Messages from ATU-C to ATU-R */
++#define kDslEocHoldStateCmd 1
++#define kDslEocReturnToNormalCmd 2
++#define kDslEocPerformSelfTestCmd 3
++#define kDslEocRequestCorruptCRCCmd 4
++#define kDslEocRequestEndCorruptCRCCmd 5
++#define kDslEocNotifyCorruptCRCCmd 6
++#define kDslEocNotifyEndCorruptCRCCmd 7
++#define kDslEocRequestTestParametersUpdateCmd 8
++#define kDslEocGrantPowerDownCmd 9
++#define kDslEocRejectPowerDownCmd 10
++
++/* Eoc Messages from ATU-R to ATU-C */
++#define kDslEocRequestPowerDownCmd 11
++#define kDslEocDyingGaspCmd 12
++
++/* Clear Eoc Messages */
++#define kDslClearEocFirstCmd 100
++#define kDslClearEocSendFrame 100
++#define kDslClearEocSendComplete 101
++#define kDslClearEocRcvedFrame 102
++#define kDslClearEocSendComplete2 103
++
++#define kDslClearEocMsgLengthMask 0xFFFF
++#define kDslClearEocMsgNumMask 0xFF0000
++#define kDslClearEocMsgDataVolatileMask 0x1000000
++#define kDslClearEocMsgDataVolatile kDslClearEocMsgDataVolatileMask
++#define kDslClearEocMsgExtraSendComplete 0x2000000
++
++/* ADSL Link Power States */
++#define kDslPowerFullOn 0
++#define kDslPowerLow 1
++#define kDslPowerIdle 3
++
++/* ATU-R Data Registers */
++#define kDslVendorIDRegister 1
++#define kDslRevisionNumberRegister 2
++#define kDslSerialNumberRegister 3
++#define kDslSelfTestResultsRegister 4
++#define kDslLineAttenuationRegister 5
++#define kDslSnrMarginRegister 6
++#define kDslAturConfigurationRegister 7
++#define kDslLinkStateRegister 8
++
++#define kDslVendorIDRegisterLength 8
++#define kDslRevisionNumberRegisterLength 32
++#define kDslSerialNumberRegisterLength 32
++#define kDslSelfTestResultsRegisterLength 1
++#define kDslLineAttenuationRegisterLength 1
++#define kDslSnrMarginRegisterLength 1
++#define kDslAturConfigurationRegisterLength 30
++#define kDslLinkStateRegisterLength 1
++
++/* Dsl Diags setup flags */
++#define kDslDiagEnableEyeData 1
++#define kDslDiagEnableLogData 2
++
++/* Dsl test commands */
++typedef long dslTestCmdType;
++#define kDslTestBackToNormal 0
++#define kDslTestReverb 1
++#define kDslTestMedley 2
++#define kDslTestToneSelection 3
++#define kDslTestNoAutoRetrain 4
++#define kDslTestMarginTweak 5
++#define kDslTestEstimatePllPhase 6
++#define kDslTestReportPllPhaseStatus 7
++#define kDslTestAfeLoopback 8
++#define kDslTestL3 9
++#define kDslTestAdsl2DiagMode 10
++#define kDslTestRetL0 11
++
++/* Xmt gain default setting */
++#define kDslXmtGainAuto 0x80000000
++
++/* Unit (AFE) test commands */
++#define kDslAfeTestLoadImage 0
++#define kDslAfeTestPatternSend 1
++#define kDslAfeTestLoadImageOnly 2
++#define kDslAfeTestPhyRun 3
++#define kDslAfeTestLoadBuffer 4
++
++typedef struct
++ {
++#if defined(G992P1_ANNEX_I) || defined(G992P5)
++ ushort downstreamMinCarr, downstreamMaxCarr;
++#else
++ uchar downstreamMinCarr, downstreamMaxCarr;
++#endif
++ uchar upstreamMinCarr, upstreamMaxCarr;
++ }carrierInfo;
++
++#if defined(G992P3) && !defined(BCM6348_SRC)
++#define FAST_TEXT_TYPE
++#else
++#define FAST_TEXT_TYPE FAST_TEXT
++#endif
++
++#if defined(BCM6348_SRC)
++#define BCM6348_TEMP_MOVE_TO_LMEM
++#else
++#define BCM6348_TEMP_MOVE_TO_LMEM
++#endif
++
++#ifdef G992P3
++#define PRINT_DEBUG_INFO
++#else
++#define PRINT_DEBUG_INFO
++#endif
++
++#ifdef G992P3
++
++#define kG992p3MaxSpectBoundsUpSize 16
++#define kG992p3MaxSpectBoundsDownSize 16
++
++/* G.994 definitions */
++
++/*** Standard Info SPar2: G.992.3 Annex A Octet 1 ***/
++
++#define kG994p1G992p3AnnexASpectrumBoundsUpstream 0x01
++#define kG994p1G992p3AnnexASpectrumShapingUpstream 0x02
++#define kG994p1G992p3AnnexASpectrumBoundsDownstream 0x04
++#define kG994p1G992p3AnnexASpectrumShapingDownstream 0x08
++#define kG994p1G992p3AnnexATxImageAboveNyquistFreq 0x10
++#define kG994p1G992p3AnnexLReachExtended 0x20
++#define kG994p1G992p3AnnexMSubModePSDMasks 0x20
++
++#define kG994p1G992p3AnnexLUpNarrowband 0x02
++#define kG994p1G992p3AnnexLUpWideband 0x01
++#define kG994p1G992p3AnnexLDownNonoverlap 0x01
++
++/*** Standard Info SPar2: G.992.3 Annex A Octet 2 ***/
++
++#define kG994p1G992p3AnnexADownOverheadDataRate 0x01
++#define kG994p1G992p3AnnexAUpOverheadDataRate 0x02
++#define kG994p1G992p3AnnexAMaxNumberDownTPSTC 0x04
++#define kG994p1G992p3AnnexAMaxNumberUpTPSTC 0x08
++
++/*** Standard Info SPar2: G.992.3 Annex A Octet 3,5,7,9 ***/
++
++#define kG994p1G992p3AnnexADownSTM_TPS_TC 0x01
++#define kG994p1G992p3AnnexAUpSTM_TPS_TC 0x02
++#define kG994p1G992p3AnnexADownATM_TPS_TC 0x04
++#define kG994p1G992p3AnnexAUpATM_TPS_TC 0x08
++#define kG994p1G992p3AnnexADownPTM_TPS_TC 0x10
++#define kG994p1G992p3AnnexAUpPTM_TPS_TC 0x20
++
++/*** Standard Info SPar2: G.992.3 Annex A Octet 4,6,8,10 ***/
++
++#define kG994p1G992p3AnnexADownPMS_TC_Latency 0x01
++#define kG994p1G992p3AnnexAUpPMS_TC_Latency 0x02
++
++/***
++ * TSSI
++ *
++ * TSSI information is specified in 2 parts: subcarrier index,
++ * tssi value, and an indication of whether or no the tone specified
++ * is part of the supported set.
++ *
++ * The subcarrier index information is currently stored in the
++ * dsSubcarrierIndex array defined below. The tssi value are stored
++ * in the dsLog_tss array.
++ *
++ * The subcarrier index information only occupies the lower 12 bits
++ * of the available 16 bits (short type). Therefore, we will pack the
++ * supported set information in bit 15.
++ */
++#define kG992DsSubCarrierIndexMask (0x0fff) /* AND mask to ectract ds subcarrier index */
++#define kG992DsSubCarrierSuppSetMask (0x8000) /* AND mask to extract supported set indication */
++
++#define G992GetDsSubCarrierIndex(arg) ((arg) & kG992DsSubCarrierIndexMask)
++#define G992GetDsSubCarrierSuppSetIndication(arg) (((arg) & kG992DsSubCarrierSuppSetMask) >> 15)
++
++/* Caution: Do not change anything in this structure definition, including associated constant */
++/* This structure definition is used only by the driver and any change impose incompatibility issue in driver */
++/* The structure following this structure (g992p3PhyDataPumpCapabilities) can be changed in PHY application */
++
++typedef struct
++ {
++ Boolean rcvNTREnabled, shortInitEnabled, diagnosticsModeEnabled;
++
++ char featureSpectrum, featureOverhead;
++ char featureTPS_TC[4], featurePMS_TC[4];
++
++ short rcvNOMPSDus, rcvMAXNOMPSDus, rcvMAXNOMATPus;
++ short usSubcarrierIndex[kG992p3MaxSpectBoundsUpSize],
++ usLog_tss[kG992p3MaxSpectBoundsUpSize];
++ short numUsSubcarrier;
++ short rcvNOMPSDds, rcvMAXNOMPSDds, rcvMAXNOMATPds;
++ short dsSubcarrierIndex[kG992p3MaxSpectBoundsDownSize],
++ dsLog_tss[kG992p3MaxSpectBoundsDownSize];
++ short numDsSubcarrier;
++ uchar sizeIDFT, fillIFFT;
++ uchar readsl2Upstream, readsl2Downstream;
++ uchar minDownOverheadDataRate, minUpOverheadDataRate;
++ uchar maxDownSTM_TPSTC, maxDownATM_TPSTC, maxDownPTM_TPSTC;
++ uchar maxUpSTM_TPSTC, maxUpATM_TPSTC, maxUpPTM_TPSTC;
++
++ short minDownSTM_TPS_TC[4], maxDownSTM_TPS_TC[4],
++ minRevDownSTM_TPS_TC[4], maxDelayDownSTM_TPS_TC[4];
++ uchar maxErrorDownSTM_TPS_TC[4], minINPDownSTM_TPS_TC[4];
++ short minUpSTM_TPS_TC[4], maxUpSTM_TPS_TC[4],
++ minRevUpSTM_TPS_TC[4], maxDelayUpSTM_TPS_TC[4];
++ uchar maxErrorUpSTM_TPS_TC[4], minINPUpSTM_TPS_TC[4];
++
++ short maxDownPMS_TC_Latency[4], maxUpPMS_TC_Latency[4];
++ short maxDownR_PMS_TC_Latency[4], maxDownD_PMS_TC_Latency[4];
++ short maxUpR_PMS_TC_Latency[4], maxUpD_PMS_TC_Latency[4];
++
++ short minDownATM_TPS_TC[4], maxDownATM_TPS_TC[4],
++ minRevDownATM_TPS_TC[4], maxDelayDownATM_TPS_TC[4];
++ uchar maxErrorDownATM_TPS_TC[4], minINPDownATM_TPS_TC[4];
++ short minUpATM_TPS_TC[4], maxUpATM_TPS_TC[4],
++ minRevUpATM_TPS_TC[4], maxDelayUpATM_TPS_TC[4];
++ uchar maxErrorUpATM_TPS_TC[4], minINPUpATM_TPS_TC[4];
++
++ short minDownPTM_TPS_TC[4], maxDownPTM_TPS_TC[4],
++ minRevDownPTM_TPS_TC[4], maxDelayDownPTM_TPS_TC[4];
++ uchar maxErrorDownPTM_TPS_TC[4], minINPDownPTM_TPS_TC[4];
++ short minUpPTM_TPS_TC[4], maxUpPTM_TPS_TC[4],
++ minRevUpPTM_TPS_TC[4], maxDelayUpPTM_TPS_TC[4];
++ uchar maxErrorUpPTM_TPS_TC[4], minINPUpPTM_TPS_TC[4];
++
++ ushort subModePSDMasks;
++ } g992p3DataPumpCapabilities;
++
++#define kG992p3p5MaxSpectBoundsUpSize 16
++#define kG992p3p5MaxSpectBoundsDownSize 32
++
++typedef struct
++ {
++ Boolean rcvNTREnabled, shortInitEnabled, diagnosticsModeEnabled;
++
++ char featureSpectrum, featureOverhead;
++ char featureTPS_TC[4], featurePMS_TC[4];
++
++ short rcvNOMPSDus, rcvMAXNOMPSDus, rcvMAXNOMATPus;
++ short usSubcarrierIndex[kG992p3p5MaxSpectBoundsUpSize],
++ usLog_tss[kG992p3p5MaxSpectBoundsUpSize];
++ short numUsSubcarrier;
++ short rcvNOMPSDds, rcvMAXNOMPSDds, rcvMAXNOMATPds;
++ short dsSubcarrierIndex[kG992p3p5MaxSpectBoundsDownSize],
++ dsLog_tss[kG992p3p5MaxSpectBoundsDownSize];
++ short numDsSubcarrier;
++ uchar sizeIDFT, fillIFFT;
++ uchar readsl2Upstream, readsl2Downstream;
++ uchar minDownOverheadDataRate, minUpOverheadDataRate;
++ uchar maxDownSTM_TPSTC, maxDownATM_TPSTC, maxDownPTM_TPSTC;
++ uchar maxUpSTM_TPSTC, maxUpATM_TPSTC, maxUpPTM_TPSTC;
++
++ short minDownSTM_TPS_TC[4], maxDownSTM_TPS_TC[4],
++ minRevDownSTM_TPS_TC[4], maxDelayDownSTM_TPS_TC[4];
++ uchar maxErrorDownSTM_TPS_TC[4], minINPDownSTM_TPS_TC[4];
++ short minUpSTM_TPS_TC[4], maxUpSTM_TPS_TC[4],
++ minRevUpSTM_TPS_TC[4], maxDelayUpSTM_TPS_TC[4];
++ uchar maxErrorUpSTM_TPS_TC[4], minINPUpSTM_TPS_TC[4];
++
++ short maxDownPMS_TC_Latency[4], maxUpPMS_TC_Latency[4];
++ short maxDownR_PMS_TC_Latency[4], maxDownD_PMS_TC_Latency[4];
++ short maxUpR_PMS_TC_Latency[4], maxUpD_PMS_TC_Latency[4];
++
++ short minDownATM_TPS_TC[4], maxDownATM_TPS_TC[4],
++ minRevDownATM_TPS_TC[4], maxDelayDownATM_TPS_TC[4];
++ uchar maxErrorDownATM_TPS_TC[4], minINPDownATM_TPS_TC[4];
++ short minUpATM_TPS_TC[4], maxUpATM_TPS_TC[4],
++ minRevUpATM_TPS_TC[4], maxDelayUpATM_TPS_TC[4];
++ uchar maxErrorUpATM_TPS_TC[4], minINPUpATM_TPS_TC[4];
++
++ short minDownPTM_TPS_TC[4], maxDownPTM_TPS_TC[4],
++ minRevDownPTM_TPS_TC[4], maxDelayDownPTM_TPS_TC[4];
++ uchar maxErrorDownPTM_TPS_TC[4], minINPDownPTM_TPS_TC[4];
++ short minUpPTM_TPS_TC[4], maxUpPTM_TPS_TC[4],
++ minRevUpPTM_TPS_TC[4], maxDelayUpPTM_TPS_TC[4];
++ uchar maxErrorUpPTM_TPS_TC[4], minINPUpPTM_TPS_TC[4];
++
++ ushort subModePSDMasks;
++ } g992p3PhyDataPumpCapabilities;
++#endif
++
++typedef struct
++ {
++ dslModulationType modulations;
++ bitMap auxFeatures;
++ bitMap features;
++ bitMap demodCapabilities;
++ bitMap demodCapabilities2;
++ ushort noiseMargin; /* Q4 dB */
++#ifdef G992_ATUC
++ short xmtRSf, xmtRS, xmtS, xmtD;
++ short rcvRSf, rcvRS, rcvS, rcvD;
++#endif
++#ifdef G992P1_ANNEX_A
++ bitMap subChannelInfo;
++ carrierInfo carrierInfoG992p1;
++#endif
++#ifdef G992P1_ANNEX_B
++ bitMap subChannelInfoAnnexB;
++ carrierInfo carrierInfoG992p1AnnexB;
++#endif
++#ifdef G992_ANNEXC
++ bitMap subChannelInfoAnnexC;
++ carrierInfo carrierInfoG992p1AnnexC;
++#endif
++#if defined(G992P1_ANNEX_I)
++ bitMap subChannelInfoAnnexI;
++ carrierInfo carrierInfoG992p1AnnexI;
++#endif
++#ifdef G992P5
++ bitMap subChannelInfop5;
++ carrierInfo carrierInfoG992p5;
++#endif
++#if defined(G992P2) || (defined(G992P1_ANNEX_A) && defined(G992P1_ANNEX_A_USED_FOR_G992P2))
++ carrierInfo carrierInfoG992p2;
++#endif
++ ushort maxDataRate;
++ uchar minDataRate;
++#ifdef G992P3
++ g992p3DataPumpCapabilities *carrierInfoG992p3AnnexA;
++#endif
++#ifdef G992P5
++ g992p3DataPumpCapabilities *carrierInfoG992p5AnnexA;
++#endif
++ } dslDataPumpCapabilities;
++
++struct __dslCommandStruct;
++typedef Boolean (*dslCommandHandlerType) (void *gDslVars, struct __dslCommandStruct*);
++typedef struct __dslCommandStruct
++ {
++ dslCommandCode command;
++ union
++ {
++ long value;
++ Boolean flag;
++ struct
++ {
++ dslTestCmdType type;
++ union
++ {
++ struct
++ {
++ ulong xmtStartTone, xmtNumOfTones;
++ ulong rcvStartTone, rcvNumOfTones;
++ uchar *xmtMap, *rcvMap;
++ } toneSelectSpec;
++ struct
++ {
++ long extraPowerRequestQ4dB;
++ long numOfCarriers;
++ char *marginTweakTableQ4dB;
++ } marginTweakSpec;
++ } param;
++ } dslTestSpec;
++ struct
++ {
++ dslDirectionType direction;
++ dslDataPumpCapabilities capabilities;
++ } dslModeSpec;
++ struct
++ {
++ bitMap setup;
++ ulong eyeConstIndex1;
++ ulong eyeConstIndex2;
++ ulong logTime;
++ } dslDiagSpec;
++ struct
++ {
++ void *pBuf;
++ ulong bufSize;
++ } dslStatusBufSpec;
++ struct
++ {
++ ulong type;
++ void *afeParamPtr;
++ ulong afeParamSize;
++ void *imagePtr;
++ ulong imageSize;
++ } dslAfeTestSpec;
++ struct
++ {
++ dslLinkLayerType type;
++ bitMap setup;
++ union
++ {
++ struct
++ {
++ dataRateMap rxDataRate;
++ dataRateMap txDataRate;
++ long rtDelayQ4ms;
++ ulong rxBufNum;
++ ulong rxCellsInBuf;
++ ulong rxPacketNum;
++ dslFrameHandlerType rxIndicateHandlerPtr;
++ dslFrameHandlerType txCompleteHandlerPtr;
++ dslPhyInitType atmPhyInitPtr;
++ } atmLinkSpec;
++ struct
++ {
++ dslHeaderHandlerType rxHeaderHandlerPtr;
++ dslRxFrameBufferHandlerType rxDataHandlerPtr;
++ dslTxFrameBufferHandlerType txHandlerPtr;
++ } atmPhyLinkSpec;
++#ifdef DSL_PACKET
++ struct
++ {
++ ulong rxBufNum;
++ ulong rxBufSize;
++ ulong rxPacketNum;
++ dslFrameHandlerType rxIndicateHandlerPtr;
++ dslFrameHandlerType txCompleteHandlerPtr;
++ dslPacketPhyInitType dslPhyInitPtr;
++ } dslPacketLinkSpec;
++ dslPacketPhyFunctions dslPacketPhyLinkSpec;
++#endif
++ struct
++ {
++ txDataHandlerType txDataHandlerPtr;
++ rxDataHandlerType rxDataHandlerPtr;
++ } nullLinkSpec;
++ } param;
++ } dslLinkLayerSpec;
++#ifdef G997_1
++#ifdef G997_1_FRAMER
++ struct
++ {
++ bitMap setup;
++ ulong rxBufNum;
++ ulong rxBufSize;
++ ulong rxPacketNum;
++ dslFrameHandlerType rxIndicateHandlerPtr;
++ dslFrameHandlerType txCompleteHandlerPtr;
++ } dslG997Cmd;
++#endif
++ struct
++ {
++ long msgId;
++ long msgType;
++ char *dataPtr;
++ } dslClearEocMsg;
++#endif
++ struct
++ {
++ ulong code;
++ uchar *valuePtr;
++ ulong length;
++ } dslDataRegister;
++ union
++ {
++ dslStatusHandlerType statusHandlerPtr;
++ dslCommandHandlerType commandHandlerPtr;
++ eyeHandlerType eyeHandlerPtr;
++ logHandlerType logHandlerPtr;
++#if defined(DEBUG_DATA_HANDLER)
++ debugDataHandlerType debugDataHandlerPtr;
++#endif
++ dslFrameHandlerType rxIndicateHandlerPtr;
++ dslFrameHandlerType txCompleteHandlerPtr;
++ dslDriverCallbackType driverCallback;
++ } handlerSpec;
++#if !defined(CHIP_SRC) || defined(DSL_FRAME_FUNCTIONS)
++ dslFrameFunctions DslFunctions;
++#endif
++ dslOLRMessage dslOLRRequest;
++ dslPwrMessage dslPwrMsg;
++ } param;
++ } dslCommandStruct;
++
++
++
++
++typedef struct
++ {
++ dslCommandHandlerType linkCommandHandlerPtr;
++ timerHandlerType linkTimerHandlerPtr;
++ dslLinkCloseHandlerType linkCloseHandlerPtr;
++
++ dslFrameHandlerType linkSendHandlerPtr;
++ dslFrameHandlerType linkReturnHandlerPtr;
++
++ dslVcAllocateHandlerType linkVcAllocateHandlerPtr;
++ dslVcFreeHandlerType linkVcFreeHandlerPtr;
++ dslVcActivateHandlerType linkVcActivateHandlerPtr;
++ dslVcDeactivateHandlerType linkVcDeactivateHandlerPtr;
++ dslVcConfigureHandlerType linkVcConfigureHandlerPtr;
++
++ dslLinkVc2IdHandlerType linkVc2IdHandlerPtr;
++ dslLinkVcId2VcHandlerType linkVcId2VcHandlerPtr;
++ dslGetFramePoolHandlerType linkGetFramePoolHandlerPtr;
++
++#ifndef ADSLCORE_ONLY
++ dslHeaderHandlerType linkRxCellHeaderHandlerPtr;
++ dslRxFrameBufferHandlerType linkRxCellDataHandlerPtr;
++ dslTxFrameBufferHandlerType linkTxCellHandlerPtr;
++#endif
++
++ txDataHandlerType linkTxDataHandlerPtr;
++ rxDataHandlerType linkRxDataHandlerPtr;
++ } linkLayerFunctions;
++
++#ifndef ADSLCORE_ONLY
++
++#define LinkLayerAssignFunctions( var, name_prefix ) do { \
++ (var).linkCommandHandlerPtr = name_prefix##CommandHandler; \
++ (var).linkTimerHandlerPtr = name_prefix##TimerHandler; \
++ (var).linkCloseHandlerPtr = name_prefix##CloseHandler; \
++ \
++ (var).linkSendHandlerPtr = name_prefix##SendFrameHandler; \
++ (var).linkReturnHandlerPtr = name_prefix##ReturnFrameHandler; \
++ \
++ (var).linkVcAllocateHandlerPtr = name_prefix##VcAllocateHandler; \
++ (var).linkVcFreeHandlerPtr = name_prefix##VcFreeHandler; \
++ (var).linkVcActivateHandlerPtr = name_prefix##VcActivateHandler; \
++ (var).linkVcDeactivateHandlerPtr = name_prefix##VcDeactivateHandler; \
++ (var).linkVcConfigureHandlerPtr = name_prefix##VcConfigureHandler; \
++ \
++ (var).linkVc2IdHandlerPtr = name_prefix##Vc2IdHandler; \
++ (var).linkVcId2VcHandlerPtr = name_prefix##VcId2VcHandler; \
++ (var).linkGetFramePoolHandlerPtr = name_prefix##GetFramePoolHandler; \
++ \
++ (var).linkRxCellHeaderHandlerPtr = name_prefix##RxCellHeaderHandler; \
++ (var).linkRxCellDataHandlerPtr = name_prefix##RxCellDataHandler; \
++ (var).linkTxCellHandlerPtr = name_prefix##TxCellHandler; \
++ \
++ (var).linkTxDataHandlerPtr = name_prefix##TxDataHandler; \
++ (var).linkRxDataHandlerPtr = name_prefix##RxDataHandler; \
++} while (0)
++
++#else
++
++#define LinkLayerAssignFunctions( var, name_prefix ) do { \
++ (var).linkCommandHandlerPtr = name_prefix##CommandHandler; \
++ (var).linkTimerHandlerPtr = name_prefix##TimerHandler; \
++ (var).linkCloseHandlerPtr = name_prefix##CloseHandler; \
++ \
++ (var).linkSendHandlerPtr = name_prefix##SendFrameHandler; \
++ (var).linkReturnHandlerPtr = name_prefix##ReturnFrameHandler; \
++ \
++ (var).linkVcAllocateHandlerPtr = name_prefix##VcAllocateHandler; \
++ (var).linkVcFreeHandlerPtr = name_prefix##VcFreeHandler; \
++ (var).linkVcActivateHandlerPtr = name_prefix##VcActivateHandler; \
++ (var).linkVcDeactivateHandlerPtr = name_prefix##VcDeactivateHandler; \
++ (var).linkVcConfigureHandlerPtr = name_prefix##VcConfigureHandler; \
++ \
++ (var).linkVc2IdHandlerPtr = name_prefix##Vc2IdHandler; \
++ (var).linkVcId2VcHandlerPtr = name_prefix##VcId2VcHandler; \
++ (var).linkGetFramePoolHandlerPtr = name_prefix##GetFramePoolHandler; \
++ \
++ (var).linkTxDataHandlerPtr = name_prefix##TxDataHandler; \
++ (var).linkRxDataHandlerPtr = name_prefix##RxDataHandler; \
++} while (0)
++
++#endif
++
++typedef struct
++ {
++ dslFrameHandlerType rxIndicateHandlerPtr;
++ dslFrameHandlerType txCompleteHandlerPtr;
++ dslStatusHandlerType statusHandlerPtr;
++ } upperLayerFunctions;
++
++
++/*
++ * Debug data
++ */
++#define kDslFirstDebugData 1000
++#define kDslXmtPerSymTimeCompData (kDslFirstDebugData + 0)
++#define kDslRcvPerSymTimeCompData (kDslFirstDebugData + 1)
++#define kDslXmtAccTimeCompData (kDslFirstDebugData + 2)
++#define kDslRcvAccTimeCompData (kDslFirstDebugData + 3)
++#define kDslRcvPilotToneData (kDslFirstDebugData + 4)
++#define kDslTEQCoefData (kDslFirstDebugData + 5)
++#define kDslTEQInputData (kDslFirstDebugData + 6)
++#define kDslTEQOutputData (kDslFirstDebugData + 7)
++#define kDslRcvFFTInputData (kDslFirstDebugData + 8)
++#define kDslRcvFFTOutputData (kDslFirstDebugData + 9)
++#define kDslRcvCarrierSNRData (kDslFirstDebugData + 10)
++#define kDslXmtToneOrderingData (kDslFirstDebugData + 11)
++#define kDslRcvToneOrderingData (kDslFirstDebugData + 12)
++#define kDslXmtGainData (kDslFirstDebugData + 13)
++#define kDslRcvGainData (kDslFirstDebugData + 14)
++#define kDslMseData (kDslFirstDebugData + 15)
++#define kDslFEQOutErrData (kDslFirstDebugData + 16)
++#define kDslFEQCoefData (kDslFirstDebugData + 17)
++#define kDslShowtimeMseData (kDslFirstDebugData + 18)
++#define kDslTimeEstimationHWPhaseTweak (kDslFirstDebugData + 24)
++#define kDslSlicerInput (kDslFirstDebugData + 40)
++#define kDslXmtConstellations (kDslFirstDebugData + 41)
++#define kDslSnr1ShiftData (kDslFirstDebugData + 50)
++#define kDslSnr1InputData (kDslFirstDebugData + 51)
++#define kDslSnr1ReverbAvgData (kDslFirstDebugData + 52)
++#define kDslAnnexCFextSnrData (kDslFirstDebugData + 53)
++#define kDslAnnexCNextSnrData (kDslFirstDebugData + 54)
++#define kG994p1OutputXmtSample (kDslFirstDebugData + 100)
++#define kG994p1OutputMicroBit (kDslFirstDebugData + 101)
++#define kG994p1OutputBit (kDslFirstDebugData + 102)
++#define kG994p1OutputTimer (kDslFirstDebugData + 103)
++
++/****************************************************************************/
++/* 2. Constant definitions. */
++/* */
++/* 2.1 Defininitive constants */
++/****************************************************************************/
++
++/* dslDirectionType */
++
++#define kATU_C 0
++#define kATU_R 1
++
++/* ATM setup maps */
++
++#define kAtmCallMgrEnabled 0x00000001 /* Bit 0 */
++#define kAtmAAL1FecEnabledMask 0x00000006 /* Bit 1 */
++#define kAtmAAL1HiDelayFecEnabled 0x00000002 /* Bit 2 */
++#define kAtmAAL1LoDelayFecEnabled 0x00000004 /* Bit 3 */
++
++/* dslLinkLayerType */
++
++#define kNoDataLink 0
++#define kAtmLink 0x00000001
++#define kAtmPhyLink 0x00000002
++#define kDslPacketLink 0x00000003
++#define kDslPacketPhyLink 0x00000004
++
++/* dslModulationType */
++#define kNoCommonModulation 0x00000000
++#define kG994p1 0x00000020 /* G.994.1 or G.hs */
++#define kT1p413 0x00000040 /* T1.413 handshaking */
++#define kG992p1AnnexA 0x00000001 /* G.992.1 or G.dmt Annex A */
++#define kG992p1AnnexB 0x00000002 /* G.992.1 or G.dmt Annex B */
++#define kG992p1AnnexC 0x00000004 /* G.992.1 or G.dmt Annex C */
++#define kG992p2AnnexAB 0x00000008 /* G.992.2 or G.lite Annex A/B */
++#define kG992p2AnnexC 0x00000010 /* G.992.2 or G.lite Annex C */
++#define kG992p3AnnexA 0x00000100 /* G.992.3 or G.DMTbis Annex A */
++#define kG992p3AnnexB 0x00000200 /* G.992.3 or G.DMTbis Annex A */
++#define kG992p1AnnexI 0x00000400 /* G.992.1 Annex I */
++#define kG992p5AnnexA 0x00010000 /* G.992.5 Annex A */
++#define kG992p5AnnexB 0x00020000 /* G.992.5 Annex B */
++#define kG992p5AnnexI 0x00040000 /* G.992.5 Annex I */
++#define kG992p3AnnexM 0x00080000 /* G.992.3 Annex M */
++#define kG992p5AnnexM 0x01000000 /* G.992.5 Annex M */
++
++/* demodCapabilities bitmap */
++#define kEchoCancellorEnabled 0x00000001
++#define kSoftwareTimeErrorDetectionEnabled 0x00000002
++#define kSoftwareTimeTrackingEnabled 0x00000004
++#define kDslTrellisEnabled 0x00000008
++#define kHardwareTimeTrackingEnabled 0x00000010
++#define kHardwareAGCEnabled 0x00000020
++#define kDigitalEchoCancellorEnabled 0x00000040
++#define kReedSolomonCodingEnabled 0x00000080
++#define kAnalogEchoCancellorEnabled 0x00000100
++#define kT1p413Issue1SingleByteSymMode 0x00000200
++#define kDslAturXmtPowerCutbackEnabled 0x00000400
++#ifdef G992_ANNEXC_LONG_REACH
++#define kDslAnnexCPilot48 0x00000800
++#define kDslAnnexCReverb33_63 0x00001000
++#endif
++#ifdef G992_ANNEXC
++#define kDslCentilliumCRCWorkAroundEnabled 0x00002000
++#else
++#define kDslEnableRoundUpDSLoopAttn 0x00002000
++#endif
++#define kDslBitSwapEnabled 0x00004000
++#define kDslADILowRateOptionFixDisabled 0x00008000
++#define kDslAnymediaGSPNCrcFixEnabled 0x00010000
++#define kDslMultiModesPreferT1p413 0x00020000
++#define kDslT1p413UseRAck1Only 0x00040000
++#define kDslUE9000ADI918FECFixEnabled 0x00080000
++#define kDslG994AnnexAMultimodeEnabled 0x00100000
++#define kDslATUCXmtPowerMinimizeEnabled 0x00200000
++#define kDropOnDataErrorsDisabled 0x00400000
++#define kDslSRAEnabled 0x00800000
++
++#define kDslT1p413HigherToneLevelNeeded 0x01000000
++#define kDslT1p413SubsampleAlignmentEnabled 0x02000000
++#define kDslT1p413DisableUpstream2xIfftMode 0x04000000
++
++/* test mode related demodCapabilities, for internal use only */
++#define kDslTestDemodCapMask 0xF8000000
++#define kDslSendReverbModeEnabled 0x10000000
++#define kDslSendMedleyModeEnabled 0x20000000
++#define kDslAutoRetrainDisabled 0x40000000
++#define kDslPllWorkaroundEnabled 0x80000000
++#define kDslAfeLoopbackModeEnabled 0x08000000
++
++/* demodCapabilities bitmap2 */
++
++#define kDslAnnexCProfile1 0x00000001
++#define kDslAnnexCProfile2 0x00000002
++#define kDslAnnexCProfile3 0x00000004
++#define kDslAnnexCProfile4 0x00000008
++#define kDslAnnexCProfile5 0x00000010
++#define kDslAnnexCProfile6 0x00000020
++#define kDslAnnexCPilot64 0x00000040
++#define kDslAnnexCPilot48 0x00000080
++#define kDslAnnexCPilot32 0x00000100
++#define kDslAnnexCPilot16 0x00000200
++#define kDslAnnexCA48B48 0x00000400
++#define kDslAnnexCA24B24 0x00000800
++#define kDslAnnexCReverb33_63 0x00001000
++#define kDslAnnexCCReverb6_31 0x00002000
++
++#define kDslAnnexIShapedSSVI 0x00004000
++#define kDslAnnexIFlatSSVI 0x00008000
++
++#define kDslAnnexIPilot64 0x00010000
++#define kDslAnnexIA48B48 0x00020000
++#define kDslAnnexIPilot128 0x00040000
++#define kDslAnnexIPilot96 0x00080000
++
++/* Features bitmap */
++#define kG992p2RACK1 0x00000001
++#define kG992p2RACK2 0x00000002
++#define kG992p2DBM 0x00000004
++#define kG992p2FastRetrain 0x00000008
++#define kG992p2RS16 0x00000010
++#define kG992p2ClearEOCOAM 0x00000020
++#define kG992NTREnabled 0x00000040
++#define kG992p2EraseAllStoredProfiles 0x00000080
++#define kG992p2FeaturesNPar2Mask 0x0000003B
++#define kG992p2FeaturesNPar2Shift 0
++
++#define kG992p1RACK1 0x00000100
++#define kG992p1RACK2 0x00000200
++#define kG992p1STM 0x00000800
++#define kG992p1ATM 0x00001000
++#define kG992p1ClearEOCOAM 0x00002000
++#define kG992p1FeaturesNPar2Mask 0x00003B00
++#define kG992p1FeaturesNPar2Shift 8
++#define kG992p1DualLatencyUpstream 0x00004000
++#define kG992p1DualLatencyDownstream 0x00008000
++#define kG992p1HigherBitRates 0x40000000
++
++#if defined(G992P1_ANNEX_I)
++#define kG992p1HigherBitRates1over3 0x80000000
++#define kG992p1AnnexIShapedSSVI 0x00000001
++#define kG992p1AnnexIFlatSSVI 0x00000002
++#define kG992p1AnnexIPilotFlag 0x00000008
++#define kG992p1AnnexIPilot64 0x00000001
++#define kG992p1AnnexIPilot128 0x00000004
++#define kG992p1AnnexIPilot96 0x00000008
++#define kG992p1AnnexIPilotA48B48 0x00000010
++#endif
++
++#define kG992p1AnnexBRACK1 0x00010000
++#define kG992p1AnnexBRACK2 0x00020000
++#define kG992p1AnnexBUpstreamTones1to32 0x00040000
++#define kG992p1AnnexBSTM 0x00080000
++#define kG992p1AnnexBATM 0x00100000
++#define kG992p1AnnexBClearEOCOAM 0x00200000
++#define kG992p1AnnexBFeaturesNPar2Mask 0x003F0000
++#define kG992p1AnnexBFeaturesNPar2Shift 16
++
++#define kG992p1AnnexCRACK1 0x01000000
++#define kG992p1AnnexCRACK2 0x02000000
++#define kG992p1AnnexCDBM 0x04000000
++#define kG992p1AnnexCSTM 0x08000000
++#define kG992p1AnnexCATM 0x10000000
++#define kG992p1AnnexCClearEOCOAM 0x20000000
++#define kG992p1AnnexCFeaturesNPar2Mask 0x3F000000
++#define kG992p1AnnexCFeaturesNPar2Shift 24
++
++#define kG992p1HigherBitRates1over3 0x80000000
++
++/* auxFeatures bitmap */
++#define kG994p1PreferToExchangeCaps 0x00000001
++#define kG994p1PreferToDecideMode 0x00000002
++#define kG994p1PreferToMPMode 0x00000004
++#define kAfePwmSyncClockShift 3
++#define kAfePwmSyncClockMask (0xF << kAfePwmSyncClockShift)
++#define AfePwmSyncClockEnabled(val) (((val) & kAfePwmSyncClockMask) != 0)
++#define AfePwmGetSyncClockFreq(val) ((((val) & kAfePwmSyncClockMask) >> kAfePwmSyncClockShift) - 1)
++#define AfePwmSetSyncClockFreq(val,freq) ((val) |= ((((freq)+1) << kAfePwmSyncClockShift) & kAfePwmSyncClockMask))
++
++/* SubChannel Info bitMap for G992p1 */
++#define kSubChannelASODownstream 0x00000001
++#define kSubChannelAS1Downstream 0x00000002
++#define kSubChannelAS2Downstream 0x00000004
++#define kSubChannelAS3Downstream 0x00000008
++#define kSubChannelLSODownstream 0x00000010
++#define kSubChannelLS1Downstream 0x00000020
++#define kSubChannelLS2Downstream 0x00000040
++#define kSubChannelLS0Upstream 0x00000080
++#define kSubChannelLS1Upstream 0x00000100
++#define kSubChannelLS2Upstream 0x00000200
++#define kSubChannelInfoOctet1Mask 0x0000001F
++#define kSubChannelInfoOctet2Mask 0x000003E0
++#define kSubChannelInfoOctet1Shift 0
++#define kSubChannelInfoOctet2Shift 5
++
++/****************************************************************************/
++/* 3. Interface functions. */
++/* */
++/****************************************************************************/
++
++#ifdef G992P1
++#if defined(G992P1_ANNEX_I2X) || defined(G992P5)
++/* lke */
++#define kDslSamplingFreq 4416000
++#define kDslMaxFFTSize 1024
++#define kDslMaxFFTSizeShift 10
++#elif defined(G992P1_ANNEX_I4X)
++#define kDslSamplingFreq 8832000
++#define kDslMaxFFTSize 2048
++#define kDslMaxFFTSizeShift 11
++#elif defined(G992P1_ANNEX_I8X)
++#define kDslSamplingFreq 17664000
++#define kDslMaxFFTSize 4096
++#define kDslMaxFFTSizeShift 12
++#else
++#define kDslSamplingFreq 2208000
++#define kDslMaxFFTSize 512
++#define kDslMaxFFTSizeShift 9
++#endif
++#else
++#define kDslSamplingFreq 1104000
++#define kDslMaxFFTSize 256
++#define kDslMaxFFTSizeShift 8
++#endif
++
++#if defined(G992_ATUR_UPSTREAM_SAMPLING_FREQ_276KHZ)
++#define kDslATURUpstreamSamplingFreq 276000
++#define kDslATURFFTSizeShiftUpstream 6
++#elif defined(G992_ATUR_UPSTREAM_SAMPLING_FREQ_552KHZ)
++#define kDslATURUpstreamSamplingFreq 552000
++#define kDslATURFFTSizeShiftUpstream 7
++#else
++#define kDslATURUpstreamSamplingFreq kDslSamplingFreq
++#define kDslATURFFTSizeShiftUpstream kDslMaxFFTSizeShift
++#endif
++
++#if defined(G992_ATUC_UPSTREAM_SAMPLING_FREQ_276KHZ)
++#define kDslATUCUpstreamSamplingFreq 276000
++#define kDslATUCFFTSizeShiftUpstream 6
++#elif defined(G992_ATUC_UPSTREAM_SAMPLING_FREQ_552KHZ)
++#define kDslATUCUpstreamSamplingFreq 552000
++#define kDslATUCFFTSizeShiftUpstream 7
++#else
++#define kDslATUCUpstreamSamplingFreq kDslSamplingFreq
++#define kDslATUCFFTSizeShiftUpstream kDslMaxFFTSizeShift
++#endif
++
++#define kDslMaxSamplesPerSymbol (kDslMaxFFTSize+kDslMaxFFTSize/16)
++
++#if defined(G992P1_ANNEX_I) || defined(G992P5)
++#define kDslMaxTEQLength 32
++#else
++#define kDslMaxTEQLength 16
++#endif
++
++#define kDslMaxSymbolBlockSize 1
++#define kDslMaxSampleBlockSize (kDslMaxSymbolBlockSize*kDslMaxSamplesPerSymbol)
++
++#ifdef G992_ANNEXC
++#define kG992AnnexCXmtToRcvPathDelay 512 /* In samples at kDslSamplingFreq */
++#endif
++
++/*** For compatibility with existing test codes ***/
++#if !defined(TARG_OS_RTEMS)
++typedef dslStatusCode modemStatusCode;
++typedef dslStatusStruct modemStatusStruct;
++typedef dslStatusHandlerType statusHandlerType;
++typedef dslCommandCode modemCommandCode;
++typedef dslCommandStruct modemCommandStruct;
++typedef dslCommandHandlerType commandHandlerType;
++#endif
++
++extern void SM_DECL SoftDslSetRefData (void *gDslVars, ulong refData);
++extern ulong SM_DECL SoftDslGetRefData (void *gDslVars);
++extern int SM_DECL SoftDslGetMemorySize(void);
++extern void SM_DECL SoftDslInit (void *gDslVars);
++extern void SM_DECL SoftDslReset (void *gDslVars);
++extern void SM_DECL SoftDslLineHandler (void *gDslVars, int rxNSamps, int txNSamps, short *rcvPtr, short *xmtPtr) FAST_TEXT;
++extern Boolean SM_DECL SoftDslCommandHandler (void *gDslVars, dslCommandStruct *cmdPtr);
++
++/* swap Lmem functions */
++#if defined(bcm47xx) && defined(SWAP_LMEM)
++extern int SoftDslSwapLmem(void *gDslVars, int sectionN, int imageN);
++extern void init_SoftDslSwapLmem(void);
++#endif
++
++/* SoftDsl time functions */
++
++extern ulong SM_DECL SoftDslGetTime(void *gDslVars);
++#define __SoftDslGetTime(gv) gDslGlobalVarPtr->execTime
++
++extern void SM_DECL SoftDslTimer(void *gDslVars, ulong timeMs);
++
++/* SoftDsl IO functions */
++
++extern void SM_DECL SoftDslClose (void *gDslVars);
++extern int SM_DECL SoftDslSendFrame (void *gDslVars, void *pVc, ulong mid, dslFrame * pFrame);
++extern int SM_DECL SoftDslReturnFrame (void *gDslVars, void *pVc, ulong mid, dslFrame * pFrame);
++
++/* SoftDsl connection functions */
++
++extern void* SM_DECL SoftDslVcAllocate(void *gDslVars, dslVcParams *pVcParams);
++extern void SM_DECL SoftDslVcFree(void *gDslVars, void *pVc);
++extern Boolean SM_DECL SoftDslVcActivate(void *gDslVars, void *pVc);
++extern void SM_DECL SoftDslVcDeactivate(void *gDslVars, void *pVc);
++extern Boolean SM_DECL SoftDslVcConfigure(void *gDslVars, void *pVc, ulong mid, dslVcParams *pVcParams);
++
++/* Special functions for LOG support */
++
++extern ulong SM_DECL SoftDslVc2Id(void *gDslVars, void *pVc);
++extern void* SM_DECL SoftDslVcId2Vc(void *gDslVars, ulong vcId);
++extern void* SM_DECL SoftDslGetFramePool(void *gDslVars);
++
++/* Functions for host mode execution */
++
++extern void* SM_DECL SoftDslRxCellHeaderHandler (void *gDslVars, ulong hdr, uchar hdrHec);
++extern void* SM_DECL SoftDslRxCellDataHandler (void *gDslVars, int, void*);
++extern void* SM_DECL SoftDslTxCellHandler (void *gDslVars, int*, void*);
++extern Boolean SM_DECL SoftDslPhyCommandHandler (void *gDslVars, dslCommandStruct *cmdPtr);
++
++/* Functions getting OEM parameters including G994 non standard info management */
++
++extern char* SM_DECL SoftDslGetTrainingVendorIDString(void *gDslVars);
++extern char* SM_DECL SoftDslGetVendorIDString(void *gDslVars);
++extern char* SM_DECL SoftDslGetSerialNumberString(void *gDslVars);
++extern char* SM_DECL SoftDslGetRevString(void *gDslVars);
++extern int SM_DECL SoftDslRevStringSize(void *gDslVars);
++extern int SM_DECL SoftDslSerNumStringSize(void *gDslVars);
++
++extern void* SM_DECL SoftDslGetG994p1RcvNonStdInfo(void *gDslVars, ulong *pLen);
++extern void* SM_DECL SoftDslGetG994p1XmtNonStdInfo(void *gDslVars, ulong *pLen);
++
++#ifdef G997_1_FRAMER
++
++/* G997 functions */
++
++extern int SM_DECL SoftDslG997SendFrame (void *gDslVars, void *pVc, ulong mid, dslFrame * pFrame);
++extern int SM_DECL SoftDslG997ReturnFrame (void *gDslVars, void *pVc, ulong mid, dslFrame * pFrame);
++
++#endif
++
++#ifdef ADSL_MIB
++extern void * SM_DECL SoftDslMibGetData (void *gDslVars, int dataId, void *pAdslMibData);
++#endif
++
++#define SoftDsl SoftDslLineHandler
++#define kSoftDslMaxMemorySize (32768*16384)
++
++/*
++ * Internal functions
++ */
++
++extern void SoftDslStatusHandler (void *gDslVars, dslStatusStruct *status) FAST_TEXT;
++extern void SoftDslInternalStatusHandler (void *gDslVars, dslStatusStruct *status);
++
++/*
++ * DSL OS functions
++ */
++
++#ifdef DSL_OS
++
++#define SoftDslIsBgAvailable(gDslVars) (DSLOS_THREAD_INACTIVE == DslOsGetThreadState(&(gDslGlobalVarPtr->tcbDslBg)))
++#define SoftDslGetBgThread(gDslVars) \
++ ((DSLOS_THREAD_INACTIVE != DslOsGetThreadState(&(gDslGlobalVarPtr->tcbDslBg))) ? &gDslGlobalVarPtr->tcbDslBg : NULL)
++#define SoftDslBgStart(gDslVars, pFunc) \
++ DslOsCreateThread(&gDslGlobalVarPtr->tcbDslBg, DSLOS_PRIO_HIGHEST - 10, pFunc, gDslVars, \
++ WB_ADDR(gDslGlobalVarPtr->bgStack), sizeof(gDslGlobalVarPtr->bgStack))
++#define SoftDslBgStop(gDslVars) DslOsDeleteThread(&gDslGlobalVarPtr->tcbDslBg)
++
++#define SoftDslEnterCritical() DslOsEnterCritical()
++#define SoftDslLeaveCritical(id) DslOsLeaveCritical(id)
++
++#else
++
++#define SoftDslIsBgAvailable(gDslVars) 1
++#define SoftDslGetBgThread(gDslVars) 1
++#define SoftDslBgStart(gDslVars, pFunc) (*pFunc)(gDslVars)
++#define SoftDslBgStop(gDslVars)
++
++#define SoftDslEnterCritical() 0
++#define SoftDslLeaveCritical(id)
++
++#endif
++
++/*
++ * DSL frames and native frame functions
++ */
++
++DslFrameDeclareFunctions (DslFrameNative)
++
++/*
++ * These functions are for testing purpose, they are defined outside.
++ */
++#ifdef STACK_SIZE_REQUIREMENT_TEST
++extern void StackSizeTestInitializeStackBeforeEntry(void);
++extern void StackSizeTestCheckStackAfterExit(void);
++extern void StackSizeTestBackupStack(void);
++extern void StackSizeTestRestoreStack(void);
++#endif /* STACK_SIZE_REQUIREMENT_TEST */
++
++#ifdef NEC_NSIF_WORKAROUND
++#define SoftDslGetG994NsStatus(gDslVars) (gDslGlobalVarPtr->G994NsStatus)
++#define SoftDslGetG994NsFailCounter(gDslVars) (gDslGlobalVarPtr->G994NsFailCounter)
++#endif
++
++#endif /* SoftDslHeader */
+diff -urN linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/SoftModem.h linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/SoftModem.h
+--- linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/SoftModem.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/SoftModem.h 2006-06-26 09:07:10.000000000 +0200
+@@ -0,0 +1,3128 @@
++/*
++<:copyright-broadcom
++
++ Copyright (c) 2002 Broadcom Corporation
++ All Rights Reserved
++ No portions of this material may be reproduced in any form without the
++ written permission of:
++ Broadcom Corporation
++ 16215 Alton Parkway
++ Irvine, California 92619
++ All information contained in this document is Broadcom Corporation
++ company private, proprietary, and trade secret.
++
++:>
++*/
++/****************************************************************************
++ *
++ * SoftModem.h
++ *
++ *
++ * Description:
++ * This file contains the exported interface for SoftModem.c
++ *
++ *
++ * Copyright (c) 1993-1998 AltoCom, Inc. All rights reserved.
++ * Authors: Mark Gonikberg, Haixiang Liang.
++ *
++ * $Revision: 1.16 $
++ *
++ * $Id: SoftModem.h,v 1.16 2004/04/14 21:16:51 ilyas Exp $
++ *
++ * $Log: SoftModem.h,v $
++ * Revision 1.16 2004/04/14 21:16:51 ilyas
++ * Merged with the latest changes in ADSL driver
++ *
++ * Revision 1.15 2004/04/13 00:56:10 ilyas
++ * Merged the latest ADSL driver changes for RTEMS
++ *
++ * Revision 1.14 2004/04/13 00:16:59 ilyas
++ * Merged the latest ADSL driver changes
++ *
++ * Revision 1.13 2003/02/22 05:07:11 ilyas
++ * Added VendorID for T1.413 mode
++ *
++ * Revision 1.12 2002/10/03 19:34:24 ilyas
++ * Added size for EOC serial number register
++ *
++ * Revision 1.11 2002/09/07 01:37:22 ilyas
++ * Added support for OEM parameters
++ *
++ * Revision 1.10 2001/12/13 02:25:34 ilyas
++ * Added definitions for G997
++ *
++ * Revision 1.9 2001/11/30 05:56:34 liang
++ * Merged top of the branch AnnexBDevelopment onto top of the tree.
++ *
++ * Revision 1.7.2.2 2001/11/27 02:32:05 liang
++ * Combine vendor ID, serial #, and version number into SoftModemVersionNumber.c.
++ *
++ * Revision 1.7.2.1 2001/10/03 01:44:10 liang
++ * Merged with codes from main tree (tag SoftDsl_2_18).
++ *
++ * Revision 1.8 2001/09/21 19:19:01 ilyas
++ * Minor fixes for VxWorks build
++ *
++ * Revision 1.7 2000/07/17 21:08:16 lkaplan
++ * removed global pointer
++ *
++ * Revision 1.6 2000/05/03 04:09:11 ilyas
++ * Added ID for ATM log data
++ *
++ * Revision 1.5 2000/04/01 01:07:44 liang
++ * Changed file names and some module names.
++ *
++ * Revision 1.4 2000/03/02 20:18:12 ilyas
++ * Added test status code for ATM VC finished
++ *
++ * Revision 1.3 1999/08/05 20:02:11 liang
++ * Merged with the softmodem top of the tree on 08/04/99.
++ *
++ * Revision 1.2 1999/01/27 22:19:08 liang
++ * Merge with SoftModem_3_1_02.
++ * Include SoftDsl.h conditionlly so that the test utilities from SoftModem
++ * can be used without major change. It can be merged easily to SoftModem.
++ *
++ * Revision 1.170 1998/12/22 00:52:52 liang
++ * Added auxFeatures bit kV8HoldANSamUntilDetCI. When it is set, ANSam won't be
++ * sent until CI is detected (normally ANSam will be sent after 200ms). This is
++ * useful in V34 half duplex fax mode.
++ *
++ * Revision 1.169 1998/12/19 04:46:52 mwg
++ * Added bits for fax/data calling tones
++ *
++ * Revision 1.168 1998/12/17 02:46:10 scott
++ * Removed overlay-related commands/statuses and added
++ * kSetTrainingDelayReductionCmd
++ *
++ * Revision 1.167 1998/12/12 03:17:42 scott
++ * Added overlay commands and statuses
++ *
++ * Revision 1.166 1998/12/02 05:34:23 mwg
++ * Fixed a problem with bong tone detection
++ *
++ * Revision 1.165 1998/11/26 00:22:44 yura
++ * Added two more log data types: modulatorInputData & modulatorOutputData
++ *
++ * Revision 1.164 1998/11/19 03:08:04 mwg
++ * Added kSetCallProgressParamsCmd
++ *
++ * Revision 1.163 1998/11/18 23:00:03 liang
++ * Added a separate command kLoopbackTestAutoRespEnableCmd to enable or disable
++ * the loopback test auto respond feature when the modem is already on-line.
++ *
++ * Revision 1.162 1998/11/13 20:50:21 scott
++ * SoftModemInternalStatusHandler is now SM_DECL as well
++ *
++ * Revision 1.161 1998/11/13 20:42:25 scott
++ * Added SM_DECL type to entrypoint functions
++ *
++ * Revision 1.160 1998/11/13 03:02:54 scott
++ * Added SoftModemTimer prototype.
++ * Also include V.8bis types if AT_COMMANDS_V8BIS is defined.
++ *
++ * Revision 1.159 1998/11/12 01:22:46 scott
++ * Increased number of AT registers to 46
++ *
++ * Revision 1.158 1998/11/05 22:35:18 yura
++ * Added two more S-registers
++ *
++ * Revision 1.157 1998/11/05 03:09:54 mwg
++ * Added kLapmRetryFailed to the list of LAPM errors
++ *
++ * Revision 1.156 1998/11/05 00:13:20 liang
++ * Add new connectionInfo status kLoopbackSelfTestNewErrs to report
++ * new bit errors whenever it happens.
++ *
++ * Revision 1.155 1998/11/04 07:11:33 mwg
++ * Moved declaration for SoftModemATPrintf() to SoftModem.h
++ *
++ * Revision 1.154 1998/10/29 07:24:49 mwg
++ * *** empty log message ***
++ *
++ * Revision 1.153 1998/10/15 02:09:37 luisgm
++ * added separate data rate mask for Flex to dataPumpCapabilities structure
++ *
++ * Revision 1.152 1998/10/14 00:12:15 scott
++ * Added kMnpOOBFrameCmd and command.frameSpec
++ *
++ * Revision 1.151 1998/10/09 02:19:22 luisgm
++ * added FlexV8bisStruct member to dataPumpCapabilities struc to store flex v8bis info, added define for kFlexSkipV8bis
++ *
++ * Revision 1.150 1998/10/06 19:36:33 mwg
++ * Limited 56K rates to 53K
++ *
++ * Revision 1.149 1998/10/03 03:43:38 ilyas
++ * Added status codes for Audio
++ *
++ * Revision 1.148 1998/10/01 02:03:17 mwg
++ * Added external pulse dialer option
++ *
++ * Revision 1.147 1998/09/30 01:44:26 mwg
++ * Added new functions SoftModemGetWriteBufferSize() & SoftModemGetReadBufferSize()
++ *
++ * Revision 1.146 1998/09/22 03:44:38 scott
++ * Added ALWAYS_LONG_ALIGN() macro
++ *
++ * Revision 1.145 1998/09/21 21:49:22 scott
++ * Added logDataCodes for mnpDecoder(Input/Output)Data
++ *
++ * Revision 1.144 1998/08/31 22:57:21 luisgm
++ * added constants for Flex data rates + kFlexEventTRN2AFinished
++ *
++ * Revision 1.143 1998/08/18 05:09:53 mwg
++ * Increased AT command buffer size to 128
++ *
++ * Revision 1.142 1998/08/18 03:45:54 ilyas
++ * Integrated Audio into V70 test
++ *
++ * Revision 1.141 1998/08/14 17:46:04 ilyas
++ * Integrated Audio and G729a
++ *
++ * Revision 1.140 1998/08/10 21:42:19 mwg
++ * Added space and mark parity
++ *
++ * Revision 1.139 1998/08/08 03:39:33 scott
++ * Moved the C6xDefs and PentiumDefs includes before the internal function
++ * prototypes (to permit their redefinitions)
++ *
++ * Revision 1.138 1998/08/07 20:37:27 yura
++ * Added new S-register for &T commands
++ *
++ * Revision 1.137 1998/08/01 05:22:09 mwg
++ * Implemented split memory model
++ *
++ * Revision 1.136 1998/07/22 02:12:22 liang
++ * Added self test mode for loopback test.
++ *
++ * Revision 1.135 1998/07/21 01:19:03 liang
++ * Changed loopback test command parameter interface to use regular modeSpec.
++ *
++ * Revision 1.134 1998/07/18 03:52:10 liang
++ * Added V54 loop 2 test for V22.
++ *
++ * Revision 1.133 1998/07/15 02:45:03 mwg
++ * Added new connection info code: kPCMSpectralShapingBits
++ *
++ * Revision 1.132 1998/07/15 00:18:48 liang
++ * Add special turn off command for V34 fax to handle different turn off procedures.
++ *
++ * Revision 1.131 1998/07/13 22:19:49 liang
++ * Add V8 CI detection status and ANSam disable aux feature.
++ *
++ * Revision 1.130 1998/07/08 17:09:13 scott
++ * Added USE_LONG_ALIGN; support for 6 and PentiumDefs.h files
++ *
++ * Revision 1.129 1998/07/03 23:28:13 mwg
++ * Added Fax Class 2 defines
++ *
++ * Revision 1.128 1998/07/03 23:17:33 mwg
++ * Insuread command/status structures are long aligned
++ *
++ * Revision 1.127 1998/06/23 16:48:01 mwg
++ * Fixed a longstanding problem typical for Win95 VxD: whenever new
++ * VxD is intalled the confuguration profile may not match the old one but
++ * since the crc is correct it is still being downloaded. To avoid the problem
++ * a crc for the version number was added to avoid confusion between profiles
++ * of different versions.
++ *
++ * Revision 1.126 1998/06/19 21:04:06 liang
++ * Add auxiliary feature bit kV90ServerNotDetSbarAfterJdbarFix.
++ *
++ * Revision 1.125 1998/06/11 22:48:14 liang
++ * Add kPCM28000bpsShift constant.
++ *
++ * Revision 1.124 1998/06/05 22:11:51 liang
++ * New V90 DIL works through data mode.
++ *
++ * Revision 1.123 1998/06/01 23:03:41 liang
++ * Add v90RcvdDilDiffData logging.
++ *
++ * Revision 1.122 1998/06/01 21:24:38 mwg
++ * Changed some of the names.
++ *
++ * Revision 1.121 1998/05/13 04:55:22 mwg
++ * Now passing the number of spectral shaping bits in aux features
++ *
++ * Revision 1.120 1998/05/13 02:53:13 liang
++ * Add field "value" to command param structure.
++ *
++ * Revision 1.119 1998/05/12 04:42:23 mwg
++ * Replaced some of the status messages
++ *
++ * Revision 1.118 1998/05/11 23:36:10 mwg
++ * Added 8000Hz symbol rate to the map
++ *
++ * Revision 1.117 1998/05/05 04:28:39 liang
++ * V90 works up to data mode first version.
++ *
++ * Revision 1.116 1998/04/21 09:36:45 mwg
++ * Fixed a few problems for 16Khz and added 32Khz.
++ *
++ * Revision 1.115 1998/04/17 22:33:54 liang
++ * Added V90 DIL for mu-law PCM.
++ *
++ * Revision 1.114 1998/04/15 22:36:39 mwg
++ * Added new parameters to kDialCmd to allow individual control of each
++ * DTMF group attenuation.
++ *
++ * Revision 1.113 1998/04/15 18:16:22 ilyas
++ * Integrated V.8bis and changed coding of LinkLayerType to bitMap
++ *
++ * Revision 1.112 1998/04/15 07:59:06 mwg
++ * Added new status codes for V.90
++ *
++ * Revision 1.111 1998/04/11 00:29:16 mwg
++ * Fixed the warnings which appeared when Irix builds were upgraded to
++ * gcc 2.8.1
++ *
++ * Revision 1.110 1998/04/11 00:25:01 ilyas
++ * More V.70 statuses
++ *
++ * Revision 1.109 1998/04/10 23:29:31 mwg
++ * Added new field to capabilities: dataRates56K
++ *
++ * Revision 1.108 1998/04/09 02:02:56 mwg
++ * Added status for Ja detection.
++ *
++ * Revision 1.107 1998/04/03 02:05:30 ilyas
++ * More V.70 commands added
++ *
++ * Revision 1.106 1998/04/02 06:15:39 mwg
++ * Added coding type (Mu-law/A-law) status reporting.
++ *
++ * Revision 1.105 1998/03/30 09:53:57 mwg
++ * Added definition for k56Flex modulation for future use.
++ *
++ * Revision 1.104 1998/03/27 17:56:09 ilyas
++ * Added definitions for V.70
++ *
++ * Revision 1.103 1998/03/26 23:29:04 liang
++ * Added first version of IMD estimation.
++ *
++ * Revision 1.102 1998/03/20 04:37:26 mwg
++ * Increased the size of the nominal variance to 32 bit.
++ *
++ * Revision 1.101 1998/03/06 01:22:04 yura
++ * Improved Win95 VxD segmentation handling
++ *
++ * Revision 1.100 1998/03/06 01:06:18 liang
++ * Add initial version of V90 phase 1 and 2.
++ *
++ * Revision 1.99 1998/03/05 23:42:22 mwg
++ * (hxl) Implemented enable/disable call waiting command.
++ *
++ * Revision 1.98 1998/02/26 06:13:06 mwg
++ * Increased the number of AT S-registers to account for newly introduced
++ * S9 and S10.
++ *
++ * Revision 1.97 1998/02/25 18:18:25 scott
++ * Added v42bisCycleCount for V42BIS_THROUGHPUT_CONTROL
++ *
++ * Revision 1.96 1998/02/24 05:31:20 mwg
++ * Added stuff required by international version of AT command processor.
++ *
++ * Revision 1.95 1998/02/17 01:14:10 scott
++ * Reenabled sys/types.h for Linux builds
++ *
++ * Revision 1.94 1998/02/16 22:32:23 scott
++ * Changed copyright notice
++ *
++ * Revision 1.93 1998/02/16 22:17:44 scott
++ * Turned off include of sys/types.h for normal builds
++ *
++ * Revision 1.92 1998/02/16 21:53:28 scott
++ * Exclude sys/types.h for another compiler
++ *
++ * Revision 1.91 1998/02/09 18:24:10 scott
++ * Fixed ComplexShort type to work around bugs in MS and GreenHill compilers
++ *
++ * Revision 1.90 1998/01/27 01:37:36 mwg
++ * Added new log identifier for pcm infidelity data.
++ *
++ * Revision 1.89 1998/01/22 19:49:32 liang
++ * Add auxFeature bit kFaxV34HDXAllowAsymCtrlChan.
++ *
++ * Revision 1.88 1998/01/21 02:32:01 liang
++ * Add more V34 half duplex training progress codes.
++ *
++ * Revision 1.87 1997/12/23 03:28:25 liang
++ * Add more half duplex V34 related constants.
++ *
++ * Revision 1.86 1997/12/18 19:38:50 scott
++ * Added agcData log type.
++ * Added kDisableFaxFastClearDown demod capability
++ *
++ * Revision 1.85 1997/12/18 06:02:45 mwg
++ * Added a function to reenable DC offset tracking.
++ *
++ * Revision 1.84 1997/12/17 22:46:30 mwg
++ * Minor modifications to X2 escape status reporting.
++ *
++ * Revision 1.83 1997/12/16 06:49:45 mwg
++ * Implemented proper data rate reporting for PCM modem.
++ *
++ * Revision 1.82 1997/12/13 06:11:08 mwg
++ * Added X2 interface hooks
++ *
++ * Revision 1.81 1997/12/02 06:21:33 mwg
++ * Implemented kSetATRegister command.
++ *
++ * Revision 1.80 1997/11/27 02:11:41 liang
++ * Add code for half duplex V34 control channel.
++ *
++ * Revision 1.79 1997/11/19 19:52:48 guy
++ * Added constant to define V.34 half duplex operation
++ *
++ * Revision 1.78 1997/10/24 05:15:53 scott
++ * Added AGC and phase hit recovery to demodCapabilities
++ *
++ * Revision 1.77 1997/10/01 02:47:50 liang
++ * Add PCM interface.
++ *
++ * Revision 1.76 1997/09/29 15:48:04 yura
++ * Added #pragma statement for W95 Vxd
++ *
++ * Revision 1.75 1997/09/18 20:32:39 scott
++ * Do not include VxD support files if GENERATE_DEPENDENCIES is defined.
++ *
++ * Revision 1.74 1997/09/18 12:40:55 yura
++ * Removed #ifdef statments to be more robust
++ *
++ * Revision 1.73 1997/09/17 17:32:41 scott
++ * Do not include sys/types.h for 6
++ *
++ * Revision 1.72 1997/08/08 00:53:48 mwg
++ * Added fields for LAP-M frames printout.
++ * Added fields in auxFeatures to pass preemphasis filter parameters
++ * to V.34 phase 3 when doing PTT testing.
++ *
++ * Revision 1.71 1997/08/06 03:41:45 yura
++ * Added a few includes and defines needed by Win 95 driver.
++ *
++ * Revision 1.70 1997/08/05 03:22:10 liang
++ * Add equalizer center tap adjustment calculation related constants.
++ *
++ * Revision 1.69 1997/07/29 02:44:19 mwg
++ * Added new field to dataPumpCapabilities structure. This field is not
++ * yet exposed to external interface and currently is only used to
++ * enable PTT testing.
++ * Added new commands: kStartDataModemPTTTestCmd & kStartDataModemLoopbackTestCmd
++ *
++ * Revision 1.68 1997/07/22 22:05:10 liang
++ * Change sample rate setup as a normal command.
++ *
++ * Revision 1.67 1997/07/21 23:23:30 liang
++ * Define SoftModemSetSampleRate as null when SAMPLE_RATE_CONVERSION is not defined.
++ *
++ * Revision 1.66 1997/07/21 22:38:36 liang
++ * Change sample rate converter structure so that sample rate can be changed
++ * on the fly (at very begining) to either 8KHz or 9600Hz.
++ *
++ * Revision 1.65 1997/07/21 20:22:01 mwg
++ * Added statusInfoData to the log identifiers.
++ *
++ * Revision 1.64 1997/07/16 20:40:07 scott
++ * Added multitone monitor fields
++ *
++ * Revision 1.63 1997/07/10 02:31:08 mwg
++ * 1. Added kRxFrameHDLCFlags detected status for the
++ * framingInfo.
++ * 2. Added kLapmMNPFrameDetected status to lapmStatusCode.
++ * 3. Increased the number of AT registers to 35
++ * 4. Modified LinkLayerSpec structure in modemCommandStruc
++ * to provide the initial values of rxDataRate &
++ * txDataRate and RT delay for the cases when
++ * link layer is started *after* the data connection
++ * is established and the status snooper is unable
++ * to determine the rates and RT delay.
++ * 5. Added a few extra *empty* constant definitions for
++ * disabled features.
++ *
++ * Revision 1.62 1997/07/02 19:15:05 scott
++ * Added bits for Bel103 & Bel212 modulations.
++ *
++ * Revision 1.61 1997/07/02 05:15:16 mwg
++ * Added MNP code.
++ *
++ * Revision 1.60 1997/07/01 23:52:48 mwg
++ * Modified the record test setup to log and use all the commands.
++ *
++ * Revision 1.59 1997/06/25 19:11:26 mwg
++ * 1. Added new framingInfoCode values for Async framing error reporting;
++ * 2. Added a substructure to pass serial data format for kSetDTERate cmd;
++ *
++ * Revision 1.58 1997/05/28 02:05:08 liang
++ * Add PCM modem phase 2 codes.
++ *
++ * Revision 1.57 1997/05/12 21:55:08 liang
++ * Add call waiting tone detector module.
++ *
++ * Revision 1.56 1997/03/21 23:50:08 liang
++ * Added initial version of V8bis module to CVS tree.
++ *
++ * Revision 1.55 1997/03/19 18:35:05 mwg
++ * Changed copyright notice.
++ *
++ * Revision 1.54 1997/03/11 11:11:45 mwg
++ * Added code to report V42bis statistics.
++ *
++ * Revision 1.53 1997/03/04 06:21:08 mwg
++ * Added logging of most commands.
++ *
++ * Revision 1.52 1997/02/28 23:45:13 liang
++ * Added training progress status report kPhaseJitterDeactivated.
++ *
++ * Revision 1.51 1997/02/28 22:23:22 mwg
++ * Implemented the following features:
++ * - Cleardown for fax modulations V.27, V.29 V.17
++ * - Rockwell compatible bitmap report (needed by a customer)
++ *
++ * Revision 1.50 1997/02/28 03:05:31 mwg
++ * Added more logging data types.
++ *
++ * Revision 1.49 1997/02/27 05:28:58 mwg
++ * Added RxFrameOK report.
++ *
++ * Revision 1.48 1997/02/27 01:48:53 liang
++ * Add kV8MenuDataWord1 and kV8MenuDataWord2 connectionInfo status.
++ *
++ * Revision 1.47 1997/02/24 02:30:27 mwg
++ * Added new log data: predictorErrData
++ *
++ * Revision 1.46 1997/02/22 03:00:22 liang
++ * Add echoCancelledSignalData.
++ *
++ * Revision 1.45 1997/02/21 01:26:42 liang
++ * Add six more bits for the Demodulator capabilities to deal with 2nd order
++ * time tracking & PLLs, as well as shorter NEEC & PFEEC, and front end HBF.
++ *
++ * Revision 1.44 1997/02/17 03:09:00 mwg
++ * Added LAPM statistics printout.
++ *
++ * Revision 1.43 1997/02/04 08:38:47 mwg
++ * Added dc cancelled samples printout.
++ *
++ * Revision 1.42 1997/01/29 21:40:28 mwg
++ * Changed the way timers work: now time is passed as Q4 ms instead of ticks.
++ * Completed the 8KHz front end implementation.
++ * Got rid of kSamplesPerSecond constant.
++ *
++ * Revision 1.41 1997/01/24 07:13:50 mwg
++ * Added new statuses for automoder.
++ *
++ * Revision 1.40 1997/01/23 02:03:08 mwg
++ * Replaced old sample rate conversion with the newer one.
++ * Still has to resolve the automoding issue.
++ *
++ * Revision 1.39 1997/01/21 00:55:04 mwg
++ * Added 8KHz front end functionality.
++ *
++ * Revision 1.38 1996/11/13 00:30:55 liang
++ * Add kAutoLoadReductionEnabled to demodCapabilities so that PFEEC, FEEC, IEEC
++ * can be disabled automatically, but for worst processor loading test they
++ * won't be disabled when this bit is not set.
++ *
++ * Revision 1.37 1996/11/07 23:07:18 mwg
++ * Rearranged global variables to allow V.17 short training.
++ *
++ * Revision 1.36 1996/09/17 23:55:05 liang
++ * Change kMaxDataBlockSize from 16 to 24 to handle high data rates.
++ *
++ * Revision 1.35 1996/09/05 19:43:39 liang
++ * Removed caller ID error status code kCallerIDUnknownMessageType, and
++ * added caller ID status codes kCallerIDUnknownMessage & kCallerIDWholeMessage.
++ * Changed the callerIDStatus report structure.
++ *
++ * Revision 1.34 1996/08/29 00:36:57 liang
++ * Added kLapmTxFrameStatus and kLapmRxFrameStatus.
++ *
++ * Revision 1.33 1996/08/27 22:56:01 liang
++ * Added kResetHardware status code.
++ *
++ * Revision 1.32 1996/08/23 23:35:35 liang
++ * Add kATDebugStatus and function SoftModemGetHybridDelay.
++ *
++ * Revision 1.31 1996/08/22 01:13:19 yg
++ * Added AT command processor.
++ *
++ * Revision 1.30 1996/08/12 21:46:47 mwg
++ * Added code to report capabilities.
++ *
++ * Revision 1.29 1996/08/10 01:59:59 mwg
++ * Added report of the sent rate sequence;
++ *
++ * Revision 1.28 1996/08/07 22:15:02 mwg
++ * Added new status reports:
++ * kRemoteFreqOffset
++ * kIEECDeactivated
++ * kPFEECDeactivated
++ *
++ * Revision 1.27 1996/06/27 05:15:48 mwg
++ * Added V.24 circuit status.
++ *
++ * Revision 1.26 1996/06/27 02:12:43 mwg
++ * Cleaned the code.
++ *
++ * Revision 1.25 1996/06/20 23:57:30 mwg
++ * Added new training progress status.
++ *
++ * Revision 1.24 1996/06/18 21:13:50 mwg
++ * Added trellis MSE data logging.
++ *
++ * Revision 1.23 1996/06/12 02:31:10 mwg
++ * Added new type: VeryLong
++ *
++ * Revision 1.22 1996/06/08 22:15:39 mwg
++ * Added new status report: kCleardownStarted
++ * Added new field for the features: kV34bisEnabled
++ *
++ * Revision 1.21 1996/05/31 00:29:11 liang
++ * Add feature bit kV34ExtraINFOPreamble.
++ *
++ * Revision 1.20 1996/05/30 23:28:31 mwg
++ * Replaced enums with #defines
++ *
++ * Revision 1.19 1996/05/25 00:38:27 mwg
++ * Added kProjectedDataRate training progress report.
++ *
++ * Revision 1.18 1996/05/24 23:27:15 mwg
++ * Added mode status codes.
++ *
++ * Revision 1.17 1996/05/10 05:39:59 liang
++ * Move the includes for DEBUG inside "ifndef SoftModemTypes" so that
++ * cap build won't break.
++ *
++ * Revision 1.16 1996/05/08 01:49:34 mwg
++ * Added capability to setup auxiliary data channel handlers.
++ *
++ * Revision 1.15 1996/05/07 22:51:08 liang
++ * Added group delay estimation and improved symbol rate selection process.
++ *
++ * Revision 1.14 1996/05/06 06:49:09 mwg
++ * Fixed linux problems.
++ *
++ * Revision 1.13 1996/05/02 08:40:16 mwg
++ * Merged in Chromatic bug fixes.
++ *
++ * Revision 1.12 1996/05/02 02:26:21 mwg
++ * Added code to implement dozing functionality for v.34.
++ *
++ * Revision 1.11 1996/05/01 22:43:13 mwg
++ * Added new command: kDozeCmd;
++ *
++ * Revision 1.10 1996/05/01 19:20:16 liang
++ * Add command codes kInitiateRetrainCmd and kInitiateRateRenegotiationCmd.
++ *
++ * Revision 1.9 1996/04/25 01:12:37 mwg
++ * Added new flag: rapid preliminary EC training.
++ *
++ * Revision 1.8 1996/04/20 02:26:22 mwg
++ * Added preliminary far-end echo support
++ *
++ * Revision 1.7 1996/04/15 23:26:16 mwg
++ * Changed flag definitions for v34 modem.
++ *
++ * Revision 1.6 1996/04/04 02:35:50 liang
++ * Change kCid from 0x0080 to 0x0004 (0x0080 is defined as kV32).
++ *
++ * Revision 1.5 1996/03/08 23:07:01 mwg
++ * Added name for the struct.
++ *
++ * Revision 1.4 1996/03/02 00:59:27 liang
++ * Added typedef for V34CodingParameters structure.
++ *
++ * Revision 1.3 1996/02/27 02:28:31 mwg
++ * Fixed a bug in kLapmLongADPEnabled definition.
++ *
++ * Revision 1.2 1996/02/19 23:50:59 liang
++ * Removed compressionSetup parameter from the link layer command structure.
++ *
++ * Revision 1.1.1.1 1996/02/14 02:35:13 mwg
++ * Redesigned the project directory structure. Merged V.34 into the project.
++ *
++ * Revision 1.5 1996/01/15 23:26:04 liang
++ * Change the softmodem command structure name from SoftwareModemCommand
++ * to SoftwareModemCommandParameters.
++ *
++ *****************************************************************************/
++#ifndef SoftModemPh
++#define SoftModemPh
++
++/****************************************************************************/
++/* 1. Type definitions. */
++/* */
++/* 1.1 General types */
++/****************************************************************************/
++
++#ifndef SM_DECL
++#define SM_DECL
++#endif
++
++#ifdef __VxWORKS__
++#include <types/vxTypesOld.h>
++#endif
++
++#ifdef DEBUG
++/* We have to define __wchar_t for Linux */
++#if defined __linux__ && !defined _NO_WHCAR_DEF_
++typedef long int __wchar_t;
++#endif
++#if !defined(__KERNEL__) && !defined(_CFE_)
++#include <stdio.h>
++#include <stdlib.h>
++#endif
++
++#if defined(__linux__) || defined (__unix__) || defined (__unix) || (defined (__mips__) && !defined(_CFE_) && !defined(VXWORKS) && !defined(TARG_OS_RTEMS))/* enable if necessary, but not for dos-based builds */
++#include <linux/types.h>
++#endif
++
++
++#endif /* DEBUG */
++
++#if defined(W95_DRIVER)
++#pragma code_seg("_LTEXT", "LCODE")
++#pragma data_seg("_LDATA", "LCODE")
++#pragma const_seg("_LDATA", "LCODE")
++#pragma bss_seg("_LDATA", "LCODE")
++#pragma pack(1)
++#endif /* W95_DRIVER */
++
++#ifndef SoftModemTypes
++#include "SoftModemTypes.h"
++#endif /* SoftModemTypes */
++
++
++typedef struct
++ {
++ schar x, y;
++ } ComplexByte;
++
++typedef struct
++ {
++ uchar numerator;
++ uchar denominator;
++ } Ratio;
++
++#ifdef PEGASUS
++typedef union
++ {
++ struct
++ {
++ short x, y;
++ };
++
++ long foo;
++ } ComplexShort;
++#else
++typedef struct
++ {
++ short x, y;
++#ifdef GREENHILL
++ long a[0];
++#endif
++ } ComplexShort;
++#endif
++
++typedef struct
++ {
++ long x, y;
++ } ComplexLong;
++
++typedef struct
++ {
++ ushort x0, x1, x2;
++ short x3;
++ } VeryLong;
++
++typedef union
++ {
++ struct
++ {
++ uchar number;
++ uchar defaultValue; /* default value */
++ uchar maxValue; /* max allowed value */
++ uchar minValue; /* should be greater then maxValue to make reg readonly */
++ } param;
++ long alignment;
++ } SRegisterDefinition;
++
++#define MacroPaste2(a,b) a##b
++#define MacroPaste(a,b) MacroPaste2(a,b)
++#define ALWAYS_LONG_ALIGN() long MacroPaste(ALIGNMENT,__LINE__);
++
++#ifdef USE_LONG_ALIGN
++#define LONG_ALIGN() ALWAYS_LONG_ALIGN()
++#else
++#define LONG_ALIGN()
++#endif
++
++typedef ulong bitMap;
++
++typedef int pace;
++#define kStop 0
++#define kVerySlow 1
++#define kSlow 2
++#define kMedium 3
++#define kFast 4
++
++
++/****************************************************************************/
++/* 1. Type definitions. */
++/* */
++/* 1.2 Modem specific types */
++/****************************************************************************/
++
++typedef long directionType;
++#define kXmt 0
++#define kRcv 1
++#define kXmtRcv 2
++
++
++#define originating kXmt
++#define answering kRcv
++#define kOrg kXmt
++#define kAns kRcv
++#define kOrgAns kXmtRcv
++
++#define ORIGINATING originating
++#define ANSWERING answering
++
++typedef int pcmCodingType;
++#define kMuLawPCM 0
++#define kALawPCM 1
++
++#define kMuLawPCMScaleShift 2
++#define kALawPCMScaleShift 3
++
++/* link layer and framer share defines */
++typedef bitMap framerType;
++typedef bitMap linkLayerType;
++#define kNoFramer 0
++#define kSync 0x00000001
++#define kAsync 0x00000002
++#define kHDLC 0x00000004
++#define kLapm 0x00000008
++#define kMnp 0x00000010
++#define kV70 0x00000020
++#define kSAM 0x00000040
++
++
++typedef bitMap modulationMap;
++typedef bitMap symbolRateMap;
++typedef bitMap dataRateMap;
++typedef bitMap featureMap;
++typedef bitMap breakType;
++
++typedef bitMap audioType;
++#define kRawAudio 0
++#define kAudioG729A 1
++#define kAudioG729 2
++#define kAudioG723 3
++
++
++#ifndef ADSL_MODEM
++typedef long modemStatusCode;
++#endif
++ /* Information status Codes: 1-31 */
++#define kSetSampleRate 1
++#define kModulationKnown 2
++#define kRxSymbolRate 3
++#define kTxSymbolRate 4
++#define kRxCarrierFreq 5
++#define kTxCarrierFreq 6
++#define kTxPreemphasisFilter 7
++#define kTxPowerAdjustment 8
++#define kRemoteTxPreemphasisFilter 9
++#define kRemoteTxPowerAdjustment 10
++#define kRxRateKnown 11
++#define kTxRateKnown 12
++#define kRxDataModeActive 13
++#define kTxDataModeActive 14
++#define kTxSignalCompleted 15
++#define kDTMFSignalDetected 16
++#define kModemSignalDetected 17
++#define kCallProgressSignalDetected 18
++#define kCustomSignalDetected 19
++#define kFaxPreambleDetected 20
++#define kV24CircuitStatusChange 21
++#define kHookStateChange 22
++#define kCallWaitingToneDetected 23
++#define kMultiToneSignalDetected 24
++#define kPulseShuntStateChange 25
++#define kRingFrequency 26
++
++
++ /* Warning status Codes: 32-64 */
++#define kError 32
++#define kV34Exception 33
++#define kClearDownLocal 34
++#define kClearDownRemote 35
++#define kCarrierPresent 36
++#define kCarrierLost 37
++#define kRetrainingLocal 38
++#define kRetrainingRemote 39
++#define kRateRenegotiationLocal 40
++#define kRateRenegotiationRemote 41
++#define kFallbackStarted 42
++#define kFallForwardStarted 43
++#define kCleardownStarted 44
++#define kIllegalCommand 45
++
++ /* Auxiliary status Codes: 64-.. */
++#define kTrainingProgress 64
++#define kConnectionInfo 65
++#define kDialerStatus 66
++#define kFramingInfo 67
++#define kBreakReceived 68
++#define kLapmStatus 69
++#define kLapmParameter 70
++#define kV42bisStatus 71
++#define kCallerIDStatus 72
++#define kIOStatus 73
++#define kCapabilitiesStatus 74
++#define kSpeakerStatus 75
++#define kATProfileChanged 76
++#define kATDebugStatus 77
++#define kResetHardware 78
++#define kV8bisStatus 79
++#define kMnpStatus 80
++#define kMnpParameter 81
++#define kV70Status 82
++#define kV70Parameter 83
++#define kFaxClass2Status 84
++#define kAudioStatus 85
++#define kAudioParameter 86
++#define kOverlayStatus 87
++#define kCallerIDCircuitStatus 88
++#define kV80Status 89
++#define kV80Parameter 90
++#define kLocalCountryChanged 91
++#define kDTERateChanged 92
++#define kATResponse 93
++#define kFramerConfigured 94
++#define kA8RStatus 95
++#define kA8TStatus 96
++#define kVersionStatus 97
++
++ /* Testing status codes: 128-... */
++ /* These statuses are generated by modem test suit */
++#define kTestFinished 128
++#define kConnectivityTestFinished 129
++#define kTestCheckSum 130
++#define kLogFileControl 131
++#define kTestAtmVcFinished 132
++#define kTestClearEocFinished 133
++#define kTestG997Finished 134
++
++typedef long modemErrorCode;
++#define kNoError 0
++#define kErrorTimerExpired 1
++#define kErrorNoSReceived 2
++#define kErrorNoSbarReceived 3
++
++
++typedef long dialerStatusCode;
++#define kDialCompleted 0
++#define kNoDialToneDetected 1
++#define kBongToneDetected 2
++#define kNoBongToneDetected 3
++#define kErrorIllegalDialModifier 5
++#define kDialStarted 6
++#define kExternalPulseDialDigit 7
++
++
++typedef long framingInfoCode;
++#define kRxFrameOK 0
++#define kRxFrameTooLong 1
++#define kRxFrameCRCError 2
++#define kTxFrameUnderrun 3
++#define kRxFrameOverrun 4
++#define kRxFrameAborted 5
++#define kRxFrameParityError 6
++#define kRxFrameFormatError 7
++#define kRxFrameHDLCFlagsDetected 8
++
++
++typedef long IOStatusCode;
++#define kRxDataReady 0
++#define kRxBufferOverflow 1
++#define kTxSpaceAvailable 2
++#define kTxBufferEmpty 3
++
++typedef long capabilitiesStatusCode;
++#define kSymbolRates 0
++#define kDataRates 1
++#define kFeatures 2
++#define kDemodCapabilities 3
++#define kRateThresholdAdjustment 4
++#define kXmtLevel 5
++#define kHybridDelay 6
++#define kAuxFeatures 7
++
++
++typedef long A8TStatusCode;
++#define kA8TFinished 0
++
++typedef long callerIDStatusCode;
++#define kCallerIDError 0
++#define kCallerIDChannelSeizureReceived 1
++#define kCallerIDMarkSignalReceived 2
++#define kCallerIDTime 3
++#define kCallerIDTelnum 4
++#define kCallerIDName 5
++#define kCallerIDEnd 6
++#define kCallerIDUnknownMessage 7
++#define kCallerIDWholeMessage 8
++
++
++typedef long callerIDErrorCode;
++#define kCallerIDNoError 0
++#define kCallerIDMarkSignalError 1
++#define kCallerIDTooManyMarkBits 2
++#define kCallerIDMessageTooLong 3
++#define kCallerIDChecksumError 4
++
++
++typedef long connectionInfoCode;
++#define kRTDelay 1
++#define kRxSignalLevel 2
++#define kTimingOffset 3
++#define kFreqOffset 4
++#define kPhaseJitter 5
++#define kSNR 6
++#define kNearEchoLevel 7
++#define kSER 8
++#define kNearEndDelay 9
++#define kFarEchoLevel 10
++#define kL1L2SNRDifference 11
++#define kDCOffset 12
++#define kTotalRxPower 13
++#define kRemoteFreqOffset 14
++/* obsolete #define kV8MenuDataWord1 15 */
++/* obsolete #define kV8MenuDataWord2 16 */
++#define kPCMP2AnalogDetSNR 17
++#define kPCMP2DigitalDetSNR 18
++#define kPCMP2RBSDetSNR 19
++#define kEqCenterTapOffset 20
++#define kPCMPadValue 21
++#define kPCMRBSMap 22
++#define kPCMCodingType 23
++#define kPCMSpectralShapingBits 24
++#define kLoopbackSelfTestResult 25
++#define kEyeQuality 26
++#define kLoopbackSelfTestNewErrs 27
++#define kV34EqlLengthStatus 28
++#define kV34EqlOffsetStatus 29
++#define kV8CallMenuData 30
++#define kV8JointMenuData 31
++#define kPCMClientIeecLengthStatus 32
++#define kPCMClientIeecOffsetStatus 33
++#define kSeamlessRateChange 34
++
++typedef long trainingProgressCode;
++#define kPeriodicalSignalDetected 0
++#define kPhaseReversalDetected 1
++#define kSignalStartDetected 2
++#define kSignalEndDetected 3
++#define kSSignalDetected 4
++#define kSbarSignalDetected 5
++#define kJ4SignalDetected 6
++#define kJ16SignalDetected 7
++#define kJprimeSignalDetected 8
++#define kMPSignalDetected 9
++#define kMPprimeSignalDetected 10
++#define kMPSignalSent 11
++#define kMPprimeSignalSent 12
++#define kRateSignalDetected 13
++#define kESignalDetected 14
++#define kRateSignalSent 15
++
++#define kAutomodingTryModulation 16
++#define kAutomodingCompleted 17
++#define kRCFaxBitMapStatus 18
++
++#define kV8CIDetected 19
++#define kV8ANSToneDetected 20
++#define kV8ANSamDetected 21
++#define kV8CMDetected 22
++#define kV8JMDetected 23
++#define kV8CJDetected 24
++#define kV8Finished 25
++
++#define kV34Phase2Started 26
++#define kV34Phase2INFOSequenceDetected 27
++#define kV34Phase2NearEndEchoDetected 28
++#define kV34Phase2L1Receiving 29
++#define kV34Phase2L2Receiving 30
++#define kV34Phase2Finished 31
++#define kV34Phase3Started 32
++#define kV34Phase3Finished 33
++#define kV34Phase4Started 34
++#define kV34Phase4Finished 35
++#define kV34DecoderParameters 36
++#define kV34EncoderParameters 37
++
++#define kMaxLocalRxDataRate 38
++#define kMaxLocalTxDataRate 39
++#define kMaxRemoteRxDataRate 40
++#define kMaxRemoteTxDataRate 41
++#define kProjectedDataRate 42
++#define kFEECDeactivated 43
++#define kIEECDeactivated 44
++#define kPFEECDeactivated 45
++#define kPhaseJitterDeactivated 46
++
++#define kPCMP2DetectedDigitalConnection 47
++#define kPCMP2DetectedRBS 48
++#define kX2DetectedPhase1Escape 49
++
++#define kStarted1200BpsTraining 50
++#define kStarted2400BpsTraining 51
++#define kUnscrambledOneDetected 52
++#define kScrambled1200BpsOneDetected 53
++#define kScrambled2400BpsOneDetected 54
++#define kV22BisS1Detected 55
++#define kV22InitiateLoop2Test 56
++#define kV22RespondLoop2Test 57
++#define kV22Loop2TestAlt01Detected 58
++
++#define kDataModemLoop1TestStarted 59
++#define kDataModemLoop1TestFinished 60
++#define kDataModemLoop2TestStarted 61
++#define kDataModemLoop2TestFinished 62
++#define kDataModemLoop3TestStarted 63
++#define kDataModemLoop3TestFinished 64
++#define kDataModemSelfLoopTestEnabled 65
++
++#define kPCMPhase3Started 70
++#define kPCMPhase3Finished 71
++#define kPCMPhase4Started 72
++#define kPCMPhase4Finished 73
++
++#define kV90JaSignalDetected 74
++#define kV90JdSignalDetected 75
++#define kV90JdPrimeSignalDetected 76
++#define kV90RSignalDetected 77
++#define kV90RBarSignalDetected 78
++#define kV90CPSignalDetected 79
++
++#define kV90CPtSignalSent 80
++#define kV90CPSignalSent 81
++#define kV90CPprimeSignalSent 82
++
++
++#define kV34SeamlessRateChangeRequestSent 83
++#define kV34SeamlessRateChangeUpdateSent 84
++#define kV34SeamlessRateChangeRequestReceived 85
++#define kV34SeamlessRateChangeUpdateReceived 86
++#define kV34SeamlessRateChangeUpdateTimeout 87
++
++#define kV90JaSignalAcknowledged 88
++
++#define kV34HCtrlChanPPhDetected 100
++#define kV34HCtrlChanMPhDetected 101
++#define kV34HCtrlChanRatesKnown 102
++#define kV34HDXCtrlChanBinary1Detected 103
++#define kV34HDXPhase3Started 104
++#define kV34HDXPhase3Finished 105
++#define kV34HDXPrimChanBinary1Detected 106
++#define kFlexEventTRN2AFinished 107
++
++#define kV32RanginigStarted 108
++#define kV32RangingStarted 108
++#define kV32RanginigFinished 109
++#define kV32RangingFinished 109
++
++
++typedef long lapmStatusCode;
++#define kLapmDisconnected 0 /* LAPM disconnected */
++#define kLapmConnected 1 /* LAPM is connected */
++#define kLapmV42ODPDetected 2 /* LAPM ODP is detected */
++#define kLapmV42ADPDetected 3 /* LAPM V.42 ADP is detected */
++#define kLapmUnknownADPDetected 4 /* LAPM Unsupported ADP is detected */
++#define kLapmTimeout 5 /* LAPM Timeout */
++#define kLapmMNPFrameDetected 6 /* LAPM detected MNP frame */
++#define kLapmDPDetectionTimedOut 7 /* LAPM Unsupported ADP is detected */
++#define kLapmError 8 /* LAPM Error */
++#define kLapmTestResult 9 /* LAPM loopback test result */
++#define kLapmTxFrameStatus 10
++#define kLapmRxFrameStatus 11
++#define kLapmTxStatistics 12
++#define kLapmRxStatistics 13
++
++typedef long lapmTakedownReason;
++#define kLapmRemoteDisconnect 0
++#define kLapmLocalDisconnect 1
++#define kLapmCannotConnect 2
++#define kLapmProtocolError 3
++#define kLapmCompressionError 4
++#define kLapmInactivityTimer 5
++#define kLapmRetryFailed 6
++
++
++typedef long lapmParameterCode;
++#define kLapmXmtK 0
++#define kLapmRcvK 1
++#define kLapmXmtN401 2
++#define kLapmRcvN401 3
++#define kLapmTESTSupport 4
++#define kLapmSREJSupport 5
++#define kLapmCompDir 6
++#define kLapmCompDictSize 7
++#define kLapmCompStringSize 8
++
++
++typedef long lapmErrorCode;
++#define kLapmNoError 0
++#define kLapmBufferOverflow 1
++#define kLapmFrameTooLong 2
++#define kLapmBadFrame 3
++#define kLapmUnknownEvent 4
++/* 6 is reserved for kLapmRetryFailed defined above */
++
++
++typedef long lapmTestResultCode;
++#define kLapmTestPassed 0
++#define kLapmTestRequestIgnored 1
++#define kLapmTestAlreadyInProgress 2
++#define kLapmTestNotSupported 3
++#define kLapmTestFailed 4
++
++
++typedef long v42bisStatusCode;
++#define kV42bisEncoderTransparentMode 0 /* V.42bis encoder transparent mode active */
++#define kV42bisEncoderCompressedMode 1 /* V.42bis encoder compressed mode active */
++#define kV42bisDecoderTransparentMode 2 /* V.42bis decoder transparent mode active */
++#define kV42bisDecoderCompressedMode 3 /* V.42bis decoder compressed mode active */
++#define kV42bisError 4 /* V.42bis error */
++#define kV42bisEncoderStatistics 5
++#define kV42bisDecoderStatistics 6
++
++
++typedef long v42bisErrorCode;
++#define kV42bisUndefinedEscSequence 0 /* V.42bis undefined escape sequence */
++#define kV42bisCodewordSizeOverflow 1 /* V.42bis codeword size overflow */
++#define kV42bisUndefinedCodeword 2 /* V.42bis undefined codeword */
++
++typedef long mnpStatusCode;
++#define kMnpDisconnected 0 /* Mnp disconnected */
++#define kMnpConnected 1 /* Mnp is connected */
++#define kMnpFallback 2 /* Mnp is falling back to buffer mode */
++#define kMnpError 3 /* Mnp Error */
++#define kMnpTimeout 4 /* Mnp Timeout */
++#define kMnpInvalidLT 5 /* Invalid LT received */
++#define kMnpRetransmitFrame 6
++#define kMnpNack 7
++#define kMnpTxFrameStatus 8
++#define kMnpRxFrameStatus 9
++#define kMnpTxStatistics 10
++#define kMnpRxStatistics 11
++
++typedef long mnpTakedownReason;
++#define kMnpRemoteDisconnect 0
++#define kMnpLocalDisconnect 1
++#define kMnpCannotConnect 2
++#define kMnpProtocolError 3
++#define kMnpCompressionError 4
++#define kMnpInactivityTimer 5
++#define kMnpRetryFailed 6
++
++
++typedef long mnpParameterCode;
++#define kMnpProtocolLevel 0
++#define kMnpServiceClass 1
++#define kMnpOptimizationSupport 2
++#define kMnpCompressionSupport 3
++#define kMnpN401 4
++#define kMnpK 5
++
++
++typedef long mnpErrorCode;
++#define kMnpNoError 0
++#define kMnpBufferOverflow 1
++#define kMnpFrameTooLong 2
++#define kMnpBadFrame 3
++#define kMnpUnknownEvent 4
++
++
++typedef long v70StatusCode;
++#define kV70Disconnected 0 /* V70 disconnected */
++#define kV70Connected 1 /* V70 is connected */
++#define kV70Error 2 /* V70 Error */
++#define kV70Timeout 3 /* V70 Timeout */
++#define kV70ChannelDown 4 /* V70 channel released */
++#define kV70ChannelUp 5 /* V70 channel established */
++#define kV70AudioChannelDown 6 /* V70 audio channel released */
++#define kV70AudioChannelUp 7 /* V70 audio channel established */
++#define kV70DataChannelDown 8 /* V70 data channel released */
++#define kV70DataChannelUp 9 /* V70 data channel established */
++#define kV70OOBChannelDown 10 /* V70 out-of-band channel released */
++#define kV70OOBChannelUp 11 /* V70 out-of-band channel established */
++#define kV70TxFrameStatus 12
++#define kV70RxFrameStatus 13
++#define kV70TxStatistics 14
++#define kV70RxStatistics 15
++#define kV70StateTransition 16
++
++typedef long v70TakedownReason;
++#define kV70RemoteDisconnect 0
++#define kV70LocalDisconnect 1
++#define kV70CannotConnect 2
++#define kV70ProtocolError 3
++#define kV70CompressionError 4
++#define kV70InactivityTimer 5
++#define kV70RetryFailed 6
++
++
++typedef long v70ParameterCode;
++#define kV70SuspendResume 0
++#define kV70CrcLength 1
++#define kV70NumberOfDLCs 2
++#define kV70uIH 3
++
++#define kV70LapmXmtK 10
++#define kV70LapmRcvK 11
++#define kV70LapmXmtN401 12
++#define kV70LapmRcvN401 13
++#define kV70LapmTESTSupport 14
++#define kV70LapmSREJSupport 15
++#define kV70LapmCompDir 16
++#define kV70LapmCompDictSize 17
++#define kV70LapmCompStringSize 18
++
++#define kV70AudioHeader 20 /* if audio header is present in audio frames */
++#define kV70BlockingFactor 21 /* audio blocking factor (default 1) */
++#define kV70SilenceSuppression 22 /* audio silence suppression */
++
++
++
++typedef long v70ErrorCode;
++#define kV70NoError 0
++#define kV70BadFrame 1
++
++typedef long audioStatusCode;
++#define kAudioFramesLost 0 /* One or more audio frames were lost */
++#define kAudioTxBufferOverflow 1
++#define kAudioRxBufferOverflow 2
++#define kAudioRxBufferUnderflow 3
++
++
++typedef long v80StatusCode;
++#define kV80Disconnected 0 /* V80 disconnected */
++#define kV80Connected 1 /* V80 is connected */
++#define kV80Error 2 /* V80 Error */
++#define kV80InBandStatus 3 /* V80 in-band SAM status */
++#define kV80TxFrameStatus 12
++#define kV80RxFrameStatus 13
++#define kV80TxStatistics 14
++#define kV80RxStatistics 15
++
++typedef long v80TakedownReason;
++#define kV80RemoteDisconnect 0
++#define kV80LocalDisconnect 1
++
++typedef long v80ErrorCode;
++#define kV80NoError 0
++#define kV80BadFrame 1
++
++typedef long overlayStatusCode;
++#define kOverlayBegin 0 /* DSP has halted */
++#define kOverlayEnd 1 /* DSP has received entire overlay */
++#define kOverlayElapsedTime 2 /* time elapsed(as viewed by datapump) during overlay */
++#define kOverlayRecordingData 3 /* ms of data that we are recording */
++#define kOverlayReplayingData 4 /* ms of data that we have replayed so far */
++#define kOverlayReplayDone 5 /* playback is done */
++
++/* types for kOverlayRecording/ReplayingData */
++#define kOverlayTxData 0
++#define kOverlayRxData 1
++
++/*
++ * Rockwell faxmodem compatible bitmap (kRCFaxBitMapStatus)
++ */
++#define kRCFaxFCD 0x01
++#define kRCFaxP2 0x02
++#define kRCFaxPN 0x04
++#define kRCFaxDCD 0x08
++#define kRCFaxTX 0x10
++#define kRCFaxCTS 0x20
++
++
++#ifndef ADSL_MODEM
++typedef long modemCommandCode;
++#endif
++ /* Basic Action commands 00-63 */
++#define kIdleCmd 0
++#define kStartFaxModemCmd 1
++#define kStartDataModemCmd 2
++#define kStartCallProgressMonitorCmd 3
++#define kSendTonesCmd 4
++#define kStartCallerIDRcvCmd 5
++#define kSetLinkLayerCmd 6
++#define kSetFramerCmd 7
++#define kTestLinkLayerCmd 8
++#define kIdleRcvCmd 9
++#define kIdleXmtCmd 10
++#define kSetStatusHandlerCmd 11
++#define kSetEyeHandlerCmd 12
++#define kSetLogHandlerCmd 13
++#define kSendBreakCmd 14
++#define kSendTestCmd 15
++#define kDisconnectLinkCmd 16
++#define kSetXmtGainCmd 17
++#define kStartADSICmd 18
++#define kSetHybridDelayCmd 19
++#define kCleardownCmd 20
++#define kInitiateRetrainCmd 21
++#define kInitiateRateRenegotiationCmd 22
++#define kDialToneIndicator 23
++#define kSetRxDataHandler 24 /* not used yet */
++#define kSetTxDataHandler 25 /* not used yet */
++#define kSetAuxRxDataHandler 26
++#define kSetAuxTxDataHandler 27
++#define kRingIndicatorCmd 28
++#define kDTERateIndicatorCmd 29
++#define kStartV8bisCmd 30
++#define kSendMultiTonesCmd 31
++#define kSetMultiToneParamsCmd 32
++#define kSetModemSampleRateCmd 33
++#define kStartDataModemPTTTestCmd 34
++#define kStartDataModemLoopbackTestCmd 35
++#define kRingFrequencyCmd 36
++#define kSetCallWaitingDetectorStateCmd 37
++#define kV34HDXTurnOffCurrentModeCmd 38
++#define kSetAudioCmd 39
++#define kLoopbackTestAutoRespEnableCmd 40
++#define kSetCallProgressParamsCmd 41
++#define kSetTrainingDelayReductionCmd 42
++#define kSetFaxECMPageBufferPtrCmd 43
++#define kSetLineCurrentStateCmd 44
++#define kSetFramerParameterCmd 45
++#define kStartDozeCmd 46
++#define kEndDozeCmd 47
++#define kStartRingFrequencyDetectorCmd 48
++#define kSetBufferingDelayAdjustmentCmd 49
++
++ /* Composite action commands 64-127 */
++#define kDialCmd 64
++#define kSendCallingToneCmd 65
++#define kV24CircuitChangeCmd 66
++#define kStartATModeCmd 67
++#define kStopATModeCmd 68
++#define kSetATRegister 69
++#define kSetATRegisterLimits 70
++#define kSetATIResponse 71
++#define kEnableATDebugMode 72
++#define kSetWhiteListEntry 73
++#define kSetBlackListEntry 74
++
++#define kV70Setup 75 /* additional V70 configuration */
++#define kEstablishChannel 76 /* Establish new link layer channel (V70) */
++#define kReleaseChannel 77 /* Release link layer channel (V70) */
++#define kWaitChannelEstablished 78 /* Wait for establishment of the new link layer channel (V70) */
++
++/* unused 79 */
++#define kMnpOOBFrameCmd 80
++#define kV80InBandCmd 81 /* V80 In-band commands */
++#define kSetV250IdString 82
++#define kSetInternationalTablesCmd 83
++#define kConfigureCountryCmd 84
++#define kConigureCountryCmd 84
++#define kV8ControlCmd 85
++#define kV8bisSendMessage 86
++#define kSetHWIdCmd 87
++#define kSetCodecIdCmd 88
++#define kOverCurrentDetected 89
++
++
++
++typedef long v8ControlType;
++#define kEnableDTEControl 1
++#define kSetV8ControlTimeout 2
++#define kSetCIValue 3
++#define kSetCMValue 4
++#define kSetJMValue 5
++#define kSendCJ 6
++#define kSetCallFunctionCategory 7
++
++typedef long v250IdStringCode;
++#define kGMIString 1
++#define kGMMString 2
++#define kGMRString 3
++#define kGSNString 4
++#define kGOIString 5
++
++typedef long kCallProgressParameterCode;
++#define kModemSignalPowerThreshold 1
++#define kDialtonePowerThreshold 2
++#define kRingBackPowerThreshold 3
++#define kBusyPowerThreshold 4
++#define kReorderPowerThreshold 5
++#define k2ndDTnPowerThreshold 6
++#define kMinDialtoneTime 7
++#define kDialtoneFreqRange 8
++#define kRingBackFreqRange 9
++#define kBusyFreqRange 10
++#define kReorderFreqRange 11
++#define k2ndDTnFreqRange 12
++
++
++typedef long framerParameterCode;
++#define kSetHDLCLeadingFlags 0
++#define kHDLCResetFlagDetection 1
++#define kSyncFramerSetup 2
++#define kHDLCSendCRC 3
++#define kHDLCSendFlags 4
++#define kHDLCSendAborts 5
++
++
++typedef long logDataCode;
++#define eyeData 0
++#define mseData 1
++#define rxData 2
++#define txData 3
++#define neecData 4
++#define eqlData 5
++#define ieecData 6
++#define feecData 7
++#define eqlPllData 8
++#define feecPllData 9
++#define timingData 10
++#define pjPhaseErrData 11
++#define pjEstimateData 12
++#define pjEstDiffData 13
++#define pjCoefData 14
++#define inputSignalData 15
++#define outputSignalData 16
++#define agcGainData 17
++#define automoderData 18
++#define v8CMData 19
++#define v8JMData 20
++#define inputAfterNeecData 21
++#define eqlErrData 22
++#define dpskMicrobitsData 23
++#define v34P2LSamplesData 24
++#define phaseSplittedLData 25
++#define fftedLData 26
++#define channelSNRData 27
++#define noiseEstimateData 28
++#define signalEstimateData 29
++#define v34INFOData 30
++#define v34ChanProbData 31
++#define v34P2OutputData 32
++#define v8ANSamDetectData 33
++#define pFeecData 34
++#define channelDelayData 35
++#define timingOffsetData 36
++#define trellisMSEData 37
++#define interpolatedSignalData 38
++#define dcCancelledSignalData 39
++#define echoCancelledSignalData 40
++#define predictorErrData 41
++#define commandInfoData 42
++#define unusedInfoData 43
++#define atCommandInfoData 44
++#define atResponseInfoData 45
++#define hwTerminalTxData 46
++#define hwTerminalRxData 47
++#define statusInfoData 48
++#define channelResponseData 49
++#define channelImpulseRespData 50
++#define x2PcmP1DetectorInData 51
++#define x2PcmP1DetectorOutData 52
++#define eqlRealData 53
++#define ieecRealData 54
++#define neecOutputData 55
++#define precodedEqlOutputData 56
++#define eqlRealErrData 57
++#define idealEqlOutputData 58
++#define agcData 59
++#define pcmInfidelityData 60
++#define v42bisCycleCount 61
++#define pcmImdOffsetCoefData 62
++#define pcmImdOffsetData 63
++#define v90RcvdDilLongData 64
++#define v90RcvdDilShortData 65
++#define v90DilProducedData 66
++#define pcmEncoderKbitsData 67
++#define pcmEncoderMbitsData 68
++#define pcmEncoderSbitsData 69
++#define pcmDecoderKbitsData 70
++#define pcmDecoderMbitsData 71
++#define pcmDecoderSbitsData 72
++#define v90CPorCPtData 73
++#define mnpDecoderInputData 74
++#define mnpDecoderOutputData 75
++#define v42bisEncoderInputData 76
++#define v42bisDecoderInputData 77
++#define modulatorInputData 78
++#define modulatorOutputData 79
++#define encodedStatusData 80
++#define blockFramerTxData 81
++#define blockFramerRxData 82
++#define framerTxData 83
++#define framerRxData 84
++#define dpskBasebandData 85
++#define dpskBasebandLPFedData 86
++#define dpskRealData 87
++#define bandEdgeCorrectedSignalData 88
++#define atmLogData 89
++#define clearEocLogData 90
++#define g997LogData 91
++
++
++#define kLogDataDelimiter 0xFEFEFEFE
++
++/****************************************************************************/
++/* 1. Type definitions. */
++/* */
++/* 1.3 Handlers */
++/****************************************************************************/
++
++typedef void (SM_DECL *rcvHandlerType) (void *gDslVars, int, short*);
++typedef void (SM_DECL *xmtHandlerType) (void *gDslVars, int, short*);
++typedef int (SM_DECL *xmtHandlerWithRtnValType) (void *gDslVars, int, short*);
++typedef void (SM_DECL *timerHandlerType) (void *gDslVars, long);
++typedef int (SM_DECL *interpolatorHandlerType) (void *gDslVars, int, short*, short*);
++typedef void (SM_DECL *controlHandlerType) (void *gDslVars, int);
++
++typedef int (SM_DECL *txDataHandlerType) (void *gDslVars, int, uchar*);
++typedef int (SM_DECL *rxDataHandlerType) (void *gDslVars, int, uchar*);
++
++typedef bitMap (SM_DECL *signalDetectorType) (void *gDslVars, int, long, long*);
++
++
++typedef void (SM_DECL *hookHandlerType) (void *gDslVars, Boolean);
++
++typedef short* (SM_DECL *sampBuffPtrType) (void *gDslVars, int);
++
++typedef void (SM_DECL *eyeHandlerType) (void *gDslVars, int, ComplexShort*);
++typedef void (SM_DECL *logHandlerType) (void *gDslVars, logDataCode, ...);
++
++typedef void (SM_DECL *voidFuncType) (void *gDslVars);
++
++typedef int (SM_DECL *txAudioHandlerType) (void *gDslVars, int, short*);
++typedef int (SM_DECL *rxAudioHandlerType) (void *gDslVars, int, short*);
++
++
++/****************************************************************************/
++/* 1. Type definitions. */
++/* */
++/* 1.4 Structures */
++/****************************************************************************/
++
++/*
++ * AT command processor definitions
++ */
++#define kATRegistersNumber 56
++#define kFirstConfigurationRegister 500
++#define kLastConfigurationRegister 515
++#define kFirstInternationalRegister 516
++#define kLastInternationalRegister 595
++
++
++
++#define kATMaxDialStringSize 128
++typedef struct
++ {
++ struct
++ {
++ uchar loadNumber; /* Which profile to load upon powerup/reset */
++ uchar countryCode; /* T.35 Country Code */
++ uchar profile[2][kATRegistersNumber];
++ uchar dialString[4][kATMaxDialStringSize + 1];
++ } config;
++ ulong versionCode;
++ ulong crcCheckSum;
++ } NVRAMConfiguration;
++
++/* Structure to hold international settings */
++typedef struct
++ {
++ char *name;
++ int countryCode;
++ const SRegisterDefinition *userRegisters;
++ const ulong *configRegisters;
++ } CountryDescriptor;
++
++/*
++ * V.34 coding parameters structure
++ */
++
++typedef struct
++ {
++ /* DO NOT CHANGE THE ORDER OF FIELDS IN THIS STRUCTURE!
++ * (Some assembly code depends on it!) If you
++ * must add fields, please do so at the bottom.
++ */
++
++ int symbolRateIndex,
++ dataRateIndex,
++ userSNRAdjustment;
++ Boolean auxChannel,
++ expConstellation,
++ precoding,
++ nonlinearCoding;
++ schar J, /* number of data frames in superframe */
++ P, /* number of mapping frames in a data frame */
++ r, /* number of high mapping frames in a data frame */
++ b, /* number of data bits in a mapping frame */
++ W, /* number of aux bits in a data frame */
++ K, /* number of S bits in a mapping frame */
++ q, /* number of Q bits in a 2D symbol */
++ M; /* number of rings in shell mapping */
++ long nominalVariance; /* the signal variance which gives 1e-2 BLER Q10 */
++ int bitsPerDataFrame;
++ short quantRoundOff,
++ quantMask;
++ uchar nTrellisStates,
++ log2NTrellisStates;
++ short gain1xmt,
++ gain2xmt,
++ gain1rcv,
++ gain2rcv;
++ ushort bitInversionPattern;
++ } V34CodingParams;
++
++typedef long v8bisStatusCode;
++typedef bitMap v8bisConnectionSetup;
++#if defined(V8BIS) || defined(AT_COMMANDS_V8BIS)
++#include "V8bisMainTypes.h"
++#endif
++
++#define kMaxMultiTones 4 /* MultiTone: search for up to this many tones at once */
++
++#ifndef ADSL_MODEM
++typedef struct
++ {
++ modemStatusCode code;
++ union
++ {
++ long value;
++ long freq;
++ modemErrorCode error;
++ modulationMap modulation;
++ modulationMap modemSignal;
++ dataRateMap dataRate;
++ long dtmfSignal;
++ bitMap callProgressSignal;
++ bitMap customSignal;
++ void *ptr;
++ struct
++ {
++ long detected;
++ long numTones;
++ long tones[kMaxMultiTones];
++ } multiToneInfo;
++ struct
++ {
++ v8bisStatusCode code;
++ long value;
++ } v8bisStatus;
++ struct
++ {
++ trainingProgressCode code;
++ long value;
++ } trainingInfo;
++ struct
++ {
++ long code;
++ long value;
++ } v24Circuit;
++ struct
++ {
++ trainingProgressCode code;
++ void* ptr;
++ } advancedTrainingInfo;
++ struct
++ {
++ capabilitiesStatusCode code;
++ long value;
++ } capabilitiesStatusInfo;
++ struct
++ {
++ connectionInfoCode code;
++ long value;
++ } connectionInfo;
++ struct
++ {
++ connectionInfoCode code;
++ int length;
++ uchar *ptr;
++ } advancedConnectionInfo;
++ struct
++ {
++ dialerStatusCode code;
++ long value;
++ long makeTime;
++ long breakTime;
++ } dialerStatus;
++ struct
++ {
++ long enabled;
++ long volume;
++ } speakerStatus;
++ framingInfoCode framingInfo;
++ IOStatusCode ioStatus;
++ struct
++ {
++ lapmStatusCode code;
++ union
++ {
++ long value;
++ lapmTakedownReason reason;
++ lapmErrorCode error;
++ lapmTestResultCode testResult;
++ struct
++ {
++ long length;
++ uchar *framePtr;
++ } frame;
++ struct
++ {
++ long nFrames;
++ long nFrameErrors;
++ } statistic;
++ } param;
++ } lapmStatus;
++ struct
++ {
++ lapmParameterCode code;
++ long value;
++ } lapmParameter;
++ struct
++ {
++ v42bisStatusCode code;
++ union
++ {
++ long value;
++ v42bisErrorCode error;
++ struct
++ {
++ long nBytesIn;
++ long nBytesOut;
++ } statistic;
++ } param;
++ } v42bisStatus;
++ struct
++ {
++ mnpStatusCode code;
++ union
++ {
++ long value;
++ mnpTakedownReason reason;
++ mnpErrorCode error;
++ struct
++ {
++ long nFrames;
++ long nFrameErrors;
++ } statistic;
++ struct
++ {
++ ulong nSize;
++ uchar *Buffer;
++ } fallback;
++ struct
++ {
++ char *header;
++ void *frame;
++ } frame;
++ struct
++ {
++ long nack;
++ long rFrameNo;
++ } timeout;
++ struct
++ {
++ long frameNo;
++ long framesPending;
++ } retrFrame;
++ } param;
++ } mnpStatus;
++ struct
++ {
++ mnpParameterCode code;
++ long value;
++ } mnpParameter;
++ struct
++ {
++ v70StatusCode code;
++ union
++ {
++ long value;
++ v70TakedownReason reason;
++ v70ErrorCode error;
++ struct
++ {
++ long nFrames;
++ long nFrameErrors;
++ } statistic;
++ struct
++ {
++ long length;
++ uchar *framePtr;
++ } frame;
++ struct
++ {
++ long nack;
++ long rFrameNo;
++ } timeout;
++ struct
++ {
++ long frameNo;
++ long framesPending;
++ } retrFrame;
++ struct
++ {
++ long ChannelId;
++ long DLCI;
++ ulong LcNum;
++ v70TakedownReason reason;
++ } channelInfo;
++ struct
++ {
++ long ChannelId;
++ long stateOld;
++ long stateNew;
++ } stateInfo;
++ } param;
++ ulong v70Time;
++ } v70Status;
++ struct
++ {
++ audioStatusCode code;
++ union
++ {
++ long value;
++ struct
++ {
++ long nReq;
++ long nAvail;
++ } buffer;
++ struct
++ {
++ long nFrames;
++ long nFrameErrors;
++ } statistic;
++ struct
++ {
++ long length;
++ uchar *framePtr;
++ } frame;
++ } param;
++ } audioStatus;
++ struct
++ {
++ v80StatusCode code;
++ union
++ {
++ long value;
++ v80TakedownReason reason;
++ v80ErrorCode error;
++ struct
++ {
++ long nFrames;
++ long nFrameErrors;
++ } statistic;
++ struct
++ {
++ long length;
++ uchar *framePtr;
++ } frame;
++ struct
++ {
++ long code;
++ long value;
++ } inBand;
++ } param;
++ ulong v80Time;
++ } v80Status;
++ struct
++ {
++ v70ParameterCode code;
++ long value;
++ } v70Parameter;
++ struct
++ {
++ breakType type;
++ long length;
++ } breakStatus;
++ struct
++ {
++ callerIDStatusCode code;
++ union
++ {
++ long value;
++ struct
++ {
++ callerIDErrorCode code;
++ long value;
++ } callerIDError;
++ struct
++ {
++ long length;
++ char* ptr;
++ } message;
++ } param;
++ } callerIDStatus;
++ struct
++ {
++ ulong signal;
++ uchar *msg1;
++ long msg1Length;
++ uchar *msg2;
++ long msg2Length;
++ } A8RStatus;
++ struct
++ {
++ overlayStatusCode code;
++ long value;
++ long value2;
++ } overlayStatus;
++ struct
++ {
++ ulong nBits;
++ ulong nBlocks;
++ ulong nBitErrors;
++ ulong nBlockErrors;
++
++ ulong nAudioBits;
++ ulong nAudioBlocks;
++ ulong nAudioSyncErrors;
++ ulong nAudioBlockErrors;
++ } testResults;
++ ulong checksum;
++ struct
++ {
++ ulong sizeM;
++ uchar *filename;
++ } logFileControlStatus;
++ struct
++ {
++ long direction;
++ long module;
++ long message;
++ long data;
++ }
++ faxClass2Status;
++
++ } param;
++ } modemStatusStruct;
++
++typedef void (SM_DECL *statusHandlerType) (void *gDslVars, modemStatusStruct*);
++#endif /* ADSL_MODEM */
++
++/****************************************************************************/
++/* 1. Type definitions. */
++/* */
++/* 1.5 Command structure */
++/****************************************************************************/
++
++typedef struct
++ {
++ Boolean remoteModemIsFlex;
++ uchar countryCode;
++ ushort manufacturerId;
++ uchar licenseeId;
++ uchar productCapabilities;
++ Boolean digitalModeFlag;
++ Boolean prototypeFlag;
++ uchar version;
++ }
++FlexV8bisStruct;
++
++typedef struct
++ {
++ symbolRateMap symbolRates;
++ dataRateMap dataRates;
++ dataRateMap dataRates56k;
++ dataRateMap dataRatesFlex;
++ featureMap features;
++ bitMap auxFeatures;
++ bitMap demodCapabilities;
++ long rateThresholdAdjustment; /* dB Q4 */
++ FlexV8bisStruct flexRemoteV8bisInfo;
++ } dataPumpCapabilities;
++
++#ifndef ADSL_MODEM
++typedef struct SoftwareModemCommandParameters
++ {
++ modemCommandCode command;
++ union
++ {
++ long xmtGain;
++ ulong hybridDelayQ4ms;
++ long modemSampleRate;
++ long timeInMs;
++ long state;
++ long freq;
++ NVRAMConfiguration *nvramConfigurationPtr;
++ long enabled;
++ long value;
++ uchar *phoneNumber;
++ uchar *faxECMPageBufferPtr;
++ CountryDescriptor *countryDescriptorTable;
++ struct
++ {
++ dataRateMap dteRate;
++ bitMap format;
++ } dteRateSpec;
++ struct
++ {
++ v8ControlType code;
++ long value;
++ uchar *buffer;
++ } v8ControlSpec;
++ struct
++ {
++ directionType direction;
++ v8bisConnectionSetup setup;
++ void *capPtr;
++ voidFuncType confirmMsFunc;
++ voidFuncType genMsFunc;
++ xmtHandlerWithRtnValType ogmFunc;
++ } v8bisSpec;
++ struct
++ {
++ directionType direction;
++ } ADSISpec;
++ struct
++ {
++ directionType direction;
++ modulationMap modulations;
++ dataPumpCapabilities capabilities;
++ } modeSpec;
++ struct
++ {
++ long time,
++ freq1,
++ freq2,
++ freq3,
++ freq4,
++ mag1,
++ mag2,
++ mag3,
++ mag4;
++ } toneSpec;
++ struct
++ {
++ long signal;
++ uchar *msg1;
++ long msg1Length;
++ uchar *msg2;
++ long msg2Length;
++ long sig_en;
++ long msg_en;
++ long supp_delay;
++ }
++ v8bisMessageSpec;
++ struct
++ {
++ linkLayerType type;
++ bitMap setup;
++ dataRateMap rxDataRate;
++ dataRateMap txDataRate;
++ long rtDelayQ4ms;
++ rxDataHandlerType rxDataHandlerPtr;
++ txDataHandlerType txDataHandlerPtr;
++ } linkLayerSpec;
++ struct
++ {
++ framerType type;
++ bitMap setup;
++ directionType direction;
++ long fill[2]; /* need to match linkLayerSpec */
++ rxDataHandlerType rxDataHandlerPtr;
++ txDataHandlerType txDataHandlerPtr;
++ } framerSpec;
++ struct
++ {
++ framerParameterCode code;
++ long value;
++ } framerParameterSpec;
++ struct
++ {
++ bitMap callProgressDetectorSetup;
++ signalDetectorType callProgressDetectorPtr; /* if nil, use defaults */
++ signalDetectorType customDetectorPtr; /* if nil, no custom detector */
++ } callProgressMonitorSpec;
++ struct
++ {
++ ulong maxTones; /* maximum number of simultaneous tones to detect */
++ ulong allowableVariance; /* maximum cumulative variance in the eight interpolated frequencies */
++ ulong totalPowerThreshold; /* ignore complete block if power less than this */
++ ulong powerShiftThreshold; /* ignore a bin if its power is less than (totalPowerValue >> powerShiftThreshold) */
++ ulong toneMatchThresholdHz; /* tones within +/- this many Hz of original tone are considered the same tone */
++ ulong binSeparation; /* ignore tones with a spacing of less than this */
++ ulong outsideFreqDeviation; /* an individual value in the interpolated array can be up to this many Hz outside of the expected angle range */
++ } multiToneSpec;
++ struct
++ {
++ uchar *dialString; /* nil limited string for DTMF dialing sequence */
++ long pulseBreakTime,
++ pulseMakeTime,
++ pulseInterDigitTime,
++ toneDigitTime,
++ toneInterDigitTime,
++ toneLoGroupMag,
++ toneHiGroupMag,
++ flashTime,
++ pauseTime,
++ signalWaitTimeout,
++ blindDialingTimeout;
++ bitMap dialerSetup;
++ bitMap callProgressDetectorSetup;
++ signalDetectorType callProgressDetectorPtr; /* if nil, use defaults */
++ signalDetectorType customDetectorPtr; /* if nil, no custom detector */
++ hookHandlerType hookHandlerPtr; /* nil if DTMF dialing specified*/
++ } dialSpec;
++ struct
++ {
++ long timeOn,
++ timeOff,
++ freq;
++ } callingToneSpec;
++ union
++ {
++ statusHandlerType statusHandlerPtr;
++ eyeHandlerType eyeHandlerPtr;
++ logHandlerType logHandlerPtr;
++ rxDataHandlerType rxDataHandlerPtr;
++ txDataHandlerType txDataHandlerPtr;
++ } handlerSpec;
++ struct
++ {
++ breakType type;
++ long length;
++ } breakSpec;
++ struct
++ {
++ long length;
++ uchar *dataPtr;
++ } lapmTestSpec;
++ struct
++ {
++ bitMap setupLapm;
++ rxDataHandlerType rxAudioHandlerPtr;
++ txDataHandlerType txAudioHandlerPtr;
++ } v70SetupSpec;
++ struct
++ {
++ ulong ChannelId;
++ ulong LogChannelNum;
++ ulong PortNum;
++ } EstChannelSpec;
++ struct
++ {
++ ulong ChannelId;
++ } WaitChannelSpec;
++ struct
++ {
++ ulong ChannelId;
++ ulong LogChannelNum;
++ ulong PortNum;
++ ulong DLCI;
++ } RelChannelSpec;
++ struct
++ {
++ audioType type;
++ bitMap setup;
++ dataRateMap rxAudioRate;
++ dataRateMap txAudioRate;
++ rxAudioHandlerType rxAudioHandlerPtr;
++ txAudioHandlerType txAudioHandlerPtr;
++ } audioSpec;
++ struct
++ {
++ long code;
++ long value;
++ } v24Circuit;
++ struct
++ {
++ ulong code;
++ ulong value;
++ ulong minValue;
++ ulong maxValue;
++ } atRegister;
++ struct
++ {
++ long code;
++ uchar *response;
++ } atiSpec;
++ struct
++ {
++ long length;
++ uchar *framePtr;
++ } frameSpec;
++ struct
++ {
++ long code;
++ union
++ {
++ long value;
++ struct
++ {
++ long loFreq1;
++ long hiFreq1;
++ long loFreq2;
++ long hiFreq2;
++ } freqRange;
++ } params;
++ } callProgressParamSpec;
++ struct
++ {
++ v250IdStringCode v250IdCode;
++ uchar *v250IdString;
++ } v250IdSpec;
++
++ } param;
++ } modemCommandStruct;
++
++typedef Boolean (*commandHandlerType) (modemCommandStruct*);
++#endif /* ADSL_MODEM */
++
++
++
++/****************************************************************************/
++/* 2. Constant definitions. */
++/* */
++/* 2.1 Definitive constants */
++/****************************************************************************/
++
++#define kMaxSampleBlockSize 48
++#define kMaxDataBlockSize 48
++
++#define kMaxDialStringLength 127
++#define kCallProgressSampleRate 7200
++
++#define kMaxCallerIDMessageLength 80
++
++/****************************************************************************/
++/* 2. Constant definitions. */
++/* */
++/* 2.2 Bit maps */
++/****************************************************************************/
++
++/* modulationMap */
++
++#define kIdle 0x00000000
++#define kV25 0x00000001
++#define kV8 0x00000002
++#define kCid 0x00000004
++#define kV8bis 0x00000008
++#define kV21 0x00000010
++#define kV22 0x00000020
++#define kV23 0x00000040
++#define kV32 0x00000080
++#define kV34 0x00000100
++#define kX2 0x00000200
++#define kV90 0x00000400
++#define k56Flex 0x00000800
++#define kV27 0x00001000
++#define kV29 0x00002000
++#define kV17 0x00004000
++#define kV34HDX 0x00008000
++#define kV34HDXC 0x00010000
++#define kBell103 0x00100000
++#define kBell212 0x00200000
++#define kDataCallingTone 0x01000000
++#define kFaxCallingTone 0x02000000
++
++#define kV22FastNZConnect 0x04000000
++#define kV22FastNNZConnect 0x08000000
++#define kV22FastConnect (kV22FastNZConnect|kV22FastNNZConnect)
++#define kV22bisFastConnect 0x10000000
++
++
++#define kDataModulations (kV25 | kV8 | kV21 | kV22FastConnect | kV22bisFastConnect | kV22 | kV23 | kV32 | kV34 | kBell103 | kBell212)
++#define kDataOnlyModulations (kV21 | kV22 | kV23 | kV32 | kBell103 | kBell212)
++#define kPCMModulations (kV90 | kX2 | k56Flex)
++
++#define kFaxModulations (kV25 | kV21 | kV27 | kV29 | kV17)
++#define kFaxOnlyModulations (kV27 | kV29 | kV17)
++#define kFaxModulationShift 12
++
++/* symbolRateMap */
++
++#define k1200Hz 0x00000001
++#define k1600Hz 0x00000002
++#define k2400Hz 0x00000004
++#define k2743Hz 0x00000008
++#define k2800Hz 0x00000010
++#define k3000Hz 0x00000020
++#define k3200Hz 0x00000040
++#define k3429Hz 0x00000080
++#define k8000Hz 0x00000100
++
++#define kAllSymbolRates ( k1200Hz | k1600Hz | k2400Hz | k2743Hz | \
++ k2800Hz | k3000Hz | k3429Hz | k8000Hz )
++
++/* dataRateMap */
++
++#define k75bps 0x00000002
++#define k300bps 0x00000004
++#define k600bps 0x00000008
++#define k1200bps 0x00000010
++#define k2400bps 0x00000020
++#define k4800bps 0x00000040
++#define k7200bps 0x00000080
++#define k9600bps 0x00000100
++#define k12000bps 0x00000200
++#define k14400bps 0x00000400
++#define k16800bps 0x00000800
++#define k19200bps 0x00001000
++#define k21600bps 0x00002000
++#define k24000bps 0x00004000
++#define k26400bps 0x00008000
++#define k28800bps 0x00010000
++#define k31200bps 0x00020000
++#define k33600bps 0x00040000
++#define k36000bps 0x00080000
++#define k38400bps 0x00100000
++#define k57600bps 0x00200000
++#define k115200bps 0x00400000
++#define k230400bps 0x00800000
++#define k460800bps 0x01000000
++#define k921600bps 0x02000000
++/*
++ * kPCMRate is used to identify that the reported rate is
++ * PCM modulation rate, and is only used for PCM modulation while
++ * reporting rate !!!!
++ */
++#define kPCMRate 0x40000000
++#define kPCMFlexRate 0x80000000
++#define kAllDataRates 0x0FFFFFFF
++
++/* rates specific for X2 and V.90 */
++#define kPCM25333bps 0x00000001
++#define kPCM26666bps 0x00000002
++#define kPCM28000bps 0x00000004
++#define kPCM29333bps 0x00000008
++#define kPCM30666bps 0x00000010
++#define kPCM32000bps 0x00000020
++#define kPCM33333bps 0x00000040
++#define kPCM34666bps 0x00000080
++#define kPCM36000bps 0x00000100
++#define kPCM37333bps 0x00000200
++#define kPCM38666bps 0x00000400
++#define kPCM40000bps 0x00000800
++#define kPCM41333bps 0x00001000
++#define kPCM42666bps 0x00002000
++#define kPCM44000bps 0x00004000
++#define kPCM45333bps 0x00008000
++#define kPCM46666bps 0x00010000
++#define kPCM48000bps 0x00020000
++#define kPCM49333bps 0x00040000
++#define kPCM50666bps 0x00080000
++#define kPCM52000bps 0x00100000
++#define kPCM53333bps 0x00200000
++#define kPCM54666bps 0x00400000
++#define kPCM56000bps 0x00800000
++#define kPCM57333bps 0x01000000
++
++#define kV90ServerToClientDataRates \
++ ( kPCM28000bps | kPCM29333bps | kPCM30666bps | \
++ kPCM32000bps | kPCM33333bps | kPCM34666bps | \
++ kPCM36000bps | kPCM37333bps | kPCM38666bps | \
++ kPCM40000bps | kPCM41333bps | kPCM42666bps | \
++ kPCM44000bps | kPCM45333bps | kPCM46666bps | \
++ kPCM48000bps | kPCM49333bps | kPCM50666bps | \
++ kPCM52000bps | kPCM53333bps | kPCM54666bps | \
++ kPCM56000bps | kPCM57333bps )
++
++#define kV90ClientToServerDataRates \
++ ( k4800bps | k7200bps | k9600bps | k12000bps | \
++ k14400bps | k16800bps | k19200bps | k21600bps | \
++ k24000bps | k26400bps | k28800bps | k31200bps | \
++ k33600bps )
++
++
++
++#define kX2ServerToClientDataRates \
++ ( kPCM25333bps | kPCM26666bps | kPCM28000bps | \
++ kPCM29333bps | kPCM30666bps | kPCM32000bps | \
++ kPCM33333bps | \
++ kPCM34666bps | kPCM36000bps | kPCM37333bps | \
++ kPCM38666bps | kPCM40000bps | kPCM41333bps | \
++ kPCM42666bps | kPCM44000bps | kPCM45333bps | \
++ kPCM46666bps | kPCM48000bps | kPCM49333bps | \
++ kPCM50666bps | kPCM52000bps | kPCM53333bps | \
++ kPCM54666bps | kPCM56000bps | kPCM57333bps )
++#define kX2ClientToServerDataRates \
++ ( k4800bps | k7200bps | k9600bps | k12000bps | k14400bps | \
++ k16800bps | k19200bps | k21600bps | k24000bps | k26400bps | k28800bps | \
++ k31200bps )
++
++ /*
++ Rates specific for Flex
++ */
++#define kPCMFlex32000bps 0x00000001
++#define kPCMFlex34000bps 0x00000002
++#define kPCMFlex36000bps 0x00000004
++#define kPCMFlex38000bps 0x00000008
++#define kPCMFlex40000bps 0x00000010
++#define kPCMFlex42000bps 0x00000020
++#define kPCMFlex44000bps 0x00000040
++#define kPCMFlex46000bps 0x00000080
++#define kPCMFlex48000bps 0x00000100
++#define kPCMFlex50000bps 0x00000200
++#define kPCMFlex52000bps 0x00000400
++#define kPCMFlex54000bps 0x00000800
++#define kPCMFlex56000bps 0x00001000
++#define kPCMFlex58000bps 0x00002000
++#define kPCMFlex60000bps 0x00004000
++
++#define kFlexServerToClientDataRates \
++ ( kPCMFlex32000bps | kPCMFlex34000bps | kPCMFlex36000bps | kPCMFlex38000bps | \
++ kPCMFlex40000bps | kPCMFlex42000bps | kPCMFlex44000bps | kPCMFlex46000bps | \
++ kPCMFlex48000bps | kPCMFlex50000bps | kPCMFlex52000bps | kPCMFlex52000bps | \
++ kPCMFlex54000bps | kPCMFlex56000bps | kPCMFlex58000bps | kPCMFlex60000bps )
++
++#define kFlexClientToServerDataRates \
++ ( k4800bps | k7200bps | k9600bps | k12000bps | \
++ k14400bps | k16800bps | k19200bps | k21600bps | \
++ k24000bps | k26400bps | k28800bps | k31200bps )
++
++
++#define k2400BitShift 5
++#define k4800BitShift 6
++
++#define kPCM28000bpsShift 2
++
++#define kV21Rates k300bps
++#define kV22Rates k1200bps
++#define kV22bisRates (k1200bps | k2400bps)
++#define kV23Rates (k75bps | k1200bps)
++#define kCidRates (k1200bps)
++#define kV32Rates (k4800bps | k9600bps)
++#define kV32bisRates (kV32Rates | k7200bps | k12000bps | k14400bps)
++#define kV32terboRates (kV32bisRates | k16800bps | k19200bps)
++#define kV34Rates ( k2400bps | k4800bps | k7200bps | k9600bps | k12000bps | k14400bps | \
++ k16800bps | k19200bps | k21600bps | k24000bps | k26400bps | k28800bps | \
++ k31200bps | k33600bps )
++
++#define kV27Rates (k2400bps | k4800bps)
++#define kV29Rates (k4800bps | k7200bps | k9600bps)
++#define kBell103Rates k300bps
++#define kBell212Rates k1200bps
++
++
++/* Demodulator capabilities */
++#define kNeecEnabled 0x00000001
++#define kPFeecEnabled 0x00000002
++#define kIeecEnabled 0x00000004
++#define kFeecEnabled 0x00000008
++
++#define kRapidEqualizerTraining 0x00000010
++#define kRapidPECTraining 0x00000020
++#define kRapidECTraining 0x00000040
++#define kAutoLoadReductionEnabled 0x00000080
++
++#define kTimingTrackingEnabled 0x00000100
++#define kPhaseLockedLoopEnabled 0x00000200
++#define kFeecPhaseLockedLoopEnabled 0x00000400
++#define kPhaseJitterTrackingEnabled 0x00000800
++
++#define kClockErrorTrackingEnabled 0x00001000
++#define kFreqOffsetTrackingEnabled 0x00002000
++#define kFeecFreqOffsetTrackingEnabled 0x00004000
++
++#define kShorterNeecEnabled 0x00008000
++#define kShorterPFeecEnabled 0x00010000
++#define kFrondEndHPFilterEnabled 0x00020000
++#define kGainControlEnabled 0x00040000
++#define kPhaseHitControlEnabled 0x00080000
++#define kBandEdgeCorrectorEnabled 0x00100000
++#define kDisableFaxFastClearDown 0x00200000
++
++#define kImdOffsetCompensationEnabled 0x00400000
++
++#define kV34ShortEqlLengthExtShift 23
++#define kV34ShortEqlLengthExtMask (0x3<<kV34ShortEqlLengthExtShift)
++#define kV34EqlLengthReductionEnabled (1<<(kV34ShortEqlLengthExtShift+2))
++#define kPCMIeecLengthReductionEnabled (1<<(kV34ShortEqlLengthExtShift+3))
++
++/* featureMap */
++
++#define kAllFeatures 0xFFFFFFFF
++
++#define kAutomodingEnabled 0x00000001 /* bit 1 */
++#define kAutomodingDisabled 0x00000000 /* bit 1 */
++
++#define kV8SendCIEnabled 0x00000002 /* bit 2 */
++#define kV8SendCIDisabled 0x00000000 /* bit 2 */
++
++#define kV34CMEModem 0x00000004 /* bit 3 */
++#define kV34NotCMEModem 0x00000000 /* bit 3 */
++
++#define kV34ExtraINFOPreamble 0x00000008 /* bit 4 */
++
++#define kRetrainingEnabled 0x00000010
++#define kRateRenegotiationEnabled 0x00000020
++#define kTrellisCodingEnabled 0x00000040
++
++/* Fax specific features */
++#define kFaxShortTraining 0x00000080
++#define kFaxEchoSuppressionEnabled 0x00000100
++
++/* V.22/V.22bis specific features */
++#define kV22GuardTone1800HzEnabled 0x00000200
++#define kV22GuardTone550HzEnabled 0x00000400
++
++
++/* V.34 specific features */
++
++#define kV34bisEnabled 0x00000800
++
++#define kV34PowerReductionAllowed 0x00001000
++#define kAuxChannelEnabled 0x00002000
++#define kAuxChannelDisabled 0x00000000
++#define kV34TrellisEncoderTypeMask 0x0000C000
++#define kV34TrellisEncoderTypeShift 14
++
++#define kTRN16 0x00010000
++#define kAssymDataRatesEnabled 0x00020000
++#define kNonLinearCodingEnabled 0x00040000
++#define kConstShapingEnabled 0x00080000
++#define kPrecodingEnabled 0x00100000
++
++#define kV34LoFcAt2400HzEnabled 0x00200000
++#define kV34HiFcAt2400HzEnabled 0x00400000
++#define kV34LoFcAt2743HzEnabled 0x00800000
++#define kV34HiFcAt2743HzEnabled 0x01000000
++#define kV34LoFcAt2800HzEnabled 0x02000000
++#define kV34HiFcAt2800HzEnabled 0x04000000
++#define kV34LoFcAt3000HzEnabled 0x08000000
++#define kV34HiFcAt3000HzEnabled 0x10000000
++#define kV34LoFcAt3200HzEnabled 0x20000000
++#define kV34HiFcAt3200HzEnabled 0x40000000
++#define kV34LoFcAt3429HzEnabled 0x80000000
++#define kV34HiFcAt3429HzEnabled 0x80000000
++
++/* auxiliary features definintions map */
++
++#define kLoopbackTestFinish 0x00000000
++#define kLoopbackTestV54Loop1 0x00000001
++#define kLoopbackTestV54Loop2 0x00000002
++#define kLoopbackTestV54Loop3 0x00000003
++#define kLoopbackTestTypeMask 0x00000003
++#define kLoopbackTestAutoRespondEnabled 0x00000004
++#define kLoopbackSelfTest 0x00000008
++
++#define kPreempFilterMask 0x000000F0
++#define kPreempFilterShift 4
++
++#define kPcmCodingTypeMuLaw 0x00000100
++#define kPcmServerToServerEnabled 0x00000200
++#define kPcmIsServerModem 0x00000400
++#define kPcmAnalogModemAvailable 0x00000800
++#define kPcmDigitalModemAvailable 0x00001000
++#define kPcmDceOnDigitalNetwork 0x00002000
++#define kPcmDModemPwrCalAtCodecOut 0x00004000
++#define kPcm3429UpstreamAvailable 0x00008000
++
++#define kPcmSpectralShapingBitsMask 0x00070000
++#define kPcmSpectralShapingBitsShift 16
++#define kV90ServerNotDetSbarAfterJdbarFix 0x00080000
++
++#define kAutomoderPassive 0x00400000
++
++#define kV8HoldANSamUntilDetCI 0x00800000
++#define kFaxSendFromOrgSide 0x01000000
++#define kFaxV34HDX2400bpsCtrlChan 0x02000000
++#define kFaxV34HDXAllowAsymCtrlChan 0x04000000
++#define kV8ANSamStageDisabled 0x08000000
++
++#define kFlexSkipV8bis 0x10000000
++#define kV34ControlChannelEnabled 0x20000000
++#define kV34SeamlessRateChangeEnabled 0x40000000
++
++#define kPTTTest 0x80000000
++
++/* call progress detection Map */
++
++#define kDialTone 0x00000001
++#define kRingBack 0x00000002
++#define kBusy 0x00000004
++#define kReorder 0x00000008
++#define k2ndDTn 0x00000010
++#define kBongTone 0x00000020
++
++/* Break type bit settings */
++#define kExpedited 0x0001
++#define kDestructive 0x0002
++
++/* async Framer setup map */
++
++#define kNDataBitsMask 0x03
++#define k5DataBits 0x00
++#define k6DataBits 0x01
++#define k7DataBits 0x02
++#define k8DataBits 0x03
++
++#define kNDataBitsShift 0
++#define kNDataBitsOffset 5
++
++#define kParityTypeMask 0x1C
++#define kNoParity 0x00
++#define kOddParity 0x04
++#define kEvenParity 0x08
++#define kMarkParity 0x0C
++#define kSpaceParity 0x10
++
++#define kNStopBitsMask 0x60
++#define k1StopBits 0x00
++#define k2StopBits 0x20
++
++#define kNStopBitsShift 5
++#define kNStopBitsOffset 1
++
++/* Sync Framer setup map */
++
++#define kUnderrunCharMask 0xff
++#define kRepeatLastCharOnUnderrun 0x100
++
++/* HDLC sync framer setup maps */
++#define kNFlagsBeforeFramesMask 0x3F
++#define kNFlagsBeforeFramesShift 0
++
++#define kNFlagsBetweenFramesMask 0x3F
++#define kNFlagsBetweenFramesShift 6
++
++#define k32BitCRC 0x1000
++#define kFlagSharingEnabled 0x2000
++
++#define kNFlagsBeforeReportMask 0x03 /* no. of *extra* flags reqd before frame */
++#define kNFlagsBeforeReportShift 14
++
++#define kTxDeferredCRC 0x10000
++#define kRxDeferredCRC 0x20000
++#define kTxIdleMarks 0x40000
++#define kNoCRC 0x80000
++
++/* SAM framer setup maps */
++
++#define kSAMTransparentIdleTypeMask 0x00000003
++#define kSAMTransparentIdleTypeShift 0
++#define kSAMFramedIdleTypeMask 0x00000004
++#define kSAMFramedIdleTypeShift 2
++#define kSAMFramedOverrunActionMask 0x00000010
++#define kSAMFramedOverrunActionShift 4
++#define kSAMHalfDuplexModeMask 0x00000020
++#define kSAMHalfDuplexModeShift 5
++#define kSAMCRCTypeMask 0x000000C0
++#define kSAMCRCTypeShift 6
++#define kSAMNRZIEnabledMask 0x00000100
++#define kSAMNRZIEnabledShift 8
++#define kSAMSyn1Mask 0x00FF0000
++#define kSAMSyn1Shift 16
++#define kSAMSyn2Mask 0xFF000000
++#define kSAMSyn2Shift 24
++
++/* <trans_idle> */
++#define kSAM8bitSYNHuntDisabled 0
++#define kSAM8bitSYNHuntEnabled ((ulong)1 << kSAMTransparentIdleTypeShift)
++#define kSAM16bitSYNHuntEnabled ((ulong)2 << kSAMTransparentIdleTypeShift)
++
++/* <framed_idle> */
++#define kSAMSendFlagsOnIdle 0
++#define kSAMSendMarksOnIdle ((ulong)1 << kSAMFramedIdleTypeShift)
++
++/* <framed_un_ov> */
++#define kSAMAbortOnUnderrun 0
++#define kSAMFlagsOnUnderrun ((ulong)1 << kSAMFramedOverrunActionShift)
++
++/* <hd_auto> */
++#define kSAMHalfDuplexNoAuto 0
++#define kSAMHalfDuplexAuto ((ulong)1 << kSAMHalfDuplexModeShift)
++
++
++/* <crc_type> */
++#define kSAMNoCRC 0
++#define kSAM16bitCRC ((ulong)1 << kSAMCRCTypeShift)
++#define kSAM32bitCRC ((ulong)2 << kSAMCRCTypeShift)
++
++/* <nrzi_en> */
++#define kSAMNRZIDisabled 0
++#define kSAMNRZIEnabled ((ulong)1 << kSAMNRZIEnabledShift)
++
++
++/* LAPM setup maps */
++#define kLapmDirection 0x00000001 /* Bit 0 */
++#define kLapmSREJEnabled 0x00000002 /* Bit 1 */
++#define kLapmDetectionEnabled 0x00000004 /* Bit 2 */
++#define kLapmLongADPEnabled 0x00000008 /* Bit 3 */
++
++#define kLapmCompressionEnabledMask 0x00000030
++#define kLapmTxCompressionEnabled 0x00000010 /* Bit 4 */
++#define kLapmRxCompressionEnabled 0x00000020 /* Bit 5 */
++#define kLapmCompressionEnabledShift 4
++
++#define kLapmRetryLimitMask 0x000000C0 /* Bits 6,7 */
++
++#define kLapmNoRetryLimit 0x00000000
++#define kLapm4Retries 0x00000040
++#define kLapm8Retries 0x00000080
++#define kLapm20Retries 0x000000C0
++
++#define kLapmWindowSizeMask 0x00001F00 /* Bits 8-12 */
++#define kLapmWindowSizeShift 8
++
++#define kLapmWindowSize8 0x00000800
++#define kLapmWindowSize15 0x00000F00
++
++
++#define kLapmInfoFieldSizeMask 0x0000E000 /* Bits 13-15 */
++#define kLapmInfoField8Bytes 0x00000000
++#define kLapmInfoField16Bytes 0x00002000
++#define kLapmInfoField32Bytes 0x00004000
++#define kLapmInfoField64Bytes 0x00006000
++#define kLapmInfoField128Bytes 0x00008000
++#define kLapmInfoField192Bytes 0x0000A000
++#define kLapmInfoField256Bytes 0x0000C000
++#define kLapmInfoField512Bytes 0x0000E000
++#define kLapmInfoFieldSizeShift 13
++
++#define kLapmT400Mask 0x00030000 /* Bits 16-17 */
++#define kLapmAutoT400 0x00000000
++#define kLapm750msT400 0x00010000
++#define kLapm3secT400 0x00020000
++#define kLapm30secT400 0x00030000
++
++#define kLapmT401Mask 0x000C0000 /* Bits 18-19 */
++#define kLapmAutoT401 0x00000000
++#define kLapm750msT401 0x00040000
++#define kLapm3secT401 0x00080000
++#define kLapm6secT401 0x000C0000
++
++#define kLapmT403Mask 0x00300000 /* Bits 20-21 */
++#define kLapmAutoT403 0x00000000
++#define kLapm750msT403 0x00100000
++#define kLapm2secT403 0x00200000
++#define kLapm4secT403 0x00300000
++
++
++
++#define kLapmDictSizeMask 0x00C00000 /* Bits 22-23 */
++#define kLapmDictSize512 0x00000000
++#define kLapmDictSize1024 0x00400000
++#define kLapmDictSize2048 0x00800000
++#define kLapmDictSize4096 0x00C00000
++
++#define kLapmStringSizeMask 0xFF000000 /* Bits 24-31 */
++#define kLapmStringSizeShift 24
++
++/* MNP setup maps */
++
++#define kMnpMinPLevel 0x00000001 /* Bit 0: 1 - Minimal, 0 - Standard */
++#define kMnpStdPLevel 0x00000000 /* Bit 0: 1 - Minimal, 0 - Standard */
++
++#define kMnpOptimizationEnabled 0x00000002 /* Bit 1 */
++#define kMnpOptimizationDisabled 0x00000000 /* Bit 1 */
++
++#define kMnpCompressionEnabled 0x00000004 /* Bit 2 */
++#define kMnpCompressionDisabled 0x00000000 /* Bit 2 */
++
++#define kMnpClassMask 0x00000018
++#define kMnpClassShift 3
++#define kMnpClass1 0x00000008
++#define kMnpClass2 0x00000010
++#define kMnpClass3 0x00000018 /* Bits 3,4 */
++
++#define kMnpMaxRetryMask 0x00000060 /* Bits 5,6 */
++#define kMnpMaxRetryShift 5
++#define kMnpNoRetryLimit 0x00000000
++#define kMnp4Retries 0x00000020
++#define kMnp8Retries 0x00000040
++#define kMnp20Retries 0x00000060
++
++#define kMnpInfoFieldSizeMask 0x00000380 /* Bits 7-9 */
++#define kMnpInfoFieldSizeShift 7
++#define kMnpInfoField8Bytes 0x00000000
++#define kMnpInfoField16Bytes 0x00000080
++#define kMnpInfoField32Bytes 0x00000100
++#define kMnpInfoField64Bytes 0x00000180
++#define kMnpInfoField128Bytes 0x00000200
++#define kMnpInfoField192Bytes 0x00000280
++#define kMnpInfoField256Bytes 0x00000300
++#define kMnpInfoField260Bytes 0x00000380
++
++#define kMnpT400Mask 0x00003000 /* Bits 12,13 */
++#define kMnpT400Shift 12
++#define kMnpAutoT400 0x00000000
++#define kMnp750msT400 0x00001000
++#define kMnp3secT400 0x00002000
++#define kMnp6secT400 0x00003000
++
++#define kMnpT401Mask 0x0000C000 /* Bits 14,15 */
++#define kMnpT401Shift 14
++#define kMnpAutoT401 0x00000000
++#define kMnp750msT401 0x00004000
++#define kMnp3secT401 0x00008000
++#define kMnp6secT401 0x0000C000
++
++#define kMnpT403Mask 0x00030000 /* Bits 16,17 */
++#define kMnpT403Shift 16
++#define kMnpAutoT403 0x00000000
++#define kMnp60secT403 0x00010000
++#define kMnp600secT403 0x00020000
++#define kMnp3600secT403 0x00030000
++
++#define kMnpFallbackTypeMask 0x000C0000 /* Bits 18,19 */
++#define kMnpFallbackTypeShift 18
++#define kMnpNoFallback 0x00000000
++#define kMnpFallbackTime 0x00040000
++#define kMnpFallback200 0x00080000
++#define kMnpFallbackChar 0x000C0000
++
++#define kMnpWindowSizeMask 0x00300000 /* Bits 20,21 */
++#define kMnpWindowSizeShift 20
++#define kMnp1Frame 0x00000000
++#define kMnp4Frames 0x00100000
++#define kMnp8Frames 0x00200000
++#define kMnp16Frames 0x00300000
++
++#define kMnpDirection 0x00800000 /* Bit 22 */
++
++#define kMnpFallbackCharMask 0xFF000000 /* Bit 24-31 */
++#define kMnpFallbackCharShift 24
++
++/* kV34HDXTurnOffCurrentModeCmd state parameter values */
++
++#define kV34HDXTurnOffAsClearDown 0
++#define kV34HDXTurnOffFromControlSource 1
++#define kV34HDXTurnOffFromControlDestination 2
++#define kV34HDXTurnOffFromPrimarySource 3
++#define kV34HDXTurnOffFromPrimaryDestination 4
++
++/* V70 setup maps */
++
++#define kV70Direction 0x00000001 /* Bit 0 */
++#define kV70uIHEnabled 0x00000002 /* Bit 1 */
++#define kV70AudioHeaderEnabled 0x00000004 /* Bit 2 */
++#define kV70SilenceSupprEnabled 0x00000008 /* Bit 3 */
++
++#define kV70SuspendResumeShift 4
++#define kV70SuspendResumeMask (3 << kV70SuspendResumeShift)
++#define kV70SuspendResumeDisabled 0x00000000 /* Bit 4,5 */
++#define kV70SuspendResumeWAddr 0x00000010 /* Bit 4 */
++#define kV70SuspendResumeWoAddr 0x00000020 /* Bit 5 */
++
++#define kV70CrcLengthShift 6
++#define kV70CrcLengthMask (3 << kV70CrcLengthShift)
++#define kV70CrcLength16 0x00000000 /* Bit 6,7 */
++#define kV70CrcLength8 0x00000040 /* Bit 6 */
++#define kV70CrcLength32 0x00000080 /* Bit 7 */
++
++#define kV70BlockingFactorShift 8
++#define kV70BlockingFactorMask (3 << kV70BlockingFactorShift)
++#define kV70BlockingFactor1 0x00000000 /* Bit 8,9 */
++#define kV70BlockingFactor2 0x00000100 /* Bit 8 */
++#define kV70BlockingFactor3 0x00000200 /* Bit 9 */
++#define kV70BlockingFactor4 0x00000300 /* Bit 8,9 */
++
++#define kV70InitChannelsShift 10
++#define kV70InitChannelsMask (1 << kV70InitChannelsShift)
++#define kV70InitNoChannels 0x00000000 /* Bit 10,11 */
++#define kV70InitDataChannel 0x00000400 /* Bit 10,11 */
++#define kV70InitAudioChannel 0x00000800 /* Bit 10,11 */
++#define kV70InitBothChannels 0x00000C00 /* Bit 10,11 */
++
++#define kV70OOBEnabled 0x00001000 /* Bit 12 */
++
++/* V80 setup maps */
++
++#define kV80Direction 0x00000001 /* Bit 0 */
++
++#define kV80ModeShift 1
++#define kV80ModeMask (3 << kV80ModeShift)
++#define kV80SyncMode (0 << kV80ModeShift)
++#define kV80TunnellingMode (1 << kV80ModeShift)
++#define kV80SamMode (2 << kV80ModeShift)
++#define kV80SamTransparentMode (2 << kV80ModeShift)
++#define kV80SamFramedMode (3 << kV80ModeShift)
++
++#define kV80TransIdleShift 3
++#define kV80TransIdleMask (3 << kV80TransIdleShift)
++#define kV80TransIdleNoHunt (0 << kV80TransIdleShift)
++#define kV80TransIdleHunt8 (1 << kV80TransIdleShift)
++#define kV80TransIdleHunt16 (2 << kV80TransIdleShift)
++
++#define kV80FrameIdleShift 5
++#define kV80FrameIdleMask (1 << kV80FrameIdleShift)
++#define kV80FrameIdleFlags (0 << kV80FrameIdleShift)
++#define kV80FrameIdleMarks (1 << kV80FrameIdleShift)
++
++#define kV80FrameUnOvShift 6
++#define kV80FrameUnOvMask (1 << kV80FrameUnOvShift)
++#define kV80FrameUnOvAbort (0 << kV80FrameUnOvShift)
++#define kV80FrameUnOvFlag (1 << kV80FrameUnOvShift)
++
++#define kV80HdAutoShift 7
++#define kV80HdAutoMask (1 << kV80HdAutoShift)
++#define kV80HdAutoNormal (0 << kV80HdAutoShift)
++#define kV80HdAutoExtended (1 << kV80HdAutoShift)
++
++#define kV80CrcTypeShift 8
++#define kV80CrcTypeMask (3 << kV80CrcTypeShift)
++#define kV80NoCrc (0 << kV80CrcTypeShift)
++#define kV80Crc16 (1 << kV80CrcTypeShift)
++#define kV80Crc32 (2 << kV80CrcTypeShift)
++
++#define kV80NrziShift 10
++#define kV80NrziMask (1 << kV80NrziShift)
++#define kV80NrziDisabled (0 << kV80NrziShift)
++#define kV80NrziEnabled (1 << kV80NrziShift)
++
++#define kV80Syn1Mask 0x00FF0000 /* Bit 16-23 */
++#define kV80Syn1Shift 16
++#define kV80Syn2Mask 0xFF000000 /* Bit 24-31 */
++#define kV80Syn2Shift 24
++
++/* kStartCallProgressMonitorCmd setup masks */
++
++#define kDTMFDetectorDebouncerEnabled 0x0001
++#define kModemSignalDetectorDebouncerEnabled 0x0002
++#define kCallProgressDetectorDebouncerEnabled 0x0004
++#define kCustomSignalDebouncerEnabled 0x0008
++#define kFaxCallingToneSuppressionEnabled 0x0010
++#define kDataCallingToneSuppressionEnabled 0x0020
++#define kCISuppressionEnabled 0x0040
++#define kAnsSuppressionEnabled 0x0080
++
++/* kDialCmd setup masks (dialerSetup bit fields) */
++
++#define kDTMFDialingEnabled 0x0001
++#define kPulseDialingEnabled 0x0002
++#define kModeSwitchEnabled 0x0004
++#define kBlindDialingEnabled 0x0008
++#define kPulseDialingMethodMask 0x0030
++#define kDialModifierTranslationMask 0x00C0
++#define kFlashWhilePulseDialingEnabled 0x0100
++
++/* Pulse dialing method */
++#define kPulseDialingNPulsesPerDigit 0x0000
++#define kPulseDialingNplusOnePulsesPerDigit 0x0010
++#define kPulseDialingTenMinusNPulsesPerDigit 0x0020
++
++/* Dial modifier translation */
++#define kTreatWasPause 0x0040 /* Tread 'W' modifier as pause */
++#define kTreatCommaAsWaitForDialtone 0x0080
++
++#ifdef TI_C6X
++#include "C6xDefs.h"
++#endif
++#ifdef PENTIUM_MMX
++#include "PentiumDefs.h"
++#endif
++
++
++#if defined(DSP16K) && !defined(SoftModemGlobals)
++/* ensure that code generator does not use r5 */
++register int *softmodem_h_should_not_be_included_after_softmodem_gh asm("r5");
++#endif
++
++/****************************************************************************/
++/* 3. Interface functions. */
++/* */
++/****************************************************************************/
++
++#ifdef ADSL_MODEM
++
++#ifndef SoftDslHeader
++#include "SoftDsl.h"
++#endif
++extern char* SM_DECL SoftModemGetRevString(void);
++extern char* SM_DECL SoftModemGetProductName(void);
++extern char* SM_DECL SoftModemGetBuildDate(void);
++extern char* SM_DECL SoftModemGetFullManufacturerName(void);
++extern char* SM_DECL SoftModemGetShortManufacturerName(void);
++extern int SM_DECL SoftModemRevStringSize(void);
++extern char* SM_DECL SoftModemGetVendorIDString(void);
++extern char* SM_DECL SoftModemGetT1413VendorIDString(void);
++extern char* SM_DECL SoftModemGetSerialNumberString(void);
++extern int SM_DECL SoftModemSerNumStringSize(void);
++#define SoftDslGetProductName SoftModemGetProductName
++#define SoftDslGetBuildDate SoftModemGetBuildDate
++#define SoftDslGetFullManufacturerName SoftModemGetFullManufacturerName
++#define SoftDslGetShortManufacturerName SoftModemGetShortManufacturerName
++
++#else /* !ADSL_MODEM */
++
++extern void SM_DECL SoftModemSetMemoryPtr (void *varsPtr);
++extern void* SM_DECL SoftModemGetMemoryPtr (void);
++extern void SM_DECL SoftModemSetRefData (void *varsPtr);
++extern void* SM_DECL SoftModemGetRefData (void);
++extern int SM_DECL SoftModemGetMemorySize (void);
++extern void SM_DECL SoftModemInit (void);
++extern void SM_DECL SoftModemReset (void);
++extern void SM_DECL SoftModemLineHandler (int sampleCount, short *srcPtr, short *dstPtr);
++extern void SM_DECL SoftModemTimer (long timeQ24ms);
++extern Boolean SM_DECL SoftModemCommandHandler (modemCommandStruct *cmdPtr);
++extern int SM_DECL SoftModemGetExternalMemorySize(void);
++extern void SM_DECL SoftModemSetExternalMemoryPtr(void *varsPtr);
++
++extern void SM_DECL SoftModemSetPcmCoding (pcmCodingType pcmCoding);
++extern void SM_DECL SoftModemPcmLineHandler (int sampleCount, uchar *srcPtr, uchar *dstPtr);
++
++/* SoftModem IO functions */
++extern int SM_DECL SoftModemWrite(int nBytes, uchar* srcPtr);
++extern int SM_DECL SoftModemRead(int nBytes, uchar* dstPtr);
++extern int SM_DECL SoftModemWriteFrame(int nBytes, uchar* srcPtr);
++extern int SM_DECL SoftModemReadFrame(int maxFrameSize, uchar* dstPtr);
++extern int SM_DECL SoftModemCountWritePending(void);
++extern int SM_DECL SoftModemCountReadPending(void);
++extern int SM_DECL SoftModemWriteSpaceAvailable(void);
++extern void SM_DECL SoftModemWriteFlush(void);
++extern void SM_DECL SoftModemReadFlush(void);
++extern int SM_DECL SoftModemGetWriteBufferSize(void);
++extern int SM_DECL SoftModemGetReadBufferSize(void);
++
++#ifdef AUDIO
++extern int SM_DECL SoftModemAudioHandler(int sampleCount, short *srcPtr, short *dstPtr);
++extern int SM_DECL SoftModemAudioRxDataHandler(int nBytes, uchar* srcPtr);
++extern int SM_DECL SoftModemAudioTxDataHandler(int nBytes, uchar* dstPtr);
++#endif
++
++
++#define SoftModemSetGlobalPtr SoftModemSetMemoryPtr
++#define SoftModem SoftModemLineHandler
++#ifndef LINKLAYER_V42BIS_LARGE_DICTIONARY
++#define kSoftModemMaxMemorySize (65536)
++#else
++#define kSoftModemMaxMemorySize (65536 + 8192)
++#endif
++
++/*
++ * Internal functions
++ */
++extern long SM_DECL SoftModemGetDCOffset(void);
++extern void SM_DECL SoftModemDisableDCOffsetTracking(void);
++extern void SM_DECL SoftModemEnableDCOffsetTracking(void);
++extern long SM_DECL SoftModemGetRcvPower(void);
++extern ulong SM_DECL SoftModemGetHybridDelay(void);
++extern void SM_DECL SoftModemStatusHandler (modemStatusStruct *status);
++extern Boolean SM_DECL SoftModemInternalCommandHandler (modemCommandStruct *cmdPtr);
++extern void SM_DECL SoftModemInternalStatusHandler (modemStatusStruct *status);
++extern void SM_DECL SoftModemSetControllerOnlyMode(commandHandlerType externalDataPumpCommandHandlerPtr);
++extern char* SM_DECL SoftModemGetRevString(void);
++extern char* SM_DECL SoftModemGetProductName(void);
++extern char* SM_DECL SoftModemGetBuildDate(void);
++extern char* SM_DECL SoftModemGetFullManufacturerName(void);
++extern char* SM_DECL SoftModemGetShortManufacturerName(void);
++extern int SM_DECL SoftModemRevStringSize(void);
++extern char* SM_DECL SoftModemGetVendorIDString(void);
++extern char* SM_DECL SoftModemGetSerialNumberString(void);
++extern void SM_DECL SoftModemAuxTxDataHandler(int nBytes, uchar *dataPtr);
++extern void SM_DECL SoftModemAuxRxDataHandler(int nBytes, uchar *dataPtr);
++extern void SM_DECL SoftModemTxDataHandler(int nBytes, uchar *dataPtr);
++extern void SM_DECL SoftModemRxDataHandler(int nBytes, uchar *dataPtr);
++extern void SM_DECL SoftModemATPrintf(uchar *format, void *arg1, void *arg2, void *arg3);
++
++#define SoftModemSetInputSaturationLimit(limit) (gSystemVars.inputSignalLimit = limit)
++#define SoftModemResetInputSaturationLimit() (gSystemVars.inputSignalLimit = 0)
++
++#endif /* !ADSL_MODEM */
++
++#endif /* SoftModemPh */
+diff -urN linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/SoftModemTypes.h linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/SoftModemTypes.h
+--- linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/SoftModemTypes.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/bcm96348/softdsl/SoftModemTypes.h 2006-06-26 09:07:10.000000000 +0200
+@@ -0,0 +1,292 @@
++/*
++<:copyright-broadcom
++
++ Copyright (c) 2002 Broadcom Corporation
++ All Rights Reserved
++ No portions of this material may be reproduced in any form without the
++ written permission of:
++ Broadcom Corporation
++ 16215 Alton Parkway
++ Irvine, California 92619
++ All information contained in this document is Broadcom Corporation
++ company private, proprietary, and trade secret.
++
++:>
++*/
++/****************************************************************************
++ *
++ * SoftModemTypes.h
++ *
++ *
++ * Description:
++ * This file contains some of the type declarations for SoftModem
++ *
++ * Copyright (c) 1993-1997 AltoCom, Inc. All rights reserved.
++ * Authors: Mark Gonikberg, Haixiang Liang.
++ *
++ * $Revision: 1.9 $
++ *
++ * $Id: SoftModemTypes.h,v 1.9 2004/04/13 00:16:59 ilyas Exp $
++ *
++ * $Log: SoftModemTypes.h,v $
++ * Revision 1.9 2004/04/13 00:16:59 ilyas
++ * Merged the latest ADSL driver changes
++ *
++ * Revision 1.8 2004/01/24 01:35:33 ytan
++ * add multi-section lmem swap
++ *
++ * Revision 1.7 2001/09/21 19:19:01 ilyas
++ * Minor fixes for VxWorks build
++ *
++ * Revision 1.6 2001/08/16 02:16:39 khp
++ * - added definitions for SLOW_DATA and FAST_TEXT, defined to nothing
++ * except when bcm47xx && USE_SLOW_DATA or USE_FAST_TEXT. Any function
++ * that needs to run fast should be marked with FAST_TEXT. Any data that
++ * is not referenced often should be marked with SLOW_DATA.
++ *
++ * Revision 1.5 2001/03/30 00:49:59 liang
++ * Changed warning output message.
++ *
++ * Revision 1.4 2000/06/21 22:24:40 yongbing
++ * Modify WARN micro to limit the number of same warnings printed
++ *
++ * Revision 1.3 1999/08/05 20:02:13 liang
++ * Merged with the softmodem top of the tree on 08/04/99.
++ *
++ * Revision 1.2 1999/01/27 22:14:29 liang
++ * Merge with SoftModem_3_1_02.
++ *
++ * Revision 1.19 1998/11/17 04:02:39 yura
++ * Fixed WARN and ASSERT redefinition warning for WinNT targets
++ *
++ * Revision 1.18 1998/08/26 19:20:43 scott
++ * Commented out EXCLUDE_CYGWIN32_TYPES define
++ *
++ * Revision 1.17 1998/08/13 19:03:06 scott
++ * Added BitField definition and INT_IS_LONG
++ *
++ * Revision 1.16 1998/08/08 03:39:55 scott
++ * The DEBUG_PTR_ENABLED macro can be used to enable only the DEBUG_PTR macros
++ *
++ * Revision 1.15 1998/07/28 22:21:31 mwg
++ * Fixed problems with NULL & nil being defined incorrectly
++ *
++ * Revision 1.14 1998/07/08 17:09:17 scott
++ * Define ASSERT and WARN only if not already defined
++ *
++ * Revision 1.13 1998/07/02 20:46:34 scott
++ * Added workaround for building certain builds with older SunOS
++ *
++ * Revision 1.12 1998/02/09 18:24:49 scott
++ * Defined "Private" as nothing for GreenHill (to prevent erroneous section
++ * allocations for data)
++ *
++ * Revision 1.11 1997/08/29 21:39:24 scott
++ * Added check for LONG_IS_INT define (for TI C6X support)
++ *
++ * Revision 1.10 1997/05/29 19:50:23 mwg
++ * Added code to avoid type redefintions under SunOS.
++ *
++ * Revision 1.9 1997/03/19 18:35:08 mwg
++ * Changed copyright notice.
++ *
++ * Revision 1.8 1997/02/11 00:05:53 mwg
++ * Minor adjustments for Pentium optimization.
++ *
++ * Revision 1.7 1997/01/11 01:30:47 mwg
++ * Added new macro WARN -- the same as ASSERT but without exit.
++ *
++ * Revision 1.6 1996/08/22 20:07:39 liang
++ * When ASSERT fires, only print out information, don't exit.
++ *
++ * Revision 1.5 1996/05/06 06:49:10 mwg
++ * Fixed linux problems.
++ *
++ * Revision 1.4 1996/05/02 08:40:16 mwg
++ * Merged in Chromatic bug fixes.
++ *
++ * Revision 1.3 1996/04/01 20:59:53 mwg
++ * Added macros to setup and use debug pointer.
++ *
++ * Revision 1.2 1996/02/27 01:50:04 mwg
++ * Added ASSERT() macro.
++ *
++ * Revision 1.1.1.1 1996/02/14 02:35:13 mwg
++ * Redesigned the project directory structure. Merged V.34 into the project.
++ *
++ * Revision 1.2 1995/12/03 06:59:31 mwg
++ * Fixed all gcc varnings. We are now running under Linux on a PC!
++ *
++ *****************************************************************************/
++#ifndef SoftModemTypesh
++#define SoftModemTypesh
++
++#ifdef LONG_SHORTS
++#define short long
++#define ushort unsigned long
++#endif
++
++typedef signed char schar;
++typedef unsigned char uchar;
++
++#if 0 /* This is not currently required */
++#if defined(_CYGWIN32) && defined(DEBUG)
++#define EXCLUDE_CYGWIN32_TYPES
++#endif
++#endif
++
++#if !defined(_SYS_TYPES_H) || !defined(TARG_OS_RTEMS)
++#if defined(_CFE_)
++ typedef unsigned int uint;
++ typedef unsigned long ulong;
++ typedef unsigned short ushort;
++#elif defined(TARG_OS_RTEMS)
++#if defined(HOST_ARCH_LINUX)
++ typedef unsigned int uint;
++#endif
++ typedef unsigned long ulong;
++#if defined(HOST_ARCH_LINUX)
++ typedef unsigned short ushort;
++#endif
++#elif defined(EXCLUDE_CYGWIN32_TYPES) || (!defined _NO_TYPE_DEFS_ && !defined _SYS_TYPES_H && !defined __SYS_TYPES_H__ && !defined _SYS_BSD_TYPES_H && !defined _LINUX_TYPES_H) || defined(__sparc__)
++#ifndef EXCLUDE_CYGWIN32_TYPES
++ typedef unsigned int uint;
++#endif
++#ifndef _LINUX_TYPES_H
++ typedef unsigned long ulong;
++#endif
++#if !defined(ushort) && !defined(EXCLUDE_CYGWIN32_TYPES) && !defined(__INCvxTypesOldh)
++ typedef unsigned short ushort;
++#endif
++#endif
++#else
++typedef unsigned long ulong;
++#endif
++
++#if defined(GREENHILL) || defined(GNUTX39) /* GH allocates private data to incorrect section */
++#define Private
++#else
++#define Private static
++#endif
++
++#define Public
++
++#ifdef NULL
++#undef NULL
++#endif
++#ifdef nil
++#undef nil
++#endif
++
++#define NULL 0
++#define nil 0
++
++#define false 0
++#define true 1
++typedef unsigned char Boolean;
++typedef unsigned int BitField; /* this must occur BEFORE long_is_int/int_is_long defs */
++
++#ifdef LONG_IS_INT
++#define long int
++#define ulong uint
++#endif
++
++#ifdef INT_IS_LONG
++#define int long
++#define uint ulong
++#endif
++
++#define POSTULATE(postulate) \
++ do \
++ { \
++ typedef struct \
++ { \
++ char NegativeSizeIfPostulateFalse[((int)(postulate))*2 - 1]; \
++ } PostulateCheckStruct; \
++ } \
++ while (0)
++
++#if defined(DEBUG) && !defined(__KERNEL__)
++#ifndef WARN
++#define kDSLNumberWarnTimes 10
++#define WARN(assertion) \
++ { static int warnSeveralTimes=0; \
++ if ((!(assertion))&(warnSeveralTimes<kDSLNumberWarnTimes)) \
++ { \
++ fprintf(stderr, "Warning, failed: %s\n", #assertion); \
++ fprintf(stderr, "%s:%d\n", __FILE__, __LINE__); \
++ warnSeveralTimes++; \
++ } \
++ }
++#endif
++#ifndef ASSERT
++#define ASSERT(assertion) \
++ { if (!(assertion)) \
++ { \
++ fprintf(stderr, "Assertion failed: %s\n", #assertion); \
++ fprintf(stderr, "%s:%d\n", __FILE__, __LINE__); \
++ exit(1); \
++ } \
++ }
++#endif
++#else
++
++#undef WARN
++#define WARN(a)
++
++#undef ASSERT
++#define ASSERT(a)
++
++#endif
++
++/*
++ * memory allocation macros
++ */
++
++#if defined(bcm47xx) && defined(USE_SLOW_DATA)
++#define SLOW_DATA __attribute__ ((section(".slow_data")))
++#else
++#define SLOW_DATA
++#endif
++
++#if defined(bcm47xx) && defined(USE_FAST_TEXT)
++#define FAST_TEXT __attribute__ ((section(".fast_text")))
++#else
++#define FAST_TEXT
++#endif
++
++#if defined(bcm47xx) && defined(SWAP_LMEM)
++#define SWAP_TEXT1_1 __attribute__ ((section(".swap_text1_1")))
++#define SWAP_TEXT1_2 __attribute__ ((section(".swap_text1_2")))
++#define SWAP_TEXT2_1 __attribute__ ((section(".swap_text2_1")))
++#define SWAP_TEXT2_2 __attribute__ ((section(".swap_text2_2")))
++#define SWAP_TEXT3_1 __attribute__ ((section(".swap_text3_1")))
++#define SWAP_TEXT3_2 __attribute__ ((section(".swap_text3_2")))
++#else
++#define SWAP_TEXT1_1 FAST_TEXT
++#define SWAP_TEXT1_2 FAST_TEXT
++#define SWAP_TEXT2_1 FAST_TEXT
++#define SWAP_TEXT2_2 FAST_TEXT
++#define SWAP_TEXT3_1 FAST_TEXT
++#define SWAP_TEXT3_2 FAST_TEXT
++#endif
++
++/*
++ * Debug stuff
++ */
++#if defined(DEBUG) || defined(DEBUG_PTR_ENABLED)
++#define DECLARE_DEBUG_PTR(type) static type *gv;
++#define SETUP_DEBUG_PTR() gv = &globalVar
++#else
++#define DECLARE_DEBUG_PTR(type)
++#define SETUP_DEBUG_PTR()
++#endif
++/*
++ * Obsolete stuff
++ */
++#ifdef DEBUG
++#define HereIsTheGlobalVarPointerMacro SETUP_DEBUG_PTR();
++#else
++#define HereIsTheGlobalVarPointerMacro
++#endif
++#endif
+diff -urN linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/impl1/adslcore6348/adsl_defs.h linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/impl1/adslcore6348/adsl_defs.h
+--- linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/impl1/adslcore6348/adsl_defs.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/impl1/adslcore6348/adsl_defs.h 2006-06-26 09:07:10.000000000 +0200
+@@ -0,0 +1,133 @@
++/* TARGET=bcm6348-dmt-T1-dmtbis-adsl2plus-L2-SRA-firmware-Qproc-HW-RTL-pipeline-IncOneBit-Readsl2-doubleUS */
++
++#define SOURCE_FILE_
++#define BCM6348_SRC
++#define G994_T1P413_1024_FFT
++#define ENABLE_DIG_USPWR_CUTBACK
++#define ADSLCORE_ONLY
++#define TEQ_DF
++#define LOOP_TIMING_PLL
++#define RCV_PHASE_TWEAK_ONLY
++#define ADSL_MAX_POSSIBLE_RCV_RATE
++#define HARDWARE_CHANNEL
++#define ADSL_HARDWARE_AGC
++#define HW_CHANNEL_ADC
++#define HW_CHANNEL_DAC
++#define HW_PGA
++#define DIGITALEC_SINGLE_TAP_UPDATE
++#define ANALOGEC_SINGLE_TAP_UPDATE
++#define HWLOG
++#define G992_TRELLIS_CODE_CLAMPING
++#define G992DECODERTRELLISBOUNDARY
++#define MEMORYLIMIT64K
++#define bcm47xx
++#define DSL_BIG_ENDIAN
++#define MIPS_SRC
++#define VP_INLINE -Winline
++#define USE_ASM_API
++#define RTL_SRC
++#define RSENC_INLINE
++#define BITENC_INLINE
++#define USE_SLOW_DATA
++#define USE_FAST_TEXT
++#define PROFILE_INLINE
++#define CHIP_SRC
++#define G992_RESYNC_PILOT_PHASE_IN_SHOWTIME
++#define G992_APPLY_SSVI
++#define SHARE_TEQ_VARS
++#define ANNEX_M
++#define DOUBLE_UP_STREAM
++#define G994P1_SUPPORT_A43C
++#define USE_ASM_API
++#define MIPS_ASM
++#define MEMORYLIMIT64K
++#define ADSL_FIRMWARE
++#define G992DATA_XMT_COMPACT_WORD
++#define ADSL_MAX_POSSIBLE_RCV_RATE
++#define DSP_FRONTEND_ONLY
++#define G992P3_ONE_BIT_CONSTELLATION
++#define ADSL_MODEM
++#define ATM
++#define ADSL_ATUR
++#define ADSL_SOFTWARE_TIME_ERROR_CALCULATION
++#define DSL_REPORT_ALL_COUNTERS
++#define ADSL_MONITOR_LCD
++#define G994P1
++#define G994P1_ATUR
++#define G992
++#define G992_ATUR
++#define ADSL_FRAMER
++#define G997_1
++#define ATM_I432
++#define TEQ_DF
++#define G992_ATUR_UPSTREAM_SAMPLING_FREQ_276KHZ
++#define G994P1_ATUR_UPSTREAM_SAMPLING_FREQ_276KHZ
++#define G992_TRELLISCODE
++#define ADSL_HARDWARE_ECHO_CANCELLOR
++#define G992P1
++#define G992P1_ATUR
++#define G992P1_ANNEX_A
++#define ADSL_HARDWARE_TIME_ERROR_TRACKING
++#define G992P1_NEWFRAME
++#define G992P1_NEWFRAME_ATUR
++#define G992P1_ANNEX_A_USED_FOR_G992P2
++#define T1P413
++#define G992_ATUR_UPSTREAM_SAMPLING_FREQ_276KHZ
++#define G992_CALC_DEBUG_SNR_BEFORE_TEQ
++#define G992P3
++#define RATE_SELECT_E14
++#define G992P3_ATUR
++#define G992P3AMENDMENT
++#define GLOBESPAN_DM
++#define G992P3_COMB_MSG_THREE_COPIES
++#define G992P3_POWER_MANAGEMENT
++#define G992P3_SRA
++#define G992P5
++#define G992P5_ATUR
++#define ADSL_PIPELINE_CODE
++#define ADSL_HARDWARE_TIME_ERROR_TRACKING
++#define G994P1RCV_QPROC
++#define G994P1XMT_QPROC
++#define G992RCV_QPROC
++#define G992XMT_QPROC
++#define G992RCV_RS
++#define VP_SIMULATOR
++#define T1P413RCV_QPROC
++#define T1P413XMT_QPROC
++#define G992ENC_HW_DATAMODE
++#define G992DATA_XMT_HW_RS
++#define G992DATA_XMT_COMPACT_WORD
++#define G992RCV_QPROC_FAST
++#define G992_BIT_SWAP
++#define ADSL_IDENTIFY_VENDOR_FIRMWARE
++#define ADSL_ATUR_FORCE_BIGGER_UPSTREAM_MARGIN
++#define G992_MORE_FRAME_MODE
++#define XMT_RACT2_FOR_ADI_COMPATIBILITY
++#define XMT_FFT_SIZE_2X
++#define SYNCH_SYMBOL_DETECTION
++#define ANSI_CACT12_PING_PONG
++#define ADSL_SPECIAL_FIX_FOR_FRENCH_TELECOM
++#define G994P1_CHECK_SECURITY
++#define G994P1_NON_STD_INFO
++#define I432_HEADER_COMPRESSION
++#define TDC_IOP_FIX_ERICSSON_TI_4000C_350
++#define TDC_IOP_FIX_SEIMENS_TI
++#define FT_ADI_US_RATE_FIX
++#define ANSI_CACT12_PING_PONG
++#define G992_ATUR_UPSTREAM_SAMPLING_FREQ_276KHZ
++#define G994P1_ATUR_UPSTREAM_SAMPLING_FREQ_276KHZ
++#define READSL2
++#define G992_APPLY_SSVI
++#define READSL2_FILTERS
++
++
++#define ADSL_PHY_XFACE_OFFSET 0x21F90
++
++
++#define ADSL_PHY_SDRAM_BIAS 0x1A0000
++
++
++#define ADSL_PHY_SDRAM_LINK_OFFSET 0x1A0000
++
++
++#define ADSL_PHY_SDRAM_PAGE_SIZE 0x200000
+diff -urN linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/impl1/adslcore6348/adsl_lmem.h linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/impl1/adslcore6348/adsl_lmem.h
+--- linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/impl1/adslcore6348/adsl_lmem.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/impl1/adslcore6348/adsl_lmem.h 2006-06-26 09:07:10.000000000 +0200
+@@ -0,0 +1,6 @@
++/*
++** Don't change!
++** This file has been generated automatically by bin2c program
++*/
++
++extern const unsigned char adsl_lmem[51036];
+diff -urN linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/impl1/adslcore6348/adsl_sdram.h linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/impl1/adslcore6348/adsl_sdram.h
+--- linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/impl1/adslcore6348/adsl_sdram.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/impl1/adslcore6348/adsl_sdram.h 2006-06-26 09:07:10.000000000 +0200
+@@ -0,0 +1,6 @@
++/*
++** Don't change!
++** This file has been generated automatically by bin2c program
++*/
++
++extern const unsigned char adsl_sdram[364348];
+diff -urN linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/impl1/softdsl/AdslCoreDefs.h linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/impl1/softdsl/AdslCoreDefs.h
+--- linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/impl1/softdsl/AdslCoreDefs.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/impl1/softdsl/AdslCoreDefs.h 2006-06-26 09:07:10.000000000 +0200
+@@ -0,0 +1,245 @@
++/*
++<:copyright-broadcom
++
++ Copyright (c) 2002 Broadcom Corporation
++ All Rights Reserved
++ No portions of this material may be reproduced in any form without the
++ written permission of:
++ Broadcom Corporation
++ 16215 Alton Parkway
++ Irvine, California 92619
++ All information contained in this document is Broadcom Corporation
++ company private, proprietary, and trade secret.
++
++:>
++*/
++/****************************************************************************
++ *
++ * AdslCore.c -- Bcm ADSL core driver
++ *
++ * Description:
++ * This file contains BCM ADSL core driver
++ *
++ *
++ * Copyright (c) 2000-2001 Broadcom Corporation
++ * All Rights Reserved
++ * No portions of this material may be reproduced in any form without the
++ * written permission of:
++ * Broadcom Corporation
++ * 16215 Alton Parkway
++ * Irvine, California 92619
++ * All information contained in this document is Broadcom Corporation
++ * company private, proprietary, and trade secret.
++ * Authors: Ilya Stomakhin
++ *
++ * $Revision: 1.4 $
++ *
++ * $Id: AdslCoreDefs.h,v 1.4 2004/07/20 23:45:48 ilyas Exp $
++ *
++ * $Log: AdslCoreDefs.h,v $
++ * Revision 1.4 2004/07/20 23:45:48 ilyas
++ * Added driver version info, SoftDslPrintf support. Fixed G.997 related issues
++ *
++ * Revision 1.3 2004/06/10 00:20:33 ilyas
++ * Added L2/L3 and SRA
++ *
++ * Revision 1.2 2004/04/12 23:24:38 ilyas
++ * Added default G992P5 PHY definition
++ *
++ * Revision 1.1 2004/04/08 23:59:15 ilyas
++ * Initial CVS checkin
++ *
++ ****************************************************************************/
++
++#ifndef _ADSL_CORE_DEFS_H
++#define _ADSL_CORE_DEFS_H
++
++#if defined(__KERNEL__)
++#include <linux/config.h>
++#endif
++
++#if defined(CONFIG_BCM96348) || defined(BOARD_bcm96348) || defined(_BCM96348_) || defined(CONFIG_BCM96338) || defined(BOARD_bcm96338) || defined(_BCM96338_)
++#ifdef ADSL_ANNEXC
++#include "../adslcore6348C/adsl_defs.h"
++#elif defined(ADSL_ANNEXB)
++#include "../adslcore6348B/adsl_defs.h"
++#elif defined(ADSL_SADSL)
++#include "../adslcore6348SA/adsl_defs.h"
++#else
++#include "../adslcore6348/adsl_defs.h"
++#endif
++#endif
++
++#if defined(__KERNEL__) || defined(TARG_OS_RTEMS) || defined(_CFE_)
++#if defined(CONFIG_BCM96345) || defined(BOARD_bcm96345) || defined(_BCM96345_)
++#ifdef ADSL_ANNEXC
++#include "../adslcore6345C/adsl_defs.h"
++#elif defined(ADSL_ANNEXB)
++#include "../adslcore6345B/adsl_defs.h"
++#elif defined(ADSL_SADSL)
++#include "../adslcore6345SA/adsl_defs.h"
++#else
++#include "../adslcore6345/adsl_defs.h"
++#endif
++#endif /* of CONFIG_BCM96345 */
++#else
++#if defined(CONFIG_BCM96345)
++#ifdef ADSL_ANNEXC
++#include "../adslcoreC/adsl_defs.h"
++#elif defined(ADSL_ANNEXB)
++#include "../adslcoreB/adsl_defs.h"
++#elif defined(ADSL_SADSL)
++#include "../adslcoreSA/adsl_defs.h"
++#else
++#include "../adslcore/adsl_defs.h"
++#endif
++#endif /* of CONFIG_BCM96345 */
++#endif /* __KERNEL__ */
++
++#ifdef _WIN32_WCE
++#define ASSERT(a)
++#endif
++
++#include "AdslXfaceData.h"
++
++/* adjust some definitions for the HOST */
++
++#undef GLOBAL_PTR_BIAS
++#undef ADSLCORE_ONLY
++#undef USE_SLOW_DATA
++#undef USE_FAST_TEXT
++#undef VP_SIMULATOR
++#undef bcm47xx
++#undef ADSL_FRAMER
++#undef ATM
++#undef ATM_I432
++#undef DSL_OS
++
++#define HOST_ONLY
++#define G997_1_FRAMER
++#define ADSL_MIB
++
++#ifndef FLATTEN_ADDR_ADJUST
++#define FLATTEN_ADDR_ADJUST 0xFFF00000
++#endif
++
++/* definitions for combo PHY (AnnexA(ADSL2) and AnnexB) */
++
++#if !(defined(ADSL_SINGLE_PHY) || defined(G992_ANNEXC))
++
++#undef G992P1_ANNEX_A
++#define G992P1_ANNEX_A
++#undef G992P3
++#define G992P3
++#undef G992P5
++#define G992P5
++#define G992P1_ANNEX_A
++#undef READSL2
++#define READSL2
++#undef G992P1_ANNEX_A_USED_FOR_G992P2
++#define G992P1_ANNEX_A_USED_FOR_G992P2
++#undef T1P413
++#define T1P413
++
++#undef G992P1_ANNEX_B
++#define G992P1_ANNEX_B
++
++#endif
++
++/* ADSL PHY definition */
++
++typedef struct {
++ unsigned long sdramPageAddr;
++ unsigned long sdramImageAddr;
++ unsigned long sdramImageSize;
++ unsigned long sdramPhyImageAddr;
++ unsigned short fwType;
++ unsigned short chipType;
++ unsigned short mjVerNum;
++ unsigned short mnVerNum;
++ char *pVerStr;
++ unsigned long features[4];
++} adslPhyInfo;
++extern adslPhyInfo adslCorePhyDesc;
++
++/* chip list */
++
++#define kAdslPhyChipMjMask 0xFF00
++#define kAdslPhyChipMnMask 0x00FF
++#define kAdslPhyChipUnknown 0
++#define kAdslPhyChip6345 0x100
++#define kAdslPhyChip6348 0x200
++#define kAdslPhyChipRev0 0
++#define kAdslPhyChipRev1 1
++#define kAdslPhyChipRev2 2
++#define kAdslPhyChipRev3 3
++#define kAdslPhyChipRev4 4
++#define kAdslPhyChipRev5 5
++
++#define ADSL_PHY_SUPPORT(f) AdslFeatureSupported(adslCorePhyDesc.features,f)
++#define ADSL_PHY_SET_SUPPORT(p,f) AdslFeatureSet((p)->features,f)
++
++/* ADSL Driver to/from PHY address and data conversion macros */
++
++#ifdef ADSLDRV_LITTLE_ENDIAN
++#define ADSL_ENDIAN_CONV_LONG(x) ( ((x) << 24) | (((x) << 8) & 0x00FF0000) | (((x) >> 8) & 0x0000FF00) | ((unsigned long)(x) >> 24) )
++#define ADSL_ENDIAN_CONV_SHORT(x) ( ((x) << 8) | ((unsigned short)(x) >> 8) )
++#define ADSL_ENDIAN_CONV_2SHORTS(x) ( ((x) << 16) | ((unsigned long)(x) >> 16) )
++#else
++#define ADSL_ENDIAN_CONV_LONG(x) x
++#define ADSL_ENDIAN_CONV_SHORT(x) x
++#define ADSL_ENDIAN_CONV_2SHORTS(x) x
++#endif
++
++#ifndef ADSL_PHY_XFACE_OFFSET
++#define ADSL_PHY_XFACE_OFFSET 0x00017F90
++#endif
++#define ADSL_LMEM_XFACE_DATA (0xFFF00000 | ADSL_PHY_XFACE_OFFSET)
++
++#ifndef ADSL_PHY_SDRAM_START
++#define ADSL_PHY_SDRAM_START 0x10000000
++#endif
++#ifndef ADSL_PHY_SDRAM_BIAS
++#define ADSL_PHY_SDRAM_BIAS 0x00040000
++#endif
++#define ADSL_PHY_SDRAM_START_4 (ADSL_PHY_SDRAM_START + ADSL_PHY_SDRAM_BIAS)
++
++#ifndef ADSL_PHY_SDRAM_PAGE_SIZE
++#define ADSL_PHY_SDRAM_PAGE_SIZE 0x00080000
++#endif
++
++#ifdef ADSL_PHY_SDRAM_BIAS
++#define ADSL_SDRAM_IMAGE_SIZE (ADSL_PHY_SDRAM_PAGE_SIZE - ADSL_PHY_SDRAM_BIAS)
++#else
++#define ADSL_SDRAM_IMAGE_SIZE (256*1024)
++#endif
++
++
++#ifndef ADSL_PHY_SDRAM_LINK_OFFSET
++#define ADSL_PHY_SDRAM_LINK_OFFSET 0x00040000
++#endif
++
++#define ADSL_SDRAM_TOTAL_SIZE 0x00800000
++#define ADSL_SDRAM_HOST_MIPS_DEFAULT (0xA0000000 | (ADSL_SDRAM_TOTAL_SIZE - ADSL_PHY_SDRAM_PAGE_SIZE + ADSL_PHY_SDRAM_BIAS))
++
++#define ADSLXF ((AdslXfaceData *) ADSL_LMEM_XFACE_DATA)
++
++#define ADSL_MIPS_LMEM_ADDR(a) (((ulong)(a) & 0x19000000) == 0x19000000)
++#define SDRAM_ADDR_TO_HOST(a) ((void *) ((ulong)(a) - adslCorePhyDesc.sdramPhyImageAddr + \
++ (ADSLXF->sdramBaseAddr ? (unsigned long) ADSLXF->sdramBaseAddr : ADSL_SDRAM_HOST_MIPS_DEFAULT)))
++#define SDRAM_ADDR_TO_ADSL(a) ((void *) (adslCorePhyDesc.sdramPhyImageAddr + ((ulong)(a) - \
++ (ADSLXF->sdramBaseAddr ? (unsigned long) ADSLXF->sdramBaseAddr : ADSL_SDRAM_HOST_MIPS_DEFAULT))))
++
++#define ADSL_ADDR_TO_HOST(addr) ADSL_MIPS_LMEM_ADDR(addr) ? (void *) ((ulong) (addr) | FLATTEN_ADDR_ADJUST) : SDRAM_ADDR_TO_HOST(addr)
++
++
++#ifndef DEBUG
++#define DEBUG
++#endif
++
++#ifndef __SoftDslPrintf
++void __SoftDslPrintf(void *gDslVars, char *fmt, int argNum, ...);
++#endif
++
++#endif
++
+diff -urN linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/impl1/softdsl/AdslMib.gh linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/impl1/softdsl/AdslMib.gh
+--- linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/impl1/softdsl/AdslMib.gh 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/impl1/softdsl/AdslMib.gh 2006-06-26 09:07:10.000000000 +0200
+@@ -0,0 +1,94 @@
++/****************************************************************************
++ *
++ * AdslMib.gh
++ *
++ * Description:
++ * This is a header file which defines the type for AdslMib
++ * global variable structure.
