--- /dev/null
+/* Intel Ethernet Switch Host Interface Driver
+ * Copyright(c) 2013 - 2014 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Contact Information:
+ * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ */
+
+#include "fm10k.h"
+
+#ifdef CONFIG_DCB
+/**
+ * fm10k_dcbnl_ieee_getets - get the ETS configuration for the device
+ * @dev: netdev interface for the device
+ * @ets: ETS structure to push configuration to
+ **/
+static int fm10k_dcbnl_ieee_getets(struct net_device *dev, struct ieee_ets *ets)
+{
+ int i;
+
+ /* we support 8 TCs in all modes */
+ ets->ets_cap = IEEE_8021QAZ_MAX_TCS;
+ ets->cbs = 0;
+
+ /* we only support strict priority and cannot do traffic shaping */
+ memset(ets->tc_tx_bw, 0, sizeof(ets->tc_tx_bw));
+ memset(ets->tc_rx_bw, 0, sizeof(ets->tc_rx_bw));
+ memset(ets->tc_tsa, IEEE_8021QAZ_TSA_STRICT, sizeof(ets->tc_tsa));
+
+ /* populate the prio map based on the netdev */
+ for (i = 0; i < IEEE_8021QAZ_MAX_TCS; i++)
+ ets->prio_tc[i] = netdev_get_prio_tc_map(dev, i);
+
+ return 0;
+}
+
+/**
+ * fm10k_dcbnl_ieee_setets - set the ETS configuration for the device
+ * @dev: netdev interface for the device
+ * @ets: ETS structure to pull configuration from
+ **/
+static int fm10k_dcbnl_ieee_setets(struct net_device *dev, struct ieee_ets *ets)
+{
+ u8 num_tc = 0;
+ int i, err;
+
+ /* verify type and determine num_tcs needed */
+ for (i = 0; i < IEEE_8021QAZ_MAX_TCS; i++) {
+ if (ets->tc_tx_bw[i] || ets->tc_rx_bw[i])
+ return -EINVAL;
+ if (ets->tc_tsa[i] != IEEE_8021QAZ_TSA_STRICT)
+ return -EINVAL;
+ if (ets->prio_tc[i] > num_tc)
+ num_tc = ets->prio_tc[i];
+ }
+
+ /* if requested TC is greater than 0 then num_tcs is max + 1 */
+ if (num_tc)
+ num_tc++;
+
+ if (num_tc > IEEE_8021QAZ_MAX_TCS)
+ return -EINVAL;
+
+ /* update TC hardware mapping if necessary */
+ if (num_tc != netdev_get_num_tc(dev)) {
+ err = fm10k_setup_tc(dev, num_tc);
+ if (err)
+ return err;
+ }
+
+ /* update priority mapping */
+ for (i = 0; i < IEEE_8021QAZ_MAX_TCS; i++)
+ netdev_set_prio_tc_map(dev, i, ets->prio_tc[i]);
+
+ return 0;
+}
+
+/**
+ * fm10k_dcbnl_ieee_getpfc - get the PFC configuration for the device
+ * @dev: netdev interface for the device
+ * @pfc: PFC structure to push configuration to
+ **/
+static int fm10k_dcbnl_ieee_getpfc(struct net_device *dev, struct ieee_pfc *pfc)
+{
+ struct fm10k_intfc *interface = netdev_priv(dev);
+
+ /* record flow control max count and state of TCs */
+ pfc->pfc_cap = IEEE_8021QAZ_MAX_TCS;
+ pfc->pfc_en = interface->pfc_en;
+
+ return 0;
+}
+
+/**
+ * fm10k_dcbnl_ieee_setpfc - set the PFC configuration for the device
+ * @dev: netdev interface for the device
+ * @pfc: PFC structure to pull configuration from
+ **/
+static int fm10k_dcbnl_ieee_setpfc(struct net_device *dev, struct ieee_pfc *pfc)
+{
+ struct fm10k_intfc *interface = netdev_priv(dev);
+
+ /* record PFC configuration to interface */
+ interface->pfc_en = pfc->pfc_en;
+
+ /* if we are running update the drop_en state for all queues */
+ if (netif_running(dev))
+ fm10k_update_rx_drop_en(interface);
+
+ return 0;
+}
+
+/**
+ * fm10k_dcbnl_ieee_getdcbx - get the DCBX configuration for the device
+ * @dev: netdev interface for the device
+ *
+ * Returns that we support only IEEE DCB for this interface
+ **/
+static u8 fm10k_dcbnl_getdcbx(struct net_device *dev)
+{
+ return DCB_CAP_DCBX_HOST | DCB_CAP_DCBX_VER_IEEE;
+}
+
+/**
+ * fm10k_dcbnl_ieee_setdcbx - get the DCBX configuration for the device
+ * @dev: netdev interface for the device
+ * @mode: new mode for this device
+ *
+ * Returns error on attempt to enable anything but IEEE DCB for this interface
+ **/
+static u8 fm10k_dcbnl_setdcbx(struct net_device *dev, u8 mode)
+{
+ return (mode != (DCB_CAP_DCBX_HOST | DCB_CAP_DCBX_VER_IEEE)) ? 1 : 0;
+}
+
+static const struct dcbnl_rtnl_ops fm10k_dcbnl_ops = {
+ .ieee_getets = fm10k_dcbnl_ieee_getets,
+ .ieee_setets = fm10k_dcbnl_ieee_setets,
+ .ieee_getpfc = fm10k_dcbnl_ieee_getpfc,
+ .ieee_setpfc = fm10k_dcbnl_ieee_setpfc,
+
+ .getdcbx = fm10k_dcbnl_getdcbx,
+ .setdcbx = fm10k_dcbnl_setdcbx,
+};
+
+#endif /* CONFIG_DCB */
+/**
+ * fm10k_dcbnl_set_ops - Configures dcbnl ops pointer for netdev
+ * @dev: netdev interface for the device
+ *
+ * Enables PF for DCB by assigning DCBNL ops pointer.
+ **/
+void fm10k_dcbnl_set_ops(struct net_device *dev)
+{
+#ifdef CONFIG_DCB
+ struct fm10k_intfc *interface = netdev_priv(dev);
+ struct fm10k_hw *hw = &interface->hw;
+
+ if (hw->mac.type == fm10k_mac_pf)
+ dev->dcbnl_ops = &fm10k_dcbnl_ops;
+#endif /* CONFIG_DCB */
+}
projects / openwrt / staging / blogic.git / commitdiff