ath79: add support for TP-Link Archer A7

This patch adds support for TP-Link Archer A7

Specification:
- SOC: QCA9563
- Flash: 16 MiB (SPI)
- RAM: 128 MiB (DDR2)
- Ethernet: 4x 1Gbps LAN + 1x 1Gbps WAN
- Wireless:
  - 2.4GHz (bgn) SoC internal
  - 5GHz (ac) QCA988x
- USB: 1x USB 2.0 port
- Button: 1x power, 1x reset, 1x wps
- LED: 10x LEDs
- UART: holes in PCB
  - Vcc, GND, RX, TX from ethernet port side
  - 115200n8

Flash instructions:

Upload openwrt-ath79-generic-tplink_archer-a7-v5-squashfs-factory.bin
via the Webinterface.

Flash instruction using tftp recovery:

1. Connect the computer to one of the LAN ports of the Archer A7
2. Set the computer IP to 192.168.0.66
3. Start a tftp server with the OpenWrt factory image in the tftp
   root directory renamed to ArcherC7v5_tp_recovery.bin
2. Connect power cable to Archer A7, press and hold the reset button
   and turn the router on
3. Keep the reset button pressed for ~5 seconds
4. Wait ~150 seconds to complete flashing

Changes since first revision:

  - Flash instructions using stock image webinterface
  - Changed "Version 5" in model string to "v5"
  - Split DTS file in qca9563_tplink_archer-x7-v5.dtsi
    and qca9563_tplink_archer-a7-v5.dts
  - Firmware image is now build with dynamic partitioning
  - Default to ath10k-ct

Changes since second revision:
  - Changed uboot@0 to uboot@20000 in DTS file
  - Fixed ordering issue in board led script
  - Specify firmware partition format in DTS file
  - Rebased Makefile device definition on common
    Device/tplink-safeloader-uimage definition
  - Merged switch section in network script
    (same configuration as tplink,tl-wdr3600
    and tplink,tl-wdr4300)

Signed-off-by: Karl-Felix Glatzer <karl.glatzer@gmx.de>

diff --git a/src/tplink-safeloader.c b/src/tplink-safeloader.c
index 2959a212f805c059f89f37fe9d30448c4b9c27d3..358247e6267858119dbba4965592fdf4d7bb2d3d 100644 (file)
--- a/src/tplink-safeloader.c
+++ b/src/tplink-safeloader.c
@@ -357,6 +357,46 @@ static struct device_info boards[] = {
                .last_sysupgrade_partition = "file-system"
        },
 
+       /** Firmware layout for the A7-V5 */
+       {
+               .id = "ARCHER-A7-V5",
+               .support_list =
+                       "SupportList:\n"
+                       "{product_name:Archer A7,product_ver:5.0.0,special_id:45550000}\n"
+                       "{product_name:Archer A7,product_ver:5.0.0,special_id:55530000}\n"
+                       "{product_name:Archer A7,product_ver:5.0.0,special_id:43410000}\n"
+                       "{product_name:Archer A7,product_ver:5.0.0,special_id:4A500000}\n"
+                       "{product_name:Archer A7,product_ver:5.0.0,special_id:54570000}\n",
+               .support_trail = '\x00',
+               .soft_ver = "soft_ver:1.0.0\n",
+
+               /* We're using a dynamic kernel/rootfs split here */
+               .partitions = {
+                       {"factory-boot", 0x00000, 0x20000},
+                       {"fs-uboot", 0x20000, 0x20000},
+                       {"firmware", 0x40000, 0xec0000},        /* Stock: name os-image base 0x40000 size 0x120000 */
+                                                               /* Stock: name file-system base 0x160000 size 0xda0000 */
+                       {"default-mac", 0xf40000, 0x00200},
+                       {"pin", 0xf40200, 0x00200},
+                       {"device-id", 0xf40400, 0x00100},
+                       {"product-info", 0xf40500, 0x0fb00},
+                       {"soft-version", 0xf50000, 0x00100},
+                       {"extra-para", 0xf51000, 0x01000},
+                       {"support-list", 0xf52000, 0x0a000},
+                       {"profile", 0xf5c000, 0x04000},
+                       {"default-config", 0xf60000, 0x10000},
+                       {"user-config", 0xf70000, 0x40000},
+                       {"certificate", 0xfb0000, 0x10000},
+                       {"partition-table", 0xfc0000, 0x10000},
+                       {"log", 0xfd0000, 0x20000},
+                       {"radio", 0xff0000, 0x10000},
+                       {NULL, 0, 0}
+               },
+
+               .first_sysupgrade_partition = "os-image",
+               .last_sysupgrade_partition = "file-system",
+       },
+
        /** Firmware layout for the C25v1 */
        {
                .id = "ARCHER-C25-V1",
@@ -1581,7 +1621,7 @@ static void build_image(const char *output,
            strcasecmp(info->id, "TLWR1043NV5") == 0) {
                const char mdat[11] = {0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00};
                parts[5] = put_data("extra-para", mdat, 11);
-       } else if (strcasecmp(info->id, "ARCHER-C7-V4") == 0 || strcasecmp(info->id, "ARCHER-C7-V5") == 0) {
+       } else if (strcasecmp(info->id, "ARCHER-A7-V5") == 0 || strcasecmp(info->id, "ARCHER-C7-V4") == 0 || strcasecmp(info->id, "ARCHER-C7-V5") == 0) {
                const char mdat[11] = {0x01, 0x00, 0x00, 0x02, 0x00, 0x00, 0xca, 0x00, 0x01, 0x00, 0x00};
                parts[5] = put_data("extra-para", mdat, 11);
        }