++ *
++ *
++ * Copyright (c) 1993-1998 AltoCom, Inc. All rights reserved.
++ * Authors: Ilya Stomakhin
++ *
++ * $Revision: 1.8 $
++ *
++ * $Id: AdslMib.gh,v 1.8 2004/06/04 18:56:01 ilyas Exp $
++ *
++ * $Log: AdslMib.gh,v $
++ * Revision 1.8 2004/06/04 18:56:01 ilyas
++ * Added counter for ADSL2 framing and performance
++ *
++ * Revision 1.7 2003/10/17 21:02:12 ilyas
++ * Added more data for ADSL2
++ *
++ * Revision 1.6 2003/10/14 00:55:27 ilyas
++ * Added UAS, LOSS, SES error seconds counters.
++ * Support for 512 tones (AnnexI)
++ *
++ * Revision 1.5 2003/07/18 19:07:15 ilyas
++ * Merged with ADSL driver
++ *
++ * Revision 1.4 2002/11/13 21:32:49 ilyas
++ * Added adjustK support for Centillium non-standard framing mode
++ *
++ * Revision 1.3 2002/10/31 20:27:13 ilyas
++ * Merged with the latest changes for VxWorks/Linux driver
++ *
++ * Revision 1.2 2002/07/20 00:51:41 ilyas
++ * Merged witchanges made for VxWorks/Linux driver.
++ *
++ * Revision 1.1 2001/12/21 22:39:30 ilyas
++ * Added support for ADSL MIB data objects (RFC2662)
++ *
++ *
++ *****************************************************************************/
++
++#ifndef AdslMibGlobals
++#define AdslMibGlobals
++
++#include "AdslMib.h"
++
++typedef struct
++ {
++ /* MIB data */
++
++ adslMibInfo adslMib;
++
++ /* ADSL state data */
++
++ adslMibNotifyHandlerType notifyHandlerPtr;
++ ulong timeSec;
++ ulong timeMs;
++ Boolean currSecondErrored;
++ Boolean currSecondLOS;
++ Boolean currSecondSES;
++ Boolean currSecondFEC;
++ ulong rcvPower;
++ ulong rcvRateBps;
++ ulong xmtRateBps;
++ ulong linkStatus;
++ G992CodingParams rcvParams;
++ G992CodingParams xmtParams;
++ ulong shtCounters[kG992ShowtimeNumOfMonitorCounters];
++ ulong scratchData;
++ long showtimeMarginThld;
++
++ /* ADSL diag data */
++
++ short snr[kAdslMibMaxToneNum];
++ short showtimeMargin[kAdslMibMaxToneNum];
++ uchar bitAlloc[kAdslMibMaxToneNum];
++ short gain[kAdslMibMaxToneNum];
++ ComplexShort chanCharLin[kAdslMibMaxToneNum];
++ short chanCharLog[kAdslMibMaxToneNum];
++ short quietLineNoise[kAdslMibMaxToneNum];
++
++ ushort nTones;
++ uchar nMsgCnt;
++ ulong g992MsgType;
++ uchar rsOption[1+4];
++ Boolean rsOptionValid;
++ }
++ adslMibVarsStruct;
++
++#endif /* AdslMibGlobals */
+diff -urN linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/impl1/softdsl/AdslMib.h linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/impl1/softdsl/AdslMib.h
+--- linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/impl1/softdsl/AdslMib.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/impl1/softdsl/AdslMib.h 2006-06-26 09:07:10.000000000 +0200
+@@ -0,0 +1,114 @@
++/*
++<:copyright-broadcom
++
++ Copyright (c) 2002 Broadcom Corporation
++ All Rights Reserved
++ No portions of this material may be reproduced in any form without the
++ written permission of:
++ Broadcom Corporation
++ 16215 Alton Parkway
++ Irvine, California 92619
++ All information contained in this document is Broadcom Corporation
++ company private, proprietary, and trade secret.
++
++:>
++*/
++/****************************************************************************
++ *
++ * AdslMib.h
++ *
++ * Description:
++ * This file contains the exported functions and definitions for AdslMib
++ *
++ *
++ * Copyright (c) 1993-1998 AltoCom, Inc. All rights reserved.
++ * Authors: Ilya Stomakhin
++ *
++ * $Revision: 1.9 $
++ *
++ * $Id: AdslMib.h,v 1.9 2004/04/12 23:34:52 ilyas Exp $
++ *
++ * $Log: AdslMib.h,v $
++ * Revision 1.9 2004/04/12 23:34:52 ilyas
++ * Merged the latest ADSL driver chnages for ADSL2+
++ *
++ * Revision 1.8 2004/03/03 20:14:05 ilyas
++ * Merged changes for ADSL2+ from ADSL driver
++ *
++ * Revision 1.7 2003/10/14 00:55:27 ilyas
++ * Added UAS, LOSS, SES error seconds counters.
++ * Support for 512 tones (AnnexI)
++ *
++ * Revision 1.6 2003/07/18 19:07:15 ilyas
++ * Merged with ADSL driver
++ *
++ * Revision 1.5 2002/10/31 20:27:13 ilyas
++ * Merged with the latest changes for VxWorks/Linux driver
++ *
++ * Revision 1.4 2002/07/20 00:51:41 ilyas
++ * Merged witchanges made for VxWorks/Linux driver.
++ *
++ * Revision 1.3 2002/01/13 22:25:40 ilyas
++ * Added functions to get channels rate
++ *
++ * Revision 1.2 2002/01/03 06:03:36 ilyas
++ * Handle byte moves tha are not multiple of 2
++ *
++ * Revision 1.1 2001/12/21 22:39:30 ilyas
++ * Added support for ADSL MIB data objects (RFC2662)
++ *
++ *
++ *****************************************************************************/
++
++#ifndef AdslMibHeader
++#define AdslMibHeader
++
++#if defined(_CFE_)
++#include "lib_types.h"
++#include "lib_string.h"
++#endif
++
++#include "AdslMibDef.h"
++
++/* Interface functions */
++
++typedef int (SM_DECL *adslMibNotifyHandlerType) (void *gDslVars, ulong event);
++
++extern Boolean AdslMibInit(void *gDslVars);
++extern void AdslMibTimer(void *gDslVars, long timeMs);
++extern void AdslMibStatusSnooper (void *gDslVars, dslStatusStruct *status);
++extern void AdslMibSetNotifyHandler(void *gDslVars, adslMibNotifyHandlerType notifyHandlerPtr);
++extern int AdslMibGetModulationType(void *gDslVars);
++extern Boolean AdslMibIsAdsl2Mod(void *gDslVars);
++extern int AdslMibGetActiveChannel(void *gDslVars);
++extern int AdslMibGetGetChannelRate(void *gDslVars, int dir, int channel);
++extern Boolean AdslMibIsLinkActive(void *gDslVars);
++extern int AdslMibPowerState(void *gDslVars);
++extern int AdslMibTrainingState (void *gDslVars);
++extern void AdslMibClearData(void *gDslVars);
++extern void AdslMibClearBertResults(void *gDslVars);
++extern void AdslMibBertStartEx(void *gDslVars, ulong bertSec);
++extern void AdslMibBertStopEx(void *gDslVars);
++extern ulong AdslMibBertContinueEx(void *gDslVars, ulong totalBits, ulong errBits);
++extern void AdslMibSetLPR(void *gDslVars);
++extern void AdslMibSetShowtimeMargin(void *gDslVars, long showtimeMargin);
++extern void AdslMibResetConectionStatCounters(void *gDslVars);
++
++extern void AdslMibByteMove (int size, void* srcPtr, void* dstPtr);
++extern void AdslMibByteClear(int size, void* dstPtr);
++extern int AdslMibStrCopy(char *srcPtr, char *dstPtr);
++
++/* AdslMibGetData dataId codes */
++
++#define kAdslMibDataAll 0
++
++extern void *AdslMibGetData (void *gDslVars, int dataId, void *pAdslMibData);
++
++extern int AdslMibGetObjectValue (
++ void *gDslVars,
++ uchar *objId,
++ int objIdLen,
++ uchar *dataBuf,
++ ulong *dataBufLen);
++
++#endif /* AdslMibHeader */
+diff -urN linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/impl1/softdsl/AdslMibOid.h linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/impl1/softdsl/AdslMibOid.h
+--- linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/impl1/softdsl/AdslMibOid.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/impl1/softdsl/AdslMibOid.h 2006-06-26 09:07:10.000000000 +0200
+@@ -0,0 +1,177 @@
++/*
++<:copyright-broadcom
++
++ Copyright (c) 2002 Broadcom Corporation
++ All Rights Reserved
++ No portions of this material may be reproduced in any form without the
++ written permission of:
++ Broadcom Corporation
++ 16215 Alton Parkway
++ Irvine, California 92619
++ All information contained in this document is Broadcom Corporation
++ company private, proprietary, and trade secret.
++
++:>
++*/
++/****************************************************************************
++ *
++ * AdslMibOid.h
++ *
++ * Description:
++ * SNMP object identifiers for ADSL MIB and other related MIBs
++ *
++ * Copyright (c) 1993-1998 AltoCom, Inc. All rights reserved.
++ * Authors: Ilya Stomakhin
++ *
++ * $Revision: 1.5 $
++ *
++ * $Id: AdslMibOid.h,v 1.5 2004/06/04 18:56:01 ilyas Exp $
++ *
++ * $Log: AdslMibOid.h,v $
++ * Revision 1.5 2004/06/04 18:56:01 ilyas
++ * Added counter for ADSL2 framing and performance
++ *
++ * Revision 1.4 2003/10/17 21:02:12 ilyas
++ * Added more data for ADSL2
++ *
++ * Revision 1.3 2003/10/14 00:55:27 ilyas
++ * Added UAS, LOSS, SES error seconds counters.
++ * Support for 512 tones (AnnexI)
++ *
++ * Revision 1.2 2002/07/20 00:51:41 ilyas
++ * Merged witchanges made for VxWorks/Linux driver.
++ *
++ * Revision 1.1 2001/12/21 22:39:30 ilyas
++ * Added support for ADSL MIB data objects (RFC2662)
++ *
++ *
++ *****************************************************************************/
++
++#ifndef AdslMibOidHeader
++#define AdslMibOidHeader
++
++#define kOidAdsl 94
++#define kOidAdslInterleave 124
++#define kOidAdslFast 125
++#define kOidAtm 37
++
++#define kOidAdslLine 1
++#define kOidAdslMibObjects 1
++
++#define kOidAdslLineTable 1
++#define kOidAdslLineEntry 1
++#define kOidAdslLineCoding 1
++#define kOidAdslLineType 2
++#define kOidAdslLineSpecific 3
++#define kOidAdslLineConfProfile 4
++#define kOidAdslLineAlarmConfProfile 5
++
++#define kOidAdslAtucPhysTable 2
++#define kOidAdslAturPhysTable 3
++#define kOidAdslPhysEntry 1
++#define kOidAdslPhysInvSerialNumber 1
++#define kOidAdslPhysInvVendorID 2
++#define kOidAdslPhysInvVersionNumber 3
++#define kOidAdslPhysCurrSnrMgn 4
++#define kOidAdslPhysCurrAtn 5
++#define kOidAdslPhysCurrStatus 6
++#define kOidAdslPhysCurrOutputPwr 7
++#define kOidAdslPhysCurrAttainableRate 8
++
++#define kOidAdslAtucChanTable 4
++#define kOidAdslAturChanTable 5
++#define kOidAdslChanEntry 1
++#define kOidAdslChanInterleaveDelay 1
++#define kOidAdslChanCurrTxRate 2
++#define kOidAdslChanPrevTxRate 3
++#define kOidAdslChanCrcBlockLength 4
++
++#define kOidAdslAtucPerfDataTable 6
++#define kOidAdslAturPerfDataTable 7
++#define kOidAdslPerfDataEntry 1
++#define kOidAdslPerfLofs 1
++#define kOidAdslPerfLoss 2
++#define kOidAdslPerfLprs 3
++#define kOidAdslPerfESs 4
++#define kOidAdslPerfValidIntervals 5
++#define kOidAdslPerfInvalidIntervals 6
++#define kOidAdslPerfCurr15MinTimeElapsed 7
++#define kOidAdslPerfCurr15MinLofs 8
++#define kOidAdslPerfCurr15MinLoss 9
++#define kOidAdslPerfCurr15MinLprs 10
++#define kOidAdslPerfCurr15MinESs 11
++#define kOidAdslPerfCurr1DayTimeElapsed 12
++#define kOidAdslPerfCurr1DayLofs 13
++#define kOidAdslPerfCurr1DayLoss 14
++#define kOidAdslPerfCurr1DayLprs 15
++#define kOidAdslPerfCurr1DayESs 16
++#define kOidAdslPerfPrev1DayMoniSecs 17
++#define kOidAdslPerfPrev1DayLofs 18
++#define kOidAdslPerfPrev1DayLoss 19
++#define kOidAdslPerfPrev1DayLprs 20
++#define kOidAdslPerfPrev1DayESs 21
++
++#define kOidAdslAtucPerfIntervalTable 8
++#define kOidAdslAturPerfIntervalTable 9
++#define kOidAdslPerfIntervalEntry 1
++#define kOidAdslIntervalNumber 1
++#define kOidAdslIntervalLofs 2
++#define kOidAdslIntervalLoss 3
++#define kOidAdslIntervalLprs 4
++#define kOidAdslIntervalESs 5
++#define kOidAdslIntervalValidData 6
++
++#define kOidAdslAtucChanPerfTable 10
++#define kOidAdslAturChanPerfTable 11
++#define kOidAdslChanPerfEntry 1
++#define kOidAdslChanReceivedBlks 1
++#define kOidAdslChanTransmittedBlks 2
++#define kOidAdslChanCorrectedBlks 3
++#define kOidAdslChanUncorrectBlks 4
++#define kOidAdslChanPerfValidIntervals 5
++#define kOidAdslChanPerfInvalidIntervals 6
++#define kOidAdslChanPerfCurr15MinTimeElapsed 7
++#define kOidAdslChanPerfCurr15MinReceivedBlks 8
++#define kOidAdslChanPerfCurr15MinTransmittedBlks 9
++#define kOidAdslChanPerfCurr15MinCorrectedBlks 10
++#define kOidAdslChanPerfCurr15MinUncorrectBlks 11
++#define kOidAdslChanPerfCurr1DayTimeElapsed 12
++#define kOidAdslChanPerfCurr1DayReceivedBlks 13
++#define kOidAdslChanPerfCurr1DayTransmittedBlks 14
++#define kOidAdslChanPerfCurr1DayCorrectedBlks 15
++#define kOidAdslChanPerfCurr1DayUncorrectBlks 16
++#define kOidAdslChanPerfPrev1DayMoniSecs 17
++#define kOidAdslChanPerfPrev1DayReceivedBlks 18
++#define kOidAdslChanPerfPrev1DayTransmittedBlks 19
++#define kOidAdslChanPerfPrev1DayCorrectedBlks 20
++#define kOidAdslChanPerfPrev1DayUncorrectBlks 21
++
++#define kOidAdslAtucChanIntervalTable 12
++#define kOidAdslAturChanIntervalTable 13
++#define kOidAdslChanIntervalEntry 1
++#define kOidAdslChanIntervalNumber 1
++#define kOidAdslChanIntervalReceivedBlks 2
++#define kOidAdslChanIntervalTransmittedBlks 3
++#define kOidAdslChanIntervalCorrectedBlks 4
++#define kOidAdslChanIntervalUncorrectBlks 5
++#define kOidAdslChanIntervalValidData 6
++
++/* AdslExtra OIDs for kOidAdslPrivate, kOidAdslPrivExtraInfo (defined in AdslMibDef.h) */
++
++#define kOidAdslExtraConnectionInfo 1
++#define kOidAdslExtraConnectionStat 2
++#define kOidAdslExtraFramingMode 3
++#define kOidAdslExtraTrainingState 4
++#define kOidAdslExtraNonStdFramingAdjustK 5
++#define kOidAdslExtraAtmStat 6
++#define kOidAdslExtraDiagModeData 7
++#define kOidAdslExtraAdsl2Info 8
++#define kOidAdslExtraTxPerfCounterInfo 9
++
++#define kOidAtmMibObjects 1
++#define kOidAtmTcTable 4
++#define kOidAtmTcEntry 1
++#define kOidAtmOcdEvents 1
++#define kOidAtmAlarmState 2
++
++#endif /* AdslMibOidHeader */
+diff -urN linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/impl1/softdsl/AdslXfaceData.h linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/impl1/softdsl/AdslXfaceData.h
+--- linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/impl1/softdsl/AdslXfaceData.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/impl1/softdsl/AdslXfaceData.h 2006-06-26 09:07:10.000000000 +0200
+@@ -0,0 +1,129 @@
++/*
++<:copyright-broadcom
++
++ Copyright (c) 2002 Broadcom Corporation
++ All Rights Reserved
++ No portions of this material may be reproduced in any form without the
++ written permission of:
++ Broadcom Corporation
++ 16215 Alton Parkway
++ Irvine, California 92619
++ All information contained in this document is Broadcom Corporation
++ company private, proprietary, and trade secret.
++
++:>
++*/
++/****************************************************************************
++ *
++ * AdslXfaceData.h -- ADSL Core interface data structure
++ *
++ * Description:
++ * To be included both in SoftDsl and BcmAdslCore driver
++ *
++ *
++ * Copyright (c) 2000-2001 Broadcom Corporation
++ * All Rights Reserved
++ * No portions of this material may be reproduced in any form without the
++ * written permission of:
++ * Broadcom Corporation
++ * 16215 Alton Parkway
++ * Irvine, California 92619
++ * All information contained in this document is Broadcom Corporation
++ * company private, proprietary, and trade secret.
++ * Authors: Ilya Stomakhin
++ *
++ * $Revision: 1.9 $
++ *
++ * $Id: AdslXfaceData.h,v 1.9 2004/02/03 02:57:22 ilyas Exp $
++ *
++ * $Log: AdslXfaceData.h,v $
++ * Revision 1.9 2004/02/03 02:57:22 ilyas
++ * Added PHY feature settings
++ *
++ * Revision 1.8 2003/07/18 04:50:21 ilyas
++ * Added shared buffer for clEoc messages to avoid copying thru command buffer
++ *
++ * Revision 1.7 2003/02/25 00:46:32 ilyas
++ * Added T1.413 EOC vendor ID
++ *
++ * Revision 1.6 2003/02/21 23:29:13 ilyas
++ * Added OEM vendor ID parameter for T1.413 mode
++ *
++ * Revision 1.5 2002/09/13 21:17:12 ilyas
++ * Added pointers to version and build string to OEM interface structure
++ *
++ * Revision 1.4 2002/09/07 04:16:29 ilyas
++ * Fixed HOST to ADSL MIPS SDRAM address translation for relocatable images
++ *
++ * Revision 1.3 2002/09/07 01:43:59 ilyas
++ * Added support for OEM parameters
++ *
++ * Revision 1.2 2002/01/22 19:03:10 khp
++ * -put sdramBaseAddr at end of Xface struct
++ *
++ * Revision 1.1 2002/01/15 06:25:08 ilyas
++ * Initial implementation of ADSL core firmware
++ *
++ ****************************************************************************/
++
++#ifndef AdslXfaceDataHeader
++#define AdslXfaceDataHeader
++
++#include "CircBuf.h"
++
++typedef struct _AdslXfaceData {
++ stretchBufferStruct sbSta;
++ stretchBufferStruct sbCmd;
++ unsigned long gfcTable[15];
++ void *sdramBaseAddr;
++} AdslXfaceData;
++
++/* Shared SDRAM configuration data */
++
++#define kAdslOemVendorIdMaxSize 8
++#define kAdslOemVersionMaxSize 32
++#define kAdslOemSerNumMaxSize 32
++#define kAdslOemNonStdInfoMaxSize 64
++
++typedef struct _AdslOemSharedData {
++ unsigned long g994VendorIdLen;
++ unsigned long g994XmtNonStdInfoLen;
++ unsigned long g994RcvNonStdInfoLen;
++ unsigned long eocVendorIdLen;
++ unsigned long eocVersionLen;
++ unsigned long eocSerNumLen;
++ unsigned char g994VendorId[kAdslOemVendorIdMaxSize];
++ unsigned char eocVendorId[kAdslOemVendorIdMaxSize];
++ unsigned char eocVersion[kAdslOemVersionMaxSize];
++ unsigned char eocSerNum[kAdslOemSerNumMaxSize];
++ unsigned char g994XmtNonStdInfo[kAdslOemNonStdInfoMaxSize];
++ unsigned char g994RcvNonStdInfo[kAdslOemNonStdInfoMaxSize];
++ char *gDslVerionStringPtr;
++ char *gDslBuildDataStringPtr;
++ unsigned long t1413VendorIdLen;
++ unsigned char t1413VendorId[kAdslOemVendorIdMaxSize];
++ unsigned long t1413EocVendorIdLen;
++ unsigned char t1413EocVendorId[kAdslOemVendorIdMaxSize];
++ unsigned long clEocBufLen;
++ unsigned char *clEocBufPtr;
++} AdslOemSharedData;
++
++/* feature list */
++
++#define kAdslPhyAnnexA 0
++#define kAdslPhyAnnexB 1
++#define kAdslPhyAnnexC 2
++#define kAdslPhySADSL 3
++#define kAdslPhyAdsl2 4
++#define kAdslPhyAdslG992p3 4
++#define kAdslPhyAdsl2p 5
++#define kAdslPhyAdslG992p5 5
++#define kAdslPhyAnnexI 6
++#define kAdslPhyAdslReAdsl2 7
++#define kAdslPhyG992p2Init 8
++#define kAdslPhyT1P413 9
++
++#define AdslFeatureSupported(fa,f) ((fa)[(f) >> 5] & (1 << ((f) & 0x1F)))
++#define AdslFeatureSet(fa,f) (fa)[(f) >> 5] |= (1 << ((f) & 0x1F))
++
++#endif /* AdslXfaceDataHeader */
+diff -urN linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/impl1/softdsl/BlankList.h linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/impl1/softdsl/BlankList.h
+--- linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/impl1/softdsl/BlankList.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/impl1/softdsl/BlankList.h 2006-06-26 09:07:10.000000000 +0200
+@@ -0,0 +1,87 @@
++/*
++<:copyright-broadcom
++
++ Copyright (c) 2002 Broadcom Corporation
++ All Rights Reserved
++ No portions of this material may be reproduced in any form without the
++ written permission of:
++ Broadcom Corporation
++ 16215 Alton Parkway
++ Irvine, California 92619
++ All information contained in this document is Broadcom Corporation
++ company private, proprietary, and trade secret.
++
++:>
++*/
++/****************************************************************************
++ *
++ * BlankList.h
++ *
++ * Description:
++ * Definition and implementation (via macros and inline functions)
++ * of blank list - list of unused items of any size (not less than
++ * sizeof(void *)
++ *
++ * Copyright (c) 1993-1998 AltoCom, Inc. All rights reserved.
++ * Authors: Ilya Stomakhin
++ *
++ *****************************************************************************/
++
++#ifndef BlankListHeader
++#define BlankListHeader
++
++#define BlankListPeek(head) ((void *) (head))
++#define BlankListNext(p) (*(void **) (p))
++
++#define BlankListAdd(pHead,p) do { \
++ BlankListNext(p) = BlankListNext(pHead); \
++ BlankListNext(pHead) = (void *) (p); \
++} while (0)
++
++#define BlankListAddList(pHead,pFirst,pLast) do { \
++ if (NULL != (pLast)) { \
++ BlankListNext(pLast) = BlankListNext(pHead); \
++ BlankListNext(pHead) = (void *) (pFirst); \
++ } \
++} while (0)
++
++#define BlankListGet(pHead) \
++ BlankListNext(pHead); \
++ { \
++ void **__p; \
++ __p = (void **) BlankListNext(pHead); \
++ if (NULL != __p) \
++ BlankListNext(pHead) = *__p; \
++ }
++
++
++#define BlankListForEach(pHead,f,ref) do { \
++ void *p = BlankListNext(pHead); \
++ \
++ while (NULL != p) { \
++ if ( (f)((p), ref) ) break; \
++ p = BlankListNext(p); \
++ } \
++} while (0)
++
++
++#include "Que.h"
++
++#define BlankListAddQue(pHead,pqHdr) do { \
++ if (NULL != ((QueHeader *)(pqHdr))->tail) { \
++ BlankListNext(((QueHeader *)(pqHdr))->tail) = BlankListNext(pHead); \
++ BlankListNext(pHead) = ((QueHeader *)(pqHdr))->head; \
++ } \
++} while (0)
++
++#include "DList.h"
++
++#define BlankListAddDList(pHead,pDListHead) do { \
++ if (!DListEmpty(pDListHead)) { \
++ BlankListNext(DListLast(pDListHead)) = BlankListNext(pHead); \
++ BlankListNext(pHead) = DListFirst(pDListHead); \
++ } \
++} while (0)
++
++#endif /* BlankListHeader */
++
+diff -urN linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/impl1/softdsl/BlockUtil.h linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/impl1/softdsl/BlockUtil.h
+--- linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/impl1/softdsl/BlockUtil.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/impl1/softdsl/BlockUtil.h 2006-06-26 09:07:10.000000000 +0200
+@@ -0,0 +1,235 @@
++/*
++<:copyright-broadcom
++
++ Copyright (c) 2002 Broadcom Corporation
++ All Rights Reserved
++ No portions of this material may be reproduced in any form without the
++ written permission of:
++ Broadcom Corporation
++ 16215 Alton Parkway
++ Irvine, California 92619
++ All information contained in this document is Broadcom Corporation
++ company private, proprietary, and trade secret.
++
++:>
++*/
++/* BlockUtil.h
++ *
++ * Description:
++ * This file contains the interfaces for the fixed point block
++ * processing utilities.
++ *
++ * Copyright (c) 1993-1998 AltoCom, Inc. All rights reserved.
++ * Authors: Mark Gonikberg, Haixiang Liang.
++ *
++ * $Revision: 1.23 $
++ *
++ * $Id: BlockUtil.h,v 1.23 2004/04/13 00:31:10 ilyas Exp $
++ *
++ * $Log: BlockUtil.h,v $
++ * Revision 1.23 2004/04/13 00:31:10 ilyas
++ * Added standard header for shared ADSL driver files
++ *
++ * Revision 1.22 2003/07/11 01:49:01 gsyu
++ * Added BlockShortClearByLong to speed up performance
++ *
++ * Revision 1.21 2003/07/10 22:35:23 gsyu
++ * Speed up BlockByteXXX performance
++ *
++ * Revision 1.20 2003/07/10 22:15:51 gsyu
++ * Added BlockByteMoveByWord to speed up performance
++ *
++ * Revision 1.19 2002/03/12 00:03:03 yongbing
++ * Modify cplxScaleCplxSymbols to accept a shift value instead of an array of shifts
++ *
++ * Revision 1.18 2001/03/14 00:50:25 georgep
++ * All targets use FEQ_PASS_FFTSHIFT, remove code for case where its not defined
++ *
++ * Revision 1.17 2000/11/30 03:54:09 khp
++ * -BlockRealScaleCplxSymbols instead of BlockScaleComplexSymbols
++ *
++ * Revision 1.16 2000/11/29 20:42:12 liang
++ * Add function for ADSL xmt gains with fixed shift.
++ *
++ * Revision 1.15 2000/10/02 19:24:08 georgep
++ * Modify FEQ for new fft, fft outputs a shift for each block
++ *
++ * Revision 1.14 2000/09/09 00:23:48 liang
++ * Add corresponding functions for the ComplexLong FEQ coef.
++ *
++ * Revision 1.13 2000/05/17 01:36:52 yongbing
++ * Add Pentium MMX assembly codes for more block related functions
++ *
++ * Revision 1.12 2000/04/19 19:22:22 yongbing
++ * Add BlockShortScaleby2 function used in G994p1
++ *
++ * Revision 1.11 2000/04/04 02:28:01 liang
++ * Merged with SoftDsl_0_2 from old tree.
++ *
++ * Revision 1.11 2000/03/14 23:29:01 yongbing
++ * Add Pentim MMX codes for BlockCplxSymbolUpdateCplxScale function
++ *
++ * Revision 1.10 2000/02/16 01:53:00 yongbing
++ * Add Pentium MMX module for FEQ
++ *
++ * Revision 1.9 1999/11/02 02:49:55 liang
++ * Add BlockComplexPower function.
++ *
++ * Revision 1.8 1999/08/05 19:42:34 liang
++ * Merged with the softmodem top of the tree on 08/04/99 for assembly files.
++ *
++ * Revision 1.7 1999/06/16 00:54:39 liang
++ * BlockRealScaleComplexSymbols takes a scale shift buffer now.
++ *
++ * Revision 1.6 1999/05/22 02:18:29 liang
++ * Add one more parameter to BlockCplxSymbolUpdateCplxScale function.
++ *
++ * Revision 1.5 1999/05/14 22:49:39 liang
++ * Added two more functions.
++ *
++ * Revision 1.4 1999/03/26 03:29:57 liang
++ * Add function BlockComplexMultLongAcc.
++ *
++ * Revision 1.3 1999/02/22 22:40:59 liang
++ * BlockByteSum takes uchar inputs instead of schar.
++ *
++ * Revision 1.2 1999/02/10 01:56:44 liang
++ * Added BlockByteSum, BlockRealScaleComplexSymbols and BlockCplxScaleComplexSymbols.
++ *
++ * Revision 1.1 1998/10/28 01:35:38 liang
++ * *** empty log message ***
++ *
++ * Revision 1.12 1998/07/08 17:09:25 scott
++ * Removed unnecessary undefs
++ *
++ * Revision 1.11 1998/04/02 06:19:44 mwg
++ * Added two new utilities.
++ *
++ * Revision 1.10 1998/03/26 23:20:55 liang
++ * Added function BlockShortMultiply.
++ *
++ * Revision 1.9 1998/02/16 18:41:00 scott
++ * Added MMX autodetect support
++ *
++ * Revision 1.8 1997/12/13 06:11:35 mwg
++ * Added new functions:
++ * BlockLongSubtract()
++ * BlockLongAdd()
++ * BlockLong2ShortSubtract()
++ * BlockShort2LongMove()
++ * BlockShortInterpolate()
++ * BlockLongCorrelate()
++ * BlockMapShort2Short()
++ *
++ * Revision 1.7 1997/03/19 18:35:10 mwg
++ * Changed copyright notice.
++ *
++ * Revision 1.6 1997/02/11 00:08:18 mwg
++ * Added BlockByteMove function
++ *
++ * Revision 1.5 1997/02/04 08:40:08 mwg
++ * Changed interface forBlockReal2ComplexMacc()
++ *
++ * Revision 1.4 1997/01/23 02:04:28 mwg
++ * Added return value to BlockShortMove
++ *
++ * Revision 1.3 1996/12/19 22:34:55 mwg
++ * Added new function BlockFullPower().
++ *
++ * Revision 1.2 1996/02/21 03:59:15 mwg
++ * Added new function BlockReal2ComplexMacc
++ *
++ * Revision 1.1.1.1 1996/02/14 02:35:13 mwg
++ * Redesigned the project directory structure. Merged V.34 into the project.
++ *
++ * Revision 1.5 1995/04/04 06:09:32 mwg
++ * Changed the SoftModem status reporting: now the status is a structure/union
++ * where different fields used for different status code. This will enable
++ * efficient status snooping for high level protocols on top of the softmodem.
++ *
++ */
++
++#ifndef BlockUtilPh
++#define BlockUtilPh
++
++extern void BlockLongAdd (int, long*, long*, long*);
++extern void BlockLong2ShortSubtract (int, long*, long*, short*);
++extern void BlockShort2LongMove (int, short*, long*);
++extern void BlockShortMultiply (int, int, short*, short*, short*);
++extern void BlockByteMoveUnaligned (int size, uchar *srcPtr, uchar *dstPtr);
++extern void BlockShortOffset (int, short, short*, short*);
++extern long BlockShortInterpolateWithIncrement (int size, long scaleFactor, long increment, int shift, short* src1Ptr, short* src2Ptr, short* dstPtr);
++extern void BlockReal2ComplexMult (int, short*, ComplexShort*, ComplexShort*);
++extern void BlockComplexConjigateMult (int, ComplexShort*, ComplexShort*, ComplexShort*);
++
++extern long BlockSum (int, short*);
++extern long BlockByteSum (int, uchar*);
++extern void BlockComplexSum (int, ComplexShort*, ComplexLong*);
++extern void BlockComplexPower (int, int, ComplexShort*, long*);
++extern long BlockFullPower (int, short*);
++extern long BlockLongCorrelate (int, long*, long*);
++
++extern int BlockSymbol2Byte (int, int, ushort*, uchar*);
++extern int BlockByte2Symbol (int, int, uchar*, ushort*);
++
++extern void BlockMapShort2Complex (int, ushort*, ComplexByte*, ComplexShort*);
++extern void BlockMapShort2Short (int size, ushort *srcPtr, short *mapPtr, short *dstPtr);
++extern void BlockMapByte2Byte (int size, uchar *srcPtr, uchar *mapPtr, uchar *dstPtr);
++extern void BlockMapByte2Short (int size, uchar *srcPtr, short *mapPtr, short *dstPtr);
++extern void BlockShortMult (int size, int shift, short* src1Ptr, short* src2Ptr, short* dstPtr);
++
++extern int SM_DECL Idle(void);
++
++extern void BlockGenerateAngles(int size, ComplexShort *anglePtr, ComplexShort *incPtr, ComplexShort *dstPtr);
++extern void BlockExtractRealPart(int size, ComplexShort *srcPtr, short *dstPtr);
++extern void BlockShortScaleByShift (int size, int shift, short* srcPtr, short* dstPtr);
++
++#ifndef PENTIUM_REDEFS /* only if these have not been redefined to function pointers */
++extern long BlockPower (int, short*);
++extern void BlockReal2ComplexMacc (int, int, short*, ComplexShort*, ComplexLong*);
++extern void BlockComplexMult (int, ComplexShort*, ComplexShort*, ComplexShort*);
++extern void BlockShortScale (int, short, int, short*, short*);
++extern int SM_DECL BlockShortMove (int, short*, short*);
++extern long BlockCorrelate (int, short*, short*);
++
++extern void BlockRealScaleComplexSymbols(int, int, uchar*, short*, ComplexShort*, ComplexShort*);
++/* FIXME -- the following 3 functions can be removed */
++extern void BlockCplxScaleComplexSymbols(int, int, int, ComplexShort*, ComplexShort*, ComplexShort*);
++extern void BlockCplxSymbolUpdateCplxScale(int, int, int, uchar*, ComplexShort*,
++ ComplexShort*, ComplexShort*, ComplexShort*);
++extern void BlockComplexShortFill (int, short, short, ComplexShort*);
++
++
++extern void BlockRealScaleCplxSymbols(int, int, int, short*, ComplexShort*, ComplexShort*);
++extern void BlockCplxLongConjigateMultCplxShort(int, ComplexLong*, ComplexShort*, ComplexLong*);
++
++extern void BlockCplxLongScaleCplxSymbols(int, int, int, ComplexLong*, ComplexShort*, short*, ComplexShort*);
++extern void BlockCplxSymbolUpdateCplxLongScale(int, int, int, int,
++ ComplexShort*, short *, ComplexLong*, ComplexShort*);
++
++extern void BlockComplexLongFill (int, long, long, ComplexLong*);
++
++extern void BlockShortSubtract (int, short*, short*, short*);
++extern void BlockLongSubtract (int, long*, long*, long*);
++extern void BlockShortAdd (int, short*, short*, short*);
++extern void BlockByteMove (int, uchar*, uchar*);
++extern void BlockByteMoveByLong (int, uchar*, uchar*);
++extern void SM_DECL BlockByteFill (int, uchar, uchar*);
++extern void BlockByteFillByLong (int, uchar, uchar*);
++extern void BlockByteClear (int, uchar*);
++extern void BlockByteClearByLong (int, uchar*);
++extern void BlockShortFill (int, short, short*);
++extern void BlockShortClear (int, short*);
++extern void BlockShortClearByLong (int, short*);
++extern void BlockLongFill (int, long, long*);
++extern void BlockLongClear (int, long*);
++extern void BlockComplexShortClear (int, ComplexShort*);
++extern void BlockShortInvert (int, short*, short*);
++extern void BlockShortScaleDown (int, short*);
++extern void BlockLongMove (int, long*, long*);
++extern void BlockShortInterpolate (int, short, int, short*, short*, short*);
++extern void BlockComplexMultLongAcc (int, int, ComplexShort*, ComplexShort*, ComplexLong*);
++
++#endif
++
++#endif /* BlockUtilPh */
+diff -urN linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/impl1/softdsl/CircBuf.h linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/impl1/softdsl/CircBuf.h
+--- linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/impl1/softdsl/CircBuf.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/impl1/softdsl/CircBuf.h 2006-06-26 09:07:10.000000000 +0200
+@@ -0,0 +1,217 @@
++/*
++<:copyright-broadcom
++
++ Copyright (c) 2002 Broadcom Corporation
++ All Rights Reserved
++ No portions of this material may be reproduced in any form without the
++ written permission of:
++ Broadcom Corporation
++ 16215 Alton Parkway
++ Irvine, California 92619
++ All information contained in this document is Broadcom Corporation
++ company private, proprietary, and trade secret.
++
++:>
++*/
++/****************************************************************************
++ *
++ * CircBuf -- Generic Circular Buffer
++ *
++ * Description:
++ * Implementation of generic circular buffer algorithms
++ *
++ *
++ * Copyright (c) 1993-1998 AltoCom, Inc. All rights reserved.
++ * Authors: Ilya Stomakhin
++ *
++ * $Revision: 1.14 $
++ *
++ * $Id: CircBuf.h,v 1.14 2004/06/24 03:10:37 ilyas Exp $
++ *
++ * $Log: CircBuf.h,v $
++ * Revision 1.14 2004/06/24 03:10:37 ilyas
++ * Added extra macro to be able to use un-cached variable (for status write)
++ *
++ * Revision 1.13 2004/02/09 23:47:02 ilyas
++ * Fixed last change
++ *
++ * Revision 1.12 2004/02/06 22:52:58 ilyas
++ * Improved stretch buffer write
++ *
++ * Revision 1.11 2002/12/30 23:27:55 ilyas
++ * Added macro for HostDma optimizations
++ *
++ * Revision 1.10 2002/10/26 02:15:02 ilyas
++ * Optimized and added new macros for HostDma
++ *
++ * Revision 1.9 2002/01/22 23:59:29 ilyas
++ * Added paraenthesis around macro argument
++ *
++ * Revision 1.8 2002/01/15 22:28:38 ilyas
++ * Extended macro to support readPtr from uncached address
++ *
++ * Revision 1.7 2001/09/21 19:47:05 ilyas
++ * Fixed compiler warnings for VxWorks build
++ *
++ * Revision 1.6 2001/06/07 18:47:56 ilyas
++ * Added more macros for circular buffer arithmetics
++ *
++ * Revision 1.5 2001/04/18 03:58:34 ilyas
++ * Added LOG file write granularity
++ *
++ * Revision 1.4 2001/01/19 04:34:12 ilyas
++ * Added more macros to circular buffer implementation
++ *
++ * Revision 1.3 2001/01/06 04:01:41 ilyas
++ * Changed the way we write status messages
++ *
++ * Revision 1.2 2001/01/04 05:52:21 ilyas
++ * Added implementation of stretchable circular buffer used in LOG and Status
++ * handlers
++ *
++ * Revision 1.1 2000/05/03 03:45:55 ilyas
++ * Original implementation
++ *
++ *
++ *****************************************************************************/
++
++#ifndef CircBufHeader_H_
++#define CircBufHeader_H_
++
++
++typedef struct {
++ char *pStart;
++ char *pEnd;
++ char *pRead;
++ char *pWrite;
++} circBufferStruct;
++
++/* Initialize circular buffer */
++
++#define CircBufferInit(pCB,buf,size) do { \
++ (pCB)->pStart = (char *) (buf); \
++ (pCB)->pRead = (pCB)->pWrite = (pCB)->pStart; \
++ (pCB)->pEnd = (pCB)->pStart + size; \
++} while (0)
++
++#define CircBufferGetSize(pCB) ((pCB)->pEnd - (pCB)->pStart)
++#define CircBufferGetStartPtr(pCB) ((void *) (pCB)->pStart)
++#define CircBufferGetEndPtr(pCB) ((void *) (pCB)->pEnd)
++
++#define CircBufferReset(pCB) (pCB)->pRead = (pCB)->pWrite = (pCB)->pStart
++
++
++#define CircBufferGetReadPtr(pCB) ((void *) (pCB)->pRead)
++#define CircBufferGetWritePtr(pCB) ((void *) (pCB)->pWrite)
++
++
++#ifndef bcm47xx
++#define CircBufferDistance(pCB,p1,p2,d) ((char*)(p2) - (char*)(p1) - d >= 0 ? \
++ (char*)(p2) - (char*)(p1) - d : \
++ ((char*)(p2)- (char*)(p1) - d + ((pCB)->pEnd - (pCB)->pStart)))
++
++#define CircBufferAddContig(pCB,p,n) ((char*)(p) + (n) == (pCB)->pEnd ? (pCB)->pStart : (char*)(p) + (n))
++#else
++static __inline int CircBufferDistance(circBufferStruct *pCB, char *p1, char *p2, int d)
++{
++ int tmp = p2 - p1 - d;
++
++ return (tmp >= 0 ? tmp : tmp + (pCB->pEnd - pCB->pStart));
++}
++
++static __inline char * CircBufferAddContig(circBufferStruct *pCB, char *p, int n)
++{
++ p += n;
++ return (p == pCB->pEnd ? pCB->pStart : p);
++}
++#endif
++
++#define CircBufferAdd(pCB,p,n) ((char*)(p) + (n) >= (pCB)->pEnd ? \
++ (pCB)->pStart + ((char*)(p) + (n) - (pCB)->pEnd) : \
++ (char*)(p) + (n))
++
++#define CircBufferReadUpdate(pCB,n) (pCB)->pRead = CircBufferAdd(pCB,(pCB)->pRead,n)
++#define CircBufferWriteUpdate(pCB,n) (pCB)->pWrite= CircBufferAdd(pCB,(pCB)->pWrite,n)
++
++#define CircBufferReadUpdateContig(pCB,n) (pCB)->pRead = CircBufferAddContig(pCB,(pCB)->pRead,n)
++#define CircBufferWriteUpdateContig(pCB,n) (pCB)->pWrite= CircBufferAddContig(pCB,(pCB)->pWrite,n)
++
++#define CircBufferGetReadAvail(pCB) CircBufferDistance(pCB,(pCB)->pRead,(pCB)->pWrite,0)
++#define CircBufferIsReadEmpty(pCB) ((pCB)->pRead == (pCB)->pWrite)
++#define CircBufferGetWriteAvail(pCB) CircBufferDistance(pCB,(pCB)->pWrite,(pCB)->pRead,1)
++#define CircBufferGetWriteAvailN(pCB,n) CircBufferDistance(pCB,(pCB)->pWrite,(pCB)->pRead,n)
++
++#define CircBufferGetReadContig(pCB) ((unsigned long)(pCB)->pWrite >= (unsigned long) (pCB)->pRead ? \
++ (pCB)->pWrite - (pCB)->pRead : \
++ (pCB)->pEnd - (pCB)->pRead)
++
++#define CircBufferGetWriteContig(pCB) ((pCB)->pEnd - (pCB)->pWrite > CircBufferGetWriteAvail(pCB) ? \
++ CircBufferGetWriteAvail(pCB) : \
++ (pCB)->pEnd - (pCB)->pWrite)
++
++/*
++**
++** structure and macros for "strectch" buffer
++**
++*/
++
++typedef struct {
++ char *pStart;
++ char *pEnd;
++ char *pExtraEnd;
++ char *pStretchEnd;
++ char *pRead;
++ char *pWrite;
++} stretchBufferStruct;
++
++#define StretchBufferInit(pSB,buf,size,extra) do { \
++ (pSB)->pStart = (char *) (buf); \
++ (pSB)->pRead = (pSB)->pWrite = (pSB)->pStart; \
++ (pSB)->pEnd = (pSB)->pStart + (size); \
++ (pSB)->pStretchEnd = (pSB)->pEnd; \
++ (pSB)->pExtraEnd = (pSB)->pEnd+(extra); \
++} while (0)
++
++#define StretchBufferGetSize(pSB) ((pSB)->pEnd - (pSB)->pStart)
++#define StretchBufferGetStartPtr(pSB) ((void *) (pSB)->pStart)
++#define StretchBufferGetReadPtr(pSB) ((void *) (pSB)->pRead)
++#define StretchBufferGetWritePtr(pSB) ((void *) (pSB)->pWrite)
++#define StretchBufferReset(pSB) ((pSB)->pRead = (pSB)->pWrite = (pSB)->pStart)
++
++#define StretchBufferGetReadToEnd(pSB) ((pSB)->pStretchEnd - (pSB)->pRead)
++
++#define StretchBufferGetReadAvail(pSB) ((pSB)->pWrite - (pSB)->pRead >= 0 ? \
++ (pSB)->pWrite - (pSB)->pRead : \
++ (pSB)->pStretchEnd - (pSB)->pRead)
++#define _StretchBufferGetWriteAvail(pSB,rd) ((rd) - (pSB)->pWrite > 0 ? \
++ (rd) - (pSB)->pWrite - 1 : \
++ ((pSB)->pExtraEnd - (pSB)->pWrite))
++#define StretchBufferGetWriteAvail(pSB) _StretchBufferGetWriteAvail(pSB, (pSB)->pRead)
++
++#define StretchBufferReadUpdate(pSB,n) do { \
++ char *p; \
++ \
++ p = (pSB)->pRead + (n); \
++ (pSB)->pRead = (p >= (pSB)->pStretchEnd ? (pSB)->pStart : p); \
++} while (0)
++
++#define _StretchBufferWriteUpdate(pSB,rd,n) do { \
++ char *p; \
++ \
++ p = (pSB)->pWrite + (n); \
++ if (p >= (pSB)->pEnd) { \
++ if ((rd) != (pSB)->pStart) { \
++ (pSB)->pStretchEnd = p; \
++ (pSB)->pWrite = (pSB)->pStart; \
++ } \
++ } \
++ else \
++ (pSB)->pWrite = p; \
++} while (0)
++
++#define StretchBufferWriteUpdate(pSB,n) _StretchBufferWriteUpdate(pSB,(pSB)->pRead,n)
++
++#endif /* CircBufHeader_H_ */
++
++
++
+diff -urN linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/impl1/softdsl/DList.h linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/impl1/softdsl/DList.h
+--- linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/impl1/softdsl/DList.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/impl1/softdsl/DList.h 2006-06-26 09:07:10.000000000 +0200
+@@ -0,0 +1,131 @@
++/*
++<:copyright-broadcom
++
++ Copyright (c) 2002 Broadcom Corporation
++ All Rights Reserved
++ No portions of this material may be reproduced in any form without the
++ written permission of:
++ Broadcom Corporation
++ 16215 Alton Parkway
++ Irvine, California 92619
++ All information contained in this document is Broadcom Corporation
++ company private, proprietary, and trade secret.
++
++:>
++*/
++/****************************************************************************
++ *
++ * DList.h
++ *
++ * Description:
++ * Definition and implementation (via macros and inline functions)
++ * of double-linked list
++ *
++ * Copyright (c) 1993-1998 AltoCom, Inc. All rights reserved.
++ * Authors: Ilya Stomakhin
++ *
++ *****************************************************************************/
++
++#ifndef DListHeader_H_
++#define DListHeader_H_
++
++typedef struct _DListHeader
++ {
++ struct _DListHeader *next; /* next item in the list */
++ struct _DListHeader *prev; /* prev item in the list */
++ } DListHeader;
++
++typedef struct _DListUpHeader
++ {
++ struct _DListUpHeader *next; /* next item in the list */
++ struct _DListUpHeader *prev; /* prev item in the list */
++ struct _DListUpHeader *head; /* head of the list */
++ } DListUpHeader;
++
++/* Double linked list DList management macros */
++
++#define DListInit(pDListHead) do { \
++ ((DListHeader *)(pDListHead))->next = pDListHead; \
++ ((DListHeader *)(pDListHead))->prev = pDListHead; \
++} while (0)
++
++#define DListNext(pDListEntry) (((DListHeader *)(pDListEntry))->next)
++#define DListPrev(pDListEntry) (((DListHeader *)(pDListEntry))->prev)
++
++#define DListEntryLinked(pDListEntry) (NULL != DListNext(pDListEntry))
++#define DListUnlinkEntry(pDListEntry) (DListNext(pDListEntry) = DListPrev(pDListEntry) = NULL)
++
++#define DListFirst(pDListHead) DListNext(pDListHead)
++#define DListLast(pDListHead) DListPrev(pDListHead)
++#define DListValid(pDListHead,pEntry) ((void *)(pDListHead) != (pEntry))
++#define DListEmpty(pDListHead) ((void *)pDListHead == ((DListHeader *)pDListHead)->next)
++
++#define DListInsertAfter(pDListEntry,pEntry) do { \
++ ((DListHeader *)(pEntry))->next = ((DListHeader *)(pDListEntry))->next; \
++ ((DListHeader *)(pEntry))->prev = (DListHeader *)(pDListEntry); \
++ ((DListHeader *)(pDListEntry))->next->prev = (DListHeader *) (pEntry); \
++ ((DListHeader *)(pDListEntry))->next = (DListHeader *) (pEntry); \
++} while (0)
++
++#define DListInsertBefore(pDListEntry,pEntry) do { \
++ ((DListHeader *)(pEntry))->next = (DListHeader *)(pDListEntry); \
++ ((DListHeader *)(pEntry))->prev = ((DListHeader *)(pDListEntry))->prev; \
++ ((DListHeader *)(pDListEntry))->prev->next = (DListHeader *) (pEntry); \
++ ((DListHeader *)(pDListEntry))->prev = (DListHeader *) (pEntry); \
++} while (0)
++
++#define DListInsertTail(pDListHead,pEntry) DListInsertBefore(pDListHead,pEntry)
++#define DListInsertHead(pDListHead,pEntry) DListInsertAfter(pDListHead,pEntry)
++
++#define DListRemove(pDListEntry) do { \
++ ((DListHeader *)(pDListEntry))->prev->next = ((DListHeader *)(pDListEntry))->next; \
++ ((DListHeader *)(pDListEntry))->next->prev = ((DListHeader *)(pDListEntry))->prev; \
++} while (0)
++
++
++#define DListForEach(pDListHead,f,ref) do { \
++ DListHeader *p = ((DListHeader *)(pDListHead))->next; \
++ \
++ while (DListValid(pDListHead,p)) { \
++ DListHeader *p0 = p; \
++ p = DListNext(p); \
++ if ( (f)((void *)p0, ref) ) break; \
++ } \
++} while (0)
++
++
++/* Double linked list with up link DListUp management macros */
++
++#define DListUpInit(pDListHead) do { \
++ ((DListUpHeader *)(pDListHead))->next = (DListUpHeader *) (pDListHead); \
++ ((DListUpHeader *)(pDListHead))->prev = (DListUpHeader *) (pDListHead); \
++ ((DListUpHeader *)(pDListHead))->head = (DListUpHeader *) (pDListHead); \
++} while (0)
++
++#define DListUpNext(pDListEntry) ((DListUpHeader *) DListNext(pDListEntry))
++#define DListUpPrev(pDListEntry) ((DListUpHeader *) DListPrev(pDListEntry))
++#define DListUpHead(pDListEntry) (((DListUpHeader *)(pDListEntry))->head)
++
++#define DListUpFirst(pDListHead) DListUpNext(pDListHead)
++#define DListUpLast(pDListHead) DListUpPrev(pDListHead)
++#define DListUpValid(pEntry) (((DListUpHeader *)(pEntry))->head != (void *) pEntry)
++#define DListUpEmpty(pDListHead) DListEmpty(pDListHead)
++
++#define DListUpInsertAfter(pDListEntry,pEntry) do { \
++ DListInsertAfter(pDListEntry,pEntry); \
++ ((DListUpHeader *)(pEntry))->head = ((DListUpHeader *)(pDListEntry))->head; \
++} while (0)
++
++#define DListUpInsertBefore(pDListEntry,pEntry) do { \
++ DListInsertBefore(pDListEntry,pEntry); \
++ ((DListUpHeader *)(pEntry))->head = ((DListUpHeader *)(pDListEntry))->head; \
++} while (0)
++
++#define DListUpInsertTail(pDListHead,pEntry) DListUpInsertBefore(pDListHead,pEntry)
++#define DListUpInsertHead(pDListHead,pEntry) DListUpInsertAfter(pDListHead,pEntry)
++
++#define DListUpRemove(pDListEntry) DListRemove(pDListEntry)
++#define DListUpForEach(pDListHead,f,ref) DListForEach((DListHeader *)(pDListHead),f,ref)
++
++#endif /* DListHeader_H_ */
++
+diff -urN linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/impl1/softdsl/DslFramer.h linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/impl1/softdsl/DslFramer.h
+--- linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/impl1/softdsl/DslFramer.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/impl1/softdsl/DslFramer.h 2006-06-26 09:07:10.000000000 +0200
+@@ -0,0 +1,159 @@
++/*
++<:copyright-broadcom
++
++ Copyright (c) 2002 Broadcom Corporation
++ All Rights Reserved
++ No portions of this material may be reproduced in any form without the
++ written permission of:
++ Broadcom Corporation
++ 16215 Alton Parkway
++ Irvine, California 92619
++ All information contained in this document is Broadcom Corporation
++ company private, proprietary, and trade secret.
++
++:>
++*/
++/****************************************************************************
++ *
++ * DslFramer.h
++ *
++ * Description:
++ * This file contains common DSL framer definitions
++ *
++ *
++ * Copyright (c) 1993-1998 AltoCom, Inc. All rights reserved.
++ * Authors: Ilya Stomakhin
++ *
++ * $Revision: 1.3 $
++ *
++ * $Id: DslFramer.h,v 1.3 2004/07/21 01:39:41 ilyas Exp $
++ *
++ * $Log: DslFramer.h,v $
++ * Revision 1.3 2004/07/21 01:39:41 ilyas
++ * Reset entire G.997 state on retrain. Timeout in G.997 if no ACK
++ *
++ * Revision 1.2 2004/04/12 23:41:10 ilyas
++ * Added standard header for shared ADSL driver files
++ *
++ * Revision 1.1 2001/12/13 02:28:27 ilyas
++ * Added common framer (DslPacket and G997) and G997 module
++ *
++ *
++ *
++ *****************************************************************************/
++
++#ifndef DslFramerHeader
++#define DslFramerHeader
++
++#include "DList.h"
++
++#define kDslFramerInitialized 0x80000000
++
++/* status codes */
++
++#define kDslFramerRxFrame 1
++#define kDslFramerRxFrameErr 2
++#define kDslFramerTxFrame 3
++#define kDslFramerTxFrameErr 4
++
++#define kDslFramerRxFrameErrFlushed 1
++#define kDslFramerRxFrameErrAbort 2
++#define kDslFramerRxFrameErrPhy 3
++
++#define kDslFramerTxFrameErrFlushed 1
++
++
++typedef struct _dslFramerBufDesc {
++ long pkId;
++ long bufFlags;
++ void *bufPtr;
++ long bufLen;
++} dslFramerBufDesc;
++
++/* data bufDesc flags */
++
++#define kDslFramerStartNewFrame 1
++#define kDslFramerEndOfFrame 2
++#define kDslFramerAbortFrame 4
++
++#define kDslFramerExtraByteShift 3
++#define kDslFramerExtraByteMask (0x7 << kDslFramerExtraByteShift)
++
++typedef struct _dslFramerControl {
++ bitMap setup;
++ dslFrameHandlerType rxIndicateHandlerPtr;
++ dslFrameHandlerType txCompleteHandlerPtr;
++ dslStatusHandlerType statusHandlerPtr;
++ ulong statusCode;
++ ulong statusOffset;
++
++ int nRxBuffers;
++ int nRxBufSize;
++ int nRxPackets;
++
++ dslFrame *freeBufListPtr;
++ void *freeBufPool;
++ void *pBufMemory;
++
++ dslFrame *freePacketListPtr;
++ void *freePacketPool;
++
++ /* RX working data set */
++
++ dslFrame *pRxFrame;
++ dslFrameBuffer *pRxBuf;
++ uchar *pRxBufData;
++ uchar *pRxBufDataEnd;
++ int rxFrameLen;
++
++ /* TX working data set */
++
++ DListHeader dlistTxWaiting;
++ dslFrame *pTxFrame;
++ dslFrameBuffer *pTxBuf;
++ uchar *pTxBufData;
++ uchar *pTxBufDataEnd;
++
++ /* stats data */
++
++ ulong dslByteCntRxTotal;
++ ulong dslByteCntTxTotal;
++
++ ulong dslFrameCntRxTotal;
++ ulong dslFrameCntRxErr;
++ ulong dslFrameCntTxTotal;
++
++} dslFramerControl;
++
++
++extern Boolean DslFramerInit(
++ void *gDslVars,
++ dslFramerControl *dfCtrl,
++ bitMap setup,
++ ulong statusCode,
++ ulong statusOffset,
++ dslFrameHandlerType rxIndicateHandlerPtr,
++ dslFrameHandlerType txCompleteHandlerPtr,
++ dslStatusHandlerType statusHandlerPtr,
++ ulong rxBufNum,
++ ulong rxBufSize,
++ ulong rxPacketNum);
++extern void DslFramerClose(void *gDslVars, dslFramerControl *dfCtrl);
++extern void DslFramerSendFrame(void *gDslVars, dslFramerControl *dfCtrl, dslFrame *pFrame);
++extern void DslFramerReturnFrame(void *gDslVars, dslFramerControl *dfCtrl, dslFrame *pFrame);
++
++
++extern Boolean DslFramerRxGetPtr(void *gDslVars, dslFramerControl *dfCtrl, dslFramerBufDesc *pBufDesc);
++extern void DslFramerRxDone (void *gDslVars, dslFramerControl *dfCtrl, dslFramerBufDesc *pBufDesc);
++extern Boolean DslFramerTxGetPtr(void *gDslVars, dslFramerControl *dfCtrl, dslFramerBufDesc *pBufDesc);
++extern void DslFramerTxDone(void *gDslVars, dslFramerControl *dfCtrl, dslFramerBufDesc *pBufDesc);
++extern Boolean DslFramerTxIdle (void *gDslVars, dslFramerControl *dfCtrl);
++extern void DslFramerTxFlush(void *gDslVars, dslFramerControl *dfCtrl);
++
++extern void * DslFramerGetFramePoolHandler(dslFramerControl *dfCtrl);
++extern void DslFramerClearStat(dslFramerControl *dfCtrl);
++
++extern void DslFramerRxFlushFrame (void *gDslVars, dslFramerControl *dfCtrl, int errCode);
++extern void DslFramerRxFlush(void *gDslVars, dslFramerControl *dfCtrl);
++
++#endif /* DslFramerHeader */
+diff -urN linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/impl1/softdsl/Flatten.h linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/impl1/softdsl/Flatten.h
+--- linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/impl1/softdsl/Flatten.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/impl1/softdsl/Flatten.h 2006-06-26 09:07:10.000000000 +0200
+@@ -0,0 +1,115 @@
++/*
++<:copyright-broadcom
++
++ Copyright (c) 2002 Broadcom Corporation
++ All Rights Reserved
++ No portions of this material may be reproduced in any form without the
++ written permission of:
++ Broadcom Corporation
++ 16215 Alton Parkway
++ Irvine, California 92619
++ All information contained in this document is Broadcom Corporation
++ company private, proprietary, and trade secret.
++
++:>
++*/
++/****************************************************************************
++ *
++ * Flatten.h -- Header for Flatten/Unflatten command/status
++ *
++ * Copyright (c) 1998 AltoCom, Inc. All rights reserved.
++ * Authors: Ilya Stomakhin
++ *
++ * $Revision: 1.14 $
++ *
++ * $Id: Flatten.h,v 1.14 2004/03/04 19:48:52 linyin Exp $
++ *
++ * $Log: Flatten.h,v $
++ * Revision 1.14 2004/03/04 19:48:52 linyin
++ * Support adsl2plus
++ *
++ * Revision 1.13 2003/10/17 22:45:14 yongbing
++ * Increase buffer size for large B&G table of G992P3
++ *
++ * Revision 1.12 2003/08/12 23:16:26 khp
++ * - for Haixiang: added support for ADSL_MARGIN_TWEAK_TEST
++ *
++ * Revision 1.11 2003/02/27 06:33:03 ilyas
++ * Improved free space checking in command buffer (became a problem with
++ * 2 commands SetXmtgain and StartPhy)
++ *
++ * Revision 1.10 2003/01/11 01:27:07 ilyas
++ * Improved checking for available space in status buffer
++ *
++ * Revision 1.9 2002/09/07 01:43:59 ilyas
++ * Added support for OEM parameters
++ *
++ * Revision 1.8 2002/05/16 00:01:52 khp
++ * -added missing #endif
++ *
++ * Revision 1.7 2002/05/15 00:04:48 mprahlad
++ * increase the status buffer size - prevent memory overflow for annexC cases
++ *
++ * Revision 1.6 2002/04/05 04:10:33 linyin
++ * -hack to fit in Annex C firmware in LMEM
++ *
++ * Revision 1.5 2002/04/05 02:45:25 linyin
++ * Make the buffer side larger for annexC
++ *
++ * Revision 1.4 2002/01/30 07:19:06 ilyas
++ * Moved showtime code to LMEM
++ *
++ * Revision 1.3 2001/08/29 02:56:01 ilyas
++ * Added tests for flattening/unflatenning command and statuses (dual mode)
++ *
++ * Revision 1.2 2001/04/25 00:30:54 ilyas
++ * Adjusted MaxFrameLen
++ *
++ * Revision 1.1 2001/04/24 21:41:21 ilyas
++ * Implemented status flattening/unflattaning to transfer statuses between
++ * modules asynchronously through the circular buffer
++ *
++ *
++ *****************************************************************************/
++
++#ifndef _Flatten_H_
++#define _Flatten_H_
++
++#include "CircBuf.h"
++
++#ifdef ADSL_MARGIN_TWEAK_TEST
++#define kMaxFlattenedCommandSize 272 /* maximum no. of bytes in flattened cmd */
++#else
++#define kMaxFlattenedCommandSize 128 /* maximum no. of bytes in flattened cmd */
++#endif
++#if defined(G992_ANNEXC) || defined(G992P3)
++#if defined(G992P5)
++#define kMaxFlattenedStatusSize 2200 /* maximum no. of bytes in flattened status */
++#else
++#define kMaxFlattenedStatusSize 1100 /* maximum no. of bytes in flattened status */
++#endif
++#else
++#define kMaxFlattenedStatusSize 550 /* maximum no. of bytes in flattened status */
++#endif
++
++#define kMaxFlattenFramelength (kMaxFlattenedStatusSize - (4*sizeof(long)) - 20)
++
++extern int SM_DECL FlattenCommand (dslCommandStruct *cmd, ulong *dstPtr, ulong nAvail);
++extern int SM_DECL UnflattenCommand(ulong *srcPtr, dslCommandStruct *cmd);
++extern int SM_DECL FlattenStatus (dslStatusStruct *status, ulong *dstPtr, ulong nAvail);
++extern int SM_DECL UnflattenStatus (ulong *srcPtr, dslStatusStruct *status);
++
++#define FlattenBufferInit(fb,fbData,bufSize,itemSize) \
++ StretchBufferInit(fb, fbData, bufSize, itemSize)
++
++extern int SM_DECL FlattenBufferStatusWrite(stretchBufferStruct *fBuf, dslStatusStruct *status);
++extern int SM_DECL FlattenBufferStatusRead(stretchBufferStruct *fBuf, dslStatusStruct *status);
++
++extern int SM_DECL FlattenBufferCommandWrite(stretchBufferStruct *fBuf, dslCommandStruct *cmd);
++extern int SM_DECL FlattenBufferCommandRead(stretchBufferStruct *fBuf, dslCommandStruct *cmd);
++
++#define FlattenBufferReadComplete(fb,nBytes) \
++ StretchBufferReadUpdate (fb, nBytes)
++
++#endif /* _Flatten_H_ */
++
+diff -urN linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/impl1/softdsl/G992p3OvhMsg.gh linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/impl1/softdsl/G992p3OvhMsg.gh
+--- linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/impl1/softdsl/G992p3OvhMsg.gh 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/impl1/softdsl/G992p3OvhMsg.gh 2006-06-26 09:07:10.000000000 +0200
+@@ -0,0 +1,110 @@
++/*
++<:copyright-broadcom
++
++ Copyright (c) 2002 Broadcom Corporation
++ All Rights Reserved
++ No portions of this material may be reproduced in any form without the
++ written permission of:
++ Broadcom Corporation
++ 16215 Alton Parkway
++ Irvine, California 92619
++ All information contained in this document is Broadcom Corporation
++ company private, proprietary, and trade secret.
++
++:>
++*/
++/****************************************************************************
++ *
++ * G992p3OvhMsg.gh
++ *
++ * Description:
++ * This is a header file which defines the type for the G992p3 overhead
++ * channel messages global variable structure.
++ *
++ *
++ * Copyright (c) 1999-2003 BroadCom, Inc. All rights reserved.
++ * Authors: Ilya Stomakhin
++ *
++ * $Revision: 1.5 $
++ *
++ * $Id: G992p3OvhMsg.gh,v 1.5 2004/09/11 03:52:25 ilyas Exp $
++ *
++ * $Log: G992p3OvhMsg.gh,v $
++ * Revision 1.5 2004/09/11 03:52:25 ilyas
++ * Added support for overhead message segmentation
++ *
++ * Revision 1.4 2004/07/07 01:27:20 ilyas
++ * Fixed OHC message stuck problem on L2 entry/exit
++ *
++ * Revision 1.3 2004/06/10 00:13:31 ilyas
++ * Added L2/L3 and SRA
++ *
++ * Revision 1.2 2004/04/12 23:34:52 ilyas
++ * Merged the latest ADSL driver chnages for ADSL2+
++ *
++ * Revision 1.1 2003/07/18 19:39:18 ilyas
++ * Initial G.992.3 overhead channel message implementation (from ADSL driver)
++ *
++ *
++ *****************************************************************************/
++
++#ifndef G992p3OvhMsgFramerGlobals
++#define G992p3OvhMsgFramerGlobals
++
++#define kG992p3OvhMsgMaxCmdSize (16 + 16)
++#define kG992p3OvhMsgMaxRspSize (16 + 2*512)
++
++typedef struct
++ {
++ dslFrame *segFrame;
++ dslFrameBuffer *segFrBufCur;
++ dslFrameBuffer segFrBuf;
++ ulong timeSegOut;
++ uchar tryCnt;
++ uchar segTotal;
++ uchar segId;
++ }
++ g992p3SegFrameCtlStruct;
++
++typedef struct
++ {
++ bitMap setup;
++ dslFrameHandlerType rxReturnFramePtr;
++ dslFrameHandlerType txSendFramePtr;
++ dslCommandHandlerType cmdHandlerPtr;
++ dslStatusHandlerType statusHandlerPtr;
++
++ dslFrame txRspFrame;
++ dslFrameBuffer txRspFrBuf;
++ dslFrameBuffer txRspFrBuf1;
++ uchar txRspBuf[kG992p3OvhMsgMaxRspSize];
++ dslFrame txPwrRspFrame;
++ dslFrameBuffer txPwrRspFrBuf0;
++ dslFrameBuffer txPwrRspFrBuf0a;
++ dslFrameBuffer txPwrRspFrBuf1;
++ uchar txPwrRspBuf0[8];
++ dslFrame txCmdFrame;
++ dslFrameBuffer txCmdFrBuf0;
++ dslFrameBuffer txCmdFrBuf0a;
++ dslFrameBuffer txCmdFrBuf1;
++ uchar txCmdBuf[kG992p3OvhMsgMaxCmdSize];
++ g992p3SegFrameCtlStruct txSegFrameCtl;
++ ulong txFlags;
++ uchar txL0Rq;
++ uchar txL3Rq;
++
++ ulong timeMs;
++ ulong timeCmdOut;
++ ulong cmdTryCnt;
++ ulong cmdNum;
++ ulong timeRspOut;
++ uchar *txPmdCmd;
++
++ uchar rxCmdMsgNum;
++ uchar rxRspMsgNum;
++ uchar txCmdMsgNum;
++ uchar txRspMsgNum;
++ }
++ g992p3OvhMsgVarsStruct;
++
++#endif /* G992p3OvhMsgFramerGlobals */
+diff -urN linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/impl1/softdsl/G992p3OvhMsg.h linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/impl1/softdsl/G992p3OvhMsg.h
+--- linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/impl1/softdsl/G992p3OvhMsg.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/impl1/softdsl/G992p3OvhMsg.h 2006-06-26 09:07:10.000000000 +0200
+@@ -0,0 +1,64 @@
++/*
++<:copyright-broadcom
++
++ Copyright (c) 2002 Broadcom Corporation
++ All Rights Reserved
++ No portions of this material may be reproduced in any form without the
++ written permission of:
++ Broadcom Corporation
++ 16215 Alton Parkway
++ Irvine, California 92619
++ All information contained in this document is Broadcom Corporation
++ company private, proprietary, and trade secret.
++
++:>
++*/
++/****************************************************************************
++ *
++ * G992p3OvhMsg.h
++ *
++ * Description:
++ * This file contains the exported functions and definitions for G992p3
++ * overhead channel messages
++ *
++ *
++ * Copyright (c) 1999-2003 BroadCom, Inc. All rights reserved.
++ * Authors: Ilya Stomakhin
++ *
++ * $Revision: 1.1 $
++ *
++ * $Id: G992p3OvhMsg.h,v 1.1 2003/07/18 19:39:18 ilyas Exp $
++ *
++ * $Log: G992p3OvhMsg.h,v $
++ * Revision 1.1 2003/07/18 19:39:18 ilyas
++ * Initial G.992.3 overhead channel message implementation (from ADSL driver)
++ *
++ *
++ *****************************************************************************/
++
++#ifndef G992p3OvhMsgFramerHeader
++#define G992p3OvhMsgFramerHeader
++
++#define kG992p3OvhMsgFrameBufCnt -1
++
++extern Boolean G992p3OvhMsgInit(
++ void *gDslVars,
++ bitMap setup,
++ dslFrameHandlerType rxReturnFramePtr,
++ dslFrameHandlerType txSendFramePtr,
++ dslCommandHandlerType commandHandler,
++ dslStatusHandlerType statusHandler);
++
++extern void G992p3OvhMsgReset(void *gDslVars);
++extern void G992p3OvhMsgClose(void *gDslVars);
++extern void G992p3OvhMsgTimer(void *gDslVars, long timeQ24ms);
++extern Boolean G992p3OvhMsgCommandHandler (void *gDslVars, dslCommandStruct *cmd);
++extern void G992p3OvhMsgStatusSnooper (void *gDslVars, dslStatusStruct *status);
++
++extern int G992p3OvhMsgSendCompleteFrame(void *gDslVars, void *pVc, ulong mid, dslFrame *pFrame);
++extern int G992p3OvhMsgIndicateRcvFrame(void *gDslVars, void *pVc, ulong mid, dslFrame *pFrame);
++
++extern void G992p3OvhMsgSetL3(void *gDslVars);
++extern void G992p3OvhMsgSetL0(void *gDslVars);
++
++#endif /* G992p3OvhMsgFramerHeader */
+diff -urN linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/impl1/softdsl/G997.gh linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/impl1/softdsl/G997.gh
+--- linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/impl1/softdsl/G997.gh 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/impl1/softdsl/G997.gh 2006-06-26 09:07:10.000000000 +0200
+@@ -0,0 +1,66 @@
++/****************************************************************************
++ *
++ * G997.gh
++ *
++ * Description:
++ * This is a header file which defines the type for the G997 Framer
++ * global variable structure.
++ *
++ *
++ * Copyright (c) 1993-1998 AltoCom, Inc. All rights reserved.
++ * Authors: Ilya Stomakhin
++ *
++ * $Revision: 1.5 $
++ *
++ * $Id: G997.gh,v 1.5 2004/07/21 01:39:41 ilyas Exp $
++ *
++ * $Log: G997.gh,v $
++ * Revision 1.5 2004/07/21 01:39:41 ilyas
++ * Reset entire G.997 state on retrain. Timeout in G.997 if no ACK
++ *
++ * Revision 1.4 2004/04/27 00:27:16 ilyas
++ * Implemented double buffering to ensure G.997 HDLC frame is continuous
++ *
++ * Revision 1.3 2003/07/18 18:56:59 ilyas
++ * Added support for shared TX buffer (for ADSL driver)
++ *
++ * Revision 1.2 2002/01/11 06:48:27 ilyas
++ * Added command handler pointer
++ *
++ * Revision 1.1 2001/12/13 02:28:27 ilyas
++ * Added common framer (DslPacket and G997) and G997 module
++ *
++ *
++ *****************************************************************************/
++
++#ifndef G997FramerGlobals
++#define G997FramerGlobals
++
++#include "DslFramer.h"
++#include "HdlcFramer.h"
++
++#define kG997MsgBufSize 64
++
++typedef struct
++ {
++ bitMap setup;
++ dslFramerControl dslFramer;
++ hdlcByteControl hdlcByte;
++ dslCommandHandlerType commandHandler;
++
++ ulong timeMs;
++ ulong timeCmdOut;
++
++ uchar rxMsgNum;
++ uchar txMsgNum;
++ Boolean txIdle;
++ uchar txMsgBuf[kG997MsgBufSize];
++ ulong txMsgBufLen;
++ uchar *txMsgBufPtr;
++ ulong txMsgLen;
++ ulong txMsgBufs;
++ ulong txMsgBufNum;
++ }
++ g997VarsStruct;
++
++#endif /* G997FramerGlobals */
+diff -urN linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/impl1/softdsl/G997.h linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/impl1/softdsl/G997.h
+--- linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/impl1/softdsl/G997.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/impl1/softdsl/G997.h 2006-06-26 09:07:10.000000000 +0200
+@@ -0,0 +1,68 @@
++/*
++<:copyright-broadcom
++
++ Copyright (c) 2002 Broadcom Corporation
++ All Rights Reserved
++ No portions of this material may be reproduced in any form without the
++ written permission of:
++ Broadcom Corporation
++ 16215 Alton Parkway
++ Irvine, California 92619
++ All information contained in this document is Broadcom Corporation
++ company private, proprietary, and trade secret.
++
++:>
++*/
++/****************************************************************************
++ *
++ * G997.h
++ *
++ * Description:
++ * This file contains the exported functions and definitions for G97Framer
++ *
++ *
++ * Copyright (c) 1993-1998 AltoCom, Inc. All rights reserved.
++ * Authors: Ilya Stomakhin
++ *
++ * $Revision: 1.3 $
++ *
++ * $Id: G997.h,v 1.3 2003/07/18 18:56:59 ilyas Exp $
++ *
++ * $Log: G997.h,v $
++ * Revision 1.3 2003/07/18 18:56:59 ilyas
++ * Added support for shared TX buffer (for ADSL driver)
++ *
++ * Revision 1.2 2002/07/20 00:51:41 ilyas
++ * Merged witchanges made for VxWorks/Linux driver.
++ *
++ * Revision 1.1 2001/12/13 02:28:27 ilyas
++ * Added common framer (DslPacket and G997) and G997 module
++ *
++ *
++ *
++ *****************************************************************************/
++
++#ifndef G997FramerHeader
++#define G997FramerHeader
++
++extern Boolean G997Init(
++ void *gDslVars,
++ bitMap setup,
++ ulong rxBufNum,
++ ulong rxBufSize,
++ ulong rxPacketNum,
++ upperLayerFunctions *pUpperLayerFunctions,
++ dslCommandHandlerType g997PhyCommandHandler);
++
++extern void G997Close(void *gDslVars);
++extern void G997Timer(void *gDslVars, long timeQ24ms);
++extern Boolean G997CommandHandler (void *gDslVars, dslCommandStruct *cmd);
++extern void G997StatusSnooper (void *gDslVars, dslStatusStruct *status);
++
++extern int G997SendFrame(void *gDslVars, void *pVc, ulong mid, dslFrame *pFrame);
++extern int G997ReturnFrame(void *gDslVars, void *pVc, ulong mid, dslFrame *pFrame);
++
++extern Boolean G997SetTxBuffer(void *gDslVars, ulong len, void *bufPtr);
++extern void * G997GetFramePoolHandler(void *gDslVars);
++
++#endif /* G997FramerHeader */
+diff -urN linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/impl1/softdsl/HdlcFramer.h linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/impl1/softdsl/HdlcFramer.h
+--- linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/impl1/softdsl/HdlcFramer.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/impl1/softdsl/HdlcFramer.h 2006-06-26 09:07:10.000000000 +0200
+@@ -0,0 +1,237 @@
++/*
++<:copyright-broadcom
++
++ Copyright (c) 2002 Broadcom Corporation
++ All Rights Reserved
++ No portions of this material may be reproduced in any form without the
++ written permission of:
++ Broadcom Corporation
++ 16215 Alton Parkway
++ Irvine, California 92619
++ All information contained in this document is Broadcom Corporation
++ company private, proprietary, and trade secret.
++
++:>
++*/
++/****************************************************************************
++ *
++ * HdlcFramer.h
++ *
++ * Description:
++ * This file contains common HDLC definitions for bit/byte stuffing
++ *
++ *
++ * Copyright (c) 1993-1998 AltoCom, Inc. All rights reserved.
++ * Authors: Ilya Stomakhin
++ *
++ * $Revision: 1.3 $
++ *
++ * $Id: HdlcFramer.h,v 1.3 2004/07/21 01:39:41 ilyas Exp $
++ *
++ * $Log: HdlcFramer.h,v $
++ * Revision 1.3 2004/07/21 01:39:41 ilyas
++ * Reset entire G.997 state on retrain. Timeout in G.997 if no ACK
++ *
++ * Revision 1.2 2003/07/18 18:51:05 ilyas
++ * Added mode (default) to pass address and control field
++ *
++ * Revision 1.1 2001/12/13 02:28:27 ilyas
++ * Added common framer (DslPacket and G997) and G997 module
++ *
++ *
++ *
++ *****************************************************************************/
++
++#ifndef HdlcFramerHeader
++#define HdlcFramerHeader
++
++/* setup bitmap definitions */
++
++#define kHdlcSetupShift 16
++#define kHdlcSetupMask ((long)0xFFFF << kHdlcSetupShift)
++
++#define kHdlcCrcMask 0x00030000
++#define kHdlcCrcNone 0x00000000
++#define kHdlcCrc16 0x00010000
++#define kHdlcCrc32 0x00020000
++
++#define kHdlcTxIdleStop 0x00040000
++#define kHdlcSpecialAddrCtrl 0x00080000
++
++extern ushort HdlcCrc16Table[];
++
++#define HDLC16_CRC_INIT 0xFFFF
++#define HDLC16_CRC_FINAL(crc) ((crc) ^ 0xFFFF)
++#define HDLC16_GOOD_CRC 0xF0B8
++#define Hdlc16UpdateCrc(crc,b) ((crc) >> 8) ^ HdlcCrc16Table[((crc) ^ (b)) & 0xFF]
++
++extern ulong HdlcCrc32Table[];
++
++#define HDLC32_CRC_INIT 0xFFFFFFFF
++#define HDLC32_CRC_FINAL(crc) ((crc) ^ 0xFFFFFFFF)
++#define HDLC32_GOOD_CRC 0xDEBB20E3
++#define Hdlc32UpdateCrc(crc,b) ((crc) >> 8) ^ HdlcCrc32Table[((crc) ^ (b)) & 0xFF]
++
++extern ulong HdlcCrc32Table[];
++
++/* HDLC common fields */
++
++#define HDLC_ADDR 0xFF
++#define HDLC_CTRL 0x3
++
++#define HDLC_BYTE_FLAG 0x7E
++#define HDLC_BYTE_ESC 0x7D
++
++/* HDLC frame assembly states */
++
++#define HDLC_STATE_START_FLAG 0
++#define HDLC_STATE_ADDRESS (HDLC_STATE_START_FLAG + 1)
++#define HDLC_STATE_CONTROL (HDLC_STATE_START_FLAG + 2)
++#define HDLC_STATE_DATA (HDLC_STATE_START_FLAG + 3)
++#define HDLC_STATE_FCS1 (HDLC_STATE_START_FLAG + 4)
++#define HDLC_STATE_FCS2 (HDLC_STATE_START_FLAG + 5)
++#define HDLC_STATE_END_FLAG (HDLC_STATE_START_FLAG + 6)
++
++
++/* HDLC common types */
++
++typedef struct _hdlcByteControl {
++ bitMap setup;
++ dslFramerDataGetPtrHandlerType rxDataGetPtrHandler;
++ dslFramerDataDoneHandlerType rxDataDoneHandler;
++ dslFramerDataGetPtrHandlerType txDataGetPtrHandler;
++ dslFramerDataDoneHandlerType txDataDoneHandler;
++
++ /* RX working data set */
++
++ uchar rxFrameState;
++ int rxFrameLen;
++ ulong rxCrc;
++ Boolean rxEscChar;
++
++ uchar *pRxData;
++ uchar *pRxDataEnd;
++ long rxDataLen;
++
++ /* TX working data set */
++
++ uchar txFrameState;
++ int txFrameLen;
++ ulong txCrc;
++ int txCharPending;
++
++ uchar *pTxData;
++ uchar *pTxDataEnd;
++ long txDataLen;
++} hdlcByteControl;
++
++typedef struct _hdlcBitControl {
++ bitMap setup;
++ dslFramerDataGetPtrHandlerType rxDataGetPtrHandler;
++ dslFramerDataDoneHandlerType rxDataDoneHandler;
++ dslFramerDataGetPtrHandlerType txDataGetPtrHandler;
++ dslFramerDataDoneHandlerType txDataDoneHandler;
++
++ /* RX working data set */
++
++ uchar rxFrameState;
++ int rxFrameLen;
++ ulong rxCrc;
++ int rxNibblePending;
++ int rxOutVal;
++ uchar rxOutBits;
++ uchar rxRem1Bits;
++ Boolean rxEscChar; /* ???? */
++
++ uchar *pRxData;
++ uchar *pRxDataEnd;
++ long rxDataLen;
++
++ /* TX working data set */
++
++ uchar txFrameState;
++ int txFrameLen;
++ ulong txCrc;
++ int txOutVal;
++ uchar txOutBits;
++ uchar txLast1Bits;
++ int txCharPending; /* ???? */
++
++ uchar *pTxData;
++ uchar *pTxDataEnd;
++ long txDataLen;
++} hdlcBitControl;
++
++/* HDLC common functions */
++
++#define HdlcFramerTxFrameInit(ctrl) do { \
++ ctrl->txFrameState = HDLC_STATE_START_FLAG; \
++ ctrl->txFrameLen = 0; \
++ ctrl->txCrc = HDLC16_CRC_INIT; \
++ ctrl->txCharPending= -1; \
++} while (0)
++
++#define HdlcFramerRxFrameInit(ctrl) do { \
++ ctrl->rxFrameState = HDLC_STATE_START_FLAG; \
++ ctrl->rxFrameLen = 0; \
++ ctrl->rxCrc = HDLC16_CRC_INIT; \
++ ctrl->rxEscChar = false; \
++} while (0)
++
++#define HdlcFramerTxGetData(ctrl) do { \
++ dslFramerBufDesc bufDesc; \
++ \
++ if ((ctrl->txDataGetPtrHandler) (gDslVars, &bufDesc)) { \
++ ctrl->pTxData = bufDesc.bufPtr; \
++ ctrl->pTxDataEnd = (uchar*)bufDesc.bufPtr + bufDesc.bufLen; \
++ ctrl->txDataLen = bufDesc.bufLen; \
++ if (bufDesc.bufFlags & kDslFramerStartNewFrame) \
++ HdlcFramerTxFrameInit(ctrl); \
++ } \
++ else { \
++ HdlcFramerTxFrameInit(ctrl); \
++ } \
++} while (0);
++
++#define HdlcFramerRxGetData(ctrl, frFlag) do { \
++ dslFramerBufDesc bufDesc; \
++ \
++ bufDesc.bufFlags = frFlag; \
++ if ((ctrl->rxDataGetPtrHandler) (gDslVars, &bufDesc)) { \
++ ctrl->pRxData = bufDesc.bufPtr; \
++ ctrl->pRxDataEnd = (uchar*)bufDesc.bufPtr + bufDesc.bufLen; \
++ ctrl->rxDataLen = bufDesc.bufLen; \
++ } \
++} while (0);
++
++/* HDLC functions headers */
++
++extern Boolean HdlcByteInit(
++ void *gDslVars,
++ hdlcByteControl *hbyCtrl,
++ bitMap setup,
++ dslFramerDataGetPtrHandlerType rxDataGetPtrHandler,
++ dslFramerDataDoneHandlerType rxDataDoneHandler,
++ dslFramerDataGetPtrHandlerType txDataGetPtrHandler,
++ dslFramerDataDoneHandlerType txDataDoneHandler);
++
++extern void HdlcByteReset(void *gDslVars, hdlcByteControl *hbyCtrl);
++extern void HdlcByteRxFlush(void *gDslVars, hdlcByteControl *hbyCtrl);
++extern int HdlcByteRx(void *gDslVars, hdlcByteControl *hbyCtrl, int nBytes, uchar *srcPtr) FAST_TEXT;
++extern int HdlcByteTx(void *gDslVars, hdlcByteControl *hbyCtrl, int nBytes, uchar *dstPtr) FAST_TEXT;
++extern Boolean HdlcByteTxIdle(void *gDslVars, hdlcByteControl *hbyCtrl);
++
++extern Boolean HdlcBitInit(
++ void *gDslVars,
++ hdlcBitControl *hbiCtrl,
++ bitMap setup,
++ dslFramerDataGetPtrHandlerType rxDataGetPtrHandler,
++ dslFramerDataDoneHandlerType rxDataDoneHandler,
++ dslFramerDataGetPtrHandlerType txDataGetPtrHandler,
++ dslFramerDataDoneHandlerType txDataDoneHandler);
++
++extern void HdlcBitReset(void *gDslVars, hdlcByteControl *hbiCtrl);
++extern int HdlcBitRx(void *gDslVars, hdlcBitControl *hbiCtrl, int nBytes, uchar *srcPtr) FAST_TEXT;
++extern int HdlcBitTx(void *gDslVars, hdlcBitControl *hbiCtrl, int nBytes, uchar *dstPtr) FAST_TEXT;
++
++#endif /* HdlcFramerHeader */
+diff -urN linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/impl1/softdsl/MathUtil.h linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/impl1/softdsl/MathUtil.h
+--- linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/impl1/softdsl/MathUtil.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/impl1/softdsl/MathUtil.h 2006-06-26 09:07:10.000000000 +0200
+@@ -0,0 +1,135 @@
++/*
++<:copyright-broadcom
++
++ Copyright (c) 2002 Broadcom Corporation
++ All Rights Reserved
++ No portions of this material may be reproduced in any form without the
++ written permission of:
++ Broadcom Corporation
++ 16215 Alton Parkway
++ Irvine, California 92619
++ All information contained in this document is Broadcom Corporation
++ company private, proprietary, and trade secret.
++
++:>
++*/
++/************************************************************************
++ *
++ * MathUtil.h:
++ *
++ * Description:
++ * This file contains the exported interface for MathUtil.c module.
++ *
++ *
++ * Copyright (c) 1993-1997 AltoCom, Inc. All rights reserved.
++ * Authors: Mark Gonikberg, Haixiang Liang.
++ *
++ * $Revision: 1.6 $
++ *
++ * $Id: MathUtil.h,v 1.6 2004/04/13 00:21:13 ilyas Exp $
++ *
++ * $Log: MathUtil.h,v $
++ * Revision 1.6 2004/04/13 00:21:13 ilyas
++ * Added standard header for shared ADSL driver files
++ *
++ * Revision 1.5 2001/08/16 02:18:08 khp
++ * - mark functions with FAST_TEXT to reduce cycle counts for QPROC targets
++ * (replaces use of LMEM_INSN)
++ *
++ * Revision 1.4 1999/10/06 04:55:22 liang
++ * Added function to multiply two long values to save result as VeryLong.
++ *
++ * Revision 1.3 1999/08/05 19:42:52 liang
++ * Merged with the softmodem top of the tree on 08/04/99 for assembly files.
++ *
++ * Revision 1.2 1999/03/26 03:29:59 liang
++ * Export CosSin table.
++ *
++ * Revision 1.1 1998/10/28 01:28:07 liang
++ * *** empty log message ***
++ *
++ * Revision 1.12 1998/02/10 17:19:49 scott
++ * Changed MathVL routines to return arguments using pointers
++ *
++ * Revision 1.11 1997/12/13 06:12:07 mwg
++ * Added more Atan2 flavors
++ *
++ * Revision 1.10 1997/11/18 01:11:48 mwg
++ * Removed <CR> symbols which accidently slipped in.
++ *
++ * Revision 1.9 1997/11/03 19:07:52 scott
++ * No longer redefine max() and min() if already defined
++ *
++ * Revision 1.8 1997/07/30 01:35:20 liang
++ * Add more accurate atan2 function UtilLongLongAtan2.
++ *
++ * Revision 1.7 1997/07/21 20:23:19 mwg
++ * Added new function: UtilBlockCos()
++ *
++ * Revision 1.6 1997/03/21 23:50:10 liang
++ * Added initial version of V8bis module to CVS tree.
++ *
++ * Revision 1.5 1997/03/19 18:35:34 mwg
++ * Changed copyright notice.
++ *
++ * Revision 1.4 1997/01/21 00:36:15 mwg
++ * Added new function: UtilBlockCosSin()
++ *
++ * Revision 1.3 1996/06/18 21:14:45 mwg
++ * Modified VLDivVL by allowing to specify the result scaling.
++ *
++ * Revision 1.2 1996/06/12 02:31:59 mwg
++ * Added 64bit arithmetic functions.
++ *
++ * Revision 1.1.1.1 1996/02/14 02:35:15 mwg
++ * Redesigned the project directory structure. Merged V.34 into the project.
++ *
++ * Revision 1.4 1995/12/04 23:08:15 liang
++ * Add file Math/LinearToLog.c.
++ *
++ ************************************************************************/
++#ifndef MathUtilPh
++#define MathUtilPh
++
++/* Exported tables */
++extern const short UtilCosTable[];
++
++/* Exported functions */
++extern ComplexShort UtilCosSin(ushort angle);
++extern long UtilBlockCosSin (int nValues, long angle, long delta, ComplexShort *dstPtr);
++extern long UtilBlockCos (int nValues, long angle, long delta, short *dstPtr);
++extern ushort UtilShortShortAtan2(ComplexShort point);
++extern ushort UtilLongShortAtan2(ComplexLong point);
++extern ulong UtilShortLongAtan2(ComplexShort point) FAST_TEXT;
++extern ulong UtilLongLongAtan2(ComplexLong point) FAST_TEXT;
++extern ushort UtilSqrt(ulong y);
++extern ushort UtilMaxMagnitude(int blkSize, ComplexShort *dataPtr);
++extern short UtilQ0LinearToQ4dB (ulong x);
++extern ulong UtilQ4dBToQ12Linear (short x);
++extern void UtilAdjustComplexMagnitude(ComplexShort *srcPtr, short mag, short adjustment);
++
++extern void VLMultLongByLong(long x, long y, VeryLong *dst);
++extern void VLMultShort (VeryLong x, short y, VeryLong *dst);
++extern void VLAddVL (VeryLong x, VeryLong y, VeryLong *dst);
++extern void VLAddLong (VeryLong x, long y, VeryLong *dst);
++extern void VLSubVL (VeryLong x, VeryLong y, VeryLong *dst);
++extern void VLSubLong (VeryLong x, long y, VeryLong *dst);
++extern void VLDivVL (VeryLong x, VeryLong y, int scale, long *dst);
++extern void VLShiftLeft(VeryLong x, int shift, VeryLong *dst);
++extern void VLShiftRight(VeryLong x, int shift, VeryLong *dst);
++
++
++#define UtilAtan2 UtilShortShortAtan2
++#define UtilLongAtan2 UtilLongShortAtan2
++
++/* Standard Macros */
++#undef abs
++#define abs(x) ((x) >= 0 ? (x) : -(x))
++
++#undef max
++#define max(x, y) ((x) >= (y) ? (x) : (y))
++
++#undef min
++#define min(x, y) ((x) <= (y) ? (x) : (y))
++
++#endif /* MathUtilPh */
+diff -urN linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/impl1/softdsl/MipsAsm.h linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/impl1/softdsl/MipsAsm.h
+--- linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/impl1/softdsl/MipsAsm.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/impl1/softdsl/MipsAsm.h 2006-06-26 09:07:10.000000000 +0200
+@@ -0,0 +1,264 @@
++/*
++<:copyright-broadcom
++
++ Copyright (c) 2002 Broadcom Corporation
++ All Rights Reserved
++ No portions of this material may be reproduced in any form without the
++ written permission of:
++ Broadcom Corporation
++ 16215 Alton Parkway
++ Irvine, California 92619
++ All information contained in this document is Broadcom Corporation
++ company private, proprietary, and trade secret.
++
++:>
++*/
++/************************************************************************
++ *
++ * MipsAsm.h:
++ *
++ * Description:
++ * This file contains definitions specific to MIPS assembly
++ *
++ *
++ * Copyright (c) 1993-1997 AltoCom, Inc. All rights reserved.
++ * Authors: Mark Gonikberg, Haixiang Liang.
++ *
++ * $Revision: 1.5 $
++ *
++ * $Id: MipsAsm.h,v 1.5 2004/04/13 00:16:59 ilyas Exp $
++ *
++ * $Log: MipsAsm.h,v $
++ * Revision 1.5 2004/04/13 00:16:59 ilyas
++ * Merged the latest ADSL driver changes
++ *
++ * Revision 1.4 2002/09/12 04:08:50 ilyas
++ * Added macros for BCM MIPS specific instructions
++ *
++ * Revision 1.3 2000/11/18 21:28:19 mprahlad
++ * ifdef bcm47xx -
++ * define MSUB(src1,src2) msub src1, src2
++ * change Mult(dst, src1, src2) to use "mul" instead of "mult; mflo"
++ * define Mul(src1, src2) mult src1, src2
++ *
++ * Revision 1.2 2000/07/28 21:05:05 mprahlad
++ * Macros specific to bcm47xx added.
++ *
++ * Revision 1.1 1999/08/05 19:52:57 liang
++ * Copied from the softmodem top of the tree on 08/04/99.
++ *
++ * Revision 1.5 1999/04/02 23:16:21 mwg
++ * Fixed a minor comatibility issue with mult
++ *
++ * Revision 1.4 1999/02/03 20:25:43 mwg
++ * Added an option for R4010
++ *
++ * Revision 1.3 1998/10/30 02:21:34 mwg
++ * Added targets for 4640
++ *
++ * Revision 1.2 1998/10/16 18:52:09 ilyas
++ * Added ASM_PROLOG[5-7] macros to save on stores
++ *
++ * Revision 1.1 1998/06/03 23:28:39 mwg
++ * Renamed from DinoDefs.h
++ *
++ * Revision 1.6 1998/02/09 18:23:11 scott
++ * Added EMBEDDED_CALLING_CONVENTION (GreenHill) and R3900/R4102
++ *
++ * Revision 1.5 1997/03/19 18:35:02 mwg
++ * Changed copyright notice.
++ *
++ * Revision 1.4 1996/10/02 20:28:41 liang
++ * Remove parameter "acc" from the non-DINO version of MAD.
++ *
++ * Revision 1.3 1996/10/02 19:44:36 liang
++ * Separated MultAdd into MAD and MADW, added NO_DINO_WRITEBACK option.
++ *
++ * Revision 1.2 1996/08/14 03:06:07 liang
++ * Modified macro MultAdd so that the assembly code build works.
++ *
++ * Revision 1.1.1.1 1996/02/14 02:35:13 mwg
++ * Redesigned the project directory structure. Merged V.34 into the project.
++ *
++ * Revision 1.5 1994/11/04 22:41:29 mwg
++ * Added #ifdefs for different targets.
++ *
++ ************************************************************************/
++
++#ifndef _MIPS_ASM_H_
++#define _MIPS_ASM_H_
++
++#define zero $0
++#define v0 $2
++#define v1 $3
++#define a0 $4
++#define a1 $5
++#define a2 $6
++#define a3 $7
++#define t0 $8
++#define t1 $9
++#define t2 $10
++#define t3 $11
++#define t4 $12
++#define t5 $13
++#define t6 $14
++#define t7 $15
++#define s0 $16
++#define s1 $17
++#define s2 $18
++#define s3 $19
++#define s4 $20
++#define s5 $21
++#define s6 $22
++#define s7 $23
++#define t8 $24
++#define t9 $25
++#define k0 $26
++#define k1 $27
++#define gp $28
++#define sp $29
++#define fp $30
++#define s8 $30
++#define ra $31
++
++#ifdef EMBEDDED_CALLING_CONVENTION
++
++/* Support for GreenHills embedded calling convention */
++
++#define ASM_PROLOG subu sp, 32; \
++ sw $8, 16(sp); \
++ sw $9, 20(sp); \
++ sw $10, 24(sp); \
++ sw $11, 28(sp);
++
++#define ASM_PROLOG5 subu sp, 32; \
++ sw $8, 16(sp);
++
++#define ASM_PROLOG6 subu sp, 32; \
++ sw $8, 16(sp); \
++ sw $9, 20(sp);
++
++#define ASM_PROLOG7 subu sp, 32; \
++ sw $8, 16(sp); \
++ sw $9, 20(sp); \
++ sw $10, 24(sp);
++
++#define ASM_EPILOG addu sp, 32
++
++#else
++#define ASM_PROLOG
++#define ASM_PROLOG5
++#define ASM_PROLOG6
++#define ASM_PROLOG7
++#define ASM_EPILOG
++#endif
++
++#ifdef DINO /* Special DSP extensions to MIPS core */
++
++#ifndef NO_DINO_WRITEBACK /* DSP extensions with writeback register */
++
++#define MAD(src1, src2) .set noreorder ; mad $0, src1, src2 ; .set reorder
++#define MADW(acc, src1, src2) .set noreorder ; mad acc, src1, src2 ; .set reorder
++#define Mult(dst, src1, src2) .set noreorder ; mult dst, src1, src2 ; .set reorder
++#define MultU(dst, src1, src2) .set noreorder ; multu dst, src1, src2 ; .set reorder
++
++#else /* NO_DINO_WRITEBACK */
++
++#define MAD(src1, src2) .set noreorder ; mad $0, src1, src2 ; .set reorder
++#define MADW(acc, src1, src2) .set noreorder ; mad $0, src1, src2 ; mflo acc ; .set reorder
++#define Mult(dst, src1, src2) multu src1, src2 ; mflo dst
++#define MultU(dst, src1, src2) multu src1, src2 ; mflo dst
++
++#endif /* NO_DINO_WRITEBACK */
++
++#else /* DINO */
++
++#if defined(R3900)
++
++#define MAD(src1, src2) madd $0, src1, src2
++#define MADW(acc, src1, src2) madd acc, src1, src2
++#define Mult(dst, src1, src2) mult dst, src1, src2
++#define MultU(dst, src1, src2) multu dst, src1, src2
++
++#elif defined(bcm47xx_INSTR_MACROS) && defined(bcm47xx)
++
++#define mips_froo(s1,s2,s3) s1##s2##s3
++#define MSUB(s1,s2) .set noreorder ; mips_froo(msub_,s1,s2) ; .set reorder
++#define MAD(s1,s2) .set noreorder ; mips_froo(mad_,s1,s2) ; .set reorder
++#define MADW(acc, s1,s2) .set noreorder ; mips_froo(mad_,s1,s2) ; mflo acc ; .set reorder
++
++#include "BCM4710.h"
++
++#define Mult(dst, src1, src2) mul dst, src1, src2
++#define Mul( src1, src2) mult src1, src2 ;
++#define MultU(dst, src1, src2) multu src1, src2 ; mflo dst
++
++#elif defined(bcm47xx)
++#define MSUB(src1, src2) msub src1, src2
++#define MAD(src1, src2) madd src1, src2
++#define MADW(acc, src1, src2) .set noreorder ; madd src1, src2; mflo acc ; .set reorder
++/*
++#define Mult(dst, src1, src2) mult src1, src2 ; mflo dst
++*/
++#define Mult(dst, src1, src2) mul dst , src1, src2 ;
++#define Mul( src1, src2) mult src1, src2 ;
++#define MultU(dst, src1, src2) multu src1, src2 ; mflo dst
++
++#else
++
++#ifdef R4102
++#define MAD(src1, src2) madd16 src1, src2
++#define MADW(acc, src1, src2) madd16 src1, src2 ; mflo acc
++#else /* R4102 */
++
++#ifdef R4640
++
++#define MAD(src1, src2) madd $0, src1, src2
++#define MADW(acc, src1, src2) madd src1, src2; mflo acc
++
++#else /* R4640 */
++
++#ifdef R4010
++
++#define MAD(src1, src2) madd src1, src2
++#define MADW(acc, src1, src2) madd src1, src2; mflo acc
++
++#else
++#define MAD(src1, src2) .set noat ;\
++ mflo $at ;\
++ sw $2, -4(sp) ;\
++ multu src1, src2 ;\
++ mflo $2 ;\
++ addu $at, $2, $at ;\
++ lw $2, -4(sp) ;\
++ mtlo $at ;\
++ .set at
++
++#define MADW(acc, src1, src2) .set noat ;\
++ mflo $at ;\
++ sw $2, -4(sp) ;\
++ multu src1, src2 ;\
++ mflo $2 ;\
++ addu $at, $2, $at ;\
++ lw $2, -4(sp) ;\
++ move acc, $at ;\
++ mtlo $at ;\
++ .set at
++#endif /* R4010 */
++#endif /* R4102 */
++#endif /* R4640 */
++
++#define Mult(dst, src1, src2) mul dst, src1, src2
++#define MultU(dst, src1, src2) multu src1, src2 ; mflo dst
++
++#endif /* !3900 */
++#endif /* DINO */
++
++
++
++
++
++
++
++
++#endif /* _MIPS_ASM_H_ */
+diff -urN linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/impl1/softdsl/MiscUtil.h linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/impl1/softdsl/MiscUtil.h
+--- linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/impl1/softdsl/MiscUtil.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/impl1/softdsl/MiscUtil.h 2006-06-26 09:07:10.000000000 +0200
+@@ -0,0 +1,65 @@
++/*
++<:copyright-broadcom
++
++ Copyright (c) 2002 Broadcom Corporation
++ All Rights Reserved
++ No portions of this material may be reproduced in any form without the
++ written permission of:
++ Broadcom Corporation
++ 16215 Alton Parkway
++ Irvine, California 92619
++ All information contained in this document is Broadcom Corporation
++ company private, proprietary, and trade secret.
++
++:>
++*/
++/****************************************************************************
++ *
++ * MiscUtil.h -- Miscellaneous utilities
++ *
++ * Description:
++ *
++ *
++ * Copyright (c) 1993-1997 AltoCom, Inc. All rights reserved.
++ * Authors: Mark Gonikberg Haixiang Liang
++ *
++ * $Revision: 1.4 $
++ *
++ * $Id: MiscUtil.h,v 1.4 2004/04/13 00:21:46 ilyas Exp $
++ *
++ * $Log: MiscUtil.h,v $
++ * Revision 1.4 2004/04/13 00:21:46 ilyas
++ * Added standard header for shared ADSL driver files
++ *
++ * Revision 1.3 2001/07/21 01:21:06 ilyas
++ * Added more functions for int to string conversion used by log file
++ *
++ * Revision 1.2 1999/08/05 19:42:56 liang
++ * Merged with the softmodem top of the tree on 08/04/99 for assembly files.
++ *
++ * Revision 1.1 1999/01/27 22:10:12 liang
++ * Initial version.
++ *
++ * Revision 1.1 1997/07/10 01:18:45 mwg
++ * Initial revision.
++ *
++ *
++ *
++ *****************************************************************************/
++#ifndef _MISC_UTIL_H_
++#define _MISC_UTIL_H_
++
++extern long SM_DECL GetRateValue(dataRateMap rate);
++extern int SM_DECL DecToString(ulong value, uchar *dstPtr, uint nDigits);
++extern int SM_DECL HexToString(ulong value, uchar *dstPtr, uint nDigits);
++extern char * SM_DECL DecToStr(char *s, ulong num);
++extern char * SM_DECL SignedToStr(char *s, long num);
++extern char * SM_DECL HexToStr(char *s, ulong num);
++
++#define EvenParityBit(x) ((z = (y = x ^ (x >> 4)) ^ (y >> 2)) ^ (z >> 1))
++#define OddParityBit(x) (EvenParityBit(x) ^ 1)
++
++extern void ParityApply(int nBytes, int nDataBits, int parity, uchar *srcPtr, uchar *dstPtr);
++extern void ParityStrip(int nBytes, int nDataBits, int parity, uchar *srcPtr, uchar *dstPtr, statusHandlerType statusHandler);
++
++#endif
+diff -urN linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/impl1/softdsl/Que.h linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/impl1/softdsl/Que.h
+--- linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/impl1/softdsl/Que.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/impl1/softdsl/Que.h 2006-06-26 09:07:10.000000000 +0200
+@@ -0,0 +1,106 @@
++/*
++<:copyright-broadcom
++
++ Copyright (c) 2002 Broadcom Corporation
++ All Rights Reserved
++ No portions of this material may be reproduced in any form without the
++ written permission of:
++ Broadcom Corporation
++ 16215 Alton Parkway
++ Irvine, California 92619
++ All information contained in this document is Broadcom Corporation
++ company private, proprietary, and trade secret.
++
++:>
++*/
++/****************************************************************************
++ *
++ * Que.h
++ *
++ * Description:
++ * Definition and implementation (via macros and inline functions)
++ * of a simple queue
++ *
++ * Copyright (c) 1993-1998 AltoCom, Inc. All rights reserved.
++ * Authors: Ilya Stomakhin
++ *
++ *****************************************************************************/
++
++#ifndef QueHeader_H_
++#define QueHeader_H_
++
++typedef void * _QueItem;
++
++typedef struct _QueHeader
++ {
++ _QueItem *head; /* first item in the queue */
++ _QueItem *tail; /* last item in the queue */
++ } QueHeader;
++
++/* Queue management macros */
++
++#define QueInit(pqHdr) (((QueHeader *)(pqHdr))->head = ((QueHeader *)(pqHdr))->tail = NULL)
++#define QueEmpty(pqHdr) (NULL == ((QueHeader *)(pqHdr))->head)
++
++#define QueFirst(pqHdr) ((QueHeader *)(pqHdr))->head
++#define QueLast(pqHdr) ((QueHeader *)(pqHdr))->tail
++#define QueNext(pqItem) (*((void **)(pqItem)))
++
++
++#define QueRemoveFirst(pqHdr) do { \
++ if (!QueEmpty(pqHdr)) { \
++ ((QueHeader *)(pqHdr))->head = *((QueHeader *)(pqHdr))->head; \
++ if (QueEmpty(pqHdr)) \
++ ((QueHeader *)(pqHdr))->tail = NULL; \
++ } \
++} while (0)
++#define QueRemove(pqHdr) QueRemoveFirst(pqHdr)
++
++
++#define QueAddLast(pqHdr,pqItem) do { \
++ QueNext(pqItem) = NULL; \
++ if (NULL != ((QueHeader *)(pqHdr))->tail) \
++ *((QueHeader *)(pqHdr))->tail = (pqItem); \
++ else \
++ ((QueHeader *)(pqHdr))->head = (_QueItem *)(pqItem); \
++ ((QueHeader *)(pqHdr))->tail = (_QueItem *)(pqItem); \
++} while (0)
++#define QueAdd(pqHdr,pItem) QueAddLast(pqHdr,pItem)
++
++#define QueAddFirst(pqHdr,pqItem) do { \
++ if (NULL == ((QueHeader *)(pqHdr))->tail) \
++ ((QueHeader *)(pqHdr))->tail = (_QueItem *)(pqItem); \
++ QueNext(pqItem) = ((QueHeader *)(pqHdr))->head; \
++ ((QueHeader *)(pqHdr))->head = (_QueItem *)(pqItem); \
++} while (0)
++
++
++#define QueGet(pqHdr) \
++ (void *) QueFirst(pqHdr); \
++ QueRemove(pqHdr);
++
++#define QueMerge(pqHdr1,pqHdr2) do { \
++ if (NULL == ((QueHeader *)(pqHdr1))->tail) \
++ ((QueHeader *)(pqHdr1))->head = ((QueHeader *)(pqHdr2))->head; \
++ else \
++ QueNext(((QueHeader *)(pqHdr1))->tail) = ((QueHeader *)(pqHdr2))->head; \
++ if (NULL != ((QueHeader *)(pqHdr2))->tail) \
++ ((QueHeader *)(pqHdr1))->tail = ((QueHeader *)(pqHdr2))->tail; \
++} while (0)
++
++#define QueCopy(pqHdr1,pqHdr2) do { \
++ ((QueHeader *)(pqHdr1))->head = ((QueHeader *)(pqHdr2))->head; \
++ ((QueHeader *)(pqHdr1))->tail = ((QueHeader *)(pqHdr2))->tail; \
++} while (0)
++
++#define QueForEach(pqHdr,f,ref) do { \
++ _QueItem *p = ((QueHeader *)(pqHdr))->head; \
++ \
++ while (NULL != p) { \
++ if ( (f)((void *)p, ref) ) break; \
++ p = QueNext(p); \
++ } \
++} while (0)
++
++#endif /* QueHeader_H_ */
++
+diff -urN linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/impl1/softdsl/SoftAtmVc.h linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/impl1/softdsl/SoftAtmVc.h
+--- linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/impl1/softdsl/SoftAtmVc.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/impl1/softdsl/SoftAtmVc.h 2006-06-26 09:07:10.000000000 +0200
+@@ -0,0 +1,569 @@
++/*
++<:copyright-broadcom
++
++ Copyright (c) 2002 Broadcom Corporation
++ All Rights Reserved
++ No portions of this material may be reproduced in any form without the
++ written permission of:
++ Broadcom Corporation
++ 16215 Alton Parkway
++ Irvine, California 92619
++ All information contained in this document is Broadcom Corporation
++ company private, proprietary, and trade secret.
++
++:>
++*/
++/****************************************************************************
++ *
++ * SoftAtmVc.h
++ *
++ * Description:
++ * This file contains ATM VC definitions
++ *
++ *
++ * Copyright (c) 1993-1998 AltoCom, Inc. All rights reserved.
++ * Authors: Ilya Stomakhin
++ *
++ * $Revision: 1.27 $
++ *
++ * $Id: SoftAtmVc.h,v 1.27 2004/06/02 22:26:17 ilyas Exp $
++ *
++ * $Log: SoftAtmVc.h,v $
++ * Revision 1.27 2004/06/02 22:26:17 ilyas
++ * Added ATM counters for G.992.3
++ *
++ * Revision 1.26 2004/03/10 22:57:20 ilyas
++ * Added I.432 scramling control
++ *
++ * Revision 1.25 2003/09/23 00:21:59 ilyas
++ * Added status to indicate ATM header compression
++ *
++ * Revision 1.24 2003/08/27 02:00:50 ilyas
++ * Original implementation of ATM header compression
++ *
++ * Revision 1.23 2003/02/25 04:13:15 ilyas
++ * Added standard Broadcom header
++ *
++ * Revision 1.22 2003/01/10 23:25:48 ilyas
++ * Added ATM status definition
++ *
++ * Revision 1.21 2002/09/12 21:07:19 ilyas
++ * Added HEC, OCD and LCD counters
++ *
++ * Revision 1.20 2002/04/02 09:58:00 ilyas
++ * Initial implementatoin of BERT
++ *
++ * Revision 1.19 2001/10/09 22:35:14 ilyas
++ * Added more ATM statistics and OAM support
++ *
++ * Revision 1.18 2001/06/18 19:49:36 ilyas
++ * Changes to include support for HOST_ONLY mode
++ *
++ * Revision 1.17 2001/02/23 05:49:57 ilyas
++ * Added routed 1483 encapsulation
++ *
++ * Revision 1.16 2001/02/09 04:18:18 ilyas
++ * Added framer for bridged ethernet PDUs
++ *
++ * Revision 1.15 2001/02/09 01:55:27 ilyas
++ * Added status codes and macros to support printing of AAL packets
++ *
++ * Revision 1.14 2000/09/21 17:28:35 ilyas
++ * Added VBR support to traffic management code, separated UBR to a different
++ * Tx list, changed some of the algorithms
++ *
++ * Revision 1.13 2000/08/23 18:42:13 ilyas
++ * Added AAL2, added VcConfigure functions, moved commonly used look-up
++ * tables for CRC calculation to AtmLayer
++ *
++ * Revision 1.12 2000/08/02 03:06:22 ilyas
++ * Added support for reserving space in RX packets for ATm protocols
++ *
++ * Revision 1.11 2000/07/28 17:23:39 ilyas
++ * Added ATM connect/disconnect statuses
++ *
++ * Revision 1.10 2000/07/25 02:16:12 ilyas
++ * Added EClip (with Eth to ATM ARP translation) implementation
++ *
++ * Revision 1.9 2000/07/23 20:57:14 ilyas
++ * Added ATM framer and protocol layers
++ *
++ * Revision 1.8 2000/07/17 21:08:16 lkaplan
++ * removed global pointer
++ *
++ * Revision 1.7 2000/06/09 18:33:04 liang
++ * Fixed Irix compiler warnings.
++ *
++ * Revision 1.6 2000/05/18 21:47:31 ilyas
++ * Added detection of preassigned cells such as OAM F4, F5
++ *
++ * Revision 1.5 2000/05/14 01:50:11 ilyas
++ * Added more statuses to ATM code
++ *
++ * Revision 1.4 2000/05/10 02:41:28 liang
++ * Added status report for no cell memory
++ *
++ * Revision 1.3 2000/05/09 23:00:27 ilyas
++ * Added ATM status messages, ATM timer, Tx frames flush on timeout
++ * Fixed a bug - adding flushed Tx frames to the list of free Rx frames
++ *
++ * Revision 1.2 2000/05/03 03:53:00 ilyas
++ * Added support for pVc to vcID translation needed for LOG file and other
++ * definitions for ATM data in LOG file
++ *
++ * Revision 1.1 2000/04/19 00:21:35 ilyas
++ * Fixed some problems and added Out Of Band (OOB) support to ATM packets
++ *
++ *
++ *****************************************************************************/
++
++#ifndef SoftAtmVcHeader
++#define SoftAtmVcHeader
++
++/*
++**
++** ATM UNI types
++**
++*/
++
++#define AtmLinkFlags(bMap,name) (((bMap) >> name##Shift) & name##Mask)
++
++/* ATM service category types */
++
++#define kAtmSrvcCBR 1 /* Constant Bit Rate */
++#define kAtmSrvcVBR 2 /* Variable Bit Rate */
++#define kAtmSrvcUBR 4 /* Unspecified Bit Rate */
++#define kAtmSrvcABR 8 /* Available Bit Rate */
++#define kAtmSrvcUnknown 0xFF
++
++/* ATM AAL types (as encoded at UNI) */
++
++#define kAtmAalIE 0x58
++
++#define kAtmRaw 0
++#define kAtmAal1 1
++#define kAtmAal2 2
++#define kAtmAal34 3
++#define kAtmAal5 5
++#define kAtmAalUser 16
++#define kAtmAalUnknown 0xFF
++
++/* ATM AAL1 parameters */
++
++#define kAal1SubTypeId 0x85
++
++#define kAal1TransportShift 0
++#define kAal1TransportMask 0x7
++
++#define kAal1NullTransport 0
++#define kAal1VoiceTransport 1
++#define kAal1CircuitTransport 2
++#define kAal1AudioTransport 4
++#define kAal1VideoTransport 5
++
++
++#define kAal1CBRId 0x86
++
++#define kAal1CBRShift 24
++#define kAal1CBRMask 0xFF
++
++#define kAal1CBR64 1
++#define kAal1CBR1544 4 /* DS1 */
++#define kAal1CBR6312 5 /* DS2 */
++#define kAal1CBR32064 6
++#define kAal1CBR44736 7 /* DS3 */
++#define kAal1CBR97728 8
++#define kAal1CBR2048 0x10 /* E1 */
++#define kAal1CBR8448 0x11 /* E2 */
++#define kAal1CBR34368 0x12 /* E3 */
++#define kAal1CBR139264 0x13
++#define kAal1CBR64xN 0x40
++#define kAal1CBR8xN 0x41
++
++
++#define kAal1MultiplierId 0x87
++
++#define kAal1ClockRecoveryId 0x88
++
++#define kAal1ClockRecoveryShift 3
++#define kAal1ClockRecoveryMask 0x3
++
++#define kAal1ClockRecoveryNull 1 /* synchronous transport */
++#define kAal1ClockRecoverySRTS 1 /* asynchronous transport */
++#define kAal1ClockRecoveryAdaptive 2
++
++
++#define kAal1ECMId 0x89 /* Error correction method */
++
++#define kAal1ECMShift (kAal1ClockRecoveryShift + 2)
++#define kAal1ECMMask 0x3
++
++#define kAal1ECMNull 0
++#define kAal1ECMLossSensitive 1
++#define kAal1ECMDelaySensitive 2
++
++
++#define kAal1SDTBlockSizeId 0x8A
++
++#define kAal1CellFillId 0x8B
++
++/* ATM AAL34 and AAL5 parameters */
++
++#define kAalFwdMaxSDUSizeId 0x8C
++#define kAalBacMaxkSDUSizeId 0x81
++
++#define kAal34MidRangeId 0x82
++
++#define kAalSSCSTypeId 0x84
++
++#define kAalSSCSAssured 1
++#define kAalSSCSNonAssured 2
++#define kAalSSCSFrameRelay 4
++
++/* ATM AAL2 parameters */
++
++#define kAal2SSNone 0
++#define kAal2SSSAR 1
++#define kAal2SSTED 2
++#define kAal2SSSARMask 3
++#define kAal2SSType1 4
++#define kAal2SSType3 5
++
++typedef struct {
++ uchar aalType;
++ union {
++ struct {
++ bitMap aal1Flags;
++ ulong cbrRate;
++ ushort blkSize;
++ uchar sarUsed;
++ } aal1Params;
++ struct {
++ ushort fwdMaxCpSize; /* Max "common part" packet size */
++ ushort backMaxCpSize;
++ ushort cidLow;
++ ushort cidHigh;
++ ushort fwdMaxSsSize; /* Max "service specific" packet size */
++ ushort backMaxSsSize;
++ uchar sscsType;
++ } aal2Params;
++ struct {
++ ushort fwdMaxSDUSize;
++ ushort backMaxSDUSize;
++ ushort midLow;
++ ushort midHigh;
++ uchar sscsType;
++ } aal34Params;
++ struct {
++ ushort fwdMaxSDUSize;
++ ushort backMaxSDUSize;
++ uchar sscsType;
++ } aal5Params;
++ } param;
++} atmAalParams;
++
++/* ATM Traffic Descriptor types (as encoded at UNI) */
++
++#define kAtmTrafficIE 0x59
++
++#define kTrafficFwdPeakCellRateId0 0x82
++#define kTrafficBackPeakCellRateId0 0x83
++#define kTrafficFwdPeakCellRateId 0x84
++#define kTrafficBackPeakCellRateId 0x85
++
++#define kTrafficFwdSustainCellRateId0 0x88
++#define kTrafficBackSustainCellRateId0 0x89
++#define kTrafficFwdSustainCellRateId 0x90
++#define kTrafficBackSustainCellRateId 0x91
++
++#define kTrafficFwdMaxBurstSizeId0 0xA0
++#define kTrafficBackMaxBurstSizeId0 0xA1
++#define kTrafficFwdMaxBurstSizeId 0xB0
++#define kTrafficBackMaxBurstSizeId 0xB1
++
++#define kTrafficBestEffortId 0xBE
++#define kTrafficMgrOptionsId 0xBF
++
++#define kTrafficMaxTolerance 0x7FFFFFFF
++
++/* trafficFlags coding */
++
++#define kTrafficTagFwd 1
++#define kTrafficTagBack 2
++#define kTrafficBestEffort 4
++
++typedef struct {
++ ulong tPCR0; /* CLP = 0, time between cells in us */
++ ulong tPCR; /* CLP = 0+1 */
++ ulong tolPCR; /* tolerance for PCR in us */
++
++ ulong tSCR0; /* CLP = 0 */
++ ulong tSCR; /* CLP = 0+1 */
++ ulong tolSCR; /* tolerance for SCR in us */
++
++ uchar atmServiceType; /* CBR, VBR, UBR, etc. */
++ uchar trafficFlags;
++} atmTrafficParams;
++
++/* ATM Broadband Bearer Capabilty (BBC) types (as encoded at UNI) */
++
++#define kAtmBBCIE 0x5E
++
++#define kBBCClassShift 0
++#define kBBCClassMask 0x1F
++
++#define kBBCClassA 0x1
++#define kBBCClassC 0x3
++#define kBBCClassX 0x10
++
++
++#define kBBCTrafficShift (kBBCClassShift + 5)
++#define kBBCTrafficMask 0x7
++
++#define kBBCTrafficNull 0
++#define kBBCTrafficCBR 1
++#define kBBCTrafficVBR 2
++
++
++#define kBBCTimingShift (kBBCTrafficShift + 3)
++#define kBBCTimingMask 0x3
++
++#define kBBCTimingNull 0
++#define kBBCTimingRequired 1
++#define kBBCTimingNotRequired 2
++
++
++#define kBBCClippingShift (kBBCTimingShift + 2)
++#define kBBCClippingMask 0x3
++
++#define kBBCNoClipping 0
++#define kBBCClippingOk 1
++
++#define kBBCConnectionShift (kBBCClippingShift + 2)
++#define kBBCConnectionMask 0x3
++
++#define kBBCPoint2Point 0
++#define kBBCPoint2MPoint 1
++
++/* ATM Broadband High/Low Layer Information (BHLI/BLLI) types (as encoded at UNI) */
++
++#define kAtmBHLIIE 0x5D
++#define kAtmBLLIIE 0x5F
++
++/* ATM QoS types (as encoded at UNI) */
++
++#define kAtmQoSIE 0x5C
++
++#define kQoSNull 0
++#define kQoSClass1 1
++#define kQoSClass2 2
++#define kQoSClass3 3
++#define kQoSClass4 4
++#define kQoSReserved 0xFF
++
++typedef struct {
++ uchar fwdQoSClass;
++ uchar backQoSClass;
++} atmQoSParams;
++
++/* ATM MID definitions (ConfigureHandler) */
++
++#define kAtmMidEntireVc ((ulong) -1)
++
++typedef struct {
++ void *pUserVc; /* VC id from the caller: has to be 1st !!! */
++ ulong vci;
++ uchar defaultCLP; /* default CLP for tx packets on this VC */
++ uchar framerId;
++ uchar protoId;
++ uchar protoRxBytesReserved; /* # bytes reserved by protocol in the beginning of Rx packet */
++ uchar protoTxBytesReserved; /* # bytes reserved by protocol in the beginning of Tx packet */
++
++ atmAalParams aalParams;
++ atmTrafficParams rxTrafficParams;
++ atmTrafficParams txTrafficParams;
++ bitMap bbcFlags;
++ atmQoSParams qosParams;
++} atmVcParams;
++
++/*
++**
++** ATM Out of Band (OOB) packet information
++**
++*/
++
++typedef struct {
++ Boolean clp; /* Cell Loss Prioroty */
++ uchar aalType;
++ union {
++ struct {
++ uchar payloadType;
++ } aalRawParams;
++ struct {
++ uchar payloadType;
++ ushort mid;
++ } aal34Params;
++ struct {
++ uchar uui; /* Uses to user indicator */
++ uchar cpi; /* common part indicator */
++ } aal5Params;
++ } aalParam;
++} atmOobPacketInfo;
++
++/*
++**
++** ATM setup bit definition
++**
++*/
++
++#define kAtmCorrectHecErrors 1
++#define kCorrectHecErrors kAtmCorrectHecErrors
++#define kAtmPhyHeaderCompression 2
++#define kAtmPhyNoDataScrambling 4
++
++#define kAtmTxIdleTimeoutMask 0x6
++#define kAtmTxIdleNoTimeout 0
++#define kAtmTxIdleTimeout10s 2
++#define kAtmTxIdleTimeout30s 4
++#define kAtmTxIdleTimeout60s 6
++
++/*
++**
++** ATM framer modes and protocol definitions
++**
++*/
++
++#define kAtmFramerNone 0
++#define kAtmFramerISO 1
++#define kAtmFramerIP 2
++#define kAtmFramerEth 3
++#define kAtmFramerEthWithCRC 4
++
++#define kAtmProtoNone 0
++#define kAtmProtoEClip 1
++#define kAtmProtoERouted1483 2
++#define kAtmProtoPPP 3
++
++
++/*
++**
++** ATM status codes
++**
++*/
++
++typedef void (*atmStatusHandler) (void *gDslVars, ulong statusCode, ...);
++
++/* physical layer I.432 */
++
++#define kAtmStatRxHunt 1
++#define kAtmStatRxPreSync 2
++#define kAtmStatRxSync 3
++#define kAtmStatRxPlOamCell 4
++#define kAtmStatBertResult 5
++#define kAtmStatHec 6
++#define kAtmStatHdrCompr 7
++#define kAtmStatCounters 8
++
++/* ATM layer */
++
++#define kAtmLayerStatFirst 100
++#define kAtmStatRxDiscarded 100
++#define kAtmStatTxDelayed 101
++
++#define kAtmStatVcCreated 102
++#define kAtmStatVcStarted 103
++#define kAtmStatVcStopped 104
++#define kAtmStatVcDeleted 105
++
++#define kAtmStatTimeout 106
++#define kAtmStatNoCellMemory 107
++#define kAtmStatPrintCell 108
++#define kAtmStatInvalidCell 109
++#define kAtmStatUnassignedCell 110
++#define kAtmStatOamF4SegmentCell 111
++#define kAtmStatOamF4End2EndCell 112
++#define kAtmStatOamI371Cell 113
++#define kAtmStatOamF5SegmentCell 114
++#define kAtmStatOamF5End2EndCell 115
++#define kAtmStatReservedCell 116
++
++#define kAtmStatConnected 117
++#define kAtmStatDisconnected 118
++
++#define kAtmStatRxPacket 119
++#define kAtmStatTxPacket 120
++
++#define kAtmStatOamLoopback 121
++
++
++typedef struct _atmPhyCounters {
++ ushort id;
++ ushort bertStatus;
++ ulong bertCellTotal;
++ ulong bertCellCnt;
++ ulong bertBitErrors;
++
++ ulong rxHecCnt;
++ ulong rxCellTotal;
++ ulong rxCellData;
++ ulong rxCellDrop;
++} atmPhyCounters;
++
++/* AAL layer */
++
++
++
++/*
++**
++** ATM log file definitions
++**
++*/
++
++/* ATM log file flags */
++
++#define kAtmLogFrameFlagMask 3 /* mask */
++
++#define kAtmLogFrameFlagNone 0 /* nothing */
++#define kAtmLogFrameFlagNoData 1 /* no data only frame size */
++#define kAtmLogFrameFlagBinData 2 /* data in binary form */
++#define kAtmLogFrameFlagTextData 3 /* data in text form */
++
++#define kAtmLogSendFrameShift 0
++#define kAtmLogSendFrameNoData (kAtmLogFrameFlagNoData << kAtmLogSendFrameShift)
++#define kAtmLogSendFrameBinData (kAtmLogFrameFlagBinData << kAtmLogSendFrameShift)
++#define kAtmLogSendFrameTextData (kAtmLogFrameFlagTextData << kAtmLogSendFrameShift)
++
++#define kAtmLogRcvFrameShift 2
++#define kAtmLogRcvFrameNone (kAtmLogFrameFlagNone << kAtmLogRcvFrameShift)
++#define kAtmLogRcvFrameNoData (kAtmLogFrameFlagNoData << kAtmLogRcvFrameShift)
++#define kAtmLogRcvFrameBinData (kAtmLogFrameFlagBinData << kAtmLogRcvFrameShift)
++#define kAtmLogRcvFrameTextData (kAtmLogFrameFlagTextData << kAtmLogRcvFrameShift)
++
++#define kAtmLogSendCompleteFrameShift 4
++#define kAtmLogSendCompleteFrameNone (kAtmLogFrameFlagNone << kAtmLogSendCompleteFrameShift)
++#define kAtmLogSendCompleteFrameNoData (kAtmLogFrameFlagNoData << kAtmLogSendCompleteFrameShift)
++
++#define kAtmLogReturnFrameShift 6
++#define kAtmLogReturnFrameNoData (kAtmLogFrameFlagNoData << kAtmLogReturnFrameShift)
++
++#define kAtmLogCellFlag (1 << 8)
++
++/* ATM log codes */
++
++#define kAtmLogSendFrame 1
++#define kAtmLogRcvFrame 2
++#define kAtmLogSendFrameComplete 3
++#define kAtmLogReturnFrame 4
++#define kAtmLogVcAllocate 5
++#define kAtmLogVcFree 6
++#define kAtmLogVcActivate 7
++#define kAtmLogVcDeactivate 8
++#define kAtmLogTimer 9
++#define kAtmLogCell 10
++#define kAtmLogVcConfigure 11
++
++#define kAtmLogRxCellHeader 12
++#define kAtmLogRxCellData 13
++#define kAtmLogTxCell 14
++
++#endif /* SoftAtmVcHeader */
+diff -urN linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/impl1/softdsl/SoftDsl.gh linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/impl1/softdsl/SoftDsl.gh
+--- linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/impl1/softdsl/SoftDsl.gh 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/impl1/softdsl/SoftDsl.gh 2006-06-26 09:07:10.000000000 +0200
+@@ -0,0 +1,675 @@
++/****************************************************************************
++ *
++ * SoftDsl.gh
++ *
++ * Description:
++ * This is a header file which defines the type for the DSL
++ * global variable structure.
++ *
++ * Copyright (c) 1993-1997 AltoCom, Inc. All rights reserved.
++ * Authors: Ilya Stomakhin
++ *
++ * $Revision: 1.72 $
++ *
++ * $Id: SoftDsl.gh,v 1.72 2004/04/30 23:05:19 kdu Exp $
++ *
++ * $Log: SoftDsl.gh,v $
++ * Revision 1.72 2004/04/30 23:05:19 kdu
++ * Fixed interop issues in TDC lab for TMM.
++ *
++ * Revision 1.70 2004/04/10 23:30:48 ilyas
++ * Defined gloval structure for slow (SDRAM) data
++ *
++ * Revision 1.69 2004/04/02 18:33:45 gsyu
++ * Share MuxFramer buffers with scratch memory
++ *
++ * Revision 1.68 2004/02/04 20:12:38 linyin
++ * Support adsl2plus
++ *
++ * Revision 1.67 2004/02/03 19:10:37 gsyu
++ * Added separated carrierInfo structures for G992P5
++ *
++ * Revision 1.66 2004/01/26 04:21:06 yongbing
++ * Merge changes in ADSL2 branch into Annex A branch
++ *
++ * Revision 1.65 2004/01/13 19:12:07 gsyu
++ * Added two more variables for Double upstream
++ *
++ * Revision 1.64 2003/12/04 02:10:37 linyin
++ * Add a variable for FbmsOL mode
++ *
++ * Revision 1.63 2003/11/20 00:57:50 yongbing
++ * Merge ADSL2 functionalities into Annex A branch
++ *
++ * Revision 1.62 2003/11/05 01:59:12 liang
++ * Add vendor ID code for Infineon.
++ *
++ * Revision 1.61 2003/08/12 22:59:41 khp
++ * - for Haixiang: added support for ADSL_MARGIN_TWEAK_TEST
++ *
++ * Revision 1.60 2003/08/01 00:08:19 liang
++ * Added firmware ID for Samsung ADI 930 DSLAM.
++ *
++ * Revision 1.59 2003/07/14 14:40:08 khp
++ * - AnnexB: added bad SNR2 retrain counter to connectin setup
++ *
++ * Revision 1.58 2003/06/25 02:40:22 liang
++ * Added firmware ID for Annex A UE9000 ADI918 (from Aliant, Canada).
++ *
++ * Revision 1.57 2003/06/25 00:00:40 ilyas
++ * -added firmware IDs for TI 4000C and AC5 (Annex B)
++ *
++ * Revision 1.56 2003/05/31 01:50:38 khp
++ * -add firmware IDs for ECI16 and ECI16A
++ *
++ * Revision 1.55 2003/03/27 19:30:52 liang
++ * Add and initialize new connectionSetup field coVendorFirmwareID under module ADSL_IDENTIFY_VENDOR_FIRMWARE.
++ *
++ * Revision 1.54 2002/12/13 18:35:48 yongbing
++ * Add support for G.992.2 Annex C in start up
++ *
++ * Revision 1.53 2002/12/06 02:06:33 liang
++ * Moved the T1.413 RAck1/RAck2 switching variables to connection setup structure.
++ *
++ * Revision 1.52 2002/11/26 02:49:46 liang
++ * Added variable codingGainDecrement to the connectionSetup structure to solve the C-Rates-RA option failure problem.
++ *
++ * Revision 1.51 2002/10/20 18:56:16 khp
++ * - for linyin:
++ * - #ifdef NEC_NSIF_WORKAROUND:
++ * - add status and fail counter for NSIF
++ *
++ * Revision 1.50 2002/09/28 02:36:50 yongbing
++ * Add retrain in T1.413 with R-Ack1 tone
++ *
++ * Revision 1.49 2002/09/12 21:07:19 ilyas
++ * Added HEC, OCD and LCD counters
++ *
++ * Revision 1.48 2002/07/19 01:51:35 liang
++ * Added vendor ID constant for Alcatel.
++ *
++ * Revision 1.47 2002/06/27 21:51:08 liang
++ * Added xmt and rcv tone selection bitmap in connection setup.
++ *
++ * Revision 1.46 2002/06/11 20:48:06 liang
++ * Added CO vendor ID field to connectionSetup structure.
++ *
++ * Revision 1.45 2002/06/06 03:05:43 khp
++ * -use boolean in connectup setup instead of localCapabilities.features to indicate FBM mode
++ *
++ * Revision 1.44 2002/03/22 19:38:58 yongbing
++ * Modify for co-exist of G994P1 and T1P413
++ *
++ * Revision 1.43 2002/03/02 00:52:40 ilyas
++ * AnnexC delay needs to be long for prototype
++ *
++ * Revision 1.42 2002/01/19 23:59:17 ilyas
++ * Added support for LOG and eye data to ADSL core target
++ *
++ * Revision 1.41 2002/01/16 19:03:59 ilyas
++ * Added HOST_ONLY ifdefs around ADSL core data
++ *
++ * Revision 1.40 2002/01/14 17:41:04 liang
++ * Move xmt & rcv sample buffers to top level.
++ *
++ * Revision 1.39 2001/12/21 22:45:34 ilyas
++ * Added support for ADSL MIB data object
++ *
++ * Revision 1.38 2001/12/13 02:24:22 ilyas
++ * Added G997 (Clear EOC and G997 framer) support
++ *
++ * Revision 1.37 2001/11/30 05:56:31 liang
++ * Merged top of the branch AnnexBDevelopment onto top of the tree.
++ *
++ * Revision 1.36 2001/10/19 00:12:07 ilyas
++ * Added support for frame oriented (no ATM) data link layer
++ *
++ * Revision 1.29.2.5 2001/10/03 01:44:00 liang
++ * Merged with codes from main tree (tag SoftDsl_2_18).
++ *
++ * Revision 1.29.2.4 2001/08/18 00:00:36 georgep
++ * Add variable to store annexC pathDelay
++ *
++ * Revision 1.29.2.3 2001/08/08 17:33:27 yongbing
++ * Merge with tag SoftDsl_2_17
++ *
++ * Revision 1.35 2001/08/29 02:56:01 ilyas
++ * Added tests for flattening/unflatenning command and statuses (dual mode)
++ *
++ * Revision 1.34 2001/08/28 03:26:32 ilyas
++ * Added support for running host and adsl core parts separately ("dual" mode)
++ *
++ * Revision 1.33 2001/06/18 19:49:36 ilyas
++ * Changes to include support for HOST_ONLY mode
++ *
++ * Revision 1.32 2001/05/18 21:21:44 liang
++ * Save the current number of rcv samples to line handler for QProc test.
++ *
++ * Revision 1.31 2001/04/25 01:20:11 ilyas
++ *
++ * Don't use DSL frame functions if ATM_LAYER is not defined
++ *
++ * Revision 1.30 2001/03/25 06:11:20 liang
++ * Combined separate loop attenuation status for ATUR & ATUC into one status.
++ * Replace separate hardware AGC info status for ATUR & ATUC into hardware AGC
++ * request status and hardware AGC obtained status.
++ * Use store AGC command to save hardware AGC value instead of returning value
++ * from status report.
++ *
++ * Revision 1.29 2001/03/17 03:00:46 georgep
++ * Added agcInfo to connectionSetupStruct
++ *
++ * Revision 1.28 2001/02/10 03:03:09 ilyas
++ * Added one more DslFrame function
++ *
++ * Revision 1.27 2000/08/31 19:04:24 liang
++ * Added scratch buffer structure definition.
++ *
++ * Revision 1.26 2000/07/23 20:52:52 ilyas
++ * Added xxxFrameBufSetAddress() function for ATM framer layers
++ * Rearranged linkLayer functions in one structure which is passed as a
++ * parameter to xxxLinkLayerInit() function to be set there
++ *
++ * Revision 1.25 2000/07/18 21:42:25 ilyas
++ * Fixed compiler warning about pointer casting
++ *
++ * Revision 1.24 2000/07/18 21:18:45 ilyas
++ * Added GLOBAL_PTR_BIAS feature to utilize full 64K MIPS relative addressing space
++ *
++ * Revision 1.23 2000/07/18 20:03:24 ilyas
++ * Changed DslFrame functions definitions to macros,
++ * Removed gDslVars from their parameter list
++ *
++ * Revision 1.22 2000/07/17 21:08:15 lkaplan
++ * removed global pointer
++ *
++ * Revision 1.21 2000/05/09 23:00:26 ilyas
++ * Added ATM status messages, ATM timer, Tx frames flush on timeout
++ * Fixed a bug - adding flushed Tx frames to the list of free Rx frames
++ *
++ * Revision 1.20 2000/05/03 03:57:04 ilyas
++ * Added LOG file support for writing ATM data
++ *
++ * Revision 1.19 2000/04/19 00:31:47 ilyas
++ * Added global SoftDsl functions for Vc, added OOB info functions
++ *
++ * Revision 1.18 2000/04/13 08:36:22 yura
++ * Added SoftDslSetRefData, SoftDslGetRefData functions
++ *
++ * Revision 1.17 2000/04/13 05:38:54 georgep
++ * Added T1p413 "Activation and Acknowledgement" which can substitute G994P1
++ *
++ * Revision 1.16 2000/04/05 22:30:42 liang
++ * Changed function & constant names from G992p2 to G992 for the Main module.
++ *
++ * Revision 1.15 2000/04/04 04:16:06 liang
++ * Merged with SoftDsl_0_03 from old tree.
++ *
++ * Revision 1.15 2000/04/04 01:47:21 ilyas
++ * Implemented abstract dslFrame and dslFrameBuffer objects
++ *
++ * Revision 1.14 2000/04/01 02:53:33 georgep
++ * Added pointer to G992p2Profile inside connectionSetup
++ *
++ * Revision 1.13 2000/03/18 01:27:56 georgep
++ * Changed connectionSetup to include G992p1 Capabilities
++ *
++ * Revision 1.12 2000/02/29 01:39:05 georgep
++ * put variable haveRemoteCapabilities inside connectionSetupStruct
++ *
++ * Revision 1.11 2000/02/08 00:44:36 liang
++ * Fix the gDslVars definition for Irix environment.
++ *
++ * Revision 1.10 1999/11/19 00:59:29 george
++ * Define physicalLayerVars as a union
++ *
++ * Revision 1.9 1999/11/11 19:19:42 george
++ * Porting to 16Bit Compiler
++ *
++ * Revision 1.8 1999/11/09 20:26:17 george
++ * Added G992P2_PROFILE to modules list
++ *
++ * Revision 1.7 1999/10/27 23:01:54 wan
++ * Add G.994.1 setup in dslConnectionSetupStruct for setting up Initiation side
++ *
++ * Revision 1.6 1999/08/12 21:16:27 george
++ * Move profileVars definition to G992p2/G992p2Profile.gh
++ *
++ * Revision 1.5 1999/08/10 18:20:43 george
++ * Define fastRetrainVars
++ *
++ * Revision 1.4 1999/07/16 02:03:02 liang
++ * Added Tx & Rx data handler function pointers.
++ *
++ * Revision 1.3 1999/07/03 01:40:15 liang
++ * Redefined dsl command parameter list and added connection setup struct.
++ *
++ * Revision 1.2 1999/02/10 01:56:37 liang
++ * Added hooks for G994.1 and G992.2.
++ *
++ *
++ *****************************************************************************/
++
++#ifndef SoftDslGlobals
++#define SoftDslGlobals
++
++#include "SoftDsl.h"
++
++#ifdef G992P2_PROFILE
++#include "G992p2Profile.gh"
++#endif
++
++typedef enum
++ {
++ kVendorUnknown = 0,
++ kVendorBroadcom,
++ kVendorGlobespan,
++ kVendorADI,
++ kVendorTI,
++ kVendorCentillium,
++ kVendorAlcatel,
++ kVendorInfineon
++ } VendorIDType;
++
++#define kDslVendorFirwareUnknown 0
++typedef enum
++ {
++ kVendorADI_Anaconda = 1,
++ kVendorADI_ECI918,
++ kVendorADI_ECI930,
++ kVendorADI_Cisco,
++ kVendorADI_UE9000_918,
++ kVendorADI_Samsung_930,
++ kVendorTI_4000C_ERICSSON_350,
++ kVendorTI_4000C_SEIMENS,
++ kVendorADI_ECI16_AnnexB = 50, /* leave space for more Annex A types */
++ kVendorADI_ECI16A_AnnexB,
++ kVendorTI_4000C_AnnexB,
++ kVendorTI_AC5_AnnexB
++ } VendorFirmwareIDType;
++
++#define kDslXmtToneSelectionStartTone 0
++#ifdef G992P1_ANNEX_B
++#define kDslXmtToneSelectionEndTone 63
++#else
++#define kDslXmtToneSelectionEndTone 31
++#endif
++#define kDslXmtToneSelectionNumOfTones (kDslXmtToneSelectionEndTone-kDslXmtToneSelectionStartTone+1)
++#define kDslXmtToneSelectionNumOfBytes ((kDslXmtToneSelectionNumOfTones+7)/8)
++#define kDslRcvToneSelectionStartTone 32
++#define kDslRcvToneSelectionEndTone 255
++#define kDslRcvToneSelectionNumOfTones (kDslRcvToneSelectionEndTone-kDslRcvToneSelectionStartTone+1)
++#define kDslRcvToneSelectionNumOfBytes ((kDslRcvToneSelectionNumOfTones+7)/8)
++
++#define kDslT1p413RAckModeTryRAck1 0x01
++#define kDslT1p413RAckModeTryRAck2 0x02
++#define kDslT1p413RAckModeTrialMask 0x0F
++#define kDslT1p413RAckModeSelected 0x10
++#define kDslT1p413RAckModeTrialCount 10 /* when in trial mode */
++#define kDslT1p413RAckModeSwitchCount 20 /* when mode is selected */
++
++#ifdef ADSL_MARGIN_TWEAK_TEST
++#define kDslMarginTweakNumOfTones 256
++#endif
++
++typedef struct
++ {
++ Boolean haveRemoteCapabilities;
++ dslModulationType selectedModulation;
++ dslModulationType startupModulation;
++#if defined(G992P1_ANNEX_I) || defined(G992P5)
++ ushort downstreamMinCarr, downstreamMaxCarr;
++#else
++ uchar downstreamMinCarr, downstreamMaxCarr;
++#endif
++ uchar upstreamMinCarr, upstreamMaxCarr;
++#if defined(DOUBLE_UP_STREAM)
++ Boolean isDoubleUsEnabled;
++ short selectedPilotTone;
++#endif
++ dslDataPumpCapabilities localCapabilities, remoteCapabilities;
++#ifdef G992P3
++ g992p3DataPumpCapabilities localCarrierInfoG992p3AnnexA;
++ g992p3DataPumpCapabilities remoteCarrierInfoG992p3AnnexA;
++ g992p3DataPumpCapabilities selectedCarrierInfoG992p3AnnexA;
++ uchar xmtG992p3State;
++#ifdef G992P5
++ g992p3DataPumpCapabilities localCarrierInfoG992p5AnnexA;
++ g992p3DataPumpCapabilities remoteCarrierInfoG992p5AnnexA;
++ g992p3DataPumpCapabilities selectedCarrierInfoG992p5AnnexA;
++#endif /* G992P5 */
++#endif /* G992P3 */
++ uchar handshakingDuplexMode;
++ Boolean handshakingClientInitiation;
++ short handshakingXmtPowerLevel;
++ uchar handshakingXmtCarrierSet;
++ short hwAgcQ4dB; /* for loop attenuation calculation */
++ uchar coVendorID;
++#ifdef ADSL_IDENTIFY_VENDOR_FIRMWARE
++ uchar coVendorFirmwareID;
++#endif
++ uchar codingGainDecrement; /* coding gain decrement in Q4dB for initial rate calculation */
++ uchar xmtToneSelection[kDslXmtToneSelectionNumOfBytes];
++ uchar rcvToneSelection[kDslRcvToneSelectionNumOfBytes];
++#ifdef G992_ANNEXC
++ Boolean isFbmMode;
++ Boolean isFbmsOLMode;
++ long xmtToRcvPathDelay;
++#endif
++#if defined(T1P413) && defined(XMT_RACT2_FOR_ADI_COMPATIBILITY)
++ uchar t1p413RAckModeUsed;
++ uchar t1p413RAckModeCounter;
++#endif
++#ifdef G992P1_ANNEX_B
++ uchar badSNR2RetrainCounter;
++#endif
++#ifdef ADSL_MARGIN_TWEAK_TEST
++ short marginTweakExtraPowerQ4dB;
++ char marginTweakTableQ4dB[kDslMarginTweakNumOfTones];
++#endif
++#ifdef G992P2_PROFILE
++ G992p2ProfileVarsStruct* profileVarsPtr;
++#endif
++#ifdef TDC_IOP_FIX_SEIMENS_TI
++ char t1p413RetrainCounter; /* 0: no retrain needed; 1: force to T1.413 mode and retrain after R-MSG1; 2: 2nd T1.413 session, go to showtime */
++#endif
++#ifdef ANSI_CACT12_PING_PONG
++ char t1p413SkipToneIndex; /* to alternate between CAct1 and CAct2 detection */
++#endif
++ } dslConnectionSetupStruct;
++
++#ifdef ADSL_FRAMER
++#include "MuxFramer.gh"
++#endif
++
++#ifdef ATM
++#include "SoftAtm.gh"
++#endif
++
++#ifdef DSL_PACKET
++#include "DslPacket.gh"
++#endif
++
++#ifdef G997_1_FRAMER
++#include "G997.gh"
++#ifdef G992P3
++#include "G992p3OvhMsg.gh"
++#endif
++#endif
++
++#ifdef ADSL_MIB
++#include "AdslMib.gh"
++#endif
++
++#ifndef HOST_ONLY
++#ifdef T1P413
++#include "T1p413Main.gh"
++#endif
++
++#ifdef G994P1
++#include "G994p1Main.gh"
++#endif
++
++#ifdef G992
++#include "G992Main.gh"
++#endif
++
++#include "SoftDslSampleBuffers.gh"
++#endif
++
++typedef struct __dslSlowVarsStruct
++ {
++ int tmp;
++ }
++ dslSlowVarsStruct;
++
++typedef struct __dslVarsStruct
++ {
++ bitMap setup;
++ eyeHandlerType eyeHandlerPtr;
++ logHandlerType logHandlerPtr;
++ dslDriverCallbackType driverCallback;
++
++ rcvHandlerType rcvHandlerPtr;
++ xmtHandlerType xmtHandlerPtr;
++
++#ifndef ADSLCORE_ONLY
++ dslCommandHandlerType adslCoreCommandHandlerPtr;
++#endif
++ dslCommandHandlerType dataPumpCommandHandlerPtr;
++
++ dslStatusHandlerType internalStatusHandlerPtr;
++ dslStatusHandlerType externalStatusHandlerPtr;
++#ifndef ADSLCORE_ONLY
++ dslStatusHandlerType externalLinkLayerStatusHandlerPtr;
++#endif
++
++ dslDirectionType direction;
++ dslConnectionSetupStruct connectionSetup;
++
++#ifdef NEC_NSIF_WORKAROUND
++ uchar G994NsStatus;
++ uchar G994NsFailCounter;
++#endif
++
++ dslFrameHandlerType rxIndicateHandlerPtr;
++ dslFrameHandlerType txCompleteHandlerPtr;
++
++ linkLayerFunctions LinkLayerFunctions;
++ dslSlowVarsStruct *dslSlowVars;
++
++#ifdef DSL_FRAME_FUNCTIONS
++ dslFrameFunctions DslFrameFunctions;
++#endif
++ ulong refData;
++ ulong execTime;
++ int currRcvNSamps;
++
++#ifndef HOST_ONLY
++ DslSampleBuffersStruct sampleBuffersVars;
++
++#ifdef G992P2_PROFILE
++ G992p2ProfileVarsStruct G992p2ProfileVars;
++#endif
++
++#ifdef ADSL_FRAMER
++ muxFramerVarsStruct muxFramerVars;
++#endif
++#endif /* HOST_ONLY */
++
++#ifdef DSL_LINKLAYER
++ union
++ {
++#ifdef ATM
++ atmVarsStruct atmVars;
++#endif
++#ifdef DSL_PACKET
++ dslPacketVarsStruct dslPacketVars;
++#endif
++ } linkLayerVars;
++#endif
++
++#ifdef G997_1_FRAMER
++ g997VarsStruct G997Vars;
++#ifdef G992P3
++ g992p3OvhMsgVarsStruct G992p3OvhMsgVars;
++#endif
++#endif
++
++#ifdef ADSL_MIB
++ adslMibVarsStruct adslMibVars;
++#endif
++
++#ifndef HOST_ONLY
++ union
++ {
++#ifdef T1P413
++ T1p413VarsStruct T1p413Vars;
++#endif
++#ifdef G994P1
++ G994p1VarsStruct G994p1Vars;
++#endif
++#ifdef G992
++ G992VarsStruct G992Vars;
++#endif
++ } physicalLayerVars;
++ union
++ {
++#ifdef G992
++ G992ScratchVarsStruct G992ScratchVars;
++#endif
++#if defined(ADSL_FRAMER) && defined(SHARE_MUX_FRAMER_VARS)
++ muxFramerSharedVarsStruct muxFramerSharedVars;
++#endif
++ } scratchVars;
++#endif /* HOST_ONLY */
++
++ }
++ dslVarsStruct;
++
++#ifndef GLOBAL_PTR_BIAS
++#define gDslGlobalVarPtr ((struct __dslVarsStruct *)gDslVars)
++#define gDslGlobalSlowVarPtr (gDslGlobalVarPtr->dslSlowVars)
++#else
++#define gDslGlobalVarPtr ((struct __dslVarsStruct *) (void*)((uchar*)(gDslVars) - GLOBAL_PTR_BIAS))
++#define gDslGlobalSlowVarPtr ((struct __dslSlowVarsStruct *) (void*)((uchar*)(gDslGlobalVarPtr->dslSlowVars) - GLOBAL_PTR_BIAS))
++#endif
++
++#define gDslSampleBuffersVars (gDslGlobalVarPtr->sampleBuffersVars)
++
++#define gDslMuxFramerVars (gDslGlobalVarPtr->muxFramerVars)
++#define gDslMuxFramerSharedVars (gDslGlobalVarPtr->scratchVars.muxFramerSharedVars)
++#define gDslLinkLayerVars (gDslGlobalVarPtr->linkLayerVars)
++#define gDslAtmVars (gDslGlobalVarPtr->linkLayerVars.atmVars)
++#define gDslPacketVars (gDslGlobalVarPtr->linkLayerVars.dslPacketVars)
++#define gG997Vars (gDslGlobalVarPtr->G997Vars)
++
++#ifdef G992P3
++#define gG992p3OvhMsgVars (gDslGlobalVarPtr->G992p3OvhMsgVars)
++#endif
++
++#define gAdslMibVars (gDslGlobalVarPtr->adslMibVars)
++
++#define gT1p413Vars (gDslGlobalVarPtr->physicalLayerVars.T1p413Vars)
++#define gG994p1Vars (gDslGlobalVarPtr->physicalLayerVars.G994p1Vars)
++#define gG992Vars (gDslGlobalVarPtr->physicalLayerVars.G992Vars)
++#define gG992p2ProfileVars (gDslGlobalVarPtr->G992p2ProfileVars)
++
++#define gG992ScratchVars (gDslGlobalVarPtr->scratchVars.G992ScratchVars)
++
++#ifndef gEyeHandlerPtr
++#define gEyeHandlerPtr (gDslGlobalVarPtr->eyeHandlerPtr)
++#endif
++
++#ifndef gLogHandlerPtr
++#define gLogHandlerPtr (gDslGlobalVarPtr->logHandlerPtr)
++#endif
++
++#ifdef VP_SIMULATOR
++#define gDriverCallback(x) (gDslGlobalVarPtr->driverCallback)(x)
++#else
++#define gDriverCallback(x)
++#endif
++
++/*
++**
++** Frame functions callouts
++**
++*/
++
++#define gDslFrameFunc (gDslGlobalVarPtr->DslFrameFunctions)
++
++#define DslFrameBufferGetLength(gDslVars, fb) \
++ gDslFrameFunc.__DslFrameBufferGetLength(fb)
++
++#define DslFrameBufferGetAddress(gDslVars, fb) \
++ gDslFrameFunc.__DslFrameBufferGetAddress(fb)
++
++#define DslFrameBufferSetLength(gDslVars, fb, l) \
++ gDslFrameFunc.__DslFrameBufferSetLength(fb, l)
++
++#define DslFrameBufferSetAddress(gDslVars, fb, p) \
++ gDslFrameFunc.__DslFrameBufferSetAddress(fb, p)
++
++#define DslFrameInit(gDslVars, f) \
++ gDslFrameFunc.__DslFrameInit(f)
++
++#define DslFrameGetLength(gDslVars, pFrame) \
++ gDslFrameFunc.__DslFrameGetLength(pFrame)
++
++#define DslFrameGetBufCnt(gDslVars, pFrame) \
++ gDslFrameFunc.__DslFrameGetBufCnt(pFrame)
++
++#define DslFrameGetFirstBuffer(gDslVars, pFrame) \
++ gDslFrameFunc.__DslFrameGetFirstBuffer(pFrame)
++
++#define DslFrameGetNextBuffer(gDslVars, pFrBuffer) \
++ gDslFrameFunc.__DslFrameGetNextBuffer(pFrBuffer)
++
++#define DslFrameSetNextBuffer(gDslVars, pFrBuf, pFrBufNext) \
++ gDslFrameFunc.__DslFrameSetNextBuffer(pFrBuf, pFrBufNext)
++
++#define DslFrameGetLastBuffer(gDslVars, pFrame) \
++ gDslFrameFunc.__DslFrameGetLastBuffer(pFrame)
++
++#define DslFrameGetLinkFieldAddress(gDslVars, f) \
++ gDslFrameFunc.__DslFrameGetLinkFieldAddress(f)
++
++#define DslFrameGetFrameAddressFromLink(gDslVars, lnk) \
++ gDslFrameFunc.__DslFrameGetFrameAddressFromLink(lnk)
++
++
++#define DslFrameGetOobInfo(gDslVars, f, pOobInfo) \
++ gDslFrameFunc.__DslFrameGetOobInfo(f, pOobInfo)
++
++#define DslFrameSetOobInfo(gDslVars, f, pOobInfo) \
++ gDslFrameFunc.__DslFrameSetOobInfo(f, pOobInfo)
++
++
++#define DslFrameEnqueBufferAtBack(gDslVars, f, b) \
++ gDslFrameFunc.__DslFrameEnqueBufferAtBack(f, b)
++
++#define DslFrameEnqueFrameAtBack(gDslVars, fMain, f) \
++ gDslFrameFunc.__DslFrameEnqueFrameAtBack(fMain, f)
++
++#define DslFrameEnqueBufferAtFront(gDslVars, f, b) \
++ gDslFrameFunc.__DslFrameEnqueBufferAtFront(f, b)
++
++#define DslFrameEnqueFrameAtFront(gDslVars, fMain, f) \
++ gDslFrameFunc.__DslFrameEnqueFrameAtFront(fMain, f)
++
++#define DslFrameDequeBuffer(gDslVars, pFrame) \
++ gDslFrameFunc.__DslFrameDequeBuffer(pFrame)
++
++#define DslFrameAllocMemForFrames(gDslVars, frameNum) \
++ gDslFrameFunc.__DslFrameAllocMemForFrames(frameNum)
++
++#define DslFrameFreeMemForFrames(gDslVars, hMem) \
++ gDslFrameFunc.__DslFrameFreeMemForFrames(hMem)
++
++#define DslFrameAllocFrame(gDslVars, handle) \
++ gDslFrameFunc.__DslFrameAllocFrame(handle)
++
++#define DslFrameFreeFrame(gDslVars, handle, pFrame) \
++ gDslFrameFunc.__DslFrameFreeFrame(handle, pFrame)
++
++#define DslFrameAllocMemForBuffers(gDslVars, ppMemPool, bufNum, memSize) \
++ gDslFrameFunc.__DslFrameAllocMemForBuffers(ppMemPool, bufNum, memSize)
++
++#define DslFrameFreeMemForBuffers(gDslVars, hMem, memSize, pMemPool) \
++ gDslFrameFunc.__DslFrameFreeMemForBuffers(hMem, memSize, pMemPool)
++
++#define DslFrameAllocBuffer(gDslVars, handle, pMem, length) \
++ gDslFrameFunc.__DslFrameAllocBuffer(handle, pMem, length)
++
++#define DslFrameFreeBuffer(gDslVars, handle, pBuf) \
++ gDslFrameFunc.__DslFrameFreeBuffer(handle, pBuf)
++
++#define DslFrame2Id(gDslVars, handle, pFrame) \
++ gDslFrameFunc.__DslFrame2Id(handle, pFrame)
++
++#define DslFrameId2Frame(gDslVars, handle, frameId) \
++ gDslFrameFunc.__DslFrameId2Frame (handle, frameId)
++
++
++#endif /* SoftDslGlobals */
+diff -urN linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/impl1/softdsl/SoftDsl.h linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/impl1/softdsl/SoftDsl.h
+--- linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/impl1/softdsl/SoftDsl.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/impl1/softdsl/SoftDsl.h 2006-06-26 09:07:10.000000000 +0200
+@@ -0,0 +1,2920 @@
++/****************************************************************************
++ *
++ * SoftDsl.h
++ *
++ *
++ * Description:
++ * This file contains the exported interface for SoftDsl.c
++ *
++ *
++ * Copyright (c) 1993-1998 AltoCom, Inc. All rights reserved.
++ * Authors: Ilya Stomakhin
++ *
++ * $Revision: 1.275 $
++ *
++ * $Id: SoftDsl.h,v 1.275 2005/04/28 22:55:36 ilyas Exp $
++ *
++ * $Log: SoftDsl.h,v $
++ * Revision 1.275 2005/04/28 22:55:36 ilyas
++ * Cleaned up kDslG992RunAnnexaP3ModeInAnnexaP5, kG992EnableAnnexM and kDslAtuChangeTxFilterRequest definitions
++ *
++ * Revision 1.274 2005/04/27 20:57:32 yongbing
++ * Implement 32 frequency break points for TSSI, PR 30211
++ *
++ * Revision 1.273 2005/04/02 03:27:52 kdu
++ * PR30236: Define kDslEnableRoundUpDSLoopAttn, this is shared with kDslCentilliumCRCWorkAroundEnabled.
++ *
++ * Revision 1.272 2005/04/01 21:56:39 ilyas
++ * Added more test commands definitions
++ *
++ * Revision 1.271 2005/02/11 05:03:57 ilyas
++ * Added support for DslOs
++ *
++ * Revision 1.270 2005/02/11 03:33:22 lke
++ * Support 2X, 4X, and 8X spectrum in ANNEX_I DS
++ *
++ * Revision 1.269 2005/01/08 00:11:58 ilyas
++ * Added definition for AnnexL status
++ *
++ * Revision 1.268 2004/12/18 00:52:35 mprahlad
++ * Add Dig US Pwr cutback status
++ *
++ * Revision 1.267 2004/11/08 22:21:38 ytan
++ * init swap state after retrain
++ *
++ * Revision 1.266 2004/11/05 21:16:50 ilyas
++ * Added support for pwmSyncClock
++ *
++ * Revision 1.265 2004/10/28 20:05:17 gsyu
++ * Fixed compilation errors for simulation targets
++ *
++ * Revision 1.264 2004/10/23 00:16:35 nino
++ * Added kDslHardwareSetRcvAGC status to set absolute rcv agc gain.
++ *
++ * Revision 1.263 2004/10/22 21:21:06 ilyas
++ * Fixed bit definition overlap in demodCapabilities
++ *
++ * Revision 1.262 2004/10/20 00:43:20 gsyu
++ * Added constants to support new xmt sample buffer control scheme
++ *
++ * Revision 1.261 2004/10/12 01:09:28 nino
++ * Remove kDslHardwareEnablePwmSyncClk and kDslHardwareSetPwmSyncClkFreq
++ * status definitions. Add kDslEnablePwmSyncClk and kDslSetPwmSyncClkFreq
++ * command definitions.
++ *
++ * Revision 1.260 2004/10/11 20:21:26 nino
++ * Added kDslHardwareEnablePwmSyncClk and kDslHardwareSetPwmSynClkFreq hardware statuses.
++ *
++ * Revision 1.259 2004/10/07 19:17:29 nino
++ * Added kDslHardwareGetRcvAGC status.
++ *
++ * Revision 1.258 2004/10/02 00:17:14 nino
++ * Added kDslHardwareAGCSetPga2 and kDslSetPilotEyeDisplay status definitions.
++ *
++ * Revision 1.257 2004/08/27 01:00:30 mprahlad
++ *
++ * Keep kDslAtuChangeTxFilterRequest defined by default so ADSL1 only targets can
++ * build
++ *
++ * Revision 1.256 2004/08/20 19:00:34 ilyas
++ * Added power management code for 2+
++ *
++ * Revision 1.255 2004/08/17 23:18:25 kdu
++ * Merged interop changes for TDC lab from a023e9.
++ *
++ * Revision 1.254 2004/07/22 00:56:03 yongbing
++ * Add ADSL2 Annex B modulation definition
++ *
++ * Revision 1.253 2004/07/16 22:23:28 nino
++ * - Defined macros to extract subcarrier and supported set information
++ * for tssi. Subcarrier and suported set indicator is packed into
++ * dsSubcarrier index array.
++ *
++ * Revision 1.252 2004/07/01 00:11:22 nino
++ * Added preliminary code for debugDataHandler (inside of #if DEBUG_DATA_HANDLER).
++ *
++ * Revision 1.251 2004/06/24 03:08:39 ilyas
++ * Added GFC mapping control for ATM bonding
++ *
++ * Revision 1.250 2004/06/23 00:03:20 khp
++ * - shorten self test result register length to 1 (satisfied requirement
++ * at DT, no known requirement anywhere else)
++ *
++ * Revision 1.249 2004/06/15 20:18:33 ilyas
++ * Made D uchar again for compatibility with older ADSl drivers that use this structure. ADSL driver will rely on G992p3 parameters for large D
++ *
++ * Revision 1.248 2004/06/12 00:26:03 gsyu
++ * Added constants for AnnexM
++ *
++ * Revision 1.247 2004/06/10 18:53:24 yjchen
++ * add large D support
++ *
++ * Revision 1.246 2004/06/04 01:55:00 linyin
++ * Add a constant for SRA enable/disable
++ *
++ * Revision 1.245 2004/05/19 23:22:23 linyin
++ * Support L2
++ *
++ * Revision 1.244 2004/05/15 03:04:58 ilyas
++ * Added L3 test definition
++ *
++ * Revision 1.243 2004/05/14 03:04:38 ilyas
++ * Fixed structure name typo
++ *
++ * Revision 1.242 2004/05/14 02:01:01 ilyas
++ * Fixed structure name typo
++ *
++ * Revision 1.241 2004/05/14 01:21:49 nino
++ * Added kDslSignalAttenuation, kDslAttainableNetDataRate kDslHLinScale constant definitions.
++ *
++ * Revision 1.240 2004/05/13 19:07:58 ilyas
++ * Added new statuses for ADSL2
++ *
++ * Revision 1.239 2004/05/01 01:09:51 ilyas
++ * Added power management command and statuses
++ *
++ * Revision 1.238 2004/04/23 22:50:38 ilyas
++ * Implemented double buffering to ensure G.997 HDLC frame (OvhMsg) is continuous
++ *
++ * Revision 1.237 2004/03/31 18:57:39 ilyas
++ * Added drop on data error capability control
++ *
++ * Revision 1.236 2004/03/30 03:11:30 ilyas
++ * Added #ifdef for CFE build
++ *
++ * Revision 1.235 2004/03/29 23:06:39 ilyas
++ * Added status for BG table update
++ *
++ * Revision 1.234 2004/03/17 02:49:49 ilyas
++ * Turn off ATM bit reversal for Alcatel DSLAM only
++ *
++ * Revision 1.233 2004/03/11 03:09:48 mprahlad
++ * Add test mode for afeloopback test
++ *
++ * Revision 1.232 2004/03/10 23:15:53 ilyas
++ * Added ETSI modem support
++ *
++ * Revision 1.231 2004/03/04 19:28:14 linyin
++ * Support adsl2plus
++ *
++ * Revision 1.230 2004/02/28 00:06:21 ilyas
++ * Added OLR message definitions for ADSL2+
++ *
++ * Revision 1.229 2004/02/13 03:21:15 mprahlad
++ * define kDslAturHwAgcMaxGain correctly for 6348
++ *
++ * Revision 1.228 2004/02/09 05:06:17 yongbing
++ * Add ADSL2 bit swap function
++ *
++ * Revision 1.227 2004/02/04 02:08:19 linyin
++ * remove the redefined kG992p5AnnexA
++ *
++ * Revision 1.226 2004/02/04 01:41:48 linyin
++ * Add some variables for G992P5
++ *
++ * Revision 1.225 2004/02/03 19:12:22 gsyu
++ * Added a dedicate structure and constants for G992P5
++ *
++ * Revision 1.224 2004/01/24 01:18:34 ytan
++ * add multi-section swapping flag
++ *
++ * Revision 1.223 2004/01/17 00:21:48 ilyas
++ * Added commands and statuses for OLR
++ *
++ * Revision 1.222 2004/01/13 19:12:37 gsyu
++ * Added more constants for Double upstream
++ *
++ * Revision 1.221 2003/12/23 21:19:04 mprahlad
++ * Define BCM6348_TEMP_MOVE_TO_LMEM to FAST_TEXT for 6348 targets - this is for
++ * ADSL2/AnnexA multimode builds - move a few functions to Lmem for now to avoid
++ * changes for swap on 6348.
++ *
++ * Revision 1.220 2003/12/19 21:21:53 ilyas
++ * Added dying gasp support for ADSL2
++ *
++ * Revision 1.219 2003/12/05 02:09:51 mprahlad
++ * Leave the AnalogEC defs in - saves ifdef-ing all uses of these defines.
++ * Include Bcm6345_To_Bcm6348.h - to be able to pick up macros for the
++ * transition
++ *
++ * Revision 1.218 2003/12/04 02:10:58 linyin
++ * Redefine some constants for supporting different pilot and TTR
++ *
++ * Revision 1.217 2003/12/03 02:24:39 gsyu
++ * Reverse previous check in for Double Upstream demo
++ *
++ * Revision 1.215 2003/11/20 00:58:47 yongbing
++ * Merge ADSL2 functionalities into Annex A branch
++ *
++ * Revision 1.214 2003/11/06 00:35:06 nino
++ * Added kDslWriteAfeRegCmd and kDslReadAfeRegCmd commands.
++ *
++ * Revision 1.213 2003/11/05 21:04:23 ilyas
++ * Added more codes for LOG data
++ *
++ * Revision 1.212 2003/10/22 00:51:52 yjchen
++ * define constant for quiet line noise
++ *
++ * Revision 1.211 2003/10/20 22:08:57 nino
++ * Added kDslSetRcvGainCmd and kDslBypassRcvHpfCmd debug commands.
++ *
++ * Revision 1.210 2003/10/18 00:04:59 yjchen
++ * define constants for G992P3 diagnostic mode channel response
++ *
++ * Revision 1.209 2003/10/17 22:41:29 yongbing
++ * Add INP message support
++ *
++ * Revision 1.208 2003/10/16 00:06:09 uid1249
++ * Moved G.994 definitions from G.994p1MainTypes.h
++ *
++ * Revision 1.207 2003/10/15 20:45:11 linyin
++ * Add some constants for support Revision 2
++ *
++ * Revision 1.206 2003/10/14 22:04:02 ilyas
++ * Added Nino's AFE statuses for 6348
++ *
++ * Revision 1.205 2003/10/10 18:49:26 gsyu
++ * Added test modes to workaround the clock domain crossing bug, PR18038
++ *
++ * Revision 1.204 2003/09/30 19:27:46 mprahlad
++ * ifdef AnalogEC definies with #ifndef BCM6348_SRC
++ *
++ * Revision 1.203 2003/09/26 19:36:34 linyin
++ * Add annexi constant and vars
++ *
++ * Revision 1.202 2003/09/25 20:16:13 yjchen
++ * remove featureNTR definition
++ *
++ * Revision 1.201 2003/09/08 20:29:51 ilyas
++ * Added test commands for chip regression tests
++ *
++ * Revision 1.200 2003/08/26 00:58:14 ilyas
++ * Added I432 reset command (for header compression)
++ * Fixed SoftDsl time (for I432 header compression)
++ *
++ * Revision 1.199 2003/08/26 00:37:29 ilyas
++ * #ifdef'ed DslFrameFunctions in dslCommand structure to save space
++ *
++ * Revision 1.198 2003/08/22 22:45:00 liang
++ * Change the NF field in G992CodingParams from uchar to ushort to support K=256 (dataRate=255*32kbps) in fast path.
++ *
++ * Revision 1.197 2003/08/21 21:19:05 ilyas
++ * Changed dataPumpCapabilities structure for G992P3
++ *
++ * Revision 1.196 2003/08/12 22:44:28 khp
++ * - for Haixiang: added kDslTestMarginTweak command and marginTweakSpec
++ *
++ * Revision 1.195 2003/07/24 17:28:16 ovandewi
++ * added Tx filter change request code
++ *
++ * Revision 1.194 2003/07/24 15:48:55 yongbing
++ * Reduce TSSI buffer size to avoid crash at the beginning of G.994.1. Need to find out why
++ *
++ * Revision 1.193 2003/07/19 07:11:47 nino
++ * Revert back to version 1.191.
++ *
++ * Revision 1.191 2003/07/17 21:25:25 yongbing
++ * Add support for READSL2 and TSSI
++ *
++ * Revision 1.190 2003/07/14 19:42:33 yjchen
++ * add constants for G992P3
++ *
++ * Revision 1.189 2003/07/10 23:07:11 liang
++ * Add demodCapability bit to minimize showtime ATUC xmt power through b&g table.
++ *
++ * Revision 1.188 2003/07/08 22:18:50 liang
++ * Added demodCapability bit for G.994.1 Annex A multimode operation.
++ *
++ * Revision 1.187 2003/07/07 23:24:43 ilyas
++ * Added G.dmt.bis definitions
++ *
++ * Revision 1.186 2003/06/25 02:44:02 liang
++ * Added demod capability bit kDslUE9000ADI918FECFixEnabled.
++ * Added back kDslHWEnableAnalogECUpdate & kDslHWEnableAnalogEC for backward compatibility (annex A).
++ *
++ * Revision 1.185 2003/06/18 01:39:19 ilyas
++ * Added AFE test commands. Add #defines for driver's builds
++ *
++ * Revision 1.184 2003/06/06 23:58:09 ilyas
++ * Added command and status for standalone AFE tests
++ *
++ * Revision 1.183 2003/05/29 21:09:32 nino
++ * - kDslHWEnableAnalogECUpdate define replaced with kDslHWSetDigitalEcUpdateMode
++ * - kDslHWEnableAnalogEC define replaced with kDslHWDisableDigitalECUpdate
++ *
++ * Revision 1.182 2003/04/15 22:08:15 liang
++ * Changed one of the demodCapability bit name from last checkin.
++ *
++ * Revision 1.181 2003/04/13 19:25:54 liang
++ * Added three more demodCapability bits.
++ *
++ * Revision 1.180 2003/04/02 02:09:17 liang
++ * Added demodCapability bit for ADI low rate option fix disable.
++ *
++ * Revision 1.179 2003/03/18 18:22:06 yongbing
++ * Use 32 tap TEQ for Annex I
++ *
++ * Revision 1.178 2003/03/06 00:58:07 ilyas
++ * Added SetStausBuffer command
++ *
++ * Revision 1.177 2003/02/25 00:46:26 ilyas
++ * Added T1.413 EOC vendor ID
++ *
++ * Revision 1.176 2003/02/21 23:30:54 ilyas
++ * Added Xmtgain command framing mode status and T1413VendorId parameters
++ *
++ * Revision 1.175 2003/02/07 22:13:55 liang
++ * Add demodCapabilities bits for sub-sample alignment and higher T1.413 level (used internally only).
++ *
++ * Revision 1.174 2003/01/23 02:54:07 liang
++ * Added demod capability bit for bitswap enable.
++ *
++ * Revision 1.173 2002/12/13 18:36:33 yongbing
++ * Add support for G.992.2 Annex C
++ *
++ * Revision 1.172 2002/12/10 23:27:12 ilyas
++ * Extended dslException parameter structure to allow printout from DslDiags
++ *
++ * Revision 1.171 2002/12/06 02:10:19 liang
++ * Moved the T1.413 RAck1/RAck2 switching variables to connection setup structure.
++ * Added/Modified the training progress codes for T1.413 RAck1/RAck2 and upstream 2x IFFT disable.
++ *
++ * Revision 1.170 2002/11/11 00:20:05 liang
++ * Add demod capability constant for internally disabling upstream 2x IFFT in T1.413 mode.
++ *
++ * Revision 1.169 2002/11/06 03:46:19 liang
++ * Add training progress code for upstream 2x IFFT disable.
++ *
++ * Revision 1.168 2002/11/01 01:41:06 ilyas
++ * Added flags for Centillium 4103 workarround
++ *
++ * Revision 1.167 2002/10/26 01:26:11 gsyu
++ * Move SoftDslLineHandler from SDRAM to LMEM
++ *
++ * Revision 1.166 2002/10/20 18:56:20 khp
++ * - for linyin
++ * - #ifdef NEC_NSIF_WORKAROUND:
++ * - add macros to extract NSIF status and fail counter vars
++ *
++ * Revision 1.165 2002/10/14 05:24:35 liang
++ * Add training status code to request alternate xmt filter (for Samsung 6-port ADI918 DSLAMs) to meet KT 2km spec.
++ *
++ * Revision 1.164 2002/10/08 21:44:50 ilyas
++ * Fixed EOC stuffing byte to indicate "no synchronization" action
++ *
++ * Revision 1.163 2002/10/03 19:34:24 ilyas
++ * Added size for EOC serial number register
++ *
++ * Revision 1.162 2002/09/28 02:42:27 yongbing
++ * Add retrain in T1.413 with R-Ack1 tone
++ *
++ * Revision 1.161 2002/09/28 01:23:35 gsyu
++ * Reverse us2xifft change so that we can install new us2xifft on the tree
++ *
++ * Revision 1.160 2002/09/26 23:30:48 yongbing
++ * Add synch symbol detection in Showtime
++ *
++ * Revision 1.159 2002/09/20 23:47:52 khp
++ * - for gsyu: enable 2X IFFT for Annex A (XMT_FFT_SIZE_2X)
++ *
++ * Revision 1.158 2002/09/14 03:26:39 ilyas
++ * Changed far-end RDI reporting
++ *
++ * Revision 1.157 2002/09/13 21:10:54 ilyas
++ * Added reporting of remote modem LOS and RDI.
++ * Moved G992CodingParams definition to SoftDsl.h
++ *
++ * Revision 1.156 2002/09/12 21:07:19 ilyas
++ * Added HEC, OCD and LCD counters
++ *
++ * Revision 1.155 2002/09/09 21:31:30 linyin
++ * Add two constant to support long reach
++ *
++ * Revision 1.154 2002/09/07 01:31:51 ilyas
++ * Added support for OEM parameters
++ *
++ * Revision 1.153 2002/09/04 22:36:14 mprahlad
++ * defines for non standard info added
++ *
++ * Revision 1.152 2002/08/02 21:59:09 liang
++ * Enable G.992.2 carrierInfo in capabitilities when G.992.1 annex A is used for G.992.2.
++ *
++ * Revision 1.151 2002/07/29 20:01:03 ilyas
++ * Added command for Atm VC map table change
++ *
++ * Revision 1.150 2002/07/18 22:30:47 liang
++ * Add xmt power and power cutback related constants.
++ *
++ * Revision 1.149 2002/07/11 01:30:58 ilyas
++ * Changed status for ShowtimeMargin reporting
++ *
++ * Revision 1.148 2002/07/09 19:19:09 ilyas
++ * Added status parameters for ShowtimeSNRMargin info and command to filter
++ * out SNR margin data
++ *
++ * Revision 1.147 2002/06/27 21:50:24 liang
++ * Added test command related demodCapabilities bits.
++ *
++ * Revision 1.146 2002/06/26 21:29:00 liang
++ * Added dsl test cmd structure and showtime margin connection info status.
++ *
++ * Revision 1.145 2002/06/15 05:15:51 ilyas
++ * Added definitions for Ping, Dying Gasp and other test commands
++ *
++ * Revision 1.144 2002/05/30 19:55:15 ilyas
++ * Added status for ADSL PHY MIPS exception
++ * Changed conflicting definition for higher rates (S=1/2)
++ *
++ * Revision 1.143 2002/05/21 23:41:07 yongbing
++ * First check-in of Annex C S=1/2 codes
++ *
++ * Revision 1.142 2002/04/29 22:25:09 georgep
++ * Merge from branch annexC_demo - add status message constants
++ *
++ * Revision 1.141 2002/04/18 19:00:35 ilyas
++ * Added include file for builds in CommEngine environment
++ *
++ * Revision 1.140 2002/04/18 00:18:36 yongbing
++ * Add detailed timeout error messages
++ *
++ * Revision 1.139 2002/04/02 10:03:18 ilyas
++ * Merged BERT from AnnexA branch
++ *
++ * Revision 1.138 2002/03/26 01:42:29 ilyas
++ * Added timeout message constants for annex C
++ *
++ * Revision 1.137 2002/03/22 19:39:22 yongbing
++ * Modify for co-exist of G994P1 and T1P413
++ *
++ * Revision 1.136 2002/03/22 01:19:40 ilyas
++ * Add status message constants for total FEXT Bits, NEXT bits
++ *
++ * Revision 1.135 2002/03/10 22:32:24 liang
++ * Added report constants for LOS recovery and timing tone index.
++ *
++ * Revision 1.134 2002/03/07 22:06:32 georgep
++ * Replace ifdef G992P1 with G992P1_ANNEX_A for annex A variables
++ *
++ * Revision 1.133 2002/02/16 01:08:18 georgep
++ * Add log constant for showtime mse
++ *
++ * Revision 1.132 2002/02/08 04:36:27 ilyas
++ * Added commands for LOG file and fixed Idle mode pointer update
++ *
++ * Revision 1.131 2002/01/24 20:21:30 georgep
++ * Add logging defines, remove fast retrain defines
++ *
++ * Revision 1.130 2002/01/19 23:59:17 ilyas
++ * Added support for LOG and eye data to ADSL core target
++ *
++ * Revision 1.129 2002/01/16 23:43:54 liang
++ * Remove the carriage return character from last checkin.
++ *
++ * Revision 1.128 2002/01/15 22:27:13 ilyas
++ * Added command for ADSL loopback
++ *
++ * Revision 1.127 2002/01/10 07:18:22 ilyas
++ * Added status for printf (mainly for ADSL core debugging)
++ *
++ * Revision 1.126 2001/12/21 22:45:34 ilyas
++ * Added support for ADSL MIB data object
++ *
++ * Revision 1.125 2001/12/13 02:24:22 ilyas
++ * Added G997 (Clear EOC and G997 framer) support
++ *
++ * Revision 1.124 2001/11/30 05:56:31 liang
++ * Merged top of the branch AnnexBDevelopment onto top of the tree.
++ *
++ * Revision 1.123 2001/11/15 19:01:07 yongbing
++ * Modify only T1.413 part to the top of tree based on AnnexBDevelopment branch
++ *
++ * Revision 1.122 2001/10/19 00:12:07 ilyas
++ * Added support for frame oriented (no ATM) data link layer
++ *
++ * Revision 1.121 2001/10/09 22:35:13 ilyas
++ * Added more ATM statistics and OAM support
++ *
++ * Revision 1.105.2.20 2001/11/27 02:32:03 liang
++ * Combine vendor ID, serial #, and version number into SoftModemVersionNumber.c.
++ *
++ * Revision 1.105.2.19 2001/11/21 01:29:14 georgep
++ * Add a status message define for annexC
++ *
++ * Revision 1.105.2.18 2001/11/08 23:26:28 yongbing
++ * Add carrier selection function for Annex A and B
++ *
++ * Revision 1.105.2.17 2001/11/07 22:55:30 liang
++ * Report G992 rcv msg CRC error as what it is instead of time out.
++ *
++ * Revision 1.105.2.16 2001/11/05 19:56:21 liang
++ * Add DC offset info code.
++ *
++ * Revision 1.105.2.15 2001/10/16 00:47:16 yongbing
++ * Add return-to-T1p413 starting point if in error
++ *
++ * Revision 1.105.2.14 2001/10/15 23:14:01 yjchen
++ * remove ADSL_SINGLE_SYMBOL_BLOCK
++ *
++ * Revision 1.105.2.13 2001/10/12 18:07:16 yongbing
++ * Add support for T1.413
++ *
++ * Revision 1.105.2.12 2001/10/04 00:23:52 liang
++ * Add connection info constants for TEQ coef and PSD.
++ *
++ * Revision 1.105.2.11 2001/10/03 01:44:01 liang
++ * Merged with codes from main tree (tag SoftDsl_2_18).
++ *
++ * Revision 1.105.2.10 2001/09/28 22:10:04 liang
++ * Add G994 exchange message status reports.
++ *
++ * Revision 1.105.2.9 2001/09/26 18:08:21 georgep
++ * Send status error message in case features field is not setup properly
++ *
++ * Revision 1.105.2.8 2001/09/05 01:58:13 georgep
++ * Added status message for annexC measured delay
++ *
++ * Revision 1.105.2.7 2001/08/29 00:37:52 georgep
++ * Add log constants for annexC
++ *
++ * Revision 1.105.2.6 2001/08/18 00:01:34 georgep
++ * Add constants for annexC
++ *
++ * Revision 1.105.2.5 2001/08/08 17:33:28 yongbing
++ * Merge with tag SoftDsl_2_17
++ *
++ * Revision 1.120 2001/08/29 02:56:01 ilyas
++ * Added tests for flattening/unflatenning command and statuses (dual mode)
++ *
++ * Revision 1.119 2001/08/28 03:26:32 ilyas
++ * Added support for running host and adsl core parts separately ("dual" mode)
++ *
++ * Revision 1.118 2001/08/16 02:16:10 khp
++ * - mark functions with FAST_TEXT to reduce cycle counts for QPROC targets
++ * (replaces use of LMEM_INSN)
++ *
++ * Revision 1.117 2001/06/18 20:06:35 ilyas
++ * Added forward declaration of dslCommandStruc to avoid gcc warnings
++ *
++ * Revision 1.116 2001/06/18 19:49:36 ilyas
++ * Changes to include support for HOST_ONLY mode
++ *
++ * Revision 1.115 2001/06/01 22:00:33 ilyas
++ * Changed ATM PHY interface to accomodate UTOPIA needs
++ *
++ * Revision 1.114 2001/05/16 06:22:24 liang
++ * Added status reports for xmt & rcv prefix enable position.
++ *
++ * Revision 1.113 2001/05/02 20:34:32 georgep
++ * Added log constants for snr1 calculation
++ *
++ * Revision 1.112 2001/04/25 01:20:11 ilyas
++ *
++ * Don't use DSL frame functions if ATM_LAYER is not defined
++ *
++ * Revision 1.111 2001/04/17 21:13:00 georgep
++ * Define status constant kDslHWSetDigitalEcUpdateShift
++ *
++ * Revision 1.110 2001/04/16 23:38:36 georgep
++ * Add HW AGC constants for ATUR
++ *
++ * Revision 1.109 2001/04/06 23:44:53 georgep
++ * Added status constant for setting up digitalEcGainShift
++ *
++ * Revision 1.108 2001/03/29 05:58:34 liang
++ * Replaced the Aware compatibility codes with automatic detection codes.
++ *
++ * Revision 1.107 2001/03/25 06:11:22 liang
++ * Combined separate loop attenuation status for ATUR & ATUC into one status.
++ * Replace separate hardware AGC info status for ATUR & ATUC into hardware AGC
++ * request status and hardware AGC obtained status.
++ * Use store AGC command to save hardware AGC value instead of returning value
++ * from status report.
++ *
++ * Revision 1.106 2001/03/24 00:43:22 liang
++ * Report more checksum results (NumOfCalls, txSignal, rxSignal & eyeData).
++ *
++ * Revision 1.105 2001/03/16 23:57:31 georgep
++ * Added more loop attenuation reporting status constants
++ *
++ * Revision 1.104 2001/03/15 00:22:07 liang
++ * Back to version 1.101.
++ *
++ * Revision 1.103 2001/03/15 00:03:44 yjchen
++ * use kDslATURHardwareAGCInfo for AltoE14 AGC as well
++ *
++ * Revision 1.102 2001/03/14 23:10:56 yjchen
++ * add defns for AltoE14 AGC
++ *
++ * Revision 1.101 2001/03/08 23:31:34 georgep
++ * Added R, S, D, coding parameters to dslDataPumpCapabilities
++ *
++ * Revision 1.100 2001/02/10 03:03:09 ilyas
++ * Added one more DslFrame function
++ *
++ * Revision 1.99 2001/02/09 01:55:27 ilyas
++ * Added status codes and macros to support printing of AAL packets
++ *
++ * Revision 1.98 2001/01/30 23:28:10 georgep
++ * Added kDslDspControlStatus for handling changes to dsp params
++ *
++ * Revision 1.97 2001/01/12 01:17:18 georgep
++ * Added bit in demodCapabilities for analog echo cancellor
++ *
++ * Revision 1.96 2001/01/04 05:51:03 ilyas
++ * Added more dslStatuses
++ *
++ * Revision 1.95 2000/12/21 05:46:07 ilyas
++ * Added name for struct _dslFrame
++ *
++ * Revision 1.94 2000/12/13 22:04:39 liang
++ * Add Reed-Solomon coding enable bit in demodCapabilities.
++ *
++ * Revision 1.93 2000/11/29 20:42:02 liang
++ * Add defines for SNR & max achivable rate status and DEC enable demodCapabilities bit.
++ *
++ * Revision 1.92 2000/09/22 21:55:13 ilyas
++ * Added support for DSL + Atm physical layer only (I.432) simulations
++ *
++ * Revision 1.91 2000/09/10 09:20:53 lkaplan
++ * Improve interface for sending Eoc messages
++ *
++ * Revision 1.90 2000/09/08 19:37:58 lkaplan
++ * Added code for handling EOC messages
++ *
++ * Revision 1.89 2000/09/07 23:02:27 georgep
++ * Add HarwareAGC Bit to demod Capabilities
++ *
++ * Revision 1.88 2000/09/01 00:57:34 georgep
++ * Added Hardware AGC status defines
++ *
++ * Revision 1.87 2000/08/31 19:04:26 liang
++ * Added external reference for stack size requirement test functions.
++ *
++ * Revision 1.86 2000/08/24 23:16:46 liang
++ * Increased sample block size for noBlock.
++ *
++ * Revision 1.85 2000/08/23 18:34:39 ilyas
++ * Added XxxVcConfigure function
++ *
++ * Revision 1.84 2000/08/05 00:25:04 georgep
++ * Redefine sampling freq constants
++ *
++ * Revision 1.83 2000/08/03 14:04:00 liang
++ * Add hardware time tracking clock error reset code.
++ *
++ * Revision 1.82 2000/07/23 20:52:52 ilyas
++ * Added xxxFrameBufSetAddress() function for ATM framer layers
++ * Rearranged linkLayer functions in one structure which is passed as a
++ * parameter to xxxLinkLayerInit() function to be set there
++ *
++ * Revision 1.81 2000/07/18 20:03:24 ilyas
++ * Changed DslFrame functions definitions to macros,
++ * Removed gDslVars from their parameter list
++ *
++ * Revision 1.80 2000/07/17 21:08:15 lkaplan
++ * removed global pointer
++ *
++ * Revision 1.79 2000/06/21 20:38:44 georgep
++ * Added bit to demodCapabilities for HW_TIME_TRACKING
++ *
++ * Revision 1.78 2000/06/19 19:57:55 georgep
++ * Added constants for logging of HWResampler data
++ *
++ * Revision 1.77 2000/06/02 18:57:21 ilyas
++ * Added support for DSL buffers consisting of many ATM cells
++ *
++ * Revision 1.76 2000/05/27 02:19:28 liang
++ * G992MonitorParams structure is moved here, and Tx/Rx data handler type definitions changed.
++ *
++ * Revision 1.75 2000/05/15 18:17:21 liang
++ * Added statuses for sent and received frames
++ *
++ * Revision 1.74 2000/05/14 01:56:38 ilyas
++ * Added ATM cell printouts
++ *
++ * Revision 1.73 2000/05/09 23:00:26 ilyas
++ * Added ATM status messages, ATM timer, Tx frames flush on timeout
++ * Fixed a bug - adding flushed Tx frames to the list of free Rx frames
++ *
++ * Revision 1.72 2000/05/03 18:01:18 georgep
++ * Removed old function declarations for Eoc/Aoc
++ *
++ * Revision 1.71 2000/05/03 03:57:04 ilyas
++ * Added LOG file support for writing ATM data
++ *
++ * Revision 1.70 2000/05/02 00:04:36 liang
++ * Add showtime monitoring and message exchange info constants.
++ *
++ * Revision 1.69 2000/04/28 23:34:20 yongbing
++ * Add constants for reporting error events in performance monitoring
++ *
++ * Revision 1.68 2000/04/21 23:09:04 liang
++ * Added G992 time out training progress constant.
++ *
++ * Revision 1.67 2000/04/19 00:31:47 ilyas
++ * Added global SoftDsl functions for Vc, added OOB info functions
++ *
++ * Revision 1.66 2000/04/18 00:45:31 yongbing
++ * Add G.DMT new frame structure, define G992P1_NEWFRAME to enable, need ATM layer to work
++ *
++ * Revision 1.65 2000/04/15 01:48:34 georgep
++ * Added T1p413 status constants
++ *
++ * Revision 1.64 2000/04/13 08:36:22 yura
++ * Added SoftDslSetRefData, SoftDslGetRefData functions
++ *
++ * Revision 1.63 2000/04/13 05:42:35 georgep
++ * Added constant for T1p413
++ *
++ * Revision 1.62 2000/04/05 21:49:54 liang
++ * minor change.
++ *
++ * Revision 1.61 2000/04/04 04:16:06 liang
++ * Merged with SoftDsl_0_03 from old tree.
++ *
++ * Revision 1.65 2000/04/04 01:47:21 ilyas
++ * Implemented abstract dslFrame and dslFrameBuffer objects
++ *
++ * Revision 1.64 2000/04/01 08:12:10 yura
++ * Added preliminary revision of the SoftDsl driver architecture
++ *
++ * Revision 1.63 2000/04/01 02:55:33 georgep
++ * New defines for G992p2Profile Structure
++ *
++ * Revision 1.62 2000/04/01 00:50:36 yongbing
++ * Add initial version of new frame structure for full-rate
++ *
++ * Revision 1.61 2000/03/24 03:30:45 georgep
++ * Define new constant kDslUpstreamSamplingFreq
++ *
++ * Revision 1.60 2000/03/23 19:51:30 georgep
++ * Define new features bits for G992p1
++ *
++ * Revision 1.59 2000/03/18 01:28:41 georgep
++ * Changed connectionSetup to include G992p1 Capabilities
++ *
++ * Revision 1.58 2000/02/29 01:40:03 georgep
++ * Changed modulationtype defines to be the same as SPAR1 in G994p1
++ *
++ * Revision 1.57 1999/11/19 01:03:19 george
++ * Use Block Size 256 for single symbol Mode
++ *
++ * Revision 1.56 1999/11/18 02:37:43 george
++ * Porting to 16Bit
++ *
++ * Revision 1.55 1999/11/12 02:12:55 george
++ * Added status constant for reporting of profile channel matching calculation
++ *
++ * Revision 1.54 1999/11/11 19:19:42 george
++ * Porting to 16Bit Compiler
++ *
++ * Revision 1.53 1999/11/05 01:27:06 liang
++ * Add recovery-from-inpulse-noise progress report.
++ *
++ * Revision 1.52 1999/11/02 02:06:27 george
++ * Added SNRMargin training status value
++ *
++ * Revision 1.51 1999/10/27 23:02:03 wan
++ * Add G.994.1 setup in dslConnectionSetupStruct for setting up Initiation side
++ *
++ * Revision 1.50 1999/10/25 21:55:36 liang
++ * Renamed the constant for FEQ output error.
++ *
++ * Revision 1.49 1999/10/23 02:20:55 george
++ * Add debug data codes
++ *
++ * Revision 1.48 1999/10/19 23:59:06 liang
++ * Change line handler interface to work with nonsymmetric sampling freq.
++ *
++ * Revision 1.47 1999/10/09 01:38:04 george
++ * Define maxProfileNumber
++ *
++ * Revision 1.46 1999/10/07 23:30:51 wan
++ * Add G.994.1 Tone and Fast Retrain Recov detections in G.992p2 SHOWTIME and Fast Retrain
++ *
++ * Revision 1.45 1999/10/06 13:59:27 liang
++ * Escape to G994.1 should be done through status instead of command.
