--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+
+#include "mt7622.dtsi"
+#include "mt6380.dtsi"
+
+/ {
+ model = "Xiaomi Redmi Router AX6S";
+ compatible = "xiaomi,redmi-router-ax6s", "mediatek,mt7622";
+
+ aliases {
+ serial0 = &uart0;
+ led-boot = &led_power_amber;
+ led-failsafe = &led_power_amber;
+ led-running = &led_power_blue;
+ led-upgrade = &led_power_blue;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ bootargs = "earlycon=uart8250,mmio32,0x11002000 console=ttyS0,115200n8 swiotlb=512";
+ };
+
+ memory {
+ reg = <0 0x40000000 0 0x8000000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_power_blue: power_blue {
+ label = "blue:power";
+ gpios = <&pio 18 GPIO_ACTIVE_LOW>;
+ };
+
+ led_power_amber: power_amber {
+ label = "amber:power";
+ gpios = <&pio 17 GPIO_ACTIVE_LOW>;
+ };
+
+ led_net_blue: net_blue {
+ label = "blue:net";
+ gpios = <&pio 01 GPIO_ACTIVE_LOW>;
+ };
+
+ led_net_amber: net_amber {
+ label = "amber:net";
+ gpios = <&pio 16 GPIO_ACTIVE_LOW>;
+ };
+
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ gpios = <&pio 0 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ mesh {
+ label = "mesh";
+ gpios = <&pio 102 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_9>;
+ linux,input-type = <EV_SW>;
+ };
+ };
+};
+
+&cpu0 {
+ proc-supply = <&mt6380_vcpu_reg>;
+ sram-supply = <&mt6380_vm_reg>;
+};
+
+&cpu1 {
+ proc-supply = <&mt6380_vcpu_reg>;
+ sram-supply = <&mt6380_vm_reg>;
+};
+
+&pio {
+ eth_pins: eth-pins {
+ mux {
+ function = "eth";
+ groups = "mdc_mdio", "rgmii_via_gmac2";
+ };
+ };
+
+ pcie0_pins: pcie0-pins {
+ mux {
+ function = "pcie";
+ groups = "pcie0_pad_perst",
+ "pcie0_1_waken",
+ "pcie0_1_clkreq";
+ };
+ };
+
+ pmic_bus_pins: pmic-bus-pins {
+ mux {
+ function = "pmic";
+ groups = "pmic_bus";
+ };
+ };
+
+ pwm7_pins: pwm1-2-pins {
+ mux {
+ function = "pwm";
+ groups = "pwm_ch7_2";
+ };
+ };
+
+ /* Serial NAND is shared pin with SPI-NOR */
+ serial_nand_pins: serial-nand-pins {
+ mux {
+ function = "flash";
+ groups = "snfi";
+ };
+ };
+
+ uart0_pins: uart0-pins {
+ mux {
+ function = "uart";
+ groups = "uart0_0_tx_rx" ;
+ };
+ };
+
+ watchdog_pins: watchdog-pins {
+ mux {
+ function = "watchdog";
+ groups = "watchdog";
+ };
+ };
+};
+
+ð {
+ pinctrl-names = "default";
+ pinctrl-0 = <ð_pins>;
+ status = "okay";
+
+ gmac0: mac@0 {
+ compatible = "mediatek,eth-mac";
+ reg = <0>;
+
+ phy-connection-type = "2500base-x";
+
+ nvmem-cells = <&macaddr_factory_4>;
+ nvmem-cell-names = "mac-address";
+ mac-address-increment = <(-1)>;
+
+ fixed-link {
+ speed = <2500>;
+ full-duplex;
+ pause;
+ };
+ };
+
+ mdio-bus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ switch@0 {
+ compatible = "mediatek,mt7531";
+ reg = <0>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&pio>;
+ interrupts = <53 IRQ_TYPE_LEVEL_HIGH>;
+ reset-gpios = <&pio 54 GPIO_ACTIVE_HIGH>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ wan: port@1 {
+ reg = <1>;
+ label = "wan";
+ };
+
+ port@2 {
+ reg = <2>;
+ label = "lan1";
+ };
+
+ port@3 {
+ reg = <3>;
+ label = "lan2";
+ };
+
+ port@4 {
+ reg = <4>;
+ label = "lan3";
+ };
+
+ port@6 {
+ reg = <6>;
+ label = "cpu";
+ ethernet = <&gmac0>;
+ phy-mode = "2500base-x";
+
+ fixed-link {
+ speed = <2500>;
+ full-duplex;
+ pause;
+ };
+ };
+ };
+ };
+ };
+};
+
+&snand {
+ pinctrl-names = "default";
+ pinctrl-0 = <&serial_nand_pins>;
+ status = "okay";
+
+ mediatek,bmt-v2;
+ mediatek,bmt-table-size = <0x1000>;
+ mediatek,bmt-remap-range = <0x0 0x6c0000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "Preloader";
+ reg = <0x0 0x80000>;
+ read-only;
+ };
+
+ partition@80000 {
+ label = "ATF";
+ reg = <0x80000 0x40000>;
+ read-only;
+ };
+
+ partition@c0000 {
+ label = "u-boot";
+ reg = <0xc0000 0x80000>;
+ read-only;
+ };
+
+ partition@140000 {
+ label = "u-boot-env";
+ reg = <0x140000 0x40000>;
+ };
+
+ partition@180000 {
+ label = "bdata";
+ reg = <0x180000 0x40000>;
+ };
+
+ factory: partition@1c0000 {
+ label = "factory";
+ reg = <0x1c0000 0x80000>;
+ read-only;
+
+ compatible = "nvmem-cells";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ macaddr_factory_4: macaddr@4 {
+ reg = <0x4 0x6>;
+ };
+ };
+
+ partition@240000 {
+ label = "crash";
+ reg = <0x240000 0x40000>;
+ read-only;
+ };
+
+ partition@280000 {
+ label = "crash_log";
+ reg = <0x280000 0x40000>;
+ read-only;
+ };
+
+ /* Shrunk and renamed from "firmware"
+ * as to not break luci size checks
+ */
+ partition@2c0000 {
+ label = "kernel";
+ compatible = "denx,fit";
+ reg = <0x2c0000 0x400000>;
+ };
+
+
+ /* ubi partition is the result of squashing
+ * consecutive stock partitions:
+ * - firmware (partially)
+ * - firmware1
+ * - overlay
+ * - obr
+ */
+ partition@6c0000 {
+ label = "ubi";
+ reg = <0x6C0000 0x6f00000>;
+ };
+ };
+};
+
+&pcie0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie0_pins>;
+ status = "okay";
+};
+
+&slot0 {
+ status = "okay";
+
+ wifi@0,0 {
+ compatible = "mediatek,mt76";
+ reg = <0x0000 0 0 0 0>;
+ mediatek,mtd-eeprom = <&factory 0x5000>;
+ ieee80211-freq-limit = <5000000 6000000>;
+ };
+};
+
+&pwm {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm7_pins>;
+ status = "okay";
+};
+
+&pwrap {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_bus_pins>;
+ status = "okay";
+};
+
+&rtc {
+ status = "disabled";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins>;
+ status = "okay";
+};
+
+&watchdog {
+ pinctrl-names = "default";
+ pinctrl-0 = <&watchdog_pins>;
+ status = "okay";
+};
+
+&wmac {
+ status = "okay";
+
+ mediatek,mtd-eeprom = <&factory 0x0>;
+};
projects / openwrt / staging / ynezz.git / commitdiff