++ *
++ * Revision 1.44 1999/10/06 02:01:28 george
++ * Add kDslReturnToG994p1Cmd
++ *
++ * Revision 1.43 1999/09/30 19:29:58 george
++ * Add reporting constant for Fast Retrain
++ *
++ * Revision 1.42 1999/09/16 23:41:56 liang
++ * Added command for host forced retrain.
++ *
++ * Revision 1.41 1999/08/20 00:47:25 wan
++ * Add constants for Fast Retrain progress status
++ *
++ * Revision 1.40 1999/08/16 18:06:01 wan
++ * Add more reporting constants for Fast Retrain
++ *
++ * Revision 1.39 1999/08/12 00:18:10 wan
++ * Add several Fast Retrain Status constants
++ *
++ * Revision 1.38 1999/08/10 18:25:38 george
++ * Define constants used for Fast Retrain
++ *
++ * Revision 1.37 1999/07/31 01:47:43 george
++ * Add status constants for eoc/aoc
++ *
++ * Revision 1.36 1999/07/27 18:19:52 george
++ * declare aoc/eoc functions
++ *
++ * Revision 1.35 1999/07/19 22:44:47 george
++ * Add constants for G994p1 Message Exchange
++ *
++ * Revision 1.34 1999/07/16 02:03:03 liang
++ * Modified Dsl link layer command spec structure.
++ *
++ * Revision 1.33 1999/07/14 22:53:16 george
++ * Add Constants for G994p1
++ *
++ * Revision 1.32 1999/07/13 00:02:26 liang
++ * Added more feature bits.
++ *
++ * Revision 1.31 1999/07/09 01:58:14 wan
++ * Added more constants G.994.1 testing reports
++ *
++ * Revision 1.30 1999/07/07 23:51:04 liang
++ * Added rcv power and loop attenuation reports.
++ *
++ * Revision 1.29 1999/07/06 21:32:01 liang
++ * Added some aux. feature bits, and field performanceMargin was changed to noiseMargin in Capabilities.
++ *
++ * Revision 1.28 1999/07/03 01:40:17 liang
++ * Redefined dsl command parameter list and added connection setup struct.
++ *
++ * Revision 1.27 1999/07/02 00:41:18 liang
++ * Add bit and gain logging as well as rcv carrier range status.
++ *
++ * Revision 1.26 1999/06/25 21:37:10 wan
++ * Work in progress for G994.1.
++ *
++ * Revision 1.25 1999/06/16 00:54:36 liang
++ * Added Tx/Rx SHOWTIME active training progress codes.
++ *
++ * Revision 1.24 1999/06/11 21:59:37 wan
++ * Added G994.1 fail status constant.
++ *
++ * Revision 1.23 1999/06/11 21:29:01 liang
++ * Constants for C/R-Msgs was changed to C/R-Msg.
++ *
++ * Revision 1.22 1999/06/08 02:49:42 liang
++ * Added SNR data logging.
++ *
++ * Revision 1.21 1999/06/07 21:05:08 liang
++ * Added more training status values.
++ *
++ * Revision 1.20 1999/05/22 02:18:26 liang
++ * More constant defines.
++ *
++ * Revision 1.19 1999/05/14 22:49:35 liang
++ * Added more status codes and debug data codes.
++ *
++ * Revision 1.18 1999/04/12 22:41:39 liang
++ * Work in progress.
++ *
++ * Revision 1.17 1999/04/01 20:28:07 liang
++ * Added RReverb detect event status.
++ *
++ * Revision 1.16 1999/03/26 03:29:54 liang
++ * Add DSL debug data constants.
++ *
++ * Revision 1.15 1999/03/08 21:58:00 liang
++ * Added more constant definitions.
++ *
++ * Revision 1.14 1999/03/02 01:49:36 liang
++ * Added more connection info codes.
++ *
++ * Revision 1.13 1999/03/02 00:25:55 liang
++ * Added DSL tx and rx data handler type definitions.
++ *
++ * Revision 1.12 1999/02/27 01:16:55 liang
++ * Increase allowable static memory size to a VERY large number for now.
++ *
++ * Revision 1.11 1999/02/25 00:24:06 liang
++ * Increased symbol block size to 16.
++ *
++ * Revision 1.10 1999/02/23 22:03:26 liang
++ * Increased maximal static memory size allowed.
++ *
++ * Revision 1.9 1999/02/17 02:39:21 ilyas
++ * Changes for NDIS
++ *
++ * Revision 1.8 1999/02/11 22:44:30 ilyas
++ * More definitions for ATM
++ *
++ * Revision 1.7 1999/02/10 01:56:38 liang
++ * Added hooks for G994.1 and G992.2.
++ *
++ *
++ *****************************************************************************/
++
++#ifndef SoftDslHeader
++#define SoftDslHeader
++
++/* for builds in Linux/VxWorks CommEngine environment */
++#if (defined(__KERNEL__) && !defined(LINUX_DRIVER)) || defined(VXWORKS) || defined(_WIN32_WCE) || defined(TARG_OS_RTEMS) || defined(_CFE_)
++#include "AdslCoreDefs.h"
++#else
++#include "Bcm6345_To_Bcm6348.h" /* File for 45->48 changes */
++#endif
++
++#ifndef SoftModemPh
++#include "SoftModem.h"
++#endif
++
++#ifdef DSL_OS
++#include "DslOs.h"
++#endif
++
++/*
++**
++** Type definitions
++**
++*/
++
++#if defined(ATM) || defined(DSL_PACKET)
++#define DSL_LINKLAYER
++#endif
++
++#if defined(ATM_LAYER) || defined(DSL_PACKET_LAYER) || defined(G997_1_FRAMER)
++#define DSL_FRAME_FUNCTIONS
++#endif
++
++#define FLD_OFFSET(type,fld) ((int)(void *)&(((type *)0)->fld))
++
++#include "Que.h"
++#include "SoftAtmVc.h"
++
++typedef struct _dslFrameBuffer
++ {
++ struct _dslFrameBuffer *next; /* link to the next buffer in the frame */
++ void *pData; /* pointer to data */
++ ulong length; /* size (in bytes) of data */
++ } dslFrameBuffer;
++
++typedef struct _dslFrame
++ {
++ ulong Reserved[3];
++
++ ulong totalLength; /* total amount of data in the packet */
++ int bufCnt; /* buffer counter */
++ struct _dslFrameBuffer *head; /* first buffer in the chain */
++ struct _dslFrameBuffer *tail; /* last buffer in the chain */
++ } dslFrame;
++
++
++/* VC types and parameters */
++
++#define kDslVcAtm 1
++
++typedef struct
++ {
++ ulong vcType;
++ union
++ {
++ atmVcParams atmParams;
++ } params;
++ } dslVcParams;
++
++/*
++** Assuming that dslVcParams.params is the first field in VC
++** and RefData is the first field in dslVcParams.params
++*/
++
++#define DslVcGetRefData(pVc) (*(void **) (pVc))
++
++/* Frame OOB types */
++
++#define kDslFrameAtm 1
++
++typedef struct
++ {
++ ulong frameType;
++ union
++ {
++ atmOobPacketInfo atmInfo;
++ } param;
++ } dslOobFrameInfo;
++
++
++typedef struct
++ {
++ ulong (SM_DECL *__DslFrameBufferGetLength) (dslFrameBuffer *fb);
++ void * (SM_DECL *__DslFrameBufferGetAddress) (dslFrameBuffer *fb);
++ void (SM_DECL *__DslFrameBufferSetLength) (dslFrameBuffer *fb, ulong l);
++ void (SM_DECL *__DslFrameBufferSetAddress) (dslFrameBuffer *fb, void *p);
++
++ void (SM_DECL *__DslFrameInit) (dslFrame *f);
++ ulong (SM_DECL *__DslFrameGetLength) (dslFrame *pFrame);
++ ulong (SM_DECL *__DslFrameGetBufCnt) (dslFrame *pFrame);
++ dslFrameBuffer * (SM_DECL *__DslFrameGetFirstBuffer) (dslFrame *pFrame);
++ dslFrameBuffer * (SM_DECL *__DslFrameGetNextBuffer) (dslFrameBuffer *pFrBuffer);
++ void (SM_DECL *__DslFrameSetNextBuffer) (dslFrameBuffer *pFrBuf, dslFrameBuffer *pFrBufNext);
++ dslFrameBuffer * (SM_DECL *__DslFrameGetLastBuffer) (dslFrame *pFrame);
++ void * (SM_DECL *__DslFrameGetLinkFieldAddress) (dslFrame *f);
++ dslFrame * (SM_DECL *__DslFrameGetFrameAddressFromLink) (void *lnk);
++
++ Boolean (SM_DECL *__DslFrameGetOobInfo) (dslFrame *f, dslOobFrameInfo *pOobInfo);
++ Boolean (SM_DECL *__DslFrameSetOobInfo) (dslFrame *f, dslOobFrameInfo *pOobInfo);
++
++ void (SM_DECL *__DslFrameEnqueBufferAtBack) (dslFrame *f, dslFrameBuffer *b);
++ void (SM_DECL *__DslFrameEnqueFrameAtBack) (dslFrame *fMain, dslFrame *f);
++ void (SM_DECL *__DslFrameEnqueBufferAtFront) (dslFrame *f, dslFrameBuffer *b);
++ void (SM_DECL *__DslFrameEnqueFrameAtFront) (dslFrame *fMain, dslFrame *f);
++ dslFrameBuffer * (SM_DECL *__DslFrameDequeBuffer) (dslFrame *pFrame);
++
++ void * (SM_DECL *__DslFrameAllocMemForFrames) (ulong frameNum);
++ void (SM_DECL *__DslFrameFreeMemForFrames) (void *hMem);
++ dslFrame * (SM_DECL *__DslFrameAllocFrame) (void *handle);
++ void (SM_DECL *__DslFrameFreeFrame) (void *handle, dslFrame *pFrame);
++ void * (SM_DECL *__DslFrameAllocMemForBuffers) (void **ppMemPool, ulong bufNum, ulong memSize);
++ void (SM_DECL *__DslFrameFreeMemForBuffers) (void *hMem, ulong memSize, void *pMemPool);
++ dslFrameBuffer * (SM_DECL *__DslFrameAllocBuffer) (void *handle, void *pMem, ulong length);
++ void (SM_DECL *__DslFrameFreeBuffer) (void *handle, dslFrameBuffer *pBuf);
++
++ /* for LOG file support */
++
++ ulong (SM_DECL *__DslFrame2Id)(void *handle, dslFrame *pFrame);
++ void * (SM_DECL *__DslFrameId2Frame)(void *handle, ulong frameId);
++ } dslFrameFunctions;
++
++#define DslFrameDeclareFunctions( name_prefix ) \
++extern ulong SM_DECL name_prefix##BufferGetLength(dslFrameBuffer *fb); \
++extern void * SM_DECL name_prefix##BufferGetAddress(dslFrameBuffer *fb); \
++extern void SM_DECL name_prefix##BufferSetLength(dslFrameBuffer *fb, ulong l); \
++extern void SM_DECL name_prefix##BufferSetAddress(dslFrameBuffer *fb, void *p); \
++ \
++extern void SM_DECL name_prefix##Init(dslFrame *f); \
++extern ulong SM_DECL name_prefix##GetLength (dslFrame *pFrame); \
++extern ulong SM_DECL name_prefix##GetBufCnt(dslFrame *pFrame); \
++extern dslFrameBuffer * SM_DECL name_prefix##GetFirstBuffer(dslFrame *pFrame); \
++extern dslFrameBuffer * SM_DECL name_prefix##GetNextBuffer(dslFrameBuffer *pFrBuffer); \
++extern void SM_DECL name_prefix##SetNextBuffer(dslFrameBuffer *pFrBuf, dslFrameBuffer *pFrBufNext); \
++extern dslFrameBuffer * SM_DECL name_prefix##GetLastBuffer(dslFrame *pFrame); \
++extern void * SM_DECL name_prefix##GetLinkFieldAddress(dslFrame *f); \
++extern Boolean SM_DECL name_prefix##GetOobInfo(dslFrame *f, dslOobFrameInfo *pOobInfo); \
++extern Boolean SM_DECL name_prefix##SetOobInfo(dslFrame *f, dslOobFrameInfo *pOobInfo); \
++extern dslFrame* SM_DECL name_prefix##GetFrameAddressFromLink(void *lnk); \
++extern void SM_DECL name_prefix##EnqueBufferAtBack(dslFrame *f, dslFrameBuffer *b); \
++extern void SM_DECL name_prefix##EnqueFrameAtBack(dslFrame *fMain, dslFrame *f); \
++extern void SM_DECL name_prefix##EnqueBufferAtFront(dslFrame *f, dslFrameBuffer *b); \
++extern void SM_DECL name_prefix##EnqueFrameAtFront(dslFrame *fMain, dslFrame *f); \
++extern dslFrameBuffer * SM_DECL name_prefix##DequeBuffer(dslFrame *pFrame); \
++ \
++extern void * SM_DECL name_prefix##AllocMemForFrames(ulong frameNum); \
++extern void SM_DECL name_prefix##FreeMemForFrames(void *hMem); \
++extern dslFrame * SM_DECL name_prefix##AllocFrame(void *handle); \
++extern void SM_DECL name_prefix##FreeFrame(void *handle, dslFrame *pFrame); \
++extern void * SM_DECL name_prefix##AllocMemForBuffers(void **ppMemPool, ulong bufNum, ulong memSize); \
++extern void SM_DECL name_prefix##FreeMemForBuffers(void *hMem, ulong memSize, void *pMemPool); \
++extern dslFrameBuffer * SM_DECL name_prefix##AllocBuffer(void *handle, void *pMem, ulong length); \
++extern void SM_DECL name_prefix##FreeBuffer(void *handle, dslFrameBuffer *pBuf); \
++extern ulong SM_DECL name_prefix##2Id(void *handle, dslFrame *pFrame); \
++extern void * SM_DECL name_prefix##Id2Frame(void *handle, ulong frameId);
++
++
++#define DslFrameAssignFunctions( var, name_prefix ) do { \
++ (var).__DslFrameBufferGetLength = name_prefix##BufferGetLength; \
++ (var).__DslFrameBufferGetAddress= name_prefix##BufferGetAddress; \
++ (var).__DslFrameBufferSetLength = name_prefix##BufferSetLength; \
++ (var).__DslFrameBufferSetAddress= name_prefix##BufferSetAddress; \
++ \
++ (var).__DslFrameInit = name_prefix##Init; \
++ (var).__DslFrameGetLength = name_prefix##GetLength; \
++ (var).__DslFrameGetBufCnt = name_prefix##GetBufCnt; \
++ (var).__DslFrameGetFirstBuffer = name_prefix##GetFirstBuffer; \
++ (var).__DslFrameGetNextBuffer = name_prefix##GetNextBuffer; \
++ (var).__DslFrameSetNextBuffer = name_prefix##SetNextBuffer; \
++ (var).__DslFrameGetLastBuffer = name_prefix##GetLastBuffer; \
++ (var).__DslFrameGetLinkFieldAddress = name_prefix##GetLinkFieldAddress; \
++ (var).__DslFrameGetFrameAddressFromLink = name_prefix##GetFrameAddressFromLink; \
++ \
++ (var).__DslFrameGetOobInfo = name_prefix##GetOobInfo; \
++ (var).__DslFrameSetOobInfo = name_prefix##SetOobInfo; \
++ \
++ (var).__DslFrameEnqueBufferAtBack = name_prefix##EnqueBufferAtBack; \
++ (var).__DslFrameEnqueFrameAtBack = name_prefix##EnqueFrameAtBack; \
++ (var).__DslFrameEnqueBufferAtFront= name_prefix##EnqueBufferAtFront; \
++ (var).__DslFrameEnqueFrameAtFront = name_prefix##EnqueFrameAtFront; \
++ (var).__DslFrameDequeBuffer = name_prefix##DequeBuffer; \
++ \
++ (var).__DslFrameAllocMemForFrames = name_prefix##AllocMemForFrames; \
++ (var).__DslFrameFreeMemForFrames = name_prefix##FreeMemForFrames; \
++ (var).__DslFrameAllocFrame = name_prefix##AllocFrame; \
++ (var).__DslFrameFreeFrame = name_prefix##FreeFrame; \
++ (var).__DslFrameAllocMemForBuffers= name_prefix##AllocMemForBuffers; \
++ (var).__DslFrameFreeMemForBuffers = name_prefix##FreeMemForBuffers; \
++ (var).__DslFrameAllocBuffer = name_prefix##AllocBuffer; \
++ (var).__DslFrameFreeBuffer = name_prefix##FreeBuffer; \
++ \
++ (var).__DslFrame2Id = name_prefix##2Id; \
++ (var).__DslFrameId2Frame = name_prefix##Id2Frame; \
++} while (0)
++
++typedef struct
++ {
++ Boolean febe_I;
++ Boolean fecc_I;
++ Boolean los, rdi;
++ Boolean ncd_I;
++ Boolean hec_I;
++#ifdef G992P3
++ Boolean lpr;
++#endif
++
++#ifdef G992P1_NEWFRAME
++
++ Boolean febe_F;
++ Boolean fecc_F;
++ Boolean ncd_F;
++ Boolean hec_F;
++
++#endif
++ } G992MonitorParams;
++
++typedef struct
++ {
++ ushort K;
++ uchar S, R;
++ uchar D;
++#ifdef G992P3
++ uchar T, SEQ;
++#endif
++ directionType direction;
++
++#ifdef G992P1_NEWFRAME
++
++ ushort N;
++ ushort NF;
++ uchar RSF;
++
++ uchar AS0BF, AS1BF, AS2BF, AS3BF, AEXAF;
++ ushort AS0BI;
++ uchar AS1BI, AS2BI, AS3BI, AEXAI;
++
++ uchar LS0CF, LS1BF, LS2BF, LEXLF;
++ uchar LS0CI, LS1BI, LS2BI, LEXLI;
++
++ uchar mergedModeEnabled;
++
++#endif
++
++ } G992CodingParams;
++
++typedef struct
++ {
++ uchar Nlp;
++ uchar Nbc;
++ uchar MSGlp;
++ ushort MSGc;
++
++ ulong L;
++ ushort M;
++ ushort T;
++ ushort D;
++ ushort R;
++ ushort B;
++ } G992p3CodingParams;
++
++/* Power Management Message definitions (used in command and status) */
++
++typedef struct
++ {
++ long msgType;
++ union
++ {
++ long value;
++ struct
++ {
++ long msgLen;
++ void *msgData;
++ } msg;
++ } param;
++ } dslPwrMessage;
++
++/* Power Management commands and responses */
++
++#define kPwrSimpleRequest 1
++#define kPwrL2Request 2
++#define kPwrL2TrimRequest 3
++
++#define kPwrGrant 0x80
++#define kPwrReject 0x81
++#define kPwrL2Grant 0x82
++#define kPwrL2Reject 0x83
++#define kPwrL2TrimGrant 0x84
++#define kPwrL2TrimReject 0x85
++#define kPwrL2Grant2p 0x86
++
++#define kPwrBusy 0x01
++#define kPwrInvalid 0x02
++#define kPwrNotDesired 0x03
++#define kPwrInfeasibleParam 0x04
++
++/* Power Management reason codes */
++
++/* OLR definitions (used in command and status) */
++
++typedef struct
++ {
++ ushort msgType;
++ ushort nCarrs;
++ ushort L[4];
++ uchar B[4];
++ void *carrParamPtr;
++ } dslOLRMessage;
++
++typedef struct
++ {
++ uchar ind;
++ uchar gain;
++ uchar gb;
++ } dslOLRCarrParam;
++
++typedef struct
++ {
++ ushort ind;
++ uchar gain;
++ uchar gb;
++ } dslOLRCarrParam2p;
++
++/* OLR messages */
++
++#define kOLRRequestType1 1
++#define kOLRRequestType2 2
++#define kOLRRequestType3 3
++#define kOLRRequestType4 4
++#define kOLRRequestType5 5
++#define kOLRRequestType6 6
++
++#define kOLRDeferType1 0x81
++#define kOLRRejectType2 0x82
++#define kOLRRejectType3 0x83
++
++/* OLR reason codes */
++
++#define kOLRBusy 1
++#define kOLRInvalidParam 2
++#define kOLRNotEnabled 3
++#define kOLRNotSupported 4
++
++/* common EOC definitions */
++#define kG992EocStuffingByte 0x0C
++
++/* showtime monitor counters */
++#define kG992ShowtimeRSCodewordsRcved 0 /* number of Reed-Solomon codewords received */
++#define kG992ShowtimeRSCodewordsRcvedOK 1 /* number of Reed-Solomon codewords received with all symdromes zero */
++#define kG992ShowtimeRSCodewordsRcvedCorrectable 2 /* number of Reed-Solomon codewords received with correctable errors */
++#define kG992ShowtimeRSCodewordsRcvedUncorrectable 3 /* number of Reed-Solomon codewords received with un-correctable errors */
++#define kG992ShowtimeSuperFramesRcvd 4 /* number of super frames received */
++#define kG992ShowtimeSuperFramesRcvdWrong 5 /* number of super frames received with CRC error */
++#define kG992ShowtimeLastUncorrectableRSCount 6 /* last recorded value for kG992ShowtimeRSCodewordsRcvedUncorrectable */
++#define kG992ShowtimeLastWrongSuperFrameCount 7 /* last recorded value for kG992ShowtimeSuperFramesRcvdWrong */
++#define kG992ShowtimeNumOfShortResync 8 /* number of short interrupt recoveries by FEQ */
++
++#define kG992ShowtimeNumOfFEBE 9 /* number of other side superframe errors */
++#define kG992ShowtimeNumOfFECC 10 /* number of other side superframe FEC errors */
++#define kG992ShowtimeNumOfFHEC 11 /* number of far-end ATM header CRC errors */
++#define kG992ShowtimeNumOfFOCD 12 /* number of far-end OCD events */
++#define kG992ShowtimeNumOfFLCD 13 /* number of far-end LCD events */
++#define kG992ShowtimeNumOfHEC 14 /* number of ATM header CRC errors */
++#define kG992ShowtimeNumOfOCD 15 /* number of OCD events */
++#define kG992ShowtimeNumOfLCD 16 /* number of LCD events */
++
++#define kG992ShowtimeNumOfMonitorCounters (kG992ShowtimeNumOfLCD+1) /* always last number + 1 */
++#define kG992ShowtimeMonitorReportNumber 9
++
++#define kG992ShowtimeLCDNumShift 1
++#define kG992ShowtimeLCDFlag 1
++
++typedef int (SM_DECL *dslFrameHandlerType) (void *gDslVars, void *pVc, ulong mid, dslFrame *);
++
++typedef void* (SM_DECL *dslHeaderHandlerType) (void *gDslVars, ulong hdr, uchar hdrHec);
++typedef void* (SM_DECL *dslTxFrameBufferHandlerType) (void *gDslVars, int*, void*);
++typedef void* (SM_DECL *dslRxFrameBufferHandlerType) (void *gDslVars, int, void*);
++
++typedef void* (SM_DECL *dslVcAllocateHandlerType) (void *gDslVars, void *);
++typedef void (SM_DECL *dslVcFreeHandlerType) (void *gDslVars, void *);
++typedef Boolean (SM_DECL *dslVcActivateHandlerType) (void *gDslVars, void *);
++typedef void (SM_DECL *dslVcDeactivateHandlerType) (void *gDslVars, void *);
++typedef Boolean (SM_DECL *dslVcConfigureHandlerType) (void *gDslVars, void *pVc, ulong mid, void *);
++
++typedef ulong (SM_DECL *dslLinkVc2IdHandlerType) (void *gDslVars, void *);
++typedef void* (SM_DECL *dslLinkVcId2VcHandlerType) (void *gDslVars, ulong);
++typedef void* (SM_DECL *dslGetFramePoolHandlerType) (void *gDslVars);
++
++typedef void (SM_DECL *dslLinkCloseHandlerType) (void *gDslVars);
++typedef int (SM_DECL *dslTxDataHandlerType)(void *gDslVars, int, int, uchar*, G992MonitorParams*);
++typedef int (SM_DECL *dslRxDataHandlerType)(void *gDslVars, int, uchar*, G992MonitorParams*);
++
++typedef void (SM_DECL *dslLinkStatusHandler) (void *gDslVars, ulong statusCode, ...);
++
++typedef Boolean (SM_DECL *dslPhyInitType) (
++ void *gDslVars,
++ bitMap setupMap,
++ dslHeaderHandlerType rxCellHeaderHandlerPtr,
++ dslRxFrameBufferHandlerType rxFrameHandlerPtr,
++ dslTxFrameBufferHandlerType txFrameHandlerPtr,
++ atmStatusHandler statusHandlerPtr);
++
++struct _dslFramerBufDesc;
++
++typedef Boolean (SM_DECL *dslFramerDataGetPtrHandlerType) (void *gDslVars, struct _dslFramerBufDesc *pBufDesc);
++typedef void (SM_DECL *dslFramerDataDoneHandlerType) (void *gDslVars, struct _dslFramerBufDesc *pBufDesc);
++
++typedef void (SM_DECL *dslDriverCallbackType) (void *gDslVars);
++
++#ifdef DSL_PACKET
++
++typedef struct
++ {
++ dslFramerDataGetPtrHandlerType rxDataGetPtrHandler;
++ dslFramerDataDoneHandlerType rxDataDoneHandler;
++ dslFramerDataGetPtrHandlerType txDataGetPtrHandler;
++ dslFramerDataDoneHandlerType txDataDoneHandler;
++ } dslPacketPhyFunctions;
++
++typedef Boolean (SM_DECL *dslPacketPhyInitType) (
++ void *gDslVars,
++ bitMap setupMap,
++ dslPacketPhyFunctions dslPhyFunctions,
++ dslLinkStatusHandler statusHandlerPtr);
++
++
++#endif /* DSL_PACKET */
++
++
++typedef int dslDirectionType;
++typedef bitMap dslModulationType;
++typedef bitMap dslLinkLayerType;
++
++/*
++**
++** Log data codes
++**
++*/
++
++#define kDslEyeData eyeData
++
++#define kDslLogComplete (inputSignalData - 1)
++#define kDslLogInputData inputSignalData
++#define kDslLogInputData1 (inputSignalData + 1)
++#define kDslLogInputData2 (inputSignalData + 2)
++#define kDslLogInputData3 (inputSignalData + 3)
++
++/*
++**
++** Status codes
++**
++*/
++
++typedef long dslStatusCode;
++#define kFirstDslStatusCode 256
++#define kDslError (kFirstDslStatusCode + 0)
++#define kAtmStatus (kFirstDslStatusCode + 1)
++#define kDslTrainingStatus (kFirstDslStatusCode + 2)
++#define kDslConnectInfoStatus (kFirstDslStatusCode + 3)
++#define kDslEscapeToG994p1Status (kFirstDslStatusCode + 4)
++#define kDslFrameStatus (kFirstDslStatusCode + 5)
++#define kDslReceivedEocCommand (kFirstDslStatusCode + 6)
++#define kDslSendEocCommandDone (kFirstDslStatusCode + 7)
++#define kDslSendEocCommandFailed (kFirstDslStatusCode + 8)
++#define kDslWriteRemoteRegisterDone (kFirstDslStatusCode + 9)
++#define kDslReadRemoteRegisterDone (kFirstDslStatusCode + 10)
++#define kDslExternalError (kFirstDslStatusCode + 11)
++#define kDslDspControlStatus (kFirstDslStatusCode + 12)
++#define kDslATUHardwareAGCRequest (kFirstDslStatusCode + 13)
++#define kDslPacketStatus (kFirstDslStatusCode + 14)
++#define kDslG997Status (kFirstDslStatusCode + 15)
++#define kDslPrintfStatus (kFirstDslStatusCode + 16)
++#define kDslPrintfStatus1 (kFirstDslStatusCode + 17)
++#define kDslExceptionStatus (kFirstDslStatusCode + 18)
++#define kDslPingResponse (kFirstDslStatusCode + 19)
++#define kDslShowtimeSNRMarginInfo (kFirstDslStatusCode + 20)
++#define kDslGetOemParameter (kFirstDslStatusCode + 21)
++#define kDslOemDataAddrStatus (kFirstDslStatusCode + 22)
++#define kDslDataAvailStatus (kFirstDslStatusCode + 23)
++/* #define kDslAtuChangeTxFilterRequest (kFirstDslStatusCode + 24) */
++#define kDslTestPllPhaseResult (kFirstDslStatusCode + 25)
++#ifdef BCM6348_SRC
++#define kDslHardwareAGCSetPga1 (kFirstDslStatusCode + 26)
++#define kDslHardwareAGCDecPga1 (kFirstDslStatusCode + 27)
++#define kDslHardwareAGCIncPga1 (kFirstDslStatusCode + 28)
++#define kDslHardwareAGCSetPga2Delta (kFirstDslStatusCode + 29)
++#endif
++#define kDslOLRRequestStatus (kFirstDslStatusCode + 30)
++#define kDslOLRResponseStatus (kFirstDslStatusCode + 31)
++#define kDslOLRBitGainUpdateStatus (kFirstDslStatusCode + 32)
++#define kDslPwrMgrStatus (kFirstDslStatusCode + 33)
++#define kDslEscapeToT1p413Status (kFirstDslStatusCode + 34)
++#ifdef BCM6348_SRC
++#define kDslHardwareAGCSetPga2 (kFirstDslStatusCode + 35)
++#define kDslHardwareGetRcvAGC (kFirstDslStatusCode + 36)
++#endif
++#define kDslUpdateXmtReadPtr (kFirstDslStatusCode + 37)
++#define kDslHardwareSetRcvAGC (kFirstDslStatusCode + 38)
++#ifdef BCM6348_SRC
++#define kDslSetDigUsPwrCutback (kFirstDslStatusCode + 39)
++#endif
++
++#define kClientSideInitiation 0
++#define kClientSideRespond 1
++#define kCentralSideInitiation 2
++#define kCentralSideRespond 3
++
++/* OEM parameter ID definition */
++
++#define kDslOemG994VendorId 1
++#define kDslOemG994XmtNSInfo 2
++#define kDslOemG994RcvNSInfo 3
++#define kDslOemEocVendorId 4
++#define kDslOemEocVersion 5
++#define kDslOemEocSerNum 6
++#define kDslOemT1413VendorId 7
++#define kDslOemT1413EocVendorId 8
++
++typedef long dslErrorCode;
++
++typedef long atmStatusCode;
++typedef long dslFramerStatusCode;
++
++typedef long atmErrorCode;
++
++typedef long dslTrainingStatusCode;
++
++#define kDslStartedG994p1 0
++#define kDslStartedT1p413HS 1
++
++/* reserved for G.994.1: 1 ~ 8 */
++
++#define kDslG994p1MessageDet 100
++#define kDslG994p1ToneDet 101
++#define kDslG994p1RToneDet 102
++#define kDslG994p1FlagDet 103
++#define kDslG994p1GalfDet 104
++#define kDslG994p1ErrorFrameDet 105
++#define kDslG994p1BadFrameDet 106
++#define kDslG994p1SilenceDet 107
++#define kDslG994p1RcvTimeout 108
++#define kDslG994p1XmtFinished 109
++#define kDslG994p1ReturntoStartup 110
++#define kDslG994p1InitiateCleardown 111
++#define kDslG994p1StartupFinished 112
++#define kDslG994p1RcvNonStandardInfo 113
++#define kDslG994p1XmtNonStandardInfo 114
++
++#define kG994p1MaxNonstdMessageLength 64
++
++#define kDslFinishedT1p413 1100
++#define kDslT1p413DetectedCTone 1101
++#define kDslT1p413DetectedCAct 1102
++#define kDslT1p413DetectedCReveille 1103
++#define kDslT1p413DetectedRActReq 1104
++#define kDslT1p413DetectedRQuiet1 1105
++#define kDslT1p413DetectedRAct 1106
++#define kDslT1p413TimeoutCReveille 1107
++#define kDslT1p413ReturntoStartup 1108
++
++#define kDslG994p1Timeout 8
++#define kDslFinishedG994p1 9
++#define kDslStartedG992p2Training 10
++#define kDslG992p2DetectedPilotSymbol 11
++#define kDslG992p2DetectedReverbSymbol 12
++#define kDslG992p2TEQCalculationDone 13
++#define kDslG992p2TrainingFEQ 14
++#define kDslG992p2Phase3Started 15
++#define kDslG992p2ReceivedRates1 16
++#define kDslG992p2ReceivedMsg1 17
++#define kDslG992p2Phase4Started 18
++#define kDslG992p2ReceivedRatesRA 19
++#define kDslG992p2ReceivedMsgRA 20
++#define kDslG992p2ReceivedRates2 21
++#define kDslG992p2ReceivedMsg2 22
++#define kDslG992p2ReceivedBitGainTable 23
++#define kDslG992p2TxShowtimeActive 24
++#define kDslG992p2RxShowtimeActive 25
++#define kDslG992p2TxAocMessage 26
++#define kDslG992p2RxAocMessage 27
++#define kDslG992p2TxEocMessage 28
++#define kDslG992p2RxEocMessage 29
++#define kDslFinishedG992p2Training 30
++#define kDslRecoveredFromImpulseNoise 31
++#define kDslG992Timeout 32
++#define kDslT1p413Isu1SglByteSymDetected 33 /* detected T1.413 Issue 1 single byte per symbol mode */
++#define kDslG992RxPrefixOnInAFewSymbols 34
++#define kDslG992TxPrefixOnInAFewSymbols 35
++#define kDslAnnexCXmtCPilot1Starting 36
++#define kDslXmtToRcvPathDelay 37
++#define kDslFeaturesUnsupported 38
++#define kDslG992RcvMsgCrcError 39
++#define kDslAnnexCDetectedStartHyperframe 40
++
++#define kDslG992AnnexCTimeoutCPilot1Detection 41
++#define kDslG992AnnexCTimeoutCReverb1Detection 42
++#define kDslG992AnnexCTimeoutECTraining 43
++#define kDslG992AnnexCTimeoutHyperframeDetector 44
++#define kDslG992AnnexCTimeoutSendRSegue2 45
++#define kDslG992AnnexCTimeoutDetectCSegue1 46
++#define kDslG992AnnexCAlignmentErrDetected 47
++#define kDslG992AnnexCTimeoutSendRSegueRA 48
++#define kDslG992AnnexCTimeoutSendRSegue4 49
++#define kDslG992AnnexCTimeoutCSegue2Detection 50
++#define kDslG992AnnexCTimeoutCSegue3Detection 51
++/* Progress report for fast retrain */
++
++#define kG994p1EventToneDetected 54
++#define kDslG992p2RcvVerifiedBitAndGain 55
++#define kDslG992p2ProfileChannelResponseCalc 56
++#define kDslG992AnnexCTotalFEXTBits 57
++#define kDslG992AnnexCTotalNEXTBits 58
++#define kDslG992AnnexCTotalFEXTCarrs 59
++#define kDslG992AnnexCTotalNEXTCarrs 60
++
++#define kDslG992p3ReceivedMsgFmt 61
++#define kDslG992p3ReceivedMsgPcb 62
++
++#define kDslG992p3AnnexLMode 63
++
++/* performance monitoring report */
++
++#define kG992DataRcvDetectFastRSCorrection 70
++#define kG992DataRcvDetectInterleaveRSCorrection 71
++#define kG992DataRcvDetectFastCRCError 72
++#define kG992DataRcvDetectInterleaveCRCError 73
++#define kG992DataRcvDetectFastRSError 74
++#define kG992DataRcvDetectInterleaveRSError 75
++#define kG992DataRcvDetectLOS 76
++#define kG992DecoderDetectRDI 77
++#define kG992DataRcvDetectLOSRecovery 78
++#define kG992AtmDetectHEC 79
++#define kG992AtmDetectOCD 180
++#define kG992AtmDetectCD 181
++#define kG992DecoderDetectRemoteLOS 182
++#define kG992DecoderDetectRemoteLOSRecovery 183
++#define kG992DecoderDetectRemoteRDI 184
++#define kG992DecoderDetectRemoteRDIRecovery 185
++#define kG992RcvDetectSyncSymbolOffset 186
++#define kG992Upstream2xIfftDisabled 187
++#if defined(G992P5)
++#define kDslG992RunAnnexaP3ModeInAnnexaP5 188 /* run Annex C mode in Annex I compiled codes */
++#else
++#define kDslG992RunAnnexCModeInAnnexI 188 /* run Annex C mode in Annex I compiled codes */
++#endif
++
++/* OLR PHY status */
++
++#define kG992EventSynchSymbolDetected 189
++#define kG992EventReverseSynchSymbolDetected 190
++#define kG992EventL2CReverbSymbolDetected 191
++#define kG992EventL2CSegueSymbolDetected 192
++
++/* ANNEX_M */
++#define kG992EnableAnnexM 191
++
++#define kDslAtuChangeTxFilterRequest 192
++
++/* detailed error messages reports */
++
++#define kDslG992XmtRReverbRAOver4000 80
++#define kDslG992XmtRReverb5Over4000 81
++#define kDslG992RcvCSegue2Failed 82
++#define kDslG992RcvCSegueRAFailed 83
++#define kDslG992RcvCSegue3Failed 84
++#define kDslG992RcvShowtimeStartedTooLate 85
++#define kDslG992XmtRReverb3Over4000 86
++#define kDslG992RcvFailDetCSegue1InWindow 87
++#define kDslG992RcvCPilot1Failed 88
++#define kDslG992RcvCReverb1Failed 89
++#define kG992ControlAllRateOptionsFailedErr 90
++#define kG992ControlInvalidRateOptionErr 91
++#define kDslG992XmtInvalidXmtDErr 92
++#define kDslG992BitAndGainCalcFailed 93
++#define kDslG992BitAndGainVerifyFailed 94
++
++#define kDslT1p413RetrainToUseCorrectRAck 95
++#define kDslUseAlternateTxFilter 96
++#define kDslT1p413RetrainToUseCorrectIFFT 97
++
++typedef long dslConnectInfoStatusCode;
++#define kG992p2XmtToneOrderingInfo 0
++#define kG992p2RcvToneOrderingInfo 1
++#define kG992p2XmtCodingParamsInfo 2
++#define kG992p2RcvCodingParamsInfo 3
++#define kG992p2TrainingRcvCarrEdgeInfo 4
++#define kG992ShowtimeMonitoringStatus 5
++#define kG992MessageExchangeRcvInfo 6
++#define kG992MessageExchangeXmtInfo 7
++#define kG994MessageExchangeRcvInfo 8
++#define kG994MessageExchangeXmtInfo 9
++
++#define kDslATURClockErrorInfo 10
++#define kDslATURcvPowerInfo 11
++#define kDslATUAvgLoopAttenuationInfo 12
++#define kDslHWTimeTrackingResetClockError 13
++#define kDslHWTimeTrackingClockTweak 14
++#define kDslATUHardwareAGCObtained 15
++#define kDslTEQCoefInfo 16
++#define kDslRcvCarrierSNRInfo 17
++#define kDslMaxReceivableBitRateInfo 18
++#define kDslHWSetDigitalEcUpdateMode 19
++#define kDslHWEnableDigitalECUpdate 20
++#define kDslHWDisableDigitalECUpdate 21
++#define kDslHWEnableDigitalEC 22
++#define kDslHWSetDigitalEcGainShift 23
++#define kDslHWSetDigitalEcUpdateShift 24
++#define kDslRcvPsdInfo 25
++#define kDslHWdcOffsetInfo 26
++#define kG994SelectedG994p1CarrierIndex 27
++#define kDslSelectedTimingTone 28
++
++#define kDslHWEnableAnalogECUpdate kDslHWSetDigitalEcUpdateMode
++#define kDslHWEnableAnalogEC kDslHWDisableDigitalECUpdate
++
++#define kG992AocMessageExchangeRcvInfo 29
++#define kG992AocMessageExchangeXmtInfo 30
++#define kG992AocBitswapTxStarted 31
++#define kG992AocBitswapRxStarted 32
++#define kG992AocBitswapTxCompleted 33
++#define kG992AocBitswapRxCompleted 34
++#define kDslChannelResponseLog 35
++#define kDslChannelResponseLinear 36
++#define kDslChannelQuietLineNoise 37
++
++#define kDslATUCXmtPowerCutbackInfo 40
++#define kDslATURXmtPowerCutbackInfo 41
++#define kDslATUCXmtPowerInfo 42
++#define kDslATURXmtPowerInfo 43
++
++#define kDslFramingModeInfo 50
++#define kDslG992VendorID 51
++
++#ifdef BCM6348_SRC
++#define kDslHWSetRcvFir2OutputScale 52
++#endif
++
++#define kDslSignalAttenuation 53
++#define kDslAttainableNetDataRate 54
++#define kDslHLinScale 55
++
++#define kG992p3XmtCodingParamsInfo 60
++#define kG992p3RcvCodingParamsInfo 61
++#define kG992p3PwrStateInfo 62
++#define kG992PilotToneInfo 63
++
++#define kDslSetPilotEyeDisplay 64
++
++#define kDslAturHwAgcResolutionMask (0xFFFFFFF8)
++#define kDslAturHwAgcMinGain ((-12)<<4)
++#ifndef BCM6348_SRC
++#define kDslAturHwAgcMaxGain (30<<4)
++#else
++#define kDslAturHwAgcMaxGain (36<<4)
++#endif
++
++#define kDslFrameStatusSend 1
++#define kDslFrameStatusSendComplete 2
++#define kDslFrameStatusRcv 3
++#define kDslFrameStatusReturn 4
++
++typedef struct _dslFramerStatus
++ {
++ dslFramerStatusCode code;
++ union
++ {
++ long value;
++ dslErrorCode error;
++ struct
++ {
++ long length;
++ uchar *framePtr;
++ } frame;
++ struct
++ {
++ long nRxFrameTotal;
++ long nRxFrameError;
++ long nTxFrameTotal;
++ } statistic;
++ } param;
++ } dslFramerStatus;
++
++typedef struct
++ {
++ dslStatusCode code;
++ union
++ {
++ long value;
++ dslErrorCode error;
++ struct
++ {
++ atmStatusCode code;
++ union
++ {
++ long value;
++ dslErrorCode error;
++ struct
++ {
++ long vci;
++ long mid;
++ long aalType;
++ long length;
++ uchar *framePtr;
++ } frame;
++ struct
++ {
++ long nFrames;
++ long nFrameErrors;
++ } statistic;
++ struct
++ {
++ long vcId;
++ long vci;
++ long aalType;
++ ulong fwdPeakCellTime;
++ ulong backPeakCellTime;
++ } vcInfo;
++ struct
++ {
++ long cellHdr;
++ long oamCmd;
++ } oamInfo;
++ struct
++ {
++ void *pVc;
++ char *pHdr;
++ void *cellHdr;
++ void *cellData;
++ } cellInfo;
++ struct
++ {
++ long totalBits;
++ long errBits;
++ } bertInfo;
++ } param;
++ } atmStatus;
++#ifdef DSL_PACKET
++ dslFramerStatus dslPacketStatus;
++#endif
++#ifdef G997_1_FRAMER
++ dslFramerStatus g997Status;
++#endif
++ struct
++ {
++ dslTrainingStatusCode code;
++ long value;
++ } dslTrainingInfo;
++ struct
++ {
++ dslConnectInfoStatusCode code;
++ long value;
++ void *buffPtr;
++ } dslConnectInfo;
++ struct
++ {
++ long maxMarginCarrier;
++ long maxSNRMargin;
++ long minMarginCarrier;
++ long minSNRMargin;
++ long avgSNRMargin;
++ long nCarriers;
++ void *buffPtr;
++ } dslShowtimeSNRMarginInfo;
++ struct
++ {
++ long code;
++ long vcId;
++ long timeStamp;
++ } dslFrameInfo;
++#ifdef G997_1
++ struct
++ {
++ long msgId;
++ long msgType;
++ char *dataPtr;
++ } dslClearEocMsg;
++#endif
++ struct
++ {
++ char *fmt;
++ long argNum;
++ void *argPtr;
++ } dslPrintfMsg;
++ struct
++ {
++ ulong nBits;
++ ulong nBlocks;
++ ulong nBitErrors;
++ ulong nBlockErrors;
++
++ ulong nAudioBits;
++ ulong nAudioBlocks;
++ ulong nAudioSyncErrors;
++ ulong nAudioBlockErrors;
++ } testResults;
++ struct
++ {
++ ulong code;
++ uchar *valuePtr;
++ ulong length;
++ } dslDataRegister;
++ struct
++ {
++ ulong code;
++ char *desc;
++ } dslExternalError;
++ struct
++ {
++ ulong numberOfCalls;
++ ulong txSignalChecksum;
++ ulong rxSignalChecksum;
++ ulong eyeDataChecksum;
++ } checksums;
++ struct
++ {
++ int sp;
++ int argc;
++ int *argv;
++ int *stackPtr;
++ int stackLen;
++ } dslException;
++ struct
++ {
++ ulong paramId;
++ void *dataPtr;
++ ulong dataLen;
++ } dslOemParameter;
++ struct
++ {
++ void *dataPtr;
++ ulong dataLen;
++ } dslDataAvail;
++ dslOLRMessage dslOLRRequest;
++ dslPwrMessage dslPwrMsg;
++ } param;
++ } dslStatusStruct;
++
++typedef void (SM_DECL *dslStatusHandlerType) (void *gDslVars, dslStatusStruct*);
++
++
++/*
++**
++** Command codes
++**
++*/
++
++typedef long dslCommandCode;
++#define kFirstDslCommandCode 256
++#define kDslIdleCmd (kFirstDslCommandCode + 0)
++#define kDslIdleRcvCmd (kFirstDslCommandCode + 1)
++#define kDslIdleXmtCmd (kFirstDslCommandCode + 2)
++#define kDslStartPhysicalLayerCmd (kFirstDslCommandCode + 3)
++#define kDslStartRetrainCmd (kFirstDslCommandCode + 4)
++#define kDslSetFrameFunctions (kFirstDslCommandCode + 5)
++#define kDslSendEocCommand (kFirstDslCommandCode + 6)
++#define kDslWriteRemoteRegister (kFirstDslCommandCode + 7)
++#define kDslReadRemoteRegister (kFirstDslCommandCode + 8)
++#define kDslWriteLocalRegister (kFirstDslCommandCode + 9)
++#define kDslReadLocalRegister (kFirstDslCommandCode + 10)
++#define kDslStoreHardwareAGCCmd (kFirstDslCommandCode + 11)
++#define kDslSetCommandHandlerCmd (kFirstDslCommandCode + 12)
++#define kSetLinkLayerStatusHandlerCmd (kFirstDslCommandCode + 13)
++#define kDslSetG997Cmd (kFirstDslCommandCode + 14)
++#define kDslLoopbackCmd (kFirstDslCommandCode + 15)
++#define kDslDiagSetupCmd (kFirstDslCommandCode + 16)
++#define kDslSetDriverCallbackCmd (kFirstDslCommandCode + 17)
++#define kDslDiagStopLogCmd (kFirstDslCommandCode + 18)
++#define kDslDiagStartBERT (kFirstDslCommandCode + 19)
++#define kDslDiagStopBERT (kFirstDslCommandCode + 20)
++#define kDslPingCmd (kFirstDslCommandCode + 21)
++#define kDslDyingGaspCmd (kFirstDslCommandCode + 22)
++#define kDslTestCmd (kFirstDslCommandCode + 23)
++#define kDslFilterSNRMarginCmd (kFirstDslCommandCode + 24)
++#define kDslAtmVcMapTableChanged (kFirstDslCommandCode + 25)
++#define kDslGetOemDataAddrCmd (kFirstDslCommandCode + 26)
++#define kDslAtmReportHEC (kFirstDslCommandCode + 27)
++#define kDslAtmReportCD (kFirstDslCommandCode + 28)
++#define kDslSetXmtGainCmd (kFirstDslCommandCode + 29)
++#define kDslSetStatusBufferCmd (kFirstDslCommandCode + 30)
++#define kDslAfeTestCmd (kFirstDslCommandCode + 31)
++#define kDslI432ResetCmd (kFirstDslCommandCode + 32)
++#define kDslSetRcvGainCmd (kFirstDslCommandCode + 33)
++#define kDslBypassRcvHpfCmd (kFirstDslCommandCode + 34)
++#define kDslWriteAfeRegCmd (kFirstDslCommandCode + 35)
++#define kDslReadAfeRegCmd (kFirstDslCommandCode + 36)
++#define kDslOLRRequestCmd (kFirstDslCommandCode + 37)
++#define kDslOLRResponseCmd (kFirstDslCommandCode + 38)
++#define kDslI432SetScrambleCmd (kFirstDslCommandCode + 39)
++#define kDslPwrMgrCmd (kFirstDslCommandCode + 40)
++#define kDslAtmGfcMappingCmd (kFirstDslCommandCode + 41)
++
++#ifdef BCM6348_SRC
++#define kDslEnablePwmSyncClk (kFirstDslCommandCode + 42)
++#define kDslSetPwmSyncClkFreq (kFirstDslCommandCode + 43)
++#endif
++
++#define kG994p1Duplex 1
++#define kG994p1HalfDuplex 2
++
++/* Eoc Messages from ATU-C to ATU-R */
++#define kDslEocHoldStateCmd 1
++#define kDslEocReturnToNormalCmd 2
++#define kDslEocPerformSelfTestCmd 3
++#define kDslEocRequestCorruptCRCCmd 4
++#define kDslEocRequestEndCorruptCRCCmd 5
++#define kDslEocNotifyCorruptCRCCmd 6
++#define kDslEocNotifyEndCorruptCRCCmd 7
++#define kDslEocRequestTestParametersUpdateCmd 8
++#define kDslEocGrantPowerDownCmd 9
++#define kDslEocRejectPowerDownCmd 10
++
++/* Eoc Messages from ATU-R to ATU-C */
++#define kDslEocRequestPowerDownCmd 11
++#define kDslEocDyingGaspCmd 12
++
++/* Clear Eoc Messages */
++#define kDslClearEocFirstCmd 100
++#define kDslClearEocSendFrame 100
++#define kDslClearEocSendComplete 101
++#define kDslClearEocRcvedFrame 102
++#define kDslClearEocSendComplete2 103
++
++#define kDslClearEocMsgLengthMask 0xFFFF
++#define kDslClearEocMsgNumMask 0xFF0000
++#define kDslClearEocMsgDataVolatileMask 0x1000000
++#define kDslClearEocMsgDataVolatile kDslClearEocMsgDataVolatileMask
++#define kDslClearEocMsgExtraSendComplete 0x2000000
++
++/* ADSL Link Power States */
++#define kDslPowerFullOn 0
++#define kDslPowerLow 1
++#define kDslPowerIdle 3
++
++/* ATU-R Data Registers */
++#define kDslVendorIDRegister 1
++#define kDslRevisionNumberRegister 2
++#define kDslSerialNumberRegister 3
++#define kDslSelfTestResultsRegister 4
++#define kDslLineAttenuationRegister 5
++#define kDslSnrMarginRegister 6
++#define kDslAturConfigurationRegister 7
++#define kDslLinkStateRegister 8
++
++#define kDslVendorIDRegisterLength 8
++#define kDslRevisionNumberRegisterLength 32
++#define kDslSerialNumberRegisterLength 32
++#define kDslSelfTestResultsRegisterLength 1
++#define kDslLineAttenuationRegisterLength 1
++#define kDslSnrMarginRegisterLength 1
++#define kDslAturConfigurationRegisterLength 30
++#define kDslLinkStateRegisterLength 1
++
++/* Dsl Diags setup flags */
++#define kDslDiagEnableEyeData 1
++#define kDslDiagEnableLogData 2
++
++/* Dsl test commands */
++typedef long dslTestCmdType;
++#define kDslTestBackToNormal 0
++#define kDslTestReverb 1
++#define kDslTestMedley 2
++#define kDslTestToneSelection 3
++#define kDslTestNoAutoRetrain 4
++#define kDslTestMarginTweak 5
++#define kDslTestEstimatePllPhase 6
++#define kDslTestReportPllPhaseStatus 7
++#define kDslTestAfeLoopback 8
++#define kDslTestL3 9
++#define kDslTestAdsl2DiagMode 10
++#define kDslTestRetL0 11
++
++/* Xmt gain default setting */
++#define kDslXmtGainAuto 0x80000000
++
++/* Unit (AFE) test commands */
++#define kDslAfeTestLoadImage 0
++#define kDslAfeTestPatternSend 1
++#define kDslAfeTestLoadImageOnly 2
++#define kDslAfeTestPhyRun 3
++#define kDslAfeTestLoadBuffer 4
++
++typedef struct
++ {
++#if defined(G992P1_ANNEX_I) || defined(G992P5)
++ ushort downstreamMinCarr, downstreamMaxCarr;
++#else
++ uchar downstreamMinCarr, downstreamMaxCarr;
++#endif
++ uchar upstreamMinCarr, upstreamMaxCarr;
++ }carrierInfo;
++
++#if defined(G992P3) && !defined(BCM6348_SRC)
++#define FAST_TEXT_TYPE
++#else
++#define FAST_TEXT_TYPE FAST_TEXT
++#endif
++
++#if defined(BCM6348_SRC)
++#define BCM6348_TEMP_MOVE_TO_LMEM
++#else
++#define BCM6348_TEMP_MOVE_TO_LMEM
++#endif
++
++#ifdef G992P3
++#define PRINT_DEBUG_INFO
++#else
++#define PRINT_DEBUG_INFO
++#endif
++
++#ifdef G992P3
++
++#define kG992p3MaxSpectBoundsUpSize 16
++#define kG992p3MaxSpectBoundsDownSize 16
++
++/* G.994 definitions */
++
++/*** Standard Info SPar2: G.992.3 Annex A Octet 1 ***/
++
++#define kG994p1G992p3AnnexASpectrumBoundsUpstream 0x01
++#define kG994p1G992p3AnnexASpectrumShapingUpstream 0x02
++#define kG994p1G992p3AnnexASpectrumBoundsDownstream 0x04
++#define kG994p1G992p3AnnexASpectrumShapingDownstream 0x08
++#define kG994p1G992p3AnnexATxImageAboveNyquistFreq 0x10
++#define kG994p1G992p3AnnexLReachExtended 0x20
++#define kG994p1G992p3AnnexMSubModePSDMasks 0x20
++
++#define kG994p1G992p3AnnexLUpNarrowband 0x02
++#define kG994p1G992p3AnnexLUpWideband 0x01
++#define kG994p1G992p3AnnexLDownNonoverlap 0x01
++
++/*** Standard Info SPar2: G.992.3 Annex A Octet 2 ***/
++
++#define kG994p1G992p3AnnexADownOverheadDataRate 0x01
++#define kG994p1G992p3AnnexAUpOverheadDataRate 0x02
++#define kG994p1G992p3AnnexAMaxNumberDownTPSTC 0x04
++#define kG994p1G992p3AnnexAMaxNumberUpTPSTC 0x08
++
++/*** Standard Info SPar2: G.992.3 Annex A Octet 3,5,7,9 ***/
++
++#define kG994p1G992p3AnnexADownSTM_TPS_TC 0x01
++#define kG994p1G992p3AnnexAUpSTM_TPS_TC 0x02
++#define kG994p1G992p3AnnexADownATM_TPS_TC 0x04
++#define kG994p1G992p3AnnexAUpATM_TPS_TC 0x08
++#define kG994p1G992p3AnnexADownPTM_TPS_TC 0x10
++#define kG994p1G992p3AnnexAUpPTM_TPS_TC 0x20
++
++/*** Standard Info SPar2: G.992.3 Annex A Octet 4,6,8,10 ***/
++
++#define kG994p1G992p3AnnexADownPMS_TC_Latency 0x01
++#define kG994p1G992p3AnnexAUpPMS_TC_Latency 0x02
++
++/***
++ * TSSI
++ *
++ * TSSI information is specified in 2 parts: subcarrier index,
++ * tssi value, and an indication of whether or no the tone specified
++ * is part of the supported set.
++ *
++ * The subcarrier index information is currently stored in the
++ * dsSubcarrierIndex array defined below. The tssi value are stored
++ * in the dsLog_tss array.
++ *
++ * The subcarrier index information only occupies the lower 12 bits
++ * of the available 16 bits (short type). Therefore, we will pack the
++ * supported set information in bit 15.
++ */
++#define kG992DsSubCarrierIndexMask (0x0fff) /* AND mask to ectract ds subcarrier index */
++#define kG992DsSubCarrierSuppSetMask (0x8000) /* AND mask to extract supported set indication */
++
++#define G992GetDsSubCarrierIndex(arg) ((arg) & kG992DsSubCarrierIndexMask)
++#define G992GetDsSubCarrierSuppSetIndication(arg) (((arg) & kG992DsSubCarrierSuppSetMask) >> 15)
++
++/* Caution: Do not change anything in this structure definition, including associated constant */
++/* This structure definition is used only by the driver and any change impose incompatibility issue in driver */
++/* The structure following this structure (g992p3PhyDataPumpCapabilities) can be changed in PHY application */
++
++typedef struct
++ {
++ Boolean rcvNTREnabled, shortInitEnabled, diagnosticsModeEnabled;
++
++ char featureSpectrum, featureOverhead;
++ char featureTPS_TC[4], featurePMS_TC[4];
++
++ short rcvNOMPSDus, rcvMAXNOMPSDus, rcvMAXNOMATPus;
++ short usSubcarrierIndex[kG992p3MaxSpectBoundsUpSize],
++ usLog_tss[kG992p3MaxSpectBoundsUpSize];
++ short numUsSubcarrier;
++ short rcvNOMPSDds, rcvMAXNOMPSDds, rcvMAXNOMATPds;
++ short dsSubcarrierIndex[kG992p3MaxSpectBoundsDownSize],
++ dsLog_tss[kG992p3MaxSpectBoundsDownSize];
++ short numDsSubcarrier;
++ uchar sizeIDFT, fillIFFT;
++ uchar readsl2Upstream, readsl2Downstream;
++ uchar minDownOverheadDataRate, minUpOverheadDataRate;
++ uchar maxDownSTM_TPSTC, maxDownATM_TPSTC, maxDownPTM_TPSTC;
++ uchar maxUpSTM_TPSTC, maxUpATM_TPSTC, maxUpPTM_TPSTC;
++
++ short minDownSTM_TPS_TC[4], maxDownSTM_TPS_TC[4],
++ minRevDownSTM_TPS_TC[4], maxDelayDownSTM_TPS_TC[4];
++ uchar maxErrorDownSTM_TPS_TC[4], minINPDownSTM_TPS_TC[4];
++ short minUpSTM_TPS_TC[4], maxUpSTM_TPS_TC[4],
++ minRevUpSTM_TPS_TC[4], maxDelayUpSTM_TPS_TC[4];
++ uchar maxErrorUpSTM_TPS_TC[4], minINPUpSTM_TPS_TC[4];
++
++ short maxDownPMS_TC_Latency[4], maxUpPMS_TC_Latency[4];
++ short maxDownR_PMS_TC_Latency[4], maxDownD_PMS_TC_Latency[4];
++ short maxUpR_PMS_TC_Latency[4], maxUpD_PMS_TC_Latency[4];
++
++ short minDownATM_TPS_TC[4], maxDownATM_TPS_TC[4],
++ minRevDownATM_TPS_TC[4], maxDelayDownATM_TPS_TC[4];
++ uchar maxErrorDownATM_TPS_TC[4], minINPDownATM_TPS_TC[4];
++ short minUpATM_TPS_TC[4], maxUpATM_TPS_TC[4],
++ minRevUpATM_TPS_TC[4], maxDelayUpATM_TPS_TC[4];
++ uchar maxErrorUpATM_TPS_TC[4], minINPUpATM_TPS_TC[4];
++
++ short minDownPTM_TPS_TC[4], maxDownPTM_TPS_TC[4],
++ minRevDownPTM_TPS_TC[4], maxDelayDownPTM_TPS_TC[4];
++ uchar maxErrorDownPTM_TPS_TC[4], minINPDownPTM_TPS_TC[4];
++ short minUpPTM_TPS_TC[4], maxUpPTM_TPS_TC[4],
++ minRevUpPTM_TPS_TC[4], maxDelayUpPTM_TPS_TC[4];
++ uchar maxErrorUpPTM_TPS_TC[4], minINPUpPTM_TPS_TC[4];
++
++ ushort subModePSDMasks;
++ } g992p3DataPumpCapabilities;
++
++#define kG992p3p5MaxSpectBoundsUpSize 16
++#define kG992p3p5MaxSpectBoundsDownSize 32
++
++typedef struct
++ {
++ Boolean rcvNTREnabled, shortInitEnabled, diagnosticsModeEnabled;
++
++ char featureSpectrum, featureOverhead;
++ char featureTPS_TC[4], featurePMS_TC[4];
++
++ short rcvNOMPSDus, rcvMAXNOMPSDus, rcvMAXNOMATPus;
++ short usSubcarrierIndex[kG992p3p5MaxSpectBoundsUpSize],
++ usLog_tss[kG992p3p5MaxSpectBoundsUpSize];
++ short numUsSubcarrier;
++ short rcvNOMPSDds, rcvMAXNOMPSDds, rcvMAXNOMATPds;
++ short dsSubcarrierIndex[kG992p3p5MaxSpectBoundsDownSize],
++ dsLog_tss[kG992p3p5MaxSpectBoundsDownSize];
++ short numDsSubcarrier;
++ uchar sizeIDFT, fillIFFT;
++ uchar readsl2Upstream, readsl2Downstream;
++ uchar minDownOverheadDataRate, minUpOverheadDataRate;
++ uchar maxDownSTM_TPSTC, maxDownATM_TPSTC, maxDownPTM_TPSTC;
++ uchar maxUpSTM_TPSTC, maxUpATM_TPSTC, maxUpPTM_TPSTC;
++
++ short minDownSTM_TPS_TC[4], maxDownSTM_TPS_TC[4],
++ minRevDownSTM_TPS_TC[4], maxDelayDownSTM_TPS_TC[4];
++ uchar maxErrorDownSTM_TPS_TC[4], minINPDownSTM_TPS_TC[4];
++ short minUpSTM_TPS_TC[4], maxUpSTM_TPS_TC[4],
++ minRevUpSTM_TPS_TC[4], maxDelayUpSTM_TPS_TC[4];
++ uchar maxErrorUpSTM_TPS_TC[4], minINPUpSTM_TPS_TC[4];
++
++ short maxDownPMS_TC_Latency[4], maxUpPMS_TC_Latency[4];
++ short maxDownR_PMS_TC_Latency[4], maxDownD_PMS_TC_Latency[4];
++ short maxUpR_PMS_TC_Latency[4], maxUpD_PMS_TC_Latency[4];
++
++ short minDownATM_TPS_TC[4], maxDownATM_TPS_TC[4],
++ minRevDownATM_TPS_TC[4], maxDelayDownATM_TPS_TC[4];
++ uchar maxErrorDownATM_TPS_TC[4], minINPDownATM_TPS_TC[4];
++ short minUpATM_TPS_TC[4], maxUpATM_TPS_TC[4],
++ minRevUpATM_TPS_TC[4], maxDelayUpATM_TPS_TC[4];
++ uchar maxErrorUpATM_TPS_TC[4], minINPUpATM_TPS_TC[4];
++
++ short minDownPTM_TPS_TC[4], maxDownPTM_TPS_TC[4],
++ minRevDownPTM_TPS_TC[4], maxDelayDownPTM_TPS_TC[4];
++ uchar maxErrorDownPTM_TPS_TC[4], minINPDownPTM_TPS_TC[4];
++ short minUpPTM_TPS_TC[4], maxUpPTM_TPS_TC[4],
++ minRevUpPTM_TPS_TC[4], maxDelayUpPTM_TPS_TC[4];
++ uchar maxErrorUpPTM_TPS_TC[4], minINPUpPTM_TPS_TC[4];
++
++ ushort subModePSDMasks;
++ } g992p3PhyDataPumpCapabilities;
++#endif
++
++typedef struct
++ {
++ dslModulationType modulations;
++ bitMap auxFeatures;
++ bitMap features;
++ bitMap demodCapabilities;
++ bitMap demodCapabilities2;
++ ushort noiseMargin; /* Q4 dB */
++#ifdef G992_ATUC
++ short xmtRSf, xmtRS, xmtS, xmtD;
++ short rcvRSf, rcvRS, rcvS, rcvD;
++#endif
++#ifdef G992P1_ANNEX_A
++ bitMap subChannelInfo;
++ carrierInfo carrierInfoG992p1;
++#endif
++#ifdef G992P1_ANNEX_B
++ bitMap subChannelInfoAnnexB;
++ carrierInfo carrierInfoG992p1AnnexB;
++#endif
++#ifdef G992_ANNEXC
++ bitMap subChannelInfoAnnexC;
++ carrierInfo carrierInfoG992p1AnnexC;
++#endif
++#if defined(G992P1_ANNEX_I)
++ bitMap subChannelInfoAnnexI;
++ carrierInfo carrierInfoG992p1AnnexI;
++#endif
++#ifdef G992P5
++ bitMap subChannelInfop5;
++ carrierInfo carrierInfoG992p5;
++#endif
++#if defined(G992P2) || (defined(G992P1_ANNEX_A) && defined(G992P1_ANNEX_A_USED_FOR_G992P2))
++ carrierInfo carrierInfoG992p2;
++#endif
++ ushort maxDataRate;
++ uchar minDataRate;
++#ifdef G992P3
++ g992p3DataPumpCapabilities *carrierInfoG992p3AnnexA;
++#endif
++#ifdef G992P5
++ g992p3DataPumpCapabilities *carrierInfoG992p5AnnexA;
++#endif
++ } dslDataPumpCapabilities;
++
++struct __dslCommandStruct;
++typedef Boolean (*dslCommandHandlerType) (void *gDslVars, struct __dslCommandStruct*);
++typedef struct __dslCommandStruct
++ {
++ dslCommandCode command;
++ union
++ {
++ long value;
++ Boolean flag;
++ struct
++ {
++ dslTestCmdType type;
++ union
++ {
++ struct
++ {
++ ulong xmtStartTone, xmtNumOfTones;
++ ulong rcvStartTone, rcvNumOfTones;
++ uchar *xmtMap, *rcvMap;
++ } toneSelectSpec;
++ struct
++ {
++ long extraPowerRequestQ4dB;
++ long numOfCarriers;
++ char *marginTweakTableQ4dB;
++ } marginTweakSpec;
++ } param;
++ } dslTestSpec;
++ struct
++ {
++ dslDirectionType direction;
++ dslDataPumpCapabilities capabilities;
++ } dslModeSpec;
++ struct
++ {
++ bitMap setup;
++ ulong eyeConstIndex1;
++ ulong eyeConstIndex2;
++ ulong logTime;
++ } dslDiagSpec;
++ struct
++ {
++ void *pBuf;
++ ulong bufSize;
++ } dslStatusBufSpec;
++ struct
++ {
++ ulong type;
++ void *afeParamPtr;
++ ulong afeParamSize;
++ void *imagePtr;
++ ulong imageSize;
++ } dslAfeTestSpec;
++ struct
++ {
++ dslLinkLayerType type;
++ bitMap setup;
++ union
++ {
++ struct
++ {
++ dataRateMap rxDataRate;
++ dataRateMap txDataRate;
++ long rtDelayQ4ms;
++ ulong rxBufNum;
++ ulong rxCellsInBuf;
++ ulong rxPacketNum;
++ dslFrameHandlerType rxIndicateHandlerPtr;
++ dslFrameHandlerType txCompleteHandlerPtr;
++ dslPhyInitType atmPhyInitPtr;
++ } atmLinkSpec;
++ struct
++ {
++ dslHeaderHandlerType rxHeaderHandlerPtr;
++ dslRxFrameBufferHandlerType rxDataHandlerPtr;
++ dslTxFrameBufferHandlerType txHandlerPtr;
++ } atmPhyLinkSpec;
++#ifdef DSL_PACKET
++ struct
++ {
++ ulong rxBufNum;
++ ulong rxBufSize;
++ ulong rxPacketNum;
++ dslFrameHandlerType rxIndicateHandlerPtr;
++ dslFrameHandlerType txCompleteHandlerPtr;
++ dslPacketPhyInitType dslPhyInitPtr;
++ } dslPacketLinkSpec;
++ dslPacketPhyFunctions dslPacketPhyLinkSpec;
++#endif
++ struct
++ {
++ txDataHandlerType txDataHandlerPtr;
++ rxDataHandlerType rxDataHandlerPtr;
++ } nullLinkSpec;
++ } param;
++ } dslLinkLayerSpec;
++#ifdef G997_1
++#ifdef G997_1_FRAMER
++ struct
++ {
++ bitMap setup;
++ ulong rxBufNum;
++ ulong rxBufSize;
++ ulong rxPacketNum;
++ dslFrameHandlerType rxIndicateHandlerPtr;
++ dslFrameHandlerType txCompleteHandlerPtr;
++ } dslG997Cmd;
++#endif
++ struct
++ {
++ long msgId;
++ long msgType;
++ char *dataPtr;
++ } dslClearEocMsg;
++#endif
++ struct
++ {
++ ulong code;
++ uchar *valuePtr;
++ ulong length;
++ } dslDataRegister;
++ union
++ {
++ dslStatusHandlerType statusHandlerPtr;
++ dslCommandHandlerType commandHandlerPtr;
++ eyeHandlerType eyeHandlerPtr;
++ logHandlerType logHandlerPtr;
++#if defined(DEBUG_DATA_HANDLER)
++ debugDataHandlerType debugDataHandlerPtr;
++#endif
++ dslFrameHandlerType rxIndicateHandlerPtr;
++ dslFrameHandlerType txCompleteHandlerPtr;
++ dslDriverCallbackType driverCallback;
++ } handlerSpec;
++#if !defined(CHIP_SRC) || defined(DSL_FRAME_FUNCTIONS)
++ dslFrameFunctions DslFunctions;
++#endif
++ dslOLRMessage dslOLRRequest;
++ dslPwrMessage dslPwrMsg;
++ } param;
++ } dslCommandStruct;
++
++
++
++
++typedef struct
++ {
++ dslCommandHandlerType linkCommandHandlerPtr;
++ timerHandlerType linkTimerHandlerPtr;
++ dslLinkCloseHandlerType linkCloseHandlerPtr;
++
++ dslFrameHandlerType linkSendHandlerPtr;
++ dslFrameHandlerType linkReturnHandlerPtr;
++
++ dslVcAllocateHandlerType linkVcAllocateHandlerPtr;
++ dslVcFreeHandlerType linkVcFreeHandlerPtr;
++ dslVcActivateHandlerType linkVcActivateHandlerPtr;
++ dslVcDeactivateHandlerType linkVcDeactivateHandlerPtr;
++ dslVcConfigureHandlerType linkVcConfigureHandlerPtr;
++
++ dslLinkVc2IdHandlerType linkVc2IdHandlerPtr;
++ dslLinkVcId2VcHandlerType linkVcId2VcHandlerPtr;
++ dslGetFramePoolHandlerType linkGetFramePoolHandlerPtr;
++
++#ifndef ADSLCORE_ONLY
++ dslHeaderHandlerType linkRxCellHeaderHandlerPtr;
++ dslRxFrameBufferHandlerType linkRxCellDataHandlerPtr;
++ dslTxFrameBufferHandlerType linkTxCellHandlerPtr;
++#endif
++
++ txDataHandlerType linkTxDataHandlerPtr;
++ rxDataHandlerType linkRxDataHandlerPtr;
++ } linkLayerFunctions;
++
++#ifndef ADSLCORE_ONLY
++
++#define LinkLayerAssignFunctions( var, name_prefix ) do { \
++ (var).linkCommandHandlerPtr = name_prefix##CommandHandler; \
++ (var).linkTimerHandlerPtr = name_prefix##TimerHandler; \
++ (var).linkCloseHandlerPtr = name_prefix##CloseHandler; \
++ \
++ (var).linkSendHandlerPtr = name_prefix##SendFrameHandler; \
++ (var).linkReturnHandlerPtr = name_prefix##ReturnFrameHandler; \
++ \
++ (var).linkVcAllocateHandlerPtr = name_prefix##VcAllocateHandler; \
++ (var).linkVcFreeHandlerPtr = name_prefix##VcFreeHandler; \
++ (var).linkVcActivateHandlerPtr = name_prefix##VcActivateHandler; \
++ (var).linkVcDeactivateHandlerPtr = name_prefix##VcDeactivateHandler; \
++ (var).linkVcConfigureHandlerPtr = name_prefix##VcConfigureHandler; \
++ \
++ (var).linkVc2IdHandlerPtr = name_prefix##Vc2IdHandler; \
++ (var).linkVcId2VcHandlerPtr = name_prefix##VcId2VcHandler; \
++ (var).linkGetFramePoolHandlerPtr = name_prefix##GetFramePoolHandler; \
++ \
++ (var).linkRxCellHeaderHandlerPtr = name_prefix##RxCellHeaderHandler; \
++ (var).linkRxCellDataHandlerPtr = name_prefix##RxCellDataHandler; \
++ (var).linkTxCellHandlerPtr = name_prefix##TxCellHandler; \
++ \
++ (var).linkTxDataHandlerPtr = name_prefix##TxDataHandler; \
++ (var).linkRxDataHandlerPtr = name_prefix##RxDataHandler; \
++} while (0)
++
++#else
++
++#define LinkLayerAssignFunctions( var, name_prefix ) do { \
++ (var).linkCommandHandlerPtr = name_prefix##CommandHandler; \
++ (var).linkTimerHandlerPtr = name_prefix##TimerHandler; \
++ (var).linkCloseHandlerPtr = name_prefix##CloseHandler; \
++ \
++ (var).linkSendHandlerPtr = name_prefix##SendFrameHandler; \
++ (var).linkReturnHandlerPtr = name_prefix##ReturnFrameHandler; \
++ \
++ (var).linkVcAllocateHandlerPtr = name_prefix##VcAllocateHandler; \
++ (var).linkVcFreeHandlerPtr = name_prefix##VcFreeHandler; \
++ (var).linkVcActivateHandlerPtr = name_prefix##VcActivateHandler; \
++ (var).linkVcDeactivateHandlerPtr = name_prefix##VcDeactivateHandler; \
++ (var).linkVcConfigureHandlerPtr = name_prefix##VcConfigureHandler; \
++ \
++ (var).linkVc2IdHandlerPtr = name_prefix##Vc2IdHandler; \
++ (var).linkVcId2VcHandlerPtr = name_prefix##VcId2VcHandler; \
++ (var).linkGetFramePoolHandlerPtr = name_prefix##GetFramePoolHandler; \
++ \
++ (var).linkTxDataHandlerPtr = name_prefix##TxDataHandler; \
++ (var).linkRxDataHandlerPtr = name_prefix##RxDataHandler; \
++} while (0)
++
++#endif
++
++typedef struct
++ {
++ dslFrameHandlerType rxIndicateHandlerPtr;
++ dslFrameHandlerType txCompleteHandlerPtr;
++ dslStatusHandlerType statusHandlerPtr;
++ } upperLayerFunctions;
++
++
++/*
++ * Debug data
++ */
++#define kDslFirstDebugData 1000
++#define kDslXmtPerSymTimeCompData (kDslFirstDebugData + 0)
++#define kDslRcvPerSymTimeCompData (kDslFirstDebugData + 1)
++#define kDslXmtAccTimeCompData (kDslFirstDebugData + 2)
++#define kDslRcvAccTimeCompData (kDslFirstDebugData + 3)
++#define kDslRcvPilotToneData (kDslFirstDebugData + 4)
++#define kDslTEQCoefData (kDslFirstDebugData + 5)
++#define kDslTEQInputData (kDslFirstDebugData + 6)
++#define kDslTEQOutputData (kDslFirstDebugData + 7)
++#define kDslRcvFFTInputData (kDslFirstDebugData + 8)
++#define kDslRcvFFTOutputData (kDslFirstDebugData + 9)
++#define kDslRcvCarrierSNRData (kDslFirstDebugData + 10)
++#define kDslXmtToneOrderingData (kDslFirstDebugData + 11)
++#define kDslRcvToneOrderingData (kDslFirstDebugData + 12)
++#define kDslXmtGainData (kDslFirstDebugData + 13)
++#define kDslRcvGainData (kDslFirstDebugData + 14)
++#define kDslMseData (kDslFirstDebugData + 15)
++#define kDslFEQOutErrData (kDslFirstDebugData + 16)
++#define kDslFEQCoefData (kDslFirstDebugData + 17)
++#define kDslShowtimeMseData (kDslFirstDebugData + 18)
++#define kDslTimeEstimationHWPhaseTweak (kDslFirstDebugData + 24)
++#define kDslSlicerInput (kDslFirstDebugData + 40)
++#define kDslXmtConstellations (kDslFirstDebugData + 41)
++#define kDslSnr1ShiftData (kDslFirstDebugData + 50)
++#define kDslSnr1InputData (kDslFirstDebugData + 51)
++#define kDslSnr1ReverbAvgData (kDslFirstDebugData + 52)
++#define kDslAnnexCFextSnrData (kDslFirstDebugData + 53)
++#define kDslAnnexCNextSnrData (kDslFirstDebugData + 54)
++#define kG994p1OutputXmtSample (kDslFirstDebugData + 100)
++#define kG994p1OutputMicroBit (kDslFirstDebugData + 101)
++#define kG994p1OutputBit (kDslFirstDebugData + 102)
++#define kG994p1OutputTimer (kDslFirstDebugData + 103)
++
++/****************************************************************************/
++/* 2. Constant definitions. */
++/* */
++/* 2.1 Defininitive constants */
++/****************************************************************************/
++
++/* dslDirectionType */
++
++#define kATU_C 0
++#define kATU_R 1
++
++/* ATM setup maps */
++
++#define kAtmCallMgrEnabled 0x00000001 /* Bit 0 */
++#define kAtmAAL1FecEnabledMask 0x00000006 /* Bit 1 */
++#define kAtmAAL1HiDelayFecEnabled 0x00000002 /* Bit 2 */
++#define kAtmAAL1LoDelayFecEnabled 0x00000004 /* Bit 3 */
++
++/* dslLinkLayerType */
++
++#define kNoDataLink 0
++#define kAtmLink 0x00000001
++#define kAtmPhyLink 0x00000002
++#define kDslPacketLink 0x00000003
++#define kDslPacketPhyLink 0x00000004
++
++/* dslModulationType */
++#define kNoCommonModulation 0x00000000
++#define kG994p1 0x00000020 /* G.994.1 or G.hs */
++#define kT1p413 0x00000040 /* T1.413 handshaking */
++#define kG992p1AnnexA 0x00000001 /* G.992.1 or G.dmt Annex A */
++#define kG992p1AnnexB 0x00000002 /* G.992.1 or G.dmt Annex B */
++#define kG992p1AnnexC 0x00000004 /* G.992.1 or G.dmt Annex C */
++#define kG992p2AnnexAB 0x00000008 /* G.992.2 or G.lite Annex A/B */
++#define kG992p2AnnexC 0x00000010 /* G.992.2 or G.lite Annex C */
++#define kG992p3AnnexA 0x00000100 /* G.992.3 or G.DMTbis Annex A */
++#define kG992p3AnnexB 0x00000200 /* G.992.3 or G.DMTbis Annex A */
++#define kG992p1AnnexI 0x00000400 /* G.992.1 Annex I */
++#define kG992p5AnnexA 0x00010000 /* G.992.5 Annex A */
++#define kG992p5AnnexB 0x00020000 /* G.992.5 Annex B */
++#define kG992p5AnnexI 0x00040000 /* G.992.5 Annex I */
++#define kG992p3AnnexM 0x00080000 /* G.992.3 Annex M */
++#define kG992p5AnnexM 0x01000000 /* G.992.5 Annex M */
++
++/* demodCapabilities bitmap */
++#define kEchoCancellorEnabled 0x00000001
++#define kSoftwareTimeErrorDetectionEnabled 0x00000002
++#define kSoftwareTimeTrackingEnabled 0x00000004
++#define kDslTrellisEnabled 0x00000008
++#define kHardwareTimeTrackingEnabled 0x00000010
++#define kHardwareAGCEnabled 0x00000020
++#define kDigitalEchoCancellorEnabled 0x00000040
++#define kReedSolomonCodingEnabled 0x00000080
++#define kAnalogEchoCancellorEnabled 0x00000100
++#define kT1p413Issue1SingleByteSymMode 0x00000200
++#define kDslAturXmtPowerCutbackEnabled 0x00000400
++#ifdef G992_ANNEXC_LONG_REACH
++#define kDslAnnexCPilot48 0x00000800
++#define kDslAnnexCReverb33_63 0x00001000
++#endif
++#ifdef G992_ANNEXC
++#define kDslCentilliumCRCWorkAroundEnabled 0x00002000
++#else
++#define kDslEnableRoundUpDSLoopAttn 0x00002000
++#endif
++#define kDslBitSwapEnabled 0x00004000
++#define kDslADILowRateOptionFixDisabled 0x00008000
++#define kDslAnymediaGSPNCrcFixEnabled 0x00010000
++#define kDslMultiModesPreferT1p413 0x00020000
++#define kDslT1p413UseRAck1Only 0x00040000
++#define kDslUE9000ADI918FECFixEnabled 0x00080000
++#define kDslG994AnnexAMultimodeEnabled 0x00100000
++#define kDslATUCXmtPowerMinimizeEnabled 0x00200000
++#define kDropOnDataErrorsDisabled 0x00400000
++#define kDslSRAEnabled 0x00800000
++
++#define kDslT1p413HigherToneLevelNeeded 0x01000000
++#define kDslT1p413SubsampleAlignmentEnabled 0x02000000
++#define kDslT1p413DisableUpstream2xIfftMode 0x04000000
++
++/* test mode related demodCapabilities, for internal use only */
++#define kDslTestDemodCapMask 0xF8000000
++#define kDslSendReverbModeEnabled 0x10000000
++#define kDslSendMedleyModeEnabled 0x20000000
++#define kDslAutoRetrainDisabled 0x40000000
++#define kDslPllWorkaroundEnabled 0x80000000
++#define kDslAfeLoopbackModeEnabled 0x08000000
++
++/* demodCapabilities bitmap2 */
++
++#define kDslAnnexCProfile1 0x00000001
++#define kDslAnnexCProfile2 0x00000002
++#define kDslAnnexCProfile3 0x00000004
++#define kDslAnnexCProfile4 0x00000008
++#define kDslAnnexCProfile5 0x00000010
++#define kDslAnnexCProfile6 0x00000020
++#define kDslAnnexCPilot64 0x00000040
++#define kDslAnnexCPilot48 0x00000080
++#define kDslAnnexCPilot32 0x00000100
++#define kDslAnnexCPilot16 0x00000200
++#define kDslAnnexCA48B48 0x00000400
++#define kDslAnnexCA24B24 0x00000800
++#define kDslAnnexCReverb33_63 0x00001000
++#define kDslAnnexCCReverb6_31 0x00002000
++
++#define kDslAnnexIShapedSSVI 0x00004000
++#define kDslAnnexIFlatSSVI 0x00008000
++
++#define kDslAnnexIPilot64 0x00010000
++#define kDslAnnexIA48B48 0x00020000
++#define kDslAnnexIPilot128 0x00040000
++#define kDslAnnexIPilot96 0x00080000
++
++/* Features bitmap */
++#define kG992p2RACK1 0x00000001
++#define kG992p2RACK2 0x00000002
++#define kG992p2DBM 0x00000004
++#define kG992p2FastRetrain 0x00000008
++#define kG992p2RS16 0x00000010
++#define kG992p2ClearEOCOAM 0x00000020
++#define kG992NTREnabled 0x00000040
++#define kG992p2EraseAllStoredProfiles 0x00000080
++#define kG992p2FeaturesNPar2Mask 0x0000003B
++#define kG992p2FeaturesNPar2Shift 0
++
++#define kG992p1RACK1 0x00000100
++#define kG992p1RACK2 0x00000200
++#define kG992p1STM 0x00000800
++#define kG992p1ATM 0x00001000
++#define kG992p1ClearEOCOAM 0x00002000
++#define kG992p1FeaturesNPar2Mask 0x00003B00
++#define kG992p1FeaturesNPar2Shift 8
++#define kG992p1DualLatencyUpstream 0x00004000
++#define kG992p1DualLatencyDownstream 0x00008000
++#define kG992p1HigherBitRates 0x40000000
++
++#if defined(G992P1_ANNEX_I)
++#define kG992p1HigherBitRates1over3 0x80000000
++#define kG992p1AnnexIShapedSSVI 0x00000001
++#define kG992p1AnnexIFlatSSVI 0x00000002
++#define kG992p1AnnexIPilotFlag 0x00000008
++#define kG992p1AnnexIPilot64 0x00000001
++#define kG992p1AnnexIPilot128 0x00000004
++#define kG992p1AnnexIPilot96 0x00000008
++#define kG992p1AnnexIPilotA48B48 0x00000010
++#endif
++
++#define kG992p1AnnexBRACK1 0x00010000
++#define kG992p1AnnexBRACK2 0x00020000
++#define kG992p1AnnexBUpstreamTones1to32 0x00040000
++#define kG992p1AnnexBSTM 0x00080000
++#define kG992p1AnnexBATM 0x00100000
++#define kG992p1AnnexBClearEOCOAM 0x00200000
++#define kG992p1AnnexBFeaturesNPar2Mask 0x003F0000
++#define kG992p1AnnexBFeaturesNPar2Shift 16
++
++#define kG992p1AnnexCRACK1 0x01000000
++#define kG992p1AnnexCRACK2 0x02000000
++#define kG992p1AnnexCDBM 0x04000000
++#define kG992p1AnnexCSTM 0x08000000
++#define kG992p1AnnexCATM 0x10000000
++#define kG992p1AnnexCClearEOCOAM 0x20000000
++#define kG992p1AnnexCFeaturesNPar2Mask 0x3F000000
++#define kG992p1AnnexCFeaturesNPar2Shift 24
++
++#define kG992p1HigherBitRates1over3 0x80000000
++
++/* auxFeatures bitmap */
++#define kG994p1PreferToExchangeCaps 0x00000001
++#define kG994p1PreferToDecideMode 0x00000002
++#define kG994p1PreferToMPMode 0x00000004
++#define kAfePwmSyncClockShift 3
++#define kAfePwmSyncClockMask (0xF << kAfePwmSyncClockShift)
++#define AfePwmSyncClockEnabled(val) (((val) & kAfePwmSyncClockMask) != 0)
++#define AfePwmGetSyncClockFreq(val) ((((val) & kAfePwmSyncClockMask) >> kAfePwmSyncClockShift) - 1)
++#define AfePwmSetSyncClockFreq(val,freq) ((val) |= ((((freq)+1) << kAfePwmSyncClockShift) & kAfePwmSyncClockMask))
++
++/* SubChannel Info bitMap for G992p1 */
++#define kSubChannelASODownstream 0x00000001
++#define kSubChannelAS1Downstream 0x00000002
++#define kSubChannelAS2Downstream 0x00000004
++#define kSubChannelAS3Downstream 0x00000008
++#define kSubChannelLSODownstream 0x00000010
++#define kSubChannelLS1Downstream 0x00000020
++#define kSubChannelLS2Downstream 0x00000040
++#define kSubChannelLS0Upstream 0x00000080
++#define kSubChannelLS1Upstream 0x00000100
++#define kSubChannelLS2Upstream 0x00000200
++#define kSubChannelInfoOctet1Mask 0x0000001F
++#define kSubChannelInfoOctet2Mask 0x000003E0
++#define kSubChannelInfoOctet1Shift 0
++#define kSubChannelInfoOctet2Shift 5
++
++/****************************************************************************/
++/* 3. Interface functions. */
++/* */
++/****************************************************************************/
++
++#ifdef G992P1
++#if defined(G992P1_ANNEX_I2X) || defined(G992P5)
++/* lke */
++#define kDslSamplingFreq 4416000
++#define kDslMaxFFTSize 1024
++#define kDslMaxFFTSizeShift 10
++#elif defined(G992P1_ANNEX_I4X)
++#define kDslSamplingFreq 8832000
++#define kDslMaxFFTSize 2048
++#define kDslMaxFFTSizeShift 11
++#elif defined(G992P1_ANNEX_I8X)
++#define kDslSamplingFreq 17664000
++#define kDslMaxFFTSize 4096
++#define kDslMaxFFTSizeShift 12
++#else
++#define kDslSamplingFreq 2208000
++#define kDslMaxFFTSize 512
++#define kDslMaxFFTSizeShift 9
++#endif
++#else
++#define kDslSamplingFreq 1104000
++#define kDslMaxFFTSize 256
++#define kDslMaxFFTSizeShift 8
++#endif
++
++#if defined(G992_ATUR_UPSTREAM_SAMPLING_FREQ_276KHZ)
++#define kDslATURUpstreamSamplingFreq 276000
++#define kDslATURFFTSizeShiftUpstream 6
++#elif defined(G992_ATUR_UPSTREAM_SAMPLING_FREQ_552KHZ)
++#define kDslATURUpstreamSamplingFreq 552000
++#define kDslATURFFTSizeShiftUpstream 7
++#else
++#define kDslATURUpstreamSamplingFreq kDslSamplingFreq
++#define kDslATURFFTSizeShiftUpstream kDslMaxFFTSizeShift
++#endif
++
++#if defined(G992_ATUC_UPSTREAM_SAMPLING_FREQ_276KHZ)
++#define kDslATUCUpstreamSamplingFreq 276000
++#define kDslATUCFFTSizeShiftUpstream 6
++#elif defined(G992_ATUC_UPSTREAM_SAMPLING_FREQ_552KHZ)
++#define kDslATUCUpstreamSamplingFreq 552000
++#define kDslATUCFFTSizeShiftUpstream 7
++#else
++#define kDslATUCUpstreamSamplingFreq kDslSamplingFreq
++#define kDslATUCFFTSizeShiftUpstream kDslMaxFFTSizeShift
++#endif
++
++#define kDslMaxSamplesPerSymbol (kDslMaxFFTSize+kDslMaxFFTSize/16)
++
++#if defined(G992P1_ANNEX_I) || defined(G992P5)
++#define kDslMaxTEQLength 32
++#else
++#define kDslMaxTEQLength 16
++#endif
++
++#define kDslMaxSymbolBlockSize 1
++#define kDslMaxSampleBlockSize (kDslMaxSymbolBlockSize*kDslMaxSamplesPerSymbol)
++
++#ifdef G992_ANNEXC
++#define kG992AnnexCXmtToRcvPathDelay 512 /* In samples at kDslSamplingFreq */
++#endif
++
++/*** For compatibility with existing test codes ***/
++#if !defined(TARG_OS_RTEMS)
++typedef dslStatusCode modemStatusCode;
++typedef dslStatusStruct modemStatusStruct;
++typedef dslStatusHandlerType statusHandlerType;
++typedef dslCommandCode modemCommandCode;
++typedef dslCommandStruct modemCommandStruct;
++typedef dslCommandHandlerType commandHandlerType;
++#endif
++
++extern void SM_DECL SoftDslSetRefData (void *gDslVars, ulong refData);
++extern ulong SM_DECL SoftDslGetRefData (void *gDslVars);
++extern int SM_DECL SoftDslGetMemorySize(void);
++extern void SM_DECL SoftDslInit (void *gDslVars);
++extern void SM_DECL SoftDslReset (void *gDslVars);
++extern void SM_DECL SoftDslLineHandler (void *gDslVars, int rxNSamps, int txNSamps, short *rcvPtr, short *xmtPtr) FAST_TEXT;
++extern Boolean SM_DECL SoftDslCommandHandler (void *gDslVars, dslCommandStruct *cmdPtr);
++
++/* swap Lmem functions */
++#if defined(bcm47xx) && defined(SWAP_LMEM)
++extern int SoftDslSwapLmem(void *gDslVars, int sectionN, int imageN);
++extern void init_SoftDslSwapLmem(void);
++#endif
++
++/* SoftDsl time functions */
++
++extern ulong SM_DECL SoftDslGetTime(void *gDslVars);
++#define __SoftDslGetTime(gv) gDslGlobalVarPtr->execTime
++
++extern void SM_DECL SoftDslTimer(void *gDslVars, ulong timeMs);
++
++/* SoftDsl IO functions */
++
++extern void SM_DECL SoftDslClose (void *gDslVars);
++extern int SM_DECL SoftDslSendFrame (void *gDslVars, void *pVc, ulong mid, dslFrame * pFrame);
++extern int SM_DECL SoftDslReturnFrame (void *gDslVars, void *pVc, ulong mid, dslFrame * pFrame);
++
++/* SoftDsl connection functions */
++
++extern void* SM_DECL SoftDslVcAllocate(void *gDslVars, dslVcParams *pVcParams);
++extern void SM_DECL SoftDslVcFree(void *gDslVars, void *pVc);
++extern Boolean SM_DECL SoftDslVcActivate(void *gDslVars, void *pVc);
++extern void SM_DECL SoftDslVcDeactivate(void *gDslVars, void *pVc);
++extern Boolean SM_DECL SoftDslVcConfigure(void *gDslVars, void *pVc, ulong mid, dslVcParams *pVcParams);
++
++/* Special functions for LOG support */
++
++extern ulong SM_DECL SoftDslVc2Id(void *gDslVars, void *pVc);
++extern void* SM_DECL SoftDslVcId2Vc(void *gDslVars, ulong vcId);
++extern void* SM_DECL SoftDslGetFramePool(void *gDslVars);
++
++/* Functions for host mode execution */
++
++extern void* SM_DECL SoftDslRxCellHeaderHandler (void *gDslVars, ulong hdr, uchar hdrHec);
++extern void* SM_DECL SoftDslRxCellDataHandler (void *gDslVars, int, void*);
++extern void* SM_DECL SoftDslTxCellHandler (void *gDslVars, int*, void*);
++extern Boolean SM_DECL SoftDslPhyCommandHandler (void *gDslVars, dslCommandStruct *cmdPtr);
++
++/* Functions getting OEM parameters including G994 non standard info management */
++
++extern char* SM_DECL SoftDslGetTrainingVendorIDString(void *gDslVars);
++extern char* SM_DECL SoftDslGetVendorIDString(void *gDslVars);
++extern char* SM_DECL SoftDslGetSerialNumberString(void *gDslVars);
++extern char* SM_DECL SoftDslGetRevString(void *gDslVars);
++extern int SM_DECL SoftDslRevStringSize(void *gDslVars);
++extern int SM_DECL SoftDslSerNumStringSize(void *gDslVars);
++
++extern void* SM_DECL SoftDslGetG994p1RcvNonStdInfo(void *gDslVars, ulong *pLen);
++extern void* SM_DECL SoftDslGetG994p1XmtNonStdInfo(void *gDslVars, ulong *pLen);
++
++#ifdef G997_1_FRAMER
++
++/* G997 functions */
++
++extern int SM_DECL SoftDslG997SendFrame (void *gDslVars, void *pVc, ulong mid, dslFrame * pFrame);
++extern int SM_DECL SoftDslG997ReturnFrame (void *gDslVars, void *pVc, ulong mid, dslFrame * pFrame);
++
++#endif
++
++#ifdef ADSL_MIB
++extern void * SM_DECL SoftDslMibGetData (void *gDslVars, int dataId, void *pAdslMibData);
++#endif
++
++#define SoftDsl SoftDslLineHandler
++#define kSoftDslMaxMemorySize (32768*16384)
++
++/*
++ * Internal functions
++ */
++
++extern void SoftDslStatusHandler (void *gDslVars, dslStatusStruct *status) FAST_TEXT;
++extern void SoftDslInternalStatusHandler (void *gDslVars, dslStatusStruct *status);
++
++/*
++ * DSL OS functions
++ */
++
++#ifdef DSL_OS
++
++#define SoftDslIsBgAvailable(gDslVars) (DSLOS_THREAD_INACTIVE == DslOsGetThreadState(&(gDslGlobalVarPtr->tcbDslBg)))
++#define SoftDslGetBgThread(gDslVars) \
++ ((DSLOS_THREAD_INACTIVE != DslOsGetThreadState(&(gDslGlobalVarPtr->tcbDslBg))) ? &gDslGlobalVarPtr->tcbDslBg : NULL)
++#define SoftDslBgStart(gDslVars, pFunc) \
++ DslOsCreateThread(&gDslGlobalVarPtr->tcbDslBg, DSLOS_PRIO_HIGHEST - 10, pFunc, gDslVars, \
++ WB_ADDR(gDslGlobalVarPtr->bgStack), sizeof(gDslGlobalVarPtr->bgStack))
++#define SoftDslBgStop(gDslVars) DslOsDeleteThread(&gDslGlobalVarPtr->tcbDslBg)
++
++#define SoftDslEnterCritical() DslOsEnterCritical()
++#define SoftDslLeaveCritical(id) DslOsLeaveCritical(id)
++
++#else
++
++#define SoftDslIsBgAvailable(gDslVars) 1
++#define SoftDslGetBgThread(gDslVars) 1
++#define SoftDslBgStart(gDslVars, pFunc) (*pFunc)(gDslVars)
++#define SoftDslBgStop(gDslVars)
++
++#define SoftDslEnterCritical() 0
++#define SoftDslLeaveCritical(id)
++
++#endif
++
++/*
++ * DSL frames and native frame functions
++ */
++
++DslFrameDeclareFunctions (DslFrameNative)
++
++/*
++ * These functions are for testing purpose, they are defined outside.
++ */
++#ifdef STACK_SIZE_REQUIREMENT_TEST
++extern void StackSizeTestInitializeStackBeforeEntry(void);
++extern void StackSizeTestCheckStackAfterExit(void);
++extern void StackSizeTestBackupStack(void);
++extern void StackSizeTestRestoreStack(void);
++#endif /* STACK_SIZE_REQUIREMENT_TEST */
++
++#ifdef NEC_NSIF_WORKAROUND
++#define SoftDslGetG994NsStatus(gDslVars) (gDslGlobalVarPtr->G994NsStatus)
++#define SoftDslGetG994NsFailCounter(gDslVars) (gDslGlobalVarPtr->G994NsFailCounter)
++#endif
++
++#endif /* SoftDslHeader */
+diff -urN linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/impl1/softdsl/SoftModem.h linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/impl1/softdsl/SoftModem.h
+--- linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/impl1/softdsl/SoftModem.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/impl1/softdsl/SoftModem.h 2006-06-26 09:07:10.000000000 +0200
+@@ -0,0 +1,3128 @@
++/*
++<:copyright-broadcom
++
++ Copyright (c) 2002 Broadcom Corporation
++ All Rights Reserved
++ No portions of this material may be reproduced in any form without the
++ written permission of:
++ Broadcom Corporation
++ 16215 Alton Parkway
++ Irvine, California 92619
++ All information contained in this document is Broadcom Corporation
++ company private, proprietary, and trade secret.
++
++:>
++*/
++/****************************************************************************
++ *
++ * SoftModem.h
++ *
++ *
++ * Description:
++ * This file contains the exported interface for SoftModem.c
++ *
++ *
++ * Copyright (c) 1993-1998 AltoCom, Inc. All rights reserved.
++ * Authors: Mark Gonikberg, Haixiang Liang.
++ *
++ * $Revision: 1.16 $
++ *
++ * $Id: SoftModem.h,v 1.16 2004/04/14 21:16:51 ilyas Exp $
++ *
++ * $Log: SoftModem.h,v $
++ * Revision 1.16 2004/04/14 21:16:51 ilyas
++ * Merged with the latest changes in ADSL driver
++ *
++ * Revision 1.15 2004/04/13 00:56:10 ilyas
++ * Merged the latest ADSL driver changes for RTEMS
++ *
++ * Revision 1.14 2004/04/13 00:16:59 ilyas
++ * Merged the latest ADSL driver changes
++ *
++ * Revision 1.13 2003/02/22 05:07:11 ilyas
++ * Added VendorID for T1.413 mode
++ *
++ * Revision 1.12 2002/10/03 19:34:24 ilyas
++ * Added size for EOC serial number register
++ *
++ * Revision 1.11 2002/09/07 01:37:22 ilyas
++ * Added support for OEM parameters
++ *
++ * Revision 1.10 2001/12/13 02:25:34 ilyas
++ * Added definitions for G997
++ *
++ * Revision 1.9 2001/11/30 05:56:34 liang
++ * Merged top of the branch AnnexBDevelopment onto top of the tree.
++ *
++ * Revision 1.7.2.2 2001/11/27 02:32:05 liang
++ * Combine vendor ID, serial #, and version number into SoftModemVersionNumber.c.
++ *
++ * Revision 1.7.2.1 2001/10/03 01:44:10 liang
++ * Merged with codes from main tree (tag SoftDsl_2_18).
++ *
++ * Revision 1.8 2001/09/21 19:19:01 ilyas
++ * Minor fixes for VxWorks build
++ *
++ * Revision 1.7 2000/07/17 21:08:16 lkaplan
++ * removed global pointer
++ *
++ * Revision 1.6 2000/05/03 04:09:11 ilyas
++ * Added ID for ATM log data
++ *
++ * Revision 1.5 2000/04/01 01:07:44 liang
++ * Changed file names and some module names.
++ *
++ * Revision 1.4 2000/03/02 20:18:12 ilyas
++ * Added test status code for ATM VC finished
++ *
++ * Revision 1.3 1999/08/05 20:02:11 liang
++ * Merged with the softmodem top of the tree on 08/04/99.
++ *
++ * Revision 1.2 1999/01/27 22:19:08 liang
++ * Merge with SoftModem_3_1_02.
++ * Include SoftDsl.h conditionlly so that the test utilities from SoftModem
++ * can be used without major change. It can be merged easily to SoftModem.
++ *
++ * Revision 1.170 1998/12/22 00:52:52 liang
++ * Added auxFeatures bit kV8HoldANSamUntilDetCI. When it is set, ANSam won't be
++ * sent until CI is detected (normally ANSam will be sent after 200ms). This is
++ * useful in V34 half duplex fax mode.
++ *
++ * Revision 1.169 1998/12/19 04:46:52 mwg
++ * Added bits for fax/data calling tones
++ *
++ * Revision 1.168 1998/12/17 02:46:10 scott
++ * Removed overlay-related commands/statuses and added
++ * kSetTrainingDelayReductionCmd
++ *
++ * Revision 1.167 1998/12/12 03:17:42 scott
++ * Added overlay commands and statuses
++ *
++ * Revision 1.166 1998/12/02 05:34:23 mwg
++ * Fixed a problem with bong tone detection
++ *
++ * Revision 1.165 1998/11/26 00:22:44 yura
++ * Added two more log data types: modulatorInputData & modulatorOutputData
++ *
++ * Revision 1.164 1998/11/19 03:08:04 mwg
++ * Added kSetCallProgressParamsCmd
++ *
++ * Revision 1.163 1998/11/18 23:00:03 liang
++ * Added a separate command kLoopbackTestAutoRespEnableCmd to enable or disable
++ * the loopback test auto respond feature when the modem is already on-line.
++ *
++ * Revision 1.162 1998/11/13 20:50:21 scott
++ * SoftModemInternalStatusHandler is now SM_DECL as well
++ *
++ * Revision 1.161 1998/11/13 20:42:25 scott
++ * Added SM_DECL type to entrypoint functions
++ *
++ * Revision 1.160 1998/11/13 03:02:54 scott
++ * Added SoftModemTimer prototype.
++ * Also include V.8bis types if AT_COMMANDS_V8BIS is defined.
++ *
++ * Revision 1.159 1998/11/12 01:22:46 scott
++ * Increased number of AT registers to 46
++ *
++ * Revision 1.158 1998/11/05 22:35:18 yura
++ * Added two more S-registers
++ *
++ * Revision 1.157 1998/11/05 03:09:54 mwg
++ * Added kLapmRetryFailed to the list of LAPM errors
++ *
++ * Revision 1.156 1998/11/05 00:13:20 liang
++ * Add new connectionInfo status kLoopbackSelfTestNewErrs to report
++ * new bit errors whenever it happens.
++ *
++ * Revision 1.155 1998/11/04 07:11:33 mwg
++ * Moved declaration for SoftModemATPrintf() to SoftModem.h
++ *
++ * Revision 1.154 1998/10/29 07:24:49 mwg
++ * *** empty log message ***
++ *
++ * Revision 1.153 1998/10/15 02:09:37 luisgm
++ * added separate data rate mask for Flex to dataPumpCapabilities structure
++ *
++ * Revision 1.152 1998/10/14 00:12:15 scott
++ * Added kMnpOOBFrameCmd and command.frameSpec
++ *
++ * Revision 1.151 1998/10/09 02:19:22 luisgm
++ * added FlexV8bisStruct member to dataPumpCapabilities struc to store flex v8bis info, added define for kFlexSkipV8bis
++ *
++ * Revision 1.150 1998/10/06 19:36:33 mwg
++ * Limited 56K rates to 53K
++ *
++ * Revision 1.149 1998/10/03 03:43:38 ilyas
++ * Added status codes for Audio
++ *
++ * Revision 1.148 1998/10/01 02:03:17 mwg
++ * Added external pulse dialer option
++ *
++ * Revision 1.147 1998/09/30 01:44:26 mwg
++ * Added new functions SoftModemGetWriteBufferSize() & SoftModemGetReadBufferSize()
++ *
++ * Revision 1.146 1998/09/22 03:44:38 scott
++ * Added ALWAYS_LONG_ALIGN() macro
++ *
++ * Revision 1.145 1998/09/21 21:49:22 scott
++ * Added logDataCodes for mnpDecoder(Input/Output)Data
++ *
++ * Revision 1.144 1998/08/31 22:57:21 luisgm
++ * added constants for Flex data rates + kFlexEventTRN2AFinished
++ *
++ * Revision 1.143 1998/08/18 05:09:53 mwg
++ * Increased AT command buffer size to 128
++ *
++ * Revision 1.142 1998/08/18 03:45:54 ilyas
++ * Integrated Audio into V70 test
++ *
++ * Revision 1.141 1998/08/14 17:46:04 ilyas
++ * Integrated Audio and G729a
++ *
++ * Revision 1.140 1998/08/10 21:42:19 mwg
++ * Added space and mark parity
++ *
++ * Revision 1.139 1998/08/08 03:39:33 scott
++ * Moved the C6xDefs and PentiumDefs includes before the internal function
++ * prototypes (to permit their redefinitions)
++ *
++ * Revision 1.138 1998/08/07 20:37:27 yura
++ * Added new S-register for &T commands
++ *
++ * Revision 1.137 1998/08/01 05:22:09 mwg
++ * Implemented split memory model
++ *
++ * Revision 1.136 1998/07/22 02:12:22 liang
++ * Added self test mode for loopback test.
++ *
++ * Revision 1.135 1998/07/21 01:19:03 liang
++ * Changed loopback test command parameter interface to use regular modeSpec.
++ *
++ * Revision 1.134 1998/07/18 03:52:10 liang
++ * Added V54 loop 2 test for V22.
++ *
++ * Revision 1.133 1998/07/15 02:45:03 mwg
++ * Added new connection info code: kPCMSpectralShapingBits
++ *
++ * Revision 1.132 1998/07/15 00:18:48 liang
++ * Add special turn off command for V34 fax to handle different turn off procedures.
++ *
++ * Revision 1.131 1998/07/13 22:19:49 liang
++ * Add V8 CI detection status and ANSam disable aux feature.
++ *
++ * Revision 1.130 1998/07/08 17:09:13 scott
++ * Added USE_LONG_ALIGN; support for 6 and PentiumDefs.h files
++ *
++ * Revision 1.129 1998/07/03 23:28:13 mwg
++ * Added Fax Class 2 defines
++ *
++ * Revision 1.128 1998/07/03 23:17:33 mwg
++ * Insuread command/status structures are long aligned
++ *
++ * Revision 1.127 1998/06/23 16:48:01 mwg
++ * Fixed a longstanding problem typical for Win95 VxD: whenever new
++ * VxD is intalled the confuguration profile may not match the old one but
++ * since the crc is correct it is still being downloaded. To avoid the problem
++ * a crc for the version number was added to avoid confusion between profiles
++ * of different versions.
++ *
++ * Revision 1.126 1998/06/19 21:04:06 liang
++ * Add auxiliary feature bit kV90ServerNotDetSbarAfterJdbarFix.
++ *
++ * Revision 1.125 1998/06/11 22:48:14 liang
++ * Add kPCM28000bpsShift constant.
++ *
++ * Revision 1.124 1998/06/05 22:11:51 liang
++ * New V90 DIL works through data mode.
++ *
++ * Revision 1.123 1998/06/01 23:03:41 liang
++ * Add v90RcvdDilDiffData logging.
++ *
++ * Revision 1.122 1998/06/01 21:24:38 mwg
++ * Changed some of the names.
++ *
++ * Revision 1.121 1998/05/13 04:55:22 mwg
++ * Now passing the number of spectral shaping bits in aux features
++ *
++ * Revision 1.120 1998/05/13 02:53:13 liang
++ * Add field "value" to command param structure.
++ *
++ * Revision 1.119 1998/05/12 04:42:23 mwg
++ * Replaced some of the status messages
++ *
++ * Revision 1.118 1998/05/11 23:36:10 mwg
++ * Added 8000Hz symbol rate to the map
++ *
++ * Revision 1.117 1998/05/05 04:28:39 liang
++ * V90 works up to data mode first version.
++ *
++ * Revision 1.116 1998/04/21 09:36:45 mwg
++ * Fixed a few problems for 16Khz and added 32Khz.
++ *
++ * Revision 1.115 1998/04/17 22:33:54 liang
++ * Added V90 DIL for mu-law PCM.
++ *
++ * Revision 1.114 1998/04/15 22:36:39 mwg
++ * Added new parameters to kDialCmd to allow individual control of each
++ * DTMF group attenuation.
++ *
++ * Revision 1.113 1998/04/15 18:16:22 ilyas
++ * Integrated V.8bis and changed coding of LinkLayerType to bitMap
++ *
++ * Revision 1.112 1998/04/15 07:59:06 mwg
++ * Added new status codes for V.90
++ *
++ * Revision 1.111 1998/04/11 00:29:16 mwg
++ * Fixed the warnings which appeared when Irix builds were upgraded to
++ * gcc 2.8.1
++ *
++ * Revision 1.110 1998/04/11 00:25:01 ilyas
++ * More V.70 statuses
++ *
++ * Revision 1.109 1998/04/10 23:29:31 mwg
++ * Added new field to capabilities: dataRates56K
++ *
++ * Revision 1.108 1998/04/09 02:02:56 mwg
++ * Added status for Ja detection.
++ *
++ * Revision 1.107 1998/04/03 02:05:30 ilyas
++ * More V.70 commands added
++ *
++ * Revision 1.106 1998/04/02 06:15:39 mwg
++ * Added coding type (Mu-law/A-law) status reporting.
++ *
++ * Revision 1.105 1998/03/30 09:53:57 mwg
++ * Added definition for k56Flex modulation for future use.
++ *
++ * Revision 1.104 1998/03/27 17:56:09 ilyas
++ * Added definitions for V.70
++ *
++ * Revision 1.103 1998/03/26 23:29:04 liang
++ * Added first version of IMD estimation.
++ *
++ * Revision 1.102 1998/03/20 04:37:26 mwg
++ * Increased the size of the nominal variance to 32 bit.
++ *
++ * Revision 1.101 1998/03/06 01:22:04 yura
++ * Improved Win95 VxD segmentation handling
++ *
++ * Revision 1.100 1998/03/06 01:06:18 liang
++ * Add initial version of V90 phase 1 and 2.
++ *
++ * Revision 1.99 1998/03/05 23:42:22 mwg
++ * (hxl) Implemented enable/disable call waiting command.
++ *
++ * Revision 1.98 1998/02/26 06:13:06 mwg
++ * Increased the number of AT S-registers to account for newly introduced
++ * S9 and S10.
++ *
++ * Revision 1.97 1998/02/25 18:18:25 scott
++ * Added v42bisCycleCount for V42BIS_THROUGHPUT_CONTROL
++ *
++ * Revision 1.96 1998/02/24 05:31:20 mwg
++ * Added stuff required by international version of AT command processor.
++ *
++ * Revision 1.95 1998/02/17 01:14:10 scott
++ * Reenabled sys/types.h for Linux builds
++ *
++ * Revision 1.94 1998/02/16 22:32:23 scott
++ * Changed copyright notice
++ *
++ * Revision 1.93 1998/02/16 22:17:44 scott
++ * Turned off include of sys/types.h for normal builds
++ *
++ * Revision 1.92 1998/02/16 21:53:28 scott
++ * Exclude sys/types.h for another compiler
++ *
++ * Revision 1.91 1998/02/09 18:24:10 scott
++ * Fixed ComplexShort type to work around bugs in MS and GreenHill compilers
++ *
++ * Revision 1.90 1998/01/27 01:37:36 mwg
++ * Added new log identifier for pcm infidelity data.
++ *
++ * Revision 1.89 1998/01/22 19:49:32 liang
++ * Add auxFeature bit kFaxV34HDXAllowAsymCtrlChan.
++ *
++ * Revision 1.88 1998/01/21 02:32:01 liang
++ * Add more V34 half duplex training progress codes.
++ *
++ * Revision 1.87 1997/12/23 03:28:25 liang
++ * Add more half duplex V34 related constants.
++ *
++ * Revision 1.86 1997/12/18 19:38:50 scott
++ * Added agcData log type.
++ * Added kDisableFaxFastClearDown demod capability
++ *
++ * Revision 1.85 1997/12/18 06:02:45 mwg
++ * Added a function to reenable DC offset tracking.
++ *
++ * Revision 1.84 1997/12/17 22:46:30 mwg
++ * Minor modifications to X2 escape status reporting.
++ *
++ * Revision 1.83 1997/12/16 06:49:45 mwg
++ * Implemented proper data rate reporting for PCM modem.
++ *
++ * Revision 1.82 1997/12/13 06:11:08 mwg
++ * Added X2 interface hooks
++ *
++ * Revision 1.81 1997/12/02 06:21:33 mwg
++ * Implemented kSetATRegister command.
++ *
++ * Revision 1.80 1997/11/27 02:11:41 liang
++ * Add code for half duplex V34 control channel.
++ *
++ * Revision 1.79 1997/11/19 19:52:48 guy
++ * Added constant to define V.34 half duplex operation
++ *
++ * Revision 1.78 1997/10/24 05:15:53 scott
++ * Added AGC and phase hit recovery to demodCapabilities
++ *
++ * Revision 1.77 1997/10/01 02:47:50 liang
++ * Add PCM interface.
++ *
++ * Revision 1.76 1997/09/29 15:48:04 yura
++ * Added #pragma statement for W95 Vxd
++ *
++ * Revision 1.75 1997/09/18 20:32:39 scott
++ * Do not include VxD support files if GENERATE_DEPENDENCIES is defined.
++ *
++ * Revision 1.74 1997/09/18 12:40:55 yura
++ * Removed #ifdef statments to be more robust
++ *
++ * Revision 1.73 1997/09/17 17:32:41 scott
++ * Do not include sys/types.h for 6
++ *
++ * Revision 1.72 1997/08/08 00:53:48 mwg
++ * Added fields for LAP-M frames printout.
++ * Added fields in auxFeatures to pass preemphasis filter parameters
++ * to V.34 phase 3 when doing PTT testing.
++ *
++ * Revision 1.71 1997/08/06 03:41:45 yura
++ * Added a few includes and defines needed by Win 95 driver.
++ *
++ * Revision 1.70 1997/08/05 03:22:10 liang
++ * Add equalizer center tap adjustment calculation related constants.
++ *
++ * Revision 1.69 1997/07/29 02:44:19 mwg
++ * Added new field to dataPumpCapabilities structure. This field is not
++ * yet exposed to external interface and currently is only used to
++ * enable PTT testing.
++ * Added new commands: kStartDataModemPTTTestCmd & kStartDataModemLoopbackTestCmd
++ *
++ * Revision 1.68 1997/07/22 22:05:10 liang
++ * Change sample rate setup as a normal command.
++ *
++ * Revision 1.67 1997/07/21 23:23:30 liang
++ * Define SoftModemSetSampleRate as null when SAMPLE_RATE_CONVERSION is not defined.
++ *
++ * Revision 1.66 1997/07/21 22:38:36 liang
++ * Change sample rate converter structure so that sample rate can be changed
++ * on the fly (at very begining) to either 8KHz or 9600Hz.
++ *
++ * Revision 1.65 1997/07/21 20:22:01 mwg
++ * Added statusInfoData to the log identifiers.
++ *
++ * Revision 1.64 1997/07/16 20:40:07 scott
++ * Added multitone monitor fields
++ *
++ * Revision 1.63 1997/07/10 02:31:08 mwg
++ * 1. Added kRxFrameHDLCFlags detected status for the
++ * framingInfo.
++ * 2. Added kLapmMNPFrameDetected status to lapmStatusCode.
++ * 3. Increased the number of AT registers to 35
++ * 4. Modified LinkLayerSpec structure in modemCommandStruc
++ * to provide the initial values of rxDataRate &
++ * txDataRate and RT delay for the cases when
++ * link layer is started *after* the data connection
++ * is established and the status snooper is unable
++ * to determine the rates and RT delay.
++ * 5. Added a few extra *empty* constant definitions for
++ * disabled features.
++ *
++ * Revision 1.62 1997/07/02 19:15:05 scott
++ * Added bits for Bel103 & Bel212 modulations.
++ *
++ * Revision 1.61 1997/07/02 05:15:16 mwg
++ * Added MNP code.
++ *
++ * Revision 1.60 1997/07/01 23:52:48 mwg
++ * Modified the record test setup to log and use all the commands.
++ *
++ * Revision 1.59 1997/06/25 19:11:26 mwg
++ * 1. Added new framingInfoCode values for Async framing error reporting;
++ * 2. Added a substructure to pass serial data format for kSetDTERate cmd;
++ *
++ * Revision 1.58 1997/05/28 02:05:08 liang
++ * Add PCM modem phase 2 codes.
++ *
++ * Revision 1.57 1997/05/12 21:55:08 liang
++ * Add call waiting tone detector module.
++ *
++ * Revision 1.56 1997/03/21 23:50:08 liang
++ * Added initial version of V8bis module to CVS tree.
++ *
++ * Revision 1.55 1997/03/19 18:35:05 mwg
++ * Changed copyright notice.
++ *
++ * Revision 1.54 1997/03/11 11:11:45 mwg
++ * Added code to report V42bis statistics.
++ *
++ * Revision 1.53 1997/03/04 06:21:08 mwg
++ * Added logging of most commands.
++ *
++ * Revision 1.52 1997/02/28 23:45:13 liang
++ * Added training progress status report kPhaseJitterDeactivated.
++ *
++ * Revision 1.51 1997/02/28 22:23:22 mwg
++ * Implemented the following features:
++ * - Cleardown for fax modulations V.27, V.29 V.17
++ * - Rockwell compatible bitmap report (needed by a customer)
++ *
++ * Revision 1.50 1997/02/28 03:05:31 mwg
++ * Added more logging data types.
++ *
++ * Revision 1.49 1997/02/27 05:28:58 mwg
++ * Added RxFrameOK report.
++ *
++ * Revision 1.48 1997/02/27 01:48:53 liang
++ * Add kV8MenuDataWord1 and kV8MenuDataWord2 connectionInfo status.
++ *
++ * Revision 1.47 1997/02/24 02:30:27 mwg
++ * Added new log data: predictorErrData
++ *
++ * Revision 1.46 1997/02/22 03:00:22 liang
++ * Add echoCancelledSignalData.
++ *
++ * Revision 1.45 1997/02/21 01:26:42 liang
++ * Add six more bits for the Demodulator capabilities to deal with 2nd order
++ * time tracking & PLLs, as well as shorter NEEC & PFEEC, and front end HBF.
++ *
++ * Revision 1.44 1997/02/17 03:09:00 mwg
++ * Added LAPM statistics printout.
++ *
++ * Revision 1.43 1997/02/04 08:38:47 mwg
++ * Added dc cancelled samples printout.
++ *
++ * Revision 1.42 1997/01/29 21:40:28 mwg
++ * Changed the way timers work: now time is passed as Q4 ms instead of ticks.
++ * Completed the 8KHz front end implementation.
++ * Got rid of kSamplesPerSecond constant.
++ *
++ * Revision 1.41 1997/01/24 07:13:50 mwg
++ * Added new statuses for automoder.
++ *
++ * Revision 1.40 1997/01/23 02:03:08 mwg
++ * Replaced old sample rate conversion with the newer one.
++ * Still has to resolve the automoding issue.
++ *
++ * Revision 1.39 1997/01/21 00:55:04 mwg
++ * Added 8KHz front end functionality.
++ *
++ * Revision 1.38 1996/11/13 00:30:55 liang
++ * Add kAutoLoadReductionEnabled to demodCapabilities so that PFEEC, FEEC, IEEC
++ * can be disabled automatically, but for worst processor loading test they
++ * won't be disabled when this bit is not set.
++ *
++ * Revision 1.37 1996/11/07 23:07:18 mwg
++ * Rearranged global variables to allow V.17 short training.
++ *
++ * Revision 1.36 1996/09/17 23:55:05 liang
++ * Change kMaxDataBlockSize from 16 to 24 to handle high data rates.
++ *
++ * Revision 1.35 1996/09/05 19:43:39 liang
++ * Removed caller ID error status code kCallerIDUnknownMessageType, and
++ * added caller ID status codes kCallerIDUnknownMessage & kCallerIDWholeMessage.
++ * Changed the callerIDStatus report structure.
++ *
++ * Revision 1.34 1996/08/29 00:36:57 liang
++ * Added kLapmTxFrameStatus and kLapmRxFrameStatus.
++ *
++ * Revision 1.33 1996/08/27 22:56:01 liang
++ * Added kResetHardware status code.
++ *
++ * Revision 1.32 1996/08/23 23:35:35 liang
++ * Add kATDebugStatus and function SoftModemGetHybridDelay.
++ *
++ * Revision 1.31 1996/08/22 01:13:19 yg
++ * Added AT command processor.
++ *
++ * Revision 1.30 1996/08/12 21:46:47 mwg
++ * Added code to report capabilities.
++ *
++ * Revision 1.29 1996/08/10 01:59:59 mwg
++ * Added report of the sent rate sequence;
++ *
++ * Revision 1.28 1996/08/07 22:15:02 mwg
++ * Added new status reports:
++ * kRemoteFreqOffset
++ * kIEECDeactivated
++ * kPFEECDeactivated
++ *
++ * Revision 1.27 1996/06/27 05:15:48 mwg
++ * Added V.24 circuit status.
++ *
++ * Revision 1.26 1996/06/27 02:12:43 mwg
++ * Cleaned the code.
++ *
++ * Revision 1.25 1996/06/20 23:57:30 mwg
++ * Added new training progress status.
++ *
++ * Revision 1.24 1996/06/18 21:13:50 mwg
++ * Added trellis MSE data logging.
++ *
++ * Revision 1.23 1996/06/12 02:31:10 mwg
++ * Added new type: VeryLong
++ *
++ * Revision 1.22 1996/06/08 22:15:39 mwg
++ * Added new status report: kCleardownStarted
++ * Added new field for the features: kV34bisEnabled
++ *
++ * Revision 1.21 1996/05/31 00:29:11 liang
++ * Add feature bit kV34ExtraINFOPreamble.
++ *
++ * Revision 1.20 1996/05/30 23:28:31 mwg
++ * Replaced enums with #defines
++ *
++ * Revision 1.19 1996/05/25 00:38:27 mwg
++ * Added kProjectedDataRate training progress report.
++ *
++ * Revision 1.18 1996/05/24 23:27:15 mwg
++ * Added mode status codes.
++ *
++ * Revision 1.17 1996/05/10 05:39:59 liang
++ * Move the includes for DEBUG inside "ifndef SoftModemTypes" so that
++ * cap build won't break.
++ *
++ * Revision 1.16 1996/05/08 01:49:34 mwg
++ * Added capability to setup auxiliary data channel handlers.
++ *
++ * Revision 1.15 1996/05/07 22:51:08 liang
++ * Added group delay estimation and improved symbol rate selection process.
++ *
++ * Revision 1.14 1996/05/06 06:49:09 mwg
++ * Fixed linux problems.
++ *
++ * Revision 1.13 1996/05/02 08:40:16 mwg
++ * Merged in Chromatic bug fixes.
++ *
++ * Revision 1.12 1996/05/02 02:26:21 mwg
++ * Added code to implement dozing functionality for v.34.
++ *
++ * Revision 1.11 1996/05/01 22:43:13 mwg
++ * Added new command: kDozeCmd;
++ *
++ * Revision 1.10 1996/05/01 19:20:16 liang
++ * Add command codes kInitiateRetrainCmd and kInitiateRateRenegotiationCmd.
++ *
++ * Revision 1.9 1996/04/25 01:12:37 mwg
++ * Added new flag: rapid preliminary EC training.
++ *
++ * Revision 1.8 1996/04/20 02:26:22 mwg
++ * Added preliminary far-end echo support
++ *
++ * Revision 1.7 1996/04/15 23:26:16 mwg
++ * Changed flag definitions for v34 modem.
++ *
++ * Revision 1.6 1996/04/04 02:35:50 liang
++ * Change kCid from 0x0080 to 0x0004 (0x0080 is defined as kV32).
++ *
++ * Revision 1.5 1996/03/08 23:07:01 mwg
++ * Added name for the struct.
++ *
++ * Revision 1.4 1996/03/02 00:59:27 liang
++ * Added typedef for V34CodingParameters structure.
++ *
++ * Revision 1.3 1996/02/27 02:28:31 mwg
++ * Fixed a bug in kLapmLongADPEnabled definition.
++ *
++ * Revision 1.2 1996/02/19 23:50:59 liang
++ * Removed compressionSetup parameter from the link layer command structure.
++ *
++ * Revision 1.1.1.1 1996/02/14 02:35:13 mwg
++ * Redesigned the project directory structure. Merged V.34 into the project.
++ *
++ * Revision 1.5 1996/01/15 23:26:04 liang
++ * Change the softmodem command structure name from SoftwareModemCommand
++ * to SoftwareModemCommandParameters.
++ *
++ *****************************************************************************/
++#ifndef SoftModemPh
++#define SoftModemPh
++
++/****************************************************************************/
++/* 1. Type definitions. */
++/* */
++/* 1.1 General types */
++/****************************************************************************/
++
++#ifndef SM_DECL
++#define SM_DECL
++#endif
++
++#ifdef __VxWORKS__
++#include <types/vxTypesOld.h>
++#endif
++
++#ifdef DEBUG
++/* We have to define __wchar_t for Linux */
++#if defined __linux__ && !defined _NO_WHCAR_DEF_
++typedef long int __wchar_t;
++#endif
++#if !defined(__KERNEL__) && !defined(_CFE_)
++#include <stdio.h>
++#include <stdlib.h>
++#endif
++
++#if defined(__linux__) || defined (__unix__) || defined (__unix) || (defined (__mips__) && !defined(_CFE_) && !defined(VXWORKS) && !defined(TARG_OS_RTEMS))/* enable if necessary, but not for dos-based builds */
++#include <linux/types.h>
++#endif
++
++
++#endif /* DEBUG */
++
++#if defined(W95_DRIVER)
++#pragma code_seg("_LTEXT", "LCODE")
++#pragma data_seg("_LDATA", "LCODE")
++#pragma const_seg("_LDATA", "LCODE")
++#pragma bss_seg("_LDATA", "LCODE")
++#pragma pack(1)
++#endif /* W95_DRIVER */
++
++#ifndef SoftModemTypes
++#include "SoftModemTypes.h"
++#endif /* SoftModemTypes */
++
++
++typedef struct
++ {
++ schar x, y;
++ } ComplexByte;
++
++typedef struct
++ {
++ uchar numerator;
++ uchar denominator;
++ } Ratio;
++
++#ifdef PEGASUS
++typedef union
++ {
++ struct
++ {
++ short x, y;
++ };
++
++ long foo;
++ } ComplexShort;
++#else
++typedef struct
++ {
++ short x, y;
++#ifdef GREENHILL
++ long a[0];
++#endif
++ } ComplexShort;
++#endif
++
++typedef struct
++ {
++ long x, y;
++ } ComplexLong;
++
++typedef struct
++ {
++ ushort x0, x1, x2;
++ short x3;
++ } VeryLong;
++
++typedef union
++ {
++ struct
++ {
++ uchar number;
++ uchar defaultValue; /* default value */
++ uchar maxValue; /* max allowed value */
++ uchar minValue; /* should be greater then maxValue to make reg readonly */
++ } param;
++ long alignment;
++ } SRegisterDefinition;
++
++#define MacroPaste2(a,b) a##b
++#define MacroPaste(a,b) MacroPaste2(a,b)
++#define ALWAYS_LONG_ALIGN() long MacroPaste(ALIGNMENT,__LINE__);
++
++#ifdef USE_LONG_ALIGN
++#define LONG_ALIGN() ALWAYS_LONG_ALIGN()
++#else
++#define LONG_ALIGN()
++#endif
++
++typedef ulong bitMap;
++
++typedef int pace;
++#define kStop 0
++#define kVerySlow 1
++#define kSlow 2
++#define kMedium 3
++#define kFast 4
++
++
++/****************************************************************************/
++/* 1. Type definitions. */
++/* */
++/* 1.2 Modem specific types */
++/****************************************************************************/
++
++typedef long directionType;
++#define kXmt 0
++#define kRcv 1
++#define kXmtRcv 2
++
++
++#define originating kXmt
++#define answering kRcv
++#define kOrg kXmt
++#define kAns kRcv
++#define kOrgAns kXmtRcv
++
++#define ORIGINATING originating
++#define ANSWERING answering
++
++typedef int pcmCodingType;
++#define kMuLawPCM 0
++#define kALawPCM 1
++
++#define kMuLawPCMScaleShift 2
++#define kALawPCMScaleShift 3
++
++/* link layer and framer share defines */
++typedef bitMap framerType;
++typedef bitMap linkLayerType;
++#define kNoFramer 0
++#define kSync 0x00000001
++#define kAsync 0x00000002
++#define kHDLC 0x00000004
++#define kLapm 0x00000008
++#define kMnp 0x00000010
++#define kV70 0x00000020
++#define kSAM 0x00000040
++
++
++typedef bitMap modulationMap;
++typedef bitMap symbolRateMap;
++typedef bitMap dataRateMap;
++typedef bitMap featureMap;
++typedef bitMap breakType;
++
++typedef bitMap audioType;
++#define kRawAudio 0
++#define kAudioG729A 1
++#define kAudioG729 2
++#define kAudioG723 3
++
++
++#ifndef ADSL_MODEM
++typedef long modemStatusCode;
++#endif
++ /* Information status Codes: 1-31 */
++#define kSetSampleRate 1
++#define kModulationKnown 2
++#define kRxSymbolRate 3
++#define kTxSymbolRate 4
++#define kRxCarrierFreq 5
++#define kTxCarrierFreq 6
++#define kTxPreemphasisFilter 7
++#define kTxPowerAdjustment 8
++#define kRemoteTxPreemphasisFilter 9
++#define kRemoteTxPowerAdjustment 10
++#define kRxRateKnown 11
++#define kTxRateKnown 12
++#define kRxDataModeActive 13
++#define kTxDataModeActive 14
++#define kTxSignalCompleted 15
++#define kDTMFSignalDetected 16
++#define kModemSignalDetected 17
++#define kCallProgressSignalDetected 18
++#define kCustomSignalDetected 19
++#define kFaxPreambleDetected 20
++#define kV24CircuitStatusChange 21
++#define kHookStateChange 22
++#define kCallWaitingToneDetected 23
++#define kMultiToneSignalDetected 24
++#define kPulseShuntStateChange 25
++#define kRingFrequency 26
++
++
++ /* Warning status Codes: 32-64 */
++#define kError 32
++#define kV34Exception 33
++#define kClearDownLocal 34
++#define kClearDownRemote 35
++#define kCarrierPresent 36
++#define kCarrierLost 37
++#define kRetrainingLocal 38
++#define kRetrainingRemote 39
++#define kRateRenegotiationLocal 40
++#define kRateRenegotiationRemote 41
++#define kFallbackStarted 42
++#define kFallForwardStarted 43
++#define kCleardownStarted 44
++#define kIllegalCommand 45
++
++ /* Auxiliary status Codes: 64-.. */
++#define kTrainingProgress 64
++#define kConnectionInfo 65
++#define kDialerStatus 66
++#define kFramingInfo 67
++#define kBreakReceived 68
++#define kLapmStatus 69
++#define kLapmParameter 70
++#define kV42bisStatus 71
++#define kCallerIDStatus 72
++#define kIOStatus 73
++#define kCapabilitiesStatus 74
++#define kSpeakerStatus 75
++#define kATProfileChanged 76
++#define kATDebugStatus 77
++#define kResetHardware 78
++#define kV8bisStatus 79
++#define kMnpStatus 80
++#define kMnpParameter 81
++#define kV70Status 82
++#define kV70Parameter 83
++#define kFaxClass2Status 84
++#define kAudioStatus 85
++#define kAudioParameter 86
++#define kOverlayStatus 87
++#define kCallerIDCircuitStatus 88
++#define kV80Status 89
++#define kV80Parameter 90
++#define kLocalCountryChanged 91
++#define kDTERateChanged 92
++#define kATResponse 93
++#define kFramerConfigured 94
++#define kA8RStatus 95
++#define kA8TStatus 96
++#define kVersionStatus 97
++
++ /* Testing status codes: 128-... */
++ /* These statuses are generated by modem test suit */
++#define kTestFinished 128
++#define kConnectivityTestFinished 129
++#define kTestCheckSum 130
++#define kLogFileControl 131
++#define kTestAtmVcFinished 132
++#define kTestClearEocFinished 133
++#define kTestG997Finished 134
++
++typedef long modemErrorCode;
++#define kNoError 0
++#define kErrorTimerExpired 1
++#define kErrorNoSReceived 2
++#define kErrorNoSbarReceived 3
++
++
++typedef long dialerStatusCode;
++#define kDialCompleted 0
++#define kNoDialToneDetected 1
++#define kBongToneDetected 2
++#define kNoBongToneDetected 3
++#define kErrorIllegalDialModifier 5
++#define kDialStarted 6
++#define kExternalPulseDialDigit 7
++
++
++typedef long framingInfoCode;
++#define kRxFrameOK 0
++#define kRxFrameTooLong 1
++#define kRxFrameCRCError 2
++#define kTxFrameUnderrun 3
++#define kRxFrameOverrun 4
++#define kRxFrameAborted 5
++#define kRxFrameParityError 6
++#define kRxFrameFormatError 7
++#define kRxFrameHDLCFlagsDetected 8
++
++
++typedef long IOStatusCode;
++#define kRxDataReady 0
++#define kRxBufferOverflow 1
++#define kTxSpaceAvailable 2
++#define kTxBufferEmpty 3
++
++typedef long capabilitiesStatusCode;
++#define kSymbolRates 0
++#define kDataRates 1
++#define kFeatures 2
++#define kDemodCapabilities 3
++#define kRateThresholdAdjustment 4
++#define kXmtLevel 5
++#define kHybridDelay 6
++#define kAuxFeatures 7
++
++
++typedef long A8TStatusCode;
++#define kA8TFinished 0
++
++typedef long callerIDStatusCode;
++#define kCallerIDError 0
++#define kCallerIDChannelSeizureReceived 1
++#define kCallerIDMarkSignalReceived 2
++#define kCallerIDTime 3
++#define kCallerIDTelnum 4
++#define kCallerIDName 5
++#define kCallerIDEnd 6
++#define kCallerIDUnknownMessage 7
++#define kCallerIDWholeMessage 8
++
++
++typedef long callerIDErrorCode;
++#define kCallerIDNoError 0
++#define kCallerIDMarkSignalError 1
++#define kCallerIDTooManyMarkBits 2
++#define kCallerIDMessageTooLong 3
++#define kCallerIDChecksumError 4
++
++
++typedef long connectionInfoCode;
++#define kRTDelay 1
++#define kRxSignalLevel 2
++#define kTimingOffset 3
++#define kFreqOffset 4
++#define kPhaseJitter 5
++#define kSNR 6
++#define kNearEchoLevel 7
++#define kSER 8
++#define kNearEndDelay 9
++#define kFarEchoLevel 10
++#define kL1L2SNRDifference 11
++#define kDCOffset 12
++#define kTotalRxPower 13
++#define kRemoteFreqOffset 14
++/* obsolete #define kV8MenuDataWord1 15 */
++/* obsolete #define kV8MenuDataWord2 16 */
++#define kPCMP2AnalogDetSNR 17
++#define kPCMP2DigitalDetSNR 18
++#define kPCMP2RBSDetSNR 19
++#define kEqCenterTapOffset 20
++#define kPCMPadValue 21
++#define kPCMRBSMap 22
++#define kPCMCodingType 23
++#define kPCMSpectralShapingBits 24
++#define kLoopbackSelfTestResult 25
++#define kEyeQuality 26
++#define kLoopbackSelfTestNewErrs 27
++#define kV34EqlLengthStatus 28
++#define kV34EqlOffsetStatus 29
++#define kV8CallMenuData 30
++#define kV8JointMenuData 31
++#define kPCMClientIeecLengthStatus 32
++#define kPCMClientIeecOffsetStatus 33
++#define kSeamlessRateChange 34
++
++typedef long trainingProgressCode;
++#define kPeriodicalSignalDetected 0
++#define kPhaseReversalDetected 1
++#define kSignalStartDetected 2
++#define kSignalEndDetected 3
++#define kSSignalDetected 4
++#define kSbarSignalDetected 5
++#define kJ4SignalDetected 6
++#define kJ16SignalDetected 7
++#define kJprimeSignalDetected 8
++#define kMPSignalDetected 9
++#define kMPprimeSignalDetected 10
++#define kMPSignalSent 11
++#define kMPprimeSignalSent 12
++#define kRateSignalDetected 13
++#define kESignalDetected 14
++#define kRateSignalSent 15
++
++#define kAutomodingTryModulation 16
++#define kAutomodingCompleted 17
++#define kRCFaxBitMapStatus 18
++
++#define kV8CIDetected 19
++#define kV8ANSToneDetected 20
++#define kV8ANSamDetected 21
++#define kV8CMDetected 22
++#define kV8JMDetected 23
++#define kV8CJDetected 24
++#define kV8Finished 25
++
++#define kV34Phase2Started 26
++#define kV34Phase2INFOSequenceDetected 27
++#define kV34Phase2NearEndEchoDetected 28
++#define kV34Phase2L1Receiving 29
++#define kV34Phase2L2Receiving 30
++#define kV34Phase2Finished 31
++#define kV34Phase3Started 32
++#define kV34Phase3Finished 33
++#define kV34Phase4Started 34
++#define kV34Phase4Finished 35
++#define kV34DecoderParameters 36
++#define kV34EncoderParameters 37
++
++#define kMaxLocalRxDataRate 38
++#define kMaxLocalTxDataRate 39
++#define kMaxRemoteRxDataRate 40
++#define kMaxRemoteTxDataRate 41
++#define kProjectedDataRate 42
++#define kFEECDeactivated 43
++#define kIEECDeactivated 44
++#define kPFEECDeactivated 45
++#define kPhaseJitterDeactivated 46
++
++#define kPCMP2DetectedDigitalConnection 47
++#define kPCMP2DetectedRBS 48
++#define kX2DetectedPhase1Escape 49
++
++#define kStarted1200BpsTraining 50
++#define kStarted2400BpsTraining 51
++#define kUnscrambledOneDetected 52
++#define kScrambled1200BpsOneDetected 53
++#define kScrambled2400BpsOneDetected 54
++#define kV22BisS1Detected 55
++#define kV22InitiateLoop2Test 56
++#define kV22RespondLoop2Test 57
++#define kV22Loop2TestAlt01Detected 58
++
++#define kDataModemLoop1TestStarted 59
++#define kDataModemLoop1TestFinished 60
++#define kDataModemLoop2TestStarted 61
++#define kDataModemLoop2TestFinished 62
++#define kDataModemLoop3TestStarted 63
++#define kDataModemLoop3TestFinished 64
++#define kDataModemSelfLoopTestEnabled 65
++
++#define kPCMPhase3Started 70
++#define kPCMPhase3Finished 71
++#define kPCMPhase4Started 72
++#define kPCMPhase4Finished 73
++
++#define kV90JaSignalDetected 74
++#define kV90JdSignalDetected 75
++#define kV90JdPrimeSignalDetected 76
++#define kV90RSignalDetected 77
++#define kV90RBarSignalDetected 78
++#define kV90CPSignalDetected 79
++
++#define kV90CPtSignalSent 80
++#define kV90CPSignalSent 81
++#define kV90CPprimeSignalSent 82
++
++
++#define kV34SeamlessRateChangeRequestSent 83
++#define kV34SeamlessRateChangeUpdateSent 84
++#define kV34SeamlessRateChangeRequestReceived 85
++#define kV34SeamlessRateChangeUpdateReceived 86
++#define kV34SeamlessRateChangeUpdateTimeout 87
++
++#define kV90JaSignalAcknowledged 88
++
++#define kV34HCtrlChanPPhDetected 100
++#define kV34HCtrlChanMPhDetected 101
++#define kV34HCtrlChanRatesKnown 102
++#define kV34HDXCtrlChanBinary1Detected 103
++#define kV34HDXPhase3Started 104
++#define kV34HDXPhase3Finished 105
++#define kV34HDXPrimChanBinary1Detected 106
++#define kFlexEventTRN2AFinished 107
++
++#define kV32RanginigStarted 108
++#define kV32RangingStarted 108
++#define kV32RanginigFinished 109
++#define kV32RangingFinished 109
++
++
++typedef long lapmStatusCode;
++#define kLapmDisconnected 0 /* LAPM disconnected */
++#define kLapmConnected 1 /* LAPM is connected */
++#define kLapmV42ODPDetected 2 /* LAPM ODP is detected */
++#define kLapmV42ADPDetected 3 /* LAPM V.42 ADP is detected */
++#define kLapmUnknownADPDetected 4 /* LAPM Unsupported ADP is detected */
++#define kLapmTimeout 5 /* LAPM Timeout */
++#define kLapmMNPFrameDetected 6 /* LAPM detected MNP frame */
++#define kLapmDPDetectionTimedOut 7 /* LAPM Unsupported ADP is detected */
++#define kLapmError 8 /* LAPM Error */
++#define kLapmTestResult 9 /* LAPM loopback test result */
++#define kLapmTxFrameStatus 10
++#define kLapmRxFrameStatus 11
++#define kLapmTxStatistics 12
++#define kLapmRxStatistics 13
++
++typedef long lapmTakedownReason;
++#define kLapmRemoteDisconnect 0
++#define kLapmLocalDisconnect 1
++#define kLapmCannotConnect 2
++#define kLapmProtocolError 3
++#define kLapmCompressionError 4
++#define kLapmInactivityTimer 5
++#define kLapmRetryFailed 6
++
++
++typedef long lapmParameterCode;
++#define kLapmXmtK 0
++#define kLapmRcvK 1
++#define kLapmXmtN401 2
++#define kLapmRcvN401 3
++#define kLapmTESTSupport 4
++#define kLapmSREJSupport 5
++#define kLapmCompDir 6
++#define kLapmCompDictSize 7
++#define kLapmCompStringSize 8
++
++
++typedef long lapmErrorCode;
++#define kLapmNoError 0
++#define kLapmBufferOverflow 1
++#define kLapmFrameTooLong 2
++#define kLapmBadFrame 3
++#define kLapmUnknownEvent 4
++/* 6 is reserved for kLapmRetryFailed defined above */
++
++
++typedef long lapmTestResultCode;
++#define kLapmTestPassed 0
++#define kLapmTestRequestIgnored 1
++#define kLapmTestAlreadyInProgress 2
++#define kLapmTestNotSupported 3
++#define kLapmTestFailed 4
++
++
++typedef long v42bisStatusCode;
++#define kV42bisEncoderTransparentMode 0 /* V.42bis encoder transparent mode active */
++#define kV42bisEncoderCompressedMode 1 /* V.42bis encoder compressed mode active */
++#define kV42bisDecoderTransparentMode 2 /* V.42bis decoder transparent mode active */
++#define kV42bisDecoderCompressedMode 3 /* V.42bis decoder compressed mode active */
++#define kV42bisError 4 /* V.42bis error */
++#define kV42bisEncoderStatistics 5
++#define kV42bisDecoderStatistics 6
++
++
++typedef long v42bisErrorCode;
++#define kV42bisUndefinedEscSequence 0 /* V.42bis undefined escape sequence */
++#define kV42bisCodewordSizeOverflow 1 /* V.42bis codeword size overflow */
++#define kV42bisUndefinedCodeword 2 /* V.42bis undefined codeword */
++
++typedef long mnpStatusCode;
++#define kMnpDisconnected 0 /* Mnp disconnected */
++#define kMnpConnected 1 /* Mnp is connected */
++#define kMnpFallback 2 /* Mnp is falling back to buffer mode */
++#define kMnpError 3 /* Mnp Error */
++#define kMnpTimeout 4 /* Mnp Timeout */
++#define kMnpInvalidLT 5 /* Invalid LT received */
++#define kMnpRetransmitFrame 6
++#define kMnpNack 7
++#define kMnpTxFrameStatus 8
++#define kMnpRxFrameStatus 9
++#define kMnpTxStatistics 10
++#define kMnpRxStatistics 11
++
++typedef long mnpTakedownReason;
++#define kMnpRemoteDisconnect 0
++#define kMnpLocalDisconnect 1
++#define kMnpCannotConnect 2
++#define kMnpProtocolError 3
++#define kMnpCompressionError 4
++#define kMnpInactivityTimer 5
++#define kMnpRetryFailed 6
++
++
++typedef long mnpParameterCode;
++#define kMnpProtocolLevel 0
++#define kMnpServiceClass 1
++#define kMnpOptimizationSupport 2
++#define kMnpCompressionSupport 3
++#define kMnpN401 4
++#define kMnpK 5
++
++
++typedef long mnpErrorCode;
++#define kMnpNoError 0
++#define kMnpBufferOverflow 1
++#define kMnpFrameTooLong 2
++#define kMnpBadFrame 3
++#define kMnpUnknownEvent 4
++
++
++typedef long v70StatusCode;
++#define kV70Disconnected 0 /* V70 disconnected */
++#define kV70Connected 1 /* V70 is connected */
++#define kV70Error 2 /* V70 Error */
++#define kV70Timeout 3 /* V70 Timeout */
++#define kV70ChannelDown 4 /* V70 channel released */
++#define kV70ChannelUp 5 /* V70 channel established */
++#define kV70AudioChannelDown 6 /* V70 audio channel released */
++#define kV70AudioChannelUp 7 /* V70 audio channel established */
++#define kV70DataChannelDown 8 /* V70 data channel released */
++#define kV70DataChannelUp 9 /* V70 data channel established */
++#define kV70OOBChannelDown 10 /* V70 out-of-band channel released */
++#define kV70OOBChannelUp 11 /* V70 out-of-band channel established */
++#define kV70TxFrameStatus 12
++#define kV70RxFrameStatus 13
++#define kV70TxStatistics 14
++#define kV70RxStatistics 15
++#define kV70StateTransition 16
++
++typedef long v70TakedownReason;
++#define kV70RemoteDisconnect 0
++#define kV70LocalDisconnect 1
++#define kV70CannotConnect 2
++#define kV70ProtocolError 3
++#define kV70CompressionError 4
++#define kV70InactivityTimer 5
++#define kV70RetryFailed 6
++
++
++typedef long v70ParameterCode;
++#define kV70SuspendResume 0
++#define kV70CrcLength 1
++#define kV70NumberOfDLCs 2
++#define kV70uIH 3
++
++#define kV70LapmXmtK 10
++#define kV70LapmRcvK 11
++#define kV70LapmXmtN401 12
++#define kV70LapmRcvN401 13
++#define kV70LapmTESTSupport 14
++#define kV70LapmSREJSupport 15
++#define kV70LapmCompDir 16
++#define kV70LapmCompDictSize 17
++#define kV70LapmCompStringSize 18
++
++#define kV70AudioHeader 20 /* if audio header is present in audio frames */
++#define kV70BlockingFactor 21 /* audio blocking factor (default 1) */
++#define kV70SilenceSuppression 22 /* audio silence suppression */
++
++
++
++typedef long v70ErrorCode;
++#define kV70NoError 0
++#define kV70BadFrame 1
++
++typedef long audioStatusCode;
++#define kAudioFramesLost 0 /* One or more audio frames were lost */
++#define kAudioTxBufferOverflow 1
++#define kAudioRxBufferOverflow 2
++#define kAudioRxBufferUnderflow 3
++
++
++typedef long v80StatusCode;
++#define kV80Disconnected 0 /* V80 disconnected */
++#define kV80Connected 1 /* V80 is connected */
++#define kV80Error 2 /* V80 Error */
++#define kV80InBandStatus 3 /* V80 in-band SAM status */
++#define kV80TxFrameStatus 12
++#define kV80RxFrameStatus 13
++#define kV80TxStatistics 14
++#define kV80RxStatistics 15
++
++typedef long v80TakedownReason;
++#define kV80RemoteDisconnect 0
++#define kV80LocalDisconnect 1
++
++typedef long v80ErrorCode;
++#define kV80NoError 0
++#define kV80BadFrame 1
++
++typedef long overlayStatusCode;
++#define kOverlayBegin 0 /* DSP has halted */
++#define kOverlayEnd 1 /* DSP has received entire overlay */
++#define kOverlayElapsedTime 2 /* time elapsed(as viewed by datapump) during overlay */
++#define kOverlayRecordingData 3 /* ms of data that we are recording */
++#define kOverlayReplayingData 4 /* ms of data that we have replayed so far */
++#define kOverlayReplayDone 5 /* playback is done */
++
++/* types for kOverlayRecording/ReplayingData */
++#define kOverlayTxData 0
++#define kOverlayRxData 1
++
++/*
++ * Rockwell faxmodem compatible bitmap (kRCFaxBitMapStatus)
++ */
++#define kRCFaxFCD 0x01
++#define kRCFaxP2 0x02
++#define kRCFaxPN 0x04
++#define kRCFaxDCD 0x08
++#define kRCFaxTX 0x10
++#define kRCFaxCTS 0x20
++
++
++#ifndef ADSL_MODEM
++typedef long modemCommandCode;
++#endif
++ /* Basic Action commands 00-63 */
++#define kIdleCmd 0
++#define kStartFaxModemCmd 1
++#define kStartDataModemCmd 2
++#define kStartCallProgressMonitorCmd 3
++#define kSendTonesCmd 4
++#define kStartCallerIDRcvCmd 5
++#define kSetLinkLayerCmd 6
++#define kSetFramerCmd 7
++#define kTestLinkLayerCmd 8
++#define kIdleRcvCmd 9
++#define kIdleXmtCmd 10
++#define kSetStatusHandlerCmd 11
++#define kSetEyeHandlerCmd 12
++#define kSetLogHandlerCmd 13
++#define kSendBreakCmd 14
++#define kSendTestCmd 15
++#define kDisconnectLinkCmd 16
++#define kSetXmtGainCmd 17
++#define kStartADSICmd 18
++#define kSetHybridDelayCmd 19
++#define kCleardownCmd 20
++#define kInitiateRetrainCmd 21
++#define kInitiateRateRenegotiationCmd 22
++#define kDialToneIndicator 23
++#define kSetRxDataHandler 24 /* not used yet */
++#define kSetTxDataHandler 25 /* not used yet */
++#define kSetAuxRxDataHandler 26
++#define kSetAuxTxDataHandler 27
++#define kRingIndicatorCmd 28
++#define kDTERateIndicatorCmd 29
++#define kStartV8bisCmd 30
++#define kSendMultiTonesCmd 31
++#define kSetMultiToneParamsCmd 32
++#define kSetModemSampleRateCmd 33
++#define kStartDataModemPTTTestCmd 34
++#define kStartDataModemLoopbackTestCmd 35
++#define kRingFrequencyCmd 36
++#define kSetCallWaitingDetectorStateCmd 37
++#define kV34HDXTurnOffCurrentModeCmd 38
++#define kSetAudioCmd 39
++#define kLoopbackTestAutoRespEnableCmd 40
++#define kSetCallProgressParamsCmd 41
++#define kSetTrainingDelayReductionCmd 42
++#define kSetFaxECMPageBufferPtrCmd 43
++#define kSetLineCurrentStateCmd 44
++#define kSetFramerParameterCmd 45
++#define kStartDozeCmd 46
++#define kEndDozeCmd 47
++#define kStartRingFrequencyDetectorCmd 48
++#define kSetBufferingDelayAdjustmentCmd 49
++
++ /* Composite action commands 64-127 */
++#define kDialCmd 64
++#define kSendCallingToneCmd 65
++#define kV24CircuitChangeCmd 66
++#define kStartATModeCmd 67
++#define kStopATModeCmd 68
++#define kSetATRegister 69
++#define kSetATRegisterLimits 70
++#define kSetATIResponse 71
++#define kEnableATDebugMode 72
++#define kSetWhiteListEntry 73
++#define kSetBlackListEntry 74
++
++#define kV70Setup 75 /* additional V70 configuration */
++#define kEstablishChannel 76 /* Establish new link layer channel (V70) */
++#define kReleaseChannel 77 /* Release link layer channel (V70) */
++#define kWaitChannelEstablished 78 /* Wait for establishment of the new link layer channel (V70) */
++
++/* unused 79 */
++#define kMnpOOBFrameCmd 80
++#define kV80InBandCmd 81 /* V80 In-band commands */
++#define kSetV250IdString 82
++#define kSetInternationalTablesCmd 83
++#define kConfigureCountryCmd 84
++#define kConigureCountryCmd 84
++#define kV8ControlCmd 85
++#define kV8bisSendMessage 86
++#define kSetHWIdCmd 87
++#define kSetCodecIdCmd 88
++#define kOverCurrentDetected 89
++
++
++
++typedef long v8ControlType;
++#define kEnableDTEControl 1
++#define kSetV8ControlTimeout 2
++#define kSetCIValue 3
++#define kSetCMValue 4
++#define kSetJMValue 5
++#define kSendCJ 6
++#define kSetCallFunctionCategory 7
++
++typedef long v250IdStringCode;
++#define kGMIString 1
++#define kGMMString 2
++#define kGMRString 3
++#define kGSNString 4
++#define kGOIString 5
++
++typedef long kCallProgressParameterCode;
++#define kModemSignalPowerThreshold 1
++#define kDialtonePowerThreshold 2
++#define kRingBackPowerThreshold 3
++#define kBusyPowerThreshold 4
++#define kReorderPowerThreshold 5
++#define k2ndDTnPowerThreshold 6
++#define kMinDialtoneTime 7
++#define kDialtoneFreqRange 8
++#define kRingBackFreqRange 9
++#define kBusyFreqRange 10
++#define kReorderFreqRange 11
++#define k2ndDTnFreqRange 12
++
++
++typedef long framerParameterCode;
++#define kSetHDLCLeadingFlags 0
++#define kHDLCResetFlagDetection 1
++#define kSyncFramerSetup 2
++#define kHDLCSendCRC 3
++#define kHDLCSendFlags 4
++#define kHDLCSendAborts 5
++
++
++typedef long logDataCode;
++#define eyeData 0
++#define mseData 1
++#define rxData 2
++#define txData 3
++#define neecData 4
++#define eqlData 5
++#define ieecData 6
++#define feecData 7
++#define eqlPllData 8
++#define feecPllData 9
++#define timingData 10
++#define pjPhaseErrData 11
++#define pjEstimateData 12
++#define pjEstDiffData 13
++#define pjCoefData 14
++#define inputSignalData 15
++#define outputSignalData 16
++#define agcGainData 17
++#define automoderData 18
++#define v8CMData 19
++#define v8JMData 20
++#define inputAfterNeecData 21
++#define eqlErrData 22
++#define dpskMicrobitsData 23
++#define v34P2LSamplesData 24
++#define phaseSplittedLData 25
++#define fftedLData 26
++#define channelSNRData 27
++#define noiseEstimateData 28
++#define signalEstimateData 29
++#define v34INFOData 30
++#define v34ChanProbData 31
++#define v34P2OutputData 32
++#define v8ANSamDetectData 33
++#define pFeecData 34
++#define channelDelayData 35
++#define timingOffsetData 36
++#define trellisMSEData 37
++#define interpolatedSignalData 38
++#define dcCancelledSignalData 39
++#define echoCancelledSignalData 40
++#define predictorErrData 41
++#define commandInfoData 42
++#define unusedInfoData 43
++#define atCommandInfoData 44
++#define atResponseInfoData 45
++#define hwTerminalTxData 46
++#define hwTerminalRxData 47
++#define statusInfoData 48
++#define channelResponseData 49
++#define channelImpulseRespData 50
++#define x2PcmP1DetectorInData 51
++#define x2PcmP1DetectorOutData 52
++#define eqlRealData 53
++#define ieecRealData 54
++#define neecOutputData 55
++#define precodedEqlOutputData 56
++#define eqlRealErrData 57
++#define idealEqlOutputData 58
++#define agcData 59
++#define pcmInfidelityData 60
++#define v42bisCycleCount 61
++#define pcmImdOffsetCoefData 62
++#define pcmImdOffsetData 63
++#define v90RcvdDilLongData 64
++#define v90RcvdDilShortData 65
++#define v90DilProducedData 66
++#define pcmEncoderKbitsData 67
++#define pcmEncoderMbitsData 68
++#define pcmEncoderSbitsData 69
++#define pcmDecoderKbitsData 70
++#define pcmDecoderMbitsData 71
++#define pcmDecoderSbitsData 72
++#define v90CPorCPtData 73
++#define mnpDecoderInputData 74
++#define mnpDecoderOutputData 75
++#define v42bisEncoderInputData 76
++#define v42bisDecoderInputData 77
++#define modulatorInputData 78
++#define modulatorOutputData 79
++#define encodedStatusData 80
++#define blockFramerTxData 81
++#define blockFramerRxData 82
++#define framerTxData 83
++#define framerRxData 84
++#define dpskBasebandData 85
++#define dpskBasebandLPFedData 86
++#define dpskRealData 87
++#define bandEdgeCorrectedSignalData 88
++#define atmLogData 89
++#define clearEocLogData 90
++#define g997LogData 91
++
++
++#define kLogDataDelimiter 0xFEFEFEFE
++
++/****************************************************************************/
++/* 1. Type definitions. */
++/* */
++/* 1.3 Handlers */
++/****************************************************************************/
++
++typedef void (SM_DECL *rcvHandlerType) (void *gDslVars, int, short*);
++typedef void (SM_DECL *xmtHandlerType) (void *gDslVars, int, short*);
++typedef int (SM_DECL *xmtHandlerWithRtnValType) (void *gDslVars, int, short*);
++typedef void (SM_DECL *timerHandlerType) (void *gDslVars, long);
++typedef int (SM_DECL *interpolatorHandlerType) (void *gDslVars, int, short*, short*);
++typedef void (SM_DECL *controlHandlerType) (void *gDslVars, int);
++
++typedef int (SM_DECL *txDataHandlerType) (void *gDslVars, int, uchar*);
++typedef int (SM_DECL *rxDataHandlerType) (void *gDslVars, int, uchar*);
++
++typedef bitMap (SM_DECL *signalDetectorType) (void *gDslVars, int, long, long*);
++
++
++typedef void (SM_DECL *hookHandlerType) (void *gDslVars, Boolean);
++
++typedef short* (SM_DECL *sampBuffPtrType) (void *gDslVars, int);
++
++typedef void (SM_DECL *eyeHandlerType) (void *gDslVars, int, ComplexShort*);
++typedef void (SM_DECL *logHandlerType) (void *gDslVars, logDataCode, ...);
++
++typedef void (SM_DECL *voidFuncType) (void *gDslVars);
++
++typedef int (SM_DECL *txAudioHandlerType) (void *gDslVars, int, short*);
++typedef int (SM_DECL *rxAudioHandlerType) (void *gDslVars, int, short*);
++
++
++/****************************************************************************/
++/* 1. Type definitions. */
++/* */
++/* 1.4 Structures */
++/****************************************************************************/
++
++/*
++ * AT command processor definitions
++ */
++#define kATRegistersNumber 56
++#define kFirstConfigurationRegister 500
++#define kLastConfigurationRegister 515
++#define kFirstInternationalRegister 516
++#define kLastInternationalRegister 595
++
++
++
++#define kATMaxDialStringSize 128
++typedef struct
++ {
++ struct
++ {
++ uchar loadNumber; /* Which profile to load upon powerup/reset */
++ uchar countryCode; /* T.35 Country Code */
++ uchar profile[2][kATRegistersNumber];
++ uchar dialString[4][kATMaxDialStringSize + 1];
++ } config;
++ ulong versionCode;
++ ulong crcCheckSum;
++ } NVRAMConfiguration;
++
++/* Structure to hold international settings */
++typedef struct
++ {
++ char *name;
++ int countryCode;
++ const SRegisterDefinition *userRegisters;
++ const ulong *configRegisters;
++ } CountryDescriptor;
++
++/*
++ * V.34 coding parameters structure
++ */
++
++typedef struct
++ {
++ /* DO NOT CHANGE THE ORDER OF FIELDS IN THIS STRUCTURE!
++ * (Some assembly code depends on it!) If you
++ * must add fields, please do so at the bottom.
++ */
++
++ int symbolRateIndex,
++ dataRateIndex,
++ userSNRAdjustment;
++ Boolean auxChannel,
++ expConstellation,
++ precoding,
++ nonlinearCoding;
++ schar J, /* number of data frames in superframe */
++ P, /* number of mapping frames in a data frame */
++ r, /* number of high mapping frames in a data frame */
++ b, /* number of data bits in a mapping frame */
++ W, /* number of aux bits in a data frame */
++ K, /* number of S bits in a mapping frame */
++ q, /* number of Q bits in a 2D symbol */
++ M; /* number of rings in shell mapping */
++ long nominalVariance; /* the signal variance which gives 1e-2 BLER Q10 */
++ int bitsPerDataFrame;
++ short quantRoundOff,
++ quantMask;
++ uchar nTrellisStates,
++ log2NTrellisStates;
++ short gain1xmt,
++ gain2xmt,
++ gain1rcv,
++ gain2rcv;
++ ushort bitInversionPattern;
++ } V34CodingParams;
++
++typedef long v8bisStatusCode;
++typedef bitMap v8bisConnectionSetup;
++#if defined(V8BIS) || defined(AT_COMMANDS_V8BIS)
++#include "V8bisMainTypes.h"
++#endif
++
++#define kMaxMultiTones 4 /* MultiTone: search for up to this many tones at once */
++
++#ifndef ADSL_MODEM
++typedef struct
++ {
++ modemStatusCode code;
++ union
++ {
++ long value;
++ long freq;
++ modemErrorCode error;
++ modulationMap modulation;
++ modulationMap modemSignal;
++ dataRateMap dataRate;
++ long dtmfSignal;
++ bitMap callProgressSignal;
++ bitMap customSignal;
++ void *ptr;
++ struct
++ {
++ long detected;
++ long numTones;
++ long tones[kMaxMultiTones];
++ } multiToneInfo;
++ struct
++ {
++ v8bisStatusCode code;
++ long value;
++ } v8bisStatus;
++ struct
++ {
++ trainingProgressCode code;
++ long value;
++ } trainingInfo;
++ struct
++ {
++ long code;
++ long value;
++ } v24Circuit;
++ struct
++ {
++ trainingProgressCode code;
++ void* ptr;
++ } advancedTrainingInfo;
++ struct
++ {
++ capabilitiesStatusCode code;
++ long value;
++ } capabilitiesStatusInfo;
++ struct
++ {
++ connectionInfoCode code;
++ long value;
++ } connectionInfo;
++ struct
++ {
++ connectionInfoCode code;
++ int length;
++ uchar *ptr;
++ } advancedConnectionInfo;
++ struct
++ {
++ dialerStatusCode code;
++ long value;
++ long makeTime;
++ long breakTime;
++ } dialerStatus;
++ struct
++ {
++ long enabled;
++ long volume;
++ } speakerStatus;
++ framingInfoCode framingInfo;
++ IOStatusCode ioStatus;
++ struct
++ {
++ lapmStatusCode code;
++ union
++ {
++ long value;
++ lapmTakedownReason reason;
++ lapmErrorCode error;
++ lapmTestResultCode testResult;
++ struct
++ {
++ long length;
++ uchar *framePtr;
++ } frame;
++ struct
++ {
++ long nFrames;
++ long nFrameErrors;
++ } statistic;
++ } param;
++ } lapmStatus;
++ struct
++ {
++ lapmParameterCode code;
++ long value;
++ } lapmParameter;
++ struct
++ {
++ v42bisStatusCode code;
++ union
++ {
++ long value;
++ v42bisErrorCode error;
++ struct
++ {
++ long nBytesIn;
++ long nBytesOut;
++ } statistic;
++ } param;
++ } v42bisStatus;
++ struct
++ {
++ mnpStatusCode code;
++ union
++ {
++ long value;
++ mnpTakedownReason reason;
++ mnpErrorCode error;
++ struct
++ {
++ long nFrames;
++ long nFrameErrors;
++ } statistic;
++ struct
++ {
++ ulong nSize;
++ uchar *Buffer;
++ } fallback;
++ struct
++ {
++ char *header;
++ void *frame;
++ } frame;
++ struct
++ {
++ long nack;
++ long rFrameNo;
++ } timeout;
++ struct
++ {
++ long frameNo;
++ long framesPending;
++ } retrFrame;
++ } param;
++ } mnpStatus;
++ struct
++ {
++ mnpParameterCode code;
++ long value;
++ } mnpParameter;
++ struct
++ {
++ v70StatusCode code;
++ union
++ {
++ long value;
++ v70TakedownReason reason;
++ v70ErrorCode error;
++ struct
++ {
++ long nFrames;
++ long nFrameErrors;
++ } statistic;
++ struct
++ {
++ long length;
++ uchar *framePtr;
++ } frame;
++ struct
++ {
++ long nack;
++ long rFrameNo;
++ } timeout;
++ struct
++ {
++ long frameNo;
++ long framesPending;
++ } retrFrame;
++ struct
++ {
++ long ChannelId;
++ long DLCI;
++ ulong LcNum;
++ v70TakedownReason reason;
++ } channelInfo;
++ struct
++ {
++ long ChannelId;
++ long stateOld;
++ long stateNew;
++ } stateInfo;
++ } param;
++ ulong v70Time;
++ } v70Status;
++ struct
++ {
++ audioStatusCode code;
++ union
++ {
++ long value;
++ struct
++ {
++ long nReq;
++ long nAvail;
++ } buffer;
++ struct
++ {
++ long nFrames;
++ long nFrameErrors;
++ } statistic;
++ struct
++ {
++ long length;
++ uchar *framePtr;
++ } frame;
++ } param;
++ } audioStatus;
++ struct
++ {
++ v80StatusCode code;
++ union
++ {
++ long value;
++ v80TakedownReason reason;
++ v80ErrorCode error;
++ struct
++ {
++ long nFrames;
++ long nFrameErrors;
++ } statistic;
++ struct
++ {
++ long length;
++ uchar *framePtr;
++ } frame;
++ struct
++ {
++ long code;
++ long value;
++ } inBand;
++ } param;
++ ulong v80Time;
++ } v80Status;
++ struct
++ {
++ v70ParameterCode code;
++ long value;
++ } v70Parameter;
++ struct
++ {
++ breakType type;
++ long length;
++ } breakStatus;
++ struct
++ {
++ callerIDStatusCode code;
++ union
++ {
++ long value;
++ struct
++ {
++ callerIDErrorCode code;
++ long value;
++ } callerIDError;
++ struct
++ {
++ long length;
++ char* ptr;
++ } message;
++ } param;
++ } callerIDStatus;
++ struct
++ {
++ ulong signal;
++ uchar *msg1;
++ long msg1Length;
++ uchar *msg2;
++ long msg2Length;
++ } A8RStatus;
++ struct
++ {
++ overlayStatusCode code;
++ long value;
++ long value2;
++ } overlayStatus;
++ struct
++ {
++ ulong nBits;
++ ulong nBlocks;
++ ulong nBitErrors;
++ ulong nBlockErrors;
++
++ ulong nAudioBits;
++ ulong nAudioBlocks;
++ ulong nAudioSyncErrors;
++ ulong nAudioBlockErrors;
++ } testResults;
++ ulong checksum;
++ struct
++ {
++ ulong sizeM;
++ uchar *filename;
++ } logFileControlStatus;
++ struct
++ {
++ long direction;
++ long module;
++ long message;
++ long data;
++ }
++ faxClass2Status;
++
++ } param;
++ } modemStatusStruct;
++
++typedef void (SM_DECL *statusHandlerType) (void *gDslVars, modemStatusStruct*);
++#endif /* ADSL_MODEM */
++
++/****************************************************************************/
++/* 1. Type definitions. */
++/* */
++/* 1.5 Command structure */
++/****************************************************************************/
++
++typedef struct
++ {
++ Boolean remoteModemIsFlex;
++ uchar countryCode;
++ ushort manufacturerId;
++ uchar licenseeId;
++ uchar productCapabilities;
++ Boolean digitalModeFlag;
++ Boolean prototypeFlag;
++ uchar version;
++ }
++FlexV8bisStruct;
++
++typedef struct
++ {
++ symbolRateMap symbolRates;
++ dataRateMap dataRates;
++ dataRateMap dataRates56k;
++ dataRateMap dataRatesFlex;
++ featureMap features;
++ bitMap auxFeatures;
++ bitMap demodCapabilities;
++ long rateThresholdAdjustment; /* dB Q4 */
++ FlexV8bisStruct flexRemoteV8bisInfo;
++ } dataPumpCapabilities;
++
++#ifndef ADSL_MODEM
++typedef struct SoftwareModemCommandParameters
++ {
++ modemCommandCode command;
++ union
++ {
++ long xmtGain;
++ ulong hybridDelayQ4ms;
++ long modemSampleRate;
++ long timeInMs;
++ long state;
++ long freq;
++ NVRAMConfiguration *nvramConfigurationPtr;
++ long enabled;
++ long value;
++ uchar *phoneNumber;
++ uchar *faxECMPageBufferPtr;
++ CountryDescriptor *countryDescriptorTable;
++ struct
++ {
++ dataRateMap dteRate;
++ bitMap format;
++ } dteRateSpec;
++ struct
++ {
++ v8ControlType code;
++ long value;
++ uchar *buffer;
++ } v8ControlSpec;
++ struct
++ {
++ directionType direction;
++ v8bisConnectionSetup setup;
++ void *capPtr;
++ voidFuncType confirmMsFunc;
++ voidFuncType genMsFunc;
++ xmtHandlerWithRtnValType ogmFunc;
++ } v8bisSpec;
++ struct
++ {
++ directionType direction;
++ } ADSISpec;
++ struct
++ {
++ directionType direction;
++ modulationMap modulations;
++ dataPumpCapabilities capabilities;
++ } modeSpec;
++ struct
++ {
++ long time,
++ freq1,
++ freq2,
++ freq3,
++ freq4,
++ mag1,
++ mag2,
++ mag3,
++ mag4;
++ } toneSpec;
++ struct
++ {
++ long signal;
++ uchar *msg1;
++ long msg1Length;
++ uchar *msg2;
++ long msg2Length;
++ long sig_en;
++ long msg_en;
++ long supp_delay;
++ }
++ v8bisMessageSpec;
++ struct
++ {
++ linkLayerType type;
++ bitMap setup;
++ dataRateMap rxDataRate;
++ dataRateMap txDataRate;
++ long rtDelayQ4ms;
++ rxDataHandlerType rxDataHandlerPtr;
++ txDataHandlerType txDataHandlerPtr;
++ } linkLayerSpec;
++ struct
++ {
++ framerType type;
++ bitMap setup;
++ directionType direction;
++ long fill[2]; /* need to match linkLayerSpec */
++ rxDataHandlerType rxDataHandlerPtr;
++ txDataHandlerType txDataHandlerPtr;
++ } framerSpec;
++ struct
++ {
++ framerParameterCode code;
++ long value;
++ } framerParameterSpec;
++ struct
++ {
++ bitMap callProgressDetectorSetup;
++ signalDetectorType callProgressDetectorPtr; /* if nil, use defaults */
++ signalDetectorType customDetectorPtr; /* if nil, no custom detector */
++ } callProgressMonitorSpec;
++ struct
++ {
++ ulong maxTones; /* maximum number of simultaneous tones to detect */
++ ulong allowableVariance; /* maximum cumulative variance in the eight interpolated frequencies */
++ ulong totalPowerThreshold; /* ignore complete block if power less than this */
++ ulong powerShiftThreshold; /* ignore a bin if its power is less than (totalPowerValue >> powerShiftThreshold) */
++ ulong toneMatchThresholdHz; /* tones within +/- this many Hz of original tone are considered the same tone */
++ ulong binSeparation; /* ignore tones with a spacing of less than this */
++ ulong outsideFreqDeviation; /* an individual value in the interpolated array can be up to this many Hz outside of the expected angle range */
++ } multiToneSpec;
++ struct
++ {
++ uchar *dialString; /* nil limited string for DTMF dialing sequence */
++ long pulseBreakTime,
++ pulseMakeTime,
++ pulseInterDigitTime,
++ toneDigitTime,
++ toneInterDigitTime,
++ toneLoGroupMag,
++ toneHiGroupMag,
++ flashTime,
++ pauseTime,
++ signalWaitTimeout,
++ blindDialingTimeout;
++ bitMap dialerSetup;
++ bitMap callProgressDetectorSetup;
++ signalDetectorType callProgressDetectorPtr; /* if nil, use defaults */
++ signalDetectorType customDetectorPtr; /* if nil, no custom detector */
++ hookHandlerType hookHandlerPtr; /* nil if DTMF dialing specified*/
++ } dialSpec;
++ struct
++ {
++ long timeOn,
++ timeOff,
++ freq;
++ } callingToneSpec;
++ union
++ {
++ statusHandlerType statusHandlerPtr;
++ eyeHandlerType eyeHandlerPtr;
++ logHandlerType logHandlerPtr;
++ rxDataHandlerType rxDataHandlerPtr;
++ txDataHandlerType txDataHandlerPtr;
++ } handlerSpec;
++ struct
++ {
++ breakType type;
++ long length;
++ } breakSpec;
++ struct
++ {
++ long length;
++ uchar *dataPtr;
++ } lapmTestSpec;
++ struct
++ {
++ bitMap setupLapm;
++ rxDataHandlerType rxAudioHandlerPtr;
++ txDataHandlerType txAudioHandlerPtr;
++ } v70SetupSpec;
++ struct
++ {
++ ulong ChannelId;
++ ulong LogChannelNum;
++ ulong PortNum;
++ } EstChannelSpec;
++ struct
++ {
++ ulong ChannelId;
++ } WaitChannelSpec;
++ struct
++ {
++ ulong ChannelId;
++ ulong LogChannelNum;
++ ulong PortNum;
++ ulong DLCI;
++ } RelChannelSpec;
++ struct
++ {
++ audioType type;
++ bitMap setup;
++ dataRateMap rxAudioRate;
++ dataRateMap txAudioRate;
++ rxAudioHandlerType rxAudioHandlerPtr;
++ txAudioHandlerType txAudioHandlerPtr;
++ } audioSpec;
++ struct
++ {
++ long code;
++ long value;
++ } v24Circuit;
++ struct
++ {
++ ulong code;
++ ulong value;
++ ulong minValue;
++ ulong maxValue;
++ } atRegister;
++ struct
++ {
++ long code;
++ uchar *response;
++ } atiSpec;
++ struct
++ {
++ long length;
++ uchar *framePtr;
++ } frameSpec;
++ struct
++ {
++ long code;
++ union
++ {
++ long value;
++ struct
++ {
++ long loFreq1;
++ long hiFreq1;
++ long loFreq2;
++ long hiFreq2;
++ } freqRange;
++ } params;
++ } callProgressParamSpec;
++ struct
++ {
++ v250IdStringCode v250IdCode;
++ uchar *v250IdString;
++ } v250IdSpec;
++
++ } param;
++ } modemCommandStruct;
++
++typedef Boolean (*commandHandlerType) (modemCommandStruct*);
++#endif /* ADSL_MODEM */
++
++
++
++/****************************************************************************/
++/* 2. Constant definitions. */
++/* */
++/* 2.1 Definitive constants */
++/****************************************************************************/
++
++#define kMaxSampleBlockSize 48
++#define kMaxDataBlockSize 48
++
++#define kMaxDialStringLength 127
++#define kCallProgressSampleRate 7200
++
++#define kMaxCallerIDMessageLength 80
++
++/****************************************************************************/
++/* 2. Constant definitions. */
++/* */
++/* 2.2 Bit maps */
++/****************************************************************************/
++
++/* modulationMap */
++
++#define kIdle 0x00000000
++#define kV25 0x00000001
++#define kV8 0x00000002
++#define kCid 0x00000004
++#define kV8bis 0x00000008
++#define kV21 0x00000010
++#define kV22 0x00000020
++#define kV23 0x00000040
++#define kV32 0x00000080
++#define kV34 0x00000100
++#define kX2 0x00000200
++#define kV90 0x00000400
++#define k56Flex 0x00000800
++#define kV27 0x00001000
++#define kV29 0x00002000
++#define kV17 0x00004000
++#define kV34HDX 0x00008000
++#define kV34HDXC 0x00010000
++#define kBell103 0x00100000
++#define kBell212 0x00200000
++#define kDataCallingTone 0x01000000
++#define kFaxCallingTone 0x02000000
++
++#define kV22FastNZConnect 0x04000000
++#define kV22FastNNZConnect 0x08000000
++#define kV22FastConnect (kV22FastNZConnect|kV22FastNNZConnect)
++#define kV22bisFastConnect 0x10000000
++
++
++#define kDataModulations (kV25 | kV8 | kV21 | kV22FastConnect | kV22bisFastConnect | kV22 | kV23 | kV32 | kV34 | kBell103 | kBell212)
++#define kDataOnlyModulations (kV21 | kV22 | kV23 | kV32 | kBell103 | kBell212)
++#define kPCMModulations (kV90 | kX2 | k56Flex)
++
++#define kFaxModulations (kV25 | kV21 | kV27 | kV29 | kV17)
++#define kFaxOnlyModulations (kV27 | kV29 | kV17)
++#define kFaxModulationShift 12
++
++/* symbolRateMap */
++
++#define k1200Hz 0x00000001
++#define k1600Hz 0x00000002
++#define k2400Hz 0x00000004
++#define k2743Hz 0x00000008
++#define k2800Hz 0x00000010
++#define k3000Hz 0x00000020
++#define k3200Hz 0x00000040
++#define k3429Hz 0x00000080
++#define k8000Hz 0x00000100
++
++#define kAllSymbolRates ( k1200Hz | k1600Hz | k2400Hz | k2743Hz | \
++ k2800Hz | k3000Hz | k3429Hz | k8000Hz )
++
++/* dataRateMap */
++
++#define k75bps 0x00000002
++#define k300bps 0x00000004
++#define k600bps 0x00000008
++#define k1200bps 0x00000010
++#define k2400bps 0x00000020
++#define k4800bps 0x00000040
++#define k7200bps 0x00000080
++#define k9600bps 0x00000100
++#define k12000bps 0x00000200
++#define k14400bps 0x00000400
++#define k16800bps 0x00000800
++#define k19200bps 0x00001000
++#define k21600bps 0x00002000
++#define k24000bps 0x00004000
++#define k26400bps 0x00008000
++#define k28800bps 0x00010000
++#define k31200bps 0x00020000
++#define k33600bps 0x00040000
++#define k36000bps 0x00080000
++#define k38400bps 0x00100000
++#define k57600bps 0x00200000
++#define k115200bps 0x00400000
++#define k230400bps 0x00800000
++#define k460800bps 0x01000000
++#define k921600bps 0x02000000
++/*
++ * kPCMRate is used to identify that the reported rate is
++ * PCM modulation rate, and is only used for PCM modulation while
++ * reporting rate !!!!
++ */
++#define kPCMRate 0x40000000
++#define kPCMFlexRate 0x80000000
++#define kAllDataRates 0x0FFFFFFF
++
++/* rates specific for X2 and V.90 */
++#define kPCM25333bps 0x00000001
++#define kPCM26666bps 0x00000002
++#define kPCM28000bps 0x00000004
++#define kPCM29333bps 0x00000008
++#define kPCM30666bps 0x00000010
++#define kPCM32000bps 0x00000020
++#define kPCM33333bps 0x00000040
++#define kPCM34666bps 0x00000080
++#define kPCM36000bps 0x00000100
++#define kPCM37333bps 0x00000200
++#define kPCM38666bps 0x00000400
++#define kPCM40000bps 0x00000800
++#define kPCM41333bps 0x00001000
++#define kPCM42666bps 0x00002000
++#define kPCM44000bps 0x00004000
++#define kPCM45333bps 0x00008000
++#define kPCM46666bps 0x00010000
++#define kPCM48000bps 0x00020000
++#define kPCM49333bps 0x00040000
++#define kPCM50666bps 0x00080000
++#define kPCM52000bps 0x00100000
++#define kPCM53333bps 0x00200000
++#define kPCM54666bps 0x00400000
++#define kPCM56000bps 0x00800000
++#define kPCM57333bps 0x01000000
++
++#define kV90ServerToClientDataRates \
++ ( kPCM28000bps | kPCM29333bps | kPCM30666bps | \
++ kPCM32000bps | kPCM33333bps | kPCM34666bps | \
++ kPCM36000bps | kPCM37333bps | kPCM38666bps | \
++ kPCM40000bps | kPCM41333bps | kPCM42666bps | \
++ kPCM44000bps | kPCM45333bps | kPCM46666bps | \
++ kPCM48000bps | kPCM49333bps | kPCM50666bps | \
++ kPCM52000bps | kPCM53333bps | kPCM54666bps | \
++ kPCM56000bps | kPCM57333bps )
++
++#define kV90ClientToServerDataRates \
++ ( k4800bps | k7200bps | k9600bps | k12000bps | \
++ k14400bps | k16800bps | k19200bps | k21600bps | \
++ k24000bps | k26400bps | k28800bps | k31200bps | \
++ k33600bps )
++
++
++
++#define kX2ServerToClientDataRates \
++ ( kPCM25333bps | kPCM26666bps | kPCM28000bps | \
++ kPCM29333bps | kPCM30666bps | kPCM32000bps | \
++ kPCM33333bps | \
++ kPCM34666bps | kPCM36000bps | kPCM37333bps | \
++ kPCM38666bps | kPCM40000bps | kPCM41333bps | \
++ kPCM42666bps | kPCM44000bps | kPCM45333bps | \
++ kPCM46666bps | kPCM48000bps | kPCM49333bps | \
++ kPCM50666bps | kPCM52000bps | kPCM53333bps | \
++ kPCM54666bps | kPCM56000bps | kPCM57333bps )
++#define kX2ClientToServerDataRates \
++ ( k4800bps | k7200bps | k9600bps | k12000bps | k14400bps | \
++ k16800bps | k19200bps | k21600bps | k24000bps | k26400bps | k28800bps | \
++ k31200bps )
++
++ /*
++ Rates specific for Flex
++ */
++#define kPCMFlex32000bps 0x00000001
++#define kPCMFlex34000bps 0x00000002
++#define kPCMFlex36000bps 0x00000004
++#define kPCMFlex38000bps 0x00000008
++#define kPCMFlex40000bps 0x00000010
++#define kPCMFlex42000bps 0x00000020
++#define kPCMFlex44000bps 0x00000040
++#define kPCMFlex46000bps 0x00000080
++#define kPCMFlex48000bps 0x00000100
++#define kPCMFlex50000bps 0x00000200
++#define kPCMFlex52000bps 0x00000400
++#define kPCMFlex54000bps 0x00000800
++#define kPCMFlex56000bps 0x00001000
++#define kPCMFlex58000bps 0x00002000
++#define kPCMFlex60000bps 0x00004000
++
++#define kFlexServerToClientDataRates \
++ ( kPCMFlex32000bps | kPCMFlex34000bps | kPCMFlex36000bps | kPCMFlex38000bps | \
++ kPCMFlex40000bps | kPCMFlex42000bps | kPCMFlex44000bps | kPCMFlex46000bps | \
++ kPCMFlex48000bps | kPCMFlex50000bps | kPCMFlex52000bps | kPCMFlex52000bps | \
++ kPCMFlex54000bps | kPCMFlex56000bps | kPCMFlex58000bps | kPCMFlex60000bps )
++
++#define kFlexClientToServerDataRates \
++ ( k4800bps | k7200bps | k9600bps | k12000bps | \
++ k14400bps | k16800bps | k19200bps | k21600bps | \
++ k24000bps | k26400bps | k28800bps | k31200bps )
++
++
++#define k2400BitShift 5
++#define k4800BitShift 6
++
++#define kPCM28000bpsShift 2
++
++#define kV21Rates k300bps
++#define kV22Rates k1200bps
++#define kV22bisRates (k1200bps | k2400bps)
++#define kV23Rates (k75bps | k1200bps)
++#define kCidRates (k1200bps)
++#define kV32Rates (k4800bps | k9600bps)
++#define kV32bisRates (kV32Rates | k7200bps | k12000bps | k14400bps)
++#define kV32terboRates (kV32bisRates | k16800bps | k19200bps)
++#define kV34Rates ( k2400bps | k4800bps | k7200bps | k9600bps | k12000bps | k14400bps | \
++ k16800bps | k19200bps | k21600bps | k24000bps | k26400bps | k28800bps | \
++ k31200bps | k33600bps )
++
++#define kV27Rates (k2400bps | k4800bps)
++#define kV29Rates (k4800bps | k7200bps | k9600bps)
++#define kBell103Rates k300bps
++#define kBell212Rates k1200bps
++
++
++/* Demodulator capabilities */
++#define kNeecEnabled 0x00000001
++#define kPFeecEnabled 0x00000002
++#define kIeecEnabled 0x00000004
++#define kFeecEnabled 0x00000008
++
++#define kRapidEqualizerTraining 0x00000010
++#define kRapidPECTraining 0x00000020
++#define kRapidECTraining 0x00000040
++#define kAutoLoadReductionEnabled 0x00000080
++
++#define kTimingTrackingEnabled 0x00000100
++#define kPhaseLockedLoopEnabled 0x00000200
++#define kFeecPhaseLockedLoopEnabled 0x00000400
++#define kPhaseJitterTrackingEnabled 0x00000800
++
++#define kClockErrorTrackingEnabled 0x00001000
++#define kFreqOffsetTrackingEnabled 0x00002000
++#define kFeecFreqOffsetTrackingEnabled 0x00004000
++
++#define kShorterNeecEnabled 0x00008000
++#define kShorterPFeecEnabled 0x00010000
++#define kFrondEndHPFilterEnabled 0x00020000
++#define kGainControlEnabled 0x00040000
++#define kPhaseHitControlEnabled 0x00080000
++#define kBandEdgeCorrectorEnabled 0x00100000
++#define kDisableFaxFastClearDown 0x00200000
++
++#define kImdOffsetCompensationEnabled 0x00400000
++
++#define kV34ShortEqlLengthExtShift 23
++#define kV34ShortEqlLengthExtMask (0x3<<kV34ShortEqlLengthExtShift)
++#define kV34EqlLengthReductionEnabled (1<<(kV34ShortEqlLengthExtShift+2))
++#define kPCMIeecLengthReductionEnabled (1<<(kV34ShortEqlLengthExtShift+3))
++
++/* featureMap */
++
++#define kAllFeatures 0xFFFFFFFF
++
++#define kAutomodingEnabled 0x00000001 /* bit 1 */
++#define kAutomodingDisabled 0x00000000 /* bit 1 */
++
++#define kV8SendCIEnabled 0x00000002 /* bit 2 */
++#define kV8SendCIDisabled 0x00000000 /* bit 2 */
++
++#define kV34CMEModem 0x00000004 /* bit 3 */
++#define kV34NotCMEModem 0x00000000 /* bit 3 */
++
++#define kV34ExtraINFOPreamble 0x00000008 /* bit 4 */
++
++#define kRetrainingEnabled 0x00000010
++#define kRateRenegotiationEnabled 0x00000020
++#define kTrellisCodingEnabled 0x00000040
++
++/* Fax specific features */
++#define kFaxShortTraining 0x00000080
++#define kFaxEchoSuppressionEnabled 0x00000100
++
++/* V.22/V.22bis specific features */
++#define kV22GuardTone1800HzEnabled 0x00000200
++#define kV22GuardTone550HzEnabled 0x00000400
++
++
++/* V.34 specific features */
++
++#define kV34bisEnabled 0x00000800
++
++#define kV34PowerReductionAllowed 0x00001000
++#define kAuxChannelEnabled 0x00002000
++#define kAuxChannelDisabled 0x00000000
++#define kV34TrellisEncoderTypeMask 0x0000C000
++#define kV34TrellisEncoderTypeShift 14
++
++#define kTRN16 0x00010000
++#define kAssymDataRatesEnabled 0x00020000
++#define kNonLinearCodingEnabled 0x00040000
++#define kConstShapingEnabled 0x00080000
++#define kPrecodingEnabled 0x00100000
++
++#define kV34LoFcAt2400HzEnabled 0x00200000
++#define kV34HiFcAt2400HzEnabled 0x00400000
++#define kV34LoFcAt2743HzEnabled 0x00800000
++#define kV34HiFcAt2743HzEnabled 0x01000000
++#define kV34LoFcAt2800HzEnabled 0x02000000
++#define kV34HiFcAt2800HzEnabled 0x04000000
++#define kV34LoFcAt3000HzEnabled 0x08000000
++#define kV34HiFcAt3000HzEnabled 0x10000000
++#define kV34LoFcAt3200HzEnabled 0x20000000
++#define kV34HiFcAt3200HzEnabled 0x40000000
++#define kV34LoFcAt3429HzEnabled 0x80000000
++#define kV34HiFcAt3429HzEnabled 0x80000000
++
++/* auxiliary features definintions map */
++
++#define kLoopbackTestFinish 0x00000000
++#define kLoopbackTestV54Loop1 0x00000001
++#define kLoopbackTestV54Loop2 0x00000002
++#define kLoopbackTestV54Loop3 0x00000003
++#define kLoopbackTestTypeMask 0x00000003
++#define kLoopbackTestAutoRespondEnabled 0x00000004
++#define kLoopbackSelfTest 0x00000008
++
++#define kPreempFilterMask 0x000000F0
++#define kPreempFilterShift 4
++
++#define kPcmCodingTypeMuLaw 0x00000100
++#define kPcmServerToServerEnabled 0x00000200
++#define kPcmIsServerModem 0x00000400
++#define kPcmAnalogModemAvailable 0x00000800
++#define kPcmDigitalModemAvailable 0x00001000
++#define kPcmDceOnDigitalNetwork 0x00002000
++#define kPcmDModemPwrCalAtCodecOut 0x00004000
++#define kPcm3429UpstreamAvailable 0x00008000
++
++#define kPcmSpectralShapingBitsMask 0x00070000
++#define kPcmSpectralShapingBitsShift 16
++#define kV90ServerNotDetSbarAfterJdbarFix 0x00080000
++
++#define kAutomoderPassive 0x00400000
++
++#define kV8HoldANSamUntilDetCI 0x00800000
++#define kFaxSendFromOrgSide 0x01000000
++#define kFaxV34HDX2400bpsCtrlChan 0x02000000
++#define kFaxV34HDXAllowAsymCtrlChan 0x04000000
++#define kV8ANSamStageDisabled 0x08000000
++
++#define kFlexSkipV8bis 0x10000000
++#define kV34ControlChannelEnabled 0x20000000
++#define kV34SeamlessRateChangeEnabled 0x40000000
++
++#define kPTTTest 0x80000000
++
++/* call progress detection Map */
++
++#define kDialTone 0x00000001
++#define kRingBack 0x00000002
++#define kBusy 0x00000004
++#define kReorder 0x00000008
++#define k2ndDTn 0x00000010
++#define kBongTone 0x00000020
++
++/* Break type bit settings */
++#define kExpedited 0x0001
++#define kDestructive 0x0002
++
++/* async Framer setup map */
++
++#define kNDataBitsMask 0x03
++#define k5DataBits 0x00
++#define k6DataBits 0x01
++#define k7DataBits 0x02
++#define k8DataBits 0x03
++
++#define kNDataBitsShift 0
++#define kNDataBitsOffset 5
++
++#define kParityTypeMask 0x1C
++#define kNoParity 0x00
++#define kOddParity 0x04
++#define kEvenParity 0x08
++#define kMarkParity 0x0C
++#define kSpaceParity 0x10
++
++#define kNStopBitsMask 0x60
++#define k1StopBits 0x00
++#define k2StopBits 0x20
++
++#define kNStopBitsShift 5
++#define kNStopBitsOffset 1
++
++/* Sync Framer setup map */
++
++#define kUnderrunCharMask 0xff
++#define kRepeatLastCharOnUnderrun 0x100
++
++/* HDLC sync framer setup maps */
++#define kNFlagsBeforeFramesMask 0x3F
++#define kNFlagsBeforeFramesShift 0
++
++#define kNFlagsBetweenFramesMask 0x3F
++#define kNFlagsBetweenFramesShift 6
++
++#define k32BitCRC 0x1000
++#define kFlagSharingEnabled 0x2000
++
++#define kNFlagsBeforeReportMask 0x03 /* no. of *extra* flags reqd before frame */
++#define kNFlagsBeforeReportShift 14
++
++#define kTxDeferredCRC 0x10000
++#define kRxDeferredCRC 0x20000
++#define kTxIdleMarks 0x40000
++#define kNoCRC 0x80000
++
++/* SAM framer setup maps */
++
++#define kSAMTransparentIdleTypeMask 0x00000003
++#define kSAMTransparentIdleTypeShift 0
++#define kSAMFramedIdleTypeMask 0x00000004
++#define kSAMFramedIdleTypeShift 2
++#define kSAMFramedOverrunActionMask 0x00000010
++#define kSAMFramedOverrunActionShift 4
++#define kSAMHalfDuplexModeMask 0x00000020
++#define kSAMHalfDuplexModeShift 5
++#define kSAMCRCTypeMask 0x000000C0
++#define kSAMCRCTypeShift 6
++#define kSAMNRZIEnabledMask 0x00000100
++#define kSAMNRZIEnabledShift 8
++#define kSAMSyn1Mask 0x00FF0000
++#define kSAMSyn1Shift 16
++#define kSAMSyn2Mask 0xFF000000
++#define kSAMSyn2Shift 24
++
++/* <trans_idle> */
++#define kSAM8bitSYNHuntDisabled 0
++#define kSAM8bitSYNHuntEnabled ((ulong)1 << kSAMTransparentIdleTypeShift)
++#define kSAM16bitSYNHuntEnabled ((ulong)2 << kSAMTransparentIdleTypeShift)
++
++/* <framed_idle> */
++#define kSAMSendFlagsOnIdle 0
++#define kSAMSendMarksOnIdle ((ulong)1 << kSAMFramedIdleTypeShift)
++
++/* <framed_un_ov> */
++#define kSAMAbortOnUnderrun 0
++#define kSAMFlagsOnUnderrun ((ulong)1 << kSAMFramedOverrunActionShift)
++
++/* <hd_auto> */
++#define kSAMHalfDuplexNoAuto 0
++#define kSAMHalfDuplexAuto ((ulong)1 << kSAMHalfDuplexModeShift)
++
++
++/* <crc_type> */
++#define kSAMNoCRC 0
++#define kSAM16bitCRC ((ulong)1 << kSAMCRCTypeShift)
++#define kSAM32bitCRC ((ulong)2 << kSAMCRCTypeShift)
++
++/* <nrzi_en> */
++#define kSAMNRZIDisabled 0
++#define kSAMNRZIEnabled ((ulong)1 << kSAMNRZIEnabledShift)
++
++
++/* LAPM setup maps */
++#define kLapmDirection 0x00000001 /* Bit 0 */
++#define kLapmSREJEnabled 0x00000002 /* Bit 1 */
++#define kLapmDetectionEnabled 0x00000004 /* Bit 2 */
++#define kLapmLongADPEnabled 0x00000008 /* Bit 3 */
++
++#define kLapmCompressionEnabledMask 0x00000030
++#define kLapmTxCompressionEnabled 0x00000010 /* Bit 4 */
++#define kLapmRxCompressionEnabled 0x00000020 /* Bit 5 */
++#define kLapmCompressionEnabledShift 4
++
++#define kLapmRetryLimitMask 0x000000C0 /* Bits 6,7 */
++
++#define kLapmNoRetryLimit 0x00000000
++#define kLapm4Retries 0x00000040
++#define kLapm8Retries 0x00000080
++#define kLapm20Retries 0x000000C0
++
++#define kLapmWindowSizeMask 0x00001F00 /* Bits 8-12 */
++#define kLapmWindowSizeShift 8
++
++#define kLapmWindowSize8 0x00000800
++#define kLapmWindowSize15 0x00000F00
++
++
++#define kLapmInfoFieldSizeMask 0x0000E000 /* Bits 13-15 */
++#define kLapmInfoField8Bytes 0x00000000
++#define kLapmInfoField16Bytes 0x00002000
++#define kLapmInfoField32Bytes 0x00004000
++#define kLapmInfoField64Bytes 0x00006000
++#define kLapmInfoField128Bytes 0x00008000
++#define kLapmInfoField192Bytes 0x0000A000
++#define kLapmInfoField256Bytes 0x0000C000
++#define kLapmInfoField512Bytes 0x0000E000
++#define kLapmInfoFieldSizeShift 13
++
++#define kLapmT400Mask 0x00030000 /* Bits 16-17 */
++#define kLapmAutoT400 0x00000000
++#define kLapm750msT400 0x00010000
++#define kLapm3secT400 0x00020000
++#define kLapm30secT400 0x00030000
++
++#define kLapmT401Mask 0x000C0000 /* Bits 18-19 */
++#define kLapmAutoT401 0x00000000
++#define kLapm750msT401 0x00040000
++#define kLapm3secT401 0x00080000
++#define kLapm6secT401 0x000C0000
++
++#define kLapmT403Mask 0x00300000 /* Bits 20-21 */
++#define kLapmAutoT403 0x00000000
++#define kLapm750msT403 0x00100000
++#define kLapm2secT403 0x00200000
++#define kLapm4secT403 0x00300000
++
++
++
++#define kLapmDictSizeMask 0x00C00000 /* Bits 22-23 */
++#define kLapmDictSize512 0x00000000
++#define kLapmDictSize1024 0x00400000
++#define kLapmDictSize2048 0x00800000
++#define kLapmDictSize4096 0x00C00000
++
++#define kLapmStringSizeMask 0xFF000000 /* Bits 24-31 */
++#define kLapmStringSizeShift 24
++
++/* MNP setup maps */
++
++#define kMnpMinPLevel 0x00000001 /* Bit 0: 1 - Minimal, 0 - Standard */
++#define kMnpStdPLevel 0x00000000 /* Bit 0: 1 - Minimal, 0 - Standard */
++
++#define kMnpOptimizationEnabled 0x00000002 /* Bit 1 */
++#define kMnpOptimizationDisabled 0x00000000 /* Bit 1 */
++
++#define kMnpCompressionEnabled 0x00000004 /* Bit 2 */
++#define kMnpCompressionDisabled 0x00000000 /* Bit 2 */
++
++#define kMnpClassMask 0x00000018
++#define kMnpClassShift 3
++#define kMnpClass1 0x00000008
++#define kMnpClass2 0x00000010
++#define kMnpClass3 0x00000018 /* Bits 3,4 */
++
++#define kMnpMaxRetryMask 0x00000060 /* Bits 5,6 */
++#define kMnpMaxRetryShift 5
++#define kMnpNoRetryLimit 0x00000000
++#define kMnp4Retries 0x00000020
++#define kMnp8Retries 0x00000040
++#define kMnp20Retries 0x00000060
++
++#define kMnpInfoFieldSizeMask 0x00000380 /* Bits 7-9 */
++#define kMnpInfoFieldSizeShift 7
++#define kMnpInfoField8Bytes 0x00000000
++#define kMnpInfoField16Bytes 0x00000080
++#define kMnpInfoField32Bytes 0x00000100
++#define kMnpInfoField64Bytes 0x00000180
++#define kMnpInfoField128Bytes 0x00000200
++#define kMnpInfoField192Bytes 0x00000280
++#define kMnpInfoField256Bytes 0x00000300
++#define kMnpInfoField260Bytes 0x00000380
++
++#define kMnpT400Mask 0x00003000 /* Bits 12,13 */
++#define kMnpT400Shift 12
++#define kMnpAutoT400 0x00000000
++#define kMnp750msT400 0x00001000
++#define kMnp3secT400 0x00002000
++#define kMnp6secT400 0x00003000
++
++#define kMnpT401Mask 0x0000C000 /* Bits 14,15 */
++#define kMnpT401Shift 14
++#define kMnpAutoT401 0x00000000
++#define kMnp750msT401 0x00004000
++#define kMnp3secT401 0x00008000
++#define kMnp6secT401 0x0000C000
++
++#define kMnpT403Mask 0x00030000 /* Bits 16,17 */
++#define kMnpT403Shift 16
++#define kMnpAutoT403 0x00000000
++#define kMnp60secT403 0x00010000
++#define kMnp600secT403 0x00020000
++#define kMnp3600secT403 0x00030000
++
++#define kMnpFallbackTypeMask 0x000C0000 /* Bits 18,19 */
++#define kMnpFallbackTypeShift 18
++#define kMnpNoFallback 0x00000000
++#define kMnpFallbackTime 0x00040000
++#define kMnpFallback200 0x00080000
++#define kMnpFallbackChar 0x000C0000
++
++#define kMnpWindowSizeMask 0x00300000 /* Bits 20,21 */
++#define kMnpWindowSizeShift 20
++#define kMnp1Frame 0x00000000
++#define kMnp4Frames 0x00100000
++#define kMnp8Frames 0x00200000
++#define kMnp16Frames 0x00300000
++
++#define kMnpDirection 0x00800000 /* Bit 22 */
++
++#define kMnpFallbackCharMask 0xFF000000 /* Bit 24-31 */
++#define kMnpFallbackCharShift 24
++
++/* kV34HDXTurnOffCurrentModeCmd state parameter values */
++
++#define kV34HDXTurnOffAsClearDown 0
++#define kV34HDXTurnOffFromControlSource 1
++#define kV34HDXTurnOffFromControlDestination 2
++#define kV34HDXTurnOffFromPrimarySource 3
++#define kV34HDXTurnOffFromPrimaryDestination 4
++
++/* V70 setup maps */
++
++#define kV70Direction 0x00000001 /* Bit 0 */
++#define kV70uIHEnabled 0x00000002 /* Bit 1 */
++#define kV70AudioHeaderEnabled 0x00000004 /* Bit 2 */
++#define kV70SilenceSupprEnabled 0x00000008 /* Bit 3 */
++
++#define kV70SuspendResumeShift 4
++#define kV70SuspendResumeMask (3 << kV70SuspendResumeShift)
++#define kV70SuspendResumeDisabled 0x00000000 /* Bit 4,5 */
++#define kV70SuspendResumeWAddr 0x00000010 /* Bit 4 */
++#define kV70SuspendResumeWoAddr 0x00000020 /* Bit 5 */
++
++#define kV70CrcLengthShift 6
++#define kV70CrcLengthMask (3 << kV70CrcLengthShift)
++#define kV70CrcLength16 0x00000000 /* Bit 6,7 */
++#define kV70CrcLength8 0x00000040 /* Bit 6 */
++#define kV70CrcLength32 0x00000080 /* Bit 7 */
++
++#define kV70BlockingFactorShift 8
++#define kV70BlockingFactorMask (3 << kV70BlockingFactorShift)
++#define kV70BlockingFactor1 0x00000000 /* Bit 8,9 */
++#define kV70BlockingFactor2 0x00000100 /* Bit 8 */
++#define kV70BlockingFactor3 0x00000200 /* Bit 9 */
++#define kV70BlockingFactor4 0x00000300 /* Bit 8,9 */
++
++#define kV70InitChannelsShift 10
++#define kV70InitChannelsMask (1 << kV70InitChannelsShift)
++#define kV70InitNoChannels 0x00000000 /* Bit 10,11 */
++#define kV70InitDataChannel 0x00000400 /* Bit 10,11 */
++#define kV70InitAudioChannel 0x00000800 /* Bit 10,11 */
++#define kV70InitBothChannels 0x00000C00 /* Bit 10,11 */
++
++#define kV70OOBEnabled 0x00001000 /* Bit 12 */
++
++/* V80 setup maps */
++
++#define kV80Direction 0x00000001 /* Bit 0 */
++
++#define kV80ModeShift 1
++#define kV80ModeMask (3 << kV80ModeShift)
++#define kV80SyncMode (0 << kV80ModeShift)
++#define kV80TunnellingMode (1 << kV80ModeShift)
++#define kV80SamMode (2 << kV80ModeShift)
++#define kV80SamTransparentMode (2 << kV80ModeShift)
++#define kV80SamFramedMode (3 << kV80ModeShift)
++
++#define kV80TransIdleShift 3
++#define kV80TransIdleMask (3 << kV80TransIdleShift)
++#define kV80TransIdleNoHunt (0 << kV80TransIdleShift)
++#define kV80TransIdleHunt8 (1 << kV80TransIdleShift)
++#define kV80TransIdleHunt16 (2 << kV80TransIdleShift)
++
++#define kV80FrameIdleShift 5
++#define kV80FrameIdleMask (1 << kV80FrameIdleShift)
++#define kV80FrameIdleFlags (0 << kV80FrameIdleShift)
++#define kV80FrameIdleMarks (1 << kV80FrameIdleShift)
++
++#define kV80FrameUnOvShift 6
++#define kV80FrameUnOvMask (1 << kV80FrameUnOvShift)
++#define kV80FrameUnOvAbort (0 << kV80FrameUnOvShift)
++#define kV80FrameUnOvFlag (1 << kV80FrameUnOvShift)
++
++#define kV80HdAutoShift 7
++#define kV80HdAutoMask (1 << kV80HdAutoShift)
++#define kV80HdAutoNormal (0 << kV80HdAutoShift)
++#define kV80HdAutoExtended (1 << kV80HdAutoShift)
++
++#define kV80CrcTypeShift 8
++#define kV80CrcTypeMask (3 << kV80CrcTypeShift)
++#define kV80NoCrc (0 << kV80CrcTypeShift)
++#define kV80Crc16 (1 << kV80CrcTypeShift)
++#define kV80Crc32 (2 << kV80CrcTypeShift)
++
++#define kV80NrziShift 10
++#define kV80NrziMask (1 << kV80NrziShift)
++#define kV80NrziDisabled (0 << kV80NrziShift)
++#define kV80NrziEnabled (1 << kV80NrziShift)
++
++#define kV80Syn1Mask 0x00FF0000 /* Bit 16-23 */
++#define kV80Syn1Shift 16
++#define kV80Syn2Mask 0xFF000000 /* Bit 24-31 */
++#define kV80Syn2Shift 24
++
++/* kStartCallProgressMonitorCmd setup masks */
++
++#define kDTMFDetectorDebouncerEnabled 0x0001
++#define kModemSignalDetectorDebouncerEnabled 0x0002
++#define kCallProgressDetectorDebouncerEnabled 0x0004
++#define kCustomSignalDebouncerEnabled 0x0008
++#define kFaxCallingToneSuppressionEnabled 0x0010
++#define kDataCallingToneSuppressionEnabled 0x0020
++#define kCISuppressionEnabled 0x0040
++#define kAnsSuppressionEnabled 0x0080
++
++/* kDialCmd setup masks (dialerSetup bit fields) */
++
++#define kDTMFDialingEnabled 0x0001
++#define kPulseDialingEnabled 0x0002
++#define kModeSwitchEnabled 0x0004
++#define kBlindDialingEnabled 0x0008
++#define kPulseDialingMethodMask 0x0030
++#define kDialModifierTranslationMask 0x00C0
++#define kFlashWhilePulseDialingEnabled 0x0100
++
++/* Pulse dialing method */
++#define kPulseDialingNPulsesPerDigit 0x0000
++#define kPulseDialingNplusOnePulsesPerDigit 0x0010
++#define kPulseDialingTenMinusNPulsesPerDigit 0x0020
++
++/* Dial modifier translation */
++#define kTreatWasPause 0x0040 /* Tread 'W' modifier as pause */
++#define kTreatCommaAsWaitForDialtone 0x0080
++
++#ifdef TI_C6X
++#include "C6xDefs.h"
++#endif
++#ifdef PENTIUM_MMX
++#include "PentiumDefs.h"
++#endif
++
++
++#if defined(DSP16K) && !defined(SoftModemGlobals)
++/* ensure that code generator does not use r5 */
++register int *softmodem_h_should_not_be_included_after_softmodem_gh asm("r5");
++#endif
++
++/****************************************************************************/
++/* 3. Interface functions. */
++/* */
++/****************************************************************************/
++
++#ifdef ADSL_MODEM
++
++#ifndef SoftDslHeader
++#include "SoftDsl.h"
++#endif
++extern char* SM_DECL SoftModemGetRevString(void);
++extern char* SM_DECL SoftModemGetProductName(void);
++extern char* SM_DECL SoftModemGetBuildDate(void);
++extern char* SM_DECL SoftModemGetFullManufacturerName(void);
++extern char* SM_DECL SoftModemGetShortManufacturerName(void);
++extern int SM_DECL SoftModemRevStringSize(void);
++extern char* SM_DECL SoftModemGetVendorIDString(void);
++extern char* SM_DECL SoftModemGetT1413VendorIDString(void);
++extern char* SM_DECL SoftModemGetSerialNumberString(void);
++extern int SM_DECL SoftModemSerNumStringSize(void);
++#define SoftDslGetProductName SoftModemGetProductName
++#define SoftDslGetBuildDate SoftModemGetBuildDate
++#define SoftDslGetFullManufacturerName SoftModemGetFullManufacturerName
++#define SoftDslGetShortManufacturerName SoftModemGetShortManufacturerName
++
++#else /* !ADSL_MODEM */
++
++extern void SM_DECL SoftModemSetMemoryPtr (void *varsPtr);
++extern void* SM_DECL SoftModemGetMemoryPtr (void);
++extern void SM_DECL SoftModemSetRefData (void *varsPtr);
++extern void* SM_DECL SoftModemGetRefData (void);
++extern int SM_DECL SoftModemGetMemorySize (void);
++extern void SM_DECL SoftModemInit (void);
++extern void SM_DECL SoftModemReset (void);
++extern void SM_DECL SoftModemLineHandler (int sampleCount, short *srcPtr, short *dstPtr);
++extern void SM_DECL SoftModemTimer (long timeQ24ms);
++extern Boolean SM_DECL SoftModemCommandHandler (modemCommandStruct *cmdPtr);
++extern int SM_DECL SoftModemGetExternalMemorySize(void);
++extern void SM_DECL SoftModemSetExternalMemoryPtr(void *varsPtr);
++
++extern void SM_DECL SoftModemSetPcmCoding (pcmCodingType pcmCoding);
++extern void SM_DECL SoftModemPcmLineHandler (int sampleCount, uchar *srcPtr, uchar *dstPtr);
++
++/* SoftModem IO functions */
++extern int SM_DECL SoftModemWrite(int nBytes, uchar* srcPtr);
++extern int SM_DECL SoftModemRead(int nBytes, uchar* dstPtr);
++extern int SM_DECL SoftModemWriteFrame(int nBytes, uchar* srcPtr);
++extern int SM_DECL SoftModemReadFrame(int maxFrameSize, uchar* dstPtr);
++extern int SM_DECL SoftModemCountWritePending(void);
++extern int SM_DECL SoftModemCountReadPending(void);
++extern int SM_DECL SoftModemWriteSpaceAvailable(void);
++extern void SM_DECL SoftModemWriteFlush(void);
++extern void SM_DECL SoftModemReadFlush(void);
++extern int SM_DECL SoftModemGetWriteBufferSize(void);
++extern int SM_DECL SoftModemGetReadBufferSize(void);
++
++#ifdef AUDIO
++extern int SM_DECL SoftModemAudioHandler(int sampleCount, short *srcPtr, short *dstPtr);
++extern int SM_DECL SoftModemAudioRxDataHandler(int nBytes, uchar* srcPtr);
++extern int SM_DECL SoftModemAudioTxDataHandler(int nBytes, uchar* dstPtr);
++#endif
++
++
++#define SoftModemSetGlobalPtr SoftModemSetMemoryPtr
++#define SoftModem SoftModemLineHandler
++#ifndef LINKLAYER_V42BIS_LARGE_DICTIONARY
++#define kSoftModemMaxMemorySize (65536)
++#else
++#define kSoftModemMaxMemorySize (65536 + 8192)
++#endif
++
++/*
++ * Internal functions
++ */
++extern long SM_DECL SoftModemGetDCOffset(void);
++extern void SM_DECL SoftModemDisableDCOffsetTracking(void);
++extern void SM_DECL SoftModemEnableDCOffsetTracking(void);
++extern long SM_DECL SoftModemGetRcvPower(void);
++extern ulong SM_DECL SoftModemGetHybridDelay(void);
++extern void SM_DECL SoftModemStatusHandler (modemStatusStruct *status);
++extern Boolean SM_DECL SoftModemInternalCommandHandler (modemCommandStruct *cmdPtr);
++extern void SM_DECL SoftModemInternalStatusHandler (modemStatusStruct *status);
++extern void SM_DECL SoftModemSetControllerOnlyMode(commandHandlerType externalDataPumpCommandHandlerPtr);
++extern char* SM_DECL SoftModemGetRevString(void);
++extern char* SM_DECL SoftModemGetProductName(void);
++extern char* SM_DECL SoftModemGetBuildDate(void);
++extern char* SM_DECL SoftModemGetFullManufacturerName(void);
++extern char* SM_DECL SoftModemGetShortManufacturerName(void);
++extern int SM_DECL SoftModemRevStringSize(void);
++extern char* SM_DECL SoftModemGetVendorIDString(void);
++extern char* SM_DECL SoftModemGetSerialNumberString(void);
++extern void SM_DECL SoftModemAuxTxDataHandler(int nBytes, uchar *dataPtr);
++extern void SM_DECL SoftModemAuxRxDataHandler(int nBytes, uchar *dataPtr);
++extern void SM_DECL SoftModemTxDataHandler(int nBytes, uchar *dataPtr);
++extern void SM_DECL SoftModemRxDataHandler(int nBytes, uchar *dataPtr);
++extern void SM_DECL SoftModemATPrintf(uchar *format, void *arg1, void *arg2, void *arg3);
++
++#define SoftModemSetInputSaturationLimit(limit) (gSystemVars.inputSignalLimit = limit)
++#define SoftModemResetInputSaturationLimit() (gSystemVars.inputSignalLimit = 0)
++
++#endif /* !ADSL_MODEM */
++
++#endif /* SoftModemPh */
+diff -urN linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/impl1/softdsl/SoftModemTypes.h linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/impl1/softdsl/SoftModemTypes.h
+--- linux-2.6.8.1/bcmdrivers/broadcom/char/adsl/impl1/softdsl/SoftModemTypes.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/char/adsl/impl1/softdsl/SoftModemTypes.h 2006-06-26 09:07:10.000000000 +0200
+@@ -0,0 +1,292 @@
++/*
++<:copyright-broadcom
++
++ Copyright (c) 2002 Broadcom Corporation
++ All Rights Reserved
++ No portions of this material may be reproduced in any form without the
++ written permission of:
++ Broadcom Corporation
++ 16215 Alton Parkway
++ Irvine, California 92619
++ All information contained in this document is Broadcom Corporation
++ company private, proprietary, and trade secret.
++
++:>
++*/
++/****************************************************************************
++ *
++ * SoftModemTypes.h
++ *
++ *
++ * Description:
++ * This file contains some of the type declarations for SoftModem
++ *
++ * Copyright (c) 1993-1997 AltoCom, Inc. All rights reserved.
++ * Authors: Mark Gonikberg, Haixiang Liang.
++ *
++ * $Revision: 1.9 $
++ *
++ * $Id: SoftModemTypes.h,v 1.9 2004/04/13 00:16:59 ilyas Exp $
++ *
++ * $Log: SoftModemTypes.h,v $
++ * Revision 1.9 2004/04/13 00:16:59 ilyas
++ * Merged the latest ADSL driver changes
++ *
++ * Revision 1.8 2004/01/24 01:35:33 ytan
++ * add multi-section lmem swap
++ *
++ * Revision 1.7 2001/09/21 19:19:01 ilyas
++ * Minor fixes for VxWorks build
++ *
++ * Revision 1.6 2001/08/16 02:16:39 khp
++ * - added definitions for SLOW_DATA and FAST_TEXT, defined to nothing
++ * except when bcm47xx && USE_SLOW_DATA or USE_FAST_TEXT. Any function
++ * that needs to run fast should be marked with FAST_TEXT. Any data that
++ * is not referenced often should be marked with SLOW_DATA.
++ *
++ * Revision 1.5 2001/03/30 00:49:59 liang
++ * Changed warning output message.
++ *
++ * Revision 1.4 2000/06/21 22:24:40 yongbing
++ * Modify WARN micro to limit the number of same warnings printed
++ *
++ * Revision 1.3 1999/08/05 20:02:13 liang
++ * Merged with the softmodem top of the tree on 08/04/99.
++ *
++ * Revision 1.2 1999/01/27 22:14:29 liang
++ * Merge with SoftModem_3_1_02.
++ *
++ * Revision 1.19 1998/11/17 04:02:39 yura
++ * Fixed WARN and ASSERT redefinition warning for WinNT targets
++ *
++ * Revision 1.18 1998/08/26 19:20:43 scott
++ * Commented out EXCLUDE_CYGWIN32_TYPES define
++ *
++ * Revision 1.17 1998/08/13 19:03:06 scott
++ * Added BitField definition and INT_IS_LONG
++ *
++ * Revision 1.16 1998/08/08 03:39:55 scott
++ * The DEBUG_PTR_ENABLED macro can be used to enable only the DEBUG_PTR macros
++ *
++ * Revision 1.15 1998/07/28 22:21:31 mwg
++ * Fixed problems with NULL & nil being defined incorrectly
++ *
++ * Revision 1.14 1998/07/08 17:09:17 scott
++ * Define ASSERT and WARN only if not already defined
++ *
++ * Revision 1.13 1998/07/02 20:46:34 scott
++ * Added workaround for building certain builds with older SunOS
++ *
++ * Revision 1.12 1998/02/09 18:24:49 scott
++ * Defined "Private" as nothing for GreenHill (to prevent erroneous section
++ * allocations for data)
++ *
++ * Revision 1.11 1997/08/29 21:39:24 scott
++ * Added check for LONG_IS_INT define (for TI C6X support)
++ *
++ * Revision 1.10 1997/05/29 19:50:23 mwg
++ * Added code to avoid type redefintions under SunOS.
++ *
++ * Revision 1.9 1997/03/19 18:35:08 mwg
++ * Changed copyright notice.
++ *
++ * Revision 1.8 1997/02/11 00:05:53 mwg
++ * Minor adjustments for Pentium optimization.
++ *
++ * Revision 1.7 1997/01/11 01:30:47 mwg
++ * Added new macro WARN -- the same as ASSERT but without exit.
++ *
++ * Revision 1.6 1996/08/22 20:07:39 liang
++ * When ASSERT fires, only print out information, don't exit.
++ *
++ * Revision 1.5 1996/05/06 06:49:10 mwg
++ * Fixed linux problems.
++ *
++ * Revision 1.4 1996/05/02 08:40:16 mwg
++ * Merged in Chromatic bug fixes.
++ *
++ * Revision 1.3 1996/04/01 20:59:53 mwg
++ * Added macros to setup and use debug pointer.
++ *
++ * Revision 1.2 1996/02/27 01:50:04 mwg
++ * Added ASSERT() macro.
++ *
++ * Revision 1.1.1.1 1996/02/14 02:35:13 mwg
++ * Redesigned the project directory structure. Merged V.34 into the project.
++ *
++ * Revision 1.2 1995/12/03 06:59:31 mwg
++ * Fixed all gcc varnings. We are now running under Linux on a PC!
++ *
++ *****************************************************************************/
++#ifndef SoftModemTypesh
++#define SoftModemTypesh
++
++#ifdef LONG_SHORTS
++#define short long
++#define ushort unsigned long
++#endif
++
++typedef signed char schar;
++typedef unsigned char uchar;
++
++#if 0 /* This is not currently required */
++#if defined(_CYGWIN32) && defined(DEBUG)
++#define EXCLUDE_CYGWIN32_TYPES
++#endif
++#endif
++
++#if !defined(_SYS_TYPES_H) || !defined(TARG_OS_RTEMS)
++#if defined(_CFE_)
++ typedef unsigned int uint;
++ typedef unsigned long ulong;
++ typedef unsigned short ushort;
++#elif defined(TARG_OS_RTEMS)
++#if defined(HOST_ARCH_LINUX)
++ typedef unsigned int uint;
++#endif
++ typedef unsigned long ulong;
++#if defined(HOST_ARCH_LINUX)
++ typedef unsigned short ushort;
++#endif
++#elif defined(EXCLUDE_CYGWIN32_TYPES) || (!defined _NO_TYPE_DEFS_ && !defined _SYS_TYPES_H && !defined __SYS_TYPES_H__ && !defined _SYS_BSD_TYPES_H && !defined _LINUX_TYPES_H) || defined(__sparc__)
++#ifndef EXCLUDE_CYGWIN32_TYPES
++ typedef unsigned int uint;
++#endif
++#ifndef _LINUX_TYPES_H
++ typedef unsigned long ulong;
++#endif
++#if !defined(ushort) && !defined(EXCLUDE_CYGWIN32_TYPES) && !defined(__INCvxTypesOldh)
++ typedef unsigned short ushort;
++#endif
++#endif
++#else
++typedef unsigned long ulong;
++#endif
++
++#if defined(GREENHILL) || defined(GNUTX39) /* GH allocates private data to incorrect section */
++#define Private
++#else
++#define Private static
++#endif
++
++#define Public
++
++#ifdef NULL
++#undef NULL
++#endif
++#ifdef nil
++#undef nil
++#endif
++
++#define NULL 0
++#define nil 0
++
++#define false 0
++#define true 1
++typedef unsigned char Boolean;
++typedef unsigned int BitField; /* this must occur BEFORE long_is_int/int_is_long defs */
++
++#ifdef LONG_IS_INT
++#define long int
++#define ulong uint
++#endif
++
++#ifdef INT_IS_LONG
++#define int long
++#define uint ulong
++#endif
++
++#define POSTULATE(postulate) \
++ do \
++ { \
++ typedef struct \
++ { \
++ char NegativeSizeIfPostulateFalse[((int)(postulate))*2 - 1]; \
++ } PostulateCheckStruct; \
++ } \
++ while (0)
++
++#if defined(DEBUG) && !defined(__KERNEL__)
++#ifndef WARN
++#define kDSLNumberWarnTimes 10
++#define WARN(assertion) \
++ { static int warnSeveralTimes=0; \
++ if ((!(assertion))&(warnSeveralTimes<kDSLNumberWarnTimes)) \
++ { \
++ fprintf(stderr, "Warning, failed: %s\n", #assertion); \
++ fprintf(stderr, "%s:%d\n", __FILE__, __LINE__); \
++ warnSeveralTimes++; \
++ } \
++ }
++#endif
++#ifndef ASSERT
++#define ASSERT(assertion) \
++ { if (!(assertion)) \
++ { \
++ fprintf(stderr, "Assertion failed: %s\n", #assertion); \
++ fprintf(stderr, "%s:%d\n", __FILE__, __LINE__); \
++ exit(1); \
++ } \
++ }
++#endif
++#else
++
++#undef WARN
++#define WARN(a)
++
++#undef ASSERT
++#define ASSERT(a)
++
++#endif
++
++/*
++ * memory allocation macros
++ */
++
++#if defined(bcm47xx) && defined(USE_SLOW_DATA)
++#define SLOW_DATA __attribute__ ((section(".slow_data")))
++#else
++#define SLOW_DATA
++#endif
++
++#if defined(bcm47xx) && defined(USE_FAST_TEXT)
++#define FAST_TEXT __attribute__ ((section(".fast_text")))
++#else
++#define FAST_TEXT
++#endif
++
++#if defined(bcm47xx) && defined(SWAP_LMEM)
++#define SWAP_TEXT1_1 __attribute__ ((section(".swap_text1_1")))
++#define SWAP_TEXT1_2 __attribute__ ((section(".swap_text1_2")))
++#define SWAP_TEXT2_1 __attribute__ ((section(".swap_text2_1")))
++#define SWAP_TEXT2_2 __attribute__ ((section(".swap_text2_2")))
++#define SWAP_TEXT3_1 __attribute__ ((section(".swap_text3_1")))
++#define SWAP_TEXT3_2 __attribute__ ((section(".swap_text3_2")))
++#else
++#define SWAP_TEXT1_1 FAST_TEXT
++#define SWAP_TEXT1_2 FAST_TEXT
++#define SWAP_TEXT2_1 FAST_TEXT
++#define SWAP_TEXT2_2 FAST_TEXT
++#define SWAP_TEXT3_1 FAST_TEXT
++#define SWAP_TEXT3_2 FAST_TEXT
++#endif
++
++/*
++ * Debug stuff
++ */
++#if defined(DEBUG) || defined(DEBUG_PTR_ENABLED)
++#define DECLARE_DEBUG_PTR(type) static type *gv;
++#define SETUP_DEBUG_PTR() gv = &globalVar
++#else
++#define DECLARE_DEBUG_PTR(type)
++#define SETUP_DEBUG_PTR()
++#endif
++/*
++ * Obsolete stuff
++ */
++#ifdef DEBUG
++#define HereIsTheGlobalVarPointerMacro SETUP_DEBUG_PTR();
++#else
++#define HereIsTheGlobalVarPointerMacro
++#endif
++#endif
+diff -urN linux-2.6.8.1/bcmdrivers/broadcom/include/bcm963xx/6338_common.h linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/include/bcm963xx/6338_common.h
+--- linux-2.6.8.1/bcmdrivers/broadcom/include/bcm963xx/6338_common.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/include/bcm963xx/6338_common.h 2006-06-26 09:07:10.000000000 +0200
+@@ -0,0 +1,207 @@
++/*
++<:copyright-broadcom
++
++ Copyright (c) 2002 Broadcom Corporation
++ All Rights Reserved
++ No portions of this material may be reproduced in any form without the
++ written permission of:
++ Broadcom Corporation
++ 16215 Alton Parkway
++ Irvine, California 92619
++ All information contained in this document is Broadcom Corporation
++ company private, proprietary, and trade secret.
++
++:>
++*/
++/***********************************************************************/
++/* */
++/* MODULE: 6338_common.h */
++/* DATE: 05/10/04 */
++/* PURPOSE: Define addresses of major hardware components of */
++/* BCM6338 */
++/* */
++/***********************************************************************/
++#ifndef __BCM6338_MAP_COMMON_H
++#define __BCM6338_MAP_COMMON_H
++
++#if __cplusplus
++extern "C" {
++#endif
++
++#define PERF_BASE 0xfffe0000 /* chip control registers */
++#define BB_BASE 0xfffe0100 /* bus bridge registers */
++#define TIMR_BASE 0xfffe0200 /* timer registers */
++#define UART_BASE 0xfffe0300 /* uart registers */
++#define GPIO_BASE 0xfffe0400 /* gpio registers */
++#define SPI_BASE 0xfffe0c00 /* SPI master controller registers */
++
++#define ADSL_BASE 0xfffe1000 /* ADSL core control registers */
++#define ATM_BASE 0xfffe2000 /* ATM SAR control registers */
++#define EMAC_DMA_BASE 0xfffe2400 /* EMAC DMA control registers */
++#define USB_DMA_BASE 0xfffe2400 /* USB DMA control registers */
++#define EMAC1_BASE 0xfffe2800 /* EMAC1 control registers */
++#define USB_CTL_BASE 0xfffe3000 /* USB control registers */
++#define SDRAM_BASE 0xfffe3100 /* SDRAM control registers */
++
++
++/*
++#####################################################################
++# System PLL Control Register
++#####################################################################
++*/
++
++#define SOFT_RESET 0x00000001
++
++/*
++#####################################################################
++# SDRAM Control Registers
++#####################################################################
++*/
++#define SDR_INIT_CTL 0x00
++ /* Control Bits */
++#define SDR_PFEN1 (1<<16)
++#define SDR_PFEN0 (1<<15)
++#define SDR_EMPRS (1<<14)
++#define SDR_2_BANKS (1<<13)
++#define SDR_1_BANK (0<<13)
++#define SDR_CS1_EN (1<<12)
++#define SDR_PEND (1<<11)
++#define SDR_32_BIT (1<<10)
++#define SDR_POWER_DOWN (1<<9)
++#define SDR_SELF_REFRESH (1<<8)
++#define SDR_11_COLS (3<<6)
++#define SDR_10_COLS (2<<6)
++#define SDR_9_COLS (1<<6)
++#define SDR_8_COLS (0<<6)
++#define SDR_13_ROWS (2<<4)
++#define SDR_12_ROWS (1<<4)
++#define SDR_11_ROWS (0<<4)
++#define SDR_MASTER_EN (1<<3)
++#define SDR_MRS_CMD (1<<2)
++#define SDR_PRE_CMD (1<<1)
++#define SDR_CBR_CMD (1<<0)
++
++#define SDR_CFG_REG 0x04
++ /* Control Bits */
++#define SDR_FULL_PG 0
++#define SDR_BURST8 1
++#define SDR_BURST4 2
++#define SDR_BURST2 3
++#define SDR_FAST_MEM (1<<2)
++#define SDR_SLOW_MEM (0<<2)
++
++#define SDR_REF_CTL 0x0C
++ /* Control Bits */
++#define SDR_REF_EN (1<<15)
++
++#define SDR_PRIOR
++ /* Control Bits */
++#define SDR_EN_PRIOR (1<<31)
++
++
++/*
++#####################################################################
++# MPI Control Registers
++#####################################################################
++*/
++#define CS0BASE 0x00
++#define CS0CNTL 0x04
++
++/*
++# CSxBASE settings
++# Size in low 4 bits
++# Base Address for match in upper 24 bits
++*/
++#define EBI_SIZE_8K 0
++#define EBI_SIZE_16K 1
++#define EBI_SIZE_32K 2
++#define EBI_SIZE_64K 3
++#define EBI_SIZE_128K 4
++#define EBI_SIZE_256K 5
++#define EBI_SIZE_512K 6
++#define EBI_SIZE_1M 7
++#define EBI_SIZE_2M 8
++#define EBI_SIZE_4M 9
++#define EBI_SIZE_8M 10
++#define EBI_SIZE_16M 11
++#define EBI_SIZE_32M 12
++#define EBI_SIZE_64M 13
++#define EBI_SIZE_128M 14
++#define EBI_SIZE_256M 15
++
++/* CSxCNTL settings */
++#define EBI_ENABLE 0x00000001 /* .. enable this range */
++#define EBI_WAIT_STATES 0x0000000e /* .. mask for wait states */
++#define ZEROWT 0x00000000 /* .. 0 WS */
++#define ONEWT 0x00000002 /* .. 1 WS */
++#define TWOWT 0x00000004 /* .. 2 WS */
++#define THREEWT 0x00000006 /* .. 3 WS */
++#define FOURWT 0x00000008 /* .. 4 WS */
++#define FIVEWT 0x0000000a /* .. 5 WS */
++#define SIXWT 0x0000000c /* .. 6 WS */
++#define SEVENWT 0x0000000e /* .. 7 WS */
++#define EBI_WORD_WIDE 0x00000010 /* .. 16-bit peripheral, else 8 */
++#define EBI_POLARITY 0x00000040 /* .. set to invert chip select polarity */
++#define EBI_TS_TA_MODE 0x00000080 /* .. use TS/TA mode */
++#define EBI_TS_SEL 0x00000100 /* .. drive tsize, not bs_b */
++#define EBI_FIFO 0x00000200 /* .. enable fifo */
++#define EBI_RE 0x00000400 /* .. Reverse Endian */
++
++/*
++#####################################################################
++# UART Control Registers
++#####################################################################
++*/
++#define UART0CONTROL 0x01
++#define UART0CONFIG 0x02
++#define UART0RXTIMEOUT 0x03
++#define UART0BAUD 0x04
++#define UART0FIFOCFG 0x0a
++#define UART0INTMASK 0x10
++#define UART0INTSTAT 0x12
++#define UART0DATA 0x17
++
++#define BRGEN 0x80 /* Control register bit defs */
++#define TXEN 0x40
++#define RXEN 0x20
++#define LOOPBK 0x10
++#define TXPARITYEN 0x08
++#define TXPARITYEVEN 0x04
++#define RXPARITYEN 0x02
++#define RXPARITYEVEN 0x01
++
++#define XMITBREAK 0x40 /* Config register */
++#define BITS5SYM 0x00
++#define BITS6SYM 0x10
++#define BITS7SYM 0x20
++#define BITS8SYM 0x30
++#define ONESTOP 0x07
++#define TWOSTOP 0x0f
++
++#define RSTTXFIFOS 0x80 /* Rx Timeout register */
++#define RSTRXFIFOS 0x40
++
++#define TX4 0x40 /* FIFO config register */
++#define RX4 0x04
++
++#define DELTAIP 0x0001 /* Interrupt Status and Mask registers */
++#define TXUNDERR 0x0002
++#define TXOVFERR 0x0004
++#define TXFIFOTHOLD 0x0008
++#define TXREADLATCH 0x0010
++#define TXFIFOEMT 0x0020
++#define RXUNDERR 0x0040
++#define RXOVFERR 0x0080
++#define RXTIMEOUT 0x0100
++#define RXFIFOFULL 0x0200
++#define RXFIFOTHOLD 0x0400
++#define RXFIFONE 0x0800
++#define RXFRAMERR 0x1000
++#define RXPARERR 0x2000
++#define RXBRK 0x4000
++
++#if __cplusplus
++}
++#endif
++
++#endif
+diff -urN linux-2.6.8.1/bcmdrivers/broadcom/include/bcm963xx/6338_map.h linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/include/bcm963xx/6338_map.h
+--- linux-2.6.8.1/bcmdrivers/broadcom/include/bcm963xx/6338_map.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/include/bcm963xx/6338_map.h 2006-06-26 09:07:10.000000000 +0200
+@@ -0,0 +1,885 @@
++/*
++<:copyright-broadcom
++
++ Copyright (c) 2002 Broadcom Corporation
++ All Rights Reserved
++ No portions of this material may be reproduced in any form without the
++ written permission of:
++ Broadcom Corporation
++ 16215 Alton Parkway
++ Irvine, California 92619
++ All information contained in this document is Broadcom Corporation
++ company private, proprietary, and trade secret.
++
++:>
++*/
++/***********************************************************************/
++/* */
++/* MODULE: 6338_map.h */
++/* DATE: 05/10/04 */
++/* PURPOSE: Define addresses of major hardware components of */
++/* BCM6338 */
++/* */
++/***********************************************************************/
++#ifndef __BCM6338_MAP_H
++#define __BCM6338_MAP_H
++
++#if __cplusplus
++extern "C" {
++#endif
++
++#include "bcmtypes.h"
++#include "6338_common.h"
++#include "6338_intr.h"
++
++/* macro to convert logical data addresses to physical */
++/* DMA hardware must see physical address */
++#define LtoP( x ) ( (uint32)x & 0x1fffffff )
++#define PtoL( x ) ( LtoP(x) | 0xa0000000 )
++
++/*
++** Interrupt Controller
++*/
++typedef struct PerfControl {
++ uint32 RevID; /* (00) */
++ uint16 testControl; /* (04) */
++ uint16 blkEnables; /* (06) */
++
++#define ADSL_CLK_EN 0x0001
++#define MPI_CLK_EN 0x0002
++#define DRAM_CLK_EN 0x0004
++#define EMAC_CLK_EN 0x0010
++#define USBS_CLK_EN 0x0010
++#define SAR_CLK_EN 0x0020
++#define SPI_CLK_EN 0x0200
++
++ uint32 pll_control; /* (08) */
++#define CHIP_SOFT_RESET 0x00000001
++
++ uint32 IrqMask; /* (0c) */
++ uint32 IrqStatus; /* (10) */
++
++ uint32 ExtIrqCfg;
++#define EI_SENSE_SHFT 0
++#define EI_STATUS_SHFT 5
++#define EI_CLEAR_SHFT 10
++#define EI_MASK_SHFT 15
++#define EI_INSENS_SHFT 20
++#define EI_LEVEL_SHFT 25
++
++ uint32 unused[4]; /* (18) */
++ uint32 BlockSoftReset; /* (28) */
++#define BSR_SPI 0x00000001
++#define BSR_EMAC 0x00000004
++#define BSR_USBH 0x00000008
++#define BSR_USBS 0x00000010
++#define BSR_ADSL 0x00000020
++#define BSR_DMAMEM 0x00000040
++#define BSR_SAR 0x00000080
++#define BSR_ACLC 0x00000100
++#define BSR_ADSL_MIPS_PLL 0x00000400
++#define BSR_ALL_BLOCKS \
++ (BSR_SPI | BSR_EMAC | BSR_USBH | BSR_USBS | BSR_ADSL | BSR_DMAMEM | \
++ BSR_SAR | BSR_ACLC | BSR_ADSL_MIPS_PLL)
++} PerfControl;
++
++#define PERF ((volatile PerfControl * const) PERF_BASE)
++
++/*
++** Bus Bridge Registers
++*/
++typedef struct BusBridge {
++ uint16 status;
++#define BB_BUSY 0x8000 /* posted operation in progress */
++#define BB_RD_PND 0x4000 /* read pending */
++#define BB_RD_CMPLT 0x2000 /* read complete */
++#define BB_ERROR 0x1000 /* posted write error */
++#define BB_TEA 0x0800 /* transfer aborted */
++ uint16 abortTimeoutCnt; /* abort timeout value */
++
++ byte writePostEnable;
++#define BB_POST_TIMR_EN 0x08 /* post writes to timer regs */
++#define BB_POST_GPIO_EN 0x04 /* post writes to gpio regs */
++#define BB_POST_INTC_EN 0x02 /* post writes to interrupt controller regs */
++#define BB_POST_UART_EN 0x01 /* post writes to uart regs */
++ byte unused1[5];
++ uint16 postAddr; /* posted read address (lower half) */
++ byte unused2[3];
++ byte postData; /* posted read data */
++} BusBridge;
++
++/* register offsets (needed for EBI master access) */
++#define BB_STATUS 0
++#define BB_ABORT_TO_CNT 2
++#define BB_WR_POST_EN 4
++#define BB_RD_POST_ADDR 10
++#define BB_RD_POST_DATA 12
++
++#define BRIDGE *bridge ((volatile BusBridge * const) BB_BASE)
++
++/*
++** Timer
++*/
++typedef struct Timer {
++ uint16 unused0;
++ byte TimerMask;
++#define TIMER0EN 0x01
++#define TIMER1EN 0x02
++#define TIMER2EN 0x04
++ byte TimerInts;
++#define TIMER0 0x01
++#define TIMER1 0x02
++#define TIMER2 0x04
++#define WATCHDOG 0x08
++ uint32 TimerCtl0;
++ uint32 TimerCtl1;
++ uint32 TimerCtl2;
++#define TIMERENABLE 0x80000000
++#define RSTCNTCLR 0x40000000
++ uint32 TimerCnt0;
++ uint32 TimerCnt1;
++ uint32 TimerCnt2;
++ uint32 WatchDogDefCount;
++
++ /* Write 0xff00 0x00ff to Start timer
++ * Write 0xee00 0x00ee to Stop and re-load default count
++ * Read from this register returns current watch dog count
++ */
++ uint32 WatchDogCtl;
++
++ /* Number of 40-MHz ticks for WD Reset pulse to last */
++ uint32 WDResetCount;
++} Timer;
++
++#define TIMER ((volatile Timer * const) TIMR_BASE)
++
++/*
++** UART
++*/
++typedef struct UartChannel {
++ byte unused0;
++ byte control;
++#define BRGEN 0x80 /* Control register bit defs */
++#define TXEN 0x40
++#define RXEN 0x20
++#define LOOPBK 0x10
++#define TXPARITYEN 0x08
++#define TXPARITYEVEN 0x04
++#define RXPARITYEN 0x02
++#define RXPARITYEVEN 0x01
++
++ byte config;
++#define XMITBREAK 0x40
++#define BITS5SYM 0x00
++#define BITS6SYM 0x10
++#define BITS7SYM 0x20
++#define BITS8SYM 0x30
++#define ONESTOP 0x07
++#define TWOSTOP 0x0f
++ /* 4-LSBS represent STOP bits/char
++ * in 1/8 bit-time intervals. Zero
++ * represents 1/8 stop bit interval.
++ * Fifteen represents 2 stop bits.
++ */
++ byte fifoctl;
++#define RSTTXFIFOS 0x80
++#define RSTRXFIFOS 0x40
++ /* 5-bit TimeoutCnt is in low bits of this register.
++ * This count represents the number of characters
++ * idle times before setting receive Irq when below threshold
++ */
++ uint32 baudword;
++ /* When divide SysClk/2/(1+baudword) we should get 32*bit-rate
++ */
++
++ byte txf_levl; /* Read-only fifo depth */
++ byte rxf_levl; /* Read-only fifo depth */
++ byte fifocfg; /* Upper 4-bits are TxThresh, Lower are
++ * RxThreshold. Irq can be asserted
++ * when rx fifo> thresh, txfifo<thresh
++ */
++ byte prog_out; /* Set value of DTR (Bit0), RTS (Bit1)
++ * if these bits are also enabled to GPIO_o
++ */
++#define DTREN 0x01
++#define RTSEN 0x02
++
++ byte unused1;
++ byte DeltaIPEdgeNoSense; /* Low 4-bits, set corr bit to 1 to
++ * detect irq on rising AND falling
++ * edges for corresponding GPIO_i
++ * if enabled (edge insensitive)
++ */
++ byte DeltaIPConfig_Mask; /* Upper 4 bits: 1 for posedge sense
++ * 0 for negedge sense if
++ * not configured for edge
++ * insensitive (see above)
++ * Lower 4 bits: Mask to enable change
++ * detection IRQ for corresponding
++ * GPIO_i
++ */
++ byte DeltaIP_SyncIP; /* Upper 4 bits show which bits
++ * have changed (may set IRQ).
++ * read automatically clears bit
++ * Lower 4 bits are actual status
++ */
++
++ uint16 intMask; /* Same Bit defs for Mask and status */
++ uint16 intStatus;
++#define DELTAIP 0x0001
++#define TXUNDERR 0x0002
++#define TXOVFERR 0x0004
++#define TXFIFOTHOLD 0x0008
++#define TXREADLATCH 0x0010
++#define TXFIFOEMT 0x0020
++#define RXUNDERR 0x0040
++#define RXOVFERR 0x0080
++#define RXTIMEOUT 0x0100
++#define RXFIFOFULL 0x0200
++#define RXFIFOTHOLD 0x0400
++#define RXFIFONE 0x0800
++#define RXFRAMERR 0x1000
++#define RXPARERR 0x2000
++#define RXBRK 0x4000
++
++ uint16 unused2;
++ uint16 Data; /* Write to TX, Read from RX */
++ /* bits 11:8 are BRK,PAR,FRM errors */
++
++ uint32 unused3;
++ uint32 unused4;
++} Uart;
++
++#define UART ((volatile Uart * const) UART_BASE)
++
++/*
++** Gpio Controller
++*/
++
++typedef struct GpioControl {
++ uint32 unused0;
++ uint32 GPIODir; /* bits 7:0 */
++ uint32 unused1; /* bits 36:32 */
++ uint32 GPIOio;
++ uint32 LEDCtrl;
++#define LED3_STROBE 0x08000000
++#define LED2_STROBE 0x04000000
++#define LED1_STROBE 0x02000000
++#define LED0_STROBE 0x01000000
++#define LED_TEST 0x00010000
++#define LED3_DISABLE_LINK_ACT 0x00008000
++#define LED2_DISABLE_LINK_ACT 0x00004000
++#define LED1_DISABLE_LINK_ACT 0x00002000
++#define LED0_DISABLE_LINK_ACT 0x00001000
++#define LED_INTERVAL_SET_MASK 0x00000f00
++#define LED_INTERVAL_SET_320MS 0x00000500
++#define LED_INTERVAL_SET_160MS 0x00000400
++#define LED_INTERVAL_SET_80MS 0x00000300
++#define LED_INTERVAL_SET_40MS 0x00000200
++#define LED_INTERVAL_SET_20MS 0x00000100
++#define LED3_ON 0x00000080
++#define LED2_ON 0x00000040
++#define LED1_ON 0x00000020
++#define LED0_ON 0x00000010
++#define LED3_ENABLE 0x00000008
++#define LED2_ENABLE 0x00000004
++#define LED1_ENABLE 0x00000002
++#define LED0_ENABLE 0x00000001
++ uint32 SpiSlaveCfg;
++#define SPI_SLAVE_RESET 0x00010000
++#define SPI_RESTRICT 0x00000400
++#define SPI_DELAY_DISABLE 0x00000200
++#define SPI_PROBE_MUX_SEL_MASK 0x000001e0
++#define SPI_SER_ADDR_CFG_MASK 0x0000000c
++#define SPI_MODE 0x00000001
++ uint32 vRegConfig;
++} GpioControl;
++
++#define GPIO ((volatile GpioControl * const) GPIO_BASE)
++
++/* Number to mask conversion macro used for GPIODir and GPIOio */
++#define GPIO_NUM_MAX_BITS_MASK 0x0f
++#define GPIO_NUM_TO_MASK(X) (1 << ((X) & GPIO_NUM_MAX_BITS_MASK))
++
++/*
++** Spi Controller
++*/
++
++typedef struct SpiControl {
++ uint16 spiCmd; /* (0x0): SPI command */
++#define SPI_CMD_NOOP 0
++#define SPI_CMD_SOFT_RESET 1
++#define SPI_CMD_HARD_RESET 2
++#define SPI_CMD_START_IMMEDIATE 3
++
++#define SPI_CMD_COMMAND_SHIFT 0
++#define SPI_CMD_DEVICE_ID_SHIFT 4
++#define SPI_CMD_PREPEND_BYTE_CNT_SHIFT 8
++#define SPI_CMD_ONE_BYTE_SHIFT 11
++#define SPI_CMD_ONE_WIRE_SHIFT 12
++#define SPI_DEV_ID_0 0
++#define SPI_DEV_ID_1 1
++#define SPI_DEV_ID_2 2
++#define SPI_DEV_ID_3 3
++
++ byte spiIntStatus; /* (0x2): SPI interrupt status */
++ byte spiMaskIntStatus; /* (0x3): SPI masked interrupt status */
++
++ byte spiIntMask; /* (0x4): SPI interrupt mask */
++#define SPI_INTR_CMD_DONE 0x01
++#define SPI_INTR_RX_OVERFLOW 0x02
++#define SPI_INTR_INTR_TX_UNDERFLOW 0x04
++#define SPI_INTR_TX_OVERFLOW 0x08
++#define SPI_INTR_RX_UNDERFLOW 0x10
++#define SPI_INTR_CLEAR_ALL 0x1f
++
++ byte spiStatus; /* (0x5): SPI status */
++#define SPI_RX_EMPTY 0x02
++#define SPI_CMD_BUSY 0x04
++#define SPI_SERIAL_BUSY 0x08
++
++ byte spiClkCfg; /* (0x6): SPI clock configuration */
++#define SPI_CLK_0_391MHZ 1
++#define SPI_CLK_0_781MHZ 2 /* default */
++#define SPI_CLK_1_563MHZ 3
++#define SPI_CLK_3_125MHZ 4
++#define SPI_CLK_6_250MHZ 5
++#define SPI_CLK_12_50MHZ 6
++#define SPI_CLK_MASK 0x07
++#define SPI_SSOFFTIME_MASK 0x38
++#define SPI_SSOFFTIME_SHIFT 3
++#define SPI_BYTE_SWAP 0x80
++
++ byte spiFillByte; /* (0x7): SPI fill byte */
++
++ byte unused0;
++ byte spiMsgTail; /* (0x9): msgtail */
++ byte unused1;
++ byte spiRxTail; /* (0xB): rxtail */
++
++ uint32 unused2[13]; /* (0x0c - 0x3c) reserved */
++
++ byte spiMsgCtl; /* (0x40) control byte */
++#define FULL_DUPLEX_RW 0
++#define HALF_DUPLEX_W 1
++#define HALF_DUPLEX_R 2
++#define SPI_MSG_TYPE_SHIFT 6
++#define SPI_BYTE_CNT_SHIFT 0
++ byte spiMsgData[63]; /* (0x41 - 0x7f) msg data */
++ byte spiRxDataFifo[64]; /* (0x80 - 0xbf) rx data */
++ byte unused3[64]; /* (0xc0 - 0xff) reserved */
++} SpiControl;
++
++#define SPI ((volatile SpiControl * const) SPI_BASE)
++
++#define IUDMA_MAX_CHANNELS 16
++
++/*
++** DMA Channel Configuration (1 .. 16)
++*/
++typedef struct DmaChannelCfg {
++ uint32 cfg; /* (00) assorted configuration */
++#define DMA_BURST_HALT 0x00000004 /* idle after finish current memory burst */
++#define DMA_PKT_HALT 0x00000002 /* idle after an EOP flag is detected */
++#define DMA_ENABLE 0x00000001 /* set to enable channel */
++ uint32 intStat; /* (04) interrupts control and status */
++ uint32 intMask; /* (08) interrupts mask */
++#define DMA_BUFF_DONE 0x00000001 /* buffer done */
++#define DMA_DONE 0x00000002 /* packet xfer complete */
++#define DMA_NO_DESC 0x00000004 /* no valid descriptors */
++ uint32 maxBurst; /* (0C) max burst length permitted */
++} DmaChannelCfg;
++
++/*
++** DMA State RAM (1 .. 16)
++*/
++typedef struct DmaStateRam {
++ uint32 baseDescPtr; /* (00) descriptor ring start address */
++ uint32 state_data; /* (04) state/bytes done/ring offset */
++ uint32 desc_len_status; /* (08) buffer descriptor status and len */
++ uint32 desc_base_bufptr; /* (0C) buffer descrpitor current processing */
++} DmaStateRam;
++
++/*
++** DMA Registers
++*/
++typedef struct DmaRegs {
++#define DMA_MASTER_EN 0x00000001
++#define DMA_FLOWC_CH1_EN 0x00000002
++#define DMA_FLOWC_CH3_EN 0x00000004
++#define DMA_NUM_CHS_MASK 0x0f000000
++#define DMA_NUM_CHS_SHIFT 24
++#define DMA_FLOWCTL_MASK 0x30000000
++#define DMA_FLOWCTL_CH1 0x10000000
++#define DMA_FLOWCTL_CH3 0x20000000
++#define DMA_FLOWCTL_SHIFT 28
++ uint32 controller_cfg; /* (00) controller configuration */
++
++ // Flow control Ch1
++ uint32 flowctl_ch1_thresh_lo; /* (04) EMAC1 RX DMA channel */
++ uint32 flowctl_ch1_thresh_hi; /* (08) EMAC1 RX DMA channel */
++ uint32 flowctl_ch1_alloc; /* (0C) EMAC1 RX DMA channel */
++#define DMA_BUF_ALLOC_FORCE 0x80000000
++
++ // Flow control Ch3
++ uint32 flowctl_ch3_thresh_lo; /* (10) EMAC2 RX DMA channel */
++ uint32 flowctl_ch3_thresh_hi; /* (14) EMAC2 RX DMA channel */
++ uint32 flowctl_ch3_alloc; /* (18) EMAC2 RX DMA channel */
++
++ // Unused words
++ uint32 resv[57];
++
++ // Per channel registers/state ram
++ DmaChannelCfg chcfg[IUDMA_MAX_CHANNELS]; /* (100) Channel configuration */
++ union {
++ DmaStateRam s[IUDMA_MAX_CHANNELS];
++ uint32 u32[4 * IUDMA_MAX_CHANNELS];
++ } stram; /* (200) state ram */
++} DmaRegs;
++
++/*
++** DMA Buffer
++*/
++typedef struct DmaDesc {
++ uint16 length; /* in bytes of data in buffer */
++#define DMA_DESC_USEFPM 0x8000
++#define DMA_DESC_MULTICAST 0x4000
++#define DMA_DESC_BUFLENGTH 0x0fff
++ uint16 status; /* buffer status */
++#define DMA_OWN 0x8000 /* cleared by DMA, set by SW */
++#define DMA_EOP 0x4000 /* last buffer in packet */
++#define DMA_SOP 0x2000 /* first buffer in packet */
++#define DMA_WRAP 0x1000 /* */
++#define DMA_APPEND_CRC 0x0100
++
++/* EMAC Descriptor Status definitions */
++#define EMAC_MISS 0x0080 /* framed address recognition failed (promiscuous) */
++#define EMAC_BRDCAST 0x0040 /* DA is Broadcast */
++#define EMAC_MULT 0x0020 /* DA is multicast */
++#define EMAC_LG 0x0010 /* frame length > RX_LENGTH register value */
++#define EMAC_NO 0x0008 /* Non-Octet aligned */
++#define EMAC_RXER 0x0004 /* RX_ERR on MII while RX_DV assereted */
++#define EMAC_CRC_ERROR 0x0002 /* CRC error */
++#define EMAC_OV 0x0001 /* Overflow */
++
++/* HDLC Descriptor Status definitions */
++#define DMA_HDLC_TX_ABORT 0x0100
++#define DMA_HDLC_RX_OVERRUN 0x4000
++#define DMA_HDLC_RX_TOO_LONG 0x2000
++#define DMA_HDLC_RX_CRC_OK 0x1000
++#define DMA_HDLC_RX_ABORT 0x0100
++
++ uint32 address; /* address of data */
++} DmaDesc;
++
++/*
++** Sdram Controller
++*/
++typedef struct SdramControllerRegs {
++ uint16 unused1;
++ uint16 initControl; /* 02 */
++#define SD_POWER_DOWN 0x200 /* put sdram into power down */
++#define SD_SELF_REFRESH 0x100 /* enable self refresh mode */
++#define SD_SOFT_RESET 0x080 /* soft reset all sdram controller regs */
++#define SD_EDO_SELECT 0x040 /* select EDO mode */
++#define SD_EDO_WAIT_STATE 0x020 /* add an EDO wait state */
++#define SD_8MEG 0x010 /* map sdram to 8 megs */
++#define SD_MASTER_ENABLE 0x008 /* enable accesses to external sdram */
++#define SD_MRS 0x004 /* generate a mode register select cycle */
++#define SD_PRECHARGE 0x002 /* generate a precharge cycle */
++#define SD_CBR 0x001 /* generate a refresh cycle */
++ uint8 unused2[3];
++ uint8 config; /* 07 */
++#define SD_FAST_MEM 0x04 /* 1=CAS latency of 2, 0 = CAS latency of 3 */
++#define SD_BURST_LEN 0x03 /* set burst length */
++#define SD_BURST_FULL_PAGE 0x00 /* .. full page */
++#define SD_BURST_8 0x01 /* .. 8 words */
++#define SD_BURST_4 0x02 /* .. 4 words */
++#define SD_BURST_2 0x03 /* .. 2 words */
++ uint16 unused3;
++ uint16 refreshControl; /* 0a */
++#define SD_REFRESH_ENABLE 0x8000 /* refresh enable */
++#define SD_REFRESH_PERIOD 0x00ff /* refresh period (16 x n x clock_period) */
++
++ uint32 memoryBase; /* 0c */
++#define SD_MEMBASE_MASK 0xffffe000 /* base address mask */
++#define SD_MEMSIZE_8MEG 0x00000001 /* memory is 8 meg */
++#define SD_MEMSIZE_2MEG 0x00000001 /* memory is 2 meg */
++
++} SdramControllerRegs;
++
++/*
++** External Bus Interface
++*/
++typedef struct EbiChipSelect {
++ uint32 base; /* base address in upper 24 bits */
++#define EBI_SIZE_8K 0
++#define EBI_SIZE_16K 1
++#define EBI_SIZE_32K 2
++#define EBI_SIZE_64K 3
++#define EBI_SIZE_128K 4
++#define EBI_SIZE_256K 5
++#define EBI_SIZE_512K 6
++#define EBI_SIZE_1M 7
++#define EBI_SIZE_2M 8
++#define EBI_SIZE_4M 9
++#define EBI_SIZE_8M 10
++#define EBI_SIZE_16M 11
++#define EBI_SIZE_32M 12
++#define EBI_SIZE_64M 13
++#define EBI_SIZE_128M 14
++#define EBI_SIZE_256M 15
++ uint32 config;
++#define EBI_ENABLE 0x00000001 /* .. enable this range */
++#define EBI_WAIT_STATES 0x0000000e /* .. mask for wait states */
++#define EBI_WTST_SHIFT 1 /* .. for shifting wait states */
++#define EBI_WORD_WIDE 0x00000010 /* .. 16-bit peripheral, else 8 */
++#define EBI_WREN 0x00000020 /* enable posted writes */
++#define EBI_POLARITY 0x00000040 /* .. set to invert something,
++ ** don't know what yet */
++#define EBI_FIFO 0x00000200 /* .. use fifo */
++#define EBI_RE 0x00000400 /* .. Reverse Endian */
++} EbiChipSelect;
++
++typedef struct MpiRegisters {
++ EbiChipSelect cs[1]; /* size chip select configuration */
++} MpiRegisters;
++
++#define MPI ((volatile MpiRegisters * const) MPI_BASE)
++
++/*
++** EMAC transmit MIB counters
++*/
++typedef struct EmacTxMib {
++ uint32 tx_good_octets; /* (200) good byte count */
++ uint32 tx_good_pkts; /* (204) good pkt count */
++ uint32 tx_octets; /* (208) good and bad byte count */
++ uint32 tx_pkts; /* (20c) good and bad pkt count */
++ uint32 tx_broadcasts_pkts; /* (210) good broadcast packets */
++ uint32 tx_multicasts_pkts; /* (214) good mulitcast packets */
++ uint32 tx_len_64; /* (218) RMON tx pkt size buckets */
++ uint32 tx_len_65_to_127; /* (21c) */
++ uint32 tx_len_128_to_255; /* (220) */
++ uint32 tx_len_256_to_511; /* (224) */
++ uint32 tx_len_512_to_1023; /* (228) */
++ uint32 tx_len_1024_to_max; /* (22c) */
++ uint32 tx_jabber_pkts; /* (230) > 1518 with bad crc */
++ uint32 tx_oversize_pkts; /* (234) > 1518 with good crc */
++ uint32 tx_fragment_pkts; /* (238) < 63 with bad crc */
++ uint32 tx_underruns; /* (23c) fifo underrun */
++ uint32 tx_total_cols; /* (240) total collisions in all tx pkts */
++ uint32 tx_single_cols; /* (244) tx pkts with single collisions */
++ uint32 tx_multiple_cols; /* (248) tx pkts with multiple collisions */
++ uint32 tx_excessive_cols; /* (24c) tx pkts with excessive cols */
++ uint32 tx_late_cols; /* (250) tx pkts with late cols */
++ uint32 tx_defered; /* (254) tx pkts deferred */
++ uint32 tx_carrier_lost; /* (258) tx pkts with CRS lost */
++ uint32 tx_pause_pkts; /* (25c) tx pause pkts sent */
++#define NumEmacTxMibVars 24
++} EmacTxMib;
++
++/*
++** EMAC receive MIB counters
++*/
++typedef struct EmacRxMib {
++ uint32 rx_good_octets; /* (280) good byte count */
++ uint32 rx_good_pkts; /* (284) good pkt count */
++ uint32 rx_octets; /* (288) good and bad byte count */
++ uint32 rx_pkts; /* (28c) good and bad pkt count */
++ uint32 rx_broadcasts_pkts; /* (290) good broadcast packets */
++ uint32 rx_multicasts_pkts; /* (294) good mulitcast packets */
++ uint32 rx_len_64; /* (298) RMON rx pkt size buckets */
++ uint32 rx_len_65_to_127; /* (29c) */
++ uint32 rx_len_128_to_255; /* (2a0) */
++ uint32 rx_len_256_to_511; /* (2a4) */
++ uint32 rx_len_512_to_1023; /* (2a8) */
++ uint32 rx_len_1024_to_max; /* (2ac) */
++ uint32 rx_jabber_pkts; /* (2b0) > 1518 with bad crc */
++ uint32 rx_oversize_pkts; /* (2b4) > 1518 with good crc */
++ uint32 rx_fragment_pkts; /* (2b8) < 63 with bad crc */
++ uint32 rx_missed_pkts; /* (2bc) missed packets */
++ uint32 rx_crc_align_errs; /* (2c0) both or either */
++ uint32 rx_undersize; /* (2c4) < 63 with good crc */
++ uint32 rx_crc_errs; /* (2c8) crc errors (only) */
++ uint32 rx_align_errs; /* (2cc) alignment errors (only) */
++ uint32 rx_symbol_errs; /* (2d0) pkts with RXERR assertions (symbol errs) */
++ uint32 rx_pause_pkts; /* (2d4) MAC control, PAUSE */
++ uint32 rx_nonpause_pkts; /* (2d8) MAC control, not PAUSE */
++#define NumEmacRxMibVars 23
++} EmacRxMib;
++
++typedef struct EmacRegisters {
++ uint32 rxControl; /* (00) receive control */
++#define EMAC_PM_REJ 0x80 /* - reject DA match in PMx regs */
++#define EMAC_UNIFLOW 0x40 /* - accept cam match fc */
++#define EMAC_FC_EN 0x20 /* - enable flow control */
++#define EMAC_LOOPBACK 0x10 /* - loopback */
++#define EMAC_PROM 0x08 /* - promiscuous */
++#define EMAC_RDT 0x04 /* - ignore transmissions */
++#define EMAC_ALL_MCAST 0x02 /* - ignore transmissions */
++#define EMAC_NO_BCAST 0x01 /* - ignore transmissions */
++
++
++ uint32 rxMaxLength; /* (04) receive max length */
++ uint32 txMaxLength; /* (08) transmit max length */
++ uint32 unused1[1];
++ uint32 mdioFreq; /* (10) mdio frequency */
++#define EMAC_MII_PRE_EN 0x00000080 /* prepend preamble sequence */
++#define EMAC_MDIO_PRE 0x00000080 /* - enable MDIO preamble */
++#define EMAC_MDC_FREQ 0x0000007f /* - mdio frequency */
++
++ uint32 mdioData; /* (14) mdio data */
++#define MDIO_WR 0x50020000 /* - write framing */
++#define MDIO_RD 0x60020000 /* - read framing */
++#define MDIO_PMD_SHIFT 23
++#define MDIO_REG_SHIFT 18
++
++ uint32 intMask; /* (18) int mask */
++ uint32 intStatus; /* (1c) int status */
++#define EMAC_FLOW_INT 0x04 /* - flow control event */
++#define EMAC_MIB_INT 0x02 /* - mib event */
++#define EMAC_MDIO_INT 0x01 /* - mdio event */
++
++ uint32 unused2[3];
++ uint32 config; /* (2c) config */
++#define EMAC_ENABLE 0x001 /* - enable emac */
++#define EMAC_DISABLE 0x002 /* - disable emac */
++#define EMAC_SOFT_RST 0x004 /* - soft reset */
++#define EMAC_SOFT_RESET 0x004 /* - emac soft reset */
++#define EMAC_EXT_PHY 0x008 /* - external PHY select */
++
++ uint32 txControl; /* (30) transmit control */
++#define EMAC_FD 0x001 /* - full duplex */
++#define EMAC_FLOWMODE 0x002 /* - flow mode */
++#define EMAC_NOBKOFF 0x004 /* - no backoff in */
++#define EMAC_SMALLSLT 0x008 /* - small slot time */
++
++ uint32 txThreshold; /* (34) transmit threshold */
++ uint32 mibControl; /* (38) mib control */
++#define EMAC_NO_CLEAR 0x001 /* don't clear on read */
++
++ uint32 unused3[7];
++
++ uint32 pm0DataLo; /* (58) perfect match 0 data lo */
++ uint32 pm0DataHi; /* (5C) perfect match 0 data hi (15:0) */
++ uint32 pm1DataLo; /* (60) perfect match 1 data lo */
++ uint32 pm1DataHi; /* (64) perfect match 1 data hi (15:0) */
++ uint32 pm2DataLo; /* (68) perfect match 2 data lo */
++ uint32 pm2DataHi; /* (6C) perfect match 2 data hi (15:0) */
++ uint32 pm3DataLo; /* (70) perfect match 3 data lo */
++ uint32 pm3DataHi; /* (74) perfect match 3 data hi (15:0) */
++#define EMAC_CAM_V 0x10000 /* - cam index */
++#define EMAC_CAM_VALID 0x00010000
++
++ uint32 unused4[98]; /* (78-1fc) */
++
++ EmacTxMib tx_mib; /* (200) emac tx mib */
++ uint32 unused5[8]; /* (260-27c) */
++
++ EmacRxMib rx_mib; /* (280) rx mib */
++
++} EmacRegisters;
++
++/* register offsets for subrouting access */
++#define EMAC_RX_CONTROL 0x00
++#define EMAC_RX_MAX_LENGTH 0x04
++#define EMAC_TX_MAC_LENGTH 0x08
++#define EMAC_MDIO_FREQ 0x10
++#define EMAC_MDIO_DATA 0x14
++#define EMAC_INT_MASK 0x18
++#define EMAC_INT_STATUS 0x1C
++#define EMAC_CAM_DATA_LO 0x20
++#define EMAC_CAM_DATA_HI 0x24
++#define EMAC_CAM_CONTROL 0x28
++#define EMAC_CONTROL 0x2C
++#define EMAC_TX_CONTROL 0x30
++#define EMAC_TX_THRESHOLD 0x34
++#define EMAC_MIB_CONTROL 0x38
++
++
++#define EMAC1 ((volatile EmacRegisters * const) EMAC1_BASE)
++
++/*
++** USB Registers
++*/
++typedef struct UsbRegisters {
++ byte inttf_setting;
++ byte current_config;
++ uint16 status_frameNum;
++#define USB_LINK 0x2000
++#define USB_BUS_RESET 0x1000
++#define USB_SUSPENDED 0x0800
++ byte unused1;
++ byte endpt_prnt;
++ byte endpt_dirn;
++ byte endpt_status;
++#define USB_ENDPOINT_0 0x01
++#define USB_ENDPOINT_1 0x02
++#define USB_ENDPOINT_2 0x04
++#define USB_ENDPOINT_3 0x08
++#define USB_ENDPOINT_4 0x10
++#define USB_ENDPOINT_5 0x20
++#define USB_ENDPOINT_6 0x40
++#define USB_ENDPOINT_7 0x80
++ uint32 unused2;
++ byte conf_mem_ctl;
++#define USB_CONF_MEM_RD 0x80
++#define USB_CONF_MEM_RDY 0x40
++ byte unused2a;
++ byte conf_mem_read_address;
++ byte conf_mem_write_address;
++
++ byte unused3;
++ byte dev_req_bytesel;
++ uint16 ext_dev_data;
++
++ byte unused4;
++ byte clr_fifo;
++ byte endpt_stall_reset; // use same endpoint #'s from above
++ byte usb_cntl;
++#define USB_FORCE_ERR 0x20
++#define USB_SOFT_RESET 0x10
++#define USB_RESUME 0x08
++#define USB_COMMAND_ERR 0x04
++#define USB_COMMAND_OVER 0x02
++ byte irq_addr;
++ byte iso_out_in_addr;
++ byte blk_out_in_addr;
++ byte cntl_addr;
++ uint32 unusedx[2];
++ uint32 tx_ram_write_port;
++ uint32 fifo_status; // (see bcm6338 data sheet for definition)
++
++ uint32 irq_status;
++ uint32 irq_mask;
++#define USB_NEW_CONFIG 0x00000001
++#define USB_SETUP_COMMAND_RECV 0x00000002 // non-standard setup cmd rcvd
++#define USB_OUT_FIFO_OV 0x00000004
++#define USB_RESET_RECV 0x00000008
++#define USB_SUSPEND_RECV 0x00000010
++#define USB_FIFO_REWIND 0x00000020
++#define USB_RX_BULK_FIFO_DATA_AVAIL 0x00000040
++#define USB_RX_ISO_FIFO_DATA_AVAIL 0x00000080
++#define USB_LINK_CHANGE 0x00010000
++ uint32 endpt_cntl;
++#define USB_R_WK_EN 0x0100
++#define USB_TX_EOP 0x0200
++#define USB_TX_CNTL_DMA_EN 0x0400
++#define USB_TX_BULK_DMA_EN 0x0800
++#define USB_TX_ISO_DMA_EN 0x1000
++#define USB_RX_CNTL_DMA_EN 0x2000
++#define USB_RX_BULK_DMA_EN 0x4800
++#define USB_RX_ISO_DMA_EN 0x8000
++ uint32 rx_status_read_port;
++ uint32 confmem_read_port;
++ uint32 confmem_write_port;
++ uint32 fifo_ovf_count;
++ uint32 fifo_rewind_cnt;
++ uint32 terminal_count;
++} UsbRegisters;
++
++#define USB ((volatile UsbRegisters * const) USB_CTL_BASE)
++
++/*
++** ADSL core Registers
++*/
++
++#define _PADLINE(line) pad ## line
++#define _XSTR(line) _PADLINE(line)
++#define PAD _XSTR(__LINE__)
++
++typedef struct AdslRegisters {
++ uint32 core_control;
++#define ADSL_RESET 0x01
++
++ uint32 core_status;
++#define ADSL_HOST_MSG 0x01
++
++ uint32 PAD;
++ uint32 bist_status;
++ uint32 PAD[4];
++ uint32 int_status_i; /* 0x20 */
++ uint32 int_mask_i;
++ uint32 int_status_f;
++ uint32 int_mask_f;
++#define ADSL_INT_HOST_MSG 0x00000020
++#define ADSL_INT_DESC_ERR 0x00000400
++#define ADSL_INT_DATA_ERR 0x00000800
++#define ADSL_INT_DESC_PROTO_ERR 0x00001000
++#define ADSL_INT_RCV_DESC_UF 0x00002000
++#define ADSL_INT_RCV_FIFO_OF 0x00004000
++#define ADSL_INT_XMT_FIFO_UF 0x00008000
++#define ADSL_INT_RCV 0x00010000
++#define ADSL_INT_XMT 0x01000000
++
++ uint32 PAD[116];
++
++ uint32 xmtcontrol_intr; /* 0x200 */
++#define ADSL_DMA_XMT_EN 0x00000001
++#define ADSL_DMA_XMT_LE 0x00000004
++ uint32 xmtaddr_intr;
++#define ADSL_DMA_ADDR_MASK 0xFFFFF000
++ uint32 xmtptr_intr;
++#define ADSL_DMA_LAST_DESC_MASK 0x00000FFF
++ uint32 xmtstatus_intr;
++#define ADSL_DMA_CURR_DESC_MASK 0x00000FFF
++#define ADSL_DMA_XMT_STATE_MASK 0x0000F000
++#define ADSL_DMA_XMT_STATE_DIS 0x00000000
++#define ADSL_DMA_XMT_STATE_ACT 0x00001000
++#define ADSL_DMA_XMT_STATE_IDLE 0x00002000
++#define ADSL_DMA_XMT_STATE_STOP 0x00003000
++
++#define ADSL_DMA_XMT_ERR_MASK 0x000F0000
++#define ADSL_DMA_XMT_ERR_NONE 0x00000000
++#define ADSL_DMA_XMT_ERR_DPE 0x00010000
++#define ADSL_DMA_XMT_ERR_FIFO 0x00020000
++#define ADSL_DMA_XMT_ERR_DTE 0x00030000
++#define ADSL_DMA_XMT_ERR_DRE 0x00040000
++
++ uint32 rcvcontrol_intr;
++#define ADSL_DMA_RCV_EN 0x00000001
++#define ADSL_DMA_RCV_FO 0x000000FE
++ uint32 rcvaddr_intr;
++ uint32 rcvptr_intr;
++ uint32 rcvstatus_intr;
++#define ADSL_DMA_RCV_STATE_MASK 0x0000F000
++#define ADSL_DMA_RCV_STATE_DIS 0x00000000
++#define ADSL_DMA_RCV_STATE_ACT 0x00001000
++#define ADSL_DMA_RCV_STATE_IDLE 0x00002000
++#define ADSL_DMA_RCV_STATE_STOP 0x00003000
++
++#define ADSL_DMA_RCV_ERR_MASK 0x000F0000
++#define ADSL_DMA_RCV_ERR_NONE 0x00000000
++#define ADSL_DMA_RCV_ERR_DPE 0x00010000
++#define ADSL_DMA_RCV_ERR_FIFO 0x00020000
++#define ADSL_DMA_RCV_ERR_DTE 0x00030000
++#define ADSL_DMA_RCV_ERR_DRE 0x00040000
++
++ uint32 xmtcontrol_fast;
++ uint32 xmtaddr_fast;
++ uint32 xmtptr_fast;
++ uint32 xmtstatus_fast;
++ uint32 rcvcontrol_fast;
++ uint32 rcvaddr_fast;
++ uint32 rcvptr_fast;
++ uint32 rcvstatus_fast;
++ uint32 PAD[48];
++
++ uint32 host_message; /* 0x300 */
++ uint32 PAD[805];
++ uint32 core_reset;
++ uint32 core_error;
++ uint32 core_revision;
++
++#define ADSL_CORE_REV 0x0000000F
++#define ADSL_CORE_TYPE 0x0000FFF0
++} AdslRegisters;
++
++#define ADSL ((volatile AdslRegisters * const) ADSL_BASE)
++
++#if __cplusplus
++}
++#endif
++
++#endif
++
+diff -urN linux-2.6.8.1/bcmdrivers/broadcom/include/bcm963xx/6345_common.h linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/include/bcm963xx/6345_common.h
+--- linux-2.6.8.1/bcmdrivers/broadcom/include/bcm963xx/6345_common.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/include/bcm963xx/6345_common.h 2006-06-26 09:07:10.000000000 +0200
+@@ -0,0 +1,275 @@
++/*
++<:copyright-broadcom
++
++ Copyright (c) 2002 Broadcom Corporation
++ All Rights Reserved
++ No portions of this material may be reproduced in any form without the
++ written permission of:
++ Broadcom Corporation
++ 16215 Alton Parkway
++ Irvine, California 92619
++ All information contained in this document is Broadcom Corporation
++ company private, proprietary, and trade secret.
++
++:>
++*/
++/***********************************************************************/
++/* */
++/* MODULE: 6345_common.h */
++/* DATE: 96/12/19 */
++/* PURPOSE: Define addresses of major hardware components of */
++/* BCM6345 */
++/* */
++/***********************************************************************/
++#ifndef __BCM6345_MAP_COMMON_H
++#define __BCM6345_MAP_COMMON_H
++
++#if __cplusplus
++extern "C" {
++#endif
++
++/* matches isb_decoder.v */
++#define INTC_BASE 0xfffe0000 /* interrupts controller registers */
++#define BB_BASE 0xfffe0100 /* bus bridge registers */
++#define TIMR_BASE 0xfffe0200 /* timer registers */
++#define UART_BASE 0xfffe0300 /* uart registers */
++#define GPIO_BASE 0xfffe0400 /* gpio registers */
++#define EMAC_BASE 0xfffe1800 /* EMAC control registers */
++#define EBIC_BASE 0xfffe2000 /* EBI control registers */
++#define PCMCIA_BASE 0xfffe2028 /* PCMCIA control registers */
++#define USB_BASE 0xfffe2100 /* USB controll registers */
++#define SDRAM_BASE 0xfffe2300 /* SDRAM control registers */
++#define DMA_BASE 0xfffe2800 /* DMA control registers */
++
++/* DMA channel assignments */
++#define EMAC_RX_CHAN 1
++#define EMAC_TX_CHAN 2
++#define EBI_RX_CHAN 5
++#define EBI_TX_CHAN 6
++#define RESERVED_RX_CHAN 9
++#define RESERVED_TX_CHAN 10
++#define USB_BULK_RX_CHAN 13
++#define USB_BULK_TX_CHAN 14
++#define USB_ISO_RX_CHAN 15
++#define USB_ISO_TX_CHAN 16
++#define USB_CNTL_RX_CHAN 17
++#define USB_CNTL_TX_CHAN 18
++
++/*
++#-----------------------------------------------------------------------*
++# *
++#************************************************************************
++*/
++#define SDR_INIT_CTL 0x00
++ /* Control Bits */
++#define SDR_9BIT_COL (1<<11)
++#define SDR_32BIT (1<<10)
++#define SDR_PWR_DN (1<<9)
++#define SDR_SELF_REF (1<<8)
++#define SDR_SOFT_RST (1<<7)
++#define SDR_64x32 (3<<4)
++#define SDR_128MEG (2<<4)
++#define SDR_64MEG (1<<4)
++#define SDR_16MEG (0<<4)
++#define SDR_ENABLE (1<<3)
++#define SDR_MRS_CMD (1<<2)
++#define SDR_PRE_CMD (1<<1)
++#define SDR_CBR_CMD (1<<0)
++
++#define SDR_CFG_REG 0x04
++ /* Control Bits */
++#define SDR_FULL_PG 0x00
++#define SDR_BURST8 0x01
++#define SDR_BURST4 0x02
++#define SDR_BURST2 0x03
++#define SDR_FAST_MEM (1<<2)
++#define SDR_SLOW_MEM 0x00
++
++#define SDR_REF_CTL 0x08
++ /* Control Bits */
++#define SDR_REF_EN (1<<15)
++
++#define SDR_MEM_BASE 0x0c
++ /* Control Bits */
++#define DRAM2MBSPC 0x00000000
++#define DRAM8MBSPC 0x00000001
++#define DRAM16MBSPC 0x00000002
++#define DRAM32MBSPC 0x00000003
++#define DRAM64MBSPC 0x00000004
++
++#define DRAM2MEG 0x00000000 /* See SDRAM config */
++#define DRAM8MEG 0x00000001 /* See SDRAM config */
++#define DRAM16MEG 0x00000002 /* See SDRAM config */
++#define DRAM32MEG 0x00000003 /* See SDRAM config */
++#define DRAM64MEG 0x00000004 /* See SDRAM config */
++
++/*
++#-----------------------------------------------------------------------*
++# *
++#************************************************************************
++*/
++#define CS0BASE 0x00
++#define CS0CNTL 0x04
++#define CS1BASE 0x08
++#define CS1CNTL 0x0c
++#define CS2BASE 0x10
++#define CS2CNTL 0x14
++#define CS3BASE 0x18
++#define CS3CNTL 0x1c
++#define CS4BASE 0x20
++#define CS4CNTL 0x24
++#define CS5BASE 0x28
++#define CS5CNTL 0x2c
++#define CS6BASE 0x30
++#define CS6CNTL 0x34
++#define CS7BASE 0x38
++#define CS7CNTL 0x3c
++#define EBICONFIG 0x40
++
++/*
++# CSxBASE settings
++# Size in low 4 bits
++# Base Address for match in upper 24 bits
++*/
++#define EBI_SIZE_8K 0
++#define EBI_SIZE_16K 1
++#define EBI_SIZE_32K 2
++#define EBI_SIZE_64K 3
++#define EBI_SIZE_128K 4
++#define EBI_SIZE_256K 5
++#define EBI_SIZE_512K 6
++#define EBI_SIZE_1M 7
++#define EBI_SIZE_2M 8
++#define EBI_SIZE_4M 9
++#define EBI_SIZE_8M 10
++#define EBI_SIZE_16M 11
++#define EBI_SIZE_32M 12
++#define EBI_SIZE_64M 13
++#define EBI_SIZE_128M 14
++#define EBI_SIZE_256M 15
++
++/* CSxCNTL settings */
++#define EBI_ENABLE 0x00000001 /* .. enable this range */
++#define EBI_WAIT_STATES 0x0000000e /* .. mask for wait states */
++#define ZEROWT 0x00000000 /* .. 0 WS */
++#define ONEWT 0x00000002 /* .. 1 WS */
++#define TWOWT 0x00000004 /* .. 2 WS */
++#define THREEWT 0x00000006 /* .. 3 WS */
++#define FOURWT 0x00000008 /* .. 4 WS */
++#define FIVEWT 0x0000000a /* .. 5 WS */
++#define SIXWT 0x0000000c /* .. 6 WS */
++#define SEVENWT 0x0000000e /* .. 7 WS */
++#define EBI_WORD_WIDE 0x00000010 /* .. 16-bit peripheral, else 8 */
++#define EBI_POLARITY 0x00000040 /* .. set to invert chip select polarity */
++#define EBI_TS_TA_MODE 0x00000080 /* .. use TS/TA mode */
++#define EBI_TS_SEL 0x00000100 /* .. drive tsize, not bs_b */
++#define EBI_FIFO 0x00000200 /* .. enable fifo */
++#define EBI_RE 0x00000400 /* .. Reverse Endian */
++
++/* EBICONFIG settings */
++#define EBI_MASTER_ENABLE 0x80000000 /* allow external masters */
++#define EBI_EXT_MAST_PRIO 0x40000000 /* maximize ext master priority */
++#define EBI_CTRL_ENABLE 0x20000000
++#define EBI_TA_ENABLE 0x10000000
++
++#define BRGEN 0x80 /* Control register bit defs */
++#define TXEN 0x40
++#define RXEN 0x20
++#define LOOPBK 0x10
++#define TXPARITYEN 0x08
++#define TXPARITYEVEN 0x04
++#define RXPARITYEN 0x02
++#define RXPARITYEVEN 0x01
++#define XMITBREAK 0x40
++#define BITS5SYM 0x00
++#define BITS6SYM 0x10
++#define BITS7SYM 0x20
++#define BITS8SYM 0x30
++#define BAUD115200 0x0a
++#define ONESTOP 0x07
++#define TWOSTOP 0x0f
++#define TX4 0x40
++#define RX4 0x04
++#define RSTTXFIFOS 0x80
++#define RSTRXFIFOS 0x40
++#define DELTAIP 0x0001
++#define TXUNDERR 0x0002
++#define TXOVFERR 0x0004
++#define TXFIFOTHOLD 0x0008
++#define TXREADLATCH 0x0010
++#define TXFIFOEMT 0x0020
++#define RXUNDERR 0x0040
++#define RXOVFERR 0x0080
++#define RXTIMEOUT 0x0100
++#define RXFIFOFULL 0x0200
++#define RXFIFOTHOLD 0x0400
++#define RXFIFONE 0x0800
++#define RXFRAMERR 0x1000
++#define RXPARERR 0x2000
++#define RXBRK 0x4000
++
++#define RXIRQS 0x7fc0
++#define TXIRQS 0x003e
++
++#define CPU_CLK_EN 0x0001
++#define UART_CLK_EN 0x0008
++
++#define BLKEN 06
++
++#define FMSEL_MASK 0xf0000000 // 31:28
++#define FMSEL_SHFT 28
++#define FM_HI_GEAR 0x08000000 // 27
++#define FMCLKSEL 0x04000000 // 26
++#define FMDIV_MASK 0x03000000 // 25:24
++#define FMDIV_SHFT 24
++#define FBDIV_MASK 0x00f00000 // 23:20
++#define FBDIV_SHFT 20
++#define FB_SEL 0x00010000 // 16
++#define FU2SEL_MASK 0x0000f000 // 15:12
++#define FU2SEL_SHFT 12
++#define FU1SEL_MASK 0x00000f00 // 11:8
++#define FU1SEL_SHFT 8
++#define FU1PRS_MASK 0x000000e0 // 7:5
++#define FU1PRS_SHFT 5
++#define FU1POS_MASK 0x00000018 // 4:3
++#define FU1POS_SHFT 3
++#define SOFT_RESET 0x00000001
++
++#define FMSEL 0x08
++
++#define UART0CONTROL 0x01
++#define UART0CONFIG 0x02
++#define UART0RXTIMEOUT 0x03
++#define UART0BAUD 0x04
++#define UART0FIFOCFG 0x0a
++#define UART0INTMASK 0x10
++#define UART0INTSTAT 0x12
++#define UART0DATA 0x17
++
++#define GPIOTBUSSEL 0x03
++#define GPIODIR 0x06
++#define GPIOLED 0x09
++#define GPIOIO 0x0a
++#define GPIOUARTCTL 0x0c
++
++/*Defines below show which bit enables which UART signals */
++#define RI1_EN 0x0001
++#define CTS1_EN 0x0002
++#define DCD1_EN 0x0004
++#define DSR1_EN 0x0008
++#define DTR1_EN 0x0010
++#define RTS1_EN 0x0020
++#define DO1_EN 0x0040
++#define DI1_EN 0x0080
++#define RI0_EN 0x0100
++#define CTS0_EN 0x0200
++#define DCD0_EN 0x0400
++#define DSR0_EN 0x0800
++#define DTR0_EN 0x1000
++#define RTS0_EN 0x2000
++
++#if __cplusplus
++}
++#endif
++
++#endif
+diff -urN linux-2.6.8.1/bcmdrivers/broadcom/include/bcm963xx/6345_map.h linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/include/bcm963xx/6345_map.h
+--- linux-2.6.8.1/bcmdrivers/broadcom/include/bcm963xx/6345_map.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/include/bcm963xx/6345_map.h 2006-06-26 09:07:10.000000000 +0200
+@@ -0,0 +1,939 @@
++/*
++<:copyright-broadcom
++
++ Copyright (c) 2002 Broadcom Corporation
++ All Rights Reserved
++ No portions of this material may be reproduced in any form without the
++ written permission of:
++ Broadcom Corporation
++ 16215 Alton Parkway
++ Irvine, California 92619
++ All information contained in this document is Broadcom Corporation
++ company private, proprietary, and trade secret.
++
++:>
++*/
++/***********************************************************************/
++/* */
++/* MODULE: 6345_map.h */
++/* DATE: 96/12/19 */
++/* PURPOSE: Define addresses of major hardware components of */
++/* BCM6345 */
++/* */
++/***********************************************************************/
++#ifndef __BCM6345_MAP_H
++#define __BCM6345_MAP_H
++
++#if __cplusplus
++extern "C" {
++#endif
++
++#include "bcmtypes.h"
++#include "6345_common.h"
++#include "6345_intr.h"
++
++/* macro to convert logical data addresses to physical */
++/* DMA hardware must see physical address */
++#define LtoP( x ) ( (uint32)x & 0x1fffffff )
++#define PtoL( x ) ( LtoP(x) | 0xa0000000 )
++
++/*
++** Interrupt Controller
++*/
++typedef struct IntControl {
++ uint32 RevID; /* (00) */
++ uint16 testControl; /* (04) */
++ uint16 blkEnables; /* (06) */
++
++#define USB_CLK_EN 0x0100
++#define EMAC_CLK_EN 0x0080
++#define ADSL_CLK_EN 0x0010
++#define UART_CLK_EN 0x0008
++#define EBI_CLK_EN 0x0004
++#define BUS_CLK_EN 0x0002
++#define CPU_CLK_EN 0x0001
++
++ uint32 pll_control; /* (08) */
++#define FMSEL_MASK 0xf0000000 // 31:28
++#define FMSEL_SHFT 28
++#define FM_HI_GEAR 0x08000000 // 27
++#define FMCLKSEL 0x04000000 // 26
++#define FMDIV_MASK 0x03000000 // 25:24
++#define FMDIV_SHFT 24
++#define FBDIV_MASK 0x00f00000 // 23:20
++#define FBDIV_SHFT 20
++#define FB_SEL 0x00010000 // 16
++#define FU2SEL_MASK 0x0000f000 // 15:12
++#define FU2SEL_SHFT 12
++#define FU1SEL_MASK 0x00000f00 // 11:8
++#define FU1SEL_SHFT 8
++#define FU1PRS_MASK 0x000000e0 // 7:5
++#define FU1PRS_SHFT 5
++#define FU1POS_MASK 0x00000018 // 4:3
++#define FU1POS_SHFT 3
++#define SOFT_RESET 0x00000001
++
++ uint32 IrqMask; /* (0c) */
++ uint32 IrqStatus; /* (10) */
++
++ uint32 ExtIrqCfg;
++#define EI_SENSE_SHFT 0
++#define EI_STATUS_SHFT 4
++#define EI_CLEAR_SHFT 8
++#define EI_MASK_SHFT 12
++#define EI_INSENS_SHFT 16
++#define EI_LEVEL_SHFT 20
++} IntControl;
++
++#define PERF ((volatile IntControl * const) INTC_BASE)
++
++/*
++** Bus Bridge Registers
++*/
++typedef struct BusBridge {
++ uint16 status;
++#define BB_BUSY 0x8000 /* posted operation in progress */
++#define BB_RD_PND 0x4000 /* read pending */
++#define BB_RD_CMPLT 0x2000 /* read complete */
++#define BB_ERROR 0x1000 /* posted write error */
++#define BB_TEA 0x0800 /* transfer aborted */
++ uint16 abortTimeoutCnt; /* abort timeout value */
++
++ byte writePostEnable;
++#define BB_POST_TIMR_EN 0x08 /* post writes to timer regs */
++#define BB_POST_GPIO_EN 0x04 /* post writes to gpio regs */
++#define BB_POST_INTC_EN 0x02 /* post writes to interrupt controller regs */
++#define BB_POST_UART_EN 0x01 /* post writes to uart regs */
++ byte unused1[5];
++ uint16 postAddr; /* posted read address (lower half) */
++ byte unused2[3];
++ byte postData; /* posted read data */
++} BusBridge;
++
++/* register offsets (needed for EBI master access) */
++#define BB_STATUS 0
++#define BB_ABORT_TO_CNT 2
++#define BB_WR_POST_EN 4
++#define BB_RD_POST_ADDR 10
++#define BB_RD_POST_DATA 12
++
++#define BRIDGE *bridge ((volatile BusBridge * const) BB_BASE)
++
++/*
++** Timer
++*/
++typedef struct Timer {
++ uint16 unused0;
++ byte TimerMask;
++#define TIMER0EN 0x01
++#define TIMER1EN 0x02
++#define TIMER2EN 0x04
++ byte TimerInts;
++#define TIMER0 0x01
++#define TIMER1 0x02
++#define TIMER2 0x04
++#define WATCHDOG 0x08
++ uint32 TimerCtl0;
++ uint32 TimerCtl1;
++ uint32 TimerCtl2;
++#define TIMERENABLE 0x80000000
++#define RSTCNTCLR 0x40000000
++ uint32 TimerCnt0;
++ uint32 TimerCnt1;
++ uint32 TimerCnt2;
++ uint32 WatchDogDefCount;
++
++ /* Write 0xff00 0x00ff to Start timer
++ * Write 0xee00 0x00ee to Stop and re-load default count
++ * Read from this register returns current watch dog count
++ */
++ uint32 WatchDogCtl;
++
++ /* Number of 40-MHz ticks for WD Reset pulse to last */
++ uint32 WDResetCount;
++} Timer;
++
++#define TIMER ((volatile Timer * const) TIMR_BASE)
++
++/*
++** UART
++*/
++typedef struct UartChannel {
++ byte unused0;
++ byte control;
++#define BRGEN 0x80 /* Control register bit defs */
++#define TXEN 0x40
++#define RXEN 0x20
++#define LOOPBK 0x10
++#define TXPARITYEN 0x08
++#define TXPARITYEVEN 0x04
++#define RXPARITYEN 0x02
++#define RXPARITYEVEN 0x01
++
++ byte config;
++#define XMITBREAK 0x40
++#define BITS5SYM 0x00
++#define BITS6SYM 0x10
++#define BITS7SYM 0x20
++#define BITS8SYM 0x30
++#define ONESTOP 0x07
++#define TWOSTOP 0x0f
++ /* 4-LSBS represent STOP bits/char
++ * in 1/8 bit-time intervals. Zero
++ * represents 1/8 stop bit interval.
++ * Fifteen represents 2 stop bits.
++ */
++ byte fifoctl;
++#define RSTTXFIFOS 0x80
++#define RSTRXFIFOS 0x40
++ /* 5-bit TimeoutCnt is in low bits of this register.
++ * This count represents the number of characters
++ * idle times before setting receive Irq when below threshold
++ */
++ uint32 baudword;
++ /* When divide SysClk/2/(1+baudword) we should get 32*bit-rate
++ */
++
++ byte txf_levl; /* Read-only fifo depth */
++ byte rxf_levl; /* Read-only fifo depth */
++ byte fifocfg; /* Upper 4-bits are TxThresh, Lower are
++ * RxThreshold. Irq can be asserted
++ * when rx fifo> thresh, txfifo<thresh
++ */
++ byte prog_out; /* Set value of DTR (Bit0), RTS (Bit1)
++ * if these bits are also enabled to GPIO_o
++ */
++#define DTREN 0x01
++#define RTSEN 0x02
++
++ byte unused1;
++ byte DeltaIPEdgeNoSense; /* Low 4-bits, set corr bit to 1 to
++ * detect irq on rising AND falling
++ * edges for corresponding GPIO_i
++ * if enabled (edge insensitive)
++ */
++ byte DeltaIPConfig_Mask; /* Upper 4 bits: 1 for posedge sense
++ * 0 for negedge sense if
++ * not configured for edge
++ * insensitive (see above)
++ * Lower 4 bits: Mask to enable change
++ * detection IRQ for corresponding
++ * GPIO_i
++ */
++ byte DeltaIP_SyncIP; /* Upper 4 bits show which bits
++ * have changed (may set IRQ).
++ * read automatically clears bit
++ * Lower 4 bits are actual status
++ */
++
++ uint16 intMask; /* Same Bit defs for Mask and status */
++ uint16 intStatus;
++#define DELTAIP 0x0001
++#define TXUNDERR 0x0002
++#define TXOVFERR 0x0004
++#define TXFIFOTHOLD 0x0008
++#define TXREADLATCH 0x0010
++#define TXFIFOEMT 0x0020
++#define RXUNDERR 0x0040
++#define RXOVFERR 0x0080
++#define RXTIMEOUT 0x0100
++#define RXFIFOFULL 0x0200
++#define RXFIFOTHOLD 0x0400
++#define RXFIFONE 0x0800
++#define RXFRAMERR 0x1000
++#define RXPARERR 0x2000
++#define RXBRK 0x4000
++
++ uint16 unused2;
++ uint16 Data; /* Write to TX, Read from RX */
++ /* bits 11:8 are BRK,PAR,FRM errors */
++
++ uint32 unused3;
++ uint32 unused4;
++} Uart;
++
++#define UART ((volatile Uart * const) UART_BASE)
++
++/*
++** Gpio Controller
++*/
++typedef struct GpioControl {
++ uint16 unused0;
++ byte unused1;
++ byte TBusSel;
++
++ /* High in bit location enables output */
++ uint16 unused2;
++ uint16 GPIODir;
++ byte unused3;
++ byte Leds; //Only bits [3:0]
++ uint16 GPIOio;
++
++ /* Defines below show which bit enables which UART signals */
++ uint32 UartCtl;
++#define RI1_EN 0x0001
++#define CTS1_EN 0x0002
++#define DCD1_EN 0x0004
++#define DSR1_EN 0x0008
++#define DTR1_EN 0x0010
++#define RTS1_EN 0x0020
++#define DO1_EN 0x0040
++#define DI1_EN 0x0080
++#define RI0_EN 0x0100
++#define CTS0_EN 0x0200
++#define DCD0_EN 0x0400
++#define DSR0_EN 0x0800
++#define DTR0_EN 0x1000
++#define RTS0_EN 0x2000
++
++ /*********************************************************************
++ * Multiple Use Muxed GPIO
++ * -----------------------
++ *
++ * ------
++ * GPIO_A
++ * ------
++ *
++ * GPIO[0] -> RI1 I Controlled by UartCtl[0] ELSE 0
++ * GPIO[0] -> DMATC_i I Always
++ * GPIO[0] -> DMATC_o O Controlled by dma_enable_n|dma_drive_n
++ * GPIO[0] -> ebi_bsize[0] I Always
++ *
++ * GPIO[1] -> CTS1 I Controlled by UartCtl[1] ELSE 0
++ * GPIO[1] -> DMAACK1 (18) O Controlled by dma_enable_n
++ * GPIO[1] -> ebi_bg_b O Controlled by ebi_master_n
++ *
++ * GPIO[2] -> DCD1 I Controlled by UartCtl[2] ELSE 0
++ * GPIO[2] -> ebi_bsize[1] I Always
++ *
++ * GPIO[3] -> DSR1 I Controlled by UartCtl[3] ELSE 0
++ * GPIO[3] -> INT2 I Always
++ * GPIO[3] -> ebi_bsize[2] I Always
++ *
++ * GPIO[4] -> DTR1 O Controlled by UartCtl[4]&GpioDir[4]
++ * GPIO[4] -> INT3 I Always
++ * GPIO[4] -> ebi_burst I Always
++ *
++ * GPIO[5] -> RTS1 O Controlled by UartCtl[5]&GpioDir[5]
++ * GPIO[5] -> DMAACK0 (17) O Controlled by dma_enable_n
++ * GPIO[5] -> ebi_tsize I Always
++ *
++ * GPIO[6] -> sDout1 O Controlled by UartCtl[6]&GpioDir[6]
++ * GPIO[6] -> DMARQ1 (18) I Always
++ * GPIO[6] -> ebi_bb_i I Always
++ * GPIO[6] -> ebi_bb_o O Controlled by ebi_master_n|ebi_bb_oen
++ *
++ * GPIO[7] -> sDin1 I Controlled by UartCtl[7] ELSE 0
++ * GPIO[7] -> ebi_br_b I Always
++ * GPIO[7] -> DMARQ0 (17) I Always
++ *
++ * ------
++ * GPIO_B
++ * ------
++ *
++ * GPIO[8] -> RI0 I Controlled by UartCtl[8] ELSE 0
++ * GPIO[8] -> ebi_cs_b[6] O Controlled by ebi_cs_en[6]
++ *
++ * GPIO[9] -> CTS0 I Controlled by UartCtl[9] ELSE 0
++ *
++ * GPIO[a] -> DCD0 I Controlled by UartCtl[a] ELSE 0
++ * GPIO[a] -> ebi_cs_b[7] O Controlled by ebi_cs_en[7]
++ *
++ * GPIO[b] -> DSR0 I Controlled by UartCtl[b] ELSE 0
++ * GPIO[b] -> ebi_int_cs_b I Always
++ *
++ * GPIO[c] -> DTR0 O Controlled by UartCtl[c]&GpioDir[c]
++ *
++ * GPIO[d] -> RTS0 O Controlled by UartCtl[d]&&GpioDir[d]
++ *
++ * GPIO[e] -> INT0 I Always
++ *
++ * GPIO[f] -> INT1 I Always
++ *
++ * sDout0 -> (bist_en[15]) ? pll_clk48:sDout0_int
++ *
++ *********************************************************************/
++
++} GpioControl;
++
++#define GPIO ((volatile GpioControl * const) GPIO_BASE)
++
++#define GPIO_NUM_MAX_BITS_MASK 0x0f
++#define GPIO_NUM_TO_MASK(X) (1 << ((X) & GPIO_NUM_MAX_BITS_MASK))
++
++/*
++** DMA Channel (1 .. 20)
++*/
++typedef struct DmaChannel {
++ uint32 cfg; /* (00) assorted configuration */
++#define DMA_FLOWC_EN 0x00000010 /* flow control enable */
++#define DMA_WRAP_EN 0x00000008 /* use DMA_WRAP bit */
++#define DMA_CHAINING 0x00000004 /* chaining mode */
++#define DMA_STALL 0x00000002
++#define DMA_ENABLE 0x00000001 /* set to enable channel */
++ uint32 maxBurst; /* (04) max burst length permitted */
++ /* non-chaining / chaining */
++ uint32 startAddr; /* (08) source addr / ring start address */
++ uint32 length; /* (0c) xfer len / ring len */
++#define DMA_KICKOFF 0x80000000 /* start non-chaining xfer */
++
++ uint32 bufStat; /* (10) buffer status for non-chaining */
++ uint32 intStat; /* (14) interrupts control and status */
++ uint32 intMask; /* (18) interrupts mask */
++#define DMA_BUFF_DONE 0x00000001 /* buffer done */
++#define DMA_DONE 0x00000002 /* packet xfer complete */
++#define DMA_NO_DESC 0x00000004 /* no valid descriptors */
++
++// DMA HW bits are clugy in this version of chip (mask/status shifted)
++#define DMA_BUFF_DONE_MASK 0x00000004 /* buffer done */
++#define DMA_DONE_MASK 0x00000001 /* packet xfer complete */
++#define DMA_NO_DESC_MASK 0x00000002 /* no valid descriptors */
++
++ uint32 fcThreshold; /* (1c) flow control threshold */
++ uint32 numAlloc; /* */
++ uint32 unused[7]; /* (20-3c) pad to next descriptor */
++} DmaChannel;
++/* register offsets, useful for ebi master access */
++#define DMA_CFG 0
++#define DMA_MAX_BURST 4
++#define DMA_START_ADDR 8
++#define DMA_LENGTH 12
++#define DMA_BUF_STAT 16
++#define DMA_INT_STAT 20
++#define DMA_FC_THRESHOLD 24
++#define DMA_NUM_ALLOC 28
++
++
++/* paste in your program ...
++DmaChannel *dmaChannels = (DmaChannel *)DMA_BASE;
++DmaChannel *dma1 = dmaChannels[1];
++*/
++
++
++/*
++** DMA Buffer
++*/
++typedef struct DmaDesc {
++ uint16 length; /* in bytes of data in buffer */
++ uint16 status; /* buffer status */
++#define DMA_OWN 0x8000 /* cleared by DMA, set by SW */
++#define DMA_EOP 0x0800 /* last buffer in packet */
++#define DMA_SOP 0x0400 /* first buffer in packet */
++#define DMA_WRAP 0x0200 /* */
++#define DMA_APPEND_CRC 0x0100 /* .. for emac tx */
++#define DATA_FLAG 0x0100 /* .. for secmod rx */
++#define AUTH_FAIL_FLAG 0x0100 /* .. for secmod tx */
++
++/* EMAC Descriptor Status definitions */
++#define EMAC_UNDERRUN 0x4000 /* Tx underrun, dg-mod ???) */
++#define EMAC_MISS 0x0080 /* framed address recognition failed (promiscuous) */
++#define EMAC_BRDCAST 0x0040 /* DA is Broadcast */
++#define EMAC_MULT 0x0020 /* DA is multicast */
++#define EMAC_LG 0x0010 /* frame length > RX_LENGTH register value */
++#define EMAC_NO 0x0008 /* Non-Octet aligned */
++#define EMAC_RXER 0x0004 /* RX_ERR on MII while RX_DV assereted */
++#define EMAC_CRC_ERROR 0x0002 /* CRC error */
++#define EMAC_OV 0x0001 /* Overflow */
++
++/* HDLC Descriptor Status definitions */
++#define DMA_HDLC_TX_ABORT 0x0100
++#define DMA_HDLC_RX_OVERRUN 0x4000
++#define DMA_HDLC_RX_TOO_LONG 0x2000
++#define DMA_HDLC_RX_CRC_OK 0x1000
++#define DMA_HDLC_RX_ABORT 0x0100
++
++ uint32 address; /* address of data */
++} DmaDesc;
++
++/*
++** Sdram Controller
++*/
++typedef struct SdramControllerRegs {
++ uint16 unused1;
++ uint16 initControl; /* 02 */
++#define SD_POWER_DOWN 0x200 /* put sdram into power down */
++#define SD_SELF_REFRESH 0x100 /* enable self refresh mode */
++#define SD_SOFT_RESET 0x080 /* soft reset all sdram controller regs */
++#define SD_EDO_SELECT 0x040 /* select EDO mode */
++#define SD_EDO_WAIT_STATE 0x020 /* add an EDO wait state */
++#define SD_8MEG 0x010 /* map sdram to 8 megs */
++#define SD_MASTER_ENABLE 0x008 /* enable accesses to external sdram */
++#define SD_MRS 0x004 /* generate a mode register select cycle */
++#define SD_PRECHARGE 0x002 /* generate a precharge cycle */
++#define SD_CBR 0x001 /* generate a refresh cycle */
++ uint8 unused2[3];
++ uint8 config; /* 07 */
++#define SD_FAST_MEM 0x04 /* 1=CAS latency of 2, 0 = CAS latency of 3 */
++#define SD_BURST_LEN 0x03 /* set burst length */
++#define SD_BURST_FULL_PAGE 0x00 /* .. full page */
++#define SD_BURST_8 0x01 /* .. 8 words */
++#define SD_BURST_4 0x02 /* .. 4 words */
++#define SD_BURST_2 0x03 /* .. 2 words */
++ uint16 unused3;
++ uint16 refreshControl; /* 0a */
++#define SD_REFRESH_ENABLE 0x8000 /* refresh enable */
++#define SD_REFRESH_PERIOD 0x00ff /* refresh period (16 x n x clock_period) */
++
++ uint32 memoryBase; /* 0c */
++#define SD_MEMBASE_MASK 0xffffe000 /* base address mask */
++#define SD_MEMSIZE_8MEG 0x00000001 /* memory is 8 meg */
++#define SD_MEMSIZE_2MEG 0x00000001 /* memory is 2 meg */
++
++} SdramControllerRegs;
++
++/*
++** External Bus Interface
++*/
++typedef struct EbiChipSelect {
++ uint32 base; /* base address in upper 24 bits */
++#define EBI_SIZE_8K 0
++#define EBI_SIZE_16K 1
++#define EBI_SIZE_32K 2
++#define EBI_SIZE_64K 3
++#define EBI_SIZE_128K 4
++#define EBI_SIZE_256K 5
++#define EBI_SIZE_512K 6
++#define EBI_SIZE_1M 7
++#define EBI_SIZE_2M 8
++#define EBI_SIZE_4M 9
++#define EBI_SIZE_8M 10
++#define EBI_SIZE_16M 11
++#define EBI_SIZE_32M 12
++#define EBI_SIZE_64M 13
++#define EBI_SIZE_128M 14
++#define EBI_SIZE_256M 15
++ uint32 config;
++#define EBI_ENABLE 0x00000001 /* .. enable this range */
++#define EBI_WAIT_STATES 0x0000000e /* .. mask for wait states */
++#define EBI_WTST_SHIFT 1 /* .. for shifting wait states */
++#define EBI_WORD_WIDE 0x00000010 /* .. 16-bit peripheral, else 8 */
++#define EBI_WREN 0x00000020 /* enable posted writes */
++#define EBI_POLARITY 0x00000040 /* .. set to invert something,
++ ** don't know what yet */
++#define EBI_TS_TA_MODE 0x00000080 /* .. use TS/TA mode */
++#define EBI_TS_SEL 0x00000100 /* .. drive tsize, not bs_b */
++#define EBI_FIFO 0x00000200 /* .. use fifo */
++#define EBI_RE 0x00000400 /* .. Reverse Endian */
++} EbiChipSelect;
++
++typedef struct EbiRegisters {
++ EbiChipSelect cs[5]; /* size chip select configuration */
++ uint32 reserved[6];
++ uint32 ebi_config; /* configuration */
++#define EBI_MASTER_ENABLE 0x80000000 /* allow external masters */
++#define EBI_EXT_MAST_PRIO 0x40000000 /* maximize ext master priority */
++#define EBI_CTRL_ENABLE 0x20000000
++#define EBI_TA_ENABLE 0x10000000
++ uint32 dma_control;
++#define EBI_TX_INV_IRQ_EN 0x00080000
++#define EBI_RX_INV_IRQ_EN 0x00040000
++#define EBI_TX_PKT_DN_IRQ_EN 0x00020000
++#define EBI_RX_PKT_DN_IRQ_EN 0x00010000
++#define EBI_TX_INV_CLR 0x00001000
++#define EBI_RX_INV_CLR 0x00000800
++#define EBI_CHAINING 0x00000400
++#define EBI_EXT_MODE 0x00000200
++#define EBI_HALF_WORD 0x00000100
++#define EBI_TX_PKT_DN_CLR 0x00000080
++#define EBI_RX_PKT_DN_CLR 0x00000040
++#define EBI_TX_BUF_DN_CLR 0x00000020
++#define EBI_RX_BUF_DN_CLR 0x00000010
++#define EBI_TX_BUF_DN_IRQ_EN 0x00000008
++#define EBI_RX_BUF_DN_IRQ_EN 0x00000004
++#define EBI_TX_EN 0x00000002
++#define EBI_RX_EN 0x00000001
++ uint32 dma_rx_start_addr;
++ uint32 dma_rx_buf_size;
++ uint32 dma_tx_start_addr;
++ uint32 dma_tx_buf_size;
++ uint32 dma_status;
++#define EBI_TX_INV_DESC 0x00000020
++#define EBI_RX_INV_DESC 0x00000010
++#define EBI_TX_PKT_DN 0x00000008
++#define EBI_RX_PKT_DN 0x00000004
++#define EBI_TX_BUF_DN 0x00000002
++#define EBI_RX_BUF_DN 0x00000001
++} EbiRegisters;
++
++#define EBIC ((volatile EbiRegisters * const) EBIC_BASE)
++
++typedef struct PcmciaRegisters {
++ /*Each of base has 24 bits of base address followed by size select field*/
++ uint32 mem_base;
++ uint32 mem_cntrl;
++ uint32 attr_base;
++ uint32 attr_cntrl;
++ uint32 io_base;
++ uint32 io_cntrl;
++#define PCMCIA_CS_ENABLE 0x00000001
++#define PCMCIA_CS_FIFO_ENABLE 0x00000200
++#define PCMCIA_DSTSIZE_16 0x00000010 // 0 -8bit, 1- 16bit
++#define PCMCIA_RENDIAN 0x00000400
++ /* Skip ECR and EBI-DMA registers */
++ uint32 other1[7];
++
++ byte mem_waitcnt4; // Only bits [5:0]
++ byte mem_waitcnt3; // Only bits [4:0]
++ byte mem_waitcnt2; // Only bits [4:0]
++ byte mem_waitcnt1; // Only bits [4:0]
++
++ byte attr_waitcnt4; // Only bits [5:0]
++ byte attr_waitcnt3; // Only bits [4:0]
++ byte attr_waitcnt2; // Only bits [4:0]
++ byte attr_waitcnt1; // Only bits [4:0]
++
++ byte io_waitcnt4; // Only bits [5:0]
++ byte io_waitcnt3; // Only bits [4:0]
++ byte io_waitcnt2; // Only bits [4:0]
++ byte io_waitcnt1; // Only bits [4:0]
++
++} PcmciaRegisters;
++
++#define PCMCIA ((volatile PcmciaRegisters * const) PCMCIA_BASE)
++
++/*
++** EMAC transmit MIB counters
++*/
++typedef struct EmacTxMib {
++ uint32 tx_good_octets; /* (200) good byte count */
++ uint32 tx_good_pkts; /* (204) good pkt count */
++ uint32 tx_octets; /* (208) good and bad byte count */
++ uint32 tx_pkts; /* (20c) good and bad pkt count */
++ uint32 tx_broadcasts_pkts; /* (210) good broadcast packets */
++ uint32 tx_multicasts_pkts; /* (214) good mulitcast packets */
++ uint32 tx_len_64; /* (218) RMON tx pkt size buckets */
++ uint32 tx_len_65_to_127; /* (21c) */
++ uint32 tx_len_128_to_255; /* (220) */
++ uint32 tx_len_256_to_511; /* (224) */
++ uint32 tx_len_512_to_1023; /* (228) */
++ uint32 tx_len_1024_to_max; /* (22c) */
++ uint32 tx_jabber_pkts; /* (230) > 1518 with bad crc */
++ uint32 tx_oversize_pkts; /* (234) > 1518 with good crc */
++ uint32 tx_fragment_pkts; /* (238) < 63 with bad crc */
++ uint32 tx_underruns; /* (23c) fifo underrun */
++ uint32 tx_total_cols; /* (240) total collisions in all tx pkts */
++ uint32 tx_single_cols; /* (244) tx pkts with single collisions */
++ uint32 tx_multiple_cols; /* (248) tx pkts with multiple collisions */
++ uint32 tx_excessive_cols; /* (24c) tx pkts with excessive cols */
++ uint32 tx_late_cols; /* (250) tx pkts with late cols */
++ uint32 tx_defered; /* (254) tx pkts deferred */
++ uint32 tx_carrier_lost; /* (258) tx pkts with CRS lost */
++ uint32 tx_pause_pkts; /* (25c) tx pause pkts sent */
++#define NumEmacTxMibVars 24
++} EmacTxMib;
++
++/*
++** EMAC receive MIB counters
++*/
++typedef struct EmacRxMib {
++ uint32 rx_good_octets; /* (280) good byte count */
++ uint32 rx_good_pkts; /* (284) good pkt count */
++ uint32 rx_octets; /* (288) good and bad byte count */
++ uint32 rx_pkts; /* (28c) good and bad pkt count */
++ uint32 rx_broadcasts_pkts; /* (290) good broadcast packets */
++ uint32 rx_multicasts_pkts; /* (294) good mulitcast packets */
++ uint32 rx_len_64; /* (298) RMON rx pkt size buckets */
++ uint32 rx_len_65_to_127; /* (29c) */
++ uint32 rx_len_128_to_255; /* (2a0) */
++ uint32 rx_len_256_to_511; /* (2a4) */
++ uint32 rx_len_512_to_1023; /* (2a8) */
++ uint32 rx_len_1024_to_max; /* (2ac) */
++ uint32 rx_jabber_pkts; /* (2b0) > 1518 with bad crc */
++ uint32 rx_oversize_pkts; /* (2b4) > 1518 with good crc */
++ uint32 rx_fragment_pkts; /* (2b8) < 63 with bad crc */
++ uint32 rx_missed_pkts; /* (2bc) missed packets */
++ uint32 rx_crc_align_errs; /* (2c0) both or either */
++ uint32 rx_undersize; /* (2c4) < 63 with good crc */
++ uint32 rx_crc_errs; /* (2c8) crc errors (only) */
++ uint32 rx_align_errs; /* (2cc) alignment errors (only) */
++ uint32 rx_symbol_errs; /* (2d0) pkts with RXERR assertions (symbol errs) */
++ uint32 rx_pause_pkts; /* (2d4) MAC control, PAUSE */
++ uint32 rx_nonpause_pkts; /* (2d8) MAC control, not PAUSE */
++#define NumEmacRxMibVars 23
++} EmacRxMib;
++
++typedef struct EmacRegisters {
++ uint32 rxControl; /* (00) receive control */
++#define EMAC_PM_REJ 0x80 /* - reject DA match in PMx regs */
++#define EMAC_UNIFLOW 0x40 /* - accept cam match fc */
++#define EMAC_FC_EN 0x20 /* - enable flow control */
++#define EMAC_LOOPBACK 0x10 /* - loopback */
++#define EMAC_PROM 0x08 /* - promiscuous */
++#define EMAC_RDT 0x04 /* - ignore transmissions */
++#define EMAC_ALL_MCAST 0x02 /* - ignore transmissions */
++#define EMAC_NO_BCAST 0x01 /* - ignore transmissions */
++
++
++ uint32 rxMaxLength; /* (04) receive max length */
++ uint32 txMaxLength; /* (08) transmit max length */
++ uint32 unused1[1];
++ uint32 mdioFreq; /* (10) mdio frequency */
++#define EMAC_MII_PRE_EN 0x0100 /* prepend preamble sequence */
++#define EMAC_MDIO_PRE 0x100 /* - enable MDIO preamble */
++#define EMAC_MDC_FREQ 0x0ff /* - mdio frequency */
++
++ uint32 mdioData; /* (14) mdio data */
++#define MDIO_WR 0x50020000 /* - write framing */
++#define MDIO_RD 0x60020000 /* - read framing */
++#define MDIO_PMD_SHIFT 23
++#define MDIO_REG_SHIFT 18
++
++ uint32 intMask; /* (18) int mask */
++ uint32 intStatus; /* (1c) int status */
++#define EMAC_FLOW_INT 0x04 /* - flow control event */
++#define EMAC_MIB_INT 0x02 /* - mib event */
++#define EMAC_MDIO_INT 0x01 /* - mdio event */
++
++ uint32 unused2[3];
++ uint32 config; /* (2c) config */
++#define EMAC_ENABLE 0x001 /* - enable emac */
++#define EMAC_DISABLE 0x002 /* - disable emac */
++#define EMAC_SOFT_RST 0x004 /* - soft reset */
++#define EMAC_SOFT_RESET 0x004 /* - emac soft reset */
++#define EMAC_EXT_PHY 0x008 /* - external PHY select */
++
++ uint32 txControl; /* (30) transmit control */
++#define EMAC_FD 0x001 /* - full duplex */
++#define EMAC_FLOWMODE 0x002 /* - flow mode */
++#define EMAC_NOBKOFF 0x004 /* - no backoff in */
++#define EMAC_SMALLSLT 0x008 /* - small slot time */
++
++ uint32 txThreshold; /* (34) transmit threshold */
++ uint32 mibControl; /* (38) mib control */
++#define EMAC_NO_CLEAR 0x001 /* don't clear on read */
++
++ uint32 unused3[7];
++
++ uint32 pm0DataLo; /* (58) perfect match 0 data lo */
++ uint32 pm0DataHi; /* (5C) perfect match 0 data hi (15:0) */
++ uint32 pm1DataLo; /* (60) perfect match 1 data lo */
++ uint32 pm1DataHi; /* (64) perfect match 1 data hi (15:0) */
++ uint32 pm2DataLo; /* (68) perfect match 2 data lo */
++ uint32 pm2DataHi; /* (6C) perfect match 2 data hi (15:0) */
++ uint32 pm3DataLo; /* (70) perfect match 3 data lo */
++ uint32 pm3DataHi; /* (74) perfect match 3 data hi (15:0) */
++#define EMAC_CAM_V 0x10000 /* - cam index */
++#define EMAC_CAM_VALID 0x00010000
++
++ uint32 unused4[98]; /* (78-1fc) */
++
++ EmacTxMib tx_mib; /* (200) emac tx mib */
++ uint32 unused5[8]; /* (260-27c) */
++
++ EmacRxMib rx_mib; /* (280) rx mib */
++
++} EmacRegisters;
++
++/* register offsets for subrouting access */
++#define EMAC_RX_CONTROL 0x00
++#define EMAC_RX_MAX_LENGTH 0x04
++#define EMAC_TX_MAC_LENGTH 0x08
++#define EMAC_MDIO_FREQ 0x10
++#define EMAC_MDIO_DATA 0x14
++#define EMAC_INT_MASK 0x18
++#define EMAC_INT_STATUS 0x1C
++#define EMAC_CAM_DATA_LO 0x20
++#define EMAC_CAM_DATA_HI 0x24
++#define EMAC_CAM_CONTROL 0x28
++#define EMAC_CONTROL 0x2C
++#define EMAC_TX_CONTROL 0x30
++#define EMAC_TX_THRESHOLD 0x34
++#define EMAC_MIB_CONTROL 0x38
++
++
++#define EMAC ((volatile EmacRegisters * const) EMAC_BASE)
++
++/*
++** USB Registers
++*/
++typedef struct UsbRegisters {
++ byte inttf_setting;
++ byte current_config;
++ uint16 status_frameNum;
++#define USB_BUS_RESET 0x1000
++#define USB_SUSPENDED 0x0800
++ byte unused1;
++ byte endpt_prnt;
++ byte endpt_dirn;
++ byte endpt_status;
++#define USB_ENDPOINT_0 0x01
++#define USB_ENDPOINT_1 0x02
++#define USB_ENDPOINT_2 0x04
++#define USB_ENDPOINT_3 0x08
++#define USB_ENDPOINT_4 0x10
++#define USB_ENDPOINT_5 0x20
++#define USB_ENDPOINT_6 0x40
++#define USB_ENDPOINT_7 0x80
++ uint32 unused2;
++ byte conf_mem_ctl;
++#define USB_CONF_MEM_RD 0x80
++#define USB_CONF_MEM_RDY 0x40
++ byte unused2a;
++ byte conf_mem_read_address;
++ byte conf_mem_write_address;
++
++ byte unused3;
++ byte dev_req_bytesel;
++ uint16 ext_dev_data;
++
++ byte unused4;
++ byte clr_fifo;
++ byte endpt_stall_reset; // use same endpoint #'s from above
++ byte usb_cntl;
++#define USB_FORCE_ERR 0x20
++#define USB_SOFT_RESET 0x10
++#define USB_RESUME 0x08
++#define USB_COMMAND_ERR 0x04
++#define USB_COMMAND_OVER 0x02
++ byte irq_addr;
++ byte iso_out_in_addr;
++ byte blk_out_in_addr;
++ byte cntl_addr;
++ uint32 mux_cntl;
++#define USB_TX_DMA_OPER 0x00000000
++#define USB_TX_CNTL_FIFO_OPER 0x00000004
++#define USB_TX_BULK_FIFO_OPER 0x00000008
++#define USB_TX_ISO_FIFO_OPER 0x0000000c
++#define USB_TX_IRQ_OPER 0x00000010
++#define USB_RX_DMA_OPER 0x00000000
++#define USB_RX_CNTL_FIFO_OPER 0x00000001
++#define USB_RX_BULK_FIFO_OPER 0x00000002
++#define USB_RX_ISO_FIFO_OPER 0x00000003
++ uint32 rx_ram_read_port;
++ uint32 tx_ram_write_port;
++ uint32 fifo_status;
++#define USB_CTRLI_FIFO_FULL 0x00000001
++#define USB_CTRLI_FIFO_EMPTY 0x00000002
++#define USB_CTRLO_FIFO_FULL 0x00000100
++#define USB_CTRLO_FIFO_EMPTY 0x00000200
++ uint32 irq_status;
++ uint32 irq_mask;
++#define USB_NEW_CONFIG 0x01
++#define USB_SETUP_COMMAND_RECV 0x02 // non-standard setup command received
++#define USB_OUT_FIFO_OV 0x04
++#define USB_RESET_RECV 0x08
++#define USB_SUSPEND_RECV 0x10
++#define USB_FIFO_REWIND 0x20
++#define USB_RX_BULK_FIFO_DATA_AVAIL 0x40
++#define USB_RX_ISO_FIFO_DATA_AVAIL 0x80
++ uint32 endpt_cntl;
++#define USB_R_WK_EN 0x0100
++#define USB_TX_EOP 0x0200
++#define USB_TX_CNTL_DMA_EN 0x0400
++#define USB_TX_BULK_DMA_EN 0x0800
++#define USB_TX_ISO_DMA_EN 0x1000
++#define USB_RX_CNTL_DMA_EN 0x2000
++#define USB_RX_BULK_DMA_EN 0x4800
++#define USB_RX_ISO_DMA_EN 0x8000
++ uint32 rx_status_read_port;
++ uint32 confmem_read_port;
++ uint32 confmem_write_port;
++ uint32 fifo_ovf_count;
++ uint32 fifo_rewind_cnt;
++} UsbRegisters;
++
++#define USB ((volatile UsbRegisters * const) USB_BASE)
++
++/*
++** ADSL core Registers
++*/
++
++#define _PADLINE(line) pad ## line
++#define _XSTR(line) _PADLINE(line)
++#define PAD _XSTR(__LINE__)
++
++typedef struct AdslRegisters {
++ uint32 core_control;
++#define ADSL_RESET 0x01
++
++ uint32 core_status;
++#define ADSL_HOST_MSG 0x01
++
++ uint32 PAD;
++ uint32 bist_status;
++ uint32 PAD[4];
++ uint32 int_status_i; /* 0x20 */
++ uint32 int_mask_i;
++ uint32 int_status_f;
++ uint32 int_mask_f;
++#define ADSL_INT_HOST_MSG 0x00000020
++#define ADSL_INT_DESC_ERR 0x00000400
++#define ADSL_INT_DATA_ERR 0x00000800
++#define ADSL_INT_DESC_PROTO_ERR 0x00001000
++#define ADSL_INT_RCV_DESC_UF 0x00002000
++#define ADSL_INT_RCV_FIFO_OF 0x00004000
++#define ADSL_INT_XMT_FIFO_UF 0x00008000
++#define ADSL_INT_RCV 0x00010000
++#define ADSL_INT_XMT 0x01000000
++
++ uint32 PAD[116];
++
++ uint32 xmtcontrol_intr; /* 0x200 */
++#define ADSL_DMA_XMT_EN 0x00000001
++#define ADSL_DMA_XMT_LE 0x00000004
++ uint32 xmtaddr_intr;
++#define ADSL_DMA_ADDR_MASK 0xFFFFF000
++ uint32 xmtptr_intr;
++#define ADSL_DMA_LAST_DESC_MASK 0x00000FFF
++ uint32 xmtstatus_intr;
++#define ADSL_DMA_CURR_DESC_MASK 0x00000FFF
++#define ADSL_DMA_XMT_STATE_MASK 0x0000F000
++#define ADSL_DMA_XMT_STATE_DIS 0x00000000
++#define ADSL_DMA_XMT_STATE_ACT 0x00001000
++#define ADSL_DMA_XMT_STATE_IDLE 0x00002000
++#define ADSL_DMA_XMT_STATE_STOP 0x00003000
++
++#define ADSL_DMA_XMT_ERR_MASK 0x000F0000
++#define ADSL_DMA_XMT_ERR_NONE 0x00000000
++#define ADSL_DMA_XMT_ERR_DPE 0x00010000
++#define ADSL_DMA_XMT_ERR_FIFO 0x00020000
++#define ADSL_DMA_XMT_ERR_DTE 0x00030000
++#define ADSL_DMA_XMT_ERR_DRE 0x00040000
++
++ uint32 rcvcontrol_intr;
++#define ADSL_DMA_RCV_EN 0x00000001
++#define ADSL_DMA_RCV_FO 0x000000FE
++ uint32 rcvaddr_intr;
++ uint32 rcvptr_intr;
++ uint32 rcvstatus_intr;
++#define ADSL_DMA_RCV_STATE_MASK 0x0000F000
++#define ADSL_DMA_RCV_STATE_DIS 0x00000000
++#define ADSL_DMA_RCV_STATE_ACT 0x00001000
++#define ADSL_DMA_RCV_STATE_IDLE 0x00002000
++#define ADSL_DMA_RCV_STATE_STOP 0x00003000
++
++#define ADSL_DMA_RCV_ERR_MASK 0x000F0000
++#define ADSL_DMA_RCV_ERR_NONE 0x00000000
++#define ADSL_DMA_RCV_ERR_DPE 0x00010000
++#define ADSL_DMA_RCV_ERR_FIFO 0x00020000
++#define ADSL_DMA_RCV_ERR_DTE 0x00030000
++#define ADSL_DMA_RCV_ERR_DRE 0x00040000
++
++ uint32 xmtcontrol_fast;
++ uint32 xmtaddr_fast;
++ uint32 xmtptr_fast;
++ uint32 xmtstatus_fast;
++ uint32 rcvcontrol_fast;
++ uint32 rcvaddr_fast;
++ uint32 rcvptr_fast;
++ uint32 rcvstatus_fast;
++ uint32 PAD[48];
++
++ uint32 host_message; /* 0x300 */
++ uint32 PAD[805];
++ uint32 core_reset;
++ uint32 core_error;
++ uint32 core_revision;
++
++#define ADSL_CORE_REV 0x0000000F
++#define ADSL_CORE_TYPE 0x0000FFF0
++} AdslRegisters;
++
++#define ADSL ((volatile AdslRegisters * const) ADSL_BASE)
++
++#if __cplusplus
++}
++#endif
++
++#endif
++
+diff -urN linux-2.6.8.1/bcmdrivers/broadcom/include/bcm963xx/6348_common.h linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/include/bcm963xx/6348_common.h
+--- linux-2.6.8.1/bcmdrivers/broadcom/include/bcm963xx/6348_common.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/include/bcm963xx/6348_common.h 2006-06-26 09:07:10.000000000 +0200
+@@ -0,0 +1,225 @@
++/*
++<:copyright-broadcom
++
++ Copyright (c) 2002 Broadcom Corporation
++ All Rights Reserved
++ No portions of this material may be reproduced in any form without the
++ written permission of:
++ Broadcom Corporation
++ 16215 Alton Parkway
++ Irvine, California 92619
++ All information contained in this document is Broadcom Corporation
++ company private, proprietary, and trade secret.
++
++:>
++*/
++/***********************************************************************/
++/* */
++/* MODULE: 6348_common.h */
++/* DATE: 04/12/19 */
++/* PURPOSE: Define addresses of major hardware components of */
++/* BCM6348 */
++/* */
++/***********************************************************************/
++#ifndef __BCM6348_MAP_COMMON_H
++#define __BCM6348_MAP_COMMON_H
++
++#if __cplusplus
++extern "C" {
++#endif
++
++#define PERF_BASE 0xfffe0000 /* chip control registers */
++#define BB_BASE 0xfffe0100 /* bus bridge registers */
++#define TIMR_BASE 0xfffe0200 /* timer registers */
++#define UART_BASE 0xfffe0300 /* uart registers */
++#define GPIO_BASE 0xfffe0400 /* gpio registers */
++#define SPI_BASE 0xfffe0c00 /* SPI master controller registers */
++
++#define USB_CTL_BASE 0xfffe1000 /* USB control registers */
++#define USB_DMA_BASE 0xfffe1400 /* USB DMA control registers */
++#define USB_HOST_BASE 0xfffe1b00 /* USB host registers */
++
++#define MPI_BASE 0xfffe2000 /* MPI control registers */
++#define SDRAM_BASE 0xfffe2300 /* SDRAM control registers */
++
++#define ADSL_BASE 0xfffe3000 /* ADSL core control registers */
++#define ATM_BASE 0xfffe4000 /* ATM SAR control registers */
++#define UBUS_BASE 0xfffe5000 /* UBUS status registers */
++#define EMAC1_BASE 0xfffe6000 /* EMAC1 control registers */
++#define EMAC2_BASE 0xfffe6800 /* EMAC2 control registers */
++#define EMAC_DMA_BASE 0xfffe7000 /* EMAC DMA control registers */
++
++/*
++#####################################################################
++# System PLL Control Register
++#####################################################################
++*/
++#define SYSPLLCFG 0x08
++
++#define M_MPI_MASK 0x00000018 // 4:3
++#define M_MPI_SHFT 3
++#define M_MPI_50MHZ 0
++#define M_MPI_40MHZ 1
++#define M_MPI_33MHZ 2
++#define M_MPI_25MHZ 3
++
++#define M_UTO_MASK 0x00000002 // 1:1
++#define M_UTO_SHFT 1
++
++#define SOFT_RESET 0x00000001
++
++#define PLL_STRAP_VALUE 0x34
++
++/*
++#####################################################################
++# SDRAM Control Registers
++#####################################################################
++*/
++#define SDR_INIT_CTL 0x00
++ /* Control Bits */
++#define SDR_PFEN1 (1<<16)
++#define SDR_PFEN0 (1<<15)
++#define SDR_EMPRS (1<<14)
++#define SDR_2_BANKS (1<<13)
++#define SDR_1_BANK (0<<13)
++#define SDR_CS1_EN (1<<12)
++#define SDR_PEND (1<<11)
++#define SDR_32_BIT (1<<10)
++#define SDR_POWER_DOWN (1<<9)
++#define SDR_SELF_REFRESH (1<<8)
++#define SDR_11_COLS (3<<6)
++#define SDR_10_COLS (2<<6)
++#define SDR_9_COLS (1<<6)
++#define SDR_8_COLS (0<<6)
++#define SDR_13_ROWS (2<<4)
++#define SDR_12_ROWS (1<<4)
++#define SDR_11_ROWS (0<<4)
++#define SDR_MASTER_EN (1<<3)
++#define SDR_MRS_CMD (1<<2)
++#define SDR_PRE_CMD (1<<1)
++#define SDR_CBR_CMD (1<<0)
++
++#define SDR_CFG_REG 0x04
++ /* Control Bits */
++#define SDR_FULL_PG 0
++#define SDR_BURST8 1
++#define SDR_BURST4 2
++#define SDR_BURST2 3
++#define SDR_FAST_MEM (1<<2)
++#define SDR_SLOW_MEM (0<<2)
++
++#define SDR_REF_CTL 0x0C
++ /* Control Bits */
++#define SDR_REF_EN (1<<15)
++
++#define SDR_PRIOR
++ /* Control Bits */
++#define SDR_EN_PRIOR (1<<31)
++
++
++/*
++#####################################################################
++# MPI Control Registers
++#####################################################################
++*/
++#define CS0BASE 0x00
++#define CS0CNTL 0x04
++
++/*
++# CSxBASE settings
++# Size in low 4 bits
++# Base Address for match in upper 24 bits
++*/
++#define EBI_SIZE_8K 0
++#define EBI_SIZE_16K 1
++#define EBI_SIZE_32K 2
++#define EBI_SIZE_64K 3
++#define EBI_SIZE_128K 4
++#define EBI_SIZE_256K 5
++#define EBI_SIZE_512K 6
++#define EBI_SIZE_1M 7
++#define EBI_SIZE_2M 8
++#define EBI_SIZE_4M 9
++#define EBI_SIZE_8M 10
++#define EBI_SIZE_16M 11
++#define EBI_SIZE_32M 12
++#define EBI_SIZE_64M 13
++#define EBI_SIZE_128M 14
++#define EBI_SIZE_256M 15
++
++/* CSxCNTL settings */
++#define EBI_ENABLE 0x00000001 /* .. enable this range */
++#define EBI_WAIT_STATES 0x0000000e /* .. mask for wait states */
++#define ZEROWT 0x00000000 /* .. 0 WS */
++#define ONEWT 0x00000002 /* .. 1 WS */
++#define TWOWT 0x00000004 /* .. 2 WS */
++#define THREEWT 0x00000006 /* .. 3 WS */
++#define FOURWT 0x00000008 /* .. 4 WS */
++#define FIVEWT 0x0000000a /* .. 5 WS */
++#define SIXWT 0x0000000c /* .. 6 WS */
++#define SEVENWT 0x0000000e /* .. 7 WS */
++#define EBI_WORD_WIDE 0x00000010 /* .. 16-bit peripheral, else 8 */
++#define EBI_POLARITY 0x00000040 /* .. set to invert chip select polarity */
++#define EBI_TS_TA_MODE 0x00000080 /* .. use TS/TA mode */
++#define EBI_TS_SEL 0x00000100 /* .. drive tsize, not bs_b */
++#define EBI_FIFO 0x00000200 /* .. enable fifo */
++#define EBI_RE 0x00000400 /* .. Reverse Endian */
++
++/*
++#####################################################################
++# UART Control Registers
++#####################################################################
++*/
++#define UART0CONTROL 0x01
++#define UART0CONFIG 0x02
++#define UART0RXTIMEOUT 0x03
++#define UART0BAUD 0x04
++#define UART0FIFOCFG 0x0a
++#define UART0INTMASK 0x10
++#define UART0INTSTAT 0x12
++#define UART0DATA 0x17
++
++#define BRGEN 0x80 /* Control register bit defs */
++#define TXEN 0x40
++#define RXEN 0x20
++#define LOOPBK 0x10
++#define TXPARITYEN 0x08
++#define TXPARITYEVEN 0x04
++#define RXPARITYEN 0x02
++#define RXPARITYEVEN 0x01
++
++#define XMITBREAK 0x40 /* Config register */
++#define BITS5SYM 0x00
++#define BITS6SYM 0x10
++#define BITS7SYM 0x20
++#define BITS8SYM 0x30
++#define ONESTOP 0x07
++#define TWOSTOP 0x0f
++
++#define RSTTXFIFOS 0x80 /* Rx Timeout register */
++#define RSTRXFIFOS 0x40
++
++#define TX4 0x40 /* FIFO config register */
++#define RX4 0x04
++
++#define DELTAIP 0x0001 /* Interrupt Status and Mask registers */
++#define TXUNDERR 0x0002
++#define TXOVFERR 0x0004
++#define TXFIFOTHOLD 0x0008
++#define TXREADLATCH 0x0010
++#define TXFIFOEMT 0x0020
++#define RXUNDERR 0x0040
++#define RXOVFERR 0x0080
++#define RXTIMEOUT 0x0100
++#define RXFIFOFULL 0x0200
++#define RXFIFOTHOLD 0x0400
++#define RXFIFONE 0x0800
++#define RXFRAMERR 0x1000
++#define RXPARERR 0x2000
++#define RXBRK 0x4000
++
++#if __cplusplus
++}
++#endif
++
++#endif
+diff -urN linux-2.6.8.1/bcmdrivers/broadcom/include/bcm963xx/6348_map.h linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/include/bcm963xx/6348_map.h
+--- linux-2.6.8.1/bcmdrivers/broadcom/include/bcm963xx/6348_map.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/include/bcm963xx/6348_map.h 2006-06-26 09:07:10.000000000 +0200
+@@ -0,0 +1,1095 @@
++/*
++<:copyright-broadcom
++
++ Copyright (c) 2002 Broadcom Corporation
++ All Rights Reserved
++ No portions of this material may be reproduced in any form without the
++ written permission of:
++ Broadcom Corporation
++ 16215 Alton Parkway
++ Irvine, California 92619
++ All information contained in this document is Broadcom Corporation
++ company private, proprietary, and trade secret.
++
++:>
++*/
++/***********************************************************************/
++/* */
++/* MODULE: 6348_map.h */
++/* DATE: 11/06/03 */
++/* PURPOSE: Define addresses of major hardware components of */
++/* BCM6348 */
++/* */
++/***********************************************************************/
++#ifndef __BCM6348_MAP_H
++#define __BCM6348_MAP_H
++
++#if __cplusplus
++extern "C" {
++#endif
++
++#include "bcmtypes.h"
++#include "6348_common.h"
++#include "6348_intr.h"
++
++/* macro to convert logical data addresses to physical */
++/* DMA hardware must see physical address */
++#define LtoP( x ) ( (uint32)x & 0x1fffffff )
++#define PtoL( x ) ( LtoP(x) | 0xa0000000 )
++
++/*
++** Interrupt Controller
++*/
++typedef struct PerfControl {
++ uint32 RevID; /* (00) */
++ uint16 testControl; /* (04) */
++ uint16 blkEnables; /* (06) */
++
++#define ADSL_CLK_EN 0x0001
++#define MPI_CLK_EN 0x0002
++#define DRAM_CLK_EN 0x0004
++#define M2M_CLK_EN 0x0008
++#define EMAC_CLK_EN 0x0010
++#define SAR_CLK_EN 0x0020
++#define USBS_CLK_EN 0x0040
++#define USBH_CLK_EN 0x0100
++#define SPI_CLK_EN 0x0200
++
++ uint32 pll_control; /* (08) */
++#define CHIP_SOFT_RESET 0x00000001
++#define MPI_CLK_50MHZ 0x00000000
++#define MPI_CLK_40MHZ 0x00000008
++#define MPI_CLK_33MHZ 0x00000010
++#define MPI_CLK_25MHZ 0x00000018
++#define MPI_CLK_MASK 0x00000018
++
++ uint32 IrqMask; /* (0c) */
++ uint32 IrqStatus; /* (10) */
++
++ uint32 ExtIrqCfg;
++#define EI_SENSE_SHFT 0
++#define EI_STATUS_SHFT 5
++#define EI_CLEAR_SHFT 10
++#define EI_MASK_SHFT 15
++#define EI_INSENS_SHFT 20
++#define EI_LEVEL_SHFT 25
++
++ uint32 unused[4]; /* (18) */
++ uint32 BlockSoftReset; /* (28) */
++#define BSR_SPI 0x00000001
++#define BSR_EMAC 0x00000004
++#define BSR_USBH 0x00000008
++#define BSR_USBS 0x00000010
++#define BSR_ADSL 0x00000020
++#define BSR_DMAMEM 0x00000040
++#define BSR_SAR 0x00000080
++#define BSR_ACLC 0x00000100
++#define BSR_ADSL_MIPS_PLL 0x00000400
++#define BSR_ALL_BLOCKS \
++ (BSR_SPI | BSR_EMAC | BSR_USBH | BSR_USBS | BSR_ADSL | BSR_DMAMEM | \
++ BSR_SAR | BSR_ACLC | BSR_ADSL_MIPS_PLL)
++ uint32 unused2[2]; /* (2c) */
++ uint32 PllStrap; /* (34) */
++#define PLL_N1_SHFT 20
++#define PLL_N1_MASK (7<<PLL_N1_SHFT)
++#define PLL_N2_SHFT 15
++#define PLL_N2_MASK (0x1f<<PLL_N2_SHFT)
++#define PLL_M1_REF_SHFT 12
++#define PLL_M1_REF_MASK (7<<PLL_M1_REF_SHFT)
++#define PLL_M2_REF_SHFT 9
++#define PLL_M2_REF_MASK (7<<PLL_M2_REF_SHFT)
++#define PLL_M1_CPU_SHFT 6
++#define PLL_M1_CPU_MASK (7<<PLL_M1_CPU_SHFT)
++#define PLL_M1_BUS_SHFT 3
++#define PLL_M1_BUS_MASK (7<<PLL_M1_BUS_SHFT)
++#define PLL_M2_BUS_SHFT 0
++#define PLL_M2_BUS_MASK (7<<PLL_M2_BUS_SHFT)
++} PerfControl;
++
++#define PERF ((volatile PerfControl * const) PERF_BASE)
++
++/*
++** Bus Bridge Registers
++*/
++typedef struct BusBridge {
++ uint16 status;
++#define BB_BUSY 0x8000 /* posted operation in progress */
++#define BB_RD_PND 0x4000 /* read pending */
++#define BB_RD_CMPLT 0x2000 /* read complete */
++#define BB_ERROR 0x1000 /* posted write error */
++#define BB_TEA 0x0800 /* transfer aborted */
++ uint16 abortTimeoutCnt; /* abort timeout value */
++
++ byte writePostEnable;
++#define BB_POST_TIMR_EN 0x08 /* post writes to timer regs */
++#define BB_POST_GPIO_EN 0x04 /* post writes to gpio regs */
++#define BB_POST_INTC_EN 0x02 /* post writes to interrupt controller regs */
++#define BB_POST_UART_EN 0x01 /* post writes to uart regs */
++ byte unused1[5];
++ uint16 postAddr; /* posted read address (lower half) */
++ byte unused2[3];
++ byte postData; /* posted read data */
++} BusBridge;
++
++/* register offsets (needed for EBI master access) */
++#define BB_STATUS 0
++#define BB_ABORT_TO_CNT 2
++#define BB_WR_POST_EN 4
++#define BB_RD_POST_ADDR 10
++#define BB_RD_POST_DATA 12
++
++#define BRIDGE *bridge ((volatile BusBridge * const) BB_BASE)
++
++/*
++** Timer
++*/
++typedef struct Timer {
++ uint16 unused0;
++ byte TimerMask;
++#define TIMER0EN 0x01
++#define TIMER1EN 0x02
++#define TIMER2EN 0x04
++ byte TimerInts;
++#define TIMER0 0x01
++#define TIMER1 0x02
++#define TIMER2 0x04
++#define WATCHDOG 0x08
++ uint32 TimerCtl0;
++ uint32 TimerCtl1;
++ uint32 TimerCtl2;
++#define TIMERENABLE 0x80000000
++#define RSTCNTCLR 0x40000000
++ uint32 TimerCnt0;
++ uint32 TimerCnt1;
++ uint32 TimerCnt2;
++ uint32 WatchDogDefCount;
++
++ /* Write 0xff00 0x00ff to Start timer
++ * Write 0xee00 0x00ee to Stop and re-load default count
++ * Read from this register returns current watch dog count
++ */
++ uint32 WatchDogCtl;
++
++ /* Number of 40-MHz ticks for WD Reset pulse to last */
++ uint32 WDResetCount;
++} Timer;
++
++#define TIMER ((volatile Timer * const) TIMR_BASE)
++
++/*
++** UART
++*/
++typedef struct UartChannel {
++ byte unused0;
++ byte control;
++#define BRGEN 0x80 /* Control register bit defs */
++#define TXEN 0x40
++#define RXEN 0x20
++#define LOOPBK 0x10
++#define TXPARITYEN 0x08
++#define TXPARITYEVEN 0x04
++#define RXPARITYEN 0x02
++#define RXPARITYEVEN 0x01
++
++ byte config;
++#define XMITBREAK 0x40
++#define BITS5SYM 0x00
++#define BITS6SYM 0x10
++#define BITS7SYM 0x20
++#define BITS8SYM 0x30
++#define ONESTOP 0x07
++#define TWOSTOP 0x0f
++ /* 4-LSBS represent STOP bits/char
++ * in 1/8 bit-time intervals. Zero
++ * represents 1/8 stop bit interval.
++ * Fifteen represents 2 stop bits.
++ */
++ byte fifoctl;
++#define RSTTXFIFOS 0x80
++#define RSTRXFIFOS 0x40
++ /* 5-bit TimeoutCnt is in low bits of this register.
++ * This count represents the number of characters
++ * idle times before setting receive Irq when below threshold
++ */
++ uint32 baudword;
++ /* When divide SysClk/2/(1+baudword) we should get 32*bit-rate
++ */
++
++ byte txf_levl; /* Read-only fifo depth */
++ byte rxf_levl; /* Read-only fifo depth */
++ byte fifocfg; /* Upper 4-bits are TxThresh, Lower are
++ * RxThreshold. Irq can be asserted
++ * when rx fifo> thresh, txfifo<thresh
++ */
++ byte prog_out; /* Set value of DTR (Bit0), RTS (Bit1)
++ * if these bits are also enabled to GPIO_o
++ */
++#define DTREN 0x01
++#define RTSEN 0x02
++
++ byte unused1;
++ byte DeltaIPEdgeNoSense; /* Low 4-bits, set corr bit to 1 to
++ * detect irq on rising AND falling
++ * edges for corresponding GPIO_i
++ * if enabled (edge insensitive)
++ */
++ byte DeltaIPConfig_Mask; /* Upper 4 bits: 1 for posedge sense
++ * 0 for negedge sense if
++ * not configured for edge
++ * insensitive (see above)
++ * Lower 4 bits: Mask to enable change
++ * detection IRQ for corresponding
++ * GPIO_i
++ */
++ byte DeltaIP_SyncIP; /* Upper 4 bits show which bits
++ * have changed (may set IRQ).
++ * read automatically clears bit
++ * Lower 4 bits are actual status
++ */
++
++ uint16 intMask; /* Same Bit defs for Mask and status */
++ uint16 intStatus;
++#define DELTAIP 0x0001
++#define TXUNDERR 0x0002
++#define TXOVFERR 0x0004
++#define TXFIFOTHOLD 0x0008
++#define TXREADLATCH 0x0010
++#define TXFIFOEMT 0x0020
++#define RXUNDERR 0x0040
++#define RXOVFERR 0x0080
++#define RXTIMEOUT 0x0100
++#define RXFIFOFULL 0x0200
++#define RXFIFOTHOLD 0x0400
++#define RXFIFONE 0x0800
++#define RXFRAMERR 0x1000
++#define RXPARERR 0x2000
++#define RXBRK 0x4000
++
++ uint16 unused2;
++ uint16 Data; /* Write to TX, Read from RX */
++ /* bits 11:8 are BRK,PAR,FRM errors */
++
++ uint32 unused3;
++ uint32 unused4;
++} Uart;
++
++#define UART ((volatile Uart * const) UART_BASE)
++
++/*
++** Gpio Controller
++*/
++
++typedef struct GpioControl {
++ uint32 GPIODir_high; /* bits 36:32 */
++ uint32 GPIODir; /* bits 31:00 */
++ uint32 GPIOio_high; /* bits 36:32 */
++ uint32 GPIOio; /* bits 31:00 */
++ uint32 LEDCtrl;
++#define LED3_STROBE 0x08000000
++#define LED2_STROBE 0x04000000
++#define LED1_STROBE 0x02000000
++#define LED0_STROBE 0x01000000
++#define LED_TEST 0x00010000
++#define LED3_DISABLE_LINK_ACT 0x00008000
++#define LED2_DISABLE_LINK_ACT 0x00004000
++#define LED1_DISABLE_LINK_ACT 0x00002000
++#define LED0_DISABLE_LINK_ACT 0x00001000
++#define LED_INTERVAL_SET_MASK 0x00000f00
++#define LED_INTERVAL_SET_320MS 0x00000500
++#define LED_INTERVAL_SET_160MS 0x00000400
++#define LED_INTERVAL_SET_80MS 0x00000300
++#define LED_INTERVAL_SET_40MS 0x00000200
++#define LED_INTERVAL_SET_20MS 0x00000100
++#define LED3_ON 0x00000080
++#define LED2_ON 0x00000040
++#define LED1_ON 0x00000020
++#define LED0_ON 0x00000010
++#define LED3_ENABLE 0x00000008
++#define LED2_ENABLE 0x00000004
++#define LED1_ENABLE 0x00000002
++#define LED0_ENABLE 0x00000001
++ uint32 SpiSlaveCfg;
++#define SPI_SLAVE_RESET 0x00010000
++#define SPI_RESTRICT 0x00000400
++#define SPI_DELAY_DISABLE 0x00000200
++#define SPI_PROBE_MUX_SEL_MASK 0x000001e0
++#define SPI_SER_ADDR_CFG_MASK 0x0000000c
++#define SPI_MODE 0x00000001
++ uint32 GPIOMode;
++#define GROUP4_DIAG 0x00090000
++#define GROUP4_UTOPIA 0x00080000
++#define GROUP4_LEGACY_LED 0x00030000
++#define GROUP4_MII_SNOOP 0x00020000
++#define GROUP4_EXT_EPHY 0x00010000
++#define GROUP3_DIAG 0x00009000
++#define GROUP3_UTOPIA 0x00008000
++#define GROUP3_EXT_MII 0x00007000
++#define GROUP2_DIAG 0x00000900
++#define GROUP2_PCI 0x00000500
++#define GROUP1_DIAG 0x00000090
++#define GROUP1_UTOPIA 0x00000080
++#define GROUP1_SPI_UART 0x00000060
++#define GROUP1_SPI_MASTER 0x00000060
++#define GROUP1_MII_PCCARD 0x00000040
++#define GROUP1_MII_SNOOP 0x00000020
++#define GROUP1_EXT_EPHY 0x00000010
++#define GROUP0_DIAG 0x00000009
++#define GROUP0_EXT_MII 0x00000007
++
++} GpioControl;
++
++#define GPIO ((volatile GpioControl * const) GPIO_BASE)
++
++/* Number to mask conversion macro used for GPIODir and GPIOio */
++#define GPIO_NUM_TOTAL_BITS_MASK 0x3f
++#define GPIO_NUM_MAX_BITS_MASK 0x1f
++#define GPIO_NUM_TO_MASK(X) ( (((X) & GPIO_NUM_TOTAL_BITS_MASK) < 32) ? (1 << ((X) & GPIO_NUM_MAX_BITS_MASK)) : (0) )
++
++/* Number to mask conversion macro used for GPIODir_high and GPIOio_high */
++#define GPIO_NUM_MAX_BITS_MASK_HIGH 0x07
++#define GPIO_NUM_TO_MASK_HIGH(X) ( (((X) & GPIO_NUM_TOTAL_BITS_MASK) >= 32) ? (1 << ((X-32) & GPIO_NUM_MAX_BITS_MASK_HIGH)) : (0) )
++
++
++/*
++** Spi Controller
++*/
++
++typedef struct SpiControl {
++ uint16 spiCmd; /* (0x0): SPI command */
++#define SPI_CMD_NOOP 0
++#define SPI_CMD_SOFT_RESET 1
++#define SPI_CMD_HARD_RESET 2
++#define SPI_CMD_START_IMMEDIATE 3
++
++#define SPI_CMD_COMMAND_SHIFT 0
++#define SPI_CMD_DEVICE_ID_SHIFT 4
++#define SPI_CMD_PREPEND_BYTE_CNT_SHIFT 8
++#define SPI_CMD_ONE_BYTE_SHIFT 11
++#define SPI_CMD_ONE_WIRE_SHIFT 12
++#define SPI_DEV_ID_0 0
++#define SPI_DEV_ID_1 1
++#define SPI_DEV_ID_2 2
++#define SPI_DEV_ID_3 3
++
++ byte spiIntStatus; /* (0x2): SPI interrupt status */
++ byte spiMaskIntStatus; /* (0x3): SPI masked interrupt status */
++
++ byte spiIntMask; /* (0x4): SPI interrupt mask */
++#define SPI_INTR_CMD_DONE 0x01
++#define SPI_INTR_RX_OVERFLOW 0x02
++#define SPI_INTR_INTR_TX_UNDERFLOW 0x04
++#define SPI_INTR_TX_OVERFLOW 0x08
++#define SPI_INTR_RX_UNDERFLOW 0x10
++#define SPI_INTR_CLEAR_ALL 0x1f
++
++ byte spiStatus; /* (0x5): SPI status */
++#define SPI_RX_EMPTY 0x02
++#define SPI_CMD_BUSY 0x04
++#define SPI_SERIAL_BUSY 0x08
++
++ byte spiClkCfg; /* (0x6): SPI clock configuration */
++#define SPI_CLK_0_391MHZ 1
++#define SPI_CLK_0_781MHZ 2 /* default */
++#define SPI_CLK_1_563MHZ 3
++#define SPI_CLK_3_125MHZ 4
++#define SPI_CLK_6_250MHZ 5
++#define SPI_CLK_12_50MHZ 6
++#define SPI_CLK_MASK 0x07
++#define SPI_SSOFFTIME_MASK 0x38
++#define SPI_SSOFFTIME_SHIFT 3
++#define SPI_BYTE_SWAP 0x80
++
++ byte spiFillByte; /* (0x7): SPI fill byte */
++
++ byte unused0;
++ byte spiMsgTail; /* (0x9): msgtail */
++ byte unused1;
++ byte spiRxTail; /* (0xB): rxtail */
++
++ uint32 unused2[13]; /* (0x0c - 0x3c) reserved */
++
++ byte spiMsgCtl; /* (0x40) control byte */
++#define FULL_DUPLEX_RW 0
++#define HALF_DUPLEX_W 1
++#define HALF_DUPLEX_R 2
++#define SPI_MSG_TYPE_SHIFT 6
++#define SPI_BYTE_CNT_SHIFT 0
++ byte spiMsgData[63]; /* (0x41 - 0x7f) msg data */
++ byte spiRxDataFifo[64]; /* (0x80 - 0xbf) rx data */
++ byte unused3[64]; /* (0xc0 - 0xff) reserved */
++} SpiControl;
++
++#define SPI ((volatile SpiControl * const) SPI_BASE)
++
++#define IUDMA_MAX_CHANNELS 16
++
++/*
++** DMA Channel Configuration (1 .. 16)
++*/
++typedef struct DmaChannelCfg {
++ uint32 cfg; /* (00) assorted configuration */
++#define DMA_BURST_HALT 0x00000004 /* idle after finish current memory burst */
++#define DMA_PKT_HALT 0x00000002 /* idle after an EOP flag is detected */
++#define DMA_ENABLE 0x00000001 /* set to enable channel */
++ uint32 intStat; /* (04) interrupts control and status */
++ uint32 intMask; /* (08) interrupts mask */
++#define DMA_BUFF_DONE 0x00000001 /* buffer done */
++#define DMA_DONE 0x00000002 /* packet xfer complete */
++#define DMA_NO_DESC 0x00000004 /* no valid descriptors */
++ uint32 maxBurst; /* (0C) max burst length permitted */
++} DmaChannelCfg;
++
++/*
++** DMA State RAM (1 .. 16)
++*/
++typedef struct DmaStateRam {
++ uint32 baseDescPtr; /* (00) descriptor ring start address */
++ uint32 state_data; /* (04) state/bytes done/ring offset */
++ uint32 desc_len_status; /* (08) buffer descriptor status and len */
++ uint32 desc_base_bufptr; /* (0C) buffer descrpitor current processing */
++} DmaStateRam;
++
++/*
++** DMA Registers
++*/
++typedef struct DmaRegs {
++#define DMA_MASTER_EN 0x00000001
++#define DMA_FLOWC_CH1_EN 0x00000002
++#define DMA_FLOWC_CH3_EN 0x00000004
++#define DMA_NUM_CHS_MASK 0x0f000000
++#define DMA_NUM_CHS_SHIFT 24
++#define DMA_FLOWCTL_MASK 0x30000000
++#define DMA_FLOWCTL_CH1 0x10000000
++#define DMA_FLOWCTL_CH3 0x20000000
++#define DMA_FLOWCTL_SHIFT 28
++ uint32 controller_cfg; /* (00) controller configuration */
++
++ // Flow control Ch1
++ uint32 flowctl_ch1_thresh_lo; /* (04) EMAC1 RX DMA channel */
++ uint32 flowctl_ch1_thresh_hi; /* (08) EMAC1 RX DMA channel */
++ uint32 flowctl_ch1_alloc; /* (0C) EMAC1 RX DMA channel */
++#define DMA_BUF_ALLOC_FORCE 0x80000000
++
++ // Flow control Ch3
++ uint32 flowctl_ch3_thresh_lo; /* (10) EMAC2 RX DMA channel */
++ uint32 flowctl_ch3_thresh_hi; /* (14) EMAC2 RX DMA channel */
++ uint32 flowctl_ch3_alloc; /* (18) EMAC2 RX DMA channel */
++
++ // Unused words
++ uint32 resv[57];
++
++ // Per channel registers/state ram
++ DmaChannelCfg chcfg[IUDMA_MAX_CHANNELS]; /* (100) Channel configuration */
++ union {
++ DmaStateRam s[IUDMA_MAX_CHANNELS];
++ uint32 u32[4 * IUDMA_MAX_CHANNELS];
++ } stram; /* (200) state ram */
++} DmaRegs;
++
++/*
++** DMA Buffer
++*/
++typedef struct DmaDesc {
++ uint16 length; /* in bytes of data in buffer */
++#define DMA_DESC_USEFPM 0x8000
++#define DMA_DESC_MULTICAST 0x4000
++#define DMA_DESC_BUFLENGTH 0x0fff
++ uint16 status; /* buffer status */
++#define DMA_OWN 0x8000 /* cleared by DMA, set by SW */
++#define DMA_EOP 0x4000 /* last buffer in packet */
++#define DMA_SOP 0x2000 /* first buffer in packet */
++#define DMA_WRAP 0x1000 /* */
++#define DMA_APPEND_CRC 0x0100
++
++/* EMAC Descriptor Status definitions */
++#define EMAC_MISS 0x0080 /* framed address recognition failed (promiscuous) */
++#define EMAC_BRDCAST 0x0040 /* DA is Broadcast */
++#define EMAC_MULT 0x0020 /* DA is multicast */
++#define EMAC_LG 0x0010 /* frame length > RX_LENGTH register value */
++#define EMAC_NO 0x0008 /* Non-Octet aligned */
++#define EMAC_RXER 0x0004 /* RX_ERR on MII while RX_DV assereted */
++#define EMAC_CRC_ERROR 0x0002 /* CRC error */
++#define EMAC_OV 0x0001 /* Overflow */
++
++/* HDLC Descriptor Status definitions */
++#define DMA_HDLC_TX_ABORT 0x0100
++#define DMA_HDLC_RX_OVERRUN 0x4000
++#define DMA_HDLC_RX_TOO_LONG 0x2000
++#define DMA_HDLC_RX_CRC_OK 0x1000
++#define DMA_HDLC_RX_ABORT 0x0100
++
++ uint32 address; /* address of data */
++} DmaDesc;
++
++/*
++** Sdram Controller
++*/
++typedef struct SdramControllerRegs {
++ uint16 unused1;
++ uint16 initControl; /* 02 */
++#define SD_POWER_DOWN 0x200 /* put sdram into power down */
++#define SD_SELF_REFRESH 0x100 /* enable self refresh mode */
++#define SD_SOFT_RESET 0x080 /* soft reset all sdram controller regs */
++#define SD_EDO_SELECT 0x040 /* select EDO mode */
++#define SD_EDO_WAIT_STATE 0x020 /* add an EDO wait state */
++#define SD_8MEG 0x010 /* map sdram to 8 megs */
++#define SD_MASTER_ENABLE 0x008 /* enable accesses to external sdram */
++#define SD_MRS 0x004 /* generate a mode register select cycle */
++#define SD_PRECHARGE 0x002 /* generate a precharge cycle */
++#define SD_CBR 0x001 /* generate a refresh cycle */
++ uint8 unused2[3];
++ uint8 config; /* 07 */
++#define SD_FAST_MEM 0x04 /* 1=CAS latency of 2, 0 = CAS latency of 3 */
++#define SD_BURST_LEN 0x03 /* set burst length */
++#define SD_BURST_FULL_PAGE 0x00 /* .. full page */
++#define SD_BURST_8 0x01 /* .. 8 words */
++#define SD_BURST_4 0x02 /* .. 4 words */
++#define SD_BURST_2 0x03 /* .. 2 words */
++ uint16 unused3;
++ uint16 refreshControl; /* 0a */
++#define SD_REFRESH_ENABLE 0x8000 /* refresh enable */
++#define SD_REFRESH_PERIOD 0x00ff /* refresh period (16 x n x clock_period) */
++
++ uint32 memoryBase; /* 0c */
++#define SD_MEMBASE_MASK 0xffffe000 /* base address mask */
++#define SD_MEMSIZE_8MEG 0x00000001 /* memory is 8 meg */
++#define SD_MEMSIZE_2MEG 0x00000001 /* memory is 2 meg */
++
++} SdramControllerRegs;
++
++/*
++** External Bus Interface
++*/
++typedef struct EbiChipSelect {
++ uint32 base; /* base address in upper 24 bits */
++#define EBI_SIZE_8K 0
++#define EBI_SIZE_16K 1
++#define EBI_SIZE_32K 2
++#define EBI_SIZE_64K 3
++#define EBI_SIZE_128K 4
++#define EBI_SIZE_256K 5
++#define EBI_SIZE_512K 6
++#define EBI_SIZE_1M 7
++#define EBI_SIZE_2M 8
++#define EBI_SIZE_4M 9
++#define EBI_SIZE_8M 10
++#define EBI_SIZE_16M 11
++#define EBI_SIZE_32M 12
++#define EBI_SIZE_64M 13
++#define EBI_SIZE_128M 14
++#define EBI_SIZE_256M 15
++ uint32 config;
++#define EBI_ENABLE 0x00000001 /* .. enable this range */
++#define EBI_WAIT_STATES 0x0000000e /* .. mask for wait states */
++#define EBI_WTST_SHIFT 1 /* .. for shifting wait states */
++#define EBI_WORD_WIDE 0x00000010 /* .. 16-bit peripheral, else 8 */
++#define EBI_WREN 0x00000020 /* enable posted writes */
++#define EBI_POLARITY 0x00000040 /* .. set to invert something,
++ ** don't know what yet */
++#define EBI_TS_TA_MODE 0x00000080 /* .. use TS/TA mode */
++#define EBI_TS_SEL 0x00000100 /* .. drive tsize, not bs_b */
++#define EBI_FIFO 0x00000200 /* .. use fifo */
++#define EBI_RE 0x00000400 /* .. Reverse Endian */
++} EbiChipSelect;
++
++typedef struct MpiRegisters {
++ EbiChipSelect cs[7]; /* size chip select configuration */
++#define EBI_CS0_BASE 0
++#define EBI_CS1_BASE 1
++#define EBI_CS2_BASE 2
++#define EBI_CS3_BASE 3
++#define PCMCIA_COMMON_BASE 4
++#define PCMCIA_ATTRIBUTE_BASE 5
++#define PCMCIA_IO_BASE 6
++ uint32 unused0[2]; /* reserved */
++ uint32 ebi_control; /* ebi control */
++ uint32 unused1[4]; /* reserved */
++#define EBI_ACCESS_TIMEOUT 0x000007FF
++ uint32 pcmcia_cntl1; /* pcmcia control 1 */
++#define PCCARD_CARD_RESET 0x00040000
++#define CARDBUS_ENABLE 0x00008000
++#define PCMCIA_ENABLE 0x00004000
++#define PCMCIA_GPIO_ENABLE 0x00002000
++#define CARDBUS_IDSEL 0x00001F00
++#define VS2_OEN 0x00000080
++#define VS1_OEN 0x00000040
++#define VS2_OUT 0x00000020
++#define VS1_OUT 0x00000010
++#define VS2_IN 0x00000008
++#define VS1_IN 0x00000004
++#define CD2_IN 0x00000002
++#define CD1_IN 0x00000001
++#define VS_MASK 0x0000000C
++#define CD_MASK 0x00000003
++ uint32 unused2; /* reserved */
++ uint32 pcmcia_cntl2; /* pcmcia control 2 */
++#define PCMCIA_BYTESWAP_DIS 0x00000002
++#define PCMCIA_HALFWORD_EN 0x00000001
++ uint32 unused3[40]; /* reserved */
++
++ uint32 sp0range; /* PCI to internal system bus address space */
++#define ADDR_SPACE_MASK 0xFFFF0000
++ uint32 sp0remap;
++ uint32 sp0cfg;
++ uint32 sp1range;
++ uint32 sp1remap;
++ uint32 sp1cfg;
++
++ uint32 EndianCfg;
++
++ uint32 l2pcfgctl; /* internal system bus to PCI IO/Cfg control */
++#define DIR_CFG_SEL 0x80000000 /* change from PCI I/O access to PCI config access */
++#define DIR_CFG_USEREG 0x40000000 /* use this register info for PCI configuration access */
++#define DEVICE_NUMBER 0x00007C00 /* device number for the PCI configuration access */
++#define FUNC_NUMBER 0x00000300 /* function number for the PCI configuration access */
++#define REG_NUMBER 0x000000FC /* register number for the PCI configuration access */
++#define CONFIG_TYPE 0x00000003 /* configuration type for the PCI configuration access */
++
++ uint32 l2pmrange1; /* internal system bus to PCI memory space */
++#define PCI_SIZE_64K 0xFFFF0000
++#define PCI_SIZE_128K 0xFFFE0000
++#define PCI_SIZE_256K 0xFFFC0000
++#define PCI_SIZE_512K 0xFFF80000
++#define PCI_SIZE_1M 0xFFF00000
++#define PCI_SIZE_2M 0xFFE00000
++#define PCI_SIZE_4M 0xFFC00000
++#define PCI_SIZE_8M 0xFF800000
++#define PCI_SIZE_16M 0xFF000000
++ uint32 l2pmbase1; /* kseg0 or kseg1 address & 0x1FFFFFFF */
++ uint32 l2pmremap1;
++#define CARDBUS_MEM 0x00000004
++#define MEM_WINDOW_EN 0x00000001
++ uint32 l2pmrange2;
++ uint32 l2pmbase2;
++ uint32 l2pmremap2;
++ uint32 l2piorange; /* internal system bus to PCI I/O space */
++ uint32 l2piobase;
++ uint32 l2pioremap;
++
++ uint32 pcimodesel;
++#define PCI2_INT_BUS_RD_PREFECH 0x000000F0
++#define PCI_BAR2_NOSWAP 0x00000002 /* BAR at offset 0x20 */
++#define PCI_BAR1_NOSWAP 0x00000001 /* BAR at affset 0x1c */
++
++ uint32 pciintstat; /* PCI interrupt mask/status */
++#define MAILBOX1_SENT 0x08
++#define MAILBOX0_SENT 0x04
++#define MAILBOX1_MSG_RCV 0x02
++#define MAILBOX0_MSG_RCV 0x01
++ uint32 locbuscntrl; /* internal system bus control */
++#define DIR_U2P_NOSWAP 0x00000002
++#define EN_PCI_GPIO 0x00000001
++ uint32 locintstat; /* internal system bus interrupt mask/status */
++#define CSERR 0x0200
++#define SERR 0x0100
++#define EXT_PCI_INT 0x0080
++#define DIR_FAILED 0x0040
++#define DIR_COMPLETE 0x0020
++#define PCI_CFG 0x0010
++ uint32 unused4[7];
++
++ uint32 mailbox0;
++ uint32 mailbox1;
++
++ uint32 pcicfgcntrl; /* internal system bus PCI configuration control */
++#define PCI_CFG_REG_WRITE_EN 0x00000080
++#define PCI_CFG_ADDR 0x0000003C
++ uint32 pcicfgdata; /* internal system bus PCI configuration data */
++
++ uint32 locch2ctl; /* PCI to interrnal system bus DMA (downstream) local control */
++#define MPI_DMA_HALT 0x00000008 /* idle after finish current memory burst */
++#define MPI_DMA_PKT_HALT 0x00000004 /* idle after an EOP flag is detected */
++#define MPI_DMA_STALL 0x00000002 /* idle after an EOP flag is detected */
++#define MPI_DMA_ENABLE 0x00000001 /* set to enable channel */
++ uint32 locch2intStat;
++#define MPI_DMA_NO_DESC 0x00000004 /* no valid descriptors */
++#define MPI_DMA_DONE 0x00000002 /* packet xfer complete */
++#define MPI_DMA_BUFF_DONE 0x00000001 /* buffer done */
++ uint32 locch2intMask;
++ uint32 unused5;
++ uint32 locch2descaddr;
++ uint32 locch2status1;
++#define LOCAL_DESC_STATE 0xE0000000
++#define PCI_DESC_STATE 0x1C000000
++#define BYTE_DONE 0x03FFC000
++#define RING_ADDR 0x00003FFF
++ uint32 locch2status2;
++#define BUFPTR_OFFSET 0x1FFF0000
++#define PCI_MASTER_STATE 0x000000C0
++#define LOC_MASTER_STATE 0x00000038
++#define CONTROL_STATE 0x00000007
++ uint32 unused6;
++
++ uint32 locch1Ctl; /*internal system bus to PCI DMA (upstream) local control */
++#define DMA_U2P_LE 0x00000200 /* local bus is little endian */
++#define DMA_U2P_NOSWAP 0x00000100 /* lccal bus is little endian but no data swapped */
++ uint32 locch1intstat;
++ uint32 locch1intmask;
++ uint32 unused7;
++ uint32 locch1descaddr;
++ uint32 locch1status1;
++ uint32 locch1status2;
++ uint32 unused8;
++
++ uint32 pcich1ctl; /* internal system bus to PCI DMA PCI control */
++ uint32 pcich1intstat;
++ uint32 pcich1intmask;
++ uint32 pcich1descaddr;
++ uint32 pcich1status1;
++ uint32 pcich1status2;
++
++ uint32 pcich2Ctl; /* PCI to internal system bus DMA PCI control */
++ uint32 pcich2intstat;
++ uint32 pcich2intmask;
++ uint32 pcich2descaddr;
++ uint32 pcich2status1;
++ uint32 pcich2status2;
++
++ uint32 perm_id; /* permanent device and vendor id */
++ uint32 perm_rev; /* permanent revision id */
++} MpiRegisters;
++
++#define MPI ((volatile MpiRegisters * const) MPI_BASE)
++
++/* PCI configuration address space start offset 0x40 */
++#define BRCM_PCI_CONFIG_TIMER 0x40
++#define BRCM_PCI_CONFIG_TIMER_RETRY_MASK 0x0000FF00
++#define BRCM_PCI_CONFIG_TIMER_TRDY_MASK 0x000000FF
++
++/*
++** EMAC transmit MIB counters
++*/
++typedef struct EmacTxMib {
++ uint32 tx_good_octets; /* (200) good byte count */
++ uint32 tx_good_pkts; /* (204) good pkt count */
++ uint32 tx_octets; /* (208) good and bad byte count */
++ uint32 tx_pkts; /* (20c) good and bad pkt count */
++ uint32 tx_broadcasts_pkts; /* (210) good broadcast packets */
++ uint32 tx_multicasts_pkts; /* (214) good mulitcast packets */
++ uint32 tx_len_64; /* (218) RMON tx pkt size buckets */
++ uint32 tx_len_65_to_127; /* (21c) */
++ uint32 tx_len_128_to_255; /* (220) */
++ uint32 tx_len_256_to_511; /* (224) */
++ uint32 tx_len_512_to_1023; /* (228) */
++ uint32 tx_len_1024_to_max; /* (22c) */
++ uint32 tx_jabber_pkts; /* (230) > 1518 with bad crc */
++ uint32 tx_oversize_pkts; /* (234) > 1518 with good crc */
++ uint32 tx_fragment_pkts; /* (238) < 63 with bad crc */
++ uint32 tx_underruns; /* (23c) fifo underrun */
++ uint32 tx_total_cols; /* (240) total collisions in all tx pkts */
++ uint32 tx_single_cols; /* (244) tx pkts with single collisions */
++ uint32 tx_multiple_cols; /* (248) tx pkts with multiple collisions */
++ uint32 tx_excessive_cols; /* (24c) tx pkts with excessive cols */
++ uint32 tx_late_cols; /* (250) tx pkts with late cols */
++ uint32 tx_defered; /* (254) tx pkts deferred */
++ uint32 tx_carrier_lost; /* (258) tx pkts with CRS lost */
++ uint32 tx_pause_pkts; /* (25c) tx pause pkts sent */
++#define NumEmacTxMibVars 24
++} EmacTxMib;
++
++/*
++** EMAC receive MIB counters
++*/
++typedef struct EmacRxMib {
++ uint32 rx_good_octets; /* (280) good byte count */
++ uint32 rx_good_pkts; /* (284) good pkt count */
++ uint32 rx_octets; /* (288) good and bad byte count */
++ uint32 rx_pkts; /* (28c) good and bad pkt count */
++ uint32 rx_broadcasts_pkts; /* (290) good broadcast packets */
++ uint32 rx_multicasts_pkts; /* (294) good mulitcast packets */
++ uint32 rx_len_64; /* (298) RMON rx pkt size buckets */
++ uint32 rx_len_65_to_127; /* (29c) */
++ uint32 rx_len_128_to_255; /* (2a0) */
++ uint32 rx_len_256_to_511; /* (2a4) */
++ uint32 rx_len_512_to_1023; /* (2a8) */
++ uint32 rx_len_1024_to_max; /* (2ac) */
++ uint32 rx_jabber_pkts; /* (2b0) > 1518 with bad crc */
++ uint32 rx_oversize_pkts; /* (2b4) > 1518 with good crc */
++ uint32 rx_fragment_pkts; /* (2b8) < 63 with bad crc */
++ uint32 rx_missed_pkts; /* (2bc) missed packets */
++ uint32 rx_crc_align_errs; /* (2c0) both or either */
++ uint32 rx_undersize; /* (2c4) < 63 with good crc */
++ uint32 rx_crc_errs; /* (2c8) crc errors (only) */
++ uint32 rx_align_errs; /* (2cc) alignment errors (only) */
++ uint32 rx_symbol_errs; /* (2d0) pkts with RXERR assertions (symbol errs) */
++ uint32 rx_pause_pkts; /* (2d4) MAC control, PAUSE */
++ uint32 rx_nonpause_pkts; /* (2d8) MAC control, not PAUSE */
++#define NumEmacRxMibVars 23
++} EmacRxMib;
++
++typedef struct EmacRegisters {
++ uint32 rxControl; /* (00) receive control */
++#define EMAC_PM_REJ 0x80 /* - reject DA match in PMx regs */
++#define EMAC_UNIFLOW 0x40 /* - accept cam match fc */
++#define EMAC_FC_EN 0x20 /* - enable flow control */
++#define EMAC_LOOPBACK 0x10 /* - loopback */
++#define EMAC_PROM 0x08 /* - promiscuous */
++#define EMAC_RDT 0x04 /* - ignore transmissions */
++#define EMAC_ALL_MCAST 0x02 /* - ignore transmissions */
++#define EMAC_NO_BCAST 0x01 /* - ignore transmissions */
++
++
++ uint32 rxMaxLength; /* (04) receive max length */
++ uint32 txMaxLength; /* (08) transmit max length */
++ uint32 unused1[1];
++ uint32 mdioFreq; /* (10) mdio frequency */
++#define EMAC_MII_PRE_EN 0x00000080 /* prepend preamble sequence */
++#define EMAC_MDIO_PRE 0x00000080 /* - enable MDIO preamble */
++#define EMAC_MDC_FREQ 0x0000007f /* - mdio frequency */
++
++ uint32 mdioData; /* (14) mdio data */
++#define MDIO_WR 0x50020000 /* - write framing */
++#define MDIO_RD 0x60020000 /* - read framing */
++#define MDIO_PMD_SHIFT 23
++#define MDIO_REG_SHIFT 18
++
++ uint32 intMask; /* (18) int mask */
++ uint32 intStatus; /* (1c) int status */
++#define EMAC_FLOW_INT 0x04 /* - flow control event */
++#define EMAC_MIB_INT 0x02 /* - mib event */
++#define EMAC_MDIO_INT 0x01 /* - mdio event */
++
++ uint32 unused2[3];
++ uint32 config; /* (2c) config */
++#define EMAC_ENABLE 0x001 /* - enable emac */
++#define EMAC_DISABLE 0x002 /* - disable emac */
++#define EMAC_SOFT_RST 0x004 /* - soft reset */
++#define EMAC_SOFT_RESET 0x004 /* - emac soft reset */
++#define EMAC_EXT_PHY 0x008 /* - external PHY select */
++
++ uint32 txControl; /* (30) transmit control */
++#define EMAC_FD 0x001 /* - full duplex */
++#define EMAC_FLOWMODE 0x002 /* - flow mode */
++#define EMAC_NOBKOFF 0x004 /* - no backoff in */
++#define EMAC_SMALLSLT 0x008 /* - small slot time */
++
++ uint32 txThreshold; /* (34) transmit threshold */
++ uint32 mibControl; /* (38) mib control */
++#define EMAC_NO_CLEAR 0x001 /* don't clear on read */
++
++ uint32 unused3[7];
++
++ uint32 pm0DataLo; /* (58) perfect match 0 data lo */
++ uint32 pm0DataHi; /* (5C) perfect match 0 data hi (15:0) */
++ uint32 pm1DataLo; /* (60) perfect match 1 data lo */
++ uint32 pm1DataHi; /* (64) perfect match 1 data hi (15:0) */
++ uint32 pm2DataLo; /* (68) perfect match 2 data lo */
++ uint32 pm2DataHi; /* (6C) perfect match 2 data hi (15:0) */
++ uint32 pm3DataLo; /* (70) perfect match 3 data lo */
++ uint32 pm3DataHi; /* (74) perfect match 3 data hi (15:0) */
++#define EMAC_CAM_V 0x10000 /* - cam index */
++#define EMAC_CAM_VALID 0x00010000
++
++ uint32 unused4[98]; /* (78-1fc) */
++
++ EmacTxMib tx_mib; /* (200) emac tx mib */
++ uint32 unused5[8]; /* (260-27c) */
++
++ EmacRxMib rx_mib; /* (280) rx mib */
++
++} EmacRegisters;
++
++/* register offsets for subrouting access */
++#define EMAC_RX_CONTROL 0x00
++#define EMAC_RX_MAX_LENGTH 0x04
++#define EMAC_TX_MAC_LENGTH 0x08
++#define EMAC_MDIO_FREQ 0x10
++#define EMAC_MDIO_DATA 0x14
++#define EMAC_INT_MASK 0x18
++#define EMAC_INT_STATUS 0x1C
++#define EMAC_CAM_DATA_LO 0x20
++#define EMAC_CAM_DATA_HI 0x24
++#define EMAC_CAM_CONTROL 0x28
++#define EMAC_CONTROL 0x2C
++#define EMAC_TX_CONTROL 0x30
++#define EMAC_TX_THRESHOLD 0x34
++#define EMAC_MIB_CONTROL 0x38
++
++
++#define EMAC1 ((volatile EmacRegisters * const) EMAC1_BASE)
++#define EMAC2 ((volatile EmacRegisters * const) EMAC2_BASE)
++
++/*
++** USB Registers
++*/
++typedef struct UsbRegisters {
++ byte inttf_setting;
++ byte current_config;
++ uint16 status_frameNum;
++#define USB_LINK 0x2000
++#define USB_BUS_RESET 0x1000
++#define USB_SUSPENDED 0x0800
++ byte unused1;
++ byte endpt_prnt;
++ byte endpt_dirn;
++ byte endpt_status;
++#define USB_ENDPOINT_0 0x01
++#define USB_ENDPOINT_1 0x02
++#define USB_ENDPOINT_2 0x04
++#define USB_ENDPOINT_3 0x08
++#define USB_ENDPOINT_4 0x10
++#define USB_ENDPOINT_5 0x20
++#define USB_ENDPOINT_6 0x40
++#define USB_ENDPOINT_7 0x80
++ uint32 unused2;
++ byte conf_mem_ctl;
++#define USB_CONF_MEM_RD 0x80
++#define USB_CONF_MEM_RDY 0x40
++ byte unused2a;
++ byte conf_mem_read_address;
++ byte conf_mem_write_address;
++
++ byte unused3;
++ byte dev_req_bytesel;
++ uint16 ext_dev_data;
++
++ byte unused4;
++ byte clr_fifo;
++ byte endpt_stall_reset; // use same endpoint #'s from above
++ byte usb_cntl;
++#define USB_FORCE_ERR 0x20
++#define USB_SOFT_RESET 0x10
++#define USB_RESUME 0x08
++#define USB_COMMAND_ERR 0x04
++#define USB_COMMAND_OVER 0x02
++ byte irq_addr;
++ byte iso_out_in_addr;
++ byte blk_out_in_addr;
++ byte cntl_addr;
++ uint32 unusedx[2];
++ uint32 tx_ram_write_port;
++ uint32 fifo_status; // (see bcm6348 data sheet for definition)
++
++ uint32 irq_status;
++ uint32 irq_mask;
++#define USB_NEW_CONFIG 0x00000001
++#define USB_SETUP_COMMAND_RECV 0x00000002 // non-standard setup cmd rcvd
++#define USB_OUT_FIFO_OV 0x00000004
++#define USB_RESET_RECV 0x00000008
++#define USB_SUSPEND_RECV 0x00000010
++#define USB_FIFO_REWIND 0x00000020
++#define USB_RX_BULK_FIFO_DATA_AVAIL 0x00000040
++#define USB_RX_ISO_FIFO_DATA_AVAIL 0x00000080
++#define USB_LINK_CHANGE 0x00010000
++ uint32 endpt_cntl;
++#define USB_R_WK_EN 0x0100
++#define USB_TX_EOP 0x0200
++#define USB_TX_CNTL_DMA_EN 0x0400
++#define USB_TX_BULK_DMA_EN 0x0800
++#define USB_TX_ISO_DMA_EN 0x1000
++#define USB_RX_CNTL_DMA_EN 0x2000
++#define USB_RX_BULK_DMA_EN 0x4800
++#define USB_RX_ISO_DMA_EN 0x8000
++ uint32 rx_status_read_port;
++ uint32 confmem_read_port;
++ uint32 confmem_write_port;
++ uint32 fifo_ovf_count;
++ uint32 fifo_rewind_cnt;
++ uint32 terminal_count;
++} UsbRegisters;
++
++#define USB ((volatile UsbRegisters * const) USB_CTL_BASE)
++
++/*
++** ADSL core Registers
++*/
++
++#define _PADLINE(line) pad ## line
++#define _XSTR(line) _PADLINE(line)
++#define PAD _XSTR(__LINE__)
++
++typedef struct AdslRegisters {
++ uint32 core_control;
++#define ADSL_RESET 0x01
++
++ uint32 core_status;
++#define ADSL_HOST_MSG 0x01
++
++ uint32 PAD;
++ uint32 bist_status;
++ uint32 PAD[4];
++ uint32 int_status_i; /* 0x20 */
++ uint32 int_mask_i;
++ uint32 int_status_f;
++ uint32 int_mask_f;
++#define ADSL_INT_HOST_MSG 0x00000020
++#define ADSL_INT_DESC_ERR 0x00000400
++#define ADSL_INT_DATA_ERR 0x00000800
++#define ADSL_INT_DESC_PROTO_ERR 0x00001000
++#define ADSL_INT_RCV_DESC_UF 0x00002000
++#define ADSL_INT_RCV_FIFO_OF 0x00004000
++#define ADSL_INT_XMT_FIFO_UF 0x00008000
++#define ADSL_INT_RCV 0x00010000
++#define ADSL_INT_XMT 0x01000000
++
++ uint32 PAD[116];
++
++ uint32 xmtcontrol_intr; /* 0x200 */
++#define ADSL_DMA_XMT_EN 0x00000001
++#define ADSL_DMA_XMT_LE 0x00000004
++ uint32 xmtaddr_intr;
++#define ADSL_DMA_ADDR_MASK 0xFFFFF000
++ uint32 xmtptr_intr;
++#define ADSL_DMA_LAST_DESC_MASK 0x00000FFF
++ uint32 xmtstatus_intr;
++#define ADSL_DMA_CURR_DESC_MASK 0x00000FFF
++#define ADSL_DMA_XMT_STATE_MASK 0x0000F000
++#define ADSL_DMA_XMT_STATE_DIS 0x00000000
++#define ADSL_DMA_XMT_STATE_ACT 0x00001000
++#define ADSL_DMA_XMT_STATE_IDLE 0x00002000
++#define ADSL_DMA_XMT_STATE_STOP 0x00003000
++
++#define ADSL_DMA_XMT_ERR_MASK 0x000F0000
++#define ADSL_DMA_XMT_ERR_NONE 0x00000000
++#define ADSL_DMA_XMT_ERR_DPE 0x00010000
++#define ADSL_DMA_XMT_ERR_FIFO 0x00020000
++#define ADSL_DMA_XMT_ERR_DTE 0x00030000
++#define ADSL_DMA_XMT_ERR_DRE 0x00040000
++
++ uint32 rcvcontrol_intr;
++#define ADSL_DMA_RCV_EN 0x00000001
++#define ADSL_DMA_RCV_FO 0x000000FE
++ uint32 rcvaddr_intr;
++ uint32 rcvptr_intr;
++ uint32 rcvstatus_intr;
++#define ADSL_DMA_RCV_STATE_MASK 0x0000F000
++#define ADSL_DMA_RCV_STATE_DIS 0x00000000
++#define ADSL_DMA_RCV_STATE_ACT 0x00001000
++#define ADSL_DMA_RCV_STATE_IDLE 0x00002000
++#define ADSL_DMA_RCV_STATE_STOP 0x00003000
++
++#define ADSL_DMA_RCV_ERR_MASK 0x000F0000
++#define ADSL_DMA_RCV_ERR_NONE 0x00000000
++#define ADSL_DMA_RCV_ERR_DPE 0x00010000
++#define ADSL_DMA_RCV_ERR_FIFO 0x00020000
++#define ADSL_DMA_RCV_ERR_DTE 0x00030000
++#define ADSL_DMA_RCV_ERR_DRE 0x00040000
++
++ uint32 xmtcontrol_fast;
++ uint32 xmtaddr_fast;
++ uint32 xmtptr_fast;
++ uint32 xmtstatus_fast;
++ uint32 rcvcontrol_fast;
++ uint32 rcvaddr_fast;
++ uint32 rcvptr_fast;
++ uint32 rcvstatus_fast;
++ uint32 PAD[48];
++
++ uint32 host_message; /* 0x300 */
++ uint32 PAD[805];
++ uint32 core_reset;
++ uint32 core_error;
++ uint32 core_revision;
++
++#define ADSL_CORE_REV 0x0000000F
++#define ADSL_CORE_TYPE 0x0000FFF0
++} AdslRegisters;
++
++#define ADSL ((volatile AdslRegisters * const) ADSL_BASE)
++
++#if __cplusplus
++}
++#endif
++
++#endif
++
+diff -urN linux-2.6.8.1/bcmdrivers/broadcom/include/bcm963xx/AdslMibDef.h linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/include/bcm963xx/AdslMibDef.h
+--- linux-2.6.8.1/bcmdrivers/broadcom/include/bcm963xx/AdslMibDef.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/include/bcm963xx/AdslMibDef.h 2006-06-26 09:07:10.000000000 +0200
+@@ -0,0 +1,712 @@
++/*
++<:copyright-broadcom
++
++ Copyright (c) 2002 Broadcom Corporation
++ All Rights Reserved
++ No portions of this material may be reproduced in any form without the
++ written permission of:
++ Broadcom Corporation
++ 16215 Alton Parkway
++ Irvine, California 92619
++ All information contained in this document is Broadcom Corporation
++ company private, proprietary, and trade secret.
++
++:>
++*/
++/****************************************************************************
++ *
++ * AdslMibOid.h
++ *
++ * Description:
++ * SNMP object identifiers for ADSL MIB and other related MIBs
++ *
++ * Copyright (c) 1993-1998 AltoCom, Inc. All rights reserved.
++ * Authors: Ilya Stomakhin
++ *
++ * $Revision: 1.17 $
++ *
++ * $Id: AdslMibDef.h,v 1.17 2004/07/27 19:24:40 ilyas Exp $
++ *
++ * $Log: AdslMibDef.h,v $
++ * Revision 1.17 2004/07/27 19:24:40 ilyas
++ * Added AnnexM configuration option
++ *
++ * Revision 1.16 2004/06/04 18:56:01 ilyas
++ * Added counter for ADSL2 framing and performance
++ *
++ * Revision 1.15 2004/05/25 16:15:04 ilyas
++ * Added ADSL2 framing status
++ *
++ * Revision 1.14 2004/03/31 19:09:48 ilyas
++ * Added ADSL2+ modulation control
++ *
++ * Revision 1.13 2004/03/03 20:14:05 ilyas
++ * Merged changes for ADSL2+ from ADSL driver
++ *
++ * Revision 1.12 2003/10/17 21:02:12 ilyas
++ * Added more data for ADSL2
++ *
++ * Revision 1.11 2003/10/14 00:55:27 ilyas
++ * Added UAS, LOSS, SES error seconds counters.
++ * Support for 512 tones (AnnexI)
++ *
++ * Revision 1.10 2003/09/29 18:39:51 ilyas
++ * Added new definitions for AnnexI
++ *
++ * Revision 1.9 2003/07/18 19:14:34 ilyas
++ * Merged with ADSL driver
++ *
++ * Revision 1.8 2003/07/08 18:34:16 ilyas
++ * Added fields to adsl configuration structure
++ *
++ * Revision 1.7 2003/03/25 00:07:00 ilyas
++ * Added "long" BERT supprt
++ *
++ * Revision 1.6 2003/02/27 07:10:52 ilyas
++ * Added more configuration and status parameters (for EFNT)
++ *
++ * Revision 1.5 2003/01/23 20:29:37 ilyas
++ * Added structure for ADSL PHY configuration command
++ *
++ * Revision 1.4 2002/11/13 21:32:49 ilyas
++ * Added adjustK support for Centillium non-standard framing mode
++ *
++ * Revision 1.3 2002/10/31 01:35:50 ilyas
++ * Fixed size of K for S=1/2
++ *
++ * Revision 1.2 2002/10/05 03:28:31 ilyas
++ * Added extra definitions for Linux and VxWorks drivers.
++ * Added definitions for SelfTest support
++ *
++ * Revision 1.1 2002/07/20 00:51:41 ilyas
++ * Merged witchanges made for VxWorks/Linux driver.
++ *
++ * Revision 1.1 2001/12/21 22:39:30 ilyas
++ * Added support for ADSL MIB data objects (RFC2662)
++ *
++ *
++ *****************************************************************************/
++
++#ifndef AdslMibDefHeader
++#define AdslMibDefHeader
++
++#if defined(__cplusplus)
++extern "C" {
++#endif
++
++/*
++**
++** ADSL configuration parameters
++**
++*/
++
++#define kAdslCfgModMask (0x00000007 | 0x0000F000)
++#define kAdslCfgModAny 0x00000000
++
++#define kAdslCfgModGdmtOnly 0x00000001
++#define kAdslCfgModGliteOnly 0x00000002
++#define kAdslCfgModT1413Only 0x00000004
++#define kAdslCfgModAnnexIOnly 0x00000004
++#define kAdslCfgModAdsl2Only 0x00001000
++#define kAdslCfgModAdsl2pOnly 0x00002000
++
++#define kAdslCfgBitmapMask 0x00000018
++#define kAdslCfgDBM 0x00000000
++#define kAdslCfgFBM 0x00000008
++#define kAdslCfgFBMSoL 0x00000010
++
++#define kAdslCfgLinePairMask 0x00000020
++#define kAdslCfgLineInnerPair 0x00000000
++#define kAdslCfgLineOuterPair 0x00000020
++
++#define kAdslCfgCentilliumCRCWorkAroundMask 0x00000040
++#define kAdslCfgCentilliumCRCWorkAroundDisabled 0x00000000
++#define kAdslCfgCentilliumCRCWorkAroundEnabled 0x00000040
++
++#define kAdslCfgExtraData 0x00000080
++#define kAdslCfgTrellisMask (0x00000100 | kAdslCfgExtraData)
++#define kAdslCfgTrellisOn (0x00000100 | kAdslCfgExtraData)
++#define kAdslCfgTrellisOff (0 | kAdslCfgExtraData)
++#define kAdslCfgExtraMask 0xFFFFFF80
++
++#define kAdslCfgLOSMonitoringMask 0x00000200
++#define kAdslCfgLOSMonitoringOff 0x00000200
++#define kAdslCfgLOSMonitoringOn 0x00000000
++
++#define kAdslCfgMarginMonitoringMask 0x00000400
++#define kAdslCfgMarginMonitoringOn 0x00000400
++#define kAdslCfgMarginMonitoringOff 0x00000000
++
++#define kAdslCfgDemodCapMask 0x00000800
++#define kAdslCfgDemodCapOn 0x00000800
++#define kAdslCfgDemodCapOff 0x00000000
++
++/* Flags 0x00001000 - 0x00008000 are reserved for modulation (see above) */
++
++/* Upstream mode flags 0x00010000 - 0x00030000 */
++
++#define kAdslCfgUpstreamModeMask 0x00030000
++#define kAdslCfgUpstreamMax 0x00000000
++#define kAdslCfgUpstreamSingle 0x00010000
++#define kAdslCfgUpstreamDouble 0x00020000
++#define kAdslCfgUpstreamTriple 0x00030000
++
++#define kAdslCfgNoSpectrumOverlap 0x00040000
++
++/* Pwm sync clock configuration */
++
++#define kAdslCfgPwmSyncClockMask 0x00080000
++#define kAdslCfgPwmSyncClockOn 0x00080000
++#define kAdslCfgPwmSyncClockOff 0x00000000
++
++#define kAdslCfgDefaultTrainingMargin -1
++#define kAdslCfgDefaultShowtimeMargin -1
++#define kAdslCfgDefaultLOMTimeThld -1
++
++/* ADSL2 parameters */
++
++#define kAdsl2CfgReachExOn 0x00000001
++#define kAdsl2CfgAnnexMEnabled 0x00000002
++
++typedef struct _adslCfgProfile {
++ long adslAnnexCParam;
++ long adslAnnexAParam;
++ long adslTrainingMarginQ4;
++ long adslShowtimeMarginQ4;
++ long adslLOMTimeThldSec;
++ long adslDemodCapMask;
++ long adslDemodCapValue;
++ long adsl2Param;
++ long adslPwmSyncClockFreq;
++} adslCfgProfile;
++
++/*
++**
++** ADSL PHY configuration
++**
++*/
++
++typedef struct _adslPhyCfg {
++ long demodCapMask;
++ long demodCap;
++} adslPhyCfg;
++
++/*
++**
++** ADSL version info parameters
++**
++*/
++
++#define kAdslVersionStringSize 32
++
++#define kAdslTypeUnknown 0
++#define kAdslTypeAnnexA 1
++#define kAdslTypeAnnexB 2
++#define kAdslTypeAnnexC 3
++#define kAdslTypeSADSL 4
++
++typedef struct _adslVersionInfo {
++ unsigned short phyType;
++ unsigned short phyMjVerNum;
++ unsigned short phyMnVerNum;
++ char phyVerStr[kAdslVersionStringSize];
++ unsigned short drvMjVerNum;
++ unsigned short drvMnVerNum;
++ char drvVerStr[kAdslVersionStringSize];
++} adslVersionInfo;
++
++/*
++**
++** ADSL self-test parameters
++**
++*/
++
++#define kAdslSelfTestLMEM 0x00000001
++#define kAdslSelfTestSDRAM 0x00000002
++#define kAdslSelfTestAFE 0x00000004
++#define kAdslSelfTestQproc 0x00000008
++#define kAdslSelfTestRS 0x00000010
++#define kAdslSelfTestHostDma 0x00000020
++
++#define kAdslSelfTestAll ((kAdslSelfTestHostDma - 1) | kAdslSelfTestHostDma)
++
++#define kAdslSelfTestInProgress 0x40000000
++#define kAdslSelfTestCompleted 0x80000000
++
++/* MIB OID's for ADSL objects */
++
++#define kOidMaxObjLen 80
++
++#define kOidAdsl 94
++#define kOidAdslInterleave 124
++#define kOidAdslFast 125
++#define kOidAtm 37
++#define kOidAdslPrivate 255
++#define kOidAdslPrivatePartial 254
++
++#define kAdslMibAnnexAToneNum 256
++#define kAdslMibToneNum kAdslMibAnnexAToneNum
++#define kAdslMibMaxToneNum kAdslMibAnnexAToneNum*2*2
++
++#define kOidAdslPrivSNR 1
++#define kOidAdslPrivBitAlloc 2
++#define kOidAdslPrivGain 3
++#define kOidAdslPrivShowtimeMargin 4
++#define kOidAdslPrivChanCharLin 5
++#define kOidAdslPrivChanCharLog 6
++#define kOidAdslPrivQuietLineNoise 7
++#define kOidAdslPrivExtraInfo 255
++
++#define kOidAdslLine 1
++#define kOidAdslMibObjects 1
++
++#define kOidAdslLineTable 1
++#define kOidAdslLineEntry 1
++#define kOidAdslLineCoding 1
++#define kOidAdslLineType 2
++#define kOidAdslLineSpecific 3
++#define kOidAdslLineConfProfile 4
++#define kOidAdslLineAlarmConfProfile 5
++
++#define kOidAdslAtucPhysTable 2
++#define kOidAdslAturPhysTable 3
++#define kOidAdslPhysEntry 1
++#define kOidAdslPhysInvSerialNumber 1
++#define kOidAdslPhysInvVendorID 2
++#define kOidAdslPhysInvVersionNumber 3
++#define kOidAdslPhysCurrSnrMgn 4
++#define kOidAdslPhysCurrAtn 5
++#define kOidAdslPhysCurrStatus 6
++#define kOidAdslPhysCurrOutputPwr 7
++#define kOidAdslPhysCurrAttainableRate 8
++
++#define kOidAdslAtucChanTable 4
++#define kOidAdslAturChanTable 5
++#define kOidAdslChanEntry 1
++#define kOidAdslChanInterleaveDelay 1
++#define kOidAdslChanCurrTxRate 2
++#define kOidAdslChanPrevTxRate 3
++#define kOidAdslChanCrcBlockLength 4
++
++#define kOidAdslAtucPerfDataTable 6
++#define kOidAdslAturPerfDataTable 7
++#define kOidAdslPerfDataEntry 1
++#define kOidAdslPerfLofs 1
++#define kOidAdslPerfLoss 2
++#define kOidAdslPerfLprs 3
++#define kOidAdslPerfESs 4
++#define kOidAdslPerfValidIntervals 5
++#define kOidAdslPerfInvalidIntervals 6
++#define kOidAdslPerfCurr15MinTimeElapsed 7
++#define kOidAdslPerfCurr15MinLofs 8
++#define kOidAdslPerfCurr15MinLoss 9
++#define kOidAdslPerfCurr15MinLprs 10
++#define kOidAdslPerfCurr15MinESs 11
++#define kOidAdslPerfCurr1DayTimeElapsed 12
++#define kOidAdslPerfCurr1DayLofs 13
++#define kOidAdslPerfCurr1DayLoss 14
++#define kOidAdslPerfCurr1DayLprs 15
++#define kOidAdslPerfCurr1DayESs 16
++#define kOidAdslPerfPrev1DayMoniSecs 17
++#define kOidAdslPerfPrev1DayLofs 18
++#define kOidAdslPerfPrev1DayLoss 19
++#define kOidAdslPerfPrev1DayLprs 20
++#define kOidAdslPerfPrev1DayESs 21
++
++#define kOidAdslAtucPerfIntervalTable 8
++#define kOidAdslAturPerfIntervalTable 9
++#define kOidAdslPerfIntervalEntry 1
++#define kOidAdslIntervalNumber 1
++#define kOidAdslIntervalLofs 2
++#define kOidAdslIntervalLoss 3
++#define kOidAdslIntervalLprs 4
++#define kOidAdslIntervalESs 5
++#define kOidAdslIntervalValidData 6
++
++#define kOidAdslAtucChanPerfTable 10
++#define kOidAdslAturChanPerfTable 11
++#define kOidAdslChanPerfEntry 1
++#define kOidAdslChanReceivedBlks 1
++#define kOidAdslChanTransmittedBlks 2
++#define kOidAdslChanCorrectedBlks 3
++#define kOidAdslChanUncorrectBlks 4
++#define kOidAdslChanPerfValidIntervals 5
++#define kOidAdslChanPerfInvalidIntervals 6
++#define kOidAdslChanPerfCurr15MinTimeElapsed 7
++#define kOidAdslChanPerfCurr15MinReceivedBlks 8
++#define kOidAdslChanPerfCurr15MinTransmittedBlks 9
++#define kOidAdslChanPerfCurr15MinCorrectedBlks 10
++#define kOidAdslChanPerfCurr15MinUncorrectBlks 11
++#define kOidAdslChanPerfCurr1DayTimeElapsed 12
++#define kOidAdslChanPerfCurr1DayReceivedBlks 13
++#define kOidAdslChanPerfCurr1DayTransmittedBlks 14
++#define kOidAdslChanPerfCurr1DayCorrectedBlks 15
++#define kOidAdslChanPerfCurr1DayUncorrectBlks 16
++#define kOidAdslChanPerfPrev1DayMoniSecs 17
++#define kOidAdslChanPerfPrev1DayReceivedBlks 18
++#define kOidAdslChanPerfPrev1DayTransmittedBlks 19
++#define kOidAdslChanPerfPrev1DayCorrectedBlks 20
++#define kOidAdslChanPerfPrev1DayUncorrectBlks 21
++
++#define kOidAdslAtucChanIntervalTable 12
++#define kOidAdslAturChanIntervalTable 13
++#define kOidAdslChanIntervalEntry 1
++#define kOidAdslChanIntervalNumber 1
++#define kOidAdslChanIntervalReceivedBlks 2
++#define kOidAdslChanIntervalTransmittedBlks 3
++#define kOidAdslChanIntervalCorrectedBlks 4
++#define kOidAdslChanIntervalUncorrectBlks 5
++#define kOidAdslChanIntervalValidData 6
++
++#define kOidAtmMibObjects 1
++#define kOidAtmTcTable 4
++#define kOidAtmTcEntry 1
++#define kOidAtmOcdEvents 1
++#define kOidAtmAlarmState 2
++
++/* Adsl Channel coding */
++
++#define kAdslRcvDir 0
++#define kAdslXmtDir 1
++
++#define kAdslRcvActive (1 << kAdslRcvDir)
++#define kAdslXmtActive (1 << kAdslXmtDir)
++
++#define kAdslIntlChannel 0
++#define kAdslFastChannel 1
++
++#define kAdslTrellisOff 0
++#define kAdslTrellisOn 1
++
++/* AnnexC modulation and bitmap types for the field (adslConnection.modType) */
++
++#define kAdslModMask 0x7
++
++#define kAdslModGdmt 0
++#define kAdslModT1413 1
++#define kAdslModGlite 2
++#define kAdslModAnnexI 3
++#define kAdslModAdsl2 4
++#define kAdslModAdsl2p 5
++#define kAdslModReAdsl2 6
++
++#define kAdslBitmapShift 3
++#define kAdslBitmapMask kAdslCfgBitmapMask
++#define kAdslDBM (0 << kAdslBitmapShift)
++#define kAdslFBM (1 << kAdslBitmapShift)
++#define kAdslFBMSoL (2 << kAdslBitmapShift)
++
++#define kAdslUpstreamModeShift 5
++#define kAdslUpstreamModeMask (3 << kAdslUpstreamModeShift)
++#define kAdslUpstreamModeSingle (0 << kAdslUpstreamModeShift)
++#define kAdslUpstreamModeDouble (1 << kAdslUpstreamModeShift)
++#define kAdslUpstreamModeTriple (2 << kAdslUpstreamModeShift)
++
++/* AdslLineCodingType definitions */
++
++#define kAdslLineCodingOther 1
++#define kAdslLineCodingDMT 2
++#define kAdslLineCodingCAP 3
++#define kAdslLineCodingQAM 4
++
++/* AdslLineType definitions */
++
++#define kAdslLineTypeNoChannel 1
++#define kAdslLineTypeFastOnly 2
++#define kAdslLineTypeIntlOnly 3
++#define kAdslLineTypeFastOrIntl 4
++#define kAdslLineTypeFastAndIntl 5
++
++typedef struct _adslLineEntry {
++ unsigned char adslLineCoding;
++ unsigned char adslLineType;
++} adslLineEntry;
++
++
++/* AdslPhys status definitions */
++
++#define kAdslPhysStatusNoDefect (1 << 0)
++#define kAdslPhysStatusLOF (1 << 1) /* lossOfFraming (not receiving valid frame) */
++#define kAdslPhysStatusLOS (1 << 2) /* lossOfSignal (not receiving signal) */
++#define kAdslPhysStatusLPR (1 << 3) /* lossOfPower */
++#define kAdslPhysStatusLOSQ (1 << 4) /* lossOfSignalQuality */
++#define kAdslPhysStatusLOM (1 << 5) /* lossOfMargin */
++
++typedef struct _adslPhysEntry {
++ long adslCurrSnrMgn;
++ long adslCurrAtn;
++ long adslCurrStatus;
++ long adslCurrOutputPwr;
++ long adslCurrAttainableRate;
++} adslPhysEntry;
++
++#define kAdslPhysVendorIdLen 8
++#define kAdslPhysSerialNumLen 32
++#define kAdslPhysVersionNumLen 32
++
++typedef struct _adslFullPhysEntry {
++ char adslSerialNumber[kAdslPhysSerialNumLen];
++ char adslVendorID[kAdslPhysVendorIdLen];
++ char adslVersionNumber[kAdslPhysVersionNumLen];
++ long adslCurrSnrMgn;
++ long adslCurrAtn;
++ long adslCurrStatus;
++ long adslCurrOutputPwr;
++ long adslCurrAttainableRate;
++} adslFullPhysEntry;
++
++/* Adsl channel entry definitions */
++
++typedef struct _adslChanEntry {
++ unsigned long adslChanIntlDelay;
++ unsigned long adslChanCurrTxRate;
++ unsigned long adslChanPrevTxRate;
++ unsigned long adslChanCrcBlockLength;
++} adslChanEntry;
++
++/* Adsl performance data definitions */
++
++typedef struct _adslPerfCounters {
++ unsigned long adslLofs;
++ unsigned long adslLoss;
++ unsigned long adslLols; /* Loss of Link failures (ATUC only) */
++ unsigned long adslLprs;
++ unsigned long adslESs; /* Count of Errored Seconds */
++ unsigned long adslInits; /* Count of Line initialization attempts (ATUC only) */
++ unsigned long adslUAS; /* Count of Unavailable Seconds */
++ unsigned long adslSES; /* Count of Severely Errored Seconds */
++ unsigned long adslLOSS; /* Count of LOS seconds */
++ unsigned long adslFECs; /* Count of FEC seconds */
++} adslPerfCounters;
++
++typedef struct _adslPerfDataEntry {
++ adslPerfCounters perfTotal;
++ unsigned long adslPerfValidIntervals;
++ unsigned long adslPerfInvalidIntervals;
++ adslPerfCounters perfCurr15Min;
++ unsigned long adslPerfCurr15MinTimeElapsed;
++ adslPerfCounters perfCurr1Day;
++ unsigned long adslPerfCurr1DayTimeElapsed;
++ adslPerfCounters perfPrev1Day;
++ unsigned long adslAturPerfPrev1DayMoniSecs;
++} adslPerfDataEntry;
++
++#define kAdslMibPerfIntervals 4
++
++/* Adsl channel performance data definitions */
++
++typedef struct _adslChanCounters {
++ unsigned long adslChanReceivedBlks;
++ unsigned long adslChanTransmittedBlks;
++ unsigned long adslChanCorrectedBlks;
++ unsigned long adslChanUncorrectBlks;
++} adslChanCounters;
++
++typedef struct _adslChanPerfDataEntry {
++ adslChanCounters perfTotal;
++ unsigned long adslChanPerfValidIntervals;
++ unsigned long adslChanPerfInvalidIntervals;
++ adslChanCounters perfCurr15Min;
++ unsigned long adslPerfCurr15MinTimeElapsed;
++ adslChanCounters perfCurr1Day;
++ unsigned long adslPerfCurr1DayTimeElapsed;
++ adslChanCounters perfPrev1Day;
++ unsigned long adslAturPerfPrev1DayMoniSecs;
++} adslChanPerfDataEntry;
++
++#define kAdslMibChanPerfIntervals 4
++
++/* Adsl trap threshold definitions */
++
++#define kAdslEventLinkChange 0x001
++#define kAdslEventRateChange 0x002
++#define kAdslEventLofThresh 0x004
++#define kAdslEventLosThresh 0x008
++#define kAdslEventLprThresh 0x010
++#define kAdslEventESThresh 0x020
++#define kAdslEventFastUpThresh 0x040
++#define kAdslEventIntlUpThresh 0x080
++#define kAdslEventFastDownThresh 0x100
++#define kAdslEventIntlDwonThresh 0x200
++
++typedef struct _adslThreshCounters {
++ unsigned long adslThreshLofs;
++ unsigned long adslThreshLoss;
++ unsigned long adslThreshLols; /* Loss of Link failures (ATUC only) */
++ unsigned long adslThreshLprs;
++ unsigned long adslThreshESs;
++ unsigned long adslThreshFastRateUp;
++ unsigned long adslThreshIntlRateUp;
++ unsigned long adslThreshFastRateDown;
++ unsigned long adslThreshIntlRateDown;
++} adslThreshCounters;
++
++
++/* Atm PHY performance data definitions */
++
++#define kAtmPhyStateNoAlarm 1
++#define kAtmPhyStateLcdFailure 2
++
++typedef struct _atmPhyDataEntrty {
++ unsigned long atmInterfaceOCDEvents;
++ unsigned long atmInterfaceTCAlarmState;
++} atmPhyDataEntrty;
++
++typedef struct _adslBertResults {
++ unsigned long bertTotalBits;
++ unsigned long bertErrBits;
++} adslBertResults;
++
++typedef struct {
++ unsigned long cntHi;
++ unsigned long cntLo;
++} cnt64;
++
++typedef struct _adslBertStatusEx {
++ unsigned long bertSecTotal;
++ unsigned long bertSecElapsed;
++ unsigned long bertSecCur;
++ cnt64 bertTotalBits;
++ cnt64 bertErrBits;
++} adslBertStatusEx;
++
++typedef struct _adslDataConnectionInfo {
++ unsigned short K;
++ unsigned char S, R, D;
++} adslDataConnectionInfo;
++
++typedef struct _adslConnectionInfo {
++ unsigned char chType; /* fast or interleaved */
++ unsigned char modType; /* modulation type: G.DMT or T1.413 */
++ unsigned char trellisCoding; /* off(0) or on(1) */
++ adslDataConnectionInfo rcvInfo;
++ adslDataConnectionInfo xmtInfo;
++} adslConnectionInfo;
++
++typedef struct _adsl2DataConnectionInfo {
++ unsigned char Nlp;
++ unsigned char Nbc;
++ unsigned char MSGlp;
++ unsigned short MSGc;
++
++ unsigned long L;
++ unsigned short M;
++ unsigned short T;
++ unsigned short D;
++ unsigned short R;
++ unsigned short B;
++} adsl2DataConnectionInfo;
++
++typedef struct _adsl2ConnectionInfo {
++ long adsl2Mode;
++ long rcvRate;
++ long xmtRate;
++ unsigned char pwrState; /* Lx state: x = 0..3 */
++ adsl2DataConnectionInfo rcv2Info;
++ adsl2DataConnectionInfo xmt2Info;
++} adsl2ConnectionInfo;
++
++typedef struct _adslConnectionDataStat {
++ unsigned long cntRS;
++ unsigned long cntRSCor;
++ unsigned long cntRSUncor;
++ unsigned long cntSF;
++ unsigned long cntSFErr;
++} adslConnectionDataStat;
++
++typedef struct _adslConnectionStat {
++ adslConnectionDataStat rcvStat;
++ adslConnectionDataStat xmtStat;
++} adslConnectionStat;
++
++typedef struct _atmConnectionDataStat {
++ unsigned long cntHEC;
++ unsigned long cntOCD;
++ unsigned long cntLCD;
++ unsigned long cntES;
++ unsigned long cntCellTotal;
++ unsigned long cntCellData;
++ unsigned long cntCellDrop;
++ unsigned long cntBitErrs;
++} atmConnectionDataStat;
++
++typedef struct _atmConnectionStat {
++ atmConnectionDataStat rcvStat;
++ atmConnectionDataStat xmtStat;
++} atmConnectionStat;
++
++#define kAdslFramingModeMask 0x0F
++#define kAtmFramingModeMask 0xF0
++#define kAtmHeaderCompression 0x80
++
++/* ADSL2 data */
++
++typedef struct _adslDiagModeData {
++ long loopAttn;
++ long signalAttn;
++ long snrMargin;
++ long attnDataRate;
++ long actXmtPower;
++ long hlinScaleFactor;
++} adslDiagModeData;
++
++/* AdslMibGetObjectValue return codes */
++
++#define kAdslMibStatusSuccess 0
++#define kAdslMibStatusFailure -1
++#define kAdslMibStatusNoObject -2
++#define kAdslMibStatusObjectInvalid -3
++#define kAdslMibStatusBufferTooSmall -4
++#define kAdslMibStatusLastError -4
++
++/* Adsl training codes */
++
++#define kAdslTrainingIdle 0
++#define kAdslTrainingG994 1
++#define kAdslTrainingG992Started 2
++#define kAdslTrainingG992ChanAnalysis 3
++#define kAdslTrainingG992Exchange 4
++#define kAdslTrainingConnected 5
++
++/* Global info structure */
++
++typedef struct _adslMibInfo {
++ adslLineEntry adslLine;
++ adslPhysEntry adslPhys;
++ adslChanEntry adslChanIntl;
++ adslChanEntry adslChanFast;
++ adslPerfDataEntry adslPerfData;
++ adslPerfCounters adslPerfIntervals[kAdslMibPerfIntervals];
++ adslChanPerfDataEntry adslChanIntlPerfData;
++ adslChanPerfDataEntry adslChanFastPerfData;
++ adslChanCounters adslChanIntlPerfIntervals[kAdslMibChanPerfIntervals];
++ adslChanCounters adslChanFastPerfIntervals[kAdslMibChanPerfIntervals];
++
++ adslThreshCounters adslAlarm;
++
++ atmPhyDataEntrty adslChanIntlAtmPhyData;
++ atmPhyDataEntrty adslChanFastAtmPhyData;
++
++ adslBertResults adslBertRes;
++
++ adslConnectionInfo adslConnection;
++ adslConnectionStat adslStat;
++ unsigned char adslTrainingState;
++ atmConnectionStat atmStat;
++
++ adslFullPhysEntry adslAtucPhys;
++ unsigned char adslRxNonStdFramingAdjustK;
++ unsigned char adslFramingMode;
++ adslBertStatusEx adslBertStatus;
++ long afeRxPgaGainQ1;
++
++ adslDiagModeData adslDiag;
++ adsl2ConnectionInfo adsl2Info;
++ adslPerfCounters adslTxPerfTotal;
++} adslMibInfo;
++
++#if defined(__cplusplus)
++}
++#endif
++
++#endif /* AdslMibDefHeader */
+diff -urN linux-2.6.8.1/bcmdrivers/broadcom/include/bcm963xx/DiagDef.h linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/include/bcm963xx/DiagDef.h
+--- linux-2.6.8.1/bcmdrivers/broadcom/include/bcm963xx/DiagDef.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/include/bcm963xx/DiagDef.h 2006-06-26 09:07:10.000000000 +0200
+@@ -0,0 +1,209 @@
++/*
++<:copyright-broadcom
++
++ Copyright (c) 2002 Broadcom Corporation
++ All Rights Reserved
++ No portions of this material may be reproduced in any form without the
++ written permission of:
++ Broadcom Corporation
++ 16215 Alton Parkway
++ Irvine, California 92619
++ All information contained in this document is Broadcom Corporation
++ company private, proprietary, and trade secret.
++
++:>
++*/
++
++/*******************************************************************
++ * DiagDef.h
++ *
++ * Description:
++ * Diag definitions
++ *
++ * $Revision: 1.22 $
++ *
++ * $Id: DiagDef.h,v 1.22 2004/10/16 23:43:19 ilyas Exp $
++ *
++ * $Log: DiagDef.h,v $
++ * Revision 1.22 2004/10/16 23:43:19 ilyas
++ * Added playback resume command
++ *
++ * Revision 1.21 2004/10/16 23:24:08 ilyas
++ * Improved FileRead command support for LOG file playback (RecordTest on the board)
++ *
++ * Revision 1.20 2004/04/28 16:52:32 ilyas
++ * Added GDB frame processing
++ *
++ * Revision 1.19 2004/03/10 22:26:53 ilyas
++ * Added command-line parameter for IP port number.
++ * Added proxy remote termination
++ *
++ * Revision 1.18 2004/01/24 23:41:37 ilyas
++ * Added DIAG_DEBUG_CMD_LOG_SAMPLES debug command
++ *
++ * Revision 1.17 2003/11/19 02:25:45 ilyas
++ * Added definitions for LOG frame retransmission, time, ADSL2 plots
++ *
++ * Revision 1.16 2003/11/14 18:46:05 ilyas
++ * Added G992p3 debug commands
++ *
++ * Revision 1.15 2003/10/02 19:50:41 ilyas
++ * Added support for buffering data for AnnexI and statistical counters
++ *
++ * Revision 1.14 2003/09/03 19:45:11 ilyas
++ * To refuse connection with older protocol versions
++ *
++ * Revision 1.13 2003/08/30 00:12:39 ilyas
++ * Added support for running chip test regressions via DslDiags
++ *
++ * Revision 1.12 2003/08/12 00:19:28 ilyas
++ * Improved image downloading protocol.
++ * Added DEBUG command support
++ *
++ * Revision 1.11 2003/04/11 00:37:24 ilyas
++ * Added DiagProtoFrame definition
++ *
++ * Revision 1.10 2003/03/25 00:10:07 ilyas
++ * Added command for "long" BERT test
++ *
++ * Revision 1.9 2003/01/30 03:29:32 ilyas
++ * Added PHY_CFG support and fixed printing showtime counters
++ *
++ * Revision 1.8 2002/12/16 20:56:38 ilyas
++ * Added support for binary statuses
++ *
++ * Revision 1.7 2002/12/06 20:19:13 ilyas
++ * Added support for binary statuses and scrambled status strings
++ *
++ * Revision 1.6 2002/11/05 00:18:27 ilyas
++ * Added configuration dialog box for Eye tone selection.
++ * Added Centillium CRC workaround to AnnexC config dialog
++ * Bit allocation update on bit swap messages
++ *
++ * Revision 1.5 2002/07/30 23:23:43 ilyas
++ * Implemented DIAG configuration command for AnnexA and AnnexC
++ *
++ * Revision 1.4 2002/07/30 22:47:15 ilyas
++ * Added DIAG command for configuration
++ *
++ * Revision 1.3 2002/07/15 23:52:51 ilyas
++ * iAdded switch RJ11 pair command
++ *
++ * Revision 1.2 2002/04/25 17:55:51 ilyas
++ * Added mibGet command
++ *
++ * Revision 1.1 2002/04/02 22:56:39 ilyas
++ * Support DIAG connection at any time; BERT commands
++ *
++ *
++ ******************************************************************/
++
++#define LOG_PROTO_ID "*L"
++
++#define DIAG_PARTY_ID_MASK 0x01
++#define LOG_PARTY_CLIENT 0x01
++#define LOG_PARTY_SERVER 0x00
++
++#define DIAG_DATA_MASK 0x0E
++#define DIAG_DATA_LOG 0x02
++#define DIAG_DATA_EYE 0x04
++#define DIAG_DATA_LOG_TIME 0x08
++
++#define DIAG_DATA_EX 0x80
++#define DIAG_PARTY_ID_MASK_EX (DIAG_DATA_EX | DIAG_PARTY_ID_MASK)
++#define LOG_PARTY_SERVER_EX (DIAG_DATA_EX | LOG_PARTY_SERVER)
++
++#define DIAG_ACK_FRAME_ACK_MASK 0x000000FF
++#define DIAG_ACK_FRAME_RCV_SHIFT 8
++#define DIAG_ACK_FRAME_RCV_MASK 0x0000FF00
++#define DIAG_ACK_FRAME_RCV_PRESENT 0x00010000
++#define DIAG_ACK_TIMEOUT -1
++#define DIAG_ACK_LEN_INDICATION -1
++
++#define LOG_CMD_GDB 236
++#define LOG_CMD_PROXY 237
++#define LOG_CMD_RETR 238
++#define LOG_CMD_DEBUG 239
++#define LOG_CMD_BERT_EX 240
++#define LOG_CMD_CFG_PHY 241
++#define LOG_CMD_RESET 242
++#define LOG_CMD_SCRAMBLED_STRING 243
++#define LOG_CMD_EYE_CFG 244
++#define LOG_CMD_CONFIG_A 245
++#define LOG_CMD_CONFIG_C 246
++#define LOG_CMD_SWITCH_RJ11_PAIR 247
++#define LOG_CMD_MIB_GET 248
++#define LOG_CMD_LOG_STOP 249
++#define LOG_CMD_PING_REQ 250
++#define LOG_CMD_PING_RSP 251
++#define LOG_CMD_DISCONNECT 252
++#define LOG_CMD_STRING_DATA 253
++#define LOG_CMD_TEST_DATA 254
++#define LOG_CMD_CONNECT 255
++
++typedef struct _LogProtoHeader {
++ unsigned char logProtoId[2];
++ unsigned char logPartyId;
++ unsigned char logCommmand;
++} LogProtoHeader;
++
++#define LOG_FILE_PORT 5100
++#define LOG_MAX_BUF_SIZE 1400
++#define LOG_MAX_DATA_SIZE (LOG_MAX_BUF_SIZE - sizeof(LogProtoHeader))
++
++typedef struct {
++ LogProtoHeader diagHdr;
++ unsigned char diagData[LOG_MAX_DATA_SIZE];
++} DiagProtoFrame;
++
++#define DIAG_PROXY_TERMINATE 1
++
++#define DIAG_DEBUG_CMD_READ_MEM 1
++#define DIAG_DEBUG_CMD_SET_MEM 2
++#define DIAG_DEBUG_CMD_RESET_CONNECTION 3
++#define DIAG_DEBUG_CMD_RESET_PHY 4
++#define DIAG_DEBUG_CMD_RESET_CHIP 5
++#define DIAG_DEBUG_CMD_EXEC_FUNC 6
++#define DIAG_DEBUG_CMD_EXEC_ADSL_FUNC 7
++#define DIAG_DEBUG_CMD_WRITE_FILE 8
++#define DIAG_DEBUG_CMD_G992P3_DEBUG 9
++#define DIAG_DEBUG_CMD_G992P3_DIAG_MODE 10
++#define DIAG_DEBUG_CMD_CLEAR_TIME 11
++#define DIAG_DEBUG_CMD_PRINT_TIME 12
++#define DIAG_DEBUG_CMD_LOG_SAMPLES 13
++
++#define DIAG_DEBUG_CMD_PLAYBACK_STOP 14
++#define DIAG_DEBUG_CMD_PLAYBACK_RESUME 15
++
++#define DIAG_DEBUG_CMD_PRINT_STAT 21
++#define DIAG_DEBUG_CMD_CLEAR_STAT 22
++
++typedef struct {
++ unsigned short cmd;
++ unsigned short cmdId;
++ unsigned long param1;
++ unsigned long param2;
++ unsigned char diagData[1];
++} DiagDebugData;
++
++#define DIAG_TEST_CMD_LOAD 101
++#define DIAG_TEST_CMD_READ 102
++#define DIAG_TEST_CMD_WRITE 103
++#define DIAG_TEST_CMD_APPEND 104
++#define DIAG_TEST_CMD_TEST_COMPLETE 105
++
++#define DIAG_TEST_FILENAME_LEN 64
++
++typedef struct {
++ unsigned short cmd;
++ unsigned short cmdId;
++ unsigned long offset;
++ unsigned long len;
++ unsigned long bufPtr;
++ char fileName[DIAG_TEST_FILENAME_LEN];
++} DiagTestData;
++
++typedef struct {
++ unsigned long frStart;
++ unsigned long frNum;
++} DiagLogRetrData;
+diff -urN linux-2.6.8.1/bcmdrivers/broadcom/include/bcm963xx/adsldrv.h linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/include/bcm963xx/adsldrv.h
+--- linux-2.6.8.1/bcmdrivers/broadcom/include/bcm963xx/adsldrv.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/include/bcm963xx/adsldrv.h 2006-06-26 09:07:10.000000000 +0200
+@@ -0,0 +1,203 @@
++/*
++<:copyright-broadcom
++
++ Copyright (c) 2002 Broadcom Corporation
++ All Rights Reserved
++ No portions of this material may be reproduced in any form without the
++ written permission of:
++ Broadcom Corporation
++ 16215 Alton Parkway
++ Irvine, California 92619
++ All information contained in this document is Broadcom Corporation
++ company private, proprietary, and trade secret.
++
++:>
++*/
++/***************************************************************************
++ * File Name : AdslDrv.h
++ *
++ * Description: This file contains the definitions and structures for the
++ * Linux IOCTL interface that used between the user mode ADSL
++ * API library and the kernel ADSL API driver.
++ *
++ * Updates : 11/02/2001 lkaplan. Created.
++ ***************************************************************************/
++
++#if !defined(_ADSLDRV_H_)
++#define _ADSLDRV_H_
++
++#if defined(__cplusplus)
++extern "C" {
++#endif
++
++/* Incldes. */
++#include <bcmadsl.h>
++
++/* Defines. */
++#define DSL_IFNAME "dsl0"
++#define ADSLDRV_MAJOR 208 /* arbitrary unused value */
++
++#define ADSLIOCTL_CHECK \
++ _IOR(ADSLDRV_MAJOR, 0, ADSLDRV_STATUS_ONLY)
++#define ADSLIOCTL_INITIALIZE \
++ _IOWR(ADSLDRV_MAJOR, 1, ADSLDRV_INITIALIZE)
++#define ADSLIOCTL_UNINITIALIZE \
++ _IOR(ADSLDRV_MAJOR, 2, ADSLDRV_STATUS_ONLY)
++#define ADSLIOCTL_CONNECTION_START \
++ _IOWR(ADSLDRV_MAJOR, 3, ADSLDRV_STATUS_ONLY)
++#define ADSLIOCTL_CONNECTION_STOP \
++ _IOR(ADSLDRV_MAJOR, 4, ADSLDRV_STATUS_ONLY)
++#define ADSLIOCTL_GET_PHY_ADDR \
++ _IOR(ADSLDRV_MAJOR, 5, ADSLDRV_PHY_ADDR)
++#define ADSLIOCTL_SET_PHY_ADDR \
++ _IOWR(ADSLDRV_MAJOR, 6, ADSLDRV_PHY_ADDR)
++#define ADSLIOCTL_MAP_ATM_PORT_IDS \
++ _IOWR(ADSLDRV_MAJOR, 7, ADSLDRV_MAP_ATM_PORT)
++#define ADSLIOCTL_GET_CONNECTION_INFO \
++ _IOR(ADSLDRV_MAJOR, 8, ADSLDRV_CONNECTION_INFO)
++#define ADSLIOCTL_DIAG_COMMAND \
++ _IOR(ADSLDRV_MAJOR, 9, ADSLDRV_DIAG)
++#define ADSLIOCTL_GET_OBJ_VALUE \
++ _IOR(ADSLDRV_MAJOR, 10, ADSLDRV_GET_OBJ)
++#define ADSLIOCTL_START_BERT \
++ _IOR(ADSLDRV_MAJOR, 11, ADSLDRV_BERT)
++#define ADSLIOCTL_STOP_BERT \
++ _IOR(ADSLDRV_MAJOR, 12, ADSLDRV_STATUS_ONLY)
++#define ADSLIOCTL_CONFIGURE \
++ _IOR(ADSLDRV_MAJOR, 13, ADSLDRV_CONFIGURE)
++#define ADSLIOCTL_TEST \
++ _IOR(ADSLDRV_MAJOR, 14, ADSLDRV_TEST)
++#define ADSLIOCTL_GET_CONSTEL_POINTS \
++ _IOR(ADSLDRV_MAJOR, 15, ADSLDRV_GET_CONSTEL_POINTS)
++#define ADSLIOCTL_GET_VERSION \
++ _IOR(ADSLDRV_MAJOR, 16, ADSLDRV_GET_VERSION)
++#define ADSLIOCTL_SET_SDRAM_BASE \
++ _IOR(ADSLDRV_MAJOR, 17, ADSLDRV_SET_SDRAM_BASE)
++#define ADSLIOCTL_RESET_STAT_COUNTERS \
++ _IOR(ADSLDRV_MAJOR, 18, ADSLDRV_STATUS_ONLY)
++#define ADSLIOCTL_SET_OEM_PARAM \
++ _IOR(ADSLDRV_MAJOR, 19, ADSLDRV_SET_OEM_PARAM)
++#define ADSLIOCTL_START_BERT_EX \
++ _IOR(ADSLDRV_MAJOR, 20, ADSLDRV_BERT_EX)
++#define ADSLIOCTL_STOP_BERT_EX \
++ _IOR(ADSLDRV_MAJOR, 21, ADSLDRV_STATUS_ONLY)
++
++#define MAX_ADSLDRV_IOCTL_COMMANDS 22
++
++/* Typedefs. */
++typedef struct
++{
++ BCMADSL_STATUS bvStatus;
++} ADSLDRV_STATUS_ONLY, *PADSLDRV_STATUS_ONLY;
++
++typedef struct
++{
++ ADSL_FN_NOTIFY_CB pFnNotifyCb;
++ UINT32 ulParm;
++ adslCfgProfile *pAdslCfg;
++ BCMADSL_STATUS bvStatus;
++} ADSLDRV_INITIALIZE, *PADSLDRV_INITIALIZE;
++
++typedef struct
++{
++ ADSL_CHANNEL_ADDR ChannelAddr;
++ BCMADSL_STATUS bvStatus;
++} ADSLDRV_PHY_ADDR, *PADSLDRV_PHY_ADDR;
++
++typedef struct
++{
++ UINT16 usAtmFastPortId;
++ UINT16 usAtmInterleavedPortId;
++ BCMADSL_STATUS bvStatus;
++} ADSLDRV_MAP_ATM_PORT, *PADSLDRV_MAP_ATM_PORT;
++
++typedef struct
++{
++ ADSL_CONNECTION_INFO ConnectionInfo;
++ BCMADSL_STATUS bvStatus;
++} ADSLDRV_CONNECTION_INFO, *PADSLDRV_CONNECTION_INFO;
++
++typedef struct
++{
++ int diagCmd;
++ int diagMap;
++ int logTime;
++ int srvIpAddr;
++ int gwIpAddr;
++ BCMADSL_STATUS bvStatus;
++} ADSLDRV_DIAG, *PADSLDRV_DIAG;
++
++typedef struct
++{
++ char *objId;
++ int objIdLen;
++ char *dataBuf;
++ long dataBufLen;
++ BCMADSL_STATUS bvStatus;
++} ADSLDRV_GET_OBJ, *PADSLDRV_GET_OBJ;
++
++typedef struct
++{
++ unsigned long totalBits;
++ BCMADSL_STATUS bvStatus;
++} ADSLDRV_BERT, *PADSLDRV_BERT;
++
++typedef struct
++{
++ unsigned long totalSec;
++ BCMADSL_STATUS bvStatus;
++} ADSLDRV_BERT_EX, *PADSLDRV_BERT_EX;
++
++typedef struct
++{
++ adslCfgProfile *pAdslCfg;
++ BCMADSL_STATUS bvStatus;
++} ADSLDRV_CONFIGURE, *PADSLDRV_CONFIGURE;
++
++typedef struct
++{
++ unsigned long testCmd;
++ unsigned long xmtStartTone;
++ unsigned long xmtNumTones;
++ unsigned long rcvStartTone;
++ unsigned long rcvNumTones;
++ char *xmtToneMap;
++ char *rcvToneMap;
++ BCMADSL_STATUS bvStatus;
++} ADSLDRV_TEST, *PADSLDRV_TEST;
++
++typedef struct
++{
++ int toneId;
++ ADSL_CONSTELLATION_POINT *pointBuf;
++ int numPoints;
++ BCMADSL_STATUS bvStatus;
++} ADSLDRV_GET_CONSTEL_POINTS, *PADSLDRV_GET_CONSTEL_POINTS;
++
++typedef struct
++{
++ adslVersionInfo *pAdslVer;
++ BCMADSL_STATUS bvStatus;
++} ADSLDRV_GET_VERSION, *PADSLDRV_GET_VERSION;
++
++typedef struct
++{
++ unsigned long sdramBaseAddr;
++ BCMADSL_STATUS bvStatus;
++} ADSLDRV_SET_SDRAM_BASE, *PADSLDRV_SET_SDRAM_BASE;
++
++
++typedef struct
++{
++ int paramId;
++ void *buf;
++ int len;
++ BCMADSL_STATUS bvStatus;
++} ADSLDRV_SET_OEM_PARAM, *PADSLDRV_SET_OEM_PARAM;
++
++#if defined(__cplusplus)
++}
++#endif
++
++#endif // _ADSLDRV_H_
++
+diff -urN linux-2.6.8.1/bcmdrivers/broadcom/include/bcm963xx/atmapidrv.h linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/include/bcm963xx/atmapidrv.h
+--- linux-2.6.8.1/bcmdrivers/broadcom/include/bcm963xx/atmapidrv.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/include/bcm963xx/atmapidrv.h 2006-06-26 09:07:10.000000000 +0200
+@@ -0,0 +1,212 @@
++/*
++<:copyright-broadcom
++
++ Copyright (c) 2002 Broadcom Corporation
++ All Rights Reserved
++ No portions of this material may be reproduced in any form without the
++ written permission of:
++ Broadcom Corporation
++ 16215 Alton Parkway
++ Irvine, California 92619
++ All information contained in this document is Broadcom Corporation
++ company private, proprietary, and trade secret.
++
++:>
++*/
++/***************************************************************************
++ * File Name : AtmApiDrv.h
++ *
++ * Description: This file contains the definitions and structures for the
++ * Linux IOCTL interface that used between the user mode ATM
++ * API library and the kernel ATM API driver.
++ *
++ * Updates : 09/15/2000 lat. Created.
++ ***************************************************************************/
++
++#if !defined(_ATMAPIDRV_H_)
++#define _ATMAPIDRV_H_
++
++#if defined(__cplusplus)
++extern "C" {
++#endif
++
++/* Incldes. */
++#include <bcmatmapi.h>
++
++/* Defines. */
++#define ATMDRV_MAJOR 205 /* arbitrary unused value */
++
++#define ATMIOCTL_INITIALIZE \
++ _IOWR(ATMDRV_MAJOR, 0, ATMDRV_INITIALIZE)
++#define ATMIOCTL_UNINITIALIZE \
++ _IOR(ATMDRV_MAJOR, 1, ATMDRV_STATUS_ONLY)
++#define ATMIOCTL_GET_INTERFACE_ID \
++ _IOWR(ATMDRV_MAJOR, 2, ATMDRV_INTERFACE_ID)
++#define ATMIOCTL_GET_TRAFFIC_DESCR_TABLE_SIZE \
++ _IOR(ATMDRV_MAJOR, 3, ATMDRV_TRAFFIC_DESCR_TABLE_SIZE)
++#define ATMIOCTL_GET_TRAFFIC_DESCR_TABLE \
++ _IOWR(ATMDRV_MAJOR, 4, ATMDRV_TRAFFIC_DESCR_TABLE)
++#define ATMIOCTL_SET_TRAFFIC_DESCR_TABLE \
++ _IOWR(ATMDRV_MAJOR, 5, ATMDRV_TRAFFIC_DESCR_TABLE)
++#define ATMIOCTL_GET_INTERFACE_CFG \
++ _IOWR(ATMDRV_MAJOR, 6, ATMDRV_INTERFACE_CFG)
++#define ATMIOCTL_SET_INTERFACE_CFG \
++ _IOWR(ATMDRV_MAJOR, 7, ATMDRV_INTERFACE_CFG)
++#define ATMIOCTL_GET_VCC_CFG \
++ _IOWR(ATMDRV_MAJOR, 8, ATMDRV_VCC_CFG)
++#define ATMIOCTL_SET_VCC_CFG \
++ _IOWR(ATMDRV_MAJOR, 9, ATMDRV_VCC_CFG)
++#define ATMIOCTL_GET_VCC_ADDRS \
++ _IOWR(ATMDRV_MAJOR, 10, ATMDRV_VCC_ADDRS)
++#define ATMIOCTL_GET_INTERFACE_STATISTICS \
++ _IOWR(ATMDRV_MAJOR, 11, ATMDRV_INTERFACE_STATISTICS)
++#define ATMIOCTL_GET_VCC_STATISTICS \
++ _IOWR(ATMDRV_MAJOR, 12, ATMDRV_VCC_STATISTICS)
++#define ATMIOCTL_SET_INTERFACE_LINK_INFO \
++ _IOWR(ATMDRV_MAJOR, 13, ATMDRV_INTERFACE_LINK_INFO)
++#define ATMIOCTL_TEST \
++ _IOWR(ATMDRV_MAJOR, 14, ATMDRV_TEST)
++#define ATMIOCTL_OAM_LOOPBACK_TEST \
++ _IOWR(ATMDRV_MAJOR, 15, ATMDRV_OAM_LOOPBACK)
++
++
++#define MAX_ATMDRV_IOCTL_COMMANDS 16
++
++/* Typedefs. */
++typedef struct
++{
++ BCMATM_STATUS baStatus;
++} ATMDRV_STATUS_ONLY, *PATMDRV_STATUS_ONLY;
++
++typedef struct
++{ PATM_INITIALIZATION_PARMS pInit;
++ BCMATM_STATUS baStatus;
++} ATMDRV_INITIALIZE, *PATMDRV_INITIALIZE;
++
++typedef struct
++{
++ UINT8 ucPhyPort;
++ UINT8 ucReserved[3];
++ UINT32 ulInterfaceId;
++ BCMATM_STATUS baStatus;
++} ATMDRV_INTERFACE_ID, *PATMDRV_INTERFACE_ID;
++
++typedef struct
++{
++ UINT32 ulTrafficDescrTableSize;
++ BCMATM_STATUS baStatus;
++} ATMDRV_TRAFFIC_DESCR_TABLE_SIZE, *PATMDRV_TRAFFIC_DESCR_TABLE_SIZE;
++
++typedef struct
++{
++ PATM_TRAFFIC_DESCR_PARM_ENTRY pTrafficDescrTable;
++ UINT32 ulTrafficDescrTableSize;
++ BCMATM_STATUS baStatus;
++} ATMDRV_TRAFFIC_DESCR_TABLE, *PATMDRV_TRAFFIC_DESCR_TABLE;
++
++typedef struct
++{
++ UINT32 ulInterfaceId;
++ PATM_INTERFACE_CFG pInterfaceCfg;
++ BCMATM_STATUS baStatus;
++} ATMDRV_INTERFACE_CFG, *PATMDRV_INTERFACE_CFG;
++
++typedef struct
++{
++ ATM_VCC_ADDR VccAddr;
++ PATM_VCC_CFG pVccCfg;
++ BCMATM_STATUS baStatus;
++} ATMDRV_VCC_CFG, *PATMDRV_VCC_CFG;
++
++typedef struct
++{
++ UINT32 ulInterfaceId;
++ PATM_VCC_ADDR pVccAddrs;
++ UINT32 ulNumVccs;
++ UINT32 ulNumReturned;
++ BCMATM_STATUS baStatus;
++} ATMDRV_VCC_ADDRS, *PATMDRV_VCC_ADDRS;
++
++typedef struct
++{
++ UINT32 ulInterfaceId;
++ PATM_INTERFACE_STATS pStatistics;
++ UINT32 ulReset;
++ BCMATM_STATUS baStatus;
++} ATMDRV_INTERFACE_STATISTICS, *PATMDRV_INTERFACE_STATISTICS;
++
++typedef struct
++{
++ ATM_VCC_ADDR VccAddr;
++ PATM_VCC_STATS pVccStatistics;
++ UINT32 ulReset;
++ BCMATM_STATUS baStatus;
++} ATMDRV_VCC_STATISTICS, *PATMDRV_VCC_STATISTICS;
++
++typedef struct
++{
++ UINT32 ulInterfaceId;
++ ATM_INTERFACE_LINK_INFO InterfaceCfg;
++ BCMATM_STATUS baStatus;
++} ATMDRV_INTERFACE_LINK_INFO, *PATMDRV_INTERFACE_LINK_INFO;
++
++typedef struct
++{
++ ATM_VCC_ADDR VccAddr;
++ UINT32 ulNumToSend;
++ BCMATM_STATUS baStatus;
++} ATMDRV_TEST, *PATMDRV_TEST;
++
++typedef struct
++{
++ ATM_VCC_ADDR VccAddr;
++ UINT32 type;
++ BCMATM_STATUS baStatus;
++} ATMDRV_OAM_LOOPBACK, *PATMDRV_OAM_LOOPBACK;
++
++#define OAM_TYPE_FUNCTION_BYTE_OFFSET 0
++#define OAM_LB_INDICATION_BYTE_OFFSET 1
++#define OAM_LB_CORRELATION_TAG_BYTE_OFFSET 2
++#define OAM_LB_LOCATION_ID_BYTE_OFFSET 6
++#define OAM_LB_SRC_ID_BYTE_OFFSET 22
++#define OAM_LB_UNUSED_BYTE_OFFSET 38
++#define OAM_RDI_UNUSED_BYTE_OFFSET 1
++#define OAM_LB_CRC_BYTE_OFFSET 46
++#define OAM_RDI_CRC_BYTE_OFFSET 46
++#define OAM_LB_CORRELATION_TAG_LEN 4
++#define OAM_LB_LOCATION_ID_LEN 16
++#define OAM_LB_SRC_ID_LEN 16
++#define OAM_LB_UNUSED_BYTE_LEN 8
++#define OAM_RDI_UNUSED_BYTE_LEN 45
++#define OAM_LB_CRC_BYTE_LEN 2
++#define OAM_RDI_CRC_BYTE_LEN 2
++#define OAM_FAULT_MANAGEMENT_LB 0x18
++#define OAM_FAULT_MANAGEMENT_RDI 0x11
++#define OAM_FAULT_MANAGEMENT_LB_REQUEST 1
++#define OAM_FAULT_MANAGEMENT_LB_RESPOND 0
++#define OAM_FAULT_MANAGEMENT_CORRELATION_VAL 0xbcbcbcbc
++#define OAM_FAULT_MANAGEMENT_SRC_ID_3 0xffffffff
++#define OAM_FAULT_MANAGEMENT_SRC_ID_2 0xffffffff
++#define OAM_FAULT_MANAGEMENT_SRC_ID_1 0xffffffff
++#define OAM_FAULT_MANAGEMENT_SRC_ID_0 0xffffffff
++#define OAM_FAULT_MANAGEMENT_LOCATION_ID_3 0xffffffff
++#define OAM_FAULT_MANAGEMENT_LOCATION_ID_2 0xffffffff
++#define OAM_FAULT_MANAGEMENT_LOCATION_ID_1 0xffffffff
++#define OAM_FAULT_MANAGEMENT_LOCATION_ID_0 0xffffffff
++#define OAM_LB_UNUSED_BYTE_DEFAULT 0x6a
++#define OAM_LB_SEGMENT_TYPE 0
++#define OAM_LB_END_TO_END_TYPE 1
++#define OAM_F4_LB_SEGMENT_TYPE 2
++#define OAM_F4_LB_END_TO_END_TYPE 3
++#define RM_PROT_ID_OFFSET 0
++#define RM_MESSAGE_TYPE_OFFSET 1
++#define RM_PROTOCOL_ID 1
++#define RM_TYPE_DEFAULT 0x20 /* forward/source_generated/congested */
++#define RM_UNUSED_BYTES_OFFSET 2
++#define RM_UNUSED_BYTES_LEN 46
++#if defined(__cplusplus)
++}
++#endif
++
++#endif // _ATMAPIDRV_H_
++
+diff -urN linux-2.6.8.1/bcmdrivers/broadcom/include/bcm963xx/atmdiag.h linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/include/bcm963xx/atmdiag.h
+--- linux-2.6.8.1/bcmdrivers/broadcom/include/bcm963xx/atmdiag.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/include/bcm963xx/atmdiag.h 2006-06-26 09:07:10.000000000 +0200
+@@ -0,0 +1,764 @@
++/*
++<:copyright-broadcom
++
++ Copyright (c) 2002 Broadcom Corporation
++ All Rights Reserved
++ No portions of this material may be reproduced in any form without the
++ written permission of:
++ Broadcom Corporation
++ 16215 Alton Parkway
++ Irvine, California 92619
++ All information contained in this document is Broadcom Corporation
++ company private, proprietary, and trade secret.
++
++:>
++*/
++
++#ifndef __ATMDIAG_H__
++#define __ATMDIAG_H__
++
++//#define BRCM_6348
++
++#if defined(__cplusplus)
++extern "C" {
++#endif
++
++#define ATM_DIAG_FAIL -1
++#define ATM_DIAG_PASS 0
++#define ATM_REGADDR 0xFFFE4000
++#define ATM_REGSIZE 0x800
++#define ATM_TX_VPI_VCI_CAM_OFFSET 0x500
++#define ATM_RX_VPI_VCI_CAM_OFFSET 0x600
++#define ATM_TRAFFIC_SHAPER_OFFSET 0x700
++#define ATM_TX_STATUS_OFFSET 0x40c
++#define ATM_RX_STATUS_OFFSET 0x41c
++#define ATM_RX_AAL_STATUS_OFFSET 0x428
++#define ATM_MIP_COUNTERS_OFFSET 0x440
++#define ATM_UTOPIA_SETTING_OFFSET 0x42c
++#define ATM_ADSL_PHY_PORT_SETTING 0x15c
++#define UT_MAX_TDT_ENTRIES 2
++#define UT_MAX_MGMT_ENTRIES 4
++#define UT_LINE_RATE (146200000) /* 344811 cells/sec, CIT = 29ns */
++#define UT_CELL_RATE (53 * 8)
++#define UT_MIN_PCR_SCR 310 /* ~128Kbps */
++#define UT_MAX_PCR_SCR 344811 /* ~146.2Kpbs */
++#define UT_MIN_MBS 2
++#define UT_MAX_MBS 200000
++ //#ifdef BRCM_6348 currently, the driver only support 8 VCCS
++ //#define UT_MAX_VCCS 16
++ //#else
++#define UT_MAX_VCCS 8
++ //#endif
++#define UT_MAX_PHY_PORTS 2
++#define UT_BASE_PORT_NUMBER 1
++#define UT_MIN_QUEUE 1
++#define UT_MAX_QUEUE UT_MAX_VCCS
++#define UT_MULTI_QUEUE 1
++#define UT_SINGLE_QUEUE 0
++#define UT_MIN_PRIORITY 1
++#define UT_MAX_PRIORITY 4 /* priority ranging from 1-4 */
++#define UT_BUFFER_SIZE 20
++#define UT_MGMT_IDX 6
++#define UT_ENABLED 1
++#define UT_DISABLED 0
++#define UT_MAX_TD_INDEX UT_MAX_VCCS
++#define UT_SSTED_TRAILER_SIZE 8
++#define UT_DIALED_DIGITS 2
++#define UT_FREE_CELL_Q_SIZE 800
++#define UT_FREE_PKT_Q_SIZE 800
++#define UT_FREE_PKT_Q_BUF_SIZE 1600
++#define UT_RX_PKT_Q_SIZE 800
++#define UT_RX_CELL_Q_SIZE 800
++#define UT_AAL5_MAX_SDU_LENGTH 65535
++#define UT_TX_FIFO_PRIORITY 4
++#define UT_MIN_DATA_LEN 48
++#define UT_MAX_DATA_LEN 1500
++#define UT_BASE_VPI_NUMBER 0
++#define UT_MAX_VPI_NUMBER 256
++#define UT_BASE_VCI_NUMBER 32
++#define UT_MAX_VCI_NUMBER 65536
++#define UT_UTOPIA_MODE 1
++#define UT_ADSL_MODE 0
++#define UT_UTOPIA_ADSL_MODE 0x11 /* utopia port 0, adsl port 1 */
++#define UT_TOGGLE_DISPLAY_MODE 1
++#define UT_TOGGLE_CAPTURE_MODE 0
++#define UT_TOGGLE_VERIFICATION_MODE 2
++#define UT_TOGGLE_MODE_ON 1
++#define UT_TOGGLE_MODE_OFF 0
++#define UT_DUMP_TX_VPI_VCI_TABLE 1
++#define UT_DUMP_RX_VPI_VCI_TABLE 2
++#define UT_DISPLAY_STATS 1
++#define UT_CLEAR_STATS 2
++#define UT_TRAFFIC_DESCRIPTOR_DISPLAY 1
++#define UT_TRAFFIC_DESCRIPTOR_MODIFY 2
++#define UT_PORT_UTOPIA_SETTING 1
++#define UT_GLOBAL_UTOPIA_SETTING 2
++#define UT_DISPLAY_CAPTURED 0
++#define UT_ERASE_CAPTURED 1
++#define UT_CAPTURED_ERROR_STATS 2
++#define UT_PATTERN_INCREMENT 1
++#define UT_PATTERN_FIX 0
++#define UT_MODIFY_OPERATION 1
++#define UT_DISPLAY_OPERATION 0
++#define DIAG_ATM_MODULE "bcmatmtest"
++#define DIAG_ATM_PROC "/proc/atmtest"
++
++/* command is made up of 2_bytes_command|2_bytes_index */
++/* index is ranging from 0-7 for 8 VCs */
++#define UT_PROC_CMD_ADD_VC 1
++#define UT_PROC_CMD_DELETE_VC 2
++#define UT_PROC_CMD_START_SEND_VC 3
++#define UT_PROC_CMD_SEND_MULTI_VC 4
++#define UT_PROC_CMD_STOP_SEND_VC 5
++#define UT_PROC_CMD_CAPTURE 6
++#define UT_PROC_CMD_TOGGLE 7
++#define UT_PROC_CMD_GET_STATS 8
++#define UT_PROC_CMD_CLEAR_STATS 9
++#define UT_PROC_CMD_SEND_MULTI_PRIORITY 10
++#define UT_PROC_CMD_MODIFY_TRAFFIC_SHAPER 11
++#define UT_PROC_CMD_START_SEND_ALL_VC 12
++#define UT_PROC_CMD_ADSL_LOOPBACK 13
++#define UT_PROC_CMD_SEND_MANAGEMENT 14
++#define UT_PROC_CMD_ADD_MPVC 15
++#define UT_PROC_CMD_DELETE_MPVC 16
++#define UT_PROC_CMD_START_SEND_MPVC 17
++#define UT_PROC_CMD_UTOPIA_SET 18
++
++#define UT_OAM_LB_END_TO_END 10 /* was 1 */
++#define UT_OAM_LB_SEGMENT 11 /* was 2 */
++#define UT_OAM_RDI_END_TO_END 3
++#define UT_OAM_RDI_SEGMENT 4
++#define UT_VPC_RM_TYPE 5
++#define UT_VCC_RM_TYPE 6
++#define UT_OAM_CRC10_SOFTWARE 0
++#define UT_OAM_CRC10_HARDWARE 1
++#define UT_TOGGLE_DISPLAY 0
++#define UT_TOGGLE_CAPTURE 1
++#define UT_TOGGLE_VERIFY 2
++
++#define AP_REG_OFFSET_END 0x7ff
++#define AP_INDIRECT_RAM_ADDRESS_REG ATM_PROCESSOR_BASE + 0x7c0
++#define AP_INDIRECT_RAM_REG ATM_PROCESSOR_BASE + 0x7c4
++#define AP_IRQ_MASK AP_INTR_REGS_BASE+0x4
++#define AP_IRQ_STATUS AP_INTR_REGS_BASE
++#define AP_ROUTE_OAM_TO_RCQ 0
++#define AP_ROUTE_OAM_TO_MCF 1
++#define AP_IR_ASSERT 1
++#define AP_IR_DEASSERT 0
++#define AP_RX_STATUS_ERR_MASK 0x32ecc /* mask out idleCell, vc & unused */
++#define AP_RX_AAL_STATUS_ERR_MASK 0x3008 /* only look at rx router stats, discard */
++
++typedef struct utVccCfg {
++ UINT8 ulAalType;
++ UINT8 ulAtmVccCpcsAcceptCorruptedPdus;
++}UT_VCC_CFG, *pUT_VCC_CFG;
++
++typedef struct utTrafficDescrParmEntry {
++ UINT32 ulTrafficDescrIndex;
++ UINT32 ulTrafficDescrType;
++ UINT32 ulTrafficDescrParm1;
++ UINT32 ulTrafficDescrParm2;
++ UINT32 ulTrafficDescrParm3;
++ UINT32 ulTrafficDescrParm4;
++ UINT32 ulTrafficDescrParm5;
++ UINT32 ulTrafficDescrRowStatus;
++ UINT32 ulServiceCategory;
++}UT_TRAFFIC_DESCR_PARM_ENTRY,*pUT_TRAFFIC_DESCR_PARM_ENTRY;
++
++typedef struct utMultiSendInfo {
++ UINT32 len;
++ UINT8 pattern;
++ UINT8 dataByte;
++ UINT32 numSent;
++ UINT32 rate;
++ UINT8 circuitType;
++ UINT32 cellsPerPdu;
++ UINT32 delay;
++ UINT32 txCount;
++}UT_MULTISEND_INFO, *pUT_MULTISEND_INFO;
++
++typedef struct utUserSendInfo {
++ UINT32 len;
++ UINT8 incremental;
++ UINT8 dataByte;
++ UINT32 rate;
++ UINT32 aalType;
++ UINT32 delay;
++ UINT32 txCount; /* number of cells/pkt user want to send */
++ UINT8 multiQPriority;
++ UINT8 basePriority;
++ UINT8 numOfQueues;
++}UT_USER_SEND_INFO, *pUT_USER_SEND_INFO;
++
++typedef struct utVccAddrInfo {
++ ATM_VCC_ADDR vccAddr;
++ UINT8 priority; /* priority of the queue of this VCC */
++ UINT8 numOfQueues;
++}UT_VCC_ADDR_INFO, *pUT_VCC_ADDR_INFO;
++
++typedef struct utVccListInfo {
++ UINT32 handle;
++ UINT32 managementHandle;
++}UT_VCC_LIST_INFO, *pUT_VCC_LIST_INFO;
++
++typedef struct atmCaptureHdr {
++ UINT8 valid;
++ UINT8 vpi;
++ UINT16 vci;
++ UINT8 circuitType;
++ UINT8 cid;
++ UINT8 uuData8;
++ UINT8 uuData5;
++ UINT8 ucFlags;
++ UINT32 dataLen;
++ UINT8 *dataPtr;
++ UINT8 interface;
++} ATM_CAPTURE_HDR, *pATM_CAPTURE_HDR;
++
++typedef struct atmTxBufferHdr {
++ ATM_VCC_DATA_PARMS dataParms;
++ struct atmTxBufferHdr *next;
++} ATM_TX_BUFFER_HDR, *pATM_TX_BUFFER_HDR;
++
++typedef struct tx_buffer_list{
++ pATM_TX_BUFFER_HDR headPtr;
++ pATM_TX_BUFFER_HDR tailPtr;
++ UINT32 len;
++ UINT32 seqNumber;
++ UINT32 lastSent;
++ UINT32 sentInterval;
++ UINT32 cellsPerPdu;
++} ATM_TX_BUFFER_LIST, *pATM_TX_BUFFER_LIST;
++
++typedef struct atmTestError {
++ UINT32 total;
++ UINT32 data_err;
++ UINT32 data_length;
++ UINT32 sequence_err;
++ UINT32 aalCrcError;
++ UINT32 aalCpcsLen0;
++ UINT32 aalLenError;
++ UINT32 aalSduLenError;
++ UINT32 gfc;
++ UINT32 crc;
++ UINT32 pti;
++ UINT32 pmi_2sml;
++ UINT32 pmi_2big;
++ UINT32 vcam_mme;
++ UINT32 pne;
++ UINT32 came_1;
++ UINT32 came_0;
++ UINT32 dc_1;
++ UINT32 dc_0;
++ UINT32 ec_1;
++ UINT32 ec_0;
++ UINT32 aal5_drop_cell;
++ UINT32 routerDiscard_1;
++ UINT32 routerDiscard_0;
++ UINT32 camLkup;
++ UINT32 idle;
++ UINT32 hec;
++} ATM_TEST_ERROR, *pATM_TEST_ERROR;
++
++typedef struct atmMibStats {
++ UINT32 tx_aal5_0;
++ UINT32 tx_aal5_1;
++ UINT32 tx_aal0_0;
++ UINT32 tx_aal0_1;
++ UINT32 rx_aal5_0;
++ UINT32 rx_aal5_1;
++ UINT32 rx_aal0_0;
++ UINT32 rx_aal0_1;
++} ATM_MIB_STATS, *pATM_MIB_STATS;
++
++/* These are from TX status register; they are collected every 1 second interval */
++typedef struct atmTxStats {
++ UINT32 fifoFull; /* fifoFull_port0 */
++ UINT32 aal2bigErr;
++ UINT32 aal5LenErr;
++ UINT32 aal5MaxLenErr;
++ UINT32 droppedCellErr; /* tx aal or tx atm dropped cell port 0 */
++ UINT32 aal5PortNotEnableErr; /* pne_err_port0 */
++ UINT32 fifoFullErr; /* ff_err_port0 */
++ UINT32 aal5CountErr;
++} ATM_TX_STATS, *pATM_TX_STATS;
++
++/* these are from RX ATM and RX AAL status registers */
++typedef struct atmRxStats {
++ UINT32 gfcErr;
++ UINT32 crcErr;
++ UINT32 ptiErr;
++ UINT32 vcamMmErr; /* vcam_mme VCAM multiple match error */
++ UINT32 camLookupErr; /* came_port0 */
++ UINT32 portNotEnableErr; /* pne_err */
++ UINT32 discardErr; /* dc_port0 */
++ UINT32 errCellErr; /* ec_port0 */
++ UINT32 routerDrop; /* rxRouterStat_port0 */
++ UINT32 aalDrop; /* aal5d */
++#ifdef BRCM_6348
++ UINT32 overflowErr;
++ UINT32 uto2small;
++ UINT32 uto2big;
++#endif
++} ATM_RX_STATS, *pATM_RX_STATS;
++
++typedef struct atmStats
++{
++ ATM_MIB_STATS mibStats;
++ ATM_TX_STATS txStats;
++ ATM_RX_STATS rxStats;
++}ATM_STATS, *pATM_STATS;
++
++typedef struct atm_test_tx_info {
++ UINT32 index;
++ UINT32 len;
++ UINT32 lineTxInterval;
++ UINT32 count;
++ UINT8 incremental;
++ UINT8 dataByte;
++ UINT8 aalType;
++ UINT8 numOfQueues;
++ UINT8 basePriority;
++ UINT32 handle;
++ UINT32 rate;
++ UINT32 sending;
++ UINT8 managementType; /* f4, f5, rm */
++ UINT8 interleaveManagement;
++ UINT16 managementVpi;
++ UINT16 managementVci;
++ UINT16 managementCrc;
++ UINT32 managementInterface;
++} ATM_TEST_TX_INFO, *pATM_TEST_TX_INFO;
++
++typedef struct atm_test_info {
++ ATM_TEST_TX_INFO atmTestTxInfo[UT_MAX_VCCS+1]; /* one extra for f4 since it doesn't
++ have a vcc created, index is last one */
++ UT_TRAFFIC_DESCR_PARM_ENTRY ms_Tdt[UT_MAX_TD_INDEX];
++ UT_VCC_CFG ms_VccCfgs[UT_MAX_VCCS];
++ UT_VCC_ADDR_INFO ms_VccAddrs[UT_MAX_VCCS];
++ UINT32 commandStatus; /* command-2 bytes, status 2 bytes */
++ ATM_TEST_ERROR m_ucTestError[UT_MAX_VCCS+1];
++ ATM_STATS atmStats;
++ UINT8 displayData; /* current mode: 0=disable, 1=enable */
++ UINT8 captureData; /* current mode: 0=disable, 1=enable */
++ UINT8 verifyData; /* current mode: 0=disable, 1=enable */
++ UINT32 pduSent[UT_MAX_VCCS+1]; /* one extra for f4 */
++ UINT32 pduReceived[UT_MAX_VCCS+1];
++ UINT32 multiPriority;
++} ATM_TEST_INFO, *pATM_TEST_INFO;
++
++typedef struct atm_verfication_info {
++ int seqNumber;
++ UINT8 incremental;
++ UINT8 dataByte;
++ int len;
++} ATM_VERIFICATION_INFO, *pATM_VERIFICATION_INFO;
++
++typedef struct atm_data_struct {
++ PATM_VCC_DATA_PARMS data;
++ ATM_VCC_ADDR vccAddr;
++} ATM_DATA_STRUCT, *PATM_DATA_STRUCT;
++
++typedef struct atmDiagCb {
++ ATM_TRAFFIC_DESCR_PARM_ENTRY ms_Tdt[UT_MAX_TD_INDEX];
++ ATM_VCC_CFG ms_VccCfgs[UT_MAX_VCCS];
++ UT_VCC_ADDR_INFO ms_VccAddrs[UT_MAX_VCCS];
++ UINT32 ms_multiPriority[UT_MAX_VCCS];
++ ATM_TX_BUFFER_LIST mTxHdrQ[UT_MAX_VCCS+1]; /* tx Q; an extra one for f4 cells */
++ UT_VCC_LIST_INFO m_ulVccList[UT_MAX_VCCS+1]; /* tx Q; an extra one for f4 cells */
++ UINT32 managementHandle_port0;
++ UINT32 managementHandle_port1;
++ UINT32 rxTaskId;
++ UINT32 txTaskId;
++ UINT32 statsTaskId;
++ UINT32 rxTaskSem; /* protect Rx Q */
++ UINT32 txTaskSem; /* protect Tx Q */
++ UINT32 rxQMuSem; /* rx task semphore */
++ UINT32 txQMuSem; /* tx task semphore */
++ UINT32 txTaskExit; /* clean up purpose */
++ UINT32 rxTaskExit; /* clean up purpose */
++ ATM_DATA_STRUCT m_pDpHead; /* rx Q */
++ ATM_DATA_STRUCT m_pDpTail; /* rx Q */
++ UINT8 displayData; /* 1 to display rx data on screen; default is 0 */
++ UINT8 captureData;
++ UINT8 verifyData;
++ ATM_CAPTURE_HDR m_ulData[UT_BUFFER_SIZE];
++ int m_ulBufferPosition;
++ UINT32 m_ulCurSeqNumber;
++ ATM_TEST_ERROR m_ucTestError[UT_MAX_VCCS+1];
++ ATM_STATS m_atmStats;
++ ATM_VERIFICATION_INFO dataVerficationInfo[UT_MAX_VCCS];
++ UINT8 txStop;
++} ATM_DIAG_CB, *pATM_DIAG_CB;
++
++/* 0xfffe15c */
++typedef union phyLastDescConfig {
++ struct {
++ UINT32 unused:22;
++ UINT32 rxCfg:2;
++ UINT32 unused1:2;
++ UINT32 txCfg:2;
++ UINT32 numRxDesc:2;
++ UINT32 numTxDesc:2;
++ }bit;
++ UINT32 reg;
++} PHY_LAST_DESC_CONFIG, *pPHY_LAST_DESC_CONFIG;
++
++/* 0xfffe4500-0xfffe45ff */
++typedef union txAtmVpiVciTable {
++ struct {
++ UINT32 unused:6;
++ UINT32 swFlags:1;
++ UINT32 crcEnable:1;
++ UINT32 vpi: 8;
++ UINT32 vci:16;
++ }bit;
++ UINT32 entry;
++} TX_ATM_VPI_VCI_TABLE, *pTX_ATM_VPI_VCI_TABLE;
++
++/* 0xfffe4600-0xfffe46ff */
++typedef union RxAtmVpiVciTable {
++ struct {
++ UINT32 unused:6;
++ UINT32 valid:1;
++ UINT32 vpi:8;
++ UINT32 vci:16;
++ UINT32 port:1;
++ } camSide; /* even; */
++ struct {
++ UINT32 unused:21;
++ UINT32 userDataIR:1; /* assert IR for user data immediate response */
++ UINT32 oamIR:1; /* assert IR for OAM immediate response */
++ UINT32 rmIR:1; /* assert IR for RM immediate response */
++ UINT32 vcId:3; /* VCID */
++ UINT32 userDataCrcEnable:1;
++ UINT32 oamRouteCode:1; /* 0=route to rx cell q; 1= route to rx mips cell fifo */
++ UINT32 udrc:1; /* User Data Routing Code */
++ UINT32 circuitType:2;
++ } ramSide; /* odd; */
++ UINT32 entry;
++} RX_ATM_VPI_VCI_TABLE, *pRX_ATM_VPI_VCI_TABLE;
++
++/* 6345; 0xfffe4300- 0xfffe43ff */
++typedef union atmIntrRegs {
++ struct {
++ UINT32 unused:20;
++ UINT32 vcamMm:1; /* RX VCAM multiple match */
++ UINT32 rxRtDc:1; /* Rx Router discard cell due to full rx buffer */
++ UINT32 rpqIr:1; /* Receive Packet Queue got a packet tagged with immediate response */
++ UINT32 rcqIr:1; /* Receive Cell Queue got a cell tagged with immediate response */
++ UINT32 rpqWd:1; /* RX Pkt Q watchdog- no pkt rxed for the duration defined in RCQ wd timer */
++ UINT32 rcqWd:1; /* RX Cell Q watchdog */
++ UINT32 mibHf:1; /* one or more of the MIB coutners is half full */
++ UINT32 fpqAe:1; /* Free Packet Queue almost empty- has fewer buffers than FPQ watermark */
++ UINT32 rpqAf:1; /* Rx Packet Queue has exceeded RPQ watermark */
++ UINT32 fcqAe:1; /* Free Cell Queue almost Empty */
++ UINT32 rcqAf:1; /* Rx Cell Q almost full */
++ UINT32 txs:1; /* Tx SDRAM Interrupt- one of the TX SDRAM sub-channels intr is set */
++ }statusMaskBit; /* status & interrupt mask */
++#ifdef BRCM_6348
++ struct {
++ UINT32 unused1:8;
++ UINT32 sdqMask:8; /* TX SDRAM watchdog timer interrupt */
++ UINT32 unused:4;
++ UINT32 irqMask:12;
++ }irqMaskBit;
++ struct {
++ UINT32 unused:28;
++ UINT32 sdWd:4; /* TX SDRAM Watchdog */
++ }txSdramValue;
++#else /* 6345 */
++ struct {
++ UINT32 unused:16;
++ UINT32 irqMask:16;
++ }irqMaskBit;
++#endif /* BRCM_6348 */
++ struct {
++ UINT32 fcqAeWm:16; /* Free Cell Q almost empty watermark */
++ UINT32 rcqAfWm:16; /* Rx Cell Q almost full watermark */
++ }rxCellQBit;
++ struct {
++ UINT32 fpqAeWm:16; /* Free Packet Q almost empty watermark */
++ UINT32 rpqAfWm:16; /* Rx Paket Q almost full watermark */
++ }rxPktQBit;
++ struct {
++ UINT32 pktWdTo:16; /* Watchdog timeout value in 50 uSec increments */
++ UINT32 cellWdTo:16; /* Watchdog timeout value in 50 uSec increments */
++ }rxWdTimer;
++} ATM_INTR_REGS, *pATM_INTR_REGS;
++
++/* 0xfffe4700-0xfffe47ff */
++typedef union atmShaperCtrlReg {
++#ifdef BRCM_6348
++ struct {
++ UINT32 unused:7;
++ UINT32 rst:1; /* reset shaper */
++ UINT32 pcr:12; /* peak cell rate */
++ UINT32 mpEn:1; /* Multi-priority enabled */
++ UINT32 priority:2; /* source scheduling sub-priority */
++ UINT32 mcrEnable:1;/* Minimum Cell Rate Enabled */
++ UINT32 alg:2; /* source shaping algorithm */
++ UINT32 pid:1; /* Source destination Port ID */
++ UINT32 vcid:4; /* source VC ID */
++ UINT32 enable:1; /* source shaper enable */
++ }bit;
++#else /* 6345 */
++ struct {
++ UINT32 unused:9;
++ UINT32 rst:1; /* reset shaper */
++ UINT32 pcr:12; /* peak cell rate */
++ UINT32 mpEn:1; /* Multi-priority enabled */
++ UINT32 priority:2; /* source scheduling sub-priority */
++ UINT32 alg:2; /* source shaping algorithm */
++ UINT32 pid:1; /* Source destination Port ID */
++ UINT32 vcid:3; /* source VC ID */
++ UINT32 enable:1; /* source shaper enable */
++ }bit;
++#endif /* BRCM_6348 */
++ UINT32 entry;
++} ATM_SHAPER_CTRL_REG, *pATM_SHAPER_CTRL_REG;
++
++typedef union atmShaperVbrReg {
++ struct {
++ UINT32 unused:1;
++ UINT32 bt:19;
++ UINT32 scr:12;
++ }bit;
++ UINT32 entry;
++} ATM_SHAPER_VBR_REG, *pATM_SHAPER_VBR_REG;
++
++#ifdef BRCM_6348
++typedef union atmShaperMcrReg {
++ struct {
++ UINT32 unused:20;
++ UINT32 mcr:12;
++ }bit;
++ UINT32 entry;
++} ATM_SHAPER_MCR_REG, *pATM_SHAPER_MCR_REG;
++#endif /* BRCM_6348 */
++
++typedef union atmCellHdr {
++ struct {
++ UINT32 gfc:4;
++ UINT32 msb_vpi:4;
++ UINT32 vpi:4;
++ UINT32 msb_vci:4;
++ UINT32 vci:8;
++ UINT32 lsb_vci:4;
++ UINT32 pt:3;
++ UINT32 clp:1;
++ }bit;
++ UINT32 word1;
++} ATM_CELL_HDR, *pATM_CELL_HDR;
++#define ATM_RX_AAL_STATUS_ERROR_MASK_PORT0 0x108
++
++/* 0xfffe4428 */
++typedef union atmRxAalStatusReg {
++ struct {
++ UINT32 unused:22;
++ UINT32 rxRouterStat_port1:1; /* RX cells dropped due to full cell buffer; */
++ UINT32 rxRouterStat_port0:1; /* bit 8=port 0 fifo rx drop cell */
++ UINT32 aal0ccnt_port1:1; /* aal0 cell count has been incremented; bit 4=port0 */
++ UINT32 aal0ccnt_port0:1; /* aal0 cell count has been incremented; bit 4=port0 */
++ UINT32 aal5ccnt_port1:1; /* aal5 cell count has been incremented; bit 4=port0 */
++ UINT32 aal5ccnt_port0:1; /* aal5 cell count has been incremented; bit 4=port0 */
++ UINT32 aal5d:1; /* aal5 dropped cells */
++ UINT32 aal5p:1; /* aal5 pdu received */
++ UINT32 aalxp:1; /* non aal5 received */
++ UINT32 aal5c:1; /* aal5 received cells */
++ }bit;
++ UINT32 reg;
++} ATM_RX_AAL_STATUS_REG, *pATM_RX_AAL_STATUS_REG;
++/* 0xfffe441c */
++#define ATM_RX_STATUS_ERROR_MASK_PORT0 0x32354
++typedef union atmRxStatusReg {
++ struct {
++ UINT32 unused:14;
++ UINT32 gfc_err:1; /* non zero gfc detected */
++ UINT32 crc_err:1; /* CRC-10 error detected on OAM/RM cells */
++#ifdef BRCM_6348
++ UINT32 rx_flow_err:1; /* Receive cell dropped by RXATM layer 'cause RX cell FIFO full */
++#else /* 6345 */
++ UINT32 unused1:1;
++#endif
++ UINT32 idle_err:1; /* Idle cell detected */
++ UINT32 pti_err:1; /* PTI Error detected (i.e. PT=binary 111) */
++#ifdef BRCM_6348
++ UINT32 unused2:1;
++ UINT32 uto2small:1;/* Too small of a cell from RX Utopia */
++ UINT32 uto2big:1; /* Too big of a cell from RX Utopia */
++#else /* BRCM_6345 */
++ UINT32 unused2:3;
++#endif
++ UINT32 vcam_mme:1; /* VCAM multiple match error */
++ UINT32 pne_err:1; /* port not enable error */
++ UINT32 came_port1:1; /* PER port cam lookup error; bit6=port 0 */
++ UINT32 came_port0:1; /* PER port cam lookup error; bit6=port 0 */
++ UINT32 dc_port1:1; /* per port dropped cell; bit 4= port 0 */
++ UINT32 dc_port0:1; /* per port dropped cell; bit 4= port 0 */
++ UINT32 ec_port1:1; /* per port erred cell; bit 2=port 0 */
++ UINT32 ec_port0:1; /* per port erred cell; bit 2=port 0 */
++ UINT32 vc_port1:1; /* per port valid cell; bit 0=port 0 */
++ UINT32 vc_port0:1; /* per port valid cell; bit 0=port 0 */
++ }bit;
++ UINT32 reg;
++} ATM_RX_STATUS_REG, *pATM_RX_STATUS_REG;
++
++#define ATM_TX_STATUS_ERROR_MASK_PORT0 0x41e80c54
++typedef union atmTxStatusReg {
++ struct {
++ UINT32 fifoFull_port1:1; /* per port FIFO Full Status (1=full) */
++ UINT32 fifoFull_port0:1; /* per port FIFO Full Status (1=full) */
++ UINT32 unused:1;
++ UINT32 aal0_port1:1; /* aal0_port1 tx */
++ UINT32 aal0_port0:1; /* aal0_port0 tx */
++ UINT32 aal5_port1:1; /* aal5_port1 tx */
++ UINT32 aal5_port0:1; /* aal5_port0 tx */
++ UINT32 aal2big:1; /* aal too big cell input */
++ UINT32 aal5liErr:1;/* aal5 length indicator error */
++ UINT32 aal5mlErr:1;/* aal5 max length error */
++ UINT32 aal5ctErr:1;/* aal5 count error */
++ UINT32 unused1:1;
++ UINT32 aal5d:1; /* aal5 drop cell */
++ UINT32 aal5p:1; /* aal5 pdu passed */
++ UINT32 aalxc:1; /* non aal5 cell passed */
++ UINT32 aal5c:1; /* aal cell passed */
++ UINT32 dropCell_port1:1; /* tx aal or tx atm dropped cell */
++ UINT32 dropReq_port1:1; /* one of the port dropped request */
++ UINT32 scheCell_port1:1; /* per port scheduled cell */
++ UINT32 sit_port1:1; /* per port schedule interval timer count event */
++ UINT32 dropCell_port0:1; /* tx aal or tx atm dropped cell */
++ UINT32 dropReq_port0:1; /* one of the port dropped request */
++ UINT32 scheCell_port0:1; /* per port scheduled cell */
++ UINT32 sit_port0:1; /* per port schedule interval timer count event */
++ UINT32 pne_err_port1:1; /* port not enable error */
++ UINT32 pne_err_port0:1; /* port not enable error */
++ UINT32 ff_err_port1:1; /* fifo full error */
++ UINT32 ff_err_port0:1; /* fifo full error */
++ UINT32 dc_port1:1; /* per port dropped cell */
++ UINT32 dc_port0:1; /* per port dropped cell */
++ UINT32 pc_port1:1; /* per port processed cell */
++ UINT32 pc_port0:1; /* per port processed cell */
++ }bit;
++ UINT32 reg;
++} ATM_TX_STATUS_REG, *pATM_TX_STATUS_REG;
++
++
++typedef union atmTxHdrReg {
++ struct {
++ UINT32 unused1:14;
++ UINT32 aal5SwTrailer:1; /* software trailer enable */
++ UINT32 schedCrst_1:1; /* scheuler reset */
++ UINT32 schedCrst_0:1;
++ UINT32 unused:1;
++ UINT32 haltShpt_1:1; /* halt shaper, used for dynamic configuration of shaper */
++ UINT32 haltShpt_0:1;
++ UINT32 altGFC:4; /* alternate GFC value */
++ UINT32 altGFCen_1:1;
++ UINT32 altGFCen_0:1; /* alternate GFC mode enable */
++ UINT32 fRst_1:1;
++ UINT32 fRst_0:1;
++ UINT32 oamCrcEn_1:1;
++ UINT32 oamCrcEn_0:1;
++ UINT32 txEn_1:1;
++ UINT32 txEn_0:1;
++ }bit;
++ UINT32 reg;
++} ATM_TX_HDR_CFG_REG, *pATM_TX_HDR_CFG_REG;
++
++typedef union rxAalError {
++ struct {
++ UINT8 crc:1; /* aal5 CRC error */
++ UINT8 cpcsLen0:1; /* aal5 cpcsLen error */
++ UINT8 length:1; /* aal5 len error */
++ UINT8 maxSduExceed:1; /* max sdu exceed error */
++ UINT8 unused:4;
++ }bit;
++ UINT8 entry;
++} RX_AAL_ERROR;
++
++typedef union rxAtmError {
++ struct {
++ UINT8 pne:1; /* port not enable error */
++ UINT8 hec:1; /* HEC error */
++ UINT8 pti:1; /* pti error */
++ UINT8 idle:1; /* idle rx */
++ UINT8 camLkup:1; /* cam look up error */
++ UINT8 unused:1;
++ UINT8 oamCrc:1; /* oam crc */
++ UINT8 gfc:1; /* gfc error */
++ }bit;
++ UINT8 entry;
++} RX_ATM_ERROR;
++
++/* 0xfffe442c */
++typedef union atmUtopiaCfg {
++ struct {
++ UINT32 unused:26;
++ UINT32 rxLevel2:1; /* when set=level 2, when 0=level 1 */
++ UINT32 rxEn:1; /* enable RX Utopia Operation */
++ UINT32 unused1:2;
++ UINT32 txLevel2:1; /* when set=level 2, when 0=level 1 */
++ UINT32 txEn:1; /* enable TX Utopia Operation */
++ }bit;
++ UINT32 entry;
++} ATM_UTOPIA_CFG, *pATM_UTOPIA_CFG;
++
++typedef union portSchedulerCfg {
++ struct {
++ UINT32 cit:16;
++ UINT32 unused:12;
++ UINT32 mode:2;
++ UINT32 arb:1;
++ UINT32 en:1;
++ }bit;
++ UINT32 entry;
++} ATM_PORT_SCHEDULER_CFG, *pATM_PORT_SCHEDULER_CFG;
++
++/* memory map operation definition */
++typedef struct atm_regs {
++ int kmem_fd;
++ char *mmap_addr;
++ unsigned long addr;
++ unsigned int size;
++ unsigned int offset;
++} atm_regs;
++
++int getVccNextIndex(void);
++void removeVccIndex(int index);
++int isVpiVciExisted(UINT32 interface, UINT16 vpi, UINT16 vci);
++void atmDiagInit(void);
++BCMATM_STATUS bcmAtmDiagInit(void);
++BCMATM_STATUS bcmAtmDiagUnInit(void);
++BCMATM_STATUS bcmAtmAddVccCommand(pUT_VCC_ADDR_INFO pVccAddrs, pUT_VCC_CFG pVccCfg,
++ pUT_TRAFFIC_DESCR_PARM_ENTRY pTd);
++BCMATM_STATUS bcmAtmSendVccCommand(pATM_TEST_TX_INFO pAtmInfo);
++BCMATM_STATUS bcmAtmCaptureCommand(int mode);
++BCMATM_STATUS bcmAtmSendManagementCommand(pATM_TEST_TX_INFO pAtmInfo);
++BCMATM_STATUS bcmAtmDeleteVccCommand(pUT_VCC_ADDR_INFO pVccAddrs);
++BCMATM_STATUS bcmAtmSendAllVccsCommand(pATM_TEST_TX_INFO pAtmInfo);
++BCMATM_STATUS bcmAtmSendMultiPriorityCommand(pATM_TEST_TX_INFO pAtmInfo);
++BCMATM_STATUS bcmAtmSendLoopbackCommand(UINT8 mode);
++BCMATM_STATUS bcmAtmAddMPVccCommand(pUT_VCC_ADDR_INFO pVccAddrs, pUT_VCC_CFG pVccCfg,
++ pUT_TRAFFIC_DESCR_PARM_ENTRY pTd);
++BCMATM_STATUS bcmAtmDeleteMPVccCommand(pUT_VCC_ADDR_INFO pVccAddrs);
++BCMATM_STATUS bcmAtmSendMPVccCommand(pATM_TEST_TX_INFO pAtmInfo);
++BCMATM_STATUS bcmAtmSendMultiPriorityCommand(pATM_TEST_TX_INFO pAtmInfo);
++BCMATM_STATUS bcmAtmModifyTDCommand(pUT_TRAFFIC_DESCR_PARM_ENTRY pTD, UINT32 index);
++int bcmAtmGetStatsCommand(int reset);
++int bcmAtmToggleVerifyCommand(void);
++int bcmAtmToggleCaptureCommand(void);
++int bcmAtmToggleDisplayCommand(void);
++int bcmAtmStopTxCommand(void);
++int isVpiVciExisted(UINT32 interface, UINT16 vpi, UINT16 vci);
++int bcmDiag_unmapregs(atm_regs *mapregs);
++atm_regs *bcmDiag_mapregs(unsigned long addr, int size);
++int bcmDiagGetVerificationStats(int vcc,char *pResult);
++void bcmDiagClearSARstats(void);
++void bcmDiagReadSARstats(int parm);
++int bcmDiagGetSARStats(char *pResult);
++#if defined(__cplusplus)
++}
++#endif
++
++#endif
+diff -urN linux-2.6.8.1/bcmdrivers/broadcom/include/bcm963xx/atmosservices.h linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/include/bcm963xx/atmosservices.h
+--- linux-2.6.8.1/bcmdrivers/broadcom/include/bcm963xx/atmosservices.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/include/bcm963xx/atmosservices.h 2006-06-26 09:07:10.000000000 +0200
+@@ -0,0 +1,98 @@
++/*
++<:copyright-broadcom
++
++ Copyright (c) 2002 Broadcom Corporation
++ All Rights Reserved
++ No portions of this material may be reproduced in any form without the
++ written permission of:
++ Broadcom Corporation
++ 16215 Alton Parkway
++ Irvine, California 92619
++ All information contained in this document is Broadcom Corporation
++ company private, proprietary, and trade secret.
++
++:>
++*/
++//**************************************************************************
++// File Name : BcmAtmApi.h
++//
++// Description: This file contains the definitions, structures and function
++// prototypes for the Broadcom Asynchronous Transfer Mode (ATM)
++// Application Program Interface (API).
++//
++// Updates : 09/15/2000 lat. Created.
++//**************************************************************************
++
++#if !defined(_ATMOSSERVICES_H_)
++#define _ATMOSSERVICES_H_
++
++#if defined(__cplusplus)
++extern "C" {
++#endif
++
++//**************************************************************************
++// Constant Definitions
++//**************************************************************************
++#define RTN_SUCCESS 0
++#define RTN_ERROR 1
++#define USE_CURRENT_THREAD_PRIORITY 0
++
++//**************************************************************************
++// Type Definitions
++//**************************************************************************
++typedef void (*FN_GENERIC) (void *);
++typedef struct AtmOsFuncs
++{
++ FN_GENERIC pfnAlloc;
++ FN_GENERIC pfnFree;
++ FN_GENERIC pfnDelay;
++ FN_GENERIC pfnCreateSem;
++ FN_GENERIC pfnRequestSem;
++ FN_GENERIC pfnReleaseSem;
++ FN_GENERIC pfnDeleteSem;
++ FN_GENERIC pfnDisableInts;
++ FN_GENERIC pfnEnableInts;
++ FN_GENERIC pfnInvalidateCache;
++ FN_GENERIC pfnFlushCache;
++ FN_GENERIC pfnGetTopMemAddr;
++ FN_GENERIC pfnBlinkLed;
++ FN_GENERIC pfnGetSystemTick;
++ FN_GENERIC pfnStartTimer;
++ FN_GENERIC pfnPrintf;
++} ATM_OS_FUNCS, *PATM_OS_FUNCS;
++
++//**************************************************************************
++// Function Prototypes
++//**************************************************************************
++
++UINT32 AtmOsInitialize( PATM_OS_FUNCS pFuncs );
++char *AtmOsAlloc( UINT32 ulSize );
++void AtmOsFree( char *pBuf );
++UINT32 AtmOsCreateThread( char *pszName, void *pFnEntry, UINT32 ulFnParm,
++ UINT32 ulPriority, UINT32 ulStackSize, UINT32 *pulThreadId );
++UINT32 AtmOsCreateSem( UINT32 ulInitialState );
++UINT32 AtmOsRequestSem( UINT32 ulSem, UINT32 ulTimeoutMs );
++void AtmOsReleaseSem( UINT32 ulSem );
++void AtmOsDeleteSem( UINT32 ulSem );
++UINT32 AtmOsDisableInts( void );
++void AtmOsEnableInts( UINT32 ulLevel );
++void AtmOsDelay( UINT32 ulTimeoutMs );
++UINT32 AtmOsTickGet( void );
++UINT32 AtmOsTickCheck( UINT32 ulWaitTime, UINT32 ulMsToWait );
++void AtmOsInvalidateCache( void *pBuf, UINT32 ulLength );
++void AtmOsFlushCache( void *pBuf, UINT32 ulLength );
++char *AtmOsTopMemAddr( void );
++void AtmOsBlinkLed( void );
++UINT32 AtmOsInitDeferredHandler( void *pFnEntry, UINT32 ulFnParm,
++ UINT32 ulTimeout );
++void AtmOsScheduleDeferred( UINT32 ulHandle );
++void AtmOsUninitDeferredHandler( UINT32 ulHandle );
++UINT32 AtmOsStartTimer( void *pFnEntry, UINT32 ulFnParm, UINT32 ulTimeout );
++void AtmOsPrintf( char *, ... );
++
++#if defined(__cplusplus)
++}
++#endif
++
++#endif // _ATMOSSERVICES_H_
++
+diff -urN linux-2.6.8.1/bcmdrivers/broadcom/include/bcm963xx/bcm_common.h linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/include/bcm963xx/bcm_common.h
+--- linux-2.6.8.1/bcmdrivers/broadcom/include/bcm963xx/bcm_common.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/include/bcm963xx/bcm_common.h 2006-06-26 09:07:10.000000000 +0200
+@@ -0,0 +1,48 @@
++/*
++<:copyright-broadcom
++
++ Copyright (c) 2004 Broadcom Corporation
++ All Rights Reserved
++ No portions of this material may be reproduced in any form without the
++ written permission of:
++ Broadcom Corporation
++ 16215 Alton Parkway
++ Irvine, California 92619
++ All information contained in this document is Broadcom Corporation
++ company private, proprietary, and trade secret.
++
++:>
++*/
++
++#ifndef __BCM_COMMON_H
++#define __BCM_COMMON_H
++
++#if defined(CONFIG_BCM96338)
++#include <6338_common.h>
++#endif
++#if defined(CONFIG_BCM96345)
++#include <6345_common.h>
++#endif
++#if defined(CONFIG_BCM96348)
++#include <6348_common.h>
++#endif
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,5) /* starting from 2.4.5 */
++#define skb_dataref(x) (&skb_shinfo(x)->dataref)
++#else
++#define skb_dataref(x) skb_datarefp(x)
++#endif
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,19) /* starting from 2.4.19 */
++#define VIRT_TO_PHY(a) (((unsigned long)(a)) & 0x1fffffff)
++#else
++#define VIRT_TO_PHY virt_to_phys
++#endif
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++#define __save_and_cli save_and_cli
++#define __restore_flags restore_flags
++#endif
++
++#endif
++
+diff -urN linux-2.6.8.1/bcmdrivers/broadcom/include/bcm963xx/bcm_map.h linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/include/bcm963xx/bcm_map.h
+--- linux-2.6.8.1/bcmdrivers/broadcom/include/bcm963xx/bcm_map.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/include/bcm963xx/bcm_map.h 2006-06-26 09:07:10.000000000 +0200
+@@ -0,0 +1,31 @@
++/*
++<:copyright-broadcom
++
++ Copyright (c) 2004 Broadcom Corporation
++ All Rights Reserved
++ No portions of this material may be reproduced in any form without the
++ written permission of:
++ Broadcom Corporation
++ 16215 Alton Parkway
++ Irvine, California 92619
++ All information contained in this document is Broadcom Corporation
++ company private, proprietary, and trade secret.
++
++:>
++*/
++
++#ifndef __BCM_MAP_H
++#define __BCM_MAP_H
++
++#if defined(CONFIG_BCM96338)
++#include <6338_map.h>
++#endif
++#if defined(CONFIG_BCM96345)
++#include <6345_map.h>
++#endif
++#if defined(CONFIG_BCM96348)
++#include <6348_map.h>
++#endif
++
++#endif
++
+diff -urN linux-2.6.8.1/bcmdrivers/broadcom/include/bcm963xx/bcmadsl.h linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/include/bcm963xx/bcmadsl.h
+--- linux-2.6.8.1/bcmdrivers/broadcom/include/bcm963xx/bcmadsl.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/include/bcm963xx/bcmadsl.h 2006-06-26 09:07:10.000000000 +0200
+@@ -0,0 +1,199 @@
++/*
++<:copyright-broadcom
++
++ Copyright (c) 2002 Broadcom Corporation
++ All Rights Reserved
++ No portions of this material may be reproduced in any form without the
++ written permission of:
++ Broadcom Corporation
++ 16215 Alton Parkway
++ Irvine, California 92619
++ All information contained in this document is Broadcom Corporation
++ company private, proprietary, and trade secret.
++
++:>
++*/
++//**************************************************************************
++// File Name : Adsl.h
++//
++// Description: This file contains the definitions, structures and function
++// prototypes for ADSL PHY interface
++//
++//**************************************************************************
++#if !defined(_BCMADSL_H_)
++#define _BCMADSL_H_
++
++#if defined(__cplusplus)
++extern "C" {
++#endif
++
++/* Incldes. */
++#include "AdslMibDef.h"
++
++//**************************************************************************
++// Type Definitions
++//**************************************************************************
++
++// Return status values
++typedef enum BcmAdslStatus
++{
++ BCMADSL_STATUS_SUCCESS = 0,
++ BCMADSL_STATUS_ERROR
++} BCMADSL_STATUS;
++
++// Return status values
++typedef enum AdslLinkState
++{
++ BCM_ADSL_LINK_UP = 0,
++ BCM_ADSL_LINK_DOWN,
++ BCM_ADSL_TRAINING_G992_EXCHANGE,
++ BCM_ADSL_TRAINING_G992_CHANNEL_ANALYSIS,
++ BCM_ADSL_TRAINING_G992_STARTED,
++ BCM_ADSL_TRAINING_G994,
++ BCM_ADSL_G994_NONSTDINFO_RECEIVED,
++ BCM_ADSL_BERT_COMPLETE,
++ BCM_ADSL_ATM_IDLE,
++ BCM_ADSL_EVENT,
++ BCM_ADSL_G997_FRAME_RECEIVED,
++ BCM_ADSL_G997_FRAME_SENT
++} ADSL_LINK_STATE;
++
++#ifndef DISABLE_ADSL_OLD_DEF
++#define ADSL_LINK_UP BCM_ADSL_LINK_UP
++#define ADSL_LINK_DOWN BCM_ADSL_LINK_DOWN
++#endif
++
++/* ADSL test modes */
++typedef enum AdslTestMode
++{
++ ADSL_TEST_NORMAL = 0,
++ ADSL_TEST_REVERB,
++ ADSL_TEST_MEDLEY,
++ ADSL_TEST_SELECT_TONES,
++ ADSL_TEST_NO_AUTO_RETRAIN,
++ ADSL_TEST_MARGIN_TWEAK,
++ ADSL_TEST_ESTIMATE_PLL_PHASE,
++ ADSL_TEST_REPORT_PLL_PHASE_STATUS,
++ ADSL_TEST_AFELOOPBACK,
++ ADSL_TEST_L3,
++ ADSL_TEST_DIAGMODE,
++ ADSL_TEST_L0
++} ADSL_TEST_MODE;
++
++// ADSL_CHANNEL_ADDR Contains ADSL Utopia PHY addresses
++typedef struct AdslChannelAddr
++{
++ UINT16 usFastChannelAddr;
++ UINT16 usInterleavedChannelAddr;
++} ADSL_CHANNEL_ADDR, *PADSL_CHANNEL_ADDR;
++
++// ADSL_CONNECTION_INFO Contains ADSL Connection Info
++typedef struct AdslConnectionInfo
++{
++ ADSL_LINK_STATE LinkState;
++ UINT32 ulFastUpStreamRate;
++ UINT32 ulFastDnStreamRate;
++ UINT32 ulInterleavedUpStreamRate;
++ UINT32 ulInterleavedDnStreamRate;
++} ADSL_CONNECTION_INFO, *PADSL_CONNECTION_INFO;
++
++/* OEM parameter definition */
++#define ADSL_OEM_G994_VENDOR_ID 1 /* Vendor ID used during G.994 handshake */
++#define ADSL_OEM_G994_XMT_NS_INFO 2 /* G.994 non-standard info field to send */
++#define ADSL_OEM_G994_RCV_NS_INFO 3 /* G.994 received non-standard */
++#define ADSL_OEM_EOC_VENDOR_ID 4 /* EOC reg. 0 */
++#define ADSL_OEM_EOC_VERSION 5 /* EOC reg. 1 */
++#define ADSL_OEM_EOC_SERIAL_NUMBER 6 /* EOC reg. 2 */
++#define ADSL_OEM_T1413_VENDOR_ID 7 /* Vendor ID used during T1.413 handshake */
++#define ADSL_OEM_T1413_EOC_VENDOR_ID 8 /* EOC reg. 0 (vendor ID) in T1.413 mode */
++
++/* XMT gain definitions */
++#define ADSL_XMT_GAIN_AUTO 0x80000000
++
++typedef struct
++{
++ int diagCmd;
++ int diagMap;
++ int logTime;
++ int srvIpAddr;
++ int gwIpAddr;
++} ADSL_DIAG, *PADSL_DIAG;
++
++typedef struct
++{
++ short x;
++ short y;
++} ADSL_CONSTELLATION_POINT, *PADSL_CONSTELLATION_POINT;
++
++#define ADSL_CONSTEL_DATA_ID 0
++#define ADSL_CONSTEL_PILOT_ID 1
++
++#define ADSL_MIB_INFO adslMibInfo
++typedef ADSL_MIB_INFO *PADSL_MIB_INFO;
++
++typedef void (*ADSL_FN_NOTIFY_CB) (ADSL_LINK_STATE AdslLinkState, UINT32 ulParm);
++
++//**************************************************************************
++// Function Prototypes
++//**************************************************************************
++
++BCMADSL_STATUS BcmAdsl_Check(void);
++BCMADSL_STATUS BcmAdsl_Initialize(ADSL_FN_NOTIFY_CB pFnNotifyCb, UINT32 ulParm, adslCfgProfile *pAdslCfg);
++#ifdef LINUX
++BCMADSL_STATUS BcmAdsl_MapAtmPortIDs(UINT16 usAtmFastPortId, UINT16 usAtmInterleavedPortId);
++#endif
++BCMADSL_STATUS BcmAdsl_Uninitialize(void);
++BCMADSL_STATUS BcmAdsl_ConnectionStart(void);
++BCMADSL_STATUS BcmAdsl_ConnectionStop(void);
++BCMADSL_STATUS BcmAdsl_GetPhyAddresses(PADSL_CHANNEL_ADDR pChannelAddr);
++BCMADSL_STATUS BcmAdsl_SetPhyAddresses(PADSL_CHANNEL_ADDR pChannelAddr);
++BCMADSL_STATUS BcmAdsl_GetConnectionInfo(PADSL_CONNECTION_INFO pConnectionInfo);
++BCMADSL_STATUS BcmAdsl_DiagCommand(PADSL_DIAG pAdslDiag);
++int BcmAdsl_GetObjectValue(char *objId, int objIdLen, char *dataBuf, long *dataBufLen);
++BCMADSL_STATUS BcmAdsl_StartBERT(unsigned long totalBits);
++BCMADSL_STATUS BcmAdsl_StopBERT(void);
++BCMADSL_STATUS BcmAdsl_BertStartEx(unsigned long bertSec);
++BCMADSL_STATUS BcmAdsl_BertStopEx(void);
++BCMADSL_STATUS BcmAdsl_CheckPowerLoss(void);
++BCMADSL_STATUS BcmAdsl_SendDyingGasp(int powerCtl);
++BCMADSL_STATUS BcmAdsl_Configure(adslCfgProfile *pAdslCfg);
++BCMADSL_STATUS BcmAdsl_GetVersion(adslVersionInfo *pAdslVer);
++BCMADSL_STATUS BcmAdsl_SetSDRAMBaseAddr(void *pAddr);
++BCMADSL_STATUS BcmAdsl_SetVcEntry (int gfc, int port, int vpi, int vci);
++BCMADSL_STATUS BcmAdsl_SetVcEntryEx (int gfc, int port, int vpi, int vci, int pti_clp);
++
++BCMADSL_STATUS BcmAdsl_ResetStatCounters(void);
++BCMADSL_STATUS BcmAdsl_SetAtmLoopbackMode(void);
++BCMADSL_STATUS BcmAdsl_SetTestMode(ADSL_TEST_MODE testMode);
++BCMADSL_STATUS BcmAdsl_SelectTones(
++ int xmtStartTone,
++ int xmtNumTones,
++ int rcvStartTone,
++ int rcvNumTones,
++ char *xmtToneMap,
++ char *rcvToneMap
++ );
++BCMADSL_STATUS BcmAdsl_SetDiagMode(int diagMode);
++
++int BcmAdsl_GetConstellationPoints (int toneId, ADSL_CONSTELLATION_POINT *pointBuf, int numPoints);
++
++int BcmAdsl_GetOemParameter (int paramId, void *buf, int len);
++int BcmAdsl_SetOemParameter (int paramId, void *buf, int len);
++int BcmAdsl_SetXmtGain(int gain);
++
++UINT32 BcmAdsl_GetSelfTestMode(void);
++void BcmAdsl_SetSelfTestMode(UINT32 stMode);
++UINT32 BcmAdsl_GetSelfTestResults(void);
++
++BCMADSL_STATUS BcmAdsl_G997SendData(void *buf, int len);
++void *BcmAdsl_G997FrameGet(int *pLen);
++void *BcmAdsl_G997FrameGetNext(int *pLen);
++void BcmAdsl_G997FrameFinished(void);
++void BcmAdsl_DyingGaspHandler(void *context);
++
++#if defined(__cplusplus)
++}
++#endif
++
++#endif // _BCMADSL_H_
++
+diff -urN linux-2.6.8.1/bcmdrivers/broadcom/include/bcm963xx/bcmatmapi.h linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/include/bcm963xx/bcmatmapi.h
+--- linux-2.6.8.1/bcmdrivers/broadcom/include/bcm963xx/bcmatmapi.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/include/bcm963xx/bcmatmapi.h 2006-06-26 09:07:10.000000000 +0200
+@@ -0,0 +1,699 @@
++/*
++<:copyright-broadcom
++
++ Copyright (c) 2002 Broadcom Corporation
++ All Rights Reserved
++ No portions of this material may be reproduced in any form without the
++ written permission of:
++ Broadcom Corporation
++ 16215 Alton Parkway
++ Irvine, California 92619
++ All information contained in this document is Broadcom Corporation
++ company private, proprietary, and trade secret.
++
++:>
++*/
++//**************************************************************************
++// File Name : BcmAtmApi.h
++//
++// Description: This file contains the definitions, structures and function
++// prototypes for the Broadcom Asynchronous Transfer Mode (ATM)
++// Application Program Interface (API).
++//
++// Updates : 09/15/2000 lat. Created.
++//**************************************************************************
++
++#if !defined(_BCMATMAPI_H_)
++#define _BCMATMAPI_H_
++
++#if defined(__cplusplus)
++extern "C" {
++#endif
++
++//**************************************************************************
++// Constant Definitions
++//**************************************************************************
++
++// ATM physical port constants.
++#define PHY_NUM_PORTS 4
++#define PHY_0 0
++#define PHY_1 1
++#define PHY_2 2 // [BCM635x Only]
++#define PHY_3 3 // [BCM635x Only]
++
++// Used for backwards compatibility.
++#define PHY_UTOPIA0 0
++#define PHY_UTOPIA1 1
++#define PHY_UTOPIA2 2
++#define PHY_UTOPIA3_TC_LOOPBACK 3
++
++// Values for ATM_PORT_CFG ucPortType.
++#define PT_DISABLED 0
++#define PT_UTOPIA 1
++#define PT_LOOPBACK 2
++#define PT_TC 3 // [BCM635x Only]
++#define PT_ADSL_INTERLEAVED 4 // [BCM6345 Only]
++#define PT_ADSL_FAST 5 // [BCM6345 Only]
++
++// Wildcard definitions.
++#define ALL_INTERFACES 0xffffffff
++#define ANY_PRIORITY 0xff
++
++// Values for ATM_TRAFFIC_DESCR_PARM_ENTRY ulTrafficDescrType.
++#define TDT_ATM_NO_TRAFFIC_DESCRIPTOR 1
++#define TDT_ATM_NO_CLP_NO_SCR 2
++#define TDT_ATM_CLP_NO_TAGGING_NO_SCR 3
++#define TDT_ATM_CLP_TAGGING_NO_SCR 4
++#define TDT_ATM_NO_CLP_SCR 5
++#define TDT_ATM_CLP_NO_TAGGING_SCR 6 // [BCM635x Only]
++#define TDT_ATM_CLP_TAGGING_SCR 7 // [BCM635x Only]
++#define TDT_ATM_CLP_NO_TAGGING_MCR 8 // [BCM6348 Only]
++#define TDT_ATM_CLP_TRANSPARENT_NO_SCR 9
++#define TDT_ATM_CLP_TRANSPARENT_SCR 10
++#define TDT_ATM_NO_CLP_TAGGING_NO_SCR 11
++#define TDT_ATM_NO_CLP_NO_SCR_CDVT 12
++#define TDT_ATM_NO_CLP_SCR_CDVT 13
++#define TDT_ATM_CLP_NO_TAGGING_SCR_CDVT 14 // [BCM635x Only]
++#define TDT_ATM_CLP_TAGGING_SCR_CDVT 15 // [BCM635x Only]
++
++// Values for ATM_TRAFFIC_DESCR_PARM_ENTRY ulTrafficDescrRowStatus.
++#define TDRS_ACTIVE 1
++#define TDRS_NOT_IN_SERVICE 2
++
++// Values for ATM_TRAFFIC_DESCR_PARM_ENTRY ulServiceCategory.
++#define SC_OTHER 1
++#define SC_CBR 2
++#define SC_RT_VBR 3
++#define SC_NRT_VBR 4
++#define SC_UBR 6
++
++// Values for ATM_INTERFACE_CFG ulIfAdminStatus and ATM_VCC_CFG
++// ulAtmVclAdminStatus.
++#define ADMSTS_UP 1
++#define ADMSTS_DOWN 2
++#define ADMSTS_TESTING 3
++
++// Values for ATM_INTERFACE_CFG ulIfOperStatus and ATM_VCC_CFG
++// ulAtmVclOperStatus.
++#define OPRSTS_UP 1
++#define OPRSTS_DOWN 2
++#define OPRSTS_UNKNOWN 3
++
++// Values for ATM_INTERFACE_LINK_INFO ulLinkState.
++#define LINK_UP 1
++#define LINK_DOWN 2
++
++// Values for ulAalType.
++#define AAL_2 0 // [BCM635x Only]
++#define AAL_TRANSPARENT 1
++#define AAL_0_PACKET 2
++#define AAL_0_CELL_CRC 3
++#define AAL_5 7
++
++// Values for ATM_VCC_CFG ulAtmVccEncapsType.
++#define ET_VC_MULTIPLEX_ROUTED_PROTOCOL 1
++#define ET_VC_MULTIPLEX_BRG_PROTOCOL_8023 2
++#define ET_VC_MULTIPLEX_BRG_PROTOCOL_8025 3
++#define ET_VC_MULTIPLEX_BRG_PROTOCOL_8026 4
++#define ET_VC_MULTIPLEX_LAN_EMULATION_8023 5
++#define ET_VC_MULTIPLEX_LAN_EMULATION_8025 6
++#define ET_LLC_ENCAPSULATION 7
++#define ET_MULTI_PROTOCOL_FRAME_RELAY_SSCS 8
++#define ET_OTHER 9
++#define ET_UNKNOWN 10
++
++// [BCM635x Only] Values for ATM_AAL2_VCC_CFG ucAal2CpsOptimisation.
++#define OPT_SNG_PKT_PER_PDU_NO_OVERLAP 1
++#define OPT_MULT_PKTS_PER_PDU_OVERLAP 2
++
++// [BCM635x Only] Values for ATM_INTERFACE_STATS ulTcAlarmState.
++#define TCALM_NO_ALARM 1
++#define TCALM_LCD_FAILURE 2
++
++// Values for ATM_NOTIFY_PARMS ulNotificationType.
++#define ATM_NOTIFY_INTERFACE_CHANGE 1
++
++// Values for AN_INTF_CHANGE_PARMS ulInterfaceState.
++#define ATM_INTERFACE_UP 1
++#define ATM_INTERFACE_DOWN 2
++
++// Values for AN_VCC_CHANGE_PARMS ulInterfaceState.
++#define ATM_VCC_UP 1
++#define ATM_VCC_DOWN 2
++
++// Values for ATM_VCC_ATTACH_PARMS ulFlags.
++#define AVAP_ALLOW_OAM_F5_SEGMENT_CELLS 0x0001
++#define AVAP_ALLOW_OAM_F5_END_TO_END_CELLS 0x0002
++#define AVAP_ALLOW_RM_CELLS 0x0004
++#define AVAP_ALLOW_OAM_F4_SEGMENT_CELLS 0x0008
++#define AVAP_ALLOW_OAM_F4_END_TO_END_CELLS 0x0010
++#define AVAP_ALLOW_CELLS_WITH_ERRORS 0x0020
++#define AVAP_ADD_AAL0_CRC10 0x0040
++#define AVAP_DSP 0x8000 // [BCM635x Only]
++
++// [BCM635x Only] Values for ATM_VCC_AAL2_CHANNEL_ID_PARMS ucVoiceRouting.
++#define VOICE_ROUTE_MIPS 0
++#define VOICE_ROUTE_DSP 2
++
++// [BCM635x Only] Values for ATM_VCC_AAL2_CHANNEL_ID_PARMS ucFlags.
++#define CID_USE_FRAME_MODE 0x01
++
++// Values for ATM_VCC_DATA_PARMS ucCircuitType.
++#define CT_AAL0_PACKET 0x02
++#define CT_AAL0_CELL_CRC 0x03
++#define CT_OAM_F5_SEGMENT 0x04
++#define CT_OAM_F5_END_TO_END 0x05
++#define CT_RM 0x06
++#define CT_AAL5 0x07
++#define CT_HDLC_PACKET 0x08 // [BCM6348 Only]
++#define CT_ANY_AAL2_MASK 0x08 // [BCM635x Only]
++#define CT_AAL2_ALARM 0x08 // [BCM635x Only]
++#define CT_AAL2_TYPE_3 0x09 // [BCM635x Only]
++#define CT_AAL2_TYPE_1 0x0A // [BCM635x Only]
++#define CT_AAL2_FRAME 0x0B // [BCM635x Only]
++#define CT_TRANSPARENT 0x10
++#define CT_OAM_F4_ANY 0x20
++
++// OAM F4 VCI values.
++#define VCI_OAM_F4_SEGMENT 3
++#define VCI_OAM_F4_END_TO_END 4
++#define VCI_RM 6
++
++// Values for ATM_VCC_DATA_PARMS ucFlags.
++#define ATMDATA_CI 0x04
++#define ATMDATA_CLP 0x08
++
++// [BCM635x Only] DSP specific values.
++#define DSP_VCID 31
++
++// ATM cell layer interface name
++#define ATM_CELL_LAYER_IFNAME "atm0"
++
++// AAL5 CPCS layer interface name
++#define AAL5_CPCS_LAYER_IFNAME "cpcs0"
++
++//**************************************************************************
++// Type Definitions
++//**************************************************************************
++
++// Return status values
++typedef enum BcmAtmStatus
++{
++ STS_SUCCESS = 0,
++ STS_ERROR,
++ STS_STATE_ERROR,
++ STS_PARAMETER_ERROR,
++ STS_ALLOC_ERROR,
++ STS_RESOURCE_ERROR,
++ STS_IN_USE,
++ STS_VCC_DOWN,
++ STS_INTERFACE_DOWN,
++ STS_LINK_DOWN,
++ STS_NOT_FOUND,
++ STS_NOT_SUPPORTED,
++ STS_VCAM_MULT_MATCH_ERROR,
++ STS_CCAM_MULT_MATCH_ERROR,
++ STS_PKTERR_INVALID_VPI_VCI,
++ STS_PKTERR_PORT_NOT_ENABLED,
++ STS_PKTERR_HEC_ERROR,
++ STS_PKTERR_PTI_ERROR,
++ STS_PKTERR_RECEIVED_IDLE_CELL,
++ STS_PKTERR_CIRCUIT_TYPE_ERROR,
++ STS_PKTERR_OAM_RM_CRC_ERROR,
++ STS_PKTERR_GFC_ERROR,
++ STS_PKTERR_AAL5_AAL0_CRC_ERROR,
++ STS_PKTERR_AAL5_AAL0_SHORT_PKT_ERROR,
++ STS_PKTERR_AAL5_AAL0_LENGTH_ERROR,
++ STS_PKTERR_AAL5_AAL0_BIG_PKT_ERROR,
++ STS_PKTERR_AAL5_AAL0_SAR_TIMEOUT_ERROR,
++ STS_PKTERR_AAL2F_HEC_ERROR,
++ STS_PKTERR_AAL2F_SEQ_NUM_ERROR,
++ STS_PKTERR_AAL2F_PARITY_ERROR,
++ STS_PKTERR_AAL2F_CRC_ERROR,
++ STS_PKTERR_AAL2F_CAM_ERROR,
++ STS_PKTERR_AAL2F_BIG_PKT_ERROR,
++ STS_PKTERR_AAL2F_RAS_TIMEOUT_ERROR,
++ STS_PKTERR_AAL2F_SHORT_PKT_ERROR,
++ STS_PKTERR_AAL2F_LENGTH_MISMATCH_ERROR,
++ STS_PKTERR_AAL2V_HEC_ERROR,
++ STS_PKTERR_AAL2V_SEQ_NUM_ERROR,
++ STS_PKTERR_AAL2V_PARITY_ERROR,
++ STS_PKTERR_AAL2V_CRC_ERROR,
++ STS_PKTERR_AAL2V_CAM_ERROR,
++ STS_PKTERR_AAL2V_OSF_MISMATCH_ERROR,
++ STS_PKTERR_AAL2V_OSF_ERROR,
++ STS_PKTERR_AAL2V_HEC_OVERLAP_ERROR,
++ STS_PKTERR_AAL2V_BIG_PKT_ERROR,
++ STS_PKTERR_AAL2V_RAS_ERROR,
++ STS_PKTERR_AAL2V_UUI_ERROR
++} BCMATM_STATUS;
++
++
++// ATM_VCC_ADDR identifies a Virtual Channel Connection (VCC).
++typedef struct AtmVccAddr
++{
++ UINT32 ulInterfaceId;
++ UINT16 usVpi;
++ UINT16 usVci;
++} ATM_VCC_ADDR, *PATM_VCC_ADDR;
++
++
++// ATM_PORT_CFG contains ATM physical port configuration parameters.
++typedef struct AtmPortCfg
++{
++ UINT32 ulInterfaceId;
++ UINT8 ucPortType;
++ UINT8 ucPortAddr;
++ UINT8 ucReserved[2];
++} ATM_PORT_CFG, *PATM_PORT_CFG;
++
++
++// ATM_INITIALIZATION_PARMS contains ATM API module initialization parameters.
++#define ID_ATM_INITIALIZATION_PARMS 2
++typedef struct AtmInitialization
++{
++ UINT32 ulStructureId;
++ UINT32 ulThreadPriority;
++ UINT16 usFreeCellQSize;
++ UINT16 usFreePktQSize;
++ UINT16 usFreePktQBufferSize;
++ UINT16 usFreePktQBufferOffset; // offset into buffer to start receiving data
++ UINT16 usReceiveCellQSize;
++ UINT16 usReceivePktQSize;
++ UINT8 ucTransmitFifoPriority; // [BCM635x Only]
++ UINT8 ucReserved;
++ UINT16 usAal5CpcsMaxSduLength;
++ UINT16 usAal2SscsMaxSsarSduLength; // [BCM635x Only]
++ ATM_PORT_CFG PortCfg[PHY_NUM_PORTS];
++} ATM_INITIALIZATION_PARMS, *PATM_INITIALIZATION_PARMS;
++
++
++// ATM_TRAFFIC_DESCR_PARM_ENTRY contains the fields needed to create a Traffic
++// Descriptor Table parameter entry.
++#define ID_ATM_TRAFFIC_DESCR_PARM_ENTRY 1
++typedef struct AtmTrafficDescrParmEntry
++{
++ UINT32 ulStructureId;
++ UINT32 ulTrafficDescrIndex;
++ UINT32 ulTrafficDescrType;
++ UINT32 ulTrafficDescrParm1;
++ UINT32 ulTrafficDescrParm2;
++ UINT32 ulTrafficDescrParm3;
++ UINT32 ulTrafficDescrParm4;
++ UINT32 ulTrafficDescrParm5;
++ UINT32 ulTrafficDescrRowStatus;
++ UINT32 ulServiceCategory;
++ UINT32 ulTrafficFrameDiscard;
++} ATM_TRAFFIC_DESCR_PARM_ENTRY, *PATM_TRAFFIC_DESCR_PARM_ENTRY;
++
++
++// ATM_INTERFACE_CFG contains configuration fields for an ATM interface.
++#define ID_ATM_INTERFACE_CFG 3
++typedef struct AtmInterfaceCfg
++{
++ UINT32 ulStructureId;
++ UINT32 ulAtmInterfaceMaxVccs;
++ UINT32 ulAtmInterfaceConfVccs;
++ UINT32 ulAtmInterfaceMaxActiveVpiBits;
++ UINT32 ulAtmInterfaceMaxActiveVciBits;
++ UINT32 ulAtmInterfaceCurrentMaxVpiBits;
++ UINT32 ulAtmInterfaceCurrentMaxVciBits;
++ UINT32 ulIfAdminStatus;
++ UINT32 ulIfOperStatus; // read-only
++ UINT32 ulSendNullCells;
++ UINT32 ulTcScramble;
++ UINT32 ulPortType; // read-only
++ UINT32 ulIfLastChange;
++} ATM_INTERFACE_CFG, *PATM_INTERFACE_CFG;
++
++
++// ATM_VCC_TRANSMIT_QUEUE_PARMS contains fields for configuring an transmit
++// queue.
++#define ID_ATM_VCC_TRANSMIT_QUEUE_PARMS 1
++typedef struct AtmVccTransmitQueueParms
++{
++ UINT32 ulStructureId;
++ UINT32 ulSize;
++ UINT32 ulPriority;
++ UINT32 ulReserved;
++} ATM_VCC_TRANSMIT_QUEUE_PARMS, *PATM_VCC_TRANSMIT_QUEUE_PARMS;
++
++
++// ATM_AAL5_VCC_CFG contains configuration fields for an ATM AAL5 Virtual
++// Channel Connection (VCC).
++typedef struct AtmAal5VccCfg
++{
++ UINT32 ulAtmVccEncapsType;
++ UINT32 ulAtmVccCpcsAcceptCorruptedPdus;
++} ATM_AAL5_VCC_CFG, *PATM_AAL5_VCC_CFG;
++
++
++// [BCM635x Only] ATM_AAL2_VCC_CFG contains configuration fields for an ATM
++// AAL2 Virtual Channel Connection (VCC).
++typedef struct AtmAal2VccCfg
++{
++ UINT8 ucAal2CpsMaxMultiplexedChannels;
++ UINT8 ucAal2CpsMaxSduLength;
++ UINT8 ucAal2CpsCidLowerLimit;
++ UINT8 ucAal2CpsCidUpperLimit;
++ UINT8 ucAal2CpsOptimisation;
++ UINT8 ucReserved[3];
++} ATM_AAL2_VCC_CFG, *PATM_AAL2_VCC_CFG;
++
++
++// ATM_AAL0_VCC_CFG contains configuration fields for an ATM AAL0 Virtual
++// Channel Connection (VCC).
++typedef struct AtmAal0VccCfg
++{
++ UINT8 ucReserved;
++ // Reserved for future use.
++} ATM_AAL0_VCC_CFG, *PATM_AAL0_VCC_CFG;
++
++
++// ATM_VCC_CFG contains configuration fields for an ATM Virtual Channel
++// Connection (VCC).
++#define ID_ATM_VCC_CFG 2
++#define TX_Q_PARM_SIZE 8
++typedef struct AtmVccCfg
++{
++ UINT32 ulStructureId;
++ UINT32 ulAalType;
++ UINT32 ulAtmVclAdminStatus;
++ UINT32 ulAtmVclOperStatus;
++ UINT32 ulAtmVclLastChange;
++ UINT32 ulAtmVclReceiveTrafficDescrIndex;
++ UINT32 ulAtmVclTransmitTrafficDescrIndex;
++ UINT32 ulTransmitQParmsSize;
++ ATM_VCC_TRANSMIT_QUEUE_PARMS TransmitQParms[TX_Q_PARM_SIZE];
++ union
++ {
++ ATM_AAL5_VCC_CFG Aal5Cfg;
++ ATM_AAL2_VCC_CFG Aal2Cfg; // [BCM635x Only]
++ ATM_AAL0_VCC_CFG Aal0Cfg;
++ } u;
++} ATM_VCC_CFG, *PATM_VCC_CFG;
++
++
++// ATM_INTF_ATM_STATS contains statistics for the ATM layer of an interface.
++typedef struct AtmIntfAtmStats
++{
++ UINT32 ulIfInOctets;
++ UINT32 ulIfOutOctets;
++ UINT32 ulIfInErrors;
++ UINT32 ulIfInUnknownProtos;
++ UINT32 ulIfOutErrors;
++
++ // The following fields are added together to calculate ulIfInErrors.
++ UINT32 ulIfInHecErrors;
++
++ // The following fields are added together to calculate ulIfInUnknownProtos.
++ UINT32 ulIfInInvalidVpiVciErrors;
++ UINT32 ulIfInPortNotEnabledErrors;
++ UINT32 ulIfInPtiErrors;
++ UINT32 ulIfInIdleCells;
++ UINT32 ulIfInCircuitTypeErrors;
++ UINT32 ulIfInOamRmCrcErrors;
++ UINT32 ulIfInGfcErrors;
++} ATM_INTF_ATM_STATS, *PATM_INTF_ATM_STATS;
++
++
++// [BCM635x Only] ATM_INTF_ATM_STATS contains statistics for the TC layer.
++typedef struct AtmIntfTcStats
++{
++ UINT32 ulTcInDataCells;
++ UINT32 ulTcInTotalCells;
++ UINT32 ulTcInHecErrors;
++ UINT32 ulTcInOcdEvents;
++ UINT32 ulTcAlarmState;
++} ATM_INTF_TC_STATS, *PATM_INTF_TC_STATS;
++
++
++// ATM_INTF_AAL5_AAL0_STATS contains statistics for all AAL5/AAL0 VCCs on an
++// ATM interface.
++typedef struct AtmIntfAal5Aal0Stats
++{
++ UINT32 ulIfInOctets;
++ UINT32 ulIfOutOctets;
++ UINT32 ulIfInUcastPkts;
++ UINT32 ulIfOutUcastPkts;
++ UINT32 ulIfInErrors;
++ UINT32 ulIfOutErrors;
++ UINT32 ulIfInDiscards;
++ UINT32 ulIfOutDiscards;
++} ATM_INTF_AAL5_AAL0_STATS, *PATM_INTF_AAL5_AAL0_STATS;
++
++
++// [BCM635x Only] ATM_INTF_AAL2_STATS contains statistics for all AAL2 VCCs
++// on an ATM interface.
++typedef struct AtmIntfAal2Stats
++{
++ UINT32 ulIfInOctets;
++ UINT32 ulIfOutOctets;
++ UINT32 ulIfInUcastPkts;
++ UINT32 ulIfOutUcastPkts;
++ UINT32 ulIfInErrors;
++ UINT32 ulIfOutErrors;
++ UINT32 ulIfInDiscards;
++ UINT32 ulIfOutDiscards;
++} ATM_INTF_AAL2_STATS, *PATM_INTF_AAL2_STATS;
++
++
++// ATM_INTERFACE_STATS contains statistics for an ATM interface.
++#define ID_ATM_INTERFACE_STATS 1
++typedef struct AtmInterfaceStats
++{
++ UINT32 ulStructureId;
++ ATM_INTF_ATM_STATS AtmIntfStats;
++ ATM_INTF_TC_STATS TcIntfStats; // [BCM635x Only]
++ ATM_INTF_AAL5_AAL0_STATS Aal5IntfStats;
++ ATM_INTF_AAL2_STATS Aal2IntfStats; // [BCM635x Only]
++ ATM_INTF_AAL5_AAL0_STATS Aal0IntfStats;
++} ATM_INTERFACE_STATS, *PATM_INTERFACE_STATS;
++
++
++// ATM_VCC_AAL5_STATS contains statistics for an AAL5 VCC.
++typedef struct AtmVccAal5Stats
++{
++ UINT32 ulAal5VccCrcErrors;
++ UINT32 ulAal5VccSarTimeOuts;
++ UINT32 ulAal5VccOverSizedSdus;
++ UINT32 ulAal5VccShortPacketErrors;
++ UINT32 ulAal5VccLengthErrors;
++} ATM_VCC_AAL5_STATS, *PATM_VCC_AAL5_STATS;
++
++
++// [BCM635x Only] ATM_VCC_AAL2_STATS contains statistics for an AAL2 VCC.
++typedef struct AtmVccAal2Stats
++{
++ UINT32 ulAal2CpsInPkts;
++ UINT32 ulAal2CpsOutPkts;
++ UINT32 ulAal2CpsParityErrors;
++ UINT32 ulAal2CpsSeqNumErrors;
++ UINT32 ulAal2CpsOsfMismatchErrors;
++ UINT32 ulAal2CpsOsfErrors;
++ UINT32 ulAal2CpsHecOverlapErrors;
++ UINT32 ulAal2CpsHecErrors;
++ UINT32 ulAal2CpsOversizedSduErrors;
++ UINT32 ulAal2CpsReassemblyErrors;
++ UINT32 ulAal2CpsUuiErrors;
++ UINT32 ulAal2CpsCidErrors;
++ UINT32 ulAal2SscsOversizedSssarSduErrors;
++ UINT32 ulAal2SscsSssarRasTimerExipiryErrors;
++ UINT32 ulAal2SscsUndersizedSstedPduErrors;
++ UINT32 ulAal2SscsSstedPduLengthMismatchErrors;
++ UINT32 ulAal2SscsSstedCrcMismatchErrors;
++} ATM_VCC_AAL2_STATS, *PATM_VCC_AAL2_STATS;
++
++
++// ATM_VCC_AAL0PKT_STATS contains statistics for an AAL0 Packet VCC.
++typedef struct AtmVccAal0PktStats
++{
++ UINT32 ulAal0VccSarTimeOuts;
++ UINT32 ulAal0VccOverSizedSdus;
++} ATM_VCC_AAL0PKT_STATS, *PATM_VCC_AAL0PKT_STATS;
++
++
++// ATM_VCC_AAL0CELL_STATS contains statistics for an AAL0 Cell with CRC VCC.
++typedef struct AtmVccAal0CellStats
++{
++ UINT32 ulAal0VccCrcErrors;
++} ATM_VCC_AAL0CELL_STATS, *PATM_VCC_AAL0CELL_STATS;
++
++
++// ATM_VCC_STATS contains statistics for a VCC.
++#define ID_ATM_VCC_STATS 1
++typedef struct AtmVccStatistics
++{
++ UINT32 ulStructureId;
++ UINT32 ulAalType;
++ union
++ {
++ ATM_VCC_AAL5_STATS AtmVccAal5Stats;
++ ATM_VCC_AAL2_STATS AtmVccAal2Stats; // [BCM635x Only]
++ ATM_VCC_AAL0PKT_STATS AtmVccAal0PktStats;
++ ATM_VCC_AAL0CELL_STATS AtmVccAal0CellStats;
++ } u;
++} ATM_VCC_STATS, *PATM_VCC_STATS;
++
++
++// ATM_INTERFACE_LINK_INFO contains fields for the physical link that the
++// ATM interface is using.
++#define ID_ATM_INTERFACE_LINK_INFO 1
++typedef struct AtmInterfaceLinkInfo
++{
++ UINT32 ulStructureId;
++ UINT32 ulLinkState;
++ UINT32 ulLineRate;
++ UINT32 ulReserved[2];
++} ATM_INTERFACE_LINK_INFO, *PATM_INTERFACE_LINK_INFO;
++
++
++// AN_INTF_CHANGE_PARMS contains notification fields that passed to an
++// application callback function when the ATM interface goes up or down.
++#define ID_AN_INTF_CHANGE_PARMS 1
++typedef struct AnIntfChangeParms
++{
++ UINT32 ulInterfaceId;
++ UINT32 ulInterfaceState;
++ UINT32 ulInterfaceLineRate;
++} AN_INTF_CHANGE_PARMS, *PAN_INTF_CHANGE_PARMS;
++
++
++// ATM_NOTIFY_PARMS contains notification fields that passed to an application
++// callback function when an ATM notification event occurs.
++typedef struct AtmNotifyParms
++{
++ UINT32 ulNotifyType;
++ union
++ {
++ AN_INTF_CHANGE_PARMS IntfChangeParms;
++
++ // Other fields and structures that are specific
++ // to the type of notification are declared here.
++ } u;
++} ATM_NOTIFY_PARMS, *PATM_NOTIFY_PARMS;
++
++typedef void (*FN_NOTIFY_CB) (PATM_NOTIFY_PARMS pNotifyParms);
++
++
++// ATM_VCC_ATTACH_PARMS contains fields for attaching to a VCC. It is used
++// by all BcmAtm_Attach... functions.
++struct AtmVccDataParms;
++typedef void (*FN_RECEIVE_CB) (UINT32 ulHandle, PATM_VCC_ADDR pVccAddr,
++ struct AtmVccDataParms *pDataParms, UINT32 ulParmReceiveData);
++
++#define ID_ATM_VCC_ATTACH_PARMS 1
++typedef struct AtmAttachParms
++{
++ UINT32 ulStructureId;
++ UINT32 ulFlags;
++ FN_RECEIVE_CB pFnReceiveDataCb;
++ UINT32 ulParmReceiveData;
++ ATM_VCC_TRANSMIT_QUEUE_PARMS *pTransmitQParms;
++ UINT32 ulTransmitQParmsSize;
++ UINT32 ulHandle;
++ UINT32 ulReserved;
++} ATM_VCC_ATTACH_PARMS, *PATM_VCC_ATTACH_PARMS;
++
++
++// [BCM635x Only] ATM_VCC_AAL2_CHANNEL_ID_PARMS contains fields for
++// configuring an transmit queue.
++#define ID_ATM_VCC_AAL2_CHANNEL_ID_PARMS 1
++typedef struct AtmVccAal2ChannelIdParms
++{
++ UINT32 ulStructureId;
++ UINT8 ucChannelId;
++ UINT8 ucVoiceRouting;
++ UINT8 ucFlags;
++ UINT8 ucReserved[5];
++} ATM_VCC_AAL2_CHANNEL_ID_PARMS, *PATM_VCC_AAL2_CHANNEL_ID_PARMS;
++
++
++// ATM_BUFFER contains fields for passing data to, and receive data from, the
++// ATM API.
++typedef struct AtmBuffer
++{
++ struct AtmBuffer *pNextAtmBuf;
++ UINT8 *pDataBuf;
++ UINT32 ulDataLen;
++ UINT16 usDataOffset;
++ UINT16 usReserved;
++ UINT32 ulReserved;
++} ATM_BUFFER, *PATM_BUFFER;
++
++
++// ATM_VCC_DATA_PARMS contains fields for sending or receiving data on a VCC.
++// It is used by all BcmAtm_Send... and receive functions.
++typedef void (*FN_FREE_DATA_PARMS) (struct AtmVccDataParms *pDataParms);
++
++#define ID_ATM_VCC_DATA_PARMS 2
++typedef struct AtmVccDataParms
++{
++ UINT32 ulStructureId;
++ UINT8 ucCircuitType;
++ UINT8 ucAal2ChannelId; // [BCM635x Only]
++ UINT8 ucUuData8;
++ UINT8 ucUuData5;
++ UINT8 ucFlags;
++ UINT8 ucSendPriority;
++ UINT8 ucReserved[2];
++ BCMATM_STATUS baReceiveStatus;
++ PATM_BUFFER pAtmBuffer;
++ FN_FREE_DATA_PARMS pFnFreeDataParms;
++ UINT32 ulParmFreeDataParms;
++ struct AtmVccDataParms *pApplicationLink;
++ UINT32 ulApplicationDefined[2];
++} ATM_VCC_DATA_PARMS, *PATM_VCC_DATA_PARMS;
++
++
++//**************************************************************************
++// Function Prototypes
++//**************************************************************************
++
++BCMATM_STATUS BcmAtm_Initialize( PATM_INITIALIZATION_PARMS pInitValues );
++BCMATM_STATUS BcmAtm_Uninitialize( void );
++BCMATM_STATUS BcmAtm_GetInterfaceId( UINT8 ucPhyPort, UINT32 *pulInterfaceId );
++BCMATM_STATUS BcmAtm_GetTrafficDescrTableSize(UINT32 *pulTrafficDescrTableSize);
++BCMATM_STATUS BcmAtm_GetTrafficDescrTable( PATM_TRAFFIC_DESCR_PARM_ENTRY
++ pTrafficDescTable, UINT32 ulTrafficDescrTableSize );
++BCMATM_STATUS BcmAtm_SetTrafficDescrTable( PATM_TRAFFIC_DESCR_PARM_ENTRY
++ pTrafficDescTable, UINT32 ulTrafficDescrTableSize );
++BCMATM_STATUS BcmAtm_GetInterfaceCfg( UINT32 ulInterfaceId, PATM_INTERFACE_CFG
++ pInterfaceCfg );
++BCMATM_STATUS BcmAtm_SetInterfaceCfg( UINT32 ulInterfaceId, PATM_INTERFACE_CFG
++ pInterfaceCfg );
++BCMATM_STATUS BcmAtm_GetVccCfg( PATM_VCC_ADDR pVccAddr, PATM_VCC_CFG pVccCfg );
++BCMATM_STATUS BcmAtm_SetVccCfg( PATM_VCC_ADDR pVccAddr, PATM_VCC_CFG pVccCfg );
++BCMATM_STATUS BcmAtm_GetVccAddrs( UINT32 ulInterfaceId, PATM_VCC_ADDR pVccAddrs,
++ UINT32 ulNumVccs, UINT32 *pulNumReturned );
++BCMATM_STATUS BcmAtm_GetInterfaceStatistics( UINT32 ulInterfaceId,
++ PATM_INTERFACE_STATS pStatistics, UINT32 ulReset );
++BCMATM_STATUS BcmAtm_GetVccStatistics( PATM_VCC_ADDR pVccAddr, PATM_VCC_STATS
++ pVccStatistics, UINT32 ulReset );
++BCMATM_STATUS BcmAtm_SetInterfaceLinkInfo( UINT32 ulInterfaceId,
++ PATM_INTERFACE_LINK_INFO pInterfaceCfg );
++BCMATM_STATUS BcmAtm_SetNotifyCallback( FN_NOTIFY_CB pFnNotifyCb );
++BCMATM_STATUS BcmAtm_ResetNotifyCallback( FN_NOTIFY_CB pFnNotifyCb );
++BCMATM_STATUS BcmAtm_AttachVcc( PATM_VCC_ADDR pVccAddr, PATM_VCC_ATTACH_PARMS
++ pAttachParms );
++BCMATM_STATUS BcmAtm_AttachMgmtCells( UINT32 ulInterfaceId,
++ PATM_VCC_ATTACH_PARMS pAttachParms );
++BCMATM_STATUS BcmAtm_AttachTransparent( UINT32 ulInterfaceId,
++ PATM_VCC_ATTACH_PARMS pAttachParms );
++BCMATM_STATUS BcmAtm_Detach( UINT32 ulHandle );
++BCMATM_STATUS BcmAtm_SetAal2ChannelIds( UINT32 ulHandle,
++ PATM_VCC_AAL2_CHANNEL_ID_PARMS pChannelIdParms, UINT32
++ ulNumChannelIdParms ); // [BCM635x Only]
++BCMATM_STATUS BcmAtm_SendVccData( UINT32 ulHandle,
++ PATM_VCC_DATA_PARMS pDataParms );
++BCMATM_STATUS BcmAtm_SendMgmtData( UINT32 ulHandle, PATM_VCC_ADDR pVccAddr,
++ PATM_VCC_DATA_PARMS pDataParms );
++BCMATM_STATUS BcmAtm_SendTransparentData( UINT32 ulHandle, UINT32 ulInterfaceId,
++ PATM_VCC_DATA_PARMS pDataParms );
++
++#if defined(__cplusplus)
++}
++#endif
++
++#endif // _BCMATMAPI_H_
++
+diff -urN linux-2.6.8.1/bcmdrivers/broadcom/include/bcm963xx/bcmnet.h linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/include/bcm963xx/bcmnet.h
+--- linux-2.6.8.1/bcmdrivers/broadcom/include/bcm963xx/bcmnet.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/include/bcm963xx/bcmnet.h 2006-06-26 09:07:10.000000000 +0200
+@@ -0,0 +1,78 @@
++/*
++<:copyright-gpl
++ Copyright 2002 Broadcom Corp. All Rights Reserved.
++
++ This program is free software; you can distribute it and/or modify it
++ under the terms of the GNU General Public License (Version 2) as
++ published by the Free Software Foundation.
++
++ This program is distributed in the hope it will be useful, but WITHOUT
++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
++ for more details.
++
++ You should have received a copy of the GNU General Public License along
++ with this program; if not, write to the Free Software Foundation, Inc.,
++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
++:>
++*/
++/***********************************************************************/
++/* */
++/* MODULE: bcmnet.h */
++/* DATE: 05/16/02 */
++/* PURPOSE: network interface ioctl definition */
++/* */
++/***********************************************************************/
++#ifndef _IF_NET_H_
++#define _IF_NET_H_
++
++#if __cplusplus
++extern "C" {
++#endif
++
++#define LINKSTATE_DOWN 0
++#define LINKSTATE_UP 1
++
++/*---------------------------------------------------------------------*/
++/* Ethernet Switch Type */
++/*---------------------------------------------------------------------*/
++#define ESW_TYPE_UNDEFINED 0
++#define ESW_TYPE_BCM5325M 1
++#define ESW_TYPE_BCM5325E 2
++#define ESW_TYPE_BCM5325F 3
++
++/*
++ * Ioctl definitions.
++ */
++/* reserved SIOCDEVPRIVATE */
++enum {
++ SIOCGLINKSTATE = SIOCDEVPRIVATE + 1,
++ SIOCSCLEARMIBCNTR,
++ SIOCGIFTRANSSTART,
++ SIOCMIBINFO,
++ SIOCSDUPLEX, /* 0: auto 1: full 2: half */
++ SIOCSSPEED, /* 0: auto 1: 100mbps 2: 10mbps */
++ SIOCCIFSTATS,
++ SIOCGENABLEVLAN,
++ SIOCGDISABLEVLAN,
++ SIOCGQUERYNUMVLANPORTS,
++ SIOCGSWITCHTYPE,
++ SIOCGQUERYNUMPORTS,
++ SIOCLAST
++};
++
++#define SPEED_10MBIT 10000000
++#define SPEED_100MBIT 100000000
++
++typedef struct IoctlMibInfo
++{
++ unsigned long ulIfLastChange;
++ unsigned long ulIfSpeed;
++} IOCTL_MIB_INFO, *PIOCTL_MIB_INFO;
++
++
++#if __cplusplus
++}
++#endif
++
++#endif /* _IF_NET_H_ */
+diff -urN linux-2.6.8.1/bcmdrivers/broadcom/include/bcm963xx/bcmos.h linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/include/bcm963xx/bcmos.h
+--- linux-2.6.8.1/bcmdrivers/broadcom/include/bcm963xx/bcmos.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/include/bcm963xx/bcmos.h 2006-06-26 09:07:10.000000000 +0200
+@@ -0,0 +1,98 @@
++/***************************************************************************
++* Copyright 2000 Broadcom Corporation
++* All Rights Reserved
++* No portions of this material may be reproduced in any form without the
++* written permission of:
++* Broadcom Corporation
++* 16251 Laguna Canyon Road
++* Irvine, California 92618
++* All information contained in this document is Broadcom Corporation
++* company private, proprietary, and trade secret.
++*
++****************************************************************************
++*
++* Filename: bcmos.h
++* Creation Date: 8 June 2000 (v0.00)
++* VSS Info:
++* $Revision: 16 $
++* $Date: 5/03/01 5:03p $
++*
++****************************************************************************
++* Description:
++*
++* Broadcom Generic Operating System Functions.
++*
++****************************************************************************/
++
++#ifndef _BCMOS_H
++#define _BCMOS_H
++#ifdef __cplusplus
++extern "C" {
++#endif
++
++#ifdef __KERNEL__
++#include <cxcEnv.h>
++#include <bosSleep.h>
++#include <bosTask.h>
++
++#include <linux/kernel.h>
++#include <linux/slab.h>
++#include <linux/interrupt.h>
++#include <bcmtypes.h>
++
++#define malloc(arg) kmalloc(arg, GFP_KERNEL)
++#define free(arg) kfree(arg)
++
++#define BCMOS_ASSERT(expr) \
++if ((expr)? 0:1) \
++{ \
++ printk(" ASSERT !!! File %s, line %u \n", __FILE__, __LINE__); \
++ bosSleep( 10 ); \
++ cli(); /* Disable interrupts */ \
++ while(1){ ; } \
++}
++
++#define CXC_ASSERT BCMOS_ASSERT // For compatibility with CX's endpoint
++
++/* !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!*/
++/* Special BOS definitions */
++/* !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!*/
++#define DSL_NO_RESETSUPPORT
++
++
++#define bosSocketHtoNL( num ) ((UINT32)( num ))
++#define bosSocketHtoNS( num ) ((UINT16)( num ))
++#define bosSocketNtoHL( num ) ((UINT32)( num ))
++#define bosSocketNtoHS( num ) ((UINT16)( num ))
++#define bosSocketNtoHS( num ) ((UINT16)( num ))
++#define bosSocketNtoHU16 bosSocketNtoHS
++
++
++#else /* LINUX */
++
++#include <cxcEnv.h>
++#include <assert.h>
++#include <string.h>
++#include <malloc.h>
++
++#define BCMOS_TASKNAME( nameVar, nameStr ) char nameVar[] = nameStr
++
++#define TEN_MSEC 10
++#define TWENTY_MSEC 20
++#define ONE_HUNDRED_MSEC 100
++#define FIVE_HUNDRED_MSEC 500
++#define ONE_SECOND 1000
++#define TWO_SECONDS 2000
++
++#define BCMOS_ASSERT( expr) assert( expr )
++
++#endif
++
++#ifdef __cplusplus
++ }
++#endif
++
++
++#endif /* _BCMOS_H */
++
++
+diff -urN linux-2.6.8.1/bcmdrivers/broadcom/include/bcm963xx/cxcEnv.h linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/include/bcm963xx/cxcEnv.h
+--- linux-2.6.8.1/bcmdrivers/broadcom/include/bcm963xx/cxcEnv.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/include/bcm963xx/cxcEnv.h 2006-06-26 09:07:10.000000000 +0200
+@@ -0,0 +1,79 @@
++/***************************************************************************
++* Copyright 2000 Broadcom Corporation
++* All Rights Reserved
++* No portions of this material may be reproduced in any form without the
++* written permission of:
++* Broadcom Corporation
++* 16251 Laguna Canyon Road
++* Irvine, California 92618
++* All information contained in this document is Broadcom Corporation
++* company private, proprietary, and trade secret.
++*
++****************************************************************************
++*
++* Filename: cxcEnv.h
++* Creation Date:
++* VSS Info:
++* $Revision: 43 $
++* $Date: 12/03/02 5:50p $
++*
++****************************************************************************
++* Description:
++*
++* This file is used in CableX to provide system-wide types and definitions. Howewever.
++* since iit tries to include various C run-time library dcefintions (eh stdio.h, it is not
++* appropriate for use "as is" in a Linux kernel environment. So the CableX endpoint source
++* does not need to change, we use this file to recursively include bcmtypes.h
++*
++* NOTE: This file is based upon LDX's hausenv.h, but has been renamed to
++* avoid project dependencies, and allow for CablexChange customizations.
++*
++****************************************************************************/
++
++#ifndef CXC_ENV_H
++#define CXC_ENV_H
++
++#ifdef __cplusplus
++extern "C" {
++#endif
++
++/* --------------------------------------------------------------------------
++** Just include definitions from bcmtypes.h
++*/
++#include <bcmtypes.h>
++
++#undef EPT_TEST
++
++#if !defined( HAUS_SINT16_DEFINED )
++#define HAUS_SINT16_DEFINED
++typedef signed short SINT16; /* SINT16 is platform independant */
++#endif
++
++
++#if !defined( HAUS_SINT32_DEFINED )
++#define HAUS_SINT32_DEFINED
++typedef signed long SINT32;
++#endif
++
++#define SUCCESS 0
++#define FAILURE 1
++
++
++// GNU definition imported from cxc_compiler.h
++#define CXC_INLINE __inline__
++
++// Endian-ness imported from cxc_cpu.h
++#define CXC_CPU_BIG_ENDIAN 1
++#define CXC_CPU_LITTLE_ENDIAN 0
++
++#if defined(__KERNEL__)
++#define CXC_OS_LINUX 1
++#define PSOS 0
++#define VXWORKS 0
++#endif
++
++#ifdef __cplusplus
++}
++#endif
++
++#endif /* CXC_ENV_H */
+diff -urN linux-2.6.8.1/bcmdrivers/broadcom/include/bcm963xx/cxcLog.h linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/include/bcm963xx/cxcLog.h
+--- linux-2.6.8.1/bcmdrivers/broadcom/include/bcm963xx/cxcLog.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/include/bcm963xx/cxcLog.h 2006-06-26 09:07:10.000000000 +0200
+@@ -0,0 +1,34 @@
++/***************************************************************************
++* Copyright 2000 Broadcom Corporation
++* All Rights Reserved
++* No portions of this material may be reproduced in any form without the
++* written permission of:
++* Broadcom Corporation
++* 16251 Laguna Canyon Road
++* Irvine, California 92618
++* All information contained in this document is Broadcom Corporation
++* company private, proprietary, and trade secret.
++*
++****************************************************************************
++*
++* Filename: log.h
++* Creation Date: 17 September 2001 (v0.00)
++* VSS Info:
++* $Revision: 3 $
++* $Date: 11/13/02 3:42p $
++*
++****************************************************************************
++* Description:
++*
++* This filename is preserved in order to minimize the changes
++* in the endpoint code, which is shared with the Cablex endpoint.
++* cxcLog.h simply includes log.h, which contains the log macros.
++*
++****************************************************************************/
++
++#ifndef CXC_LOG_H
++#define CXC_LOG_H
++
++#include <log.h>
++
++#endif /* CXC_LOG_H */
+diff -urN linux-2.6.8.1/bcmdrivers/broadcom/include/bcm963xx/endpointdrv.h linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/include/bcm963xx/endpointdrv.h
+--- linux-2.6.8.1/bcmdrivers/broadcom/include/bcm963xx/endpointdrv.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/include/bcm963xx/endpointdrv.h 2006-06-26 09:07:10.000000000 +0200
+@@ -0,0 +1,243 @@
++/***************************************************************************
++ * Broadcom Corp. Confidential
++ * Copyright 2001 Broadcom Corp. All Rights Reserved.
++ *
++ * THIS SOFTWARE MAY ONLY BE USED SUBJECT TO AN EXECUTED
++ * SOFTWARE LICENSE AGREEMENT BETWEEN THE USER AND BROADCOM.
++ * YOU HAVE NO RIGHT TO USE OR EXPLOIT THIS MATERIAL EXCEPT
++ * SUBJECT TO THE TERMS OF SUCH AN AGREEMENT.
++ *
++ ***************************************************************************
++ * File Name : EndpointDrv.h
++ *
++ * Description: This file contains the definitions and structures for the
++ * Linux IOCTL interface that used between the user mode Endpoint
++ * API library and the kernel Endpoint API driver.
++ *
++ * Updates : 04/04/2002 YD. Created.
++ ***************************************************************************/
++
++#if !defined(_ENDPOINTDRV_H_)
++#define _ENDPOINTDRV_H_
++
++#if defined(__cplusplus)
++extern "C" {
++#endif
++
++/* Includes. */
++#include <bcmtypes.h>
++#include <vrgEndpt.h>
++#include <endptvoicestats.h>
++
++/* Maximum size for the event data passed with the event callback */
++#define MAX_EVENTDATA_SIZE 256
++
++typedef enum ENDPOINTIOCTL_INDEX
++{
++ ENDPTIO_INIT_INDEX = 0,
++ ENDPTIO_DEINIT_INDEX,
++ ENDPTIO_CREATE_INDEX,
++ ENDPTIO_CAPABILITIES_INDEX,
++ ENDPTIO_SIGNAL_INDEX,
++ ENDPTIO_CREATE_CONNECTION_INDEX,
++ ENDPTIO_MODIFY_CONNECTION_INDEX,
++ ENDPTIO_DELETE_CONNECTION_INDEX,
++ ENDPTIO_PACKET_INDEX,
++ ENDPTIO_GET_PACKET_INDEX,
++ ENDPTIO_GET_EVENT_INDEX,
++ ENDPTIO_GET_CODECMAP_INDEX,
++ ENDPTIO_VOICESTAT_INDEX,
++ ENDPTIO_ISINITIALIZED_INDEX,
++ ENDPTIO_CONSOLE_CMD_INDEX,
++ ENDPTIO_TEST_INDEX,
++ ENDPTIO_ENDPOINTCOUNT_INDEX,
++ ENDPTIO_MAX_INDEX
++} ENDPOINTIOCTL_INDEX;
++
++
++/* Defines. */
++#define ENDPOINTDRV_MAJOR 209 /* arbitrary unused value */
++
++#define ENDPOINTIOCTL_ENDPT_INIT \
++ _IOWR(ENDPOINTDRV_MAJOR, ENDPTIO_INIT_INDEX, ENDPOINTDRV_INIT_PARAM)
++
++#define ENDPOINTIOCTL_ENDPT_DEINIT \
++ _IOWR(ENDPOINTDRV_MAJOR, ENDPTIO_DEINIT_INDEX, ENDPOINTDRV_INIT_PARAM)
++
++#define ENDPOINTIOCTL_ENDPT_CREATE \
++ _IOWR(ENDPOINTDRV_MAJOR, ENDPTIO_CREATE_INDEX, ENDPOINTDRV_CREATE_PARM)
++
++#define ENDPOINTIOCTL_ENDPT_CAPABILITIES \
++ _IOWR(ENDPOINTDRV_MAJOR, ENDPTIO_CAPABILITIES_INDEX, ENDPOINTDRV_CAP_PARM)
++
++#define ENDPOINTIOCTL_ENDPT_SIGNAL \
++ _IOWR(ENDPOINTDRV_MAJOR, ENDPTIO_SIGNAL_INDEX, ENDPOINTDRV_SIGNAL_PARM)
++
++#define ENDPOINTIOCTL_ENDPT_CREATE_CONNECTION \
++ _IOWR(ENDPOINTDRV_MAJOR, ENDPTIO_CREATE_CONNECTION_INDEX, ENDPOINTDRV_CONNECTION_PARM)
++
++#define ENDPOINTIOCTL_ENDPT_MODIFY_CONNECTION \
++ _IOWR(ENDPOINTDRV_MAJOR, ENDPTIO_MODIFY_CONNECTION_INDEX, ENDPOINTDRV_CONNECTION_PARM)
++
++#define ENDPOINTIOCTL_ENDPT_DELETE_CONNECTION \
++ _IOWR(ENDPOINTDRV_MAJOR, ENDPTIO_DELETE_CONNECTION_INDEX, ENDPOINTDRV_DELCONNECTION_PARM)
++
++#define ENDPOINTIOCTL_ENDPT_PACKET \
++ _IOWR(ENDPOINTDRV_MAJOR, ENDPTIO_PACKET_INDEX, ENDPOINTDRV_PACKET_PARM)
++
++#define ENDPOINTIOCTL_ENDPT_GET_PACKET \
++ _IOWR(ENDPOINTDRV_MAJOR, ENDPTIO_GET_PACKET_INDEX, ENDPOINTDRV_PACKET_PARM)
++
++#define ENDPOINTIOCTL_ENDPT_GET_EVENT \
++ _IOWR(ENDPOINTDRV_MAJOR, ENDPTIO_GET_EVENT_INDEX, ENDPOINTDRV_EVENT_PARM)
++
++#define ENDPOINTIOCTL_ENDPT_GET_CODECMAP \
++ _IOWR(ENDPOINTDRV_MAJOR, ENDPTIO_GET_CODECMAP_INDEX, ENDPOINTDRV_CODECMAP_PARM)
++
++#define ENDPOINTIOCTL_ENDPT_VOICESTAT \
++ _IOWR(ENDPOINTDRV_MAJOR, ENDPTIO_VOICESTAT_INDEX, ENDPOINTDRV_VOICESTAT_PARM)
++
++#define ENDPOINTIOCTL_ISINITIALIZED \
++ _IOWR(ENDPOINTDRV_MAJOR, ENDPTIO_ISINITIALIZED_INDEX, ENDPOINTDRV_ISINITIALIZED_PARM)
++
++#define ENDPOINTIOCTL_ENDPT_CONSOLE_CMD \
++ _IOWR(ENDPOINTDRV_MAJOR, ENDPTIO_CONSOLE_CMD_INDEX, ENDPOINTDRV_CONSOLE_CMD_PARM)
++
++#define ENDPOINTIOCTL_TEST \
++ _IOWR(ENDPOINTDRV_MAJOR, ENDPTIO_TEST_INDEX, ENDPOINTDRV_TESTPARM)
++
++#define ENDPOINTIOCTL_ENDPOINTCOUNT \
++ _IOWR(ENDPOINTDRV_MAJOR, ENDPTIO_ENDPOINTCOUNT_INDEX, ENDPOINTDRV_ENDPOINTCOUNT_PARM)
++
++#define MAX_ENDPOINTDRV_IOCTL_COMMANDS ENDPTIO_MAX_INDEX
++
++
++typedef struct
++{
++ UINT32 size; /* Size of the structure (including the size field) */
++ VRG_COUNTRY country;
++ EPSTATUS epStatus;
++} ENDPOINTDRV_INIT_PARAM, *PENDPOINTDRV_INIT_PARAM;
++
++typedef struct
++{
++ UINT32 size; /* Size of the structure (including the size field) */
++ UINT32 physId;
++ UINT32 lineId;
++ VRG_ENDPT_STATE* endptState;
++ EPSTATUS epStatus;
++} ENDPOINTDRV_CREATE_PARM, *PENDPOINTDRV_CREATE_PARM;
++
++typedef struct
++{
++ UINT32 size; /* Size of the structure (including the size field) */
++ EPZCAP* capabilities;
++ ENDPT_STATE* state;
++ EPSTATUS epStatus;
++} ENDPOINTDRV_CAP_PARM, *PENDPOINTDRV_CAP_PARM;
++
++typedef struct
++{
++ UINT32 size; /* Size of the structure (including the size field) */
++ ENDPT_STATE* state;
++ UINT32 cnxId;
++ EPSIG signal;
++ UINT32 value; // Reserve an array, can be a pointer
++ EPSTATUS epStatus;
++ int duration;
++ int period;
++ int repetition;
++} ENDPOINTDRV_SIGNAL_PARM, *PENDPOINTDRV_SIGNAL_PARM;
++
++typedef struct
++{
++ UINT32 size; /* Size of the structure (including the size field) */
++ ENDPT_STATE* state;
++ int cnxId;
++ EPZCNXPARAM* cnxParam;
++ EPSTATUS epStatus;
++} ENDPOINTDRV_CONNECTION_PARM, *PENDPOINTDRV_CONNECTION_PARM;
++
++typedef struct
++{
++ UINT32 size; /* Size of the structure (including the size field) */
++ ENDPT_STATE* state;
++ int cnxId;
++ EPSTATUS epStatus;
++} ENDPOINTDRV_DELCONNECTION_PARM, *PENDPOINTDRV_DELCONNECTION_PARM;
++
++typedef struct
++{
++ UINT32 size; /* Size of the structure (including the size field) */
++ ENDPT_STATE* state;
++ int cnxId;
++ EPPACKET* epPacket;
++ int length;
++ UINT32 bufDesc;
++ EPSTATUS epStatus;
++} ENDPOINTDRV_PACKET_PARM, *PENDPOINTDRV_PACKET_PARM;
++
++typedef struct
++{
++ UINT32 size; /* Size of the structure (including the size field) */
++ int lineId;
++ int cnxId;
++ int length;
++ EPEVT event;
++ UINT8 eventData[MAX_EVENTDATA_SIZE];
++} ENDPOINTDRV_EVENT_PARM, *PENDPOINTDRV_EVENT_PARM;
++
++typedef struct
++{
++ UINT32 size; /* Size of the structure (including the size field) */
++ int isInitialized;
++} ENDPOINTDRV_ISINITIALIZED_PARM, *PENDPOINTDRV_ISINITIALIZED_PARM;
++
++typedef struct
++{
++ UINT32 size; /* Size of the structure (including the size field) */
++ UINT32 testParm1;
++ UINT32 testParm2;
++ EPZCNXPARAM* testParm3;
++ EPSTATUS epStatus;
++} ENDPOINTDRV_TESTPARM, *PENDPOINTDRV_TESTPARM;
++
++typedef struct ENDPOINTDRV_PACKET
++{
++ UINT32 size; /* Size of the structure (including the size field) */
++ int cnxId;
++ int length;
++ EPMEDIATYPE mediaType;
++ UINT8 data[1024];
++} ENDPOINTDRV_PACKET;
++
++typedef struct ENDPOINTDRV_VOICESTAT_PARM
++{
++ int lineId;
++ ENDPT_VOICE_STATS* stats;
++ EPSTATUS epStatus;
++} ENDPOINTDRV_VOICESTAT_PARM, *PENDPOINTDRV_VOICESTAT_PARM;
++
++typedef struct ENDPOINTDRV_CONSOLE_CMD_PARM
++{
++ UINT32 size; /* Size of the structure (including the size field) */
++ int lineId;
++ int cnxId;
++ int cmd;
++ ENDPT_STATE* state;
++ EPSTATUS epStatus;
++} ENDPOINTDRV_CONSOLE_CMD_PARM, *PENDPOINTDRV_CONSOLE_CMD_PARM;
++
++
++typedef struct
++{
++ UINT32 size; /* Size of the structure (including the size field) */
++ int endpointNum;
++} ENDPOINTDRV_ENDPOINTCOUNT_PARM, *PENDPOINTDRV_ENDPOINTCOUNT_PARM;
++
++
++#if defined(__cplusplus)
++}
++#endif
++
++#endif // _ENDPOINTDRV_H_
+diff -urN linux-2.6.8.1/bcmdrivers/broadcom/include/bcm963xx/endptvoicestats.h linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/include/bcm963xx/endptvoicestats.h
+--- linux-2.6.8.1/bcmdrivers/broadcom/include/bcm963xx/endptvoicestats.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/include/bcm963xx/endptvoicestats.h 2006-06-26 09:07:10.000000000 +0200
+@@ -0,0 +1,106 @@
++/***************************************************************************
++ * Broadcom Corp. Confidential
++ * Copyright 2001 Broadcom Corp. All Rights Reserved.
++ *
++ * THIS SOFTWARE MAY ONLY BE USED SUBJECT TO AN EXECUTED
++ * SOFTWARE LICENSE AGREEMENT BETWEEN THE USER AND BROADCOM.
++ * YOU HAVE NO RIGHT TO USE OR EXPLOIT THIS MATERIAL EXCEPT
++ * SUBJECT TO THE TERMS OF SUCH AN AGREEMENT.
++ *
++ ***************************************************************************
++ * File Name : endptvoicestats.h
++ *
++ * Description: This file contains the definitions of the voice statistics
++ * structures. This file should be used in user space when
++ * working with the voice statistics structure.
++ *
++ * The files hpnet.h and hppve.h
++ * should not be included in user space because of a conflict
++ * in the definitions supplied by hausenv.h (in the endpoint/vocm/
++ * ldxIntf/dspinc directory) and the definitions supplied by bcmtypes.h
++ * (in the /sgibcm_2_4_17/linux/include/asm-mips/bcm96345 directory).
++ *
++ * Updates :
++ ***************************************************************************/
++
++#if !defined(ENDPTSTATS_H)
++#define ENDPTSTATS_H
++
++#if defined(__cplusplus)
++extern "C" {
++#endif
++
++typedef struct
++{
++#ifdef ENDPT_6345
++ UINT16 peakHoldingTime; /* Peak Holding Time since last statistic */
++
++ /* Total number of superpackets arriving on the egress path */
++ UINT16 packetCount; /* # of packets received */
++
++ /* addTail and reorder are successful additions to the JB */
++ /* addTail is typically 1..N times the packetCount if superpackets are enabled */
++ UINT16 addTailCount; /* # of frames added to tail of JB - normal case */
++ UINT16 reorderCount; /* # of frames reordered */
++
++ /* overrun, duplicate, outOfRange, tooLate, jitterMax excess are packets that have been discarded */
++ UINT16 overrunCount; /* Decoder overrun count */
++ UINT16 duplicateCount; /* # of duplicate frames deleted */
++ UINT16 outOfRangeCount; /* # of frames with timestamps too far from current TS to be handled */
++ UINT16 tooLateCount; /* Packet arrived too late (it's redundant mate already played) */
++
++ /* cantDecode are packets that can't be played out due to algorithm not available */
++ UINT16 cantDecodeCount; /* Can't decode packet - decoder not in load or pkt hdr bad */
++
++ /* The following are internal to the AJC module - they do not represent physical packets */
++ UINT16 ajcUnderrunCount; /* Adaptive Jitter Control: jitter buffer underruns */
++ UINT16 ajcDeleteCount; /* Adaptive Jitter Control: # of packet deletes done to reduce holding time */
++ UINT16 ajcRepeatCount; /* Adaptive Jitter Control: # of packet repeats done to either increase holding time
++ or due to late frame or lost frames. */
++ UINT16 ajcResyncCount; /* Number of times ajb resynced (went through buildout state) */
++ UINT16 ajcPhaseJitterCount; /* Number of times ajb inserted a phase discontinuity
++ (possibly in silence or during CNG or due to a repeat/delete). */
++ /* 14 entries. Make sure this is even (!) */
++#else
++ UINT16 peakHoldingTime; /* Peak Holding Time since last statistic */
++ UINT16 minimumHoldingTime; /* Long-term tracker of min. Hold Time */
++ UINT16 targetHoldingTime; /* Target holding Time */
++ UINT16 inactiveFrameCount; /* Inactive Frame Count */
++ UINT16 activeFrameCount; /* Active Frame Count */
++ UINT16 hsxDecoderOverrunCount; /* Decoder overrun count */
++ UINT16 hsxDecoderUnderrunCount; /* Decoder underrun count */
++ UINT16 lostFrameCount; /* Lost frames resulting in frame repeat */
++#endif
++} ENDPT_VOICE_DECODERSTATS;
++
++/* Encoder Statistics */
++typedef struct
++{
++#ifdef ENDPT_6345
++ UINT16 inactiveFrameCount; /* Inactive Frame Count of Suppressed Frames*/
++ UINT16 activeFrameCount; /* Active Frame Count - actually sent ingress */
++ UINT16 sidFrameCount; /* SID Frame Count */
++ UINT16 toneRelayCount; /* # of tone packets from PTE relayed ingress */
++#else
++ UINT16 hsxEncoderOverrunCount; /* Encoder overrun count */
++#endif
++} ENDPT_VOICE_ENCODERSTATS;
++
++
++typedef struct
++{
++ ENDPT_VOICE_DECODERSTATS decoder;
++ ENDPT_VOICE_ENCODERSTATS encoder;
++} ENDPT_VOICE_PVE_STATS;
++
++typedef struct
++{
++ ENDPT_VOICE_PVE_STATS hsxPVEstats; /* statistics for PVE encoder and decoder */
++
++} ENDPT_VOICE_STATS;
++
++#if defined(__cplusplus)
++}
++#endif
++
++#endif /* ENDPTSTATS_H */
+diff -urN linux-2.6.8.1/bcmdrivers/broadcom/include/bcm963xx/log.h linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/include/bcm963xx/log.h
+--- linux-2.6.8.1/bcmdrivers/broadcom/include/bcm963xx/log.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/include/bcm963xx/log.h 2006-06-26 09:07:10.000000000 +0200
+@@ -0,0 +1,104 @@
++/***************************************************************************
++* Copyright 2000 Broadcom Corporation
++* All Rights Reserved
++* No portions of this material may be reproduced in any form without the
++* written permission of:
++* Broadcom Corporation
++* 16251 Laguna Canyon Road
++* Irvine, California 92618
++* All information contained in this document is Broadcom Corporation
++* company private, proprietary, and trade secret.
++*
++****************************************************************************
++*
++* Filename: log.h
++* Creation Date: 4 July 2000 (v0.00)
++* VSS Info:
++* $Revision: 23 $
++* $Date: 9/14/01 4:54p $
++*
++****************************************************************************
++* Description:
++*
++* This header file contains the needed macros and function prototypes
++* for logging on the terminal.
++*
++****************************************************************************/
++
++#ifndef LOG_H
++#define LOG_H
++
++#ifdef __cplusplus
++extern "C" {
++#endif
++
++#define LOG_DBG
++
++#if (! (defined(__KERNEL__) || defined (LINUX)) )
++
++extern void Log( char const *format,...);
++extern void LogMsg( char *string );
++extern void LogDirectSerial( char const *format,...);
++
++#define PANIC(m) Log(m)
++#define LOG(fmt) Log fmt
++#define LOGERROR(fmt) Log fmt
++#define LOG1(fmt) Log fmt /* Level 1 logging */
++#define LOG2(fmt) /* Level 2 logging */
++#define LOGMSG(buf) LogMsg buf
++
++/***********************************
++** Error logging *
++***********************************/
++#elif defined(__KERNEL__)
++
++#define LOG(fmt) printk fmt ; printk("\n");
++#define LOG_RAW(fmt) printk fmt ; printk("\n");
++#define PANIC(fmt) printk("!!! PANIC !!! \n"); printk fmt ; printk("\n");
++#define LOGERROR(fmt) printk("!!! ERROR !!! \n"); printk fmt ; printk("\n");
++
++#elif defined(LINUX)
++
++#include <stdio.h>
++
++#ifdef LOG_DBG
++
++#include <time.h>
++
++#define LOG(fmt) \
++{ \
++ struct tm *tm_ptr; \
++ time_t curtime; \
++ time( &curtime ); \
++ tm_ptr = gmtime( &curtime ); \
++ printf("%02d:%02d:%02d ", \
++ tm_ptr->tm_hour, \
++ tm_ptr->tm_min, \
++ tm_ptr->tm_sec); \
++ printf fmt; \
++ printf("\n"); \
++}
++#else
++#define LOG(fmt) printf fmt ; printf("\n");
++#endif /* LOG_DBG */
++
++#define PANIC(fmt) printk("!!! PANIC !!! \n"); printk fmt ; printk("\n");
++#define LOGERROR(fmt) \
++{ \
++ printf("ERROR !!! File %s (line %u): ", __FILE__, __LINE__);\
++ printf fmt; \
++ printf("\n"); \
++}
++
++#else
++#error Unknown OS
++#endif
++
++#ifdef __cplusplus
++ }
++#endif
++
++#endif /* LOG_H */
++
++
++
+diff -urN linux-2.6.8.1/bcmdrivers/broadcom/include/bcm963xx/mtacfg.h linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/include/bcm963xx/mtacfg.h
+--- linux-2.6.8.1/bcmdrivers/broadcom/include/bcm963xx/mtacfg.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/include/bcm963xx/mtacfg.h 2006-06-26 09:07:10.000000000 +0200
+@@ -0,0 +1,72 @@
++/***************************************************************************
++* Copyright 2000 Broadcom Corporation
++* All Rights Reserved
++* No portions of this material may be reproduced in any form without the
++* written permission of:
++* Broadcom Corporation
++* 16251 Laguna Canyon Road
++* Irvine, California 92618
++* All information contained in this document is Broadcom Corporation
++* company private, proprietary, and trade secret.
++*
++****************************************************************************
++*
++* Filename: mtacfg.h
++* Creation Date: 4 July 2000 (v0.00)
++* VSS Info:
++* $Revision: 23 $
++* $Date: 9/14/01 4:54p $
++*
++****************************************************************************
++* Description:
++*
++* This header file contains all the different build options that
++* are required by CablexChange components.
++*
++****************************************************************************/
++
++#ifndef _MTACFG_H
++#define _MTACFG_H
++
++#ifdef __cplusplus
++extern "C" {
++#endif
++
++#include <cfg/endptCfg.h>
++#include <cfg/vocmCfg.h>
++#include <cfg/casCfg.h>
++
++#define MTA_VERSION_INFO "1.0"
++
++#if ( defined(IP_MGCP) || defined(IP_H323) || defined(IP_SIP) || defined(IP_MEGACO) )
++#define VOIP
++#endif
++
++#ifndef VOIP
++#define ENDPOINT_NULL_SHIM
++#endif
++
++
++/***************************************************************
++** Task Priority options
++****************************************************************/
++
++#define RTP_TASK_PRIORITY BCMOS_TASK_PRTY_8 /* task priority for rtp */
++#define HGCP_TASK_PRIORITY BCMOS_TASK_PRTY_8 /* task priority for HGCP */
++#define RTCP_TASK_PRIORITY BCMOS_TASK_PRTY_13 /* task priority for rtcp */
++
++
++/* Additional DSL specific definitions not provided by Cable Cfg files */
++
++/* For backward compatibility with older code */
++#define MAX_ENDPT VOCM_CFG_MAX_ENDPT
++#define MAX_CNX VOCM_CFG_MAX_CNX
++
++#ifdef __cplusplus
++ }
++#endif
++
++#endif /* MTACFG_H */
++
++
++
+diff -urN linux-2.6.8.1/bcmdrivers/broadcom/include/bcm963xx/profdrv.h linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/include/bcm963xx/profdrv.h
+--- linux-2.6.8.1/bcmdrivers/broadcom/include/bcm963xx/profdrv.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/include/bcm963xx/profdrv.h 2006-06-26 09:07:10.000000000 +0200
+@@ -0,0 +1,151 @@
++/***************************************************************************
++* Copyright 2004 Broadcom Corporation
++* All Rights Reserved
++* No portions of this material may be reproduced in any form without the
++* written permission of:
++* Broadcom Corporation
++* 16215 Alton Parkway
++* P.O. Box 57013
++* Irvine, California 92619-7013
++* All information contained in this document is Broadcom Corporation
++* company private, proprietary, and trade secret.
++*
++****************************************************************************
++*
++* Filename: profdrv.h
++*
++****************************************************************************
++* Description:
++*
++* This file contains the profiler device driver
++*
++****************************************************************************/
++#ifndef PROFDRV_DEVICE_DRIVER__H__INCLUDED
++#define PROFDRV_DEVICE_DRIVER__H__INCLUDED
++
++#include <linux/ioctl.h>
++
++#ifdef __cplusplus
++extern "C" {
++#endif
++
++#define PROFILER_NAME_MAX_LENGTH 32
++#define PROFILER_MAX_RECSEQ 2048
++
++#define PROFILER_CPU_UTIL_VALID_START 0x01
++#define PROFILER_CPU_UTIL_VALID_STOP 0x02
++
++#define PROFILER_SOURCE_USER 0x00
++#define PROFILER_SOURCE_KERNEL 0x01
++
++#ifndef __STR
++#define __STR(x) #x
++#endif
++#ifndef STR
++#define STR(x) __STR(x)
++#endif
++
++#define profdrv_read_32bit_cp0_register(source) \
++({ int __res; \
++ __asm__ __volatile__( \
++ ".set\tpush\n\t" \
++ ".set\treorder\n\t" \
++ "mfc0\t%0,"STR(source)"\n\t" \
++ ".set\tpop" \
++ : "=r" (__res)); \
++ __res;})
++
++/*
++ Structure used to pass profiling information data at the user/kernel interface.
++*/
++typedef struct
++{
++ char name[PROFILER_NAME_MAX_LENGTH];
++
++} PROFILER_IOCTL_DATA;
++
++/*
++ This structure is used to keep track of the CPU utilization during the profiling period.
++*/
++typedef struct
++{
++ unsigned tick_uptime_start;
++ unsigned tick_idle_start;
++ unsigned tick_user_start;
++ unsigned tick_kernel_start;
++ unsigned tick_uptime_stop;
++ unsigned tick_idle_stop;
++ unsigned tick_user_stop;
++ unsigned tick_kernel_stop;
++ unsigned char valid_data;
++
++} PROFILER_CPU_UTILIZATION;
++
++/*
++ A generic structure to pass information about the profiler status.
++*/
++typedef struct
++{
++ unsigned status;
++ unsigned cpu_jiffies_start;
++ unsigned cpu_jiffies_stop;
++ unsigned cpu_jiffies_factor;
++ unsigned cpu_clock;
++
++} PROFILER_STATUS;
++
++/*
++ The ioctl action index.
++*/
++typedef enum
++{
++ PROFILER_IOCTL_GET_DATA_DUMP_INDEX,
++ PROFILER_IOCTL_GET_RECSEQ_DATA_DUMP_INDEX,
++ PROFILER_IOCTL_SET_DATA_CLEAN_INDEX,
++ PROFILER_IOCTL_SET_PROF_OPS_INDEX,
++ PROFILER_IOCTL_REGISTER_CALL_INDEX,
++ PROFILER_IOCTL_DEREGISTER_CALL_INDEX,
++ PROFILER_IOCTL_START_CALL_INDEX,
++ PROFILER_IOCTL_STOP_CALL_INDEX,
++ PROFILER_IOCTL_PROFILER_STATUS_INDEX,
++ PROFILER_IOCTL_SET_CPU_UTIL_INDEX,
++ PROFILER_IOCTL_GET_CPU_UTIL_INDEX,
++ PROFILER_IOCTL_GET_RECSEQ_DI_INDEX
++
++} PROFILER_IOCTL_INDEX;
++
++/*
++ Assigning a device driver major number for the sake of making this application work
++*/
++#define PROFDRV_DEVICE_DRIVER_MAJOR 224
++
++#define PROFILER_IOCTL_GET_DATA_DUMP \
++ _IOR( PROFDRV_DEVICE_DRIVER_MAJOR, PROFILER_IOCTL_GET_DATA_DUMP_INDEX, unsigned )
++#define PROFILER_IOCTL_GET_RECSEQ_DATA_DUMP \
++ _IOR( PROFDRV_DEVICE_DRIVER_MAJOR, PROFILER_IOCTL_GET_RECSEQ_DATA_DUMP_INDEX, unsigned )
++#define PROFILER_IOCTL_SET_DATA_CLEAN \
++ _IOW( PROFDRV_DEVICE_DRIVER_MAJOR, PROFILER_IOCTL_SET_DATA_CLEAN_INDEX, unsigned )
++#define PROFILER_IOCTL_SET_PROF_OPS \
++ _IOW( PROFDRV_DEVICE_DRIVER_MAJOR, PROFILER_IOCTL_SET_PROF_OPS_INDEX, unsigned )
++#define PROFILER_IOCTL_REGISTER_CALL \
++ _IOW( PROFDRV_DEVICE_DRIVER_MAJOR, PROFILER_IOCTL_REGISTER_CALL_INDEX, PROFILER_IOCTL_DATA )
++#define PROFILER_IOCTL_DEREGISTER_CALL \
++ _IOW( PROFDRV_DEVICE_DRIVER_MAJOR, PROFILER_IOCTL_DEREGISTER_CALL_INDEX, PROFILER_IOCTL_DATA )
++#define PROFILER_IOCTL_START_CALL \
++ _IOW( PROFDRV_DEVICE_DRIVER_MAJOR, PROFILER_IOCTL_START_CALL_INDEX, PROFILER_IOCTL_DATA )
++#define PROFILER_IOCTL_STOP_CALL \
++ _IOW( PROFDRV_DEVICE_DRIVER_MAJOR, PROFILER_IOCTL_STOP_CALL_INDEX, PROFILER_IOCTL_DATA )
++#define PROFILER_IOCTL_PROFILER_STATUS_DATA \
++ _IOR( PROFDRV_DEVICE_DRIVER_MAJOR, PROFILER_IOCTL_PROFILER_STATUS_INDEX, PROFILER_STATUS )
++#define PROFILER_IOCTL_SET_CPU_UTIL \
++ _IOW( PROFDRV_DEVICE_DRIVER_MAJOR, PROFILER_IOCTL_SET_CPU_UTIL_INDEX, PROFILER_CPU_UTILIZATION )
++#define PROFILER_IOCTL_GET_CPU_UTIL \
++ _IOR( PROFDRV_DEVICE_DRIVER_MAJOR, PROFILER_IOCTL_GET_CPU_UTIL_INDEX, PROFILER_CPU_UTILIZATION )
++#define PROFILER_IOCTL_GET_RECSEQ_DATA_INDEX \
++ _IOR( PROFDRV_DEVICE_DRIVER_MAJOR, PROFILER_IOCTL_GET_RECSEQ_DI_INDEX, unsigned )
++
++#ifdef __cplusplus
++}
++#endif
++
++#endif /* PROFDRV_DEVICE_DRIVER__H__INCLUDED */
+diff -urN linux-2.6.8.1/bcmdrivers/broadcom/include/bcm963xx/profiler.h linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/include/bcm963xx/profiler.h
+--- linux-2.6.8.1/bcmdrivers/broadcom/include/bcm963xx/profiler.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.8.1-brcm63xx/bcmdrivers/broadcom/include/bcm963xx/profiler.h 2006-06-26 09:07:10.000000000 +0200
+@@ -0,0 +1,114 @@
++/***************************************************************************
++* Copyright 2004 Broadcom Corporation
++* All Rights Reserved
++* No portions of this material may be reproduced in any form without the
++* written permission of:
++* Broadcom Corporation
++* 16215 Alton Parkway
++* P.O. Box 57013
++* Irvine, California 92619-7013
++* All information contained in this document is Broadcom Corporation
++* company private, proprietary, and trade secret.
++*
++****************************************************************************
++*
++* Filename: profiler.h
++*
++****************************************************************************
++* Description:
++*
++* This file contains the API definition for usage of the profiler tool
++*
++****************************************************************************/
++#ifndef PROFILER__H__INCLUDED
++#define PROFILER__H__INCLUDED
++
++#include "profdrv.h"
++
++#ifdef __cplusplus
++extern "C" {
++#endif
++
++#define PROFILER_MAX_MONITORED_PROFILE 32
++#define PROFILER_CPU_UTILIZATION_MIN 0.000001
++#define PROFILER_MISC_STRING_LENGTH 256
++#define PROFILER_CPU_TICK_FACTOR 2.0
++#define PROFILER_S2MS_FACTOR 1000.0
++
++#define PROFILER_FLAG_RESOURCE_FREE 0x00
++#define PROFILER_FLAG_RESOURCE_ALLOCATED 0x01
++#define PROFILER_FLAG_RESOURCE_ERROR 0x02
++#define PROFILER_FLAG_RESOURCE_COLLECT_PENDING 0x04
++
++/*
++ This structure defines the data collected by the profiler.
++*/
++typedef struct
++{
++ unsigned char source; /* User or Kernel */
++ unsigned char flag; /* Generic flag */
++ char name[PROFILER_NAME_MAX_LENGTH]; /* Name of the function monitored */
++ unsigned int now_cycle; /* The current cycle count saved */
++ unsigned int min_cycle; /* The minimum number of cycles calculated for this function */
++ unsigned int max_cycle; /* The maximum number of cycles calculated for this function */
++ unsigned int avg_cycle; /* The average numnber of cycles calculated for this function */
++ unsigned int count; /* The number of time this function has been profiled */
++
++} PROFILER_COLLECTED_DATA;
++
++
++/*
++ This structure defines the recorded sequence data collected by the profiler.
++*/
++typedef struct PROFILER_RECSEQ_DATA
++{
++ unsigned int id;
++ unsigned long startTime;
++ unsigned long endTime;
++} PROFILER_RECSEQ_DATA;
++
++
++void kernel_profiler_register( char *pName, unsigned char src );
++void kernel_profiler_deregister( char *pName, unsigned char src );
++void kernel_profiler_start( char *pName, unsigned char src );
++void kernel_profiler_stop( char *pName, unsigned char src );
++void kernel_profiler_recseq_start( unsigned int id );
++void kernel_profiler_recseq_stop( unsigned int id );
++
++void kernel_profiler_reinit_collected( void );
++void kernel_profiler_dump( void );
++void kernel_profiler_recseq_dump( void );
++void kernel_profiler_start_collect( void );
++void kernel_profiler_stop_collect( void );
++
++
++void profiler_init( void );
++void profiler_get_status( PROFILER_STATUS *pStatus );
++PROFILER_COLLECTED_DATA *profiler_get_data_dump( void );
++PROFILER_RECSEQ_DATA* profiler_get_recseq_data_dump( void );
++void profiler_get_cpu_util( PROFILER_CPU_UTILIZATION *pData );
++void profiler_set_cpu_util( PROFILER_CPU_UTILIZATION *pData );
++unsigned int profiler_get_recseq_data_index( void );
++
++/*
++ This is the generic API that should be used by clients to access the profiler
++*/
++#define PROFILER_REGISTER( name ) ( kernel_profiler_register( (name), PROFILER_SOURCE_KERNEL ) )
++#define PROFILER_DEREGISTER( name ) ( kernel_profiler_deregister( (name), PROFILER_SOURCE_KERNEL ) )
++#define PROFILER_START( name ) ( kernel_profiler_start( (name), PROFILER_SOURCE_KERNEL ) )
++#define PROFILER_STOP( name ) ( kernel_profiler_stop( (name), PROFILER_SOURCE_KERNEL ) )
++#define PROFILER_RECSEQ_START( source ) ( kernel_profiler_recseq_start( (source) ) )
++#define PROFILER_RECSEQ_STOP( source ) ( kernel_profiler_recseq_stop( (source)) )
++
++#define PROFILER_REINIT_COLLECTED() ( kernel_profiler_reinit_collected() )
++#define PROFILER_DUMP() ( kernel_profiler_dump() )
++#define PROFILER_RECSEQ_DUMP() ( kernel_profiler_recseq_dump() )
++#define PROFILER_START_COLLECT() ( kernel_profiler_start_collect() )
++#define PROFILER_STOP_COLLECT() ( kernel_profiler_stop_collect() )
++
++
++#ifdef __cplusplus
++}
++#endif
++
++#endif /* PROFILER__H__INCLUDED */
+diff -urN linux-2.6.8.1/bcmdrivers/opensource/Makefile linux-2.6.8.1-brcm63xx/bcmdrivers/opensource/Makefile
+--- linux-2.6.8.1/bcmdrivers/opensource/Makefile 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.8.1-brcm63xx/bcmdrivers/opensource/Makefile 2006-06-26 09:07:10.000000000 +0200
+@@ -0,0 +1,26 @@
++# File: modules/drivers/Makefile
++#
++# Makefile for the GPLed Linux kernel modules.
++#
++BRCM_BOARD:=bcm963xx
++BRCM_CHIP:=6348
++LN_NAME=bcm9$(BRCM_CHIP)
++LN_DRIVER_DIRS =
++
++-include $(KERNEL_DIR)/.config
++
++ifneq ($(CONFIG_BCM_BOARD),)
++ LN_DRIVER_DIRS +=ln -sn impl$(CONFIG_BCM_BOARD_IMPL) char/board/$(BRCM_BOARD)/$(LN_NAME);
++endif
++
++ifneq ($(CONFIG_BCM_SERIAL),)
++ LN_DRIVER_DIRS +=ln -sn impl$(CONFIG_BCM_SERIAL_IMPL) char/serial/$(LN_NAME);
++endif
++
++obj-$(CONFIG_BCM_BOARD) += char/board/$(BRCM_BOARD)/$(LN_NAME)/
++obj-$(CONFIG_BCM_SERIAL) += char/serial/$(LN_NAME)/
++
++
++symlinks:
++ find . -lname "*" -name "$(LN_NAME)" -print -exec rm -f "{}" ";"
++ $(CONFIG_SHELL) -c "$(LN_DRIVER_DIRS)"
+diff -urN linux-2.6.8.1/bcmdrivers/opensource/char/board/bcm963xx/bcm96348/Makefile linux-2.6.8.1-brcm63xx/bcmdrivers/opensource/char/board/bcm963xx/bcm96348/Makefile
+--- linux-2.6.8.1/bcmdrivers/opensource/char/board/bcm963xx/bcm96348/Makefile 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.8.1-brcm63xx/bcmdrivers/opensource/char/board/bcm963xx/bcm96348/Makefile 2006-06-26 09:07:10.000000000 +0200
+@@ -0,0 +1,17 @@
++# Makefile for the bcm963xx board drivers
++#
++
++
++obj-y := board.o cfiflash.o bcm63xx_flash.o bcm63xx_led.o
++
++EXTRA_CFLAGS += -I. -I$(INC_BRCMBOARDPARMS_PATH)/$(BRCM_BOARD) -I$(INC_BRCMDRIVER_PUB_PATH)/$(BRCM_BOARD)
++
++ifeq ($(strip $(WIRELESS)),1)
++ EXTRA_CFLAGS += -DWIRELESS
++endif
++
++-include $(TOPDIR)/Rules.make
++
++clean:
++ rm -f core *.o *.a *.s
++
+diff -urN linux-2.6.8.1/bcmdrivers/opensource/char/board/bcm963xx/bcm96348/bcm63xx_flash.c linux-2.6.8.1-brcm63xx/bcmdrivers/opensource/char/board/bcm963xx/bcm96348/bcm63xx_flash.c
+--- linux-2.6.8.1/bcmdrivers/opensource/char/board/bcm963xx/bcm96348/bcm63xx_flash.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.8.1-brcm63xx/bcmdrivers/opensource/char/board/bcm963xx/bcm96348/bcm63xx_flash.c 2006-06-26 09:07:10.000000000 +0200
+@@ -0,0 +1,775 @@
++/*
++<:copyright-gpl
++ Copyright 2002 Broadcom Corp. All Rights Reserved.
++
++ This program is free software; you can distribute it and/or modify it
++ under the terms of the GNU General Public License (Version 2) as
++ published by the Free Software Foundation.
++
++ This program is distributed in the hope it will be useful, but WITHOUT
++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
++ for more details.
++
++ You should have received a copy of the GNU General Public License along
++ with this program; if not, write to the Free Software Foundation, Inc.,
++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
++:>
++*/
++/*
++ ***************************************************************************
++ * File Name : bcm63xx_flash.c
++ *
++ * Description: This file contains the flash device driver APIs for bcm63xx board.
++ *
++ * Created on : 8/10/2002 seanl: use cfiflash.c, cfliflash.h (AMD specific)
++ *
++ ***************************************************************************/
++
++
++/* Includes. */
++#include <linux/fs.h>
++#include <linux/capability.h>
++#include <linux/slab.h>
++#include <linux/errno.h>
++#include <linux/module.h>
++#include <asm/uaccess.h>
++
++#include <bcm_map_part.h>
++#include <board.h>
++#define BCMTAG_EXE_USE
++#include <bcmTag.h>
++#include "cfiflash.h"
++#include "boardparms.h"
++
++//#define DEBUG_FLASH
++
++static FLASH_ADDR_INFO fInfo;
++static int flashInitialized = 0;
++
++void *retriedKmalloc(size_t size)
++{
++ void *pBuf;
++ int tryCount = 0;
++
++ // try 1000 times before quit
++ while (((pBuf = kmalloc(size, GFP_KERNEL)) == NULL) && (tryCount++ < 1000))
++ {
++ current->state = TASK_INTERRUPTIBLE;
++ schedule_timeout(HZ/10);
++ }
++ if (tryCount >= 1000)
++ pBuf = NULL;
++ else
++ memset(pBuf, 0, size);
++
++ return pBuf;
++}
++
++void retriedKfree(void *pBuf)
++{
++ kfree(pBuf);
++}
++
++/***************************************************************************
++// Function Name: getCrc32
++// Description : caculate the CRC 32 of the given data.
++// Parameters : pdata - array of data.
++// size - number of input data bytes.
++// crc - either CRC32_INIT_VALUE or previous return value.
++// Returns : crc.
++****************************************************************************/
++UINT32 getCrc32(byte *pdata, UINT32 size, UINT32 crc)
++{
++ while (size-- > 0)
++ crc = (crc >> 8) ^ Crc32_table[(crc ^ *pdata++) & 0xff];
++
++ return crc;
++}
++
++// get the nvram start addr
++//
++unsigned long get_nvram_start_addr(void)
++{
++ return ((unsigned long)
++ (flash_get_memptr(fInfo.flash_nvram_start_blk) + fInfo.flash_nvram_blk_offset));
++}
++
++// get the scratch_pad start addr
++//
++unsigned long get_scratch_pad_start_addr(void)
++{
++ return ((unsigned long)
++ (flash_get_memptr(fInfo.flash_scratch_pad_start_blk) + fInfo.flash_scratch_pad_blk_offset));
++}
++
++
++
++/* *********************************************************************
++ * kerSysImageTagGet()
++ * Get the image tag
++ * Input parameters:
++ * none
++ * Return value:
++ * point to tag -- Found
++ * NULL -- failed
++ ********************************************************************* */
++PFILE_TAG kerSysImageTagGet(void)
++{
++ int i;
++ int totalBlks = flash_get_numsectors();
++ UINT32 crc;
++ unsigned char *sectAddr;
++ PFILE_TAG pTag;
++
++#if defined(DEBUG_FLASH)
++ printk("totalblks in tagGet=%d\n", totalBlks);
++#endif
++
++ // start from 2nd blk, assume 1st one is always CFE
++ for (i = 1; i < totalBlks; i++)
++ {
++ sectAddr = flash_get_memptr((byte) i);
++ crc = CRC32_INIT_VALUE;
++ crc = getCrc32(sectAddr, (UINT32)TAG_LEN-TOKEN_LEN, crc);
++ pTag = (PFILE_TAG) sectAddr;
++
++#if defined(DEBUG_FLASH)
++ printk("Check Tag crc on blk [%d]\n", i);
++#endif
++
++ if (crc == (UINT32)(*(UINT32*)(pTag->tagValidationToken)))
++ return pTag;
++ }
++
++ return (PFILE_TAG) NULL;
++}
++
++// Initialize the flash and fill out the fInfo structure
++void kerSysFlashInit( void )
++{
++ int i = 0;
++ int totalBlks = 0;
++ int totalSize = 0;
++ int startAddr = 0;
++ int usedBlkSize = 0;
++ NVRAM_DATA nvramData;
++ UINT32 crc = CRC32_INIT_VALUE, savedCrc;
++ PFILE_TAG pTag = NULL;
++ unsigned long kernelEndAddr = 0;
++ unsigned long spAddr = 0;
++
++ if (flashInitialized)
++ return;
++
++ flashInitialized = 1;
++ flash_init();
++
++ totalBlks = flash_get_numsectors();
++ totalSize = flash_get_total_size();
++
++ printk("Total Flash size: %dK with %d sectors\n", totalSize/1024, totalBlks);
++
++ /* nvram is always at the end of flash */
++ fInfo.flash_nvram_length = FLASH45_LENGTH_NVRAM;
++ fInfo.flash_nvram_start_blk = 0; /* always the first block */
++ fInfo.flash_nvram_number_blk = 1; /*always fits in the first block */
++ fInfo.flash_nvram_blk_offset = NVRAM_DATA_OFFSET;
++
++ // check nvram CRC
++ memcpy((char *)&nvramData, (char *)get_nvram_start_addr(), sizeof(NVRAM_DATA));
++ savedCrc = nvramData.ulCheckSum;
++ nvramData.ulCheckSum = 0;
++ crc = getCrc32((char *)&nvramData, (UINT32) sizeof(NVRAM_DATA), crc);
++
++ BpSetBoardId( nvramData.szBoardId );
++
++ fInfo.flash_persistent_length = NVRAM_PSI_DEFAULT;
++ if (savedCrc != crc)
++ {
++ printk("***Board is not initialized****: Using the default PSI size: %d\n",
++ fInfo.flash_persistent_length);
++ }
++ else
++ {
++ unsigned long ulPsiSize;
++ if( BpGetPsiSize( &ulPsiSize ) == BP_SUCCESS )
++ fInfo.flash_persistent_length = ulPsiSize;
++ else
++ {
++ printk("***Board id is not set****: Using the default PSI size: %d\n",
++ fInfo.flash_persistent_length);
++ }
++ }
++
++ fInfo.flash_persistent_length *= ONEK;
++ startAddr = totalSize - fInfo.flash_persistent_length;
++ fInfo.flash_persistent_start_blk = flash_get_blk(startAddr+FLASH_BASE_ADDR_REG);
++ fInfo.flash_persistent_number_blk = totalBlks - fInfo.flash_persistent_start_blk;
++ // save abs SP address (Scratch Pad). it is before PSI
++ spAddr = startAddr - SP_MAX_LEN ;
++ // find out the offset in the start_blk
++ usedBlkSize = 0;
++ for (i = fInfo.flash_persistent_start_blk;
++ i < (fInfo.flash_persistent_start_blk + fInfo.flash_persistent_number_blk); i++)
++ {
++ usedBlkSize += flash_get_sector_size((byte) i);
++ }
++ fInfo.flash_persistent_blk_offset = usedBlkSize - fInfo.flash_persistent_length;
++
++ // get the info for sp
++ if (!(pTag = kerSysImageTagGet()))
++ {
++ printk("Failed to read image tag from flash\n");
++ return;
++ }
++ kernelEndAddr = (unsigned long) simple_strtoul(pTag->kernelAddress, NULL, 10) + \
++ (unsigned long) simple_strtoul(pTag->kernelLen, NULL, 10);
++
++ // make suer sp does not share kernel block
++ fInfo.flash_scratch_pad_start_blk = flash_get_blk(spAddr+FLASH_BASE_ADDR_REG);
++ if (fInfo.flash_scratch_pad_start_blk != flash_get_blk(kernelEndAddr))
++ {
++ fInfo.flash_scratch_pad_length = SP_MAX_LEN;
++ if (fInfo.flash_persistent_start_blk == fInfo.flash_scratch_pad_start_blk) // share blk
++ {
++#if 1 /* do not used scratch pad unless it's in its own sector */
++ printk("Scratch pad is not used for this flash part.\n");
++ fInfo.flash_scratch_pad_length = 0; // no sp
++#else /* allow scratch pad to share a sector with another section such as PSI */
++ fInfo.flash_scratch_pad_number_blk = 1;
++ fInfo.flash_scratch_pad_blk_offset = fInfo.flash_persistent_blk_offset - fInfo.flash_scratch_pad_length;
++#endif
++ }
++ else // on different blk
++ {
++ fInfo.flash_scratch_pad_number_blk = fInfo.flash_persistent_start_blk\
++ - fInfo.flash_scratch_pad_start_blk;
++ // find out the offset in the start_blk
++ usedBlkSize = 0;
++ for (i = fInfo.flash_scratch_pad_start_blk;
++ i < (fInfo.flash_scratch_pad_start_blk + fInfo.flash_scratch_pad_number_blk); i++)
++ usedBlkSize += flash_get_sector_size((byte) i);
++ fInfo.flash_scratch_pad_blk_offset = usedBlkSize - fInfo.flash_scratch_pad_length;
++ }
++ }
++ else
++ {
++ printk("No flash for scratch pad!\n");
++ fInfo.flash_scratch_pad_length = 0; // no sp
++ }
++
++#if defined(DEBUG_FLASH)
++ printk("fInfo.flash_scratch_pad_start_blk = %d\n", fInfo.flash_scratch_pad_start_blk);
++ printk("fInfo.flash_scratch_pad_number_blk = %d\n", fInfo.flash_scratch_pad_number_blk);
++ printk("fInfo.flash_scratch_pad_length = 0x%x\n", fInfo.flash_scratch_pad_length);
++ printk("fInfo.flash_scratch_pad_blk_offset = 0x%x\n", (unsigned int)fInfo.flash_scratch_pad_blk_offset);
++
++ printk("fInfo.flash_nvram_start_blk = %d\n", fInfo.flash_nvram_start_blk);
++ printk("fInfo.flash_nvram_blk_offset = 0x%x\n", (unsigned int)fInfo.flash_nvram_blk_offset);
++ printk("fInfo.flash_nvram_number_blk = %d\n", fInfo.flash_nvram_number_blk);
++
++ printk("psi startAddr = %x\n", startAddr+FLASH_BASE_ADDR_REG);
++ printk("fInfo.flash_persistent_start_blk = %d\n", fInfo.flash_persistent_start_blk);
++ printk("fInfo.flash_persistent_blk_offset = 0x%x\n", (unsigned int)fInfo.flash_persistent_blk_offset);
++ printk("fInfo.flash_persistent_number_blk = %d\n", fInfo.flash_persistent_number_blk);
++#endif
++
++}
++
++
++
++/***********************************************************************
++ * Function Name: kerSysFlashAddrInfoGet
++ * Description : Fills in a structure with information about the NVRAM
++ * and persistent storage sections of flash memory.
++ * Fro physmap.c to mount the fs vol.
++ * Returns : None.
++ ***********************************************************************/
++void kerSysFlashAddrInfoGet(PFLASH_ADDR_INFO pflash_addr_info)
++{
++ pflash_addr_info->flash_nvram_blk_offset = fInfo.flash_nvram_blk_offset;
++ pflash_addr_info->flash_nvram_length = fInfo.flash_nvram_length;
++ pflash_addr_info->flash_nvram_number_blk = fInfo.flash_nvram_number_blk;
++ pflash_addr_info->flash_nvram_start_blk = fInfo.flash_nvram_start_blk;
++ pflash_addr_info->flash_persistent_blk_offset = fInfo.flash_persistent_blk_offset;
++ pflash_addr_info->flash_persistent_length = fInfo.flash_persistent_length;
++ pflash_addr_info->flash_persistent_number_blk = fInfo.flash_persistent_number_blk;
++ pflash_addr_info->flash_persistent_start_blk = fInfo.flash_persistent_start_blk;
++}
++
++
++// get shared blks into *** pTempBuf *** which has to be released bye the caller!
++// return: if pTempBuf != NULL, poits to the data with the dataSize of the buffer
++// !NULL -- ok
++// NULL -- fail
++static char *getSharedBlks(int start_blk, int end_blk)
++{
++ int i = 0;
++ int usedBlkSize = 0;
++ int sect_size = 0;
++ char *pTempBuf = NULL;
++ char *pBuf = NULL;
++
++ for (i = start_blk; i < end_blk; i++)
++ usedBlkSize += flash_get_sector_size((byte) i);
++
++#if defined(DEBUG_FLASH)
++ printk("usedBlkSize = %d\n", usedBlkSize);
++#endif
++
++ if ((pTempBuf = (char *) retriedKmalloc(usedBlkSize)) == NULL)
++ {
++ printk("failed to allocate memory with size: %d\n", usedBlkSize);
++ return pTempBuf;
++ }
++
++ pBuf = pTempBuf;
++ for (i = start_blk; i < end_blk; i++)
++ {
++ sect_size = flash_get_sector_size((byte) i);
++
++#if defined(DEBUG_FLASH)
++ printk("i = %d, sect_size = %d, end_blk = %d\n", i, sect_size, end_blk);
++#endif
++ flash_read_buf((byte)i, 0, pBuf, sect_size);
++ pBuf += sect_size;
++ }
++
++ return pTempBuf;
++}
++
++
++
++// Set the pTempBuf to flash from start_blk to end_blk
++// return:
++// 0 -- ok
++// -1 -- fail
++static int setSharedBlks(int start_blk, int end_blk, char *pTempBuf)
++{
++ int i = 0;
++ int sect_size = 0;
++ int sts = 0;
++ char *pBuf = pTempBuf;
++
++ for (i = start_blk; i < end_blk; i++)
++ {
++ sect_size = flash_get_sector_size((byte) i);
++ flash_sector_erase_int(i);
++ if (flash_write_buf(i, 0, pBuf, sect_size) != sect_size)
++ {
++ printk("Error writing flash sector %d.", i);
++ sts = -1;
++ break;
++ }
++ pBuf += sect_size;
++ }
++
++ return sts;
++}
++
++
++
++/*******************************************************************************
++ * NVRAM functions
++ *******************************************************************************/
++
++// get nvram data
++// return:
++// 0 - ok
++// -1 - fail
++int kerSysNvRamGet(char *string, int strLen, int offset)
++{
++ char *pBuf = NULL;
++
++ if (!flashInitialized)
++ kerSysFlashInit();
++
++ if (strLen > FLASH45_LENGTH_NVRAM)
++ return -1;
++
++ if ((pBuf = getSharedBlks(fInfo.flash_nvram_start_blk,
++ (fInfo.flash_nvram_start_blk + fInfo.flash_nvram_number_blk))) == NULL)
++ return -1;
++
++ // get string off the memory buffer
++ memcpy(string, (pBuf + fInfo.flash_nvram_blk_offset + offset), strLen);
++
++ retriedKfree(pBuf);
++
++ return 0;
++}
++
++
++// set nvram
++// return:
++// 0 - ok
++// -1 - fail
++int kerSysNvRamSet(char *string, int strLen, int offset)
++{
++ int sts = 0;
++ char *pBuf = NULL;
++
++ if (strLen > FLASH45_LENGTH_NVRAM)
++ return -1;
++
++ if ((pBuf = getSharedBlks(fInfo.flash_nvram_start_blk,
++ (fInfo.flash_nvram_start_blk + fInfo.flash_nvram_number_blk))) == NULL)
++ return -1;
++
++ // set string to the memory buffer
++ memcpy((pBuf + fInfo.flash_nvram_blk_offset + offset), string, strLen);
++
++ if (setSharedBlks(fInfo.flash_nvram_start_blk,
++ (fInfo.flash_nvram_number_blk + fInfo.flash_nvram_start_blk), pBuf) != 0)
++ sts = -1;
++
++ retriedKfree(pBuf);
++
++ return sts;
++}
++
++
++/***********************************************************************
++ * Function Name: kerSysEraseNvRam
++ * Description : Erase the NVRAM storage section of flash memory.
++ * Returns : 1 -- ok, 0 -- fail
++ ***********************************************************************/
++int kerSysEraseNvRam(void)
++{
++ int sts = 1;
++ char *tempStorage = retriedKmalloc(FLASH45_LENGTH_NVRAM);
++
++ // just write the whole buf with '0xff' to the flash
++ if (!tempStorage)
++ sts = 0;
++ else
++ {
++ memset(tempStorage, 0xff, FLASH45_LENGTH_NVRAM);
++ if (kerSysNvRamSet(tempStorage, FLASH45_LENGTH_NVRAM, 0) != 0)
++ sts = 0;
++ retriedKfree(tempStorage);
++ }
++
++ return sts;
++}
++
++
++/*******************************************************************************
++ * PSI functions
++ *******************************************************************************/
++// get psi data
++// return:
++// 0 - ok
++// -1 - fail
++int kerSysPersistentGet(char *string, int strLen, int offset)
++{
++ char *pBuf = NULL;
++
++ if (strLen > fInfo.flash_persistent_length)
++ return -1;
++
++ if ((pBuf = getSharedBlks(fInfo.flash_persistent_start_blk,
++ (fInfo.flash_persistent_start_blk + fInfo.flash_persistent_number_blk))) == NULL)
++ return -1;
++
++ // get string off the memory buffer
++ memcpy(string, (pBuf + fInfo.flash_persistent_blk_offset + offset), strLen);
++
++ retriedKfree(pBuf);
++
++ return 0;
++}
++
++
++// set psi
++// return:
++// 0 - ok
++// -1 - fail
++int kerSysPersistentSet(char *string, int strLen, int offset)
++{
++ int sts = 0;
++ char *pBuf = NULL;
++
++ if (strLen > fInfo.flash_persistent_length)
++ return -1;
++
++ if ((pBuf = getSharedBlks(fInfo.flash_persistent_start_blk,
++ (fInfo.flash_persistent_start_blk + fInfo.flash_persistent_number_blk))) == NULL)
++ return -1;
++
++ // set string to the memory buffer
++ memcpy((pBuf + fInfo.flash_persistent_blk_offset + offset), string, strLen);
++
++ if (setSharedBlks(fInfo.flash_persistent_start_blk,
++ (fInfo.flash_persistent_number_blk + fInfo.flash_persistent_start_blk), pBuf) != 0)
++ sts = -1;
++
++ retriedKfree(pBuf);
++
++ return sts;
++}
++
++
++// flash bcm image
++// return:
++// 0 - ok
++// !0 - the sector number fail to be flashed (should not be 0)
++int kerSysBcmImageSet( int flash_start_addr, char *string, int size)
++{
++ int sts;
++ int sect_size;
++ int blk_start;
++ int i;
++ char *pTempBuf = NULL;
++ int whole_image = 0;
++
++ blk_start = flash_get_blk(flash_start_addr);
++ if( blk_start < 0 )
++ return( -1 );
++
++ if (flash_start_addr == FLASH_BASE && size > FLASH45_LENGTH_BOOT_ROM)
++ whole_image = 1;
++
++ /* write image to flash memory */
++ do
++ {
++ sect_size = flash_get_sector_size(blk_start);
++// NOTE: for memory problem in multiple PVC configuration, temporary get rid of kmalloc this 64K for now.
++// if ((pTempBuf = (char *)retriedKmalloc(sect_size)) == NULL)
++// {
++// printk("Failed to allocate memory with size: %d. Reset the router...\n", sect_size);
++// kerSysMipsSoftReset(); // reset the board right away.
++// }
++ // for whole image, no check on psi
++ if (!whole_image && blk_start == fInfo.flash_persistent_start_blk) // share the blk with psi
++ {
++ if (size > (sect_size - fInfo.flash_persistent_length))
++ {
++ printk("Image is too big\n");
++ break; // image is too big. Can not overwrite to nvram
++ }
++ if ((pTempBuf = (char *)retriedKmalloc(sect_size)) == NULL)
++ {
++ printk("Failed to allocate memory with size: %d. Reset the router...\n", sect_size);
++ kerSysMipsSoftReset(); // reset the board right away.
++ }
++ flash_read_buf((byte)blk_start, 0, pTempBuf, sect_size);
++ if (copy_from_user((void *)pTempBuf,(void *)string, size) != 0)
++ break; // failed ?
++ flash_sector_erase_int(blk_start); // erase blk before flash
++ if (flash_write_buf(blk_start, 0, pTempBuf, sect_size) == sect_size)
++ size = 0; // break out and say all is ok
++ retriedKfree(pTempBuf);
++ break;
++ }
++
++ flash_sector_erase_int(blk_start); // erase blk before flash
++
++ if (sect_size > size)
++ {
++ if (size & 1)
++ size++;
++ sect_size = size;
++ }
++
++ if ((i = flash_write_buf(blk_start, 0, string, sect_size)) != sect_size) {
++ break;
++ }
++ blk_start++;
++ string += sect_size;
++ size -= sect_size;
++ } while (size > 0);
++
++ if (whole_image)
++ {
++ // If flashing a whole image, erase to end of flash.
++ int total_blks = flash_get_numsectors();
++ while( blk_start < total_blks )
++ {
++ flash_sector_erase_int(blk_start);
++ blk_start++;
++ }
++ }
++ if (pTempBuf)
++ retriedKfree(pTempBuf);
++
++ if( size == 0 )
++ sts = 0; // ok
++ else
++ sts = blk_start; // failed to flash this sector
++
++ return sts;
++}
++
++/*******************************************************************************
++ * SP functions
++ *******************************************************************************/
++// get sp data. NOTE: memcpy work here -- not using copy_from/to_user
++// return:
++// 0 - ok
++// -1 - fail
++int kerSysScratchPadGet(char *tokenId, char *tokBuf, int bufLen)
++{
++ PSP_HEADER pHead = NULL;
++ PSP_TOKEN pToken = NULL;
++ char *pBuf = NULL;
++ char *pShareBuf = NULL;
++ char *startPtr = NULL;
++ char *endPtr = NULL;
++ char *spEndPtr = NULL;
++ int sts = -1;
++
++ if (fInfo.flash_scratch_pad_length == 0)
++ return sts;
++
++ if (bufLen >= (fInfo.flash_scratch_pad_length - sizeof(SP_HEADER) - sizeof(SP_TOKEN)))
++ {
++ printk("Exceed scratch pad space by %d\n", bufLen - fInfo.flash_scratch_pad_length \
++ - sizeof(SP_HEADER) - sizeof(SP_TOKEN));
++ return sts;
++ }
++
++ if ((pShareBuf = getSharedBlks(fInfo.flash_scratch_pad_start_blk,
++ (fInfo.flash_scratch_pad_start_blk + fInfo.flash_scratch_pad_number_blk))) == NULL)
++ return sts;
++
++ // pBuf points to SP buf
++ pBuf = pShareBuf + fInfo.flash_scratch_pad_blk_offset;
++
++ pHead = (PSP_HEADER) pBuf;
++ if (memcmp(pHead->SPMagicNum, MAGIC_NUMBER, MAGIC_NUM_LEN) != 0)
++ {
++ printk("Scrap pad is not initialized.\n");
++ return sts;
++ }
++
++ // search up to SPUsedLen for the token
++ startPtr = pBuf + sizeof(SP_HEADER);
++ endPtr = pBuf + pHead->SPUsedLen;
++ spEndPtr = pBuf + SP_MAX_LEN;
++ while (startPtr < endPtr && startPtr < spEndPtr)
++ {
++ pToken = (PSP_TOKEN) startPtr;
++ if (strncmp(pToken->tokenName, tokenId, TOKEN_NAME_LEN) == 0)
++ {
++ memcpy(tokBuf, startPtr + sizeof(SP_TOKEN), bufLen);
++ sts = 0;
++ break;
++ }
++ // get next token
++ startPtr += sizeof(SP_TOKEN) + pToken->tokenLen;
++ }
++
++ retriedKfree(pShareBuf);
++
++ return sts;
++}
++
++
++// set sp. NOTE: memcpy work here -- not using copy_from/to_user
++// return:
++// 0 - ok
++// -1 - fail
++int kerSysScratchPadSet(char *tokenId, char *tokBuf, int bufLen)
++{
++ PSP_TOKEN pToken = NULL;
++ PSP_HEADER pHead = NULL;
++ char *pShareBuf = NULL;
++ char *pBuf = NULL;
++ SP_HEADER SPHead;
++ SP_TOKEN SPToken;
++ char *curPtr;
++ int sts = -1;
++
++ if (fInfo.flash_scratch_pad_length == 0)
++ return sts;
++
++ if (bufLen >= (fInfo.flash_scratch_pad_length - sizeof(SP_HEADER) - sizeof(SP_TOKEN)))
++ {
++ printk("Exceed scratch pad space by %d\n", bufLen - fInfo.flash_scratch_pad_length \
++ - sizeof(SP_HEADER) - sizeof(SP_TOKEN));
++ return sts;
++ }
++
++ if ((pShareBuf = getSharedBlks(fInfo.flash_scratch_pad_start_blk,
++ (fInfo.flash_scratch_pad_start_blk + fInfo.flash_scratch_pad_number_blk))) == NULL)
++ return sts;
++
++ // pBuf points to SP buf
++ pBuf = pShareBuf + fInfo.flash_scratch_pad_blk_offset;
++ pHead = (PSP_HEADER) pBuf;
++
++ // form header info. SPUsedLen later on...
++ memset((char *)&SPHead, 0, sizeof(SP_HEADER));
++ memcpy(SPHead.SPMagicNum, MAGIC_NUMBER, MAGIC_NUM_LEN);
++ SPHead.SPVersion = SP_VERSION;
++
++ // form token info.
++ memset((char*)&SPToken, 0, sizeof(SP_TOKEN));
++ strncpy(SPToken.tokenName, tokenId, TOKEN_NAME_LEN - 1);
++ SPToken.tokenLen = bufLen;
++ if (memcmp(pHead->SPMagicNum, MAGIC_NUMBER, MAGIC_NUM_LEN) != 0)
++ {
++ // new sp, so just flash the token
++ printk("No Scrap pad found. Initialize scratch pad...\n");
++ SPHead.SPUsedLen = sizeof(SP_HEADER) + sizeof(SP_TOKEN) + bufLen;
++ memcpy(pBuf, (char *)&SPHead, sizeof(SP_HEADER));
++ curPtr = pBuf + sizeof(SP_HEADER);
++ memcpy(curPtr, (char *)&SPToken, sizeof(SP_TOKEN));
++ curPtr += sizeof(SP_TOKEN);
++ memcpy(curPtr, tokBuf, bufLen);
++ }
++ else
++ {
++ // need search for the token, if exist with same size overwrite it. if sizes differ,
++ // move over the later token data over and put the new one at the end
++ char *endPtr = pBuf + pHead->SPUsedLen;
++ char *spEndPtr = pBuf + SP_MAX_LEN;
++ curPtr = pBuf + sizeof(SP_HEADER);
++ while (curPtr < endPtr && curPtr < spEndPtr)
++ {
++ pToken = (PSP_TOKEN) curPtr;
++ if (strncmp(pToken->tokenName, tokenId, TOKEN_NAME_LEN) == 0)
++ {
++ if (pToken->tokenLen == bufLen) // overwirte it
++ {
++ memcpy((curPtr+sizeof(SP_TOKEN)), tokBuf, bufLen);
++ break;
++ }
++ else // move later data over and put the new token at the end
++ {
++ memcpy((curPtr+sizeof(SP_TOKEN)), tokBuf, bufLen); // ~~~
++ break;
++ }
++ }
++ else // not same token ~~~
++ {
++ }
++ // get next token
++ curPtr += sizeof(SP_TOKEN) + pToken->tokenLen;
++ } // end while
++ SPHead.SPUsedLen = sizeof(SP_HEADER) + sizeof(SP_TOKEN) + bufLen; // ~~~
++ if (SPHead.SPUsedLen > SP_MAX_LEN)
++ {
++ printk("No more Scratch pad space left! Over limit by %d bytes\n", SPHead.SPUsedLen - SP_MAX_LEN);
++ return sts;
++ }
++
++ } // else if not new sp
++
++ sts = setSharedBlks(fInfo.flash_scratch_pad_start_blk,
++ (fInfo.flash_scratch_pad_number_blk + fInfo.flash_scratch_pad_start_blk), pShareBuf);
++
++ retriedKfree(pShareBuf);
++
++ return sts;
++
++
++}
++
++int kerSysFlashSizeGet(void)
++{
++ return flash_get_total_size();
++}
++
+diff -urN linux-2.6.8.1/bcmdrivers/opensource/char/board/bcm963xx/bcm96348/bcm63xx_led.c linux-2.6.8.1-brcm63xx/bcmdrivers/opensource/char/board/bcm963xx/bcm96348/bcm63xx_led.c
+--- linux-2.6.8.1/bcmdrivers/opensource/char/board/bcm963xx/bcm96348/bcm63xx_led.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.8.1-brcm63xx/bcmdrivers/opensource/char/board/bcm963xx/bcm96348/bcm63xx_led.c 2006-06-26 09:07:10.000000000 +0200
+@@ -0,0 +1,582 @@
++/*
++<:copyright-gpl
++ Copyright 2002 Broadcom Corp. All Rights Reserved.
++
++ This program is free software; you can distribute it and/or modify it
++ under the terms of the GNU General Public License (Version 2) as
++ published by the Free Software Foundation.
++
++ This program is distributed in the hope it will be useful, but WITHOUT
++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
++ for more details.
++
++ You should have received a copy of the GNU General Public License along
++ with this program; if not, write to the Free Software Foundation, Inc.,
++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
++:>
++*/
++/***************************************************************************
++ * File Name : bcm63xx_led.c
++ *
++ * Description:
++ *
++ * This file contains bcm963xx board led control API functions.
++ *
++ * To use it, do the following
++ *
++ * 1). define in the board.c the following led mappping (this is for 6345GW board):
++ * const LED_MAP_PAIR cLedMapping45GW[] =
++ * { // led name Initial state physical pin (ledMask)
++ * {kLedUsb, kLedStateOff, GPIO_LED_PIN_7},
++ * {kLedAdsl, kLedStateOff, GPIO_LED_PIN_8},
++ * {kLedPPP, kLedStateOff, GPIO_LED_PIN_9}, // PPP and WanData share PIN_9
++ * {kLedWanData, kLedStateOff, GPIO_LED_PIN_9},
++ * {kLedWireless, kLedStateOff, GPIO_LED_PIN_10},
++ * {kLedEnd, kLedStateOff, 0 } // NOTE: kLedEnd has to be at the end.
++ *
++ * 2). };To initialize led API and initial state of the leds, call the following function with the mapping
++ * pointer from the above struct
++ *
++ * boardLedInit((PLED_MAP_PAIR) &cLedMapping45R);
++ *
++ * 3). Sample call for kernel mode:
++ *
++ * kerSysLedCtrl(kLedAdsl, kLedStateBlinkOnce); // kLedxxx defines in board.h
++ *
++ * 4). Sample call for user mode
++ *
++ * sysLedCtrl(kLedAdsl, kLedStateBlinkOnce); // kLedxxx defines in board_api.h
++ *
++ *
++ * Created on : 10/28/2002 seanl
++ *
++ ***************************************************************************/
++
++/* Includes. */
++#include <linux/init.h>
++#include <linux/fs.h>
++#include <linux/capability.h>
++#include <linux/slab.h>
++#include <linux/errno.h>
++#include <linux/module.h>
++#include <linux/netdevice.h>
++#include <asm/uaccess.h>
++
++#include <bcm_map_part.h>
++#include <board.h>
++
++#define k100ms (HZ / 10) // ~100 ms
++#define kFastBlinkCount 0 // ~100ms
++#define kSlowBlinkCount 5 // ~600ms
++
++#define MAX_VIRT_LEDS 12
++
++// uncomment // for debug led
++//#define DEBUG_LED
++
++// global variables:
++struct timer_list gLedTimer;
++int gTimerOn = FALSE;
++int gLedCount = 0;
++
++typedef struct ledinfo
++{
++ unsigned short ledMask; // mask for led: ie. giop 10 = 0x0400
++ unsigned short ledActiveLow; // GPIO bit reset to turn on LED
++ unsigned short ledMaskFail; // mask for led: ie. giop 10 = 0x0400
++ unsigned short ledActiveLowFail;// GPIO bit reset to turn on LED
++ BOARD_LED_STATE ledState; // current led state
++ BOARD_LED_STATE savedLedState; // used in blink once for restore to the orignal ledState
++ int blinkCountDown; // if == 0, do blink (toggle). Is assgined value and dec by 1 at each timer.
++} LED_INFO, *PLED_INFO;
++
++static PLED_INFO gLed = NULL;
++static PLED_INFO gpVirtLeds[MAX_VIRT_LEDS];
++static HANDLE_LED_FUNC gLedHwFunc[MAX_VIRT_LEDS];
++static HANDLE_LED_FUNC gLedHwFailFunc[MAX_VIRT_LEDS];
++
++#if 0 /* BROKEN */
++#if defined(CONFIG_BCM96348) || defined(CONFIG_BCM96338)
++static int gLedOffInBridgeMode = 1;
++#elif defined(CONFIG_BCM96345)
++static int gLedOffInBridgeMode = 0;
++#endif
++#endif
++
++void ledTimerExpire(void);
++int initLedInfo( PLED_MAP_PAIR pCurMap, PLED_INFO pCurLed );
++
++//**************************************************************************************
++// LED operations
++//**************************************************************************************
++
++// turn led on and set the ledState
++void ledOn(PLED_INFO pLed)
++{
++ if( pLed->ledMask )
++ {
++ GPIO->GPIODir |= pLed->ledMask; // turn on the direction bit in case was turned off by some one
++ if( pLed->ledActiveLow )
++ GPIO->GPIOio &= ~pLed->ledMask; // turn on the led
++ else
++ GPIO->GPIOio |= pLed->ledMask; // turn on the led
++ pLed->ledState = pLed->savedLedState = kLedStateOn;
++ }
++}
++
++
++// turn led off and set the ledState
++void ledOff(PLED_INFO pLed)
++{
++ if( pLed->ledMask )
++ {
++ GPIO->GPIODir |= pLed->ledMask; // turn on the direction bit in case was turned off by some one
++ if( pLed->ledActiveLow )
++ GPIO->GPIOio |= pLed->ledMask; // turn off the led
++ else
++ GPIO->GPIOio &= ~pLed->ledMask; // turn off the led
++ pLed->ledState = pLed->savedLedState = kLedStateOff;
++ }
++}
++
++// turn led on and set the ledState
++void ledOnFail(PLED_INFO pLed)
++{
++ if( pLed->ledMaskFail )
++ {
++ GPIO->GPIODir |= pLed->ledMaskFail; // turn on the direction bit in case was turned off by some one
++ if( pLed->ledActiveLowFail )
++ GPIO->GPIOio &= ~pLed->ledMaskFail;// turn on the led
++ else
++ GPIO->GPIOio |= pLed->ledMaskFail; // turn on the led
++ pLed->ledState = pLed->savedLedState = kLedStateFail;
++ }
++}
++
++
++// turn led off and set the ledState
++void ledOffFail(PLED_INFO pLed)
++{
++ if( pLed->ledMaskFail )
++ {
++ GPIO->GPIODir |= pLed->ledMaskFail; // turn on the direction bit in case was turned off by some one
++ if( pLed->ledActiveLowFail )
++ GPIO->GPIOio |= pLed->ledMaskFail; // turn off the led
++ else
++ GPIO->GPIOio &= ~pLed->ledMaskFail;// turn off the led
++ pLed->ledState = pLed->savedLedState = kLedStateOff;
++ }
++}
++
++
++// toggle the led and return the current ledState
++BOARD_LED_STATE ledToggle(PLED_INFO pLed)
++{
++ GPIO->GPIODir |= pLed->ledMask; // turn on the direction bit in case was turned off by some one
++ if (GPIO->GPIOio & pLed->ledMask)
++ {
++ GPIO->GPIOio &= ~(pLed->ledMask);
++ return( (pLed->ledActiveLow) ? kLedStateOn : kLedStateOff );
++ }
++ else
++ {
++ GPIO->GPIOio |= pLed->ledMask;
++ return( (pLed->ledActiveLow) ? kLedStateOff : kLedStateOn );
++ }
++}
++
++
++// led timer. Will return if timer is already on
++void ledTimerStart(void)
++{
++ if (gTimerOn)
++ return;
++
++#if defined(DEBUG_LED)
++ printk("led: add_timer\n");
++#endif
++
++ init_timer(&gLedTimer);
++ gLedTimer.function = (void*)ledTimerExpire;
++ gLedTimer.expires = jiffies + k100ms; // timer expires in ~100ms
++ add_timer (&gLedTimer);
++ gTimerOn = TRUE;
++}
++
++
++// led timer expire kicks in about ~100ms and perform the led operation according to the ledState and
++// restart the timer according to ledState
++void ledTimerExpire(void)
++{
++ int i;
++ PLED_INFO pCurLed;
++
++ gTimerOn = FALSE;
++
++ for (i = 0, pCurLed = gLed; i < gLedCount; i++, pCurLed++)
++ {
++#if defined(DEBUG_LED)
++ printk("led[%d]: Mask=0x%04x, State = %d, blcd=%d\n", i, pCurLed->ledMask, pCurLed->ledState, pCurLed->blinkCountDown);
++#endif
++ switch (pCurLed->ledState)
++ {
++ case kLedStateOn:
++ case kLedStateOff:
++ case kLedStateFail:
++ pCurLed->blinkCountDown = 0; // reset the blink count down
++ break;
++
++ case kLedStateBlinkOnce:
++ ledToggle(pCurLed);
++ pCurLed->blinkCountDown = 0; // reset to 0
++ pCurLed->ledState = pCurLed->savedLedState;
++ if (pCurLed->ledState == kLedStateSlowBlinkContinues ||
++ pCurLed->ledState == kLedStateFastBlinkContinues)
++ ledTimerStart(); // start timer if in blinkContinues stats
++ break;
++
++ case kLedStateSlowBlinkContinues:
++ if (pCurLed->blinkCountDown-- == 0)
++ {
++ pCurLed->blinkCountDown = kSlowBlinkCount;
++ ledToggle(pCurLed);
++ }
++ ledTimerStart();
++ break;
++
++ case kLedStateFastBlinkContinues:
++ if (pCurLed->blinkCountDown-- == 0)
++ {
++ pCurLed->blinkCountDown = kFastBlinkCount;
++ ledToggle(pCurLed);
++ }
++ ledTimerStart();
++ break;
++
++ default:
++ printk("Invalid state = %d\n", pCurLed->ledState);
++ }
++ }
++}
++
++// initialize the gLedCount and allocate and fill gLed struct
++void __init boardLedInit(PLED_MAP_PAIR cLedMapping)
++{
++ PLED_MAP_PAIR p1, p2;
++ PLED_INFO pCurLed;
++ int needTimer = FALSE;
++ int alreadyUsed = 0;
++
++#if defined(CONFIG_BCM96348) || defined(CONFIG_BCM96338)
++ /* Set blink rate for BCM6348/BCM6338 hardware LEDs. */
++ GPIO->LEDCtrl &= ~LED_INTERVAL_SET_MASK;
++ GPIO->LEDCtrl |= LED_INTERVAL_SET_80MS;
++#endif
++
++ memset( gpVirtLeds, 0x00, sizeof(gpVirtLeds) );
++ memset( gLedHwFunc, 0x00, sizeof(gLedHwFunc) );
++ memset( gLedHwFailFunc, 0x00, sizeof(gLedHwFailFunc) );
++
++ gLedCount = 0;
++
++ // Check for multiple LED names and multiple LED GPIO pins that share the
++ // same physical board LED.
++ for( p1 = cLedMapping; p1->ledName != kLedEnd; p1++ )
++ {
++ alreadyUsed = 0;
++ for( p2 = cLedMapping; p2 != p1; p2++ )
++ {
++ if( (p1->ledMask && p1->ledMask == p2->ledMask) ||
++ (p1->ledMaskFail && p1->ledMaskFail == p2->ledMaskFail) )
++ {
++ alreadyUsed = 1;
++ break;
++ }
++ }
++
++ if( alreadyUsed == 0 )
++ gLedCount++;
++ }
++
++ gLed = (PLED_INFO) kmalloc((gLedCount * sizeof(LED_INFO)), GFP_KERNEL);
++ if( gLed == NULL )
++ {
++ printk( "LED memory allocation error.\n" );
++ return;
++ }
++
++ memset( gLed, 0x00, gLedCount * sizeof(LED_INFO) );
++
++ // initial the gLed with unique ledMask and initial state. If more than 1 ledNames share the physical led
++ // (ledMask) the first defined led's ledInitState will be used.
++ pCurLed = gLed;
++ for( p1 = cLedMapping; p1->ledName != kLedEnd; p1++ )
++ {
++ if( (int) p1->ledName > MAX_VIRT_LEDS )
++ continue;
++
++ alreadyUsed = 0;
++ for( p2 = cLedMapping; p2 != p1; p2++ )
++ {
++ if( (p1->ledMask && p1->ledMask == p2->ledMask) ||
++ (p1->ledMaskFail && p1->ledMaskFail == p2->ledMaskFail) )
++ {
++ alreadyUsed = 1;
++ break;
++ }
++ }
++
++ if( alreadyUsed == 0 )
++ {
++ // Initialize the board LED for the first time.
++ needTimer = initLedInfo( p1, pCurLed );
++ gpVirtLeds[(int) p1->ledName] = pCurLed;
++ pCurLed++;
++ }
++ else
++ {
++ PLED_INFO pLed;
++ for( pLed = gLed; pLed != pCurLed; pLed++ )
++ {
++ // Find the LED_INFO structure that has already been initialized.
++ if((pLed->ledMask && pLed->ledMask == p1->ledMask) ||
++ (pLed->ledMaskFail && pLed->ledMaskFail==p1->ledMaskFail))
++ {
++ // The board LED has already been initialized but possibly
++ // not completely initialized.
++ if( p1->ledMask )
++ {
++ pLed->ledMask = p1->ledMask;
++ pLed->ledActiveLow = p1->ledActiveLow;
++ }
++ if( p1->ledMaskFail )
++ {
++ pLed->ledMaskFail = p1->ledMaskFail;
++ pLed->ledActiveLowFail = p1->ledActiveLowFail;
++ }
++ gpVirtLeds[(int) p1->ledName] = pLed;
++ break;
++ }
++ }
++ }
++ }
++
++ if (needTimer)
++ ledTimerStart();
++
++#if defined(DEBUG_LED)
++ int i;
++ for (i=0; i < gLedCount; i++)
++ printk("initLed: led[%d]: mask=0x%04x, state=%d\n", i,(gLed+i)->ledMask, (gLed+i)->ledState);
++#endif
++
++}
++
++// Initialize a structure that contains information about a physical board LED
++// control. The board LED may contain more than one GPIO pin to control a
++// normal condition (green) or a failure condition (red).
++int initLedInfo( PLED_MAP_PAIR pCurMap, PLED_INFO pCurLed )
++{
++ int needTimer = FALSE;
++ pCurLed->ledState = pCurLed->savedLedState = pCurMap->ledInitState;
++ pCurLed->ledMask = pCurMap->ledMask;
++ pCurLed->ledActiveLow = pCurMap->ledActiveLow;
++ pCurLed->ledMaskFail = pCurMap->ledMaskFail;
++ pCurLed->ledActiveLowFail = pCurMap->ledActiveLowFail;
++
++ switch (pCurLed->ledState)
++ {
++ case kLedStateOn:
++ pCurLed->blinkCountDown = 0; // reset the blink count down
++ ledOn(pCurLed);
++ break;
++ case kLedStateOff:
++ pCurLed->blinkCountDown = 0; // reset the blink count down
++ ledOff(pCurLed);
++ break;
++ case kLedStateFail:
++ pCurLed->blinkCountDown = 0; // reset the blink count down
++ ledOnFail(pCurLed);
++ break;
++ case kLedStateBlinkOnce:
++ pCurLed->blinkCountDown = 1;
++ needTimer = TRUE;
++ break;
++ case kLedStateSlowBlinkContinues:
++ pCurLed->blinkCountDown = kSlowBlinkCount;
++ needTimer = TRUE;
++ break;
++ case kLedStateFastBlinkContinues:
++ pCurLed->blinkCountDown = kFastBlinkCount;
++ needTimer = TRUE;
++ break;
++ default:
++ printk("Invalid state = %d\n", pCurLed->ledState);
++ }
++
++ return( needTimer );
++}
++
++#if 0 /* BROKEN */
++// Determines if there is at least one interface in bridge mode. Bridge mode
++// is determined by the cfm convention of naming bridge interfaces nas17
++// through nas24.
++static int isBridgedProtocol(void)
++{
++ extern int dev_get(const char *name);
++ const int firstBridgeId = 17;
++ const int lastBridgeId = 24;
++ int i;
++ int ret = FALSE;
++ char name[16];
++
++ for( i = firstBridgeId; i <= lastBridgeId; i++ )
++ {
++ sprintf( name, "nas%d", i );
++
++ if( dev_get(name) )
++ {
++ ret = TRUE;
++ break;
++ }
++ }
++
++ return(ret);
++}
++#endif
++
++// led ctrl. Maps the ledName to the corresponding ledInfoPtr and perform the led operation
++void boardLedCtrl(BOARD_LED_NAME ledName, BOARD_LED_STATE ledState)
++{
++ PLED_INFO ledInfoPtr;
++
++ // do the mapping from virtual to physical led
++ if( (int) ledName < MAX_VIRT_LEDS )
++ ledInfoPtr = gpVirtLeds[(int) ledName];
++ else
++ ledInfoPtr = NULL;
++
++ if (ledInfoPtr == NULL)
++ return;
++
++ if( ledState != kLedStateFail && gLedHwFunc[(int) ledName] )
++ {
++ (*gLedHwFunc[(int) ledName]) (ledName, ledState);
++ ledOffFail(ledInfoPtr);
++ return;
++ }
++ else
++ if( ledState == kLedStateFail && gLedHwFailFunc[(int) ledName] )
++ {
++ (*gLedHwFailFunc[(int) ledName]) (ledName, ledState);
++ ledOff(ledInfoPtr);
++ return;
++ }
++
++#if 0 /* BROKEN */
++ // Do not blink the WAN Data LED if at least one interface is in bridge mode.
++ if(gLedOffInBridgeMode == 1 && (ledName == kLedWanData || ledName == kLedPPP))
++ {
++ static int BridgedProtocol = -1;
++
++ if( BridgedProtocol == -1 )
++ BridgedProtocol = isBridgedProtocol();
++
++ if( BridgedProtocol == TRUE )
++ return;
++ }
++#endif
++
++ // If the state is kLedStateFail and there is not a failure LED defined
++ // in the board parameters, change the state to kLedStateFastBlinkContinues.
++ if( ledState == kLedStateFail && ledInfoPtr->ledMaskFail == 0 )
++ ledState = kLedStateFastBlinkContinues;
++
++ switch (ledState)
++ {
++ case kLedStateOn:
++ // First, turn off the complimentary (failure) LED GPIO.
++ if( ledInfoPtr->ledMaskFail )
++ ledOffFail(ledInfoPtr);
++ else
++ if( gLedHwFailFunc[(int) ledName] )
++ (*gLedHwFailFunc[(int) ledName]) (ledName, kLedStateOff);
++
++ // Next, turn on the specified LED GPIO.
++ ledOn(ledInfoPtr);
++ break;
++
++ case kLedStateOff:
++ // First, turn off the complimentary (failure) LED GPIO.
++ if( ledInfoPtr->ledMaskFail )
++ ledOffFail(ledInfoPtr);
++ else
++ if( gLedHwFailFunc[(int) ledName] )
++ (*gLedHwFailFunc[(int) ledName]) (ledName, kLedStateOff);
++
++ // Next, turn off the specified LED GPIO.
++ ledOff(ledInfoPtr);
++ break;
++
++ case kLedStateFail:
++ // First, turn off the complimentary (normal) LED GPIO.
++ if( ledInfoPtr->ledMask )
++ ledOff(ledInfoPtr);
++ else
++ if( gLedHwFunc[(int) ledName] )
++ (*gLedHwFunc[(int) ledName]) (ledName, kLedStateOff);
++
++ // Next, turn on (red) the specified LED GPIO.
++ ledOnFail(ledInfoPtr);
++ break;
++
++ case kLedStateBlinkOnce:
++ // skip blinkOnce if it is already in Slow/Fast blink continues state
++ if (ledInfoPtr->savedLedState == kLedStateSlowBlinkContinues ||
++ ledInfoPtr->savedLedState == kLedStateFastBlinkContinues)
++ ;
++ else
++ {
++ if (ledInfoPtr->blinkCountDown == 0) // skip the call if it is 1
++ {
++ ledToggle(ledInfoPtr);
++ ledInfoPtr->blinkCountDown = 1; // it will be reset to 0 when timer expires
++ ledInfoPtr->ledState = kLedStateBlinkOnce;
++ ledTimerStart();
++ }
++ }
++ break;
++
++ case kLedStateSlowBlinkContinues:
++ ledInfoPtr->blinkCountDown = kSlowBlinkCount;
++ ledInfoPtr->ledState = kLedStateSlowBlinkContinues;
++ ledInfoPtr->savedLedState = kLedStateSlowBlinkContinues;
++ ledTimerStart();
++ break;
++
++ case kLedStateFastBlinkContinues:
++ ledInfoPtr->blinkCountDown = kFastBlinkCount;
++ ledInfoPtr->ledState = kLedStateFastBlinkContinues;
++ ledInfoPtr->savedLedState = kLedStateFastBlinkContinues;
++ ledTimerStart();
++ break;
++
++ default:
++ printk("Invalid led state\n");
++ }
++}
++
++// This function is called for an LED that is controlled by hardware.
++void kerSysLedRegisterHwHandler( BOARD_LED_NAME ledName,
++ HANDLE_LED_FUNC ledHwFunc, int ledFailType )
++{
++ if( (int) ledName < MAX_VIRT_LEDS )
++ {
++ if( ledFailType == 1 )
++ gLedHwFailFunc[(int) ledName] = ledHwFunc;
++ else
++ gLedHwFunc[(int) ledName] = ledHwFunc;
++ }
++}
++
+diff -urN linux-2.6.8.1/bcmdrivers/opensource/char/board/bcm963xx/bcm96348/board.c linux-2.6.8.1-brcm63xx/bcmdrivers/opensource/char/board/bcm963xx/bcm96348/board.c
+--- linux-2.6.8.1/bcmdrivers/opensource/char/board/bcm963xx/bcm96348/board.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.8.1-brcm63xx/bcmdrivers/opensource/char/board/bcm963xx/bcm96348/board.c 2006-06-26 09:07:10.000000000 +0200
+@@ -0,0 +1,1570 @@
++/*
++<:copyright-gpl
++ Copyright 2002 Broadcom Corp. All Rights Reserved.
++
++ This program is free software; you can distribute it and/or modify it
++ under the terms of the GNU General Public License (Version 2) as
++ published by the Free Software Foundation.
++
++ This program is distributed in the hope it will be useful, but WITHOUT
++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
++ for more details.
++
++ You should have received a copy of the GNU General Public License along
++ with this program; if not, write to the Free Software Foundation, Inc.,
++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
++:>
++*/
++/***************************************************************************
++ * File Name : board.c
++ *
++ * Description: This file contains Linux character device driver entry
++ * for the board related ioctl calls: flash, get free kernel
++ * page and dump kernel memory, etc.
++ *
++ * Created on : 2/20/2002 seanl: use cfiflash.c, cfliflash.h (AMD specific)
++ *
++ ***************************************************************************/
++
++
++/* Includes. */
++#include <linux/version.h>
++#include <linux/init.h>
++#include <linux/fs.h>
++#include <linux/interrupt.h>
++#include <linux/capability.h>
++#include <linux/slab.h>
++#include <linux/errno.h>
++#include <linux/module.h>
++#include <linux/pagemap.h>
++#include <asm/uaccess.h>
++#include <linux/wait.h>
++#include <linux/poll.h>
++#include <linux/sched.h>
++#include <linux/list.h>
++#include <linux/if.h>
++
++#include <bcm_map_part.h>
++#include <board.h>
++#include <bcmTag.h>
++#include "boardparms.h"
++#include "cfiflash.h"
++#include "bcm_intr.h"
++#include "board.h"
++#include "bcm_map_part.h"
++
++/* Typedefs. */
++#if defined (NON_CONSECUTIVE_MAC)
++// used to be the last octet. Now changed to the first 5 bits of the the forth octet
++// to reduced the duplicated MAC addresses.
++#define CHANGED_OCTET 3
++#define SHIFT_BITS 3
++#else
++#define CHANGED_OCTET 1
++#define SHIFT_BITS 0
++#endif
++
++#if defined (WIRELESS)
++#define SES_BTN_PRESSED 0x00000001
++#define SES_EVENTS SES_BTN_PRESSED /*OR all values if any*/
++#define SES_LED_OFF 0
++#define SES_LED_ON 1
++#define SES_LED_BLINK 2
++#endif
++
++typedef struct
++{
++ unsigned long ulId;
++ char chInUse;
++ char chReserved[3];
++} MAC_ADDR_INFO, *PMAC_ADDR_INFO;
++
++typedef struct
++{
++ unsigned long ulSdramSize;
++ unsigned long ulPsiSize;
++ unsigned long ulNumMacAddrs;
++ unsigned long ucaBaseMacAddr[NVRAM_MAC_ADDRESS_LEN];
++ MAC_ADDR_INFO MacAddrs[1];
++} NVRAM_INFO, *PNVRAM_INFO;
++
++typedef struct
++{
++ unsigned long eventmask;
++} BOARD_IOC, *PBOARD_IOC;
++
++
++/*Dyinggasp callback*/
++typedef void (*cb_dgasp_t)(void *arg);
++typedef struct _CB_DGASP__LIST
++{
++ struct list_head list;
++ char name[IFNAMSIZ];
++ cb_dgasp_t cb_dgasp_fn;
++ void *context;
++}CB_DGASP_LIST , *PCB_DGASP_LIST;
++
++
++static LED_MAP_PAIR LedMapping[] =
++{ // led name Initial state physical pin (ledMask)
++ {kLedEnd, kLedStateOff, 0, 0, 0, 0},
++ {kLedEnd, kLedStateOff, 0, 0, 0, 0},
++ {kLedEnd, kLedStateOff, 0, 0, 0, 0},
++ {kLedEnd, kLedStateOff, 0, 0, 0, 0},
++ {kLedEnd, kLedStateOff, 0, 0, 0, 0},
++ {kLedEnd, kLedStateOff, 0, 0, 0, 0},
++ {kLedEnd, kLedStateOff, 0, 0, 0, 0},
++ {kLedEnd, kLedStateOff, 0, 0, 0, 0},
++ {kLedEnd, kLedStateOff, 0, 0, 0, 0} // NOTE: kLedEnd has to be at the end.
++};
++
++/* Externs. */
++extern struct file fastcall *fget_light(unsigned int fd, int *fput_needed);
++extern unsigned int nr_free_pages (void);
++extern const char *get_system_type(void);
++extern void kerSysFlashInit(void);
++extern unsigned long get_nvram_start_addr(void);
++extern unsigned long get_scratch_pad_start_addr(void);
++extern unsigned long getMemorySize(void);
++extern void __init boardLedInit(PLED_MAP_PAIR);
++extern void boardLedCtrl(BOARD_LED_NAME, BOARD_LED_STATE);
++extern void kerSysLedRegisterHandler( BOARD_LED_NAME ledName,
++ HANDLE_LED_FUNC ledHwFunc, int ledFailType );
++
++/* Prototypes. */
++void __init InitNvramInfo( void );
++static int board_open( struct inode *inode, struct file *filp );
++static int board_ioctl( struct inode *inode, struct file *flip, unsigned int command, unsigned long arg );
++static ssize_t board_read(struct file *filp, char __user *buffer, size_t count, loff_t *ppos);
++static unsigned int board_poll(struct file *filp, struct poll_table_struct *wait);
++static int board_release(struct inode *inode, struct file *filp);
++
++static BOARD_IOC* borad_ioc_alloc(void);
++static void borad_ioc_free(BOARD_IOC* board_ioc);
++
++/* DyingGasp function prototype */
++static void __init kerSysDyingGaspMapIntr(void);
++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0))
++static irqreturn_t kerSysDyingGaspIsr(int irq, void * dev_id, struct pt_regs * regs);
++#else
++static unsigned int kerSysDyingGaspIsr(void);
++#endif
++static void __init kerSysInitDyingGaspHandler( void );
++static void __exit kerSysDeinitDyingGaspHandler( void );
++/* -DyingGasp function prototype - */
++
++
++#if defined (WIRELESS)
++static irqreturn_t sesBtn_isr(int irq, void *dev_id, struct pt_regs *ptregs);
++static void __init sesBtn_mapGpio(void);
++static void __init sesBtn_mapIntr(int context);
++static unsigned int sesBtn_poll(struct file *file, struct poll_table_struct *wait);
++static ssize_t sesBtn_read(struct file *file, char __user *buffer, size_t count, loff_t *ppos);
++static void __init sesLed_mapGpio(void);
++static void sesLed_ctrl(int action);
++static void __init ses_board_init(void);
++static void __exit ses_board_deinit(void);
++#endif
++
++static PNVRAM_INFO g_pNvramInfo = NULL;
++static int g_ledInitialized = 0;
++static wait_queue_head_t g_board_wait_queue;
++static CB_DGASP_LIST *g_cb_dgasp_list_head = NULL;
++
++static int g_wakeup_monitor = 0;
++static struct file *g_monitor_file = NULL;
++static struct task_struct *g_monitor_task = NULL;
++static unsigned int (*g_orig_fop_poll)
++ (struct file *, struct poll_table_struct *) = NULL;
++
++static struct file_operations board_fops =
++{
++ open: board_open,
++ ioctl: board_ioctl,
++ poll: board_poll,
++ read: board_read,
++ release: board_release,
++};
++
++uint32 board_major = 0;
++
++#if defined (WIRELESS)
++static unsigned short sesBtn_irq = BP_NOT_DEFINED;
++static unsigned short sesBtn_gpio = BP_NOT_DEFINED;
++static unsigned short sesLed_gpio = BP_NOT_DEFINED;
++#endif
++
++#if defined(MODULE)
++int init_module(void)
++{
++ return( brcm_board_init() );
++}
++
++void cleanup_module(void)
++{
++ if (MOD_IN_USE)
++ printk("brcm flash: cleanup_module failed because module is in use\n");
++ else
++ brcm_board_cleanup();
++}
++#endif //MODULE
++
++
++
++static int __init brcm_board_init( void )
++{
++ typedef int (*BP_LED_FUNC) (unsigned short *);
++ static struct BpLedInformation
++ {
++ BOARD_LED_NAME ledName;
++ BP_LED_FUNC bpFunc;
++ BP_LED_FUNC bpFuncFail;
++ } bpLedInfo[] =
++ {{kLedAdsl, BpGetAdslLedGpio, BpGetAdslFailLedGpio},
++ {kLedWireless, BpGetWirelessLedGpio, NULL},
++ {kLedUsb, BpGetUsbLedGpio, NULL},
++ {kLedHpna, BpGetHpnaLedGpio, NULL},
++ {kLedWanData, BpGetWanDataLedGpio, NULL},
++ {kLedPPP, BpGetPppLedGpio, BpGetPppFailLedGpio},
++ {kLedVoip, BpGetVoipLedGpio, NULL},
++ {kLedSes, BpGetWirelessSesLedGpio, NULL},
++ {kLedEnd, NULL, NULL}
++ };
++
++ int ret;
++
++ ret = register_chrdev(BOARD_DRV_MAJOR, "bcrmboard", &board_fops );
++ if (ret < 0)
++ printk( "brcm_board_init(major %d): fail to register device.\n",BOARD_DRV_MAJOR);
++ else
++ {
++ PLED_MAP_PAIR pLedMap = LedMapping;
++ unsigned short gpio;
++ struct BpLedInformation *pInfo;
++
++ printk("brcmboard: brcm_board_init entry\n");
++ board_major = BOARD_DRV_MAJOR;
++ InitNvramInfo();
++
++ for( pInfo = bpLedInfo; pInfo->ledName != kLedEnd; pInfo++ )
++ {
++ if( pInfo->bpFunc && (*pInfo->bpFunc) (&gpio) == BP_SUCCESS )
++ {
++ pLedMap->ledName = pInfo->ledName;
++ pLedMap->ledMask = GPIO_NUM_TO_MASK(gpio);
++ pLedMap->ledActiveLow = (gpio & BP_ACTIVE_LOW) ? 1 : 0;
++ }
++ if( pInfo->bpFuncFail && (*pInfo->bpFuncFail) (&gpio) == BP_SUCCESS )
++ {
++ pLedMap->ledName = pInfo->ledName;
++ pLedMap->ledMaskFail = GPIO_NUM_TO_MASK(gpio);
++ pLedMap->ledActiveLowFail = (gpio & BP_ACTIVE_LOW) ? 1 : 0;
++ }
++ if( pLedMap->ledName != kLedEnd )
++ pLedMap++;
++ }
++
++ init_waitqueue_head(&g_board_wait_queue);
++#if defined (WIRELESS)
++ ses_board_init();
++#endif
++ kerSysInitDyingGaspHandler();
++ kerSysDyingGaspMapIntr();
++
++ boardLedInit(LedMapping);
++ g_ledInitialized = 1;
++ }
++
++ return ret;
++}
++
++void __init InitNvramInfo( void )
++{
++ PNVRAM_DATA pNvramData = (PNVRAM_DATA) get_nvram_start_addr();
++ unsigned long ulNumMacAddrs = pNvramData->ulNumMacAddrs;
++
++ if( ulNumMacAddrs > 0 && ulNumMacAddrs <= NVRAM_MAC_COUNT_MAX )
++ {
++ unsigned long ulNvramInfoSize =
++ sizeof(NVRAM_INFO) + ((sizeof(MAC_ADDR_INFO) - 1) * ulNumMacAddrs);
++
++ g_pNvramInfo = (PNVRAM_INFO) kmalloc( ulNvramInfoSize, GFP_KERNEL );
++
++ if( g_pNvramInfo )
++ {
++ unsigned long ulPsiSize;
++ if( BpGetPsiSize( &ulPsiSize ) != BP_SUCCESS )
++ ulPsiSize = NVRAM_PSI_DEFAULT;
++ memset( g_pNvramInfo, 0x00, ulNvramInfoSize );
++ g_pNvramInfo->ulPsiSize = ulPsiSize * 1024;
++ g_pNvramInfo->ulNumMacAddrs = pNvramData->ulNumMacAddrs;
++ memcpy( g_pNvramInfo->ucaBaseMacAddr, pNvramData->ucaBaseMacAddr,
++ NVRAM_MAC_ADDRESS_LEN );
++ g_pNvramInfo->ulSdramSize = getMemorySize();
++ }
++ else
++ printk("ERROR - Could not allocate memory for NVRAM data\n");
++ }
++ else
++ printk("ERROR - Invalid number of MAC addresses (%ld) is configured.\n",
++ ulNumMacAddrs);
++}
++
++void __exit brcm_board_cleanup( void )
++{
++ printk("brcm_board_cleanup()\n");
++
++ if (board_major != -1)
++ {
++#if defined (WIRELESS)
++ ses_board_deinit();
++#endif
++ kerSysDeinitDyingGaspHandler();
++ unregister_chrdev(board_major, "board_ioctl");
++ }
++}
++
++static BOARD_IOC* borad_ioc_alloc(void)
++{
++ BOARD_IOC *board_ioc =NULL;
++ board_ioc = (BOARD_IOC*) kmalloc( sizeof(BOARD_IOC) , GFP_KERNEL );
++ if(board_ioc)
++ {
++ memset(board_ioc, 0, sizeof(BOARD_IOC));
++ }
++ return board_ioc;
++}
++
++static void borad_ioc_free(BOARD_IOC* board_ioc)
++{
++ if(board_ioc)
++ {
++ kfree(board_ioc);
++ }
++}
++
++
++static int board_open( struct inode *inode, struct file *filp )
++{
++ filp->private_data = borad_ioc_alloc();
++
++ if (filp->private_data == NULL)
++ return -ENOMEM;
++
++ return( 0 );
++}
++
++static int board_release(struct inode *inode, struct file *filp)
++{
++ BOARD_IOC *board_ioc = filp->private_data;
++
++ wait_event_interruptible(g_board_wait_queue, 1);
++ borad_ioc_free(board_ioc);
++
++ return( 0 );
++}
++
++
++static unsigned int board_poll(struct file *filp, struct poll_table_struct *wait)
++{
++ unsigned int mask = 0;
++#if defined (WIRELESS)
++ BOARD_IOC *board_ioc = filp->private_data;
++#endif
++
++ poll_wait(filp, &g_board_wait_queue, wait);
++#if defined (WIRELESS)
++ if(board_ioc->eventmask & SES_EVENTS){
++ mask |= sesBtn_poll(filp, wait);
++ }
++#endif
++
++ return mask;
++}
++
++
++static ssize_t board_read(struct file *filp, char __user *buffer, size_t count, loff_t *ppos)
++{
++#if defined (WIRELESS)
++ BOARD_IOC *board_ioc = filp->private_data;
++ if(board_ioc->eventmask & SES_EVENTS){
++ return sesBtn_read(filp, buffer, count, ppos);
++ }
++#endif
++ return 0;
++}
++
++//**************************************************************************************
++// Utitlities for dump memory, free kernel pages, mips soft reset, etc.
++//**************************************************************************************
++
++/***********************************************************************
++ * Function Name: dumpaddr
++ * Description : Display a hex dump of the specified address.
++ ***********************************************************************/
++void dumpaddr( unsigned char *pAddr, int nLen )
++{
++ static char szHexChars[] = "0123456789abcdef";
++ char szLine[80];
++ char *p = szLine;
++ unsigned char ch, *q;
++ int i, j;
++ unsigned long ul;
++
++ while( nLen > 0 )
++ {
++ sprintf( szLine, "%8.8lx: ", (unsigned long) pAddr );
++ p = szLine + strlen(szLine);
++
++ for(i = 0; i < 16 && nLen > 0; i += sizeof(long), nLen -= sizeof(long))
++ {
++ ul = *(unsigned long *) &pAddr[i];
++ q = (unsigned char *) &ul;
++ for( j = 0; j < sizeof(long); j++ )
++ {
++ *p++ = szHexChars[q[j] >> 4];
++ *p++ = szHexChars[q[j] & 0x0f];
++ *p++ = ' ';
++ }
++ }
++
++ for( j = 0; j < 16 - i; j++ )
++ *p++ = ' ', *p++ = ' ', *p++ = ' ';
++
++ *p++ = ' ', *p++ = ' ', *p++ = ' ';
++
++ for( j = 0; j < i; j++ )
++ {
++ ch = pAddr[j];
++ *p++ = (ch > ' ' && ch < '~') ? ch : '.';
++ }
++
++ *p++ = '\0';
++ printk( "%s\r\n", szLine );
++
++ pAddr += i;
++ }
++ printk( "\r\n" );
++} /* dumpaddr */
++
++
++void kerSysMipsSoftReset(void)
++{
++#if defined(CONFIG_BCM96348)
++ if (PERF->RevID == 0x634800A1) {
++ typedef void (*FNPTR) (void);
++ FNPTR bootaddr = (FNPTR) FLASH_BASE;
++ int i;
++
++ /* Disable interrupts. */
++ cli();
++
++ /* Reset all blocks. */
++ PERF->BlockSoftReset &= ~BSR_ALL_BLOCKS;
++ for( i = 0; i < 1000000; i++ )
++ ;
++ PERF->BlockSoftReset |= BSR_ALL_BLOCKS;
++ /* Jump to the power on address. */
++ (*bootaddr) ();
++ }
++ else
++ PERF->pll_control |= SOFT_RESET; // soft reset mips
++#else
++ PERF->pll_control |= SOFT_RESET; // soft reset mips
++#endif
++}
++
++
++int kerSysGetMacAddress( unsigned char *pucaMacAddr, unsigned long ulId )
++{
++ int nRet = 0;
++ PMAC_ADDR_INFO pMai = NULL;
++ PMAC_ADDR_INFO pMaiFreeNoId = NULL;
++ PMAC_ADDR_INFO pMaiFreeId = NULL;
++ unsigned long i = 0, ulIdxNoId = 0, ulIdxId = 0, shiftedIdx = 0;
++
++ for( i = 0, pMai = g_pNvramInfo->MacAddrs; i < g_pNvramInfo->ulNumMacAddrs;
++ i++, pMai++ )
++ {
++ if( ulId == pMai->ulId || ulId == MAC_ADDRESS_ANY )
++ {
++ /* This MAC address has been used by the caller in the past. */
++ memcpy( pucaMacAddr, g_pNvramInfo->ucaBaseMacAddr,
++ NVRAM_MAC_ADDRESS_LEN );
++ shiftedIdx = i;
++ pucaMacAddr[NVRAM_MAC_ADDRESS_LEN - CHANGED_OCTET] += (shiftedIdx << SHIFT_BITS);
++ pMai->chInUse = 1;
++ pMaiFreeNoId = pMaiFreeId = NULL;
++ break;
++ }
++ else
++ if( pMai->chInUse == 0 )
++ {
++ if( pMai->ulId == 0 && pMaiFreeNoId == NULL )
++ {
++ /* This is an available MAC address that has never been
++ * used.
++ */
++ pMaiFreeNoId = pMai;
++ ulIdxNoId = i;
++ }
++ else
++ if( pMai->ulId != 0 && pMaiFreeId == NULL )
++ {
++ /* This is an available MAC address that has been used
++ * before. Use addresses that have never been used
++ * first, before using this one.
++ */
++ pMaiFreeId = pMai;
++ ulIdxId = i;
++ }
++ }
++ }
++
++ if( pMaiFreeNoId || pMaiFreeId )
++ {
++ /* An available MAC address was found. */
++ memcpy(pucaMacAddr, g_pNvramInfo->ucaBaseMacAddr,NVRAM_MAC_ADDRESS_LEN);
++ if( pMaiFreeNoId )
++ {
++ shiftedIdx = ulIdxNoId;
++ pucaMacAddr[NVRAM_MAC_ADDRESS_LEN - CHANGED_OCTET] += (shiftedIdx << SHIFT_BITS);
++ pMaiFreeNoId->ulId = ulId;
++ pMaiFreeNoId->chInUse = 1;
++ }
++ else
++ {
++ shiftedIdx = ulIdxId;
++ pucaMacAddr[NVRAM_MAC_ADDRESS_LEN - CHANGED_OCTET] += (shiftedIdx << SHIFT_BITS);
++ pMaiFreeId->ulId = ulId;
++ pMaiFreeId->chInUse = 1;
++ }
++ }
++ else
++ if( i == g_pNvramInfo->ulNumMacAddrs )
++ nRet = -EADDRNOTAVAIL;
++
++ return( nRet );
++} /* kerSysGetMacAddr */
++
++int kerSysReleaseMacAddress( unsigned char *pucaMacAddr )
++{
++ int nRet = -EINVAL;
++ unsigned long ulIdx = 0;
++ int idx = (pucaMacAddr[NVRAM_MAC_ADDRESS_LEN - CHANGED_OCTET] -
++ g_pNvramInfo->ucaBaseMacAddr[NVRAM_MAC_ADDRESS_LEN - CHANGED_OCTET]);
++
++ // if overflow 255 (negitive), add 256 to have the correct index
++ if (idx < 0)
++ idx += 256;
++ ulIdx = (unsigned long) (idx >> SHIFT_BITS);
++
++ if( ulIdx < g_pNvramInfo->ulNumMacAddrs )
++ {
++ PMAC_ADDR_INFO pMai = &g_pNvramInfo->MacAddrs[ulIdx];
++ if( pMai->chInUse == 1 )
++ {
++ pMai->chInUse = 0;
++ nRet = 0;
++ }
++ }
++
++ return( nRet );
++} /* kerSysReleaseMacAddr */
++
++int kerSysGetSdramSize( void )
++{
++ return( (int) g_pNvramInfo->ulSdramSize );
++} /* kerSysGetSdramSize */
++
++
++void kerSysLedCtrl(BOARD_LED_NAME ledName, BOARD_LED_STATE ledState)
++{
++ if (g_ledInitialized)
++ boardLedCtrl(ledName, ledState);
++}
++
++unsigned int kerSysMonitorPollHook( struct file *f, struct poll_table_struct *t)
++{
++ int mask = (*g_orig_fop_poll) (f, t);
++
++ if( g_wakeup_monitor == 1 && g_monitor_file == f )
++ {
++ /* If g_wakeup_monitor is non-0, the user mode application needs to
++ * return from a blocking select function. Return POLLPRI which will
++ * cause the select to return with the exception descriptor set.
++ */
++ mask |= POLLPRI;
++ g_wakeup_monitor = 0;
++ }
++
++ return( mask );
++}
++
++/* Put the user mode application that monitors link state on a run queue. */
++void kerSysWakeupMonitorTask( void )
++{
++ g_wakeup_monitor = 1;
++ if( g_monitor_task )
++ wake_up_process( g_monitor_task );
++}
++
++//********************************************************************************************
++// misc. ioctl calls come to here. (flash, led, reset, kernel memory access, etc.)
++//********************************************************************************************
++static int board_ioctl( struct inode *inode, struct file *flip,
++ unsigned int command, unsigned long arg )
++{
++ int ret = 0;
++ BOARD_IOCTL_PARMS ctrlParms;
++ unsigned char ucaMacAddr[NVRAM_MAC_ADDRESS_LEN];
++ int allowedSize;
++
++ switch (command)
++ {
++ case BOARD_IOCTL_FLASH_INIT:
++ // not used for now. kerSysBcmImageInit();
++ break;
++
++
++ case BOARD_IOCTL_FLASH_WRITE:
++ if (copy_from_user((void*)&ctrlParms, (void*)arg, sizeof(ctrlParms)) == 0)
++ {
++ NVRAM_DATA SaveNvramData;
++ PNVRAM_DATA pNvramData = (PNVRAM_DATA) get_nvram_start_addr();
++
++ switch (ctrlParms.action)
++ {
++ case SCRATCH_PAD:
++ ret = kerSysScratchPadSet(ctrlParms.string, ctrlParms.buf, ctrlParms.offset);
++ break;
++
++ case PERSISTENT:
++ ret = kerSysPersistentSet(ctrlParms.string, ctrlParms.strLen, ctrlParms.offset);
++ break;
++
++ case NVRAM:
++ ret = kerSysNvRamSet(ctrlParms.string, ctrlParms.strLen, ctrlParms.offset);
++ break;
++
++ case BCM_IMAGE_CFE:
++ if( ctrlParms.strLen <= 0 || ctrlParms.strLen > FLASH45_LENGTH_BOOT_ROM )
++ {
++ printk("Illegal CFE size [%d]. Size allowed: [%d]\n",
++ ctrlParms.strLen, FLASH45_LENGTH_BOOT_ROM);
++ ret = -1;
++ break;
++ }
++
++ // save NVRAM data into a local structure
++ memcpy( &SaveNvramData, pNvramData, sizeof(NVRAM_DATA) );
++
++ // set memory type field
++ BpGetSdramSize( (unsigned long *) &ctrlParms.string[SDRAM_TYPE_ADDRESS_OFFSET] );
++
++ ret = kerSysBcmImageSet(ctrlParms.offset, ctrlParms.string, ctrlParms.strLen);
++
++ // if nvram is not valid, restore the current nvram settings
++ if( BpSetBoardId( pNvramData->szBoardId ) != BP_SUCCESS &&
++ *(unsigned long *) pNvramData == NVRAM_DATA_ID )
++ {
++ kerSysNvRamSet((char *) &SaveNvramData, sizeof(SaveNvramData), 0);
++ }
++ break;
++
++ case BCM_IMAGE_FS:
++ allowedSize = (int) flash_get_total_size() - \
++ FLASH_RESERVED_AT_END - TAG_LEN - FLASH45_LENGTH_BOOT_ROM;
++ if( ctrlParms.strLen <= 0 || ctrlParms.strLen > allowedSize)
++ {
++ printk("Illegal root file system size [%d]. Size allowed: [%d]\n",
++ ctrlParms.strLen, allowedSize);
++ ret = -1;
++ break;
++ }
++ ret = kerSysBcmImageSet(ctrlParms.offset, ctrlParms.string, ctrlParms.strLen);
++ kerSysMipsSoftReset();
++ break;
++
++ case BCM_IMAGE_KERNEL: // not used for now.
++ break;
++ case BCM_IMAGE_WHOLE:
++ if(ctrlParms.strLen <= 0)
++ {
++ printk("Illegal flash image size [%d].\n", ctrlParms.strLen);
++ ret = -1;
++ break;
++ }
++
++ // save NVRAM data into a local structure
++ memcpy( &SaveNvramData, pNvramData, sizeof(NVRAM_DATA) );
++
++ ret = kerSysBcmImageSet(ctrlParms.offset, ctrlParms.string, ctrlParms.strLen);
++
++ // if nvram is not valid, restore the current nvram settings
++ if( BpSetBoardId( pNvramData->szBoardId ) != BP_SUCCESS &&
++ *(unsigned long *) pNvramData == NVRAM_DATA_ID )
++ {
++ kerSysNvRamSet((char *) &SaveNvramData, sizeof(SaveNvramData), 0);
++ }
++
++ kerSysMipsSoftReset();
++ break;
++
++ default:
++ ret = -EINVAL;
++ printk("flash_ioctl_command: invalid command %d\n", ctrlParms.action);
++ break;
++ }
++ ctrlParms.result = ret;
++ __copy_to_user((BOARD_IOCTL_PARMS*)arg, &ctrlParms, sizeof(BOARD_IOCTL_PARMS));
++ }
++ else
++ ret = -EFAULT;
++ break;
++
++ case BOARD_IOCTL_FLASH_READ:
++ if (copy_from_user((void*)&ctrlParms, (void*)arg, sizeof(ctrlParms)) == 0)
++ {
++ switch (ctrlParms.action)
++ {
++ case SCRATCH_PAD:
++ ret = kerSysScratchPadGet(ctrlParms.string, ctrlParms.buf, ctrlParms.offset);
++ break;
++
++ case PERSISTENT:
++ ret = kerSysPersistentGet(ctrlParms.string, ctrlParms.strLen, ctrlParms.offset);
++ break;
++
++ case NVRAM:
++ ret = kerSysNvRamGet(ctrlParms.string, ctrlParms.strLen, ctrlParms.offset);
++ break;
++
++ case FLASH_SIZE:
++ ret = kerSysFlashSizeGet();
++ break;
++
++ default:
++ ret = -EINVAL;
++ printk("Not supported. invalid command %d\n", ctrlParms.action);
++ break;
++ }
++ ctrlParms.result = ret;
++ __copy_to_user((BOARD_IOCTL_PARMS*)arg, &ctrlParms, sizeof(BOARD_IOCTL_PARMS));
++ }
++ else
++ ret = -EFAULT;
++ break;
++
++ case BOARD_IOCTL_GET_NR_PAGES:
++ ctrlParms.result = nr_free_pages() + get_page_cache_size();
++ __copy_to_user((BOARD_IOCTL_PARMS*)arg, &ctrlParms, sizeof(BOARD_IOCTL_PARMS));
++ ret = 0;
++ break;
++
++ case BOARD_IOCTL_DUMP_ADDR:
++ if (copy_from_user((void*)&ctrlParms, (void*)arg, sizeof(ctrlParms)) == 0)
++ {
++ dumpaddr( (unsigned char *) ctrlParms.string, ctrlParms.strLen );
++ ctrlParms.result = 0;
++ __copy_to_user((BOARD_IOCTL_PARMS*)arg, &ctrlParms, sizeof(BOARD_IOCTL_PARMS));
++ ret = 0;
++ }
++ else
++ ret = -EFAULT;
++ break;
++
++ case BOARD_IOCTL_SET_MEMORY:
++ if (copy_from_user((void*)&ctrlParms, (void*)arg, sizeof(ctrlParms)) == 0)
++ {
++ unsigned long *pul = (unsigned long *) ctrlParms.string;
++ unsigned short *pus = (unsigned short *) ctrlParms.string;
++ unsigned char *puc = (unsigned char *) ctrlParms.string;
++ switch( ctrlParms.strLen )
++ {
++ case 4:
++ *pul = (unsigned long) ctrlParms.offset;
++ break;
++ case 2:
++ *pus = (unsigned short) ctrlParms.offset;
++ break;
++ case 1:
++ *puc = (unsigned char) ctrlParms.offset;
++ break;
++ }
++ dumpaddr( (unsigned char *) ctrlParms.string, sizeof(long) );
++ ctrlParms.result = 0;
++ __copy_to_user((BOARD_IOCTL_PARMS*)arg, &ctrlParms, sizeof(BOARD_IOCTL_PARMS));
++ ret = 0;
++ }
++ else
++ ret = -EFAULT;
++ break;
++
++ case BOARD_IOCTL_MIPS_SOFT_RESET:
++ kerSysMipsSoftReset();
++ break;
++
++ case BOARD_IOCTL_LED_CTRL:
++ if (copy_from_user((void*)&ctrlParms, (void*)arg, sizeof(ctrlParms)) == 0)
++ {
++ kerSysLedCtrl((BOARD_LED_NAME)ctrlParms.strLen, (BOARD_LED_STATE)ctrlParms.offset);
++ ret = 0;
++ }
++ break;
++
++ case BOARD_IOCTL_GET_ID:
++ if (copy_from_user((void*)&ctrlParms, (void*)arg,
++ sizeof(ctrlParms)) == 0)
++ {
++ if( ctrlParms.string )
++ {
++ char *p = (char *) get_system_type();
++ if( strlen(p) + 1 < ctrlParms.strLen )
++ ctrlParms.strLen = strlen(p) + 1;
++ __copy_to_user(ctrlParms.string, p, ctrlParms.strLen);
++ }
++
++ ctrlParms.result = 0;
++ __copy_to_user((BOARD_IOCTL_PARMS*)arg, &ctrlParms,
++ sizeof(BOARD_IOCTL_PARMS));
++ }
++ break;
++
++ case BOARD_IOCTL_GET_MAC_ADDRESS:
++ if (copy_from_user((void*)&ctrlParms, (void*)arg, sizeof(ctrlParms)) == 0)
++ {
++ ctrlParms.result = kerSysGetMacAddress( ucaMacAddr,
++ ctrlParms.offset );
++
++ if( ctrlParms.result == 0 )
++ {
++ __copy_to_user(ctrlParms.string, ucaMacAddr,
++ sizeof(ucaMacAddr));
++ }
++
++ __copy_to_user((BOARD_IOCTL_PARMS*)arg, &ctrlParms,
++ sizeof(BOARD_IOCTL_PARMS));
++ ret = 0;
++ }
++ else
++ ret = -EFAULT;
++ break;
++
++ case BOARD_IOCTL_RELEASE_MAC_ADDRESS:
++ if (copy_from_user((void*)&ctrlParms, (void*)arg, sizeof(ctrlParms)) == 0)
++ {
++ if (copy_from_user((void*)ucaMacAddr, (void*)ctrlParms.string, \
++ NVRAM_MAC_ADDRESS_LEN) == 0)
++ {
++ ctrlParms.result = kerSysReleaseMacAddress( ucaMacAddr );
++ }
++ else
++ {
++ ctrlParms.result = -EACCES;
++ }
++
++ __copy_to_user((BOARD_IOCTL_PARMS*)arg, &ctrlParms,
++ sizeof(BOARD_IOCTL_PARMS));
++ ret = 0;
++ }
++ else
++ ret = -EFAULT;
++ break;
++
++ case BOARD_IOCTL_GET_PSI_SIZE:
++ ctrlParms.result = (int) g_pNvramInfo->ulPsiSize;
++ __copy_to_user((BOARD_IOCTL_PARMS*)arg, &ctrlParms, sizeof(BOARD_IOCTL_PARMS));
++ ret = 0;
++ break;
++
++ case BOARD_IOCTL_GET_SDRAM_SIZE:
++ ctrlParms.result = (int) g_pNvramInfo->ulSdramSize;
++ __copy_to_user((BOARD_IOCTL_PARMS*)arg, &ctrlParms, sizeof(BOARD_IOCTL_PARMS));
++ ret = 0;
++ break;
++
++ case BOARD_IOCTL_GET_BASE_MAC_ADDRESS:
++ if (copy_from_user((void*)&ctrlParms, (void*)arg, sizeof(ctrlParms)) == 0)
++ {
++ __copy_to_user(ctrlParms.string, g_pNvramInfo->ucaBaseMacAddr, NVRAM_MAC_ADDRESS_LEN);
++ ctrlParms.result = 0;
++
++ __copy_to_user((BOARD_IOCTL_PARMS*)arg, &ctrlParms,
++ sizeof(BOARD_IOCTL_PARMS));
++ ret = 0;
++ }
++ else
++ ret = -EFAULT;
++ break;
++
++ case BOARD_IOCTL_GET_CHIP_ID:
++ ctrlParms.result = (int) (PERF->RevID & 0xFFFF0000) >> 16;
++ __copy_to_user((BOARD_IOCTL_PARMS*)arg, &ctrlParms, sizeof(BOARD_IOCTL_PARMS));
++ ret = 0;
++ break;
++
++ case BOARD_IOCTL_GET_NUM_ENET: {
++ ETHERNET_MAC_INFO EnetInfos[BP_MAX_ENET_MACS];
++ int i, numeth = 0;
++ if (BpGetEthernetMacInfo(EnetInfos, BP_MAX_ENET_MACS) == BP_SUCCESS) {
++ for( i = 0; i < BP_MAX_ENET_MACS; i++) {
++ if (EnetInfos[i].ucPhyType != BP_ENET_NO_PHY) {
++ numeth++;
++ }
++ }
++ ctrlParms.result = numeth;
++ __copy_to_user((BOARD_IOCTL_PARMS*)arg, &ctrlParms, sizeof(BOARD_IOCTL_PARMS));
++ ret = 0;
++ }
++ else {
++ ret = -EFAULT;
++ }
++ break;
++ }
++
++ case BOARD_IOCTL_GET_CFE_VER:
++ if (copy_from_user((void*)&ctrlParms, (void*)arg, sizeof(ctrlParms)) == 0) {
++ char *vertag = (char *)(FLASH_BASE + CFE_VERSION_OFFSET);
++ if (ctrlParms.strLen < CFE_VERSION_SIZE) {
++ ctrlParms.result = 0;
++ __copy_to_user((BOARD_IOCTL_PARMS*)arg, &ctrlParms, sizeof(BOARD_IOCTL_PARMS));
++ ret = -EFAULT;
++ }
++ else if (strncmp(vertag, "cfe-v", 5)) { // no tag info in flash
++ ctrlParms.result = 0;
++ __copy_to_user((BOARD_IOCTL_PARMS*)arg, &ctrlParms, sizeof(BOARD_IOCTL_PARMS));
++ ret = 0;
++ }
++ else {
++ ctrlParms.result = 1;
++ __copy_to_user(ctrlParms.string, vertag+CFE_VERSION_MARK_SIZE, CFE_VERSION_SIZE);
++ __copy_to_user((BOARD_IOCTL_PARMS*)arg, &ctrlParms, sizeof(BOARD_IOCTL_PARMS));
++ ret = 0;
++ }
++ }
++ else {
++ ret = -EFAULT;
++ }
++ break;
++
++ case BOARD_IOCTL_GET_ENET_CFG:
++ if (copy_from_user((void*)&ctrlParms, (void*)arg, sizeof(ctrlParms)) == 0) {
++ ETHERNET_MAC_INFO EnetInfos[BP_MAX_ENET_MACS];
++ if (BpGetEthernetMacInfo(EnetInfos, BP_MAX_ENET_MACS) == BP_SUCCESS) {
++ if (ctrlParms.strLen == sizeof(EnetInfos)) {
++ __copy_to_user(ctrlParms.string, EnetInfos, sizeof(EnetInfos));
++ ctrlParms.result = 0;
++ __copy_to_user((BOARD_IOCTL_PARMS*)arg, &ctrlParms, sizeof(BOARD_IOCTL_PARMS));
++ ret = 0;
++ } else
++ ret = -EFAULT;
++ }
++ else {
++ ret = -EFAULT;
++ }
++ break;
++ }
++ else {
++ ret = -EFAULT;
++ }
++ break;
++
++#if defined (WIRELESS)
++ case BOARD_IOCTL_GET_WLAN_ANT_INUSE:
++ if (copy_from_user((void*)&ctrlParms, (void*)arg, sizeof(ctrlParms)) == 0) {
++ unsigned short antInUse = 0;
++ if (BpGetWirelessAntInUse(&antInUse) == BP_SUCCESS) {
++ if (ctrlParms.strLen == sizeof(antInUse)) {
++ __copy_to_user(ctrlParms.string, &antInUse, sizeof(antInUse));
++ ctrlParms.result = 0;
++ __copy_to_user((BOARD_IOCTL_PARMS*)arg, &ctrlParms, sizeof(BOARD_IOCTL_PARMS));
++ ret = 0;
++ } else
++ ret = -EFAULT;
++ }
++ else {
++ ret = -EFAULT;
++ }
++ break;
++ }
++ else {
++ ret = -EFAULT;
++ }
++ break;
++#endif
++ case BOARD_IOCTL_SET_TRIGGER_EVENT:
++ if (copy_from_user((void*)&ctrlParms, (void*)arg, sizeof(ctrlParms)) == 0) {
++ BOARD_IOC *board_ioc = (BOARD_IOC *)flip->private_data;
++ ctrlParms.result = -EFAULT;
++ ret = -EFAULT;
++ if (ctrlParms.strLen == sizeof(unsigned long)) {
++ board_ioc->eventmask |= *((int*)ctrlParms.string);
++#if defined (WIRELESS)
++ if((board_ioc->eventmask & SES_EVENTS)) {
++ if(sesBtn_irq != BP_NOT_DEFINED) {
++ BcmHalInterruptEnable(sesBtn_irq);
++ ctrlParms.result = 0;
++ ret = 0;
++ }
++ }
++#endif
++ __copy_to_user((BOARD_IOCTL_PARMS*)arg, &ctrlParms, sizeof(BOARD_IOCTL_PARMS));
++ }
++ break;
++ }
++ else {
++ ret = -EFAULT;
++ }
++ break;
++
++ case BOARD_IOCTL_GET_TRIGGER_EVENT:
++ if (copy_from_user((void*)&ctrlParms, (void*)arg, sizeof(ctrlParms)) == 0) {
++ BOARD_IOC *board_ioc = (BOARD_IOC *)flip->private_data;
++ if (ctrlParms.strLen == sizeof(unsigned long)) {
++ __copy_to_user(ctrlParms.string, &board_ioc->eventmask, sizeof(unsigned long));
++ ctrlParms.result = 0;
++ __copy_to_user((BOARD_IOCTL_PARMS*)arg, &ctrlParms, sizeof(BOARD_IOCTL_PARMS));
++ ret = 0;
++ } else
++ ret = -EFAULT;
++
++ break;
++ }
++ else {
++ ret = -EFAULT;
++ }
++ break;
++
++ case BOARD_IOCTL_UNSET_TRIGGER_EVENT:
++ if (copy_from_user((void*)&ctrlParms, (void*)arg, sizeof(ctrlParms)) == 0) {
++ if (ctrlParms.strLen == sizeof(unsigned long)) {
++ BOARD_IOC *board_ioc = (BOARD_IOC *)flip->private_data;
++ board_ioc->eventmask &= (~(*((int*)ctrlParms.string)));
++ ctrlParms.result = 0;
++ __copy_to_user((BOARD_IOCTL_PARMS*)arg, &ctrlParms, sizeof(BOARD_IOCTL_PARMS));
++ ret = 0;
++ } else
++ ret = -EFAULT;
++
++ break;
++ }
++ else {
++ ret = -EFAULT;
++ }
++ break;
++#if defined (WIRELESS)
++ case BOARD_IOCTL_SET_SES_LED:
++ if (copy_from_user((void*)&ctrlParms, (void*)arg, sizeof(ctrlParms)) == 0) {
++ if (ctrlParms.strLen == sizeof(int)) {
++ sesLed_ctrl(*(int*)ctrlParms.string);
++ ctrlParms.result = 0;
++ __copy_to_user((BOARD_IOCTL_PARMS*)arg, &ctrlParms, sizeof(BOARD_IOCTL_PARMS));
++ ret = 0;
++ } else
++ ret = -EFAULT;
++
++ break;
++ }
++ else {
++ ret = -EFAULT;
++ }
++ break;
++#endif
++
++ case BOARD_IOCTL_SET_MONITOR_FD:
++ if (copy_from_user((void*)&ctrlParms, (void*)arg, sizeof(ctrlParms)) == 0) {
++ int fput_needed = 0;
++
++ g_monitor_file = fget_light( ctrlParms.offset, &fput_needed );
++ if( g_monitor_file ) {
++ /* Hook this file descriptor's poll function in order to set
++ * the exception descriptor when there is a change in link
++ * state.
++ */
++ g_monitor_task = current;
++ g_orig_fop_poll = g_monitor_file->f_op->poll;
++ g_monitor_file->f_op->poll = kerSysMonitorPollHook;
++ }
++ }
++ break;
++
++ case BOARD_IOCTL_WAKEUP_MONITOR_TASK:
++ kerSysWakeupMonitorTask();
++ break;
++
++ default:
++ ret = -EINVAL;
++ ctrlParms.result = 0;
++ printk("board_ioctl: invalid command %x, cmd %d .\n",command,_IOC_NR(command));
++ break;
++
++ } /* switch */
++
++ return (ret);
++
++} /* board_ioctl */
++
++/***************************************************************************
++ * SES Button ISR/GPIO/LED functions.
++ ***************************************************************************/
++#if defined (WIRELESS)
++static irqreturn_t sesBtn_isr(int irq, void *dev_id, struct pt_regs *ptregs)
++{
++#if defined(_BCM96338_) || defined(CONFIG_BCM96338)
++ unsigned long gpio_mask = GPIO_NUM_TO_MASK(sesBtn_gpio);
++ volatile unsigned long *gpio_reg = &GPIO->GPIOio;
++#endif
++#if defined(_BCM96345_) || defined(CONFIG_BCM96345)
++ unsigned short gpio_mask = GPIO_NUM_TO_MASK(sesBtn_gpio);
++ volatile unsigned short *gpio_reg = &GPIO->GPIOio;
++#endif
++#if defined(_BCM96348_) || defined (CONFIG_BCM96348)
++ unsigned long gpio_mask = GPIO_NUM_TO_MASK(sesBtn_gpio);
++ volatile unsigned long *gpio_reg = &GPIO->GPIOio;
++
++ if( (sesBtn_gpio & ~BP_ACTIVE_MASK) >= 32 )
++ {
++ gpio_mask = GPIO_NUM_TO_MASK_HIGH(sesBtn_gpio);
++ gpio_reg = &GPIO->GPIOio_high;
++ }
++#endif
++
++ if (!(*gpio_reg & gpio_mask)){
++ wake_up_interruptible(&g_board_wait_queue);
++ return IRQ_RETVAL(1);
++ } else {
++ return IRQ_RETVAL(0);
++ }
++}
++
++static void __init sesBtn_mapGpio()
++{
++ if( BpGetWirelessSesBtnGpio(&sesBtn_gpio) == BP_SUCCESS )
++ {
++ printk("SES: Button GPIO 0x%x is enabled\n", sesBtn_gpio);
++ }
++}
++
++static void __init sesBtn_mapIntr(int context)
++{
++ if( BpGetWirelessSesExtIntr(&sesBtn_irq) == BP_SUCCESS )
++ {
++ printk("SES: Button Interrupt 0x%x is enabled\n", sesBtn_irq);
++ }
++ else
++ return;
++
++ sesBtn_irq += INTERRUPT_ID_EXTERNAL_0;
++
++ if (BcmHalMapInterrupt((FN_HANDLER)sesBtn_isr, context, sesBtn_irq)) {
++ printk("SES: Interrupt mapping failed\n");
++ }
++ BcmHalInterruptEnable(sesBtn_irq);
++}
++
++
++static unsigned int sesBtn_poll(struct file *file, struct poll_table_struct *wait)
++{
++#if defined(_BCM96338_) || defined(CONFIG_BCM96338)
++ unsigned long gpio_mask = GPIO_NUM_TO_MASK(sesBtn_gpio);
++ volatile unsigned long *gpio_reg = &GPIO->GPIOio;
++#endif
++#if defined(_BCM96345_) || defined(CONFIG_BCM96345)
++ unsigned short gpio_mask = GPIO_NUM_TO_MASK(sesBtn_gpio);
++ volatile unsigned short *gpio_reg = &GPIO->GPIOio;
++#endif
++#if defined(_BCM96348_) || defined (CONFIG_BCM96348)
++ unsigned long gpio_mask = GPIO_NUM_TO_MASK(sesBtn_gpio);
++ volatile unsigned long *gpio_reg = &GPIO->GPIOio;
++
++ if( (sesBtn_gpio & ~BP_ACTIVE_MASK) >= 32 )
++ {
++ gpio_mask = GPIO_NUM_TO_MASK_HIGH(sesBtn_gpio);
++ gpio_reg = &GPIO->GPIOio_high;
++ }
++#endif
++
++ if (!(*gpio_reg & gpio_mask)){
++ return POLLIN;
++ }
++ return 0;
++}
++
++static ssize_t sesBtn_read(struct file *file, char __user *buffer, size_t count, loff_t *ppos)
++{
++ volatile unsigned int event=0;
++ ssize_t ret=0;
++
++#if defined(_BCM96338_) || defined (CONFIG_BCM96338)
++ unsigned long gpio_mask = GPIO_NUM_TO_MASK(sesBtn_gpio);
++ volatile unsigned long *gpio_reg = &GPIO->GPIOio;
++#endif
++#if defined(_BCM96345_) || defined (CONFIG_BCM96345)
++ unsigned short gpio_mask = GPIO_NUM_TO_MASK(sesBtn_gpio);
++ volatile unsigned short *gpio_reg = &GPIO->GPIOio;
++#endif
++#if defined(_BCM96348_) || defined (CONFIG_BCM96348)
++ unsigned long gpio_mask = GPIO_NUM_TO_MASK(sesBtn_gpio);
++ volatile unsigned long *gpio_reg = &GPIO->GPIOio;
++
++ if( (sesBtn_gpio & ~BP_ACTIVE_MASK) >= 32 )
++ {
++ gpio_mask = GPIO_NUM_TO_MASK_HIGH(sesBtn_gpio);
++ gpio_reg = &GPIO->GPIOio_high;
++ }
++#endif
++
++ if(*gpio_reg & gpio_mask){
++ BcmHalInterruptEnable(sesBtn_irq);
++ return ret;
++ }
++ event = SES_EVENTS;
++ __copy_to_user((char*)buffer, (char*)&event, sizeof(event));
++ BcmHalInterruptEnable(sesBtn_irq);
++ count -= sizeof(event);
++ buffer += sizeof(event);
++ ret += sizeof(event);
++ return ret;
++}
++
++static void __init sesLed_mapGpio()
++{
++ if( BpGetWirelessSesBtnGpio(&sesLed_gpio) == BP_SUCCESS )
++ {
++ printk("SES: LED GPIO 0x%x is enabled\n", sesBtn_gpio);
++ }
++}
++
++static void sesLed_ctrl(int action)
++{
++
++ //char status = ((action >> 8) & 0xff); /* extract status */
++ //char event = ((action >> 16) & 0xff); /* extract event */
++ //char blinktype = ((action >> 24) & 0xff); /* extract blink type for SES_LED_BLINK */
++
++ BOARD_LED_STATE led;
++
++ if(sesLed_gpio == BP_NOT_DEFINED)
++ return;
++
++ action &= 0xff; /* extract led */
++
++ //printk("blinktype=%d, event=%d, status=%d\n",(int)blinktype, (int)event, (int)status);
++
++ switch (action)
++ {
++ case SES_LED_ON:
++ //printk("SES: led on\n");
++ led = kLedStateOn;
++ break;
++ case SES_LED_BLINK:
++ //printk("SES: led blink\n");
++ led = kLedStateSlowBlinkContinues;
++ break;
++ case SES_LED_OFF:
++ default:
++ //printk("SES: led off\n");
++ led = kLedStateOff;
++ }
++
++ kerSysLedCtrl(kLedSes, led);
++}
++
++static void __init ses_board_init()
++{
++ sesBtn_mapGpio();
++ sesBtn_mapIntr(0);
++ sesLed_mapGpio();
++}
++static void __exit ses_board_deinit()
++{
++ if(sesBtn_irq)
++ BcmHalInterruptDisable(sesBtn_irq);
++}
++#endif
++
++/***************************************************************************
++ * Dying gasp ISR and functions.
++ ***************************************************************************/
++#define KERSYS_DBG printk
++
++#if defined(CONFIG_BCM96345)
++#define CYCLE_PER_US 70
++#elif defined(CONFIG_BCM96348) || defined(CONFIG_BCM96338)
++/* The BCM6348 cycles per microsecond is really variable since the BCM6348
++ * MIPS speed can vary depending on the PLL settings. However, an appoximate
++ * value of 120 will still work OK for the test being done.
++ */
++#define CYCLE_PER_US 120
++#endif
++#define DG_GLITCH_TO (100*CYCLE_PER_US)
++
++static void __init kerSysDyingGaspMapIntr()
++{
++ unsigned long ulIntr;
++
++#if defined(CONFIG_BCM96348) || defined(_BCM96348_) || defined(CONFIG_BCM96338) || defined(_BCM96338_)
++ if( BpGetAdslDyingGaspExtIntr( &ulIntr ) == BP_SUCCESS ) {
++ BcmHalMapInterrupt((FN_HANDLER)kerSysDyingGaspIsr, 0, INTERRUPT_ID_DG);
++ BcmHalInterruptEnable( INTERRUPT_ID_DG );
++ }
++#elif defined(CONFIG_BCM96345) || defined(_BCM96345_)
++ if( BpGetAdslDyingGaspExtIntr( &ulIntr ) == BP_SUCCESS ) {
++ ulIntr += INTERRUPT_ID_EXTERNAL_0;
++ BcmHalMapInterrupt((FN_HANDLER)kerSysDyingGaspIsr, 0, ulIntr);
++ BcmHalInterruptEnable( ulIntr );
++ }
++#endif
++
++}
++
++void kerSysSetWdTimer(ulong timeUs)
++{
++ TIMER->WatchDogDefCount = timeUs * (FPERIPH/1000000);
++ TIMER->WatchDogCtl = 0xFF00;
++ TIMER->WatchDogCtl = 0x00FF;
++}
++
++ulong kerSysGetCycleCount(void)
++{
++ ulong cnt;
++#ifdef _WIN32_WCE
++ cnt = 0;
++#else
++ __asm volatile("mfc0 %0, $9":"=d"(cnt));
++#endif
++ return(cnt);
++}
++
++static Bool kerSysDyingGaspCheckPowerLoss(void)
++{
++ ulong clk0;
++ ulong ulIntr;
++
++ ulIntr = 0;
++ clk0 = kerSysGetCycleCount();
++
++ UART->Data = 'D';
++ UART->Data = '%';
++ UART->Data = 'G';
++
++#if defined(CONFIG_BCM96345)
++ BpGetAdslDyingGaspExtIntr( &ulIntr );
++
++ do {
++ ulong clk1;
++
++ clk1 = kerSysGetCycleCount(); /* time cleared */
++ /* wait a little to get new reading */
++ while ((kerSysGetCycleCount()-clk1) < CYCLE_PER_US*2)
++ ;
++ } while ((0 == (PERF->ExtIrqCfg & (1 << (ulIntr + EI_STATUS_SHFT)))) && ((kerSysGetCycleCount() - clk0) < DG_GLITCH_TO));
++
++ if (PERF->ExtIrqCfg & (1 << (ulIntr + EI_STATUS_SHFT))) { /* power glitch */
++ BcmHalInterruptEnable( ulIntr + INTERRUPT_ID_EXTERNAL_0);
++ KERSYS_DBG(" - Power glitch detected. Duration: %ld us\n", (kerSysGetCycleCount() - clk0)/CYCLE_PER_US);
++ return 0;
++ }
++#elif (defined(CONFIG_BCM96348) || defined(CONFIG_BCM96338)) && !defined(VXWORKS)
++ do {
++ ulong clk1;
++
++ clk1 = kerSysGetCycleCount(); /* time cleared */
++ /* wait a little to get new reading */
++ while ((kerSysGetCycleCount()-clk1) < CYCLE_PER_US*2)
++ ;
++ } while ((PERF->IrqStatus & (1 << (INTERRUPT_ID_DG - INTERNAL_ISR_TABLE_OFFSET))) && ((kerSysGetCycleCount() - clk0) < DG_GLITCH_TO));
++
++ if (!(PERF->IrqStatus & (1 << (INTERRUPT_ID_DG - INTERNAL_ISR_TABLE_OFFSET)))) {
++ BcmHalInterruptEnable( INTERRUPT_ID_DG );
++ KERSYS_DBG(" - Power glitch detected. Duration: %ld us\n", (kerSysGetCycleCount() - clk0)/CYCLE_PER_US);
++ return 0;
++ }
++#endif
++ return 1;
++}
++
++static void kerSysDyingGaspShutdown( void )
++{
++ kerSysSetWdTimer(1000000);
++#if defined(CONFIG_BCM96345)
++ PERF->blkEnables &= ~(EMAC_CLK_EN | USB_CLK_EN | CPU_CLK_EN);
++#elif defined(CONFIG_BCM96348)
++ PERF->blkEnables &= ~(EMAC_CLK_EN | USBS_CLK_EN | USBH_CLK_EN | SAR_CLK_EN);
++#endif
++}
++
++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0))
++static irqreturn_t kerSysDyingGaspIsr(int irq, void * dev_id, struct pt_regs * regs)
++#else
++static unsigned int kerSysDyingGaspIsr(void)
++#endif
++{
++ struct list_head *pos;
++ CB_DGASP_LIST *tmp, *dsl = NULL;
++
++ if (kerSysDyingGaspCheckPowerLoss()) {
++
++ /* first to turn off everything other than dsl */
++ list_for_each(pos, &g_cb_dgasp_list_head->list) {
++ tmp = list_entry(pos, CB_DGASP_LIST, list);
++ if(strncmp(tmp->name, "dsl", 3)) {
++ (tmp->cb_dgasp_fn)(tmp->context);
++ }else {
++ dsl = tmp;
++ }
++ }
++
++ /* now send dgasp */
++ if(dsl)
++ (dsl->cb_dgasp_fn)(dsl->context);
++
++ /* reset and shutdown system */
++ kerSysDyingGaspShutdown();
++ }
++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0))
++return( IRQ_HANDLED );
++#else
++ return( 1 );
++#endif
++}
++
++static void __init kerSysInitDyingGaspHandler( void )
++{
++ CB_DGASP_LIST *new_node;
++
++ if( g_cb_dgasp_list_head != NULL) {
++ printk("Error: kerSysInitDyingGaspHandler: list head is not null\n");
++ return;
++ }
++ new_node= (CB_DGASP_LIST *)kmalloc(sizeof(CB_DGASP_LIST), GFP_KERNEL);
++ memset(new_node, 0x00, sizeof(CB_DGASP_LIST));
++ INIT_LIST_HEAD(&new_node->list);
++ g_cb_dgasp_list_head = new_node;
++
++} /* kerSysInitDyingGaspHandler */
++
++static void __exit kerSysDeinitDyingGaspHandler( void )
++{
++ struct list_head *pos;
++ CB_DGASP_LIST *tmp;
++
++ if(g_cb_dgasp_list_head == NULL)
++ return;
++
++ list_for_each(pos, &g_cb_dgasp_list_head->list) {
++ tmp = list_entry(pos, CB_DGASP_LIST, list);
++ list_del(pos);
++ kfree(tmp);
++ }
++
++ kfree(g_cb_dgasp_list_head);
++ g_cb_dgasp_list_head = NULL;
++
++} /* kerSysDeinitDyingGaspHandler */
++
++void kerSysRegisterDyingGaspHandler(char *devname, void *cbfn, void *context)
++{
++ CB_DGASP_LIST *new_node;
++
++ if( g_cb_dgasp_list_head == NULL) {
++ printk("Error: kerSysRegisterDyingGaspHandler: list head is null\n");
++ return;
++ }
++
++ if( devname == NULL || cbfn == NULL ) {
++ printk("Error: kerSysRegisterDyingGaspHandler: register info not enough (%s,%x,%x)\n", devname, (unsigned int)cbfn, (unsigned int)context);
++ return;
++ }
++
++ new_node= (CB_DGASP_LIST *)kmalloc(sizeof(CB_DGASP_LIST), GFP_KERNEL);
++ memset(new_node, 0x00, sizeof(CB_DGASP_LIST));
++ INIT_LIST_HEAD(&new_node->list);
++ strncpy(new_node->name, devname, IFNAMSIZ);
++ new_node->cb_dgasp_fn = (cb_dgasp_t)cbfn;
++ new_node->context = context;
++ list_add(&new_node->list, &g_cb_dgasp_list_head->list);
++
++ printk("dgasp: kerSysRegisterDyingGaspHandler: %s registered \n", devname);
++
++} /* kerSysRegisterDyingGaspHandler */
++
++void kerSysDeregisterDyingGaspHandler(char *devname)
++{
++ struct list_head *pos;
++ CB_DGASP_LIST *tmp;
++
++ if(g_cb_dgasp_list_head == NULL) {
++ printk("Error: kerSysDeregisterDyingGaspHandler: list head is null\n");
++ return;
++ }
++
++ if(devname == NULL) {
++ printk("Error: kerSysDeregisterDyingGaspHandler: devname is null\n");
++ return;
++ }
++
++ printk("kerSysDeregisterDyingGaspHandler: %s is deregistering\n", devname);
++
++ list_for_each(pos, &g_cb_dgasp_list_head->list) {
++ tmp = list_entry(pos, CB_DGASP_LIST, list);
++ if(!strcmp(tmp->name, devname)) {
++ list_del(pos);
++ kfree(tmp);
++ printk("kerSysDeregisterDyingGaspHandler: %s is deregistered\n", devname);
++ return;
++ }
++ }
++ printk("kerSysDeregisterDyingGaspHandler: %s not (de)registered\n", devname);
++
++} /* kerSysDeregisterDyingGaspHandler */
++
++/***************************************************************************
++ * MACRO to call driver initialization and cleanup functions.
++ ***************************************************************************/
++module_init( brcm_board_init );
++module_exit( brcm_board_cleanup );
++
++EXPORT_SYMBOL(kerSysNvRamGet);
++EXPORT_SYMBOL(dumpaddr);
++EXPORT_SYMBOL(kerSysGetMacAddress);
++EXPORT_SYMBOL(kerSysReleaseMacAddress);
++EXPORT_SYMBOL(kerSysGetSdramSize);
++EXPORT_SYMBOL(kerSysLedCtrl);
++EXPORT_SYMBOL(kerSysLedRegisterHwHandler);
++EXPORT_SYMBOL(BpGetBoardIds);
++EXPORT_SYMBOL(BpGetSdramSize);
++EXPORT_SYMBOL(BpGetPsiSize);
++EXPORT_SYMBOL(BpGetEthernetMacInfo);
++EXPORT_SYMBOL(BpGetRj11InnerOuterPairGpios);
++EXPORT_SYMBOL(BpGetPressAndHoldResetGpio);
++EXPORT_SYMBOL(BpGetVoipResetGpio);
++EXPORT_SYMBOL(BpGetVoipIntrGpio);
++EXPORT_SYMBOL(BpGetPcmciaResetGpio);
++EXPORT_SYMBOL(BpGetRtsCtsUartGpios);
++EXPORT_SYMBOL(BpGetAdslLedGpio);
++EXPORT_SYMBOL(BpGetAdslFailLedGpio);
++EXPORT_SYMBOL(BpGetWirelessLedGpio);
++EXPORT_SYMBOL(BpGetUsbLedGpio);
++EXPORT_SYMBOL(BpGetHpnaLedGpio);
++EXPORT_SYMBOL(BpGetWanDataLedGpio);
++EXPORT_SYMBOL(BpGetPppLedGpio);
++EXPORT_SYMBOL(BpGetPppFailLedGpio);
++EXPORT_SYMBOL(BpGetVoipLedGpio);
++EXPORT_SYMBOL(BpGetWirelessExtIntr);
++EXPORT_SYMBOL(BpGetAdslDyingGaspExtIntr);
++EXPORT_SYMBOL(BpGetVoipExtIntr);
++EXPORT_SYMBOL(BpGetHpnaExtIntr);
++EXPORT_SYMBOL(BpGetHpnaChipSelect);
++EXPORT_SYMBOL(BpGetVoipChipSelect);
++EXPORT_SYMBOL(BpGetWirelessSesBtnGpio);
++EXPORT_SYMBOL(BpGetWirelessSesExtIntr);
++EXPORT_SYMBOL(BpGetWirelessSesLedGpio);
++EXPORT_SYMBOL(kerSysRegisterDyingGaspHandler);
++EXPORT_SYMBOL(kerSysDeregisterDyingGaspHandler);
++EXPORT_SYMBOL(kerSysGetCycleCount);
++EXPORT_SYMBOL(kerSysSetWdTimer);
++EXPORT_SYMBOL(kerSysWakeupMonitorTask);
++
+diff -urN linux-2.6.8.1/bcmdrivers/opensource/char/board/bcm963xx/bcm96348/cfiflash.c linux-2.6.8.1-brcm63xx/bcmdrivers/opensource/char/board/bcm963xx/bcm96348/cfiflash.c
+--- linux-2.6.8.1/bcmdrivers/opensource/char/board/bcm963xx/bcm96348/cfiflash.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.8.1-brcm63xx/bcmdrivers/opensource/char/board/bcm963xx/bcm96348/cfiflash.c 2006-06-26 09:07:10.000000000 +0200
+@@ -0,0 +1,692 @@
++/************************************************************************/
++/* */
++/* AMD CFI Enabled Flash Memory Drivers */
++/* File name: CFIFLASH.C */
++/* Revision: 1.0 5/07/98 */
++/* */
++/* Copyright (c) 1998 ADVANCED MICRO DEVICES, INC. All Rights Reserved. */
++/* This software is unpublished and contains the trade secrets and */
++/* confidential proprietary information of AMD. Unless otherwise */
++/* provided in the Software Agreement associated herewith, it is */
++/* licensed in confidence "AS IS" and is not to be reproduced in whole */
++/* or part by any means except for backup. Use, duplication, or */
++/* disclosure by the Government is subject to the restrictions in */
++/* paragraph (b) (3) (B) of the Rights in Technical Data and Computer */
++/* Software clause in DFAR 52.227-7013 (a) (Oct 1988). */
++/* Software owned by */
++/* Advanced Micro Devices, Inc., */
++/* One AMD Place, */
++/* P.O. Box 3453 */
++/* Sunnyvale, CA 94088-3453. */
++/************************************************************************/
++/* This software constitutes a basic shell of source code for */
++/* programming all AMD Flash components. AMD */
++/* will not be responsible for misuse or illegal use of this */
++/* software for devices not supported herein. AMD is providing */
++/* this source code "AS IS" and will not be responsible for */
++/* issues arising from incorrect user implementation of the */
++/* source code herein. It is the user's responsibility to */
++/* properly design-in this source code. */
++/* */
++/************************************************************************/
++#ifdef _CFE_
++#include "lib_types.h"
++#include "lib_printf.h"
++#include "lib_string.h"
++#include "cfe_timer.h"
++#define printk printf
++#else // linux
++#include <linux/param.h>
++#include <linux/sched.h>
++#include <linux/timer.h>
++#endif
++
++#include "cfiflash.h"
++
++static int flash_wait(WORD sector, int offset, UINT16 data);
++static UINT16 flash_get_device_id(void);
++static int flash_get_cfi(struct cfi_query *query, UINT16 *cfi_struct, int flashFamily);
++static int flash_write(WORD sector, int offset, byte *buf, int nbytes);
++static void flash_command(int command, WORD sector, int offset, UINT16 data);
++
++/*********************************************************************/
++/* 'meminfo' should be a pointer, but most C compilers will not */
++/* allocate static storage for a pointer without calling */
++/* non-portable functions such as 'new'. We also want to avoid */
++/* the overhead of passing this pointer for every driver call. */
++/* Systems with limited heap space will need to do this. */
++/*********************************************************************/
++struct flashinfo meminfo; /* Flash information structure */
++static int flashFamily = FLASH_UNDEFINED;
++static int totalSize = 0;
++static struct cfi_query query;
++
++static UINT16 cfi_data_struct_29W160[] = {
++ 0x0020, 0x0049, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
++ 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
++ 0x0051, 0x0052, 0x0059, 0x0002, 0x0000, 0x0040, 0x0000, 0x0000,
++ 0x0000, 0x0000, 0x0000, 0x0027, 0x0036, 0x0000, 0x0000, 0x0004,
++ 0x0000, 0x000a, 0x0000, 0x0004, 0x0000, 0x0003, 0x0000, 0x0015,
++ 0x0002, 0x0000, 0x0000, 0x0000, 0x0004, 0x0000, 0x0000, 0x0040,
++ 0x0000, 0x0001, 0x0000, 0x0020, 0x0000, 0x0000, 0x0000, 0x0080,
++ 0x0000, 0x001e, 0x0000, 0x0000, 0x0001, 0xffff, 0xffff, 0xffff,
++ 0x0050, 0x0052, 0x0049, 0x0031, 0x0030, 0x0000, 0x0002, 0x0001,
++ 0x0001, 0x0004, 0x0000, 0x0000, 0x0000, 0xffff, 0xffff, 0x0002,
++ 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
++ 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
++ 0xffff, 0x0888, 0x252b, 0x8c84, 0x7dbc, 0xffff, 0xffff, 0xffff,
++ 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
++ 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
++ 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff
++};
++
++
++/*********************************************************************/
++/* Init_flash is used to build a sector table from the information */
++/* provided through the CFI query. This information is translated */
++/* from erase_block information to base:offset information for each */
++/* individual sector. This information is then stored in the meminfo */
++/* structure, and used throughout the driver to access sector */
++/* information. */
++/* */
++/* This is more efficient than deriving the sector base:offset */
++/* information every time the memory map switches (since on the */
++/* development platform can only map 64k at a time). If the entire */
++/* flash memory array can be mapped in, then the addition static */
++/* allocation for the meminfo structure can be eliminated, but the */
++/* drivers will have to be re-written. */
++/* */
++/* The meminfo struct occupies 653 bytes of heap space, depending */
++/* on the value of the define MAXSECTORS. Adjust to suit */
++/* application */
++/*********************************************************************/
++byte flash_init(void)
++{
++ int i=0, j=0, count=0;
++ int basecount=0L;
++ UINT16 device_id;
++ int flipCFIGeometry = FALSE;
++
++ /* First, assume
++ * a single 8k sector for sector 0. This is to allow
++ * the system to perform memory mapping to the device,
++ * even though the actual physical layout is unknown.
++ * Once mapped in, the CFI query will produce all
++ * relevant information.
++ */
++ meminfo.addr = 0L;
++ meminfo.areg = 0;
++ meminfo.nsect = 1;
++ meminfo.bank1start = 0;
++ meminfo.bank2start = 0;
++
++ meminfo.sec[0].size = 8192;
++ meminfo.sec[0].base = 0x00000;
++ meminfo.sec[0].bank = 1;
++
++ flash_command(FLASH_RESET, 0, 0, 0);
++
++ device_id = flash_get_device_id();
++
++ switch (device_id) {
++ case ID_I28F160C3B:
++ case ID_I28F320C3B:
++ case ID_I28F160C3T:
++ case ID_I28F320C3T:
++ flashFamily = FLASH_INTEL;
++ break;
++ case ID_AM29DL800B:
++ case ID_AM29LV800B:
++ case ID_AM29LV400B:
++ case ID_AM29LV160B:
++ case ID_AM29LV320B:
++ case ID_MX29LV320AB:
++ case ID_AM29LV320MB:
++ case ID_AM29DL800T:
++ case ID_AM29LV800T:
++ case ID_AM29LV160T:
++ case ID_AM29LV320T:
++ case ID_MX29LV320AT:
++ case ID_AM29LV320MT:
++ flashFamily = FLASH_AMD;
++ break;
++ case ID_SST39VF1601:
++ case ID_SST39VF3201:
++ flashFamily = FLASH_SST;
++ break;
++ default:
++ printk("Flash memory not supported! Device id = %x\n", device_id);
++ return -1;
++ }
++
++ if (flash_get_cfi(&query, 0, flashFamily) == -1) {
++ switch(device_id) {
++ case ID_AM29LV160T:
++ case ID_AM29LV160B:
++ flash_get_cfi(&query, cfi_data_struct_29W160, flashFamily);
++ break;
++ default:
++ printk("CFI data structure not found. Device id = %x\n", device_id);
++ return -1;
++ }
++ }
++
++ // need to determine if it top or bottom boot here
++ switch (device_id)
++ {
++ case ID_AM29DL800B:
++ case ID_AM29LV800B:
++ case ID_AM29LV400B:
++ case ID_AM29LV160B:
++ case ID_AM29LV320B:
++ case ID_MX29LV320AB:
++ case ID_AM29LV320MB:
++ case ID_I28F160C3B:
++ case ID_I28F320C3B:
++ case ID_I28F160C3T:
++ case ID_I28F320C3T:
++ case ID_SST39VF1601:
++ case ID_SST39VF3201:
++ flipCFIGeometry = FALSE;
++ break;
++ case ID_AM29DL800T:
++ case ID_AM29LV800T:
++ case ID_AM29LV160T:
++ case ID_AM29LV320T:
++ case ID_MX29LV320AT:
++ case ID_AM29LV320MT:
++ flipCFIGeometry = TRUE;
++ break;
++ default:
++ printk("Flash memory not supported! Device id = %x\n", device_id);
++ return -1;
++ }
++
++ count=0;basecount=0L;
++
++ if (!flipCFIGeometry)
++ {
++ for (i=0; i<query.num_erase_blocks; i++) {
++ for(j=0; j<query.erase_block[i].num_sectors; j++) {
++ meminfo.sec[count].size = (int) query.erase_block[i].sector_size;
++ meminfo.sec[count].base = (int) basecount;
++ basecount += (int) query.erase_block[i].sector_size;
++ count++;
++ }
++ }
++ }
++ else
++ {
++ for (i = (query.num_erase_blocks - 1); i >= 0; i--) {
++ for(j=0; j<query.erase_block[i].num_sectors; j++) {
++ meminfo.sec[count].size = (int) query.erase_block[i].sector_size;
++ meminfo.sec[count].base = (int) basecount;
++ basecount += (int) query.erase_block[i].sector_size;
++ count++;
++ }
++ }
++ }
++
++ meminfo.nsect = count;
++ totalSize = meminfo.sec[count-1].base + meminfo.sec[count-1].size;
++ return (0);
++}
++
++/*********************************************************************/
++/* Flash_sector_erase_int() is identical to flash_sector_erase(), */
++/* except it will wait until the erase is completed before returning */
++/* control to the calling function. This can be used in cases which */
++/* require the program to hold until a sector is erased, without */
++/* adding the wait check external to this function. */
++/*********************************************************************/
++byte flash_sector_erase_int(WORD sector)
++{
++ int i;
++
++ for( i = 0; i < 3; i++ ) {
++ flash_command(FLASH_SERASE, sector, 0, 0);
++ if (flash_wait(sector, 0, 0xffff) == STATUS_READY)
++ break;
++ }
++
++ return(1);
++}
++
++/*********************************************************************/
++/* flash_read_buf() reads buffer of data from the specified */
++/* offset from the sector parameter. */
++/*********************************************************************/
++int flash_read_buf(WORD sector, int offset,
++ byte *buffer, int numbytes)
++{
++ byte *fwp;
++
++ fwp = (byte *)flash_get_memptr(sector);
++
++ while (numbytes) {
++ *buffer++ = *(fwp + offset);
++ numbytes--;
++ fwp++;
++ }
++
++ return (1);
++}
++
++/*********************************************************************/
++/* flash_write_buf() utilizes */
++/* the unlock bypass mode of the flash device. This can remove */
++/* significant overhead from the bulk programming operation, and */
++/* when programming bulk data a sizeable performance increase can be */
++/* observed. */
++/*********************************************************************/
++int flash_write_buf(WORD sector, int offset, byte *buffer, int numbytes)
++{
++ int ret = -1;
++ int i;
++ unsigned char *p = flash_get_memptr(sector) + offset;
++
++ /* After writing the flash block, compare the contents to the source
++ * buffer. Try to write the sector successfully up to three times.
++ */
++ for( i = 0; i < 3; i++ ) {
++ ret = flash_write(sector, offset, buffer, numbytes);
++ if( !memcmp( p, buffer, numbytes ) )
++ break;
++ /* Erase and try again */
++ flash_sector_erase_int(sector);
++ ret = -1;
++ }
++
++ if( ret == -1 )
++ printk( "Flash write error. Verify failed\n" );
++
++ return( ret );
++}
++
++/*********************************************************************/
++/* Usefull funtion to return the number of sectors in the device. */
++/* Can be used for functions which need to loop among all the */
++/* sectors, or wish to know the number of the last sector. */
++/*********************************************************************/
++int flash_get_numsectors(void)
++{
++ return meminfo.nsect;
++}
++
++/*********************************************************************/
++/* flash_get_sector_size() is provided for cases in which the size */
++/* of a sector is required by a host application. The sector size */
++/* (in bytes) is returned in the data location pointed to by the */
++/* 'size' parameter. */
++/*********************************************************************/
++int flash_get_sector_size(WORD sector)
++{
++ return meminfo.sec[sector].size;
++}
++
++/*********************************************************************/
++/* The purpose of flash_get_memptr() is to return a memory pointer */
++/* which points to the beginning of memory space allocated for the */
++/* flash. All function pointers are then referenced from this */
++/* pointer. */
++/* */
++/* Different systems will implement this in different ways: */
++/* possibilities include: */
++/* - A direct memory pointer */
++/* - A pointer to a memory map */
++/* - A pointer to a hardware port from which the linear */
++/* address is translated */
++/* - Output of an MMU function / service */
++/* */
++/* Also note that this function expects the pointer to a specific */
++/* sector of the device. This can be provided by dereferencing */
++/* the pointer from a translated offset of the sector from a */
++/* global base pointer (e.g. flashptr = base_pointer + sector_offset)*/
++/* */
++/* Important: Many AMD flash devices need both bank and or sector */
++/* address bits to be correctly set (bank address bits are A18-A16, */
++/* and sector address bits are A18-A12, or A12-A15). Flash parts */
++/* which do not need these bits will ignore them, so it is safe to */
++/* assume that every part will require these bits to be set. */
++/*********************************************************************/
++unsigned char *flash_get_memptr(WORD sector)
++{
++ unsigned char *memptr = (unsigned char*)(FLASH_BASE_ADDR_REG + meminfo.sec[sector].base);
++
++ return (memptr);
++}
++
++/*********************************************************************/
++/* The purpose of flash_get_blk() is to return a the block number */
++/* for a given memory address. */
++/*********************************************************************/
++int flash_get_blk(int addr)
++{
++ int blk_start, i;
++ int last_blk = flash_get_numsectors();
++ int relative_addr = addr - (int) FLASH_BASE_ADDR_REG;
++
++ for(blk_start=0, i=0; i < relative_addr && blk_start < last_blk; blk_start++)
++ i += flash_get_sector_size(blk_start);
++
++ if( i > relative_addr )
++ {
++ blk_start--; // last blk, dec by 1
++ }
++ else
++ if( blk_start == last_blk )
++ {
++ printk("Address is too big.\n");
++ blk_start = -1;
++ }
++
++ return( blk_start );
++}
++
++/************************************************************************/
++/* The purpose of flash_get_total_size() is to return the total size of */
++/* the flash */
++/************************************************************************/
++int flash_get_total_size()
++{
++ return totalSize;
++}
++
++/*********************************************************************/
++/* Flash_command() is the main driver function. It performs */
++/* every possible command available to AMD B revision */
++/* flash parts. Note that this command is not used directly, but */
++/* rather called through the API wrapper functions provided below. */
++/*********************************************************************/
++static void flash_command(int command, WORD sector, int offset, UINT16 data)
++{
++ volatile UINT16 *flashptr;
++ volatile UINT16 *flashbase;
++
++ flashptr = (UINT16 *) flash_get_memptr(sector);
++ flashbase = (UINT16 *) flash_get_memptr(0);
++
++ switch (flashFamily) {
++ case FLASH_UNDEFINED:
++ /* These commands should work for AMD, Intel and SST flashes */
++ switch (command) {
++ case FLASH_RESET:
++ flashptr[0] = 0xF0;
++ flashptr[0] = 0xFF;
++ break;
++ case FLASH_READ_ID:
++ flashptr[0x5555] = 0xAA; /* unlock 1 */
++ flashptr[0x2AAA] = 0x55; /* unlock 2 */
++ flashptr[0x5555] = 0x90;
++ break;
++ default:
++ break;
++ }
++ break;
++ case FLASH_AMD:
++ switch (command) {
++ case FLASH_RESET:
++ flashptr[0] = 0xF0;
++ break;
++ case FLASH_READ_ID:
++ flashptr[0x555] = 0xAA; /* unlock 1 */
++ flashptr[0x2AA] = 0x55; /* unlock 2 */
++ flashptr[0x555] = 0x90;
++ break;
++ case FLASH_CFIQUERY:
++ flashptr[0x55] = 0x98;
++ break;
++ case FLASH_UB:
++ flashptr[0x555] = 0xAA; /* unlock 1 */
++ flashptr[0x2AA] = 0x55; /* unlock 2 */
++ flashptr[0x555] = 0x20;
++ break;
++ case FLASH_PROG:
++ flashptr[0] = 0xA0;
++ flashptr[offset/2] = data;
++ break;
++ case FLASH_UBRESET:
++ flashptr[0] = 0x90;
++ flashptr[0] = 0x00;
++ break;
++ case FLASH_SERASE:
++ flashptr[0x555] = 0xAA; /* unlock 1 */
++ flashptr[0x2AA] = 0x55; /* unlock 2 */
++ flashptr[0x555] = 0x80;
++ flashptr[0x555] = 0xAA;
++ flashptr[0x2AA] = 0x55;
++ flashptr[0] = 0x30;
++ break;
++ default:
++ break;
++ }
++ break;
++ case FLASH_INTEL:
++ switch (command) {
++ case FLASH_RESET:
++ flashptr[0] = 0xFF;
++ break;
++ case FLASH_READ_ID:
++ flashptr[0] = 0x90;
++ break;
++ case FLASH_CFIQUERY:
++ flashptr[0] = 0x98;
++ break;
++ case FLASH_PROG:
++ flashptr[0] = 0x40;
++ flashptr[offset/2] = data;
++ break;
++ case FLASH_SERASE:
++ flashptr[0] = 0x60;
++ flashptr[0] = 0xD0;
++ flashptr[0] = 0x20;
++ flashptr[0] = 0xD0;
++ break;
++ default:
++ break;
++ }
++ break;
++ case FLASH_SST:
++ switch (command) {
++ case FLASH_RESET:
++ flashbase[0x5555] = 0xAA; /* unlock 1 */
++ flashbase[0x2AAA] = 0x55; /* unlock 2 */
++ flashbase[0x5555] = 0xf0;
++ break;
++ case FLASH_READ_ID:
++ flashbase[0x5555] = 0xAA; /* unlock 1 */
++ flashbase[0x2AAA] = 0x55; /* unlock 2 */
++ flashbase[0x5555] = 0x90;
++ break;
++ case FLASH_CFIQUERY:
++ flashbase[0x5555] = 0xAA; /* unlock 1 */
++ flashbase[0x2AAA] = 0x55; /* unlock 2 */
++ flashbase[0x5555] = 0x98;
++ break;
++ case FLASH_UB:
++ break;
++ case FLASH_PROG:
++ flashbase[0x5555] = 0xAA; /* unlock 1 */
++ flashbase[0x2AAA] = 0x55; /* unlock 2 */
++ flashbase[0x5555] = 0xa0;
++ flashptr[offset/2] = data;
++ break;
++ case FLASH_UBRESET:
++ break;
++ case FLASH_SERASE:
++ flashbase[0x5555] = 0xAA; /* unlock 1 */
++ flashbase[0x2AAA] = 0x55; /* unlock 2 */
++ flashbase[0x5555] = 0x80;
++ flashbase[0x5555] = 0xAA;
++ flashbase[0x2AAA] = 0x55;
++ flashptr[0] = 0x30;
++ break;
++ default:
++ break;
++ }
++ break;
++ default:
++ break;
++ }
++}
++
++/*********************************************************************/
++/* flash_write extends the functionality of flash_program() by */
++/* providing an faster way to program multiple data words, without */
++/* needing the function overhead of looping algorithms which */
++/* program word by word. This function utilizes fast pointers */
++/* to quickly loop through bulk data. */
++/*********************************************************************/
++static int flash_write(WORD sector, int offset, byte *buf, int nbytes)
++{
++ UINT16 *src;
++ src = (UINT16 *)buf;
++
++ if ((nbytes | offset) & 1) {
++ return -1;
++ }
++
++ flash_command(FLASH_UB, 0, 0, 0);
++ while (nbytes > 0) {
++ flash_command(FLASH_PROG, sector, offset, *src);
++ if (flash_wait(sector, offset, *src) != STATUS_READY)
++ break;
++ offset +=2;
++ nbytes -=2;
++ src++;
++ }
++ flash_command(FLASH_UBRESET, 0, 0, 0);
++
++ return (byte*)src - buf;
++}
++
++/*********************************************************************/
++/* flash_wait utilizes the DQ6, DQ5, and DQ2 polling algorithms */
++/* described in the flash data book. It can quickly ascertain the */
++/* operational status of the flash device, and return an */
++/* appropriate status code (defined in flash.h) */
++/*********************************************************************/
++static int flash_wait(WORD sector, int offset, UINT16 data)
++{
++ volatile UINT16 *flashptr; /* flash window */
++ UINT16 d1;
++
++ flashptr = (UINT16 *) flash_get_memptr(sector);
++
++ if (flashFamily == FLASH_AMD || flashFamily == FLASH_SST) {
++#if defined(_BCM96338_) || defined(CONFIG_BCM96338)
++ do {
++ d1 = flashptr[offset/2];
++ if (d1 == data)
++ return STATUS_READY;
++ } while (!(d1 & 0x20));
++
++ d1 = flashptr[offset/2];
++
++ if (d1 != data) {
++ flash_command(FLASH_RESET, 0, 0, 0);
++ return STATUS_TIMEOUT;
++ }
++#else
++ do {
++ d1 = *flashptr; /* read data */
++ d1 ^= *flashptr; /* read it again and see what toggled */
++ if (d1 == 0) /* no toggles, nothing's happening */
++ return STATUS_READY;
++ } while (!(d1 & 0x20));
++
++ d1 = *flashptr; /* read data */
++ d1 ^= *flashptr; /* read it again and see what toggled */
++
++ if (d1 != 0) {
++ flash_command(FLASH_RESET, 0, 0, 0);
++ return STATUS_TIMEOUT;
++ }
++#endif
++ } else if (flashFamily == FLASH_INTEL) {
++ flashptr[0] = 0x70;
++ /* Wait for completion */
++ while(!(*flashptr & 0x80));
++ if (*flashptr & 0x30) {
++ flashptr[0] = 0x50;
++ flash_command(FLASH_RESET, 0, 0, 0);
++ return STATUS_TIMEOUT;
++ }
++ flashptr[0] = 0x50;
++ flash_command(FLASH_RESET, 0, 0, 0);
++ }
++
++ return STATUS_READY;
++}
++
++/*********************************************************************/
++/* flash_get_device_id() will perform an autoselect sequence on the */
++/* flash device, and return the device id of the component. */
++/* This function automatically resets to read mode. */
++/*********************************************************************/
++static UINT16 flash_get_device_id()
++{
++ volatile UINT16 *fwp; /* flash window */
++ UINT16 answer;
++
++ fwp = (UINT16 *)flash_get_memptr(0);
++
++ flash_command(FLASH_READ_ID, 0, 0, 0);
++ answer = *(fwp + 1);
++ if (answer == ID_AM29LV320M) {
++ answer = *(fwp + 0xe);
++ answer = *(fwp + 0xf);
++ }
++
++ flash_command(FLASH_RESET, 0, 0, 0);
++ return( (UINT16) answer );
++}
++
++/*********************************************************************/
++/* flash_get_cfi() is the main CFI workhorse function. Due to it's */
++/* complexity and size it need only be called once upon */
++/* initializing the flash system. Once it is called, all operations */
++/* are performed by looking at the meminfo structure. */
++/* All possible care was made to make this algorithm as efficient as */
++/* possible. 90% of all operations are memory reads, and all */
++/* calculations are done using bit-shifts when possible */
++/*********************************************************************/
++static int flash_get_cfi(struct cfi_query *query, UINT16 *cfi_struct, int flashFamily)
++{
++ volatile UINT16 *fwp; /* flash window */
++ int i=0;
++
++ flash_command(FLASH_CFIQUERY, 0, 0, 0);
++
++ if (cfi_struct == 0)
++ fwp = (UINT16 *)flash_get_memptr(0);
++ else
++ fwp = cfi_struct;
++
++ /* Initial house-cleaning */
++ for(i=0; i < 8; i++) {
++ query->erase_block[i].sector_size = 0;
++ query->erase_block[i].num_sectors = 0;
++ }
++
++ /* If not 'QRY', then we dont have a CFI enabled device in the socket */
++ if( fwp[0x10] != 'Q' &&
++ fwp[0x11] != 'R' &&
++ fwp[0x12] != 'Y') {
++ flash_command(FLASH_RESET, 0, 0, 0);
++ return(-1);
++ }
++
++ query->num_erase_blocks = fwp[0x2C];
++ if(flashFamily == FLASH_SST)
++ query->num_erase_blocks = 1;
++
++ for(i=0; i < query->num_erase_blocks; i++) {
++ query->erase_block[i].num_sectors = fwp[(0x2D+(4*i))] + (fwp[0x2E + (4*i)] << 8);
++ query->erase_block[i].num_sectors++;
++ query->erase_block[i].sector_size = 256 * (256 * fwp[(0x30+(4*i))] + fwp[(0x2F+(4*i))]);
++ }
++
++ flash_command(FLASH_RESET, 0, 0, 0);
++ return(1);
++}
+diff -urN linux-2.6.8.1/bcmdrivers/opensource/char/board/bcm963xx/bcm96348/cfiflash.h linux-2.6.8.1-brcm63xx/bcmdrivers/opensource/char/board/bcm963xx/bcm96348/cfiflash.h
+--- linux-2.6.8.1/bcmdrivers/opensource/char/board/bcm963xx/bcm96348/cfiflash.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.8.1-brcm63xx/bcmdrivers/opensource/char/board/bcm963xx/bcm96348/cfiflash.h 2006-06-26 09:07:10.000000000 +0200
+@@ -0,0 +1,150 @@
++/************************************************************************/
++/* */
++/* AMD CFI Enabled Flash Memory Drivers */
++/* File name: CFIFLASH.H */
++/* Revision: 1.0 5/07/98 */
++/* */
++/* Copyright (c) 1998 ADVANCED MICRO DEVICES, INC. All Rights Reserved. */
++/* This software is unpublished and contains the trade secrets and */
++/* confidential proprietary information of AMD. Unless otherwise */
++/* provided in the Software Agreement associated herewith, it is */
++/* licensed in confidence "AS IS" and is not to be reproduced in whole */
++/* or part by any means except for backup. Use, duplication, or */
++/* disclosure by the Government is subject to the restrictions in */
++/* paragraph (b) (3) (B) of the Rights in Technical Data and Computer */
++/* Software clause in DFAR 52.227-7013 (a) (Oct 1988). */
++/* Software owned by */
++/* Advanced Micro Devices, Inc., */
++/* One AMD Place, */
++/* P.O. Box 3453 */
++/* Sunnyvale, CA 94088-3453. */
++/************************************************************************/
++/* This software constitutes a basic shell of source code for */
++/* programming all AMD Flash components. AMD */
++/* will not be responsible for misuse or illegal use of this */
++/* software for devices not supported herein. AMD is providing */
++/* this source code "AS IS" and will not be responsible for */
++/* issues arising from incorrect user implementation of the */
++/* source code herein. It is the user's responsibility to */
++/* properly design-in this source code. */
++/* */
++/************************************************************************/
++#ifndef _CFIFLASH_H
++#define _CFIFLASH_H
++
++#if defined __cplusplus
++extern "C" {
++#endif
++
++/* include board/CPU specific definitions */
++#include "bcmtypes.h"
++#include "board.h"
++
++#define FLASH_BASE_ADDR_REG FLASH_BASE
++
++#ifndef NULL
++#define NULL 0
++#endif
++
++#define MAXSECTORS 1024 /* maximum number of sectors supported */
++
++/* A structure for identifying a flash part. There is one for each
++ * of the flash part definitions. We need to keep track of the
++ * sector organization, the address register used, and the size
++ * of the sectors.
++ */
++struct flashinfo {
++ char *name; /* "Am29DL800T", etc. */
++ unsigned long addr; /* physical address, once translated */
++ int areg; /* Can be set to zero for all parts */
++ int nsect; /* # of sectors -- 19 in LV, 22 in DL */
++ int bank1start; /* first sector # in bank 1 */
++ int bank2start; /* first sector # in bank 2, if DL part */
++ struct {
++ long size; /* # of bytes in this sector */
++ long base; /* offset from beginning of device */
++ int bank; /* 1 or 2 for DL; 1 for LV */
++ } sec[MAXSECTORS]; /* per-sector info */
++};
++
++/*
++ * This structure holds all CFI query information as defined
++ * in the JEDEC standard. All information up to
++ * primary_extended_query is standard among all manufactures
++ * with CFI enabled devices.
++ */
++
++struct cfi_query {
++ int num_erase_blocks; /* Number of sector defs. */
++ struct {
++ unsigned long sector_size; /* byte size of sector */
++ int num_sectors; /* Num sectors of this size */
++ } erase_block[8]; /* Max of 256, but 8 is good */
++};
++
++/* Standard Boolean declarations */
++#define TRUE 1
++#define FALSE 0
++
++/* Define different type of flash */
++#define FLASH_UNDEFINED 0
++#define FLASH_AMD 1
++#define FLASH_INTEL 2
++#define FLASH_SST 3
++
++/* Command codes for the flash_command routine */
++#define FLASH_RESET 0 /* reset to read mode */
++#define FLASH_READ_ID 1 /* read device ID */
++#define FLASH_CFIQUERY 2 /* CFI query */
++#define FLASH_UB 3 /* go into unlock bypass mode */
++#define FLASH_PROG 4 /* program a word */
++#define FLASH_UBRESET 5 /* reset to read mode from unlock bypass mode */
++#define FLASH_SERASE 6 /* sector erase */
++
++/* Return codes from flash_status */
++#define STATUS_READY 0 /* ready for action */
++#define STATUS_TIMEOUT 1 /* operation timed out */
++
++/* A list of AMD compatible device ID's - add others as needed */
++#define ID_AM29DL800T 0x224A
++#define ID_AM29DL800B 0x22CB
++#define ID_AM29LV800T 0x22DA
++#define ID_AM29LV800B 0x225B
++#define ID_AM29LV400B 0x22BA
++
++#define ID_AM29LV160B 0x2249
++#define ID_AM29LV160T 0x22C4
++
++#define ID_AM29LV320T 0x22F6
++#define ID_MX29LV320AT 0x22A7
++#define ID_AM29LV320B 0x22F9
++#define ID_MX29LV320AB 0x22A8
++
++#define ID_AM29LV320M 0x227E
++#define ID_AM29LV320MB 0x2200
++#define ID_AM29LV320MT 0x2201
++
++#define ID_SST39VF1601 0x234B
++#define ID_SST39VF3201 0x235B
++
++/* A list of Intel compatible device ID's - add others as needed */
++#define ID_I28F160C3T 0x88C2
++#define ID_I28F160C3B 0x88C3
++#define ID_I28F320C3T 0x88C4
++#define ID_I28F320C3B 0x88C5
++
++extern byte flash_init(void);
++extern int flash_write_buf(WORD sector, int offset, byte *buffer, int numbytes);
++extern int flash_read_buf(WORD sector, int offset, byte *buffer, int numbytes);
++extern byte flash_sector_erase_int(WORD sector);
++extern int flash_get_numsectors(void);
++extern int flash_get_sector_size(WORD sector);
++extern int flash_get_total_size(void);
++extern unsigned char *flash_get_memptr(WORD sector);
++extern int flash_get_blk(int addr);
++
++#if defined __cplusplus
++}
++#endif
++
++#endif
+diff -urN linux-2.6.8.1/bcmdrivers/opensource/char/board/bcm963xx/impl1/Makefile linux-2.6.8.1-brcm63xx/bcmdrivers/opensource/char/board/bcm963xx/impl1/Makefile
+--- linux-2.6.8.1/bcmdrivers/opensource/char/board/bcm963xx/impl1/Makefile 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.8.1-brcm63xx/bcmdrivers/opensource/char/board/bcm963xx/impl1/Makefile 2006-06-26 09:07:10.000000000 +0200
+@@ -0,0 +1,17 @@
++# Makefile for the bcm963xx board drivers
++#
++
++
++obj-y := board.o cfiflash.o bcm63xx_flash.o bcm63xx_led.o
++
++EXTRA_CFLAGS += -I. -I$(INC_BRCMBOARDPARMS_PATH)/$(BRCM_BOARD) -I$(INC_BRCMDRIVER_PUB_PATH)/$(BRCM_BOARD)
++
++ifeq ($(strip $(WIRELESS)),1)
++ EXTRA_CFLAGS += -DWIRELESS
++endif
++
++-include $(TOPDIR)/Rules.make
++
++clean:
++ rm -f core *.o *.a *.s
++
+diff -urN linux-2.6.8.1/bcmdrivers/opensource/char/board/bcm963xx/impl1/bcm63xx_flash.c linux-2.6.8.1-brcm63xx/bcmdrivers/opensource/char/board/bcm963xx/impl1/bcm63xx_flash.c
+--- linux-2.6.8.1/bcmdrivers/opensource/char/board/bcm963xx/impl1/bcm63xx_flash.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.8.1-brcm63xx/bcmdrivers/opensource/char/board/bcm963xx/impl1/bcm63xx_flash.c 2006-06-26 09:07:10.000000000 +0200
+@@ -0,0 +1,775 @@
++/*
++<:copyright-gpl
++ Copyright 2002 Broadcom Corp. All Rights Reserved.
++
++ This program is free software; you can distribute it and/or modify it
++ under the terms of the GNU General Public License (Version 2) as
++ published by the Free Software Foundation.
++
++ This program is distributed in the hope it will be useful, but WITHOUT
++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
++ for more details.
++
++ You should have received a copy of the GNU General Public License along
++ with this program; if not, write to the Free Software Foundation, Inc.,
++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
++:>
++*/
++/*
++ ***************************************************************************
++ * File Name : bcm63xx_flash.c
++ *
++ * Description: This file contains the flash device driver APIs for bcm63xx board.
++ *
++ * Created on : 8/10/2002 seanl: use cfiflash.c, cfliflash.h (AMD specific)
++ *
++ ***************************************************************************/
++
++
++/* Includes. */
++#include <linux/fs.h>
++#include <linux/capability.h>
++#include <linux/slab.h>
++#include <linux/errno.h>
++#include <linux/module.h>
++#include <asm/uaccess.h>
++
++#include <bcm_map_part.h>
++#include <board.h>
++#define BCMTAG_EXE_USE
++#include <bcmTag.h>
++#include "cfiflash.h"
++#include "boardparms.h"
++
++//#define DEBUG_FLASH
++
++static FLASH_ADDR_INFO fInfo;
++static int flashInitialized = 0;
++
++void *retriedKmalloc(size_t size)
++{
++ void *pBuf;
++ int tryCount = 0;
++
++ // try 1000 times before quit
++ while (((pBuf = kmalloc(size, GFP_KERNEL)) == NULL) && (tryCount++ < 1000))
++ {
++ current->state = TASK_INTERRUPTIBLE;
++ schedule_timeout(HZ/10);
++ }
++ if (tryCount >= 1000)
++ pBuf = NULL;
++ else
++ memset(pBuf, 0, size);
++
++ return pBuf;
++}
++
++void retriedKfree(void *pBuf)
++{
++ kfree(pBuf);
++}
++
++/***************************************************************************
++// Function Name: getCrc32
++// Description : caculate the CRC 32 of the given data.
++// Parameters : pdata - array of data.
++// size - number of input data bytes.
++// crc - either CRC32_INIT_VALUE or previous return value.
++// Returns : crc.
++****************************************************************************/
++UINT32 getCrc32(byte *pdata, UINT32 size, UINT32 crc)
++{
++ while (size-- > 0)
++ crc = (crc >> 8) ^ Crc32_table[(crc ^ *pdata++) & 0xff];
++
++ return crc;
++}
++
++// get the nvram start addr
++//
++unsigned long get_nvram_start_addr(void)
++{
++ return ((unsigned long)
++ (flash_get_memptr(fInfo.flash_nvram_start_blk) + fInfo.flash_nvram_blk_offset));
++}
++
++// get the scratch_pad start addr
++//
++unsigned long get_scratch_pad_start_addr(void)
++{
++ return ((unsigned long)
++ (flash_get_memptr(fInfo.flash_scratch_pad_start_blk) + fInfo.flash_scratch_pad_blk_offset));
++}
++
++
++
++/* *********************************************************************
++ * kerSysImageTagGet()
++ * Get the image tag
++ * Input parameters:
++ * none
++ * Return value:
++ * point to tag -- Found
++ * NULL -- failed
++ ********************************************************************* */
++PFILE_TAG kerSysImageTagGet(void)
++{
++ int i;
++ int totalBlks = flash_get_numsectors();
++ UINT32 crc;
++ unsigned char *sectAddr;
++ PFILE_TAG pTag;
++
++#if defined(DEBUG_FLASH)
++ printk("totalblks in tagGet=%d\n", totalBlks);
++#endif
++
++ // start from 2nd blk, assume 1st one is always CFE
++ for (i = 1; i < totalBlks; i++)
++ {
++ sectAddr = flash_get_memptr((byte) i);
++ crc = CRC32_INIT_VALUE;
++ crc = getCrc32(sectAddr, (UINT32)TAG_LEN-TOKEN_LEN, crc);
++ pTag = (PFILE_TAG) sectAddr;
++
++#if defined(DEBUG_FLASH)
++ printk("Check Tag crc on blk [%d]\n", i);
++#endif
++
++ if (crc == (UINT32)(*(UINT32*)(pTag->tagValidationToken)))
++ return pTag;
++ }
++
++ return (PFILE_TAG) NULL;
++}
++
++// Initialize the flash and fill out the fInfo structure
++void kerSysFlashInit( void )
++{
++ int i = 0;
++ int totalBlks = 0;
++ int totalSize = 0;
++ int startAddr = 0;
++ int usedBlkSize = 0;
++ NVRAM_DATA nvramData;
++ UINT32 crc = CRC32_INIT_VALUE, savedCrc;
++ PFILE_TAG pTag = NULL;
++ unsigned long kernelEndAddr = 0;
++ unsigned long spAddr = 0;
++
++ if (flashInitialized)
++ return;
++
++ flashInitialized = 1;
++ flash_init();
++
++ totalBlks = flash_get_numsectors();
++ totalSize = flash_get_total_size();
++
++ printk("Total Flash size: %dK with %d sectors\n", totalSize/1024, totalBlks);
++
++ /* nvram is always at the end of flash */
++ fInfo.flash_nvram_length = FLASH45_LENGTH_NVRAM;
++ fInfo.flash_nvram_start_blk = 0; /* always the first block */
++ fInfo.flash_nvram_number_blk = 1; /*always fits in the first block */
++ fInfo.flash_nvram_blk_offset = NVRAM_DATA_OFFSET;
++
++ // check nvram CRC
++ memcpy((char *)&nvramData, (char *)get_nvram_start_addr(), sizeof(NVRAM_DATA));
++ savedCrc = nvramData.ulCheckSum;
++ nvramData.ulCheckSum = 0;
++ crc = getCrc32((char *)&nvramData, (UINT32) sizeof(NVRAM_DATA), crc);
++
++ BpSetBoardId( nvramData.szBoardId );
++
++ fInfo.flash_persistent_length = NVRAM_PSI_DEFAULT;
++ if (savedCrc != crc)
++ {
++ printk("***Board is not initialized****: Using the default PSI size: %d\n",
++ fInfo.flash_persistent_length);
++ }
++ else
++ {
++ unsigned long ulPsiSize;
++ if( BpGetPsiSize( &ulPsiSize ) == BP_SUCCESS )
++ fInfo.flash_persistent_length = ulPsiSize;
++ else
++ {
++ printk("***Board id is not set****: Using the default PSI size: %d\n",
++ fInfo.flash_persistent_length);
++ }
++ }
++
++ fInfo.flash_persistent_length *= ONEK;
++ startAddr = totalSize - fInfo.flash_persistent_length;
++ fInfo.flash_persistent_start_blk = flash_get_blk(startAddr+FLASH_BASE_ADDR_REG);
++ fInfo.flash_persistent_number_blk = totalBlks - fInfo.flash_persistent_start_blk;
++ // save abs SP address (Scratch Pad). it is before PSI
++ spAddr = startAddr - SP_MAX_LEN ;
++ // find out the offset in the start_blk
++ usedBlkSize = 0;
++ for (i = fInfo.flash_persistent_start_blk;
++ i < (fInfo.flash_persistent_start_blk + fInfo.flash_persistent_number_blk); i++)
++ {
++ usedBlkSize += flash_get_sector_size((byte) i);
++ }
++ fInfo.flash_persistent_blk_offset = usedBlkSize - fInfo.flash_persistent_length;
++
++ // get the info for sp
++ if (!(pTag = kerSysImageTagGet()))
++ {
++ printk("Failed to read image tag from flash\n");
++ return;
++ }
++ kernelEndAddr = (unsigned long) simple_strtoul(pTag->kernelAddress, NULL, 10) + \
++ (unsigned long) simple_strtoul(pTag->kernelLen, NULL, 10);
++
++ // make suer sp does not share kernel block
++ fInfo.flash_scratch_pad_start_blk = flash_get_blk(spAddr+FLASH_BASE_ADDR_REG);
++ if (fInfo.flash_scratch_pad_start_blk != flash_get_blk(kernelEndAddr))
++ {
++ fInfo.flash_scratch_pad_length = SP_MAX_LEN;
++ if (fInfo.flash_persistent_start_blk == fInfo.flash_scratch_pad_start_blk) // share blk
++ {
++#if 1 /* do not used scratch pad unless it's in its own sector */
++ printk("Scratch pad is not used for this flash part.\n");
++ fInfo.flash_scratch_pad_length = 0; // no sp
++#else /* allow scratch pad to share a sector with another section such as PSI */
++ fInfo.flash_scratch_pad_number_blk = 1;
++ fInfo.flash_scratch_pad_blk_offset = fInfo.flash_persistent_blk_offset - fInfo.flash_scratch_pad_length;
++#endif
++ }
++ else // on different blk
++ {
++ fInfo.flash_scratch_pad_number_blk = fInfo.flash_persistent_start_blk\
++ - fInfo.flash_scratch_pad_start_blk;
++ // find out the offset in the start_blk
++ usedBlkSize = 0;
++ for (i = fInfo.flash_scratch_pad_start_blk;
++ i < (fInfo.flash_scratch_pad_start_blk + fInfo.flash_scratch_pad_number_blk); i++)
++ usedBlkSize += flash_get_sector_size((byte) i);
++ fInfo.flash_scratch_pad_blk_offset = usedBlkSize - fInfo.flash_scratch_pad_length;
++ }
++ }
++ else
++ {
++ printk("No flash for scratch pad!\n");
++ fInfo.flash_scratch_pad_length = 0; // no sp
++ }
++
++#if defined(DEBUG_FLASH)
++ printk("fInfo.flash_scratch_pad_start_blk = %d\n", fInfo.flash_scratch_pad_start_blk);
++ printk("fInfo.flash_scratch_pad_number_blk = %d\n", fInfo.flash_scratch_pad_number_blk);
++ printk("fInfo.flash_scratch_pad_length = 0x%x\n", fInfo.flash_scratch_pad_length);
++ printk("fInfo.flash_scratch_pad_blk_offset = 0x%x\n", (unsigned int)fInfo.flash_scratch_pad_blk_offset);
++
++ printk("fInfo.flash_nvram_start_blk = %d\n", fInfo.flash_nvram_start_blk);
++ printk("fInfo.flash_nvram_blk_offset = 0x%x\n", (unsigned int)fInfo.flash_nvram_blk_offset);
++ printk("fInfo.flash_nvram_number_blk = %d\n", fInfo.flash_nvram_number_blk);
++
++ printk("psi startAddr = %x\n", startAddr+FLASH_BASE_ADDR_REG);
++ printk("fInfo.flash_persistent_start_blk = %d\n", fInfo.flash_persistent_start_blk);
++ printk("fInfo.flash_persistent_blk_offset = 0x%x\n", (unsigned int)fInfo.flash_persistent_blk_offset);
++ printk("fInfo.flash_persistent_number_blk = %d\n", fInfo.flash_persistent_number_blk);
++#endif
++
++}
++
++
++
++/***********************************************************************
++ * Function Name: kerSysFlashAddrInfoGet
++ * Description : Fills in a structure with information about the NVRAM
++ * and persistent storage sections of flash memory.
++ * Fro physmap.c to mount the fs vol.
++ * Returns : None.
++ ***********************************************************************/
++void kerSysFlashAddrInfoGet(PFLASH_ADDR_INFO pflash_addr_info)
++{
++ pflash_addr_info->flash_nvram_blk_offset = fInfo.flash_nvram_blk_offset;
++ pflash_addr_info->flash_nvram_length = fInfo.flash_nvram_length;
++ pflash_addr_info->flash_nvram_number_blk = fInfo.flash_nvram_number_blk;
++ pflash_addr_info->flash_nvram_start_blk = fInfo.flash_nvram_start_blk;
++ pflash_addr_info->flash_persistent_blk_offset = fInfo.flash_persistent_blk_offset;
++ pflash_addr_info->flash_persistent_length = fInfo.flash_persistent_length;
++ pflash_addr_info->flash_persistent_number_blk = fInfo.flash_persistent_number_blk;
++ pflash_addr_info->flash_persistent_start_blk = fInfo.flash_persistent_start_blk;
++}
++
++
++// get shared blks into *** pTempBuf *** which has to be released bye the caller!
++// return: if pTempBuf != NULL, poits to the data with the dataSize of the buffer
++// !NULL -- ok
++// NULL -- fail
++static char *getSharedBlks(int start_blk, int end_blk)
++{
++ int i = 0;
++ int usedBlkSize = 0;
++ int sect_size = 0;
++ char *pTempBuf = NULL;
++ char *pBuf = NULL;
++
++ for (i = start_blk; i < end_blk; i++)
++ usedBlkSize += flash_get_sector_size((byte) i);
++
++#if defined(DEBUG_FLASH)
++ printk("usedBlkSize = %d\n", usedBlkSize);
++#endif
++
++ if ((pTempBuf = (char *) retriedKmalloc(usedBlkSize)) == NULL)
++ {
++ printk("failed to allocate memory with size: %d\n", usedBlkSize);
++ return pTempBuf;
++ }
++
++ pBuf = pTempBuf;
++ for (i = start_blk; i < end_blk; i++)
++ {
++ sect_size = flash_get_sector_size((byte) i);
++
++#if defined(DEBUG_FLASH)
++ printk("i = %d, sect_size = %d, end_blk = %d\n", i, sect_size, end_blk);
++#endif
++ flash_read_buf((byte)i, 0, pBuf, sect_size);
++ pBuf += sect_size;
++ }
++
++ return pTempBuf;
++}
++
++
++
++// Set the pTempBuf to flash from start_blk to end_blk
++// return:
++// 0 -- ok
++// -1 -- fail
++static int setSharedBlks(int start_blk, int end_blk, char *pTempBuf)
++{
++ int i = 0;
++ int sect_size = 0;
++ int sts = 0;
++ char *pBuf = pTempBuf;
++
++ for (i = start_blk; i < end_blk; i++)
++ {
++ sect_size = flash_get_sector_size((byte) i);
++ flash_sector_erase_int(i);
++ if (flash_write_buf(i, 0, pBuf, sect_size) != sect_size)
++ {
++ printk("Error writing flash sector %d.", i);
++ sts = -1;
++ break;
++ }
++ pBuf += sect_size;
++ }
++
++ return sts;
++}
++
++
++
++/*******************************************************************************
++ * NVRAM functions
++ *******************************************************************************/
++
++// get nvram data
++// return:
++// 0 - ok
++// -1 - fail
++int kerSysNvRamGet(char *string, int strLen, int offset)
++{
++ char *pBuf = NULL;
++
++ if (!flashInitialized)
++ kerSysFlashInit();
++
++ if (strLen > FLASH45_LENGTH_NVRAM)
++ return -1;
++
++ if ((pBuf = getSharedBlks(fInfo.flash_nvram_start_blk,
++ (fInfo.flash_nvram_start_blk + fInfo.flash_nvram_number_blk))) == NULL)
++ return -1;
++
++ // get string off the memory buffer
++ memcpy(string, (pBuf + fInfo.flash_nvram_blk_offset + offset), strLen);
++
++ retriedKfree(pBuf);
++
++ return 0;
++}
++
++
++// set nvram
++// return:
++// 0 - ok
++// -1 - fail
++int kerSysNvRamSet(char *string, int strLen, int offset)
++{
++ int sts = 0;
++ char *pBuf = NULL;
++
++ if (strLen > FLASH45_LENGTH_NVRAM)
++ return -1;
++
++ if ((pBuf = getSharedBlks(fInfo.flash_nvram_start_blk,
++ (fInfo.flash_nvram_start_blk + fInfo.flash_nvram_number_blk))) == NULL)
++ return -1;
++
++ // set string to the memory buffer
++ memcpy((pBuf + fInfo.flash_nvram_blk_offset + offset), string, strLen);
++
++ if (setSharedBlks(fInfo.flash_nvram_start_blk,
++ (fInfo.flash_nvram_number_blk + fInfo.flash_nvram_start_blk), pBuf) != 0)
++ sts = -1;
++
++ retriedKfree(pBuf);
++
++ return sts;
++}
++
++
++/***********************************************************************
++ * Function Name: kerSysEraseNvRam
++ * Description : Erase the NVRAM storage section of flash memory.
++ * Returns : 1 -- ok, 0 -- fail
++ ***********************************************************************/
++int kerSysEraseNvRam(void)
++{
++ int sts = 1;
++ char *tempStorage = retriedKmalloc(FLASH45_LENGTH_NVRAM);
++
++ // just write the whole buf with '0xff' to the flash
++ if (!tempStorage)
++ sts = 0;
++ else
++ {
++ memset(tempStorage, 0xff, FLASH45_LENGTH_NVRAM);
++ if (kerSysNvRamSet(tempStorage, FLASH45_LENGTH_NVRAM, 0) != 0)
++ sts = 0;
++ retriedKfree(tempStorage);
++ }
++
++ return sts;
++}
++
++
++/*******************************************************************************
++ * PSI functions
++ *******************************************************************************/
++// get psi data
++// return:
++// 0 - ok
++// -1 - fail
++int kerSysPersistentGet(char *string, int strLen, int offset)
++{
++ char *pBuf = NULL;
++
++ if (strLen > fInfo.flash_persistent_length)
++ return -1;
++
++ if ((pBuf = getSharedBlks(fInfo.flash_persistent_start_blk,
++ (fInfo.flash_persistent_start_blk + fInfo.flash_persistent_number_blk))) == NULL)
++ return -1;
++
++ // get string off the memory buffer
++ memcpy(string, (pBuf + fInfo.flash_persistent_blk_offset + offset), strLen);
++
++ retriedKfree(pBuf);
++
++ return 0;
++}
++
++
++// set psi
++// return:
++// 0 - ok
++// -1 - fail
++int kerSysPersistentSet(char *string, int strLen, int offset)
++{
++ int sts = 0;
++ char *pBuf = NULL;
++
++ if (strLen > fInfo.flash_persistent_length)
++ return -1;
++
++ if ((pBuf = getSharedBlks(fInfo.flash_persistent_start_blk,
++ (fInfo.flash_persistent_start_blk + fInfo.flash_persistent_number_blk))) == NULL)
++ return -1;
++
++ // set string to the memory buffer
++ memcpy((pBuf + fInfo.flash_persistent_blk_offset + offset), string, strLen);
++
++ if (setSharedBlks(fInfo.flash_persistent_start_blk,
++ (fInfo.flash_persistent_number_blk + fInfo.flash_persistent_start_blk), pBuf) != 0)
++ sts = -1;
++
++ retriedKfree(pBuf);
++
++ return sts;
++}
++
++
++// flash bcm image
++// return:
++// 0 - ok
++// !0 - the sector number fail to be flashed (should not be 0)
++int kerSysBcmImageSet( int flash_start_addr, char *string, int size)
++{
++ int sts;
++ int sect_size;
++ int blk_start;
++ int i;
++ char *pTempBuf = NULL;
++ int whole_image = 0;
++
++ blk_start = flash_get_blk(flash_start_addr);
++ if( blk_start < 0 )
++ return( -1 );
++
++ if (flash_start_addr == FLASH_BASE && size > FLASH45_LENGTH_BOOT_ROM)
++ whole_image = 1;
++
++ /* write image to flash memory */
++ do
++ {
++ sect_size = flash_get_sector_size(blk_start);
++// NOTE: for memory problem in multiple PVC configuration, temporary get rid of kmalloc this 64K for now.
++// if ((pTempBuf = (char *)retriedKmalloc(sect_size)) == NULL)
++// {
++// printk("Failed to allocate memory with size: %d. Reset the router...\n", sect_size);
++// kerSysMipsSoftReset(); // reset the board right away.
++// }
++ // for whole image, no check on psi
++ if (!whole_image && blk_start == fInfo.flash_persistent_start_blk) // share the blk with psi
++ {
++ if (size > (sect_size - fInfo.flash_persistent_length))
++ {
++ printk("Image is too big\n");
++ break; // image is too big. Can not overwrite to nvram
++ }
++ if ((pTempBuf = (char *)retriedKmalloc(sect_size)) == NULL)
++ {
++ printk("Failed to allocate memory with size: %d. Reset the router...\n", sect_size);
++ kerSysMipsSoftReset(); // reset the board right away.
++ }
++ flash_read_buf((byte)blk_start, 0, pTempBuf, sect_size);
++ if (copy_from_user((void *)pTempBuf,(void *)string, size) != 0)
++ break; // failed ?
++ flash_sector_erase_int(blk_start); // erase blk before flash
++ if (flash_write_buf(blk_start, 0, pTempBuf, sect_size) == sect_size)
++ size = 0; // break out and say all is ok
++ retriedKfree(pTempBuf);
++ break;
++ }
++
++ flash_sector_erase_int(blk_start); // erase blk before flash
++
++ if (sect_size > size)
++ {
++ if (size & 1)
++ size++;
++ sect_size = size;
++ }
++
++ if ((i = flash_write_buf(blk_start, 0, string, sect_size)) != sect_size) {
++ break;
++ }
++ blk_start++;
++ string += sect_size;
++ size -= sect_size;
++ } while (size > 0);
++
++ if (whole_image)
++ {
++ // If flashing a whole image, erase to end of flash.
++ int total_blks = flash_get_numsectors();
++ while( blk_start < total_blks )
++ {
++ flash_sector_erase_int(blk_start);
++ blk_start++;
++ }
++ }
++ if (pTempBuf)
++ retriedKfree(pTempBuf);
++
++ if( size == 0 )
++ sts = 0; // ok
++ else
++ sts = blk_start; // failed to flash this sector
++
++ return sts;
++}
++
++/*******************************************************************************
++ * SP functions
++ *******************************************************************************/
++// get sp data. NOTE: memcpy work here -- not using copy_from/to_user
++// return:
++// 0 - ok
++// -1 - fail
++int kerSysScratchPadGet(char *tokenId, char *tokBuf, int bufLen)
++{
++ PSP_HEADER pHead = NULL;
++ PSP_TOKEN pToken = NULL;
++ char *pBuf = NULL;
++ char *pShareBuf = NULL;
++ char *startPtr = NULL;
++ char *endPtr = NULL;
++ char *spEndPtr = NULL;
++ int sts = -1;
++
++ if (fInfo.flash_scratch_pad_length == 0)
++ return sts;
++
++ if (bufLen >= (fInfo.flash_scratch_pad_length - sizeof(SP_HEADER) - sizeof(SP_TOKEN)))
++ {
++ printk("Exceed scratch pad space by %d\n", bufLen - fInfo.flash_scratch_pad_length \
++ - sizeof(SP_HEADER) - sizeof(SP_TOKEN));
++ return sts;
++ }
++
++ if ((pShareBuf = getSharedBlks(fInfo.flash_scratch_pad_start_blk,
++ (fInfo.flash_scratch_pad_start_blk + fInfo.flash_scratch_pad_number_blk))) == NULL)
++ return sts;
++
++ // pBuf points to SP buf
++ pBuf = pShareBuf + fInfo.flash_scratch_pad_blk_offset;
++
++ pHead = (PSP_HEADER) pBuf;
++ if (memcmp(pHead->SPMagicNum, MAGIC_NUMBER, MAGIC_NUM_LEN) != 0)
++ {
++ printk("Scrap pad is not initialized.\n");
++ return sts;
++ }
++
++ // search up to SPUsedLen for the token
++ startPtr = pBuf + sizeof(SP_HEADER);
++ endPtr = pBuf + pHead->SPUsedLen;
++ spEndPtr = pBuf + SP_MAX_LEN;
++ while (startPtr < endPtr && startPtr < spEndPtr)
++ {
++ pToken = (PSP_TOKEN) startPtr;
++ if (strncmp(pToken->tokenName, tokenId, TOKEN_NAME_LEN) == 0)
++ {
++ memcpy(tokBuf, startPtr + sizeof(SP_TOKEN), bufLen);
++ sts = 0;
++ break;
++ }
++ // get next token
++ startPtr += sizeof(SP_TOKEN) + pToken->tokenLen;
++ }
++
++ retriedKfree(pShareBuf);
++
++ return sts;
++}
++
++
++// set sp. NOTE: memcpy work here -- not using copy_from/to_user
++// return:
++// 0 - ok
++// -1 - fail
++int kerSysScratchPadSet(char *tokenId, char *tokBuf, int bufLen)
++{
++ PSP_TOKEN pToken = NULL;
++ PSP_HEADER pHead = NULL;
++ char *pShareBuf = NULL;
++ char *pBuf = NULL;
++ SP_HEADER SPHead;
++ SP_TOKEN SPToken;
++ char *curPtr;
++ int sts = -1;
++
++ if (fInfo.flash_scratch_pad_length == 0)
++ return sts;
++
++ if (bufLen >= (fInfo.flash_scratch_pad_length - sizeof(SP_HEADER) - sizeof(SP_TOKEN)))
++ {
++ printk("Exceed scratch pad space by %d\n", bufLen - fInfo.flash_scratch_pad_length \
++ - sizeof(SP_HEADER) - sizeof(SP_TOKEN));
++ return sts;
++ }
++
++ if ((pShareBuf = getSharedBlks(fInfo.flash_scratch_pad_start_blk,
++ (fInfo.flash_scratch_pad_start_blk + fInfo.flash_scratch_pad_number_blk))) == NULL)
++ return sts;
++
++ // pBuf points to SP buf
++ pBuf = pShareBuf + fInfo.flash_scratch_pad_blk_offset;
++ pHead = (PSP_HEADER) pBuf;
++
++ // form header info. SPUsedLen later on...
++ memset((char *)&SPHead, 0, sizeof(SP_HEADER));
++ memcpy(SPHead.SPMagicNum, MAGIC_NUMBER, MAGIC_NUM_LEN);
++ SPHead.SPVersion = SP_VERSION;
++
++ // form token info.
++ memset((char*)&SPToken, 0, sizeof(SP_TOKEN));
++ strncpy(SPToken.tokenName, tokenId, TOKEN_NAME_LEN - 1);
++ SPToken.tokenLen = bufLen;
++ if (memcmp(pHead->SPMagicNum, MAGIC_NUMBER, MAGIC_NUM_LEN) != 0)
++ {
++ // new sp, so just flash the token
++ printk("No Scrap pad found. Initialize scratch pad...\n");
++ SPHead.SPUsedLen = sizeof(SP_HEADER) + sizeof(SP_TOKEN) + bufLen;
++ memcpy(pBuf, (char *)&SPHead, sizeof(SP_HEADER));
++ curPtr = pBuf + sizeof(SP_HEADER);
++ memcpy(curPtr, (char *)&SPToken, sizeof(SP_TOKEN));
++ curPtr += sizeof(SP_TOKEN);
++ memcpy(curPtr, tokBuf, bufLen);
++ }
++ else
++ {
++ // need search for the token, if exist with same size overwrite it. if sizes differ,
++ // move over the later token data over and put the new one at the end
++ char *endPtr = pBuf + pHead->SPUsedLen;
++ char *spEndPtr = pBuf + SP_MAX_LEN;
++ curPtr = pBuf + sizeof(SP_HEADER);
++ while (curPtr < endPtr && curPtr < spEndPtr)
++ {
++ pToken = (PSP_TOKEN) curPtr;
++ if (strncmp(pToken->tokenName, tokenId, TOKEN_NAME_LEN) == 0)
++ {
++ if (pToken->tokenLen == bufLen) // overwirte it
++ {
++ memcpy((curPtr+sizeof(SP_TOKEN)), tokBuf, bufLen);
++ break;
++ }
++ else // move later data over and put the new token at the end
++ {
++ memcpy((curPtr+sizeof(SP_TOKEN)), tokBuf, bufLen); // ~~~
++ break;
++ }
++ }
++ else // not same token ~~~
++ {
++ }
++ // get next token
++ curPtr += sizeof(SP_TOKEN) + pToken->tokenLen;
++ } // end while
++ SPHead.SPUsedLen = sizeof(SP_HEADER) + sizeof(SP_TOKEN) + bufLen; // ~~~
++ if (SPHead.SPUsedLen > SP_MAX_LEN)
++ {
++ printk("No more Scratch pad space left! Over limit by %d bytes\n", SPHead.SPUsedLen - SP_MAX_LEN);
++ return sts;
++ }
++
++ } // else if not new sp
++
++ sts = setSharedBlks(fInfo.flash_scratch_pad_start_blk,
++ (fInfo.flash_scratch_pad_number_blk + fInfo.flash_scratch_pad_start_blk), pShareBuf);
++
++ retriedKfree(pShareBuf);
++
++ return sts;
++
++
++}
++
++int kerSysFlashSizeGet(void)
++{
++ return flash_get_total_size();
++}
++
+diff -urN linux-2.6.8.1/bcmdrivers/opensource/char/board/bcm963xx/impl1/bcm63xx_led.c linux-2.6.8.1-brcm63xx/bcmdrivers/opensource/char/board/bcm963xx/impl1/bcm63xx_led.c
+--- linux-2.6.8.1/bcmdrivers/opensource/char/board/bcm963xx/impl1/bcm63xx_led.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.8.1-brcm63xx/bcmdrivers/opensource/char/board/bcm963xx/impl1/bcm63xx_led.c 2006-06-26 09:07:10.000000000 +0200
+@@ -0,0 +1,582 @@
++/*
++<:copyright-gpl
++ Copyright 2002 Broadcom Corp. All Rights Reserved.
++
++ This program is free software; you can distribute it and/or modify it
++ under the terms of the GNU General Public License (Version 2) as
++ published by the Free Software Foundation.
++
++ This program is distributed in the hope it will be useful, but WITHOUT
++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
++ for more details.
++
++ You should have received a copy of the GNU General Public License along
++ with this program; if not, write to the Free Software Foundation, Inc.,
++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
++:>
++*/
++/***************************************************************************
++ * File Name : bcm63xx_led.c
++ *
++ * Description:
++ *
++ * This file contains bcm963xx board led control API functions.
++ *
++ * To use it, do the following
++ *
++ * 1). define in the board.c the following led mappping (this is for 6345GW board):
++ * const LED_MAP_PAIR cLedMapping45GW[] =
++ * { // led name Initial state physical pin (ledMask)
++ * {kLedUsb, kLedStateOff, GPIO_LED_PIN_7},
++ * {kLedAdsl, kLedStateOff, GPIO_LED_PIN_8},
++ * {kLedPPP, kLedStateOff, GPIO_LED_PIN_9}, // PPP and WanData share PIN_9
++ * {kLedWanData, kLedStateOff, GPIO_LED_PIN_9},
++ * {kLedWireless, kLedStateOff, GPIO_LED_PIN_10},
++ * {kLedEnd, kLedStateOff, 0 } // NOTE: kLedEnd has to be at the end.
++ *
++ * 2). };To initialize led API and initial state of the leds, call the following function with the mapping
++ * pointer from the above struct
++ *
++ * boardLedInit((PLED_MAP_PAIR) &cLedMapping45R);
++ *
++ * 3). Sample call for kernel mode:
++ *
++ * kerSysLedCtrl(kLedAdsl, kLedStateBlinkOnce); // kLedxxx defines in board.h
++ *
++ * 4). Sample call for user mode
++ *
++ * sysLedCtrl(kLedAdsl, kLedStateBlinkOnce); // kLedxxx defines in board_api.h
++ *
++ *
++ * Created on : 10/28/2002 seanl
++ *
++ ***************************************************************************/
++
++/* Includes. */
++#include <linux/init.h>
++#include <linux/fs.h>
++#include <linux/capability.h>
++#include <linux/slab.h>
++#include <linux/errno.h>
++#include <linux/module.h>
++#include <linux/netdevice.h>
++#include <asm/uaccess.h>
++
++#include <bcm_map_part.h>
++#include <board.h>
++
++#define k100ms (HZ / 10) // ~100 ms
++#define kFastBlinkCount 0 // ~100ms
++#define kSlowBlinkCount 5 // ~600ms
++
++#define MAX_VIRT_LEDS 12
++
++// uncomment // for debug led
++//#define DEBUG_LED
++
++// global variables:
++struct timer_list gLedTimer;
++int gTimerOn = FALSE;
++int gLedCount = 0;
++
++typedef struct ledinfo
++{
++ unsigned short ledMask; // mask for led: ie. giop 10 = 0x0400
++ unsigned short ledActiveLow; // GPIO bit reset to turn on LED
++ unsigned short ledMaskFail; // mask for led: ie. giop 10 = 0x0400
++ unsigned short ledActiveLowFail;// GPIO bit reset to turn on LED
++ BOARD_LED_STATE ledState; // current led state
++ BOARD_LED_STATE savedLedState; // used in blink once for restore to the orignal ledState
++ int blinkCountDown; // if == 0, do blink (toggle). Is assgined value and dec by 1 at each timer.
++} LED_INFO, *PLED_INFO;
++
++static PLED_INFO gLed = NULL;
++static PLED_INFO gpVirtLeds[MAX_VIRT_LEDS];
++static HANDLE_LED_FUNC gLedHwFunc[MAX_VIRT_LEDS];
++static HANDLE_LED_FUNC gLedHwFailFunc[MAX_VIRT_LEDS];
++
++#if 0 /* BROKEN */
++#if defined(CONFIG_BCM96348) || defined(CONFIG_BCM96338)
++static int gLedOffInBridgeMode = 1;
++#elif defined(CONFIG_BCM96345)
++static int gLedOffInBridgeMode = 0;
++#endif
++#endif
++
++void ledTimerExpire(void);
++int initLedInfo( PLED_MAP_PAIR pCurMap, PLED_INFO pCurLed );
++
++//**************************************************************************************
++// LED operations
++//**************************************************************************************
++
++// turn led on and set the ledState
++void ledOn(PLED_INFO pLed)
++{
++ if( pLed->ledMask )
++ {
++ GPIO->GPIODir |= pLed->ledMask; // turn on the direction bit in case was turned off by some one
++ if( pLed->ledActiveLow )
++ GPIO->GPIOio &= ~pLed->ledMask; // turn on the led
++ else
++ GPIO->GPIOio |= pLed->ledMask; // turn on the led
++ pLed->ledState = pLed->savedLedState = kLedStateOn;
++ }
++}
++
++
++// turn led off and set the ledState
++void ledOff(PLED_INFO pLed)
++{
++ if( pLed->ledMask )
++ {
++ GPIO->GPIODir |= pLed->ledMask; // turn on the direction bit in case was turned off by some one
++ if( pLed->ledActiveLow )
++ GPIO->GPIOio |= pLed->ledMask; // turn off the led
++ else
++ GPIO->GPIOio &= ~pLed->ledMask; // turn off the led
++ pLed->ledState = pLed->savedLedState = kLedStateOff;
++ }
++}
++
++// turn led on and set the ledState
++void ledOnFail(PLED_INFO pLed)
++{
++ if( pLed->ledMaskFail )
++ {
++ GPIO->GPIODir |= pLed->ledMaskFail; // turn on the direction bit in case was turned off by some one
++ if( pLed->ledActiveLowFail )
++ GPIO->GPIOio &= ~pLed->ledMaskFail;// turn on the led
++ else
++ GPIO->GPIOio |= pLed->ledMaskFail; // turn on the led
++ pLed->ledState = pLed->savedLedState = kLedStateFail;
++ }
++}
++
++
++// turn led off and set the ledState
++void ledOffFail(PLED_INFO pLed)
++{
++ if( pLed->ledMaskFail )
++ {
++ GPIO->GPIODir |= pLed->ledMaskFail; // turn on the direction bit in case was turned off by some one
++ if( pLed->ledActiveLowFail )
++ GPIO->GPIOio |= pLed->ledMaskFail; // turn off the led
++ else
++ GPIO->GPIOio &= ~pLed->ledMaskFail;// turn off the led
++ pLed->ledState = pLed->savedLedState = kLedStateOff;
++ }
++}
++
++
++// toggle the led and return the current ledState
++BOARD_LED_STATE ledToggle(PLED_INFO pLed)
++{
++ GPIO->GPIODir |= pLed->ledMask; // turn on the direction bit in case was turned off by some one
++ if (GPIO->GPIOio & pLed->ledMask)
++ {
++ GPIO->GPIOio &= ~(pLed->ledMask);
++ return( (pLed->ledActiveLow) ? kLedStateOn : kLedStateOff );
++ }
++ else
++ {
++ GPIO->GPIOio |= pLed->ledMask;
++ return( (pLed->ledActiveLow) ? kLedStateOff : kLedStateOn );
++ }
++}
++
++
++// led timer. Will return if timer is already on
++void ledTimerStart(void)
++{
++ if (gTimerOn)
++ return;
++
++#if defined(DEBUG_LED)
++ printk("led: add_timer\n");
++#endif
++
++ init_timer(&gLedTimer);
++ gLedTimer.function = (void*)ledTimerExpire;
++ gLedTimer.expires = jiffies + k100ms; // timer expires in ~100ms
++ add_timer (&gLedTimer);
++ gTimerOn = TRUE;
++}
++
++
++// led timer expire kicks in about ~100ms and perform the led operation according to the ledState and
++// restart the timer according to ledState
++void ledTimerExpire(void)
++{
++ int i;
++ PLED_INFO pCurLed;
++
++ gTimerOn = FALSE;
++
++ for (i = 0, pCurLed = gLed; i < gLedCount; i++, pCurLed++)
++ {
++#if defined(DEBUG_LED)
++ printk("led[%d]: Mask=0x%04x, State = %d, blcd=%d\n", i, pCurLed->ledMask, pCurLed->ledState, pCurLed->blinkCountDown);
++#endif
++ switch (pCurLed->ledState)
++ {
++ case kLedStateOn:
++ case kLedStateOff:
++ case kLedStateFail:
++ pCurLed->blinkCountDown = 0; // reset the blink count down
++ break;
++
++ case kLedStateBlinkOnce:
++ ledToggle(pCurLed);
++ pCurLed->blinkCountDown = 0; // reset to 0
++ pCurLed->ledState = pCurLed->savedLedState;
++ if (pCurLed->ledState == kLedStateSlowBlinkContinues ||
++ pCurLed->ledState == kLedStateFastBlinkContinues)
++ ledTimerStart(); // start timer if in blinkContinues stats
++ break;
++
++ case kLedStateSlowBlinkContinues:
++ if (pCurLed->blinkCountDown-- == 0)
++ {
++ pCurLed->blinkCountDown = kSlowBlinkCount;
++ ledToggle(pCurLed);
++ }
++ ledTimerStart();
++ break;
++
++ case kLedStateFastBlinkContinues:
++ if (pCurLed->blinkCountDown-- == 0)
++ {
++ pCurLed->blinkCountDown = kFastBlinkCount;
++ ledToggle(pCurLed);
++ }
++ ledTimerStart();
++ break;
++
++ default:
++ printk("Invalid state = %d\n", pCurLed->ledState);
++ }
++ }
++}
++
++// initialize the gLedCount and allocate and fill gLed struct
++void __init boardLedInit(PLED_MAP_PAIR cLedMapping)
++{
++ PLED_MAP_PAIR p1, p2;
++ PLED_INFO pCurLed;
++ int needTimer = FALSE;
++ int alreadyUsed = 0;
++
++#if defined(CONFIG_BCM96348) || defined(CONFIG_BCM96338)
++ /* Set blink rate for BCM6348/BCM6338 hardware LEDs. */
++ GPIO->LEDCtrl &= ~LED_INTERVAL_SET_MASK;
++ GPIO->LEDCtrl |= LED_INTERVAL_SET_80MS;
++#endif
++
++ memset( gpVirtLeds, 0x00, sizeof(gpVirtLeds) );
++ memset( gLedHwFunc, 0x00, sizeof(gLedHwFunc) );
++ memset( gLedHwFailFunc, 0x00, sizeof(gLedHwFailFunc) );
++
++ gLedCount = 0;
++
++ // Check for multiple LED names and multiple LED GPIO pins that share the
++ // same physical board LED.
++ for( p1 = cLedMapping; p1->ledName != kLedEnd; p1++ )
++ {
++ alreadyUsed = 0;
++ for( p2 = cLedMapping; p2 != p1; p2++ )
++ {
++ if( (p1->ledMask && p1->ledMask == p2->ledMask) ||
++ (p1->ledMaskFail && p1->ledMaskFail == p2->ledMaskFail) )
++ {
++ alreadyUsed = 1;
++ break;
++ }
++ }
++
++ if( alreadyUsed == 0 )
++ gLedCount++;
++ }
++
++ gLed = (PLED_INFO) kmalloc((gLedCount * sizeof(LED_INFO)), GFP_KERNEL);
++ if( gLed == NULL )
++ {
++ printk( "LED memory allocation error.\n" );
++ return;
++ }
++
++ memset( gLed, 0x00, gLedCount * sizeof(LED_INFO) );
++
++ // initial the gLed with unique ledMask and initial state. If more than 1 ledNames share the physical led
++ // (ledMask) the first defined led's ledInitState will be used.
++ pCurLed = gLed;
++ for( p1 = cLedMapping; p1->ledName != kLedEnd; p1++ )
++ {
++ if( (int) p1->ledName > MAX_VIRT_LEDS )
++ continue;
++
++ alreadyUsed = 0;
++ for( p2 = cLedMapping; p2 != p1; p2++ )
++ {
++ if( (p1->ledMask && p1->ledMask == p2->ledMask) ||
++ (p1->ledMaskFail && p1->ledMaskFail == p2->ledMaskFail) )
++ {
++ alreadyUsed = 1;
++ break;
++ }
++ }
++
++ if( alreadyUsed == 0 )
++ {
++ // Initialize the board LED for the first time.
++ needTimer = initLedInfo( p1, pCurLed );
++ gpVirtLeds[(int) p1->ledName] = pCurLed;
++ pCurLed++;
++ }
++ else
++ {
++ PLED_INFO pLed;
++ for( pLed = gLed; pLed != pCurLed; pLed++ )
++ {
++ // Find the LED_INFO structure that has already been initialized.
++ if((pLed->ledMask && pLed->ledMask == p1->ledMask) ||
++ (pLed->ledMaskFail && pLed->ledMaskFail==p1->ledMaskFail))
++ {
++ // The board LED has already been initialized but possibly
++ // not completely initialized.
++ if( p1->ledMask )
++ {
++ pLed->ledMask = p1->ledMask;
++ pLed->ledActiveLow = p1->ledActiveLow;
++ }
++ if( p1->ledMaskFail )
++ {
++ pLed->ledMaskFail = p1->ledMaskFail;
++ pLed->ledActiveLowFail = p1->ledActiveLowFail;
++ }
++ gpVirtLeds[(int) p1->ledName] = pLed;
++ break;
++ }
++ }
++ }
++ }
++
++ if (needTimer)
++ ledTimerStart();
++
++#if defined(DEBUG_LED)
++ int i;
++ for (i=0; i < gLedCount; i++)
++ printk("initLed: led[%d]: mask=0x%04x, state=%d\n", i,(gLed+i)->ledMask, (gLed+i)->ledState);
++#endif
++
++}
++
++// Initialize a structure that contains information about a physical board LED
++// control. The board LED may contain more than one GPIO pin to control a
++// normal condition (green) or a failure condition (red).
++int initLedInfo( PLED_MAP_PAIR pCurMap, PLED_INFO pCurLed )
++{
++ int needTimer = FALSE;
++ pCurLed->ledState = pCurLed->savedLedState = pCurMap->ledInitState;
++ pCurLed->ledMask = pCurMap->ledMask;
++ pCurLed->ledActiveLow = pCurMap->ledActiveLow;
++ pCurLed->ledMaskFail = pCurMap->ledMaskFail;
++ pCurLed->ledActiveLowFail = pCurMap->ledActiveLowFail;
++
++ switch (pCurLed->ledState)
++ {
++ case kLedStateOn:
++ pCurLed->blinkCountDown = 0; // reset the blink count down
++ ledOn(pCurLed);
++ break;
++ case kLedStateOff:
++ pCurLed->blinkCountDown = 0; // reset the blink count down
++ ledOff(pCurLed);
++ break;
++ case kLedStateFail:
++ pCurLed->blinkCountDown = 0; // reset the blink count down
++ ledOnFail(pCurLed);
++ break;
++ case kLedStateBlinkOnce:
++ pCurLed->blinkCountDown = 1;
++ needTimer = TRUE;
++ break;
++ case kLedStateSlowBlinkContinues:
++ pCurLed->blinkCountDown = kSlowBlinkCount;
++ needTimer = TRUE;
++ break;
++ case kLedStateFastBlinkContinues:
++ pCurLed->blinkCountDown = kFastBlinkCount;
++ needTimer = TRUE;
++ break;
++ default:
++ printk("Invalid state = %d\n", pCurLed->ledState);
++ }
++
++ return( needTimer );
++}
++
++#if 0 /* BROKEN */
++// Determines if there is at least one interface in bridge mode. Bridge mode
++// is determined by the cfm convention of naming bridge interfaces nas17
++// through nas24.
++static int isBridgedProtocol(void)
++{
++ extern int dev_get(const char *name);
++ const int firstBridgeId = 17;
++ const int lastBridgeId = 24;
++ int i;
++ int ret = FALSE;
++ char name[16];
++
++ for( i = firstBridgeId; i <= lastBridgeId; i++ )
++ {
++ sprintf( name, "nas%d", i );
++
++ if( dev_get(name) )
++ {
++ ret = TRUE;
++ break;
++ }
++ }
++
++ return(ret);
++}
++#endif
++
++// led ctrl. Maps the ledName to the corresponding ledInfoPtr and perform the led operation
++void boardLedCtrl(BOARD_LED_NAME ledName, BOARD_LED_STATE ledState)
++{
++ PLED_INFO ledInfoPtr;
++
++ // do the mapping from virtual to physical led
++ if( (int) ledName < MAX_VIRT_LEDS )
++ ledInfoPtr = gpVirtLeds[(int) ledName];
++ else
++ ledInfoPtr = NULL;
++
++ if (ledInfoPtr == NULL)
++ return;
++
++ if( ledState != kLedStateFail && gLedHwFunc[(int) ledName] )
++ {
++ (*gLedHwFunc[(int) ledName]) (ledName, ledState);
++ ledOffFail(ledInfoPtr);
++ return;
++ }
++ else
++ if( ledState == kLedStateFail && gLedHwFailFunc[(int) ledName] )
++ {
++ (*gLedHwFailFunc[(int) ledName]) (ledName, ledState);
++ ledOff(ledInfoPtr);
++ return;
++ }
++
++#if 0 /* BROKEN */
++ // Do not blink the WAN Data LED if at least one interface is in bridge mode.
++ if(gLedOffInBridgeMode == 1 && (ledName == kLedWanData || ledName == kLedPPP))
++ {
++ static int BridgedProtocol = -1;
++
++ if( BridgedProtocol == -1 )
++ BridgedProtocol = isBridgedProtocol();
++
++ if( BridgedProtocol == TRUE )
++ return;
++ }
++#endif
++
++ // If the state is kLedStateFail and there is not a failure LED defined
++ // in the board parameters, change the state to kLedStateFastBlinkContinues.
++ if( ledState == kLedStateFail && ledInfoPtr->ledMaskFail == 0 )
++ ledState = kLedStateFastBlinkContinues;
++
++ switch (ledState)
++ {
++ case kLedStateOn:
++ // First, turn off the complimentary (failure) LED GPIO.
++ if( ledInfoPtr->ledMaskFail )
++ ledOffFail(ledInfoPtr);
++ else
++ if( gLedHwFailFunc[(int) ledName] )
++ (*gLedHwFailFunc[(int) ledName]) (ledName, kLedStateOff);
++
++ // Next, turn on the specified LED GPIO.
++ ledOn(ledInfoPtr);
++ break;
++
++ case kLedStateOff:
++ // First, turn off the complimentary (failure) LED GPIO.
++ if( ledInfoPtr->ledMaskFail )
++ ledOffFail(ledInfoPtr);
++ else
++ if( gLedHwFailFunc[(int) ledName] )
++ (*gLedHwFailFunc[(int) ledName]) (ledName, kLedStateOff);
++
++ // Next, turn off the specified LED GPIO.
++ ledOff(ledInfoPtr);
++ break;
++
++ case kLedStateFail:
++ // First, turn off the complimentary (normal) LED GPIO.
++ if( ledInfoPtr->ledMask )
++ ledOff(ledInfoPtr);
++ else
++ if( gLedHwFunc[(int) ledName] )
++ (*gLedHwFunc[(int) ledName]) (ledName, kLedStateOff);
++
++ // Next, turn on (red) the specified LED GPIO.
++ ledOnFail(ledInfoPtr);
++ break;
++
++ case kLedStateBlinkOnce:
++ // skip blinkOnce if it is already in Slow/Fast blink continues state
++ if (ledInfoPtr->savedLedState == kLedStateSlowBlinkContinues ||
++ ledInfoPtr->savedLedState == kLedStateFastBlinkContinues)
++ ;
++ else
++ {
++ if (ledInfoPtr->blinkCountDown == 0) // skip the call if it is 1
++ {
++ ledToggle(ledInfoPtr);
++ ledInfoPtr->blinkCountDown = 1; // it will be reset to 0 when timer expires
++ ledInfoPtr->ledState = kLedStateBlinkOnce;
++ ledTimerStart();
++ }
++ }
++ break;
++
++ case kLedStateSlowBlinkContinues:
++ ledInfoPtr->blinkCountDown = kSlowBlinkCount;
++ ledInfoPtr->ledState = kLedStateSlowBlinkContinues;
++ ledInfoPtr->savedLedState = kLedStateSlowBlinkContinues;
++ ledTimerStart();
++ break;
++
++ case kLedStateFastBlinkContinues:
++ ledInfoPtr->blinkCountDown = kFastBlinkCount;
++ ledInfoPtr->ledState = kLedStateFastBlinkContinues;
++ ledInfoPtr->savedLedState = kLedStateFastBlinkContinues;
++ ledTimerStart();
++ break;
++
++ default:
++ printk("Invalid led state\n");
++ }
++}
++
++// This function is called for an LED that is controlled by hardware.
++void kerSysLedRegisterHwHandler( BOARD_LED_NAME ledName,
++ HANDLE_LED_FUNC ledHwFunc, int ledFailType )
++{
++ if( (int) ledName < MAX_VIRT_LEDS )
++ {
++ if( ledFailType == 1 )
++ gLedHwFailFunc[(int) ledName] = ledHwFunc;
++ else
++ gLedHwFunc[(int) ledName] = ledHwFunc;
++ }
++}
++
+diff -urN linux-2.6.8.1/bcmdrivers/opensource/char/board/bcm963xx/impl1/board.c linux-2.6.8.1-brcm63xx/bcmdrivers/opensource/char/board/bcm963xx/impl1/board.c
+--- linux-2.6.8.1/bcmdrivers/opensource/char/board/bcm963xx/impl1/board.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.8.1-brcm63xx/bcmdrivers/opensource/char/board/bcm963xx/impl1/board.c 2006-06-26 09:07:10.000000000 +0200
+@@ -0,0 +1,1570 @@
++/*
++<:copyright-gpl
++ Copyright 2002 Broadcom Corp. All Rights Reserved.
++
++ This program is free software; you can distribute it and/or modify it
++ under the terms of the GNU General Public License (Version 2) as
++ published by the Free Software Foundation.
++
++ This program is distributed in the hope it will be useful, but WITHOUT
++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
++ for more details.
++
++ You should have received a copy of the GNU General Public License along
++ with this program; if not, write to the Free Software Foundation, Inc.,
++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
++:>
++*/
++/***************************************************************************
++ * File Name : board.c
++ *
++ * Description: This file contains Linux character device driver entry
++ * for the board related ioctl calls: flash, get free kernel
++ * page and dump kernel memory, etc.
++ *
++ * Created on : 2/20/2002 seanl: use cfiflash.c, cfliflash.h (AMD specific)
++ *
++ ***************************************************************************/
++
++
++/* Includes. */
++#include <linux/version.h>
++#include <linux/init.h>
++#include <linux/fs.h>
++#include <linux/interrupt.h>
++#include <linux/capability.h>
++#include <linux/slab.h>
++#include <linux/errno.h>
++#include <linux/module.h>
++#include <linux/pagemap.h>
++#include <asm/uaccess.h>
++#include <linux/wait.h>
++#include <linux/poll.h>
++#include <linux/sched.h>
++#include <linux/list.h>
++#include <linux/if.h>
++
++#include <bcm_map_part.h>
++#include <board.h>
++#include <bcmTag.h>
++#include "boardparms.h"
++#include "cfiflash.h"
++#include "bcm_intr.h"
++#include "board.h"
++#include "bcm_map_part.h"
++
++/* Typedefs. */
++#if defined (NON_CONSECUTIVE_MAC)
++// used to be the last octet. Now changed to the first 5 bits of the the forth octet
++// to reduced the duplicated MAC addresses.
++#define CHANGED_OCTET 3
++#define SHIFT_BITS 3
++#else
++#define CHANGED_OCTET 1
++#define SHIFT_BITS 0
++#endif
++
++#if defined (WIRELESS)
++#define SES_BTN_PRESSED 0x00000001
++#define SES_EVENTS SES_BTN_PRESSED /*OR all values if any*/
++#define SES_LED_OFF 0
++#define SES_LED_ON 1
++#define SES_LED_BLINK 2
++#endif
++
++typedef struct
++{
++ unsigned long ulId;
++ char chInUse;
++ char chReserved[3];
++} MAC_ADDR_INFO, *PMAC_ADDR_INFO;
++
++typedef struct
++{
++ unsigned long ulSdramSize;
++ unsigned long ulPsiSize;
++ unsigned long ulNumMacAddrs;
++ unsigned long ucaBaseMacAddr[NVRAM_MAC_ADDRESS_LEN];
++ MAC_ADDR_INFO MacAddrs[1];
++} NVRAM_INFO, *PNVRAM_INFO;
++
++typedef struct
++{
++ unsigned long eventmask;
++} BOARD_IOC, *PBOARD_IOC;
++
++
++/*Dyinggasp callback*/
++typedef void (*cb_dgasp_t)(void *arg);
++typedef struct _CB_DGASP__LIST
++{
++ struct list_head list;
++ char name[IFNAMSIZ];
++ cb_dgasp_t cb_dgasp_fn;
++ void *context;
++}CB_DGASP_LIST , *PCB_DGASP_LIST;
++
++
++static LED_MAP_PAIR LedMapping[] =
++{ // led name Initial state physical pin (ledMask)
++ {kLedEnd, kLedStateOff, 0, 0, 0, 0},
++ {kLedEnd, kLedStateOff, 0, 0, 0, 0},
++ {kLedEnd, kLedStateOff, 0, 0, 0, 0},
++ {kLedEnd, kLedStateOff, 0, 0, 0, 0},
++ {kLedEnd, kLedStateOff, 0, 0, 0, 0},
++ {kLedEnd, kLedStateOff, 0, 0, 0, 0},
++ {kLedEnd, kLedStateOff, 0, 0, 0, 0},
++ {kLedEnd, kLedStateOff, 0, 0, 0, 0},
++ {kLedEnd, kLedStateOff, 0, 0, 0, 0} // NOTE: kLedEnd has to be at the end.
++};
++
++/* Externs. */
++extern struct file fastcall *fget_light(unsigned int fd, int *fput_needed);
++extern unsigned int nr_free_pages (void);
++extern const char *get_system_type(void);
++extern void kerSysFlashInit(void);
++extern unsigned long get_nvram_start_addr(void);
++extern unsigned long get_scratch_pad_start_addr(void);
++extern unsigned long getMemorySize(void);
++extern void __init boardLedInit(PLED_MAP_PAIR);
++extern void boardLedCtrl(BOARD_LED_NAME, BOARD_LED_STATE);
++extern void kerSysLedRegisterHandler( BOARD_LED_NAME ledName,
++ HANDLE_LED_FUNC ledHwFunc, int ledFailType );
++
++/* Prototypes. */
++void __init InitNvramInfo( void );
++static int board_open( struct inode *inode, struct file *filp );
++static int board_ioctl( struct inode *inode, struct file *flip, unsigned int command, unsigned long arg );
++static ssize_t board_read(struct file *filp, char __user *buffer, size_t count, loff_t *ppos);
++static unsigned int board_poll(struct file *filp, struct poll_table_struct *wait);
++static int board_release(struct inode *inode, struct file *filp);
++
++static BOARD_IOC* borad_ioc_alloc(void);
++static void borad_ioc_free(BOARD_IOC* board_ioc);
++
++/* DyingGasp function prototype */
++static void __init kerSysDyingGaspMapIntr(void);
++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0))
++static irqreturn_t kerSysDyingGaspIsr(int irq, void * dev_id, struct pt_regs * regs);
++#else
++static unsigned int kerSysDyingGaspIsr(void);
++#endif
++static void __init kerSysInitDyingGaspHandler( void );
++static void __exit kerSysDeinitDyingGaspHandler( void );
++/* -DyingGasp function prototype - */
++
++
++#if defined (WIRELESS)
++static irqreturn_t sesBtn_isr(int irq, void *dev_id, struct pt_regs *ptregs);
++static void __init sesBtn_mapGpio(void);
++static void __init sesBtn_mapIntr(int context);
++static unsigned int sesBtn_poll(struct file *file, struct poll_table_struct *wait);
++static ssize_t sesBtn_read(struct file *file, char __user *buffer, size_t count, loff_t *ppos);
++static void __init sesLed_mapGpio(void);
++static void sesLed_ctrl(int action);
++static void __init ses_board_init(void);
++static void __exit ses_board_deinit(void);
++#endif
++
++static PNVRAM_INFO g_pNvramInfo = NULL;
++static int g_ledInitialized = 0;
++static wait_queue_head_t g_board_wait_queue;
++static CB_DGASP_LIST *g_cb_dgasp_list_head = NULL;
++
++static int g_wakeup_monitor = 0;
++static struct file *g_monitor_file = NULL;
++static struct task_struct *g_monitor_task = NULL;
++static unsigned int (*g_orig_fop_poll)
++ (struct file *, struct poll_table_struct *) = NULL;
++
++static struct file_operations board_fops =
++{
++ open: board_open,
++ ioctl: board_ioctl,
++ poll: board_poll,
++ read: board_read,
++ release: board_release,
++};
++
++uint32 board_major = 0;
++
++#if defined (WIRELESS)
++static unsigned short sesBtn_irq = BP_NOT_DEFINED;
++static unsigned short sesBtn_gpio = BP_NOT_DEFINED;
++static unsigned short sesLed_gpio = BP_NOT_DEFINED;
++#endif
++
++#if defined(MODULE)
++int init_module(void)
++{
++ return( brcm_board_init() );
++}
++
++void cleanup_module(void)
++{
++ if (MOD_IN_USE)
++ printk("brcm flash: cleanup_module failed because module is in use\n");
++ else
++ brcm_board_cleanup();
++}
++#endif //MODULE
++
++
++
++static int __init brcm_board_init( void )
++{
++ typedef int (*BP_LED_FUNC) (unsigned short *);
++ static struct BpLedInformation
++ {
++ BOARD_LED_NAME ledName;
++ BP_LED_FUNC bpFunc;
++ BP_LED_FUNC bpFuncFail;
++ } bpLedInfo[] =
++ {{kLedAdsl, BpGetAdslLedGpio, BpGetAdslFailLedGpio},
++ {kLedWireless, BpGetWirelessLedGpio, NULL},
++ {kLedUsb, BpGetUsbLedGpio, NULL},
++ {kLedHpna, BpGetHpnaLedGpio, NULL},
++ {kLedWanData, BpGetWanDataLedGpio, NULL},
++ {kLedPPP, BpGetPppLedGpio, BpGetPppFailLedGpio},
++ {kLedVoip, BpGetVoipLedGpio, NULL},
++ {kLedSes, BpGetWirelessSesLedGpio, NULL},
++ {kLedEnd, NULL, NULL}
++ };
++
++ int ret;
++
++ ret = register_chrdev(BOARD_DRV_MAJOR, "bcrmboard", &board_fops );
++ if (ret < 0)
++ printk( "brcm_board_init(major %d): fail to register device.\n",BOARD_DRV_MAJOR);
++ else
++ {
++ PLED_MAP_PAIR pLedMap = LedMapping;
++ unsigned short gpio;
++ struct BpLedInformation *pInfo;
++
++ printk("brcmboard: brcm_board_init entry\n");
++ board_major = BOARD_DRV_MAJOR;
++ InitNvramInfo();
++
++ for( pInfo = bpLedInfo; pInfo->ledName != kLedEnd; pInfo++ )
++ {
++ if( pInfo->bpFunc && (*pInfo->bpFunc) (&gpio) == BP_SUCCESS )
++ {
++ pLedMap->ledName = pInfo->ledName;
++ pLedMap->ledMask = GPIO_NUM_TO_MASK(gpio);
++ pLedMap->ledActiveLow = (gpio & BP_ACTIVE_LOW) ? 1 : 0;
++ }
++ if( pInfo->bpFuncFail && (*pInfo->bpFuncFail) (&gpio) == BP_SUCCESS )
++ {
++ pLedMap->ledName = pInfo->ledName;
++ pLedMap->ledMaskFail = GPIO_NUM_TO_MASK(gpio);
++ pLedMap->ledActiveLowFail = (gpio & BP_ACTIVE_LOW) ? 1 : 0;
++ }
++ if( pLedMap->ledName != kLedEnd )
++ pLedMap++;
++ }
++
++ init_waitqueue_head(&g_board_wait_queue);
++#if defined (WIRELESS)
++ ses_board_init();
++#endif
++ kerSysInitDyingGaspHandler();
++ kerSysDyingGaspMapIntr();
++
++ boardLedInit(LedMapping);
++ g_ledInitialized = 1;
++ }
++
++ return ret;
++}
++
++void __init InitNvramInfo( void )
++{
++ PNVRAM_DATA pNvramData = (PNVRAM_DATA) get_nvram_start_addr();
++ unsigned long ulNumMacAddrs = pNvramData->ulNumMacAddrs;
++
++ if( ulNumMacAddrs > 0 && ulNumMacAddrs <= NVRAM_MAC_COUNT_MAX )
++ {
++ unsigned long ulNvramInfoSize =
++ sizeof(NVRAM_INFO) + ((sizeof(MAC_ADDR_INFO) - 1) * ulNumMacAddrs);
++
++ g_pNvramInfo = (PNVRAM_INFO) kmalloc( ulNvramInfoSize, GFP_KERNEL );
++
++ if( g_pNvramInfo )
++ {
++ unsigned long ulPsiSize;
++ if( BpGetPsiSize( &ulPsiSize ) != BP_SUCCESS )
++ ulPsiSize = NVRAM_PSI_DEFAULT;
++ memset( g_pNvramInfo, 0x00, ulNvramInfoSize );
++ g_pNvramInfo->ulPsiSize = ulPsiSize * 1024;
++ g_pNvramInfo->ulNumMacAddrs = pNvramData->ulNumMacAddrs;
++ memcpy( g_pNvramInfo->ucaBaseMacAddr, pNvramData->ucaBaseMacAddr,
++ NVRAM_MAC_ADDRESS_LEN );
++ g_pNvramInfo->ulSdramSize = getMemorySize();
++ }
++ else
++ printk("ERROR - Could not allocate memory for NVRAM data\n");
++ }
++ else
++ printk("ERROR - Invalid number of MAC addresses (%ld) is configured.\n",
++ ulNumMacAddrs);
++}
++
++void __exit brcm_board_cleanup( void )
++{
++ printk("brcm_board_cleanup()\n");
++
++ if (board_major != -1)
++ {
++#if defined (WIRELESS)
++ ses_board_deinit();
++#endif
++ kerSysDeinitDyingGaspHandler();
++ unregister_chrdev(board_major, "board_ioctl");
++ }
++}
++
++static BOARD_IOC* borad_ioc_alloc(void)
++{
++ BOARD_IOC *board_ioc =NULL;
++ board_ioc = (BOARD_IOC*) kmalloc( sizeof(BOARD_IOC) , GFP_KERNEL );
++ if(board_ioc)
++ {
++ memset(board_ioc, 0, sizeof(BOARD_IOC));
++ }
++ return board_ioc;
++}
++
++static void borad_ioc_free(BOARD_IOC* board_ioc)
++{
++ if(board_ioc)
++ {
++ kfree(board_ioc);
++ }
++}
++
++
++static int board_open( struct inode *inode, struct file *filp )
++{
++ filp->private_data = borad_ioc_alloc();
++
++ if (filp->private_data == NULL)
++ return -ENOMEM;
++
++ return( 0 );
++}
++
++static int board_release(struct inode *inode, struct file *filp)
++{
++ BOARD_IOC *board_ioc = filp->private_data;
++
++ wait_event_interruptible(g_board_wait_queue, 1);
++ borad_ioc_free(board_ioc);
++
++ return( 0 );
++}
++
++
++static unsigned int board_poll(struct file *filp, struct poll_table_struct *wait)
++{
++ unsigned int mask = 0;
++#if defined (WIRELESS)
++ BOARD_IOC *board_ioc = filp->private_data;
++#endif
++
++ poll_wait(filp, &g_board_wait_queue, wait);
++#if defined (WIRELESS)
++ if(board_ioc->eventmask & SES_EVENTS){
++ mask |= sesBtn_poll(filp, wait);
++ }
++#endif
++
++ return mask;
++}
++
++
++static ssize_t board_read(struct file *filp, char __user *buffer, size_t count, loff_t *ppos)
++{
++#if defined (WIRELESS)
++ BOARD_IOC *board_ioc = filp->private_data;
++ if(board_ioc->eventmask & SES_EVENTS){
++ return sesBtn_read(filp, buffer, count, ppos);
++ }
++#endif
++ return 0;
++}
++
++//**************************************************************************************
++// Utitlities for dump memory, free kernel pages, mips soft reset, etc.
++//**************************************************************************************
++
++/***********************************************************************
++ * Function Name: dumpaddr
++ * Description : Display a hex dump of the specified address.
++ ***********************************************************************/
++void dumpaddr( unsigned char *pAddr, int nLen )
++{
++ static char szHexChars[] = "0123456789abcdef";
++ char szLine[80];
++ char *p = szLine;
++ unsigned char ch, *q;
++ int i, j;
++ unsigned long ul;
++
++ while( nLen > 0 )
++ {
++ sprintf( szLine, "%8.8lx: ", (unsigned long) pAddr );
++ p = szLine + strlen(szLine);
++
++ for(i = 0; i < 16 && nLen > 0; i += sizeof(long), nLen -= sizeof(long))
++ {
++ ul = *(unsigned long *) &pAddr[i];
++ q = (unsigned char *) &ul;
++ for( j = 0; j < sizeof(long); j++ )
++ {
++ *p++ = szHexChars[q[j] >> 4];
++ *p++ = szHexChars[q[j] & 0x0f];
++ *p++ = ' ';
++ }
++ }
++
++ for( j = 0; j < 16 - i; j++ )
++ *p++ = ' ', *p++ = ' ', *p++ = ' ';
++
++ *p++ = ' ', *p++ = ' ', *p++ = ' ';
++
++ for( j = 0; j < i; j++ )
++ {
++ ch = pAddr[j];
++ *p++ = (ch > ' ' && ch < '~') ? ch : '.';
++ }
++
++ *p++ = '\0';
++ printk( "%s\r\n", szLine );
++
++ pAddr += i;
++ }
++ printk( "\r\n" );
++} /* dumpaddr */
++
++
++void kerSysMipsSoftReset(void)
++{
++#if defined(CONFIG_BCM96348)
++ if (PERF->RevID == 0x634800A1) {
++ typedef void (*FNPTR) (void);
++ FNPTR bootaddr = (FNPTR) FLASH_BASE;
++ int i;
++
++ /* Disable interrupts. */
++ cli();
++
++ /* Reset all blocks. */
++ PERF->BlockSoftReset &= ~BSR_ALL_BLOCKS;
++ for( i = 0; i < 1000000; i++ )
++ ;
++ PERF->BlockSoftReset |= BSR_ALL_BLOCKS;
++ /* Jump to the power on address. */
++ (*bootaddr) ();
++ }
++ else
++ PERF->pll_control |= SOFT_RESET; // soft reset mips
++#else
++ PERF->pll_control |= SOFT_RESET; // soft reset mips
++#endif
++}
++
++
++int kerSysGetMacAddress( unsigned char *pucaMacAddr, unsigned long ulId )
++{
++ int nRet = 0;
++ PMAC_ADDR_INFO pMai = NULL;
++ PMAC_ADDR_INFO pMaiFreeNoId = NULL;
++ PMAC_ADDR_INFO pMaiFreeId = NULL;
++ unsigned long i = 0, ulIdxNoId = 0, ulIdxId = 0, shiftedIdx = 0;
++
++ for( i = 0, pMai = g_pNvramInfo->MacAddrs; i < g_pNvramInfo->ulNumMacAddrs;
++ i++, pMai++ )
++ {
++ if( ulId == pMai->ulId || ulId == MAC_ADDRESS_ANY )
++ {
++ /* This MAC address has been used by the caller in the past. */
++ memcpy( pucaMacAddr, g_pNvramInfo->ucaBaseMacAddr,
++ NVRAM_MAC_ADDRESS_LEN );
++ shiftedIdx = i;
++ pucaMacAddr[NVRAM_MAC_ADDRESS_LEN - CHANGED_OCTET] += (shiftedIdx << SHIFT_BITS);
++ pMai->chInUse = 1;
++ pMaiFreeNoId = pMaiFreeId = NULL;
++ break;
++ }
++ else
++ if( pMai->chInUse == 0 )
++ {
++ if( pMai->ulId == 0 && pMaiFreeNoId == NULL )
++ {
++ /* This is an available MAC address that has never been
++ * used.
++ */
++ pMaiFreeNoId = pMai;
++ ulIdxNoId = i;
++ }
++ else
++ if( pMai->ulId != 0 && pMaiFreeId == NULL )
++ {
++ /* This is an available MAC address that has been used
++ * before. Use addresses that have never been used
++ * first, before using this one.
++ */
++ pMaiFreeId = pMai;
++ ulIdxId = i;
++ }
++ }
++ }
++
++ if( pMaiFreeNoId || pMaiFreeId )
++ {
++ /* An available MAC address was found. */
++ memcpy(pucaMacAddr, g_pNvramInfo->ucaBaseMacAddr,NVRAM_MAC_ADDRESS_LEN);
++ if( pMaiFreeNoId )
++ {
++ shiftedIdx = ulIdxNoId;
++ pucaMacAddr[NVRAM_MAC_ADDRESS_LEN - CHANGED_OCTET] += (shiftedIdx << SHIFT_BITS);
++ pMaiFreeNoId->ulId = ulId;
++ pMaiFreeNoId->chInUse = 1;
++ }
++ else
++ {
++ shiftedIdx = ulIdxId;
++ pucaMacAddr[NVRAM_MAC_ADDRESS_LEN - CHANGED_OCTET] += (shiftedIdx << SHIFT_BITS);
++ pMaiFreeId->ulId = ulId;
++ pMaiFreeId->chInUse = 1;
++ }
++ }
++ else
++ if( i == g_pNvramInfo->ulNumMacAddrs )
++ nRet = -EADDRNOTAVAIL;
++
++ return( nRet );
++} /* kerSysGetMacAddr */
++
++int kerSysReleaseMacAddress( unsigned char *pucaMacAddr )
++{
++ int nRet = -EINVAL;
++ unsigned long ulIdx = 0;
++ int idx = (pucaMacAddr[NVRAM_MAC_ADDRESS_LEN - CHANGED_OCTET] -
++ g_pNvramInfo->ucaBaseMacAddr[NVRAM_MAC_ADDRESS_LEN - CHANGED_OCTET]);
++
++ // if overflow 255 (negitive), add 256 to have the correct index
++ if (idx < 0)
++ idx += 256;
++ ulIdx = (unsigned long) (idx >> SHIFT_BITS);
++
++ if( ulIdx < g_pNvramInfo->ulNumMacAddrs )
++ {
++ PMAC_ADDR_INFO pMai = &g_pNvramInfo->MacAddrs[ulIdx];
++ if( pMai->chInUse == 1 )
++ {
++ pMai->chInUse = 0;
++ nRet = 0;
++ }
++ }
++
++ return( nRet );
++} /* kerSysReleaseMacAddr */
++
++int kerSysGetSdramSize( void )
++{
++ return( (int) g_pNvramInfo->ulSdramSize );
++} /* kerSysGetSdramSize */
++
++
++void kerSysLedCtrl(BOARD_LED_NAME ledName, BOARD_LED_STATE ledState)
++{
++ if (g_ledInitialized)
++ boardLedCtrl(ledName, ledState);
++}
++
++unsigned int kerSysMonitorPollHook( struct file *f, struct poll_table_struct *t)
++{
++ int mask = (*g_orig_fop_poll) (f, t);
++
++ if( g_wakeup_monitor == 1 && g_monitor_file == f )
++ {
++ /* If g_wakeup_monitor is non-0, the user mode application needs to
++ * return from a blocking select function. Return POLLPRI which will
++ * cause the select to return with the exception descriptor set.
++ */
++ mask |= POLLPRI;
++ g_wakeup_monitor = 0;
++ }
++
++ return( mask );
++}
++
++/* Put the user mode application that monitors link state on a run queue. */
++void kerSysWakeupMonitorTask( void )
++{
++ g_wakeup_monitor = 1;
++ if( g_monitor_task )
++ wake_up_process( g_monitor_task );
++}
++
++//********************************************************************************************
++// misc. ioctl calls come to here. (flash, led, reset, kernel memory access, etc.)
++//********************************************************************************************
++static int board_ioctl( struct inode *inode, struct file *flip,
++ unsigned int command, unsigned long arg )
++{
++ int ret = 0;
++ BOARD_IOCTL_PARMS ctrlParms;
++ unsigned char ucaMacAddr[NVRAM_MAC_ADDRESS_LEN];
++ int allowedSize;
++
++ switch (command)
++ {
++ case BOARD_IOCTL_FLASH_INIT:
++ // not used for now. kerSysBcmImageInit();
++ break;
++
++
++ case BOARD_IOCTL_FLASH_WRITE:
++ if (copy_from_user((void*)&ctrlParms, (void*)arg, sizeof(ctrlParms)) == 0)
++ {
++ NVRAM_DATA SaveNvramData;
++ PNVRAM_DATA pNvramData = (PNVRAM_DATA) get_nvram_start_addr();
++
++ switch (ctrlParms.action)
++ {
++ case SCRATCH_PAD:
++ ret = kerSysScratchPadSet(ctrlParms.string, ctrlParms.buf, ctrlParms.offset);
++ break;
++
++ case PERSISTENT:
++ ret = kerSysPersistentSet(ctrlParms.string, ctrlParms.strLen, ctrlParms.offset);
++ break;
++
++ case NVRAM:
++ ret = kerSysNvRamSet(ctrlParms.string, ctrlParms.strLen, ctrlParms.offset);
++ break;
++
++ case BCM_IMAGE_CFE:
++ if( ctrlParms.strLen <= 0 || ctrlParms.strLen > FLASH45_LENGTH_BOOT_ROM )
++ {
++ printk("Illegal CFE size [%d]. Size allowed: [%d]\n",
++ ctrlParms.strLen, FLASH45_LENGTH_BOOT_ROM);
++ ret = -1;
++ break;
++ }
++
++ // save NVRAM data into a local structure
++ memcpy( &SaveNvramData, pNvramData, sizeof(NVRAM_DATA) );
++
++ // set memory type field
++ BpGetSdramSize( (unsigned long *) &ctrlParms.string[SDRAM_TYPE_ADDRESS_OFFSET] );
++
++ ret = kerSysBcmImageSet(ctrlParms.offset, ctrlParms.string, ctrlParms.strLen);
++
++ // if nvram is not valid, restore the current nvram settings
++ if( BpSetBoardId( pNvramData->szBoardId ) != BP_SUCCESS &&
++ *(unsigned long *) pNvramData == NVRAM_DATA_ID )
++ {
++ kerSysNvRamSet((char *) &SaveNvramData, sizeof(SaveNvramData), 0);
++ }
++ break;
++
++ case BCM_IMAGE_FS:
++ allowedSize = (int) flash_get_total_size() - \
++ FLASH_RESERVED_AT_END - TAG_LEN - FLASH45_LENGTH_BOOT_ROM;
++ if( ctrlParms.strLen <= 0 || ctrlParms.strLen > allowedSize)
++ {
++ printk("Illegal root file system size [%d]. Size allowed: [%d]\n",
++ ctrlParms.strLen, allowedSize);
++ ret = -1;
++ break;
++ }
++ ret = kerSysBcmImageSet(ctrlParms.offset, ctrlParms.string, ctrlParms.strLen);
++ kerSysMipsSoftReset();
++ break;
++
++ case BCM_IMAGE_KERNEL: // not used for now.
++ break;
++ case BCM_IMAGE_WHOLE:
++ if(ctrlParms.strLen <= 0)
++ {
++ printk("Illegal flash image size [%d].\n", ctrlParms.strLen);
++ ret = -1;
++ break;
++ }
++
++ // save NVRAM data into a local structure
++ memcpy( &SaveNvramData, pNvramData, sizeof(NVRAM_DATA) );
++
++ ret = kerSysBcmImageSet(ctrlParms.offset, ctrlParms.string, ctrlParms.strLen);
++
++ // if nvram is not valid, restore the current nvram settings
++ if( BpSetBoardId( pNvramData->szBoardId ) != BP_SUCCESS &&
++ *(unsigned long *) pNvramData == NVRAM_DATA_ID )
++ {
++ kerSysNvRamSet((char *) &SaveNvramData, sizeof(SaveNvramData), 0);
++ }
++
++ kerSysMipsSoftReset();
++ break;
++
++ default:
++ ret = -EINVAL;
++ printk("flash_ioctl_command: invalid command %d\n", ctrlParms.action);
++ break;
++ }
++ ctrlParms.result = ret;
++ __copy_to_user((BOARD_IOCTL_PARMS*)arg, &ctrlParms, sizeof(BOARD_IOCTL_PARMS));
++ }
++ else
++ ret = -EFAULT;
++ break;
++
++ case BOARD_IOCTL_FLASH_READ:
++ if (copy_from_user((void*)&ctrlParms, (void*)arg, sizeof(ctrlParms)) == 0)
++ {
++ switch (ctrlParms.action)
++ {
++ case SCRATCH_PAD:
++ ret = kerSysScratchPadGet(ctrlParms.string, ctrlParms.buf, ctrlParms.offset);
++ break;
++
++ case PERSISTENT:
++ ret = kerSysPersistentGet(ctrlParms.string, ctrlParms.strLen, ctrlParms.offset);
++ break;
++
++ case NVRAM:
++ ret = kerSysNvRamGet(ctrlParms.string, ctrlParms.strLen, ctrlParms.offset);
++ break;
++
++ case FLASH_SIZE:
++ ret = kerSysFlashSizeGet();
++ break;
++
++ default:
++ ret = -EINVAL;
++ printk("Not supported. invalid command %d\n", ctrlParms.action);
++ break;
++ }
++ ctrlParms.result = ret;
++ __copy_to_user((BOARD_IOCTL_PARMS*)arg, &ctrlParms, sizeof(BOARD_IOCTL_PARMS));
++ }
++ else
++ ret = -EFAULT;
++ break;
++
++ case BOARD_IOCTL_GET_NR_PAGES:
++ ctrlParms.result = nr_free_pages() + get_page_cache_size();
++ __copy_to_user((BOARD_IOCTL_PARMS*)arg, &ctrlParms, sizeof(BOARD_IOCTL_PARMS));
++ ret = 0;
++ break;
++
++ case BOARD_IOCTL_DUMP_ADDR:
++ if (copy_from_user((void*)&ctrlParms, (void*)arg, sizeof(ctrlParms)) == 0)
++ {
++ dumpaddr( (unsigned char *) ctrlParms.string, ctrlParms.strLen );
++ ctrlParms.result = 0;
++ __copy_to_user((BOARD_IOCTL_PARMS*)arg, &ctrlParms, sizeof(BOARD_IOCTL_PARMS));
++ ret = 0;
++ }
++ else
++ ret = -EFAULT;
++ break;
++
++ case BOARD_IOCTL_SET_MEMORY:
++ if (copy_from_user((void*)&ctrlParms, (void*)arg, sizeof(ctrlParms)) == 0)
++ {
++ unsigned long *pul = (unsigned long *) ctrlParms.string;
++ unsigned short *pus = (unsigned short *) ctrlParms.string;
++ unsigned char *puc = (unsigned char *) ctrlParms.string;
++ switch( ctrlParms.strLen )
++ {
++ case 4:
++ *pul = (unsigned long) ctrlParms.offset;
++ break;
++ case 2:
++ *pus = (unsigned short) ctrlParms.offset;
++ break;
++ case 1:
++ *puc = (unsigned char) ctrlParms.offset;
++ break;
++ }
++ dumpaddr( (unsigned char *) ctrlParms.string, sizeof(long) );
++ ctrlParms.result = 0;
++ __copy_to_user((BOARD_IOCTL_PARMS*)arg, &ctrlParms, sizeof(BOARD_IOCTL_PARMS));
++ ret = 0;
++ }
++ else
++ ret = -EFAULT;
++ break;
++
++ case BOARD_IOCTL_MIPS_SOFT_RESET:
++ kerSysMipsSoftReset();
++ break;
++
++ case BOARD_IOCTL_LED_CTRL:
++ if (copy_from_user((void*)&ctrlParms, (void*)arg, sizeof(ctrlParms)) == 0)
++ {
++ kerSysLedCtrl((BOARD_LED_NAME)ctrlParms.strLen, (BOARD_LED_STATE)ctrlParms.offset);
++ ret = 0;
++ }
++ break;
++
++ case BOARD_IOCTL_GET_ID:
++ if (copy_from_user((void*)&ctrlParms, (void*)arg,
++ sizeof(ctrlParms)) == 0)
++ {
++ if( ctrlParms.string )
++ {
++ char *p = (char *) get_system_type();
++ if( strlen(p) + 1 < ctrlParms.strLen )
++ ctrlParms.strLen = strlen(p) + 1;
++ __copy_to_user(ctrlParms.string, p, ctrlParms.strLen);
++ }
++
++ ctrlParms.result = 0;
++ __copy_to_user((BOARD_IOCTL_PARMS*)arg, &ctrlParms,
++ sizeof(BOARD_IOCTL_PARMS));
++ }
++ break;
++
++ case BOARD_IOCTL_GET_MAC_ADDRESS:
++ if (copy_from_user((void*)&ctrlParms, (void*)arg, sizeof(ctrlParms)) == 0)
++ {
++ ctrlParms.result = kerSysGetMacAddress( ucaMacAddr,
++ ctrlParms.offset );
++
++ if( ctrlParms.result == 0 )
++ {
++ __copy_to_user(ctrlParms.string, ucaMacAddr,
++ sizeof(ucaMacAddr));
++ }
++
++ __copy_to_user((BOARD_IOCTL_PARMS*)arg, &ctrlParms,
++ sizeof(BOARD_IOCTL_PARMS));
++ ret = 0;
++ }
++ else
++ ret = -EFAULT;
++ break;
++
++ case BOARD_IOCTL_RELEASE_MAC_ADDRESS:
++ if (copy_from_user((void*)&ctrlParms, (void*)arg, sizeof(ctrlParms)) == 0)
++ {
++ if (copy_from_user((void*)ucaMacAddr, (void*)ctrlParms.string, \
++ NVRAM_MAC_ADDRESS_LEN) == 0)
++ {
++ ctrlParms.result = kerSysReleaseMacAddress( ucaMacAddr );
++ }
++ else
++ {
++ ctrlParms.result = -EACCES;
++ }
++
++ __copy_to_user((BOARD_IOCTL_PARMS*)arg, &ctrlParms,
++ sizeof(BOARD_IOCTL_PARMS));
++ ret = 0;
++ }
++ else
++ ret = -EFAULT;
++ break;
++
++ case BOARD_IOCTL_GET_PSI_SIZE:
++ ctrlParms.result = (int) g_pNvramInfo->ulPsiSize;
++ __copy_to_user((BOARD_IOCTL_PARMS*)arg, &ctrlParms, sizeof(BOARD_IOCTL_PARMS));
++ ret = 0;
++ break;
++
++ case BOARD_IOCTL_GET_SDRAM_SIZE:
++ ctrlParms.result = (int) g_pNvramInfo->ulSdramSize;
++ __copy_to_user((BOARD_IOCTL_PARMS*)arg, &ctrlParms, sizeof(BOARD_IOCTL_PARMS));
++ ret = 0;
++ break;
++
++ case BOARD_IOCTL_GET_BASE_MAC_ADDRESS:
++ if (copy_from_user((void*)&ctrlParms, (void*)arg, sizeof(ctrlParms)) == 0)
++ {
++ __copy_to_user(ctrlParms.string, g_pNvramInfo->ucaBaseMacAddr, NVRAM_MAC_ADDRESS_LEN);
++ ctrlParms.result = 0;
++
++ __copy_to_user((BOARD_IOCTL_PARMS*)arg, &ctrlParms,
++ sizeof(BOARD_IOCTL_PARMS));
++ ret = 0;
++ }
++ else
++ ret = -EFAULT;
++ break;
++
++ case BOARD_IOCTL_GET_CHIP_ID:
++ ctrlParms.result = (int) (PERF->RevID & 0xFFFF0000) >> 16;
++ __copy_to_user((BOARD_IOCTL_PARMS*)arg, &ctrlParms, sizeof(BOARD_IOCTL_PARMS));
++ ret = 0;
++ break;
++
++ case BOARD_IOCTL_GET_NUM_ENET: {
++ ETHERNET_MAC_INFO EnetInfos[BP_MAX_ENET_MACS];
++ int i, numeth = 0;
++ if (BpGetEthernetMacInfo(EnetInfos, BP_MAX_ENET_MACS) == BP_SUCCESS) {
++ for( i = 0; i < BP_MAX_ENET_MACS; i++) {
++ if (EnetInfos[i].ucPhyType != BP_ENET_NO_PHY) {
++ numeth++;
++ }
++ }
++ ctrlParms.result = numeth;
++ __copy_to_user((BOARD_IOCTL_PARMS*)arg, &ctrlParms, sizeof(BOARD_IOCTL_PARMS));
++ ret = 0;
++ }
++ else {
++ ret = -EFAULT;
++ }
++ break;
++ }
++
++ case BOARD_IOCTL_GET_CFE_VER:
++ if (copy_from_user((void*)&ctrlParms, (void*)arg, sizeof(ctrlParms)) == 0) {
++ char *vertag = (char *)(FLASH_BASE + CFE_VERSION_OFFSET);
++ if (ctrlParms.strLen < CFE_VERSION_SIZE) {
++ ctrlParms.result = 0;
++ __copy_to_user((BOARD_IOCTL_PARMS*)arg, &ctrlParms, sizeof(BOARD_IOCTL_PARMS));
++ ret = -EFAULT;
++ }
++ else if (strncmp(vertag, "cfe-v", 5)) { // no tag info in flash
++ ctrlParms.result = 0;
++ __copy_to_user((BOARD_IOCTL_PARMS*)arg, &ctrlParms, sizeof(BOARD_IOCTL_PARMS));
++ ret = 0;
++ }
++ else {
++ ctrlParms.result = 1;
++ __copy_to_user(ctrlParms.string, vertag+CFE_VERSION_MARK_SIZE, CFE_VERSION_SIZE);
++ __copy_to_user((BOARD_IOCTL_PARMS*)arg, &ctrlParms, sizeof(BOARD_IOCTL_PARMS));
++ ret = 0;
++ }
++ }
++ else {
++ ret = -EFAULT;
++ }
++ break;
++
++ case BOARD_IOCTL_GET_ENET_CFG:
++ if (copy_from_user((void*)&ctrlParms, (void*)arg, sizeof(ctrlParms)) == 0) {
++ ETHERNET_MAC_INFO EnetInfos[BP_MAX_ENET_MACS];
++ if (BpGetEthernetMacInfo(EnetInfos, BP_MAX_ENET_MACS) == BP_SUCCESS) {
++ if (ctrlParms.strLen == sizeof(EnetInfos)) {
++ __copy_to_user(ctrlParms.string, EnetInfos, sizeof(EnetInfos));
++ ctrlParms.result = 0;
++ __copy_to_user((BOARD_IOCTL_PARMS*)arg, &ctrlParms, sizeof(BOARD_IOCTL_PARMS));
++ ret = 0;
++ } else
++ ret = -EFAULT;
++ }
++ else {
++ ret = -EFAULT;
++ }
++ break;
++ }
++ else {
++ ret = -EFAULT;
++ }
++ break;
++
++#if defined (WIRELESS)
++ case BOARD_IOCTL_GET_WLAN_ANT_INUSE:
++ if (copy_from_user((void*)&ctrlParms, (void*)arg, sizeof(ctrlParms)) == 0) {
++ unsigned short antInUse = 0;
++ if (BpGetWirelessAntInUse(&antInUse) == BP_SUCCESS) {
++ if (ctrlParms.strLen == sizeof(antInUse)) {
++ __copy_to_user(ctrlParms.string, &antInUse, sizeof(antInUse));
++ ctrlParms.result = 0;
++ __copy_to_user((BOARD_IOCTL_PARMS*)arg, &ctrlParms, sizeof(BOARD_IOCTL_PARMS));
++ ret = 0;
++ } else
++ ret = -EFAULT;
++ }
++ else {
++ ret = -EFAULT;
++ }
++ break;
++ }
++ else {
++ ret = -EFAULT;
++ }
++ break;
++#endif
++ case BOARD_IOCTL_SET_TRIGGER_EVENT:
++ if (copy_from_user((void*)&ctrlParms, (void*)arg, sizeof(ctrlParms)) == 0) {
++ BOARD_IOC *board_ioc = (BOARD_IOC *)flip->private_data;
++ ctrlParms.result = -EFAULT;
++ ret = -EFAULT;
++ if (ctrlParms.strLen == sizeof(unsigned long)) {
++ board_ioc->eventmask |= *((int*)ctrlParms.string);
++#if defined (WIRELESS)
++ if((board_ioc->eventmask & SES_EVENTS)) {
++ if(sesBtn_irq != BP_NOT_DEFINED) {
++ BcmHalInterruptEnable(sesBtn_irq);
++ ctrlParms.result = 0;
++ ret = 0;
++ }
++ }
++#endif
++ __copy_to_user((BOARD_IOCTL_PARMS*)arg, &ctrlParms, sizeof(BOARD_IOCTL_PARMS));
++ }
++ break;
++ }
++ else {
++ ret = -EFAULT;
++ }
++ break;
++
++ case BOARD_IOCTL_GET_TRIGGER_EVENT:
++ if (copy_from_user((void*)&ctrlParms, (void*)arg, sizeof(ctrlParms)) == 0) {
++ BOARD_IOC *board_ioc = (BOARD_IOC *)flip->private_data;
++ if (ctrlParms.strLen == sizeof(unsigned long)) {
++ __copy_to_user(ctrlParms.string, &board_ioc->eventmask, sizeof(unsigned long));
++ ctrlParms.result = 0;
++ __copy_to_user((BOARD_IOCTL_PARMS*)arg, &ctrlParms, sizeof(BOARD_IOCTL_PARMS));
++ ret = 0;
++ } else
++ ret = -EFAULT;
++
++ break;
++ }
++ else {
++ ret = -EFAULT;
++ }
++ break;
++
++ case BOARD_IOCTL_UNSET_TRIGGER_EVENT:
++ if (copy_from_user((void*)&ctrlParms, (void*)arg, sizeof(ctrlParms)) == 0) {
++ if (ctrlParms.strLen == sizeof(unsigned long)) {
++ BOARD_IOC *board_ioc = (BOARD_IOC *)flip->private_data;
++ board_ioc->eventmask &= (~(*((int*)ctrlParms.string)));
++ ctrlParms.result = 0;
++ __copy_to_user((BOARD_IOCTL_PARMS*)arg, &ctrlParms, sizeof(BOARD_IOCTL_PARMS));
++ ret = 0;
++ } else
++ ret = -EFAULT;
++
++ break;
++ }
++ else {
++ ret = -EFAULT;
++ }
++ break;
++#if defined (WIRELESS)
++ case BOARD_IOCTL_SET_SES_LED:
++ if (copy_from_user((void*)&ctrlParms, (void*)arg, sizeof(ctrlParms)) == 0) {
++ if (ctrlParms.strLen == sizeof(int)) {
++ sesLed_ctrl(*(int*)ctrlParms.string);
++ ctrlParms.result = 0;
++ __copy_to_user((BOARD_IOCTL_PARMS*)arg, &ctrlParms, sizeof(BOARD_IOCTL_PARMS));
++ ret = 0;
++ } else
++ ret = -EFAULT;
++
++ break;
++ }
++ else {
++ ret = -EFAULT;
++ }
++ break;
++#endif
++
++ case BOARD_IOCTL_SET_MONITOR_FD:
++ if (copy_from_user((void*)&ctrlParms, (void*)arg, sizeof(ctrlParms)) == 0) {
++ int fput_needed = 0;
++
++ g_monitor_file = fget_light( ctrlParms.offset, &fput_needed );
++ if( g_monitor_file ) {
++ /* Hook this file descriptor's poll function in order to set
++ * the exception descriptor when there is a change in link
++ * state.
++ */
++ g_monitor_task = current;
++ g_orig_fop_poll = g_monitor_file->f_op->poll;
++ g_monitor_file->f_op->poll = kerSysMonitorPollHook;
++ }
++ }
++ break;
++
++ case BOARD_IOCTL_WAKEUP_MONITOR_TASK:
++ kerSysWakeupMonitorTask();
++ break;
++
++ default:
++ ret = -EINVAL;
++ ctrlParms.result = 0;
++ printk("board_ioctl: invalid command %x, cmd %d .\n",command,_IOC_NR(command));
++ break;
++
++ } /* switch */
++
++ return (ret);
++
++} /* board_ioctl */
++
++/***************************************************************************
++ * SES Button ISR/GPIO/LED functions.
++ ***************************************************************************/
++#if defined (WIRELESS)
++static irqreturn_t sesBtn_isr(int irq, void *dev_id, struct pt_regs *ptregs)
++{
++#if defined(_BCM96338_) || defined(CONFIG_BCM96338)
++ unsigned long gpio_mask = GPIO_NUM_TO_MASK(sesBtn_gpio);
++ volatile unsigned long *gpio_reg = &GPIO->GPIOio;
++#endif
++#if defined(_BCM96345_) || defined(CONFIG_BCM96345)
++ unsigned short gpio_mask = GPIO_NUM_TO_MASK(sesBtn_gpio);
++ volatile unsigned short *gpio_reg = &GPIO->GPIOio;
++#endif
++#if defined(_BCM96348_) || defined (CONFIG_BCM96348)
++ unsigned long gpio_mask = GPIO_NUM_TO_MASK(sesBtn_gpio);
++ volatile unsigned long *gpio_reg = &GPIO->GPIOio;
++
++ if( (sesBtn_gpio & ~BP_ACTIVE_MASK) >= 32 )
++ {
++ gpio_mask = GPIO_NUM_TO_MASK_HIGH(sesBtn_gpio);
++ gpio_reg = &GPIO->GPIOio_high;
++ }
++#endif
++
++ if (!(*gpio_reg & gpio_mask)){
++ wake_up_interruptible(&g_board_wait_queue);
++ return IRQ_RETVAL(1);
++ } else {
++ return IRQ_RETVAL(0);
++ }
++}
++
++static void __init sesBtn_mapGpio()
++{
++ if( BpGetWirelessSesBtnGpio(&sesBtn_gpio) == BP_SUCCESS )
++ {
++ printk("SES: Button GPIO 0x%x is enabled\n", sesBtn_gpio);
++ }
++}
++
++static void __init sesBtn_mapIntr(int context)
++{
++ if( BpGetWirelessSesExtIntr(&sesBtn_irq) == BP_SUCCESS )
++ {
++ printk("SES: Button Interrupt 0x%x is enabled\n", sesBtn_irq);
++ }
++ else
++ return;
++
++ sesBtn_irq += INTERRUPT_ID_EXTERNAL_0;
++
++ if (BcmHalMapInterrupt((FN_HANDLER)sesBtn_isr, context, sesBtn_irq)) {
++ printk("SES: Interrupt mapping failed\n");
++ }
++ BcmHalInterruptEnable(sesBtn_irq);
++}
++
++
++static unsigned int sesBtn_poll(struct file *file, struct poll_table_struct *wait)
++{
++#if defined(_BCM96338_) || defined(CONFIG_BCM96338)
++ unsigned long gpio_mask = GPIO_NUM_TO_MASK(sesBtn_gpio);
++ volatile unsigned long *gpio_reg = &GPIO->GPIOio;
++#endif
++#if defined(_BCM96345_) || defined(CONFIG_BCM96345)
++ unsigned short gpio_mask = GPIO_NUM_TO_MASK(sesBtn_gpio);
++ volatile unsigned short *gpio_reg = &GPIO->GPIOio;
++#endif
++#if defined(_BCM96348_) || defined (CONFIG_BCM96348)
++ unsigned long gpio_mask = GPIO_NUM_TO_MASK(sesBtn_gpio);
++ volatile unsigned long *gpio_reg = &GPIO->GPIOio;
++
++ if( (sesBtn_gpio & ~BP_ACTIVE_MASK) >= 32 )
++ {
++ gpio_mask = GPIO_NUM_TO_MASK_HIGH(sesBtn_gpio);
++ gpio_reg = &GPIO->GPIOio_high;
++ }
++#endif
++
++ if (!(*gpio_reg & gpio_mask)){
++ return POLLIN;
++ }
++ return 0;
++}
++
++static ssize_t sesBtn_read(struct file *file, char __user *buffer, size_t count, loff_t *ppos)
++{
++ volatile unsigned int event=0;
++ ssize_t ret=0;
++
++#if defined(_BCM96338_) || defined (CONFIG_BCM96338)
++ unsigned long gpio_mask = GPIO_NUM_TO_MASK(sesBtn_gpio);
++ volatile unsigned long *gpio_reg = &GPIO->GPIOio;
++#endif
++#if defined(_BCM96345_) || defined (CONFIG_BCM96345)
++ unsigned short gpio_mask = GPIO_NUM_TO_MASK(sesBtn_gpio);
++ volatile unsigned short *gpio_reg = &GPIO->GPIOio;
++#endif
++#if defined(_BCM96348_) || defined (CONFIG_BCM96348)
++ unsigned long gpio_mask = GPIO_NUM_TO_MASK(sesBtn_gpio);
++ volatile unsigned long *gpio_reg = &GPIO->GPIOio;
++
++ if( (sesBtn_gpio & ~BP_ACTIVE_MASK) >= 32 )
++ {
++ gpio_mask = GPIO_NUM_TO_MASK_HIGH(sesBtn_gpio);
++ gpio_reg = &GPIO->GPIOio_high;
++ }
++#endif
++
++ if(*gpio_reg & gpio_mask){
++ BcmHalInterruptEnable(sesBtn_irq);
++ return ret;
++ }
++ event = SES_EVENTS;
++ __copy_to_user((char*)buffer, (char*)&event, sizeof(event));
++ BcmHalInterruptEnable(sesBtn_irq);
++ count -= sizeof(event);
++ buffer += sizeof(event);
++ ret += sizeof(event);
++ return ret;
++}
++
++static void __init sesLed_mapGpio()
++{
++ if( BpGetWirelessSesBtnGpio(&sesLed_gpio) == BP_SUCCESS )
++ {
++ printk("SES: LED GPIO 0x%x is enabled\n", sesBtn_gpio);
++ }
++}
++
++static void sesLed_ctrl(int action)
++{
++
++ //char status = ((action >> 8) & 0xff); /* extract status */
++ //char event = ((action >> 16) & 0xff); /* extract event */
++ //char blinktype = ((action >> 24) & 0xff); /* extract blink type for SES_LED_BLINK */
++
++ BOARD_LED_STATE led;
++
++ if(sesLed_gpio == BP_NOT_DEFINED)
++ return;
++
++ action &= 0xff; /* extract led */
++
++ //printk("blinktype=%d, event=%d, status=%d\n",(int)blinktype, (int)event, (int)status);
++
++ switch (action)
++ {
++ case SES_LED_ON:
++ //printk("SES: led on\n");
++ led = kLedStateOn;
++ break;
++ case SES_LED_BLINK:
++ //printk("SES: led blink\n");
++ led = kLedStateSlowBlinkContinues;
++ break;
++ case SES_LED_OFF:
++ default:
++ //printk("SES: led off\n");
++ led = kLedStateOff;
++ }
++
++ kerSysLedCtrl(kLedSes, led);
++}
++
++static void __init ses_board_init()
++{
++ sesBtn_mapGpio();
++ sesBtn_mapIntr(0);
++ sesLed_mapGpio();
++}
++static void __exit ses_board_deinit()
++{
++ if(sesBtn_irq)
++ BcmHalInterruptDisable(sesBtn_irq);
++}
++#endif
++
++/***************************************************************************
++ * Dying gasp ISR and functions.
++ ***************************************************************************/
++#define KERSYS_DBG printk
++
++#if defined(CONFIG_BCM96345)
++#define CYCLE_PER_US 70
++#elif defined(CONFIG_BCM96348) || defined(CONFIG_BCM96338)
++/* The BCM6348 cycles per microsecond is really variable since the BCM6348
++ * MIPS speed can vary depending on the PLL settings. However, an appoximate
++ * value of 120 will still work OK for the test being done.
++ */
++#define CYCLE_PER_US 120
++#endif
++#define DG_GLITCH_TO (100*CYCLE_PER_US)
++
++static void __init kerSysDyingGaspMapIntr()
++{
++ unsigned long ulIntr;
++
++#if defined(CONFIG_BCM96348) || defined(_BCM96348_) || defined(CONFIG_BCM96338) || defined(_BCM96338_)
++ if( BpGetAdslDyingGaspExtIntr( &ulIntr ) == BP_SUCCESS ) {
++ BcmHalMapInterrupt((FN_HANDLER)kerSysDyingGaspIsr, 0, INTERRUPT_ID_DG);
++ BcmHalInterruptEnable( INTERRUPT_ID_DG );
++ }
++#elif defined(CONFIG_BCM96345) || defined(_BCM96345_)
++ if( BpGetAdslDyingGaspExtIntr( &ulIntr ) == BP_SUCCESS ) {
++ ulIntr += INTERRUPT_ID_EXTERNAL_0;
++ BcmHalMapInterrupt((FN_HANDLER)kerSysDyingGaspIsr, 0, ulIntr);
++ BcmHalInterruptEnable( ulIntr );
++ }
++#endif
++
++}
++
++void kerSysSetWdTimer(ulong timeUs)
++{
++ TIMER->WatchDogDefCount = timeUs * (FPERIPH/1000000);
++ TIMER->WatchDogCtl = 0xFF00;
++ TIMER->WatchDogCtl = 0x00FF;
++}
++
++ulong kerSysGetCycleCount(void)
++{
++ ulong cnt;
++#ifdef _WIN32_WCE
++ cnt = 0;
++#else
++ __asm volatile("mfc0 %0, $9":"=d"(cnt));
++#endif
++ return(cnt);
++}
++
++static Bool kerSysDyingGaspCheckPowerLoss(void)
++{
++ ulong clk0;
++ ulong ulIntr;
++
++ ulIntr = 0;
++ clk0 = kerSysGetCycleCount();
++
++ UART->Data = 'D';
++ UART->Data = '%';
++ UART->Data = 'G';
++
++#if defined(CONFIG_BCM96345)
++ BpGetAdslDyingGaspExtIntr( &ulIntr );
++
++ do {
++ ulong clk1;
++
++ clk1 = kerSysGetCycleCount(); /* time cleared */
++ /* wait a little to get new reading */
++ while ((kerSysGetCycleCount()-clk1) < CYCLE_PER_US*2)
++ ;
++ } while ((0 == (PERF->ExtIrqCfg & (1 << (ulIntr + EI_STATUS_SHFT)))) && ((kerSysGetCycleCount() - clk0) < DG_GLITCH_TO));
++
++ if (PERF->ExtIrqCfg & (1 << (ulIntr + EI_STATUS_SHFT))) { /* power glitch */
++ BcmHalInterruptEnable( ulIntr + INTERRUPT_ID_EXTERNAL_0);
++ KERSYS_DBG(" - Power glitch detected. Duration: %ld us\n", (kerSysGetCycleCount() - clk0)/CYCLE_PER_US);
++ return 0;
++ }
++#elif (defined(CONFIG_BCM96348) || defined(CONFIG_BCM96338)) && !defined(VXWORKS)
++ do {
++ ulong clk1;
++
++ clk1 = kerSysGetCycleCount(); /* time cleared */
++ /* wait a little to get new reading */
++ while ((kerSysGetCycleCount()-clk1) < CYCLE_PER_US*2)
++ ;
++ } while ((PERF->IrqStatus & (1 << (INTERRUPT_ID_DG - INTERNAL_ISR_TABLE_OFFSET))) && ((kerSysGetCycleCount() - clk0) < DG_GLITCH_TO));
++
++ if (!(PERF->IrqStatus & (1 << (INTERRUPT_ID_DG - INTERNAL_ISR_TABLE_OFFSET)))) {
++ BcmHalInterruptEnable( INTERRUPT_ID_DG );
++ KERSYS_DBG(" - Power glitch detected. Duration: %ld us\n", (kerSysGetCycleCount() - clk0)/CYCLE_PER_US);
++ return 0;
++ }
++#endif
++ return 1;
++}
++
++static void kerSysDyingGaspShutdown( void )
++{
++ kerSysSetWdTimer(1000000);
++#if defined(CONFIG_BCM96345)
++ PERF->blkEnables &= ~(EMAC_CLK_EN | USB_CLK_EN | CPU_CLK_EN);
++#elif defined(CONFIG_BCM96348)
++ PERF->blkEnables &= ~(EMAC_CLK_EN | USBS_CLK_EN | USBH_CLK_EN | SAR_CLK_EN);
++#endif
++}
++
++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0))
++static irqreturn_t kerSysDyingGaspIsr(int irq, void * dev_id, struct pt_regs * regs)
++#else
++static unsigned int kerSysDyingGaspIsr(void)
++#endif
++{
++ struct list_head *pos;
++ CB_DGASP_LIST *tmp, *dsl = NULL;
++
++ if (kerSysDyingGaspCheckPowerLoss()) {
++
++ /* first to turn off everything other than dsl */
++ list_for_each(pos, &g_cb_dgasp_list_head->list) {
++ tmp = list_entry(pos, CB_DGASP_LIST, list);
++ if(strncmp(tmp->name, "dsl", 3)) {
++ (tmp->cb_dgasp_fn)(tmp->context);
++ }else {
++ dsl = tmp;
++ }
++ }
++
++ /* now send dgasp */
++ if(dsl)
++ (dsl->cb_dgasp_fn)(dsl->context);
++
++ /* reset and shutdown system */
++ kerSysDyingGaspShutdown();
++ }
++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0))
++return( IRQ_HANDLED );
++#else
++ return( 1 );
++#endif
++}
++
++static void __init kerSysInitDyingGaspHandler( void )
++{
++ CB_DGASP_LIST *new_node;
++
++ if( g_cb_dgasp_list_head != NULL) {
++ printk("Error: kerSysInitDyingGaspHandler: list head is not null\n");
++ return;
++ }
++ new_node= (CB_DGASP_LIST *)kmalloc(sizeof(CB_DGASP_LIST), GFP_KERNEL);
++ memset(new_node, 0x00, sizeof(CB_DGASP_LIST));
++ INIT_LIST_HEAD(&new_node->list);
++ g_cb_dgasp_list_head = new_node;
++
++} /* kerSysInitDyingGaspHandler */
++
++static void __exit kerSysDeinitDyingGaspHandler( void )
++{
++ struct list_head *pos;
++ CB_DGASP_LIST *tmp;
++
++ if(g_cb_dgasp_list_head == NULL)
++ return;
++
++ list_for_each(pos, &g_cb_dgasp_list_head->list) {
++ tmp = list_entry(pos, CB_DGASP_LIST, list);
++ list_del(pos);
++ kfree(tmp);
++ }
++
++ kfree(g_cb_dgasp_list_head);
++ g_cb_dgasp_list_head = NULL;
++
++} /* kerSysDeinitDyingGaspHandler */
++
++void kerSysRegisterDyingGaspHandler(char *devname, void *cbfn, void *context)
++{
++ CB_DGASP_LIST *new_node;
++
++ if( g_cb_dgasp_list_head == NULL) {
++ printk("Error: kerSysRegisterDyingGaspHandler: list head is null\n");
++ return;
++ }
++
++ if( devname == NULL || cbfn == NULL ) {
++ printk("Error: kerSysRegisterDyingGaspHandler: register info not enough (%s,%x,%x)\n", devname, (unsigned int)cbfn, (unsigned int)context);
++ return;
++ }
++
++ new_node= (CB_DGASP_LIST *)kmalloc(sizeof(CB_DGASP_LIST), GFP_KERNEL);
++ memset(new_node, 0x00, sizeof(CB_DGASP_LIST));
++ INIT_LIST_HEAD(&new_node->list);
++ strncpy(new_node->name, devname, IFNAMSIZ);
++ new_node->cb_dgasp_fn = (cb_dgasp_t)cbfn;
++ new_node->context = context;
++ list_add(&new_node->list, &g_cb_dgasp_list_head->list);
++
++ printk("dgasp: kerSysRegisterDyingGaspHandler: %s registered \n", devname);
++
++} /* kerSysRegisterDyingGaspHandler */
++
++void kerSysDeregisterDyingGaspHandler(char *devname)
++{
++ struct list_head *pos;
++ CB_DGASP_LIST *tmp;
++
++ if(g_cb_dgasp_list_head == NULL) {
++ printk("Error: kerSysDeregisterDyingGaspHandler: list head is null\n");
++ return;
++ }
++
++ if(devname == NULL) {
++ printk("Error: kerSysDeregisterDyingGaspHandler: devname is null\n");
++ return;
++ }
++
++ printk("kerSysDeregisterDyingGaspHandler: %s is deregistering\n", devname);
++
++ list_for_each(pos, &g_cb_dgasp_list_head->list) {
++ tmp = list_entry(pos, CB_DGASP_LIST, list);
++ if(!strcmp(tmp->name, devname)) {
++ list_del(pos);
++ kfree(tmp);
++ printk("kerSysDeregisterDyingGaspHandler: %s is deregistered\n", devname);
++ return;
++ }
++ }
++ printk("kerSysDeregisterDyingGaspHandler: %s not (de)registered\n", devname);
++
++} /* kerSysDeregisterDyingGaspHandler */
++
++/***************************************************************************
++ * MACRO to call driver initialization and cleanup functions.
++ ***************************************************************************/
++module_init( brcm_board_init );
++module_exit( brcm_board_cleanup );
++
++EXPORT_SYMBOL(kerSysNvRamGet);
++EXPORT_SYMBOL(dumpaddr);
++EXPORT_SYMBOL(kerSysGetMacAddress);
++EXPORT_SYMBOL(kerSysReleaseMacAddress);
++EXPORT_SYMBOL(kerSysGetSdramSize);
++EXPORT_SYMBOL(kerSysLedCtrl);
++EXPORT_SYMBOL(kerSysLedRegisterHwHandler);
++EXPORT_SYMBOL(BpGetBoardIds);
++EXPORT_SYMBOL(BpGetSdramSize);
++EXPORT_SYMBOL(BpGetPsiSize);
++EXPORT_SYMBOL(BpGetEthernetMacInfo);
++EXPORT_SYMBOL(BpGetRj11InnerOuterPairGpios);
++EXPORT_SYMBOL(BpGetPressAndHoldResetGpio);
++EXPORT_SYMBOL(BpGetVoipResetGpio);
++EXPORT_SYMBOL(BpGetVoipIntrGpio);
++EXPORT_SYMBOL(BpGetPcmciaResetGpio);
++EXPORT_SYMBOL(BpGetRtsCtsUartGpios);
++EXPORT_SYMBOL(BpGetAdslLedGpio);
++EXPORT_SYMBOL(BpGetAdslFailLedGpio);
++EXPORT_SYMBOL(BpGetWirelessLedGpio);
++EXPORT_SYMBOL(BpGetUsbLedGpio);
++EXPORT_SYMBOL(BpGetHpnaLedGpio);
++EXPORT_SYMBOL(BpGetWanDataLedGpio);
++EXPORT_SYMBOL(BpGetPppLedGpio);
++EXPORT_SYMBOL(BpGetPppFailLedGpio);
++EXPORT_SYMBOL(BpGetVoipLedGpio);
++EXPORT_SYMBOL(BpGetWirelessExtIntr);
++EXPORT_SYMBOL(BpGetAdslDyingGaspExtIntr);
++EXPORT_SYMBOL(BpGetVoipExtIntr);
++EXPORT_SYMBOL(BpGetHpnaExtIntr);
++EXPORT_SYMBOL(BpGetHpnaChipSelect);
++EXPORT_SYMBOL(BpGetVoipChipSelect);
++EXPORT_SYMBOL(BpGetWirelessSesBtnGpio);
++EXPORT_SYMBOL(BpGetWirelessSesExtIntr);
++EXPORT_SYMBOL(BpGetWirelessSesLedGpio);
++EXPORT_SYMBOL(kerSysRegisterDyingGaspHandler);
++EXPORT_SYMBOL(kerSysDeregisterDyingGaspHandler);
++EXPORT_SYMBOL(kerSysGetCycleCount);
++EXPORT_SYMBOL(kerSysSetWdTimer);
++EXPORT_SYMBOL(kerSysWakeupMonitorTask);
++
+diff -urN linux-2.6.8.1/bcmdrivers/opensource/char/board/bcm963xx/impl1/cfiflash.c linux-2.6.8.1-brcm63xx/bcmdrivers/opensource/char/board/bcm963xx/impl1/cfiflash.c
+--- linux-2.6.8.1/bcmdrivers/opensource/char/board/bcm963xx/impl1/cfiflash.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.8.1-brcm63xx/bcmdrivers/opensource/char/board/bcm963xx/impl1/cfiflash.c 2006-06-26 09:07:10.000000000 +0200
+@@ -0,0 +1,692 @@
++/************************************************************************/
++/* */
++/* AMD CFI Enabled Flash Memory Drivers */
++/* File name: CFIFLASH.C */
++/* Revision: 1.0 5/07/98 */
++/* */
++/* Copyright (c) 1998 ADVANCED MICRO DEVICES, INC. All Rights Reserved. */
++/* This software is unpublished and contains the trade secrets and */
++/* confidential proprietary information of AMD. Unless otherwise */
++/* provided in the Software Agreement associated herewith, it is */
++/* licensed in confidence "AS IS" and is not to be reproduced in whole */
++/* or part by any means except for backup. Use, duplication, or */
++/* disclosure by the Government is subject to the restrictions in */
++/* paragraph (b) (3) (B) of the Rights in Technical Data and Computer */
++/* Software clause in DFAR 52.227-7013 (a) (Oct 1988). */
++/* Software owned by */
++/* Advanced Micro Devices, Inc., */
++/* One AMD Place, */
++/* P.O. Box 3453 */
++/* Sunnyvale, CA 94088-3453. */
++/************************************************************************/
++/* This software constitutes a basic shell of source code for */
++/* programming all AMD Flash components. AMD */
++/* will not be responsible for misuse or illegal use of this */
++/* software for devices not supported herein. AMD is providing */
++/* this source code "AS IS" and will not be responsible for */
++/* issues arising from incorrect user implementation of the */
++/* source code herein. It is the user's responsibility to */
++/* properly design-in this source code. */
++/* */
++/************************************************************************/
++#ifdef _CFE_
++#include "lib_types.h"
++#include "lib_printf.h"
++#include "lib_string.h"
++#include "cfe_timer.h"
++#define printk printf
++#else // linux
++#include <linux/param.h>
++#include <linux/sched.h>
++#include <linux/timer.h>
++#endif
++
++#include "cfiflash.h"
++
++static int flash_wait(WORD sector, int offset, UINT16 data);
++static UINT16 flash_get_device_id(void);
++static int flash_get_cfi(struct cfi_query *query, UINT16 *cfi_struct, int flashFamily);
++static int flash_write(WORD sector, int offset, byte *buf, int nbytes);
++static void flash_command(int command, WORD sector, int offset, UINT16 data);
++
++/*********************************************************************/
++/* 'meminfo' should be a pointer, but most C compilers will not */
++/* allocate static storage for a pointer without calling */
++/* non-portable functions such as 'new'. We also want to avoid */
++/* the overhead of passing this pointer for every driver call. */
++/* Systems with limited heap space will need to do this. */
++/*********************************************************************/
++struct flashinfo meminfo; /* Flash information structure */
++static int flashFamily = FLASH_UNDEFINED;
++static int totalSize = 0;
++static struct cfi_query query;
++
++static UINT16 cfi_data_struct_29W160[] = {
++ 0x0020, 0x0049, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
++ 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
++ 0x0051, 0x0052, 0x0059, 0x0002, 0x0000, 0x0040, 0x0000, 0x0000,
++ 0x0000, 0x0000, 0x0000, 0x0027, 0x0036, 0x0000, 0x0000, 0x0004,
++ 0x0000, 0x000a, 0x0000, 0x0004, 0x0000, 0x0003, 0x0000, 0x0015,
++ 0x0002, 0x0000, 0x0000, 0x0000, 0x0004, 0x0000, 0x0000, 0x0040,
++ 0x0000, 0x0001, 0x0000, 0x0020, 0x0000, 0x0000, 0x0000, 0x0080,
++ 0x0000, 0x001e, 0x0000, 0x0000, 0x0001, 0xffff, 0xffff, 0xffff,
++ 0x0050, 0x0052, 0x0049, 0x0031, 0x0030, 0x0000, 0x0002, 0x0001,
++ 0x0001, 0x0004, 0x0000, 0x0000, 0x0000, 0xffff, 0xffff, 0x0002,
++ 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
++ 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
++ 0xffff, 0x0888, 0x252b, 0x8c84, 0x7dbc, 0xffff, 0xffff, 0xffff,
++ 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
++ 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
++ 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff
++};
++
++
++/*********************************************************************/
++/* Init_flash is used to build a sector table from the information */
++/* provided through the CFI query. This information is translated */
++/* from erase_block information to base:offset information for each */
++/* individual sector. This information is then stored in the meminfo */
++/* structure, and used throughout the driver to access sector */
++/* information. */
++/* */
++/* This is more efficient than deriving the sector base:offset */
++/* information every time the memory map switches (since on the */
++/* development platform can only map 64k at a time). If the entire */
++/* flash memory array can be mapped in, then the addition static */
++/* allocation for the meminfo structure can be eliminated, but the */
++/* drivers will have to be re-written. */
++/* */
++/* The meminfo struct occupies 653 bytes of heap space, depending */
++/* on the value of the define MAXSECTORS. Adjust to suit */
++/* application */
++/*********************************************************************/
++byte flash_init(void)
++{
++ int i=0, j=0, count=0;
++ int basecount=0L;
++ UINT16 device_id;
++ int flipCFIGeometry = FALSE;
++
++ /* First, assume
++ * a single 8k sector for sector 0. This is to allow
++ * the system to perform memory mapping to the device,
++ * even though the actual physical layout is unknown.
++ * Once mapped in, the CFI query will produce all
++ * relevant information.
++ */
++ meminfo.addr = 0L;
++ meminfo.areg = 0;
++ meminfo.nsect = 1;
++ meminfo.bank1start = 0;
++ meminfo.bank2start = 0;
++
++ meminfo.sec[0].size = 8192;
++ meminfo.sec[0].base = 0x00000;
++ meminfo.sec[0].bank = 1;
++
++ flash_command(FLASH_RESET, 0, 0, 0);
++
++ device_id = flash_get_device_id();
++
++ switch (device_id) {
++ case ID_I28F160C3B:
++ case ID_I28F320C3B:
++ case ID_I28F160C3T:
++ case ID_I28F320C3T:
++ flashFamily = FLASH_INTEL;
++ break;
++ case ID_AM29DL800B:
++ case ID_AM29LV800B:
++ case ID_AM29LV400B:
++ case ID_AM29LV160B:
++ case ID_AM29LV320B:
++ case ID_MX29LV320AB:
++ case ID_AM29LV320MB:
++ case ID_AM29DL800T:
++ case ID_AM29LV800T:
++ case ID_AM29LV160T:
++ case ID_AM29LV320T:
++ case ID_MX29LV320AT:
++ case ID_AM29LV320MT:
++ flashFamily = FLASH_AMD;
++ break;
++ case ID_SST39VF1601:
++ case ID_SST39VF3201:
++ flashFamily = FLASH_SST;
++ break;
++ default:
++ printk("Flash memory not supported! Device id = %x\n", device_id);
++ return -1;
++ }
++
++ if (flash_get_cfi(&query, 0, flashFamily) == -1) {
++ switch(device_id) {
++ case ID_AM29LV160T:
++ case ID_AM29LV160B:
++ flash_get_cfi(&query, cfi_data_struct_29W160, flashFamily);
++ break;
++ default:
++ printk("CFI data structure not found. Device id = %x\n", device_id);
++ return -1;
++ }
++ }
++
++ // need to determine if it top or bottom boot here
++ switch (device_id)
++ {
++ case ID_AM29DL800B:
++ case ID_AM29LV800B:
++ case ID_AM29LV400B:
++ case ID_AM29LV160B:
++ case ID_AM29LV320B:
++ case ID_MX29LV320AB:
++ case ID_AM29LV320MB:
++ case ID_I28F160C3B:
++ case ID_I28F320C3B:
++ case ID_I28F160C3T:
++ case ID_I28F320C3T:
++ case ID_SST39VF1601:
++ case ID_SST39VF3201:
++ flipCFIGeometry = FALSE;
++ break;
++ case ID_AM29DL800T:
++ case ID_AM29LV800T:
++ case ID_AM29LV160T:
++ case ID_AM29LV320T:
++ case ID_MX29LV320AT:
++ case ID_AM29LV320MT:
++ flipCFIGeometry = TRUE;
++ break;
++ default:
++ printk("Flash memory not supported! Device id = %x\n", device_id);
++ return -1;
++ }
++
++ count=0;basecount=0L;
++
++ if (!flipCFIGeometry)
++ {
++ for (i=0; i<query.num_erase_blocks; i++) {
++ for(j=0; j<query.erase_block[i].num_sectors; j++) {
++ meminfo.sec[count].size = (int) query.erase_block[i].sector_size;
++ meminfo.sec[count].base = (int) basecount;
++ basecount += (int) query.erase_block[i].sector_size;
++ count++;
++ }
++ }
++ }
++ else
++ {
++ for (i = (query.num_erase_blocks - 1); i >= 0; i--) {
++ for(j=0; j<query.erase_block[i].num_sectors; j++) {
++ meminfo.sec[count].size = (int) query.erase_block[i].sector_size;
++ meminfo.sec[count].base = (int) basecount;
++ basecount += (int) query.erase_block[i].sector_size;
++ count++;
++ }
++ }
++ }
++
++ meminfo.nsect = count;
++ totalSize = meminfo.sec[count-1].base + meminfo.sec[count-1].size;
++ return (0);
++}
++
++/*********************************************************************/
++/* Flash_sector_erase_int() is identical to flash_sector_erase(), */
++/* except it will wait until the erase is completed before returning */
++/* control to the calling function. This can be used in cases which */
++/* require the program to hold until a sector is erased, without */
++/* adding the wait check external to this function. */
++/*********************************************************************/
++byte flash_sector_erase_int(WORD sector)
++{
++ int i;
++
++ for( i = 0; i < 3; i++ ) {
++ flash_command(FLASH_SERASE, sector, 0, 0);
++ if (flash_wait(sector, 0, 0xffff) == STATUS_READY)
++ break;
++ }
++
++ return(1);
++}
++
++/*********************************************************************/
++/* flash_read_buf() reads buffer of data from the specified */
++/* offset from the sector parameter. */
++/*********************************************************************/
++int flash_read_buf(WORD sector, int offset,
++ byte *buffer, int numbytes)
++{
++ byte *fwp;
++
++ fwp = (byte *)flash_get_memptr(sector);
++
++ while (numbytes) {
++ *buffer++ = *(fwp + offset);
++ numbytes--;
++ fwp++;
++ }
++
++ return (1);
++}
++
++/*********************************************************************/
++/* flash_write_buf() utilizes */
++/* the unlock bypass mode of the flash device. This can remove */
++/* significant overhead from the bulk programming operation, and */
++/* when programming bulk data a sizeable performance increase can be */
++/* observed. */
++/*********************************************************************/
++int flash_write_buf(WORD sector, int offset, byte *buffer, int numbytes)
++{
++ int ret = -1;
++ int i;
++ unsigned char *p = flash_get_memptr(sector) + offset;
++
++ /* After writing the flash block, compare the contents to the source
++ * buffer. Try to write the sector successfully up to three times.
++ */
++ for( i = 0; i < 3; i++ ) {
++ ret = flash_write(sector, offset, buffer, numbytes);
++ if( !memcmp( p, buffer, numbytes ) )
++ break;
++ /* Erase and try again */
++ flash_sector_erase_int(sector);
++ ret = -1;
++ }
++
++ if( ret == -1 )
++ printk( "Flash write error. Verify failed\n" );
++
++ return( ret );
++}
++
++/*********************************************************************/
++/* Usefull funtion to return the number of sectors in the device. */
++/* Can be used for functions which need to loop among all the */
++/* sectors, or wish to know the number of the last sector. */
++/*********************************************************************/
++int flash_get_numsectors(void)
++{
++ return meminfo.nsect;
++}
++
++/*********************************************************************/
++/* flash_get_sector_size() is provided for cases in which the size */
++/* of a sector is required by a host application. The sector size */
++/* (in bytes) is returned in the data location pointed to by the */
++/* 'size' parameter. */
++/*********************************************************************/
++int flash_get_sector_size(WORD sector)
++{
++ return meminfo.sec[sector].size;
++}
++
++/*********************************************************************/
++/* The purpose of flash_get_memptr() is to return a memory pointer */
++/* which points to the beginning of memory space allocated for the */
++/* flash. All function pointers are then referenced from this */
++/* pointer. */
++/* */
++/* Different systems will implement this in different ways: */
++/* possibilities include: */
++/* - A direct memory pointer */
++/* - A pointer to a memory map */
++/* - A pointer to a hardware port from which the linear */
++/* address is translated */
++/* - Output of an MMU function / service */
++/* */
++/* Also note that this function expects the pointer to a specific */
++/* sector of the device. This can be provided by dereferencing */
++/* the pointer from a translated offset of the sector from a */
++/* global base pointer (e.g. flashptr = base_pointer + sector_offset)*/
++/* */
++/* Important: Many AMD flash devices need both bank and or sector */
++/* address bits to be correctly set (bank address bits are A18-A16, */
++/* and sector address bits are A18-A12, or A12-A15). Flash parts */
++/* which do not need these bits will ignore them, so it is safe to */
++/* assume that every part will require these bits to be set. */
++/*********************************************************************/
++unsigned char *flash_get_memptr(WORD sector)
++{
++ unsigned char *memptr = (unsigned char*)(FLASH_BASE_ADDR_REG + meminfo.sec[sector].base);
++
++ return (memptr);
++}
++
++/*********************************************************************/
++/* The purpose of flash_get_blk() is to return a the block number */
++/* for a given memory address. */
++/*********************************************************************/
++int flash_get_blk(int addr)
++{
++ int blk_start, i;
++ int last_blk = flash_get_numsectors();
++ int relative_addr = addr - (int) FLASH_BASE_ADDR_REG;
++
++ for(blk_start=0, i=0; i < relative_addr && blk_start < last_blk; blk_start++)
++ i += flash_get_sector_size(blk_start);
++
++ if( i > relative_addr )
++ {
++ blk_start--; // last blk, dec by 1
++ }
++ else
++ if( blk_start == last_blk )
++ {
++ printk("Address is too big.\n");
++ blk_start = -1;
++ }
++
++ return( blk_start );
++}
++
++/************************************************************************/
++/* The purpose of flash_get_total_size() is to return the total size of */
++/* the flash */
++/************************************************************************/
++int flash_get_total_size()
++{
++ return totalSize;
++}
++
++/*********************************************************************/
++/* Flash_command() is the main driver function. It performs */
++/* every possible command available to AMD B revision */
++/* flash parts. Note that this command is not used directly, but */
++/* rather called through the API wrapper functions provided below. */
++/*********************************************************************/
++static void flash_command(int command, WORD sector, int offset, UINT16 data)
++{
++ volatile UINT16 *flashptr;
++ volatile UINT16 *flashbase;
++
++ flashptr = (UINT16 *) flash_get_memptr(sector);
++ flashbase = (UINT16 *) flash_get_memptr(0);
++
++ switch (flashFamily) {
++ case FLASH_UNDEFINED:
++ /* These commands should work for AMD, Intel and SST flashes */
++ switch (command) {
++ case FLASH_RESET:
++ flashptr[0] = 0xF0;
++ flashptr[0] = 0xFF;
++ break;
++ case FLASH_READ_ID:
++ flashptr[0x5555] = 0xAA; /* unlock 1 */
++ flashptr[0x2AAA] = 0x55; /* unlock 2 */
++ flashptr[0x5555] = 0x90;
++ break;
++ default:
++ break;
++ }
++ break;
++ case FLASH_AMD:
++ switch (command) {
++ case FLASH_RESET:
++ flashptr[0] = 0xF0;
++ break;
++ case FLASH_READ_ID:
++ flashptr[0x555] = 0xAA; /* unlock 1 */
++ flashptr[0x2AA] = 0x55; /* unlock 2 */
++ flashptr[0x555] = 0x90;
++ break;
++ case FLASH_CFIQUERY:
++ flashptr[0x55] = 0x98;
++ break;
++ case FLASH_UB:
++ flashptr[0x555] = 0xAA; /* unlock 1 */
++ flashptr[0x2AA] = 0x55; /* unlock 2 */
++ flashptr[0x555] = 0x20;
++ break;
++ case FLASH_PROG:
++ flashptr[0] = 0xA0;
++ flashptr[offset/2] = data;
++ break;
++ case FLASH_UBRESET:
++ flashptr[0] = 0x90;
++ flashptr[0] = 0x00;
++ break;
++ case FLASH_SERASE:
++ flashptr[0x555] = 0xAA; /* unlock 1 */
++ flashptr[0x2AA] = 0x55; /* unlock 2 */
++ flashptr[0x555] = 0x80;
++ flashptr[0x555] = 0xAA;
++ flashptr[0x2AA] = 0x55;
++ flashptr[0] = 0x30;
++ break;
++ default:
++ break;
++ }
++ break;
++ case FLASH_INTEL:
++ switch (command) {
++ case FLASH_RESET:
++ flashptr[0] = 0xFF;
++ break;
++ case FLASH_READ_ID:
++ flashptr[0] = 0x90;
++ break;
++ case FLASH_CFIQUERY:
++ flashptr[0] = 0x98;
++ break;
++ case FLASH_PROG:
++ flashptr[0] = 0x40;
++ flashptr[offset/2] = data;
++ break;
++ case FLASH_SERASE:
++ flashptr[0] = 0x60;
++ flashptr[0] = 0xD0;
++ flashptr[0] = 0x20;
++ flashptr[0] = 0xD0;
++ break;
++ default:
++ break;
++ }
++ break;
++ case FLASH_SST:
++ switch (command) {
++ case FLASH_RESET:
++ flashbase[0x5555] = 0xAA; /* unlock 1 */
++ flashbase[0x2AAA] = 0x55; /* unlock 2 */
++ flashbase[0x5555] = 0xf0;
++ break;
++ case FLASH_READ_ID:
++ flashbase[0x5555] = 0xAA; /* unlock 1 */
++ flashbase[0x2AAA] = 0x55; /* unlock 2 */
++ flashbase[0x5555] = 0x90;
++ break;
++ case FLASH_CFIQUERY:
++ flashbase[0x5555] = 0xAA; /* unlock 1 */
++ flashbase[0x2AAA] = 0x55; /* unlock 2 */
++ flashbase[0x5555] = 0x98;
++ break;
++ case FLASH_UB:
++ break;
++ case FLASH_PROG:
++ flashbase[0x5555] = 0xAA; /* unlock 1 */
++ flashbase[0x2AAA] = 0x55; /* unlock 2 */
++ flashbase[0x5555] = 0xa0;
++ flashptr[offset/2] = data;
++ break;
++ case FLASH_UBRESET:
++ break;
++ case FLASH_SERASE:
++ flashbase[0x5555] = 0xAA; /* unlock 1 */
++ flashbase[0x2AAA] = 0x55; /* unlock 2 */
++ flashbase[0x5555] = 0x80;
++ flashbase[0x5555] = 0xAA;
++ flashbase[0x2AAA] = 0x55;
++ flashptr[0] = 0x30;
++ break;
++ default:
++ break;
++ }
++ break;
++ default:
++ break;
++ }
++}
++
++/*********************************************************************/
++/* flash_write extends the functionality of flash_program() by */
++/* providing an faster way to program multiple data words, without */
++/* needing the function overhead of looping algorithms which */
++/* program word by word. This function utilizes fast pointers */
++/* to quickly loop through bulk data. */
++/*********************************************************************/
++static int flash_write(WORD sector, int offset, byte *buf, int nbytes)
++{
++ UINT16 *src;
++ src = (UINT16 *)buf;
++
++ if ((nbytes | offset) & 1) {
++ return -1;
++ }
++
++ flash_command(FLASH_UB, 0, 0, 0);
++ while (nbytes > 0) {
++ flash_command(FLASH_PROG, sector, offset, *src);
++ if (flash_wait(sector, offset, *src) != STATUS_READY)
++ break;
++ offset +=2;
++ nbytes -=2;
++ src++;
++ }
++ flash_command(FLASH_UBRESET, 0, 0, 0);
++
++ return (byte*)src - buf;
++}
++
++/*********************************************************************/
++/* flash_wait utilizes the DQ6, DQ5, and DQ2 polling algorithms */
++/* described in the flash data book. It can quickly ascertain the */
++/* operational status of the flash device, and return an */
++/* appropriate status code (defined in flash.h) */
++/*********************************************************************/
++static int flash_wait(WORD sector, int offset, UINT16 data)
++{
++ volatile UINT16 *flashptr; /* flash window */
++ UINT16 d1;
++
++ flashptr = (UINT16 *) flash_get_memptr(sector);
++
++ if (flashFamily == FLASH_AMD || flashFamily == FLASH_SST) {
++#if defined(_BCM96338_) || defined(CONFIG_BCM96338)
++ do {
++ d1 = flashptr[offset/2];
++ if (d1 == data)
++ return STATUS_READY;
++ } while (!(d1 & 0x20));
++
++ d1 = flashptr[offset/2];
++
++ if (d1 != data) {
++ flash_command(FLASH_RESET, 0, 0, 0);
++ return STATUS_TIMEOUT;
++ }
++#else
++ do {
++ d1 = *flashptr; /* read data */
++ d1 ^= *flashptr; /* read it again and see what toggled */
++ if (d1 == 0) /* no toggles, nothing's happening */
++ return STATUS_READY;
++ } while (!(d1 & 0x20));
++
++ d1 = *flashptr; /* read data */
++ d1 ^= *flashptr; /* read it again and see what toggled */
++
++ if (d1 != 0) {
++ flash_command(FLASH_RESET, 0, 0, 0);
++ return STATUS_TIMEOUT;
++ }
++#endif
++ } else if (flashFamily == FLASH_INTEL) {
++ flashptr[0] = 0x70;
++ /* Wait for completion */
++ while(!(*flashptr & 0x80));
++ if (*flashptr & 0x30) {
++ flashptr[0] = 0x50;
++ flash_command(FLASH_RESET, 0, 0, 0);
++ return STATUS_TIMEOUT;
++ }
++ flashptr[0] = 0x50;
++ flash_command(FLASH_RESET, 0, 0, 0);
++ }
++
++ return STATUS_READY;
++}
++
++/*********************************************************************/
++/* flash_get_device_id() will perform an autoselect sequence on the */
++/* flash device, and return the device id of the component. */
++/* This function automatically resets to read mode. */
++/*********************************************************************/
++static UINT16 flash_get_device_id()
++{
++ volatile UINT16 *fwp; /* flash window */
++ UINT16 answer;
++
++ fwp = (UINT16 *)flash_get_memptr(0);
++
++ flash_command(FLASH_READ_ID, 0, 0, 0);
++ answer = *(fwp + 1);
++ if (answer == ID_AM29LV320M) {
++ answer = *(fwp + 0xe);
++ answer = *(fwp + 0xf);
++ }
++
++ flash_command(FLASH_RESET, 0, 0, 0);
++ return( (UINT16) answer );
++}
++
++/*********************************************************************/
++/* flash_get_cfi() is the main CFI workhorse function. Due to it's */
++/* complexity and size it need only be called once upon */
++/* initializing the flash system. Once it is called, all operations */
++/* are performed by looking at the meminfo structure. */
++/* All possible care was made to make this algorithm as efficient as */
++/* possible. 90% of all operations are memory reads, and all */
++/* calculations are done using bit-shifts when possible */
++/*********************************************************************/
++static int flash_get_cfi(struct cfi_query *query, UINT16 *cfi_struct, int flashFamily)
++{
++ volatile UINT16 *fwp; /* flash window */
++ int i=0;
++
++ flash_command(FLASH_CFIQUERY, 0, 0, 0);
++
++ if (cfi_struct == 0)
++ fwp = (UINT16 *)flash_get_memptr(0);
++ else
++ fwp = cfi_struct;
++
++ /* Initial house-cleaning */
++ for(i=0; i < 8; i++) {
++ query->erase_block[i].sector_size = 0;
++ query->erase_block[i].num_sectors = 0;
++ }
++
++ /* If not 'QRY', then we dont have a CFI enabled device in the socket */
++ if( fwp[0x10] != 'Q' &&
++ fwp[0x11] != 'R' &&
++ fwp[0x12] != 'Y') {
++ flash_command(FLASH_RESET, 0, 0, 0);
++ return(-1);
++ }
++
++ query->num_erase_blocks = fwp[0x2C];
++ if(flashFamily == FLASH_SST)
++ query->num_erase_blocks = 1;
++
++ for(i=0; i < query->num_erase_blocks; i++) {
++ query->erase_block[i].num_sectors = fwp[(0x2D+(4*i))] + (fwp[0x2E + (4*i)] << 8);
++ query->erase_block[i].num_sectors++;
++ query->erase_block[i].sector_size = 256 * (256 * fwp[(0x30+(4*i))] + fwp[(0x2F+(4*i))]);
++ }
++
++ flash_command(FLASH_RESET, 0, 0, 0);
++ return(1);
++}
+diff -urN linux-2.6.8.1/bcmdrivers/opensource/char/board/bcm963xx/impl1/cfiflash.h linux-2.6.8.1-brcm63xx/bcmdrivers/opensource/char/board/bcm963xx/impl1/cfiflash.h
+--- linux-2.6.8.1/bcmdrivers/opensource/char/board/bcm963xx/impl1/cfiflash.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.8.1-brcm63xx/bcmdrivers/opensource/char/board/bcm963xx/impl1/cfiflash.h 2006-06-26 09:07:10.000000000 +0200
+@@ -0,0 +1,150 @@
++/************************************************************************/
++/* */
++/* AMD CFI Enabled Flash Memory Drivers */
++/* File name: CFIFLASH.H */
++/* Revision: 1.0 5/07/98 */
++/* */
++/* Copyright (c) 1998 ADVANCED MICRO DEVICES, INC. All Rights Reserved. */
++/* This software is unpublished and contains the trade secrets and */
++/* confidential proprietary information of AMD. Unless otherwise */
++/* provided in the Software Agreement associated herewith, it is */
++/* licensed in confidence "AS IS" and is not to be reproduced in whole */
++/* or part by any means except for backup. Use, duplication, or */
++/* disclosure by the Government is subject to the restrictions in */
++/* paragraph (b) (3) (B) of the Rights in Technical Data and Computer */
++/* Software clause in DFAR 52.227-7013 (a) (Oct 1988). */
++/* Software owned by */
++/* Advanced Micro Devices, Inc., */
++/* One AMD Place, */
++/* P.O. Box 3453 */
++/* Sunnyvale, CA 94088-3453. */
++/************************************************************************/
++/* This software constitutes a basic shell of source code for */
++/* programming all AMD Flash components. AMD */
++/* will not be responsible for misuse or illegal use of this */
++/* software for devices not supported herein. AMD is providing */
++/* this source code "AS IS" and will not be responsible for */
++/* issues arising from incorrect user implementation of the */
++/* source code herein. It is the user's responsibility to */
++/* properly design-in this source code. */
++/* */
++/************************************************************************/
++#ifndef _CFIFLASH_H
++#define _CFIFLASH_H
++
++#if defined __cplusplus
++extern "C" {
++#endif
++
++/* include board/CPU specific definitions */
++#include "bcmtypes.h"
++#include "board.h"
++
++#define FLASH_BASE_ADDR_REG FLASH_BASE
++
++#ifndef NULL
++#define NULL 0
++#endif
++
++#define MAXSECTORS 1024 /* maximum number of sectors supported */
++
++/* A structure for identifying a flash part. There is one for each
++ * of the flash part definitions. We need to keep track of the
++ * sector organization, the address register used, and the size
++ * of the sectors.
++ */
++struct flashinfo {
++ char *name; /* "Am29DL800T", etc. */
++ unsigned long addr; /* physical address, once translated */
++ int areg; /* Can be set to zero for all parts */
++ int nsect; /* # of sectors -- 19 in LV, 22 in DL */
++ int bank1start; /* first sector # in bank 1 */
++ int bank2start; /* first sector # in bank 2, if DL part */
++ struct {
++ long size; /* # of bytes in this sector */
++ long base; /* offset from beginning of device */
++ int bank; /* 1 or 2 for DL; 1 for LV */
++ } sec[MAXSECTORS]; /* per-sector info */
++};
++
++/*
++ * This structure holds all CFI query information as defined
++ * in the JEDEC standard. All information up to
++ * primary_extended_query is standard among all manufactures
++ * with CFI enabled devices.
++ */
++
++struct cfi_query {
++ int num_erase_blocks; /* Number of sector defs. */
++ struct {
++ unsigned long sector_size; /* byte size of sector */
++ int num_sectors; /* Num sectors of this size */
++ } erase_block[8]; /* Max of 256, but 8 is good */
++};
++
++/* Standard Boolean declarations */
++#define TRUE 1
++#define FALSE 0
++
++/* Define different type of flash */
++#define FLASH_UNDEFINED 0
++#define FLASH_AMD 1
++#define FLASH_INTEL 2
++#define FLASH_SST 3
++
++/* Command codes for the flash_command routine */
++#define FLASH_RESET 0 /* reset to read mode */
++#define FLASH_READ_ID 1 /* read device ID */
++#define FLASH_CFIQUERY 2 /* CFI query */
++#define FLASH_UB 3 /* go into unlock bypass mode */
++#define FLASH_PROG 4 /* program a word */
++#define FLASH_UBRESET 5 /* reset to read mode from unlock bypass mode */
++#define FLASH_SERASE 6 /* sector erase */
++
++/* Return codes from flash_status */
++#define STATUS_READY 0 /* ready for action */
++#define STATUS_TIMEOUT 1 /* operation timed out */
++
++/* A list of AMD compatible device ID's - add others as needed */
++#define ID_AM29DL800T 0x224A
++#define ID_AM29DL800B 0x22CB
++#define ID_AM29LV800T 0x22DA
++#define ID_AM29LV800B 0x225B
++#define ID_AM29LV400B 0x22BA
++
++#define ID_AM29LV160B 0x2249
++#define ID_AM29LV160T 0x22C4
++
++#define ID_AM29LV320T 0x22F6
++#define ID_MX29LV320AT 0x22A7
++#define ID_AM29LV320B 0x22F9
++#define ID_MX29LV320AB 0x22A8
++
++#define ID_AM29LV320M 0x227E
++#define ID_AM29LV320MB 0x2200
++#define ID_AM29LV320MT 0x2201
++
++#define ID_SST39VF1601 0x234B
++#define ID_SST39VF3201 0x235B
++
++/* A list of Intel compatible device ID's - add others as needed */
++#define ID_I28F160C3T 0x88C2
++#define ID_I28F160C3B 0x88C3
++#define ID_I28F320C3T 0x88C4
++#define ID_I28F320C3B 0x88C5
++
++extern byte flash_init(void);
++extern int flash_write_buf(WORD sector, int offset, byte *buffer, int numbytes);
++extern int flash_read_buf(WORD sector, int offset, byte *buffer, int numbytes);
++extern byte flash_sector_erase_int(WORD sector);
++extern int flash_get_numsectors(void);
++extern int flash_get_sector_size(WORD sector);
++extern int flash_get_total_size(void);
++extern unsigned char *flash_get_memptr(WORD sector);
++extern int flash_get_blk(int addr);
++
++#if defined __cplusplus
++}
++#endif
++
++#endif
+diff -urN linux-2.6.8.1/bcmdrivers/opensource/char/serial/bcm96348/Makefile linux-2.6.8.1-brcm63xx/bcmdrivers/opensource/char/serial/bcm96348/Makefile
+--- linux-2.6.8.1/bcmdrivers/opensource/char/serial/bcm96348/Makefile 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.8.1-brcm63xx/bcmdrivers/opensource/char/serial/bcm96348/Makefile 2006-06-26 09:07:10.000000000 +0200
+@@ -0,0 +1,13 @@
++# File: bcmdrivers/opensource/char/serial
++#
++# Makefile for the BCM63xx serial/console driver
++
++obj-$(CONFIG_BCM_SERIAL) += bcm63xx_cons.o
++
++EXTRA_CFLAGS += -I$(INC_BRCMDRIVER_PUB_PATH)/$(BRCM_BOARD)
++
++-include $(TOPDIR)/Rules.make
++
++clean:
++ rm -f core *.o *.a *.s
++
+diff -urN linux-2.6.8.1/bcmdrivers/opensource/char/serial/bcm96348/bcm63xx_cons.c linux-2.6.8.1-brcm63xx/bcmdrivers/opensource/char/serial/bcm96348/bcm63xx_cons.c
+--- linux-2.6.8.1/bcmdrivers/opensource/char/serial/bcm96348/bcm63xx_cons.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.8.1-brcm63xx/bcmdrivers/opensource/char/serial/bcm96348/bcm63xx_cons.c 2006-06-26 09:07:10.000000000 +0200
+@@ -0,0 +1,1035 @@
++/*
++<:copyright-gpl
++ Copyright 2002 Broadcom Corp. All Rights Reserved.
++
++ This program is free software; you can distribute it and/or modify it
++ under the terms of the GNU General Public License (Version 2) as
++ published by the Free Software Foundation.
++
++ This program is distributed in the hope it will be useful, but WITHOUT
++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
++ for more details.
++
++ You should have received a copy of the GNU General Public License along
++ with this program; if not, write to the Free Software Foundation, Inc.,
++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
++:>
++*/
++
++/* Description: Serial port driver for the BCM963XX. */
++
++#define CARDNAME "bcm963xx_serial driver"
++#define VERSION "2.0"
++#define VER_STR CARDNAME " v" VERSION "\n"
++
++
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/version.h>
++#include <linux/init.h>
++#include <linux/slab.h>
++#include <linux/interrupt.h>
++
++/* for definition of struct console */
++#include <linux/console.h>
++#include <linux/tty.h>
++#include <linux/tty_flip.h>
++#include <linux/serial.h>
++#include <asm/uaccess.h>
++
++#include <bcmtypes.h>
++#include <board.h>
++#include <bcm_map_part.h>
++#include <bcm_intr.h>
++
++extern void _putc(char);
++extern void _puts(const char *);
++
++typedef struct bcm_serial {
++ volatile Uart * port;
++ int type;
++ int flags;
++ int irq;
++ int baud_base;
++ int blocked_open;
++ unsigned short close_delay;
++ unsigned short closing_wait;
++ unsigned short line; /* port/line number */
++ unsigned short cflags; /* line configuration flag */
++ unsigned short x_char; /* xon/xoff character */
++ unsigned short read_status_mask; /* mask for read condition */
++ unsigned short ignore_status_mask; /* mask for ignore condition */
++ unsigned long event; /* mask used in BH */
++ int xmit_head; /* Position of the head */
++ int xmit_tail; /* Position of the tail */
++ int xmit_cnt; /* Count of the chars in the buffer */
++ int count; /* indicates how many times it has been opened */
++ int magic;
++
++ struct async_icount icount; /* keep track of things ... */
++ struct tty_struct *tty; /* tty associated */
++ struct termios normal_termios;
++
++ wait_queue_head_t open_wait;
++ wait_queue_head_t close_wait;
++
++ long session; /* Session of opening process */
++ long pgrp; /* pgrp of opening process */
++
++ unsigned char is_initialized;
++} Context;
++
++
++/*---------------------------------------------------------------------*/
++/* Define bits in the Interrupt Enable register */
++/*---------------------------------------------------------------------*/
++/* Enable receive interrupt */
++#define RXINT (RXFIFONE|RXOVFERR)
++
++/* Enable transmit interrupt */
++#define TXINT (TXFIFOEMT|TXUNDERR|TXOVFERR)
++
++/* Enable receiver line status interrupt */
++#define LSINT (RXBRK|RXPARERR|RXFRAMERR)
++
++#define BCM_NUM_UARTS 1
++
++#define BD_BCM63XX_TIMER_CLOCK_INPUT (FPERIPH)
++
++
++static struct bcm_serial multi[BCM_NUM_UARTS];
++static struct bcm_serial *lines[BCM_NUM_UARTS];
++static struct tty_driver serial_driver;
++static struct tty_struct *serial_table[BCM_NUM_UARTS];
++static struct termios *serial_termios[BCM_NUM_UARTS];
++static struct termios *serial_termios_locked[BCM_NUM_UARTS];
++static int serial_refcount;
++
++
++static void bcm_stop (struct tty_struct *tty);
++static void bcm_start (struct tty_struct *tty);
++static inline void receive_chars (struct bcm_serial * info);
++static int startup (struct bcm_serial *info);
++static void shutdown (struct bcm_serial * info);
++static void change_speed( volatile Uart *pUart, tcflag_t cFlag );
++static void bcm63xx_cons_flush_chars (struct tty_struct *tty);
++static int bcm63xx_cons_write (struct tty_struct *tty, int from_user,
++ const unsigned char *buf, int count);
++static int bcm63xx_cons_write_room (struct tty_struct *tty);
++static int bcm_chars_in_buffer (struct tty_struct *tty);
++static void bcm_flush_buffer (struct tty_struct *tty);
++static void bcm_throttle (struct tty_struct *tty);
++static void bcm_unthrottle (struct tty_struct *tty);
++static void bcm_send_xchar (struct tty_struct *tty, char ch);
++static int get_serial_info(struct bcm_serial *info, struct serial_struct *retinfo);
++static int set_serial_info (struct bcm_serial *info, struct serial_struct *new_info);
++static int get_lsr_info (struct bcm_serial *info, unsigned int *value);
++static void send_break (struct bcm_serial *info, int duration);
++static int bcm_ioctl (struct tty_struct * tty, struct file * file,
++ unsigned int cmd, unsigned long arg);
++static void bcm_set_termios (struct tty_struct *tty, struct termios *old_termios);
++static void bcm63xx_cons_close (struct tty_struct *tty, struct file *filp);
++static void bcm_hangup (struct tty_struct *tty);
++static int block_til_ready (struct tty_struct *tty, struct file *filp, struct bcm_serial *info);
++static int bcm63xx_cons_open (struct tty_struct * tty, struct file * filp);
++static int __init bcm63xx_serialinit(void);
++
++
++/*
++ * ------------------------------------------------------------
++ * rs_stop () and rs_start ()
++ *
++ * These routines are called before setting or resetting
++ * tty->stopped. They enable or disable transmitter interrupts,
++ * as necessary.
++ * ------------------------------------------------------------
++ */
++static void bcm_stop (struct tty_struct *tty)
++{
++}
++
++static void bcm_start (struct tty_struct *tty)
++{
++ _puts(CARDNAME " Start\n");
++}
++
++/*
++ * ------------------------------------------------------------
++ * receive_char ()
++ *
++ * This routine deals with inputs from any lines.
++ * ------------------------------------------------------------
++ */
++static inline void receive_chars (struct bcm_serial * info)
++{
++ struct tty_struct *tty = 0;
++ struct async_icount * icount;
++ int ignore = 0;
++ unsigned short status, tmp;
++ UCHAR ch = 0;
++ while ((status = info->port->intStatus) & RXINT)
++ {
++ if (status & RXFIFONE)
++ ch = info->port->Data; // Read the character
++ tty = info->tty; /* now tty points to the proper dev */
++ icount = &info->icount;
++ if (! tty)
++ break;
++ if (tty->flip.count >= TTY_FLIPBUF_SIZE)
++ break;
++ *tty->flip.char_buf_ptr = ch;
++ *tty->flip.flag_buf_ptr = 0;
++ icount->rx++;
++ if (status & RXBRK)
++ {
++ *tty->flip.flag_buf_ptr = TTY_BREAK;
++ icount->brk++;
++ }
++ // keep track of the statistics
++ if (status & (RXFRAMERR | RXPARERR | RXOVFERR))
++ {
++ if (status & RXPARERR) /* parity error */
++ icount->parity++;
++ else
++ if (status & RXFRAMERR) /* frame error */
++ icount->frame++;
++ if (status & RXOVFERR)
++ {
++ // Overflow. Reset the RX FIFO
++ info->port->fifoctl |= RSTRXFIFOS;
++ icount->overrun++;
++ }
++ // check to see if we should ignore the character
++ // and mask off conditions that should be ignored
++ if (status & info->ignore_status_mask)
++ {
++ if (++ignore > 100 )
++ break;
++ goto ignore_char;
++ }
++ // Mask off the error conditions we want to ignore
++ tmp = status & info->read_status_mask;
++ if (tmp & RXPARERR)
++ {
++ *tty->flip.flag_buf_ptr = TTY_PARITY;
++ }
++ else
++ if (tmp & RXFRAMERR)
++ {
++ *tty->flip.flag_buf_ptr = TTY_FRAME;
++ }
++ if (tmp & RXOVFERR)
++ {
++ if (tty->flip.count < TTY_FLIPBUF_SIZE)
++ {
++ tty->flip.count++;
++ tty->flip.flag_buf_ptr++;
++ tty->flip.char_buf_ptr++;
++ *tty->flip.flag_buf_ptr = TTY_OVERRUN;
++ }
++ }
++ }
++ tty->flip.flag_buf_ptr++;
++ tty->flip.char_buf_ptr++;
++ tty->flip.count++;
++ }
++ignore_char:
++ if (tty)
++ tty_flip_buffer_push(tty);
++}
++
++
++/*
++ * ------------------------------------------------------------
++ * bcm_interrupt ()
++ *
++ * this is the main interrupt routine for the chip.
++ * It deals with the multiple ports.
++ * ------------------------------------------------------------
++ */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++static irqreturn_t bcm_interrupt (int irq, void * dev, struct pt_regs * regs)
++#else
++static void bcm_interrupt (int irq, void * dev, struct pt_regs * regs)
++#endif
++{
++ struct bcm_serial * info = lines[0];
++ UINT16 intStat;
++
++ /* get pending interrupt flags from UART */
++
++ /* Mask with only the serial interrupts that are enabled */
++ intStat = info->port->intStatus & info->port->intMask;
++ while (intStat)
++ {
++ if (intStat & RXINT)
++ receive_chars (info);
++ else
++ if (intStat & TXINT)
++ info->port->intStatus = TXINT;
++ else /* don't know what it was, so let's mask it */
++ info->port->intMask &= ~intStat;
++
++ intStat = info->port->intStatus & info->port->intMask;
++ }
++
++ // Clear the interrupt
++ BcmHalInterruptEnable (INTERRUPT_ID_UART);
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++ return IRQ_HANDLED;
++#endif
++}
++
++/*
++ * -------------------------------------------------------------------
++ * startup ()
++ *
++ * various initialization tasks
++ * -------------------------------------------------------------------
++ */
++static int startup (struct bcm_serial *info)
++{
++ // Port is already started...
++ return 0;
++}
++
++/*
++ * -------------------------------------------------------------------
++ * shutdown ()
++ *
++ * This routine will shutdown a serial port; interrupts are disabled, and
++ * DTR is dropped if the hangup on close termio flag is on.
++ * -------------------------------------------------------------------
++ */
++static void shutdown (struct bcm_serial * info)
++{
++ unsigned long flags;
++ if (!info->is_initialized)
++ return;
++
++ save_flags (flags);
++ cli ();
++
++ info->port->control &= ~(BRGEN|TXEN|RXEN);
++ if (info->tty)
++ set_bit (TTY_IO_ERROR, &info->tty->flags);
++ info->is_initialized = 0;
++
++ restore_flags (flags);
++}
++/*
++ * -------------------------------------------------------------------
++ * change_speed ()
++ *
++ * Set the baud rate, character size, parity and stop bits.
++ * -------------------------------------------------------------------
++ */
++static void change_speed( volatile Uart *pUart, tcflag_t cFlag )
++{
++ unsigned long ulFlags, ulBaud, ulClockFreqHz, ulTmp;
++ save_flags(ulFlags);
++ cli();
++ switch( cFlag & (CBAUD | CBAUDEX) )
++ {
++ case B115200:
++ ulBaud = 115200;
++ break;
++ case B57600:
++ ulBaud = 57600;
++ break;
++ case B38400:
++ ulBaud = 38400;
++ break;
++ case B19200:
++ ulBaud = 19200;
++ break;
++ case B9600:
++ ulBaud = 9600;
++ break;
++ case B4800:
++ ulBaud = 4800;
++ break;
++ case B2400:
++ ulBaud = 2400;
++ break;
++ case B1800:
++ ulBaud = 1800;
++ break;
++ case B1200:
++ ulBaud = 1200;
++ break;
++ case B600:
++ ulBaud = 600;
++ break;
++ case B300:
++ ulBaud = 300;
++ break;
++ case B200:
++ ulBaud = 200;
++ break;
++ case B150:
++ ulBaud = 150;
++ break;
++ case B134:
++ ulBaud = 134;
++ break;
++ case B110:
++ ulBaud = 110;
++ break;
++ case B75:
++ ulBaud = 75;
++ break;
++ case B50:
++ ulBaud = 50;
++ break;
++ default:
++ ulBaud = 115200;
++ break;
++ }
++
++ /* Calculate buad rate. */
++ ulClockFreqHz = BD_BCM63XX_TIMER_CLOCK_INPUT;
++ ulTmp = (ulClockFreqHz / ulBaud) / 16;
++ if( ulTmp & 0x01 )
++ ulTmp /= 2; /* Rounding up, so sub is already accounted for */
++ else
++ ulTmp = (ulTmp / 2) - 1; /* Rounding down so we must sub 1 */
++ pUart->baudword = ulTmp;
++
++ /* Set character size, stop bits and parity. */
++ switch( cFlag & CSIZE )
++ {
++ case CS5:
++ ulTmp = BITS5SYM; /* select transmit 5 bit data size */
++ break;
++ case CS6:
++ ulTmp = BITS6SYM; /* select transmit 6 bit data size */
++ break;
++ case CS7:
++ ulTmp = BITS7SYM; /* select transmit 7 bit data size */
++ break;
++ /*case CS8:*/
++ default:
++ ulTmp = BITS8SYM; /* select transmit 8 bit data size */
++ break;
++ }
++ if( cFlag & CSTOPB )
++ ulTmp |= TWOSTOP; /* select 2 stop bits */
++ else
++ ulTmp |= ONESTOP; /* select one stop bit */
++
++ /* Write these values into the config reg. */
++ pUart->config = ulTmp;
++ pUart->control &= ~(RXPARITYEN | TXPARITYEN | RXPARITYEVEN | TXPARITYEVEN);
++ switch( cFlag & (PARENB | PARODD) )
++ {
++ case PARENB|PARODD:
++ pUart->control |= RXPARITYEN | TXPARITYEN;
++ break;
++ case PARENB:
++ pUart->control |= RXPARITYEN | TXPARITYEN | RXPARITYEVEN | TXPARITYEVEN;
++ break;
++ default:
++ pUart->control |= 0;
++ break;
++ }
++
++ /* Reset and flush uart */
++ pUart->fifoctl = RSTTXFIFOS | RSTRXFIFOS;
++ restore_flags( ulFlags );
++}
++
++
++/*
++ * -------------------------------------------------------------------
++ * bcm_flush_char ()
++ *
++ * Nothing to flush. Polled I/O is used.
++ * -------------------------------------------------------------------
++ */
++static void bcm63xx_cons_flush_chars (struct tty_struct *tty)
++{
++}
++
++
++/*
++ * -------------------------------------------------------------------
++ * bcm63xx_cons_write ()
++ *
++ * Main output routine using polled I/O.
++ * -------------------------------------------------------------------
++ */
++static int bcm63xx_cons_write (struct tty_struct *tty, int from_user,
++ const unsigned char *buf, int count)
++{
++ int c;
++
++ for (c = 0; c < count; c++)
++ _putc(buf[c]);
++ return count;
++}
++
++/*
++ * -------------------------------------------------------------------
++ * bcm63xx_cons_write_room ()
++ *
++ * Compute the amount of space available for writing.
++ * -------------------------------------------------------------------
++ */
++static int bcm63xx_cons_write_room (struct tty_struct *tty)
++{
++ /* Pick a number. Any number. Polled I/O is used. */
++ return 1024;
++}
++
++/*
++ * -------------------------------------------------------------------
++ * bcm_chars_in_buffer ()
++ *
++ * compute the amount of char left to be transmitted
++ * -------------------------------------------------------------------
++ */
++static int bcm_chars_in_buffer (struct tty_struct *tty)
++{
++ return 0;
++}
++
++/*
++ * -------------------------------------------------------------------
++ * bcm_flush_buffer ()
++ *
++ * Empty the output buffer
++ * -------------------------------------------------------------------
++ */
++static void bcm_flush_buffer (struct tty_struct *tty)
++{
++}
++
++/*
++ * ------------------------------------------------------------
++ * bcm_throttle () and bcm_unthrottle ()
++ *
++ * This routine is called by the upper-layer tty layer to signal that
++ * incoming characters should be throttled (or not).
++ * ------------------------------------------------------------
++ */
++static void bcm_throttle (struct tty_struct *tty)
++{
++ struct bcm_serial *info = (struct bcm_serial *)tty->driver_data;
++ if (I_IXOFF(tty))
++ info->x_char = STOP_CHAR(tty);
++}
++
++static void bcm_unthrottle (struct tty_struct *tty)
++{
++ struct bcm_serial *info = (struct bcm_serial *)tty->driver_data;
++ if (I_IXOFF(tty))
++ {
++ if (info->x_char)
++ info->x_char = 0;
++ else
++ info->x_char = START_CHAR(tty);
++ }
++}
++
++static void bcm_send_xchar (struct tty_struct *tty, char ch)
++{
++ struct bcm_serial *info = (struct bcm_serial *)tty->driver_data;
++ info->x_char = ch;
++ if (ch)
++ bcm_start (info->tty);
++}
++
++/*
++ * ------------------------------------------------------------
++ * rs_ioctl () and friends
++ * ------------------------------------------------------------
++ */
++static int get_serial_info(struct bcm_serial *info, struct serial_struct *retinfo)
++{
++ struct serial_struct tmp;
++
++ if (!retinfo)
++ return -EFAULT;
++
++ memset (&tmp, 0, sizeof(tmp));
++ tmp.type = info->type;
++ tmp.line = info->line;
++ tmp.port = (int) info->port;
++ tmp.irq = info->irq;
++ tmp.flags = 0;
++ tmp.baud_base = info->baud_base;
++ tmp.close_delay = info->close_delay;
++ tmp.closing_wait = info->closing_wait;
++
++ return copy_to_user (retinfo, &tmp, sizeof(*retinfo));
++}
++
++static int set_serial_info (struct bcm_serial *info, struct serial_struct *new_info)
++{
++ struct serial_struct new_serial;
++ struct bcm_serial old_info;
++ int retval = 0;
++
++ if (!new_info)
++ return -EFAULT;
++
++ copy_from_user (&new_serial, new_info, sizeof(new_serial));
++ old_info = *info;
++
++ if (!capable(CAP_SYS_ADMIN))
++ return -EPERM;
++
++
++ if (info->count > 1)
++ return -EBUSY;
++
++ /* OK, past this point, all the error checking has been done.
++ * At this point, we start making changes.....
++ */
++ info->baud_base = new_serial.baud_base;
++ info->type = new_serial.type;
++ info->close_delay = new_serial.close_delay;
++ info->closing_wait = new_serial.closing_wait;
++ retval = startup (info);
++ return retval;
++}
++
++/*
++ * get_lsr_info - get line status register info
++ *
++ * Purpose: Let user call ioctl() to get info when the UART physically
++ * is emptied. On bus types like RS485, the transmitter must
++ * release the bus after transmitting. This must be done when
++ * the transmit shift register is empty, not be done when the
++ * transmit holding register is empty. This functionality
++ * allows an RS485 driver to be written in user space.
++ */
++static int get_lsr_info (struct bcm_serial *info, unsigned int *value)
++{
++ return( 0 );
++}
++
++/*
++ * This routine sends a break character out the serial port.
++ */
++static void send_break (struct bcm_serial *info, int duration)
++{
++ unsigned long flags;
++
++ if (!info->port)
++ return;
++
++ current->state = TASK_INTERRUPTIBLE;
++
++ save_flags (flags);
++ cli();
++
++ info->port->control |= XMITBREAK;
++ schedule_timeout(duration);
++ info->port->control &= ~XMITBREAK;
++
++ restore_flags (flags);
++}
++
++static int bcm_ioctl (struct tty_struct * tty, struct file * file,
++ unsigned int cmd, unsigned long arg)
++{
++ int error;
++ struct bcm_serial * info = (struct bcm_serial *)tty->driver_data;
++ int retval;
++
++ if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) &&
++ (cmd != TIOCSERCONFIG) && (cmd != TIOCSERGWILD) &&
++ (cmd != TIOCSERSWILD) && (cmd != TIOCSERGSTRUCT))
++ {
++ if (tty->flags & (1 << TTY_IO_ERROR))
++ return -EIO;
++ }
++ switch (cmd)
++ {
++
++ case TCSBRK: /* SVID version: non-zero arg --> no break */
++ retval = tty_check_change (tty);
++ if (retval)
++ return retval;
++ tty_wait_until_sent (tty, 0);
++ if (!arg)
++ send_break (info, HZ/4); /* 1/4 second */
++ return 0;
++
++ case TCSBRKP: /* support for POSIX tcsendbreak() */
++ retval = tty_check_change (tty);
++ if (retval)
++ return retval;
++ tty_wait_until_sent (tty, 0);
++ send_break (info, arg ? arg*(HZ/10) : HZ/4);
++ return 0;
++
++ case TIOCGSOFTCAR:
++ error = verify_area (VERIFY_WRITE, (void *)arg, sizeof(long));
++ if (error)
++ return error;
++ put_user (C_CLOCAL(tty) ? 1 : 0, (unsigned long *)arg);
++ return 0;
++
++ case TIOCSSOFTCAR:
++ error = get_user (arg, (unsigned long *)arg);
++ if (error)
++ return error;
++ tty->termios->c_cflag = ((tty->termios->c_cflag & ~CLOCAL) | (arg ? CLOCAL : 0));
++ return 0;
++
++ case TIOCGSERIAL:
++ error = verify_area (VERIFY_WRITE, (void *)arg, sizeof(struct serial_struct));
++ if (error)
++ return error;
++ return get_serial_info (info, (struct serial_struct *)arg);
++
++ case TIOCSSERIAL:
++ return set_serial_info (info, (struct serial_struct *) arg);
++
++ case TIOCSERGETLSR: /* Get line status register */
++ error = verify_area (VERIFY_WRITE, (void *)arg, sizeof(unsigned int));
++ if (error)
++ return error;
++ else
++ return get_lsr_info (info, (unsigned int *)arg);
++
++ case TIOCSERGSTRUCT:
++ error = verify_area (VERIFY_WRITE, (void *)arg, sizeof(struct bcm_serial));
++ if (error)
++ return error;
++ copy_to_user((struct bcm_serial *)arg, info, sizeof(struct bcm_serial));
++ return 0;
++
++ default:
++ return -ENOIOCTLCMD;
++ }
++ return 0;
++}
++
++static void bcm_set_termios (struct tty_struct *tty, struct termios *old_termios)
++{
++ struct bcm_serial *info = (struct bcm_serial *)tty->driver_data;
++
++ if( tty->termios->c_cflag != old_termios->c_cflag )
++ change_speed (info->port, tty->termios->c_cflag);
++}
++
++/*
++ * ------------------------------------------------------------
++ * bcm63xx_cons_close()
++ *
++ * This routine is called when the serial port gets closed. First, we
++ * wait for the last remaining data to be sent. Then, we turn off
++ * the transmit enable and receive enable flags.
++ * ------------------------------------------------------------
++ */
++static void bcm63xx_cons_close (struct tty_struct *tty, struct file *filp)
++{
++ struct bcm_serial * info = (struct bcm_serial *)tty->driver_data;
++ unsigned long flags;
++
++ if (!info)
++ return;
++
++ save_flags (flags);
++ cli();
++
++ if (tty_hung_up_p (filp))
++ {
++ restore_flags (flags);
++ return;
++ }
++
++ if ((tty->count == 1) && (info->count != 1))
++ {
++
++ /* Uh, oh. tty->count is 1, which means that the tty
++ * structure will be freed. Info->count should always
++ * be one in these conditions. If it's greater than
++ * one, we've got real problems, since it means the
++ * serial port won't be shutdown.
++ */
++ printk("bcm63xx_cons_close: bad serial port count; tty->count is 1, "
++ "info->count is %d\n", info->count);
++ info->count = 1;
++ }
++
++ if (--info->count < 0)
++ {
++ printk("ds_close: bad serial port count for ttys%d: %d\n",
++ info->line, info->count);
++ info->count = 0;
++ }
++
++ if (info->count)
++ {
++ restore_flags (flags);
++ return;
++ }
++
++ /* Now we wait for the transmit buffer to clear; and we notify
++ * the line discipline to only process XON/XOFF characters.
++ */
++ tty->closing = 1;
++
++ /* At this point we stop accepting input. To do this, we
++ * disable the receive line status interrupts.
++ */
++ shutdown (info);
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++ if (tty->driver->flush_buffer)
++ tty->driver->flush_buffer (tty);
++#else
++ if (tty->driver.flush_buffer)
++ tty->driver.flush_buffer (tty);
++#endif
++ if (tty->ldisc.flush_buffer)
++ tty->ldisc.flush_buffer (tty);
++
++ tty->closing = 0;
++ info->event = 0;
++ info->tty = 0;
++ if (tty->ldisc.num != ldiscs[N_TTY].num)
++ {
++ if (tty->ldisc.close)
++ (tty->ldisc.close)(tty);
++ tty->ldisc = ldiscs[N_TTY];
++ tty->termios->c_line = N_TTY;
++ if (tty->ldisc.open)
++ (tty->ldisc.open)(tty);
++ }
++ if (info->blocked_open)
++ {
++ if (info->close_delay)
++ {
++ current->state = TASK_INTERRUPTIBLE;
++ schedule_timeout(info->close_delay);
++ }
++ wake_up_interruptible (&info->open_wait);
++ }
++ wake_up_interruptible (&info->close_wait);
++
++ restore_flags (flags);
++}
++
++/*
++ * bcm_hangup () --- called by tty_hangup() when a hangup is signaled.
++ */
++static void bcm_hangup (struct tty_struct *tty)
++{
++
++ struct bcm_serial *info = (struct bcm_serial *)tty->driver_data;
++
++ shutdown (info);
++ info->event = 0;
++ info->count = 0;
++ info->tty = 0;
++ wake_up_interruptible (&info->open_wait);
++}
++
++/*
++ * ------------------------------------------------------------
++ * rs_open() and friends
++ * ------------------------------------------------------------
++ */
++static int block_til_ready (struct tty_struct *tty, struct file *filp,
++ struct bcm_serial *info)
++{
++ return 0;
++}
++
++/*
++ * This routine is called whenever a serial port is opened. It
++ * enables interrupts for a serial port. It also performs the
++ * serial-specific initialization for the tty structure.
++ */
++static int bcm63xx_cons_open (struct tty_struct * tty, struct file * filp)
++{
++ struct bcm_serial *info;
++ int retval, line;
++
++ // Make sure we're only opening on of the ports we support
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++ line = MINOR(tty->driver->cdev.dev) - tty->driver->minor_start;
++#else
++ line = MINOR(tty->device) - tty->driver.minor_start;
++#endif
++
++ if ((line < 0) || (line >= BCM_NUM_UARTS))
++ return -ENODEV;
++
++ info = lines[line];
++
++ info->port->intMask = 0; /* Clear any pending interrupts */
++ info->port->intMask = RXINT; /* Enable RX */
++
++ info->count++;
++ tty->driver_data = info;
++ info->tty = tty;
++ BcmHalInterruptEnable (INTERRUPT_ID_UART);
++
++ // Start up serial port
++ retval = startup (info);
++ if (retval)
++ return retval;
++
++ retval = block_til_ready (tty, filp, info);
++ if (retval)
++ return retval;
++
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++ info->pgrp = process_group(current);
++ info->session = current->signal->session;
++#else
++ info->session = current->session;
++ info->pgrp = current->pgrp;
++#endif
++
++ return 0;
++}
++
++/* --------------------------------------------------------------------------
++ Name: bcm63xx_serialinit
++ Purpose: Initialize our BCM63xx serial driver
++-------------------------------------------------------------------------- */
++static int __init bcm63xx_serialinit(void)
++{
++ int i, flags;
++ struct bcm_serial * info;
++
++ // Print the driver version information
++ printk(VER_STR);
++
++ memset(&serial_driver, 0, sizeof(struct tty_driver));
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++ serial_driver.owner = THIS_MODULE;
++ serial_driver.devfs_name = "tts/";
++#endif
++ serial_driver.magic = TTY_DRIVER_MAGIC;
++ serial_driver.name = "ttyS";
++ serial_driver.major = TTY_MAJOR;
++ serial_driver.minor_start = 64;
++ serial_driver.num = BCM_NUM_UARTS;
++ serial_driver.type = TTY_DRIVER_TYPE_SERIAL;
++ serial_driver.subtype = SERIAL_TYPE_NORMAL;
++ serial_driver.init_termios = tty_std_termios;
++ serial_driver.init_termios.c_cflag = B115200 | CS8 | CREAD | CLOCAL;
++ serial_driver.flags = TTY_DRIVER_REAL_RAW;
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++ serial_driver.refcount = serial_refcount;
++ serial_driver.ttys = serial_table;
++#else
++ serial_driver.refcount = &serial_refcount;
++ serial_driver.table = serial_table;
++#endif
++
++ serial_driver.termios = serial_termios;
++ serial_driver.termios_locked = serial_termios_locked;
++ serial_driver.open = bcm63xx_cons_open;
++ serial_driver.close = bcm63xx_cons_close;
++ serial_driver.write = bcm63xx_cons_write;
++ serial_driver.flush_chars = bcm63xx_cons_flush_chars;
++ serial_driver.write_room = bcm63xx_cons_write_room;
++ serial_driver.chars_in_buffer = bcm_chars_in_buffer;
++ serial_driver.flush_buffer = bcm_flush_buffer;
++ serial_driver.ioctl = bcm_ioctl;
++ serial_driver.throttle = bcm_throttle;
++ serial_driver.unthrottle = bcm_unthrottle;
++ serial_driver.send_xchar = bcm_send_xchar;
++ serial_driver.set_termios = bcm_set_termios;
++ serial_driver.stop = bcm_stop;
++ serial_driver.start = bcm_start;
++ serial_driver.hangup = bcm_hangup;
++
++ if (tty_register_driver (&serial_driver))
++ panic("Couldn't register serial driver\n");
++
++ save_flags(flags); cli();
++ for (i = 0; i < BCM_NUM_UARTS; i++)
++ {
++ info = &multi[i];
++ lines[i] = info;
++ info->port = (Uart *) ((char *)UART_BASE + (i * 0x20));
++ info->irq = (2 - i) + 8;
++ info->line = i;
++ info->tty = 0;
++ info->close_delay = 50;
++ info->closing_wait = 3000;
++ info->x_char = 0;
++ info->event = 0;
++ info->count = 0;
++ info->blocked_open = 0;
++ info->normal_termios = serial_driver.init_termios;
++ init_waitqueue_head(&info->open_wait);
++ init_waitqueue_head(&info->close_wait);
++
++ /* If we are pointing to address zero then punt - not correctly
++ * set up in setup.c to handle this.
++ */
++ if (! info->port)
++ return 0;
++ BcmHalMapInterrupt(bcm_interrupt, 0, INTERRUPT_ID_UART);
++ }
++
++ /* order matters here... the trick is that flags
++ * is updated... in request_irq - to immediatedly obliterate
++ * it is unwise.
++ */
++ restore_flags(flags);
++ return 0;
++}
++
++module_init(bcm63xx_serialinit);
++
++/* --------------------------------------------------------------------------
++ Name: bcm_console_print
++ Purpose: bcm_console_print is registered for printk.
++ The console_lock must be held when we get here.
++-------------------------------------------------------------------------- */
++static void bcm_console_print (struct console * cons, const char * str,
++ unsigned int count)
++{
++ unsigned int i;
++ //_puts(str);
++ for(i=0; i<count; i++, str++)
++ {
++ _putc(*str);
++ if (*str == 10)
++ {
++ _putc(13);
++ }
++ }
++}
++
++static struct tty_driver * bcm_console_device(struct console * c, int *index)
++{
++ *index = c->index;
++ return &serial_driver;
++}
++
++static int __init bcm_console_setup(struct console * co, char * options)
++{
++ return 0;
++}
++
++static struct console bcm_sercons = {
++ .name = "ttyS",
++ .write = bcm_console_print,
++ .device = bcm_console_device,
++ .setup = bcm_console_setup,
++ .flags = CON_PRINTBUFFER, // CON_CONSDEV, CONSOLE_LINE,
++ .index = -1,
++};
++
++static int __init bcm63xx_console_init(void)
++{
++ register_console(&bcm_sercons);
++ return 0;
++}
++
++console_initcall(bcm63xx_console_init);
+diff -urN linux-2.6.8.1/bcmdrivers/opensource/char/serial/impl1/Makefile linux-2.6.8.1-brcm63xx/bcmdrivers/opensource/char/serial/impl1/Makefile
+--- linux-2.6.8.1/bcmdrivers/opensource/char/serial/impl1/Makefile 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.8.1-brcm63xx/bcmdrivers/opensource/char/serial/impl1/Makefile 2006-06-26 09:07:10.000000000 +0200
+@@ -0,0 +1,13 @@
++# File: bcmdrivers/opensource/char/serial
++#
++# Makefile for the BCM63xx serial/console driver
++
++obj-$(CONFIG_BCM_SERIAL) += bcm63xx_cons.o
++
++EXTRA_CFLAGS += -I$(INC_BRCMDRIVER_PUB_PATH)/$(BRCM_BOARD)
++
++-include $(TOPDIR)/Rules.make
++
++clean:
++ rm -f core *.o *.a *.s
++
+diff -urN linux-2.6.8.1/bcmdrivers/opensource/char/serial/impl1/bcm63xx_cons.c linux-2.6.8.1-brcm63xx/bcmdrivers/opensource/char/serial/impl1/bcm63xx_cons.c
+--- linux-2.6.8.1/bcmdrivers/opensource/char/serial/impl1/bcm63xx_cons.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.8.1-brcm63xx/bcmdrivers/opensource/char/serial/impl1/bcm63xx_cons.c 2006-06-26 09:07:10.000000000 +0200
+@@ -0,0 +1,1035 @@
++/*
++<:copyright-gpl
++ Copyright 2002 Broadcom Corp. All Rights Reserved.
++
++ This program is free software; you can distribute it and/or modify it
++ under the terms of the GNU General Public License (Version 2) as
++ published by the Free Software Foundation.
++
++ This program is distributed in the hope it will be useful, but WITHOUT
++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
++ for more details.
++
++ You should have received a copy of the GNU General Public License along
++ with this program; if not, write to the Free Software Foundation, Inc.,
++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
++:>
++*/
++
++/* Description: Serial port driver for the BCM963XX. */
++
++#define CARDNAME "bcm963xx_serial driver"
++#define VERSION "2.0"
++#define VER_STR CARDNAME " v" VERSION "\n"
++
++
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/version.h>
++#include <linux/init.h>
++#include <linux/slab.h>
++#include <linux/interrupt.h>
++
++/* for definition of struct console */
++#include <linux/console.h>
++#include <linux/tty.h>
++#include <linux/tty_flip.h>
++#include <linux/serial.h>
++#include <asm/uaccess.h>
++
++#include <bcmtypes.h>
++#include <board.h>
++#include <bcm_map_part.h>
++#include <bcm_intr.h>
++
++extern void _putc(char);
++extern void _puts(const char *);
++
++typedef struct bcm_serial {
++ volatile Uart * port;
++ int type;
++ int flags;
++ int irq;
++ int baud_base;
++ int blocked_open;
++ unsigned short close_delay;
++ unsigned short closing_wait;
++ unsigned short line; /* port/line number */
++ unsigned short cflags; /* line configuration flag */
++ unsigned short x_char; /* xon/xoff character */
++ unsigned short read_status_mask; /* mask for read condition */
++ unsigned short ignore_status_mask; /* mask for ignore condition */
++ unsigned long event; /* mask used in BH */
++ int xmit_head; /* Position of the head */
++ int xmit_tail; /* Position of the tail */
++ int xmit_cnt; /* Count of the chars in the buffer */
++ int count; /* indicates how many times it has been opened */
++ int magic;
++
++ struct async_icount icount; /* keep track of things ... */
++ struct tty_struct *tty; /* tty associated */
++ struct termios normal_termios;
++
++ wait_queue_head_t open_wait;
++ wait_queue_head_t close_wait;
++
++ long session; /* Session of opening process */
++ long pgrp; /* pgrp of opening process */
++
++ unsigned char is_initialized;
++} Context;
++
++
++/*---------------------------------------------------------------------*/
++/* Define bits in the Interrupt Enable register */
++/*---------------------------------------------------------------------*/
++/* Enable receive interrupt */
++#define RXINT (RXFIFONE|RXOVFERR)
++
++/* Enable transmit interrupt */
++#define TXINT (TXFIFOEMT|TXUNDERR|TXOVFERR)
++
++/* Enable receiver line status interrupt */
++#define LSINT (RXBRK|RXPARERR|RXFRAMERR)
++
++#define BCM_NUM_UARTS 1
++
++#define BD_BCM63XX_TIMER_CLOCK_INPUT (FPERIPH)
++
++
++static struct bcm_serial multi[BCM_NUM_UARTS];
++static struct bcm_serial *lines[BCM_NUM_UARTS];
++static struct tty_driver serial_driver;
++static struct tty_struct *serial_table[BCM_NUM_UARTS];
++static struct termios *serial_termios[BCM_NUM_UARTS];
++static struct termios *serial_termios_locked[BCM_NUM_UARTS];
++static int serial_refcount;
++
++
++static void bcm_stop (struct tty_struct *tty);
++static void bcm_start (struct tty_struct *tty);
++static inline void receive_chars (struct bcm_serial * info);
++static int startup (struct bcm_serial *info);
++static void shutdown (struct bcm_serial * info);
++static void change_speed( volatile Uart *pUart, tcflag_t cFlag );
++static void bcm63xx_cons_flush_chars (struct tty_struct *tty);
++static int bcm63xx_cons_write (struct tty_struct *tty, int from_user,
++ const unsigned char *buf, int count);
++static int bcm63xx_cons_write_room (struct tty_struct *tty);
++static int bcm_chars_in_buffer (struct tty_struct *tty);
++static void bcm_flush_buffer (struct tty_struct *tty);
++static void bcm_throttle (struct tty_struct *tty);
++static void bcm_unthrottle (struct tty_struct *tty);
++static void bcm_send_xchar (struct tty_struct *tty, char ch);
++static int get_serial_info(struct bcm_serial *info, struct serial_struct *retinfo);
++static int set_serial_info (struct bcm_serial *info, struct serial_struct *new_info);
++static int get_lsr_info (struct bcm_serial *info, unsigned int *value);
++static void send_break (struct bcm_serial *info, int duration);
++static int bcm_ioctl (struct tty_struct * tty, struct file * file,
++ unsigned int cmd, unsigned long arg);
++static void bcm_set_termios (struct tty_struct *tty, struct termios *old_termios);
++static void bcm63xx_cons_close (struct tty_struct *tty, struct file *filp);
++static void bcm_hangup (struct tty_struct *tty);
++static int block_til_ready (struct tty_struct *tty, struct file *filp, struct bcm_serial *info);
++static int bcm63xx_cons_open (struct tty_struct * tty, struct file * filp);
++static int __init bcm63xx_serialinit(void);
++
++
++/*
++ * ------------------------------------------------------------
++ * rs_stop () and rs_start ()
++ *
++ * These routines are called before setting or resetting
++ * tty->stopped. They enable or disable transmitter interrupts,
++ * as necessary.
++ * ------------------------------------------------------------
++ */
++static void bcm_stop (struct tty_struct *tty)
++{
++}
++
++static void bcm_start (struct tty_struct *tty)
++{
++ _puts(CARDNAME " Start\n");
++}
++
++/*
++ * ------------------------------------------------------------
++ * receive_char ()
++ *
++ * This routine deals with inputs from any lines.
++ * ------------------------------------------------------------
++ */
++static inline void receive_chars (struct bcm_serial * info)
++{
++ struct tty_struct *tty = 0;
++ struct async_icount * icount;
++ int ignore = 0;
++ unsigned short status, tmp;
++ UCHAR ch = 0;
++ while ((status = info->port->intStatus) & RXINT)
++ {
++ if (status & RXFIFONE)
++ ch = info->port->Data; // Read the character
++ tty = info->tty; /* now tty points to the proper dev */
++ icount = &info->icount;
++ if (! tty)
++ break;
++ if (tty->flip.count >= TTY_FLIPBUF_SIZE)
++ break;
++ *tty->flip.char_buf_ptr = ch;
++ *tty->flip.flag_buf_ptr = 0;
++ icount->rx++;
++ if (status & RXBRK)
++ {
++ *tty->flip.flag_buf_ptr = TTY_BREAK;
++ icount->brk++;
++ }
++ // keep track of the statistics
++ if (status & (RXFRAMERR | RXPARERR | RXOVFERR))
++ {
++ if (status & RXPARERR) /* parity error */
++ icount->parity++;
++ else
++ if (status & RXFRAMERR) /* frame error */
++ icount->frame++;
++ if (status & RXOVFERR)
++ {
++ // Overflow. Reset the RX FIFO
++ info->port->fifoctl |= RSTRXFIFOS;
++ icount->overrun++;
++ }
++ // check to see if we should ignore the character
++ // and mask off conditions that should be ignored
++ if (status & info->ignore_status_mask)
++ {
++ if (++ignore > 100 )
++ break;
++ goto ignore_char;
++ }
++ // Mask off the error conditions we want to ignore
++ tmp = status & info->read_status_mask;
++ if (tmp & RXPARERR)
++ {
++ *tty->flip.flag_buf_ptr = TTY_PARITY;
++ }
++ else
++ if (tmp & RXFRAMERR)
++ {
++ *tty->flip.flag_buf_ptr = TTY_FRAME;
++ }
++ if (tmp & RXOVFERR)
++ {
++ if (tty->flip.count < TTY_FLIPBUF_SIZE)
++ {
++ tty->flip.count++;
++ tty->flip.flag_buf_ptr++;
++ tty->flip.char_buf_ptr++;
++ *tty->flip.flag_buf_ptr = TTY_OVERRUN;
++ }
++ }
++ }
++ tty->flip.flag_buf_ptr++;
++ tty->flip.char_buf_ptr++;
++ tty->flip.count++;
++ }
++ignore_char:
++ if (tty)
++ tty_flip_buffer_push(tty);
++}
++
++
++/*
++ * ------------------------------------------------------------
++ * bcm_interrupt ()
++ *
++ * this is the main interrupt routine for the chip.
++ * It deals with the multiple ports.
++ * ------------------------------------------------------------
++ */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++static irqreturn_t bcm_interrupt (int irq, void * dev, struct pt_regs * regs)
++#else
++static void bcm_interrupt (int irq, void * dev, struct pt_regs * regs)
++#endif
++{
++ struct bcm_serial * info = lines[0];
++ UINT16 intStat;
++
++ /* get pending interrupt flags from UART */
++
++ /* Mask with only the serial interrupts that are enabled */
++ intStat = info->port->intStatus & info->port->intMask;
++ while (intStat)
++ {
++ if (intStat & RXINT)
++ receive_chars (info);
++ else
++ if (intStat & TXINT)
++ info->port->intStatus = TXINT;
++ else /* don't know what it was, so let's mask it */
++ info->port->intMask &= ~intStat;
++
++ intStat = info->port->intStatus & info->port->intMask;
++ }
++
++ // Clear the interrupt
++ BcmHalInterruptEnable (INTERRUPT_ID_UART);
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++ return IRQ_HANDLED;
++#endif
++}
++
++/*
++ * -------------------------------------------------------------------
++ * startup ()
++ *
++ * various initialization tasks
++ * -------------------------------------------------------------------
++ */
++static int startup (struct bcm_serial *info)
++{
++ // Port is already started...
++ return 0;
++}
++
++/*
++ * -------------------------------------------------------------------
++ * shutdown ()
++ *
++ * This routine will shutdown a serial port; interrupts are disabled, and
++ * DTR is dropped if the hangup on close termio flag is on.
++ * -------------------------------------------------------------------
++ */
++static void shutdown (struct bcm_serial * info)
++{
++ unsigned long flags;
++ if (!info->is_initialized)
++ return;
++
++ save_flags (flags);
++ cli ();
++
++ info->port->control &= ~(BRGEN|TXEN|RXEN);
++ if (info->tty)
++ set_bit (TTY_IO_ERROR, &info->tty->flags);
++ info->is_initialized = 0;
++
++ restore_flags (flags);
++}
++/*
++ * -------------------------------------------------------------------
++ * change_speed ()
++ *
++ * Set the baud rate, character size, parity and stop bits.
++ * -------------------------------------------------------------------
++ */
++static void change_speed( volatile Uart *pUart, tcflag_t cFlag )
++{
++ unsigned long ulFlags, ulBaud, ulClockFreqHz, ulTmp;
++ save_flags(ulFlags);
++ cli();
++ switch( cFlag & (CBAUD | CBAUDEX) )
++ {
++ case B115200:
++ ulBaud = 115200;
++ break;
++ case B57600:
++ ulBaud = 57600;
++ break;
++ case B38400:
++ ulBaud = 38400;
++ break;
++ case B19200:
++ ulBaud = 19200;
++ break;
++ case B9600:
++ ulBaud = 9600;
++ break;
++ case B4800:
++ ulBaud = 4800;
++ break;
++ case B2400:
++ ulBaud = 2400;
++ break;
++ case B1800:
++ ulBaud = 1800;
++ break;
++ case B1200:
++ ulBaud = 1200;
++ break;
++ case B600:
++ ulBaud = 600;
++ break;
++ case B300:
++ ulBaud = 300;
++ break;
++ case B200:
++ ulBaud = 200;
++ break;
++ case B150:
++ ulBaud = 150;
++ break;
++ case B134:
++ ulBaud = 134;
++ break;
++ case B110:
++ ulBaud = 110;
++ break;
++ case B75:
++ ulBaud = 75;
++ break;
++ case B50:
++ ulBaud = 50;
++ break;
++ default:
++ ulBaud = 115200;
++ break;
++ }
++
++ /* Calculate buad rate. */
++ ulClockFreqHz = BD_BCM63XX_TIMER_CLOCK_INPUT;
++ ulTmp = (ulClockFreqHz / ulBaud) / 16;
++ if( ulTmp & 0x01 )
++ ulTmp /= 2; /* Rounding up, so sub is already accounted for */
++ else
++ ulTmp = (ulTmp / 2) - 1; /* Rounding down so we must sub 1 */
++ pUart->baudword = ulTmp;
++
++ /* Set character size, stop bits and parity. */
++ switch( cFlag & CSIZE )
++ {
++ case CS5:
++ ulTmp = BITS5SYM; /* select transmit 5 bit data size */
++ break;
++ case CS6:
++ ulTmp = BITS6SYM; /* select transmit 6 bit data size */
++ break;
++ case CS7:
++ ulTmp = BITS7SYM; /* select transmit 7 bit data size */
++ break;
++ /*case CS8:*/
++ default:
++ ulTmp = BITS8SYM; /* select transmit 8 bit data size */
++ break;
++ }
++ if( cFlag & CSTOPB )
++ ulTmp |= TWOSTOP; /* select 2 stop bits */
++ else
++ ulTmp |= ONESTOP; /* select one stop bit */
++
++ /* Write these values into the config reg. */
++ pUart->config = ulTmp;
++ pUart->control &= ~(RXPARITYEN | TXPARITYEN | RXPARITYEVEN | TXPARITYEVEN);
++ switch( cFlag & (PARENB | PARODD) )
++ {
++ case PARENB|PARODD:
++ pUart->control |= RXPARITYEN | TXPARITYEN;
++ break;
++ case PARENB:
++ pUart->control |= RXPARITYEN | TXPARITYEN | RXPARITYEVEN | TXPARITYEVEN;
++ break;
++ default:
++ pUart->control |= 0;
++ break;
++ }
++
++ /* Reset and flush uart */
++ pUart->fifoctl = RSTTXFIFOS | RSTRXFIFOS;
++ restore_flags( ulFlags );
++}
++
++
++/*
++ * -------------------------------------------------------------------
++ * bcm_flush_char ()
++ *
++ * Nothing to flush. Polled I/O is used.
++ * -------------------------------------------------------------------
++ */
++static void bcm63xx_cons_flush_chars (struct tty_struct *tty)
++{
++}
++
++
++/*
++ * -------------------------------------------------------------------
++ * bcm63xx_cons_write ()
++ *
++ * Main output routine using polled I/O.
++ * -------------------------------------------------------------------
++ */
++static int bcm63xx_cons_write (struct tty_struct *tty, int from_user,
++ const unsigned char *buf, int count)
++{
++ int c;
++
++ for (c = 0; c < count; c++)
++ _putc(buf[c]);
++ return count;
++}
++
++/*
++ * -------------------------------------------------------------------
++ * bcm63xx_cons_write_room ()
++ *
++ * Compute the amount of space available for writing.
++ * -------------------------------------------------------------------
++ */
++static int bcm63xx_cons_write_room (struct tty_struct *tty)
++{
++ /* Pick a number. Any number. Polled I/O is used. */
++ return 1024;
++}
++
++/*
++ * -------------------------------------------------------------------
++ * bcm_chars_in_buffer ()
++ *
++ * compute the amount of char left to be transmitted
++ * -------------------------------------------------------------------
++ */
++static int bcm_chars_in_buffer (struct tty_struct *tty)
++{
++ return 0;
++}
++
++/*
++ * -------------------------------------------------------------------
++ * bcm_flush_buffer ()
++ *
++ * Empty the output buffer
++ * -------------------------------------------------------------------
++ */
++static void bcm_flush_buffer (struct tty_struct *tty)
++{
++}
++
++/*
++ * ------------------------------------------------------------
++ * bcm_throttle () and bcm_unthrottle ()
++ *
++ * This routine is called by the upper-layer tty layer to signal that
++ * incoming characters should be throttled (or not).
++ * ------------------------------------------------------------
++ */
++static void bcm_throttle (struct tty_struct *tty)
++{
++ struct bcm_serial *info = (struct bcm_serial *)tty->driver_data;
++ if (I_IXOFF(tty))
++ info->x_char = STOP_CHAR(tty);
++}
++
++static void bcm_unthrottle (struct tty_struct *tty)
++{
++ struct bcm_serial *info = (struct bcm_serial *)tty->driver_data;
++ if (I_IXOFF(tty))
++ {
++ if (info->x_char)
++ info->x_char = 0;
++ else
++ info->x_char = START_CHAR(tty);
++ }
++}
++
++static void bcm_send_xchar (struct tty_struct *tty, char ch)
++{
++ struct bcm_serial *info = (struct bcm_serial *)tty->driver_data;
++ info->x_char = ch;
++ if (ch)
++ bcm_start (info->tty);
++}
++
++/*
++ * ------------------------------------------------------------
++ * rs_ioctl () and friends
++ * ------------------------------------------------------------
++ */
++static int get_serial_info(struct bcm_serial *info, struct serial_struct *retinfo)
++{
++ struct serial_struct tmp;
++
++ if (!retinfo)
++ return -EFAULT;
++
++ memset (&tmp, 0, sizeof(tmp));
++ tmp.type = info->type;
++ tmp.line = info->line;
++ tmp.port = (int) info->port;
++ tmp.irq = info->irq;
++ tmp.flags = 0;
++ tmp.baud_base = info->baud_base;
++ tmp.close_delay = info->close_delay;
++ tmp.closing_wait = info->closing_wait;
++
++ return copy_to_user (retinfo, &tmp, sizeof(*retinfo));
++}
++
++static int set_serial_info (struct bcm_serial *info, struct serial_struct *new_info)
++{
++ struct serial_struct new_serial;
++ struct bcm_serial old_info;
++ int retval = 0;
++
++ if (!new_info)
++ return -EFAULT;
++
++ copy_from_user (&new_serial, new_info, sizeof(new_serial));
++ old_info = *info;
++
++ if (!capable(CAP_SYS_ADMIN))
++ return -EPERM;
++
++
++ if (info->count > 1)
++ return -EBUSY;
++
++ /* OK, past this point, all the error checking has been done.
++ * At this point, we start making changes.....
++ */
++ info->baud_base = new_serial.baud_base;
++ info->type = new_serial.type;
++ info->close_delay = new_serial.close_delay;
++ info->closing_wait = new_serial.closing_wait;
++ retval = startup (info);
++ return retval;
++}
++
++/*
++ * get_lsr_info - get line status register info
++ *
++ * Purpose: Let user call ioctl() to get info when the UART physically
++ * is emptied. On bus types like RS485, the transmitter must
++ * release the bus after transmitting. This must be done when
++ * the transmit shift register is empty, not be done when the
++ * transmit holding register is empty. This functionality
++ * allows an RS485 driver to be written in user space.
++ */
++static int get_lsr_info (struct bcm_serial *info, unsigned int *value)
++{
++ return( 0 );
++}
++
++/*
++ * This routine sends a break character out the serial port.
++ */
++static void send_break (struct bcm_serial *info, int duration)
++{
++ unsigned long flags;
++
++ if (!info->port)
++ return;
++
++ current->state = TASK_INTERRUPTIBLE;
++
++ save_flags (flags);
++ cli();
++
++ info->port->control |= XMITBREAK;
++ schedule_timeout(duration);
++ info->port->control &= ~XMITBREAK;
++
++ restore_flags (flags);
++}
++
++static int bcm_ioctl (struct tty_struct * tty, struct file * file,
++ unsigned int cmd, unsigned long arg)
++{
++ int error;
++ struct bcm_serial * info = (struct bcm_serial *)tty->driver_data;
++ int retval;
++
++ if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) &&
++ (cmd != TIOCSERCONFIG) && (cmd != TIOCSERGWILD) &&
++ (cmd != TIOCSERSWILD) && (cmd != TIOCSERGSTRUCT))
++ {
++ if (tty->flags & (1 << TTY_IO_ERROR))
++ return -EIO;
++ }
++ switch (cmd)
++ {
++
++ case TCSBRK: /* SVID version: non-zero arg --> no break */
++ retval = tty_check_change (tty);
++ if (retval)
++ return retval;
++ tty_wait_until_sent (tty, 0);
++ if (!arg)
++ send_break (info, HZ/4); /* 1/4 second */
++ return 0;
++
++ case TCSBRKP: /* support for POSIX tcsendbreak() */
++ retval = tty_check_change (tty);
++ if (retval)
++ return retval;
++ tty_wait_until_sent (tty, 0);
++ send_break (info, arg ? arg*(HZ/10) : HZ/4);
++ return 0;
++
++ case TIOCGSOFTCAR:
++ error = verify_area (VERIFY_WRITE, (void *)arg, sizeof(long));
++ if (error)
++ return error;
++ put_user (C_CLOCAL(tty) ? 1 : 0, (unsigned long *)arg);
++ return 0;
++
++ case TIOCSSOFTCAR:
++ error = get_user (arg, (unsigned long *)arg);
++ if (error)
++ return error;
++ tty->termios->c_cflag = ((tty->termios->c_cflag & ~CLOCAL) | (arg ? CLOCAL : 0));
++ return 0;
++
++ case TIOCGSERIAL:
++ error = verify_area (VERIFY_WRITE, (void *)arg, sizeof(struct serial_struct));
++ if (error)
++ return error;
++ return get_serial_info (info, (struct serial_struct *)arg);
++
++ case TIOCSSERIAL:
++ return set_serial_info (info, (struct serial_struct *) arg);
++
++ case TIOCSERGETLSR: /* Get line status register */
++ error = verify_area (VERIFY_WRITE, (void *)arg, sizeof(unsigned int));
++ if (error)
++ return error;
++ else
++ return get_lsr_info (info, (unsigned int *)arg);
++
++ case TIOCSERGSTRUCT:
++ error = verify_area (VERIFY_WRITE, (void *)arg, sizeof(struct bcm_serial));
++ if (error)
++ return error;
++ copy_to_user((struct bcm_serial *)arg, info, sizeof(struct bcm_serial));
++ return 0;
++
++ default:
++ return -ENOIOCTLCMD;
++ }
++ return 0;
++}
++
++static void bcm_set_termios (struct tty_struct *tty, struct termios *old_termios)
++{
++ struct bcm_serial *info = (struct bcm_serial *)tty->driver_data;
++
++ if( tty->termios->c_cflag != old_termios->c_cflag )
++ change_speed (info->port, tty->termios->c_cflag);
++}
++
++/*
++ * ------------------------------------------------------------
++ * bcm63xx_cons_close()
++ *
++ * This routine is called when the serial port gets closed. First, we
++ * wait for the last remaining data to be sent. Then, we turn off
++ * the transmit enable and receive enable flags.
++ * ------------------------------------------------------------
++ */
++static void bcm63xx_cons_close (struct tty_struct *tty, struct file *filp)
++{
++ struct bcm_serial * info = (struct bcm_serial *)tty->driver_data;
++ unsigned long flags;
++
++ if (!info)
++ return;
++
++ save_flags (flags);
++ cli();
++
++ if (tty_hung_up_p (filp))
++ {
++ restore_flags (flags);
++ return;
++ }
++
++ if ((tty->count == 1) && (info->count != 1))
++ {
++
++ /* Uh, oh. tty->count is 1, which means that the tty
++ * structure will be freed. Info->count should always
++ * be one in these conditions. If it's greater than
++ * one, we've got real problems, since it means the
++ * serial port won't be shutdown.
++ */
++ printk("bcm63xx_cons_close: bad serial port count; tty->count is 1, "
++ "info->count is %d\n", info->count);
++ info->count = 1;
++ }
++
++ if (--info->count < 0)
++ {
++ printk("ds_close: bad serial port count for ttys%d: %d\n",
++ info->line, info->count);
++ info->count = 0;
++ }
++
++ if (info->count)
++ {
++ restore_flags (flags);
++ return;
++ }
++
++ /* Now we wait for the transmit buffer to clear; and we notify
++ * the line discipline to only process XON/XOFF characters.
++ */
++ tty->closing = 1;
++
++ /* At this point we stop accepting input. To do this, we
++ * disable the receive line status interrupts.
++ */
++ shutdown (info);
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++ if (tty->driver->flush_buffer)
++ tty->driver->flush_buffer (tty);
++#else
++ if (tty->driver.flush_buffer)
++ tty->driver.flush_buffer (tty);
++#endif
++ if (tty->ldisc.flush_buffer)
++ tty->ldisc.flush_buffer (tty);
++
++ tty->closing = 0;
++ info->event = 0;
++ info->tty = 0;
++ if (tty->ldisc.num != ldiscs[N_TTY].num)
++ {
++ if (tty->ldisc.close)
++ (tty->ldisc.close)(tty);
++ tty->ldisc = ldiscs[N_TTY];
++ tty->termios->c_line = N_TTY;
++ if (tty->ldisc.open)
++ (tty->ldisc.open)(tty);
++ }
++ if (info->blocked_open)
++ {
++ if (info->close_delay)
++ {
++ current->state = TASK_INTERRUPTIBLE;
++ schedule_timeout(info->close_delay);
++ }
++ wake_up_interruptible (&info->open_wait);
++ }
++ wake_up_interruptible (&info->close_wait);
++
++ restore_flags (flags);
++}
++
++/*
++ * bcm_hangup () --- called by tty_hangup() when a hangup is signaled.
++ */
++static void bcm_hangup (struct tty_struct *tty)
++{
++
++ struct bcm_serial *info = (struct bcm_serial *)tty->driver_data;
++
++ shutdown (info);
++ info->event = 0;
++ info->count = 0;
++ info->tty = 0;
++ wake_up_interruptible (&info->open_wait);
++}
++
++/*
++ * ------------------------------------------------------------
++ * rs_open() and friends
++ * ------------------------------------------------------------
++ */
++static int block_til_ready (struct tty_struct *tty, struct file *filp,
++ struct bcm_serial *info)
++{
++ return 0;
++}
++
++/*
++ * This routine is called whenever a serial port is opened. It
++ * enables interrupts for a serial port. It also performs the
++ * serial-specific initialization for the tty structure.
++ */
++static int bcm63xx_cons_open (struct tty_struct * tty, struct file * filp)
++{
++ struct bcm_serial *info;
++ int retval, line;
++
++ // Make sure we're only opening on of the ports we support
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++ line = MINOR(tty->driver->cdev.dev) - tty->driver->minor_start;
++#else
++ line = MINOR(tty->device) - tty->driver.minor_start;
++#endif
++
++ if ((line < 0) || (line >= BCM_NUM_UARTS))
++ return -ENODEV;
++
++ info = lines[line];
++
++ info->port->intMask = 0; /* Clear any pending interrupts */
++ info->port->intMask = RXINT; /* Enable RX */
++
++ info->count++;
++ tty->driver_data = info;
++ info->tty = tty;
++ BcmHalInterruptEnable (INTERRUPT_ID_UART);
++
++ // Start up serial port
++ retval = startup (info);
++ if (retval)
++ return retval;
++
++ retval = block_til_ready (tty, filp, info);
++ if (retval)
++ return retval;
++
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++ info->pgrp = process_group(current);
++ info->session = current->signal->session;
++#else
++ info->session = current->session;
++ info->pgrp = current->pgrp;
++#endif
++
++ return 0;
++}
++
++/* --------------------------------------------------------------------------
++ Name: bcm63xx_serialinit
++ Purpose: Initialize our BCM63xx serial driver
++-------------------------------------------------------------------------- */
++static int __init bcm63xx_serialinit(void)
++{
++ int i, flags;
++ struct bcm_serial * info;
++
++ // Print the driver version information
++ printk(VER_STR);
++
++ memset(&serial_driver, 0, sizeof(struct tty_driver));
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++ serial_driver.owner = THIS_MODULE;
++ serial_driver.devfs_name = "tts/";
++#endif
++ serial_driver.magic = TTY_DRIVER_MAGIC;
++ serial_driver.name = "ttyS";
++ serial_driver.major = TTY_MAJOR;
++ serial_driver.minor_start = 64;
++ serial_driver.num = BCM_NUM_UARTS;
++ serial_driver.type = TTY_DRIVER_TYPE_SERIAL;
++ serial_driver.subtype = SERIAL_TYPE_NORMAL;
++ serial_driver.init_termios = tty_std_termios;
++ serial_driver.init_termios.c_cflag = B115200 | CS8 | CREAD | CLOCAL;
++ serial_driver.flags = TTY_DRIVER_REAL_RAW;
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++ serial_driver.refcount = serial_refcount;
++ serial_driver.ttys = serial_table;
++#else
++ serial_driver.refcount = &serial_refcount;
++ serial_driver.table = serial_table;
++#endif
++
++ serial_driver.termios = serial_termios;
++ serial_driver.termios_locked = serial_termios_locked;
++ serial_driver.open = bcm63xx_cons_open;
++ serial_driver.close = bcm63xx_cons_close;
++ serial_driver.write = bcm63xx_cons_write;
++ serial_driver.flush_chars = bcm63xx_cons_flush_chars;
++ serial_driver.write_room = bcm63xx_cons_write_room;
++ serial_driver.chars_in_buffer = bcm_chars_in_buffer;
++ serial_driver.flush_buffer = bcm_flush_buffer;
++ serial_driver.ioctl = bcm_ioctl;
++ serial_driver.throttle = bcm_throttle;
++ serial_driver.unthrottle = bcm_unthrottle;
++ serial_driver.send_xchar = bcm_send_xchar;
++ serial_driver.set_termios = bcm_set_termios;
++ serial_driver.stop = bcm_stop;
++ serial_driver.start = bcm_start;
++ serial_driver.hangup = bcm_hangup;
++
++ if (tty_register_driver (&serial_driver))
++ panic("Couldn't register serial driver\n");
++
++ save_flags(flags); cli();
++ for (i = 0; i < BCM_NUM_UARTS; i++)
++ {
++ info = &multi[i];
++ lines[i] = info;
++ info->port = (Uart *) ((char *)UART_BASE + (i * 0x20));
++ info->irq = (2 - i) + 8;
++ info->line = i;
++ info->tty = 0;
++ info->close_delay = 50;
++ info->closing_wait = 3000;
++ info->x_char = 0;
++ info->event = 0;
++ info->count = 0;
++ info->blocked_open = 0;
++ info->normal_termios = serial_driver.init_termios;
++ init_waitqueue_head(&info->open_wait);
++ init_waitqueue_head(&info->close_wait);
++
++ /* If we are pointing to address zero then punt - not correctly
++ * set up in setup.c to handle this.
++ */
++ if (! info->port)
++ return 0;
++ BcmHalMapInterrupt(bcm_interrupt, 0, INTERRUPT_ID_UART);
++ }
++
++ /* order matters here... the trick is that flags
++ * is updated... in request_irq - to immediatedly obliterate
++ * it is unwise.
++ */
++ restore_flags(flags);
++ return 0;
++}
++
++module_init(bcm63xx_serialinit);
++
++/* --------------------------------------------------------------------------
++ Name: bcm_console_print
++ Purpose: bcm_console_print is registered for printk.
++ The console_lock must be held when we get here.
++-------------------------------------------------------------------------- */
++static void bcm_console_print (struct console * cons, const char * str,
++ unsigned int count)
++{
++ unsigned int i;
++ //_puts(str);
++ for(i=0; i<count; i++, str++)
++ {
++ _putc(*str);
++ if (*str == 10)
++ {
++ _putc(13);
++ }
++ }
++}
++
++static struct tty_driver * bcm_console_device(struct console * c, int *index)
++{
++ *index = c->index;
++ return &serial_driver;
++}
++
++static int __init bcm_console_setup(struct console * co, char * options)
++{
++ return 0;
++}
++
++static struct console bcm_sercons = {
++ .name = "ttyS",
++ .write = bcm_console_print,
++ .device = bcm_console_device,
++ .setup = bcm_console_setup,
++ .flags = CON_PRINTBUFFER, // CON_CONSDEV, CONSOLE_LINE,
++ .index = -1,
++};
++
++static int __init bcm63xx_console_init(void)
++{
++ register_console(&bcm_sercons);
++ return 0;
++}
++
++console_initcall(bcm63xx_console_init);
+diff -urN linux-2.6.8.1/bcmdrivers/opensource/include/bcm963xx/6338_intr.h linux-2.6.8.1-brcm63xx/bcmdrivers/opensource/include/bcm963xx/6338_intr.h
+--- linux-2.6.8.1/bcmdrivers/opensource/include/bcm963xx/6338_intr.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.8.1-brcm63xx/bcmdrivers/opensource/include/bcm963xx/6338_intr.h 2006-06-26 09:07:10.000000000 +0200
+@@ -0,0 +1,72 @@
++/*
++<:copyright-gpl
++ Copyright 2003 Broadcom Corp. All Rights Reserved.
++
++ This program is free software; you can distribute it and/or modify it
++ under the terms of the GNU General Public License (Version 2) as
++ published by the Free Software Foundation.
++
++ This program is distributed in the hope it will be useful, but WITHOUT
++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
++ for more details.
++
++ You should have received a copy of the GNU General Public License along
++ with this program; if not, write to the Free Software Foundation, Inc.,
++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
++:>
++*/
++
++#ifndef __6338_INTR_H
++#define __6338_INTR_H
++
++#ifdef __cplusplus
++ extern "C" {
++#endif
++
++/*=====================================================================*/
++/* BCM6338 External Interrupt Level Assignments */
++/*=====================================================================*/
++#define INTERRUPT_ID_EXTERNAL_0 3
++#define INTERRUPT_ID_EXTERNAL_1 4
++#define INTERRUPT_ID_EXTERNAL_2 5
++#define INTERRUPT_ID_EXTERNAL_3 6
++
++/*=====================================================================*/
++/* BCM6338 Timer Interrupt Level Assignments */
++/*=====================================================================*/
++#define MIPS_TIMER_INT 7
++
++/*=====================================================================*/
++/* Peripheral ISR Table Offset */
++/*=====================================================================*/
++#define INTERNAL_ISR_TABLE_OFFSET 8
++
++/*=====================================================================*/
++/* Logical Peripheral Interrupt IDs */
++/*=====================================================================*/
++
++#define INTERRUPT_ID_TIMER (INTERNAL_ISR_TABLE_OFFSET + 0)
++#define INTERRUPT_ID_SPI (INTERNAL_ISR_TABLE_OFFSET + 1)
++#define INTERRUPT_ID_UART (INTERNAL_ISR_TABLE_OFFSET + 2)
++#define INTERRUPT_ID_DG (INTERNAL_ISR_TABLE_OFFSET + 4)
++#define INTERRUPT_ID_ADSL (INTERNAL_ISR_TABLE_OFFSET + 5)
++#define INTERRUPT_ID_ATM (INTERNAL_ISR_TABLE_OFFSET + 6)
++#define INTERRUPT_ID_USBS (INTERNAL_ISR_TABLE_OFFSET + 7)
++#define INTERRUPT_ID_EMAC1 (INTERNAL_ISR_TABLE_OFFSET + 8)
++#define INTERRUPT_ID_EPHY (INTERNAL_ISR_TABLE_OFFSET + 9)
++#define INTERRUPT_ID_SDRAM (INTERNAL_ISR_TABLE_OFFSET + 10)
++#define INTERRUPT_ID_USB_CNTL_RX_DMA (INTERNAL_ISR_TABLE_OFFSET + 11)
++#define INTERRUPT_ID_USB_CNTL_TX_DMA (INTERNAL_ISR_TABLE_OFFSET + 12)
++#define INTERRUPT_ID_USB_BULK_RX_DMA (INTERNAL_ISR_TABLE_OFFSET + 13)
++#define INTERRUPT_ID_USB_BULK_TX_DMA (INTERNAL_ISR_TABLE_OFFSET + 14)
++#define INTERRUPT_ID_EMAC1_RX_DMA (INTERNAL_ISR_TABLE_OFFSET + 15)
++#define INTERRUPT_ID_EMAC1_TX_DMA (INTERNAL_ISR_TABLE_OFFSET + 16)
++#define INTERRUPT_ID_SDIO (INTERNAL_ISR_TABLE_OFFSET + 17)
++
++#ifdef __cplusplus
++ }
++#endif
++
++#endif /* __BCM6338_H */
++
+diff -urN linux-2.6.8.1/bcmdrivers/opensource/include/bcm963xx/6338_map_part.h linux-2.6.8.1-brcm63xx/bcmdrivers/opensource/include/bcm963xx/6338_map_part.h
+--- linux-2.6.8.1/bcmdrivers/opensource/include/bcm963xx/6338_map_part.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.8.1-brcm63xx/bcmdrivers/opensource/include/bcm963xx/6338_map_part.h 2006-06-26 09:07:10.000000000 +0200
+@@ -0,0 +1,341 @@
++/*
++<:copyright-gpl
++ Copyright 2004 Broadcom Corp. All Rights Reserved.
++
++ This program is free software; you can distribute it and/or modify it
++ under the terms of the GNU General Public License (Version 2) as
++ published by the Free Software Foundation.
++
++ This program is distributed in the hope it will be useful, but WITHOUT
++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
++ for more details.
++
++ You should have received a copy of the GNU General Public License along
++ with this program; if not, write to the Free Software Foundation, Inc.,
++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
++:>
++*/
++
++#ifndef __BCM6338_MAP_H
++#define __BCM6338_MAP_H
++
++#if __cplusplus
++extern "C" {
++#endif
++
++#include "bcmtypes.h"
++
++#define PERF_BASE 0xfffe0000
++#define TIMR_BASE 0xfffe0200
++#define UART_BASE 0xfffe0300
++#define GPIO_BASE 0xfffe0400
++#define SPI_BASE 0xfffe0c00
++
++typedef struct PerfControl {
++ uint32 RevID;
++ uint16 testControl;
++ uint16 blkEnables;
++#define EMAC_CLK_EN 0x0010
++#define USBS_CLK_EN 0x0010
++#define SAR_CLK_EN 0x0020
++
++#define SPI_CLK_EN 0x0200
++
++ uint32 pll_control;
++#define SOFT_RESET 0x00000001
++
++ uint32 IrqMask;
++ uint32 IrqStatus;
++
++ uint32 ExtIrqCfg;
++#define EI_SENSE_SHFT 0
++#define EI_STATUS_SHFT 5
++#define EI_CLEAR_SHFT 10
++#define EI_MASK_SHFT 15
++#define EI_INSENS_SHFT 20
++#define EI_LEVEL_SHFT 25
++
++ uint32 unused[4]; /* (18) */
++ uint32 BlockSoftReset; /* (28) */
++#define BSR_SPI 0x00000001
++#define BSR_EMAC 0x00000004
++#define BSR_USBH 0x00000008
++#define BSR_USBS 0x00000010
++#define BSR_ADSL 0x00000020
++#define BSR_DMAMEM 0x00000040
++#define BSR_SAR 0x00000080
++#define BSR_ACLC 0x00000100
++#define BSR_ADSL_MIPS_PLL 0x00000400
++#define BSR_ALL_BLOCKS \
++ (BSR_SPI | BSR_EMAC | BSR_USBH | BSR_USBS | BSR_ADSL | BSR_DMAMEM | \
++ BSR_SAR | BSR_ACLC | BSR_ADSL_MIPS_PLL)
++} PerfControl;
++
++#define PERF ((volatile PerfControl * const) PERF_BASE)
++
++
++typedef struct Timer {
++ uint16 unused0;
++ byte TimerMask;
++#define TIMER0EN 0x01
++#define TIMER1EN 0x02
++#define TIMER2EN 0x04
++ byte TimerInts;
++#define TIMER0 0x01
++#define TIMER1 0x02
++#define TIMER2 0x04
++#define WATCHDOG 0x08
++ uint32 TimerCtl0;
++ uint32 TimerCtl1;
++ uint32 TimerCtl2;
++#define TIMERENABLE 0x80000000
++#define RSTCNTCLR 0x40000000
++ uint32 TimerCnt0;
++ uint32 TimerCnt1;
++ uint32 TimerCnt2;
++ uint32 WatchDogDefCount;
++
++ /* Write 0xff00 0x00ff to Start timer
++ * Write 0xee00 0x00ee to Stop and re-load default count
++ * Read from this register returns current watch dog count
++ */
++ uint32 WatchDogCtl;
++
++ /* Number of 40-MHz ticks for WD Reset pulse to last */
++ uint32 WDResetCount;
++} Timer;
++
++#define TIMER ((volatile Timer * const) TIMR_BASE)
++typedef struct UartChannel {
++ byte unused0;
++ byte control;
++#define BRGEN 0x80 /* Control register bit defs */
++#define TXEN 0x40
++#define RXEN 0x20
++#define LOOPBK 0x10
++#define TXPARITYEN 0x08
++#define TXPARITYEVEN 0x04
++#define RXPARITYEN 0x02
++#define RXPARITYEVEN 0x01
++
++ byte config;
++#define XMITBREAK 0x40
++#define BITS5SYM 0x00
++#define BITS6SYM 0x10
++#define BITS7SYM 0x20
++#define BITS8SYM 0x30
++#define ONESTOP 0x07
++#define TWOSTOP 0x0f
++ /* 4-LSBS represent STOP bits/char
++ * in 1/8 bit-time intervals. Zero
++ * represents 1/8 stop bit interval.
++ * Fifteen represents 2 stop bits.
++ */
++ byte fifoctl;
++#define RSTTXFIFOS 0x80
++#define RSTRXFIFOS 0x40
++ /* 5-bit TimeoutCnt is in low bits of this register.
++ * This count represents the number of characters
++ * idle times before setting receive Irq when below threshold
++ */
++ uint32 baudword;
++ /* When divide SysClk/2/(1+baudword) we should get 32*bit-rate
++ */
++
++ byte txf_levl; /* Read-only fifo depth */
++ byte rxf_levl; /* Read-only fifo depth */
++ byte fifocfg; /* Upper 4-bits are TxThresh, Lower are
++ * RxThreshold. Irq can be asserted
++ * when rx fifo> thresh, txfifo<thresh
++ */
++ byte prog_out; /* Set value of DTR (Bit0), RTS (Bit1)
++ * if these bits are also enabled to GPIO_o
++ */
++#define DTREN 0x01
++#define RTSEN 0x02
++
++ byte unused1;
++ byte DeltaIPEdgeNoSense; /* Low 4-bits, set corr bit to 1 to
++ * detect irq on rising AND falling
++ * edges for corresponding GPIO_i
++ * if enabled (edge insensitive)
++ */
++ byte DeltaIPConfig_Mask; /* Upper 4 bits: 1 for posedge sense
++ * 0 for negedge sense if
++ * not configured for edge
++ * insensitive (see above)
++ * Lower 4 bits: Mask to enable change
++ * detection IRQ for corresponding
++ * GPIO_i
++ */
++ byte DeltaIP_SyncIP; /* Upper 4 bits show which bits
++ * have changed (may set IRQ).
++ * read automatically clears bit
++ * Lower 4 bits are actual status
++ */
++
++ uint16 intMask; /* Same Bit defs for Mask and status */
++ uint16 intStatus;
++#define DELTAIP 0x0001
++#define TXUNDERR 0x0002
++#define TXOVFERR 0x0004
++#define TXFIFOTHOLD 0x0008
++#define TXREADLATCH 0x0010
++#define TXFIFOEMT 0x0020
++#define RXUNDERR 0x0040
++#define RXOVFERR 0x0080
++#define RXTIMEOUT 0x0100
++#define RXFIFOFULL 0x0200
++#define RXFIFOTHOLD 0x0400
++#define RXFIFONE 0x0800
++#define RXFRAMERR 0x1000
++#define RXPARERR 0x2000
++#define RXBRK 0x4000
++
++ uint16 unused2;
++ uint16 Data; /* Write to TX, Read from RX */
++ /* bits 11:8 are BRK,PAR,FRM errors */
++
++ uint32 unused3;
++ uint32 unused4;
++} Uart;
++
++#define UART ((volatile Uart * const) UART_BASE)
++
++typedef struct GpioControl {
++ uint32 unused0;
++ uint32 GPIODir; /* bits 7:0 */
++ uint32 unused1;
++ uint32 GPIOio; /* bits 7:0 */
++ uint32 LEDCtrl;
++#define LED3_STROBE 0x08000000
++#define LED2_STROBE 0x04000000
++#define LED1_STROBE 0x02000000
++#define LED0_STROBE 0x01000000
++#define LED_TEST 0x00010000
++#define LED3_DISABLE_LINK_ACT 0x00008000
++#define LED2_DISABLE_LINK_ACT 0x00004000
++#define LED1_DISABLE_LINK_ACT 0x00002000
++#define LED0_DISABLE_LINK_ACT 0x00001000
++#define LED_INTERVAL_SET_MASK 0x00000f00
++#define LED_INTERVAL_SET_320MS 0x00000500
++#define LED_INTERVAL_SET_160MS 0x00000400
++#define LED_INTERVAL_SET_80MS 0x00000300
++#define LED_INTERVAL_SET_40MS 0x00000200
++#define LED_INTERVAL_SET_20MS 0x00000100
++#define LED3_ON 0x00000080
++#define LED2_ON 0x00000040
++#define LED1_ON 0x00000020
++#define LED0_ON 0x00000010
++#define LED3_ENABLE 0x00000008
++#define LED2_ENABLE 0x00000004
++#define LED1_ENABLE 0x00000002
++#define LED0_ENABLE 0x00000001
++ uint32 SpiSlaveCfg;
++#define SPI_SLAVE_RESET 0x00010000
++#define SPI_RESTRICT 0x00000400
++#define SPI_DELAY_DISABLE 0x00000200
++#define SPI_PROBE_MUX_SEL_MASK 0x000001e0
++#define SPI_SER_ADDR_CFG_MASK 0x0000000c
++#define SPI_MODE 0x00000001
++ uint32 vRegConfig;
++} GpioControl;
++
++#define GPIO ((volatile GpioControl * const) GPIO_BASE)
++
++/* Number to mask conversion macro used for GPIODir and GPIOio */
++#define GPIO_NUM_MAX_BITS_MASK 0x0f
++#define GPIO_NUM_TO_MASK(X) (1 << ((X) & GPIO_NUM_MAX_BITS_MASK))
++
++/*
++** Spi Controller
++*/
++
++typedef struct SpiControl {
++ uint16 spiCmd; /* (0x0): SPI command */
++#define SPI_CMD_START_IMMEDIATE 3
++
++#define SPI_CMD_COMMAND_SHIFT 0
++#define SPI_CMD_DEVICE_ID_SHIFT 4
++#define SPI_CMD_PREPEND_BYTE_CNT_SHIFT 8
++
++ byte spiIntStatus; /* (0x2): SPI interrupt status */
++ byte spiMaskIntStatus; /* (0x3): SPI masked interrupt status */
++
++ byte spiIntMask; /* (0x4): SPI interrupt mask */
++#define SPI_INTR_CMD_DONE 0x01
++#define SPI_INTR_CLEAR_ALL 0x1f
++
++ byte spiStatus; /* (0x5): SPI status */
++
++ byte spiClkCfg; /* (0x6): SPI clock configuration */
++
++ byte spiFillByte; /* (0x7): SPI fill byte */
++
++ byte unused0;
++ byte spiMsgTail; /* (0x9): msgtail */
++ byte unused1;
++ byte spiRxTail; /* (0xB): rxtail */
++
++ uint32 unused2[13]; /* (0x0c - 0x3c) reserved */
++
++ byte spiMsgCtl; /* (0x40) control byte */
++#define HALF_DUPLEX_W 1
++#define HALF_DUPLEX_R 2
++#define SPI_MSG_TYPE_SHIFT 6
++#define SPI_BYTE_CNT_SHIFT 0
++ byte spiMsgData[63]; /* (0x41 - 0x7f) msg data */
++ byte spiRxDataFifo[64]; /* (0x80 - 0xbf) rx data */
++ byte unused3[64]; /* (0xc0 - 0xff) reserved */
++} SpiControl;
++
++#define SPI ((volatile SpiControl * const) SPI_BASE)
++
++/*
++** External Bus Interface
++*/
++typedef struct EbiChipSelect {
++ uint32 base; /* base address in upper 24 bits */
++#define EBI_SIZE_8K 0
++#define EBI_SIZE_16K 1
++#define EBI_SIZE_32K 2
++#define EBI_SIZE_64K 3
++#define EBI_SIZE_128K 4
++#define EBI_SIZE_256K 5
++#define EBI_SIZE_512K 6
++#define EBI_SIZE_1M 7
++#define EBI_SIZE_2M 8
++#define EBI_SIZE_4M 9
++#define EBI_SIZE_8M 10
++#define EBI_SIZE_16M 11
++#define EBI_SIZE_32M 12
++#define EBI_SIZE_64M 13
++#define EBI_SIZE_128M 14
++#define EBI_SIZE_256M 15
++ uint32 config;
++#define EBI_ENABLE 0x00000001 /* .. enable this range */
++#define EBI_WAIT_STATES 0x0000000e /* .. mask for wait states */
++#define EBI_WTST_SHIFT 1 /* .. for shifting wait states */
++#define EBI_WORD_WIDE 0x00000010 /* .. 16-bit peripheral, else 8 */
++#define EBI_WREN 0x00000020 /* enable posted writes */
++#define EBI_POLARITY 0x00000040 /* .. set to invert something,
++ ** don't know what yet */
++#define EBI_TS_TA_MODE 0x00000080 /* .. use TS/TA mode */
++#define EBI_TS_SEL 0x00000100 /* .. drive tsize, not bs_b */
++#define EBI_FIFO 0x00000200 /* .. use fifo */
++#define EBI_RE 0x00000400 /* .. Reverse Endian */
++} EbiChipSelect;
++
++typedef struct MpiRegisters {
++ EbiChipSelect cs[1]; /* size chip select configuration */
++} MpiRegisters;
++
++#define MPI ((volatile MpiRegisters * const) MPI_BASE)
++
++#if __cplusplus
++}
++#endif
++
++#endif
++
+diff -urN linux-2.6.8.1/bcmdrivers/opensource/include/bcm963xx/6345_intr.h linux-2.6.8.1-brcm63xx/bcmdrivers/opensource/include/bcm963xx/6345_intr.h
+--- linux-2.6.8.1/bcmdrivers/opensource/include/bcm963xx/6345_intr.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.8.1-brcm63xx/bcmdrivers/opensource/include/bcm963xx/6345_intr.h 2006-06-26 09:07:10.000000000 +0200
+@@ -0,0 +1,78 @@
++/*
++<:copyright-gpl
++ Copyright 2002 Broadcom Corp. All Rights Reserved.
++
++ This program is free software; you can distribute it and/or modify it
++ under the terms of the GNU General Public License (Version 2) as
++ published by the Free Software Foundation.
++
++ This program is distributed in the hope it will be useful, but WITHOUT
++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
++ for more details.
++
++ You should have received a copy of the GNU General Public License along
++ with this program; if not, write to the Free Software Foundation, Inc.,
++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
++:>
++*/
++
++#ifndef __6345_INTR_H
++#define __6345_INTR_H
++
++#ifdef __cplusplus
++ extern "C" {
++#endif
++
++/*=====================================================================*/
++/* BCM6345 External Interrupt Level Assignments */
++/*=====================================================================*/
++#define INTERRUPT_ID_EXTERNAL_0 3
++#define INTERRUPT_ID_EXTERNAL_1 4
++#define INTERRUPT_ID_EXTERNAL_2 5
++#define INTERRUPT_ID_EXTERNAL_3 6
++
++/*=====================================================================*/
++/* BCM6345 Timer Interrupt Level Assignments */
++/*=====================================================================*/
++#define MIPS_TIMER_INT 7
++
++/*=====================================================================*/
++/* Peripheral ISR Table Offset */
++/*=====================================================================*/
++#define INTERNAL_ISR_TABLE_OFFSET 8
++#define DMA_ISR_TABLE_OFFSET (INTERNAL_ISR_TABLE_OFFSET + 13)
++
++/*=====================================================================*/
++/* Logical Peripheral Interrupt IDs */
++/*=====================================================================*/
++
++/* Internal peripheral interrupt IDs */
++#define INTERRUPT_ID_TIMER (INTERNAL_ISR_TABLE_OFFSET + 0)
++#define INTERRUPT_ID_UART (INTERNAL_ISR_TABLE_OFFSET + 2)
++#define INTERRUPT_ID_ADSL (INTERNAL_ISR_TABLE_OFFSET + 3)
++#define INTERRUPT_ID_ATM (INTERNAL_ISR_TABLE_OFFSET + 4)
++#define INTERRUPT_ID_USB (INTERNAL_ISR_TABLE_OFFSET + 5)
++#define INTERRUPT_ID_EMAC (INTERNAL_ISR_TABLE_OFFSET + 8)
++#define INTERRUPT_ID_EPHY (INTERNAL_ISR_TABLE_OFFSET + 12)
++
++/* DMA channel interrupt IDs */
++#define INTERRUPT_ID_EMAC_RX_CHAN (DMA_ISR_TABLE_OFFSET + EMAC_RX_CHAN)
++#define INTERRUPT_ID_EMAC_TX_CHAN (DMA_ISR_TABLE_OFFSET + EMAC_TX_CHAN)
++#define INTERRUPT_ID_EBI_RX_CHAN (DMA_ISR_TABLE_OFFSET + EBI_RX_CHAN)
++#define INTERRUPT_ID_EBI_TX_CHAN (DMA_ISR_TABLE_OFFSET + EBI_TX_CHAN)
++#define INTERRUPT_ID_RESERVED_RX_CHAN (DMA_ISR_TABLE_OFFSET + RESERVED_RX_CHAN)
++#define INTERRUPT_ID_RESERVED_TX_CHAN (DMA_ISR_TABLE_OFFSET + RESERVED_TX_CHAN)
++#define INTERRUPT_ID_USB_BULK_RX_CHAN (DMA_ISR_TABLE_OFFSET + USB_BULK_RX_CHAN)
++#define INTERRUPT_ID_USB_BULK_TX_CHAN (DMA_ISR_TABLE_OFFSET + USB_BULK_TX_CHAN)
++#define INTERRUPT_ID_USB_CNTL_RX_CHAN (DMA_ISR_TABLE_OFFSET + USB_CNTL_RX_CHAN)
++#define INTERRUPT_ID_USB_CNTL_TX_CHAN (DMA_ISR_TABLE_OFFSET + USB_CNTL_TX_CHAN)
++#define INTERRUPT_ID_USB_ISO_RX_CHAN (DMA_ISR_TABLE_OFFSET + USB_ISO_RX_CHAN)
++#define INTERRUPT_ID_USB_ISO_TX_CHAN (DMA_ISR_TABLE_OFFSET + USB_ISO_TX_CHAN)
++
++#ifdef __cplusplus
++ }
++#endif
++
++#endif /* __BCM6345_H */
++
+diff -urN linux-2.6.8.1/bcmdrivers/opensource/include/bcm963xx/6345_map_part.h linux-2.6.8.1-brcm63xx/bcmdrivers/opensource/include/bcm963xx/6345_map_part.h
+--- linux-2.6.8.1/bcmdrivers/opensource/include/bcm963xx/6345_map_part.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.8.1-brcm63xx/bcmdrivers/opensource/include/bcm963xx/6345_map_part.h 2006-06-26 09:07:10.000000000 +0200
+@@ -0,0 +1,169 @@
++/*
++<:copyright-gpl
++ Copyright 2002 Broadcom Corp. All Rights Reserved.
++
++ This program is free software; you can distribute it and/or modify it
++ under the terms of the GNU General Public License (Version 2) as
++ published by the Free Software Foundation.
++
++ This program is distributed in the hope it will be useful, but WITHOUT
++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
++ for more details.
++
++ You should have received a copy of the GNU General Public License along
++ with this program; if not, write to the Free Software Foundation, Inc.,
++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
++:>
++*/
++
++#ifndef __BCM6345_MAP_H
++#define __BCM6345_MAP_H
++
++#if __cplusplus
++extern "C" {
++#endif
++
++#include "bcmtypes.h"
++#include "6345_intr.h"
++
++typedef struct IntControl {
++ uint32 RevID;
++ uint16 testControl;
++ uint16 blkEnables;
++#define USB_CLK_EN 0x0100
++#define EMAC_CLK_EN 0x0080
++#define UART_CLK_EN 0x0008
++#define CPU_CLK_EN 0x0001
++
++ uint32 pll_control;
++#define SOFT_RESET 0x00000001
++
++ uint32 IrqMask;
++ uint32 IrqStatus;
++
++ uint32 ExtIrqCfg;
++#define EI_SENSE_SHFT 0
++#define EI_STATUS_SHFT 4
++#define EI_CLEAR_SHFT 8
++#define EI_MASK_SHFT 12
++#define EI_INSENS_SHFT 16
++#define EI_LEVEL_SHFT 20
++} IntControl;
++
++#define INTC_BASE 0xfffe0000
++#define PERF ((volatile IntControl * const) INTC_BASE)
++
++#define TIMR_BASE 0xfffe0200
++typedef struct Timer {
++ uint16 unused0;
++ byte TimerMask;
++#define TIMER0EN 0x01
++#define TIMER1EN 0x02
++#define TIMER2EN 0x04
++ byte TimerInts;
++#define TIMER0 0x01
++#define TIMER1 0x02
++#define TIMER2 0x04
++#define WATCHDOG 0x08
++ uint32 TimerCtl0;
++ uint32 TimerCtl1;
++ uint32 TimerCtl2;
++#define TIMERENABLE 0x80000000
++#define RSTCNTCLR 0x40000000
++ uint32 TimerCnt0;
++ uint32 TimerCnt1;
++ uint32 TimerCnt2;
++ uint32 WatchDogDefCount;
++
++ /* Write 0xff00 0x00ff to Start timer
++ * Write 0xee00 0x00ee to Stop and re-load default count
++ * Read from this register returns current watch dog count
++ */
++ uint32 WatchDogCtl;
++
++ /* Number of 40-MHz ticks for WD Reset pulse to last */
++ uint32 WDResetCount;
++} Timer;
++
++#define TIMER ((volatile Timer * const) TIMR_BASE)
++
++typedef struct UartChannel {
++ byte unused0;
++ byte control;
++#define BRGEN 0x80 /* Control register bit defs */
++#define TXEN 0x40
++#define RXEN 0x20
++#define TXPARITYEN 0x08
++#define TXPARITYEVEN 0x04
++#define RXPARITYEN 0x02
++#define RXPARITYEVEN 0x01
++ byte config;
++#define BITS5SYM 0x00
++#define BITS6SYM 0x10
++#define BITS7SYM 0x20
++#define BITS8SYM 0x30
++#define XMITBREAK 0x40
++#define ONESTOP 0x07
++#define TWOSTOP 0x0f
++
++ byte fifoctl;
++#define RSTTXFIFOS 0x80
++#define RSTRXFIFOS 0x40
++ uint32 baudword;
++
++ byte txf_levl;
++ byte rxf_levl;
++ byte fifocfg;
++ byte prog_out;
++
++ byte unused1;
++ byte DeltaIPEdgeNoSense;
++ byte DeltaIPConfig_Mask;
++ byte DeltaIP_SyncIP;
++ uint16 intMask;
++ uint16 intStatus;
++#define TXUNDERR 0x0002
++#define TXOVFERR 0x0004
++#define TXFIFOEMT 0x0020
++#define RXOVFERR 0x0080
++#define RXFIFONE 0x0800
++#define RXFRAMERR 0x1000
++#define RXPARERR 0x2000
++#define RXBRK 0x4000
++
++ uint16 unused2;
++ uint16 Data;
++ uint32 unused3;
++ uint32 unused4;
++} Uart;
++
++#define UART_BASE 0xfffe0300
++#define UART ((volatile Uart * const) UART_BASE)
++
++typedef struct GpioControl {
++ uint16 unused0;
++ byte unused1;
++ byte TBusSel;
++
++ uint16 unused2;
++ uint16 GPIODir;
++ byte unused3;
++ byte Leds;
++ uint16 GPIOio;
++
++ uint32 UartCtl;
++} GpioControl;
++
++#define GPIO_BASE 0xfffe0400
++#define GPIO ((volatile GpioControl * const) GPIO_BASE)
++
++#define GPIO_NUM_MAX_BITS_MASK 0x0f
++#define GPIO_NUM_TO_MASK(X) (1 << ((X) & GPIO_NUM_MAX_BITS_MASK))
++
++#if __cplusplus
++}
++#endif
++
++#endif
++
+diff -urN linux-2.6.8.1/bcmdrivers/opensource/include/bcm963xx/6348_intr.h linux-2.6.8.1-brcm63xx/bcmdrivers/opensource/include/bcm963xx/6348_intr.h
+--- linux-2.6.8.1/bcmdrivers/opensource/include/bcm963xx/6348_intr.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.8.1-brcm63xx/bcmdrivers/opensource/include/bcm963xx/6348_intr.h 2006-06-26 09:07:10.000000000 +0200
+@@ -0,0 +1,80 @@
++/*
++<:copyright-gpl
++ Copyright 2003 Broadcom Corp. All Rights Reserved.
++
++ This program is free software; you can distribute it and/or modify it
++ under the terms of the GNU General Public License (Version 2) as
++ published by the Free Software Foundation.
++
++ This program is distributed in the hope it will be useful, but WITHOUT
++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
++ for more details.
++
++ You should have received a copy of the GNU General Public License along
++ with this program; if not, write to the Free Software Foundation, Inc.,
++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
++:>
++*/
++
++#ifndef __6348_INTR_H
++#define __6348_INTR_H
++
++#ifdef __cplusplus
++ extern "C" {
++#endif
++
++/*=====================================================================*/
++/* BCM6348 External Interrupt Level Assignments */
++/*=====================================================================*/
++#define INTERRUPT_ID_EXTERNAL_0 3
++#define INTERRUPT_ID_EXTERNAL_1 4
++#define INTERRUPT_ID_EXTERNAL_2 5
++#define INTERRUPT_ID_EXTERNAL_3 6
++
++/*=====================================================================*/
++/* BCM6348 Timer Interrupt Level Assignments */
++/*=====================================================================*/
++#define MIPS_TIMER_INT 7
++
++/*=====================================================================*/
++/* Peripheral ISR Table Offset */
++/*=====================================================================*/
++#define INTERNAL_ISR_TABLE_OFFSET 8
++
++/*=====================================================================*/
++/* Logical Peripheral Interrupt IDs */
++/*=====================================================================*/
++
++#define INTERRUPT_ID_TIMER (INTERNAL_ISR_TABLE_OFFSET + 0)
++#define INTERRUPT_ID_SPI (INTERNAL_ISR_TABLE_OFFSET + 1)
++#define INTERRUPT_ID_UART (INTERNAL_ISR_TABLE_OFFSET + 2)
++#define INTERRUPT_ID_ADSL (INTERNAL_ISR_TABLE_OFFSET + 4)
++#define INTERRUPT_ID_ATM (INTERNAL_ISR_TABLE_OFFSET + 5)
++#define INTERRUPT_ID_USBS (INTERNAL_ISR_TABLE_OFFSET + 6)
++#define INTERRUPT_ID_EMAC2 (INTERNAL_ISR_TABLE_OFFSET + 7)
++#define INTERRUPT_ID_EMAC1 (INTERNAL_ISR_TABLE_OFFSET + 8)
++#define INTERRUPT_ID_EPHY (INTERNAL_ISR_TABLE_OFFSET + 9)
++#define INTERRUPT_ID_M2M (INTERNAL_ISR_TABLE_OFFSET + 10)
++#define INTERRUPT_ID_ACLC (INTERNAL_ISR_TABLE_OFFSET + 11)
++#define INTERRUPT_ID_USBH (INTERNAL_ISR_TABLE_OFFSET + 12)
++#define INTERRUPT_ID_SDRAM (INTERNAL_ISR_TABLE_OFFSET + 13)
++#define INTERRUPT_ID_USB_CNTL_RX_DMA (INTERNAL_ISR_TABLE_OFFSET + 14)
++#define INTERRUPT_ID_USB_CNTL_TX_DMA (INTERNAL_ISR_TABLE_OFFSET + 15)
++#define INTERRUPT_ID_USB_BULK_RX_DMA (INTERNAL_ISR_TABLE_OFFSET + 16)
++#define INTERRUPT_ID_USB_BULK_TX_DMA (INTERNAL_ISR_TABLE_OFFSET + 17)
++#define INTERRUPT_ID_USB_ISO_RX_DMA (INTERNAL_ISR_TABLE_OFFSET + 18)
++#define INTERRUPT_ID_USB_ISO_TX_DMA (INTERNAL_ISR_TABLE_OFFSET + 19)
++#define INTERRUPT_ID_EMAC1_RX_DMA (INTERNAL_ISR_TABLE_OFFSET + 20)
++#define INTERRUPT_ID_EMAC1_TX_DMA (INTERNAL_ISR_TABLE_OFFSET + 21)
++#define INTERRUPT_ID_EMAC2_RX_DMA (INTERNAL_ISR_TABLE_OFFSET + 22)
++#define INTERRUPT_ID_EMAC2_TX_DMA (INTERNAL_ISR_TABLE_OFFSET + 23)
++#define INTERRUPT_ID_MPI (INTERNAL_ISR_TABLE_OFFSET + 24)
++#define INTERRUPT_ID_DG (INTERNAL_ISR_TABLE_OFFSET + 25)
++
++#ifdef __cplusplus
++ }
++#endif
++
++#endif /* __BCM6348_H */
++
+diff -urN linux-2.6.8.1/bcmdrivers/opensource/include/bcm963xx/6348_map_part.h linux-2.6.8.1-brcm63xx/bcmdrivers/opensource/include/bcm963xx/6348_map_part.h
+--- linux-2.6.8.1/bcmdrivers/opensource/include/bcm963xx/6348_map_part.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.8.1-brcm63xx/bcmdrivers/opensource/include/bcm963xx/6348_map_part.h 2006-06-26 09:07:10.000000000 +0200
+@@ -0,0 +1,508 @@
++/*
++<:copyright-gpl
++ Copyright 2002 Broadcom Corp. All Rights Reserved.
++
++ This program is free software; you can distribute it and/or modify it
++ under the terms of the GNU General Public License (Version 2) as
++ published by the Free Software Foundation.
++
++ This program is distributed in the hope it will be useful, but WITHOUT
++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
++ for more details.
++
++ You should have received a copy of the GNU General Public License along
++ with this program; if not, write to the Free Software Foundation, Inc.,
++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
++:>
++*/
++
++#ifndef __BCM6348_MAP_H
++#define __BCM6348_MAP_H
++
++#if __cplusplus
++extern "C" {
++#endif
++
++#include "bcmtypes.h"
++
++#define PERF_BASE 0xfffe0000
++#define TIMR_BASE 0xfffe0200
++#define UART_BASE 0xfffe0300
++#define GPIO_BASE 0xfffe0400
++#define MPI_BASE 0xfffe2000 /* MPI control registers */
++#define USB_HOST_BASE 0xfffe1b00 /* USB host registers */
++#define USB_HOST_NON_OHCI 0xfffe1c00 /* USB host non-OHCI registers */
++
++typedef struct PerfControl {
++ uint32 RevID;
++ uint16 testControl;
++ uint16 blkEnables;
++#define EMAC_CLK_EN 0x0010
++#define SAR_CLK_EN 0x0020
++#define USBS_CLK_EN 0x0040
++#define USBH_CLK_EN 0x0100
++
++ uint32 pll_control;
++#define SOFT_RESET 0x00000001
++
++ uint32 IrqMask;
++ uint32 IrqStatus;
++
++ uint32 ExtIrqCfg;
++#define EI_SENSE_SHFT 0
++#define EI_STATUS_SHFT 5
++#define EI_CLEAR_SHFT 10
++#define EI_MASK_SHFT 15
++#define EI_INSENS_SHFT 20
++#define EI_LEVEL_SHFT 25
++
++ uint32 unused[4]; /* (18) */
++ uint32 BlockSoftReset; /* (28) */
++#define BSR_SPI 0x00000001
++#define BSR_EMAC 0x00000004
++#define BSR_USBH 0x00000008
++#define BSR_USBS 0x00000010
++#define BSR_ADSL 0x00000020
++#define BSR_DMAMEM 0x00000040
++#define BSR_SAR 0x00000080
++#define BSR_ACLC 0x00000100
++#define BSR_ADSL_MIPS_PLL 0x00000400
++#define BSR_ALL_BLOCKS \
++ (BSR_SPI | BSR_EMAC | BSR_USBH | BSR_USBS | BSR_ADSL | BSR_DMAMEM | \
++ BSR_SAR | BSR_ACLC | BSR_ADSL_MIPS_PLL)
++ uint32 unused2[2]; /* (2c) */
++ uint32 PllStrap; /* (34) */
++#define PLL_N1_SHFT 20
++#define PLL_N1_MASK (7<<PLL_N1_SHFT)
++#define PLL_N2_SHFT 15
++#define PLL_N2_MASK (0x1f<<PLL_N2_SHFT)
++#define PLL_M1_REF_SHFT 12
++#define PLL_M1_REF_MASK (7<<PLL_M1_REF_SHFT)
++#define PLL_M2_REF_SHFT 9
++#define PLL_M2_REF_MASK (7<<PLL_M2_REF_SHFT)
++#define PLL_M1_CPU_SHFT 6
++#define PLL_M1_CPU_MASK (7<<PLL_M1_CPU_SHFT)
++#define PLL_M1_BUS_SHFT 3
++#define PLL_M1_BUS_MASK (7<<PLL_M1_BUS_SHFT)
++#define PLL_M2_BUS_SHFT 0
++#define PLL_M2_BUS_MASK (7<<PLL_M2_BUS_SHFT)
++} PerfControl;
++
++#define PERF ((volatile PerfControl * const) PERF_BASE)
++
++typedef struct Timer {
++ uint16 unused0;
++ byte TimerMask;
++#define TIMER0EN 0x01
++#define TIMER1EN 0x02
++#define TIMER2EN 0x04
++ byte TimerInts;
++#define TIMER0 0x01
++#define TIMER1 0x02
++#define TIMER2 0x04
++#define WATCHDOG 0x08
++ uint32 TimerCtl0;
++ uint32 TimerCtl1;
++ uint32 TimerCtl2;
++#define TIMERENABLE 0x80000000
++#define RSTCNTCLR 0x40000000
++ uint32 TimerCnt0;
++ uint32 TimerCnt1;
++ uint32 TimerCnt2;
++ uint32 WatchDogDefCount;
++
++ /* Write 0xff00 0x00ff to Start timer
++ * Write 0xee00 0x00ee to Stop and re-load default count
++ * Read from this register returns current watch dog count
++ */
++ uint32 WatchDogCtl;
++
++ /* Number of 40-MHz ticks for WD Reset pulse to last */
++ uint32 WDResetCount;
++} Timer;
++
++#define TIMER ((volatile Timer * const) TIMR_BASE)
++
++typedef struct UartChannel {
++ byte unused0;
++ byte control;
++#define BRGEN 0x80 /* Control register bit defs */
++#define TXEN 0x40
++#define RXEN 0x20
++#define LOOPBK 0x10
++#define TXPARITYEN 0x08
++#define TXPARITYEVEN 0x04
++#define RXPARITYEN 0x02
++#define RXPARITYEVEN 0x01
++
++ byte config;
++#define XMITBREAK 0x40
++#define BITS5SYM 0x00
++#define BITS6SYM 0x10
++#define BITS7SYM 0x20
++#define BITS8SYM 0x30
++#define ONESTOP 0x07
++#define TWOSTOP 0x0f
++ /* 4-LSBS represent STOP bits/char
++ * in 1/8 bit-time intervals. Zero
++ * represents 1/8 stop bit interval.
++ * Fifteen represents 2 stop bits.
++ */
++ byte fifoctl;
++#define RSTTXFIFOS 0x80
++#define RSTRXFIFOS 0x40
++ /* 5-bit TimeoutCnt is in low bits of this register.
++ * This count represents the number of characters
++ * idle times before setting receive Irq when below threshold
++ */
++ uint32 baudword;
++ /* When divide SysClk/2/(1+baudword) we should get 32*bit-rate
++ */
++
++ byte txf_levl; /* Read-only fifo depth */
++ byte rxf_levl; /* Read-only fifo depth */
++ byte fifocfg; /* Upper 4-bits are TxThresh, Lower are
++ * RxThreshold. Irq can be asserted
++ * when rx fifo> thresh, txfifo<thresh
++ */
++ byte prog_out; /* Set value of DTR (Bit0), RTS (Bit1)
++ * if these bits are also enabled to GPIO_o
++ */
++#define DTREN 0x01
++#define RTSEN 0x02
++
++ byte unused1;
++ byte DeltaIPEdgeNoSense; /* Low 4-bits, set corr bit to 1 to
++ * detect irq on rising AND falling
++ * edges for corresponding GPIO_i
++ * if enabled (edge insensitive)
++ */
++ byte DeltaIPConfig_Mask; /* Upper 4 bits: 1 for posedge sense
++ * 0 for negedge sense if
++ * not configured for edge
++ * insensitive (see above)
++ * Lower 4 bits: Mask to enable change
++ * detection IRQ for corresponding
++ * GPIO_i
++ */
++ byte DeltaIP_SyncIP; /* Upper 4 bits show which bits
++ * have changed (may set IRQ).
++ * read automatically clears bit
++ * Lower 4 bits are actual status
++ */
++
++ uint16 intMask; /* Same Bit defs for Mask and status */
++ uint16 intStatus;
++#define DELTAIP 0x0001
++#define TXUNDERR 0x0002
++#define TXOVFERR 0x0004
++#define TXFIFOTHOLD 0x0008
++#define TXREADLATCH 0x0010
++#define TXFIFOEMT 0x0020
++#define RXUNDERR 0x0040
++#define RXOVFERR 0x0080
++#define RXTIMEOUT 0x0100
++#define RXFIFOFULL 0x0200
++#define RXFIFOTHOLD 0x0400
++#define RXFIFONE 0x0800
++#define RXFRAMERR 0x1000
++#define RXPARERR 0x2000
++#define RXBRK 0x4000
++
++ uint16 unused2;
++ uint16 Data; /* Write to TX, Read from RX */
++ /* bits 11:8 are BRK,PAR,FRM errors */
++
++ uint32 unused3;
++ uint32 unused4;
++} Uart;
++
++#define UART ((volatile Uart * const) UART_BASE)
++
++typedef struct GpioControl {
++ uint32 GPIODir_high; /* bits 36:32 */
++ uint32 GPIODir; /* bits 31:00 */
++ uint32 GPIOio_high; /* bits 36:32 */
++ uint32 GPIOio; /* bits 31:00 */
++ uint32 LEDCtrl;
++#define LED3_STROBE 0x08000000
++#define LED2_STROBE 0x04000000
++#define LED1_STROBE 0x02000000
++#define LED0_STROBE 0x01000000
++#define LED_TEST 0x00010000
++#define LED3_DISABLE_LINK_ACT 0x00008000
++#define LED2_DISABLE_LINK_ACT 0x00004000
++#define LED1_DISABLE_LINK_ACT 0x00002000
++#define LED0_DISABLE_LINK_ACT 0x00001000
++#define LED_INTERVAL_SET_MASK 0x00000f00
++#define LED_INTERVAL_SET_320MS 0x00000500
++#define LED_INTERVAL_SET_160MS 0x00000400
++#define LED_INTERVAL_SET_80MS 0x00000300
++#define LED_INTERVAL_SET_40MS 0x00000200
++#define LED_INTERVAL_SET_20MS 0x00000100
++#define LED3_ON 0x00000080
++#define LED2_ON 0x00000040
++#define LED1_ON 0x00000020
++#define LED0_ON 0x00000010
++#define LED3_ENABLE 0x00000008
++#define LED2_ENABLE 0x00000004
++#define LED1_ENABLE 0x00000002
++#define LED0_ENABLE 0x00000001
++ uint32 SpiSlaveCfg;
++#define SPI_SLAVE_RESET 0x00010000
++#define SPI_RESTRICT 0x00000400
++#define SPI_DELAY_DISABLE 0x00000200
++#define SPI_PROBE_MUX_SEL_MASK 0x000001e0
++#define SPI_SER_ADDR_CFG_MASK 0x0000000c
++#define SPI_MODE 0x00000001
++ uint32 GPIOMode;
++#define GROUP4_DIAG 0x00090000
++#define GROUP4_UTOPIA 0x00080000
++#define GROUP4_LEGACY_LED 0x00030000
++#define GROUP4_MII_SNOOP 0x00020000
++#define GROUP4_EXT_EPHY 0x00010000
++#define GROUP3_DIAG 0x00009000
++#define GROUP3_UTOPIA 0x00008000
++#define GROUP3_EXT_MII 0x00007000
++#define GROUP2_DIAG 0x00000900
++#define GROUP2_PCI 0x00000500
++#define GROUP1_DIAG 0x00000090
++#define GROUP1_UTOPIA 0x00000080
++#define GROUP1_SPI_UART 0x00000060
++#define GROUP1_SPI_MASTER 0x00000060
++#define GROUP1_MII_PCCARD 0x00000040
++#define GROUP1_MII_SNOOP 0x00000020
++#define GROUP1_EXT_EPHY 0x00000010
++#define GROUP0_DIAG 0x00000009
++#define GROUP0_EXT_MII 0x00000007
++
++} GpioControl;
++
++#define GPIO ((volatile GpioControl * const) GPIO_BASE)
++
++/* Number to mask conversion macro used for GPIODir and GPIOio */
++#define GPIO_NUM_TOTAL_BITS_MASK 0x3f
++#define GPIO_NUM_MAX_BITS_MASK 0x1f
++#define GPIO_NUM_TO_MASK(X) ( (((X) & GPIO_NUM_TOTAL_BITS_MASK) < 32) ? (1 << ((X) & GPIO_NUM_MAX_BITS_MASK)) : (0) )
++
++/* Number to mask conversion macro used for GPIODir_high and GPIOio_high */
++#define GPIO_NUM_MAX_BITS_MASK_HIGH 0x07
++#define GPIO_NUM_TO_MASK_HIGH(X) ( (((X) & GPIO_NUM_TOTAL_BITS_MASK) >= 32) ? (1 << ((X-32) & GPIO_NUM_MAX_BITS_MASK_HIGH)) : (0) )
++
++
++/*
++** External Bus Interface
++*/
++typedef struct EbiChipSelect {
++ uint32 base; /* base address in upper 24 bits */
++#define EBI_SIZE_8K 0
++#define EBI_SIZE_16K 1
++#define EBI_SIZE_32K 2
++#define EBI_SIZE_64K 3
++#define EBI_SIZE_128K 4
++#define EBI_SIZE_256K 5
++#define EBI_SIZE_512K 6
++#define EBI_SIZE_1M 7
++#define EBI_SIZE_2M 8
++#define EBI_SIZE_4M 9
++#define EBI_SIZE_8M 10
++#define EBI_SIZE_16M 11
++#define EBI_SIZE_32M 12
++#define EBI_SIZE_64M 13
++#define EBI_SIZE_128M 14
++#define EBI_SIZE_256M 15
++ uint32 config;
++#define EBI_ENABLE 0x00000001 /* .. enable this range */
++#define EBI_WAIT_STATES 0x0000000e /* .. mask for wait states */
++#define EBI_WTST_SHIFT 1 /* .. for shifting wait states */
++#define EBI_WORD_WIDE 0x00000010 /* .. 16-bit peripheral, else 8 */
++#define EBI_WREN 0x00000020 /* enable posted writes */
++#define EBI_POLARITY 0x00000040 /* .. set to invert something,
++ ** don't know what yet */
++#define EBI_TS_TA_MODE 0x00000080 /* .. use TS/TA mode */
++#define EBI_TS_SEL 0x00000100 /* .. drive tsize, not bs_b */
++#define EBI_FIFO 0x00000200 /* .. use fifo */
++#define EBI_RE 0x00000400 /* .. Reverse Endian */
++} EbiChipSelect;
++
++typedef struct MpiRegisters {
++ EbiChipSelect cs[7]; /* size chip select configuration */
++#define EBI_CS0_BASE 0
++#define EBI_CS1_BASE 1
++#define EBI_CS2_BASE 2
++#define EBI_CS3_BASE 3
++#define PCMCIA_COMMON_BASE 4
++#define PCMCIA_ATTRIBUTE_BASE 5
++#define PCMCIA_IO_BASE 6
++ uint32 unused0[2]; /* reserved */
++ uint32 ebi_control; /* ebi control */
++ uint32 unused1[4]; /* reserved */
++#define EBI_ACCESS_TIMEOUT 0x000007FF
++ uint32 pcmcia_cntl1; /* pcmcia control 1 */
++#define PCCARD_CARD_RESET 0x00040000
++#define CARDBUS_ENABLE 0x00008000
++#define PCMCIA_ENABLE 0x00004000
++#define PCMCIA_GPIO_ENABLE 0x00002000
++#define CARDBUS_IDSEL 0x00001F00
++#define VS2_OEN 0x00000080
++#define VS1_OEN 0x00000040
++#define VS2_OUT 0x00000020
++#define VS1_OUT 0x00000010
++#define VS2_IN 0x00000008
++#define VS1_IN 0x00000004
++#define CD2_IN 0x00000002
++#define CD1_IN 0x00000001
++#define VS_MASK 0x0000000C
++#define CD_MASK 0x00000003
++ uint32 unused2; /* reserved */
++ uint32 pcmcia_cntl2; /* pcmcia control 2 */
++#define PCMCIA_BYTESWAP_DIS 0x00000002
++#define PCMCIA_HALFWORD_EN 0x00000001
++#define RW_ACTIVE_CNT_BIT 2
++#define INACTIVE_CNT_BIT 8
++#define CE_SETUP_CNT_BIT 16
++#define CE_HOLD_CNT_BIT 24
++ uint32 unused3[40]; /* reserved */
++
++ uint32 sp0range; /* PCI to internal system bus address space */
++ uint32 sp0remap;
++ uint32 sp0cfg;
++ uint32 sp1range;
++ uint32 sp1remap;
++ uint32 sp1cfg;
++
++ uint32 EndianCfg;
++
++ uint32 l2pcfgctl; /* internal system bus to PCI IO/Cfg control */
++#define DIR_CFG_SEL 0x80000000 /* change from PCI I/O access to PCI config access */
++#define DIR_CFG_USEREG 0x40000000 /* use this register info for PCI configuration access */
++#define DEVICE_NUMBER 0x00007C00 /* device number for the PCI configuration access */
++#define FUNC_NUMBER 0x00000300 /* function number for the PCI configuration access */
++#define REG_NUMBER 0x000000FC /* register number for the PCI configuration access */
++#define CONFIG_TYPE 0x00000003 /* configuration type for the PCI configuration access */
++
++ uint32 l2pmrange1; /* internal system bus to PCI memory space */
++#define PCI_SIZE_64K 0xFFFF0000
++#define PCI_SIZE_128K 0xFFFE0000
++#define PCI_SIZE_256K 0xFFFC0000
++#define PCI_SIZE_512K 0xFFF80000
++#define PCI_SIZE_1M 0xFFF00000
++#define PCI_SIZE_2M 0xFFE00000
++#define PCI_SIZE_4M 0xFFC00000
++#define PCI_SIZE_8M 0xFF800000
++#define PCI_SIZE_16M 0xFF000000
++#define PCI_SIZE_32M 0xFE000000
++ uint32 l2pmbase1; /* kseg0 or kseg1 address & 0x1FFFFFFF */
++ uint32 l2pmremap1;
++#define CARDBUS_MEM 0x00000004
++#define MEM_WINDOW_EN 0x00000001
++ uint32 l2pmrange2;
++ uint32 l2pmbase2;
++ uint32 l2pmremap2;
++ uint32 l2piorange; /* internal system bus to PCI I/O space */
++ uint32 l2piobase;
++ uint32 l2pioremap;
++
++ uint32 pcimodesel;
++#define PCI2_INT_BUS_RD_PREFECH 0x000000F0
++#define PCI_BAR2_NOSWAP 0x00000002 /* BAR at offset 0x20 */
++#define PCI_BAR1_NOSWAP 0x00000001 /* BAR at affset 0x1c */
++
++ uint32 pciintstat; /* PCI interrupt mask/status */
++#define MAILBOX1_SENT 0x08
++#define MAILBOX0_SENT 0x04
++#define MAILBOX1_MSG_RCV 0x02
++#define MAILBOX0_MSG_RCV 0x01
++ uint32 locbuscntrl; /* internal system bus control */
++#define DIR_U2P_NOSWAP 0x00000002
++#define EN_PCI_GPIO 0x00000001
++ uint32 locintstat; /* internal system bus interrupt mask/status */
++#define CSERR 0x0200
++#define SERR 0x0100
++#define EXT_PCI_INT 0x0080
++#define DIR_FAILED 0x0040
++#define DIR_COMPLETE 0x0020
++#define PCI_CFG 0x0010
++ uint32 unused5[7];
++
++ uint32 mailbox0;
++ uint32 mailbox1;
++
++ uint32 pcicfgcntrl; /* internal system bus PCI configuration control */
++#define PCI_CFG_REG_WRITE_EN 0x00000080
++#define PCI_CFG_ADDR 0x0000003C
++ uint32 pcicfgdata; /* internal system bus PCI configuration data */
++
++ uint32 locch2ctl; /* PCI to interrnal system bus DMA (downstream) local control */
++#define MPI_DMA_HALT 0x00000008 /* idle after finish current memory burst */
++#define MPI_DMA_PKT_HALT 0x00000004 /* idle after an EOP flag is detected */
++#define MPI_DMA_STALL 0x00000002 /* idle after an EOP flag is detected */
++#define MPI_DMA_ENABLE 0x00000001 /* set to enable channel */
++ uint32 locch2intStat;
++#define MPI_DMA_NO_DESC 0x00000004 /* no valid descriptors */
++#define MPI_DMA_DONE 0x00000002 /* packet xfer complete */
++#define MPI_DMA_BUFF_DONE 0x00000001 /* buffer done */
++ uint32 locch2intMask;
++ uint32 unused6;
++ uint32 locch2descaddr;
++ uint32 locch2status1;
++#define LOCAL_DESC_STATE 0xE0000000
++#define PCI_DESC_STATE 0x1C000000
++#define BYTE_DONE 0x03FFC000
++#define RING_ADDR 0x00003FFF
++ uint32 locch2status2;
++#define BUFPTR_OFFSET 0x1FFF0000
++#define PCI_MASTER_STATE 0x000000C0
++#define LOC_MASTER_STATE 0x00000038
++#define CONTROL_STATE 0x00000007
++ uint32 unused7;
++
++ uint32 locch1Ctl; /*internal system bus to PCI DMA (upstream) local control */
++#define DMA_U2P_LE 0x00000200 /* local bus is little endian */
++#define DMA_U2P_NOSWAP 0x00000100 /* lccal bus is little endian but no data swapped */
++ uint32 locch1intstat;
++ uint32 locch1intmask;
++ uint32 unused8;
++ uint32 locch1descaddr;
++ uint32 locch1status1;
++ uint32 locch1status2;
++ uint32 unused9;
++
++ uint32 pcich1ctl; /* internal system bus to PCI DMA PCI control */
++ uint32 pcich1intstat;
++ uint32 pcich1intmask;
++ uint32 pcich1descaddr;
++ uint32 pcich1status1;
++ uint32 pcich1status2;
++
++ uint32 pcich2Ctl; /* PCI to internal system bus DMA PCI control */
++ uint32 pcich2intstat;
++ uint32 pcich2intmask;
++ uint32 pcich2descaddr;
++ uint32 pcich2status1;
++ uint32 pcich2status2;
++
++ uint32 perm_id; /* permanent device and vendor id */
++ uint32 perm_rev; /* permanent revision id */
++} MpiRegisters;
++
++#define MPI ((volatile MpiRegisters * const) MPI_BASE)
++
++/* PCI configuration address space start offset 0x40 */
++#define BRCM_PCI_CONFIG_TIMER 0x40
++#define BRCM_PCI_CONFIG_TIMER_RETRY_MASK 0x0000FF00
++#define BRCM_PCI_CONFIG_TIMER_TRDY_MASK 0x000000FF
++
++/* USB host non-Open HCI register, USB_HOST_NON_OHCI, bit definitions. */
++#define NON_OHCI_ENABLE_PORT1 0x00000001 /* Use USB port 1 for host, not dev */
++#define NON_OHCI_BYTE_SWAP 0x00000008 /* Swap USB host registers */
++
++#define USBH_NON_OHCI ((volatile unsigned long * const) USB_HOST_NON_OHCI)
++
++#if __cplusplus
++}
++#endif
++
++#endif
++
+diff -urN linux-2.6.8.1/bcmdrivers/opensource/include/bcm963xx/bcmTag.h linux-2.6.8.1-brcm63xx/bcmdrivers/opensource/include/bcm963xx/bcmTag.h
+--- linux-2.6.8.1/bcmdrivers/opensource/include/bcm963xx/bcmTag.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.8.1-brcm63xx/bcmdrivers/opensource/include/bcm963xx/bcmTag.h 2006-06-26 09:07:10.000000000 +0200
+@@ -0,0 +1,153 @@
++/*
++<:copyright-gpl
++ Copyright 2002 Broadcom Corp. All Rights Reserved.
++
++ This program is free software; you can distribute it and/or modify it
++ under the terms of the GNU General Public License (Version 2) as
++ published by the Free Software Foundation.
++
++ This program is distributed in the hope it will be useful, but WITHOUT
++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
++ for more details.
++
++ You should have received a copy of the GNU General Public License along
++ with this program; if not, write to the Free Software Foundation, Inc.,
++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
++:>
++*/
++//**************************************************************************************
++// File Name : bcmTag.h
++//
++// Description: add tag with validation system to the firmware image file to be uploaded
++// via http
++//
++// Created : 02/28/2002 seanl
++//**************************************************************************************
++
++#ifndef _BCMTAG_H_
++#define _BCMTAG_H_
++
++
++#define BCM_SIG_1 "Broadcom Corporation"
++#define BCM_SIG_2 "ver. 2.0" // was "firmware version 2.0" now it is split 6 char out for chip id.
++
++#define BCM_TAG_VER "6"
++#define BCM_TAG_VER_LAST "26"
++
++// file tag (head) structure all is in clear text except validationTokens (crc, md5, sha1, etc). Total: 128 unsigned chars
++#define TAG_LEN 256
++#define TAG_VER_LEN 4
++#define SIG_LEN 20
++#define SIG_LEN_2 14 // Original second SIG = 20 is now devided into 14 for SIG_LEN_2 and 6 for CHIP_ID
++#define CHIP_ID_LEN 6
++#define IMAGE_LEN 10
++#define ADDRESS_LEN 12
++#define FLAG_LEN 2
++#define TOKEN_LEN 20
++#define BOARD_ID_LEN 16
++#define RESERVED_LEN (TAG_LEN - TAG_VER_LEN - SIG_LEN - SIG_LEN_2 - CHIP_ID_LEN - BOARD_ID_LEN - \
++ (4*IMAGE_LEN) - (3*ADDRESS_LEN) - (3*FLAG_LEN) - (2*TOKEN_LEN))
++
++
++// TAG for downloadable image (kernel plus file system)
++typedef struct _FILE_TAG
++{
++ unsigned char tagVersion[TAG_VER_LEN]; // tag version. Will be 2 here.
++ unsigned char signiture_1[SIG_LEN]; // text line for company info
++ unsigned char signiture_2[SIG_LEN_2]; // additional info (can be version number)
++ unsigned char chipId[CHIP_ID_LEN]; // chip id
++ unsigned char boardId[BOARD_ID_LEN]; // board id
++ unsigned char bigEndian[FLAG_LEN]; // if = 1 - big, = 0 - little endia of the host
++ unsigned char totalImageLen[IMAGE_LEN]; // the sum of all the following length
++ unsigned char cfeAddress[ADDRESS_LEN]; // if non zero, cfe starting address
++ unsigned char cfeLen[IMAGE_LEN]; // if non zero, cfe size in clear ASCII text.
++ unsigned char rootfsAddress[ADDRESS_LEN]; // if non zero, filesystem starting address
++ unsigned char rootfsLen[IMAGE_LEN]; // if non zero, filesystem size in clear ASCII text.
++ unsigned char kernelAddress[ADDRESS_LEN]; // if non zero, kernel starting address
++ unsigned char kernelLen[IMAGE_LEN]; // if non zero, kernel size in clear ASCII text.
++ unsigned char dualImage[FLAG_LEN]; // if 1, dual image
++ unsigned char inactiveLen[FLAG_LEN]; // if 1, the image is INACTIVE; if 0, active
++ unsigned char reserved[RESERVED_LEN]; // reserved for later use
++ unsigned char imageValidationToken[TOKEN_LEN];// image validation token - can be crc, md5, sha; for
++ // now will be 4 unsigned char crc
++ unsigned char tagValidationToken[TOKEN_LEN]; // validation token for tag(from signiture_1 to end of // mageValidationToken)
++} FILE_TAG, *PFILE_TAG;
++
++#define CRC32_INIT_VALUE 0xffffffff /* Initial CRC32 checksum value */
++#define CRC_LEN 4
++
++// only included if for bcmTag.exe program
++#ifdef BCMTAG_EXE_USE
++
++static unsigned long Crc32_table[256] = {
++ 0x00000000, 0x77073096, 0xEE0E612C, 0x990951BA,
++ 0x076DC419, 0x706AF48F, 0xE963A535, 0x9E6495A3,
++ 0x0EDB8832, 0x79DCB8A4, 0xE0D5E91E, 0x97D2D988,
++ 0x09B64C2B, 0x7EB17CBD, 0xE7B82D07, 0x90BF1D91,
++ 0x1DB71064, 0x6AB020F2, 0xF3B97148, 0x84BE41DE,
++ 0x1ADAD47D, 0x6DDDE4EB, 0xF4D4B551, 0x83D385C7,
++ 0x136C9856, 0x646BA8C0, 0xFD62F97A, 0x8A65C9EC,
++ 0x14015C4F, 0x63066CD9, 0xFA0F3D63, 0x8D080DF5,
++ 0x3B6E20C8, 0x4C69105E, 0xD56041E4, 0xA2677172,
++ 0x3C03E4D1, 0x4B04D447, 0xD20D85FD, 0xA50AB56B,
++ 0x35B5A8FA, 0x42B2986C, 0xDBBBC9D6, 0xACBCF940,
++ 0x32D86CE3, 0x45DF5C75, 0xDCD60DCF, 0xABD13D59,
++ 0x26D930AC, 0x51DE003A, 0xC8D75180, 0xBFD06116,
++ 0x21B4F4B5, 0x56B3C423, 0xCFBA9599, 0xB8BDA50F,
++ 0x2802B89E, 0x5F058808, 0xC60CD9B2, 0xB10BE924,
++ 0x2F6F7C87, 0x58684C11, 0xC1611DAB, 0xB6662D3D,
++ 0x76DC4190, 0x01DB7106, 0x98D220BC, 0xEFD5102A,
++ 0x71B18589, 0x06B6B51F, 0x9FBFE4A5, 0xE8B8D433,
++ 0x7807C9A2, 0x0F00F934, 0x9609A88E, 0xE10E9818,
++ 0x7F6A0DBB, 0x086D3D2D, 0x91646C97, 0xE6635C01,
++ 0x6B6B51F4, 0x1C6C6162, 0x856530D8, 0xF262004E,
++ 0x6C0695ED, 0x1B01A57B, 0x8208F4C1, 0xF50FC457,
++ 0x65B0D9C6, 0x12B7E950, 0x8BBEB8EA, 0xFCB9887C,
++ 0x62DD1DDF, 0x15DA2D49, 0x8CD37CF3, 0xFBD44C65,
++ 0x4DB26158, 0x3AB551CE, 0xA3BC0074, 0xD4BB30E2,
++ 0x4ADFA541, 0x3DD895D7, 0xA4D1C46D, 0xD3D6F4FB,
++ 0x4369E96A, 0x346ED9FC, 0xAD678846, 0xDA60B8D0,
++ 0x44042D73, 0x33031DE5, 0xAA0A4C5F, 0xDD0D7CC9,
++ 0x5005713C, 0x270241AA, 0xBE0B1010, 0xC90C2086,
++ 0x5768B525, 0x206F85B3, 0xB966D409, 0xCE61E49F,
++ 0x5EDEF90E, 0x29D9C998, 0xB0D09822, 0xC7D7A8B4,
++ 0x59B33D17, 0x2EB40D81, 0xB7BD5C3B, 0xC0BA6CAD,
++ 0xEDB88320, 0x9ABFB3B6, 0x03B6E20C, 0x74B1D29A,
++ 0xEAD54739, 0x9DD277AF, 0x04DB2615, 0x73DC1683,
++ 0xE3630B12, 0x94643B84, 0x0D6D6A3E, 0x7A6A5AA8,
++ 0xE40ECF0B, 0x9309FF9D, 0x0A00AE27, 0x7D079EB1,
++ 0xF00F9344, 0x8708A3D2, 0x1E01F268, 0x6906C2FE,
++ 0xF762575D, 0x806567CB, 0x196C3671, 0x6E6B06E7,
++ 0xFED41B76, 0x89D32BE0, 0x10DA7A5A, 0x67DD4ACC,
++ 0xF9B9DF6F, 0x8EBEEFF9, 0x17B7BE43, 0x60B08ED5,
++ 0xD6D6A3E8, 0xA1D1937E, 0x38D8C2C4, 0x4FDFF252,
++ 0xD1BB67F1, 0xA6BC5767, 0x3FB506DD, 0x48B2364B,
++ 0xD80D2BDA, 0xAF0A1B4C, 0x36034AF6, 0x41047A60,
++ 0xDF60EFC3, 0xA867DF55, 0x316E8EEF, 0x4669BE79,
++ 0xCB61B38C, 0xBC66831A, 0x256FD2A0, 0x5268E236,
++ 0xCC0C7795, 0xBB0B4703, 0x220216B9, 0x5505262F,
++ 0xC5BA3BBE, 0xB2BD0B28, 0x2BB45A92, 0x5CB36A04,
++ 0xC2D7FFA7, 0xB5D0CF31, 0x2CD99E8B, 0x5BDEAE1D,
++ 0x9B64C2B0, 0xEC63F226, 0x756AA39C, 0x026D930A,
++ 0x9C0906A9, 0xEB0E363F, 0x72076785, 0x05005713,
++ 0x95BF4A82, 0xE2B87A14, 0x7BB12BAE, 0x0CB61B38,
++ 0x92D28E9B, 0xE5D5BE0D, 0x7CDCEFB7, 0x0BDBDF21,
++ 0x86D3D2D4, 0xF1D4E242, 0x68DDB3F8, 0x1FDA836E,
++ 0x81BE16CD, 0xF6B9265B, 0x6FB077E1, 0x18B74777,
++ 0x88085AE6, 0xFF0F6A70, 0x66063BCA, 0x11010B5C,
++ 0x8F659EFF, 0xF862AE69, 0x616BFFD3, 0x166CCF45,
++ 0xA00AE278, 0xD70DD2EE, 0x4E048354, 0x3903B3C2,
++ 0xA7672661, 0xD06016F7, 0x4969474D, 0x3E6E77DB,
++ 0xAED16A4A, 0xD9D65ADC, 0x40DF0B66, 0x37D83BF0,
++ 0xA9BCAE53, 0xDEBB9EC5, 0x47B2CF7F, 0x30B5FFE9,
++ 0xBDBDF21C, 0xCABAC28A, 0x53B39330, 0x24B4A3A6,
++ 0xBAD03605, 0xCDD70693, 0x54DE5729, 0x23D967BF,
++ 0xB3667A2E, 0xC4614AB8, 0x5D681B02, 0x2A6F2B94,
++ 0xB40BBE37, 0xC30C8EA1, 0x5A05DF1B, 0x2D02EF8D
++};
++#endif // BCMTAG_USE
++
++
++#endif // _BCMTAG_H_
++
+diff -urN linux-2.6.8.1/bcmdrivers/opensource/include/bcm963xx/bcm_intr.h linux-2.6.8.1-brcm63xx/bcmdrivers/opensource/include/bcm963xx/bcm_intr.h
+--- linux-2.6.8.1/bcmdrivers/opensource/include/bcm963xx/bcm_intr.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.8.1-brcm63xx/bcmdrivers/opensource/include/bcm963xx/bcm_intr.h 2006-06-26 09:07:10.000000000 +0200
+@@ -0,0 +1,59 @@
++/*
++<:copyright-gpl
++ Copyright 2003 Broadcom Corp. All Rights Reserved.
++
++ This program is free software; you can distribute it and/or modify it
++ under the terms of the GNU General Public License (Version 2) as
++ published by the Free Software Foundation.
++
++ This program is distributed in the hope it will be useful, but WITHOUT
++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
++ for more details.
++
++ You should have received a copy of the GNU General Public License along
++ with this program; if not, write to the Free Software Foundation, Inc.,
++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
++:>
++*/
++
++#ifndef __BCM_INTR_H
++#define __BCM_INTR_H
++
++#ifdef __cplusplus
++ extern "C" {
++#endif
++
++#if defined(CONFIG_BCM96338)
++#include <6338_intr.h>
++#endif
++#if defined(CONFIG_BCM96345)
++#include <6345_intr.h>
++#endif
++#if defined(CONFIG_BCM96348)
++#include <6348_intr.h>
++#endif
++
++/* defines */
++struct pt_regs;
++typedef int (*FN_HANDLER) (int, void *, struct pt_regs *);
++
++/* prototypes */
++extern void enable_brcm_irq(unsigned int irq);
++extern void disable_brcm_irq(unsigned int irq);
++extern int request_external_irq(unsigned int irq,
++ FN_HANDLER handler, unsigned long irqflags,
++ const char * devname, void *dev_id);
++extern unsigned int BcmHalMapInterrupt(FN_HANDLER isr, unsigned int param,
++ unsigned int interruptId);
++extern void dump_intr_regs(void);
++
++/* compatibility definitions */
++#define BcmHalInterruptEnable(irq) enable_brcm_irq( irq )
++#define BcmHalInterruptDisable(irq) disable_brcm_irq( irq )
++
++#ifdef __cplusplus
++ }
++#endif
++
++#endif
+diff -urN linux-2.6.8.1/bcmdrivers/opensource/include/bcm963xx/bcm_map_part.h linux-2.6.8.1-brcm63xx/bcmdrivers/opensource/include/bcm963xx/bcm_map_part.h
+--- linux-2.6.8.1/bcmdrivers/opensource/include/bcm963xx/bcm_map_part.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.8.1-brcm63xx/bcmdrivers/opensource/include/bcm963xx/bcm_map_part.h 2006-06-26 09:07:10.000000000 +0200
+@@ -0,0 +1,34 @@
++/*
++<:copyright-gpl
++ Copyright 2004 Broadcom Corp. All Rights Reserved.
++
++ This program is free software; you can distribute it and/or modify it
++ under the terms of the GNU General Public License (Version 2) as
++ published by the Free Software Foundation.
++
++ This program is distributed in the hope it will be useful, but WITHOUT
++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
++ for more details.
++
++ You should have received a copy of the GNU General Public License along
++ with this program; if not, write to the Free Software Foundation, Inc.,
++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
++:>
++*/
++
++#ifndef __BCM_MAP_PART_H
++#define __BCM_MAP_PART_H
++
++#if defined(CONFIG_BCM96338)
++#include <6338_map_part.h>
++#endif
++#if defined(CONFIG_BCM96345)
++#include <6345_map_part.h>
++#endif
++#if defined(CONFIG_BCM96348)
++#include <6348_map_part.h>
++#endif
++
++#endif
++
+diff -urN linux-2.6.8.1/bcmdrivers/opensource/include/bcm963xx/bcmpci.h linux-2.6.8.1-brcm63xx/bcmdrivers/opensource/include/bcm963xx/bcmpci.h
+--- linux-2.6.8.1/bcmdrivers/opensource/include/bcm963xx/bcmpci.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.8.1-brcm63xx/bcmdrivers/opensource/include/bcm963xx/bcmpci.h 2006-06-26 09:07:10.000000000 +0200
+@@ -0,0 +1,87 @@
++/*
++<:copyright-gpl
++ Copyright 2004 Broadcom Corp. All Rights Reserved.
++
++ This program is free software; you can distribute it and/or modify it
++ under the terms of the GNU General Public License (Version 2) as
++ published by the Free Software Foundation.
++
++ This program is distributed in the hope it will be useful, but WITHOUT
++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
++ for more details.
++
++ You should have received a copy of the GNU General Public License along
++ with this program; if not, write to the Free Software Foundation, Inc.,
++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
++:>
++*/
++
++//
++// bcmpci.h - bcm96348 PCI, Cardbus, and PCMCIA definition
++//
++#ifndef BCMPCI_H
++#define BCMPCI_H
++
++/* Memory window in internal system bus address space */
++#define BCM_PCI_MEM_BASE 0x08000000
++/* IO window in internal system bus address space */
++#define BCM_PCI_IO_BASE 0x0C000000
++
++#define BCM_PCI_ADDR_MASK 0x1fffffff
++
++/* Memory window size (range) */
++#define BCM_PCI_MEM_SIZE_16MB 0x01000000
++/* IO window size (range) */
++#define BCM_PCI_IO_SIZE_64KB 0x00010000
++
++/* PCI Configuration and I/O space acesss */
++#define BCM_PCI_CFG(d, f, o) ( (d << 11) | (f << 8) | (o/4 << 2) )
++
++/* fake USB PCI slot */
++#define USB_HOST_SLOT 9
++#define USB_BAR0_MEM_SIZE 0x0800
++
++#define BCM_HOST_MEM_SPACE1 0x10000000
++#define BCM_HOST_MEM_SPACE2 0x00000000
++
++/*
++ * EBI bus clock is 33MHz and share with PCI bus
++ * each clock cycle is 30ns.
++ */
++/* attribute memory access wait cnt for 4306 */
++#define PCMCIA_ATTR_CE_HOLD 3 // data hold time 70ns
++#define PCMCIA_ATTR_CE_SETUP 3 // data setup time 50ns
++#define PCMCIA_ATTR_INACTIVE 6 // time between read/write cycles 180ns. For the total cycle time 600ns (cnt1+cnt2+cnt3+cnt4)
++#define PCMCIA_ATTR_ACTIVE 10 // OE/WE pulse width 300ns
++
++/* common memory access wait cnt for 4306 */
++#define PCMCIA_MEM_CE_HOLD 1 // data hold time 30ns
++#define PCMCIA_MEM_CE_SETUP 1 // data setup time 30ns
++#define PCMCIA_MEM_INACTIVE 2 // time between read/write cycles 40ns. For the total cycle time 250ns (cnt1+cnt2+cnt3+cnt4)
++#define PCMCIA_MEM_ACTIVE 5 // OE/WE pulse width 150ns
++
++#define PCCARD_VCC_MASK 0x00070000 // Mask Reset also
++#define PCCARD_VCC_33V 0x00010000
++#define PCCARD_VCC_50V 0x00020000
++
++typedef enum {
++ MPI_CARDTYPE_NONE, // No Card in slot
++ MPI_CARDTYPE_PCMCIA, // 16-bit PCMCIA card in slot
++ MPI_CARDTYPE_CARDBUS, // 32-bit CardBus card in slot
++} CardType;
++
++#define CARDBUS_SLOT 0 // Slot 0 is default for CardBus
++
++#define pcmciaAttrOffset 0x00200000
++#define pcmciaMemOffset 0x00000000
++// Needs to be right above PCI I/O space. Give 0x8000 (32K) to PCMCIA.
++#define pcmciaIoOffset (BCM_PCI_IO_BASE + 0x80000)
++// Base Address is that mapped into the MPI ChipSelect registers.
++// UBUS bridge MemoryWindow 0 outputs a 0x00 for the base.
++#define pcmciaBase 0xbf000000
++#define pcmciaAttr (pcmciaAttrOffset | pcmciaBase)
++#define pcmciaMem (pcmciaMemOffset | pcmciaBase)
++#define pcmciaIo (pcmciaIoOffset | pcmciaBase)
++
++#endif
+diff -urN linux-2.6.8.1/bcmdrivers/opensource/include/bcm963xx/bcmtypes.h linux-2.6.8.1-brcm63xx/bcmdrivers/opensource/include/bcm963xx/bcmtypes.h
+--- linux-2.6.8.1/bcmdrivers/opensource/include/bcm963xx/bcmtypes.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.8.1-brcm63xx/bcmdrivers/opensource/include/bcm963xx/bcmtypes.h 2006-06-26 09:07:10.000000000 +0200
+@@ -0,0 +1,163 @@
++/*
++<:copyright-gpl
++ Copyright 2002 Broadcom Corp. All Rights Reserved.
++
++ This program is free software; you can distribute it and/or modify it
++ under the terms of the GNU General Public License (Version 2) as
++ published by the Free Software Foundation.
++
++ This program is distributed in the hope it will be useful, but WITHOUT
++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
++ for more details.
++
++ You should have received a copy of the GNU General Public License along
++ with this program; if not, write to the Free Software Foundation, Inc.,
++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
++:>
++*/
++
++//
++// bcmtypes.h - misc useful typedefs
++//
++#ifndef BCMTYPES_H
++#define BCMTYPES_H
++
++// These are also defined in typedefs.h in the application area, so I need to
++// protect against re-definition.
++
++#ifndef _TYPEDEFS_H_
++typedef unsigned char uint8;
++typedef unsigned short uint16;
++typedef unsigned long uint32;
++typedef signed char int8;
++typedef signed short int16;
++typedef signed long int32;
++#if !defined(__cplusplus)
++typedef int bool;
++#endif
++#endif
++
++typedef unsigned char byte;
++// typedef unsigned long sem_t;
++
++typedef unsigned long HANDLE,*PULONG,DWORD,*PDWORD;
++typedef signed long LONG,*PLONG;
++
++typedef unsigned int *PUINT;
++typedef signed int INT;
++
++typedef unsigned short *PUSHORT;
++typedef signed short SHORT,*PSHORT;
++typedef unsigned short WORD,*PWORD;
++
++typedef unsigned char *PUCHAR;
++typedef signed char *PCHAR;
++
++typedef void *PVOID;
++
++typedef unsigned char BOOLEAN, *PBOOL, *PBOOLEAN;
++
++typedef unsigned char BYTE,*PBYTE;
++
++//#ifndef __GNUC__
++//The following has been defined in Vxworks internally: vxTypesOld.h
++//redefine under vxworks will cause error
++typedef signed int *PINT;
++
++typedef signed char INT8;
++typedef signed short INT16;
++typedef signed long INT32;
++
++typedef unsigned char UINT8;
++typedef unsigned short UINT16;
++typedef unsigned long UINT32;
++
++typedef unsigned char UCHAR;
++typedef unsigned short USHORT;
++typedef unsigned int UINT;
++typedef unsigned long ULONG;
++
++typedef void VOID;
++typedef unsigned char BOOL;
++
++//#endif /* __GNUC__ */
++
++
++// These are also defined in typedefs.h in the application area, so I need to
++// protect against re-definition.
++#ifndef TYPEDEFS_H
++
++// Maximum and minimum values for a signed 16 bit integer.
++#define MAX_INT16 32767
++#define MIN_INT16 -32768
++
++// Useful for true/false return values. This uses the
++// Taligent notation (k for constant).
++typedef enum
++{
++ kFalse = 0,
++ kTrue = 1
++} Bool;
++
++#endif
++
++/* macros to protect against unaligned accesses */
++
++#if 0
++/* first arg is an address, second is a value */
++#define PUT16( a, d ) { \
++ *((byte *)a) = (byte)((d)>>8); \
++ *(((byte *)a)+1) = (byte)(d); \
++}
++
++#define PUT32( a, d ) { \
++ *((byte *)a) = (byte)((d)>>24); \
++ *(((byte *)a)+1) = (byte)((d)>>16); \
++ *(((byte *)a)+2) = (byte)((d)>>8); \
++ *(((byte *)a)+3) = (byte)(d); \
++}
++
++/* first arg is an address, returns a value */
++#define GET16( a ) ( \
++ (*((byte *)a) << 8) | \
++ (*(((byte *)a)+1)) \
++)
++
++#define GET32( a ) ( \
++ (*((byte *)a) << 24) | \
++ (*(((byte *)a)+1) << 16) | \
++ (*(((byte *)a)+2) << 8) | \
++ (*(((byte *)a)+3)) \
++)
++#endif
++
++#ifndef YES
++#define YES 1
++#endif
++
++#ifndef NO
++#define NO 0
++#endif
++
++#ifndef IN
++#define IN
++#endif
++
++#ifndef OUT
++#define OUT
++#endif
++
++#ifndef TRUE
++#define TRUE 1
++#endif
++
++#ifndef FALSE
++#define FALSE 0
++#endif
++
++#define READ32(addr) (*(volatile UINT32 *)((ULONG)&addr))
++#define READ16(addr) (*(volatile UINT16 *)((ULONG)&addr))
++#define READ8(addr) (*(volatile UINT8 *)((ULONG)&addr))
++
++#endif
+diff -urN linux-2.6.8.1/bcmdrivers/opensource/include/bcm963xx/board.h linux-2.6.8.1-brcm63xx/bcmdrivers/opensource/include/bcm963xx/board.h
+--- linux-2.6.8.1/bcmdrivers/opensource/include/bcm963xx/board.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.8.1-brcm63xx/bcmdrivers/opensource/include/bcm963xx/board.h 2006-06-26 09:07:10.000000000 +0200
+@@ -0,0 +1,368 @@
++/*
++<:copyright-gpl
++ Copyright 2002 Broadcom Corp. All Rights Reserved.
++
++ This program is free software; you can distribute it and/or modify it
++ under the terms of the GNU General Public License (Version 2) as
++ published by the Free Software Foundation.
++
++ This program is distributed in the hope it will be useful, but WITHOUT
++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
++ for more details.
++
++ You should have received a copy of the GNU General Public License along
++ with this program; if not, write to the Free Software Foundation, Inc.,
++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
++:>
++*/
++/***********************************************************************/
++/* */
++/* MODULE: board.h */
++/* DATE: 97/02/18 */
++/* PURPOSE: Board specific information. This module should include */
++/* all base device addresses and board specific macros. */
++/* */
++/***********************************************************************/
++#ifndef _BOARD_H
++#define _BOARD_H
++
++#if __cplusplus
++extern "C" {
++#endif
++/*****************************************************************************/
++/* Misc board definitions */
++/*****************************************************************************/
++
++#define DYING_GASP_API
++
++/*****************************************************************************/
++/* Physical Memory Map */
++/*****************************************************************************/
++
++#define PHYS_DRAM_BASE 0x00000000 /* Dynamic RAM Base */
++#define PHYS_FLASH_BASE 0x1FC00000 /* Flash Memory */
++
++/*****************************************************************************/
++/* Note that the addresses above are physical addresses and that programs */
++/* have to use converted addresses defined below: */
++/*****************************************************************************/
++#define DRAM_BASE (0x80000000 | PHYS_DRAM_BASE) /* cached DRAM */
++#define DRAM_BASE_NOCACHE (0xA0000000 | PHYS_DRAM_BASE) /* uncached DRAM */
++#define FLASH_BASE (0xA0000000 | PHYS_FLASH_BASE) /* uncached Flash */
++
++/*****************************************************************************/
++/* Select the PLL value to get the desired CPU clock frequency. */
++/* */
++/* */
++/*****************************************************************************/
++#define FPERIPH 50000000
++
++#define ONEK 1024
++#define BLK64K (64*ONEK)
++#define FLASH45_BLKS_BOOT_ROM 1
++#define FLASH45_LENGTH_BOOT_ROM (FLASH45_BLKS_BOOT_ROM * BLK64K)
++#define FLASH_RESERVED_AT_END (64*ONEK) /*reserved for PSI, scratch pad*/
++
++/*****************************************************************************/
++/* Note that the addresses above are physical addresses and that programs */
++/* have to use converted addresses defined below: */
++/*****************************************************************************/
++#define DRAM_BASE (0x80000000 | PHYS_DRAM_BASE) /* cached DRAM */
++#define DRAM_BASE_NOCACHE (0xA0000000 | PHYS_DRAM_BASE) /* uncached DRAM */
++#define FLASH_BASE (0xA0000000 | PHYS_FLASH_BASE) /* uncached Flash */
++
++/*****************************************************************************/
++/* Select the PLL value to get the desired CPU clock frequency. */
++/* */
++/* */
++/*****************************************************************************/
++#define FPERIPH 50000000
++
++#define SDRAM_TYPE_ADDRESS_OFFSET 16
++#define NVRAM_DATA_OFFSET 0x0580
++#define NVRAM_DATA_ID 0x0f1e2d3c
++#define BOARD_SDRAM_TYPE *(unsigned long *) \
++ (FLASH_BASE + SDRAM_TYPE_ADDRESS_OFFSET)
++
++#define ONEK 1024
++#define BLK64K (64*ONEK)
++
++// nvram and psi flash definitions for 45
++#define FLASH45_LENGTH_NVRAM ONEK // 1k nvram
++#define NVRAM_PSI_DEFAULT 24 // default psi in K byes
++
++/*****************************************************************************/
++/* NVRAM Offset and definition */
++/*****************************************************************************/
++
++#define NVRAM_VERSION_NUMBER 2
++#define NVRAM_VERSION_NUMBER_ADDRESS 0
++
++#define NVRAM_BOOTLINE_LEN 256
++#define NVRAM_BOARD_ID_STRING_LEN 16
++#define NVRAM_MAC_ADDRESS_LEN 6
++#define NVRAM_MAC_COUNT_MAX 32
++
++/*****************************************************************************/
++/* Misc Offsets */
++/*****************************************************************************/
++
++#define CFE_VERSION_OFFSET 0x0570
++#define CFE_VERSION_MARK_SIZE 5
++#define CFE_VERSION_SIZE 5
++
++typedef struct
++{
++ unsigned long ulVersion;
++ char szBootline[NVRAM_BOOTLINE_LEN];
++ char szBoardId[NVRAM_BOARD_ID_STRING_LEN];
++ unsigned long ulReserved1[2];
++ unsigned long ulNumMacAddrs;
++ unsigned char ucaBaseMacAddr[NVRAM_MAC_ADDRESS_LEN];
++ char chReserved[2];
++ unsigned long ulCheckSum;
++} NVRAM_DATA, *PNVRAM_DATA;
++
++
++/*****************************************************************************/
++/* board ioctl calls for flash, led and some other utilities */
++/*****************************************************************************/
++
++
++/* Defines. for board driver */
++#define BOARD_IOCTL_MAGIC 'B'
++#define BOARD_DRV_MAJOR 206
++
++#define MAC_ADDRESS_ANY (unsigned long) -1
++
++#define BOARD_IOCTL_FLASH_INIT \
++ _IOWR(BOARD_IOCTL_MAGIC, 0, BOARD_IOCTL_PARMS)
++
++#define BOARD_IOCTL_FLASH_WRITE \
++ _IOWR(BOARD_IOCTL_MAGIC, 1, BOARD_IOCTL_PARMS)
++
++#define BOARD_IOCTL_FLASH_READ \
++ _IOWR(BOARD_IOCTL_MAGIC, 2, BOARD_IOCTL_PARMS)
++
++#define BOARD_IOCTL_GET_NR_PAGES \
++ _IOWR(BOARD_IOCTL_MAGIC, 3, BOARD_IOCTL_PARMS)
++
++#define BOARD_IOCTL_DUMP_ADDR \
++ _IOWR(BOARD_IOCTL_MAGIC, 4, BOARD_IOCTL_PARMS)
++
++#define BOARD_IOCTL_SET_MEMORY \
++ _IOWR(BOARD_IOCTL_MAGIC, 5, BOARD_IOCTL_PARMS)
++
++#define BOARD_IOCTL_MIPS_SOFT_RESET \
++ _IOWR(BOARD_IOCTL_MAGIC, 6, BOARD_IOCTL_PARMS)
++
++#define BOARD_IOCTL_LED_CTRL \
++ _IOWR(BOARD_IOCTL_MAGIC, 7, BOARD_IOCTL_PARMS)
++
++#define BOARD_IOCTL_GET_ID \
++ _IOWR(BOARD_IOCTL_MAGIC, 8, BOARD_IOCTL_PARMS)
++
++#define BOARD_IOCTL_GET_MAC_ADDRESS \
++ _IOWR(BOARD_IOCTL_MAGIC, 9, BOARD_IOCTL_PARMS)
++
++#define BOARD_IOCTL_RELEASE_MAC_ADDRESS \
++ _IOWR(BOARD_IOCTL_MAGIC, 10, BOARD_IOCTL_PARMS)
++
++#define BOARD_IOCTL_GET_PSI_SIZE \
++ _IOWR(BOARD_IOCTL_MAGIC, 11, BOARD_IOCTL_PARMS)
++
++#define BOARD_IOCTL_GET_SDRAM_SIZE \
++ _IOWR(BOARD_IOCTL_MAGIC, 12, BOARD_IOCTL_PARMS)
++
++#define BOARD_IOCTL_SET_MONITOR_FD \
++ _IOWR(BOARD_IOCTL_MAGIC, 13, BOARD_IOCTL_PARMS)
++
++#define BOARD_IOCTL_WAKEUP_MONITOR_TASK \
++ _IOWR(BOARD_IOCTL_MAGIC, 14, BOARD_IOCTL_PARMS)
++
++#define BOARD_IOCTL_GET_BOOTLINE \
++ _IOWR(BOARD_IOCTL_MAGIC, 15, BOARD_IOCTL_PARMS)
++
++#define BOARD_IOCTL_SET_BOOTLINE \
++ _IOWR(BOARD_IOCTL_MAGIC, 16, BOARD_IOCTL_PARMS)
++
++#define BOARD_IOCTL_GET_BASE_MAC_ADDRESS \
++ _IOWR(BOARD_IOCTL_MAGIC, 17, BOARD_IOCTL_PARMS)
++
++#define BOARD_IOCTL_GET_CHIP_ID \
++ _IOWR(BOARD_IOCTL_MAGIC, 18, BOARD_IOCTL_PARMS)
++
++#define BOARD_IOCTL_GET_NUM_ENET \
++ _IOWR(BOARD_IOCTL_MAGIC, 19, BOARD_IOCTL_PARMS)
++
++#define BOARD_IOCTL_GET_CFE_VER \
++ _IOWR(BOARD_IOCTL_MAGIC, 20, BOARD_IOCTL_PARMS)
++
++#define BOARD_IOCTL_GET_ENET_CFG \
++ _IOWR(BOARD_IOCTL_MAGIC, 21, BOARD_IOCTL_PARMS)
++
++#define BOARD_IOCTL_GET_WLAN_ANT_INUSE \
++ _IOWR(BOARD_IOCTL_MAGIC, 22, BOARD_IOCTL_PARMS)
++
++#define BOARD_IOCTL_SET_TRIGGER_EVENT \
++ _IOWR(BOARD_IOCTL_MAGIC, 23, BOARD_IOCTL_PARMS)
++
++#define BOARD_IOCTL_GET_TRIGGER_EVENT \
++ _IOWR(BOARD_IOCTL_MAGIC, 24, BOARD_IOCTL_PARMS)
++
++#define BOARD_IOCTL_UNSET_TRIGGER_EVENT \
++ _IOWR(BOARD_IOCTL_MAGIC, 25, BOARD_IOCTL_PARMS)
++
++#define BOARD_IOCTL_SET_SES_LED \
++ _IOWR(BOARD_IOCTL_MAGIC, 26, BOARD_IOCTL_PARMS)
++
++
++// for the action in BOARD_IOCTL_PARMS for flash operation
++typedef enum
++{
++ PERSISTENT,
++ NVRAM,
++ BCM_IMAGE_CFE,
++ BCM_IMAGE_FS,
++ BCM_IMAGE_KERNEL,
++ BCM_IMAGE_WHOLE,
++ SCRATCH_PAD,
++ FLASH_SIZE,
++} BOARD_IOCTL_ACTION;
++
++
++typedef struct boardIoctParms
++{
++ char *string;
++ char *buf;
++ int strLen;
++ int offset;
++ BOARD_IOCTL_ACTION action; /* flash read/write: nvram, persistent, bcm image */
++ int result;
++} BOARD_IOCTL_PARMS;
++
++
++// LED defines
++typedef enum
++{
++ kLedAdsl,
++ kLedWireless,
++ kLedUsb,
++ kLedHpna,
++ kLedWanData,
++ kLedPPP,
++ kLedVoip,
++ kLedSes,
++ kLedEnd, // NOTE: Insert the new led name before this one. Alway stay at the end.
++} BOARD_LED_NAME;
++
++typedef enum
++{
++ kLedStateOff, /* turn led off */
++ kLedStateOn, /* turn led on */
++ kLedStateFail, /* turn led on red */
++ kLedStateBlinkOnce, /* blink once, ~100ms and ignore the same call during the 100ms period */
++ kLedStateSlowBlinkContinues, /* slow blink continues at ~600ms interval */
++ kLedStateFastBlinkContinues, /* fast blink continues at ~200ms interval */
++} BOARD_LED_STATE;
++
++
++// virtual and physical map pair defined in board.c
++typedef struct ledmappair
++{
++ BOARD_LED_NAME ledName; // virtual led name
++ BOARD_LED_STATE ledInitState; // initial led state when the board boots.
++ unsigned short ledMask; // physical GPIO pin mask
++ unsigned short ledActiveLow; // reset bit to turn on LED
++ unsigned short ledMaskFail; // physical GPIO pin mask for state failure
++ unsigned short ledActiveLowFail;// reset bit to turn on LED
++} LED_MAP_PAIR, *PLED_MAP_PAIR;
++
++typedef void (*HANDLE_LED_FUNC)(BOARD_LED_NAME ledName, BOARD_LED_STATE ledState);
++
++/* Flash storage address information that is determined by the flash driver. */
++typedef struct flashaddrinfo
++{
++ int flash_persistent_start_blk;
++ int flash_persistent_number_blk;
++ int flash_persistent_length;
++ unsigned long flash_persistent_blk_offset;
++ int flash_scratch_pad_start_blk; // start before psi (SP_BUF_LEN)
++ int flash_scratch_pad_number_blk;
++ int flash_scratch_pad_length;
++ unsigned long flash_scratch_pad_blk_offset;
++ int flash_nvram_start_blk;
++ int flash_nvram_number_blk;
++ int flash_nvram_length;
++ unsigned long flash_nvram_blk_offset;
++} FLASH_ADDR_INFO, *PFLASH_ADDR_INFO;
++
++// scratch pad defines
++/* SP - Persisten Scratch Pad format:
++ sp header : 32 bytes
++ tokenId-1 : 8 bytes
++ tokenId-1 len : 4 bytes
++ tokenId-1 data
++ ....
++ tokenId-n : 8 bytes
++ tokenId-n len : 4 bytes
++ tokenId-n data
++*/
++
++#define MAGIC_NUM_LEN 8
++#define MAGIC_NUMBER "gOGoBrCm"
++#define TOKEN_NAME_LEN 16
++#define SP_VERSION 1
++#define SP_MAX_LEN 8 * 1024 // 8k buf before psi
++#define SP_RESERVERD 16
++
++typedef struct _SP_HEADER
++{
++ char SPMagicNum[MAGIC_NUM_LEN]; // 8 bytes of magic number
++ int SPVersion; // version number
++ int SPUsedLen; // used sp len
++ char SPReserved[SP_RESERVERD]; // reservied, total 32 bytes
++} SP_HEADER, *PSP_HEADER;
++
++typedef struct _TOKEN_DEF
++{
++ char tokenName[TOKEN_NAME_LEN];
++ int tokenLen;
++} SP_TOKEN, *PSP_TOKEN;
++
++
++/*****************************************************************************/
++/* Function Prototypes */
++/*****************************************************************************/
++#if !defined(__ASM_ASM_H)
++void dumpaddr( unsigned char *pAddr, int nLen );
++
++void kerSysFlashAddrInfoGet(PFLASH_ADDR_INFO pflash_addr_info);
++int kerSysNvRamGet(char *string, int strLen, int offset);
++int kerSysNvRamSet(char *string, int strLen, int offset);
++int kerSysPersistentGet(char *string, int strLen, int offset);
++int kerSysPersistentSet(char *string, int strLen, int offset);
++int kerSysScratchPadGet(char *tokName, char *tokBuf, int tokLen);
++int kerSysScratchPadSet(char *tokName, char *tokBuf, int tokLen);
++int kerSysBcmImageSet( int flash_start_addr, char *string, int size);
++int kerSysGetMacAddress( unsigned char *pucaAddr, unsigned long ulId );
++int kerSysReleaseMacAddress( unsigned char *pucaAddr );
++int kerSysGetSdramSize( void );
++void kerSysGetBootline(char *string, int strLen);
++void kerSysSetBootline(char *string, int strLen);
++void kerSysMipsSoftReset(void);
++void kerSysLedCtrl(BOARD_LED_NAME, BOARD_LED_STATE);
++void kerSysLedRegisterHwHandler( BOARD_LED_NAME, HANDLE_LED_FUNC, int );
++int kerSysFlashSizeGet(void);
++void kerSysRegisterDyingGaspHandler(char *devname, void *cbfn, void *context);
++void kerSysDeregisterDyingGaspHandler(char *devname);
++void kerSysWakeupMonitorTask( void );
++#endif
++
++#if __cplusplus
++}
++#endif
++
++#endif /* _BOARD_H */
++
+diff -urN linux-2.6.8.1/boardparams/bcm963xx/Makefile linux-2.6.8.1-brcm63xx/boardparms/bcm963xx/Makefile
+--- linux-2.6.8.1/boardparams/bcm963xx/Makefile 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.8.1-brcm63xx/boardparms/bcm963xx/Makefile 2006-06-26 09:07:10.000000000 +0200
+@@ -0,0 +1,16 @@
++
++ifeq ($(CONFIG_MIPS_BRCM),y)
++
++# Linux
++obj-y += boardparms.o
++EXTRA_CFLAGS += -DCONFIG_BCM9$(BRCM_CHIP)
++-include $(TOPDIR)/Rules.make
++
++else
++
++# CFE
++BSPOBJS += boardparms.o
++
++endif
++
++
+diff -urN linux-2.6.8.1/boardparams/bcm963xx/boardparms.c linux-2.6.8.1-brcm63xx/boardparms/bcm963xx/boardparms.c
+--- linux-2.6.8.1/boardparams/bcm963xx/boardparms.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.8.1-brcm63xx/boardparms/bcm963xx/boardparms.c 2006-06-26 09:07:10.000000000 +0200
+@@ -0,0 +1,2382 @@
++/*
++<:copyright-gpl
++
++ Copyright 2003 Broadcom Corp. All Rights Reserved.
++
++ This program is free software; you can distribute it and/or modify it
++ under the terms of the GNU General Public License (Version 2) as
++ published by the Free Software Foundation.
++
++ This program is distributed in the hope it will be useful, but WITHOUT
++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
++ for more details.
++
++ You should have received a copy of the GNU General Public License along
++ with this program; if not, write to the Free Software Foundation, Inc.,
++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
++
++:>
++*/
++/**************************************************************************
++ * File Name : boardparms.c
++ *
++ * Description: This file contains the implementation for the BCM63xx board
++ * parameter access functions.
++ *
++ * Updates : 07/14/2003 Created.
++ ***************************************************************************/
++
++/* Includes. */
++#include "boardparms.h"
++
++/* Defines. */
++
++/* Default psi size in K bytes */
++#define BP_PSI_DEFAULT_SIZE 24
++
++/* Typedefs */
++typedef struct boardparameters
++{
++ char szBoardId[BP_BOARD_ID_LEN]; /* board id string */
++ ETHERNET_MAC_INFO EnetMacInfos[BP_MAX_ENET_MACS];
++ VOIP_DSP_INFO VoIPDspInfo[BP_MAX_VOIP_DSP];
++ unsigned short usSdramSize; /* SDRAM size and type */
++ unsigned short usPsiSize; /* persistent storage in K bytes */
++ unsigned short usGpioRj11InnerPair; /* GPIO pin or not defined */
++ unsigned short usGpioRj11OuterPair; /* GPIO pin or not defined */
++ unsigned short usGpioPressAndHoldReset; /* GPIO pin or not defined */
++ unsigned short usGpioPcmciaReset; /* GPIO pin or not defined */
++ unsigned short usGpioUartRts; /* GPIO pin or not defined */
++ unsigned short usGpioUartCts; /* GPIO pin or not defined */
++ unsigned short usGpioLedAdsl; /* GPIO pin or not defined */
++ unsigned short usGpioLedAdslFail; /* GPIO pin or not defined */
++ unsigned short usGpioLedWireless; /* GPIO pin or not defined */
++ unsigned short usGpioLedUsb; /* GPIO pin or not defined */
++ unsigned short usGpioLedHpna; /* GPIO pin or not defined */
++ unsigned short usGpioLedWanData; /* GPIO pin or not defined */
++ unsigned short usGpioLedPpp; /* GPIO pin or not defined */
++ unsigned short usGpioLedPppFail; /* GPIO pin or not defined */
++ unsigned short usGpioLedBlPowerOn; /* GPIO pin or not defined */
++ unsigned short usGpioLedBlAlarm; /* GPIO pin or not defined */
++ unsigned short usGpioLedBlResetCfg; /* GPIO pin or not defined */
++ unsigned short usGpioLedBlStop; /* GPIO pin or not defined */
++ unsigned short usExtIntrWireless; /* ext intr or not defined */
++ unsigned short usExtIntrAdslDyingGasp; /* ext intr or not defined */
++ unsigned short usExtIntrHpna; /* ext intr or not defined */
++ unsigned short usCsHpna; /* chip select not defined */
++ unsigned short usAntInUseWireless; /* antenna in use or not defined */
++ unsigned short usGpioSesBtnWireless; /* GPIO pin or not defined */
++ unsigned short usExtIntrSesBtnWireless; /* ext intr or not defined */
++ unsigned short usGpioLedSesWireless; /* GPIO pin or not defined */
++} BOARD_PARAMETERS, *PBOARD_PARAMETERS;
++
++/* Variables */
++#if defined(_BCM96338_) || defined(CONFIG_BCM96338)
++static BOARD_PARAMETERS g_bcm96338sv =
++{
++ "96338SV", /* szBoardId */
++ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */
++ 0x01, /* ucPhyAddress */
++ BP_NOT_DEFINED, /* usGpioPhySpiSck */
++ BP_NOT_DEFINED, /* usGpioPhySpiSs */
++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */
++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */
++ BP_NOT_DEFINED, /* usGpioPhyReset */
++ 0x01, /* numSwitchPorts */
++ BP_ENET_CONFIG_MDIO, /* usConfigType */
++ BP_NOT_DEFINED}, /* usReverseMii */
++ {BP_ENET_NO_PHY}}, /* ucPhyType */
++ {{BP_VOIP_NO_DSP}, /* ucDspType */
++ {BP_VOIP_NO_DSP}}, /* ucDspType */
++ BP_MEMORY_16MB_1_CHIP, /* usSdramSize */
++ BP_PSI_DEFAULT_SIZE, /* usPsiSize */
++ BP_NOT_DEFINED, /* usGpioRj11InnerPair */
++ BP_NOT_DEFINED, /* usGpioRj11OuterPair */
++ BP_NOT_DEFINED, /* usGpioPressAndHoldReset */
++ BP_NOT_DEFINED, /* usGpioPcmciaReset */
++ BP_NOT_DEFINED, /* usGpioUartRts */
++ BP_NOT_DEFINED, /* usGpioUartCts */
++ BP_NOT_DEFINED, /* usGpioLedAdsl */
++ BP_NOT_DEFINED, /* usGpioLedAdslFail */
++ BP_NOT_DEFINED, /* usGpioLedWireless */
++ BP_NOT_DEFINED, /* usGpioLedUsb */
++ BP_NOT_DEFINED, /* usGpioLedHpna */
++ BP_NOT_DEFINED, /* usGpioLedWanData */
++ BP_NOT_DEFINED, /* usGpioLedPpp */
++ BP_NOT_DEFINED, /* usGpioLedPppFail */
++ BP_NOT_DEFINED, /* usGpioLedBlPowerOn */
++ BP_NOT_DEFINED, /* usGpioLedBlAlarm */
++ BP_NOT_DEFINED, /* usGpioLedBlResetCfg */
++ BP_NOT_DEFINED, /* usGpioLedBlStop */
++ BP_NOT_DEFINED, /* usExtIntrWireless */
++ BP_HW_DEFINED, /* usExtIntrAdslDyingGasp */
++ BP_NOT_DEFINED, /* usExtIntrHpna */
++ BP_NOT_DEFINED, /* usCsHpna */
++ BP_NOT_DEFINED, /* usAntInUseWireless */
++ BP_NOT_DEFINED, /* usGpioSesBtnWireless */
++ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */
++ BP_NOT_DEFINED /* usGpioLedSesWireless */
++};
++static BOARD_PARAMETERS g_bcm96338l2m8m =
++{
++ "96338L-2M-8M", /* szBoardId */
++ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */
++ 0x01, /* ucPhyAddress */
++ BP_NOT_DEFINED, /* usGpioPhySpiSck */
++ BP_NOT_DEFINED, /* usGpioPhySpiSs */
++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */
++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */
++ BP_NOT_DEFINED, /* usGpioPhyReset */
++ 0x01, /* numSwitchPorts */
++ BP_ENET_CONFIG_MDIO, /* usConfigType */
++ BP_NOT_DEFINED}, /* usReverseMii */
++ {BP_ENET_NO_PHY}}, /* ucPhyType */
++ {{BP_VOIP_NO_DSP}, /* ucDspType */
++ {BP_VOIP_NO_DSP}}, /* ucDspType */
++ BP_MEMORY_8MB_1_CHIP, /* usSdramSize */
++ BP_PSI_DEFAULT_SIZE, /* usPsiSize */
++ BP_NOT_DEFINED, /* usGpioRj11InnerPair */
++ BP_NOT_DEFINED, /* usGpioRj11OuterPair */
++ BP_NOT_DEFINED, /* usGpioPressAndHoldReset */
++ BP_NOT_DEFINED, /* usGpioPcmciaReset */
++ BP_NOT_DEFINED, /* usGpioUartRts */
++ BP_NOT_DEFINED, /* usGpioUartCts */
++ BP_NOT_DEFINED, /* usGpioLedAdsl */
++ BP_GPIO_2_AL, /* usGpioLedAdslFail */
++ BP_NOT_DEFINED, /* usGpioLedWireless */
++ BP_NOT_DEFINED, /* usGpioLedUsb */
++ BP_NOT_DEFINED, /* usGpioLedHpna */
++ BP_GPIO_3_AL, /* usGpioLedWanData */
++ BP_GPIO_3_AL, /* usGpioLedPpp */
++ BP_GPIO_4_AL, /* usGpioLedPppFail */
++ BP_GPIO_0_AL, /* usGpioLedBlPowerOn */
++ BP_NOT_DEFINED, /* usGpioLedBlAlarm */
++ BP_GPIO_3_AL, /* usGpioLedBlResetCfg */
++ BP_GPIO_1_AL, /* usGpioLedBlStop */
++ BP_NOT_DEFINED, /* usExtIntrWireless */
++ BP_HW_DEFINED, /* usExtIntrAdslDyingGasp */
++ BP_NOT_DEFINED, /* usExtIntrHpna */
++ BP_NOT_DEFINED, /* usCsHpna */
++ BP_NOT_DEFINED, /* usAntInUseWireless */
++ BP_NOT_DEFINED, /* usGpioSesBtnWireless */
++ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */
++ BP_NOT_DEFINED /* usGpioLedSesWireless */
++};
++static PBOARD_PARAMETERS g_BoardParms[] =
++ {&g_bcm96338sv, &g_bcm96338l2m8m, 0};
++#endif
++
++#if defined(_BCM96345_) || defined(CONFIG_BCM96345)
++static BOARD_PARAMETERS g_bcm96345r =
++{
++ "96345R", /* szBoardId */
++ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */
++ 0x01, /* ucPhyAddress */
++ BP_NOT_DEFINED, /* usGpioPhySpiSck */
++ BP_NOT_DEFINED, /* usGpioPhySpiSs */
++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */
++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */
++ BP_NOT_DEFINED, /* usGpioPhyReset */
++ 0x01, /* numSwitchPorts */
++ BP_ENET_CONFIG_MDIO, /* usConfigType */
++ BP_NOT_DEFINED}, /* usReverseMii */
++ {BP_ENET_NO_PHY}}, /* ucPhyType */
++ {{BP_VOIP_NO_DSP}, /* ucDspType */
++ {BP_VOIP_NO_DSP}}, /* ucDspType */
++ BP_MEMORY_8MB_1_CHIP, /* usSdramSize */
++ BP_PSI_DEFAULT_SIZE, /* usPsiSize */
++ BP_GPIO_11_AH, /* usGpioRj11InnerPair */
++ BP_GPIO_12_AH, /* usGpioRj11OuterPair */
++ BP_GPIO_13_AH, /* usGpioPressAndHoldReset */
++ BP_NOT_DEFINED, /* usGpioPcmciaReset */
++ BP_NOT_DEFINED, /* usGpioUartRts */
++ BP_NOT_DEFINED, /* usGpioUartCts */
++ BP_GPIO_8_AH, /* usGpioLedAdsl */
++ BP_NOT_DEFINED, /* usGpioLedAdslFail */
++ BP_NOT_DEFINED, /* usGpioLedWireless */
++ BP_NOT_DEFINED, /* usGpioLedUsb */
++ BP_NOT_DEFINED, /* usGpioLedHpna */
++ BP_GPIO_8_AH, /* usGpioLedWanData */
++ BP_GPIO_9_AH, /* usGpioLedPpp */
++ BP_NOT_DEFINED, /* usGpioLedPppFail */
++ BP_NOT_DEFINED, /* usGpioLedBlPowerOn */
++ BP_GPIO_10_AH, /* usGpioLedBlAlarm */
++ BP_GPIO_9_AH, /* usGpioLedBlResetCfg */
++ BP_GPIO_8_AH, /* usGpioLedBlStop */
++ BP_NOT_DEFINED, /* usExtIntrWireless */
++ BP_EXT_INTR_0, /* usExtIntrAdslDyingGasp */
++ BP_NOT_DEFINED, /* usExtIntrHpna */
++ BP_NOT_DEFINED, /* usCsHpna */
++ BP_NOT_DEFINED, /* usAntInUseWireless */
++ BP_NOT_DEFINED, /* usGpioSesBtnWireless */
++ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */
++ BP_NOT_DEFINED /* usGpioLedSesWireless */
++};
++
++static BOARD_PARAMETERS g_bcm96345gw2 =
++{
++ /* A hardware jumper determines whether GPIO 13 is used for Press and Hold
++ * Reset or RTS.
++ */
++ "96345GW2", /* szBoardId */
++ {{BP_ENET_EXTERNAL_SWITCH, /* ucPhyType */
++ 0x00, /* ucPhyAddress */
++ BP_GPIO_0_AH, /* usGpioPhySpiSck */
++ BP_GPIO_4_AH, /* usGpioPhySpiSs */
++ BP_GPIO_12_AH, /* usGpioPhySpiMosi */
++ BP_GPIO_11_AH, /* usGpioPhySpiMiso */
++ BP_NOT_DEFINED, /* usGpioPhyReset */
++ 0x04, /* numSwitchPorts */
++ BP_ENET_CONFIG_GPIO, /* usConfigType */
++ BP_ENET_REVERSE_MII}, /* usReverseMii */
++ {BP_ENET_NO_PHY}}, /* ucPhyType */
++ {{BP_VOIP_DSP, /* ucDspType */
++ 0x00, /* ucDspAddress */
++ BP_EXT_INTR_1, /* usExtIntrVoip */
++ BP_GPIO_6_AH, /* usGpioVoipReset */
++ BP_GPIO_15_AH, /* usGpioVoipIntr */
++ BP_NOT_DEFINED, /* usGpioLedVoip */
++ BP_CS_2}, /* usCsVoip */
++ {BP_VOIP_NO_DSP}}, /* ucDspType */
++ BP_MEMORY_16MB_1_CHIP, /* usSdramSize */
++ BP_PSI_DEFAULT_SIZE, /* usPsiSize */
++ BP_NOT_DEFINED, /* usGpioRj11InnerPair */
++ BP_NOT_DEFINED, /* usGpioRj11OuterPair */
++ BP_GPIO_13_AH, /* usGpioPressAndHoldReset */
++ BP_GPIO_2_AH, /* usGpioPcmciaReset */
++ BP_GPIO_13_AH, /* usGpioUartRts */
++ BP_GPIO_9_AH, /* usGpioUartCts */
++ BP_GPIO_8_AH, /* usGpioLedAdsl */
++ BP_NOT_DEFINED, /* usGpioLedAdslFail */
++ BP_NOT_DEFINED, /* usGpioLedWireless */
++ BP_GPIO_7_AH, /* usGpioLedUsb */
++ BP_NOT_DEFINED, /* usGpioLedHpna */
++ BP_GPIO_8_AH, /* usGpioLedWanData */
++ BP_NOT_DEFINED, /* usGpioLedPpp */
++ BP_NOT_DEFINED, /* usGpioLedPppFail */
++ BP_NOT_DEFINED, /* usGpioLedBlPowerOn */
++ BP_GPIO_10_AH, /* usGpioLedBlAlarm */
++ BP_GPIO_7_AH, /* usGpioLedBlResetCfg */
++ BP_GPIO_8_AH, /* usGpioLedBlStop */
++ BP_EXT_INTR_2, /* usExtIntrWireless */
++ BP_EXT_INTR_0, /* usExtIntrAdslDyingGasp */
++ BP_NOT_DEFINED, /* usExtIntrHpna */
++ BP_NOT_DEFINED, /* usCsHpna */
++ BP_WLAN_ANT_MAIN, /* usAntInUseWireless */
++ BP_NOT_DEFINED, /* usGpioSesBtnWireless */
++ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */
++ BP_NOT_DEFINED /* usGpioLedSesWireless */
++};
++
++static BOARD_PARAMETERS g_bcm96345gw =
++{
++ "96345GW", /* szBoardId */
++ {{BP_ENET_EXTERNAL_SWITCH, /* ucPhyType */
++ 0x00, /* ucPhyAddress */
++ BP_NOT_DEFINED, /* usGpioPhySpiSck */
++ BP_NOT_DEFINED, /* usGpioPhySpiSs */
++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */
++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */
++ BP_NOT_DEFINED, /* usGpioPhyReset */
++ 0x04, /* numSwitchPorts */
++ BP_ENET_CONFIG_MDIO, /* usConfigType */
++ BP_ENET_NO_REVERSE_MII}, /* usReverseMii */
++ {BP_ENET_NO_PHY}}, /* ucPhyType */
++ {{BP_VOIP_DSP, /* ucDspType */
++ 0x00, /* ucDspAddress */
++ BP_EXT_INTR_1, /* usExtIntrVoip */
++ BP_GPIO_6_AH, /* usGpioVoipReset */
++ BP_GPIO_15_AH, /* usGpioVoipIntr */
++ BP_NOT_DEFINED, /* usGpioLedVoip */
++ BP_CS_2}, /* usCsVoip */
++ {BP_VOIP_NO_DSP}}, /* ucDspType */
++ BP_MEMORY_16MB_1_CHIP, /* usSdramSize */
++ BP_PSI_DEFAULT_SIZE, /* usPsiSize */
++ BP_GPIO_11_AH, /* usGpioRj11InnerPair */
++ BP_GPIO_1_AH, /* usGpioRj11OuterPair */
++ BP_GPIO_13_AH, /* usGpioPressAndHoldReset */
++ BP_GPIO_2_AH, /* usGpioPcmciaReset */
++ BP_NOT_DEFINED, /* usGpioUartRts */
++ BP_NOT_DEFINED, /* usGpioUartCts */
++ BP_GPIO_8_AH, /* usGpioLedAdsl */
++ BP_NOT_DEFINED, /* usGpioLedAdslFail */
++ BP_GPIO_10_AH, /* usGpioLedWireless */
++ BP_GPIO_7_AH, /* usGpioLedUsb */
++ BP_NOT_DEFINED, /* usGpioLedHpna */
++ BP_GPIO_8_AH, /* usGpioLedWanData */
++ BP_NOT_DEFINED, /* usGpioLedPpp */
++ BP_NOT_DEFINED, /* usGpioLedPppFail */
++ BP_NOT_DEFINED, /* usGpioLedBlPowerOn */
++ BP_GPIO_9_AH, /* usGpioLedBlAlarm */
++ BP_GPIO_10_AH, /* usGpioLedBlResetCfg */
++ BP_GPIO_8_AH, /* usGpioLedBlStop */
++ BP_EXT_INTR_2, /* usExtIntrWireless */
++ BP_EXT_INTR_0, /* usExtIntrAdslDyingGasp */
++ BP_EXT_INTR_3, /* usExtIntrHpna */
++ BP_CS_1, /* usCsHpna */
++ BP_WLAN_ANT_MAIN, /* usAntInUseWireless */
++ BP_NOT_DEFINED, /* usGpioSesBtnWireless */
++ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */
++ BP_NOT_DEFINED /* usGpioLedSesWireless */
++};
++
++static BOARD_PARAMETERS g_bcm96335r =
++{
++ "96335R", /* szBoardId */
++ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */
++ 0x01, /* ucPhyAddress */
++ BP_NOT_DEFINED, /* usGpioPhySpiSck */
++ BP_NOT_DEFINED, /* usGpioPhySpiSs */
++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */
++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */
++ BP_NOT_DEFINED, /* usGpioPhyReset */
++ 0x01, /* numSwitchPorts */
++ BP_ENET_CONFIG_MDIO, /* usConfigType */
++ BP_NOT_DEFINED}, /* usReverseMii */
++ {BP_ENET_NO_PHY}}, /* ucPhyType */
++ {{BP_VOIP_NO_DSP}, /* ucDspType */
++ {BP_VOIP_NO_DSP}}, /* ucDspType */
++ BP_MEMORY_8MB_1_CHIP, /* usSdramSize */
++ BP_PSI_DEFAULT_SIZE, /* usPsiSize */
++ BP_NOT_DEFINED, /* usGpioRj11InnerPair */
++ BP_NOT_DEFINED, /* usGpioRj11OuterPair */
++ BP_GPIO_14_AH, /* usGpioPressAndHoldReset */
++ BP_NOT_DEFINED, /* usGpioPcmciaReset */
++ BP_NOT_DEFINED, /* usGpioUartRts */
++ BP_NOT_DEFINED, /* usGpioUartCts */
++ BP_GPIO_9_AH, /* usGpioLedAdsl */
++ BP_NOT_DEFINED, /* usGpioLedAdslFail */
++ BP_NOT_DEFINED, /* usGpioLedWireless */
++ BP_NOT_DEFINED, /* usGpioLedUsb */
++ BP_NOT_DEFINED, /* usGpioLedHpna */
++ BP_GPIO_9_AH, /* usGpioLedWanData */
++ BP_GPIO_8_AH, /* usGpioLedPpp */
++ BP_NOT_DEFINED, /* usGpioLedPppFail */
++ BP_NOT_DEFINED, /* usGpioLedBlPowerOn */
++ BP_GPIO_10_AH, /* usGpioLedBlAlarm */
++ BP_GPIO_8_AH, /* usGpioLedBlResetCfg */
++ BP_GPIO_9_AH, /* usGpioLedBlStop */
++ BP_NOT_DEFINED, /* usExtIntrWireless */
++ BP_NOT_DEFINED, /* usExtIntrAdslDyingGasp */
++ BP_NOT_DEFINED, /* usExtIntrHpna */
++ BP_NOT_DEFINED, /* usCsHpna */
++ BP_NOT_DEFINED, /* usAntInUseWireless */
++ BP_NOT_DEFINED, /* usGpioSesBtnWireless */
++ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */
++ BP_NOT_DEFINED /* usGpioLedSesWireless */
++};
++
++static BOARD_PARAMETERS g_bcm96345r0 =
++{
++ "96345R0", /* szBoardId */
++ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */
++ 0x01, /* ucPhyAddress */
++ BP_NOT_DEFINED, /* usGpioPhySpiSck */
++ BP_NOT_DEFINED, /* usGpioPhySpiSs */
++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */
++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */
++ BP_NOT_DEFINED, /* usGpioPhyReset */
++ 0x01, /* numSwitchPorts */
++ BP_ENET_CONFIG_MDIO, /* usConfigType */
++ BP_NOT_DEFINED}, /* usReverseMii */
++ {BP_ENET_NO_PHY}}, /* ucPhyType */
++ {{BP_VOIP_NO_DSP}, /* ucDspType */
++ {BP_VOIP_NO_DSP}}, /* ucDspType */
++ BP_MEMORY_8MB_1_CHIP, /* usSdramSize */
++ BP_PSI_DEFAULT_SIZE, /* usPsiSize */
++ BP_NOT_DEFINED, /* usGpioRj11InnerPair */
++ BP_NOT_DEFINED, /* usGpioRj11OuterPair */
++ BP_NOT_DEFINED, /* usGpioPressAndHoldReset */
++ BP_NOT_DEFINED, /* usGpioPcmciaReset */
++ BP_NOT_DEFINED, /* usGpioUartRts */
++ BP_NOT_DEFINED, /* usGpioUartCts */
++ BP_GPIO_8_AH, /* usGpioLedAdsl */
++ BP_NOT_DEFINED, /* usGpioLedAdslFail */
++ BP_NOT_DEFINED, /* usGpioLedWireless */
++ BP_NOT_DEFINED, /* usGpioLedUsb */
++ BP_NOT_DEFINED, /* usGpioLedHpna */
++ BP_GPIO_9_AH, /* usGpioLedWanData */
++ BP_GPIO_9_AH, /* usGpioLedPpp */
++ BP_NOT_DEFINED, /* usGpioLedPppFail */
++ BP_NOT_DEFINED, /* usGpioLedBlPowerOn */
++ BP_GPIO_9_AH, /* usGpioLedBlAlarm */
++ BP_GPIO_8_AH, /* usGpioLedBlResetCfg */
++ BP_GPIO_8_AH, /* usGpioLedBlStop */
++ BP_NOT_DEFINED, /* usExtIntrWireless */
++ BP_NOT_DEFINED, /* usExtIntrAdslDyingGasp */
++ BP_NOT_DEFINED, /* usExtIntrHpna */
++ BP_NOT_DEFINED, /* usCsHpna */
++ BP_NOT_DEFINED, /* usAntInUseWireless */
++ BP_NOT_DEFINED, /* usGpioSesBtnWireless */
++ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */
++ BP_NOT_DEFINED /* usGpioLedSesWireless */
++};
++
++static BOARD_PARAMETERS g_bcm96345rs =
++{
++ "96345RS", /* szBoardId */
++ {{BP_ENET_EXTERNAL_SWITCH, /* ucPhyType */
++ 0x00, /* ucPhyAddress */
++ BP_NOT_DEFINED, /* usGpioPhySpiSck */
++ BP_NOT_DEFINED, /* usGpioPhySpiSs */
++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */
++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */
++ BP_NOT_DEFINED, /* usGpioPhyReset */
++ 0x01, /* numSwitchPorts */
++ BP_ENET_CONFIG_MDIO, /* usConfigType */
++ BP_ENET_NO_REVERSE_MII}, /* usReverseMii */
++ {BP_ENET_NO_PHY}}, /* ucPhyType */
++ {{BP_VOIP_NO_DSP}, /* ucDspType */
++ {BP_VOIP_NO_DSP}}, /* ucDspType */
++ BP_MEMORY_8MB_1_CHIP, /* usSdramSize */
++ BP_PSI_DEFAULT_SIZE, /* usPsiSize */
++ BP_GPIO_11_AH, /* usGpioRj11InnerPair */
++ BP_GPIO_12_AH, /* usGpioRj11OuterPair */
++ BP_GPIO_13_AH, /* usGpioPressAndHoldReset */
++ BP_NOT_DEFINED, /* usGpioPcmciaReset */
++ BP_NOT_DEFINED, /* usGpioUartRts */
++ BP_NOT_DEFINED, /* usGpioUartCts */
++ BP_GPIO_8_AH, /* usGpioLedAdsl */
++ BP_NOT_DEFINED, /* usGpioLedAdslFail */
++ BP_NOT_DEFINED, /* usGpioLedWireless */
++ BP_NOT_DEFINED, /* usGpioLedUsb */
++ BP_NOT_DEFINED, /* usGpioLedHpna */
++ BP_GPIO_8_AH, /* usGpioLedWanData */
++ BP_GPIO_9_AH, /* usGpioLedPpp */
++ BP_NOT_DEFINED, /* usGpioLedPppFail */
++ BP_NOT_DEFINED, /* usGpioLedBlPowerOn */
++ BP_GPIO_10_AH, /* usGpioLedBlAlarm */
++ BP_GPIO_9_AH, /* usGpioLedBlResetCfg */
++ BP_GPIO_8_AH, /* usGpioLedBlStop */
++ BP_NOT_DEFINED, /* usExtIntrWireless */
++ BP_EXT_INTR_0, /* usExtIntrAdslDyingGasp */
++ BP_NOT_DEFINED, /* usExtIntrHpna */
++ BP_NOT_DEFINED, /* usCsHpna */
++ BP_NOT_DEFINED, /* usAntInUseWireless */
++ BP_NOT_DEFINED, /* usGpioSesBtnWireless */
++ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */
++ BP_NOT_DEFINED /* usGpioLedSesWireless */
++};
++
++static PBOARD_PARAMETERS g_BoardParms[] =
++ {&g_bcm96345r, &g_bcm96345gw2, &g_bcm96345gw, &g_bcm96335r, &g_bcm96345r0,
++ &g_bcm96345rs, 0};
++#endif
++
++#if defined(_BCM96348_) || defined(CONFIG_BCM96348)
++
++static BOARD_PARAMETERS g_bcm96348r =
++{
++ "96348R", /* szBoardId */
++ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */
++ 0x01, /* ucPhyAddress */
++ BP_NOT_DEFINED, /* usGpioPhySpiSck */
++ BP_NOT_DEFINED, /* usGpioPhySpiSs */
++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */
++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */
++ BP_NOT_DEFINED, /* usGpioPhyReset */
++ 0x01, /* numSwitchPorts */
++ BP_ENET_CONFIG_MDIO, /* usConfigType */
++ BP_NOT_DEFINED}, /* usReverseMii */
++ {BP_ENET_NO_PHY}}, /* ucPhyType */
++ {{BP_VOIP_NO_DSP}, /* ucDspType */
++ {BP_VOIP_NO_DSP}}, /* ucDspType */
++ BP_MEMORY_8MB_1_CHIP, /* usSdramSize */
++ BP_PSI_DEFAULT_SIZE, /* usPsiSize */
++ BP_NOT_DEFINED, /* usGpioRj11InnerPair */
++ BP_NOT_DEFINED, /* usGpioRj11OuterPair */
++ BP_GPIO_7_AH, /* usGpioPressAndHoldReset */
++ BP_NOT_DEFINED, /* usGpioPcmciaReset */
++ BP_NOT_DEFINED, /* usGpioUartRts */
++ BP_NOT_DEFINED, /* usGpioUartCts */
++ BP_NOT_DEFINED, /* usGpioLedAdsl */
++ BP_GPIO_2_AL, /* usGpioLedAdslFail */
++ BP_NOT_DEFINED, /* usGpioLedWireless */
++ BP_NOT_DEFINED, /* usGpioLedUsb */
++ BP_NOT_DEFINED, /* usGpioLedHpna */
++ BP_GPIO_3_AL, /* usGpioLedWanData */
++ BP_GPIO_3_AL, /* usGpioLedPpp */
++ BP_GPIO_4_AL, /* usGpioLedPppFail */
++ BP_GPIO_0_AL, /* usGpioLedBlPowerOn */
++ BP_NOT_DEFINED, /* usGpioLedBlAlarm */
++ BP_GPIO_3_AL, /* usGpioLedBlResetCfg */
++ BP_GPIO_1_AL, /* usGpioLedBlStop */
++ BP_NOT_DEFINED, /* usExtIntrWireless */
++ BP_HW_DEFINED, /* usExtIntrAdslDyingGasp */
++ BP_NOT_DEFINED, /* usExtIntrHpna */
++ BP_NOT_DEFINED, /* usCsHpna */
++ BP_NOT_DEFINED, /* usAntInUseWireless */
++ BP_NOT_DEFINED, /* usGpioSesBtnWireless */
++ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */
++ BP_NOT_DEFINED /* usGpioLedSesWireless */
++};
++
++static BOARD_PARAMETERS g_bcm96348lv =
++{
++ "96348LV", /* szBoardId */
++ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */
++ 0x01, /* ucPhyAddress */
++ BP_NOT_DEFINED, /* usGpioPhySpiSck */
++ BP_NOT_DEFINED, /* usGpioPhySpiSs */
++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */
++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */
++ BP_NOT_DEFINED, /* usGpioPhyReset */
++ 0x01, /* numSwitchPorts */
++ BP_ENET_CONFIG_MDIO, /* usConfigType */
++ BP_NOT_DEFINED}, /* usReverseMii */
++ {BP_ENET_EXTERNAL_PHY, /* ucPhyType */
++ 0x02, /* ucPhyAddress */
++ BP_NOT_DEFINED, /* usGpioPhySpiSck */
++ BP_NOT_DEFINED, /* usGpioPhySpiSs */
++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */
++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */
++ BP_GPIO_5_AL, /* usGpioPhyReset */
++ 0x01, /* numSwitchPorts */
++ BP_ENET_CONFIG_MDIO, /* usConfigType */
++ BP_NOT_DEFINED}}, /* usReverseMii */
++ {{BP_VOIP_NO_DSP}, /* ucDspType */
++ {BP_VOIP_NO_DSP}}, /* ucDspType */
++ BP_MEMORY_16MB_2_CHIP, /* usSdramSize */
++ BP_PSI_DEFAULT_SIZE, /* usPsiSize */
++ BP_NOT_DEFINED, /* usGpioRj11InnerPair */
++ BP_NOT_DEFINED, /* usGpioRj11OuterPair */
++ BP_GPIO_7_AH, /* usGpioPressAndHoldReset */
++ BP_NOT_DEFINED, /* usGpioPcmciaReset */
++ BP_NOT_DEFINED, /* usGpioUartRts */
++ BP_NOT_DEFINED, /* usGpioUartCts */
++ BP_NOT_DEFINED, /* usGpioLedAdsl */
++ BP_GPIO_2_AL, /* usGpioLedAdslFail */
++ BP_NOT_DEFINED, /* usGpioLedWireless */
++ BP_NOT_DEFINED, /* usGpioLedUsb */
++ BP_NOT_DEFINED, /* usGpioLedHpna */
++ BP_GPIO_3_AL, /* usGpioLedWanData */
++ BP_GPIO_3_AL, /* usGpioLedPpp */
++ BP_GPIO_4_AL, /* usGpioLedPppFail */
++ BP_GPIO_0_AL, /* usGpioLedBlPowerOn */
++ BP_NOT_DEFINED, /* usGpioLedBlAlarm */
++ BP_GPIO_3_AL, /* usGpioLedBlResetCfg */
++ BP_GPIO_1_AL, /* usGpioLedBlStop */
++ BP_NOT_DEFINED, /* usExtIntrWireless */
++ BP_NOT_DEFINED, /* usExtIntrAdslDyingGasp */
++ BP_NOT_DEFINED, /* usExtIntrHpna */
++ BP_NOT_DEFINED, /* usCsHpna */
++ BP_NOT_DEFINED, /* usAntInUseWireless */
++ BP_NOT_DEFINED, /* usGpioSesBtnWireless */
++ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */
++ BP_NOT_DEFINED /* usGpioLedSesWireless */
++};
++
++static BOARD_PARAMETERS g_bcm96348gw =
++{
++ "96348GW", /* szBoardId */
++ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */
++ 0x01, /* ucPhyAddress */
++ BP_NOT_DEFINED, /* usGpioPhySpiSck */
++ BP_NOT_DEFINED, /* usGpioPhySpiSs */
++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */
++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */
++ BP_NOT_DEFINED, /* usGpioPhyReset */
++ 0x01, /* numSwitchPorts */
++ BP_ENET_CONFIG_MDIO, /* usConfigType */
++ BP_NOT_DEFINED}, /* usReverseMii */
++ {BP_ENET_EXTERNAL_SWITCH, /* ucPhyType */
++ 0x00, /* ucPhyAddress */
++ BP_NOT_DEFINED, /* usGpioPhySpiSck */
++ BP_NOT_DEFINED, /* usGpioPhySpiSs */
++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */
++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */
++ BP_NOT_DEFINED, /* usGpioPhyReset */
++ 0x03, /* numSwitchPorts */
++ BP_ENET_CONFIG_SPI_SSB_0, /* usConfigType */
++ BP_ENET_REVERSE_MII}}, /* usReverseMii */
++ {{BP_VOIP_DSP, /* ucDspType */
++ 0x00, /* ucDspAddress */
++ BP_EXT_INTR_2, /* usExtIntrVoip */
++ BP_GPIO_6_AH, /* usGpioVoipReset */
++ BP_GPIO_34_AH, /* usGpioVoipIntr */
++ BP_NOT_DEFINED, /* usGpioLedVoip */
++ BP_CS_2}, /* usCsVoip */
++ {BP_VOIP_NO_DSP}}, /* ucDspType */
++ BP_MEMORY_16MB_2_CHIP, /* usSdramSize */
++ BP_PSI_DEFAULT_SIZE, /* usPsiSize */
++ BP_NOT_DEFINED, /* usGpioRj11InnerPair */
++ BP_NOT_DEFINED, /* usGpioRj11OuterPair */
++ BP_GPIO_33_AL, /* usGpioPressAndHoldReset */
++ BP_NOT_DEFINED, /* usGpioPcmciaReset */
++ BP_NOT_DEFINED, /* usGpioUartRts */
++ BP_NOT_DEFINED, /* usGpioUartCts */
++ BP_NOT_DEFINED, /* usGpioLedAdsl */
++ BP_GPIO_2_AL, /* usGpioLedAdslFail */
++ BP_NOT_DEFINED, /* usGpioLedWireless */
++ BP_NOT_DEFINED, /* usGpioLedUsb */
++ BP_NOT_DEFINED, /* usGpioLedHpna */
++ BP_GPIO_3_AL, /* usGpioLedWanData */
++ BP_GPIO_3_AL, /* usGpioLedPpp */
++ BP_GPIO_4_AL, /* usGpioLedPppFail */
++ BP_GPIO_0_AL, /* usGpioLedBlPowerOn */
++ BP_NOT_DEFINED, /* usGpioLedBlAlarm */
++ BP_GPIO_3_AL, /* usGpioLedBlResetCfg */
++ BP_GPIO_1_AL, /* usGpioLedBlStop */
++ BP_NOT_DEFINED, /* usExtIntrWireless */
++ BP_HW_DEFINED, /* usExtIntrAdslDyingGasp */
++ BP_NOT_DEFINED, /* usExtIntrHpna */
++ BP_NOT_DEFINED, /* usCsHpna */
++ BP_WLAN_ANT_MAIN, /* usAntInUseWireless */
++ BP_NOT_DEFINED, /* BP_GPIO_35_AH, */ /* usGpioSesBtnWireless */
++ BP_NOT_DEFINED, /* BP_EXT_INTR_3, */ /* usExtIntrSesBtnWireless */
++ BP_NOT_DEFINED /* BP_GPIO_0_AL */ /* usGpioLedSesWireless */
++};
++
++
++static BOARD_PARAMETERS g_bcm96348gw_10 =
++{
++ "96348GW-10", /* szBoardId */
++ {{BP_ENET_NO_PHY}, /* ucPhyType */
++ {BP_ENET_EXTERNAL_SWITCH, /* ucPhyType */
++ 0x00, /* ucPhyAddress */
++ BP_NOT_DEFINED, /* usGpioPhySpiSck */
++ BP_NOT_DEFINED, /* usGpioPhySpiSs */
++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */
++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */
++ BP_NOT_DEFINED, /* usGpioPhyReset */
++ 0x04, /* numSwitchPorts */
++ BP_ENET_CONFIG_SPI_SSB_1, /* usConfigType */
++ BP_ENET_REVERSE_MII}}, /* usReverseMii */
++ {{BP_VOIP_DSP, /* ucDspType */
++ 0x00, /* ucDspAddress */
++ BP_EXT_INTR_2, /* usExtIntrVoip */
++ BP_GPIO_6_AH, /* usGpioVoipReset */
++ BP_GPIO_34_AH, /* usGpioVoipIntr */
++ BP_NOT_DEFINED, /* usGpioLedVoip */
++ BP_CS_2}, /* usCsVoip */
++ {BP_VOIP_NO_DSP}}, /* ucDspType */
++ BP_MEMORY_16MB_2_CHIP, /* usSdramSize */
++ BP_PSI_DEFAULT_SIZE, /* usPsiSize */
++ BP_NOT_DEFINED, /* usGpioRj11InnerPair */
++ BP_NOT_DEFINED, /* usGpioRj11OuterPair */
++ BP_GPIO_33_AL, /* usGpioPressAndHoldReset */
++ BP_NOT_DEFINED, /* usGpioPcmciaReset */
++ BP_NOT_DEFINED, /* usGpioUartRts */
++ BP_NOT_DEFINED, /* usGpioUartCts */
++ BP_NOT_DEFINED, /* usGpioLedAdsl */
++ BP_GPIO_2_AL, /* usGpioLedAdslFail */
++ BP_NOT_DEFINED, /* usGpioLedWireless */
++ BP_NOT_DEFINED, /* usGpioLedUsb */
++ BP_NOT_DEFINED, /* usGpioLedHpna */
++ BP_GPIO_3_AL, /* usGpioLedWanData */
++ BP_GPIO_3_AL, /* usGpioLedPpp */
++ BP_GPIO_4_AL, /* usGpioLedPppFail */
++ BP_GPIO_0_AL, /* usGpioLedBlPowerOn */
++ BP_NOT_DEFINED, /* usGpioLedBlAlarm */
++ BP_GPIO_3_AL, /* usGpioLedBlResetCfg */
++ BP_GPIO_1_AL, /* usGpioLedBlStop */
++ BP_NOT_DEFINED, /* usExtIntrWireless */
++ BP_HW_DEFINED, /* usExtIntrAdslDyingGasp */
++ BP_NOT_DEFINED, /* usExtIntrHpna */
++ BP_NOT_DEFINED, /* usCsHpna */
++ BP_WLAN_ANT_MAIN, /* usAntInUseWireless */
++ BP_NOT_DEFINED, /* usGpioSesBtnWireless */
++ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */
++ BP_NOT_DEFINED /* usGpioLedSesWireless */
++};
++
++static BOARD_PARAMETERS g_bcm96348gw_11 =
++{
++ "96348GW-11", /* szBoardId */
++ {{BP_ENET_NO_PHY}, /* ucPhyType */
++ {BP_ENET_EXTERNAL_SWITCH, /* ucPhyType */
++ 0x00, /* ucPhyAddress */
++ BP_NOT_DEFINED, /* usGpioPhySpiSck */
++ BP_NOT_DEFINED, /* usGpioPhySpiSs */
++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */
++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */
++ BP_NOT_DEFINED, /* usGpioPhyReset */
++ 0x04, /* numSwitchPorts */
++ BP_ENET_CONFIG_SPI_SSB_1, /* usConfigType */
++ BP_ENET_REVERSE_MII}}, /* usReverseMii */
++ {{BP_VOIP_NO_DSP}, /* ucDspType */
++ {BP_VOIP_NO_DSP}}, /* ucDspType */
++ BP_MEMORY_16MB_2_CHIP, /* usSdramSize */
++ BP_PSI_DEFAULT_SIZE, /* usPsiSize */
++ BP_NOT_DEFINED, /* usGpioRj11InnerPair */
++ BP_NOT_DEFINED, /* usGpioRj11OuterPair */
++ BP_GPIO_33_AL, /* usGpioPressAndHoldReset */
++ BP_NOT_DEFINED, /* usGpioPcmciaReset */
++ BP_NOT_DEFINED, /* usGpioUartRts */
++ BP_NOT_DEFINED, /* usGpioUartCts */
++ BP_NOT_DEFINED, /* usGpioLedAdsl */
++ BP_GPIO_2_AL, /* usGpioLedAdslFail */
++ BP_NOT_DEFINED, /* usGpioLedWireless */
++ BP_NOT_DEFINED, /* usGpioLedUsb */
++ BP_NOT_DEFINED, /* usGpioLedHpna */
++ BP_GPIO_3_AL, /* usGpioLedWanData */
++ BP_GPIO_3_AL, /* usGpioLedPpp */
++ BP_GPIO_4_AL, /* usGpioLedPppFail */
++ BP_GPIO_0_AL, /* usGpioLedBlPowerOn */
++ BP_NOT_DEFINED, /* usGpioLedBlAlarm */
++ BP_GPIO_3_AL, /* usGpioLedBlResetCfg */
++ BP_GPIO_1_AL, /* usGpioLedBlStop */
++ BP_NOT_DEFINED, /* usExtIntrWireless */
++ BP_HW_DEFINED, /* usExtIntrAdslDyingGasp */
++ BP_NOT_DEFINED, /* usExtIntrHpna */
++ BP_NOT_DEFINED, /* usCsHpna */
++ BP_NOT_DEFINED, /* usAntInUseWireless */
++ BP_NOT_DEFINED, /* usGpioSesBtnWireless */
++ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */
++ BP_NOT_DEFINED /* usGpioLedSesWireless */
++};
++
++static BOARD_PARAMETERS g_bcm96348sv =
++{
++ "96348SV", /* szBoardId */
++ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */
++ 0x01, /* ucPhyAddress */
++ BP_NOT_DEFINED, /* usGpioPhySpiSck */
++ BP_NOT_DEFINED, /* usGpioPhySpiSs */
++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */
++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */
++ BP_NOT_DEFINED, /* usGpioPhyReset */
++ 0x01, /* numSwitchPorts */
++ BP_ENET_CONFIG_MDIO, /* usConfigType */
++ BP_NOT_DEFINED}, /* usReverseMii */
++ {BP_ENET_EXTERNAL_PHY, /* ucPhyType */
++ 0x1f, /* ucPhyAddress */
++ BP_NOT_DEFINED, /* usGpioPhySpiSck */
++ BP_NOT_DEFINED, /* usGpioPhySpiSs */
++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */
++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */
++ BP_NOT_DEFINED, /* usGpioPhyReset */
++ 0x01, /* numSwitchPorts */
++ BP_ENET_CONFIG_MDIO, /* usConfigType */
++ BP_NOT_DEFINED}}, /* usReverseMii */
++ {{BP_VOIP_NO_DSP}, /* ucDspType */
++ {BP_VOIP_NO_DSP}}, /* ucDspType */
++ BP_MEMORY_32MB_2_CHIP, /* usSdramSize */
++ BP_PSI_DEFAULT_SIZE, /* usPsiSize */
++ BP_NOT_DEFINED, /* usGpioRj11InnerPair */
++ BP_NOT_DEFINED, /* usGpioRj11OuterPair */
++ BP_NOT_DEFINED, /* usGpioPressAndHoldReset */
++ BP_NOT_DEFINED, /* usGpioPcmciaReset */
++ BP_NOT_DEFINED, /* usGpioUartRts */
++ BP_NOT_DEFINED, /* usGpioUartCts */
++ BP_NOT_DEFINED, /* usGpioLedAdsl */
++ BP_NOT_DEFINED, /* usGpioLedAdslFail */
++ BP_NOT_DEFINED, /* usGpioLedWireless */
++ BP_NOT_DEFINED, /* usGpioLedUsb */
++ BP_NOT_DEFINED, /* usGpioLedHpna */
++ BP_NOT_DEFINED, /* usGpioLedWanData */
++ BP_NOT_DEFINED, /* usGpioLedPpp */
++ BP_NOT_DEFINED, /* usGpioLedPppFail */
++ BP_NOT_DEFINED, /* usGpioLedBlPowerOn */
++ BP_NOT_DEFINED, /* usGpioLedBlAlarm */
++ BP_NOT_DEFINED, /* usGpioLedBlResetCfg */
++ BP_NOT_DEFINED, /* usGpioLedBlStop */
++ BP_NOT_DEFINED, /* usExtIntrWireless */
++ BP_HW_DEFINED, /* usExtIntrAdslDyingGasp */
++ BP_NOT_DEFINED, /* usExtIntrHpna */
++ BP_NOT_DEFINED, /* usCsHpna */
++ BP_NOT_DEFINED, /* usAntInUseWireless */
++ BP_NOT_DEFINED, /* usGpioSesBtnWireless */
++ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */
++ BP_NOT_DEFINED /* usGpioLedSesWireless */
++};
++
++
++static BOARD_PARAMETERS g_bcm96348gw_dualDsp =
++{
++ "96348GW-DualDSP", /* szBoardId */
++ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */
++ 0x01, /* ucPhyAddress */
++ BP_NOT_DEFINED, /* usGpioPhySpiSck */
++ BP_NOT_DEFINED, /* usGpioPhySpiSs */
++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */
++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */
++ BP_NOT_DEFINED, /* usGpioPhyReset */
++ 0x01, /* numSwitchPorts */
++ BP_ENET_CONFIG_MDIO, /* usConfigType */
++ BP_NOT_DEFINED}, /* usReverseMii */
++ {BP_ENET_EXTERNAL_SWITCH, /* ucPhyType */
++ 0x00, /* ucPhyAddress */
++ BP_NOT_DEFINED, /* usGpioPhySpiSck */
++ BP_NOT_DEFINED, /* usGpioPhySpiSs */
++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */
++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */
++ BP_NOT_DEFINED, /* usGpioPhyReset */
++ 0x03, /* numSwitchPorts */
++ BP_ENET_CONFIG_SPI_SSB_1, /* usConfigType */
++ BP_ENET_REVERSE_MII}}, /* usReverseMii */
++ {{BP_VOIP_DSP, /* ucDspType */
++ 0x00, /* ucDspAddress */
++ BP_EXT_INTR_2, /* usExtIntrVoip */
++ BP_UNEQUIPPED, /* usGpioVoipReset */
++ BP_GPIO_34_AH, /* usGpioVoipIntr */
++ BP_NOT_DEFINED, /* usGpioLedVoip */
++ BP_CS_2}, /* usCsVoip */
++ {BP_VOIP_DSP, /* ucDspType */
++ 0x01, /* ucDspAddress */
++ BP_EXT_INTR_3, /* usExtIntrVoip */
++ BP_UNEQUIPPED , /* usGpioVoipReset */
++ BP_GPIO_35_AH, /* usGpioVoipIntr */
++ BP_NOT_DEFINED, /* usGpioLedVoip */
++ BP_CS_3}}, /* usCsVoip */
++ BP_MEMORY_16MB_2_CHIP, /* usSdramSize */
++ BP_PSI_DEFAULT_SIZE, /* usPsiSize */
++ BP_NOT_DEFINED, /* usGpioRj11InnerPair */
++ BP_NOT_DEFINED, /* usGpioRj11OuterPair */
++ BP_GPIO_33_AL, /* usGpioPressAndHoldReset */
++ BP_NOT_DEFINED, /* usGpioPcmciaReset */
++ BP_NOT_DEFINED, /* usGpioUartRts */
++ BP_NOT_DEFINED, /* usGpioUartCts */
++ BP_NOT_DEFINED, /* usGpioLedAdsl */
++ BP_GPIO_2_AL, /* usGpioLedAdslFail */
++ BP_NOT_DEFINED, /* usGpioLedWireless */
++ BP_NOT_DEFINED, /* usGpioLedUsb */
++ BP_NOT_DEFINED, /* usGpioLedHpna */
++ BP_GPIO_3_AL, /* usGpioLedWanData */
++ BP_GPIO_3_AL, /* usGpioLedPpp */
++ BP_GPIO_4_AL, /* usGpioLedPppFail */
++ BP_GPIO_0_AL, /* usGpioLedBlPowerOn */
++ BP_NOT_DEFINED, /* usGpioLedBlAlarm */
++ BP_GPIO_3_AL, /* usGpioLedBlResetCfg */
++ BP_GPIO_1_AL, /* usGpioLedBlStop */
++ BP_NOT_DEFINED, /* usExtIntrWireless */
++ BP_HW_DEFINED, /* usExtIntrAdslDyingGasp */
++ BP_NOT_DEFINED, /* usExtIntrHpna */
++ BP_NOT_DEFINED, /* usCsHpna */
++ BP_WLAN_ANT_MAIN, /* usAntInUseWireless */
++ BP_NOT_DEFINED, /* usGpioSesBtnWireless */
++ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */
++ BP_NOT_DEFINED /* usGpioLedSesWireless */
++};
++
++
++static BOARD_PARAMETERS g_bcmCustom_01 =
++{
++ "BCMCUST_01", /* szBoardId */
++ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */
++ 0x01, /* ucPhyAddress */
++ BP_NOT_DEFINED, /* usGpioPhySpiSck */
++ BP_NOT_DEFINED, /* usGpioPhySpiSs */
++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */
++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */
++ BP_NOT_DEFINED, /* usGpioPhyReset */
++ 0x01, /* numSwitchPorts */
++ BP_ENET_CONFIG_MDIO, /* usConfigType */
++ BP_NOT_DEFINED}, /* usReverseMii */
++ {BP_ENET_NO_PHY, /* ucPhyType */
++ 0x00, /* ucPhyAddress */
++ BP_NOT_DEFINED, /* usGpioPhySpiSck */
++ BP_NOT_DEFINED, /* usGpioPhySpiSs */
++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */
++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */
++ BP_NOT_DEFINED, /* usGpioPhyReset */
++ 0x01, /* numSwitchPorts */
++ BP_ENET_CONFIG_SPI_SSB_1, /* usConfigType */
++ BP_ENET_REVERSE_MII}}, /* usReverseMii */
++ {{BP_VOIP_DSP, /* ucDspType */
++ 0x00, /* ucDspAddress */
++ BP_EXT_INTR_2, /* usExtIntrVoip */
++ BP_GPIO_36_AH, /* usGpioVoipReset */
++ BP_GPIO_34_AL, /* usGpioVoipIntr */
++ BP_NOT_DEFINED, /* usGpioLedVoip */
++ BP_CS_2}, /* usCsVoip */
++ {BP_VOIP_NO_DSP}}, /* ucDspType */
++ BP_MEMORY_16MB_2_CHIP, /* usSdramSize */
++ BP_PSI_DEFAULT_SIZE, /* usPsiSize */
++ BP_NOT_DEFINED, /* usGpioRj11InnerPair */
++ BP_NOT_DEFINED, /* usGpioRj11OuterPair */
++ BP_GPIO_33_AL, /* usGpioPressAndHoldReset */
++ BP_NOT_DEFINED, /* usGpioPcmciaReset */
++ BP_NOT_DEFINED, /* usGpioUartRts */
++ BP_NOT_DEFINED, /* usGpioUartCts */
++ BP_NOT_DEFINED, /* usGpioLedAdsl */
++ BP_GPIO_2_AL, /* usGpioLedAdslFail */
++ BP_NOT_DEFINED, /* usGpioLedWireless */
++ BP_NOT_DEFINED, /* usGpioLedUsb */
++ BP_NOT_DEFINED, /* usGpioLedHpna */
++ BP_GPIO_3_AL, /* usGpioLedWanData */
++ BP_GPIO_3_AL, /* usGpioLedPpp */
++ BP_GPIO_4_AL, /* usGpioLedPppFail */
++ BP_GPIO_0_AL, /* usGpioLedBlPowerOn */
++ BP_NOT_DEFINED, /* usGpioLedBlAlarm */
++ BP_GPIO_3_AL, /* usGpioLedBlResetCfg */
++ BP_GPIO_1_AL, /* usGpioLedBlStop */
++ BP_NOT_DEFINED, /* usExtIntrWireless */
++ BP_NOT_DEFINED, /* usExtIntrAdslDyingGasp */
++ BP_NOT_DEFINED, /* usExtIntrHpna */
++ BP_NOT_DEFINED, /* usCsHpna */
++ BP_NOT_DEFINED, /* usAntInUseWireless */
++ BP_NOT_DEFINED, /* usGpioSesBtnWireless */
++ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */
++ BP_NOT_DEFINED /* usGpioLedSesWireless */
++};
++
++static PBOARD_PARAMETERS g_BoardParms[] =
++ {&g_bcm96348r, &g_bcm96348lv, &g_bcm96348gw, &g_bcm96348gw_10,
++ &g_bcm96348gw_11, &g_bcm96348sv, &g_bcm96348gw_dualDsp,
++ &g_bcmCustom_01, 0};
++#endif
++
++static PBOARD_PARAMETERS g_pCurrentBp = 0;
++
++/**************************************************************************
++ * Name : bpstrcmp
++ *
++ * Description: String compare for this file so it does not depend on an OS.
++ * (Linux kernel and CFE share this source file.)
++ *
++ * Parameters : [IN] dest - destination string
++ * [IN] src - source string
++ *
++ * Returns : -1 - dest < src, 1 - dest > src, 0 dest == src
++ ***************************************************************************/
++static int bpstrcmp(const char *dest,const char *src);
++static int bpstrcmp(const char *dest,const char *src)
++{
++ while (*src && *dest)
++ {
++ if (*dest < *src) return -1;
++ if (*dest > *src) return 1;
++ dest++;
++ src++;
++ }
++
++ if (*dest && !*src) return 1;
++ if (!*dest && *src) return -1;
++ return 0;
++} /* bpstrcmp */
++
++/**************************************************************************
++ * Name : BpGetVoipDspConfig
++ *
++ * Description: Gets the DSP configuration from the board parameter
++ * structure for a given DSP index.
++ *
++ * Parameters : [IN] dspNum - DSP index (number)
++ *
++ * Returns : Pointer to DSP configuration block if found/valid, NULL
++ * otherwise.
++ ***************************************************************************/
++VOIP_DSP_INFO *BpGetVoipDspConfig( unsigned char dspNum );
++VOIP_DSP_INFO *BpGetVoipDspConfig( unsigned char dspNum )
++{
++ VOIP_DSP_INFO *pDspConfig = 0;
++ int i;
++
++ if( g_pCurrentBp )
++ {
++ for( i = 0 ; i < BP_MAX_VOIP_DSP ; i++ )
++ {
++ if( g_pCurrentBp->VoIPDspInfo[i].ucDspType != BP_VOIP_NO_DSP &&
++ g_pCurrentBp->VoIPDspInfo[i].ucDspAddress == dspNum )
++ {
++ pDspConfig = &g_pCurrentBp->VoIPDspInfo[i];
++ break;
++ }
++ }
++ }
++
++ return pDspConfig;
++}
++
++
++/**************************************************************************
++ * Name : BpSetBoardId
++ *
++ * Description: This function find the BOARD_PARAMETERS structure for the
++ * specified board id string and assigns it to a global, static
++ * variable.
++ *
++ * Parameters : [IN] pszBoardId - Board id string that is saved into NVRAM.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_FOUND - Error, board id input string does not
++ * have a board parameters configuration record.
++ ***************************************************************************/
++int BpSetBoardId( char *pszBoardId )
++{
++ int nRet = BP_BOARD_ID_NOT_FOUND;
++ PBOARD_PARAMETERS *ppBp;
++
++ for( ppBp = g_BoardParms; *ppBp; ppBp++ )
++ {
++ if( !bpstrcmp((*ppBp)->szBoardId, pszBoardId) )
++ {
++ g_pCurrentBp = *ppBp;
++ nRet = BP_SUCCESS;
++ break;
++ }
++ }
++
++ return( nRet );
++} /* BpSetBoardId */
++
++/**************************************************************************
++ * Name : BpGetBoardIds
++ *
++ * Description: This function returns all of the supported board id strings.
++ *
++ * Parameters : [OUT] pszBoardIds - Address of a buffer that the board id
++ * strings are returned in. Each id starts at BP_BOARD_ID_LEN
++ * boundary.
++ * [IN] nBoardIdsSize - Number of BP_BOARD_ID_LEN elements that
++ * were allocated in pszBoardIds.
++ *
++ * Returns : Number of board id strings returned.
++ ***************************************************************************/
++int BpGetBoardIds( char *pszBoardIds, int nBoardIdsSize )
++{
++ PBOARD_PARAMETERS *ppBp;
++ int i;
++ char *src;
++ char *dest;
++
++ for( i = 0, ppBp = g_BoardParms; *ppBp && nBoardIdsSize;
++ i++, ppBp++, nBoardIdsSize--, pszBoardIds += BP_BOARD_ID_LEN )
++ {
++ dest = pszBoardIds;
++ src = (*ppBp)->szBoardId;
++ while( *src )
++ *dest++ = *src++;
++ *dest = '\0';
++ }
++
++ return( i );
++} /* BpGetBoardIds */
++
++/**************************************************************************
++ * Name : BpGetEthernetMacInfo
++ *
++ * Description: This function returns all of the supported board id strings.
++ *
++ * Parameters : [OUT] pEnetInfos - Address of an array of ETHERNET_MAC_INFO
++ * buffers.
++ * [IN] nNumEnetInfos - Number of ETHERNET_MAC_INFO elements that
++ * are pointed to by pEnetInfos.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ ***************************************************************************/
++int BpGetEthernetMacInfo( PETHERNET_MAC_INFO pEnetInfos, int nNumEnetInfos )
++{
++ int i, nRet;
++
++ if( g_pCurrentBp )
++ {
++ for( i = 0; i < nNumEnetInfos; i++, pEnetInfos++ )
++ {
++ if( i < BP_MAX_ENET_MACS )
++ {
++ unsigned char *src = (unsigned char *)
++ &g_pCurrentBp->EnetMacInfos[i];
++ unsigned char *dest = (unsigned char *) pEnetInfos;
++ int len = sizeof(ETHERNET_MAC_INFO);
++ while( len-- )
++ *dest++ = *src++;
++ }
++ else
++ pEnetInfos->ucPhyType = BP_ENET_NO_PHY;
++ }
++
++ nRet = BP_SUCCESS;
++ }
++ else
++ {
++ for( i = 0; i < nNumEnetInfos; i++, pEnetInfos++ )
++ pEnetInfos->ucPhyType = BP_ENET_NO_PHY;
++
++ nRet = BP_BOARD_ID_NOT_SET;
++ }
++
++ return( nRet );
++} /* BpGetEthernetMacInfo */
++
++/**************************************************************************
++ * Name : BpGetSdramSize
++ *
++ * Description: This function returns a constant that describees the board's
++ * SDRAM type and size.
++ *
++ * Parameters : [OUT] pulSdramSize - Address of short word that the SDRAM size
++ * is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ ***************************************************************************/
++int BpGetSdramSize( unsigned long *pulSdramSize )
++{
++ int nRet;
++
++ if( g_pCurrentBp )
++ {
++ *pulSdramSize = g_pCurrentBp->usSdramSize;
++ nRet = BP_SUCCESS;
++ }
++ else
++ {
++ *pulSdramSize = BP_NOT_DEFINED;
++ nRet = BP_BOARD_ID_NOT_SET;
++ }
++
++ return( nRet );
++} /* BpGetSdramSize */
++
++/**************************************************************************
++ * Name : BpGetPsiSize
++ *
++ * Description: This function returns the persistent storage size in K bytes.
++ *
++ * Parameters : [OUT] pulPsiSize - Address of short word that the persistent
++ * storage size is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ ***************************************************************************/
++int BpGetPsiSize( unsigned long *pulPsiSize )
++{
++ int nRet;
++
++ if( g_pCurrentBp )
++ {
++ *pulPsiSize = g_pCurrentBp->usPsiSize;
++ nRet = BP_SUCCESS;
++ }
++ else
++ {
++ *pulPsiSize = BP_NOT_DEFINED;
++ nRet = BP_BOARD_ID_NOT_SET;
++ }
++
++ return( nRet );
++} /* BpGetPsiSize */
++
++/**************************************************************************
++ * Name : BpGetRj11InnerOuterPairGpios
++ *
++ * Description: This function returns the GPIO pin assignments for changing
++ * between the RJ11 inner pair and RJ11 outer pair.
++ *
++ * Parameters : [OUT] pusInner - Address of short word that the RJ11 inner pair
++ * GPIO pin is returned in.
++ * [OUT] pusOuter - Address of short word that the RJ11 outer pair
++ * GPIO pin is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, values are returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetRj11InnerOuterPairGpios( unsigned short *pusInner,
++ unsigned short *pusOuter )
++{
++ int nRet;
++
++ if( g_pCurrentBp )
++ {
++ *pusInner = g_pCurrentBp->usGpioRj11InnerPair;
++ *pusOuter = g_pCurrentBp->usGpioRj11OuterPair;
++
++ if( g_pCurrentBp->usGpioRj11InnerPair != BP_NOT_DEFINED &&
++ g_pCurrentBp->usGpioRj11OuterPair != BP_NOT_DEFINED )
++ {
++ nRet = BP_SUCCESS;
++ }
++ else
++ {
++ nRet = BP_VALUE_NOT_DEFINED;
++ }
++ }
++ else
++ {
++ *pusInner = *pusOuter = BP_NOT_DEFINED;
++ nRet = BP_BOARD_ID_NOT_SET;
++ }
++
++ return( nRet );
++} /* BpGetRj11InnerOuterPairGpios */
++
++/**************************************************************************
++ * Name : BpGetPressAndHoldResetGpio
++ *
++ * Description: This function returns the GPIO pin assignment for the press
++ * and hold reset button.
++ *
++ * Parameters : [OUT] pusValue - Address of short word that the press and hold
++ * reset button GPIO pin is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetPressAndHoldResetGpio( unsigned short *pusValue )
++{
++ int nRet;
++
++ if( g_pCurrentBp )
++ {
++ *pusValue = g_pCurrentBp->usGpioPressAndHoldReset;
++
++ if( g_pCurrentBp->usGpioPressAndHoldReset != BP_NOT_DEFINED )
++ {
++ nRet = BP_SUCCESS;
++ }
++ else
++ {
++ nRet = BP_VALUE_NOT_DEFINED;
++ }
++ }
++ else
++ {
++ *pusValue = BP_NOT_DEFINED;
++ nRet = BP_BOARD_ID_NOT_SET;
++ }
++
++ return( nRet );
++} /* BpGetPressAndHoldResetGpio */
++
++/**************************************************************************
++ * Name : BpGetVoipResetGpio
++ *
++ * Description: This function returns the GPIO pin assignment for the VOIP
++ * Reset operation.
++ *
++ * Parameters : [OUT] pusValue - Address of short word that the VOIP reset
++ * GPIO pin is returned in.
++ * [IN] dspNum - Address of the DSP to query.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetVoipResetGpio( unsigned char dspNum, unsigned short *pusValue )
++{
++ int nRet;
++
++ if( g_pCurrentBp )
++ {
++ VOIP_DSP_INFO *pDspInfo = BpGetVoipDspConfig( dspNum );
++
++ if( pDspInfo )
++ {
++ *pusValue = pDspInfo->usGpioVoipReset;
++
++ if( *pusValue != BP_NOT_DEFINED ||
++ *pusValue == BP_UNEQUIPPED )
++ {
++ nRet = BP_SUCCESS;
++ }
++ else
++ {
++ nRet = BP_VALUE_NOT_DEFINED;
++ }
++ }
++ else
++ {
++ *pusValue = BP_NOT_DEFINED;
++ nRet = BP_BOARD_ID_NOT_FOUND;
++ }
++ }
++ else
++ {
++ *pusValue = BP_NOT_DEFINED;
++ nRet = BP_BOARD_ID_NOT_SET;
++ }
++
++ return( nRet );
++} /* BpGetVoipResetGpio */
++
++/**************************************************************************
++ * Name : BpGetVoipIntrGpio
++ *
++ * Description: This function returns the GPIO pin assignment for VoIP interrupt.
++ *
++ * Parameters : [OUT] pusValue - Address of short word that the VOIP interrupt
++ * GPIO pin is returned in.
++ * [IN] dspNum - Address of the DSP to query.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetVoipIntrGpio( unsigned char dspNum, unsigned short *pusValue )
++{
++ int nRet;
++
++ if( g_pCurrentBp )
++ {
++ VOIP_DSP_INFO *pDspInfo = BpGetVoipDspConfig( dspNum );
++
++ if( pDspInfo )
++ {
++ *pusValue = pDspInfo->usGpioVoipIntr;
++
++ if( *pusValue != BP_NOT_DEFINED )
++ {
++ nRet = BP_SUCCESS;
++ }
++ else
++ {
++ nRet = BP_VALUE_NOT_DEFINED;
++ }
++ }
++ else
++ {
++ *pusValue = BP_NOT_DEFINED;
++ nRet = BP_BOARD_ID_NOT_FOUND;
++ }
++ }
++ else
++ {
++ *pusValue = BP_NOT_DEFINED;
++ nRet = BP_BOARD_ID_NOT_SET;
++ }
++
++ return( nRet );
++} /* BpGetVoipIntrGpio */
++
++/**************************************************************************
++ * Name : BpGetPcmciaResetGpio
++ *
++ * Description: This function returns the GPIO pin assignment for the PCMCIA
++ * Reset operation.
++ *
++ * Parameters : [OUT] pusValue - Address of short word that the PCMCIA reset
++ * GPIO pin is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetPcmciaResetGpio( unsigned short *pusValue )
++{
++ int nRet;
++
++ if( g_pCurrentBp )
++ {
++ *pusValue = g_pCurrentBp->usGpioPcmciaReset;
++
++ if( g_pCurrentBp->usGpioPcmciaReset != BP_NOT_DEFINED )
++ {
++ nRet = BP_SUCCESS;
++ }
++ else
++ {
++ nRet = BP_VALUE_NOT_DEFINED;
++ }
++ }
++ else
++ {
++ *pusValue = BP_NOT_DEFINED;
++ nRet = BP_BOARD_ID_NOT_SET;
++ }
++
++ return( nRet );
++} /* BpGetPcmciaResetGpio */
++
++/**************************************************************************
++ * Name : BpGetUartRtsCtsGpios
++ *
++ * Description: This function returns the GPIO pin assignments for RTS and CTS
++ * UART signals.
++ *
++ * Parameters : [OUT] pusRts - Address of short word that the UART RTS GPIO
++ * pin is returned in.
++ * [OUT] pusCts - Address of short word that the UART CTS GPIO
++ * pin is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, values are returned.
++ * BP_BOARD_ID_NOT_SET - Error, board id input string does not
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetRtsCtsUartGpios( unsigned short *pusRts, unsigned short *pusCts )
++{
++ int nRet;
++
++ if( g_pCurrentBp )
++ {
++ *pusRts = g_pCurrentBp->usGpioUartRts;
++ *pusCts = g_pCurrentBp->usGpioUartCts;
++
++ if( g_pCurrentBp->usGpioUartRts != BP_NOT_DEFINED &&
++ g_pCurrentBp->usGpioUartCts != BP_NOT_DEFINED )
++ {
++ nRet = BP_SUCCESS;
++ }
++ else
++ {
++ nRet = BP_VALUE_NOT_DEFINED;
++ }
++ }
++ else
++ {
++ *pusRts = *pusCts = BP_NOT_DEFINED;
++ nRet = BP_BOARD_ID_NOT_SET;
++ }
++
++ return( nRet );
++} /* BpGetUartRtsCtsGpios */
++
++/**************************************************************************
++ * Name : BpGetAdslLedGpio
++ *
++ * Description: This function returns the GPIO pin assignment for the ADSL
++ * LED.
++ *
++ * Parameters : [OUT] pusValue - Address of short word that the ADSL LED
++ * GPIO pin is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetAdslLedGpio( unsigned short *pusValue )
++{
++ int nRet;
++
++ if( g_pCurrentBp )
++ {
++ *pusValue = g_pCurrentBp->usGpioLedAdsl;
++
++ if( g_pCurrentBp->usGpioLedAdsl != BP_NOT_DEFINED )
++ {
++ nRet = BP_SUCCESS;
++ }
++ else
++ {
++ nRet = BP_VALUE_NOT_DEFINED;
++ }
++ }
++ else
++ {
++ *pusValue = BP_NOT_DEFINED;
++ nRet = BP_BOARD_ID_NOT_SET;
++ }
++
++ return( nRet );
++} /* BpGetAdslLedGpio */
++
++/**************************************************************************
++ * Name : BpGetAdslFailLedGpio
++ *
++ * Description: This function returns the GPIO pin assignment for the ADSL
++ * LED that is used when there is a DSL connection failure.
++ *
++ * Parameters : [OUT] pusValue - Address of short word that the ADSL LED
++ * GPIO pin is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetAdslFailLedGpio( unsigned short *pusValue )
++{
++ int nRet;
++
++ if( g_pCurrentBp )
++ {
++ *pusValue = g_pCurrentBp->usGpioLedAdslFail;
++
++ if( g_pCurrentBp->usGpioLedAdslFail != BP_NOT_DEFINED )
++ {
++ nRet = BP_SUCCESS;
++ }
++ else
++ {
++ nRet = BP_VALUE_NOT_DEFINED;
++ }
++ }
++ else
++ {
++ *pusValue = BP_NOT_DEFINED;
++ nRet = BP_BOARD_ID_NOT_SET;
++ }
++
++ return( nRet );
++} /* BpGetAdslFailLedGpio */
++
++/**************************************************************************
++ * Name : BpGetWirelessLedGpio
++ *
++ * Description: This function returns the GPIO pin assignment for the Wireless
++ * LED.
++ *
++ * Parameters : [OUT] pusValue - Address of short word that the Wireless LED
++ * GPIO pin is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetWirelessLedGpio( unsigned short *pusValue )
++{
++ int nRet;
++
++ if( g_pCurrentBp )
++ {
++ *pusValue = g_pCurrentBp->usGpioLedWireless;
++
++ if( g_pCurrentBp->usGpioLedWireless != BP_NOT_DEFINED )
++ {
++ nRet = BP_SUCCESS;
++ }
++ else
++ {
++ nRet = BP_VALUE_NOT_DEFINED;
++ }
++ }
++ else
++ {
++ *pusValue = BP_NOT_DEFINED;
++ nRet = BP_BOARD_ID_NOT_SET;
++ }
++
++ return( nRet );
++} /* BpGetWirelessLedGpio */
++
++/**************************************************************************
++ * Name : BpGetWirelessAntInUse
++ *
++ * Description: This function returns the antennas in use for wireless
++ *
++ * Parameters : [OUT] pusValue - Address of short word that the Wireless Antenna
++ * is in use.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetWirelessAntInUse( unsigned short *pusValue )
++{
++ int nRet;
++
++ if( g_pCurrentBp )
++ {
++ *pusValue = g_pCurrentBp->usAntInUseWireless;
++
++ if( g_pCurrentBp->usAntInUseWireless != BP_NOT_DEFINED )
++ {
++ nRet = BP_SUCCESS;
++ }
++ else
++ {
++ nRet = BP_VALUE_NOT_DEFINED;
++ }
++ }
++ else
++ {
++ *pusValue = BP_NOT_DEFINED;
++ nRet = BP_BOARD_ID_NOT_SET;
++ }
++
++ return( nRet );
++} /* BpGetWirelessAntInUse */
++
++/**************************************************************************
++ * Name : BpGetWirelessSesBtnGpio
++ *
++ * Description: This function returns the GPIO pin assignment for the Wireless
++ * Ses Button.
++ *
++ * Parameters : [OUT] pusValue - Address of short word that the Wireless LED
++ * GPIO pin is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetWirelessSesBtnGpio( unsigned short *pusValue )
++{
++ int nRet;
++
++ if( g_pCurrentBp )
++ {
++ *pusValue = g_pCurrentBp->usGpioSesBtnWireless;
++
++ if( g_pCurrentBp->usGpioSesBtnWireless != BP_NOT_DEFINED )
++ {
++ nRet = BP_SUCCESS;
++ }
++ else
++ {
++ nRet = BP_VALUE_NOT_DEFINED;
++ }
++ }
++ else
++ {
++ *pusValue = BP_NOT_DEFINED;
++ nRet = BP_BOARD_ID_NOT_SET;
++ }
++
++ return( nRet );
++} /* BpGetWirelessSesBtnGpio */
++
++/**************************************************************************
++ * Name : BpGetWirelessSesExtIntr
++ *
++ * Description: This function returns the external interrupt number for the
++ * Wireless Ses Button.
++ *
++ * Parameters : [OUT] pusValue - Address of short word that the Wireless Ses
++ * external interrup is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetWirelessSesExtIntr( unsigned short *pusValue )
++{
++ int nRet;
++
++ if( g_pCurrentBp )
++ {
++ *pusValue = g_pCurrentBp->usExtIntrSesBtnWireless;
++
++ if( g_pCurrentBp->usExtIntrSesBtnWireless != BP_NOT_DEFINED )
++ {
++ nRet = BP_SUCCESS;
++ }
++ else
++ {
++ nRet = BP_VALUE_NOT_DEFINED;
++ }
++ }
++ else
++ {
++ *pusValue = BP_NOT_DEFINED;
++ nRet = BP_BOARD_ID_NOT_SET;
++ }
++
++ return( nRet );
++
++} /* BpGetWirelessSesExtIntr */
++
++/**************************************************************************
++ * Name : BpGetWirelessSesLedGpio
++ *
++ * Description: This function returns the GPIO pin assignment for the Wireless
++ * Ses Led.
++ *
++ * Parameters : [OUT] pusValue - Address of short word that the Wireless Ses
++ * Led GPIO pin is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetWirelessSesLedGpio( unsigned short *pusValue )
++{
++ int nRet;
++
++ if( g_pCurrentBp )
++ {
++ *pusValue = g_pCurrentBp->usGpioLedSesWireless;
++
++ if( g_pCurrentBp->usGpioLedSesWireless != BP_NOT_DEFINED )
++ {
++ nRet = BP_SUCCESS;
++ }
++ else
++ {
++ nRet = BP_VALUE_NOT_DEFINED;
++ }
++ }
++ else
++ {
++ *pusValue = BP_NOT_DEFINED;
++ nRet = BP_BOARD_ID_NOT_SET;
++ }
++
++ return( nRet );
++
++} /* BpGetWirelessSesLedGpio */
++
++/**************************************************************************
++ * Name : BpGetUsbLedGpio
++ *
++ * Description: This function returns the GPIO pin assignment for the USB
++ * LED.
++ *
++ * Parameters : [OUT] pusValue - Address of short word that the USB LED
++ * GPIO pin is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetUsbLedGpio( unsigned short *pusValue )
++{
++ int nRet;
++
++ if( g_pCurrentBp )
++ {
++ *pusValue = g_pCurrentBp->usGpioLedUsb;
++
++ if( g_pCurrentBp->usGpioLedUsb != BP_NOT_DEFINED )
++ {
++ nRet = BP_SUCCESS;
++ }
++ else
++ {
++ nRet = BP_VALUE_NOT_DEFINED;
++ }
++ }
++ else
++ {
++ *pusValue = BP_NOT_DEFINED;
++ nRet = BP_BOARD_ID_NOT_SET;
++ }
++
++ return( nRet );
++} /* BpGetUsbLedGpio */
++
++/**************************************************************************
++ * Name : BpGetHpnaLedGpio
++ *
++ * Description: This function returns the GPIO pin assignment for the HPNA
++ * LED.
++ *
++ * Parameters : [OUT] pusValue - Address of short word that the HPNA LED
++ * GPIO pin is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetHpnaLedGpio( unsigned short *pusValue )
++{
++ int nRet;
++
++ if( g_pCurrentBp )
++ {
++ *pusValue = g_pCurrentBp->usGpioLedHpna;
++
++ if( g_pCurrentBp->usGpioLedHpna != BP_NOT_DEFINED )
++ {
++ nRet = BP_SUCCESS;
++ }
++ else
++ {
++ nRet = BP_VALUE_NOT_DEFINED;
++ }
++ }
++ else
++ {
++ *pusValue = BP_NOT_DEFINED;
++ nRet = BP_BOARD_ID_NOT_SET;
++ }
++
++ return( nRet );
++} /* BpGetHpnaLedGpio */
++
++/**************************************************************************
++ * Name : BpGetWanDataLedGpio
++ *
++ * Description: This function returns the GPIO pin assignment for the WAN Data
++ * LED.
++ *
++ * Parameters : [OUT] pusValue - Address of short word that the WAN Data LED
++ * GPIO pin is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetWanDataLedGpio( unsigned short *pusValue )
++{
++ int nRet;
++
++ if( g_pCurrentBp )
++ {
++ *pusValue = g_pCurrentBp->usGpioLedWanData;
++
++ if( g_pCurrentBp->usGpioLedWanData != BP_NOT_DEFINED )
++ {
++ nRet = BP_SUCCESS;
++ }
++ else
++ {
++ nRet = BP_VALUE_NOT_DEFINED;
++ }
++ }
++ else
++ {
++ *pusValue = BP_NOT_DEFINED;
++ nRet = BP_BOARD_ID_NOT_SET;
++ }
++
++ return( nRet );
++} /* BpGetWanDataLedGpio */
++
++/**************************************************************************
++ * Name : BpGetPppLedGpio
++ *
++ * Description: This function returns the GPIO pin assignment for the PPP
++ * LED.
++ *
++ * Parameters : [OUT] pusValue - Address of short word that the PPP LED
++ * GPIO pin is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetPppLedGpio( unsigned short *pusValue )
++{
++ int nRet;
++
++ if( g_pCurrentBp )
++ {
++ *pusValue = g_pCurrentBp->usGpioLedPpp;
++
++ if( g_pCurrentBp->usGpioLedPpp != BP_NOT_DEFINED )
++ {
++ nRet = BP_SUCCESS;
++ }
++ else
++ {
++ nRet = BP_VALUE_NOT_DEFINED;
++ }
++ }
++ else
++ {
++ *pusValue = BP_NOT_DEFINED;
++ nRet = BP_BOARD_ID_NOT_SET;
++ }
++
++ return( nRet );
++} /* BpGetPppLedGpio */
++
++/**************************************************************************
++ * Name : BpGetPppFailLedGpio
++ *
++ * Description: This function returns the GPIO pin assignment for the PPP
++ * LED that is used when there is a PPP connection failure.
++ *
++ * Parameters : [OUT] pusValue - Address of short word that the PPP LED
++ * GPIO pin is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetPppFailLedGpio( unsigned short *pusValue )
++{
++ int nRet;
++
++ if( g_pCurrentBp )
++ {
++ *pusValue = g_pCurrentBp->usGpioLedPppFail;
++
++ if( g_pCurrentBp->usGpioLedPppFail != BP_NOT_DEFINED )
++ {
++ nRet = BP_SUCCESS;
++ }
++ else
++ {
++ nRet = BP_VALUE_NOT_DEFINED;
++ }
++ }
++ else
++ {
++ *pusValue = BP_NOT_DEFINED;
++ nRet = BP_BOARD_ID_NOT_SET;
++ }
++
++ return( nRet );
++} /* BpGetPppFailLedGpio */
++
++/**************************************************************************
++ * Name : BpGetBootloaderPowerOnLedGpio
++ *
++ * Description: This function returns the GPIO pin assignment for the power
++ * on LED that is set by the bootloader.
++ *
++ * Parameters : [OUT] pusValue - Address of short word that the alarm LED
++ * GPIO pin is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetBootloaderPowerOnLedGpio( unsigned short *pusValue )
++{
++ int nRet;
++
++ if( g_pCurrentBp )
++ {
++ *pusValue = g_pCurrentBp->usGpioLedBlPowerOn;
++
++ if( g_pCurrentBp->usGpioLedBlPowerOn != BP_NOT_DEFINED )
++ {
++ nRet = BP_SUCCESS;
++ }
++ else
++ {
++ nRet = BP_VALUE_NOT_DEFINED;
++ }
++ }
++ else
++ {
++ *pusValue = BP_NOT_DEFINED;
++ nRet = BP_BOARD_ID_NOT_SET;
++ }
++
++ return( nRet );
++} /* BpGetBootloaderPowerOn */
++
++/**************************************************************************
++ * Name : BpGetBootloaderAlarmLedGpio
++ *
++ * Description: This function returns the GPIO pin assignment for the alarm
++ * LED that is set by the bootloader.
++ *
++ * Parameters : [OUT] pusValue - Address of short word that the alarm LED
++ * GPIO pin is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetBootloaderAlarmLedGpio( unsigned short *pusValue )
++{
++ int nRet;
++
++ if( g_pCurrentBp )
++ {
++ *pusValue = g_pCurrentBp->usGpioLedBlAlarm;
++
++ if( g_pCurrentBp->usGpioLedBlAlarm != BP_NOT_DEFINED )
++ {
++ nRet = BP_SUCCESS;
++ }
++ else
++ {
++ nRet = BP_VALUE_NOT_DEFINED;
++ }
++ }
++ else
++ {
++ *pusValue = BP_NOT_DEFINED;
++ nRet = BP_BOARD_ID_NOT_SET;
++ }
++
++ return( nRet );
++} /* BpGetBootloaderAlarmLedGpio */
++
++/**************************************************************************
++ * Name : BpGetBootloaderResetCfgLedGpio
++ *
++ * Description: This function returns the GPIO pin assignment for the reset
++ * configuration LED that is set by the bootloader.
++ *
++ * Parameters : [OUT] pusValue - Address of short word that the reset
++ * configuration LED GPIO pin is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetBootloaderResetCfgLedGpio( unsigned short *pusValue )
++{
++ int nRet;
++
++ if( g_pCurrentBp )
++ {
++ *pusValue = g_pCurrentBp->usGpioLedBlResetCfg;
++
++ if( g_pCurrentBp->usGpioLedBlResetCfg != BP_NOT_DEFINED )
++ {
++ nRet = BP_SUCCESS;
++ }
++ else
++ {
++ nRet = BP_VALUE_NOT_DEFINED;
++ }
++ }
++ else
++ {
++ *pusValue = BP_NOT_DEFINED;
++ nRet = BP_BOARD_ID_NOT_SET;
++ }
++
++ return( nRet );
++} /* BpGetBootloaderResetCfgLedGpio */
++
++/**************************************************************************
++ * Name : BpGetBootloaderStopLedGpio
++ *
++ * Description: This function returns the GPIO pin assignment for the break
++ * into bootloader LED that is set by the bootloader.
++ *
++ * Parameters : [OUT] pusValue - Address of short word that the break into
++ * bootloader LED GPIO pin is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetBootloaderStopLedGpio( unsigned short *pusValue )
++{
++ int nRet;
++
++ if( g_pCurrentBp )
++ {
++ *pusValue = g_pCurrentBp->usGpioLedBlStop;
++
++ if( g_pCurrentBp->usGpioLedBlStop != BP_NOT_DEFINED )
++ {
++ nRet = BP_SUCCESS;
++ }
++ else
++ {
++ nRet = BP_VALUE_NOT_DEFINED;
++ }
++ }
++ else
++ {
++ *pusValue = BP_NOT_DEFINED;
++ nRet = BP_BOARD_ID_NOT_SET;
++ }
++
++ return( nRet );
++} /* BpGetBootloaderStopLedGpio */
++
++/**************************************************************************
++ * Name : BpGetVoipLedGpio
++ *
++ * Description: This function returns the GPIO pin assignment for the VOIP
++ * LED.
++ *
++ * Parameters : [OUT] pusValue - Address of short word that the VOIP LED
++ * GPIO pin is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ *
++ * Note : The VoIP structure would allow for having one LED per DSP
++ * however, the board initialization function assumes only one
++ * LED per functionality (ie one LED for VoIP). Therefore in
++ * order to keep this tidy and simple we do not make usage of the
++ * one-LED-per-DSP function. Instead, we assume that the LED for
++ * VoIP is unique and associated with DSP 0 (always present on
++ * any VoIP platform). If changing this to a LED-per-DSP function
++ * then one need to update the board initialization driver in
++ * bcmdrivers\opensource\char\board\bcm963xx\impl1
++ ***************************************************************************/
++int BpGetVoipLedGpio( unsigned short *pusValue )
++{
++ int nRet;
++
++ if( g_pCurrentBp )
++ {
++ VOIP_DSP_INFO *pDspInfo = BpGetVoipDspConfig( 0 );
++
++ if( pDspInfo )
++ {
++ *pusValue = pDspInfo->usGpioLedVoip;
++
++ if( *pusValue != BP_NOT_DEFINED )
++ {
++ nRet = BP_SUCCESS;
++ }
++ else
++ {
++ nRet = BP_VALUE_NOT_DEFINED;
++ }
++ }
++ else
++ {
++ *pusValue = BP_NOT_DEFINED;
++ nRet = BP_BOARD_ID_NOT_FOUND;
++ }
++ }
++ else
++ {
++ *pusValue = BP_NOT_DEFINED;
++ nRet = BP_BOARD_ID_NOT_SET;
++ }
++
++ return( nRet );
++} /* BpGetVoipLedGpio */
++
++/**************************************************************************
++ * Name : BpGetWirelessExtIntr
++ *
++ * Description: This function returns the Wireless external interrupt number.
++ *
++ * Parameters : [OUT] pulValue - Address of short word that the wireless
++ * external interrupt number is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetWirelessExtIntr( unsigned long *pulValue )
++{
++ int nRet;
++
++ if( g_pCurrentBp )
++ {
++ *pulValue = g_pCurrentBp->usExtIntrWireless;
++
++ if( g_pCurrentBp->usExtIntrWireless != BP_NOT_DEFINED )
++ {
++ nRet = BP_SUCCESS;
++ }
++ else
++ {
++ nRet = BP_VALUE_NOT_DEFINED;
++ }
++ }
++ else
++ {
++ *pulValue = BP_NOT_DEFINED;
++ nRet = BP_BOARD_ID_NOT_SET;
++ }
++
++ return( nRet );
++} /* BpGetWirelessExtIntr */
++
++/**************************************************************************
++ * Name : BpGetAdslDyingGaspExtIntr
++ *
++ * Description: This function returns the ADSL Dying Gasp external interrupt
++ * number.
++ *
++ * Parameters : [OUT] pulValue - Address of short word that the ADSL Dying Gasp
++ * external interrupt number is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetAdslDyingGaspExtIntr( unsigned long *pulValue )
++{
++ int nRet;
++
++ if( g_pCurrentBp )
++ {
++ *pulValue = g_pCurrentBp->usExtIntrAdslDyingGasp;
++
++ if( g_pCurrentBp->usExtIntrAdslDyingGasp != BP_NOT_DEFINED )
++ {
++ nRet = BP_SUCCESS;
++ }
++ else
++ {
++ nRet = BP_VALUE_NOT_DEFINED;
++ }
++ }
++ else
++ {
++ *pulValue = BP_NOT_DEFINED;
++ nRet = BP_BOARD_ID_NOT_SET;
++ }
++
++ return( nRet );
++} /* BpGetAdslDyingGaspExtIntr */
++
++/**************************************************************************
++ * Name : BpGetVoipExtIntr
++ *
++ * Description: This function returns the VOIP external interrupt number.
++ *
++ * Parameters : [OUT] pulValue - Address of short word that the VOIP
++ * external interrupt number is returned in.
++ * [IN] dspNum - Address of the DSP to query.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetVoipExtIntr( unsigned char dspNum, unsigned long *pulValue )
++{
++ int nRet;
++
++ if( g_pCurrentBp )
++ {
++ VOIP_DSP_INFO *pDspInfo = BpGetVoipDspConfig( dspNum );
++
++ if( pDspInfo )
++ {
++ *pulValue = pDspInfo->usExtIntrVoip;
++
++ if( *pulValue != BP_NOT_DEFINED )
++ {
++ nRet = BP_SUCCESS;
++ }
++ else
++ {
++ nRet = BP_VALUE_NOT_DEFINED;
++ }
++ }
++ else
++ {
++ *pulValue = BP_NOT_DEFINED;
++ nRet = BP_BOARD_ID_NOT_FOUND;
++ }
++ }
++ else
++ {
++ *pulValue = BP_NOT_DEFINED;
++ nRet = BP_BOARD_ID_NOT_SET;
++ }
++
++ return( nRet );
++} /* BpGetVoipExtIntr */
++
++/**************************************************************************
++ * Name : BpGetHpnaExtIntr
++ *
++ * Description: This function returns the HPNA external interrupt number.
++ *
++ * Parameters : [OUT] pulValue - Address of short word that the HPNA
++ * external interrupt number is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetHpnaExtIntr( unsigned long *pulValue )
++{
++ int nRet;
++
++ if( g_pCurrentBp )
++ {
++ *pulValue = g_pCurrentBp->usExtIntrHpna;
++
++ if( g_pCurrentBp->usExtIntrHpna != BP_NOT_DEFINED )
++ {
++ nRet = BP_SUCCESS;
++ }
++ else
++ {
++ nRet = BP_VALUE_NOT_DEFINED;
++ }
++ }
++ else
++ {
++ *pulValue = BP_NOT_DEFINED;
++ nRet = BP_BOARD_ID_NOT_SET;
++ }
++
++ return( nRet );
++} /* BpGetHpnaExtIntr */
++
++/**************************************************************************
++ * Name : BpGetHpnaChipSelect
++ *
++ * Description: This function returns the HPNA chip select number.
++ *
++ * Parameters : [OUT] pulValue - Address of short word that the HPNA
++ * chip select number is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetHpnaChipSelect( unsigned long *pulValue )
++{
++ int nRet;
++
++ if( g_pCurrentBp )
++ {
++ *pulValue = g_pCurrentBp->usCsHpna;
++
++ if( g_pCurrentBp->usCsHpna != BP_NOT_DEFINED )
++ {
++ nRet = BP_SUCCESS;
++ }
++ else
++ {
++ nRet = BP_VALUE_NOT_DEFINED;
++ }
++ }
++ else
++ {
++ *pulValue = BP_NOT_DEFINED;
++ nRet = BP_BOARD_ID_NOT_SET;
++ }
++
++ return( nRet );
++} /* BpGetHpnaChipSelect */
++
++/**************************************************************************
++ * Name : BpGetVoipChipSelect
++ *
++ * Description: This function returns the VOIP chip select number.
++ *
++ * Parameters : [OUT] pulValue - Address of short word that the VOIP
++ * chip select number is returned in.
++ * [IN] dspNum - Address of the DSP to query.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetVoipChipSelect( unsigned char dspNum, unsigned long *pulValue )
++{
++ int nRet;
++
++ if( g_pCurrentBp )
++ {
++ VOIP_DSP_INFO *pDspInfo = BpGetVoipDspConfig( dspNum );
++
++ if( pDspInfo )
++ {
++ *pulValue = pDspInfo->usCsVoip;
++
++ if( *pulValue != BP_NOT_DEFINED )
++ {
++ nRet = BP_SUCCESS;
++ }
++ else
++ {
++ nRet = BP_VALUE_NOT_DEFINED;
++ }
++ }
++ else
++ {
++ *pulValue = BP_NOT_DEFINED;
++ nRet = BP_BOARD_ID_NOT_FOUND;
++ }
++ }
++ else
++ {
++ *pulValue = BP_NOT_DEFINED;
++ nRet = BP_BOARD_ID_NOT_SET;
++ }
++
++ return( nRet );
++} /* BpGetVoipChipSelect */
++
+diff -urN linux-2.6.8.1/boardparams/bcm963xx/boardparms.h linux-2.6.8.1-brcm63xx/boardparms/bcm963xx/boardparms.h
+--- linux-2.6.8.1/boardparams/bcm963xx/boardparms.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.8.1-brcm63xx/boardparms/bcm963xx/boardparms.h 2006-06-26 09:07:10.000000000 +0200
+@@ -0,0 +1,766 @@
++/*
++<:copyright-gpl
++
++ Copyright 2003 Broadcom Corp. All Rights Reserved.
++
++ This program is free software; you can distribute it and/or modify it
++ under the terms of the GNU General Public License (Version 2) as
++ published by the Free Software Foundation.
++
++ This program is distributed in the hope it will be useful, but WITHOUT
++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
++ for more details.
++
++ You should have received a copy of the GNU General Public License along
++ with this program; if not, write to the Free Software Foundation, Inc.,
++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
++
++:>
++*/
++/**************************************************************************
++ * File Name : boardparms.h
++ *
++ * Description: This file contains definitions and function prototypes for
++ * the BCM63xx board parameter access functions.
++ *
++ * Updates : 07/14/2003 Created.
++ ***************************************************************************/
++
++#if !defined(_BOARDPARMS_H)
++#define _BOARDPARMS_H
++#define CONFIG_BCM96348
++#if __cplusplus
++extern "C" {
++#endif
++
++/* Return codes. */
++#define BP_SUCCESS 0
++#define BP_BOARD_ID_NOT_FOUND 1
++#define BP_VALUE_NOT_DEFINED 2
++#define BP_BOARD_ID_NOT_SET 3
++
++/* Values for BpGetSdramSize. */
++#define BP_MEMORY_8MB_1_CHIP 0
++#define BP_MEMORY_16MB_1_CHIP 1
++#define BP_MEMORY_32MB_1_CHIP 2
++#define BP_MEMORY_64MB_2_CHIP 3
++#define BP_MEMORY_32MB_2_CHIP 4
++#define BP_MEMORY_16MB_2_CHIP 5
++
++/* Values for EthernetMacInfo PhyType. */
++#define BP_ENET_NO_PHY 0
++#define BP_ENET_INTERNAL_PHY 1
++#define BP_ENET_EXTERNAL_PHY 2
++#define BP_ENET_EXTERNAL_SWITCH 3
++
++/* Values for EthernetMacInfo Configuration type. */
++#define BP_ENET_CONFIG_MDIO 0 /* Internal PHY, External PHY, Switch+(no GPIO, no SPI, no MDIO Pseudo phy */
++#define BP_ENET_CONFIG_GPIO 1 /* Bcm96345GW board + Bcm5325M/E */
++#define BP_ENET_CONFIG_MDIO_PSEUDO_PHY 2 /* Bcm96348GW board + Bcm5325E */
++#define BP_ENET_CONFIG_SPI_SSB_0 3 /* Bcm96348GW board + Bcm5325M/E */
++#define BP_ENET_CONFIG_SPI_SSB_1 4 /* Bcm96348GW board + Bcm5325M/E */
++#define BP_ENET_CONFIG_SPI_SSB_2 5 /* Bcm96348GW board + Bcm5325M/E */
++#define BP_ENET_CONFIG_SPI_SSB_3 6 /* Bcm96348GW board + Bcm5325M/E */
++
++/* Values for EthernetMacInfo Reverse MII. */
++#define BP_ENET_NO_REVERSE_MII 0
++#define BP_ENET_REVERSE_MII 1
++
++/* Values for VoIPDSPInfo DSPType. */
++#define BP_VOIP_NO_DSP 0
++#define BP_VOIP_DSP 1
++
++
++/* Values for GPIO pin assignments (AH = Active High, AL = Active Low). */
++#define BP_ACTIVE_MASK 0x8000
++#define BP_ACTIVE_HIGH 0x0000
++#define BP_ACTIVE_LOW 0x8000
++#define BP_GPIO_0_AH (0 | BP_ACTIVE_HIGH)
++#define BP_GPIO_0_AL (0 | BP_ACTIVE_LOW)
++#define BP_GPIO_1_AH (1 | BP_ACTIVE_HIGH)
++#define BP_GPIO_1_AL (1 | BP_ACTIVE_LOW)
++#define BP_GPIO_2_AH (2 | BP_ACTIVE_HIGH)
++#define BP_GPIO_2_AL (2 | BP_ACTIVE_LOW)
++#define BP_GPIO_3_AH (3 | BP_ACTIVE_HIGH)
++#define BP_GPIO_3_AL (3 | BP_ACTIVE_LOW)
++#define BP_GPIO_4_AH (4 | BP_ACTIVE_HIGH)
++#define BP_GPIO_4_AL (4 | BP_ACTIVE_LOW)
++#define BP_GPIO_5_AH (5 | BP_ACTIVE_HIGH)
++#define BP_GPIO_5_AL (5 | BP_ACTIVE_LOW)
++#define BP_GPIO_6_AH (6 | BP_ACTIVE_HIGH)
++#define BP_GPIO_6_AL (6 | BP_ACTIVE_LOW)
++#define BP_GPIO_7_AH (7 | BP_ACTIVE_HIGH)
++#define BP_GPIO_7_AL (7 | BP_ACTIVE_LOW)
++#define BP_GPIO_8_AH (8 | BP_ACTIVE_HIGH)
++#define BP_GPIO_8_AL (8 | BP_ACTIVE_LOW)
++#define BP_GPIO_9_AH (9 | BP_ACTIVE_HIGH)
++#define BP_GPIO_9_AL (9 | BP_ACTIVE_LOW)
++#define BP_GPIO_10_AH (10 | BP_ACTIVE_HIGH)
++#define BP_GPIO_10_AL (10 | BP_ACTIVE_LOW)
++#define BP_GPIO_11_AH (11 | BP_ACTIVE_HIGH)
++#define BP_GPIO_11_AL (11 | BP_ACTIVE_LOW)
++#define BP_GPIO_12_AH (12 | BP_ACTIVE_HIGH)
++#define BP_GPIO_12_AL (12 | BP_ACTIVE_LOW)
++#define BP_GPIO_13_AH (13 | BP_ACTIVE_HIGH)
++#define BP_GPIO_13_AL (13 | BP_ACTIVE_LOW)
++#define BP_GPIO_14_AH (14 | BP_ACTIVE_HIGH)
++#define BP_GPIO_14_AL (14 | BP_ACTIVE_LOW)
++#define BP_GPIO_15_AH (15 | BP_ACTIVE_HIGH)
++#define BP_GPIO_15_AL (15 | BP_ACTIVE_LOW)
++#define BP_GPIO_16_AH (16 | BP_ACTIVE_HIGH)
++#define BP_GPIO_16_AL (16 | BP_ACTIVE_LOW)
++#define BP_GPIO_17_AH (17 | BP_ACTIVE_HIGH)
++#define BP_GPIO_17_AL (17 | BP_ACTIVE_LOW)
++#define BP_GPIO_18_AH (18 | BP_ACTIVE_HIGH)
++#define BP_GPIO_18_AL (18 | BP_ACTIVE_LOW)
++#define BP_GPIO_19_AH (19 | BP_ACTIVE_HIGH)
++#define BP_GPIO_19_AL (19 | BP_ACTIVE_LOW)
++#define BP_GPIO_20_AH (20 | BP_ACTIVE_HIGH)
++#define BP_GPIO_20_AL (20 | BP_ACTIVE_LOW)
++#define BP_GPIO_21_AH (21 | BP_ACTIVE_HIGH)
++#define BP_GPIO_21_AL (21 | BP_ACTIVE_LOW)
++#define BP_GPIO_22_AH (22 | BP_ACTIVE_HIGH)
++#define BP_GPIO_22_AL (22 | BP_ACTIVE_LOW)
++#define BP_GPIO_23_AH (23 | BP_ACTIVE_HIGH)
++#define BP_GPIO_23_AL (23 | BP_ACTIVE_LOW)
++#define BP_GPIO_24_AH (24 | BP_ACTIVE_HIGH)
++#define BP_GPIO_24_AL (24 | BP_ACTIVE_LOW)
++#define BP_GPIO_25_AH (25 | BP_ACTIVE_HIGH)
++#define BP_GPIO_25_AL (25 | BP_ACTIVE_LOW)
++#define BP_GPIO_26_AH (26 | BP_ACTIVE_HIGH)
++#define BP_GPIO_26_AL (26 | BP_ACTIVE_LOW)
++#define BP_GPIO_27_AH (27 | BP_ACTIVE_HIGH)
++#define BP_GPIO_27_AL (27 | BP_ACTIVE_LOW)
++#define BP_GPIO_28_AH (28 | BP_ACTIVE_HIGH)
++#define BP_GPIO_28_AL (28 | BP_ACTIVE_LOW)
++#define BP_GPIO_29_AH (29 | BP_ACTIVE_HIGH)
++#define BP_GPIO_29_AL (29 | BP_ACTIVE_LOW)
++#define BP_GPIO_30_AH (30 | BP_ACTIVE_HIGH)
++#define BP_GPIO_30_AL (30 | BP_ACTIVE_LOW)
++#define BP_GPIO_31_AH (31 | BP_ACTIVE_HIGH)
++#define BP_GPIO_31_AL (31 | BP_ACTIVE_LOW)
++#define BP_GPIO_32_AH (32 | BP_ACTIVE_HIGH)
++#define BP_GPIO_32_AL (32 | BP_ACTIVE_LOW)
++#define BP_GPIO_33_AH (33 | BP_ACTIVE_HIGH)
++#define BP_GPIO_33_AL (33 | BP_ACTIVE_LOW)
++#define BP_GPIO_34_AH (34 | BP_ACTIVE_HIGH)
++#define BP_GPIO_34_AL (34 | BP_ACTIVE_LOW)
++#define BP_GPIO_35_AH (35 | BP_ACTIVE_HIGH)
++#define BP_GPIO_35_AL (35 | BP_ACTIVE_LOW)
++#define BP_GPIO_36_AH (36 | BP_ACTIVE_HIGH)
++#define BP_GPIO_36_AL (36 | BP_ACTIVE_LOW)
++
++/* Values for external interrupt assignments. */
++#define BP_EXT_INTR_0 0
++#define BP_EXT_INTR_1 1
++#define BP_EXT_INTR_2 2
++#define BP_EXT_INTR_3 3
++
++/* Values for chip select assignments. */
++#define BP_CS_0 0
++#define BP_CS_1 1
++#define BP_CS_2 2
++#define BP_CS_3 3
++
++/* Value for GPIO and external interrupt fields that are not used. */
++#define BP_NOT_DEFINED 0xffff
++#define BP_HW_DEFINED 0xfff0
++#define BP_UNEQUIPPED 0xfff1
++
++/* Maximum size of the board id string. */
++#define BP_BOARD_ID_LEN 16
++
++/* Maximum number of Ethernet MACs. */
++#define BP_MAX_ENET_MACS 2
++
++/* Maximum number of VoIP DSPs. */
++#define BP_MAX_VOIP_DSP 2
++
++/* Wireless Antenna Settings. */
++#define BP_WLAN_ANT_MAIN 0
++#define BP_WLAN_ANT_AUX 1
++#define BP_WLAN_ANT_BOTH 3
++
++#if !defined(__ASSEMBLER__)
++
++/* Information about an Ethernet MAC. If ucPhyType is BP_ENET_NO_PHY,
++ * then the other fields are not valid.
++ */
++typedef struct EthernetMacInfo
++{
++ unsigned char ucPhyType; /* BP_ENET_xxx */
++ unsigned char ucPhyAddress; /* 0 to 31 */
++ unsigned short usGpioPhySpiSck; /* GPIO pin or not defined */
++ unsigned short usGpioPhySpiSs; /* GPIO pin or not defined */
++ unsigned short usGpioPhySpiMosi; /* GPIO pin or not defined */
++ unsigned short usGpioPhySpiMiso; /* GPIO pin or not defined */
++ unsigned short usGpioPhyReset; /* GPIO pin or not defined (96348LV) */
++ unsigned short numSwitchPorts; /* Number of PHY ports */
++ unsigned short usConfigType; /* Configuration type */
++ unsigned short usReverseMii; /* Reverse MII */
++} ETHERNET_MAC_INFO, *PETHERNET_MAC_INFO;
++
++
++/* Information about VoIP DSPs. If ucDspType is BP_VOIP_NO_DSP,
++ * then the other fields are not valid.
++ */
++typedef struct VoIPDspInfo
++{
++ unsigned char ucDspType;
++ unsigned char ucDspAddress;
++ unsigned short usExtIntrVoip;
++ unsigned short usGpioVoipReset;
++ unsigned short usGpioVoipIntr;
++ unsigned short usGpioLedVoip;
++ unsigned short usCsVoip;
++
++} VOIP_DSP_INFO;
++
++
++/**************************************************************************
++ * Name : BpSetBoardId
++ *
++ * Description: This function find the BOARD_PARAMETERS structure for the
++ * specified board id string and assigns it to a global, static
++ * variable.
++ *
++ * Parameters : [IN] pszBoardId - Board id string that is saved into NVRAM.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_FOUND - Error, board id input string does not
++ * have a board parameters configuration record.
++ ***************************************************************************/
++int BpSetBoardId( char *pszBoardId );
++
++/**************************************************************************
++ * Name : BpGetBoardIds
++ *
++ * Description: This function returns all of the supported board id strings.
++ *
++ * Parameters : [OUT] pszBoardIds - Address of a buffer that the board id
++ * strings are returned in. Each id starts at BP_BOARD_ID_LEN
++ * boundary.
++ * [IN] nBoardIdsSize - Number of BP_BOARD_ID_LEN elements that
++ * were allocated in pszBoardIds.
++ *
++ * Returns : Number of board id strings returned.
++ ***************************************************************************/
++int BpGetBoardIds( char *pszBoardIds, int nBoardIdsSize );
++
++/**************************************************************************
++ * Name : BpGetEthernetMacInfo
++ *
++ * Description: This function returns all of the supported board id strings.
++ *
++ * Parameters : [OUT] pEnetInfos - Address of an array of ETHERNET_MAC_INFO
++ * buffers.
++ * [IN] nNumEnetInfos - Number of ETHERNET_MAC_INFO elements that
++ * are pointed to by pEnetInfos.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ ***************************************************************************/
++int BpGetEthernetMacInfo( PETHERNET_MAC_INFO pEnetInfos, int nNumEnetInfos );
++
++/**************************************************************************
++ * Name : BpGetSdramSize
++ *
++ * Description: This function returns a constant that describees the board's
++ * SDRAM type and size.
++ *
++ * Parameters : [OUT] pulSdramSize - Address of short word that the SDRAM size
++ * is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ ***************************************************************************/
++int BpGetSdramSize( unsigned long *pulSdramSize );
++
++/**************************************************************************
++ * Name : BpGetPsiSize
++ *
++ * Description: This function returns the persistent storage size in K bytes.
++ *
++ * Parameters : [OUT] pulPsiSize - Address of short word that the persistent
++ * storage size is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ ***************************************************************************/
++int BpGetPsiSize( unsigned long *pulPsiSize );
++
++/**************************************************************************
++ * Name : BpGetRj11InnerOuterPairGpios
++ *
++ * Description: This function returns the GPIO pin assignments for changing
++ * between the RJ11 inner pair and RJ11 outer pair.
++ *
++ * Parameters : [OUT] pusInner - Address of short word that the RJ11 inner pair
++ * GPIO pin is returned in.
++ * [OUT] pusOuter - Address of short word that the RJ11 outer pair
++ * GPIO pin is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, values are returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetRj11InnerOuterPairGpios( unsigned short *pusInner,
++ unsigned short *pusOuter );
++
++/**************************************************************************
++ * Name : BpGetPressAndHoldResetGpio
++ *
++ * Description: This function returns the GPIO pin assignment for the press
++ * and hold reset button.
++ *
++ * Parameters : [OUT] pusValue - Address of short word that the press and hold
++ * reset button GPIO pin is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetPressAndHoldResetGpio( unsigned short *pusValue );
++
++/**************************************************************************
++ * Name : BpGetVoipResetGpio
++ *
++ * Description: This function returns the GPIO pin assignment for the VOIP
++ * Reset operation.
++ *
++ * Parameters : [OUT] pusValue - Address of short word that the VOIP reset
++ * GPIO pin is returned in.
++ * [IN] dspNum - Address of the DSP to query.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetVoipResetGpio( unsigned char dspNum, unsigned short *pusValue );
++
++/**************************************************************************
++ * Name : BpGetVoipIntrGpio
++ *
++ * Description: This function returns the GPIO pin assignment for VoIP interrupt.
++ *
++ * Parameters : [OUT] pusValue - Address of short word that the VOIP interrupt
++ * GPIO pin is returned in.
++ * [IN] dspNum - Address of the DSP to query.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetVoipIntrGpio( unsigned char dspNum, unsigned short *pusValue );
++
++/**************************************************************************
++ * Name : BpGetPcmciaResetGpio
++ *
++ * Description: This function returns the GPIO pin assignment for the PCMCIA
++ * Reset operation.
++ *
++ * Parameters : [OUT] pusValue - Address of short word that the PCMCIA reset
++ * GPIO pin is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetPcmciaResetGpio( unsigned short *pusValue );
++
++/**************************************************************************
++ * Name : BpGetUartRtsCtsGpios
++ *
++ * Description: This function returns the GPIO pin assignments for RTS and CTS
++ * UART signals.
++ *
++ * Parameters : [OUT] pusRts - Address of short word that the UART RTS GPIO
++ * pin is returned in.
++ * [OUT] pusCts - Address of short word that the UART CTS GPIO
++ * pin is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, values are returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetRtsCtsUartGpios( unsigned short *pusRts, unsigned short *pusCts );
++
++/**************************************************************************
++ * Name : BpGetAdslLedGpio
++ *
++ * Description: This function returns the GPIO pin assignment for the ADSL
++ * LED.
++ *
++ * Parameters : [OUT] pusValue - Address of short word that the ADSL LED
++ * GPIO pin is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetAdslLedGpio( unsigned short *pusValue );
++
++/**************************************************************************
++ * Name : BpGetAdslFailLedGpio
++ *
++ * Description: This function returns the GPIO pin assignment for the ADSL
++ * LED that is used when there is a DSL connection failure.
++ *
++ * Parameters : [OUT] pusValue - Address of short word that the ADSL LED
++ * GPIO pin is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetAdslFailLedGpio( unsigned short *pusValue );
++
++/**************************************************************************
++ * Name : BpGetWirelessLedGpio
++ *
++ * Description: This function returns the GPIO pin assignment for the Wireless
++ * LED.
++ *
++ * Parameters : [OUT] pusValue - Address of short word that the Wireless LED
++ * GPIO pin is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetWirelessLedGpio( unsigned short *pusValue );
++
++/**************************************************************************
++ * Name : BpGetWirelessAntInUse
++ *
++ * Description: This function returns the antennas in use for wireless
++ *
++ * Parameters : [OUT] pusValue - Address of short word that the Wireless Antenna
++ * is in use.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetWirelessAntInUse( unsigned short *pusValue );
++
++/**************************************************************************
++ * Name : BpGetWirelessSesBtnGpio
++ *
++ * Description: This function returns the GPIO pin assignment for the Wireless
++ * Ses Button.
++ *
++ * Parameters : [OUT] pusValue - Address of short word that the Wireless Ses
++ * Button GPIO pin is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetWirelessSesBtnGpio( unsigned short *pusValue );
++
++/**************************************************************************
++ * Name : BpGetWirelessSesExtIntr
++ *
++ * Description: This function returns the external interrupt number for the
++ * Wireless Ses Button.
++ *
++ * Parameters : [OUT] pusValue - Address of short word that the Wireless Ses
++ * external interrup is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetWirelessSesExtIntr( unsigned short *pusValue );
++
++/**************************************************************************
++ * Name : BpGetWirelessSesLedGpio
++ *
++ * Description: This function returns the GPIO pin assignment for the Wireless
++ * Ses Led.
++ *
++ * Parameters : [OUT] pusValue - Address of short word that the Wireless Ses
++ * Led GPIO pin is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetWirelessSesLedGpio( unsigned short *pusValue );
++
++/**************************************************************************
++ * Name : BpGetUsbLedGpio
++ *
++ * Description: This function returns the GPIO pin assignment for the USB
++ * LED.
++ *
++ * Parameters : [OUT] pusValue - Address of short word that the USB LED
++ * GPIO pin is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetUsbLedGpio( unsigned short *pusValue );
++
++/**************************************************************************
++ * Name : BpGetHpnaLedGpio
++ *
++ * Description: This function returns the GPIO pin assignment for the HPNA
++ * LED.
++ *
++ * Parameters : [OUT] pusValue - Address of short word that the HPNA LED
++ * GPIO pin is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetHpnaLedGpio( unsigned short *pusValue );
++
++/**************************************************************************
++ * Name : BpGetWanDataLedGpio
++ *
++ * Description: This function returns the GPIO pin assignment for the WAN Data
++ * LED.
++ *
++ * Parameters : [OUT] pusValue - Address of short word that the WAN Data LED
++ * GPIO pin is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetWanDataLedGpio( unsigned short *pusValue );
++
++/**************************************************************************
++ * Name : BpGetPppLedGpio
++ *
++ * Description: This function returns the GPIO pin assignment for the PPP
++ * LED.
++ *
++ * Parameters : [OUT] pusValue - Address of short word that the PPP LED
++ * GPIO pin is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetPppLedGpio( unsigned short *pusValue );
++
++/**************************************************************************
++ * Name : BpGetPppFailLedGpio
++ *
++ * Description: This function returns the GPIO pin assignment for the PPP
++ * LED that is used when there is a PPP connection failure.
++ *
++ * Parameters : [OUT] pusValue - Address of short word that the PPP LED
++ * GPIO pin is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetPppFailLedGpio( unsigned short *pusValue );
++
++/**************************************************************************
++ * Name : BpGetVoipLedGpio
++ *
++ * Description: This function returns the GPIO pin assignment for the VOIP
++ * LED.
++ *
++ * Parameters : [OUT] pusValue - Address of short word that the VOIP LED
++ * GPIO pin is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetVoipLedGpio( unsigned short *pusValue );
++
++/**************************************************************************
++ * Name : BpGetBootloaderPowerOnLedGpio
++ *
++ * Description: This function returns the GPIO pin assignment for the power
++ * on LED that is set by the bootloader.
++ *
++ * Parameters : [OUT] pusValue - Address of short word that the alarm LED
++ * GPIO pin is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetBootloaderPowerOnLedGpio( unsigned short *pusValue );
++
++/**************************************************************************
++ * Name : BpGetBootloaderAlarmLedGpio
++ *
++ * Description: This function returns the GPIO pin assignment for the alarm
++ * LED that is set by the bootloader.
++ *
++ * Parameters : [OUT] pusValue - Address of short word that the alarm LED
++ * GPIO pin is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetBootloaderAlarmLedGpio( unsigned short *pusValue );
++
++/**************************************************************************
++ * Name : BpGetBootloaderResetCfgLedGpio
++ *
++ * Description: This function returns the GPIO pin assignment for the reset
++ * configuration LED that is set by the bootloader.
++ *
++ * Parameters : [OUT] pusValue - Address of short word that the reset
++ * configuration LED GPIO pin is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetBootloaderResetCfgLedGpio( unsigned short *pusValue );
++
++/**************************************************************************
++ * Name : BpGetBootloaderStopLedGpio
++ *
++ * Description: This function returns the GPIO pin assignment for the break
++ * into bootloader LED that is set by the bootloader.
++ *
++ * Parameters : [OUT] pusValue - Address of short word that the break into
++ * bootloader LED GPIO pin is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetBootloaderStopLedGpio( unsigned short *pusValue );
++
++/**************************************************************************
++ * Name : BpGetWirelessExtIntr
++ *
++ * Description: This function returns the Wireless external interrupt number.
++ *
++ * Parameters : [OUT] pulValue - Address of short word that the wireless
++ * external interrupt number is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetWirelessExtIntr( unsigned long *pulValue );
++
++/**************************************************************************
++ * Name : BpGetAdslDyingGaspExtIntr
++ *
++ * Description: This function returns the ADSL Dying Gasp external interrupt
++ * number.
++ *
++ * Parameters : [OUT] pulValue - Address of short word that the ADSL Dying Gasp
++ * external interrupt number is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetAdslDyingGaspExtIntr( unsigned long *pulValue );
++
++/**************************************************************************
++ * Name : BpGetVoipExtIntr
++ *
++ * Description: This function returns the VOIP external interrupt number.
++ *
++ * Parameters : [OUT] pulValue - Address of short word that the VOIP
++ * external interrupt number is returned in.
++ * [IN] dspNum - Address of the DSP to query.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetVoipExtIntr( unsigned char dspNum, unsigned long *pulValue );
++
++/**************************************************************************
++ * Name : BpGetHpnaExtIntr
++ *
++ * Description: This function returns the HPNA external interrupt number.
++ *
++ * Parameters : [OUT] pulValue - Address of short word that the HPNA
++ * external interrupt number is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetHpnaExtIntr( unsigned long *pulValue );
++
++/**************************************************************************
++ * Name : BpGetHpnaChipSelect
++ *
++ * Description: This function returns the HPNA chip select number.
++ *
++ * Parameters : [OUT] pulValue - Address of short word that the HPNA
++ * chip select number is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetHpnaChipSelect( unsigned long *pulValue );
++
++/**************************************************************************
++ * Name : BpGetVoipChipSelect
++ *
++ * Description: This function returns the VOIP chip select number.
++ *
++ * Parameters : [OUT] pulValue - Address of short word that the VOIP
++ * chip select number is returned in.
++ * [IN] dspNum - Address of the DSP to query.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetVoipChipSelect( unsigned char dspNum, unsigned long *pulValue );
++
++#endif /* __ASSEMBLER__ */
++
++#if __cplusplus
++}
++#endif
++
++#endif /* _BOARDPARMS_H */
++
+--- linux-2.6.8.1/scripts/kconfig/mconf.c 2004-08-14 12:54:51.000000000 +0200
++++ linux-2.6.8.1-brcm63xx/scripts/kconfig/mconf.c 2006-06-26 10:07:52.000000000 +0200
+@@ -88,7 +88,7 @@
+ static int indent;
+ static struct termios ios_org;
+ static int rows = 0, cols = 0;
+-static struct menu *current_menu;
++struct menu *current_menu; /* Fails while cross-compiling if keeping static */
+ static int child_count;
+ static int do_resize;
+ static int single_menu_mode;
+--- linux-2.6.8.1/Makefile 2004-08-14 12:55:35.000000000 +0200
++++ linux-2.6.8.1-brcm63xx/Makefile 2006-06-26 10:43:09.000000000 +0200
+@@ -149,9 +149,7 @@
+ # then ARCH is assigned, getting whatever value it gets normally, and
+ # SUBARCH is subsequently ignored.
+
+-SUBARCH := $(shell uname -m | sed -e s/i.86/i386/ -e s/sun4u/sparc64/ \
+- -e s/arm.*/arm/ -e s/sa110/arm/ \
+- -e s/s390x/s390/ -e s/parisc64/parisc/ )
++SUBARCH := mips
+
+ # Cross compiling and selecting different set of gcc/bin-utils
+ # ---------------------------------------------------------------------------
+@@ -294,7 +292,7 @@
+
+ NOSTDINC_FLAGS = -nostdinc -iwithprefix include
+
+-CPPFLAGS := -D__KERNEL__ -Iinclude \
++CPPFLAGS := -D__KERNEL__ -Iinclude -Ibcmdrivers/opensource/include/bcm963xx/ -Iboardparms/bcm963xx/ -Ibcmdrivers/broadcom/include/bcm963xx/ -Ibcmdrivers/broadcom/char/adsl/bcm96348\
+ $(if $(KBUILD_SRC),-Iinclude2 -I$(srctree)/include)
+
+ CFLAGS := -Wall -Wstrict-prototypes -Wno-trigraphs \
+@@ -405,6 +403,13 @@
+ core-y := usr/
+ endif # KBUILD_EXTMOD
+
++# CONFIG_MIPS_BRCM Begin Broadcom changed code.
++BRCMDRIVERS_DIR := $(TOPDIR)/bcmdrivers
++export HPATH := $(TOPDIR)/include
++brcmdrivers-y := $(TOPDIR)/boardparms/bcm963xx/ $(BRCMDRIVERS_DIR)/
++BRCMDRIVERS := $(brcmdrivers-y)
++# CONFIG_MIPS_BRCM End Broadcom changed code.
++
+ ifeq ($(dot-config),1)
+ # In this section, we need .config
+
+@@ -473,6 +478,10 @@
+ # makefile but the arguement can be passed to make if needed.
+ #
+
++# CONFIG_MIPS_BRCM Begin Broadcom changed code.
++INSTALL_MOD_PATH := $(PROFILE_DIR)/modules
++# CONFIG_MIPS_BRCM End Broadcom changed code.
++
+ MODLIB := $(INSTALL_MOD_PATH)/lib/modules/$(KERNELRELEASE)
+ export MODLIB
+
+@@ -480,18 +489,25 @@
+ ifeq ($(KBUILD_EXTMOD),)
+ core-y += kernel/ mm/ fs/ ipc/ security/ crypto/
+
++# CONFIG_MIPS_BRCM Begin Broadcom changed code.
+ vmlinux-dirs := $(patsubst %/,%,$(filter %/, $(init-y) $(init-m) \
+ $(core-y) $(core-m) $(drivers-y) $(drivers-m) \
++ $(brcmdrivers-y) $(brcmdrivers-m) \
+ $(net-y) $(net-m) $(libs-y) $(libs-m)))
+
+ vmlinux-alldirs := $(sort $(vmlinux-dirs) $(patsubst %/,%,$(filter %/, \
+ $(init-n) $(init-) \
+ $(core-n) $(core-) $(drivers-n) $(drivers-) \
++ $(brcmdrivers-n) $(brcmdrivers-) \
+ $(net-n) $(net-) $(libs-n) $(libs-))))
++# CONFIG_MIPS_BRCM End Broadcom changed code.
+
+ init-y := $(patsubst %/, %/built-in.o, $(init-y))
+ core-y := $(patsubst %/, %/built-in.o, $(core-y))
+ drivers-y := $(patsubst %/, %/built-in.o, $(drivers-y))
++# CONFIG_MIPS_BRCM Begin Broadcom changed code.
++brcmdrivers-y := $(patsubst %/, %/built-in.o, $(brcmdrivers-y))
++# CONFIG_MIPS_BRCM End Broadcom changed code.
+ net-y := $(patsubst %/, %/built-in.o, $(net-y))
+ libs-y1 := $(patsubst %/, %/lib.a, $(libs-y))
+ libs-y2 := $(patsubst %/, %/built-in.o, $(libs-y))
+@@ -507,7 +523,8 @@
+ # we cannot yet know if we will need to relink vmlinux.
+ # So we descend into init/ inside the rule for vmlinux again.
+ head-y += $(HEAD)
+-vmlinux-objs := $(head-y) $(init-y) $(core-y) $(libs-y) $(drivers-y) $(net-y)
++# CONFIG_MIPS_BRCM Begin Broadcom changed code.
++vmlinux-objs := $(head-y) $(init-y) $(core-y) $(libs-y) $(drivers-y) $(brcmdrivers-y) $(net-y)
+
+ quiet_cmd_vmlinux__ = LD $@
+ define cmd_vmlinux__
+@@ -516,11 +533,13 @@
+ $(core-y) \
+ $(libs-y) \
+ $(drivers-y) \
++ $(brcmdrivers-y) \
+ $(net-y) \
+ --end-group \
+ $(filter .tmp_kallsyms%,$^) \
+ -o $@
+ endef
++# CONFIG_MIPS_BRCM End Broadcom changed code.
+
+ # set -e makes the rule exit immediately on error
+
+@@ -603,9 +622,12 @@
+ $(rule_verify_kallsyms)
+ endef
+
+-vmlinux: $(vmlinux-objs) $(kallsyms.o) arch/$(ARCH)/kernel/vmlinux.lds.s FORCE
++# CONFIG_MIPS_BRCM Begin Broadcom changed code.
++vmlinux: preparebrcmdriver $(vmlinux-objs) $(kallsyms.o) arch/$(ARCH)/kernel/vmlinux.lds.s FORCE
+ $(call if_changed_rule,vmlinux)
+
++# CONFIG_MIPS_BRCM End Broadcom changed code.
++
+ # The actual objects are generated when descending,
+ # make sure no implicit rule kicks in
+
+@@ -626,7 +648,13 @@
+ # A multi level approach is used. prepare1 is updated first, then prepare0.
+ # prepare-all is the collection point for the prepare targets.
+
+-.PHONY: prepare-all prepare prepare0 prepare1 prepare2
++# CONFIG_MIPS_BRCM Begin Broadcom changed code.
++.PHONY: prepare-all prepare prepare0 prepare1 prepare2 preparebrcmdriver
++
++preparebrcmdriver:
++# $(Q)$(MAKE) -C $(BRCMDRIVERS_DIR)/opensource symlinks
++ $(Q)$(MAKE) -C $(BRCMDRIVERS_DIR)/broadcom symlinks
++# CONFIG_MIPS_BRCM End Broadcom changed code.
+
+ # prepare 2 generate Makefile to be placed in output directory, if
+ # using a seperate output directory. This allows convinient use
+@@ -743,7 +771,10 @@
+ # Build modules
+
+ .PHONY: modules
+-modules: $(vmlinux-dirs) $(if $(KBUILD_BUILTIN),vmlinux)
++# CONFIG_MIPS_BRCM Begin Broadcom changed code.
++modules: preparebrcmdriver $(vmlinux-dirs) $(if $(KBUILD_BUILTIN),vmlinux)
++#modules: $(vmlinux-dirs) $(if $(KBUILD_BUILTIN),vmlinux)
++# CONFIG_MIPS_BRCM End Broadcom changed code.
+ @echo ' Building modules, stage 2.';
+ $(Q)$(MAKE) -rR -f $(srctree)/scripts/Makefile.modpost
+
+@@ -754,23 +785,31 @@
+
+ # Target to install modules
+ .PHONY: modules_install
+-modules_install: _modinst_ _modinst_post
++# CONFIG_MIPS_BRCM Begin Broadcom changed code.
++#modules_install: _modinst_ _modinst_post
++#We have no need for it "_modinst_post"
++modules_install: _modinst_
++# CONFIG_MIPS_BRCM End Broadcom changed code.
+
+ .PHONY: _modinst_
+ _modinst_:
+- @if [ -z "`$(DEPMOD) -V | grep module-init-tools`" ]; then \
+- echo "Warning: you may need to install module-init-tools"; \
+- echo "See http://www.codemonkey.org.uk/docs/post-halloween-2.6.txt";\
+- sleep 1; \
+- fi
++# CONFIG_MIPS_BRCM Begin Broadcom changed code.
++# @if [ -z "`$(DEPMOD) -V | grep module-init-tools`" ]; then \
++# echo "Warning: you may need to install module-init-tools"; \
++# echo "See http://www.codemonkey.org.uk/docs/post-halloween-2.6.txt";\
++# sleep 1; \
++# fi
++# CONFIG_MIPS_BRCM End Broadcom changed code.
+ @rm -rf $(MODLIB)/kernel
+ @rm -f $(MODLIB)/source
+ @mkdir -p $(MODLIB)/kernel
+- @ln -s $(srctree) $(MODLIB)/source
+- @if [ ! $(objtree) -ef $(MODLIB)/build ]; then \
+- rm -f $(MODLIB)/build ; \
+- ln -s $(objtree) $(MODLIB)/build ; \
+- fi
++# CONFIG_MIPS_BRCM Begin Broadcom changed code
++# @ln -s $(srctree) $(MODLIB)/source
++# @if [ ! $(objtree) -ef $(MODLIB)/build ]; then \
++# rm -f $(MODLIB)/build ; \
++# ln -s $(objtree) $(MODLIB)/build ; \
++# fi
++# CONFIG_MIPS_BRCM End Broadcom changed code.
+ $(Q)$(MAKE) -rR -f $(srctree)/scripts/Makefile.modinst
+
+ # If System.map exists, run depmod. This deliberately does not have a
+@@ -853,10 +892,12 @@
+ clean: archclean $(clean-dirs)
+ $(call cmd,rmdirs)
+ $(call cmd,rmfiles)
++# CONFIG_MIPS_BRCM Begin Broadcom changed code.
+ @find . $(RCS_FIND_IGNORE) \
+ \( -name '*.[oas]' -o -name '*.ko' -o -name '.*.cmd' \
+ -o -name '.*.d' -o -name '.*.tmp' -o -name '*.mod.c' \) \
+ -type f -print | xargs rm -f
++# CONFIG_MIPS_BRCM End Broadcom changed code.
+
+ # mrproper - Delete all generated files, including .config
+ #
+@@ -883,7 +924,7 @@
+ -o -name '.*.rej' -o -size 0 \
+ -o -name '*%' -o -name '.*.cmd' -o -name 'core' \) \
+ -type f -print | xargs rm -f
+-
++ rm vmlinux.bin vmlinux.lz
+
+ # Packaging of the kernel to various formats
+ # ---------------------------------------------------------------------------
projects / openwrt / staging / jow.git / commitdiff